Guoqing Jiang [Sat, 4 Apr 2020 21:57:09 +0000 (23:57 +0200)]
md: don't flush workqueue unconditionally in md_open
[ Upstream commit
f6766ff6afff70e2aaf39e1511e16d471de7c3ae ]
We need to check mddev->del_work before flush workqueu since the purpose
of flush is to ensure the previous md is disappeared. Otherwise the similar
deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the
bdev->bd_mutex before flush workqueue.
kernel: [ 154.522645] ======================================================
kernel: [ 154.522647] WARNING: possible circular locking dependency detected
kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O
kernel: [ 154.522651] ------------------------------------------------------
kernel: [ 154.522653] mdadm/2482 is trying to acquire lock:
kernel: [ 154.522655]
ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0
kernel: [ 154.522673]
kernel: [ 154.522673] but task is already holding lock:
kernel: [ 154.522675]
ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [ 154.522691]
kernel: [ 154.522691] which lock already depends on the new lock.
kernel: [ 154.522691]
kernel: [ 154.522694]
kernel: [ 154.522694] the existing dependency chain (in reverse order) is:
kernel: [ 154.522696]
kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}:
kernel: [ 154.522704] __mutex_lock+0x87/0x950
kernel: [ 154.522706] __blkdev_get+0x79/0x590
kernel: [ 154.522708] blkdev_get+0x65/0x140
kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40
kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod]
kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod]
kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod]
kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod]
kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0
kernel: [ 154.522735] vfs_write+0xad/0x1a0
kernel: [ 154.522737] ksys_write+0xa4/0xe0
kernel: [ 154.522745] do_syscall_64+0x64/0x2b0
kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522749]
kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}:
kernel: [ 154.522752] __mutex_lock+0x87/0x950
kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod]
kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod]
kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0
kernel: [ 154.522763] vfs_write+0xad/0x1a0
kernel: [ 154.522765] ksys_write+0xa4/0xe0
kernel: [ 154.522767] do_syscall_64+0x64/0x2b0
kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522770]
kernel: [ 154.522770] -> #2 (kn->count#253){++++}:
kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0
kernel: [ 154.522778] kernfs_remove+0x1f/0x30
kernel: [ 154.522780] kobject_del+0x28/0x60
kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod]
kernel: [ 154.522786] process_one_work+0x2a7/0x5f0
kernel: [ 154.522788] worker_thread+0x2d/0x3d0
kernel: [ 154.522793] kthread+0x117/0x130
kernel: [ 154.522795] ret_from_fork+0x3a/0x50
kernel: [ 154.522796]
kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}:
kernel: [ 154.522800] process_one_work+0x27e/0x5f0
kernel: [ 154.522802] worker_thread+0x2d/0x3d0
kernel: [ 154.522804] kthread+0x117/0x130
kernel: [ 154.522806] ret_from_fork+0x3a/0x50
kernel: [ 154.522807]
kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}:
kernel: [ 154.522813] __lock_acquire+0x1392/0x1690
kernel: [ 154.522816] lock_acquire+0xb4/0x1a0
kernel: [ 154.522818] flush_workqueue+0xab/0x4b0
kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522823] __blkdev_get+0xea/0x590
kernel: [ 154.522825] blkdev_get+0x65/0x140
kernel: [ 154.522828] do_dentry_open+0x1d1/0x380
kernel: [ 154.522831] path_openat+0x567/0xcc0
kernel: [ 154.522834] do_filp_open+0x9b/0x110
kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0
kernel: [ 154.522838] do_sys_open+0x57/0x80
kernel: [ 154.522840] do_syscall_64+0x64/0x2b0
kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522844]
kernel: [ 154.522844] other info that might help us debug this:
kernel: [ 154.522844]
kernel: [ 154.522846] Chain exists of:
kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex
kernel: [ 154.522846]
kernel: [ 154.522850] Possible unsafe locking scenario:
kernel: [ 154.522850]
kernel: [ 154.522852] CPU0 CPU1
kernel: [ 154.522853] ---- ----
kernel: [ 154.522854] lock(&bdev->bd_mutex);
kernel: [ 154.522856] lock(&mddev->reconfig_mutex);
kernel: [ 154.522858] lock(&bdev->bd_mutex);
kernel: [ 154.522860] lock((wq_completion)md_misc);
kernel: [ 154.522861]
kernel: [ 154.522861] *** DEADLOCK ***
kernel: [ 154.522861]
kernel: [ 154.522864] 1 lock held by mdadm/2482:
kernel: [ 154.522865] #0:
ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [ 154.522868]
kernel: [ 154.522868] stack backtrace:
kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25
kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
kernel: [ 154.522878] Call Trace:
kernel: [ 154.522881] dump_stack+0x8f/0xcb
kernel: [ 154.522884] check_noncircular+0x194/0x1b0
kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690
kernel: [ 154.522890] __lock_acquire+0x1392/0x1690
kernel: [ 154.522893] lock_acquire+0xb4/0x1a0
kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0
kernel: [ 154.522898] flush_workqueue+0xab/0x4b0
kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0
kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522910] __blkdev_get+0xea/0x590
kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0
kernel: [ 154.522914] blkdev_get+0x65/0x140
kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0
kernel: [ 154.522918] do_dentry_open+0x1d1/0x380
kernel: [ 154.522921] path_openat+0x567/0xcc0
kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690
kernel: [ 154.522926] do_filp_open+0x9b/0x110
kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0
kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630
kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0
kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0
kernel: [ 154.522944] do_sys_open+0x57/0x80
kernel: [ 154.522946] do_syscall_64+0x64/0x2b0
kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae
And md_alloc also flushed the same workqueue, but the thing is different
here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and
the flush is necessary to avoid race condition, so leave it as it is.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryder Lee [Fri, 24 Apr 2020 19:32:22 +0000 (03:32 +0800)]
mt76: avoid rx reorder buffer overflow
[ Upstream commit
7c4f744d6703757be959f521a7a441bf34745d99 ]
Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)
Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Thu, 30 Apr 2020 07:31:45 +0000 (07:31 +0000)]
drm/mcde: dsi: Fix return value check in mcde_dsi_bind()
[ Upstream commit
761e9f4f80a21a4b845097027030bef863001636 ]
The of_drm_find_bridge() function returns NULL on error, it doesn't return
error pointers so this check doesn't work.
Fixes:
5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430073145.52321-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bhupesh Sharma [Mon, 11 May 2020 10:11:41 +0000 (15:41 +0530)]
net: qed*: Reduce RX and TX default ring count when running inside kdump kernel
[ Upstream commit
73e030977f7884dbe1be0018bab517e8d02760f8 ]
Normally kdump kernel(s) run under severe memory constraint with the
basic idea being to save the crashdump vmcore reliably when the primary
kernel panics/hangs.
Currently the qed* ethernet driver ends up consuming a lot of memory in
the kdump kernel, leading to kdump kernel panic when one tries to save
the vmcore via ssh/nfs (thus utilizing the services of the underlying
qed* network interfaces).
An example OOM message log seen in the kdump kernel can be seen here
[1], with crashkernel size reservation of 512M.
Using tools like memstrack (see [2]), we can track the modules taking up
the bulk of memory in the kdump kernel and organize the memory usage
output as per 'highest allocator first'. An example log for the OOM case
indicates that the qed* modules end up allocating approximately 216M
memory, which is a large part of the total crashkernel size:
dracut-pre-pivot[676]: ======== Report format module_summary: ========
dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages)
dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages)
This patch reduces the default RX and TX ring count from 1024 to 64
when running inside kdump kernel, which leads to a significant memory
saving.
An example log with the patch applied shows the reduced memory
allocation in the kdump kernel:
dracut-pre-pivot[674]: ======== Report format module_summary: ========
dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages)
<..snip..>
[dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages)
Tested crashdump vmcore save via ssh/nfs protocol using underlying qed*
network interface after applying this patch.
[1] OOM log:
------------
kworker/0:6: page allocation failure: order:6,
mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
kworker/0:6 cpuset=/ mems_allowed=0
CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1
Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025
01/18/2019
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace+0x0/0x188
show_stack+0x24/0x30
dump_stack+0x90/0xb4
warn_alloc+0xf4/0x178
__alloc_pages_nodemask+0xcac/0xd58
alloc_pages_current+0x8c/0xf8
kmalloc_order_trace+0x38/0x108
qed_iov_alloc+0x40/0x248 [qed]
qed_resc_alloc+0x224/0x518 [qed]
qed_slowpath_start+0x254/0x928 [qed]
__qede_probe+0xf8/0x5e0 [qede]
qede_probe+0x68/0xd8 [qede]
local_pci_probe+0x44/0xa8
work_for_cpu_fn+0x20/0x30
process_one_work+0x1ac/0x3e8
worker_thread+0x44/0x448
kthread+0x130/0x138
ret_from_fork+0x10/0x18
Cannot start slowpath
qede: probe of 0000:05:00.1 failed with error -12
[2]. Memstrack tool: https://github.com/ryncsn/memstrack
Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: Manish Chopra <manishc@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Fri, 8 May 2020 02:56:03 +0000 (05:56 +0300)]
wcn36xx: Fix error handling path in 'wcn36xx_probe()'
[ Upstream commit
a86308fc534edeceaf64670c691e17485436a4f4 ]
In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to
'rpmsg_destroy_ept()', as already done in the remove function.
Fixes:
5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rakesh Pillai [Fri, 8 May 2020 02:55:18 +0000 (05:55 +0300)]
ath10k: Remove msdu from idr when management pkt send fails
[ Upstream commit
c730c477176ad4af86d9aae4d360a7ad840b073a ]
Currently when the sending of any management pkt
via wmi command fails, the packet is being unmapped
freed in the error handling. But the idr entry added,
which is used to track these packet is not getting removed.
Hence, during unload, in wmi cleanup, all the entries
in IDR are removed and the corresponding buffer is
attempted to be freed. This can cause a situation where
one packet is attempted to be freed twice.
Fix this error by rmeoving the msdu from the idr
list when the sending of a management packet over
wmi fails.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Fixes:
1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Thu, 30 Apr 2020 20:59:32 +0000 (13:59 -0700)]
nvme-tcp: use bh_lock in data_ready
[ Upstream commit
386e5e6e1aa90b479fcf0467935922df8524393d ]
data_ready may be invoked from send context or from
softirq, so need bh locking for that.
Fixes:
3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Weiping Zhang [Sat, 2 May 2020 07:29:41 +0000 (15:29 +0800)]
nvme-pci: align io queue count with allocted nvme_queue in nvme_probe
[ Upstream commit
2a5bcfdd41d68559567cec3c124a75e093506cc1 ]
Since commit
147b27e4bd08 ("nvme-pci: allocate device queues storage
space at probe"), nvme_alloc_queue does not alloc the nvme queues
itself anymore.
If the write/poll_queues module parameters are changed at runtime to
values larger than the number of allocated queues in nvme_probe,
nvme_alloc_queue will access unallocated memory.
Add a new nr_allocated_queues member to struct nvme_dev to record how
many queues were alloctated in nvme_probe to avoid using more than the
allocated queues after a reset following a change to the
write/poll_queues module parameters.
Also add nr_write_queues and nr_poll_queues members to allow refreshing
the number of write and poll queues based on a change to the module
parameters when resetting the controller.
Fixes:
147b27e4bd08 ("nvme-pci: allocate device queues storage space at probe")
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
[hch: add nvme_max_io_queues, update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Sat, 4 Apr 2020 08:11:28 +0000 (10:11 +0200)]
nvme: refine the Qemu Identify CNS quirk
[ Upstream commit
b9a5c3d4c34d8bd9fd75f7f28d18a57cb68da237 ]
Add a helper to check if we can use Identify CNS values > 1, and refine
the Qemu quirk to not apply to reported versions larger than 1.1, as the
Qemu implementation had been fixed by then.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mordechay Goodstein [Fri, 24 Apr 2020 15:48:15 +0000 (18:48 +0300)]
iwlwifi: avoid debug max amsdu config overwriting itself
[ Upstream commit
a65a5824298b06049dbaceb8a9bd19709dc9507c ]
If we set amsdu_len one after another the second one overwrites
the orig_amsdu_len so allow only moving from debug to non debug state.
Also the TLC update check was wrong: it was checking that also the orig
is smaller then the new updated size, which is not the case in debug
amsdu mode.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Fixes:
af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424182644.e565446a4fce.I9729d8c520d8b8bb4de9a5cdc62e01eb85168aac@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 2 May 2020 18:29:50 +0000 (20:29 +0200)]
platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types
[ Upstream commit
1fac39fd0316b19c3e57a182524332332d1643ce ]
Commit
de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops.
Some devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report if they are in tablet mode (keyboard detached) or not,
report 32 / "Detachable" as chassis-type, e.g. the HP Pavilion X2 series.
Other devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report SW_TABLET_MODE, report 8 / "Portable" as chassis-type.
The Dell Venue 11 Pro 7130 is an example of this.
Extend the DMI chassis-type check to also accept Portables and Detachables
so that the intel-vbtn driver will report SW_TABLET_MODE on these devices.
Note the chassis-type check was originally added to avoid a false-positive
tablet-mode report on the Dell XPS 9360 laptop. To the best of my knowledge
that laptop is using a chassis-type of 9 / "Laptop", so after this commit
we still ignore the tablet-switch for that chassis-type.
Fixes:
de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 2 May 2020 18:29:49 +0000 (20:29 +0200)]
platform/x86: intel-vbtn: Do not advertise switches to userspace if they are not there
[ Upstream commit
990fbb48067bf8cfa34b7d1e6e1674eaaef2f450 ]
Commit
de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops (specifically on the
Dell XPS 9360), to avoid e.g. userspace ignoring touchpad events because
userspace thought the device was in tablet-mode.
