Simon Glass [Thu, 1 Aug 2019 15:46:50 +0000 (09:46 -0600)]
env: Move env_get_hex() to env.h
Move env_get_hex() over to the new header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:49 +0000 (09:46 -0600)]
env: Move env_get_yesno() to env.h
Move env_get_yesno() over to the new header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:48 +0000 (09:46 -0600)]
env: Move env_get_ulong() to env.h
Move env_get_ulong() over to the new header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:47 +0000 (09:46 -0600)]
env: Move env_set_ulong() to env.h
Move env_set_ulong() over to the new header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:46 +0000 (09:46 -0600)]
env: Move env_set_hex() to env.h
Move env_set_hex() over to the new header file along with env_set_addr()
which uses it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:45 +0000 (09:46 -0600)]
env: Move envmatch() to env.h
Move envmatch() over to the new header file. Also rename it to env_match()
to better line up with other functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:44 +0000 (09:46 -0600)]
env: Move env_relocate() to env.h
Move env_relocate() over to the new header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:43 +0000 (09:46 -0600)]
env: Move env_init() to env.h
Move env_init() over to the new header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:42 +0000 (09:46 -0600)]
env: Move env_get_f() to env.h
Move this function over to the new header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:41 +0000 (09:46 -0600)]
env: Move get_env_id() to env.h
Move this function over to the new header file. Also rename it to have an
env_ prefix like the other functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Simon Glass [Thu, 1 Aug 2019 15:46:40 +0000 (09:46 -0600)]
env: Create a new file for environment functions
At present we have environment.h but this file includes all the
environment-related header files as well as internals such as
default_environment.
It seems desirable to have a new header to hold the commonly used
environment functions, so that most files can avoid including all of this
unnecessary stuff.
Create a new env.h header and move one function over to it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Simon Glass [Thu, 1 Aug 2019 15:46:39 +0000 (09:46 -0600)]
common: Remove video_setmem()
This function is no-longer defined in U-Boot. Drop the declaration from
common.h
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 1 Aug 2019 15:46:38 +0000 (09:46 -0600)]
common: Move lcd_setmem() to lcd.h
This function relates to lcd.h and is about to become obsolete with the
driver-model conversion. Move it out of common.h
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 1 Aug 2019 15:46:37 +0000 (09:46 -0600)]
common: Drop the dpram_... functions
These declarations are not used anymore, so drop them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Simon Glass [Thu, 1 Aug 2019 15:46:36 +0000 (09:46 -0600)]
common: Move gzip functions into a new gzip header
As part of the effort to remove things from common.h, create a new header
for the gzip functions. Move the function declarations to it and add
missing documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Igor Opaniuk [Thu, 8 Aug 2019 12:33:09 +0000 (15:33 +0300)]
MAINTAINERS: Add entries for Android A/B and AVB
1. Add myself as Android A/B and AVB maintainer
2. Add Sam Protsenko as Designated reviewer for A/B
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Manivannan Sadhasivam [Fri, 2 Aug 2019 15:10:11 +0000 (20:40 +0530)]
MAINTAINERS: Add entry for HI3660 SoC
Add MAINTAINERS entry for HI3660 SoC by adding the arch includes.
While doing so, adding myself as the co-maintainer for HISILICON
SoCs since I'm planning to maintain HI3660 SoC separately and considering
doing improvements to the existing HiSilicon SoC architecture.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Manivannan Sadhasivam [Fri, 2 Aug 2019 15:10:10 +0000 (20:40 +0530)]
mmc: Add support for HI3660 SoC reusing hi6220_dw_mmc driver
This commit adds MMC driver support for HI3660 SoC reusing hi6220_dw_mmc
driver. Since HI3660 operates at different clock rate and uses fifo
mode now, let's introduce the platform data and utilize it for different
SoCs supported by this driver.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Manivannan Sadhasivam [Fri, 2 Aug 2019 15:10:09 +0000 (20:40 +0530)]
board: hisilicon: Add support for Hikey960 board
This commit adds board support for Hikey960 board from Hisilicon. This
board is one of the Consumer Edition boards of the 96Boards family
powered by Kirin960 SoC.
