Bartosz Golaszewski [Fri, 30 Nov 2018 08:20:58 +0000 (09:20 +0100)]
net: cadence: switch to using nvmem_get_mac_address()
We now have a generalized helper routine to read the MAC address from
nvmem which takes struct device as argument. The nvmem subsystem will
then try device tree first before all other potential providers.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bartosz Golaszewski [Fri, 30 Nov 2018 08:20:57 +0000 (09:20 +0100)]
net: ethernet: provide nvmem_get_mac_address()
We already have of_get_nvmem_mac_address() but some non-DT systems want
to read the MAC address from NVMEM too. Implement a generalized routine
that takes struct device as argument.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NeilBrown [Thu, 29 Nov 2018 23:26:50 +0000 (10:26 +1100)]
rhashtable: detect when object movement between tables might have invalidated a lookup
Some users of rhashtables might need to move an object from one table
to another - this appears to be the reason for the incomplete usage
of NULLS markers.
To support these, we store a unique NULLS_MARKER at the end of
each chain, and when a search fails to find a match, we check
if the NULLS marker found was the expected one. If not, the search
may not have examined all objects in the target bucket, so it is
repeated.
The unique NULLS_MARKER is derived from the address of the
head of the chain. As this cannot be derived at load-time the
static rhnull in rht_bucket_nested() needs to be initialised
at run time.
Any caller of a lookup function must still be prepared for the
possibility that the object returned is in a different table - it
might have been there for some time.
Note that this does NOT provide support for other uses of
NULLS_MARKERs such as allocating with SLAB_TYPESAFE_BY_RCU or changing
the key of an object and re-inserting it in the same table.
These could only be done safely if new objects were inserted
at the *start* of a hash chain, and that is not currently the case.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Dec 2018 23:26:34 +0000 (15:26 -0800)]
Merge branch 'hns3-ethtool-dump'
Salil Mehta says:
====================
Adds VF/PF PCIe reg dump(ethtool -d) support to HNS3 driver
This patchset adds VF/PF PCIe register dump support to HNS3 VF and PF
driver using "ethtool -d" command.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 29 Nov 2018 16:40:59 +0000 (16:40 +0000)]
net: hns3: Adds support to dump(using ethool-d) PCIe regs in HNS3 PF driver
This patch adds support to dump PF PCIe registers using ethtool -d
for HNS3 PF Driver.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Thu, 29 Nov 2018 16:40:58 +0000 (16:40 +0000)]
net: hns3: Support "ethtool -d" for HNS3 VF driver
This patch adds "ethtool -d" support for HNS3 VF Driver.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 27 Nov 2018 21:30:14 +0000 (22:30 +0100)]
net: phy: improve generic EEE ethtool functions
So far the two functions consider neither member eee_enabled nor
eee_active. Therefore network drivers have to do this in some kind
of glue code. I think this can be avoided.
Getting EEE parameters:
When not advertising any EEE mode, we can't consider EEE to be enabled.
Therefore interpret "EEE enabled" as "we advertise at least one EEE
mode". It's similar with "EEE active": interpret it as "EEE modes
advertised by both link partner have at least one mode in common".
Setting EEE parameters:
If eee_enabled isn't set, don't advertise any EEE mode and restart
aneg if needed to switch off EEE. If eee_enabled is set and
data->advertised is empty (e.g. because EEE was disabled), advertise
everything we support as default. This way EEE can easily switched
on/off by doing ethtool --set-eee <if> eee on/off, w/o any additional
parameters.
The changes to both functions shouldn't break any existing user.
