review.tizen.org Git - platform/kernel/linux-starfive.git/log

tcp: annotate data races in __tcp_oow_rate_limited()

[ Upstream commit 998127cdb4699b9d470a9348ffe9f1154346be5f ]

request sockets are lockless, __tcp_oow_rate_limited() could be called
on the same object from different cpus. This is harmless.

Add READ_ONCE()/WRITE_ONCE() annotations to avoid a KCSAN report.

Fixes: 4ce7e93cb3fe ("tcp: rate limit ACK sent by SYN_RECV request sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix net_dev_start_xmit trace event vs skb_transport_offset()

[ Upstream commit f88fcb1d7d961b4b402d675109726f94db87571c ]

After blamed commit, we must be more careful about using
skb_transport_offset(), as reminded us by syzbot:

WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline]
WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14
Modules linked in:
CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline]
RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14
Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff
RSP: 0018:ffffc900002bf700 EFLAGS: 00010293
RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280
RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff
RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e
R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67
R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline]
[<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline]
[<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660
[<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline]
[<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108
[<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
[<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
[<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
[<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701
[<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289
[<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436

Fixes: 66e4c8d95008 ("net: warn if transport header was not set")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: tag_sja1105: fix source port decoding in vlan_filtering=0 bridge mode

[ Upstream commit a398b9ea0c3b791b7a0f4c6029a62cf628f97f22 ]

There was a regression introduced by the blamed commit, where pinging to
a VLAN-unaware bridge would fail with the repeated message "Couldn't
decode source port" coming from the tagging protocol driver.

When receiving packets with a bridge_vid as determined by
dsa_tag_8021q_bridge_join(), dsa_8021q_rcv() will decode:
- source_port = 0 (which isn't really valid, more like "don't know")
- switch_id = 0 (which isn't really valid, more like "don't know")
- vbid = value in range 1-7

Since the blamed patch has reversed the order of the checks, we are now
going to believe that source_port != -1 and switch_id != -1, so they're
valid, but they aren't.

The minimal solution to the problem is to only populate source_port and
switch_id with what dsa_8021q_rcv() came up with, if the vbid is zero,
i.e. the source port information is trustworthy.

Fixes: c1ae02d87689 ("net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: keep ports without IFF_UNICAST_FLT in BR_PROMISC mode

[ Upstream commit 6ca3c005d0604e8d2b439366e3923ea58db99641 ]

According to the synchronization rules for .ndo_get_stats() as seen in
Documentation/networking/netdevices.rst, acquiring a plain spin_lock()
should not be illegal, but the bridge driver implementation makes it so.

After running these commands, I am being faced with the following
lockdep splat:

$ ip link add link swp0 name macsec0 type macsec encrypt on && ip link set swp0 up
$ ip link add dev br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set macsec0 master br0 && ip link set macsec0 up

  ========================================================
  WARNING: possible irq lock inversion dependency detected
  6.4.0-04295-g31b577b4bd4a #603 Not tainted
  --------------------------------------------------------
  swapper/1/0 just changed the state of lock:
  ffff6bd348724cd8 (&br->lock){+.-.}-{3:3}, at: br_forward_delay_timer_expired+0x34/0x198
  but this lock took another, SOFTIRQ-unsafe lock in the past:
   (&ocelot->stats_lock){+.+.}-{3:3}

  and interrupts could create inverse lock ordering between them.

  other info that might help us debug this:
  Chain exists of:
    &br->lock --> &br->hash_lock --> &ocelot->stats_lock

   Possible interrupt unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&ocelot->stats_lock);
                                 local_irq_disable();
                                 lock(&br->lock);
                                 lock(&br->hash_lock);
    <Interrupt>
      lock(&br->lock);

   *** DEADLOCK ***

(details about the 3 locks skipped)

swp0 is instantiated by drivers/net/dsa/ocelot/felix.c, and this
only matters to the extent that its .ndo_get_stats64() method calls
spin_lock(&ocelot->stats_lock).

Documentation/locking/lockdep-design.rst says:

| A lock is irq-safe means it was ever used in an irq context, while a lock
| is irq-unsafe means it was ever acquired with irq enabled.

(...)

| Furthermore, the following usage based lock dependencies are not allowed
| between any two lock-classes::
|
|    <hardirq-safe>   ->  <hardirq-unsafe>
|    <softirq-safe>   ->  <softirq-unsafe>

Lockdep marks br->hash_lock as softirq-safe, because it is sometimes
taken in softirq context (for example br_fdb_update() which runs in
NET_RX softirq), and when it's not in softirq context it blocks softirqs
by using spin_lock_bh().

Lockdep marks ocelot->stats_lock as softirq-unsafe, because it never
blocks softirqs from running, and it is never taken from softirq
context. So it can always be interrupted by softirqs.

There is a call path through which a function that holds br->hash_lock:
fdb_add_hw_addr() will call a function that acquires ocelot->stats_lock:
ocelot_port_get_stats64(). This can be seen below:

ocelot_port_get_stats64+0x3c/0x1e0
felix_get_stats64+0x20/0x38
dsa_slave_get_stats64+0x3c/0x60
dev_get_stats+0x74/0x2c8
rtnl_fill_stats+0x4c/0x150
rtnl_fill_ifinfo+0x5cc/0x7b8
rtmsg_ifinfo_build_skb+0xe4/0x150
rtmsg_ifinfo+0x5c/0xb0
__dev_notify_flags+0x58/0x200
__dev_set_promiscuity+0xa0/0x1f8
dev_set_promiscuity+0x30/0x70
macsec_dev_change_rx_flags+0x68/0x88
__dev_set_promiscuity+0x1a8/0x1f8
__dev_set_rx_mode+0x74/0xa8
dev_uc_add+0x74/0xa0
fdb_add_hw_addr+0x68/0xd8
fdb_add_local+0xc4/0x110
br_fdb_add_local+0x54/0x88
br_add_if+0x338/0x4a0
br_add_slave+0x20/0x38
do_setlink+0x3a4/0xcb8
rtnl_newlink+0x758/0x9d0
rtnetlink_rcv_msg+0x2f0/0x550
netlink_rcv_skb+0x128/0x148
rtnetlink_rcv+0x24/0x38

the plain English explanation for it is:

The macsec0 bridge port is created without p->flags & BR_PROMISC,
because it is what br_manage_promisc() decides for a VLAN filtering
bridge with a single auto port.

As part of the br_add_if() procedure, br_fdb_add_local() is called for
the MAC address of the device, and this results in a call to
dev_uc_add() for macsec0 while the softirq-safe br->hash_lock is taken.

Because macsec0 does not have IFF_UNICAST_FLT, dev_uc_add() ends up
calling __dev_set_promiscuity() for macsec0, which is propagated by its
implementation, macsec_dev_change_rx_flags(), to the lower device: swp0.
This triggers the call path:

dev_set_promiscuity(swp0)
-> rtmsg_ifinfo()
   -> dev_get_stats()
      -> ocelot_port_get_stats64()

with a calling context that lockdep doesn't like (br->hash_lock held).

Normally we don't see this, because even though many drivers that can be
bridge ports don't support IFF_UNICAST_FLT, we need a driver that

(a) doesn't support IFF_UNICAST_FLT, *and*
(b) it forwards the IFF_PROMISC flag to another driver, and
(c) *that* driver implements ndo_get_stats64() using a softirq-unsafe
    spinlock.

Condition (b) is necessary because the first __dev_set_rx_mode() calls
__dev_set_promiscuity() with "bool notify=false", and thus, the
rtmsg_ifinfo() code path won't be entered.

The same criteria also hold true for DSA switches which don't report
IFF_UNICAST_FLT. When the DSA master uses a spin_lock() in its
ndo_get_stats64() method, the same lockdep splat can be seen.

I think the deadlock possibility is real, even though I didn't reproduce
it, and I'm thinking of the following situation to support that claim:

fdb_add_hw_addr() runs on a CPU A, in a context with softirqs locally
disabled and br->hash_lock held, and may end up attempting to acquire
ocelot->stats_lock.

In parallel, ocelot->stats_lock is currently held by a thread B (say,
ocelot_check_stats_work()), which is interrupted while holding it by a
softirq which attempts to lock br->hash_lock.

Thread B cannot make progress because br->hash_lock is held by A. Whereas
thread A cannot make progress because ocelot->stats_lock is held by B.

When taking the issue at face value, the bridge can avoid that problem
by simply making the ports promiscuous from a code path with a saner
calling context (br->hash_lock not held). A bridge port without
IFF_UNICAST_FLT is going to become promiscuous as soon as we call
dev_uc_add() on it (which we do unconditionally), so why not be
preemptive and make it promiscuous right from the beginning, so as to
not be taken by surprise.

With this, we've broken the links between code that holds br->hash_lock
or br->lock and code that calls into the ndo_change_rx_flags() or
ndo_get_stats64() ops of the bridge port.

Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node

[ Upstream commit abaa02fc944f2f9f2c2e1925ddaceaf35c48528c ]

Freescale PCIe controllers on their PCIe Root Ports do not have any
mappable PCI BAR allocate from PCIe MEM.

Information about 1MB window on BAR0 of PCIe Root Port was misleading
because Freescale PCIe controllers have at BAR0 position different register
PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root
Ports.

