review.tizen.org Git - platform/kernel/linux-rpi.git/log

drm/vkms: add rotate-270 property

Currently, vkms supports the rotate-90, rotate-180, reflect-x and
reflect-y properties. Therefore, improve the vkms IGT test coverage by
adding the rotate-270 property to vkms. The rotation was implement by
software: rotate the way the blending occurs by making the source x axis
be the destination y axis and the source y axis be the destination x
axis and reverse-read the axis.

Now, vkms supports all possible rotation values.

Tested with igt@kms_rotation_crc@primary-rotation-270 [1],
and igt@kms_rotation_crc@sprite-rotation-270 [1].

[1] https://patchwork.freedesktop.org/series/116025/

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-6-mcanal@igalia.com

drm/vkms: add rotate-90 property

Currently, vkms only supports the rotate-180, reflect-x and reflect-y
properties. Therefore, improve the vkms IGT test coverage by adding the
rotate-90 property to vkms. The rotation was implement by software: rotate
the way the blending occurs by making the source x axis be the destination
y axis and the source y axis be the destination x axis.

Tested with igt@kms_rotation_crc@primary-rotation-90 [1],
igt@kms_rotation_crc@sprite-rotation-90 [1], and
igt@kms_rotation_crc@sprite-rotation-90-pos-100-0 [1].

[1] https://patchwork.freedesktop.org/series/116025/

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-5-mcanal@igalia.com

drm/vkms: add reflect-y and rotate-180 property

Currently, vkms only supports the reflect-x property. Therefore, add the
reflect-y property to vkms through a software implementation of the
operation. This is possible by reverse reading the y axis during the
blending.

Note that, by implementing the reflect-x and reflect-y properties, it is
also possible to add the rotate-180 property, as it is a combination
of those two properties.

Tested with igt@kms_rotation_crc@primary-reflect-y [1],
igt@kms_rotation_crc@sprite-reflect-y [1],
igt@kms_rotation_crc@primary-rotation-180,
igt@kms_rotation_crc@sprite-rotation-180,
and igt@kms_rotation_crc@cursor-rotation-180.

[1] https://patchwork.freedesktop.org/series/116025/

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-4-mcanal@igalia.com

drm/vkms: add rotate-0 and reflect-x property

Currently, vkms doesn't support any reflection property. Therefore, add
the reflect-x property to vkms through a software implementation of the
operation. This is possible by reverse reading the x axis during the
blending.

Tested with igt@kms_rotation_crc@primary-reflect-x [1] and
igt@kms_rotation_crc@sprite-reflect-x [1].

[1] https://patchwork.freedesktop.org/series/116025/

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-3-mcanal@igalia.com

drm/vram-helper: fix function names in vram helper doc

Refer to drmm_vram_helper_init() instead of the non-existent
drmm_vram_helper_alloc_mm().

Fixes: a5f23a72355d ("drm/vram-helper: Managed vram helpers")
Signed-off-by: Luc Ma <luc@sietium.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/64583db2.630a0220.eb75d.8f51@mx.google.com

drm/bridge: lt9611: Do not generate HFP/HBP/HSA and EOT packet

Do not generate the HS front and back porch gaps, the HSA gap and
EOT packet, as these packets are not required. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403221233.500485-2-marex@denx.de

drm/bridge: lt9211: Do not generate HFP/HBP/HSA and EOT packet

Do not generate the HS front and back porch gaps, the HSA gap and
EOT packet, as these packets are not required. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403221233.500485-1-marex@denx.de

drm/bridge: tc358768: remove unused variable

Remove the unused phy_delay_nsk variable, before it was wrongly used
to compute some register value, the fixed computation is no longer using
it and therefore can be removed.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-10-francesco@dolcini.it

drm/bridge: tc358768: fix THS_TRAILCNT computation

Correct computation of THS_TRAILCNT register.

This register must be set to a value that ensure that
THS_TRAIL > 60 ns + 4 x UI
and
THS_TRAIL > 8 x UI
and
THS_TRAIL < TEOT
with
TEOT = 105 ns + (12 x UI)

with the actual value of THS_TRAIL being

(1 + THS_TRAILCNT) x ByteClk cycle + ((1 to 2) + 2) xHSBYTECLK cycle +
- (PHY output delay)

with PHY output delay being about

(8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-9-francesco@dolcini.it

drm/bridge: tc358768: fix TXTAGOCNT computation

Correct computation of TXTAGOCNT register.

This register must be set to a value that ensure that the
TTA-GO period = (4 x TLPX)

with the actual value of TTA-GO being

4 x (TXTAGOCNT + 1) x (HSByteClk cycle)

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-8-francesco@dolcini.it

drm/bridge: tc358768: fix THS_ZEROCNT computation

Correct computation of THS_ZEROCNT register.

This register must be set to a value that ensure that
THS_PREPARE + THS_ZERO > 145ns + 10*UI

with the actual value of (THS_PREPARE + THS_ZERO) being

((1 to 2) + 1 + (TCLK_ZEROCNT + 1) + (3 to 4)) x ByteClk cycle +
+ HSByteClk x (2 + (1 to 2)) + (PHY delay)

with PHY delay being about

(8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-7-francesco@dolcini.it

drm/bridge: tc358768: fix TCLK_ZEROCNT computation

Correct computation of TCLK_ZEROCNT register.