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/hikey960/
The initial supported/tested devices include:
- Debug serial
- SD
With these support, it's good enough for loading Linux Kernel from SD.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Manivannan Sadhasivam [Fri, 2 Aug 2019 15:10:08 +0000 (20:40 +0530)]
arm: dts: Add devicetree for Hikey960 board
This commit adds devicetree for Hikey960 board. Most of the contents are
copied from Linux kernel with some modifications for u-boot. To be
more precise, SD card's speed related properties are removed due to a
bug in u-boot clock implementation. Hence forcing the SD controller to
work in standard speed.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Manivannan Sadhasivam [Fri, 2 Aug 2019 15:10:07 +0000 (20:40 +0530)]
arm: dts: Import HI3660 devicetree from Linux
This commit imports HI3660 SoC devicetree from Linux
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Simon Goldschmidt [Tue, 16 Jul 2019 20:30:36 +0000 (22:30 +0200)]
spl: implement stack usage check
This implements a stack usage check in SPL.
Many boards start up SPL to run code + data from one common, rather small
SRAM. To implement a sophisticated SPL binary size limit on such boards,
the stack size (as well as malloc size and global data size) must be
subtracted from this SRAM size.
However, to do that properly, the stack size first needs to be known.
This patch adds a new Kconfig option:
- SPL_SYS_REPORT_STACK_F_USAGE: memset(0xaa) the whole area of the stack
very early and check stack usage based on this constant later before the
stack is switched to DRAM
Initializing the stack and checking it is implemented in weak functions,
in case a board does not use the stack as saved in gd->start_addr_sp.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Ye Li [Thu, 11 Jul 2019 03:33:34 +0000 (03:33 +0000)]
serial_lpuart: Fix config check issue when using clk driver in SPL
Should use CONFIG_IS_ENABLED not IS_ENABLED for CLK driver, so it will
check the CONFIG_SPL_CLK when building SPL
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Ley Foon Tan [Fri, 24 May 2019 02:30:00 +0000 (10:30 +0800)]
pci: intel: Fix configuration type based on secondary number
This fix issue when access config from PCIe switch.
The PCIe controller need to send Type 0 config TLP if the targeting bus
matches with the secondary bus number, which is when the TLP is targeting
the immediate device on the link.
The PCIe controller send Type 1 config TLP if the targeting bus is
larger than the secondary bus, which is when the TLP is targeting the
device not immediate on the link.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 24 May 2019 02:29:59 +0000 (10:29 +0800)]
pci: intel: Fix error when enumerating multi-function PCIe device
Hardware return completion status non-zero when read from non exist
function in multi-function PCIe device. Return error will cause PCIe
enumeration fail.
Change it to return 0 and return value 0xffffffff when error.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 24 May 2019 02:29:58 +0000 (10:29 +0800)]
pci: intel: Increase TLP polling counter
Some PCIe devices require longer time to response.
Increase polling counter to 20000 (~100ms).
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Tom Rini [Sat, 10 Aug 2019 21:57:58 +0000 (17:57 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
- R8A77980 V3H support
Tom Rini [Sat, 10 Aug 2019 16:21:27 +0000 (12:21 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
- DaVinci USB updates
- Various OHCI fixes
- Gadget fixes
Tom Rini [Sat, 10 Aug 2019 03:27:15 +0000 (23:27 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Enable SD slot on Intel Edison
- Populate CSRT ACPI table for shared DMA controller on Intel Tangier
- Convert Intel ICH-SPI driver to use new spi-mem ops
- Enable config_distro_bootcmd for QEMU x86
- Support U-Boot as a payload for Intel Slim Bootloader
- Avoid writing temporary asl files into the source tree which fixes the
parallel build issue occasionally seen
Marek Vasut [Mon, 29 Jul 2019 17:59:44 +0000 (19:59 +0200)]
ARM: renesas: Add R8A77980 V3H Condor board code
Add board code for the R8A77980 V3H Condor board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 29 Jul 2019 17:59:44 +0000 (19:59 +0200)]
ARM: renesas: Add R8A77980 V3H platform code
Add a few bits of platform code to support R8A77980 V3H SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 29 Jul 2019 17:59:44 +0000 (19:59 +0200)]
ARM: dts: renesas: Add R8A77980 V3H DTs and headers
Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit
5697a9d3d55f.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 29 Jul 2019 17:59:44 +0000 (19:59 +0200)]
clk: renesas: Add R8A77980 V3H clock tables