So update comment about P2020 PCIe Root Port and decrease PCIe MEM size
required for PCIe controller (pci2 node) on which is on-board xHCI
controller.

lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem
sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.

Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505172818.18416-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y

[ Upstream commit 39f49684036d24af800ff194c33c7b2653c591d7 ]

In a randconfig with CONFIG_SERIAL_CPM=m and
CONFIG_PPC_EARLY_DEBUG_CPM=y, there is a build error:
ERROR: modpost: "udbg_putc" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!

Prevent the build error by allowing PPC_EARLY_DEBUG_CPM only when
SERIAL_CPM=y.

Fixes: c374e00e17f1 ("[POWERPC] Add early debug console for CPM serial ports.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230701054714.30512-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr()

[ Upstream commit 3c675ddffb17a8b1e32efad5c983254af18b12c2 ]

Here is a BUG report from syzbot:

BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632

Call Trace:
ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
vfs_listxattr fs/xattr.c:457 [inline]
listxattr+0x293/0x2d0 fs/xattr.c:804

Fix the logic of ea_all iteration. When the ea->name_len is 0,
return immediately, or Add2Ptr() would visit invalid memory
in the next loop.

Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Reported-by: syzbot+9fcea5ef6dc4dc72d334@syzkaller.appspotmail.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
[almaz.alexandrovich@paragon-software.com: lines of the patch have changed]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Add validation before accessing cgx and lmac

[ Upstream commit 79ebb53772c95d3a6ae51b3c65f9985fdd430df6 ]

with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.

This patch fixes the issue by adding proper checks.

[   23.219150] pc : cgx_lmac_read+0x38/0x70
[   23.219154] lr : rvu_program_channels+0x3f0/0x498
[   23.223852] sp : ffff000100d6fc80
[   23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[   23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000

Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix mapping for NIX block from CGX connection

[ Upstream commit 2e7bc57b976bb016c6569a54d95c1b8d88f9450a ]

Firmware configures NIX block mapping for all MAC blocks.
The current implementation reads the configuration and
creates the mapping between RVU PF and NIX blocks. But
this configuration is only valid for silicons that support
multiple blocks. For all other silicons, all MAC blocks
map to NIX0.

This patch corrects the mapping by adding a check for the same.

Fixes: c5a73b632b90 ("octeontx2-af: Map NIX block from CGX connection")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix error path handling in truncate_dnode()

[ Upstream commit 0135c482fa97e2fd8245cb462784112a00ed1211 ]

If truncate_node() fails in truncate_dnode(), it missed to call
f2fs_put_page(), fix it.

Fixes: 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0

[ Upstream commit 1b712f18c461bd75f018033a15cf381e712806b5 ]

Sec proxy/message manager data buffer is 60 bytes with the last of the
registers indicating transmission completion. This however poses a bit
of a challenge.

The backing memory for sec_proxy / message manager is regular memory,
and all sec proxy does is to trigger a burst of all 60 bytes of data
over to the target thread backing ring accelerator. It doesn't do a
memory scrub when it moves data out in the burst. When we transmit
multiple messages, remnants of previous message is also transmitted
which results in some random data being set in TISCI fields of
messages that have been expanded forward.

The entire concept of backward compatibility hinges on the fact that
the unused message fields remain 0x0 allowing for 0x0 value to be
specially considered when backward compatibility of message extension
is done.

So, instead of just writing the completion register, we continue
to fill the message buffer up with 0x0 (note: for partial message
involving completion, we already do this).

This allows us to scale and introduce ABI changes back also work with
other boot stages that may have left data in the internal memory.

While at this, be consistent and explicit with the data_reg pointer
increment.

Fixes: aace66b170ce ("mailbox: Introduce TI message manager driver")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd: Don't try to enable secure display TA multiple times

[ Upstream commit 5c6d52ff4b61e5267b25be714eb5a9ba2a338199 ]

If the securedisplay TA failed to load the first time, it's unlikely
to work again after a suspend/resume cycle or reset cycle and it appears
to be causing problems in futher attempts.

Fixes: e42dfa66d592 ("drm/amdgpu: Add secure display TA load for Renoir")
Reported-by: Filip Hejsek <filip.hejsek@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2633
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix number of fence calculations

[ Upstream commit 570b295248b00c3cf4cf59e397de5cb2361e10c2 ]

Since adding gang submit we need to take the gang size into account
while reserving fences.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm-qspi: return error if neither hif_mspi nor mspi is available

[ Upstream commit 7c1f23ad34fcdace50275a6aa1e1969b41c6233f ]

If neither a "hif_mspi" nor "mspi" resource is present, the driver will
just early exit in probe but still return success. Apart from not doing
anything meaningful, this would then also lead to a null pointer access
on removal, as platform_get_drvdata() would return NULL, which it would
then try to dereference when trying to unregister the spi master.

Fix this by unconditionally calling devm_ioremap_resource(), as it can
handle a NULL res and will then return a viable ERR_PTR() if we get one.

The "return 0;" was previously a "goto qspi_resource_err;" where then
ret was returned, but since ret was still initialized to 0 at this place
this was a valid conversion in 63c5395bb7a9 ("spi: bcm-qspi: Fix
use-after-free on unbind"). The issue was not introduced by this commit,
only made more obvious.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Link: https://lore.kernel.org/r/20230629134306.95823-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_init

[ Upstream commit 08fc75735fda3be97194bfbf3c899c87abb3d0fe ]

The line cards array is not freed in the error path of
mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by
freeing the array in the error path, thereby making the error path
identical to mlxsw_m_linecards_fini().

Fixes: 01328e23a476 ("mlxsw: minimal: Extend module to port mapping with slot index")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230630012647.1078002-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: vsc73xx: fix MTU configuration

[ Upstream commit 3cf62c8177adb0db9e15c8b898c44f997acf3ebf ]

Switch in MAXLEN register stores the maximum size of a data frame.
The MTU size is 18 bytes smaller than the frame size.

The current settings are causing problems with packet forwarding.
This patch fixes the MTU settings to proper values.

Fixes: fb77ffc6ec86 ("net: dsa: vsc73xx: make the MTU configurable")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230628194327.1765644-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Do not reset dql stats on NON_FATAL err

[ Upstream commit 48538ccb825b05544ec308a509e2cc9c013402db ]

All ibmvnic resets, make a call to netdev_tx_reset_queue() when
re-opening the device. netdev_tx_reset_queue() resets the num_queued
and num_completed byte counters. These stats are used in Byte Queue
Limit (BQL) algorithms. The difference between these two stats tracks
the number of bytes currently sitting on the physical NIC. ibmvnic
increases the number of queued bytes though calls to
netdev_tx_sent_queue() in the drivers xmit function. When, VIOS reports
that it is done transmitting bytes, the ibmvnic device increases the
number of completed bytes through calls to netdev_tx_completed_queue().
It is important to note that the driver batches its transmit calls and
num_queued is increased every time that an skb is added to the next
batch, not necessarily when the batch is sent to VIOS for transmission.

Unlike other reset types, a NON FATAL reset will not flush the sub crq
tx buffers. Therefore, it is possible for the batched skb array to be
partially full. So if there is call to netdev_tx_reset_queue() when
re-opening the device, the value of num_queued (0) would not account
for the skb's that are currently batched. Eventually, when the batch
is sent to VIOS, the call to netdev_tx_completed_queue() would increase
num_completed to a value greater than the num_queued. This causes a
BUG_ON crash:

ibmvnic 30000002: Firmware reports error, cause: adapter problem.
Starting recovery...
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:27!
Oops: Exception in kernel mode, sig: 5
[....]
NIP dql_completed+0x28/0x1c0
LR ibmvnic_complete_tx.isra.0+0x23c/0x420 [ibmvnic]
Call Trace:
ibmvnic_complete_tx.isra.0+0x3f8/0x420 [ibmvnic] (unreliable)
ibmvnic_interrupt_tx+0x40/0x70 [ibmvnic]
__handle_irq_event_percpu+0x98/0x270
---[ end trace ]---

Therefore, do not reset the dql stats when performing a NON_FATAL reset.

Fixes: 0d973388185d ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: MGMT: Fix marking SCAN_RSP as not connectable

[ Upstream commit 73f55453ea5236a586a7f1b3d5e2ee051d655351 ]

When receiving a scan response there is no way to know if the remote
device is connectable or not, so when it cannot be merged don't
make any assumption and instead just mark it with a new flag defined as
MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone
SCAN_RSP.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/
Fixes: c70a7e4cc8d2 ("Bluetooth: Add support for Not Connectable flag for Device Found events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: MGMT: Use BIT macro when defining bitfields

[ Upstream commit a80d2c545ded86d0350b9a870735565d8b749786 ]

This makes use of BIT macro when defining bitfields which makes it
clearer what bit it is toggling.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 73f55453ea52 ("Bluetooth: MGMT: Fix marking SCAN_RSP as not connectable")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: MGMT: add CIS feature bits to controller information

[ Upstream commit 2394186a2cefb9a45a029281a55749804dd8c556 ]

Userspace needs to know whether the adapter has feature support for
Connected Isochronous Stream - Central/Peripheral, so it can set up
LE Audio features accordingly.

