platform/adaptation/renesas_rcar/renesas_kernel.git
13 years agoRevert "OMAP4: hwmod data: Prevent timer1 to be reset and idle during init"
Benoit Cousson [Fri, 4 Mar 2011 15:01:43 +0000 (16:01 +0100)]
Revert "OMAP4: hwmod data: Prevent timer1 to be reset and idle during init"

The following commit: 38698be:
OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init

Fixed properly the issue with early init for the timer1

So reverts commit 3b03b58dab847883e6b9a431558c7d8e43fa94c6 that is now
generated a warning at boot time.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoMerge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc...
Tony Lindgren [Thu, 3 Mar 2011 01:11:18 +0000 (17:11 -0800)]
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus

Conflicts:
arch/arm/mach-omap2/omap_hwmod_44xx_data.c

13 years agoMerge branch 'devel-cleanup' into omap-for-linus
Tony Lindgren [Thu, 3 Mar 2011 01:07:14 +0000 (17:07 -0800)]
Merge branch 'devel-cleanup' into omap-for-linus

Conflicts:
arch/arm/mach-omap2/timer-gp.c

13 years agomfd: twl4030_codec: Remove unused and duplicate audio_mclk fields
Ilkka Koskinen [Wed, 2 Mar 2011 13:24:06 +0000 (13:24 +0000)]
mfd: twl4030_codec: Remove unused and duplicate audio_mclk fields

audio_mclk can be queried from mfd driver. Therefore, it is not
needed in twl4030_codec_audio_data or in twl4030_codec_vibra_data
anymore.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap: Remove unnecessary twl4030_codec_audio settings from board files
Ilkka Koskinen [Wed, 2 Mar 2011 13:24:05 +0000 (13:24 +0000)]
omap: Remove unnecessary twl4030_codec_audio settings from board files

twl4030_codec_audio and twl4030_codec_vibra_data has unused field.
In order to remove it, corresponding settings needs to be removed
from board files.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap: rx51: Add support for vibra
Ilkka Koskinen [Fri, 25 Feb 2011 08:46:23 +0000 (08:46 +0000)]
omap: rx51: Add support for vibra

Add support for vibra

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap: panda: Add TI-ST driver support
Guy Eilam [Fri, 25 Feb 2011 06:52:35 +0000 (06:52 +0000)]
omap: panda: Add TI-ST driver support

Added the KIM (Kernel initialization module for the
Shared Transport driver) device entry in the board file

Only the Blutooth enable GPIO is set for now

Signed-off-by: Guy Eilam <guy@wizery.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoldp: Fix regulator mapping for ads7846 TS controller
Tony Lindgren [Thu, 24 Feb 2011 12:56:42 +0000 (12:56 +0000)]
ldp: Fix regulator mapping for ads7846 TS controller

On the OMAP3430LDP board, the ads7846 touchscreen controller
is powered by VAUX1 regulator (supplying 3.0v).
Fix this mapping in the board file, and hence prevent
the ads7846 driver init to fail with the below error..

ads7846 spi1.0: unable to get regulator: -19

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoarm: omap: fix section mismatch warning
Ming Lei [Wed, 2 Mar 2011 22:41:46 +0000 (06:41 +0800)]
arm: omap: fix section mismatch warning

WARNING: arch/arm/plat-omap/built-in.o(.data+0x6d4): Section mismatch in reference from the variable omap_driver to the function .init.text:omap_cpu_init()
The variable omap_driver references
the function __init omap_cpu_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoLinux 2.6.38-rc7
Linus Torvalds [Tue, 1 Mar 2011 21:55:12 +0000 (13:55 -0800)]
Linux 2.6.38-rc7

13 years agoRevert "TPM: Long default timeout fix"
Linus Torvalds [Tue, 1 Mar 2011 21:23:27 +0000 (13:23 -0800)]
Revert "TPM: Long default timeout fix"

This reverts commit c4ff4b829ef9e6353c0b133b7adb564a68054979.

Ted Ts'o reports:

 "TPM is working for me so I can log into employer's network in 2.6.37.
  It broke when I tried 2.6.38-rc6, with the following relevant lines
  from my dmesg:

  [   11.081627] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
  [   25.734114] tpm_tis 00:0b: Operation Timed out
  [   78.040949] tpm_tis 00:0b: Operation Timed out

  This caused me to get suspicious, especially since the _other_ TPM
  commit in 2.6.38 had already been reverted, so I tried reverting
  commit c4ff4b829e: "TPM: Long default timeout fix".  With this commit
  reverted, my TPM on my Lenovo T410 is once again working."

Requested-and-tested-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoOMAP: hsmmc: Rename the device and driver
Kishore Kadiyala [Mon, 28 Feb 2011 15:18:05 +0000 (20:48 +0530)]
OMAP: hsmmc: Rename the device and driver

Modifying the device & driver name from "mmci-omap-hs" to
"omap_hsmmc".

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Acked-by: Benoit Cousson<b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP: adapt hsmmc to hwmod framework
Kishore Kadiyala [Mon, 28 Feb 2011 15:18:04 +0000 (20:48 +0530)]
OMAP: adapt hsmmc to hwmod framework

OMAP2420 platform consists of mmc block as in omap1 and not the
hsmmc block as present in omap2430, omap3, omap4 platforms.
Removing all base address macro defines except keeping one for OMAP2420 and
adapting only hsmmc device registration and driver to hwmod framework.

Changes involves:
1) Remove controller reset in devices.c which is taken care of
   by hwmod framework.
2) Using omap-device layer to register device and utilizing data from
   hwmod data file for base address, dma channel number, Irq_number,
   device attribute.
3) Update the driver to use dev_attr to find whether controller
   supports dual volt cards

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Reviewed-by: Balaji T K <balajitk@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
CC: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP: hsmmc: Move mux configuration to hsmmc.c
Kishore Kadiyala [Mon, 28 Feb 2011 15:18:03 +0000 (20:48 +0530)]
OMAP: hsmmc: Move mux configuration to hsmmc.c

Moving the definition of mux setting API from devices.c to hsmmc.c
and renaming it from "omap2_mmc_mux" to "omap_hsmmc_mux".
Also calling "omap_hsmmc_mux" from omap2_hsmmc_init.