This register must be set to a value that ensure that
(TCLK-PREPARECNT + TCLK-ZERO) > 300ns

with the actual value of (TCLK-PREPARECNT + TCLK-ZERO) being

(1 to 2) + (TCLK_ZEROCNT + 1)) x HSByteClkCycle + (PHY output delay)

with PHY output delay being about

(2 to 3) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it

drm/bridge: tc358768: fix PLL target frequency

Correctly compute the PLL target frequency, the current formula works
correctly only when the input bus width is 24bit, actually to properly
compute the PLL target frequency what is relevant is the bits-per-pixel
on the DSI link.

No regression expected since the DSI format is currently hard-coded as
MIPI_DSI_FMT_RGB888.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it

drm/bridge: tc358768: fix PLL parameters computation

According to Toshiba documentation the PLL input clock after the divider
should be not less than 4MHz, fix the PLL parameters computation
accordingly.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it

drm/bridge: tc358768: always enable HS video mode

Always enable HS video mode setting the TXMD bit, without this change no
video output is present with DSI sinks that are setting
MIPI_DSI_MODE_LPM flag (tested with LT8912B DSI-HDMI bridge).

Previously the driver was enabling HS mode only when the DSI sink was
not explicitly setting the MIPI_DSI_MODE_LPM, however this is not
correct.

The MIPI_DSI_MODE_LPM is supposed to indicate that the sink is willing
to receive data in low power mode, however clearing the
TC358768_DSI_CONTROL_TXMD bit will make the TC358768 send video in
LP mode that is not the intended behavior.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it

drm/rockchip: vop: Leave vblank enabled in self-refresh

If we disable vblank when entering self-refresh, vblank APIs (like
DRM_IOCTL_WAIT_VBLANK) no longer work. But user space is not aware when
we enter self-refresh, so this appears to be an API violation -- that
DRM_IOCTL_WAIT_VBLANK fails with EINVAL whenever the display is idle and
enters self-refresh.

The downstream driver used by many of these systems never used to
disable vblank for PSR, and in fact, even upstream, we didn't do that
until radically redesigning the state machine in commit 6c836d965bad
("drm/rockchip: Use the helpers for PSR").

Thus, it seems like a reasonable API fix to simply restore that
behavior, and leave vblank enabled.

Note that this appears to potentially unbalance the
drm_crtc_vblank_{off,on}() calls in some cases, but:
(a) drm_crtc_vblank_on() documents this as OK and
(b) if I do the naive balancing, I find state machine issues such that
    we're not in sync properly; so it's easier to take advantage of (a).

This issue was exposed by IGT's kms_vblank tests, and reported by
KernelCI. The bug has been around a while (longer than KernelCI
noticed), but was only exposed once self-refresh was bugfixed more
recently, and so KernelCI could properly test it. Some other notes in:

  https://lore.kernel.org/dri-devel/Y6OCg9BPnJvimQLT@google.com/
  Re: renesas/master bisection: igt-kms-rockchip.kms_vblank.pipe-A-wait-forked on rk3399-gru-kevin

== Backporting notes: ==

Marking as 'Fixes' commit 6c836d965bad ("drm/rockchip: Use the helpers
for PSR"), but it probably depends on commit bed030a49f3e
("drm/rockchip: Don't fully disable vop on self refresh") as well.

We also need the previous patch ("drm/atomic: Allow vblank-enabled +
self-refresh "disable""), of course.

v3:
* no update

v2:
* skip unnecessary lock/unlock

Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <stable@vger.kernel.org>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Link: https://lore.kernel.org/dri-devel/Y5itf0+yNIQa6fU4@sirena.org.uk/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.2.Ic07cba4ab9a7bd3618a9e4258b8f92ea7d10ae5a@changeid

drm/atomic: Allow vblank-enabled + self-refresh "disable"

The self-refresh helper framework overloads "disable" to sometimes mean
"go into self-refresh mode," and this mode activates automatically
(e.g., after some period of unchanging display output). In such cases,
the display pipe is still considered "on", and user-space is not aware
that we went into self-refresh mode. Thus, users may expect that
vblank-related features (such as DRM_IOCTL_WAIT_VBLANK) still work
properly.

However, we trigger the WARN_ONCE() here if a CRTC driver tries to leave
vblank enabled.

Add a different expectation: that CRTCs *should* leave vblank enabled
when going into self-refresh.

This patch is preparation for another patch -- "drm/rockchip: vop: Leave
vblank enabled in self-refresh" -- which resolves conflicts between the
above self-refresh behavior and the API tests in IGT's kms_vblank test
module.

== Some alternatives discussed: ==

It's likely that on many display controllers, vblank interrupts will
turn off when the CRTC is disabled, and so in some cases, self-refresh
may not support vblank. To support such cases, we might consider
additions to the generic helpers such that we fire vblank events based
on a timer.