Once the changes have been applied, at least some users can be
simplified.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Dec 2018 22:16:14 +0000 (14:16 -0800)]
Merge branch 'VXLAN-underlay-VRF'
Alexis Bauvin says:
====================
net: Add VRF support for VXLAN underlay
v6 -> v7:
- proper locking for device in udp_tunnel following Sabrina Dubroca's advice
v5 -> v6:
- remove automatic rebinding patch following Roopa Prabhu's advice
v4 -> v5:
- move test script to its own patch (6/6)
- add schematic for test script
- apply David Ahern comments to the test script
v3 -> v4:
- rename vxlan_is_in_l3mdev_chain to netdev_is_upper master
- move it to net/core/dev.c
- make it return bool instead of int
- check if remote_ifindex is zero before resolving the l3mdev
- add testing script
v2 -> v3:
- fix build when CONFIG_NET_IPV6 is off
- fix build "unused l3mdev_master_upper_ifindex_by_index" build error with some
configs
v1 -> v2:
- move vxlan_get_l3mdev from vxlan driver to l3mdev driver as
l3mdev_master_upper_ifindex_by_index
- vxlan: rename variables named l3mdev_ifindex to ifindex
v0 -> v1:
- fix typos
We are trying to isolate the VXLAN traffic from different VMs with VRF as shown
in the schemas below:
+-------------------------+ +----------------------------+
| +----------+ | | +------------+ |
| | | | | | | |
| | tap-red | | | | tap-blue | |
| | | | | | | |
| +----+-----+ | | +-----+------+ |
| | | | | |
| | | | | |
| +----+---+ | | +----+----+ |
| | | | | | | |
| | br-red | | | | br-blue | |
| | | | | | | |
| +----+---+ | | +----+----+ |
| | | | | |
| | | | | |
| | | | | |
| +----+--------+ | | +--------------+ |
| | | | | | | |
| | vxlan-red | | | | vxlan-blue | |
| | | | | | | |
| +------+------+ | | +-------+------+ |
| | | | | |
| | VRF | | | VRF |
| | red | | | blue |
+-------------------------+ +----------------------------+
| |
| |
+---------------------------------------------------------+
| | | |
| | | |
| | +--------------+ | |
| | | | | |
| +---------+ eth0.2030 +---------+ |
| | 10.0.0.1/24 | |
| +-----+--------+ VRF |
| | green|
+---------------------------------------------------------+
|
|
+----+---+
| |
| eth0 |
| |
+--------+
iproute2 commands to reproduce the setup:
ip link add green type vrf table 1
ip link set green up
ip link add eth0.2030 link eth0 type vlan id 2030
ip link set eth0.2030 master green
ip addr add 10.0.0.1/24 dev eth0.2030
ip link set eth0.2030 up
ip link add blue type vrf table 2
ip link set blue up
ip link add br-blue type bridge
ip link set br-blue master blue
ip link set br-blue up
ip link add vxlan-blue type vxlan id 2 local 10.0.0.1 dev eth0.2030 \
port 4789
ip link set vxlan-blue master br-blue
ip link set vxlan-blue up
ip link set tap-blue master br-blue
ip link set tap-blue up
ip link add red type vrf table 3
ip link set red up
ip link add br-red type bridge
ip link set br-red master red
ip link set br-red up
ip link add vxlan-red type vxlan id 3 local 10.0.0.1 dev eth0.2030 \
port 4789
ip link set vxlan-red master br-red
ip link set vxlan-red up
ip link set tap-red master br-red
ip link set tap-red up
We faced some issue in the datapath, here are the details:
* Egress traffic:
The vxlan packets are sent directly to the default VRF because it's where the
socket is bound, therefore the traffic has a default route via eth0. the
workaround is to force this traffic to VRF green with ip rules.
* Ingress traffic:
When receiving the traffic on eth0.2030 the vxlan socket is unreachable from
VRF green. The workaround is to enable *udp_l3mdev_accept* sysctl, but
this breaks isolation between overlay and underlay: packets sent from
blue or red by e.g. a guest VM will be accepted by the socket, allowing
injection of VXLAN packets from the overlay.
This patch series fixes the issues describe above by allowing VXLAN socket to be
bound to a specific VRF device therefore looking up in the correct table.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexis Bauvin [Mon, 3 Dec 2018 09:54:41 +0000 (10:54 +0100)]
test/net: Add script for VXLAN underlay in a VRF
This script tests the support of a VXLAN underlay in a non-default VRF.
