Daniel Machon [Tue, 7 Mar 2023 11:21:03 +0000 (12:21 +0100)]
net: microchip: sparx5: fix deletion of existing DSCP mappings
Fix deletion of existing DSCP mappings in the APP table.
Adding and deleting DSCP entries are replicated per-port, since the
mapping table is global for all ports in the chip. Whenever a mapping
for a DSCP value already exists, the old mapping is deleted first.
However, it is only deleted for the specified port. Fix this by calling
sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be.
Reproduce:
// Map and remap DSCP value 63
$ dcb app add dev eth0 dscp-prio 63:1
$ dcb app add dev eth0 dscp-prio 63:2
$ dcb app show dev eth0 dscp-prio
dscp-prio 63:2
$ dcb app show dev eth1 dscp-prio
dscp-prio 63:1 63:2 <-- 63:1 should not be there
Fixes:
8dcf69a64118 ("net: microchip: sparx5: add support for offloading dscp table")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suman Ghosh [Tue, 7 Mar 2023 10:49:08 +0000 (16:19 +0530)]
octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.
Fixes:
4a3581cd5995 ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
D. Wythe [Tue, 7 Mar 2023 03:23:46 +0000 (11:23 +0800)]
net/smc: fix fallback failed while sendmsg with fastopen
Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.
For the application, the general usages of MSG_FASTOPEN likes
fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)
Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.
Fixes:
ee9dfbef02d1 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 6 Mar 2023 20:04:57 +0000 (12:04 -0800)]
ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
I was intending to make all the Netlink Spec code BSD-3-Clause
to ease the adoption but it appears that:
- I fumbled the uAPI and used "GPL WITH uAPI note" there
- it gives people pause as they expect GPL in the kernel
As suggested by Chuck re-license under dual. This gives us benefit
of full BSD freedom while fulfilling the broad "kernel is under GPL"
expectations.
Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/
Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stephen Hemminger [Mon, 6 Mar 2023 19:44:05 +0000 (11:44 -0800)]
mailmap: update entries for Stephen Hemminger
Map all my old email addresses to current address.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20230306194405.108236-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 6 Mar 2023 19:20:18 +0000 (11:20 -0800)]
mailmap: add entry for Maxim Mikityanskiy
Map Maxim's old corporate addresses to his personal one.
Link: https://lore.kernel.org/r/20230306192018.3894988-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fedor Pchelkin [Mon, 6 Mar 2023 21:26:50 +0000 (00:26 +0300)]
nfc: change order inside nfc_se_io error path
cb_context should be freed on the error path in nfc_se_io as stated by
commit
25ff6f8a5a3b ("nfc: fix memory leak of se_io context in
nfc_genl_se_io").
Make the error path in nfc_se_io unwind everything in reverse order, i.e.
free the cb_context after unlocking the device.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enrico Sau [Mon, 6 Mar 2023 12:05:28 +0000 (13:05 +0100)]
net: usb: qmi_wwan: add Telit 0x1080 composition
Add the following Telit FE990 composition:
0x1080: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enrico Sau [Mon, 6 Mar 2023 11:59:33 +0000 (12:59 +0100)]
net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990
0x1081 composition in order to avoid bind error.
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306115933.198259-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Tue, 7 Mar 2023 12:52:03 +0000 (13:52 +0100)]
Merge branch 'main' of git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restore ctnetlink zero mark in events and dump, from Ivan Delalande.
2) Fix deadlock due to missing disabled bh in tproxy, from Florian Westphal.
3) Safer maximum chain load in conntrack, from Eric Dumazet.
* 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: adopt safer max chain length
netfilter: tproxy: fix deadlock due to missing BH disable
netfilter: ctnetlink: revert to dumping mark regardless of event type
====================
Link: https://lore.kernel.org/r/20230307100424.2037-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Tue, 7 Mar 2023 05:22:54 +0000 (05:22 +0000)]
netfilter: conntrack: adopt safer max chain length
Customers using GKE 1.25 and 1.26 are facing conntrack issues
root caused to commit
c9c3b6811f74 ("netfilter: conntrack: make
max chain length random").
Even if we assume Uniform Hashing, a bucket often reachs 8 chained
items while the load factor of the hash table is smaller than 0.5
With a limit of 16, we reach load factors of 3.
With a limit of 32, we reach load factors of 11.
With a limit of 40, we reach load factors of 15.
With a limit of 50, we reach load factors of 24.
This patch changes MIN_CHAINLEN to 50, to minimize risks.
Ideally, we could in the future add a cushion based on expected
load factor (2 * nf_conntrack_max / nf_conntrack_buckets),
because some setups might expect unusual values.
Fixes:
c9c3b6811f74 ("netfilter: conntrack: make max chain length random")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jakub Kicinski [Tue, 7 Mar 2023 04:28:00 +0000 (20:28 -0800)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-06
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 9 files changed, 64 insertions(+), 18 deletions(-).
The main changes are:
1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier,
that is, keep resolving such instances instead of bailing out,
from Lorenz Bauer.
2) Fix BPF test framework with regards to xdp_frame info misplacement
in the "live packet" code, from Alexander Lobakin.
3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX,
from Liu Jian.
4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n,
from Randy Dunlap.
5) Several BPF doc fixes with either broken links or external instead
of internal doc links, from Bagas Sanjaya.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: check that modifier resolves after pointer
btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES
bpf, doc: Link to submitting-patches.rst for general patch submission info
bpf, doc: Do not link to docs.kernel.org for kselftest link
bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
riscv, bpf: Fix patch_text implicit declaration
bpf, docs: Fix link to BTF doc
====================
Link: https://lore.kernel.org/r/20230306215944.11981-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 4 Mar 2023 19:26:10 +0000 (11:26 -0800)]
net: tls: fix device-offloaded sendpage straddling records
Adrien reports that incorrect data is transmitted when a single
page straddles multiple records. We would transmit the same
data in all iterations of the loop.
Reported-by: Adrien Moulin <amoulin@corp.free.fr>
Link: https://lore.kernel.org/all/61481278.42813558.1677845235112.JavaMail.zimbra@corp.free.fr
Fixes:
c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()")
Tested-by: Adrien Moulin <amoulin@corp.free.fr>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230304192610.3818098-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle [Sat, 4 Mar 2023 13:43:20 +0000 (13:43 +0000)]
net: ethernet: mtk_eth_soc: fix RX data corruption issue
Fix data corruption issue with SerDes connected PHYs operating at 1.25
Gbps speed where we could previously observe about 30% packet loss while
the bad packet counter was increasing.
As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531
switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using
rate-adaptation to 2500Base-X mode, this issue only got exposed now when
we started trying to use SFP modules operating with 1.25 Gbps with the
BananaPi R3 board.
The fix is to set bit 12 which disables the RX FIFO clear function when
setting up MAC MCR, MediaTek SDK did the same change stating:
"If without this patch, kernel might receive invalid packets that are
corrupted by GMAC."[1]
[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/
d8a2975939a12686c4a95c40db21efdc3f821f63
Fixes:
42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Sat, 4 Mar 2023 10:52:44 +0000 (11:52 +0100)]
net: phy: smsc: fix link up detection in forced irq mode
Currently link up can't be detected in forced mode if polling
isn't used. Only link up interrupt source we have is aneg
complete which isn't applicable in forced mode. Therefore we
have to use energy-on as link up indicator.
Fixes:
7365494550f6 ("net: phy: smsc: skip ENERGYON interrupt if disabled")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Mon, 6 Mar 2023 19:44:14 +0000 (11:44 -0800)]
Merge branch 'fix resolving VAR after DATASEC'
Lorenz Bauer says:
====================
See the first patch for a detailed explanation.
v2:
- Move RESOLVE_TBD assignment out of the loop (Martin)
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Lorenz Bauer [Mon, 6 Mar 2023 11:21:38 +0000 (11:21 +0000)]
selftests/bpf: check that modifier resolves after pointer
Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-3-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Lorenz Bauer [Mon, 6 Mar 2023 11:21:37 +0000 (11:21 +0000)]
btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
btf_datasec_resolve contains a bug that causes the following BTF
to fail loading:
[1] DATASEC a size=2 vlen=2
type_id=4 offset=0 size=1
type_id=7 offset=1 size=1
[2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[3] PTR (anon) type_id=2
[4] VAR a type_id=3 linkage=0
[5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[6] TYPEDEF td type_id=5
[7] VAR b type_id=6 linkage=0
This error message is printed during btf_check_all_types:
[1] DATASEC a size=2 vlen=2
type_id=7 offset=1 size=1 Invalid type
By tracing btf_*_resolve we can pinpoint the problem:
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0
btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22
The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.
if (!env_type_is_resolve_sink(env, var_type) &&
!env_type_is_resolved(env, var_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, var_type, var_type_id);
}
env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:
(btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved()
Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.
if (!btf_type_id_size(btf, &type_id, &type_size)) {
btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
return -EINVAL;
}
Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.
To summarise, the following conditions are necessary:
- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
TYPE_TAG
The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.
Fixes:
1dc92851849c ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Alexander Lobakin [Fri, 24 Feb 2023 16:36:07 +0000 (17:36 +0100)]
bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES
&xdp_buff and &xdp_frame are bound in a way that
xdp_buff->data_hard_start == xdp_frame
It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:
for (u32 i = 0; i < 0xdead; i++) {
xdpf = xdp_convert_buff_to_frame(&xdp);
xdp_convert_frame_to_buff(xdpf, &xdp);
}
shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.
Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.
Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.
(was found while testing XDP traffic generator on ice, which calls
xdp_convert_frame_to_buff() for each XDP frame)
Fixes:
b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230224163607.2994755-1-aleksander.lobakin@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Bagas Sanjaya [Tue, 28 Feb 2023 07:45:23 +0000 (14:45 +0700)]
bpf, doc: Link to submitting-patches.rst for general patch submission info
The link for patch submission information in general refers to index
page for "Working with the kernel development community" section of
kernel docs, whereas the link should have been
Documentation/process/submitting-patches.rst instead.
Fix it by replacing the index target with the appropriate doc.
Fixes:
542228384888f5 ("bpf, doc: convert bpf_devel_QA.rst to use RST formatting")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230228074523.11493-3-bagasdotme@gmail.com
Bagas Sanjaya [Tue, 28 Feb 2023 07:45:22 +0000 (14:45 +0700)]
bpf, doc: Do not link to docs. for kselftest link
The question on how to run BPF selftests have a reference link to kernel
selftest documentation (Documentation/dev-tools/kselftest.rst). However,
it uses external link to the documentation at kernel.org/docs (aka
docs.kernel.org) instead, which requires Internet access.
Fix this and replace the link with internal linking, by using :doc: directive
while keeping the anchor text.
Fixes:
b7a27c3aafa252 ("bpf, doc: howto use/run the BPF selftests")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230228074523.11493-2-bagasdotme@gmail.com
Florian Westphal [Fri, 3 Mar 2023 09:58:56 +0000 (10:58 +0100)]
netfilter: tproxy: fix deadlock due to missing BH disable
The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.
Functions that are called from either xtables or nftables must assume
that they can be called in process context.
inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.
Add a small helper that takes care of this and use it.
Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes:
4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ivan Delalande [Fri, 3 Mar 2023 01:48:31 +0000 (17:48 -0800)]
netfilter: ctnetlink: revert to dumping mark regardless of event type
It seems that change was unintentional, we have userspace code that
needs the mark while listening for events like REPLY, DESTROY, etc.
Also include 0-marks in requested dumps, as they were before that fix.
Fixes:
1feeae071507 ("netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Selvin Xavier [Sat, 4 Mar 2023 02:43:58 +0000 (18:43 -0800)]
bnxt_en: Fix the double free during device removal
Following warning reported by KASAN during driver unload
==================================================================
BUG: KASAN: double-free in bnxt_remove_one+0x103/0x200 [bnxt_en]
Free of addr
ffff88814e8dd4c0 by task rmmod/17469
CPU: 47 PID: 17469 Comm: rmmod Kdump: loaded Tainted: G S 6.2.0-rc7+ #2
Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.3.10 08/15/2019
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
print_report+0x17b/0x4b3
? __call_rcu_common.constprop.79+0x27e/0x8c0
? __pfx_free_object_rcu+0x10/0x10
? __virt_addr_valid+0xe3/0x160
? bnxt_remove_one+0x103/0x200 [bnxt_en]
kasan_report_invalid_free+0x64/0xd0
? bnxt_remove_one+0x103/0x200 [bnxt_en]
? bnxt_remove_one+0x103/0x200 [bnxt_en]
__kasan_slab_free+0x179/0x1c0
? bnxt_remove_one+0x103/0x200 [bnxt_en]
__kmem_cache_free+0x194/0x350
bnxt_remove_one+0x103/0x200 [bnxt_en]
pci_device_remove+0x62/0x110
device_release_driver_internal+0xf6/0x1c0
driver_detach+0x76/0xe0
bus_remove_driver+0x89/0x160
pci_unregister_driver+0x26/0x110
? strncpy_from_user+0x188/0x1c0
bnxt_exit+0xc/0x24 [bnxt_en]
__x64_sys_delete_module+0x21f/0x390
? __pfx___x64_sys_delete_module+0x10/0x10
? __pfx_mem_cgroup_handle_over_high+0x10/0x10
? _raw_spin_lock+0x87/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __audit_syscall_entry+0x185/0x210
? ktime_get_coarse_real_ts64+0x51/0x80
? syscall_trace_enter.isra.18+0x126/0x1a0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7effcb6fd71b
Code: 73 01 c3 48 8b 0d 6d 17 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 17 2c 00 f7 d8 64 89 01 48
RSP: 002b:
00007ffeada270b8 EFLAGS:
00000206 ORIG_RAX:
00000000000000b0
RAX:
ffffffffffffffda RBX:
00005623660e0750 RCX:
00007effcb6fd71b
RDX:
000000000000000a RSI:
0000000000000800 RDI:
00005623660e07b8
RBP:
0000000000000000 R08:
00007ffeada26031 R09:
0000000000000000
R10:
00007effcb771280 R11:
0000000000000206 R12:
00007ffeada272e0
R13:
00007ffeada28bc4 R14:
00005623660e02a0 R15:
00005623660e0750
</TASK>
Auxiliary device structures are freed in bnxt_aux_dev_release. So avoid
calling kfree from bnxt_remove_one.
Also, set bp->edev to NULL before freeing the auxilary private structure.
Fixes:
d80d88b0dfff ("bnxt_en: Add auxiliary driver support")
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 4 Mar 2023 02:43:57 +0000 (18:43 -0800)]
bnxt_en: Avoid order-5 memory allocation for TPA data
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO)
completions on the aggregation ring. On P5 chips, the maximum number
of concurrent TPA is 256 and the amount of memory we allocate is order-5
on systems using 4K pages. Memory allocation failure has been reported:
NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1
Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022
Call Trace:
dump_stack+0x57/0x6e
warn_alloc.cold.120+0x7b/0xdd
? _cond_resched+0x15/0x30
? __alloc_pages_direct_compact+0x15f/0x170
__alloc_pages_slowpath.constprop.108+0xc58/0xc70
__alloc_pages_nodemask+0x2d0/0x300
kmalloc_order+0x24/0xe0
kmalloc_order_trace+0x19/0x80
bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en]
? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en]
__bnxt_open_nic+0x12e/0x780 [bnxt_en]
bnxt_open+0x10b/0x240 [bnxt_en]
__dev_open+0xe9/0x180
__dev_change_flags+0x1af/0x220
dev_change_flags+0x21/0x60
do_setlink+0x35c/0x1100
Instead of allocating this big chunk of memory and dividing it up for the
concurrent TPA instances, allocate each small chunk separately for each
TPA instance. This will reduce it to order-0 allocations.
Fixes:
79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Fri, 3 Mar 2023 16:37:54 +0000 (16:37 +0000)]
net: phylib: get rid of unnecessary locking
The locking in phy_probe() and phy_remove() does very little to prevent
any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA
warnings. Remove it.
======================================================
WARNING: possible circular locking dependency detected
6.2.0-dirty #1108 Tainted: G W E
------------------------------------------------------
ip/415 is trying to acquire lock:
ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy]
but task is already holding lock:
ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (rtnl_mutex){+.+.}-{3:3}:
__lock_acquire+0x35c/0x6c0
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x84
__mutex_lock+0x8c/0x414
mutex_lock_nested+0x34/0x40
rtnl_lock+0x24/0x30
sfp_bus_add_upstream+0x34/0x150
phy_sfp_probe+0x4c/0x94 [libphy]
mv3310_probe+0x148/0x184 [marvell10g]
phy_probe+0x8c/0x200 [libphy]
call_driver_probe+0xbc/0x15c
really_probe+0xc0/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__device_attach_driver+0xc4/0x160
bus_for_each_drv+0x80/0xe0
__device_attach+0xb0/0x1f0
device_initial_probe+0x1c/0x2c
bus_probe_device+0xa4/0xb0
device_add+0x360/0x53c
phy_device_register+0x60/0xa4 [libphy]
fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio]
fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio]
of_mdiobus_register+0x140/0x340 [of_mdio]
orion_mdio_probe+0x298/0x3c0 [mvmdio]
platform_probe+0x70/0xe0
call_driver_probe+0x34/0x15c
really_probe+0xc0/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__driver_attach+0x104/0x210
bus_for_each_dev+0x78/0xdc
driver_attach+0x2c/0x3c
bus_add_driver+0x184/0x240
driver_register+0x80/0x13c
__platform_driver_register+0x30/0x3c
xt_compat_calc_jump+0x28/0xa4 [x_tables]
do_one_initcall+0x50/0x1b0
do_init_module+0x50/0x1fc
load_module+0x684/0x744
__do_sys_finit_module+0xc4/0x140
__arm64_sys_finit_module+0x28/0x34
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x6c/0x1b0
do_el0_svc+0x34/0x44
el0_svc+0x48/0xf0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x1a0/0x1a4
-> #0 (&dev->lock){+.+.}-{3:3}:
check_prev_add+0xb4/0xc80
validate_chain+0x414/0x47c
__lock_acquire+0x35c/0x6c0
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x84
__mutex_lock+0x8c/0x414
mutex_lock_nested+0x34/0x40
phy_attach_direct+0x17c/0x3a0 [libphy]
phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink]
phylink_fwnode_phy_connect+0x48/0x60 [phylink]
mvpp2_open+0xec/0x2e0 [mvpp2]
__dev_open+0x104/0x214
__dev_change_flags+0x1d4/0x254
dev_change_flags+0x2c/0x7c
do_setlink+0x254/0xa50
__rtnl_newlink+0x430/0x514
rtnl_newlink+0x58/0x8c
rtnetlink_rcv_msg+0x17c/0x560
netlink_rcv_skb+0x64/0x150
rtnetlink_rcv+0x20/0x30
netlink_unicast+0x1d4/0x2b4
netlink_sendmsg+0x1a4/0x400
____sys_sendmsg+0x228/0x290
___sys_sendmsg+0x88/0xec
__sys_sendmsg+0x70/0xd0
__arm64_sys_sendmsg+0x2c/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x6c/0x1b0
do_el0_svc+0x34/0x44
el0_svc+0x48/0xf0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x1a0/0x1a4
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock(&dev->lock);
lock(rtnl_mutex);
lock(&dev->lock);
*** DEADLOCK ***
Fixes:
298e54fa810e ("net: phy: add core phylib sfp support")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rongguang Wei [Thu, 2 Mar 2023 06:21:43 +0000 (14:21 +0800)]
net: stmmac: add to set device wake up flag when stmmac init phy
When MAC is not support PMT, driver will check PHY's WoL capability
and set device wakeup capability in stmmac_init_phy(). We can enable
the WoL through ethtool, the driver would enable the device wake up
flag. Now the device_may_wakeup() return true.
But if there is a way which enable the PHY's WoL capability derectly,
like in BIOS. The driver would not know the enable thing and would not
set the device wake up flag. The phy_suspend may failed like this:
[ 32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16
[ 32.409065] PM: Device stmmac-1:00 failed to suspend: error -16
[ 32.409067] PM: Some devices failed to suspend, or early wake event detected
Add to set the device wakeup enable flag according to the get_wol
function result in PHY can fix the error in this scene.
v2: add a Fixes tag.
Fixes:
1d8e5b0f3f2c ("net: stmmac: Support WOL with phy")
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Liu Jian [Fri, 3 Mar 2023 08:09:46 +0000 (16:09 +0800)]
bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
When the buffer length of the recvmsg system call is 0, we got the
flollowing soft lockup problem:
watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149]
CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:remove_wait_queue+0xb/0xc0
Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20
RSP: 0018:
ffff88811b5978b8 EFLAGS:
00000246
RAX:
0000000000000000 RBX:
ffff88811a7d3780 RCX:
ffffffffb7a4d768
RDX:
dffffc0000000000 RSI:
ffff88811b597908 RDI:
ffff888115408040
RBP:
1ffff110236b2f1b R08:
0000000000000000 R09:
ffff88811a7d37e7
R10:
ffffed10234fa6fc R11:
0000000000000001 R12:
ffff88811179b800
R13:
0000000000000001 R14:
ffff88811a7d38a8 R15:
ffff88811a7d37e0
FS:
00007f6fb5398740(0000) GS:
ffff888237180000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000000 CR3:
000000010b6ba002 CR4:
0000000000370ee0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
tcp_msg_wait_data+0x279/0x2f0
tcp_bpf_recvmsg_parser+0x3c6/0x490
inet_recvmsg+0x280/0x290
sock_recvmsg+0xfc/0x120
____sys_recvmsg+0x160/0x3d0
___sys_recvmsg+0xf0/0x180
__sys_recvmsg+0xea/0x1a0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
The logic in tcp_bpf_recvmsg_parser is as follows:
msg_bytes_ready:
copied = sk_msg_recvmsg(sk, psock, msg, len, flags);
if (!copied) {
wait data;
goto msg_bytes_ready;
}
In this case, "copied" always is 0, the infinite loop occurs.
According to the Linux system call man page, 0 should be returned in this
case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly
return. Also modify several other functions with the same problem.