However, there is currently only one driver using the common
self-refresh helpers (i.e., rockchip), and at least as of commit
bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh"),
the CRTC hardware is powered enough to continue to generate vblank
interrupts.

So we chose the simpler option of leaving vblank interrupts enabled. We
can reevaluate this decision and perhaps augment the helpers if/when we
gain a second driver that has different requirements.

v3:
* include discussion summary

v2:
* add 'ret != 0' warning case for self-refresh
* describe failing test case and relation to drm/rockchip patch better

Cc: <stable@vger.kernel.org> # dependency for "drm/rockchip: vop: Leave
# vblank enabled in self-refresh"
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.1.I3904f697863649eb1be540ecca147a66e42bfad7@changeid

drm/bridge: ti-sn65dsi83: Fix enable error path

If PLL locking failed, the regulator needs to be disabled again.

Fixes: 5664e3c907e2 ("drm/bridge: ti-sn65dsi83: Add vcc supply regulator support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504065316.2640739-1-alexander.stein@ew.tq-group.com

drm/udl: delete dead code

The "unode" pointer cannot be NULL here and checking for it causes
Smatch warnings:

   drivers/gpu/drm/udl/udl_main.c:259 udl_get_urb_locked()
   warn: can 'unode' even be NULL?

Fortunately, it's just harmless dead code which can be removed.  It's
left over from commit c5c354a3a472 ("drm/udl: Fix inconsistent urbs.count
value during udl_free_urb_list()").

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/e0e35421-8746-43b6-971e-e25d1cd1d6a7@kili.mountain

drm/scheduler: mark jobs without fence as canceled

When no hw fence is provided for a job that means that the job didn't executed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427122726.1290170-1-christian.koenig@amd.com

drm/rockchip: cdn-dp: call drm_connector_update_edid_property() unconditionally

Calling drm_connector_update_edid_property() should be done
unconditionally instead of depending on the number of modes added. Also
match the call order in inno_hdmi and rk3066_hdmi.

Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bb733eccfb389533cc6e207689be845164a1ed91.1662036058.git.jani.nikula@intel.com

drm/sti/sti_hdmi: convert to using is_hdmi from display info

Prefer the parsed results for is_hdmi in display info over calling
drm_detect_hdmi_monitor(). Remove the now redundant hdmi_monitor member
from struct sti_hdmi.

Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alain Volmat <avolmat@me.com>
Link: https://patchwork.freedesktop.org/patch/msgid/74fbd7a83712009734534d92e5499d4d87f0c53b.1662036058.git.jani.nikula@intel.com

drm/sysfs: Link DRM connectors to corresponding Type-C connectors

Create a symlink pointing to USB Type-C connector for DRM connectors
when they are created. The link will be created only if the firmware is
able to describe the connection beween the two connectors.

Currently, even if a display uses a USB Type-C port, there is no way for
the userspace to find which port is used for which display. With the
symlink, display information would be accessible from Type-C connectors
and port information would be accessible from DRM connectors.

Associating the two subsystems, userspace would have potential to expose
and utilize more complex information. ChromeOS intend to use this
information for metrics collection. For example, we want to tell which
port is deriving which displays. Also, combined with USB PD information,
we can tell whether user is charging their device through display.
Chromium patch for parsing the symlink from the kernel is at
http://crrev.com/c/4317207.

We already have a framework in typec port-mapper.c where it goes through
component devices and runs the bind functions for those with matching
_PLD (physical location of device).
https://elixir.bootlin.com/linux/v5.18.1/source/drivers/usb/typec/
port-mapper.c
Since _PLD is ACPI specific field, this linking would only work on ACPI
x86 as long as _PLD field for Type-C connectors and DRM connectors are
correctly added to the firmware.

Currently, USB ports and USB4 ports are added as components to create a
symlink with Type C connector.
USB:
https://lore.kernel.org/all/20211223082349.45616-1-heikki.krogerus
@linux.intel.com/
USB4:
https://lore.kernel.org/all/20220418175932.1809770-3-wonchung@google.com/
So, we follow the same pattern in this patch.

Signed-off-by: Won Chung <wonchung@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427165813.2844530-1-wonchung@google.com

drm/sysfs: Expose DRM connector id in each connector sysfs

Expose DRM connector id in device sysfs so that we can map the connector
id to the connector syspath. Currently, even if we can derive the
connector id from modeset, we do not have a way to find the
corresponding connector's syspath.

This is helpful when determining the root connector of MST tree. When a
tree of multiple MST hub is connected to the system, modeset describes
the tree in the PATH blob. For example, consider the following scenario.

+-------------+
| Source      |    +-------------+
| (Device)    |    | BranchX     |
|             |    | (MST)       |
|       [conn6]--->|       [port1]--->DisplayA
+-------------+    |             |
                   |             |    +-------------+
                   |             |    | BranchY     |
                   |             |    | (MST)       |
                   |       [port2]--->|       [port1]----->DisplayB
                   +-------------+    |             |
                                      |       [port2]----->DisplayC
                                      +-------------+

DPMST connector of DisplayA would have "mst:6-1" PATH.
DPMST connector of DisplayB would have "mst:6-2-1" PATH.
DPMST connector of DisplayC would have "mst:6-2-2" PATH.