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Chris Ball <cjb@laptop.org
Cc: Tony Lindgren <tony@atomide.com
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP: hwmod data: Add dev_attr and use in the host driver
Kishore Kadiyala [Tue, 1 Mar 2011 21:12:56 +0000 (13:12 -0800)]
OMAP: hwmod data: Add dev_attr and use in the host driver

Add a device attribute to hwmod data of omap2430, omap3, omap4.
Currently the device attribute holds information regarding dual volt MMC card
support by the controller which will be later passed to the host driver via
platform data.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Acked-by: Benoit Cousson<b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP4: hwmod data: enable HSMMC
Anand Gadiyar [Tue, 1 Mar 2011 21:12:56 +0000 (13:12 -0800)]
OMAP4: hwmod data: enable HSMMC

Enabling hsmmc hwmod for OMAP4

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Acked-by: Benoit Cousson<b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP3: hwmod data: Add HSMMC
Paul Walmsley [Tue, 1 Mar 2011 21:12:56 +0000 (13:12 -0800)]
OMAP3: hwmod data: Add HSMMC

Update the omap3 hwmod data with the HSMMC info.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP2430: hwmod data: Add HSMMC
Paul Walmsley [Tue, 1 Mar 2011 21:12:55 +0000 (13:12 -0800)]
OMAP2430: hwmod data: Add HSMMC

Update the omap2430 hwmod data with the HSMMC info.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap: mmc: split out init for 2420
Anand Gadiyar [Tue, 1 Mar 2011 21:12:55 +0000 (13:12 -0800)]
omap: mmc: split out init for 2420

The MMC controller on the OMAP2420 is different from those
on the OMAP2430, OMAP3 and OMAP4 families - all of the latter
are identical. The one on the OMAP2420 is closer to that
on OMAP1 chips.

Currently, the n8x0 is the only OMAP2420 platform supported
in mainline which registers the MMC controller. Upcoming
changes to register the controllers using hwmod data are
potentially invasive. To reduce the risk, separate out the
2420 controller registration from the common init function
and update its only user. Also seperating out mux settings
for OMAP2420.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap: omap3evm: add support for the WL12xx WLAN module to the omap3evm
Eyal Reizer [Sun, 27 Feb 2011 10:45:18 +0000 (10:45 +0000)]
omap: omap3evm: add support for the WL12xx WLAN module to the omap3evm

This patch is again current omap-for-linus branch

Adds platform initialization for working with the WLAN module
attached to the omap3evm.
The patch includes MMC2 initialization, SDIO and control pins
muxing and platform device registration.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Tue, 1 Mar 2011 02:09:02 +0000 (18:09 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (adt7411) add MODULE_DEVICE_TABLE
  hwmon: (ad7414) add MODULE_DEVICE_TABLE

13 years agofs/block_dev.c: fix new kernel-doc warning
Randy Dunlap [Sat, 26 Feb 2011 18:54:00 +0000 (10:54 -0800)]
fs/block_dev.c: fix new kernel-doc warning

Fix new kernel-doc warning in fs/block_dev.c:

Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoACPI: Fix build for CONFIG_NET unset
Rafael J. Wysocki [Tue, 1 Mar 2011 00:12:19 +0000 (01:12 +0100)]
ACPI: Fix build for CONFIG_NET unset

Several ACPI drivers fail to build if CONFIG_NET is unset, because
they refer to things depending on CONFIG_THERMAL that in turn depends
on CONFIG_NET.  However, CONFIG_THERMAL doesn't really need to depend
on CONFIG_NET, because the only part of it requiring CONFIG_NET is
the netlink interface in thermal_sys.c.

Put the netlink interface in thermal_sys.c under #ifdef CONFIG_NET
and remove the dependency of CONFIG_THERMAL on CONFIG_NET from
drivers/thermal/Kconfig.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Len Brown <lenb@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Luming Yu <luming.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'hwmod_clockevent_2.6.39' of git://git.pwsan.com/linux-2.6 into omap...
Tony Lindgren [Tue, 1 Mar 2011 01:58:09 +0000 (17:58 -0800)]
Merge branch 'hwmod_clockevent_2.6.39' of git://git.pwsan.com/linux-2.6 into omap-for-linus

13 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Tue, 1 Mar 2011 01:58:09 +0000 (17:58 -0800)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

13 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 1 Mar 2011 01:57:30 +0000 (17:57 -0800)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap4: prcm: Fix the CPUx clockdomain offsets
  OMAP2+: clocksource: fix crash on boot when !CONFIG_OMAP_32K_TIMER
  OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL
  OMAP2+: mailbox: fix lookups for multiple mailboxes
  OMAP2420: mailbox: fix IVA vs DSP IRQ numbering
  mach-omap2: smartreflex: world-writable debugfs voltage files
  mach-omap2: pm: world-writable debugfs timer files
  mach-omap2: mux: world-writable debugfs files

13 years agoMerge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and 'timers-fixes-for...
Linus Torvalds [Tue, 1 Mar 2011 01:55:08 +0000 (17:55 -0800)]
Merge branches 'perf-fixes-for-linus', 'x86-fixes-for-linus' and 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf timechart: Fix max number of cpus
  perf timechart: Fix black idle boxes in the title
  perf hists: Print number of samples, not the period sum

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Use u32 instead of long to set reset vector back to 0

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevents: Prevent oneshot mode when broadcast device is periodic

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Tue, 1 Mar 2011 01:53:04 +0000 (17:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix truncate after open
  fuse: fix hang of single threaded fuseblk filesystem

13 years agoOMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus
Paul Walmsley [Sat, 26 Feb 2011 00:38:25 +0000 (17:38 -0700)]
OMAP2+: sdrc: fix compile break on OMAP4-only config on current omap-for-linus

On non-OMAP2 and non-OMAP3 kernel configs, turn omap2_sdrc_init() into
a no-op.  Otherwise, compilation breaks on an OMAP4-only config with
the current omap-for-linus branch:

arch/arm/mach-omap2/built-in.o: In function `omap2_init_common_devices':
../mach-omap2/io.c:421: undefined reference to `omap2_sdrc_init'

Thanks to Sergei Shtylyov <sshtylyov@mvista.com> for suggesting the use
of a empty static inline function rather than a macro.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
[tony@atomide.com: updated not to use __init for inline omap2_sdrc_init]
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Tue, 1 Mar 2011 01:52:47 +0000 (17:52 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Check heartbeat mode for kernel stacks only
  Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number.
  ocfs2: Fix estimate of necessary credits for mkdir

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Tue, 1 Mar 2011 01:47:09 +0000 (17:47 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  eukrea-tlv320: fix platform_name
  ASoC: correct pxa AC97 DAI names
  ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs
  ALSA: HDA: Add ideapad quirk for two Dell machines
  ALSA: HDA: Add a new Conexant codec 506e (20590)
  ALSA: usb-audio: fix oops due to cleanup race when disconnecting
  ASoC: Hook wm_hubs micbiases up to CLK_SYS
  ASoC: Correct definition of WM8903_VMID_RES_5K
  ASoC: Fix WM8958 default microphone detection argument ordering
  ALSA: HDA: Fix mic initialization in VIA auto parser
  ALSA: fix one memory leak in sound jack

13 years agomm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
Ben Hutchings [Sun, 27 Feb 2011 05:41:35 +0000 (05:41 +0000)]
mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>

Commit e2cda3226481 ("thp: add pmd mangling generic functions") replaced
some macros in <asm-generic/pgtable.h> with inline functions.