It does so by simulating two hypervisors and two VMs, an extended L2
between the VMs with the hypervisors as VTEPs with the underlay in a
VRF, and finally by pinging the two VMs.
It also tests that moving the underlay from a VRF to another works when
down/up the VXLAN interface.
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexis Bauvin [Mon, 3 Dec 2018 09:54:40 +0000 (10:54 +0100)]
vxlan: add support for underlay in non-default VRF
Creating a VXLAN device with is underlay in the non-default VRF makes
egress route lookup fail or incorrect since it will resolve in the
default VRF, and ingress fail because the socket listens in the default
VRF.
This patch binds the underlying UDP tunnel socket to the l3mdev of the
lower device of the VXLAN device. This will listen in the proper VRF and
output traffic from said l3mdev, matching l3mdev routing rules and
looking up the correct routing table.
When the VXLAN device does not have a lower device, or the lower device
is in the default VRF, the socket will not be bound to any interface,
keeping the previous behaviour.
The underlay l3mdev is deduced from the VXLAN lower device
(IFLA_VXLAN_LINK).
+----------+ +---------+
| | | |
| vrf-blue | | vrf-red |
| | | |
+----+-----+ +----+----+
| |
| |
+----+-----+ +----+----+
| | | |
| br-blue | | br-red |
| | | |
+----+-----+ +---+-+---+
| | |
| +-----+ +-----+
| | |
+----+-----+ +------+----+ +----+----+
| | lower device | | | |
| eth0 | <- - - - - - - | vxlan-red | | tap-red | (... more taps)
| | | | | |
+----------+ +-----------+ +---------+
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexis Bauvin [Mon, 3 Dec 2018 09:54:39 +0000 (10:54 +0100)]
l3mdev: add function to retreive upper master
Existing functions to retreive the l3mdev of a device did not walk the
master chain to find the upper master. This patch adds a function to
find the l3mdev, even indirect through e.g. a bridge:
+----------+
| |
| vrf-blue |
| |
+----+-----+
|
|
+----+-----+
| |
| br-blue |
| |
+----+-----+
|
|
+----+-----+
| |
| eth0 |
| |
+----------+
This will properly resolve the l3mdev of eth0 to vrf-blue.
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexis Bauvin [Mon, 3 Dec 2018 09:54:38 +0000 (10:54 +0100)]
udp_tunnel: add config option to bind to a device
UDP tunnel sockets are always opened unbound to a specific device. This
patch allow the socket to be bound on a custom device, which
incidentally makes UDP tunnels VRF-aware if binding to an l3mdev.
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 3 Dec 2018 21:55:44 +0000 (13:55 -0800)]
Merge branch 'mlxsw-fw_load_policy'
Ido Schimmel says:
====================
mlxsw: Add 'fw_load_policy' devlink parameter
Shalom says:
Currently, drivers do not have the ability to control the firmware
loading policy and they always use their own fixed policy. This prevents
drivers from running the device with a different firmware version for
testing and/or debugging purposes. For example, testing a firmware bug
fix.
For these situations, the new devlink generic parameter,
'fw_load_policy', gives the ability to control this option and allows
drivers to run with a different firmware version than required by the
driver.
Patch #1 adds the new parameter to devlink. The other two patches, #2
and #3, add support for this parameter in the mlxsw driver.