Given that connector id of 6 is the root of the MST connector tree, we
can utilize this patch to parse through DRM connectors sysfs and find
which connector syspath corresponds to the root connector (id == 6).

ChromeOS intend to use this information for metrics collection. For
example, we want to tell which port is deriving which displays even with
a MST hub. Chromium patch for parsing DRM connector id from the kernel
is at http://crrev.com/c/4317207.

Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329014455.1990104-1-wonchung@google.com

drm/bridge: it6505: Move a variable assignment behind a null pointer check in receive_timing_debugfs_show()

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “receive_timing_debugfs_show”.

Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “vid” behind the null pointer check.

This issue was detected by using the Coccinelle software.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patchwork.freedesktop.org/patch/msgid/fa69384f-1485-142b-c4ee-3df54ac68a89@web.de
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>

drm/uapi: Document CTM matrix better

Document in which order the CTM matrix elements are stored.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230411222931.15127-2-ville.syrjala@linux.intel.com
Reviewed-by: Xaver Hugl <xaver.hugl@gmail.com>
Acked-by: Simon Ser <contact@emersion.fr>

drm/meson: set variables meson_hdmi_* storage-class-specifier to static

smatch has several similar warnings to
drivers/gpu/drm/meson/meson_venc.c:189:28: warning: symbol
'meson_hdmi_enci_mode_480i' was not declared. Should it be static?

These variables are only used in their defining file so should be static

Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230423145300.3937831-1-trix@redhat.com

drm/panel: st7703: Add Anbernic RG353V-V2 Panel Support

The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the
Anbernic RG353V handheld gaming device. Add support for it.

Unfortunately it appears this controller is not able to support 120hz
or 100hz mode like the first revision panel.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426143213.4178586-4-macroalpha82@gmail.com

drm/panel: st7703: Rename CMD_UNKNOWN_C6 to CMD_SETECO

A later revision of the datasheet for the ST7703 refers to this command
as "SETECO".

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426143213.4178586-3-macroalpha82@gmail.com

dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible

The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel.
It's based on the ST7703 LCD controller just like rocktech,jh057n00900.
It's used in a 2nd revision of the Anbernic RG353V handheld gaming
device. Like the first revision of the RG353V the control chip is known
but the panel itself is unknown, so name it for the device.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426143213.4178586-2-macroalpha82@gmail.com

drm/doc/rfc: Introduce the merge plan for the Xe driver.

Let’s establish a merge plan for Xe, by writing down clear pre-merge goals, in
order to avoid unnecessary delays.

This initial document starts with a TODO list containing items with clear and
measurable key results. Xe’s initial pull request should only be sent to
dri-devel after all the items are clearly resolved.

Since many of them involve some level of a community consensus, in many cases,
the consensus will be reached in follow-up patches to this document with more
details of the API or helpers that will be developed or modified.

Besides of the items that are highlighted in this document, it is important
to highlight that Oded, has been volunteered to give the overall ack on Xe
driver as the way to confirm that it looks good for upstream.

v2: Incorporated Daniel's feedback:
    - Do not make long-running compute a blocker.
    - Add a mention to drm-exec that that ties to vm_bind and long-running
      compute jobs. Then I also added GPUVA since I recently noticed that this
      ties also to the work Matt is doing on that front.
    - Added the devcoredump section.
    - Add the mention to Oded being volunteered for the overall ack.

v3: Reword a bit the Async VM_BIND to incorporate Daniel's feedback on ensuring
    the async vmbind consensus explicitly include Mesa, besides other kernel
    drivers.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Luis Strano <luis.strano@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419191913.158807-1-rodrigo.vivi@intel.com

drm/vkms: drop full alpha blending TODO

Now that VKMS supports full alpha blending on all planes, drop the
"ARGB format on primary plane" and "Full alpha blending on all planes"
tasks from the TODO list.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420232228.273340-2-mcanal@igalia.com

drm/vkms: allow full alpha blending on all planes

Before commit bc0d7fdefec6 ("drm: vkms: Supports to the case where
primary plane doesn't match the CRTC"), the composition was executed on
top of the primary plane. Therefore, the primary plane was not able to
support the alpha channel. After commit bc0d7fdefec6, this is possible,
as the composition is now executed on top of the CRTC.

So, allow all planes to support the alpha channel, making full alpha
blending possible in vkms.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420232228.273340-1-mcanal@igalia.com

arch/x86: Include <asm/fb.h> in fbdev source file

Move the implementation of fb_pgprotect() to fbdev.c and include
<asm/fb.h>. Fixes the following warning:

  ../arch/x86/video/fbdev.c:14:5: warning: no previous prototype for 'fb_is_primary_device' [-Wmissing-prototypes]
     14 | int fb_is_primary_device(struct fb_info *info)
        |     ^~~~~~~~~~~~~~~~~~~~

Just including <asm/fb.h> results in a number of built-in errors
about undefined function. Moving fb_pgprotect() to the source file
avoids the required include statements in the header. The function
is only called occasionally from fb_mmap(), [1] so having it as static
inline had no benefit.