If the functions are to be defined (not all architectures need them)
then struct vm_area_struct must be defined first.  So include
<linux/mm_types.h>.

Fixes a build failure seen in Debian:

    CC [M]  drivers/media/dvb/mantis/mantis_pci.o
  In file included from arch/arm/include/asm/pgtable.h:460,
                   from drivers/media/dvb/mantis/mantis_pci.c:25:
  include/asm-generic/pgtable.h: In function 'ptep_test_and_clear_young':
  include/asm-generic/pgtable.h:29: error: dereferencing pointer to incomplete type

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoOMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init
Paul Walmsley [Wed, 23 Feb 2011 07:14:08 +0000 (00:14 -0700)]
OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init

Set up the GPTIMER hwmod used for the clockevent source immediately
before it is used.  This avoids the need to set up all of the hwmods
until the boot process is further along.  (In general, we want to defer
as much as possible until late in the boot process.)

This second version fixes a bug pointed out by Santosh Shilimkar
<santosh.shilimkar@ti.com>, that would cause the kernel to use an
incorrect timer hwmod name if the selected GPTIMER was not 1 or 12 -
thanks Santosh.  Also, Tarun Kanti DebBarma <tarun.kanti@ti.com>
pointed out that the original patch did not apply cleanly; this has
now been fixed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
13 years agoOMAP2+: hwmod: add ability to setup individual hwmods
Paul Walmsley [Wed, 23 Feb 2011 07:14:07 +0000 (00:14 -0700)]
OMAP2+: hwmod: add ability to setup individual hwmods

Add omap_hwmod_setup_one(), which is intended for use early in boot to
selectively setup the hwmods needed for system clocksources and
clockevents, and any other hwmod that is needed in early boot.
omap_hwmod_setup_all() can then be called later in the boot process.
The point is to minimize the amount of code that needs to be run
early.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
13 years agoOMAP2+: hwmod: ignore attempts to re-setup a hwmod
Paul Walmsley [Wed, 23 Feb 2011 07:14:07 +0000 (00:14 -0700)]
OMAP2+: hwmod: ignore attempts to re-setup a hwmod

Previously, if a hwmod had already been set up, and the code attempted
to set up the hwmod again, an error would be returned.  This is not
really useful behavior if we wish to allow the OMAP core code to setup
the hwmods needed for the Linux clocksources and clockevents before
the rest of the hwmods are setup.  So, instead of generating errors,
just ignore the attempt to re-setup the hwmod.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
13 years agoOMAP2+: hwmod: find MPU initiator hwmod during in _register()
Paul Walmsley [Wed, 23 Feb 2011 07:14:06 +0000 (00:14 -0700)]
OMAP2+: hwmod: find MPU initiator hwmod during in _register()

Move the code that looks for the MPU initiator hwmod to run during
the individual hwmod _register() function.  (Previously, it ran after
all hwmods were registered in the omap_hwmod_late_init() function.)

This is done so code can late-initialize a few individual hwmods --
for example, for the system timer -- before the entire set of hwmods is
initialized later in boot via omap_hwmod_late_init().

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
13 years agoOMAP2+: hwmod: rename some init functions
Paul Walmsley [Mon, 28 Feb 2011 18:58:14 +0000 (11:58 -0700)]
OMAP2+: hwmod: rename some init functions

Rename omap_hwmod_init() to omap_hwmod_register().  Rename
omap_hwmod_late_init() to omap_hwmod_setup_all().  Also change all of
the callers to reflect the new names.  While here, update some
copyrights.

Suggested by Tony Lindgren <tony@atomide.com>.

N.B. The comment in mach-omap2/serial.c may no longer be correct, given
     recent changes in init order.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
13 years agoOMAP2+: hwmod: allow multiple calls to omap_hwmod_init()
Paul Walmsley [Wed, 23 Feb 2011 07:14:06 +0000 (00:14 -0700)]
OMAP2+: hwmod: allow multiple calls to omap_hwmod_init()

There's no longer any reason why we should prevent multiple
calls to omap_hwmod_init().  It is now simply used to register an
array of hwmods.

This should allow a subset of hwmods (e.g., hwmods
handling the system clocksource and clockevents) to be registered
earlier than the remaining mass of hwmods.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
13 years agox86: Use u32 instead of long to set reset vector back to 0
Don Zickus [Tue, 8 Feb 2011 04:25:00 +0000 (23:25 -0500)]
x86: Use u32 instead of long to set reset vector back to 0

A customer of ours, complained that when setting the reset
vector back to 0, it trashed other data and hung their box.
They noticed when only 4 bytes were set to 0 instead of 8,
everything worked correctly.

Mathew pointed out:

 |
 | We're supposed to be resetting trampoline_phys_low and
 | trampoline_phys_high here, which are two 16-bit values.
 | Writing 64 bits is definitely going to overwrite space
 | that we're not supposed to be touching.
 |

So limit the area modified to u32.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoperf timechart: Fix max number of cpus
Thomas Renninger [Sun, 27 Feb 2011 21:36:46 +0000 (22:36 +0100)]
perf timechart: Fix max number of cpus

Currently numcpus is determined in pid_put_sample which is only
called on sched_switch/sched_wakeup sample processing.

On a machine with a lot cpus I often saw the last cpu missing.

Check for (max) numcpus on every event happening and in the
beginning. -> fixes the issue for me.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoperf timechart: Fix black idle boxes in the title
Thomas Renninger [Sun, 27 Feb 2011 21:36:45 +0000 (22:36 +0100)]
perf timechart: Fix black idle boxes in the title

This fix is needed for eye of gnome and firefox svg viewers.
Only Inkscape can handle the broken case.

Compare with the other svg_legenda_box declarations, looks
like a typo slipped in at this place.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: lenb@kernel.org
LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into...
Dave Airlie [Mon, 28 Feb 2011 05:35:16 +0000 (15:35 +1000)]
Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into drm-fixes

* 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next:
  drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

13 years agodrm: fix unsigned vs signed comparison issue in modeset ctl ioctl.
Dave Airlie [Wed, 23 Feb 2011 22:35:06 +0000 (08:35 +1000)]
drm: fix unsigned vs signed comparison issue in modeset ctl ioctl.

This fixes CVE-2011-1013.