But if we are not getting the initial status of the switch because the
device does not have a tablet mode, then we really should not advertise
the presence of a tablet-mode switch to userspace at all, as userspace may
use the mere presence of this switch for certain heuristics.
Fixes:
de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 2 May 2020 18:29:48 +0000 (20:29 +0200)]
platform/x86: intel-vbtn: Split keymap into buttons and switches parts
[ Upstream commit
f6ba524970c4b73b234bf41ecd6628f5803b1559 ]
Split the sparse keymap into 2 separate keymaps, a buttons and a switches
keymap and combine the 2 to a single map again in intel_vbtn_input_setup().
This is a preparation patch for not telling userspace that we have switches
when we do not have them (and for doing the same for the buttons).
Fixes:
de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 2 May 2020 18:29:47 +0000 (20:29 +0200)]
platform/x86: intel-vbtn: Use acpi_evaluate_integer()
[ Upstream commit
18937875a231d831c309716d6d8fc358f8381881 ]
Use acpi_evaluate_integer() instead of open-coding it.
This is a preparation patch for adding a intel_vbtn_has_switches()
helper function.
Fixes:
de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Foster [Wed, 6 May 2020 20:25:22 +0000 (13:25 -0700)]
xfs: fix duplicate verification from xfs_qm_dqflush()
[ Upstream commit
629dcb38dc351947ed6a26a997d4b587f3bd5c7e ]
The pre-flush dquot verification in xfs_qm_dqflush() duplicates the
read verifier by checking the dquot in the on-disk buffer. Instead,
verify the in-core variant before it is flushed to the buffer.
Fixes:
7224fa482a6d ("xfs: add full xfs_dqblk verifier")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Foster [Wed, 6 May 2020 20:25:20 +0000 (13:25 -0700)]
xfs: reset buffer write failure state on successful completion
[ Upstream commit
b6983e80b03bd4fd42de71993b3ac7403edac758 ]
The buffer write failure flag is intended to control the internal
write retry that XFS has historically implemented to help mitigate
the severity of transient I/O errors. The flag is set when a buffer
is resubmitted from the I/O completion path due to a previous
failure. It is checked on subsequent I/O completions to skip the
internal retry and fall through to the higher level configurable
error handling mechanism. The flag is cleared in the synchronous and
delwri submission paths and also checked in various places to log
write failure messages.
There are a couple minor problems with the current usage of this
flag. One is that we issue an internal retry after every submission
from xfsaild due to how delwri submission clears the flag. This
results in double the expected or configured number of write
attempts when under sustained failures. Another more subtle issue is
that the flag is never cleared on successful I/O completion. This
can cause xfs_wait_buftarg() to suggest that dirty buffers are being
thrown away due to the existence of the flag, when the reality is
that the flag might still be set because the write succeeded on the
retry.
Clear the write failure flag on successful I/O completion to address
both of these problems. This means that the internal retry attempt
occurs once since the last time a buffer write failed and that
various other contexts only see the flag set when the immediately
previous write attempt has failed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Thompson [Wed, 6 May 2020 16:42:23 +0000 (17:42 +0100)]
kgdb: Fix spurious true from in_dbg_master()
[ Upstream commit
3fec4aecb311995189217e64d725cfe84a568de3 ]
Currently there is a small window where a badly timed migration could
cause in_dbg_master() to spuriously return true. Specifically if we
migrate to a new core after reading the processor id and the previous
core takes a breakpoint then we will evaluate true if we read
kgdb_active before we get the IPI to bring us to halt.
Fix this by checking irqs_disabled() first. Interrupts are always
disabled when we are executing the kgdb trap so this is an acceptable
prerequisite. This also allows us to replace raw_smp_processor_id()
with smp_processor_id() since the short circuit logic will prevent
warnings from PREEMPT_DEBUG.
Fixes:
dcc7871128e9 ("kgdb: core changes to support kdb")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200506164223.2875760-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Serge Semin [Wed, 6 May 2020 17:42:22 +0000 (20:42 +0300)]
mips: cm: Fix an invalid error code of INTVN_*_ERR
[ Upstream commit
8a0efb8b101665a843205eab3d67ab09cb2d9a8d ]
Commit
3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.
Fixes:
3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiaxun Yang [Wed, 6 May 2020 05:52:45 +0000 (13:52 +0800)]
MIPS: Truncate link address into 32bit for 32bit kernel
[ Upstream commit
ff487d41036035376e47972c7c522490b839ab37 ]
LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Devulapally Shiva Krishna [Tue, 5 May 2020 03:12:55 +0000 (08:42 +0530)]
Crypto/chcr: fix for ccm(aes) failed test
[ Upstream commit
10b0c75d7bc19606fa9a62c8ab9180e95c0e0385 ]
The ccm(aes) test fails when req->assoclen > ~240bytes.
The problem is the value assigned to auth_offset is wrong.
As auth_offset is unsigned char, it can take max value as 255.
So fix it by making it unsigned int.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Darrick J. Wong [Mon, 4 May 2020 21:06:27 +0000 (14:06 -0700)]
xfs: clean up the error handling in xfs_swap_extents
[ Upstream commit
8bc3b5e4b70d28f8edcafc3c9e4de515998eea9e ]
Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.
Fixes:
96987eea537d6c ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Fri, 1 May 2020 17:39:00 +0000 (18:39 +0100)]
libertas_tf: avoid a null dereference in pointer priv
[ Upstream commit
049ceac308b0d57c4f06b9fb957cdf95d315cf0b ]
Currently there is a check if priv is null when calling lbtf_remove_card
but not in a previous call to if_usb_reset_dev that can also dereference
priv. Fix this by also only calling lbtf_remove_card if priv is null.
It is noteable that there don't seem to be any bugs reported that the
null pointer dereference has ever occurred, so I'm not sure if the null
check is required, but since we're doing a null check anyway it should
be done for both function calls.
Addresses-Coverity: ("Dereference before null check")
Fixes:
baa0280f08c7 ("libertas_tf: don't defer firmware loading until start()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200501173900.296658-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Kerr [Tue, 5 May 2020 10:12:50 +0000 (12:12 +0200)]
powerpc/spufs: fix copy_to_user while atomic
[ Upstream commit
88413a6bfbbe2f648df399b62f85c934460b7a4d ]
Currently, we may perform a copy_to_user (through
simple_read_from_buffer()) while holding a context's register_lock,
while accessing the context save area.
This change uses a temporary buffer for the context save area data,
which we then pass to simple_read_from_buffer.
Includes changes from Christoph Hellwig <hch@lst.de>.
Fixes:
bf1ab978be23 ("[POWERPC] coredump: Add SPU elf notes to coredump.")
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[hch: renamed to function to avoid ___-prefixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yunjian Wang [Tue, 5 May 2020 02:49:20 +0000 (10:49 +0800)]
net: allwinner: Fix use correct return type for ndo_start_xmit()
[ Upstream commit
09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type. And emac_start_xmit() can
leak one skb if 'channel' == 3.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 5 May 2020 08:25:56 +0000 (10:25 +0200)]
media: cec: silence shift wrapping warning in __cec_s_log_addrs()
[ Upstream commit
3b5af3171e2d5a73ae6f04965ed653d039904eb6 ]
The log_addrs->log_addr_type[i] value is a u8 which is controlled by
the user and comes from the ioctl. If it's over 31 then that results in
undefined behavior (shift wrapping) and that leads to a Smatch static
checker warning. We already cap the value later so we can silence the
warning just by re-ordering the existing checks.
I think the UBSan checker will also catch this bug at runtime and
generate a warning. But otherwise the bug is harmless.
Fixes:
9881fe0ca187 ("[media] cec: add HDMI CEC framework (adapter)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Wed, 29 Apr 2020 02:52:20 +0000 (02:52 +0000)]
drivers: net: davinci_mdio: fix potential NULL dereference in davinci_mdio_probe()
[ Upstream commit
e00edb4efbbc07425441a3be2aa87abaf5800d96 ]
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
since devm_ioremap() does not check input parameters for null.
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Fixes:
03f66f067560 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Wed, 29 Apr 2020 07:30:53 +0000 (07:30 +0000)]
selinux: fix error return code in policydb_read()
[ Upstream commit
4c09f8b6913a779ca0c70ea8058bf21537eebb3b ]
Fix to return negative error code -ENOMEM from the kvcalloc() error
handling case instead of 0, as done elsewhere in this function.
Fixes:
acdf52d97f82 ("selinux: convert to kvmalloc")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Mon, 27 Apr 2020 12:15:07 +0000 (12:15 +0000)]
net: lpc-enet: fix error return code in lpc_mii_init()
[ Upstream commit
88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejun Heo [Mon, 13 Apr 2020 16:27:58 +0000 (12:27 -0400)]
iocost_monitor: drop string wrap around numbers when outputting json
[ Upstream commit
21f3cfeab304fc07b90d93d98d4d2f62110fe6b2 ]
Wrapping numbers in strings is used by some to work around bit-width issues in
some enviroments. The problem isn't innate to json and the workaround seems to
cause more integration problems than help. Let's drop the string wrapping.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shaokun Zhang [Thu, 23 Apr 2020 12:05:30 +0000 (20:05 +0800)]
drivers/perf: hisi: Fix typo in events attribute array
[ Upstream commit
88562f06ebf56587788783e5420f25fde3ca36c8 ]
Fix up one typo: wr_dr_64b -> wr_ddr_64b.
Fixes:
2bab3cf9104c ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Wed, 1 Apr 2020 21:40:33 +0000 (17:40 -0400)]
sched/core: Fix illegal RCU from offline CPUs
[ Upstream commit
bf2c59fce4074e55d622089b34be3a6bc95484fb ]
In the CPU-offline process, it calls mmdrop() after idle entry and the
subsequent call to cpuhp_report_idle_dead(). Once execution passes the
call to rcu_report_dead(), RCU is ignoring the CPU, which results in
lockdep complaining when mmdrop() uses RCU from either memcg or
debugobjects below.
Fix it by cleaning up the active_mm state from BP instead. Every arch
which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit()
from AP. The only exception is parisc because it switches them to
&init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()),
but the patch will still work there because it calls mmgrab(&init_mm) in
smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().
WARNING: suspicious RCU usage
-----------------------------
kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!
other info that might help us debug this:
RCU used illegally from offline CPU!
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
lockdep_rcu_suspicious+0x140/0x164
get_work_pool+0x110/0x150
__queue_work+0x1bc/0xca0
queue_work_on+0x114/0x120
css_release+0x9c/0xc0
percpu_ref_put_many+0x204/0x230
free_pcp_prepare+0x264/0x570
free_unref_page+0x38/0xf0
__mmdrop+0x21c/0x2c0
idle_task_exit+0x170/0x1b0
pnv_smp_cpu_kill_self+0x38/0x2e0
cpu_die+0x48/0x64
arch_cpu_idle_dead+0x30/0x50
do_idle+0x2f4/0x470
cpu_startup_entry+0x38/0x40
start_secondary+0x7a8/0xa80
start_secondary_resume+0x10/0x14
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jann Horn [Thu, 5 Mar 2020 22:06:57 +0000 (23:06 +0100)]
exit: Move preemption fixup up, move blocking operations down
[ Upstream commit
586b58cac8b4683eb58a1446fbc399de18974e40 ]
With CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_CGROUPS=y, kernel oopses in
non-preemptible context look untidy; after the main oops, the kernel prints
a "sleeping function called from invalid context" report because
exit_signals() -> cgroup_threadgroup_change_begin() -> percpu_down_read()
can sleep, and that happens before the preempt_count_set(PREEMPT_ENABLED)
fixup.
It looks like the same thing applies to profile_task_exit() and
kcov_task_exit().
Fix it by moving the preemption fixup up and the calls to
profile_task_exit() and kcov_task_exit() down.
Fixes:
1dc0fffc48af ("sched/core: Robustify preemption leak checks")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200305220657.46800-1-jannh@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Tue, 21 Apr 2020 21:47:04 +0000 (14:47 -0700)]
lib/mpi: Fix 64-bit MIPS build with Clang
[ Upstream commit
18f1ca46858eac22437819937ae44aa9a8f9f2fa ]
When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and
CONFIG_CRYPTO_RSA enabled:
lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm'
: "=d" ((UDItype)(w0))
~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm'
: "=d" ((UDItype)(w1))
~~~~~~~~~~^~~
2 errors generated.
This special case for umul_ppmm for MIPS64r6 was added in
commit
bbc25bee37d2b ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to
GCC being inefficient and emitting a __multi3 intrinsic.
There is no such issue with clang; with this patch applied, I can build
this configuration without any problems and there are no link errors
like mentioned in the commit above (which I can still reproduce with
GCC 9.3.0 when that commit is reverted). Only use this definition when
GCC is being used.
This really should have been caught by commit
b0c091ae04f67 ("lib/mpi:
Eliminate unused umul_ppmm definitions for MIPS") when I was messing
around in this area but I was not testing 64-bit MIPS at the time.
Link: https://github.com/ClangBuiltLinux/linux/issues/885
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Wed, 29 Apr 2020 20:02:01 +0000 (13:02 -0700)]
net: bcmgenet: Fix WoL with password after deep sleep
[ Upstream commit
6f7689057a0f10a6c967b9f2759d7a3dc948b930 ]
Broadcom STB chips support a deep sleep mode where all register contents
are lost. Because we were stashing the MagicPacket password into some of
these registers a suspend into that deep sleep then a resumption would
not lead to being able to wake-up from MagicPacket with password again.
Fix this by keeping a software copy of the password and program it
during suspend.