Expose these feature bits as settings in MGMT controller info.

Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 73f55453ea52 ("Bluetooth: MGMT: Fix marking SCAN_RSP as not connectable")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: ISO: use hci_sync for setting CIG parameters

[ Upstream commit 6b9545dc9f8ff01d8bc1229103960d9cd265343f ]

When reconfiguring CIG after disconnection of the last CIS, LE Remove
CIG shall be sent before LE Set CIG Parameters. Otherwise, it fails
because CIG is in the inactive state and not configurable (Core v5.3
Vol 6 Part B Sec. 4.5.14.3). This ordering is currently wrong under
suitable timing conditions, because LE Remove CIG is sent via the
hci_sync queue and may be delayed, but Set CIG Parameters is via
hci_send_cmd.

Make the ordering well-defined by sending also Set CIG Parameters via
hci_sync.

Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: fix invalid-bdaddr quirk for non-persistent setup

[ Upstream commit 0cb7365850bacb8c2a9975cae672d65714d8daa1 ]

Devices that lack persistent storage for the device address can indicate
this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
to be marked as unconfigured until user space has set a valid address.

Once configured, the device address must be set on every setup for
controllers with HCI_QUIRK_NON_PERSISTENT_SETUP to avoid marking the
controller as unconfigured and requiring the address to be set again.

Fixes: 740011cfe948 ("Bluetooth: Add new quirk for non-persistent setup settings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Add MODULE_FIRMWARE() for FIRMWARE_TG357766.

[ Upstream commit 046f753da6143ee16452966915087ec8b0de3c70 ]

Fixes a bug where on the M1 mac mini initramfs-tools fails to
include the necessary firmware into the initrd.

Fixes: c4dab50697ff ("tg3: Download 57766 EEE service patch firmware")
Signed-off-by: Tobias Heider <me@tobhe.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/ZJt7LKzjdz8+dClx@tobhe.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT

[ Upstream commit c1ae02d876898b1b8ca1e12c6f84d7b406263800 ]

Currently the sja1105 tagging protocol prefers using the source port
information from the VLAN header if that is available, falling back to
the INCL_SRCPT option if it isn't. The VLAN header is available for all
frames except for META frames initiated by the switch (containing RX
timestamps), and thus, the "if (is_link_local)" branch is practically
dead.

The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port. With incorrect
source port reporting, for example PTP traffic over 2 bridged ports will
all be seen on sockets opened on the first such port, which is incorrect.

Now that the tagging protocol has been changed to make link-local frames
always contain source port information, we can reverse the order of the
checks so that we always give precedence to that information (which is
always precise) in lieu of the tag_8021q VID which is only precise for a
standalone port.

Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: always enable the INCL_SRCPT option

[ Upstream commit b4638af8885af93cd70351081da1909c59342440 ]

Link-local traffic on bridged SJA1105 ports is sometimes tagged by the
hardware with source port information (when the port is under a VLAN
aware bridge).

The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port.

Modify the driver logic (and therefore: the tagging protocol itself) to
always include the source port information with link-local packets,
regardless of whether the port is standalone, under a VLAN-aware or
VLAN-unaware bridge. This makes it possible for the tagging driver to
give priority to that information over the tag_8021q VLAN header.

The big drawback with INCL_SRCPT is that it makes it impossible to
distinguish between an original MAC DA of 01:80:C2:XX:YY:ZZ and
01:80:C2:AA:BB:ZZ, because the tagger just patches MAC DA bytes 3 and 4
with zeroes. Only if PTP RX timestamping is enabled, the switch will
generate a META follow-up frame containing the RX timestamp and the
original bytes 3 and 4 of the MAC DA. Those will be used to patch up the
original packet. Nonetheless, in the absence of PTP RX timestamping, we
have to live with this limitation, since it is more important to have
the more precise source port information for link-local traffic.

Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: felix: don't drop PTP frames with tag_8021q when RX timestamping is disabled

[ Upstream commit 2edcfcbb3c5946609be1d8875473a240b170673b ]

The driver implements a workaround for the fact that it doesn't have an
IRQ source to tell it whether PTP frames are available through the
extraction registers, for those frames to be processed and passed
towards the network stack. That workaround is to configure the switch,
through felix_hwtstamp_set() -> felix_update_trapping_destinations(),
to create two copies of PTP packets: one sent over Ethernet to the DSA
master, and one to be consumed through the aforementioned CPU extraction
queue registers.

The reason why we want PTP packets to be consumed through the CPU
extraction registers in the first place is because we want to see their
hardware RX timestamp. With tag_8021q, that is only visible that way,
and it isn't visible with the copy of the packet that's transmitted over
Ethernet.

The problem with the workaround implementation is that it drops the
packet received over Ethernet, in expectation of its copy being present
in the CPU extraction registers. However, if felix_hwtstamp_set() hasn't
run (aka PTP RX timestamping is disabled), the driver will drop the
original PTP frame and there will be no copy of it in the CPU extraction
registers. So, the network stack will simply not see any PTP frame.

Look at the port's trapping configuration to see whether the driver has
previously enabled the CPU extraction registers. If it hasn't, just
don't RX timestamp the frame and let it be passed up the stack by DSA,
which is perfectly fine.

Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: don't keep PTP configuration of all ports in single structure

[ Upstream commit 45d0fcb5bc9558d0bf3d2fa7fabc5d8a88d35439 ]

In a future change, the driver will need to determine whether PTP RX
timestamping is enabled on a port (including whether traps were set up
on that port in particular) and that is currently not possible.

The driver supports different RX filters (L2, L4) and kinds of TX
timestamping (one-step, two-step) on its ports, but it saves all
configuration in a single struct hwtstamp_config that is global to the
switch. So, the latest timestamping configuration on one port
(including a request to disable timestamping) affects what gets reported
for all ports, even though the configuration itself is still individual
to each port.

The port timestamping configurations are only coupled because of the
common structure, so replace the hwtstamp_config with a mask of trapped
protocols saved per port. We also have the ptp_cmd to distinguish
between one-step and two-step PTP timestamping, so with those 2 bits of
information we can fully reconstruct a descriptive struct
hwtstamp_config for each port, during the SIOCGHWTSTAMP ioctl.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: don't report that RX timestamping is enabled by default

[ Upstream commit 4fd44b82b7aceaa35c2901c6546d2c4198e0799d ]

PTP RX timestamping should be enabled when the user requests it, not by
default. If it is enabled by default, it can be problematic when the
ocelot driver is a DSA master, and it sidesteps what DSA tries to avoid
through __dsa_master_hwtstamp_validate().

Additionally, after the change which made ocelot trap PTP packets only
to the CPU at ocelot_hwtstamp_set() time, it is no longer even true that
RX timestamping is enabled by default, because until ocelot_hwtstamp_set()
is called, the PTP traps are actually not set up. So the rx_filter field
of ocelot->hwtstamp_config reflects an incorrect reality.

Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-geni-qcom: enable SPI_CONTROLLER_MUST_TX for GPI DMA mode

[ Upstream commit d10005837be83906bbd2078c3b4f9dfcbd6c95b6 ]

The GPI DMA mode requires for TX DMA to be prepared. Force SPI core to
provide TX buffer even if the caller didn't provide one by setting the
SPI_CONTROLLER_MUST_TX flag.

Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230629095847.3648597-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_ipt: add sanity checks on skb before calling target

[ Upstream commit b2dc32dcba08bf55cec600caa76f4afd2e3614df ]

Netfilter targets make assumptions on the skb state, for example
iphdr is supposed to be in the linear area.

This is normally done by IP stack, but in act_ipt case no
such checks are made.

Some targets can even assume that skb_dst will be valid.
Make a minimum effort to check for this:

- Don't call the targets eval function for non-ipv4 skbs.
- Don't call the targets eval function for POSTROUTING
emulation when the skb has no dst set.

v3: use skb_protocol helper (Davide Caratti)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: add a couple of helpers for iph tot_len

[ Upstream commit 058a8f7f73aae1cc22b53fcefec031b9e391b54d ]

This patch adds three APIs to replace the iph->tot_len setting
and getting in all places where IPv4 BIG TCP packets may reach,
they will be used in the following patches.

Note that iph_totlen() will be used when iph is not in linear
data of the skb.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b2dc32dcba08 ("net/sched: act_ipt: add sanity checks on skb before calling target")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_ipt: add sanity checks on table name and hook locations

[ Upstream commit b4ee93380b3c891fea996af8d1d3ca0e36ad31f0 ]

Looks like "tc" hard-codes "mangle" as the only supported table
name, but on kernel side there are no checks.

This is wrong. Not all xtables targets are safe to call from tc.
E.g. "nat" targets assume skb has a conntrack object assigned to it.
Normally those get called from netfilter nat core which consults the
nat table to obtain the address mapping.

"tc" userspace either sets PRE or POSTROUTING as hook number, but there
is no validation of this on kernel side, so update netlink policy to
reject bogus numbers. Some targets may assume skb_dst is set for
input/forward hooks, so prevent those from being used.

act_ipt uses the hook number in two places:
1. the state hook number, this is fine as-is
2. to set par.hook_mask

The latter is a bit mask, so update the assignment to make
xt_check_target() to the right thing.