Import R8A77980 V3H clock tables from Linux 5.2.7 , commit
5697a9d3d55f.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 29 Jul 2019 17:59:44 +0000 (19:59 +0200)]
pinctrl: renesas: Add R8A77980 V3H PFC tables
Import R8A77980 V3H PFC tables from Linux 5.2.7 , commit
5697a9d3d55f.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 31 Jul 2019 12:48:17 +0000 (14:48 +0200)]
net: sh_eth: Fix 64bit build warnings
Fix various type warnings when building this driver for 64bit machine.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 31 Jul 2019 10:58:06 +0000 (12:58 +0200)]
net: sh_eth: Add R8A77980 V3H gether support
The R8A77980 V3H gether needs a few minor adjustments to the sh_eth
driver, add them to support ethernet on R8A77980.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tom Rini [Fri, 9 Aug 2019 17:21:53 +0000 (13:21 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-tegra
Igor Opaniuk [Tue, 25 Jun 2019 14:06:41 +0000 (17:06 +0300)]
apalis-tk1: configs: remove legacy usbboot command
Remove obsolete legacy usbboot wrapper, as distroboot can handle
booting from USB drivers.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Fri, 9 Aug 2019 10:21:46 +0000 (13:21 +0300)]
apalis-tk1: support v1.2 hardware revision
Support the V1.2 hardware revision with the following pin muxing
changes:
Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.
Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable signals.
Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power
enable signals are now used as GPIO3 and GPIO4.
Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is
loaded on V1.2 and later modules and resp. USB power enable signals
activated.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Dominik Sliwa [Thu, 1 Aug 2019 08:06:39 +0000 (11:06 +0300)]
apalis-tk1: remove non-essential power rails on boot
When mainline kernels reboot TK1 they use SW_RESET,
that reset mode does not reset PMIC. Some rails
need to be off for RAM Re-repair to work correctly.
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Thu, 1 Aug 2019 08:06:38 +0000 (11:06 +0300)]
apalis-tk1: remove default vesa vga mode from vidargs
Remove video=tegrafb0:640x480-16@60 aka VESA VGA mode from vidargs in
order for the panel specification in the device tree to be used. This
causes the default to be the 10.1" LVDS display which will be available
in the Toradex webshop shortly.
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Dominik Sliwa [Thu, 1 Aug 2019 08:06:37 +0000 (11:06 +0300)]
apalis-tk1/t30: colibri_t30: display reset reason
Display proper reset reason after the SoC info.
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Igor Opaniuk [Thu, 1 Aug 2019 08:06:36 +0000 (11:06 +0300)]
apalis-tk1: switch to zImage
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Igor Opaniuk [Thu, 1 Aug 2019 08:06:35 +0000 (11:06 +0300)]
apalis-tk1: add pcie_aspm=off to defargs
Disabling ASPM fixes incompatibilities with some PCIe cards
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Igor Opaniuk [Thu, 1 Aug 2019 08:06:34 +0000 (11:06 +0300)]
apalis-tk1: enable user debug by default
Let the kernel print some debug messages when a user program
crashes due to an exception.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Igor Opaniuk [Thu, 1 Aug 2019 08:06:33 +0000 (11:06 +0300)]
apalis-tk1: provide proper USB vendor id
Use unified values for USB Product/Vendor numbers
when the config block is missing
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Igor Opaniuk [Thu, 1 Aug 2019 08:06:32 +0000 (11:06 +0300)]
apalis-tk1: set apalis gpio 8 aka fan_en
Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1
modules.
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Marcel Ziswiler [Thu, 1 Aug 2019 08:06:31 +0000 (11:06 +0300)]
apalis-tk1: do not explicitly release reset_moci#
By keeping RESET_MOCI_CTRL low we avoid explicitly releasing
RESET_MOCI#.
Please note that module hardware versions up to V1.1A will already
release RESET_MOCI# in hardware coming out of reset.
Please further note that with this change the USB hub on the Apalis
Evaluation board is kept in reset in U-Boot and therefore none of its
ports are operational in U-Boot.
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Igor Opaniuk [Fri, 14 Jun 2019 07:59:10 +0000 (10:59 +0300)]
colibri/apalis tegra: drop DFU support
We never really added a sensible DFU configuration for platforms
based on eMMC. Most of the things one might want to do can also be done
with UMS or fastboot, so drop the DFU configuration.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Trent Piepho [Mon, 1 Apr 2019 23:05:49 +0000 (23:05 +0000)]
mmc: Move tegra loopback disable option to be under tegra
This is a configuration option specific to the tegra controller.