While at it, fix the codying style in fbdev.c.

Link: https://elixir.bootlin.com/linux/v6.3-rc7/source/drivers/video/fbdev/core/fbmem.c#L1404
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424084751.14641-1-tzimmermann@suse.de

drm/bridge: tc358768: Add atomic_get_input_bus_fmts() implementation

Add atomic_get_input_bus_fmts() implementation, tc358768 has a parallel
RGB input interface with the actual bus format depending on the amount
of parallel input data lines.

Without this change when the tc358768 is used with less than 24bit the
color mapping is completely wrong.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330095941.428122-7-francesco@dolcini.it

drm/vc4: hdmi: Add BT.2020 Support

Even though we report that we support the BT.2020 Colorspace, we were
always using the BT.709 conversion matrices. Let's add the BT.2020 ones.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-9-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Add BT.601 Support

Even though we report that we support the BT601 Colorspace, we were
always using the BT.709 conversion matrices. Let's add the BT601 ones.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-8-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Add a function to retrieve the CSC matrix

The CSC matrix to use depends on the output format, its range and the
colorspace.

Since we're going to add more colorspaces, let's move the CSC matrix
retrieval to a function.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-7-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Rework the CSC matrices organization

The CSC matrices were stored as separate matrix for each colorspace, and
if we wanted a limited or full RGB output.

This created some gaps in our support and we would not always pick the
relevant matrix.

Let's rework our data structure to store one per colorspace, and then a
matrix for limited range and one for full range. This makes us add a new
matrix to support full range BT709 YUV output.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-6-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Swap CSC matrix channels for YUV444

YUV444 and YUV422 actually require the same matrix, but programmed
differently.

We've dealt with it in the past by having two matrices, with the one
for YUV444 reordered to accomodate the hardware.

This gets in the way of subsequent reworks so let's define a function
that will take the coefficients swap into account, and remove the now
redundant YUV444 matrix.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-5-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Rename full range helper

The VC4 HDMI driver has a helper function to figure out whether full
range or limited range RGB is being used called
vc4_hdmi_is_full_range_rgb().

We'll need it to support other colorspaces, so let's rename it to
vc4_hdmi_is_full_range().

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-4-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Add Broadcast RGB property to allow override of RGB range

Copy Intel's "Broadcast RGB" property semantics to add manual override
of the HDMI pixel range for monitors that don't abide by the content
of the AVI Infoframe.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-3-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Update all the planes if the TV margins are changed

On VC4, the TV margins on the HDMI connector are implemented by scaling
the planes.

However, if only the TV margins or the connector are changed by a new
state, the planes ending up on that connector won't be. Thus, they won't
be updated properly and we'll effectively ignore that change until the
next commit affecting these planes.

Let's make sure to add all the planes attached to the connector so that
we can update them properly.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-2-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: Switch to container_of_const

container_of_const() allows to preserve the pointer constness and is
thus more flexible than inline functions.

Let's switch all our instances of container_of() to
container_of_const().

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-1-bdd54f66884e@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vkms: isolate pixel conversion functionality

Currently, the pixel conversion functions repeat the same loop to
iterate the rows. Instead of repeating the same code for each pixel
format, create a function to wrap the loop and isolate the pixel
conversion functionality.

Suggested-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-2-mcanal@igalia.com

drm/test: Add test cases for drm_rect_rotate_inv()

Insert a parameterized test for the drm_rect_rotate_inv() to ensure its
correctness and prevent future regressions. The test covers all rotation
modes.

It uses the same test cases from drm_test_rect_rotate().

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418230146.461129-6-arthurgrillo@riseup.net

drm/tests: Add test cases for drm_rect_rotate()

Insert a parameterized test for the drm_rect_rotate() to ensure
correctness and prevent future regressions.

All possible rotation modes are covered by the test.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418230146.461129-5-arthurgrillo@riseup.net

drm/tests: Add test cases for drm_rect_calc_vscale()

Insert parameterized test for the drm_rect_calc_vscale() to ensure
correctness and prevent future regressions. Besides the test for the
usual case, tests the exceptions.

It uses the same struct from drm_rect_calc_hscale().

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418230146.461129-4-arthurgrillo@riseup.net

drm/tests: Add test cases for drm_rect_calc_hscale()

Insert parameterized test for the drm_rect_calc_hscale() to ensure
correctness and prevent future regressions. Besides the test for the
usual case, tests the exceptions.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418230146.461129-3-arthurgrillo@riseup.net

drm/tests: Add test cases for drm_rect_intersect()

Insert parameterized tests for the drm_rect_intersect() to ensure
correctness and prevent future regressions.

Also, create a helper for testing if two drm_rects are equal.