Followup patch adds required checks for the skb/packet headers before
calling the targets evaluation function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix potential deadlock on &net->sctp.addr_wq_lock

[ Upstream commit 6feb37b3b06e9049e20dcf7e23998f92c9c5be9a ]

As &net->sctp.addr_wq_lock is also acquired by the timer
sctp_addr_wq_timeout_handler() in protocal.c, the same lock acquisition
at sctp_auto_asconf_init() seems should disable irq since it is called
from sctp_accept() under process context.

Possible deadlock scenario:
sctp_accept()
    -> sctp_sock_migrate()
    -> sctp_auto_asconf_init()
    -> spin_lock(&net->sctp.addr_wq_lock)
        <timer interrupt>
        -> sctp_addr_wq_timeout_handler()
        -> spin_lock_bh(&net->sctp.addr_wq_lock); (deadlock here)

This flaw was found using an experimental static analysis tool we are
developing for irq-related deadlock.

The tentative patch fix the potential deadlock by spin_lock_bh().

Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Fixes: 34e5b0118685 ("sctp: delay auto_asconf init until binding the first addr")
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230627120340.19432-1-dg573847474@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: i2c: ch7322: also select REGMAP

[ Upstream commit 29f96ac23648b2259f42d40703c47dd18fd172ca ]

Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.

../drivers/media/cec/i2c/ch7322.c:158:21: error: variable 'ch7322_regmap' has initializer but incomplete type
  158 | static const struct regmap_config ch7322_regmap = {
../drivers/media/cec/i2c/ch7322.c:159:10: error: 'const struct regmap_config' has no member named 'reg_bits'
  159 |         .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:159:21: warning: excess elements in struct initializer
  159 |         .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:10: error: 'const struct regmap_config' has no member named 'val_bits'
  160 |         .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:21: warning: excess elements in struct initializer
  160 |         .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:161:10: error: 'const struct regmap_config' has no member named 'max_register'
  161 |         .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:161:25: warning: excess elements in struct initializer
  161 |         .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:162:10: error: 'const struct regmap_config' has no member named 'disable_locking'
  162 |         .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c:162:28: warning: excess elements in struct initializer
  162 |         .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c: In function 'ch7322_probe':
../drivers/media/cec/i2c/ch7322.c:468:26: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
  468 |         ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c:468:24: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
  468 |         ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c: At top level:
../drivers/media/cec/i2c/ch7322.c:158:35: error: storage size of 'ch7322_regmap' isn't known
  158 | static const struct regmap_config ch7322_regmap = {

Link: https://lore.kernel.org/linux-media/20230608025435.29249-1-rdunlap@infradead.org
Fixes: 21b9a47e0ec7 ("media: cec: i2c: ch7322: Add ch7322 CEC controller driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Chase <jnchase@google.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Joe Tessler <jrt@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: check return value of freeze_super()

[ Upstream commit 8bec7dd1b3f7d7769d433d67bde404de948a2d95 ]

freeze_super() can fail, it needs to check its return value and do
error handling in f2fs_resize_fs().

Fixes: 04f0b2eaa3b3 ("f2fs: ioctl for removing a range from F2FS")
Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/guc/slpc: Apply min softlimit correctly

[ Upstream commit 3e49de73fb89272dea01ba420c7ccbcf6b96aed7 ]

The scenario being fixed here is depicted in the following sequence-

modprobe i915
echo 1 > /sys/class/drm/card0/gt/gt0/slpc_ignore_eff_freq
echo 300 > /sys/class/drm/card0/gt_min_freq_mhz (RPn)
cat /sys/class/drm/card0/gt_cur_freq_mhz --> cur == RPn as expected
echo 1 > /sys/kernel/debug/dri/0/gt0/reset --> reset
cat /sys/class/drm/card0/gt_min_freq_mhz --> cached freq is RPn
cat /sys/class/drm/card0/gt_cur_freq_mhz --> it's not RPn, but RPe!!

When SLPC reinitializes, it sets SLPC min freq to efficient frequency.
Even if we disable efficient freq post that, we should restore the cached
min freq (via H2G) for it to take effect.

v2: Clarify commit message (Ashutosh)

Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621014257.1769564-1-vinay.belgaumkar@intel.com
(cherry picked from commit da86b2b13f1d1ca26745b951ac94421f3137539a)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/psr: Use hw.adjusted mode when calculating io/fast wake times

[ Upstream commit 5311892a0ad1d301aafd53ca0154091b3eb407ea ]

Encoder compute config is changing hw.adjusted mode. Uapi.adjusted mode
doesn't get updated before psr compute config gets called. This causes io
and fast wake line calculation using adjusted mode containing values before
encoder adjustments. Fix this by using hw.adjusted mode instead of
uapi.adjusted mode.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8475
Fixes: cb42e8ede5b4 ("drm/i915/psr: Use calculated io and fast wake lines")
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620111745.2870706-1-jouni.hogander@intel.com
(cherry picked from commit ef0af9db2a21257885116949f471fe5565b2f0ab)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: st-lpc: Release some resources in st_rtc_probe() in case of error

[ Upstream commit 06c6e1b01d9261f03629cefd1f3553503291e6cf ]

If an error occurs after clk_get(), the corresponding resources should be
released.

Use devm_clk_get() to fix it.

Fixes: b5b2bdfc2893 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/866af6adbc7454a7b4505eb6c28fbdc86ccff39e.1686251455.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid10: fix the condition to call bio_end_io_acct()

[ Upstream commit 125bfc7cd750e68c99f1d446e2c22abea08c237f ]

/sys/block/[device]/queue/iostats is used to control whether to count io
stat. Write 0 to it will clear queue_flags QUEUE_FLAG_IO_STAT which means
iostats is disabled. If we disable iostats and later endable it, the io
issued during this period will be counted incorrectly, inflight will be
decreased to -1.

  //T1 set iostats
  echo 0 > /sys/block/md0/queue/iostats
   clear QUEUE_FLAG_IO_STAT

//T2 issue io
if (QUEUE_FLAG_IO_STAT) -> false
bio_start_io_acct
  inflight++

  echo 1 > /sys/block/md0/queue/iostats
   set QUEUE_FLAG_IO_STAT

//T3 io end
if (QUEUE_FLAG_IO_STAT) -> true
bio_end_io_acct
  inflight-- -> -1

Also, if iostats is enabled while issuing io but disabled while io end,
inflight will never be decreased.

Fix it by checking start_time when io end. If start_time is not 0, call
bio_end_io_acct().

Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230609094320.2397604-1-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: mtk_disp: Fix the disable flow of disp_pwm

[ Upstream commit bc13d60e4e1e945b34769a4a4c2b172e8552abe5 ]

There is a flow error in the original mtk_disp_pwm_apply() function.
If this function is called when the clock is disabled, there will be a
chance to operate the disp_pwm register, resulting in disp_pwm exception.
Fix this accordingly.

Fixes: 888a623db5d0 ("pwm: mtk-disp: Implement atomic API .apply()")
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Fei Shao <fshao@chromium.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: ab8500: Fix error code in probe()

[ Upstream commit cdcffafc4d845cc0c6392cba168c7a942734cce7 ]

This code accidentally return positive EINVAL instead of negative
-EINVAL.

Fixes: eb41f334589d ("pwm: ab8500: Fix register offset calculation to not depend on probe order")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: sysfs: Do not apply state to already disabled PWMs

[ Upstream commit 38ba83598633373f47951384cfc389181c8d1bed ]

If the PWM is exported but not enabled, do not call pwm_class_apply_state().
First of all, in this case, period may still be unconfigured and this would
make pwm_class_apply_state() return -EINVAL, and then suspend would fail.
Second, it makes little sense to apply state onto PWM that is not enabled
before suspend.

Failing case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo mem > /sys/power/state
...
pwm pwmchip4: PM: dpm_run_callback(): pwm_class_suspend+0x1/0xa8 returns -22
pwm pwmchip4: PM: failed to suspend: error -22
PM: Some devices failed to suspend, or early wake event detected
"

Working case:
"
$ echo 1 > /sys/class/pwm/pwmchip4/export
$ echo 100 > /sys/class/pwm/pwmchip4/pwm1/period
$ echo 10 > /sys/class/pwm/pwmchip4/pwm1/duty_cycle
$ echo mem > /sys/power/state
...
"

Do not call pwm_class_apply_state() in case the PWM is disabled
to fix this issue.

Fixes: 7fd4edc57bbae ("pwm: sysfs: Add suspend/resume support")
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: ef2bf4997f7d ("pwm: Improve args checking in pwm_apply_state()")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: imx-tpm: force 'real_period' to be zero in suspend

[ Upstream commit 661dfb7f46298e53f6c3deaa772fa527aae86193 ]

During suspend, all the tpm registers will lose values.
So the 'real_period' value of struct 'imx_tpm_pwm_chip'
should be forced to be zero to force the period update
code can be executed after system resume back.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 738a1cfec2ed ("pwm: Add i.MX TPM PWM driver support")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/bitmap: drop optimization of bitmap_{from,to}_arr64

[ Upstream commit c1d2ba10f594046831d14b03f194e8d05e78abad ]

bitmap_{from,to}_arr64() optimization is overly optimistic on 32-bit LE
architectures when it's wired to bitmap_copy_clear_tail().

bitmap_copy_clear_tail() takes care of unused bits in the bitmap up to
the next word boundary. But on 32-bit machines when copying bits from
bitmap to array of 64-bit words, it's expected that the unused part of
a recipient array must be cleared up to 64-bit boundary, so the last 4
bytes may stay untouched when nbits % 64 <= 32.