Fixes:
c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Wed, 29 Apr 2020 20:02:00 +0000 (13:02 -0700)]
net: bcmgenet: set Rx mode before starting netif
[ Upstream commit
72f96347628e73dbb61b307f18dd19293cc6792a ]
This commit explicitly calls the bcmgenet_set_rx_mode() function when
the network interface is started. This function is normally called by
ndo_set_rx_mode when the flags are changed, but apparently not when
the driver is suspended and resumed.
This change ensures that address filtering or promiscuous mode are
properly restored by the driver after the MAC may have been reset.
Fixes:
b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Wed, 29 Apr 2020 01:21:06 +0000 (18:21 -0700)]
selftests/bpf: Fix memory leak in extract_build_id()
[ Upstream commit
9f56bb531a809ecaa7f0ddca61d2cf3adc1cb81a ]
getline() allocates string, which has to be freed.
Fixes:
81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Fri, 24 Apr 2020 19:55:34 +0000 (21:55 +0200)]
netfilter: nft_nat: return EOPNOTSUPP if type or flags are not supported
[ Upstream commit
0d7c83463fdf7841350f37960a7abadd3e650b41 ]
Instead of EINVAL which should be used for malformed netlink messages.
Fixes:
eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jesper Dangaard Brouer [Thu, 23 Apr 2020 14:57:50 +0000 (16:57 +0200)]
dpaa2-eth: fix return codes used in ndo_setup_tc
[ Upstream commit
b89c1e6bdc73f5775e118eb2ab778e75b262b30c ]
Drivers ndo_setup_tc call should return -EOPNOTSUPP, when it cannot
support the qdisc type. Other return values will result in failing the
qdisc setup. This lead to qdisc noop getting assigned, which will
drop all TX packets on the interface.
Fixes:
ab1e6de2bd49 ("dpaa2-eth: Add mqprio support")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Parri (Microsoft) [Mon, 6 Apr 2020 00:15:04 +0000 (02:15 +0200)]
Drivers: hv: vmbus: Always handle the VMBus messages on CPU0
[ Upstream commit
8a857c55420f29da4fc131adc22b12d474c48f4c ]
A Linux guest have to pick a "connect CPU" to communicate with the
Hyper-V host. This CPU can not be taken offline because Hyper-V does
not provide a way to change that CPU assignment.
Current code sets the connect CPU to whatever CPU ends up running the
function vmbus_negotiate_version(), and this will generate problems if
that CPU is taken offine.
Establish CPU0 as the connect CPU, and add logics to prevents the
connect CPU from being taken offline. We could pick some other CPU,
and we could pick that "other CPU" dynamically if there was a reason to
do so at some point in the future. But for now, #defining the connect
CPU to 0 is the most straightforward and least complex solution.
While on this, add inline comments explaining "why" offer and rescind
messages should not be handled by a same serialized work queue.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20200406001514.19876-2-parri.andrea@gmail.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Moore [Tue, 21 Apr 2020 13:10:56 +0000 (09:10 -0400)]
audit: fix a net reference leak in audit_list_rules_send()
[ Upstream commit
3054d06719079388a543de6adb812638675ad8f5 ]
If audit_list_rules_send() fails when trying to create a new thread
to send the rules it also fails to cleanup properly, leaking a
reference to a net structure. This patch fixes the error patch and
renames audit_send_list() to audit_send_list_thread() to better
match its cousin, audit_send_reply_thread().
Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Fri, 17 Apr 2020 17:15:32 +0000 (19:15 +0200)]
Bluetooth: btbcm: Add 2 missing models to subver tables
[ Upstream commit
c03ee9af4e07112bd3fc688daca9e654f41eca93 ]
Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries
for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just
"BCM" as prefix for the filename to pass to request-firmware, making it
harder for users to figure out which firmware they need. This especially
is problematic with the UART attached BCM4324B5 where this leads to the
filename being just "BCM.hcd".
Add the 2 missing devices to subver tables. This has been tested on:
1. A Dell XPS15 9550 where this makes btbcm.c try to load
"BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd".
2. A Thinkpad 8 where this makes btbcm.c try to load
"BCM4324B5.hcd" before it tries to load "BCM.hcd"
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Gong [Tue, 21 Apr 2020 12:09:35 +0000 (15:09 +0300)]
ath10k: add flush tx packets for SDIO chip
[ Upstream commit
dd7fc5545bbafdbd6c1efdc996b61883b285bdc5 ]
When station connected to AP, and run TX traffic such as TCP/UDP, and
system enter suspend state, then mac80211 call ath10k_flush with set
drop flag, recently it only send wmi peer flush to firmware and
firmware will flush all pending TX packets, for PCIe, firmware will
indicate the TX packets status to ath10k, and then ath10k indicate to
mac80211 TX complete with the status, then all the packets has been
flushed at this moment. For SDIO chip, it is different, its TX
complete indication is disabled by default, and it has a tx queue in
ath10k, and its tx credit control is enabled, total tx credit is 96,
when its credit is not sufficient, then the packets will buffered in
the tx queue of ath10k, max packets is TARGET_TLV_NUM_MSDU_DESC_HL
which is 1024, for SDIO, when mac80211 call ath10k_flush with set drop
flag, maybe it have pending packets in tx queue of ath10k, and if it
does not have sufficient tx credit, the packets will stay in queue
untill tx credit report from firmware, if it is a noisy environment,
tx speed is low and the tx credit report from firmware will delay more
time, then the num_pending_tx will remain > 0 untill all packets send
to firmware. After the 1st ath10k_flush, mac80211 will call the 2nd
ath10k_flush without set drop flag immediately, then it will call to
ath10k_mac_wait_tx_complete, and it wait untill num_pending_tx become
to 0, in noisy environment, it is esay to wait about near 5 seconds,
then it cause the suspend take long time.
1st and 2nd callstack of ath10k_flush
[ 303.740427] ath10k_sdio mmc1:0001:1: ath10k_flush drop:1, pending:0-0
[ 303.740495] ------------[ cut here ]------------
[ 303.740739] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.740757] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer
[ 303.740914] kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[ 303.741009] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 #2
[ 303.741027] Hardware name: MediaTek krane sku176 board (DT)
[ 303.741061] Workqueue: events_unbound async_run_entry_fn
[ 303.741086] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 303.741166] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.741244] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.741260] sp :
ffffffdf080e77a0
[ 303.741276] x29:
ffffffdf080e77a0 x28:
ffffffdef3730040
[ 303.741300] x27:
ffffff907c2240a0 x26:
ffffffde6ff39afc
[ 303.741321] x25:
ffffffdef3730040 x24:
ffffff907bf61018
[ 303.741343] x23:
ffffff907c2240a0 x22:
ffffffde6ff39a50
[ 303.741364] x21:
0000000000000001 x20:
ffffffde6ff39a50
[ 303.741385] x19:
ffffffde6bac2420 x18:
0000000000017200
[ 303.741407] x17:
ffffff907c24a000 x16:
0000000000000037
[ 303.741428] x15:
ffffff907b49a568 x14:
ffffff907cf332c1
[ 303.741476] x13:
00000000000922e4 x12:
0000000000000000
[ 303.741497] x11:
0000000000000001 x10:
0000000000000007
[ 303.741518] x9 :
f2256b8c1de4bc00 x8 :
f2256b8c1de4bc00
[ 303.741539] x7 :
ffffff907ab5e764 x6 :
0000000000000000
[ 303.741560] x5 :
0000000000000080 x4 :
0000000000000001
[ 303.741582] x3 :
ffffffdf080e74a8 x2 :
ffffff907aa91244
[ 303.741603] x1 :
ffffffdf080e74a8 x0 :
0000000000000024
[ 303.741624] Call trace:
[ 303.741701] ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.741941] __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[ 303.742098] ieee80211_flush_queues+0x34/0x44 [mac80211]
[ 303.742253] ieee80211_set_disassoc+0xc0/0x5ec [mac80211]
[ 303.742399] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[ 303.742535] ieee80211_deauth+0x24/0x30 [mac80211]
[ 303.742720] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[ 303.742849] cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[ 303.742971] cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[ 303.743087] __cfg80211_leave+0xe4/0x17c [cfg80211]
[ 303.743203] cfg80211_leave+0x38/0x50 [cfg80211]
[ 303.743319] wiphy_suspend+0x84/0x5bc [cfg80211]
[ 303.743335] dpm_run_callback+0x170/0x304
[ 303.743346] __device_suspend+0x2dc/0x3e8
[ 303.743356] async_suspend+0x2c/0xb0
[ 303.743370] async_run_entry_fn+0x48/0xf8
[ 303.743383] process_one_work+0x304/0x604
[ 303.743394] worker_thread+0x248/0x3f4
[ 303.743403] kthread+0x120/0x130
[ 303.743416] ret_from_fork+0x10/0x18
[ 303.743812] ath10k_sdio mmc1:0001:1: ath10k_flush drop:0, pending:0-0
[ 303.743858] ------------[ cut here ]------------
[ 303.744057] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.744075] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[ 303.744256] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 #2
[ 303.744273] Hardware name: MediaTek krane sku176 board (DT)
[ 303.744301] Workqueue: events_unbound async_run_entry_fn
[ 303.744325] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 303.744403] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.744480] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.744496] sp :
ffffffdf080e77a0
[ 303.744512] x29:
ffffffdf080e77a0 x28:
ffffffdef3730040
[ 303.744534] x27:
ffffff907c2240a0 x26:
ffffffde6ff39afc
[ 303.744556] x25:
ffffffdef3730040 x24:
ffffff907bf61018
[ 303.744577] x23:
ffffff907c2240a0 x22:
ffffffde6ff39a50
[ 303.744598] x21:
0000000000000000 x20:
ffffffde6ff39a50
[ 303.744620] x19:
ffffffde6bac2420 x18:
000000000001831c
[ 303.744641] x17:
ffffff907c24a000 x16:
0000000000000037
[ 303.744662] x15:
ffffff907b49a568 x14:
ffffff907cf332c1
[ 303.744683] x13:
00000000000922ea x12:
0000000000000000
[ 303.744704] x11:
0000000000000001 x10:
0000000000000007
[ 303.744747] x9 :
f2256b8c1de4bc00 x8 :
f2256b8c1de4bc00
[ 303.744768] x7 :
ffffff907ab5e764 x6 :
0000000000000000
[ 303.744789] x5 :
0000000000000080 x4 :
0000000000000001
[ 303.744810] x3 :
ffffffdf080e74a8 x2 :
ffffff907aa91244
[ 303.744831] x1 :
ffffffdf080e74a8 x0 :
0000000000000024
[ 303.744853] Call trace:
[ 303.744929] ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.745098] __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[ 303.745277] ieee80211_flush_queues+0x34/0x44 [mac80211]
[ 303.745424] ieee80211_set_disassoc+0x108/0x5ec [mac80211]
[ 303.745569] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[ 303.745706] ieee80211_deauth+0x24/0x30 [mac80211]
[ 303.745853] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[ 303.745979] cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[ 303.746103] cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[ 303.746219] __cfg80211_leave+0xe4/0x17c [cfg80211]
[ 303.746335] cfg80211_leave+0x38/0x50 [cfg80211]
[ 303.746452] wiphy_suspend+0x84/0x5bc [cfg80211]
[ 303.746467] dpm_run_callback+0x170/0x304
[ 303.746477] __device_suspend+0x2dc/0x3e8
[ 303.746487] async_suspend+0x2c/0xb0
[ 303.746498] async_run_entry_fn+0x48/0xf8
[ 303.746510] process_one_work+0x304/0x604
[ 303.746521] worker_thread+0x248/0x3f4
[ 303.746530] kthread+0x120/0x130
[ 303.746542] ret_from_fork+0x10/0x18
one sample's debugging log: it wait 3190 ms(5000 - 1810).
1st ath10k_flush, it has 120 packets in tx queue of ath10k:
<...>-1513 [000] .... 25374.786005: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:1, pending:120-0
<...>-1513 [000] ...1 25374.788375: ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_htt_tx_mgmt_inc_pending htt->num_pending_mgmt_tx:0
<...>-1500 [001] .... 25374.790143: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121
2st ath10k_flush, it has 121 packets in tx queue of ath10k:
<...>-1513 [000] .... 25374.790571: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:0, pending:121-0
<...>-1513 [000] .... 25374.791990: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete state:1 pending:121-0
<...>-1508 [001] .... 25374.792696: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:46
<...>-1508 [001] .... 25374.792700: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:46
<...>-1508 [001] .... 25374.792729: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121
<...>-1508 [001] .... 25374.792937: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:88, count:32, len:49792
<...>-1508 [001] .... 25374.793031: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:75, count:14, len:21784
kworker/u16:0-25773 [003] .... 25374.793701: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:46
<...>-1881 [000] .... 25375.073178: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:24
<...>-1881 [000] .... 25375.073182: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:24
<...>-1881 [000] .... 25375.073429: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:75
<...>-1879 [001] .... 25375.074090: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:24
<...>-1881 [000] .... 25375.074123: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:51, count:24, len:37344
<...>-1879 [001] .... 25375.270126: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:26
<...>-1879 [001] .... 25375.270130: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:26
<...>-1488 [000] .... 25375.270174: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:51
<...>-1488 [000] .... 25375.270529: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:25, count:26, len:40456
<...>-1879 [001] .... 25375.270693: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:26
<...>-1488 [001] .... 25377.775885: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:12
<...>-1488 [001] .... 25377.775890: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:12
<...>-1488 [001] .... 25377.775933: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:25
<...>-1488 [001] .... 25377.776059: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:13, count:12, len:18672
<...>-1879 [001] .... 25377.776100: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:12
<...>-1488 [001] .... 25377.878079: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:15
<...>-1488 [001] .... 25377.878087: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:15
<...>-1879 [000] .... 25377.878323: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:13
<...>-1879 [000] .... 25377.878487: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:0, count:13, len:20228
<...>-1879 [000] .... 25377.878497: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:13
<...>-1488 [001] .... 25377.919927: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:11
<...>-1488 [001] .... 25377.919932: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:13
<...>-1488 [001] .... 25377.919976: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:0
<...>-1881 [000] .... 25377.982645: ath10k_log_warn: ath10k_sdio mmc1:0001:1 HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION status:0
<...>-1513 [001] .... 25377.982973: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete time_left:1810, pending:0-0
Flush all pending TX packets for the 1st ath10k_flush reduced the wait
time of the 2nd ath10k_flush and then suspend take short time.