Doing it this way makes it show up directly under the tegra controller
option, indented one level, as "Disable external clock loopback".
The way it is now, it shows up at the end of the controller list, not
indented, as if it's some kind of generic MMC configuration option.
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 24 Apr 2019 03:56:25 +0000 (21:56 -0600)]
sound: Add codec enable to the sound bindings
For U-Boot we allow a GPIO to be specified to enable the codec. Add this
to the relevant binding files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 24 Apr 2019 03:56:24 +0000 (21:56 -0600)]
sound: tegra: Add the binding file for tegra-audio
This file was missed when adding the sound driver to U-Boot. Bring it in
from Linux 5.0.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Wed, 24 Apr 2019 03:56:23 +0000 (21:56 -0600)]
sound: snow: Add the binding file for snow
This file was missed when adding the sound driver to U-Boot. Bring it in
from Linux 5.0.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Park, Aiden [Sat, 3 Aug 2019 08:31:20 +0000 (08:31 +0000)]
x86: Skip setting up MTRRs in slimbootloader
The setting up MTRRs have already been done in previous
Slim Bootloader stages.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:31:11 +0000 (08:31 +0000)]
board: intel: Add new slimbootloader board
Add slimbootloader board to run U-boot as a Slim Bootloader payload
- Add new board/intel/slimbootloader directory with minimum codes
- Add slimbootloader configuration files
- Add doc/board/intel/slimbootloader.rst
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: add slimbootloader board MAINTAINERS file]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:31:00 +0000 (08:31 +0000)]
x86: slimbootloader: Add a slimbootloader device tree
Add a new device tree which has very minimum nodes
- x86 reset
- x86 tsc_timer
- x86 pci
- Slim Bootloader serial
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:30:52 +0000 (08:30 +0000)]
x86: slimbootloader: Set TSC information for tsc_timer
Slim Bootloader already calibrated TSC and provides it to U-Boot.
Therefore, U-Boot does not have to re-calibrate TSC.
Configuring tsc_base and clock_rate makes x86 tsc_timer driver bypass
TSC calibration and use the provided TSC frequency.
- Get TSC frequency from performance info hob
- Set tsc_base and clock_rate for tsc_timer driver
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:30:44 +0000 (08:30 +0000)]
x86: slimbootloader: Add serial driver
Slim Bootloader provides serial port info thru its HOB list pointer.
All these HOBs are eligible for Slim Bootloader based board only.
- Get serial port information from the serial port info HOB
- Leverage ns16550 driver with slimbootloader specific platform data
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:30:36 +0000 (08:30 +0000)]
x86: slimbootloader: Add memory configuration
Slim Bootloader provides memory map info thru its HOB list pointer.
Configure memory size and relocation memory from the HOB data, and
provide e820 entries as well.
- Get memory size from the memory map info HOB
- Set available top memory lower than 4GB for U-Boot relocation
- Provide e820 entries from the memory map info HOB
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:30:31 +0000 (08:30 +0000)]
x86: Add a common HOB library
FSP (CONFIG_HAVE_FSP) and Slim Bootloader (CONFIG_SYS_SLIMBOOTLOADER)
consume HOB (CONFIG_USE_HOB) data from the each HOB list pointer.
Add a common HOB library in lib/hob.c and include/asm/hob.h.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:30:20 +0000 (08:30 +0000)]
x86: lib: fsp: Use EFI_GUID and efi_guid_t
Use existing EFI_GUID and efi_guid_t instead of struct efi_guid.
This is pre-work before making a common HOB library.
- Change 'struct efi_guid' to efi_guit_t
- Remove 'struct efi_guid'
- Define GUIDs with EFI_GUID() macro
- Use guidcmp() instead of compare_guid()
- Remove compare_guid()
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested on MinnowMax
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Park, Aiden [Sat, 3 Aug 2019 08:30:12 +0000 (08:30 +0000)]
x86: Add new slimbootloader CPU type
This slimbootloader CPU type is to enable U-Boot as a payload which
runs on top of Slim Bootloader (https://github.com/slimbootloader).