Fixes:
1f5be6b3b063 ("udp: Implement udp_bpf_recvmsg() for sockmap")
Fixes:
9825d866ce0d ("af_unix: Implement unix_dgram_bpf_recvmsg()")
Fixes:
c5d2177a72a1 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Fixes:
604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230303080946.1146638-1-liujian56@huawei.com
David S. Miller [Fri, 3 Mar 2023 08:28:44 +0000 (08:28 +0000)]
Merge branch 'nfp-ipsec-csum'
Simon Horman says:
====================
nfp: fix incorrect IPsec checksum handling
this short series resolves two problems with IPsec checksum handling
in the nfp driver.
* PATCH 1/3, 2/3: Correct setting of checksum flags.
One patch for each of the nfd3 and nfdk datapaths.
* Patch 3/3: Correct configuration of NETIF_F_CSUM_MASK
so that the stack does not unecessarily calculate csums for
IPsec offload packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Huanhuan Wang [Thu, 2 Mar 2023 09:58:30 +0000 (10:58 +0100)]
nfp: fix esp-tx-csum-offload doesn't take effect
When esp-tx-csum-offload is set to on, the protocol stack shouldn't
calculate the IPsec offload packet's csum, but it does. Because the
callback `.ndo_features_check` incorrectly masked NETIF_F_CSUM_MASK bit.
Fixes:
57f273adbcd4 ("nfp: add framework to support ipsec offloading")
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huanhuan Wang [Thu, 2 Mar 2023 09:58:29 +0000 (10:58 +0100)]
nfp: fix incorrectly set csum flag for nfdk path
The csum flag of IPsec packet are set repeatedly. Therefore, the csum
flag set of IPsec and non-IPsec packet need to be distinguished.
As the ipv6 header does not have a csum field, so l3-csum flag is not
required to be set for ipv6 case.
Fixes:
436396f26d50 ("nfp: support IPsec offloading for NFP3800")
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huanhuan Wang [Thu, 2 Mar 2023 09:58:28 +0000 (10:58 +0100)]
nfp: fix incorrectly set csum flag for nfd3 path
The csum flag of IPsec packet are set repeatedly. Therefore, the csum
flag set of IPsec and non-IPsec packet need to be distinguished.
As the ipv6 header does not have a csum field, so l3-csum flag is not
required to be set for ipv6 case.
L4-csum flag include the tcp csum flag and udp csum flag, we shouldn't
set the udp and tcp csum flag at the same time for one packet, should
set l4-csum flag according to the transport layer is tcp or udp.
Fixes:
57f273adbcd4 ("nfp: add framework to support ipsec offloading")
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Oros [Wed, 1 Mar 2023 20:47:07 +0000 (21:47 +0100)]
ice: copy last block omitted in ice_get_module_eeprom()
ice_get_module_eeprom() is broken since commit
e9c9692c8a81 ("ice:
Reimplement module reads used by ethtool") In this refactor,
ice_get_module_eeprom() reads the eeprom in blocks of size 8.
But the condition that should protect the buffer overflow
ignores the last block. The last block always contains zeros.
Bug uncovered by ethtool upstream commit
9538f384b535
("netlink: eeprom: Defer page requests to individual parsers")
After this commit, ethtool reads a block with length = 1;
to read the SFF-8024 identifier value.
unpatched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 00 00 00 00 00 00
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00
$
$ ethtool -m enp65s0f0np0
Offset Values
------ ------
0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00
0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
patched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78
$ ethtool -m enp65s0f0np0
Identifier : 0x11 (QSFP28)
Extended identifier : 0x00
Extended identifier description : 1.5W max. Power consumption
Extended identifier description : No CDR in TX, No CDR in RX
Extended identifier description : High Power Class (> 3.5 W) not enabled
Connector : 0x23 (No separable connector)
Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Transceiver type : 40G Ethernet: 40G Base-CR4
Transceiver type : 25G Ethernet: 25G Base-CR CA-N
Encoding : 0x05 (64B/66B)
BR, Nominal : 25500Mbps
Rate identifier : 0x00
Length (SMF,km) : 0km
Length (OM3 50um) : 0m
Length (OM2 50um) : 0m
Length (OM1 62.5um) : 0m
Length (Copper or Active cable) : 1m
Transmitter technology : 0xa0 (Copper cable unequalized)
Attenuation at 2.5GHz : 4db
Attenuation at 5.0GHz : 5db
Attenuation at 7.0GHz : 7db
Attenuation at 12.9GHz : 10db
........
....
Fixes:
e9c9692c8a81 ("ice: Reimplement module reads used by ethtool")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 3 Mar 2023 08:22:39 +0000 (08:22 +0000)]
Merge branch 'net-tools-ynl-fixes'
Jakub Kicinski says:
====================
tools: ynl: fix subset use and change default value for attrs/ops
Fix a problem in subsetting, which will become apparent when
the devlink family comes after the merge window. Even tho none
of the existing families need this, we don't want someone to
get "inspired" by the current, incorrect code when using specs
in other languages.
Change the default value for the first attr/op. This is a slight
behavior change so needs to go in now. The diffstat of the last
patch should serve as the clearest justification there..
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 1 Mar 2023 18:36:42 +0000 (10:36 -0800)]
netlink: specs: update for codegen enumerating from 1
Now that the codegen rules had been changed we can update
the specs to reflect the new default.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 1 Mar 2023 18:36:41 +0000 (10:36 -0800)]
tools: ynl: use 1 as the default for first entry in attrs/ops
Pretty much all families use value: 1 or reserve as unspec
the first entry in attribute set and the first operation.
Make this the default. Update documentation (the doc for
values of operations just refers back to doc for attrs
so updating only attrs).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 1 Mar 2023 18:36:40 +0000 (10:36 -0800)]
tools: ynl: fully inherit attrs in subsets
To avoid having to repeat the entire definition of an attribute
(including the value) use the Attr object from the original set.
In fact this is already the documented expectation.
Fixes:
be5bea1cc0bf ("net: add basic C code generators for Netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Mar 2023 06:25:09 +0000 (22:25 -0800)]
Merge tag 'ieee802154-for-net-2023-03-02' of git://git./linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
ieee802154 for net 2023-03-02
Two small fixes this time.
Alexander Aring fixed a potential negative array access in the ca8210
driver.
Miquel Raynal fixed a crash that could have been triggered through
the extended netlink API for 802154. This only came in this merge window.
Found by syzkaller.
* tag 'ieee802154-for-net-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: Prevent user from crashing the host
ca8210: fix mac_len negative array access
====================
Link: https://lore.kernel.org/r/20230302153032.1312755-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shigeru Yoshida [Wed, 1 Mar 2023 16:39:13 +0000 (01:39 +0900)]
net: caif: Fix use-after-free in cfusbl_device_notify()
syzbot reported use-after-free in cfusbl_device_notify() [1]. This
causes a stack trace like below:
BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr
ffff88807ac4e6f0 by task kworker/u4:6/1214
CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10227 [inline]
netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341
default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334
ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
When unregistering a net device, unregister_netdevice_many_notify()
sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers
with NETDEV_UNREGISTER, and adds the device to the todo list.
Later on, devices in the todo list are processed by netdev_run_todo().
netdev_run_todo() waits devices' reference count become 1 while
rebdoadcasting NETDEV_UNREGISTER notification.
When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple
times, the parent device might be freed. This could cause UAF.
Processing NETDEV_UNREGISTER multiple times also causes inbalance of
reference count for the module.
This patch fixes the issue by accepting only first NETDEV_UNREGISTER
notification.
Fixes:
7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")
CC: sjur.brandeland@stericsson.com <sjur.brandeland@stericsson.com>
Reported-by: syzbot+b563d33852b893653a9e@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230301163913.391304-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yuiko Oshino [Wed, 1 Mar 2023 15:43:07 +0000 (08:43 -0700)]
net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver
Move the LAN7800 internal phy (phy ID 0x0007c132) specific register
accesses to the phy driver (microchip.c).
Fix the error reported by Enguerrand de Ribaucourt in December 2022,
"Some operations during the cable switch workaround modify the register
LAN88XX_INT_MASK of the PHY. However, this register is specific to the
LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801,
that register (0x19), corresponds to the LED and MAC address
configuration, resulting in unapropriate behavior."
I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800
with the internal PHY.
Fixes:
14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Miquel Raynal [Wed, 1 Mar 2023 15:44:50 +0000 (16:44 +0100)]
ieee802154: Prevent user from crashing the host
Avoid crashing the machine by checking
info->attrs[NL802154_ATTR_SCAN_TYPE] presence before de-referencing it,
which was the primary intend of the blamed patch.
Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes:
a0b6106672b5 ("ieee802154: Convert scan error messages to extack")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230301154450.547716-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Alexander Aring [Fri, 17 Feb 2023 04:25:04 +0000 (23:25 -0500)]
ca8210: fix mac_len negative array access
This patch fixes a buffer overflow access of skb->data if
ieee802154_hdr_peek_addrs() fails.
Reported-by: lianhui tang <bluetlh@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230217042504.3303396-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Brian Vazquez [Wed, 1 Mar 2023 13:32:47 +0000 (13:32 +0000)]
net: use indirect calls helpers for sk_exit_memory_pressure()
Florian reported a regression and sent a patch with the following
changelog:
<quote>
There is a noticeable tcp performance regression (loopback or cross-netns),
seen with iperf3 -Z (sendfile mode) when generic retpolines are needed.
With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave
memory pressure happen much more often. For TCP indirect calls are
used.
We can't remove the if-set-return short-circuit check in
tcp_enter_memory_pressure because there are callers other than
sk_enter_memory_pressure. Doing a check in the sk wrapper too
reduces the indirect calls enough to recover some performance.
Before,
0.00-60.00 sec 322 GBytes 46.1 Gbits/sec receiver
After:
0.00-60.04 sec 359 GBytes 51.4 Gbits/sec receiver
"iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns.
</quote>
It seems we forgot to upstream this indirect call mitigation we
had for years, lets do this instead.
[edumazet] - It seems we forgot to upstream this indirect call
mitigation we had for years, let's do this instead.
- Changed to INDIRECT_CALL_INET_1() to avoid bots reports.
Fixes:
4890b686f408 ("net: keep sk->sk_forward_alloc as small as possible")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301133247.2346111-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 2 Mar 2023 10:10:43 +0000 (11:10 +0100)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus error report in selftests/netfilter/nft_nat.sh,
from Hangbin Liu.
2) Initialize last and quota expressions from template when
expr_ops::clone is called, otherwise, states are not restored
accordingly when loading a dynamic set with elements using
these two expressions.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_quota: copy content when cloning expression
netfilter: nft_last: copy content when cloning expression
selftests: nft_nat: ensuring the listening side is up before starting the client
====================
Link: https://lore.kernel.org/r/20230301222021.154670-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Wed, 1 Mar 2023 00:28:57 +0000 (16:28 -0800)]
net: tls: avoid hanging tasks on the tx_lock
syzbot sent a hung task report and Eric explains that adversarial
receiver may keep RWIN at 0 for a long time, so we are not guaranteed
to make forward progress. Thread which took tx_lock and went to sleep
may not release tx_lock for hours. Use interruptible sleep where
possible and reschedule the work if it can't take the lock.