This Patch only effect SDIO chips.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200415233730.10581-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tiezhu Yang [Tue, 21 Apr 2020 11:59:46 +0000 (19:59 +0800)]
MIPS: Make sparse_init() using top-down allocation
[ Upstream commit
269b3a9ac538c4ae87f84be640b9fa89914a2489 ]
In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.
(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
swiotlb_init(1);
}
kernel/dma/swiotlb.c
void __init
swiotlb_init(int verbose)
{
...
vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
return;
...
pr_warn("Cannot allocate buffer");
no_iotlb_memory = true;
}
phys_addr_t swiotlb_tbl_map_single()
{
...
if (no_iotlb_memory)
panic("Can not allocate SWIOTLB buffer earlier ...");
...
}
(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
if (!octeon_swiotlb)
panic("%s: Failed to allocate %zu bytes align=%lx\n",
__func__, swiotlbsize, PAGE_SIZE);
...
}
Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.
In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.
Reported-by: Juxin Gao <gaojuxin@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kieran Bingham [Tue, 7 Apr 2020 15:44:17 +0000 (17:44 +0200)]
media: platform: fcp: Set appropriate DMA parameters
[ Upstream commit
dd844fb8e50b12e65bbdc5746c9876c6735500df ]
Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will
enable extra validation on DMA operations ensuring that the size
restraints are met.
When using the FCP in conjunction with the VSP1/DU, and display frames,
the size of the DMA operations is larger than the default maximum
segment size reported by the DMA core (64K). With the DMA debug enabled,
this produces a warning such as the following:
"DMA-API: rcar-fcp
fea27000.fcp: mapping sg segment longer than device
claims to support [len=3145728] [max=65536]"
We have no specific limitation on the segment size which isn't already
handled by the VSP1/DU which actually handles the DMA allcoations and
buffer management, so define a maximum segment size of up to 4GB (a 32
bit mask).
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes:
7b49235e83b2 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Mon, 10 Feb 2020 17:51:33 +0000 (18:51 +0100)]
media: dvb: return -EREMOTEIO on i2c transfer failure.
[ Upstream commit
96f3a9392799dd0f6472648a7366622ffd0989f3 ]
Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made. Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.
If the transfer fails, an uninitialized value will be read from b2.
Addresses-Coverity: ("Unused value")
Fixes:
fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Moore [Mon, 20 Apr 2020 14:09:29 +0000 (10:09 -0400)]
audit: fix a net reference leak in audit_send_reply()
[ Upstream commit
a48b284b403a4a073d8beb72d2bb33e54df67fb6 ]
If audit_send_reply() fails when trying to create a new thread to
send the reply it also fails to cleanup properly, leaking a reference
to a net structure. This patch fixes the error path and makes a
handful of other cleanups that came up while fixing the code.
Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jitao Shi [Wed, 15 Apr 2020 01:13:19 +0000 (09:13 +0800)]
drm/mediatek: set dpi pin mode to gpio low to avoid leakage current
[ Upstream commit
6bd4763fd532cff43f9b15704f324c45a9806f53 ]
Config dpi pins mode to output and pull low when dpi is disabled.
Aovid leakage current from some dpi pins (Hsync Vsync DE ... ).
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jitao Shi [Wed, 15 Apr 2020 01:13:17 +0000 (09:13 +0800)]
dt-bindings: display: mediatek: control dpi pins mode to avoid leakage
[ Upstream commit
b0ff9b590733079f7f9453e5976a9dd2630949e3 ]
Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Thu, 20 Feb 2020 06:23:02 +0000 (22:23 -0800)]
e1000: Distribute switch variables for initialization
[ Upstream commit
a34c7f5156654ebaf7eaace102938be7ff7036cb ]
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
3143 | unsigned int pull_size;
| ^~~~~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephane Eranian [Thu, 2 Apr 2020 15:43:54 +0000 (08:43 -0700)]
tools api fs: Make xxx__mountpoint() more scalable
[ Upstream commit
c6fddb28bad26e5472cb7acf7b04cd5126f1a4ab ]
The xxx_mountpoint() interface provided by fs.c finds mount points for
common pseudo filesystems. The first time xxx_mountpoint() is invoked,
it scans the mount table (/proc/mounts) looking for a match. If found,
it is cached. The price to scan /proc/mounts is paid once if the mount
is found.
When the mount point is not found, subsequent calls to xxx_mountpoint()
scan /proc/mounts over and over again. There is no caching.
This causes a scaling issue in perf record with hugeltbfs__mountpoint().
The function is called for each process found in
synthesize__mmap_events(). If the machine has thousands of processes
and if the /proc/mounts has many entries this could cause major overhead
in perf record. We have observed multi-second slowdowns on some
configurations.
As an example on a laptop:
Before:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
285
After:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
1
One could argue that the non-caching in case the moint point is not
found is intentional. That way subsequent calls may discover a moint
point if the sysadmin mounts the filesystem. But the same argument could
be made against caching the mount point. It could be unmounted causing
errors. It all depends on the intent of the interface. This patch
assumes it is expected to scan /proc/mounts once. The patch documents
the caching behavior in the fs.h header file.
An alternative would be to just fix perf record. But it would solve the
problem with hugetlbs__mountpoint() but there could be similar issues
(possibly down the line) with other xxx_mountpoint() calls in perf or
other tools.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Andersson [Wed, 15 Apr 2020 05:37:08 +0000 (22:37 -0700)]
regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
[ Upstream commit
906746ba26d0b45688f4c3b730c35f765dc958ba ]
Fix typos in pm8150 l13/l16/l17 and pm8150l ldo8 supplies.
Fixes:
06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200415053708.717623-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaehoon Chung [Mon, 30 Mar 2020 05:25:28 +0000 (14:25 +0900)]
brcmfmac: fix wrong location to get firmware feature
[ Upstream commit
c57673852062428cdeabdd6501ac8b8e4c302067 ]
sup_wpa feature is getting after setting feature_disable flag.
If firmware is supported sup_wpa feature, it's always enabled
regardless of feature_disable flag.
Fixes:
b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200330052528.10503-1-jh80.chung@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Mon, 13 Apr 2020 18:04:06 +0000 (21:04 +0300)]
spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource
[ Upstream commit
0dadde344d965566589cd82797893d5aa06557a3 ]
By unknown reason the commit
64bee4d28c9e
("spi / ACPI: add ACPI enumeration support")
missed the DataBitLength property to encounter when parse SPI slave
device data from ACPI.
Fill the gap here.
Fixes:
64bee4d28c9e ("spi / ACPI: add ACPI enumeration support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200413180406.1826-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bingbu Cao [Thu, 26 Mar 2020 14:54:37 +0000 (15:54 +0100)]
media: staging/intel-ipu3: Implement lock for stream on/off operations
[ Upstream commit
33e3c349b2bf1235be458df09fb8d237141486c4 ]
Currently concurrent stream off operations on ImgU nodes are not
synchronized, leading to use-after-free bugs (as reported by KASAN).
[ 250.090724] BUG: KASAN: use-after-free in
ipu3_dmamap_free+0xc5/0x116 [ipu3_imgu]
[ 250.090726] Read of size 8 at addr
ffff888127b29bc0 by task
yavta/18836
[ 250.090731] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.17.0 03/22/2018
[ 250.090732] Call Trace:
[ 250.090735] dump_stack+0x6a/0xb1
[ 250.090739] print_address_description+0x8e/0x279
[ 250.090743] ? ipu3_dmamap_free+0xc5/0x116 [ipu3_imgu]
[ 250.090746] kasan_report+0x260/0x28a
[ 250.090750] ipu3_dmamap_free+0xc5/0x116 [ipu3_imgu]
[ 250.090754] ipu3_css_pool_cleanup+0x24/0x37 [ipu3_imgu]
[ 250.090759] ipu3_css_pipeline_cleanup+0x61/0xb9 [ipu3_imgu]
[ 250.090763] ipu3_css_stop_streaming+0x1f2/0x321 [ipu3_imgu]
[ 250.090768] imgu_s_stream+0x94/0x443 [ipu3_imgu]
[ 250.090772] ? ipu3_vb2_buf_queue+0x280/0x280 [ipu3_imgu]
[ 250.090775] ? vb2_dma_sg_unmap_dmabuf+0x16/0x6f [videobuf2_dma_sg]
[ 250.090778] ? vb2_buffer_in_use+0x36/0x58 [videobuf2_common]
[ 250.090782] ipu3_vb2_stop_streaming+0xf9/0x135 [ipu3_imgu]
Implemented a lock to synchronize imgu stream on / off operations and
the modification of streaming flag (in struct imgu_device), to prevent
these issues.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Venkateswara Naralasetty [Wed, 1 Apr 2020 10:18:10 +0000 (15:48 +0530)]
ath10k: fix kernel null pointer dereference
[ Upstream commit
acb31476adc9ff271140cdd4d3c707ff0c97f5a4 ]
Currently sta airtime is updated without any lock in case of
host based airtime calculation. Which may result in accessing the
invalid sta pointer in case of continuous station connect/disconnect.
This patch fix the kernel null pointer dereference by updating the
station airtime with proper RCU lock in case of host based airtime
calculation.
Proceeding with the analysis of "ARM Kernel Panic".
The APSS crash happened due to OOPS on CPU 0.
Crash Signature : Unable to handle kernel NULL pointer dereference
at virtual address
00000300
During the crash,
PC points to "ieee80211_sta_register_airtime+0x1c/0x448 [mac80211]"
LR points to "ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core]".
The Backtrace obtained is as follows:
[<
bf880238>] (ieee80211_sta_register_airtime [mac80211]) from
[<
bf945a38>] (ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core])
[<
bf945a38>] (ath10k_txrx_tx_unref [ath10k_core]) from
[<
bf9428e4>] (ath10k_htt_txrx_compl_task+0xa50/0xfc0 [ath10k_core])
[<
bf9428e4>] (ath10k_htt_txrx_compl_task [ath10k_core]) from
[<
bf9b9bc8>] (ath10k_pci_napi_poll+0x50/0xf8 [ath10k_pci])
[<
bf9b9bc8>] (ath10k_pci_napi_poll [ath10k_pci]) from
[<
c059e3b0>] (net_rx_action+0xac/0x160)
[<
c059e3b0>] (net_rx_action) from [<
c02329a4>] (__do_softirq+0x104/0x294)
[<
c02329a4>] (__do_softirq) from [<
c0232b64>] (run_ksoftirqd+0x30/0x90)
[<
c0232b64>] (run_ksoftirqd) from [<
c024e358>] (smpboot_thread_fn+0x25c/0x274)
[<
c024e358>] (smpboot_thread_fn) from [<
c02482fc>] (kthread+0xd8/0xec)
Tested HW: QCA9888
Tested FW: 10.4-3.10-00047
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585736290-17661-1-git-send-email-vnaralas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Tue, 2 Jun 2020 04:50:23 +0000 (21:50 -0700)]
staging: android: ion: use vmap instead of vm_map_ram
[ Upstream commit
5bf9917452112694b2c774465ee4dbe441c84b77 ]
vm_map_ram can keep mappings around after the vm_unmap_ram. Using that
with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Tue, 2 Jun 2020 04:50:19 +0000 (21:50 -0700)]
x86: fix vmap arguments in map_irq_stack
[ Upstream commit
0348801151b5aefbcf9d6e9b9e30aceb3a2a7b13 ]
vmap does not take a gfp_t, the flags argument is for VM_* flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-3-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Sat, 30 May 2020 02:41:50 +0000 (10:41 +0800)]
net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()
[ Upstream commit
3e1c6846b9e108740ef8a37be80314053f5dd52a ]
The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.
To fix this possible bug, n is checked after being used.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Doron [Fri, 24 Apr 2020 11:37:40 +0000 (14:37 +0300)]
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
[ Upstream commit
f7d31e65368aeef973fab788aa22c4f1d5a6af66 ]
The problem the patch is trying to address is the fact that 'struct
kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit
modes.
In 64-bit mode the default alignment boundary is 64 bits thus
forcing extra gaps after 'type' and 'msr' but in 32-bit mode the
boundary is at 32 bits thus no extra gaps.
This is an issue as even when the kernel is 64 bit, the userspace using
the interface can be both 32 and 64 bit but the same 32 bit userspace has
to work with 32 bit kernel.
The issue is fixed by forcing the 64 bit layout, this leads to ABI
change for 32 bit builds and while we are obviously breaking '32 bit
userspace with 32 bit kernel' case, we're fixing the '32 bit userspace
with 64 bit kernel' one.
As the interface has no (known) users and 32 bit KVM is rather baroque
nowadays, this seems like a reasonable decision.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <
20200424113746.3473563-2-arilou@gmail.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Serge Semin [Fri, 29 May 2020 13:11:57 +0000 (16:11 +0300)]
spi: dw: Fix Rx-only DMA transfers
[ Upstream commit
46164fde6b7890e7a3982d54549947c8394c0192 ]
Tx-only DMA transfers are working perfectly fine since in this case
the code just ignores the Rx FIFO overflow interrupts. But it turns
out the SPI Rx-only transfers are broken since nothing pushing any
data to the shift registers, so the Rx FIFO is left empty and the
SPI core subsystems just returns a timeout error. Since DW DMAC
driver doesn't support something like cyclic write operations of
a single byte to a device register, the only way to support the
Rx-only SPI transfers is to fake it by using a dummy Tx-buffer.