The Slim Bootloader is designed with multi-stage architecture for
the execution from reset vector to OS booting, and supports QEMU,
Apollolake, Whiskeylake and Coffeelake platforms consuming Intel
FSP (https://github.com/IntelFsp) for silicon initialization
including CAR and memory initialization.
The Slim Bootloader generates new HOB (Hand Off Block) which are
serial port info, memory map info, performance data info and so on,
and passes it to a Payload. U-Boot as a payload will use these HOB
information for basic initialization such as serial console.
As an initial commit,
- Add CONFIG_SYS_SLIMBOOTLOADER to enable slimbootloader CPU type
- Add new arch/x86/cpu/slimbootloader directory with minimum codes
- Get hob_list pointer from Slim Bootloader
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Bernhard Messerklinger [Fri, 2 Aug 2019 06:38:34 +0000 (08:38 +0200)]
x86: ich-spi: Convert driver to spi-mem ops
With the introduction of the new spi-mem model operations changed
slightly. The new spi-mem operations make things a bit easier to
handle for ich-spi flash interface. This patch converts the ich-spi
driver by using spi-mem operations.
Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested on Intel CrownBay and MinnowMax
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fix compiler warnings when building the driver for 64-bit]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Heinrich Schuchardt [Thu, 1 Aug 2019 17:37:08 +0000 (19:37 +0200)]
bios_emulator: remove stray break
Remove a stray break which suppresses some debug messages.
Indicated by cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 28 Jul 2019 20:16:28 +0000 (14:16 -0600)]
x86: Avoid writing temporary asl files into the source tree
At present the iasl tool (Intel ACPI (Advanced Configuration and Power
Interface) Source Language Compiler) is called in such a way that it uses
the source directory for its temporary files.
This means we end up with these files when building x86 boards:
board/dfi/dfi-bt700/dsdt.aml
board/dfi/dfi-bt700/dsdt.asl.tmp
Update the code to put temporary files in the target directory instead.
The iasl tool is quite confusing since it generates files with different
extensions and does not allow these to be individually specified. Add some
documentation to help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: remove dsdt.hex from 'make clean' rules and correct U-Boot spelling]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Sun, 14 Jul 2019 16:23:59 +0000 (19:23 +0300)]
x86: tangier: Populate CSRT for shared DMA controller
Intel Tangier has a shared DMA controller that, according to Microsoft spec,
has to be presented in CSRT table.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Sun, 14 Jul 2019 16:23:58 +0000 (19:23 +0300)]
x86: acpi: Enable ACPI companion for Intel iDMA 32-bit
ACPI has a capability to specify DMA parameters for DMA channel consumers.
To enable this for Intel Edison, describe GP DMA device in ACPI table
in order to get an ACPI handle to it in OS.
This works in conjunction with CSRT, which must be in align with DSDT.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Sun, 14 Jul 2019 16:23:57 +0000 (19:23 +0300)]
x86: acpi: Introduce a stub to generate CSRT
Here is a stub function that generates an empty CSRT. If the target platform
provides acpi_fill_csrt() function, it will be used to populate the table.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Sun, 14 Jul 2019 16:23:56 +0000 (19:23 +0300)]
x86: acpi: Add CSRT description
Add CSRT [1] description as it provided in Linux kernel.
[1]: http://www.uefi.org/sites/default/files/resources/CSRT%20v2.pdf
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Sun, 28 Jul 2019 15:13:58 +0000 (08:13 -0700)]
x86: qemu: Fix non-working ramboot and nfsboot environment variables
With qemu-x86 starting to use config_distro_bootcmd, the pre-defined
ramboot and nfsboot commands do not work any more. This is caused by
undefined environment variable 'ramdiskaddr' that was previously set
in CONFIG_EXTRA_ENV_SETTINGS but later CONFIG_EXTRA_ENV_SETTINGS was
redefined for distro boot.
Update the x86 generic CONFIG_EXTRA_ENV_SETTINGS to consider distro
boot, and remove the one in qemu-x86.h.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Joshua Watt [Wed, 3 Jul 2019 17:45:32 +0000 (12:45 -0500)]
qemu-x86: Use config_distro_bootcmd
Converts qemu x86 machines to boot using distro_config. The intent is to
allow u-boot in qemu to be maximally compatible with many boot methods
without having to change the config. Previously, u-boot would only boot
in a very limited set of circumstances where there was a /boot/vmlinuz
on scsi 0:3 with no ramdisk.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: convert doc updates to reST]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Tue, 25 Jun 2019 20:52:04 +0000 (23:52 +0300)]
x86: edison: Enable SD slot
Enable SD slot on Intel Edison platform.