Reported-by: Matthiew Herrb (OpenBSD X.org team)
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo
Ben Skeggs [Mon, 28 Feb 2011 04:22:12 +0000 (14:22 +1000)]
drm/nv50-nvc0: make sure vma is definitely unmapped when destroying bo

Somehow fixes a misrendering + hang at GDM startup on my NVA8...

My first guess would have been stale TLB entries laying around that a new
bo then accidentally inherits.  That doesn't make a great deal of sense
however, as when we mapped the pages for the new bo the TLBs would've
gotten flushed anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
13 years agoOMAP3: hwmod data: add dmtimer
Thara Gopinath [Wed, 23 Feb 2011 07:14:05 +0000 (00:14 -0700)]
OMAP3: hwmod data: add dmtimer

Add dmtimer data.

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
13 years agoOMAP2430: hwmod data: add dmtimer
Thara Gopinath [Wed, 23 Feb 2011 07:14:05 +0000 (00:14 -0700)]
OMAP2430: hwmod data: add dmtimer

Add dmtimer data.

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
13 years agoOMAP2420: hwmod data: add dmtimer
Thara Gopinath [Wed, 23 Feb 2011 07:14:04 +0000 (00:14 -0700)]
OMAP2420: hwmod data: add dmtimer

Add dmtimer data.

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
13 years agohwmon: (adt7411) add MODULE_DEVICE_TABLE
axel lin [Thu, 24 Feb 2011 02:22:01 +0000 (02:22 +0000)]
hwmon: (adt7411) add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
13 years agohwmon: (ad7414) add MODULE_DEVICE_TABLE
axel lin [Thu, 24 Feb 2011 02:20:37 +0000 (02:20 +0000)]
hwmon: (ad7414) add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
13 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 26 Feb 2011 10:27:47 +0000 (11:27 +0100)]
Merge branch 'fix/asoc' into for-linus

13 years agoclockevents: Prevent oneshot mode when broadcast device is periodic
Thomas Gleixner [Fri, 25 Feb 2011 21:34:23 +0000 (22:34 +0100)]
clockevents: Prevent oneshot mode when broadcast device is periodic

When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only
can switch into oneshot mode, when the backup broadcast device
supports oneshot mode as well. Otherwise we would try to switch the
broadcast device into an unsupported mode unconditionally. This went
unnoticed so far as the current available broadcast devices support
oneshot mode. Seth unearthed this problem while debugging and working
around an hpet related BIOS wreckage.

Add the necessary check to tick_is_oneshot_available().

Reported-and-tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6>
Cc: stable@kernel.org # .21 ->
13 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Fri, 25 Feb 2011 23:15:17 +0000 (15:15 -0800)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset

13 years agorapidio: fix sysfs config attribute to access 16MB of maint space
Alexandre Bounine [Fri, 25 Feb 2011 22:44:31 +0000 (14:44 -0800)]
rapidio: fix sysfs config attribute to access 16MB of maint space

Fixes sysfs config attribute to allow access to entire 16MB maintenance
space of RapidIO devices.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agopps: initialize ts_real properly
Alexander Gordeev [Fri, 25 Feb 2011 22:44:30 +0000 (14:44 -0800)]
pps: initialize ts_real properly

Initialize ts_real.flags to fix compiler warning about possible
uninitialized use of this field.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomemcg: more mem_cgroup_uncharge() batching
Hugh Dickins [Fri, 25 Feb 2011 22:44:29 +0000 (14:44 -0800)]
memcg: more mem_cgroup_uncharge() batching

It seems odd that truncate_inode_pages_range(), called not only when
truncating but also when evicting inodes, has mem_cgroup_uncharge_start
and _end() batching in its second loop to clear up a few leftovers, but
not in its first loop that does almost all the work: add them there too.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agothp: fix interleaving for transparent hugepages
Andi Kleen [Fri, 25 Feb 2011 22:44:28 +0000 (14:44 -0800)]
thp: fix interleaving for transparent hugepages

The THP code didn't pass the correct interleaving shift to the memory
policy code.  Fix this here by adjusting for the order.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoaio: fix race between io_destroy() and io_submit()
Jan Kara [Fri, 25 Feb 2011 22:44:27 +0000 (14:44 -0800)]
aio: fix race between io_destroy() and io_submit()

A race can occur when io_submit() races with io_destroy():

 CPU1 CPU2
io_submit()
  do_io_submit()
    ...
    ctx = lookup_ioctx(ctx_id);
io_destroy()
    Now do_io_submit() holds the last reference to ctx.
    ...
    queue new AIO
    put_ioctx(ctx) - frees ctx with active AIOs

We solve this issue by checking whether ctx is being destroyed in AIO
submission path after adding new AIO to ctx.  Then we are guaranteed that
either io_destroy() waits for new AIO or we see that ctx is being
destroyed and bail out.

Cc: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoaio: fix rcu ioctx lookup
Nick Piggin [Fri, 25 Feb 2011 22:44:26 +0000 (14:44 -0800)]
aio: fix rcu ioctx lookup

aio-dio-invalidate-failure GPFs in aio_put_req from io_submit.

lookup_ioctx doesn't implement the rcu lookup pattern properly.
rcu_read_lock does not prevent refcount going to zero, so we might take
a refcount on a zero count ioctx.

Fix the bug by atomically testing for zero refcount before incrementing.

[jack@suse.cz: added comment into the code]
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: fix dubious code in __count_immobile_pages()
Namhyung Kim [Fri, 25 Feb 2011 22:44:25 +0000 (14:44 -0800)]
mm: fix dubious code in __count_immobile_pages()

When pfn_valid_within() failed 'iter' was incremented twice.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip
Lei Xu [Fri, 25 Feb 2011 22:44:23 +0000 (14:44 -0800)]
drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip

In linux rtc_time struct, tm_mon range is 0~11, tm_wday range is 0~6,
while in RTC HW REG, month range is 1~12, day of the week range is 1~7,
this patch adjusts difference of them.

The efect of this bug was that most of month will be operated on as the
next month by the hardware (When in Jan it maybe even worse).  For
example, if in May, software wrote 4 to the hardware, which handled it as
April.  Then the logic would be different between software and hardware,
which would cause weird things to happen.

Signed-off-by: Lei Xu <B33228@freescale.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Jack Lan <jack.lan@freescale.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoldm: corrupted partition table can cause kernel oops
Timo Warns [Fri, 25 Feb 2011 22:44:21 +0000 (14:44 -0800)]
ldm: corrupted partition table can cause kernel oops

The kernel automatically evaluates partition tables of storage devices.
The code for evaluating LDM partitions (in fs/partitions/ldm.c) contains
a bug that causes a kernel oops on certain corrupted LDM partitions.  A
kernel subsystem seems to crash, because, after the oops, the kernel no
longer recognizes newly connected storage devices.