This is what we intend to fix in this commit by setting the
SPI_CONTROLLER_MUST_TX flag for DMA-capable platform.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Fri, 29 May 2020 02:27:26 +0000 (10:27 +0800)]
Bluetooth: btmtkuart: Improve exception handling in btmtuart_probe()
[ Upstream commit
4803c54ca24923a30664bea2a7772db6e7303c51 ]
Calls of the functions clk_disable_unprepare() and hci_free_dev()
were missing for the exception handling.
Thus add the missed function calls together with corresponding
jump targets.
Fixes:
055825614c6b ("Bluetooth: btmtkuart: add an implementation for clock osc property")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Sun, 3 May 2020 22:28:05 +0000 (00:28 +0200)]
mmc: meson-mx-sdio: trigger a soft reset after a timeout or CRC error
[ Upstream commit
91995b904ec2e44b5c159ac6a5d3f154345a4de7 ]
The vendor driver (from the 3.10 kernel) triggers a soft reset every
time before starting a new command. While this fixes a problem where
SDIO cards are not detected at all (because all commands simply
timed out) this hurts SD card read performance a bit (in my tests
between 10% to 20%).
Trigger a soft reset after we got a CRC error or if the previous command
timed out (just like the vendor driver from the same 3.10 kernel for the
newer SDHC controller IP does). This fixes detection of SDIO cards and
doesn't hurt SD card read performance at the same time.
With this patch the initialization of an RTL8723BS SDIO card looks like
this:
req done (CMD52): -110:
00000000 00000000 00000000 00000000
clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0
starting CMD0 arg
00000000 flags
000000c0
req done (CMD0): 0:
00000000 00000000 00000000 00000000
clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0
starting CMD8 arg
000001aa flags
000002f5
req done (CMD8): -110:
00000000 00000000 00000000 00000000
starting CMD5 arg
00000000 flags
000002e1
req done (CMD5): 0:
90ff0000 00000000 00000000 00000000
starting CMD5 arg
00200000 flags
000002e1
req done (CMD5): 0:
90ff0000 00000000 00000000 00000000
starting CMD3 arg
00000000 flags
00000075
req done (CMD3): 0:
00010000 00000000 00000000 00000000
starting CMD7 arg
00010000 flags
00000015
req done (CMD7): 0:
00001e00 00000000 00000000 00000000
starting CMD52 arg
00000000 flags
00000195
req done (CMD52): 0:
00001032 00000000 00000000 00000000
[... more CMD52 omitted ...]
clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
starting CMD52 arg
00000e00 flags
00000195
req done (CMD52): 0:
00001000 00000000 00000000 00000000
starting CMD52 arg
80000e02 flags
00000195
req done (CMD52): 0:
00001002 00000000 00000000 00000000
clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2
starting CMD52 arg
00020000 flags
00000195
req done (CMD52): 0:
00001007 00000000 00000000 00000000
[... more CMD52 omitted ...]
new high speed SDIO card at address 0001
Fixes:
ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googlemail.com
Tested-by: Tobias Baumann <017623705678@o2online.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Surabhi Boob [Sat, 16 May 2020 00:36:43 +0000 (17:36 -0700)]
ice: Fix for memory leaks and modify ICE_FREE_CQ_BUFS
[ Upstream commit
68d270783742783f96e89ef92ac24ab3c7fb1d31 ]
Handle memory leaks during control queue initialization and
buffer allocation failures. The macro ICE_FREE_CQ_BUFS is modified to
re-use for this fix.
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Surabhi Boob [Sat, 16 May 2020 00:36:42 +0000 (17:36 -0700)]
ice: Fix memory leak
[ Upstream commit
1aaef2bc4e0a5ce9e4dd86359e6a0bf52c6aa64f ]
Handle memory leak on filter management initialization failure.
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Eckelmann [Mon, 25 Nov 2019 09:46:50 +0000 (10:46 +0100)]
batman-adv: Revert "disable ethtool link speed detection when auto negotiation off"
[ Upstream commit
9ad346c90509ebd983f60da7d082f261ad329507 ]
The commit
8c46fcd78308 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.
But there are major flaws with this argumentation:
* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
values
The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).
Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Tue, 19 May 2020 11:59:12 +0000 (12:59 +0100)]
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
[ Upstream commit
e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]
Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:
bic rd, sp, #8128
bic rd, rd, #63
This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).
As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.
Fix it by this little oneline suggested by Ard:
bic rd, sp, #(THREAD_SIZE - 1) & ~63
Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.
We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Filipe Manana [Mon, 18 May 2020 11:15:09 +0000 (12:15 +0100)]
btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums
[ Upstream commit
7e4a3f7ed5d54926ec671bbb13e171cfe179cc50 ]
We are currently treating any non-zero return value from btrfs_next_leaf()
the same way, by going to the code that inserts a new checksum item in the
tree. However if btrfs_next_leaf() returns an error (a value < 0), we
should just stop and return the error, and not behave as if nothing has
happened, since in that case we do not have a way to know if there is a
next leaf or we are currently at the last leaf already.
So fix that by returning the error from btrfs_next_leaf().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef Bacik [Fri, 13 Mar 2020 19:58:07 +0000 (15:58 -0400)]
btrfs: account for trans_block_rsv in may_commit_transaction
[ Upstream commit
bb4f58a747f0421b10645fbf75a6acc88da0de50 ]
On ppc64le with 64k page size (respectively 64k block size) generic/320
was failing and debug output showed we were getting a premature ENOSPC
with a bunch of space in btrfs_fs_info::trans_block_rsv.
This meant there were still open transaction handles holding space, yet
the flusher didn't commit the transaction because it deemed the freed
space won't be enough to satisfy the current reserve ticket. Fix this
by accounting for space in trans_block_rsv when deciding whether the
current transaction should be committed or not.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brad Love [Thu, 14 May 2020 16:40:43 +0000 (18:40 +0200)]
media: dvbdev: Fix tuner->demod media controller link
[ Upstream commit
9f984cacf4f4d53fd8a3f44d7f13528b81c1f6a8 ]
Fixes bug exposed by:
[
a3fbc2e6bb0: media: mc-entity.c: use WARN_ON, validate link pads]
The dvbdev incorrectly requests a tuner sink pad to connect to a demux
sink pad. The media controller failure percolates back and the dvb device
creation fails. Fix this by requesting a tuner source pad. Instead of
forcing that pad to be index zero, check if a negative integer error
is returned. A note is added that first source pad found is chosen.
Affected bridges cx231xx and em28xx printed the below warning[s]
when a variety of media controller dvb enabled devices were connected.
The warning returns an error causing all affected devices to fail DVB
device creation.
[ 253.138332] ------------[ cut here ]------------
[ 253.138339] WARNING: CPU: 0 PID: 1550 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[ 253.138339] Modules linked in: si2168 em28xx_dvb(+) em28xx si2157 lgdt3306a cx231xx_dvb dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core eda
c_mce_amd kvm nls_iso8859_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_in
tel video snd_intel_dspcfg ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_p
c ppdev lp parport ip_tables x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt
[ 253.138370] gpio_generic
[ 253.138372] CPU: 0 PID: 1550 Comm: modprobe Tainted: G W 5.7.0-rc2+ #181
[ 253.138373] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[ 253.138376] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[ 253.138378] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[ 253.138379] RSP: 0018:
ffffb9ecc0ee7a78 EFLAGS:
00010246
[ 253.138380] RAX:
ffff943f706c99d8 RBX:
0000000000000000 RCX:
0000000000000000
[ 253.138381] RDX:
ffff943f613e0180 RSI:
0000000000000000 RDI:
ffff943f706c9958
[ 253.138381] RBP:
ffffb9ecc0ee7ab0 R08:
0000000000000001 R09:
ffff943f613e0180
[ 253.138382] R10:
ffff943f613e0180 R11:
ffff943f706c9400 R12:
0000000000000000
[ 253.138383] R13:
0000000000000001 R14:
ffff943f706c9958 R15:
0000000000000001
[ 253.138384] FS:
00007f3cd29ba540(0000) GS:
ffff943f8ec00000(0000) knlGS:
0000000000000000
[ 253.138385] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 253.138385] CR2:
000055f7de0ca830 CR3:
00000003dd208000 CR4:
00000000003406f0
[ 253.138386] Call Trace:
[ 253.138392] media_create_pad_links+0x104/0x1b0 [mc]
[ 253.138397] dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[ 253.138402] em28xx_dvb_init+0x5ea/0x2600 [em28xx_dvb]
[ 253.138408] em28xx_register_extension+0x63/0xc0 [em28xx]
[ 253.138410] ? 0xffffffffc039c000
[ 253.138412] em28xx_dvb_register+0x15/0x1000 [em28xx_dvb]
[ 253.138416] do_one_initcall+0x71/0x250
[ 253.138418] ? do_init_module+0x27/0x22e
[ 253.138421] ? _cond_resched+0x1a/0x50
[ 253.138423] ? kmem_cache_alloc_trace+0x1ec/0x270
[ 253.138425] ? __vunmap+0x1e3/0x240
[ 253.138427] do_init_module+0x5f/0x22e
[ 253.138430] load_module+0x2525/0x2d40
[ 253.138436] __do_sys_finit_module+0xe5/0x120
[ 253.138438] ? __do_sys_finit_module+0xe5/0x120
[ 253.138442] __x64_sys_finit_module+0x1a/0x20
[ 253.138443] do_syscall_64+0x57/0x1b0
[ 253.138445] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 253.138446] RIP: 0033:0x7f3cd24dc839
[ 253.138448] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[ 253.138449] RSP: 002b:
00007ffe4fc514d8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 253.138450] RAX:
ffffffffffffffda RBX:
000055a9237f63f0 RCX:
00007f3cd24dc839
[ 253.138451] RDX:
0000000000000000 RSI:
000055a922c3ad2e RDI:
0000000000000000
[ 253.138451] RBP:
000055a922c3ad2e R08:
0000000000000000 R09:
0000000000000000
[ 253.138452] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
[ 253.138453] R13:
000055a9237f5550 R14:
0000000000040000 R15:
000055a9237f63f0
[ 253.138456] ---[ end trace
a60f19c54aa96ec4 ]---
[ 234.915628] ------------[ cut here ]------------
[ 234.915640] WARNING: CPU: 0 PID: 1502 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc]
[ 234.915641] Modules linked in: si2157 lgdt3306a cx231xx_dvb(+) dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core edac_mce_amd kvm nls_iso8859
_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_intel video snd_intel_dspcf
g ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tab
les x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt gpio_generic
[ 234.915700] CPU: 0 PID: 1502 Comm: modprobe Not tainted 5.7.0-rc2+ #181
[ 234.915702] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018
[ 234.915709] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc]
[ 234.915712] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90
[ 234.915714] RSP: 0018:
ffffb9ecc1b6fa50 EFLAGS:
00010246
[ 234.915717] RAX:
ffff943f8c94a9d8 RBX:
0000000000000000 RCX:
0000000000000000
[ 234.915719] RDX:
ffff943f613e0900 RSI:
0000000000000000 RDI:
ffff943f8c94a958
[ 234.915721] RBP:
ffffb9ecc1b6fa88 R08:
0000000000000001 R09:
ffff943f613e0900
[ 234.915723] R10:
ffff943f613e0900 R11:
ffff943f6b590c00 R12:
0000000000000000
[ 234.915724] R13:
0000000000000001 R14:
ffff943f8c94a958 R15:
0000000000000001
[ 234.915727] FS:
00007f4ca3646540(0000) GS:
ffff943f8ec00000(0000) knlGS:
0000000000000000
[ 234.915729] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 234.915731] CR2:
00007fff7a53ba18 CR3:
00000003da614000 CR4:
00000000003406f0
[ 234.915733] Call Trace:
[ 234.915745] media_create_pad_links+0x104/0x1b0 [mc]
[ 234.915756] dvb_create_media_graph+0x350/0x5f0 [dvb_core]
[ 234.915766] dvb_init.part.4+0x691/0x1360 [cx231xx_dvb]
[ 234.915780] dvb_init+0x1a/0x20 [cx231xx_dvb]
[ 234.915787] cx231xx_register_extension+0x71/0xa0 [cx231xx]
[ 234.915791] ? 0xffffffffc042f000
[ 234.915796] cx231xx_dvb_register+0x15/0x1000 [cx231xx_dvb]
[ 234.915802] do_one_initcall+0x71/0x250
[ 234.915807] ? do_init_module+0x27/0x22e
[ 234.915811] ? _cond_resched+0x1a/0x50
[ 234.915816] ? kmem_cache_alloc_trace+0x1ec/0x270
[ 234.915820] ? __vunmap+0x1e3/0x240
[ 234.915826] do_init_module+0x5f/0x22e
[ 234.915831] load_module+0x2525/0x2d40
[ 234.915848] __do_sys_finit_module+0xe5/0x120
[ 234.915850] ? __do_sys_finit_module+0xe5/0x120
[ 234.915862] __x64_sys_finit_module+0x1a/0x20
[ 234.915865] do_syscall_64+0x57/0x1b0
[ 234.915870] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 234.915872] RIP: 0033:0x7f4ca3168839
[ 234.915876] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
[ 234.915878] RSP: 002b:
00007ffcea3db3b8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 234.915881] RAX:
ffffffffffffffda RBX:
000055af22c29340 RCX:
00007f4ca3168839
[ 234.915882] RDX:
0000000000000000 RSI:
000055af22c38390 RDI:
0000000000000001
[ 234.915884] RBP:
000055af22c38390 R08:
0000000000000000 R09:
0000000000000000
[ 234.915885] R10:
0000000000000001 R11:
0000000000000246 R12:
0000000000000000
[ 234.915887] R13:
000055af22c29060 R14:
0000000000040000 R15:
0000000000000000
[ 234.915896] ---[ end trace
a60f19c54aa96ec3 ]---
Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Serge Semin [Thu, 21 May 2020 20:48:15 +0000 (23:48 +0300)]
clocksource: dw_apb_timer_of: Fix missing clockevent timers
[ Upstream commit
6d2e16a3181bafb77b535095c39ad1c8b9558c8c ]
Commit
100214889973 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.