Testing: existing selftest passes
Reported-by: syzbot+9c0268252b8ef967c62e@syzkaller.appspotmail.com
Fixes:
79ffe6087e91 ("net/tls: add a TX lock")
Link: https://lore.kernel.org/all/000000000000e412e905f5b46201@google.com/
Cc: stable@vger.kernel.org # wait 4 weeks
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301002857.2101894-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangyu Hua [Tue, 28 Feb 2023 02:33:44 +0000 (10:33 +0800)]
net: tls: fix possible race condition between do_tls_getsockopt_conf() and do_tls_setsockopt_conf()
ctx->crypto_send.info is not protected by lock_sock in
do_tls_getsockopt_conf(). A race condition between do_tls_getsockopt_conf()
and error paths of do_tls_setsockopt_conf() may lead to a use-after-free
or null-deref.
More discussion: https://lore.kernel.org/all/Y/ht6gQL+u6fj3dG@hog/
Fixes:
3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20230228023344.9623-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso [Tue, 28 Feb 2023 19:43:02 +0000 (20:43 +0100)]
netfilter: nft_quota: copy content when cloning expression
If the ruleset contains consumed quota, restore them accordingly.
Otherwise, listing after restoration shows never used items.
Restore the user-defined quota and flags too.
Fixes:
ed0a0c60f0e5 ("netfilter: nft_quota: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Tue, 28 Feb 2023 16:09:03 +0000 (17:09 +0100)]
netfilter: nft_last: copy content when cloning expression
If the ruleset contains last timestamps, restore them accordingly.
Otherwise, listing after restoration shows never used items.
Fixes:
33a24de37e81 ("netfilter: nft_last: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Hangbin Liu [Mon, 27 Feb 2023 09:36:46 +0000 (17:36 +0800)]
selftests: nft_nat: ensuring the listening side is up before starting the client
The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.
Before the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
ERROR: inet port rewrite
After the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
PASS: inet port rewrite without l3 address
Fixes:
282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Horatiu Vultur [Tue, 28 Feb 2023 20:47:42 +0000 (21:47 +0100)]
net: lan966x: Fix port police support using tc-matchall
When the police was removed from the port, then it was trying to
remove the police from the police id and not from the actual
police index.
The police id represents the id of the police and police index
represents the position in HW where the police is situated.
The port police id can be any number while the port police index
is a number based on the port chip port.
Fix this by deleting the police from HW that is situated at the
police index and not police id.
Fixes:
5390334b59a3 ("net: lan966x: Add port police support using tc-matchall")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 27 Feb 2023 18:44:36 +0000 (18:44 +0000)]
net/sched: flower: fix fl_change() error recovery path
The two "goto errout;" paths in fl_change() became wrong
after cited commit.
Indeed we only must not call __fl_put() until the net pointer
has been set in tcf_exts_init_ex()
This is a minimal fix. We might in the future validate TCA_FLOWER_FLAGS
before we allocate @fnew.
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:72 [inline]
BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline]
BUG: KASAN: null-ptr-deref in refcount_read include/linux/refcount.h:147 [inline]
BUG: KASAN: null-ptr-deref in __refcount_add_not_zero include/linux/refcount.h:152 [inline]
BUG: KASAN: null-ptr-deref in __refcount_inc_not_zero include/linux/refcount.h:227 [inline]
BUG: KASAN: null-ptr-deref in refcount_inc_not_zero include/linux/refcount.h:245 [inline]
BUG: KASAN: null-ptr-deref in maybe_get_net include/net/net_namespace.h:269 [inline]
BUG: KASAN: null-ptr-deref in tcf_exts_get_net include/net/pkt_cls.h:260 [inline]
BUG: KASAN: null-ptr-deref in __fl_put net/sched/cls_flower.c:513 [inline]
BUG: KASAN: null-ptr-deref in __fl_put+0x13e/0x3b0 net/sched/cls_flower.c:508
Read of size 4 at addr
000000000000014c by task syz-executor548/5082
CPU: 0 PID: 5082 Comm: syz-executor548 Not tainted 6.2.0-syzkaller-05251-g5b7c4cabbb65 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_report mm/kasan/report.c:420 [inline]
kasan_report+0xec/0x130 mm/kasan/report.c:517
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x141/0x190 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:72 [inline]
atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline]
refcount_read include/linux/refcount.h:147 [inline]
__refcount_add_not_zero include/linux/refcount.h:152 [inline]
__refcount_inc_not_zero include/linux/refcount.h:227 [inline]
refcount_inc_not_zero include/linux/refcount.h:245 [inline]
maybe_get_net include/net/net_namespace.h:269 [inline]
tcf_exts_get_net include/net/pkt_cls.h:260 [inline]
__fl_put net/sched/cls_flower.c:513 [inline]
__fl_put+0x13e/0x3b0 net/sched/cls_flower.c:508
fl_change+0x101b/0x4ab0 net/sched/cls_flower.c:2341
tc_new_tfilter+0x97c/0x2290 net/sched/cls_api.c:2310
rtnetlink_rcv_msg+0x996/0xd50 net/core/rtnetlink.c:6165
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2574
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:722 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:745
____sys_sendmsg+0x334/0x900 net/socket.c:2504
___sys_sendmsg+0x110/0x1b0 net/socket.c:2558
__sys_sendmmsg+0x18f/0x460 net/socket.c:2644
__do_sys_sendmmsg net/socket.c:2673 [inline]
__se_sys_sendmmsg net/socket.c:2670 [inline]
__x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2670
Fixes:
08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier")
Reported-by: syzbot+baabf3efa7c1e57d28b2@syzkaller.appspotmail.com
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 27 Feb 2023 15:30:24 +0000 (15:30 +0000)]
ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()
ila_xlat_nl_cmd_get_mapping() generates an empty skb,
triggerring a recent sanity check [1].
Instead, return an error code, so that user space
can get it.
[1]
skb_assert_len
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline]
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
Modules linked in:
CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate:
60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_assert_len include/linux/skbuff.h:2527 [inline]
pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
lr : skb_assert_len include/linux/skbuff.h:2527 [inline]
lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
sp :
ffff80001e0d6c40
x29:
ffff80001e0d6e60 x28:
dfff800000000000 x27:
ffff0000c86328c0
x26:
dfff800000000000 x25:
ffff0000c8632990 x24:
ffff0000c8632a00
x23:
0000000000000000 x22:
1fffe000190c6542 x21:
ffff0000c8632a10
x20:
ffff0000c8632a00 x19:
ffff80001856e000 x18:
ffff80001e0d5fc0
x17:
0000000000000000 x16:
ffff80001235d16c x15:
0000000000000000
x14:
0000000000000000 x13:
0000000000000001 x12:
0000000000000001
x11:
ff80800008353a30 x10:
0000000000000000 x9 :
21567eaf25bfb600
x8 :
21567eaf25bfb600 x7 :
0000000000000001 x6 :
0000000000000001
x5 :
ffff80001e0d6558 x4 :
ffff800015c74760 x3 :
ffff800008596744
x2 :
0000000000000001 x1 :
0000000100000000 x0 :
000000000000000e
Call trace:
skb_assert_len include/linux/skbuff.h:2527 [inline]
__dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
dev_queue_xmit include/linux/netdevice.h:3033 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline]
__netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325
netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1283 [inline]
netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292
netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380
nlmsg_unicast include/net/netlink.h:1099 [inline]
genlmsg_unicast include/net/genetlink.h:433 [inline]
genlmsg_reply include/net/genetlink.h:443 [inline]
ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x558/0x844 net/socket.c:2479
___sys_sendmsg net/socket.c:2533 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2562
__do_sys_sendmsg net/socket.c:2571 [inline]
__se_sys_sendmsg net/socket.c:2569 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
irq event stamp: 136484
hardirqs last enabled at (136483): [<
ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345
hardirqs last disabled at (136484): [<
ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405
softirqs last enabled at (136418): [<
ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline]
softirqs last enabled at (136418): [<
ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600
softirqs last disabled at (136371): [<
ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
---[ end trace
0000000000000000 ]---
skb len=0 headroom=0 headlen=0 tailroom=192
mac=(0,0) net=(0,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0
dev name=nlmon0 feat=0x0000000000005861
Fixes:
7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pedro Tammela [Mon, 27 Feb 2023 15:23:52 +0000 (12:23 -0300)]
net/sched: act_connmark: handle errno on tcf_idr_check_alloc
Smatch reports that 'ci' can be used uninitialized.
The current code ignores errno coming from tcf_idr_check_alloc, which
will lead to the incorrect usage of 'ci'. Handle the errno as it should.
Fixes:
288864effe33 ("net/sched: act_connmark: transition to percpu stats and rcu")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 27 Feb 2023 14:17:06 +0000 (14:17 +0000)]
net: avoid skb end_offset change in __skb_unclone_keeptruesize()
Once initial skb->head has been allocated from skb_small_head_cache,
we need to make sure to use the same strategy whenever skb->head
has to be re-allocated, as found by syzbot [1]
This means kmalloc_reserve() can not fallback from using
skb_small_head_cache to generic (power-of-two) kmem caches.
It seems that we probably want to rework things in the future,
to partially revert following patch, because we no longer use
ksize() for skb allocated in TX path.
2b88cba55883 ("net: preserve skb_end_offset() in skb_unclone_keeptruesize()")
Ideally, TCP stack should never put payload in skb->head,
this effort has to be completed.
In the mean time, add a sanity check.