The patch changes ldm_parse_vmdb() to Validate the value of vblk_size.

Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Acked-by: Richard Russon <ldm@flatcap.org>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: vmscan: stop reclaim/compaction earlier due to insufficient progress if !__GFP_REPEAT
Mel Gorman [Fri, 25 Feb 2011 22:44:20 +0000 (14:44 -0800)]
mm: vmscan: stop reclaim/compaction earlier due to insufficient progress if !__GFP_REPEAT

should_continue_reclaim() for reclaim/compaction allows scanning to
continue even if pages are not being reclaimed until the full list is
scanned.  In terms of allocation success, this makes sense but potentially
it introduces unwanted latency for high-order allocations such as
transparent hugepages and network jumbo frames that would prefer to fail
the allocation attempt and fallback to order-0 pages.  Worse, there is a
potential that the full LRU scan will clear all the young bits, distort
page aging information and potentially push pages into swap that would
have otherwise remained resident.

This patch will stop reclaim/compaction if no pages were reclaimed in the
last SWAP_CLUSTER_MAX pages that were considered.  For allocations such as
hugetlbfs that use __GFP_REPEAT and have fewer fallback options, the full
LRU list may still be scanned.

Order-0 allocation should not be affected because RECLAIM_MODE_COMPACTION
is not set so the following avoids the gfp_mask being examined:

        if (!(sc->reclaim_mode & RECLAIM_MODE_COMPACTION))
                return false;

A tool was developed based on ftrace that tracked the latency of
high-order allocations while transparent hugepage support was enabled and
three benchmarks were run.  The "fix-infinite" figures are 2.6.38-rc4 with
Johannes's patch "vmscan: fix zone shrinking exit when scan work is done"
applied.

  STREAM Highorder Allocation Latency Statistics
                 fix-infinite     break-early
  1 :: Count            10298           10229
  1 :: Min             0.4560          0.4640
  1 :: Mean            1.0589          1.0183
  1 :: Max            14.5990         11.7510
  1 :: Stddev          0.5208          0.4719
  2 :: Count                2               1
  2 :: Min             1.8610          3.7240
  2 :: Mean            3.4325          3.7240
  2 :: Max             5.0040          3.7240
  2 :: Stddev          1.5715          0.0000
  9 :: Count           111696          111694
  9 :: Min             0.5230          0.4110
  9 :: Mean           10.5831         10.5718
  9 :: Max            38.4480         43.2900
  9 :: Stddev          1.1147          1.1325

Mean time for order-1 allocations is reduced.  order-2 looks increased but
with so few allocations, it's not particularly significant.  THP mean
allocation latency is also reduced.  That said, allocation time varies so
significantly that the reductions are within noise.

Max allocation time is reduced by a significant amount for low-order
allocations but reduced for THP allocations which presumably are now
breaking before reclaim has done enough work.

  SysBench Highorder Allocation Latency Statistics
                 fix-infinite     break-early
  1 :: Count            15745           15677
  1 :: Min             0.4250          0.4550
  1 :: Mean            1.1023          1.0810
  1 :: Max            14.4590         10.8220
  1 :: Stddev          0.5117          0.5100
  2 :: Count                1               1
  2 :: Min             3.0040          2.1530
  2 :: Mean            3.0040          2.1530
  2 :: Max             3.0040          2.1530
  2 :: Stddev          0.0000          0.0000
  9 :: Count             2017            1931
  9 :: Min             0.4980          0.7480
  9 :: Mean           10.4717         10.3840
  9 :: Max            24.9460         26.2500
  9 :: Stddev          1.1726          1.1966

Again, mean time for order-1 allocations is reduced while order-2
allocations are too few to draw conclusions from.  The mean time for THP
allocations is also slightly reduced albeit the reductions are within
varianes.

Once again, our maximum allocation time is significantly reduced for
low-order allocations and slightly increased for THP allocations.

  Anon stream mmap reference Highorder Allocation Latency Statistics
  1 :: Count             1376            1790
  1 :: Min             0.4940          0.5010
  1 :: Mean            1.0289          0.9732
  1 :: Max             6.2670          4.2540
  1 :: Stddev          0.4142          0.2785
  2 :: Count                1               -
  2 :: Min             1.9060               -
  2 :: Mean            1.9060               -
  2 :: Max             1.9060               -
  2 :: Stddev          0.0000               -
  9 :: Count            11266           11257
  9 :: Min             0.4990          0.4940
  9 :: Mean        27250.4669      24256.1919
  9 :: Max      11439211.0000    6008885.0000
  9 :: Stddev     226427.4624     186298.1430

This benchmark creates one thread per CPU which references an amount of
anonymous memory 1.5 times the size of physical RAM.  This pounds swap
quite heavily and is intended to exercise THP a bit.

Mean allocation time for order-1 is reduced as before.  It's also reduced
for THP allocations but the variations here are pretty massive due to
swap.  As before, maximum allocation times are significantly reduced.

Overall, the patch reduces the mean and maximum allocation latencies for
the smaller high-order allocations.  This was with Slab configured so it
would be expected to be more significant with Slub which uses these size
allocations more aggressively.

The mean allocation times for THP allocations are also slightly reduced.
The maximum latency was slightly increased as predicted by the comments
due to reclaim/compaction breaking early.  However, workloads care more
about the latency of lower-order allocations than THP so it's an
acceptable trade-off.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/nfc/pn544.c: add missing regulator
Matti J. Aaltonen [Fri, 25 Feb 2011 22:44:19 +0000 (14:44 -0800)]
drivers/nfc/pn544.c: add missing regulator

The regulator framework is used for power management.  The regulators are
only named in the driver code, the actual control stuff is in the board
file for each architecture or use case.

The PN544 chip has three regulators that can be controlled or not -
depending on the architecture where the chip is being used.  So some of
the regulators may not be controllable.  In our current case the third
regulator, which was missing from the code, went unnoticed because we
didn't need to control it.  To be as general as possible - in this respect
- the driver needs to list all regulators.  Then the board file can be
used to actually set the usage.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/nfc/Kconfig: use full form of the NFC acronym
Matti J. Aaltonen [Fri, 25 Feb 2011 22:44:18 +0000 (14:44 -0800)]
drivers/nfc/Kconfig: use full form of the NFC acronym

Spell out the NFC acronym when it's shown for the first time.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoswiotlb: fix wrong panic
FUJITA Tomonori [Fri, 25 Feb 2011 22:44:16 +0000 (14:44 -0800)]
swiotlb: fix wrong panic

swiotlb's map_page wrongly calls panic() when it can't find a buffer fit
for device's dma mask.  It should return an error instead.