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418230146.461129-2-arthurgrillo@riseup.net

Merge drm/drm-next into drm-misc-next

Backmerging to get the exynos fbdev updates.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/scheduler: add drm_sched_entity_error and use rcu for last_scheduled

Switch to using RCU handling for the last scheduled job and add a
function to return the error code of it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-2-christian.koenig@amd.com

drm/scheduler: properly forward fence errors

When a hw fence is signaled with an error properly forward that to the
finished fence.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420115752.31470-1-christian.koenig@amd.com

drm/tve200: Use devm_platform_ioremap_resource()

Convert platform_get_resource(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource(), as this is exactly what this
function does.

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421091319.79744-1-yang.lee@linux.alibaba.com

Merge tag 'exynos-drm-next-for-v6.4-2' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

A patch series for implementing fbdev emulation as in-kernel client.

- This patch series refactors fbdev callbacks to DRM client functions and
simplifies fbdev emulation initialization including some code cleanups.
The changes make fbdev emulation behave like a regular DRM client.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417100624.35229-1-inki.dae@samsung.com

Merge tag 'drm-intel-next-fixes-2023-04-20-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Active port PLL MST fix for second stream, CSC plane index fix,
null and oob array deref fixes and selftest memory leak fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZEDz9ZedyZVyFXxU@jlahtine-mobl.ger.corp.intel.com

drm/sti: Drop of_gpio header

This driver includes the deprecated OF GPIO header <linux/of_gpio.h>
yet fail to use symbols from it, so drop this include.

Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Acked-by: Alain Volmat <avolmat@me.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812205746.609107-5-mairacanal@riseup.net

drm/bridge: anx7625: Drop of_gpio header

This driver includes the deprecated OF GPIO header <linux/of_gpio.h>
yet fail to use symbols from it, so drop the include.

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812205746.609107-2-mairacanal@riseup.net

drm/display: Add missing OLED Vesa brightnesses definitions

This commit adds missing luminance control registers to enable a more
standard way (VESA) to deal with eDP luminance control.

Cc: Anthony Koo <anthony.koo@amd.com>
Cc: Iswara Negulendran <iswara.nagulendran@amd.com>
Cc: Felipe Clark <felipe.clark@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412000943.429031-1-Rodrigo.Siqueira@amd.com

drm/panel: simple: Add InnoLux G070ACE-L01

Add InnoLux G070ACE-L01 7" 800x480 TFT LCD with WLED backlight panel
support. Timing data was extracted from datasheet and vendor provided
EDID file.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201-innolux-g070ace-v2-2-2371e251dd40@skidata.com

dt-bindings: display: simple: add support for InnoLux G070ACE-L01

Add Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel compatible
string.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201-innolux-g070ace-v2-1-2371e251dd40@skidata.com

drm/armada: Implement fbdev emulation as in-kernel client

Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.

Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to armada_fbdev_setup() after armada has registered its
DRM device. As in most drivers, aramda's fbdev emulation now acts
like a regular DRM client.

The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.

A call to drm_dev_unregister() releases the client automatically.
No further action is required within armada. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-5-tzimmermann@suse.de

drm/armada: Initialize fbdev DRM client

Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-4-tzimmermann@suse.de

drm/armada: Hide fbdev support behind config option

Only build armada's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION
has been enabled. No functional changes, but allows to build armada
without fbdev.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-3-tzimmermann@suse.de

drm/armada: Include <linux/of.h>

Include <linux/of.h> to get declarations of of_node_put() and
of_device_is_available(). No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-2-tzimmermann@suse.de

drm/bridge: ti-sn65dsi86: Implement wait_hpd_asserted

This bridge doesn't actually implement HPD due to it being way too slow
but instead expects the panel driver to wait enough to assume HPD is
asserted. However some panels (such as the generic 'edp-panel') expect
the bridge to deal with the delay and pass maximum delay to the aux
instead.

In order to support such panels, add a dummy implementation of wait
that would just sleep the maximum delay and assume no failure has
happened.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230408082014.235425-1-nikita@trvn.ru

arch/x86: Implement <asm/fb.h> with generic helpers

Include <asm-generic/fb.h> and set the required preprocessor tokens
correctly. x86 now implements its own set of fb helpers, but still
follows the overall pattern of the other <asm/fb.h> files.

v3:
* clarified commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-20-tzimmermann@suse.de

arch/sparc: Implement <asm/fb.h> with generic helpers

Replace sparc64's fb_pgprotect() with the generic one
from <asm-generic/fb.h>. On sparc, pgprot_writecombine() and
pgprot_noncached() are the same; hence no functional changes

v3:
* use default implementation for fb_pgprotect() on
sparc64 (Arnd)
v2:
* restore the original fb_pgprotect()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-19-tzimmermann@suse.de

arch/sparc: Implement fb_is_primary_device() in source file

Other architectures implment fb_is_primary_device() in a source
file. Do the same on sparc. No functional changes, but allows to
remove several include statement from <asm/fb.h>.

v2:
* don't include <asm/prom.h> in header file

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-18-tzimmermann@suse.de

arch/sh: Implement <asm/fb.h> with generic helpers

Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.