Fixes:
100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Serge Semin [Thu, 21 May 2020 20:48:13 +0000 (23:48 +0300)]
clocksource: dw_apb_timer: Make CPU-affiliation being optional
[ Upstream commit
cee43dbf2ee3f430434e2b66994eff8a1aeda889 ]
Currently the DW APB Timer driver binds each clockevent timers to a
particular CPU. This isn't good for multiple reasons. First of all seeing
the device is placed on APB bus (which makes it accessible from any CPU
core), accessible over MMIO and having the DYNIRQ flag set we can be sure
that manually binding the timer to any CPU just isn't correct. By doing
so we just set an extra limitation on device usage. This also doesn't
reflect the device actual capability, since by setting the IRQ affinity
we can make it virtually local to any CPU. Secondly imagine if you had a
real CPU-local timer with the same rating and the same CPU-affinity.
In this case if DW APB timer was registered first, then due to the
clockevent framework tick-timer selection procedure we'll end up with the
real CPU-local timer being left unselected for clock-events tracking. But
on most of the platforms (MIPS/ARM/etc) such timers are normally embedded
into the CPU core and are accessible with much better performance then
devices placed on APB. For instance in MIPS architectures there is
r4k-timer, which is CPU-local, assigned with the same rating, and normally
its clockevent device is registered after the platform-specific one.
So in order to fix all of these issues let's make the DW APB Timer CPU
affinity being optional and deactivated by passing a negative CPU id,
which will effectively set the DW APB clockevent timer cpumask to
'cpu_possible_mask'.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Serge Semin [Fri, 22 May 2020 00:07:51 +0000 (03:07 +0300)]
spi: dw: Enable interrupts in accordance with DMA xfer mode
[ Upstream commit
43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]
It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.
Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Serge Semin [Thu, 21 May 2020 14:07:16 +0000 (17:07 +0300)]
mips: Fix cpu_has_mips64r1/2 activation for MIPS32 CPUs
[ Upstream commit
a2ac81c6ef4018ea49c034ce165bb9ea1cf99f3e ]
Commit
1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA
allows") updated the cpu_has_mips* macro to be replaced with a constant
expression where it's possible. By mistake it wasn't done correctly
for cpu_has_mips64r1/cpu_has_mips64r2 macro. They are defined to
be replaced with conditional expression __isa_range_or_flag(), which
means either ISA revision being within the range or the corresponding
CPU options flag was set at the probe stage or both being true at the
same time. But the ISA level value doesn't indicate whether the ISA is
MIPS32 or MIPS64. Due to this if we select MIPS32r1 - MIPS32r5
architectures the __isa_range() macro will activate the
cpu_has_mips64rX flags, which is incorrect. In order to fix the
problem we make sure the 64bits CPU support is enabled by means of
checking the flag cpu_has_64bits aside with proper ISA range and specific
Revision flag being set.
Fixes:
1aeba347b3a9 ("MIPS: Hardcode cpu_has_mips* where target ISA allows")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tuan Phan [Wed, 20 May 2020 17:13:07 +0000 (10:13 -0700)]
ACPI/IORT: Fix PMCG node single ID mapping handling
[ Upstream commit
50c8ab8d9fbf5b18d5162a797ca26568afc0af1a ]
An IORT PMCG node can have no ID mapping if its overflow interrupt is
wire based therefore the code that parses the PMCG node can not assume
the node will always have a single mapping present at index 0.
Fix iort_get_id_mapping_index() by checking for an overflow interrupt
and mapping count.
Fixes:
24e516049360 ("ACPI/IORT: Add support for PMCG")
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Hanjun Guo <guoahanjun@huawei.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/1589994787-28637-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jean-Philippe Brucker [Wed, 22 Apr 2020 08:48:06 +0000 (10:48 +0200)]
pmu/smmuv3: Clear IRQ affinity hint on device removal
[ Upstream commit
10f6cd2af21bb44faab31a50ec3361d7649e5a39 ]
Currently when trying to remove the SMMUv3 PMU module we get a
WARN_ON_ONCE from free_irq(), because the affinity hint set during probe
hasn't been properly cleared.
[ 238.878383] WARNING: CPU: 0 PID: 175 at kernel/irq/manage.c:1744 free_irq+0x324/0x358
...
[ 238.897263] Call trace:
[ 238.897998] free_irq+0x324/0x358
[ 238.898792] devm_irq_release+0x18/0x28
[ 238.899189] release_nodes+0x1b0/0x228
[ 238.899984] devres_release_all+0x38/0x60
[ 238.900779] device_release_driver_internal+0x10c/0x1d0
[ 238.901574] driver_detach+0x50/0xe0
[ 238.902368] bus_remove_driver+0x5c/0xd8
[ 238.903448] driver_unregister+0x30/0x60
[ 238.903958] platform_driver_unregister+0x14/0x20
[ 238.905075] arm_smmu_pmu_exit+0x1c/0xecc [arm_smmuv3_pmu]
[ 238.905547] __arm64_sys_delete_module+0x14c/0x260
[ 238.906342] el0_svc_common.constprop.0+0x74/0x178
[ 238.907355] do_el0_svc+0x24/0x90
[ 238.907932] el0_sync_handler+0x11c/0x198
[ 238.908979] el0_sync+0x158/0x180
Just like the other perf drivers, clear the affinity hint before
releasing the device.
Fixes:
7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200422084805.237738-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Thu, 7 May 2020 20:08:44 +0000 (13:08 -0700)]
kgdb: Prevent infinite recursive entries to the debugger
[ Upstream commit
3ca676e4ca60d1834bb77535dafe24169cadacef ]
If we detect that we recursively entered the debugger we should hack
our I/O ops to NULL so that the panic() in the next line won't
actually cause another recursion into the debugger. The first line of
kgdb_panic() will check this and return.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Thu, 7 May 2020 20:08:39 +0000 (13:08 -0700)]
kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb
[ Upstream commit
202164fbfa2b2ffa3e66b504e0f126ba9a745006 ]
In commit
81eaadcae81b ("kgdboc: disable the console lock when in
kgdb") we avoided the WARN_CONSOLE_UNLOCKED() yell when we were in
kgdboc. That still works fine, but it turns out that we get a similar
yell when using other I/O drivers. One example is the "I/O driver"
for the kgdb test suite (kgdbts). When I enabled that I again got the
same yells.
Even though "kgdbts" doesn't actually interact with the user over the
console, using it still causes kgdb to print to the consoles. That
trips the same warning:
con_is_visible+0x60/0x68
con_scroll+0x110/0x1b8
lf+0x4c/0xc8
vt_console_print+0x1b8/0x348
vkdb_printf+0x320/0x89c
kdb_printf+0x68/0x90
kdb_main_loop+0x190/0x860
kdb_stub+0x2cc/0x3ec
kgdb_cpu_enter+0x268/0x744
kgdb_handle_exception+0x1a4/0x200
kgdb_compiled_brk_fn+0x34/0x44
brk_handler+0x7c/0xb8
do_debug_exception+0x1b4/0x228
Let's increment/decrement the "ignore_console_lock_warning" variable
all the time when we enter the debugger.
This will allow us to later revert commit
81eaadcae81b ("kgdboc:
disable the console lock when in kgdb").
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.1.Ied2b058357152ebcc8bf68edd6f20a11d98d7d4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hsin-Yu Chao [Fri, 15 May 2020 09:27:04 +0000 (17:27 +0800)]
Bluetooth: Add SCO fallback for invalid LMP parameters error
[ Upstream commit
56b5453a86203a44726f523b4133c1feca49ce7c ]
Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.
This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x0380
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) ncmd 1
Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
Handle: 0
Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
Link type: eSCO (0x02)
Transmission interval: 0x00
Retransmission window: 0x02
RX packet length: 0
TX packet length: 0
Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 8
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x03c8
EV3 may be used
2-EV3 may not be used
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) ncmd 1
Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
Status: Success (0x00)
Handle: 257
Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
Link type: eSCO (0x02)
Transmission interval: 0x06
Retransmission window: 0x04
RX packet length: 30
TX packet length: 30
Air mode: Transparent (0x03)
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tiezhu Yang [Sat, 16 May 2020 02:15:48 +0000 (10:15 +0800)]
MIPS: Loongson: Build ATI Radeon GPU driver as module
[ Upstream commit
a44de7497f91834df0b8b6d459e259788ba66794 ]
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes:
024e6a8b5bb1 ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Koba Ko [Mon, 11 May 2020 01:44:56 +0000 (09:44 +0800)]
platform/x86: dell-laptop: don't register micmute LED if there is no token
[ Upstream commit
257e03a334ccb96e657bf5f6ab3b5693a22c2aa4 ]
On Dell G3-3590, error message is issued during boot up,
"platform::micmute: Setting an LED's brightness failed (-19)",
but there's no micmute led on the machine.
Get the related tokens of SMBIOS, GLOBAL_MIC_MUTE_DISABLE/ENABLE.
If one of two tokens doesn't exist,
don't call led_classdev_register() for platform::micmute.
After that, you wouldn't see the platform::micmute in /sys/class/leds/,
and the error message wouldn't see in dmesg.
Fixes:
d00fa46e0a2c6 ("platform/x86: dell-laptop: Add micmute LED trigger support")
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jesper Dangaard Brouer [Thu, 14 May 2020 10:50:49 +0000 (12:50 +0200)]
ixgbe: Fix XDP redirect on archs with PAGE_SIZE above 4K
[ Upstream commit
88eb0ee17b2ece64fcf6689a4557a5c2e7a89c4b ]
The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).
This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap. Fix by adding size of skb_shared_info tailroom.
Maintainers notice: This fix have been queued to Jeff.
Fixes:
6453073987ba ("ixgbe: add initial support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Cline [Thu, 14 May 2020 14:05:46 +0000 (10:05 -0400)]
lockdown: Allow unprivileged users to see lockdown status
[ Upstream commit
60cf7c5ed5f7087c4de87a7676b8c82d96fd166c ]
A number of userspace tools, such as systemtap, need a way to see the
current lockdown state so they can gracefully deal with the kernel being
locked down. The state is already exposed in
/sys/kernel/security/lockdown, but is only readable by root. Adjust the
permissions so unprivileged users can read the state.
Fixes:
000d388ed3bb ("security: Add a static lockdown policy LSM")
Cc: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomohito Esaki [Wed, 1 Apr 2020 06:11:00 +0000 (15:11 +0900)]
drm: rcar-du: Set primary plane zpos immutably at initializing
[ Upstream commit
7982471d01aac33994276bf567c8f1f3a137648a ]
According to drm_plane_create_zpos_property() function documentation,
all planes zpos range should be set if zpos property is supported.
However, the rcar-du driver didn't set primary plane zpos range. Since
the primary plane's zpos is fixed, set it immutably.
Reported-by: Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com>
Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Turn continue into if ... else ...]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Weiping Zhang [Wed, 13 May 2020 00:44:05 +0000 (08:44 +0800)]
block: reset mapping if failed to update hardware queue count
[ Upstream commit
aa880ad690ab6d4c53934af85fb5a43e69ecb0f5 ]
When we increase hardware queue count, blk_mq_update_queue_map will
reset the mapping between cpu and hardware queue base on the hardware
queue count(set->nr_hw_queues). The mapping cannot be reset if it
encounters error in blk_mq_realloc_hw_ctxs, but the fallback flow will
continue using it, then blk_mq_map_swqueue will touch a invalid memory,
because the mapping points to a wrong hctx.
blktest block/030:
null_blk: module loaded
Increasing nr_hw_queues to 8 fails, fallback to 1
==================================================================
BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x2f2/0x830
Read of size 8 at addr
0000000000000128 by task nproc/8541
CPU: 5 PID: 8541 Comm: nproc Not tainted 5.7.0-rc4-dbg+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0xbb
kasan_report+0x45/0x60
check_memory_region+0x15e/0x1c0
__kasan_check_read+0x15/0x20
blk_mq_map_swqueue+0x2f2/0x830
__blk_mq_update_nr_hw_queues+0x3df/0x690
blk_mq_update_nr_hw_queues+0x32/0x50
nullb_device_submit_queues_store+0xde/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x14b/0x2d0
ksys_write+0xdd/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x310
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luke Nelson [Fri, 8 May 2020 18:15:44 +0000 (11:15 -0700)]
arm64: insn: Fix two bugs in encoding 32-bit logical immediates
[ Upstream commit
579d1b3faa3735e781ff74aac0afd598515dbc63 ]
This patch fixes two issues present in the current function for encoding
arm64 logical immediates when using the 32-bit variants of instructions.
First, the code does not correctly reject an all-ones 32-bit immediate,
and returns an undefined instruction encoding.
Second, the code incorrectly rejects some 32-bit immediates that are
actually encodable as logical immediates. The root cause is that the code
uses a default mask of 64-bit all-ones, even for 32-bit immediates.