[1]
BUG: KASAN: invalid-free in slab_free mm/slub.c:3787 [inline]
BUG: KASAN: invalid-free in kmem_cache_free+0xee/0x5c0 mm/slub.c:3809
Free of addr
ffff88806cdee800 by task syz-executor239/5189
CPU: 0 PID: 5189 Comm: syz-executor239 Not tainted 6.2.0-rc8-syzkaller-02400-gd1fabc68f8e0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:306 [inline]
print_report+0x15e/0x45d mm/kasan/report.c:417
kasan_report_invalid_free+0x9b/0x1b0 mm/kasan/report.c:482
____kasan_slab_free+0x1a5/0x1c0 mm/kasan/common.c:216
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1781 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1807
slab_free mm/slub.c:3787 [inline]
kmem_cache_free+0xee/0x5c0 mm/slub.c:3809
skb_kfree_head net/core/skbuff.c:857 [inline]
skb_kfree_head net/core/skbuff.c:853 [inline]
skb_free_head+0x16f/0x1a0 net/core/skbuff.c:872
skb_release_data+0x57a/0x820 net/core/skbuff.c:901
skb_release_all net/core/skbuff.c:966 [inline]
__kfree_skb+0x4f/0x70 net/core/skbuff.c:980
tcp_wmem_free_skb include/net/tcp.h:302 [inline]
tcp_rtx_queue_purge net/ipv4/tcp.c:3061 [inline]
tcp_write_queue_purge+0x617/0xcf0 net/ipv4/tcp.c:3074
tcp_v4_destroy_sock+0x125/0x810 net/ipv4/tcp_ipv4.c:2302
inet_csk_destroy_sock+0x19a/0x440 net/ipv4/inet_connection_sock.c:1195
__tcp_close+0xb96/0xf50 net/ipv4/tcp.c:3021
tcp_close+0x2d/0xc0 net/ipv4/tcp.c:3033
inet_release+0x132/0x270 net/ipv4/af_inet.c:426
__sock_release+0xcd/0x280 net/socket.c:651
sock_close+0x1c/0x20 net/socket.c:1393
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x23c/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f2511f546c3
Code: c7 c2 c0 ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8
RSP: 002b:
00007ffef0103d48 EFLAGS:
00000246 ORIG_RAX:
0000000000000003
RAX:
0000000000000000 RBX:
0000000000000004 RCX:
00007f2511f546c3
RDX:
0000000000000978 RSI:
00000000200000c0 RDI:
0000000000000003
RBP:
0000000000000000 R08:
0000000000000002 R09:
0000000000003434
R10:
0000000000000000 R11:
0000000000000246 R12:
00007ffef0103d6c
R13:
00007ffef0103d80 R14:
00007ffef0103dc0 R15:
0000000000000003
</TASK>
Allocated by task 5189:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
____kasan_kmalloc mm/kasan/common.c:333 [inline]
__kasan_kmalloc+0xa5/0xb0 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slab_common.c:968 [inline]
__kmalloc_node_track_caller+0x5b/0xc0 mm/slab_common.c:988
kmalloc_reserve+0xf1/0x230 net/core/skbuff.c:539
pskb_expand_head+0x237/0x1160 net/core/skbuff.c:1995
__skb_unclone_keeptruesize+0x93/0x220 net/core/skbuff.c:2094
skb_unclone_keeptruesize include/linux/skbuff.h:1910 [inline]
skb_prepare_for_shift net/core/skbuff.c:3804 [inline]
skb_shift+0xef8/0x1e20 net/core/skbuff.c:3877
tcp_skb_shift net/ipv4/tcp_input.c:1538 [inline]
tcp_shift_skb_data net/ipv4/tcp_input.c:1646 [inline]
tcp_sacktag_walk+0x93b/0x18a0 net/ipv4/tcp_input.c:1713
tcp_sacktag_write_queue+0x1599/0x31d0 net/ipv4/tcp_input.c:1974
tcp_ack+0x2e9f/0x5a10 net/ipv4/tcp_input.c:3847
tcp_rcv_established+0x667/0x2230 net/ipv4/tcp_input.c:6006
tcp_v4_do_rcv+0x670/0x9b0 net/ipv4/tcp_ipv4.c:1721
sk_backlog_rcv include/net/sock.h:1113 [inline]
__release_sock+0x133/0x3b0 net/core/sock.c:2921
release_sock+0x58/0x1b0 net/core/sock.c:3488
tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1485
inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825
sock_sendmsg_nosec net/socket.c:722 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:745
sock_write_iter+0x295/0x3d0 net/socket.c:1136
call_write_iter include/linux/fs.h:2189 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9ed/0xdd0 fs/read_write.c:584
ksys_write+0x1ec/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at
ffff88806cdee800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of
1024-byte region [
ffff88806cdee800,
ffff88806cdeec00)
The buggy address belongs to the physical page:
page:
ffffea0001b37a00 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x6cde8
head:
ffffea0001b37a00 order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw:
00fff00000010200 ffff888012441dc0 dead000000000122 0000000000000000
raw:
0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1f2a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_MEMALLOC|__GFP_HARDWALL), pid 75, tgid 75 (kworker/u4:4), ts
96369578780, free_ts
26734162530
prep_new_page mm/page_alloc.c:2531 [inline]
get_page_from_freelist+0x119c/0x2ce0 mm/page_alloc.c:4283
__alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5549
alloc_pages+0x1aa/0x270 mm/mempolicy.c:2287
alloc_slab_page mm/slub.c:1851 [inline]
allocate_slab+0x25f/0x350 mm/slub.c:1998
new_slab mm/slub.c:2051 [inline]
___slab_alloc+0xa91/0x1400 mm/slub.c:3193
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3292
__slab_alloc_node mm/slub.c:3345 [inline]
slab_alloc_node mm/slub.c:3442 [inline]
__kmem_cache_alloc_node+0x1a4/0x430 mm/slub.c:3491
__do_kmalloc_node mm/slab_common.c:967 [inline]
__kmalloc_node_track_caller+0x4b/0xc0 mm/slab_common.c:988
kmalloc_reserve+0xf1/0x230 net/core/skbuff.c:539
__alloc_skb+0x129/0x330 net/core/skbuff.c:608
__netdev_alloc_skb+0x74/0x410 net/core/skbuff.c:672
__netdev_alloc_skb_ip_align include/linux/skbuff.h:3203 [inline]
netdev_alloc_skb_ip_align include/linux/skbuff.h:3213 [inline]
batadv_iv_ogm_aggregate_new+0x106/0x4e0 net/batman-adv/bat_iv_ogm.c:558
batadv_iv_ogm_queue_add net/batman-adv/bat_iv_ogm.c:670 [inline]
batadv_iv_ogm_schedule_buff+0xe6b/0x1450 net/batman-adv/bat_iv_ogm.c:849
batadv_iv_ogm_schedule net/batman-adv/bat_iv_ogm.c:868 [inline]
batadv_iv_ogm_schedule net/batman-adv/bat_iv_ogm.c:861 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x744/0x910 net/batman-adv/bat_iv_ogm.c:1712
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1446 [inline]
free_pcp_prepare+0x66a/0xc20 mm/page_alloc.c:1496
free_unref_page_prepare mm/page_alloc.c:3369 [inline]
free_unref_page+0x1d/0x490 mm/page_alloc.c:3464
free_contig_range+0xb5/0x180 mm/page_alloc.c:9488
destroy_args+0xa8/0x64c mm/debug_vm_pgtable.c:998
debug_vm_pgtable+0x28de/0x296f mm/debug_vm_pgtable.c:1318
do_one_initcall+0x141/0x790 init/main.c:1306
do_initcall_level init/main.c:1379 [inline]
do_initcalls init/main.c:1395 [inline]
do_basic_setup init/main.c:1414 [inline]
kernel_init_freeable+0x6f9/0x782 init/main.c:1634
kernel_init+0x1e/0x1d0 init/main.c:1522
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
Memory state around the buggy address:
ffff88806cdee700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88806cdee780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffff88806cdee800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff88806cdee880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes:
bf9f1baa279f ("net: add dedicated kmem_cache for typical/small skb->head")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 27 Feb 2023 18:12:01 +0000 (10:12 -0800)]
tls: rx: fix return value for async crypto
Gaurav reports that TLS Rx is broken with async crypto
accelerators. The commit under fixes missed updating
the retval byte counting logic when updating how records
are stored. Even tho both before and after the change
'decrypted' was updated inside the main loop, it was
completely overwritten when processing the async
completions. Now that the rx_list only holds
non-zero-copy records we need to add, not overwrite.
Reported-and-bisected-by: Gaurav Jain <gaurav.jain@nxp.com>
Fixes:
cbbdee9918a2 ("tls: rx: async: don't put async zc on the list")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217064
Tested-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227181201.1793772-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 28 Feb 2023 22:13:33 +0000 (14:13 -0800)]
Merge branch 'freescale-t1040rdb-dts-updates'
Vladimir Oltean says:
====================
Freescale T1040RDB DTS updates
This contains a fix for the new device tree for the T1040RDB rev A
board, which never worked, and an update to enable multiple CPU port
support for all revisions of the T1040RDB.
====================
Link: https://lore.kernel.org/r/20230224155941.514638-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 24 Feb 2023 15:59:40 +0000 (17:59 +0200)]
powerpc: dts: t1040rdb: enable both CPU ports
Since commit
eca70102cfb1 ("net: dsa: felix: add support for changing
DSA master") included in kernel v6.1, the driver supports 2 CPU ports,
and they can be put in a LAG, for example (see
Documentation/networking/dsa/configuration.rst for more details).
Defining the second CPU port in the device tree should not cause any
compatibility issue, because the default CPU port was &seville_port8
before this change, and still is &seville_port8 now (the numerically
first CPU port is used by default).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 24 Feb 2023 15:59:39 +0000 (17:59 +0200)]
powerpc: dts: t1040rdb: fix compatible string for Rev A boards
It looks like U-Boot fails to start the kernel properly when the
compatible string of the board isn't fsl,T1040RDB, so stop overriding it
from the rev-a.dts.
Fixes:
5ebb74749202 ("powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Mon, 27 Feb 2023 10:03:22 +0000 (13:03 +0300)]
net: phy: unlock on error in phy_probe()
If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock
the &phydev->lock mutex before returning.
Fixes:
3eeca4e199ce ("net: phy: do not force EEE support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/Y/x/6kHCjnQHqOpF@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kang Chen [Mon, 27 Feb 2023 09:30:37 +0000 (17:30 +0800)]
nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties
devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later.
Fixes:
a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Kang Chen <void0red@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rafał Miłecki [Mon, 27 Feb 2023 09:11:56 +0000 (10:11 +0100)]
bgmac: fix *initial* chip reset to support BCM5358
While bringing hardware up we should perform a full reset including the
switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what
specification says and what reference driver does.
This seems to be critical for the BCM5358. Without this hardware doesn't
get initialized properly and doesn't seem to transmit or receive any
packets.
Originally bgmac was calling bgmac_chip_reset() before setting
"has_robosw" property which resulted in expected behaviour. That has
changed as a side effect of adding platform device support which
regressed BCM5358 support.
Fixes:
f6a95a24957a ("net: ethernet: bgmac: Add platform device support")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227091156.19509-1-zajec5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Mon, 27 Feb 2023 22:05:08 +0000 (14:05 -0800)]
Merge tag 'net-6.3-rc1' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
Randy Dunlap [Mon, 27 Feb 2023 07:20:16 +0000 (23:20 -0800)]
riscv, bpf: Fix patch_text implicit declaration
bpf_jit_comp64.c uses patch_text(), so add <asm/patch.h> to it
to prevent the build error:
../arch/riscv/net/bpf_jit_comp64.c: In function 'bpf_arch_text_poke':
../arch/riscv/net/bpf_jit_comp64.c:691:23: error: implicit declaration of function 'patch_text'; did you mean 'path_get'? [-Werror=implicit-function-declaration]
691 | ret = patch_text(ip, new_insns, ninsns);
| ^~~~~~~~~~
Fixes:
596f2e6f9cf4 ("riscv, bpf: Add bpf_arch_text_poke support for RV64")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/202302271000.Aj4nMXbZ-lkp@intel.com
Link: https://lore.kernel.org/bpf/20230227072016.14618-1-rdunlap@infradead.org
Bagas Sanjaya [Wed, 22 Feb 2023 08:35:30 +0000 (15:35 +0700)]
bpf, docs: Fix link to BTF doc
Ross reported broken link to BTF documentation
(Documentation/bpf/btf.rst) in Documentation/bpf/bpf_devel_QA.rst. The
link in question is written using external link syntax, with the target
refers to BTF doc in reST source (btf.rst), which doesn't exist in
resulting HTML output.
Fix the link by replacing external link syntax with simply writing out
the target doc, which the link will be generated to the correct HTML doc
target.