v2:
* use default implementation for fb_pgprotect() (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-17-tzimmermann@suse.de

arch/powerpc: Implement <asm/fb.h> with generic helpers

Replace the architecture's fb_is_primary_device() with the generic
one from <asm-generic/fb.h>. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-16-tzimmermann@suse.de

arch/parisc: Implement <asm/fb.h> with generic helpers

Replace the architecture's fbdev helpers with the generic ones
from <asm-generic/fb.h>. On PARISC, pgprot_writecombine() and
pgprot_noncached() are the same; hence no functional changes.

v3:
* use default implementation for fb_pgprotect() (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-15-tzimmermann@suse.de

arch/parisc: Implement fb_is_primary_device() under arch/parisc

Move PARISC's implementation of fb_is_primary_device() into the
architecture directory. This the place of the declaration and
where other architectures implement this function. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-14-tzimmermann@suse.de

arch/parisc: Remove trailing whitespaces

Fix trailing whitespaces. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-13-tzimmermann@suse.de

video: Move HP PARISC STI core code to shared location

STI core files have been located in console and fbdev code. Move
the source code and header to the directories for video helpers.
Also update the config and build rules such that the code depends
on the config symbol CONFIG_STI_CORE, which STI console and STI
framebuffer select automatically.

Cleans up the console makefile and prepares PARISC to implement
fb_is_primary_device() within the arch/ directory. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-12-tzimmermann@suse.de

video: Remove trailing whitespaces

Fix trailing whitespaces. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-11-tzimmermann@suse.de

arch/mips: Implement <asm/fb.h> with generic helpers

Replace the architecture's fb_is_primary_device() with the generic
one from <asm-generic/fb.h>. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-10-tzimmermann@suse.de

arch/m68k: Implement <asm/fb.h> with generic helpers

Replace the architecture's fb_is_primary_device() with the generic
one from <asm-generic/fb.h>. No functional changes.

v2:
* provide empty fb_pgprotect() on non-MMU systems

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-9-tzimmermann@suse.de

arch/m68k: Merge variants of fb_pgprotect() into single function

Merge all variants of fb_pgprotect() into a single function body.
There are two different cases for MMU systems. For non-MMU systems,
the function body will be empty. No functional changes, but this
will help with the switch to <asm-generic/fb.h>.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-8-tzimmermann@suse.de

arch/loongarch: Implement <asm/fb.h> with generic helpers

Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.

v2:
* use default implementation for fb_pgprotect() (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-7-tzimmermann@suse.de

arch/ia64: Implement <asm/fb.h> with generic helpers

Replace the architecture's fb_is_primary_device() with the generic
one from <asm-generic/fb.h>. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-6-tzimmermann@suse.de

arch/arm64: Implement <asm/fb.h> with generic helpers

Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.

v2:
* use default implementation for fb_pgprotect() (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-5-tzimmermann@suse.de

arch/arm: Implement <asm/fb.h> with generic helpers

Replace the architecture's fbdev helpers with the generic
ones from <asm-generic/fb.h>. No functional changes.

v2:
* use default implementation for fb_pgprotect() (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-4-tzimmermann@suse.de

arch/arc: Implement <asm/fb.h> with generic helpers

Replace the architecture's fbdev helpers with the generic ones from
<asm-generic/fb.h>. On arc, pgprot_writecombine() and pgprot_noncached()
are the same; hence no functional changes.

v3:
* use default implementation for fb_pgprotect() (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-3-tzimmermann@suse.de

fbdev: Prepare generic architecture helpers

Generic implementations of fb_pgprotect() and fb_is_primary_device()
have been in the source code for a long time. Prepare the header file
to make use of them.

Improve the code by using an inline function for fb_pgprotect()
and by removing include statements. The default mode set by
fb_pgprotect() is now writecombine, which is what most platforms
want.

Symbols are protected by preprocessor guards. Architectures that
provide a symbol need to define a preprocessor token of the same
name and value. Otherwise the header file will provide a generic
implementation. This pattern has been taken from <asm/io.h>.

v3:
* include the correct header files
v2:
* use writecombine mappings by default (Arnd)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-2-tzimmermann@suse.de

drm/gem: Check for valid formats

Currently, drm_gem_fb_create() doesn't check if the pixel format is
supported, which can lead to the acceptance of invalid pixel formats
e.g. the acceptance of invalid modifiers. Therefore, add a check for
valid formats on drm_gem_fb_create().

Note that this check is only valid for atomic drivers, because, for
non-atomic drivers, checking drm_any_plane_has_format() is not
possible since the format list for the primary plane is fake, and we'd
therefore reject valid formats.

Adding this check to drm_gem_fb_create() will guarantee that the
igt@kms_addfb_basic@addfb25-bad-modifier IGT test passes for drivers
using this callback.

This commit is a recapture of a series sent a while ago. Initially,
I sent a patch [1] similar to this one in which I introduced the
format check to drm_gem_fb_create().

Based on the feedback on the patch, I placed the check inside
framebuffer_check() [2] so that it wouldn't be needed to hit any
driver-specific code path when the check fails. Therefore, we could
remove the check from the specific drivers (i915, amdgpu, and vmwgfx).