Devices with an odd dma mask (i.e.  under 4G) like b44 network card hit
this bug (the system crashes):

   http://marc.info/?l=linux-kernel&m=129648943830106&w=2

If swiotlb returns an error, b44 driver can use the own bouncing
mechanism.

Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMAINTAINERS: add Chinese documentation maintainer
Harry Wei [Fri, 25 Feb 2011 22:44:15 +0000 (14:44 -0800)]
MAINTAINERS: add Chinese documentation maintainer

I have translated some kernel documentation so I wish to maintain the
Chinese documentation in our kernel directories.

Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: grab rcu read lock in move_pages()
Greg Thelen [Fri, 25 Feb 2011 22:44:13 +0000 (14:44 -0800)]
mm: grab rcu read lock in move_pages()

The move_pages() usage of find_task_by_vpid() requires rcu_read_lock() to
prevent free_pid() from reclaiming the pid.

Without this patch, RCU warnings are printed in v2.6.38-rc4 move_pages()
with:

  CONFIG_LOCKUP_DETECTOR=y
  CONFIG_PREEMPT=y
  CONFIG_LOCKDEP=y
  CONFIG_PROVE_LOCKING=y
  CONFIG_PROVE_RCU=y

Previously, migrate_pages() went through a similar transformation
replacing usage of tasklist_lock with rcu read lock:

  commit 55cfaa3cbdd29c4919ecb5fb8965c310f357e48c
  Author: Zeng Zhaoming <zengzm.kernel@gmail.com>
  Date:   Thu Dec 2 14:31:13 2010 -0800

      mm/mempolicy.c: add rcu read lock to protect pid structure

  commit 1e50df39f6e2c3a4a3394df62baa8a213df16c54
  Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
  Date:   Thu Jan 13 15:46:14 2011 -0800

      mempolicy: remove tasklist_lock from migrate_pages

Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Zeng Zhaoming <zengzm.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoepoll: prevent creating circular epoll structures
Davide Libenzi [Fri, 25 Feb 2011 22:44:12 +0000 (14:44 -0800)]
epoll: prevent creating circular epoll structures

In several places, an epoll fd can call another file's ->f_op->poll()
method with ep->mtx held.  This is in general unsafe, because that other
file could itself be an epoll fd that contains the original epoll fd.

The code defends against this possibility in its own ->poll() method using
ep_call_nested, but there are several other unsafe calls to ->poll
elsewhere that can be made to deadlock.  For example, the following simple
program causes the call in ep_insert recursively call the original fd's
->poll, leading to deadlock:

 #include <unistd.h>
 #include <sys/epoll.h>

 int main(void) {
     int e1, e2, p[2];
     struct epoll_event evt = {
         .events = EPOLLIN
     };

     e1 = epoll_create(1);
     e2 = epoll_create(2);
     pipe(p);

     epoll_ctl(e2, EPOLL_CTL_ADD, e1, &evt);
     epoll_ctl(e1, EPOLL_CTL_ADD, p[0], &evt);
     write(p[1], p, sizeof p);
     epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);

     return 0;
 }

On insertion, check whether the inserted file is itself a struct epoll,
and if so, do a recursive walk to detect whether inserting this file would
create a loop of epoll structures, which could lead to deadlock.

[nelhage@ksplice.com: Use epmutex to serialize concurrent inserts]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Reported-by: Nelson Elhage <nelhage@ksplice.com>
Tested-by: Nelson Elhage <nelhage@ksplice.com>
Cc: <stable@kernel.org> [2.6.34+, possibly earlier]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Fri, 25 Feb 2011 22:04:44 +0000 (14:04 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator, mc13xxx: Remove pointless test for unsigned less than zero
  regulator: Fix warning with CONFIG_BUG disabled

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Fri, 25 Feb 2011 22:03:39 +0000 (14:03 -0800)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix fiemap bugs with delalloc
  Btrfs: set FMODE_EXCL in btrfs_device->mode
  Btrfs: make btrfs_rm_device() fail gracefully
  Btrfs: Avoid accessing unmapped kernel address
  Btrfs: Fix BTRFS_IOC_SUBVOL_SETFLAGS ioctl
  Btrfs: allow balance to explicitly allocate chunks as it relocates
  Btrfs: put ENOSPC debugging under a mount option

13 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 25 Feb 2011 22:02:33 +0000 (14:02 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems
  x86/mrst: Fix apb timer rating when lapic timer is used
  x86: Fix reboot problem on VersaLogic Menlow boards

13 years agoRTC: fix typo in drivers/rtc/rtc-at91sam9.c
Jelle Martijn Kok [Fri, 25 Feb 2011 19:13:55 +0000 (11:13 -0800)]
RTC: fix typo in drivers/rtc/rtc-at91sam9.c

The member of the rtc_class_ops struct is called alarm_irq_enable and
not alarm_irq_enabled

CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'patches_for_2.6.38rc' of git://git.pwsan.com/linux-2.6 into devel-fixes
Tony Lindgren [Fri, 25 Feb 2011 20:27:14 +0000 (12:27 -0800)]
Merge branch 'patches_for_2.6.38rc' of git://git.pwsan.com/linux-2.6 into devel-fixes

13 years agoomap4: prcm: Fix the CPUx clockdomain offsets
Santosh Shilimkar [Fri, 4 Feb 2011 09:58:57 +0000 (15:28 +0530)]
omap4: prcm: Fix the CPUx clockdomain offsets

CPU0 and CPU1 clockdomain is at the offset of 0x18 from the LPRM base.
The header file has set it wrongly to 0x0. Offset 0x0 is for CPUx power
domain control register

Fix the same.