Fixes:
6736aa793c2b5f ("selftests/bpf: Add general instructions for test execution")
Reported-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Ross Zwisler <zwisler@google.com>
Link: https://lore.kernel.org/linux-doc/Y++09LKx25dtR4Ow@google.com/
Link: https://lore.kernel.org/bpf/20230222083530.26136-1-bagasdotme@gmail.com
Eric Dumazet [Mon, 27 Feb 2023 08:33:36 +0000 (08:33 +0000)]
tcp: tcp_check_req() can be called from process context
This is a follow up of commit
0a375c822497 ("tcp: tcp_rtx_synack()
can be called from process context").
Frederick Lawler reported another "__this_cpu_add() in preemptible"
warning caused by the same reason.
In my former patch I took care of tcp_rtx_synack()
but forgot that tcp_check_req() also contained some SNMP updates.
Note that some parts of tcp_check_req() always run in BH context,
I added a comment to clarify this.
Fixes:
8336886f786f ("tcp: TCP Fast Open Server - support TFO listeners")
Link: https://lore.kernel.org/netdev/8cd33923-a21d-397c-e46b-2a068c287b03@cloudflare.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Frederick Lawler <fred@cloudflare.com>
Tested-by: Frederick Lawler <fred@cloudflare.com>
Link: https://lore.kernel.org/r/20230227083336.4153089-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Sat, 25 Feb 2023 07:16:44 +0000 (08:16 +0100)]
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
Without proper initialization, "changed" returned random numbers and caused
interface initialization failures.
Fixes:
022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230225071644.2754893-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Sun, 26 Feb 2023 16:34:29 +0000 (11:34 -0500)]
xen-netback: remove unused variables pending_idx and index
building with gcc and W=1 reports
drivers/net/xen-netback/netback.c:886:21: error: variable
‘pending_idx’ set but not used [-Werror=unused-but-set-variable]
886 | u16 pending_idx;
| ^~~~~~~~~~~
pending_idx is not used so remove it. Since index was only
used to set pending_idx, remove index as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 27 Feb 2023 18:36:36 +0000 (10:36 -0800)]
Merge tag 'wireless-2023-02-27' of git://git./linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
First set of fixes for v6.3. We have only three oneliners. The most
important one is the patch reducing warnings about the Wireless
Extensions usage, reported by Linus.
* tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
wifi: ath11k: allow system suspend to survive ath11k
====================
Link: https://lore.kernel.org/r/20230227131053.BD779C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 27 Feb 2023 18:09:40 +0000 (10:09 -0800)]
Merge tag 'arm-fixes-6.3-1' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
Linus Torvalds [Mon, 27 Feb 2023 18:04:49 +0000 (10:04 -0800)]
Merge tag 'soc-drivers-6.3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Linus Torvalds [Mon, 27 Feb 2023 17:53:58 +0000 (09:53 -0800)]
Merge tag 'fuse-update-6.3' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix regression in fileattr permission checking
- Fix possible hang during PID namespace destruction
- Add generic support for request extensions
- Add supplementary group list extension
- Add limited support for supplying supplementary groups in create
requests
- Documentation fixes
* tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add inode/permission checks to fileattr_get/fileattr_set
fuse: fix all W=1 kernel-doc warnings
fuse: in fuse_flush only wait if someone wants the return code
fuse: optional supplementary group in create requests
fuse: add request extension
Linus Torvalds [Mon, 27 Feb 2023 17:47:26 +0000 (09:47 -0800)]
Merge tag 'mmc-v6.3' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Extend slot-gpio to be used for host specific card detect interrupts
- Align to common busy polling behaviour for mmc ioctls
- Suggest the BFQ I/O scheduler to be built along with MMC/SD support
- Add devm_mmc_alloc_host() to enable further cleanups in host drivers
MMC host:
- atmel-mci: Fix race condition when stopping/starting a command
- dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
- dw_mmc-rockchip: Add support for the RK3588 variant
- jz4740: Add support for the vqmmc power supply
- meson-gx: Convert the DT bindings to the dt-schema
- meson-gx: Enable the platform interrupt to be used for card detect
- moxart: Set the supported maximum request/block/segment sizes
- renesas,sdhi: Add support for the RZ/V2M variants
- sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
- sdhci-esdhc-imx: Improve tuning logic support
- sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
- sdhci-of-dwcmshc: Add the missing device table IDs for acpi
- sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
- sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
- sdhci-pxav2: Add support for the PXA168 V1 variant
- sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
- uniphier-sd: Add support for SD UHS-I speed modes"
* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
mmc: meson-gx: constify member data of struct meson_host
mmc: meson-gx: use devm_clk_get_enabled() for core clock
mmc: core: fix return value check in devm_mmc_alloc_host()
dt-bindings: mmc: meson-gx: fix interrupt binding
mmc: meson-gx: support platform interrupt as card detect interrupt
dt-bindings: mmc: meson-gx: support specifying cd interrupt
mmc: core: support setting card detect interrupt from drivers
mmc: starfive: Add sdio/emmc driver support
dt-bindings: mmc: Add StarFive MMC module
dt-bindings: mmc: sdhci-msm: Allow 1 icc path
dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
mmc: core: Align to common busy polling behaviour for mmc ioctls
dt-bindings: mmc: Add resets property to cadence SDHCI binding
mmc: meson-gx: remove meson_mmc_get_cd
mmc: moxart: set maximum request/block/segment sizes
mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
mmc: jz4740: Add support for vqmmc power supply
...
Linus Torvalds [Mon, 27 Feb 2023 17:38:51 +0000 (09:38 -0800)]
Merge tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- remove a not very useful and now unused swiotlb API (Christoph
Hellwig)
- fix a section mismatch (Randy Dunlap)
* tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: mark swiotlb_memblock_alloc() as __init
swiotlb: remove swiotlb_max_segment
Linus Torvalds [Mon, 27 Feb 2023 17:34:53 +0000 (09:34 -0800)]
Merge tag 'memblock-v6.3-rc1' of git://git./linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Small optimizations:
- fix off-by-one in the check whether memblock_add_range() should
reallocate memory to accommodate newly inserted range
- check only for relevant regions in memblock_merge_regions() rather
than swipe over the entire array"
* tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Avoid useless checks in memblock_merge_regions().
memblock: Make a boundary tighter in memblock_add_range().
Linus Torvalds [Mon, 27 Feb 2023 17:31:02 +0000 (09:31 -0800)]
Merge tag 'm68knommu-for-v6.3' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- spelling fixes
* tag 'm68knommu-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: nommu: Fix misspellings of "DragonEngine"
m68k: nommu: Fix misspellings of "uCdimm"
Linus Torvalds [Mon, 27 Feb 2023 17:27:31 +0000 (09:27 -0800)]
Merge tag 'csky-for-linus-6.3' of https://github.com/c-sky/csky-linux
Pull csky update from Guo Ren:
- Optimize delay accuracy
* tag 'csky-for-linus-6.3' of https://github.com/c-sky/csky-linux:
csky: delay: Add function alignment
Arnd Bergmann [Mon, 27 Feb 2023 13:46:59 +0000 (14:46 +0100)]
Merge tag 'samsung-dt-fixes-6.3' of https://git./linux/kernel/git/krzk/linux into arm/fixes
Fixes for Samsung DTS ARM for v6.3
Thermal framework commit
3fd6d6e2b4e8 ("thermal/of: Rework the thermal
device tree initialization") merged in v6.1-rc1, exposed
misconfiguration of Exynos Thermal Monitoring Unit (TMU) thermal-sensors
property in DTS. This misconfiguration in DTS was working fine before
that Thermal commit, but now all thermal zones fail to register except
the first one (CPU). This can lead to missing cooling of a board and
eventually either emergency shutdown or damaged board.
* tag 'samsung-dt-fixes-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
Link: https://lore.kernel.org/r/20230221095337.9453-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Sat, 25 Feb 2023 16:22:37 +0000 (17:22 +0100)]
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
The compatible is st,stmpe-gpio.
Fixes:
e2eb69183ec4 ("ARM: SPEAr320: DT: Add SPEAr 320 HMI board support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230225162237.40242-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Eddie James [Tue, 21 Feb 2023 00:33:52 +0000 (11:03 +1030)]
ARM: dts: aspeed: p10bmc: Update battery node name
The ADC sensor for the battery needs to be named "iio-hwmon" for
compatibility with user space applications.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202152759.67069-1-eajames@linux.ibm.com
Fixes:
bf1914e2cfed ("ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230221003352.1218797-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Walleij [Fri, 24 Feb 2023 13:52:30 +0000 (14:52 +0100)]
arm64: defconfig: Add IOSCHED_BFQ to the default configs
ARM64 systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
ARM (32), Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in
their defconfigs, cf commit
b495dfed706c4c5873c0dab8930ad6eb1d276a6c
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230224135230.2295826-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mark Brown [Mon, 20 Feb 2023 19:09:45 +0000 (19:09 +0000)]
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
A recent update to support PCI endpoint mode on i.MX platforms
unintentionally disabled PCI host support for i.MX in defconfig. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to defconfig
so the PCI_IMX6 ends up getting disabled. Switch defconfig to
PCI_IMX6_HOST to preserve the existing functionality.
Fixes:
75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230220-imx-pci-defconfig-v1-1-2210cf08340e@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pedro Tammela [Fri, 24 Feb 2023 17:56:01 +0000 (14:56 -0300)]
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
TCA_EXT_WARN_MSG is currently sitting outside of the expected hierarchy
for the tc actions code. It should sit within TCA_ACT_TAB.
Fixes:
0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 26 Feb 2023 20:18:36 +0000 (12:18 -0800)]
Merge tag 'rproc-v6.3' of git://git./linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying
firmware-name in Devicetree. sysfs is requested to be read-only when
the remoteproc instance is consumed by another kernel driver
- Support for the C7xv DSP on AM62A SoC is introduced
- The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and
the Qualcomm WCNSS binding is converted to YAML
- A few cleanups are introduced for the Mediatek SCP driver. And a
sanity check of the firmware image is introduced in the Mediatek
driver
- For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
and support for pronto v3 support (used on e.g. MSM8953) is added
- The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process
- Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for
the modem is added as well
- The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is
transitioned to strlcpy()
* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
dt-bindings: remoteproc: qcom,glink-edge: correct label description
dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
remoteproc: qcom: pas: Add sm6115 remoteprocs
remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
remoteproc: qcom: fix sparse warnings
remoteproc: qcom: replace kstrdup with kstrndup
remoteproc: mediatek: Check the SCP image format
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
...