This causes an issue later on when the default mask is used to fill the
top bits of the immediate with ones, shown here:
/*
* Pattern: 0..01..10..01..1
*
* Fill the unused top bits with ones, and check if
* the result is a valid immediate (all ones with a
* contiguous ranges of zeroes).
*/
imm |= ~mask;
if (!range_of_ones(~imm))
return AARCH64_BREAK_FAULT;
To see the problem, consider an immediate of the form 0..01..10..01..1,
where the upper 32 bits are zero, such as 0x80000001. The code checks
if ~(imm | ~mask) contains a range of ones: the incorrect mask yields
1..10..01..10..0, which fails the check; the correct mask yields
0..01..10..0, which succeeds.
The fix for both issues is to generate a correct mask based on the
instruction immediate size, and use the mask to check for all-ones,
all-zeroes, and values wider than the mask.
Currently, arch/arm64/kvm/va_layout.c is the only user of this function,
which uses 64-bit immediates and therefore won't trigger these bugs.
We tested the new code against llvm-mc with all 1,302 encodable 32-bit
logical immediates and all 5,334 encodable 64-bit logical immediates.
Fixes:
ef3935eeebff ("arm64: insn: Add encoder for bitwise operations using literals")
Suggested-by: Will Deacon <will@kernel.org>
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Thu, 7 May 2020 13:04:08 +0000 (21:04 +0800)]
block: alloc map and request for new hardware queue
[ Upstream commit
fd689871bbfbb41cd77379d3e9e5f4def0f7d6c6 ]
Alloc new map and request for new hardware queue when increse
hardware queue count. Before this patch, it will show a
warning for each new hardware queue, but it's not enough, these
hctx have no maps and reqeust, when a bio was mapped to these
hardware queue, it will trigger kernel panic when get request
from these hctx.
Test environment:
* A NVMe disk supports 128 io queues
* 96 cpus in system
A corner case can always trigger this panic, there are 96
io queues allocated for HCTX_TYPE_DEFAULT type, the corresponding kernel
log: nvme nvme0: 96/0/0 default/read/poll queues. Now we set nvme write
queues to 96, then nvme will alloc others(32) queues for read, but
blk_mq_update_nr_hw_queues does not alloc map and request for these new
added io queues. So when process read nvme disk, it will trigger kernel
panic when get request from these hardware context.
Reproduce script:
nr=$(expr `cat /sys/block/nvme0n1/device/queue_count` - 1)
echo $nr > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller
dd if=/dev/nvme0n1 of=/dev/null bs=4K count=1
[ 8040.805626] ------------[ cut here ]------------
[ 8040.805627] WARNING: CPU: 82 PID: 12921 at block/blk-mq.c:2578 blk_mq_map_swqueue+0x2b6/0x2c0
[ 8040.805627] Modules linked in: nvme nvme_core nf_conntrack_netlink xt_addrtype br_netfilter overlay xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nf_conntrack_tftp nft_masq nf_tables_set nft_fib_inet nft_f
ib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack tun bridge nf_defrag_ipv6 nf_defrag_ipv4 stp llc ip6_tables ip_tables nft_compat rfkill ip_set nf_tables nfne
tlink sunrpc intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass ipmi_ssif crct10dif_pclmul crc32_pclmul iTCO_wdt iTCO_vendor_support ghash_clmulni_intel intel_
cstate intel_uncore raid0 joydev intel_rapl_perf ipmi_si pcspkr mei_me ioatdma sg ipmi_devintf mei i2c_i801 dca lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sd_mod ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm d
rm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops
[ 8040.805637] ahci drm i40e libahci crc32c_intel libata t10_pi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nvme_core]
[ 8040.805640] CPU: 82 PID: 12921 Comm: kworker/u194:2 Kdump: loaded Tainted: G W 5.6.0-rc5.78317c+ #2
[ 8040.805640] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[ 8040.805641] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[ 8040.805642] RIP: 0010:blk_mq_map_swqueue+0x2b6/0x2c0
[ 8040.805643] Code: 00 00 00 00 00 41 83 c5 01 44 39 6d 50 77 b8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b bb 98 00 00 00 89 d6 e8 8c 81 03 00 eb 83 <0f> 0b e9 52 ff ff ff 0f 1f 00 0f 1f 44 00 00 41 57 48 89 f1 41 56
[ 8040.805643] RSP: 0018:
ffffba590d2e7d48 EFLAGS:
00010246
[ 8040.805643] RAX:
0000000000000000 RBX:
ffff9f013e1ba800 RCX:
000000000000003d
[ 8040.805644] RDX:
ffff9f00ffff6000 RSI:
0000000000000003 RDI:
ffff9ed200246d90
[ 8040.805644] RBP:
ffff9f00f6a79860 R08:
0000000000000000 R09:
000000000000003d
[ 8040.805645] R10:
0000000000000001 R11:
ffff9f0138c3d000 R12:
ffff9f00fb3a9008
[ 8040.805645] R13:
000000000000007f R14:
ffffffff96822660 R15:
000000000000005f
[ 8040.805645] FS:
0000000000000000(0000) GS:
ffff9f013fa80000(0000) knlGS:
0000000000000000
[ 8040.805646] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8040.805646] CR2:
00007f7f397fa6f8 CR3:
0000003d8240a002 CR4:
00000000007606e0
[ 8040.805647] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 8040.805647] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 8040.805647] PKRU:
55555554
[ 8040.805647] Call Trace:
[ 8040.805649] blk_mq_update_nr_hw_queues+0x31b/0x390
[ 8040.805650] nvme_reset_work+0xb4b/0xeab [nvme]
[ 8040.805651] process_one_work+0x1a7/0x370
[ 8040.805652] worker_thread+0x1c9/0x380
[ 8040.805653] ? max_active_store+0x80/0x80
[ 8040.805655] kthread+0x112/0x130
[ 8040.805656] ? __kthread_parkme+0x70/0x70
[ 8040.805657] ret_from_fork+0x35/0x40
[ 8040.805658] ---[ end trace
b5f13b1e73ccb5d3 ]---
[ 8229.365135] BUG: kernel NULL pointer dereference, address:
0000000000000004
[ 8229.365165] #PF: supervisor read access in kernel mode
[ 8229.365178] #PF: error_code(0x0000) - not-present page
[ 8229.365191] PGD 0 P4D 0
[ 8229.365201] Oops: 0000 [#1] SMP PTI
[ 8229.365212] CPU: 77 PID: 13024 Comm: dd Kdump: loaded Tainted: G W 5.6.0-rc5.78317c+ #2
[ 8229.365232] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[ 8229.365253] RIP: 0010:blk_mq_get_tag+0x227/0x250
[ 8229.365265] Code: 44 24 04 44 01 e0 48 8b 74 24 38 65 48 33 34 25 28 00 00 00 75 33 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e c3 48 8d 68 10 4c 89 ef <44> 8b 60 04 48 89 ee e8 dd f9 ff ff 83 f8 ff 75 c8 e9 67 fe ff ff
[ 8229.365304] RSP: 0018:
ffffba590e977970 EFLAGS:
00010246
[ 8229.365317] RAX:
0000000000000000 RBX:
ffff9f00f6a79860 RCX:
ffffba590e977998
[ 8229.365333] RDX:
0000000000000000 RSI:
ffff9f012039b140 RDI:
ffffba590e977a38
[ 8229.365349] RBP:
0000000000000010 R08:
ffffda58ff94e190 R09:
ffffda58ff94e198
[ 8229.365365] R10:
0000000000000011 R11:
ffff9f00f6a79860 R12:
0000000000000000
[ 8229.365381] R13:
ffffba590e977a38 R14:
ffff9f012039b140 R15:
0000000000000001
[ 8229.365397] FS:
00007f481c230580(0000) GS:
ffff9f013f940000(0000) knlGS:
0000000000000000
[ 8229.365415] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8229.365428] CR2:
0000000000000004 CR3:
0000005f35e26004 CR4:
00000000007606e0
[ 8229.365444] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 8229.365460] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 8229.365476] PKRU:
55555554
[ 8229.365484] Call Trace:
[ 8229.365498] ? finish_wait+0x80/0x80
[ 8229.365512] blk_mq_get_request+0xcb/0x3f0
[ 8229.365525] blk_mq_make_request+0x143/0x5d0
[ 8229.365538] generic_make_request+0xcf/0x310
[ 8229.365553] ? scan_shadow_nodes+0x30/0x30
[ 8229.365564] submit_bio+0x3c/0x150
[ 8229.365576] mpage_readpages+0x163/0x1a0
[ 8229.365588] ? blkdev_direct_IO+0x490/0x490
[ 8229.365601] read_pages+0x6b/0x190
[ 8229.365612] __do_page_cache_readahead+0x1c1/0x1e0
[ 8229.365626] ondemand_readahead+0x182/0x2f0
[ 8229.365639] generic_file_buffered_read+0x590/0xab0
[ 8229.365655] new_sync_read+0x12a/0x1c0
[ 8229.365666] vfs_read+0x8a/0x140
[ 8229.365676] ksys_read+0x59/0xd0
[ 8229.365688] do_syscall_64+0x55/0x1d0
[ 8229.365700] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Erik Kaneda [Tue, 5 May 2020 00:46:52 +0000 (17:46 -0700)]
ACPICA: Dispatcher: add status checks
[ Upstream commit
6bfe5344b2956d0bee116f1c640aef05e5cddd76 ]
ACPICA commit
3244c1eeba9f9fb9ccedb875f7923a3d85e0c6aa
The status chekcs are used to to avoid NULL pointer dereference on
field objects
Link: https://github.com/acpica/acpica/commit/3244c1ee
Reported-by: Kurt Kennett <kurt_kennett@hotmail.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Wed, 6 May 2020 15:30:18 +0000 (18:30 +0300)]
spi: dw: Zero DMA Tx and Rx configurations on stack
[ Upstream commit
3cb97e223d277f84171cc4ccecab31e08b2ee7b5 ]
Some DMA controller drivers do not tolerate non-zero values in
the DMA configuration structures. Zero them to avoid issues with
such DMA controller drivers. Even despite above this is a good
practice per se.
Fixes:
7063c0d942a1 ("spi/dw_spi: add DMA support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dejin Zheng [Mon, 4 May 2020 08:34:42 +0000 (16:34 +0800)]
rtw88: fix an issue about leak system resources
[ Upstream commit
191f6b08bfef24e1a9641eaac96ed030a7be4599 ]
the related system resources were not released when pci_iomap() return
error in the rtw_pci_io_mapping() function. add pci_release_regions() to
fix it.
Fixes:
e3037485c68ec1a ("rtw88: new Realtek 802.11ac driver")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200504083442.3033-1-zhengdejin5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomasz Figa [Sat, 11 Apr 2020 17:37:10 +0000 (19:37 +0200)]
media: staging: ipu3: Fix stale list entries on parameter queue failure
[ Upstream commit
735a02f1bbc2c5e6e9cdbf0222948ff03ff7ab2d ]
When queuing parameters fails, current code bails out without deleting
the corresponding vb2 buffer from the driver buffer list, but the buffer
is returned to vb2. This leads to stale list entries and a crash when
the driver stops streaming:
[ 224.935561] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 224.998932] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.064430] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.128534] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.194945] ipu3-imgu 0000:00:05.0: set parameters failed.