While the copying part of the optimization works correct, that clear-tail
trick makes corresponding tests reasonably fail:

test_bitmap: bitmap_to_arr64(nbits == 1): tail is not safely cleared: 0xa5a5a5a500000001 (must be 0x0000000000000001)

Fix it by removing bitmap_{from,to}_arr64() optimization for 32-bit LE
arches.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20230225184702.GA3587246@roeck-us.net/
Fixes: 0a97953fd221 ("lib: add bitmap_{from,to}_arr64")
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: tegra: xusb: check return value of devm_kzalloc()

[ Upstream commit 44faada0f38fc333d392af04c343b0e23f8f5d81 ]

devm_kzalloc() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: f67213cee2b3 ("phy: tegra: xusb: Add usb-role-switch support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230531073950.145339-1-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: stmpe: Only disable the regulators if they are enabled

[ Upstream commit 104d32bd81f620bb9f67fbf7d1159c414e89f05f ]

In stmpe_probe(), if some regulator_enable() calls fail, probing continues
and there is only a dev_warn().

So, if stmpe_probe() is called the regulator may not be enabled. It is
cleaner to test it before calling regulator_disable() in the remove
function.

Fixes: 9c9e321455fb ("mfd: stmpe: add optional regulators")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/8de3aaf297931d655b9ad6aed548f4de8b85425a.1686998575.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwtracing: hisi_ptt: Fix potential sleep in atomic context

[ Upstream commit 6c50384ef8b94a527445e3694ae6549e1f15d859 ]

We're using pci_irq_vector() to obtain the interrupt number and then
bind it to the CPU start perf under the protection of spinlock in
pmu::start(). pci_irq_vector() might sleep since [1] because it will
call msi_domain_get_virq() to get the MSI interrupt number and it
needs to acquire dev->msi.data->mutex. Getting a mutex will sleep on
contention. So use pci_irq_vector() in an atomic context is problematic.

This patch cached the interrupt number in the probe() and uses the
cached data instead to avoid potential sleep.

[1] commit 82ff8e6b78fc ("PCI/MSI: Use msi_get_virq() in pci_get_vector()")

Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230621092804.15120-6-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags

[ Upstream commit 4e13c7a55cf752887f2b8d8008711dbbc64ea796 ]

Using PWRSTS_RET on msm8974's MDSS_GDSC causes display to stop working.
The gdsc doesn't fully come out of retention mode. Change it's pwrsts
flags to PWRSTS_OFF_ON.

Fixes: d399723950c4 ("clk: qcom: gdsc: Fix the handling of PWRSTS_RET support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230507175335.2321503-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: fastrpc: check return value of devm_kasprintf()

[ Upstream commit af2e19d82a116bc622eea84c9faadd5f7e20bec4 ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230615102546.581899-1-claudiu.beznea@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: mediatek: correct voltages for MT7622 and MT7623

[ Upstream commit f85534113f5ae90a52521cdb9e9977a43ee42626 ]

The MT6380 regulator typically used together with MT7622 does not
support the current maximum processor and SRAM voltage in the cpufreq
driver (1360000uV).
For MT7622 limit processor and SRAM supply voltages to 1350000uV to
avoid having the tracking algorithm request unsupported voltages from
the regulator.

On MT7623 there is no separate SRAM supply and the maximum voltage used
is 1300000uV. Create dedicated platform data for MT7623 to cover that
case as well.

Fixes: 0883426fd07e3 ("cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623")
Suggested-by: Jia-wei Chang <Jia-wei.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler

[ Upstream commit 0bc380beb78aa352eadbc21d934dd9606fcee808 ]

We do check for target CPU == -1, but this might change at the time we
are going to use it. Hold the physical target CPU in a local variable to
avoid out-of-bound accesses to the cpu arrays.

Cc: Pierre Morel <pmorel@linux.ibm.com>
Fixes: 87e28a15c42c ("KVM: s390: diag9c (directed yield) forwarding")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: vsie: fix the length of APCB bitmap

[ Upstream commit 246be7d2720ea9a795b576067ecc5e5c7a1e7848 ]

bit_and() uses the count of bits as the woking length.
Fix the previous implementation and effectively use
the right bitmap size.

Fixes: 19fd83a64718 ("KVM: s390: vsie: allow CRYCB FORMAT-1")
Fixes: 56019f9aca22 ("KVM: s390: vsie: Allow CRYCB FORMAT-2")

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20230511094719.9691-1-pmorel@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: stmfx: Nullify stmfx->vdd in case of error

[ Upstream commit 7c81582c0bccb4757186176f0ee12834597066ad ]

Nullify stmfx->vdd in case devm_regulator_get_optional() returns an error.
And simplify code by returning an error only if return code is not -ENODEV,
which means there is no vdd regulator and it is not an issue.

Fixes: d75846ed08e6 ("mfd: stmfx: Fix dev_err_probe() call in stmfx_chip_init()")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230609092804.793100-2-amelie.delaunay@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: stmfx: Fix error path in stmfx_chip_init

[ Upstream commit f592cf624531286f8b52e40dcfc157a5a7fb115c ]

In error path, disable vdd regulator if it exists, but don't overload ret.
Because if regulator_disable() is successful, stmfx_chip_init will exit
successfully while chip init failed.

Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230609092804.793100-1-amelie.delaunay@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: fsl-mc: don't assume child devices are all fsl-mc devices

[ Upstream commit 303c9c63abb9390e906052863f82bb4e9824e5c0 ]

Changes in VFIO caused a pseudo-device to be created as child of
fsl-mc devices causing a crash [1] when trying to bind a fsl-mc
device to VFIO. Fix this by checking the device type when enumerating
fsl-mc child devices.

[1]
Modules linked in:
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
CPU: 6 PID: 1289 Comm: sh Not tainted 6.2.0-rc5-00047-g7c46948a6e9c #2
Hardware name: NXP Layerscape LX2160ARDB (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mc_send_command+0x24/0x1f0
lr : dprc_get_obj_region+0xfc/0x1c0
sp : ffff80000a88b900
x29: ffff80000a88b900 x28: ffff48a9429e1400 x27: 00000000000002b2
x26: ffff48a9429e1718 x25: 0000000000000000 x24: 0000000000000000
x23: ffffd59331ba3918 x22: ffffd59331ba3000 x21: 0000000000000000
x20: ffff80000a88b9b8 x19: 0000000000000000 x18: 0000000000000001
x17: 7270642f636d2d6c x16: 73662e3030303030 x15: ffffffffffffffff
x14: ffffd59330f1d668 x13: ffff48a8727dc389 x12: ffff48a8727dc386
x11: 0000000000000002 x10: 00008ceaf02f35d4 x9 : 0000000000000012
x8 : 0000000000000000 x7 : 0000000000000006 x6 : ffff80000a88bab0
x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000a88b9e8
x2 : ffff80000a88b9e8 x1 : 0000000000000000 x0 : ffff48a945142b80
Call trace:
mc_send_command+0x24/0x1f0
dprc_get_obj_region+0xfc/0x1c0
fsl_mc_device_add+0x340/0x590
fsl_mc_obj_device_add+0xd0/0xf8
dprc_scan_objects+0x1c4/0x340
dprc_scan_container+0x38/0x60
vfio_fsl_mc_probe+0x9c/0xf8
fsl_mc_driver_probe+0x24/0x70
really_probe+0xbc/0x2a8
__driver_probe_device+0x78/0xe0
device_driver_attach+0x30/0x68
bind_store+0xa8/0x130
drv_attr_store+0x24/0x38
sysfs_kf_write+0x44/0x60
kernfs_fop_write_iter+0x128/0x1b8
vfs_write+0x334/0x448
ksys_write+0x68/0xf0
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x108
el0_svc_common.constprop.1+0x94/0xf8
do_el0_svc+0x38/0xb0
el0_svc+0x20/0x50
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x174/0x178
Code: aa0103f4 a9025bf5 d5384100 b9400801 (79401260)
---[ end trace 0000000000000000 ]---

Fixes: 3c28a76124b2 ("vfio: Add struct device to vfio_device")
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Message-ID: <20230613160718.29500-1-laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmem: rmem: Use NVMEM_DEVID_AUTO

[ Upstream commit 09dd7b993eddb3b48634fd5ddf27aa799785a9ee ]

It is reasonable to declare multiple nvmem blocks. Unless a unique 'id'
is passed in for each block there may be name clashes.

Avoid this by using the magic token NVMEM_DEVID_AUTO.

Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-6-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmem: sunplus-ocotp: release otp->clk before return

[ Upstream commit 095bb8ba45f28ed15296eb5b7662e03e57d5e34e ]

Smatch reports:
drivers/nvmem/sunplus-ocotp.c:205 sp_ocotp_probe()
warn: 'otp->clk' from clk_prepare() not released on lines: 196.

In the function sp_ocotp_probe(struct platform_device *pdev), otp->clk may
not be released before return.