The autogen scripts is fixed thanks to Benoit Cousson

With the old value, the clockdomain code would access the
*_PWRSTCTRL.POWERSTATE field when it thought it was accessing the
*_CLKSTCTRL.CLKTRCTRL field.  In the worst case, this could cause
system power management to behave incorrectly.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: added second paragraph to commit message]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
13 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Fri, 25 Feb 2011 19:14:44 +0000 (11:14 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usb: musb: core: set has_tt flag
  USB: xhci: mark local functions as static
  USB: xhci: fix couple sparse annotations
  USB: xhci: rework xhci_print_ir_set() to get ir set from xhci itself
  USB: Reset USB 3.0 devices on (re)discovery
  xhci: Fix an error in count_sg_trbs_needed()
  xhci: Fix errors in the running total calculations in the TRB math
  xhci: Clarify some expressions in the TRB math
  xhci: Avoid BUG() in interrupt context

13 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 25 Feb 2011 19:13:26 +0000 (11:13 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Fix - again - partition detection when array becomes active
  Fix over-zealous flush_disk when changing device size.
  md: avoid spinlock problem in blk_throtl_exit
  md: correctly handle probe of an 'mdp' device.
  md: don't set_capacity before array is active.
  md: Fix raid1->raid0 takeover

13 years agoRxRPC: Allocate tokens with kzalloc to avoid oops in rxrpc_destroy
Anton Blanchard [Fri, 25 Feb 2011 15:33:17 +0000 (15:33 +0000)]
RxRPC: Allocate tokens with kzalloc to avoid oops in rxrpc_destroy

With slab poisoning enabled, I see the following oops:

  Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6b73
  ...
  NIP [c0000000006bc61c] .rxrpc_destroy+0x44/0x104
  LR [c0000000006bc618] .rxrpc_destroy+0x40/0x104
  Call Trace:
  [c0000000feb2bc00] [c0000000006bc618] .rxrpc_destroy+0x40/0x104 (unreliable)
  [c0000000feb2bc90] [c000000000349b2c] .key_cleanup+0x1a8/0x20c
  [c0000000feb2bd40] [c0000000000a2920] .process_one_work+0x2f4/0x4d0
  [c0000000feb2be00] [c0000000000a2d50] .worker_thread+0x254/0x468
  [c0000000feb2bec0] [c0000000000a868c] .kthread+0xbc/0xc8
  [c0000000feb2bf90] [c000000000020e00] .kernel_thread+0x54/0x70

We aren't initialising token->next, but the code in destroy_context relies
on the list being NULL terminated. Use kzalloc to zero out all the fields.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoafs: Fix oops in afs_unlink_writeback
Anton Blanchard [Fri, 25 Feb 2011 15:33:02 +0000 (15:33 +0000)]
afs: Fix oops in afs_unlink_writeback

I'm seeing the following oops when testing afs:

  Unable to handle kernel paging request for data at address 0x00000008
  ...
  NIP [c0000000003393b0] .afs_unlink_writeback+0x38/0xc0
  LR [c00000000033987c] .afs_put_writeback+0x98/0xec
  Call Trace:
  [c00000000345f600] [c00000000033987c] .afs_put_writeback+0x98/0xec
  [c00000000345f690] [c00000000033ae80] .afs_write_begin+0x6a4/0x75c
  [c00000000345f790] [c00000000012b77c] .generic_file_buffered_write+0x148/0x320
  [c00000000345f8d0] [c00000000012e1b8] .__generic_file_aio_write+0x37c/0x3e4
  [c00000000345f9d0] [c00000000012e2a8] .generic_file_aio_write+0x88/0xfc
  [c00000000345fa90] [c0000000003390a8] .afs_file_write+0x10c/0x178
  [c00000000345fb40] [c000000000188788] .do_sync_write+0xc4/0x128
  [c00000000345fcc0] [c000000000189658] .vfs_write+0xe8/0x1d8
  [c00000000345fd70] [c000000000189884] .SyS_write+0x68/0xb0
  [c00000000345fe30] [c000000000008564] syscall_exit+0x0/0x40

afs_write_begin hits an error and calls afs_unlink_writeback. In there
we do list_del_init on an uninitialised list.

The patch below initialises ->link when creating the afs_writeback struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoomap2+: Minimize board specific init_early calls
Tony Lindgren [Thu, 24 Feb 2011 22:36:03 +0000 (14:36 -0800)]
omap2+: Minimize board specific init_early calls

We should only call init_common_infrastructure and
init_common_devices from init_early.

Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP3 Touchbook: fix board initialization
Radek Pilař (Mrkva) [Thu, 24 Feb 2011 18:02:49 +0000 (19:02 +0100)]
OMAP3 Touchbook: fix board initialization

init_early hook runs too early for omap3_mux_init(), so the board
won't boot. Moved to init_machine, then it works just fine.

Signed-off-by: Radek Pilar <mrkva@mrkva.eu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap: rx51: Add SI4713 FM transmitter
Jarkko Nikula [Mon, 21 Feb 2011 06:42:36 +0000 (08:42 +0200)]
omap: rx51: Add SI4713 FM transmitter

Add SI4713 FM transmitter supplies, platform data and setup to RX-51/N900.
It is connected to line output signals of TLV320AIC34 codec A part.
Driver can be either built-in or a module. It can be tuned with v4l2-ctl
from ivtv-utils. Following examples illustrate the use of it:

v4l2-ctl -d /dev/radio0 --set-ctrl=mute=0 (power up)
v4l2-ctl -d /dev/radio0 -f 107900 (tune 107.9 MHz)

v4l2-ctl -d /dev/radio0 --set-ctrl=mute=1 (power down)

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap: Fix compile if MTD_NAND_OMAP2 is not selected
Tony Lindgren [Fri, 25 Feb 2011 18:11:15 +0000 (10:11 -0800)]
omap: Fix compile if MTD_NAND_OMAP2 is not selected

Fix compile if MTD_NAND_OMAP2 is not selected

Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoomap2+: Minimize board specific init_early calls
Tony Lindgren [Thu, 24 Feb 2011 22:36:03 +0000 (14:36 -0800)]
omap2+: Minimize board specific init_early calls

We should only call init_common_infrastructure and
init_common_devices from init_early.

Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agofuse: fix truncate after open
Miklos Szeredi [Fri, 25 Feb 2011 13:44:58 +0000 (14:44 +0100)]
fuse: fix truncate after open

Commit e1181ee6 "vfs: pass struct file to do_truncate on O_TRUNC
opens" broke the behavior of open(O_TRUNC|O_RDONLY) in fuse.  Fuse
assumed that when called from open, a truncate() will be done, not an
ftruncate().

Fix by restoring the old behavior, based on the ATTR_OPEN flag.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
13 years agofuse: fix hang of single threaded fuseblk filesystem
Miklos Szeredi [Fri, 25 Feb 2011 13:44:58 +0000 (14:44 +0100)]
fuse: fix hang of single threaded fuseblk filesystem

Single threaded NTFS-3G could get stuck if a delayed RELEASE reply
triggered a DESTROY request via path_put().

Fix this by

 a) making RELEASE requests synchronous, whenever possible, on fuseblk
 filesystems

 b) if not possible (triggered by an asynchronous read/write) then do
 the path_put() in a separate thread with schedule_work().