[ 225.360363] ------------[ cut here ]------------
[ 225.360372] WARNING: CPU: 0 PID: 6704 at
drivers/media/common/videobuf2/videobuf2-core.c:927
vb2_buffer_done+0x20f/0x21a [videobuf2_common]
[ 225.360374] Modules linked in: snd_seq_dummy snd_seq snd_seq_device
veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp
nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput
ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common
videobuf2_dma_sg videobuf2_memops ov13858 ov5670 v4l2_fwnode dw9714
acpi_als xt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring
cros_ec_light_prox cros_ec_sensors cros_ec_sensors_core
industrialio_triggered_buffer kfifo_buf industrialio
cros_ec_sensorsupport cdc_ether btusb btrtl btintel btbcm usbnet
bluetooth ecdh_generic ecc hid_google_hammer iwlmvm iwl7000_mac80211
r8152 mii lzo_rle lzo_compress iwlwifi zram cfg80211 joydev
[ 225.360400] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G
C 5.4.30 #5
[ 225.360402] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[ 225.360405] RIP: 0010:vb2_buffer_done+0x20f/0x21a [videobuf2_common]
[ 225.360408] Code: 5e 41 5f 5d e9 e0 16 5a d4 41 8b 55 08 48 c7 c7 8f
8b 5c c0 48 c7 c6 36 9a 5c c0 44 89 f9 31 c0 e8 a5 1c 5b d4 e9 53 fe ff
ff <0f> 0b eb a3 e8 12 d7 43 d4 eb 97 0f 1f 44 00 00 55 48 89 e5 41 56
[ 225.360410] RSP: 0018:
ffff9468ab32fba8 EFLAGS:
00010297
[ 225.360412] RAX:
ffff8aa7a51577a8 RBX:
dead000000000122 RCX:
ffff8aa7a51577a8
[ 225.360414] RDX:
0000000000000000 RSI:
0000000000000006 RDI:
ffff8aa7a5157400
[ 225.360416] RBP:
ffff9468ab32fbd8 R08:
ffff8aa64e47e600 R09:
0000000000000000
[ 225.360418] R10:
0000000000000000 R11:
ffffffffc06036e6 R12:
dead000000000100
[ 225.360420] R13:
ffff8aa7820f1940 R14:
ffff8aa7a51577a8 R15:
0000000000000006
[ 225.360422] FS:
00007c1146ffd700(0000) GS:
ffff8aa7baa00000(0000)
knlGS:
0000000000000000
[ 225.360424] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 225.360426] CR2:
00007aea3473a000 CR3:
00000000537d6004 CR4:
00000000003606f0
[ 225.360427] Call Trace:
[ 225.360434] imgu_return_all_buffers+0x6f/0x8e [ipu3_imgu]
[ 225.360438] imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu]
[ 225.360441] __vb2_queue_cancel+0x33/0x22d [videobuf2_common]
[ 225.360443] vb2_core_streamoff+0x16/0x78 [videobuf2_common]
[ 225.360448] __video_do_ioctl+0x33d/0x42a
[ 225.360452] video_usercopy+0x34a/0x615
[ 225.360455] ? video_ioctl2+0x16/0x16
[ 225.360458] v4l2_ioctl+0x46/0x53
[ 225.360462] do_vfs_ioctl+0x50a/0x787
[ 225.360465] ksys_ioctl+0x58/0x83
[ 225.360468] __x64_sys_ioctl+0x1a/0x1e
[ 225.360470] do_syscall_64+0x54/0x68
[ 225.360474] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 225.360476] RIP: 0033:0x7c118030f497
[ 225.360479] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48
[ 225.360480] RSP: 002b:
00007c1146ffa5a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 225.360483] RAX:
ffffffffffffffda RBX:
00007c1140010018 RCX:
00007c118030f497
[ 225.360484] RDX:
00007c114001019c RSI:
0000000040045613 RDI:
000000000000004c
[ 225.360486] RBP:
00007c1146ffa700 R08:
00007c1140010048 R09:
0000000000000000
[ 225.360488] R10:
0000000000000000 R11:
0000000000000246 R12:
00007c11400101b0
[ 225.360489] R13:
00007c1140010200 R14:
00007c1140010048 R15:
0000000000000001
[ 225.360492] ---[ end trace
73625ecfbd1c930e ]---
[ 225.360498] general protection fault: 0000 [#1] PREEMPT SMP PTI
[ 225.360501] CPU: 0 PID: 6704 Comm: CameraDeviceOps Tainted: G
WC 5.4.30 #5
[ 225.360502] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[ 225.360505] RIP: 0010:imgu_return_all_buffers+0x52/0x8e [ipu3_imgu]
[ 225.360507] Code: d4 49 8b 85 70 0a 00 00 49 81 c5 70 0a 00 00 49 39
c5 74 3b 49 bc 00 01 00 00 00 00 ad de 49 8d 5c 24 22 4c 8b 30 48 8b 48
08 <49> 89 4e 08 4c 89 31 4c 89 20 48 89 58 08 48 8d b8 58 fc ff ff 44
[ 225.360509] RSP: 0018:
ffff9468ab32fbe8 EFLAGS:
00010293
[ 225.360511] RAX:
ffff8aa7a51577a8 RBX:
dead000000000122 RCX:
dead000000000122
[ 225.360512] RDX:
0000000000000000 RSI:
0000000000000006 RDI:
ffff8aa7a5157400
[ 225.360514] RBP:
ffff9468ab32fc18 R08:
ffff8aa64e47e600 R09:
0000000000000000
[ 225.360515] R10:
0000000000000000 R11:
ffffffffc06036e6 R12:
dead000000000100
[ 225.360517] R13:
ffff8aa7820f1940 R14:
dead000000000100 R15:
0000000000000006
[ 225.360519] FS:
00007c1146ffd700(0000) GS:
ffff8aa7baa00000(0000)
knlGS:
0000000000000000
[ 225.360521] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 225.360523] CR2:
00007aea3473a000 CR3:
00000000537d6004 CR4:
00000000003606f0
[ 225.360525] Call Trace:
[ 225.360528] imgu_vb2_stop_streaming+0xd6/0xf0 [ipu3_imgu]
[ 225.360531] __vb2_queue_cancel+0x33/0x22d [videobuf2_common]
[ 225.360534] vb2_core_streamoff+0x16/0x78 [videobuf2_common]
[ 225.360537] __video_do_ioctl+0x33d/0x42a
[ 225.360540] video_usercopy+0x34a/0x615
[ 225.360542] ? video_ioctl2+0x16/0x16
[ 225.360546] v4l2_ioctl+0x46/0x53
[ 225.360548] do_vfs_ioctl+0x50a/0x787
[ 225.360551] ksys_ioctl+0x58/0x83
[ 225.360554] __x64_sys_ioctl+0x1a/0x1e
[ 225.360556] do_syscall_64+0x54/0x68
[ 225.360559] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 225.360561] RIP: 0033:0x7c118030f497
[ 225.360563] Code: 8a 66 90 48 8b 05 d1 d9 2b 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 d9 2b 00 f7 d8 64 89 01 48
[ 225.360565] RSP: 002b:
00007c1146ffa5a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 225.360567] RAX:
ffffffffffffffda RBX:
00007c1140010018 RCX:
00007c118030f497
[ 225.360569] RDX:
00007c114001019c RSI:
0000000040045613 RDI:
000000000000004c
[ 225.360570] RBP:
00007c1146ffa700 R08:
00007c1140010048 R09:
0000000000000000
[ 225.360572] R10:
0000000000000000 R11:
0000000000000246 R12:
00007c11400101b0
[ 225.360574] R13:
00007c1140010200 R14:
00007c1140010048 R15:
0000000000000001
[ 225.360576] Modules linked in: snd_seq_dummy snd_seq snd_seq_device
veth bridge stp llc tun nf_nat_tftp nf_conntrack_tftp nf_nat_ftp
nf_conntrack_ftp esp6 ah6 ip6t_REJECT ip6t_ipv6header cmac rfcomm uinput
ipu3_imgu(C) ipu3_cio2 iova videobuf2_v4l2 videobuf2_common
videobuf2_dma_sg videobuf2_memops ov13858 ov567
Fix this by moving the list_del() call just below the list_first_entry()
call when the buffer no longer needs to be in the list.
Fixes:
8ecc7c9da013 ("media: staging/intel-ipu3: parameter buffer refactoring")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Thompson [Mon, 4 May 2020 17:05:18 +0000 (18:05 +0100)]
arm64: cacheflush: Fix KGDB trap detection
[ Upstream commit
ab8ad279ceac4fc78ae4dcf1a26326e05695e537 ]
flush_icache_range() contains a bodge to avoid issuing IPIs when the kgdb
trap handler is running because issuing IPIs is unsafe (and not needed)
in this execution context. However the current test, based on
kgdb_connected is flawed: it both over-matches and under-matches.
The over match occurs because kgdb_connected is set when gdb attaches
to the stub and remains set during normal running. This is relatively
harmelss because in almost all cases irq_disabled() will be false.
The under match is more serious. When kdb is used instead of kgdb to access
the debugger then kgdb_connected is not set in all the places that the
debug core updates sw breakpoints (and hence flushes the icache). This
can lead to deadlock.
Fix by replacing the ad-hoc check with the proper kgdb macro. This also
allows us to drop the #ifdef wrapper.
Fixes:
3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504170518.2959478-1-daniel.thompson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Gong [Mon, 4 May 2020 09:03:14 +0000 (12:03 +0300)]
ath10k: remove the max_sched_scan_reqs value
[ Upstream commit
d431f8939c1419854dfe89dd345387f5397c6edd ]
The struct cfg80211_wowlan of NET_DETECT WoWLAN feature share the same
struct cfg80211_sched_scan_request together with scheduled scan request
feature, and max_sched_scan_reqs of wiphy is only used for sched scan,
and ath10k does not support scheduled scan request feature, so ath10k
does not set flag NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR, but ath10k
set max_sched_scan_reqs of wiphy to a non zero value 1, then function
nl80211_add_commands_unsplit of cfg80211 will set it support command
NL80211_CMD_START_SCHED_SCAN because max_sched_scan_reqs is a non zero
value, but actually ath10k not support it, then it leads a mismatch result
for sched scan of cfg80211, then application shill found the mismatch and
stop running case of MAC random address scan and then the case fail.
After remove max_sched_scan_reqs value, it keeps match for sched scan and
case of MAC random address scan pass.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Tested with QCA6174 PCIe with firmware WLAN.RM.4.4.1-00110-QCARMSWP-1.
Fixes:
ce834e280f2f875 ("ath10k: support NET_DETECT WoWLAN feature")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20191114050001.4658-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Mon, 4 May 2020 08:06:29 +0000 (10:06 +0200)]
efi/libstub/x86: Work around LLVM ELF quirk build regression
[ Upstream commit
f77767ed5f4d398b29119563155e4ece2dfeee13 ]
When building the x86 EFI stub with Clang, the libstub Makefile rules
that manipulate the ELF object files may throw an error like:
STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o
strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
This is the result of a LLVM feature [0] where symbol references are
stored in a LLVM specific .llvm_addrsig section in a non-transparent way,
causing generic ELF tools such as strip or objcopy to choke on them.
So force the compiler not to emit these sections, by passing the
appropriate command line option.
[0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arthur Kiyanovski [Sun, 3 May 2020 09:52:11 +0000 (09:52 +0000)]
net: ena: fix error returning in ena_com_get_hash_function()
[ Upstream commit
e9a1de378dd46375f9abfd8de1e6f59ee114a793 ]
In case the "func" parameter is NULL we now return "-EINVAL".
This shouldn't happen in general, but when it does happen, this is the
proper way to handle it.
We also check func for NULL in the beginning of the function, as there
is no reason to do all the work and realize in the end of the function
it was useless.
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Starovoytov [Thu, 30 Apr 2020 08:04:34 +0000 (11:04 +0300)]
net: atlantic: make hw_get_regs optional
[ Upstream commit
d0f23741c202c685447050713907f3be39a985ee ]
This patch fixes potential crash in case if hw_get_regs is NULL.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huaixin Chang [Mon, 20 Apr 2020 02:44:21 +0000 (10:44 +0800)]
sched/fair: Refill bandwidth before scaling
[ Upstream commit
5a6d6a6ccb5f48ca8cf7c6d64ff83fd9c7999390 ]
In order to prevent possible hardlockup of sched_cfs_period_timer()
loop, loop count is introduced to denote whether to scale quota and
period or not. However, scale is done between forwarding period timer
and refilling cfs bandwidth runtime, which means that period timer is
forwarded with old "period" while runtime is refilled with scaled
"quota".
Move do_sched_cfs_period_timer() before scaling to solve this.
Fixes:
2e8e19226398 ("sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup")
Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200420024421.22442-3-changhuaixin@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Tue, 28 Apr 2020 17:57:59 +0000 (19:57 +0200)]
x86,smap: Fix smap_{save,restore}() alternatives
[ Upstream commit
1ff865e343c2b59469d7e41d370a980a3f972c71 ]
As reported by objtool:
lib/ubsan.o: warning: objtool: .altinstr_replacement+0x0: alternative modifies stack
lib/ubsan.o: warning: objtool: .altinstr_replacement+0x7: alternative modifies stack
the smap_{save,restore}() alternatives violate (the newly enforced)
rule on stack invariance. That is, due to there only being a single
ORC table it must be valid to any alternative. These alternatives
violate this with the direct result that unwinds will not be correct
when it hits between the PUSH and POP instructions.
Rewrite the functions to only have a conditional jump.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200429101802.GI13592@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evan Green [Mon, 27 Apr 2020 23:32:48 +0000 (16:32 -0700)]
spi: pxa2xx: Apply CS clk quirk to BXT
[ Upstream commit
6eefaee4f2d366a389da0eb95e524ba82bf358c4 ]
With a couple allies at Intel, and much badgering, I got confirmation
from Intel that at least BXT suffers from the same SPI chip-select
issue as Cannonlake (and beyond). The issue being that after going
through runtime suspend/resume, toggling the chip-select line without
also sending data does nothing.
Add the quirk to BXT to briefly toggle dynamic clock gating off and
on, forcing the fabric to wake up enough to notice the CS register
change.
Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: Shobhit Srivastava <shobhit.srivastava@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034cb3c8804@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Wed, 29 Apr 2020 01:21:04 +0000 (18:21 -0700)]
libbpf: Fix memory leak and possible double-free in hashmap__clear
[ Upstream commit
229bf8bf4d910510bc1a2fd0b89bd467cd71050d ]
Fix memory leak in hashmap_clear() not freeing hashmap_entry structs for each
of the remaining entries. Also NULL-out bucket list to prevent possible
double-free between hashmap__clear() and hashmap__free().
Running test_progs-asan flavor clearly showed this problem.
Reported-by: Alston Tang <alston64@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-5-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gavin Shan [Mon, 27 Apr 2020 23:57:00 +0000 (09:57 +1000)]
arm64/kernel: Fix range on invalidating dcache for boot page tables
[ Upstream commit
9d2d75ede59bc1edd8561f2ee9d4702a5ea0ae30 ]
Prior to commit
8eb7e28d4c642c31 ("arm64/mm: move runtime pgds to
rodata"), idmap_pgd_dir, tramp_pg_dir, reserved_ttbr0, swapper_pg_dir,
and init_pg_dir were contiguous at the end of the kernel image. The
maintenance at the end of __create_page_tables assumed these were
contiguous, and affected everything from the start of idmap_pg_dir
to the end of init_pg_dir.
That commit moved all but init_pg_dir into the .rodata section, with
other data placed between idmap_pg_dir and init_pg_dir, but did not
update the maintenance. Hence the maintenance is performed on much
more data than necessary (but as the bootloader previously made this
clean to the PoC there is no functional problem).
As we only alter idmap_pg_dir, and init_pg_dir, we only need to perform
maintenance for these. As the other dirs are in .rodata, the bootloader
will have initialised them as expected and cleaned them to the PoC. The
kernel will initialize them as necessary after enabling the MMU.
This patch reworks the maintenance to only cover the idmap_pg_dir and
init_pg_dir to avoid this unnecessary work.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200427235700.112220-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>