To fix this issue, using function clk_unprepare() to release otp->clk.

Fixes: 8747ec2e9762 ("nvmem: Add driver for OCOTP in Sunplus SP7021")
Signed-off-by: Yi Yingao <m202271736@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Message-ID: <20230509085237.5917-1-m202271736@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: fwnode: fix fwnode_irq_get[_byname]()

[ Upstream commit 39d422555e43379516d4d13f5b7162a3dee6e646 ]

The fwnode_irq_get() and the fwnode_irq_get_byname() return 0 upon
device-tree IRQ mapping failure. This is contradicting the
fwnode_irq_get_byname() function documentation and can potentially be a
source of errors like:

int probe(...) {
...

irq = fwnode_irq_get_byname();
if (irq <= 0)
return irq;

...
}

Here we do correctly check the return value from fwnode_irq_get_byname()
but the driver probe will now return success. (There was already one
such user in-tree).

Change the fwnode_irq_get_byname() to work as documented and make also the
fwnode_irq_get() follow same common convention returning a negative errno
upon failure.

Fixes: ca0acb511c21 ("device property: Add fwnode_irq_get_byname")
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <3e64fe592dc99e27ef9a0b247fc49fa26b6b8a58.1685340157.git.mazziesaccount@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

device property: Clarify description of returned value in some functions

[ Upstream commit 295209ca7b5b3aa6375d6190311b2ae804dbcf65 ]

Some of the functions do not provide Return: section on absence of which
kernel-doc complains. Besides that several functions return the fwnode
handle with incremented reference count. Add a respective note to make sure
that the caller decrements it when it's not needed anymore.

While at it, unify the style of the Return: sections.

Reported-by: Daniel Kaehn <kaehndan@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230217133344.79278-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 39d422555e43 ("drivers: fwnode: fix fwnode_irq_get[_byname]()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

device property: Fix documentation for fwnode_get_next_parent()

[ Upstream commit f18caf261398a7f2de4fa3f600deb87072fe7b8d ]

Use fwnode_handle_put() on the node pointer to release the refcount.
Change fwnode_handle_node() to fwnode_handle_put().

Fixes: 233872585de1 ("device property: Add fwnode_get_next_parent()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20221207112219.2652411-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 39d422555e43 ("drivers: fwnode: fix fwnode_irq_get[_byname]()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_omap: Use force_suspend and resume for system suspend

[ Upstream commit 20a41a62618df85f3a2981008edec5cadd785e0a ]

We should not rely on autosuspend timeout for system suspend. Instead,
let's use force_suspend and force_resume functions. Otherwise the serial
port controller device may not be idled on suspend.

As we are doing a register write on suspend to configure the serial port,
we still need to runtime PM resume the port on suspend.

While at it, let's switch to pm_runtime_resume_and_get() and check for
errors returned. And let's add the missing line break before return to the
suspend function while at it.

Fixes: 09d8b2bdbc5c ("serial: 8250: omap: Provide ability to enable/disable UART as wakeup source")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <20230614045922.4798-1-tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"

[ Upstream commit df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c ]

This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15.

Heikki reports that this should not be a global flag just to work around
one broken driver and should be fixed differently, so revert it.

Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection")
Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com
Cc: Prashanth K <quic_prashk@quicinc.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel-lpss: Add missing check for platform_get_resource

[ Upstream commit d918e0d5824495a75d00b879118b098fcab36fdb ]

Add the missing check for platform_get_resource and return error
if it fails.

Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230609014818.28475-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: wcd934x: Fix an error handling path in wcd934x_slim_probe()

[ Upstream commit f190b4891a3f9fac123a7afd378d4143a2723313 ]

If devm_gpiod_get_optional() fails, some resources need to be released, as
already done in the .remove() function.

While at it, remove the unneeded error code from a dev_err_probe() call.
It is already added in a human readable way by dev_err_probe() itself.

Fixes: 6a0ee2a61a31 ("mfd: wcd934x: Replace legacy gpio interface for gpiod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/02d8447f6d1df52cc8357aae698152e9a9be67c6.1684565021.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()

[ Upstream commit 01052b91c9808e3c3b068ae2721cb728ec9aa4c0 ]

If dwc3_meson_g12a_otg_init() fails, resources allocated by the previous
of_platform_populate() call should be released, as already done in the
error handling path.

Fixes: 1e355f21d3fb ("usb: dwc3: Add Amlogic A1 DWC3 glue")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <9d28466de1808ccc756b4cc25fc72c482d133d13.1686403934.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: common: usb-conn-gpio: Set last role to unknown before initial detection

[ Upstream commit edd60d24bd858cef165274e4cd6cab43bdc58d15 ]

Currently if we bootup a device without cable connected, then
usb-conn-gpio won't call set_role() since last_role is same as
current role. This happens because during probe last_role gets
initialised to zero.

To avoid this, added a new constant in enum usb_role, last_role
is set to USB_ROLE_UNKNOWN before performing initial detection.

While at it, also handle default case for the usb_role switch
in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid
build warnings.

Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()

[ Upstream commit 4a944da707123686d372ec01ea60056902fadf35 ]

If dwc3_qcom_create_urs_usb_platdev() fails, some resources still need to
be released, as already done in the other error handling path of the
probe.

Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Message-ID: <b69fa8dd68d816e7d24c88d3eda776ceb28c5dc5.1685890571.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()

[ Upstream commit 8fd95da2cfb5046c4bb5a3cdc9eb7963ba8b10dd ]

In the probe, some resources are allocated with
dwc3_qcom_of_register_core() or dwc3_qcom_acpi_register_core(). The
corresponding resources are already coorectly freed in the error handling
path of the probe, but not in the remove function.

Fix it.

Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Message-ID: <c0215a84cdf18fb3514c81842783ec53cf149deb.1685891059.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: fix KVM_S390_GET_CMMA_BITS for GFNs in memslot holes

[ Upstream commit 285cff4c0454340a4dc53f46e67f2cb1c293bd74 ]

The KVM_S390_GET_CMMA_BITS ioctl may return incorrect values when userspace
specifies a start_gfn outside of memslots.

This can occur when a VM has multiple memslots with a hole in between:

+-----+----------+--------+--------+
| ... | Slot N-1 | <hole> | Slot N |
+-----+----------+--------+--------+
      ^          ^        ^        ^
      |          |        |        |
GFN   A          A+B      |        |
                          A+B+C    |
           A+B+C+D

When userspace specifies a GFN in [A+B, A+B+C), it would expect to get the
CMMA values of the first dirty page in Slot N. However, userspace may get a
start_gfn of A+B+C+D with a count of 0, hence completely skipping over any
dirty pages in slot N.

The error is in kvm_s390_next_dirty_cmma(), which assumes
gfn_to_memslot_approx() will return the memslot _below_ the specified GFN
when the specified GFN lies outside a memslot. In reality it may return
either the memslot below or above the specified GFN.

When a memslot above the specified GFN is returned this happens:

- ofs is calculated, but since the memslot's base_gfn is larger than the
  specified cur_gfn, ofs will underflow to a huge number.
- ofs is passed to find_next_bit(). Since ofs will exceed the memslot's
  number of pages, the number of pages in the memslot is returned,
  completely skipping over all bits in the memslot userspace would be
  interested in.

Fix this by resetting ofs to zero when a memslot _above_ cur_gfn is
returned (cur_gfn < ms->base_gfn).

Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: afdad61615cc ("KVM: s390: Fix storage attributes migration with memory slots")
Message-Id: <20230324145424.293889-2-nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid NULL pointer dereference f2fs_write_end_io()

[ Upstream commit d8189834d4348ae608083e1f1f53792cfcc2a9bc ]

butt3rflyh4ck reports a bug as below:

When a thread always calls F2FS_IOC_RESIZE_FS to resize fs, if resize fs is
failed, f2fs kernel thread would invoke callback function to update f2fs io
info, it would call  f2fs_write_end_io and may trigger null-ptr-deref in
NODE_MAPPING.

general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
RIP: 0010:NODE_MAPPING fs/f2fs/f2fs.h:1972 [inline]
RIP: 0010:f2fs_write_end_io+0x727/0x1050 fs/f2fs/data.c:370
<TASK>
bio_endio+0x5af/0x6c0 block/bio.c:1608
req_bio_endio block/blk-mq.c:761 [inline]
blk_update_request+0x5cc/0x1690 block/blk-mq.c:906
blk_mq_end_request+0x59/0x4c0 block/blk-mq.c:1023
lo_complete_rq+0x1c6/0x280 drivers/block/loop.c:370
blk_complete_reqs+0xad/0xe0 block/blk-mq.c:1101
__do_softirq+0x1d4/0x8ef kernel/softirq.c:571
run_ksoftirqd kernel/softirq.c:939 [inline]
run_ksoftirqd+0x31/0x60 kernel/softirq.c:931
smpboot_thread_fn+0x659/0x9e0 kernel/smpboot.c:164
kthread+0x33e/0x440 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

The root cause is below race case can cause leaving dirty metadata
in f2fs after filesystem is remount as ro:

Thread A Thread B
- f2fs_ioc_resize_fs
- f2fs_readonly   --- return false
- f2fs_resize_fs
- f2fs_remount
- write_checkpoint
- set f2fs as ro
  - free_segment_range
   - update meta_inode's data

Then, if f2fs_put_super()  fails to write_checkpoint due to readonly
status, and meta_inode's dirty data will be writebacked after node_inode
is put, finally, f2fs_write_end_io will access NULL pointer on
sbi->node_inode.