But, with some new feedback, it was shown that introducing this check
inside framebuffer_check() is problematic for the i915 driver [3].
For the i915 driver, in the legacy case, in which we don't get the
modifier from the userspace, i915's fb_create hook computes the right
modifier, which isn't necessarily linear. Therefore, if we check the
modifier before that point, we might get wrong answers.

So, I kept the check inside the i915 driver and removed the check from
amdgpu and vmwgfx [4]. But, this yet hasn't solved the i915 problem [5].

As we cannot add the check inside framebuffer_check() without
affecting the i915 behavior, this commit went back to the original
patch. This way we can guarantee a more uniform behavior from the
drivers that use the drm_gem_fb_create() callback.

[1] https://lore.kernel.org/dri-devel/20230103125322.855089-1-mcanal@igalia.com/T/
[2] https://lore.kernel.org/dri-devel/20230109105807.18172-1-mcanal@igalia.com/T/
[3] https://lore.kernel.org/dri-devel/Y8AAdW2y7zN7DCUZ@intel.com/
[4] https://lore.kernel.org/dri-devel/20230113112743.188486-1-mcanal@igalia.com/T/
[5] https://lore.kernel.org/dri-devel/Y8FXWvEhO7GCRKVJ@intel.com/

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412142923.136707-1-mcanal@igalia.com

drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams

The port PLL selection needs to be up-to-date in the CRTC state of both
the primary and all secondary MST streams. The commit removing the
encoder update_prepare/complete hooks (see Fixes: below), stopped doing
this for secondary streams, fix this up.

Fixes: 0f752b2178c9 ("drm/i915: Remove the encoder update_prepare()/complete() hooks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com
(cherry picked from commit 27ac123b454417ea92d77c13a5d94655f53b759c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/scheduler: set entity to NULL in drm_sched_entity_pop_job()

It already happend a few times that patches slipped through which
implemented access to an entity through a job that was already removed
from the entities queue. Since jobs and entities might have different
lifecycles, this can potentially cause UAF bugs.

In order to make it obvious that a jobs entity pointer shouldn't be
accessed after drm_sched_entity_pop_job() was called successfully, set
the jobs entity pointer to NULL once the job is removed from the entity
queue.

Moreover, debugging a potential NULL pointer dereference is way easier
than potentially corrupted memory through a UAF.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>

drm/nouveau/therm: Move an assignment statement behind a null pointer check in two functions

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the functions “nvkm_fanpwm_create” and “nvkm_fantog_create”.

Thus avoid the risk for undefined behaviour by moving the assignment
for the data structure member “fan” behind two null pointer checks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d0215dc-74d4-2c42-2eee-7a5fcf62b9f1@web.de

drm/nouveau/pci: Move an expression into a function call parameter in nvkm_pcie_set_link()

The variable “pbus” was read only once in the implementation of
the function “nvkm_pcie_set_link”.
Thus move the usage of an expression into a parameter for a function call.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/04e2c1f5-26c7-9a23-5861-3d8757556cdd@web.de

drm/nouveau/pci: Move a variable assignment behind condition checks in nvkm_pcie_set_link()

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvkm_pcie_set_link”.

Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “subdev” behind some condition checks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b31019b1-bb73-ed93-3378-e551e17a4f32@web.de

drm/nouveau/clk: Move a variable assignment behind a null pointer check in nvkm_pstate_new()

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvkm_pstate_new”.

Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “cstate” behind the null pointer check.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6435d829-2c9b-a3f7-c8cd-cf923508a092@web.de

drm/nouveau/bios/power_budget: Move an expression into a macro call parameter in nvbios_power_budget_header()

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nvbios_power_budget_header”.

Thus avoid the risk for undefined behaviour by moving the usage
of an expression into a parameter for a macro call in one if branch.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/529fe82e-59f0-71a2-1e33-b051f833b67c@web.de

drm/nouveau/debugfs: Replace five seq_printf() calls by seq_puts() in nouveau_debugfs_pstate_get()

Five strings which did not contain a data format specification should
be put into a sequence. Thus use the corresponding function “seq_puts”.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bdee7e41-094a-91d1-3f6f-56df402d70b7@web.de

drm/nouveau/debugfs: Use seq_putc() in nouveau_debugfs_pstate_get()

A single character (line break) should be put into a sequence.
Thus use the corresponding function “seq_putc”.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6f9b34e-58d9-b1aa-8b12-8d4a55153d1d@web.de

drm/nouveau/debugfs: Move a variable assignment behind a null pointer check in nouveau_debugfs_pstate_get()

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nouveau_debugfs_pstate_get”.

Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “ctrl” behind the null pointer check.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5b7b99f7-1692-74e5-4b1e-cfa14dad7c57@web.de

drm/nouveau/debugfs: Move an expression into a function call parameter in nouveau_debugfs_pstate_set()

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “nouveau_debugfs_pstate_set”.

Thus avoid the risk for undefined behaviour by moving the usage
of an expression into a parameter for a function call at the end.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1903e057-57d3-e12e-da37-008e23afd2e2@web.de