Linus Torvalds [Sun, 26 Feb 2023 20:10:28 +0000 (12:10 -0800)]
Merge tag 'rpmsg-v6.3' of git://git./linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- rpmsg ctrl and char driver locking is ensure ordering in cases where
the communication link is being torn down in parallel with calls to
open(2) or poll(2)
- The glink driver is refactored, to move rpm/smem-specifics out of the
common logic and better suite further improvements, such as
transports without a mailbox controller. The handling of remoteproc
shutdown is improved, to fail clients immediately instead of having
them to wait for timeouts. A driver_override memory leak is corrected
and a few spelling improvements are introduced
- glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid
child node of the glink-edge DT binding
* tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Release driver_override
rpmsg: glink: Avoid infinite loop on intent for missing channel
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: Fix spelling of peek
rpmsg: glink: Cancel pending intent requests at removal
rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
rpmsg: glink: Move irq and mbox handling to transports
rpmsg: glink: rpm: Wrap driver context
rpmsg: glink: smem: Wrap driver context
rpmsg: glink: Extract tx kick operation
rpmsg: glink: Include types in qcom_glink_native.h
rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove
rpmsg: char: Add lock to avoid race when rpmsg device is released
rpmsg: move from strlcpy with unused retval to strscpy
dt-bindings: remoteproc: qcom,glink-edge: add GPR node
Linus Torvalds [Sun, 26 Feb 2023 20:05:38 +0000 (12:05 -0800)]
Merge tag 'hwlock-v6.3' of git://git./linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"This updates the sun6i DT binding to allow (and require) #hwlock-cells
and makes use of device_match_of_node() to slight clean up the
condition in of_hwspin_lock_get_id()"
* tag 'hwlock-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: sun6i: Add #hwlock-cells to example
dt-bindings: hwlock: sun6i: Add missing #hwlock-cells
hwspinlock: Use device_match_of_node()
Linus Torvalds [Sun, 26 Feb 2023 19:53:25 +0000 (11:53 -0800)]
Merge tag 'kbuild-v6.3' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
Linus Torvalds [Sun, 26 Feb 2023 19:47:26 +0000 (11:47 -0800)]
Merge tag 'media/v6.3-1' of git://git./linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye,
stkwebcam, tm6000, vpfe_capture and zr364xx
- saa7146 recovered from staging/deprecated. We opted to give ti a
chance, and, instead of deprecating it, the intention is to write
patches migrating it from VB1 to VB2.
- av7110 returned from staging/deprecated/ to staging/ as we're not
planning on dropping it any time soon
- media controller API has gained experimental support for G_ROUTING
and streams API. No drivers use it right now. We're planning to add
one after -rc1, giving some time to experience the API and eventually
have changes during the next development cycle
- New sensor drivers: imx296, imx415, ov8858
- Atomisp had lots of changes, specially on its sensor's interface,
making atomisp sensor drivers closer to normal sensor drivers
- media controller kAPI has gained some helpers to traverse pipelines
- uvcvideo now better support power line control
- lots of bug fixes, cleanups and driver improvements
* tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits)
media: imx-mipi-csis: Check csis_fmt validity before use
media: v4l2-subdev.c: clear stream field
media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line
media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci"
media: Revert "media: av7110: move to staging/media/deprecated/saa7146"
media: imx-pxp: convert to regmap
media: imx-pxp: Use non-threaded IRQ
media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers
media: imx-pxp: Implement frame size enumeration
media: imx-pxp: Pass pixel format value to find_format()
media: imx-pxp: Add media controller support
media: imx-pxp: Don't set bus_info manually in .querycap()
media: imx-pxp: Sort headers alphabetically
media: imx-pxp: add support for i.MX7D
media: imx-pxp: make data_path_ctrl0 platform dependent
media: imx-pxp: disable LUT block
media: imx-pxp: explicitly disable unused blocks
media: imx-pxp: extract helper function to setup data path
media: imx-pxp: detect PXP version
media: dt-bindings: media: fsl-pxp: convert to yaml
...
Linus Torvalds [Sun, 26 Feb 2023 19:25:04 +0000 (11:25 -0800)]
Documentation: simplify and clarify DCO contribution example language
Long long ago, in a more innocent time, Greg wrote the clarification for
how the DCO should work and that you couldn't make anonymous
contributions, because the sign-off needed to be something we could
check back with.
It was 2006, and nobody reacted to the wording, the whole Facebook 'real
name' controversy was a decade in the future, and nobody even thought
about it. And despite the language, we've always accepted nicknames and
that language was never meant to be any kind of exclusionary wording.
In fact, even when it became a discussion in other adjacent projects,
apparently nobody even thought to just clarify the language in the
kernel docs, and instead we had projects like the CNCF that had long
discussions about it, and wrote their own clarifications [1] of it.
Just simplify the wording to the point where it shouldn't be causing
unnecessary angst and pain, or scare away people who go by preferred
naming.
Link: https://github.com/cncf/foundation/blob/659fd32c86dc/dco-guidelines.md
Fixes:
af45f32d25cc ("We can not allow anonymous contributions to the kernel")
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: Michael Dolan <mdolan@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King (Oracle) [Fri, 24 Feb 2023 16:44:20 +0000 (16:44 +0000)]
net: dsa: ocelot_ext: remove unnecessary phylink.h include
During review of ocelot_ext, it created a private phylink instance
that wasn't necessary. This was removed for subsequent postings,
but the include file seems to have been left behind. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 26 Feb 2023 18:31:37 +0000 (18:31 +0000)]
Merge branch 'net-ocelot-switch-regressions'
Vladimir Oltean says:
====================
Regressions in Ocelot switch drivers
These are 3 patches which resolve a regression in the Seville driver,
one in the Felix driver and a generic one which affects any kernel
compiled with 2 Kconfig options enabled. All of them have in common my
lack of attention during review/testing. The patches touch the DSA, MFD
and MDIO drivers for Ocelot. I think it would be preferable if all
patches went through netdev (with Lee's Ack).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 24 Feb 2023 15:52:35 +0000 (17:52 +0200)]
net: mscc: ocelot: fix duplicate driver name error
When compiling a kernel which has both CONFIG_NET_DSA_MSCC_OCELOT_EXT
and CONFIG_MSCC_OCELOT_SWITCH enabled, the following error message will
be printed:
[ 5.266588] Error: Driver 'ocelot-switch' is already registered, aborting...
Rename the ocelot_ext.c driver to "ocelot-ext-switch" to avoid the name
duplication, and update the mfd_cell entry for its resources.
Fixes:
3d7316ac81ac ("net: dsa: ocelot: add external ocelot switch control")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 24 Feb 2023 15:52:34 +0000 (17:52 +0200)]
net: dsa: felix: fix internal MDIO controller resource length
The blamed commit did not properly convert the resource start/end format
into the DEFINE_RES_MEM_NAMED() start/length format, resulting in a
resource for vsc9959_imdio_res which is much longer than expected:
$ cat /proc/iomem
1f8000000-
1f815ffff : pcie@
1f0000000
1f8140000-
1f815ffff : 0000:00:00.5
1f8148030-
1f815006f : imdio
vs (correct)
$ cat /proc/iomem
1f8000000-
1f815ffff : pcie@
1f0000000
1f8140000-
1f815ffff : 0000:00:00.5
1f8148030-
1f814803f : imdio
Luckily it's not big enough to exceed the size of the parent resource
(pci_resource_end(pdev, VSC9959_IMDIO_PCI_BAR)), and it doesn't overlap
with anything else that the Linux driver uses currently, so the larger
than expected size isn't a practical problem that I can see. Although it
is clearly wrong in the /proc/iomem output.
Fixes:
044d447a801f ("net: dsa: felix: use DEFINE_RES_MEM_NAMED for resources")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 24 Feb 2023 15:52:33 +0000 (17:52 +0200)]
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
During the refactoring in the commit below, vsc9953_mdio_read() was
replaced with mscc_miim_read(), which has one extra step: it checks for
the MSCC_MIIM_DATA_ERROR bits before returning the result.
On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they
are organized in 2 groups. First group responds to MDIO addresses 4-7
because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to
MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double
checked that these values are correctly set in the SERDES, as well as
PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01.
mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d
mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801
mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR
mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR
mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR
mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR
As can be seen, the data in MIIM_DATA is still valid despite having the
MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit
84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953
switch") was ignoring these bits, perhaps deliberately (although
unbeknownst to me).
This is an old IP and the hardware team cannot seem to be able to help
me track down a plausible reason for these failures. I'll keep
investigating, but in the meantime, this is a direct regression which
must be restored to a working state.
The only thing I can do is keep ignoring the errors as before.