By default firmware doesn't put device on active state. Thus,
we have to do this explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Fri, 9 Aug 2019 11:29:54 +0000 (07:29 -0400)]
Merge tag 'mmc-8-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- mmc test fix
- sdhci driver fix
Tom Rini [Fri, 9 Aug 2019 11:29:20 +0000 (07:29 -0400)]
Merge tag 'u-boot-rockchip-
20190809' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add rk3399 boards Khadas Edge/-V/-Captain
- Add fully souce code support for rk3328 including TPL/DRAM init
- Enable boot from eMMC for rk3399 rock960/ficus boards
- turn on the IO supply for dw_mmc
Peng Fan [Tue, 6 Aug 2019 02:48:04 +0000 (02:48 +0000)]
mmc: tangier_sdhci: fix uninitialized pointer deref on probe
Commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field.
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Vincent Tinelli <vincent.tinelli@intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 6 Aug 2019 02:48:02 +0000 (02:48 +0000)]
mmc: sdhci-cadence: fix uninitialized pointer deref on probe
Commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field.
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Peng Fan [Tue, 6 Aug 2019 02:47:59 +0000 (02:47 +0000)]
mmc: s5p: fix uninitialized pointer deref on probe
Commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field.
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 6 Aug 2019 02:47:56 +0000 (02:47 +0000)]
mmc: pci: fix uninitialized pointer deref on probe
Commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field.
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 6 Aug 2019 02:47:53 +0000 (02:47 +0000)]
mmc: msm_sdhci: fix uninitialized pointer deref on probe
Commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field.
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 6 Aug 2019 02:47:50 +0000 (02:47 +0000)]
mmc: bcm: fix uninitialized pointer deref on probe
Commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field.
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 6 Aug 2019 02:47:47 +0000 (02:47 +0000)]
mmc: atmel_sdhci: fix uninitialized pointer deref on probe
Commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field.
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Michal Simek [Fri, 2 Aug 2019 04:48:44 +0000 (06:48 +0200)]
test/py: Fix MMC/SD block write test dependency
Test is using random command which has own Kconfig symbol CMD_RANDOM which
already depends on CMD_MEMORY. That's why replace cmd_memory by cmd_random.
Fixes:
09da18deab8b ("test/py: add MMC/SD block write test")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Matwey V. Kornilov [Thu, 1 Aug 2019 15:00:05 +0000 (18:00 +0300)]
mmc: zynq_sdhci: fix uninitialized pointer deref on probe
Since commit
3d296365e4e8 ("mmc: sdhci: Add support for
sdhci-caps-mask") sdhci_setup_cfg() expects a valid sdhci_host mmc
field. Move the mmc field initialization before sdhci_setup_cfg()
call to avoid crash on mmc pointer dereference.
[this patch is based on commit
41a9fab8dac8 ("mmc: mv_sdhci: fix
uninitialized pointer deref on probe") by Baruch Siach]
Fixes:
3d296365e4e8 ("mmc: sdhci: Add support for sdhci-caps-mask")
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu102/zc706)
Faiz Abbas [Thu, 1 Aug 2019 11:03:36 +0000 (16:33 +0530)]
mmc: Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected
Select SPL_HS200_SUPPORT if SPL_HS400_SUPPORT is selected as is being
done for the U-boot case.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tom Rini [Thu, 8 Aug 2019 13:19:08 +0000 (09:19 -0400)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Remove unused bcm2835 watchdog driver (still non-DM)
- Cosmetic fixup of mtk_wdt.c
Sam Protsenko [Wed, 3 Jul 2019 16:34:07 +0000 (19:34 +0300)]
fastboot: Remove "bootloader-version" variable
As per [1], there is no such fastboot variable as "bootloader-version".
Only "version-bootloader" is supported. Let's reflect this and not
confuse users further.