Thread A IRQ context
- f2fs_put_super
- write_checkpoint fails
- iput(node_inode)
- node_inode = NULL
- iput(meta_inode)
  - write_inode_now
   - f2fs_write_meta_page
- f2fs_write_end_io
- NODE_MAPPING(sbi)
: access NULL pointer on node_inode

Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Closes: https://lore.kernel.org/r/1684480657-2375-1-git-send-email-yangtiezhu@loongson.cn
Tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix potential deadlock due to unpaired node_write lock use

[ Upstream commit f082c6b205a06953f26c40bdc7621cc5a58ceb7c ]

If S_NOQUOTA is cleared from inode during data page writeback of quota
file, it may miss to unlock node_write lock, result in potential
deadlock, fix to use the lock in paired.

Kworker Thread
- writepage
if (IS_NOQUOTA())
f2fs_down_read(&sbi->node_write);
- vfs_cleanup_quota_inode
- inode->i_flags &= ~S_NOQUOTA;
if (IS_NOQUOTA())
f2fs_up_read(&sbi->node_write);

Fixes: 79963d967b49 ("f2fs: shrink node_write lock coverage")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Fix duplicate should_fault_in_pages() call

[ Upstream commit c8ed1b35931245087968fd95b2ec3dfc50f77769 ]

In gfs2_file_buffered_write(), we currently jump from the second call of
function should_fault_in_pages() to above the first call, so
should_fault_in_pages() is getting called twice in a row, causing it to
accidentally fall back to single-page writes rather than trying the more
efficient multi-page writes first.

Fix that by moving the retry label to the correct place, behind the
first call to should_fault_in_pages().

Fixes: e1fa9ea85ce8 ("gfs2: Stop using glock holder auto-demotion for now")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: Avoid using IRQ0 on SH3 and SH4

[ Upstream commit a8ac2961148e8c720dc760f2e06627cd5c55a154 ]

IRQ0 is no longer returned by platform_get_irq() and its ilk -- they now
return -EINVAL instead. However, the kernel code supporting SH3/4-based
SoCs still maps the IRQ #s starting at 0 -- modify that code to start the
IRQ #s from 16 instead.

The patch should mostly affect the AP-SH4A-3A/AP-SH4AD-0A boards as they
indeed are using IRQ0 for the SMSC911x compatible Ethernet chip.

Fixes: ce753ad1549c ("platform: finally disallow IRQ0 in platform_get_irq() and its ilk")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/71105dbf-cdb0-72e1-f9eb-eeda8e321696@omp.ru
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atomisp: gmin_platform: fix out_len in gmin_get_config_dsm_var()

[ Upstream commit 1657f2934daf89e8d9fa4b2697008909eb22c73e ]

Ideally, strlen(cur->string.pointer) and strlen(out) would be the same.
But this code is using strscpy() to avoid a potential buffer overflow.
So in the same way we should take the strlen() of the smaller string to
avoid a buffer overflow in the caller, gmin_get_var_int().

Link: https://lore.kernel.org/r/26124bcd-8132-4483-9d67-225c87d424e8@kili.mountain
Fixes: 387041cda44e ("media: atomisp: improve sensor detection code to use _DSM table")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: helpers: Fix ALIGN() of non power of two

[ Upstream commit 927e78ac8bc58155316cf6f46026e1912bbbbcfc ]

ALIGN() expects its second argument to be a power of 2, otherwise
incorrect results are produced for some inputs. The output can be
both larger or smaller than what is expected.

For example, ALIGN(304, 192) equals 320 instead of 384, and
ALIGN(65, 192) equals 256 instead of 192.

However, nestling two ALIGN() as is done in this case seem to only
produce results equal to or bigger than the expected result if ALIGN()
had handled non powers of two, and that in turn results in framesizes
that are either the correct size or too large.

Fortunately, since 192 * 4 / 3 equals 256, it turns out that one ALIGN()
is sufficient.

Fixes: ab1eda449c6e ("media: venus: vdec: handle 10bit bitstreams")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: rt5033: Drop rt5033-battery sub-device

[ Upstream commit 43db1344e0f8c1eb687a1d6cd5b0de3009ab66cb ]

The fuel gauge in the RT5033 PMIC (rt5033-battery) has its own I2C bus
and interrupt lines. Therefore, it is not part of the MFD device
and needs to be specified separately in the device tree.

Fixes: 0b271258544b ("mfd: rt5033: Add Richtek RT5033 driver core.")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/6a8a19bc67b5be3732882e8131ad2ffcb546ac03.1684182964.git.jahau@rocketmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: Fix loss of connection info when a module is unloaded

[ Upstream commit c45b2835e7b205783bdfe08cc98fa86a7c5eeb74 ]

child_fwnode should be a read only property based on the DT or ACPI. If
it's cleared on the parent device when a child is unloaded, then when
the child is loaded again the connection won't be remade.

child_dev should be cleared instead which signifies that the connection
should be remade when the child_fwnode registers a new coresight_device.

Similarly the reference count shouldn't be decremented as long as the
parent device exists. The correct place to drop the reference is in
coresight_release_platform_data() which is already done.

Reproducible on Juno with the following steps:

  # load all coresight modules.
  $ cd /sys/bus/coresight/devices/
  $ echo 1 > tmc_etr0/enable_sink
  $ echo 1 > etm0/enable_source
  # Works fine ^

  $ echo 0 > etm0/enable_source
  $ rmmod coresight-funnel
  $ modprobe coresight-funnel
  $ echo 1 > etm0/enable_source
  -bash: echo: write error: Invalid argument

Fixes: 37ea1ffddffa ("coresight: Use fwnode handle instead of device names")
Fixes: 2af89ebacf29 ("coresight: Clear the connection field properly")
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

i3c: master: svc: fix cpu schedule in spin lock

[ Upstream commit 33beadb3b1ab74e69db2c49d9663f3a93a273943 ]

pm_runtime_resume_and_get() may call sleep(). It cannot be used in
svc_i3c_master_start_xfer_locked(), because it is in a spin lock.

Move the pm runtime operations to svc_i3c_master_enqueue_xfer().

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Fixes: 05be23ef78f7 ("i3c: master: svc: add runtime pm support")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230517033030.3068085-2-xiaoning.wang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm: replace ll_rw_block with submit_bh

[ Upstream commit b290df06811852d4cc36f4b8a2a30c2063197a74 ]

Function ll_rw_block was removed in commit 79f597842069 ("fs/buffer:
remove ll_rw_block() helper"). There is no unified function to sumbit
read or write buffer in block layer for now. Consider similar sematics,
we can choose submit_bh() to replace ll_rw_block() as predefined crash
point. In submit_bh(), it also takes read or write flag as the first
argument and invoke submit_bio() to submit I/O request to block layer.

Fixes: 79f597842069 ("fs/buffer: remove ll_rw_block() helper")
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230503162944.3969-1-findns94@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR

[ Upstream commit 30480b988f88c279752f3202a26b6fee5f586aef ]

The root->ino_idr is supposed to be protected by kernfs_idr_lock, fix
it.

Fixes: 488dee96bb62 ("kernfs: allow creating kernfs objects with arbitrary uid/gid")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230523024017.24851-1-songmuchun@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: lock port for UART_IER access in omap8250_irq()

[ Upstream commit 25614735a647693c1260f253dc3ab32127697806 ]

omap8250_irq() accesses UART_IER. This register is modified twice
by each console write (serial8250_console_write()) under the port
lock. omap8250_irq() must also take the port lock to guanentee
synchronized access to UART_IER.

Since the port lock is already being taken for the stop_rx() callback
and since it is safe to call cancel_delayed_work() while holding the
port lock, simply extend the port lock region to include UART_IER
access.

Fixes: 1fe0e1fa3209 ("serial: 8250_omap: Handle optional overrun-throttle-ms property")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230525093159.223817-8-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: core: lock port for start_rx() in uart_resume_port()

[ Upstream commit 51e45fba14bf08b66bca764a083c7f2e2ff62f01 ]

The only user of the start_rx() callback (qcom_geni) directly calls
its own stop_rx() callback. Since stop_rx() requires that the
port->lock is taken and interrupts are disabled, the start_rx()
callback has the same requirement.

Fixes: cfab87c2c271 ("serial: core: Introduce callback for start_rx and do stop_rx in suspend only if this callback implementation is present.")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230525093159.223817-5-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: lock port for stop_rx() in omap8250_irq()

[ Upstream commit ca73a892c5bec4b08a2fa22b3015e98ed905abb7 ]

The uarts_ops stop_rx() callback expects that the port->lock is
taken and interrupts are disabled.

Fixes: 1fe0e1fa3209 ("serial: 8250_omap: Handle optional overrun-throttle-ms property")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230525093159.223817-4-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: core: lock port for stop_rx() in uart_suspend_port()

[ Upstream commit abcb0cf1f5b2d99b1d117a4dbce334120e358d6d ]

The uarts_ops stop_rx() callback expects that the port->lock is
taken and interrupts are disabled.

Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230525093159.223817-3-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: misc: eud: Fix eud sysfs path (use 'qcom_eud')

[ Upstream commit f16135918b5f8b510db014ecf0a069e34c02382e ]

The eud sysfs enablement path is currently mentioned in the
Documentation as:
/sys/bus/platform/drivers/eud/.../enable

Instead it should be:
/sys/bus/platform/drivers/qcom_eud/.../enable

Fix the same.

Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230517211756.2483552-2-bhupesh.sharma@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: hide unused usbfs_notify_suspend/resume functions

[ Upstream commit 8e6bd945e6dde64fbc60ec3fe252164493a8d3a2 ]

The declaration is in an #ifdef, which causes warnings when building
with 'make W=1' and without CONFIG_PM:

drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend'
drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume'

Use the same #ifdef check around the function definitions to avoid
the warnings and slightly shrink the USB core.

Fixes: 7794f486ed0b ("usbfs: Add ioctls for runtime power management")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: phy-tahvo: fix memory leak in tahvo_usb_probe()

[ Upstream commit 342161c11403ea00e9febc16baab1d883d589d04 ]

Smatch reports:
drivers/usb/phy/phy-tahvo.c: tahvo_usb_probe()
warn: missing unwind goto?

After geting irq, if ret < 0, it will return without error handling to
free memory.
Just add error handling to fix this problem.

Fixes: 0d45a1373e66 ("usb: phy: tahvo: add IRQ check")
Signed-off-by: Li Yang <lidaxian@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230420140832.9110-1-lidaxian@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: Fix kernel doc of property capability fields to avoid warnings

[ Upstream commit 73346b9965ebda2feb7fef8629e9b28baee820e3 ]

Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:

     Function parameter or member 'usb_bits' not described in 'extcon_cable'
     Function parameter or member 'chg_bits' not described in 'extcon_cable'
     Function parameter or member 'jack_bits' not described in 'extcon_cable'
     Function parameter or member 'disp_bits' not described in 'extcon_cable'

Describe the fields added in the past.

Fixes: ceaa98f442cf ("extcon: Add the support for the capability of each property")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: Fix kernel doc of property fields to avoid warnings

[ Upstream commit 7e77e0b7a9f4cdf91cb0950749b40c840ea63efc ]

Kernel documentation has to be synchronized with a code, otherwise
the validator is not happy:

     Function parameter or member 'usb_propval' not described in 'extcon_cable'
     Function parameter or member 'chg_propval' not described in 'extcon_cable'
     Function parameter or member 'jack_propval' not described in 'extcon_cable'
     Function parameter or member 'disp_propval' not described in 'extcon_cable'

Describe the fields added in the past.

Fixes: 067c1652e7a7 ("extcon: Add the support for extcon property according to extcon type")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: u_serial: Add null pointer check in gserial_suspend

[ Upstream commit 2f6ecb89fe8feb2b60a53325b0eeb9866d88909a ]

Consider a case where gserial_disconnect has already cleared
gser->ioport. And if gserial_suspend gets called afterwards,
it will lead to accessing of gser->ioport and thus causing
null pointer dereference.

Avoid this by adding a null pointer check. Added a static
spinlock to prevent gser->ioport from becoming null after
the newly added null pointer check.

Fixes: aba3a8d01d62 ("usb: gadget: u_serial: add suspend resume callbacks")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1683278317-11774-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: qcom: Fix potential memory leak

[ Upstream commit 097fb3ee710d4de83b8d4f5589e8ee13e0f0541e ]

Function dwc3_qcom_probe() allocates memory for resource structure
which is pointed by parent_res pointer. This memory is not
freed. This leads to memory leak. Use stack memory to prevent
memory leak.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20230517172518.442591-1-VEfanov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vchiq_arm: mark vchiq_platform_init() static

[ Upstream commit e152c58d7a48194d6b530d8e004d650fd01568b6 ]

This function has no callers from other files, and the declaration
was removed a while ago, causing a W=1 warning:

drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:465:5: error: no previous prototype for 'vchiq_platform_init'

Marking it static solves this problem but introduces a new warning
since gcc determines that 'g_fragments_base' is never initialized
in some kernel configurations:

In file included from include/linux/string.h:254,
                 from include/linux/bitmap.h:11,
                 from include/linux/cpumask.h:12,
                 from include/linux/mm_types_task.h:14,
                 from include/linux/mm_types.h:5,
                 from include/linux/buildid.h:5,
                 from include/linux/module.h:14,
                 from drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:8:
In function 'memcpy_to_page',
    inlined from 'free_pagelist' at drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:433:4:
include/linux/fortify-string.h:57:33: error: argument 2 null where non-null expected [-Werror=nonnull]
include/linux/highmem.h:427:9: note: in expansion of macro 'memcpy'
  427 |         memcpy(to + offset, from, len);
      |         ^~~~~~

Add a NULL pointer check for this in addition to the static annotation
to avoid both.

Fixes: 89cc4218f640 ("staging: vchiq_arm: drop unnecessary declarations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20230516202603.560554-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock

[ Upstream commit 8fd492e77ff71f68f7311c22f7bc960182465cd7 ]

The mdp_clk_src clock should not be turned off. Instead it should be
'parked' to the XO, as most of other mdp_clk_src clocks. Fix that by
using the clk_rcg2_shared_ops.

Fixes: d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507175335.2321503-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: dispcc-qcm2290: Fix GPLL0_OUT_DIV handling

[ Upstream commit 63d56adf04b5795e54440dc5b7afddecb2966863 ]

GPLL0_OUT_DIV (.fw_name = "gcc_disp_gpll0_div_clk_src") was previously
made to reuse the same parent enum entry as GPLL0_OUT_MAIN
(.fw_name = "gcc_disp_gpll0_clk_src") in parent_map_2.

Resolve it by introducing its own entry in the parent enum and
correctly assigning it in disp_cc_parent_map_2[].

Fixes: cc517ea3333f ("clk: qcom: Add display clock controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-topic-qcm_dispcc-v2-2-bce7dd512fe4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: dispcc-qcm2290: Fix BI_TCXO_AO handling

[ Upstream commit 92dfee0fc889b5b00ffb6b1de87ce64c483bcb7b ]

BI_TCXO_AO (.fw_name = "bi_tcxo_ao") was previously made to reuse the
same parent enum entry as BI_TCXO (.fw_name = "bi_tcxo") in parent_map_2.

Resolve it by introducing its own entry in the parent enum and
correctly assigning it in disp_cc_parent_map_2[].

Fixes: cc517ea3333f ("clk: qcom: Add display clock controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-topic-qcm_dispcc-v2-1-bce7dd512fe4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: ipq6018: fix networking resets

[ Upstream commit 349b5bed539b491b7894a5186a895751fd8ba6c7 ]

Networking resets in IPQ6018 all use bitmask as they require multiple
bits to be set and cleared instead of a single bit.

So, current networking resets have the same register and bit 0 set which
is clearly incorrect.

Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526190855.2941291-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: reset: support resetting multiple bits

[ Upstream commit 4a5210893625f89723ea210d7c630b730abb37ad ]

This patch adds the support for giving the complete bitmask
in reset structure and reset operation will use this bitmask
for all reset operations.

Currently, reset structure only takes a single bit for each reset
and then calculates the bitmask by using the BIT() macro.

However, this is not sufficient anymore for newer SoC-s like IPQ8074,
IPQ6018 and more, since their networking resets require multiple bits
to be asserted in order to properly reset the HW block completely.

So, in order to allow asserting multiple bits add "bitmask" field to
qcom_reset_map, and then use that bitmask value if its populated in the
driver, if its not populated, then we just default to existing behaviour
and calculate the bitmask on the fly.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
Stable-dep-of: 349b5bed539b ("clk: qcom: ipq6018: fix networking resets")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: using decoder status instead of core work count

[ Upstream commit 2864e304faec04c2674328aad0e820a9cd84cdec ]

Adding the definition of decoder status to separate different decoder
period for core hardware.

core_work_cnt is the number of core work queued to work queue, the control
is very complex, leading to some unreasonable test result.

Using parameter status to indicate whether queue core work to work queue.

Fixes: 2e0ef56d81cb ("media: mediatek: vcodec: making sure queue_work successfully")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hi846: fix usage of pm_runtime_get_if_in_use()

[ Upstream commit 04fc06f6dc1592ed5d675311ac50d8fba5db62ab ]

pm_runtime_get_if_in_use() does not only return nonzero values when
the device is in use, it can return a negative errno too.

And especially during resuming from system suspend, when runtime pm
is not yet up again, -EAGAIN is being returned, so the subsequent
pm_runtime_put() call results in a refcount underflow.

Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use().

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: Correct format propagation for st-mipid02

[ Upstream commit 306c3190b30d4d6a098888b9d7d4cefaa0ddcb91 ]

Format propagation in the st-mipid02 driver is incorrect in that when
setting format for V4L2_SUBDEV_FORMAT_TRY on the source pad, the
_active_ rather than _try_ format from the sink pad is propagated.
This causes problems with format negotiation - update the function to
propagate the correct format.

Fixes: 642bb5e88fed ("media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>