Fixes:
b99658452355 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 26 Feb 2023 18:27:46 +0000 (18:27 +0000)]
Merge branch 'net-sched-action-bind'
Pedro Tammela says:
====================
net/sched: fix action bind logic
Some actions are not handling the case where an action can be created and bound to a
filter independently. These actions are checking for parameters only passed
in the netlink message for create/change/replace, which then errors out
for valid uses like:
tc filter ... action pedit index 1
In the iproute2 side, we saw a couple of actions with their parsers
broken when passing "index 1" as the only action argument, while the kernel
side accepted it correctly. We fixed those as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pedro Tammela [Fri, 24 Feb 2023 15:00:58 +0000 (12:00 -0300)]
net/sched: act_sample: fix action bind logic
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action sample ... index 1
tc filter add ... action pedit index 1
In the current code for act_sample this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action
ok 3 334b - Add valid sample action with mandatory arguments and drop control action
ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index
Fixes:
5c5670fae430 ("net/sched: Introduce sample tc action")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pedro Tammela [Fri, 24 Feb 2023 15:00:57 +0000 (12:00 -0300)]
net/sched: act_mpls: fix action bind logic
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action mpls ... index 1
tc filter add ... action mpls index 1
In the current code for act_mpls this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..53
ok 1 a933 - Add MPLS dec_ttl action with pipe opcode
ok 2 08d1 - Add mpls dec_ttl action with pass opcode
ok 3 d786 - Add mpls dec_ttl action with drop opcode
ok 4 f334 - Add mpls dec_ttl action with reclassify opcode
ok 5 29bd - Add mpls dec_ttl action with continue opcode
ok 6 48df - Add mpls dec_ttl action with jump opcode
ok 7 62eb - Add mpls dec_ttl action with trap opcode
ok 8 09d2 - Add mpls dec_ttl action with opcode and cookie
ok 9 c170 - Add mpls dec_ttl action with opcode and cookie of max length
ok 10 9118 - Add mpls dec_ttl action with invalid opcode
ok 11 6ce1 - Add mpls dec_ttl action with label (invalid)
ok 12 352f - Add mpls dec_ttl action with tc (invalid)
ok 13 fa1c - Add mpls dec_ttl action with ttl (invalid)
ok 14 6b79 - Add mpls dec_ttl action with bos (invalid)
ok 15 d4c4 - Add mpls pop action with ip proto
ok 16 91fb - Add mpls pop action with ip proto and cookie
ok 17 92fe - Add mpls pop action with mpls proto
ok 18 7e23 - Add mpls pop action with no protocol (invalid)
ok 19 6182 - Add mpls pop action with label (invalid)
ok 20 6475 - Add mpls pop action with tc (invalid)
ok 21 067b - Add mpls pop action with ttl (invalid)
ok 22 7316 - Add mpls pop action with bos (invalid)
ok 23 38cc - Add mpls push action with label
ok 24 c281 - Add mpls push action with mpls_mc protocol
ok 25 5db4 - Add mpls push action with label, tc and ttl
ok 26 7c34 - Add mpls push action with label, tc ttl and cookie of max length
ok 27 16eb - Add mpls push action with label and bos
ok 28 d69d - Add mpls push action with no label (invalid)
ok 29 e8e4 - Add mpls push action with ipv4 protocol (invalid)
ok 30 ecd0 - Add mpls push action with out of range label (invalid)
ok 31 d303 - Add mpls push action with out of range tc (invalid)
ok 32 fd6e - Add mpls push action with ttl of 0 (invalid)
ok 33 19e9 - Add mpls mod action with mpls label
ok 34 1fde - Add mpls mod action with max mpls label
ok 35 0c50 - Add mpls mod action with mpls label exceeding max (invalid)
ok 36 10b6 - Add mpls mod action with mpls label of MPLS_LABEL_IMPLNULL (invalid)
ok 37 57c9 - Add mpls mod action with mpls min tc
ok 38 6872 - Add mpls mod action with mpls max tc
ok 39 a70a - Add mpls mod action with mpls tc exceeding max (invalid)
ok 40 6ed5 - Add mpls mod action with mpls ttl
ok 41 77c1 - Add mpls mod action with mpls ttl and cookie
ok 42 b80f - Add mpls mod action with mpls max ttl
ok 43 8864 - Add mpls mod action with mpls min ttl
ok 44 6c06 - Add mpls mod action with mpls ttl of 0 (invalid)
ok 45 b5d8 - Add mpls mod action with mpls ttl exceeding max (invalid)
ok 46 451f - Add mpls mod action with mpls max bos
ok 47 a1ed - Add mpls mod action with mpls min bos
ok 48 3dcf - Add mpls mod action with mpls bos exceeding max (invalid)
ok 49 db7c - Add mpls mod action with protocol (invalid)
ok 50 b070 - Replace existing mpls push action with new ID
ok 51 95a9 - Replace existing mpls push action with new label, tc, ttl and cookie
ok 52 6cce - Delete mpls pop action
ok 53 d138 - Flush mpls actions
Fixes:
2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pedro Tammela [Fri, 24 Feb 2023 15:00:56 +0000 (12:00 -0300)]
net/sched: act_pedit: fix action bind logic
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action pedit ... index 1
tc filter add ... action pedit index 1
In the current code for act_pedit this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..69
ok 1 319a - Add pedit action that mangles IP TTL
ok 2 7e67 - Replace pedit action with invalid goto chain
ok 3 377e - Add pedit action with RAW_OP offset u32
ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16
ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID)
ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value
ok 8 2893 - Add pedit action with RAW_OP offset u8 quad
ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8
ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value
ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value
ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value
ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value
ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value
ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value
ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value
ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value
ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value
ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value
ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value
ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src
ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst
ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst
ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID)
ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID)
ok 32 ab06 - Add pedit action with LAYERED_OP eth add type
ok 33 918d - Add pedit action with LAYERED_OP eth invert src
ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst
ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type
ok 36 7588 - Add pedit action with LAYERED_OP ip set src
ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst
ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst
ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set
ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields
ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields
ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos
ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence
ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos
ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence
ok 49 438e - Add pedit action with LAYERED_OP ip clear tos
ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence
ok 51 824a - Add pedit action with LAYERED_OP ip invert tos
ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence
ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code
ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
ok 56 815c - Add pedit action with LAYERED_OP ip6 set src
ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst
ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class
ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit
ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport
ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set
ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields
ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1
ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2
Fixes:
71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers")
Fixes:
f67169fef8db ("net/sched: act_pedit: fix WARN() in the traffic path")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 24 Feb 2023 12:59:34 +0000 (13:59 +0100)]
wifi: wext: warn about usage only once
Warn only once since the ratelimit parameters are still
allowing too many messages to happen. This will no longer
tell you all the different processes, but still gives a
heads-up of sorts.
Also modify the message to note that wext stops working
for future Wi-Fi 7 hardware, this is already implemented
in commit
4ca69027691a ("wifi: wireless: deny wireless
extensions on MLO-capable devices") and is maybe of more
relevance to users than the fact that we'd like to have
wireless extensions deprecated.
The issue with Wi-Fi 7 is that you can now have multiple
connections to the same AP, so a whole bunch of things
now become per link rather than per netdev, which can't
really be handled in wireless extensions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230224135933.94104aeda1a0.Ie771c6a66d7d6c3cf67da5f3b0c66cea66fd514c@changeid
Lorenzo Bianconi [Thu, 23 Feb 2023 23:02:17 +0000 (00:02 +0100)]
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
Fix the following use-after-free issue in mt76u_free_rx_queue routine:
usb 3-3.3.4: reset high-speed USB device number 8 using xhci_hcd
iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100
iwlwifi 0000:05:00.0: base HW address: 50:eb:71:79:02:57
iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
mt76x2u 3-3.3.4:1.0: ASIC revision:
76320044
usb 3-3.3.1: 1:3 : unsupported format bits 0x100000000
mt76x2u 3-3.3.4:1.0: could not get hardware semaphore for ROM PATCH
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 13 PID: 983 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
Modules linked in: snd_seq_midi snd_seq_midi_event mt76x2u(+)
mt76x2_common mt76x02_usb mt76_usb iwlmvm mt76x02_lib mt76
snd_hda_codec_realtek intel_rapl_msr snd_hda_codec_generic
snd_hda_codec_hdmi intel_rapl_common snd_hda_intel mac80211
snd_intel_dspcfg snd_usb_audio(+) snd_intel_sdw_acpi btusb
edac_mce_amd snd_hda_codec btrtl btbcm snd_usbmidi_lib snd_hda_core
btintel snd_rawmidi btmtk snd_hwdep libarc4 mc iwlwifi kvm_amd snd_seq
vfat bluetooth eeepc_wmi asus_ec_sensors snd_seq_device fat kvm
cfg80211 asus_wmi snd_pcm irqbypass ledtrig_audio sparse_keymap rapl
wmi_bmof platform_profile xpad snd_timer k10temp ff_memless i2c_piix4
rfkill snd joydev soundcore acpi_cpufreq loop zram amdgpu
crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni
polyval_generic drm_ttm_helper ttm video iommu_v2 ucsi_ccg drm_buddy
gpu_sched typec_ucsi ghash_clmulni_intel drm_display_helper igb
sha512_ssse3 typec ccp nvme cec sp5100_tco nvme_core dca nvme_common
wmi ip6_tables ip_tables fuse
BTRFS info (device nvme1n1): enabling ssd optimizations
CPU: 13 PID: 983 Comm: (udev-worker) Tainted: G W L
------- --- 6.3.0-0.rc0.20230222git5b7c4cabbb65.3.fc39.x86_64+debug
BTRFS info (device nvme1n1): auto enabling async discard
Hardware name: System manufacturer System Product Name/ROG STRIX
X570-I GAMING, BIOS 4601 02/02/2023
RIP: 0010:refcount_warn_saturate+0xba/0x110
Code: 01 01 e8 69 a6 83 ff 0f 0b e9 52 f4 85 00 80 3d 69 6f ec 01 00
75 85 48 c7 c7 d0 25 b3 a9 c6 05 59 6f ec 01 01 e8 46 a6 83 ff <0f> 0b
e9 2f f4 85 00 80 3d 47 6f ec 01 00 0f 85 5e ff ff ff 48 c7
RSP: 0018:
ffffb4010456fb78 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
0000000080000000 RCX:
0000000000000000
RDX:
0000000000000002 RSI:
ffffffffa9b17e3e RDI:
00000000ffffffff
RBP:
ffff8d15877336c0 R08:
0000000000000000 R09:
ffffb4010456fa00
R10:
0000000000000003 R11:
ffff8d246e2fffe8 R12:
0000000000000080
R13:
ffff8d15b42fd000 R14:
0000000000000000 R15:
ffff8d1587736a58
FS:
00007fc05ae34940(0000) GS:
ffff8d2425e00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055d801f1d540 CR3:
000000011df60000 CR4:
0000000000350ee0
Call Trace:
<TASK>
mt76u_queues_deinit+0x2a0/0x370 [mt76_usb]
mt76x2u_probe+0xf3/0x130 [mt76x2u]
usb_probe_interface+0xe8/0x300
really_probe+0x1b6/0x410
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xd2/0x1c0
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x8a/0xd0
bus_add_driver+0x141/0x230
driver_register+0x77/0x120
usb_register_driver+0xaf/0x170
? __pfx_init_module+0x10/0x10 [mt76x2u]
do_one_initcall+0x6e/0x350
do_init_module+0x4a/0x220
__do_sys_init_module+0x192/0x1c0
? lock_is_held_type+0xce/0x120
do_syscall_64+0x5b/0x80
? lock_is_held_type+0xce/0x120
? asm_exc_page_fault+0x22/0x30
? lockdep_hardirqs_on+0x7d/0x100
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fc05b1351be
Code: 48 8b 0d 4d 0c 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f
84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 8b 0d 1a 0c 0c 00 f7 d8 64 89 01 48
RSP: 002b:
00007ffd947c0988 EFLAGS:
00000246 ORIG_RAX:
00000000000000af
RAX:
ffffffffffffffda RBX:
000055d801f2b090 RCX:
00007fc05b1351be
RDX:
00007fc05b65c07d RSI:
00000000000234be RDI:
000055d802c6b170
RBP:
00007ffd947c0a40 R08:
000055d8019b4690 R09:
0000000000022000
R10:
000000055d8019b4 R11:
0000000000000246 R12:
00007fc05b65c07d
R13:
0000000000020000 R14:
000055d801f39770 R15:
000055d801f47780
</TASK>
irq event stamp: 186313
hardirqs last enabled at (186323): [<
ffffffffa81c675e>]
__up_console_sem+0x5e/0x70
hardirqs last disabled at (186332): [<
ffffffffa81c6743>]
__up_console_sem+0x43/0x70
softirqs last enabled at (186022): [<
ffffffffa811d2f7>]
__irq_exit_rcu+0xd7/0x160
softirqs last disabled at (186017): [<
ffffffffa811d2f7>]
__irq_exit_rcu+0xd7/0x160
---[ end trace
0000000000000000 ]---
mt76x2u: probe of 3-3.3.4:1.0 failed with error -110
usbcore: registered new interface driver mt76x2u
kauditd_printk_skb: 32 callbacks suppressed
Fixes:
2f5c3c77fc9b ("wifi: mt76: switch to page_pool allocator")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/f2398f68011c976510c81e1964975b677e65860e.1677193208.git.lorenzo@kernel.org
Michal Schmidt [Fri, 24 Feb 2023 00:41:45 +0000 (01:41 +0100)]
qede: avoid uninitialized entries in coal_entry array
Even after commit
908d4bb7c54c ("qede: fix interrupt coalescing
configuration"), some entries of the coal_entry array may theoretically
be used uninitialized:
1. qede_alloc_fp_array() allocates QEDE_MAX_RSS_CNT entries for
coal_entry. The initial allocation uses kcalloc, so everything is
initialized.
2. The user sets a small number of queues (ethtool -L).
coal_entry is reallocated for the actual small number of queues.
3. The user sets a bigger number of queues.
coal_entry is reallocated bigger. The added entries are not
necessarily initialized.
In practice, the reallocations will actually keep using the originally
allocated region of memory, but we should not rely on it.
The reallocation is unnecessary. coal_entry can always have
QEDE_MAX_RSS_CNT entries.
Fixes:
908d4bb7c54c ("qede: fix interrupt coalescing configuration")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Nacked-by: Manish Chopra <manishc@marvell.com>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>