[1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md
Fixes:
3aab70afc531d1 ("usb/gadget: add the fastboot gadget")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Sam Protsenko [Wed, 3 Jul 2019 16:00:22 +0000 (19:00 +0300)]
fastboot: getvar: Add "is-userspace" variable
As per documentation [1], Android-Q requires for bootloader to provide
"is-userspace" variable. "no" value should be always returned. This
patch implements this fastboot variable.
[1] https://android.googlesource.com/platform/system/core/+/refs/tags/android-q-preview-4/fastboot/README.md
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Ralph Siemsen [Fri, 28 Jun 2019 14:42:02 +0000 (10:42 -0400)]
usb: gadget: f_dfu.c: fix memory leak
dfu_prepare_function() allocates N+1 descriptor header structures,
the last one being the "DFU Functional Descriptor".
dfu_unbind() handles de-allocation, but fails to free the final
one (eg. "DFU Functional Descriptor"), leading to memory leak.
Fixed by incrementing counter, as in dfu_prepare_function().
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Marek Szyprowski [Fri, 21 Jun 2019 13:39:29 +0000 (15:39 +0200)]
thor: fix crash after usb initialization failure
Registration of USB download gadget might fail for various reasons, so
add a check for g_dnl_register() funtion return value. Without this fix,
thor_init() will try to access the registered gadget structures resulting
in NULL pointer dereference issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Sam Protsenko [Tue, 18 Jun 2019 14:55:25 +0000 (17:55 +0300)]
fastboot: Remove "slot-suffixes" variable
"slot-suffixes" variable was dropped in fastboot tool (in [1]). Let's
track AOSP/master and drop this variable in U-Boot as well.
[1] https://android.googlesource.com/platform/system/core/+/
42b18a518bac85c3eea14206f6cbafbd1e98a31f
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[lukma: Remove getvar_slot_suffixes() declaration]
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Heiko Schocher [Tue, 16 Jul 2019 08:49:07 +0000 (10:49 +0200)]
usb, ohci, pci: add DM support for PCI-based OHCI USB controller
add new DM based PCI driver ohci-pci for PCI-based
OHCI USB support.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Tue, 16 Jul 2019 08:49:06 +0000 (10:49 +0200)]
usb, ohci: add warning if none on pci found
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Tue, 16 Jul 2019 08:49:05 +0000 (10:49 +0200)]
usb, ohci-hcd: set OHCI_USE_NPS if DM_PCI
set OHCI_USE_NPS if DM_PCI is enabled.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Tue, 16 Jul 2019 08:49:04 +0000 (10:49 +0200)]
usb, ohci: fix ohci swap register access
commit
57faca19a82f ("drivers: USB: OHCI: allow compilation for 64-bit targets")
broke ohci support for the mpc85xx based socrates board,
as it removed volatile keyword from ohci_readl/writel.
Fix this so usb works again on socrates board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Tue, 16 Jul 2019 08:49:03 +0000 (10:49 +0200)]
usb, ohci-hdc: fix warning 'ohci_pci_ids' defined but not used
var ohci_pci_ids is only used if DM_USB is not enabled.
So define this varaible only if
!CONFIG_IS_ENABLED(DM_USB)
Signed-off-by: Heiko Schocher <hs@denx.de>
Adam Ford [Wed, 10 Jul 2019 18:59:11 +0000 (13:59 -0500)]
ARM: da850-evm: Enable the USB PHY and MUSB Driver
This patch will enable the MUSB driver to support mass storage
devices connected to the OTG port in host mode.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Wed, 10 Jul 2019 18:59:10 +0000 (13:59 -0500)]
usb: musb-new: Add support for da8xx-musb
With the recently added phy driver, this patch will enable the
musb driver on the da8xx to operate in host mode.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Wed, 10 Jul 2019 18:59:09 +0000 (13:59 -0500)]
phy: Add support for phy-da8xx-usb
In preparation for supporting the musb driver, this patch
adds support for the usb phy associated with the musb driver.
Signed-off-by: Adam Ford <aford173@gmail.com>
Sam Protsenko [Tue, 2 Jul 2019 18:18:02 +0000 (21:18 +0300)]
test/py: avb: Move AVB test to android dir
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tom Rini [Thu, 8 Aug 2019 03:13:35 +0000 (23:13 -0400)]
Merge branch '2019-08-07-master-imports'
- Misc Android / AVB bugfixes (including updating the header from
Android).
- MediaTek updates
- Other assorted bugfixes.