Reported-by: Oliver Neukum <oneukum@suse.de>
Cc: stable@kernel.org
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
13 years agoeukrea-tlv320: fix platform_name
Eric Bénard [Fri, 25 Feb 2011 12:47:46 +0000 (13:47 +0100)]
eukrea-tlv320: fix platform_name

commit f0fba2ad1b6b53d5360125c41953b7afcd6deff0 included a mistake
on the name of the platform in the snd_soc_dai_link structure.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
13 years agoASoC: correct pxa AC97 DAI names
Dmitry Eremin-Solenikov [Tue, 22 Feb 2011 23:29:11 +0000 (02:29 +0300)]
ASoC: correct pxa AC97 DAI names

Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix
that for all PXA platforms.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
13 years agoperf hists: Print number of samples, not the period sum
Arnaldo Carvalho de Melo [Thu, 17 Feb 2011 12:37:23 +0000 (10:37 -0200)]
perf hists: Print number of samples, not the period sum

So that we match the header where we state the number of events with the
"Samples" column when using 'perf report -n/--show-nr-samples':

 [root@emilia ~]# perf record -a sleep 1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ]
 [root@emilia ~]# perf report --stdio --show-nr-samples
 # Events: 11  cycles
 #
 # Overhead  Samples        Command       Shared Object                        Symbol
 # ........ ..........  ...........  ..................  ............................
 #
     16.65%          1        sleep  [kernel.kallsyms]   [k] unmap_vmas
     16.10%          1         perf  libpthread-2.12.so  [.] __pthread_cleanup_push_defer
     15.79%          2         perf  [kernel.kallsyms]   [k] format_decode
     12.88%          1  kworker/1:2  [kernel.kallsyms]   [k] cache_reap
     10.69%          1      swapper  [kernel.kallsyms]   [k] _raw_spin_lock
      7.55%          1        sleep  [kernel.kallsyms]   [k] prepare_exec_creds
      6.00%          1         perf  [jbd2]              [k] start_this_handle
      5.29%          1         perf  [kernel.kallsyms]   [k] seq_read
      4.75%          1         perf  [kernel.kallsyms]   [k] get_pid_task
      4.30%          1         perf  [kernel.kallsyms]   [k] _raw_spin_unlock_irqrestore

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [root@emilia ~]#

Reported-by: Stephane Eranian <eranian@google.com>
Reported-by: Cliff Wickman <cpw@sgi.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[ cherry-picked it from perf/core, as it has been reported by others as well. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoregulator, mc13xxx: Remove pointless test for unsigned less than zero
Jesper Juhl [Wed, 23 Feb 2011 22:45:55 +0000 (23:45 +0100)]
regulator, mc13xxx: Remove pointless test for unsigned less than zero

The variable 'val' is a 'unsigned int', so it can never be less than zero.
This fact makes the "val < 0" part of the test done in BUG_ON() in
mc13xxx_regulator_get_voltage() rather pointles since it can never have
any effect.
This patch removes the pointless test.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
13 years agoregulator: Fix warning with CONFIG_BUG disabled
Mark Brown [Wed, 2 Feb 2011 20:17:22 +0000 (20:17 +0000)]
regulator: Fix warning with CONFIG_BUG disabled

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
13 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 25 Feb 2011 01:08:48 +0000 (17:08 -0800)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

13 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle...
Dave Airlie [Thu, 24 Feb 2011 22:40:26 +0000 (08:40 +1000)]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6

13 years agoomap: IOMMU: add support to callback during fault handling
David Cohen [Wed, 16 Feb 2011 19:35:51 +0000 (19:35 +0000)]
omap: IOMMU: add support to callback during fault handling

Add support to register an isr for IOMMU fault situations and adapt it
to allow such (*isr)() to be used as fault callback. Drivers using IOMMU
module might want to be informed when errors happen in order to debug it
or react.

Signed-off-by: David Cohen <dacohen@gmail.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP2+: IOMMU: don't print fault warning on specific layer
David Cohen [Wed, 16 Feb 2011 19:35:50 +0000 (19:35 +0000)]
OMAP2+: IOMMU: don't print fault warning on specific layer

IOMMU upper layer and user are responsible to handle a fault and to
define whether it will end up as an error or not. OMAP2+ specific
layer should not print anything in such case.

Signed-off-by: David Cohen <dacohen@gmail.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP: hwmod: Removal of macros for data that is obtained from hwmod database
Kishon Vijay Abraham I [Thu, 24 Feb 2011 09:46:57 +0000 (15:16 +0530)]
OMAP: hwmod: Removal of macros for data that is obtained from hwmod database

Information like base address and DMA channel nubers should no longer
be obtained using macros. These information should be obtained from
hwmod database. Hence the macros that define the base address are removed.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Charulatha V <charu@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoASoC: McBSP: get hw params from McBSP driver
Kishon Vijay Abraham I [Thu, 24 Feb 2011 09:46:56 +0000 (15:16 +0530)]
ASoC: McBSP: get hw params from McBSP driver

Removed the use of macros to obtain base address and DMA channel number.
Instead use the McBSP driver API's that passes base address and DMA
channel number to the client driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers
Kishon Vijay Abraham I [Thu, 24 Feb 2011 09:46:55 +0000 (15:16 +0530)]
OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers

After McBSP driver is hwmod adapted, the information about the hw would be
obtained from the hwmod database by the mcbsp driver. Since DMA programming is
handled by the client driver, APIs are provided to pass the DMA channel number
and base address of data register required by the client driver for DMA
programming.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Charulatha V <charu@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP: McBSP: Add pm runtime support
Kishon Vijay Abraham I [Thu, 24 Feb 2011 09:46:54 +0000 (15:16 +0530)]
OMAP: McBSP: Add pm runtime support

Add pm runtime support for McBSP driver.
Reference to fclk is not removed because it is required when the
functional clock is switched from one source to another.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP: McBSP: use omap_device APIs to modify SYSCONFIG
Kishon Vijay Abraham I [Thu, 24 Feb 2011 09:46:53 +0000 (15:16 +0530)]
OMAP: McBSP: use omap_device APIs to modify SYSCONFIG

McBSP2/3 in OMAP3 has sidetone feature which requires autoidle
to be disabled before starting the sidetone. Also SYSCONFIG
register has to be set with smart idle or no idle depending on the
dma op mode (threshold or element sync). For doing these operations
dynamically at runtime, omap_device APIs are used to modify SYSCONFIG register.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[tony@atomide.com: updated to compile without omap_device idle calls]
Signed-off-by: Tony Lindgren <tony@atomide.com>
13 years agoOMAP2+: McBSP: hwmod adaptation for McBSP
Kishon Vijay Abraham I [Thu, 24 Feb 2011 09:46:52 +0000 (15:16 +0530)]
OMAP2+: McBSP: hwmod adaptation for McBSP

Modify OMAP2+ McBSP to use omap hwmod framework APIs

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>