Example:
# Query the devlink parameters supported by the device
$ devlink dev param show
pci/0000:03:00.0:
name fw_load_policy type generic
values:
cmode driverinit value driver
# Flash new firmware using ethtool
$ ethtool -f swp1 mellanox/mlxsw_spectrum-13.1703.4.mfa2
# Toggle parameter
$ devlink dev param set pci/0000:03:00.0 name fw_load_policy value flash cmode driverinit
# devlink reset
$ devlink dev reload pci/0000:03:00.0
# Query firmware version to show changes took affect
$ ethtool -i swp1
driver: mlxsw_spectrum
version: 1.0
firmware-version: 13.1703.4
expansion-rom-version:
bus-info: 0000:03:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no
iproute2 patches available here:
https://github.com/tshalom/iproute2-next
v2:
* Change 'fw_version_check' to 'fw_load_policy' with values 'driver' and
'flash' (Jakub)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shalom Toledo [Mon, 3 Dec 2018 07:59:02 +0000 (07:59 +0000)]
mlxsw: spectrum: Load firmware version based on devlink parameter
Load firmware version based on 'fw_load_policy' devlink parameter. The
driver supports these two options:
* DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER (0)
Default, load firmware version preferred by the driver
* DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH (1)
Load firmware currently stored in flash
The second option, 'flash', allow the device to run with different firmware
version than preferred by the driver for testing and/or debugging purposes.
For example, testing a firmware bug fix.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shalom Toledo [Mon, 3 Dec 2018 07:59:01 +0000 (07:59 +0000)]
mlxsw: core: Reset firmware after flash during driver initialization
After flashing new firmware during the driver initialization flow (reload
or not), the driver should do a firmware reset when it gets -EAGAIN in
order to load the new one.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shalom Toledo [Mon, 3 Dec 2018 07:58:59 +0000 (07:58 +0000)]
devlink: Add 'fw_load_policy' generic parameter
Many drivers load the device's firmware image during the initialization
flow either from the flash or from the disk. Currently this option is not
controlled by the user and the driver decides from where to load the
firmware image.
'fw_load_policy' gives the ability to control this option which allows the
user to choose between different loading policies supported by the driver.
This parameter can be useful while testing and/or debugging the device. For
example, testing a firmware bug fix.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Mon, 3 Dec 2018 07:04:57 +0000 (08:04 +0100)]
net: phy: don't allow __set_phy_supported to add unsupported modes
Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Chancellor [Thu, 29 Nov 2018 06:01:05 +0000 (23:01 -0700)]
net: usb: aqc111: Initialize wol_cfg with memset in aqc111_suspend
Clang warns:
drivers/net/usb/aqc111.c:1326:37: warning: suggest braces around
initialization of subobject [-Wmissing-braces]
struct aqc111_wol_cfg wol_cfg = { 0 };
^
{}
1 warning generated.
Use memset to initialize the object to take compiler instrumentation out
of the equation.
Fixes:
e58ba4544c77 ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Thu, 29 Nov 2018 02:36:32 +0000 (02:36 +0000)]
net: qualcomm: rmnet: Remove set but not used variable 'cmd'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c: In function 'rmnet_map_do_flow_control':
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:23:36: warning:
variable 'cmd' set but not used [-Wunused-but-set-variable]
struct rmnet_map_control_command *cmd;
'cmd' not used anymore now, should also be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 28 Nov 2018 18:12:56 +0000 (19:12 +0100)]
tun: implement carrier change
The userspace may need to control the carrier state.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 28 Nov 2018 16:37:53 +0000 (17:37 +0100)]
net: reorder flowi_common fields to avoid holes
the flowi* structures are used and memsetted by server functions
in critical path. Currently flowi_common has a couple of holes that
we can eliminate reordering the struct fields. As a side effect,
both flowi4 and flowi6 shrink by 8 bytes.
Before:
pahole -EC flowi_common
struct flowi_common {
// ...
/* size: 40, cachelines: 1, members: 10 */
/* sum members: 32, holes: 1, sum holes: 4 */
/* padding: 4 */
/* last cacheline: 40 bytes */
};
pahole -EC flowi6
struct flowi6 {
// ...
/* size: 88, cachelines: 2, members: 6 */
/* padding: 4 */
/* last cacheline: 24 bytes */
};
pahole -EC flowi4
struct flowi4 {
// ...
/* size: 56, cachelines: 1, members: 4 */
/* padding: 4 */
/* last cacheline: 56 bytes */
};
After:
struct flowi_common {
// ...
/* size: 32, cachelines: 1, members: 10 */
/* last cacheline: 32 bytes */
};
struct flowi6 {
// ...
/* size: 80, cachelines: 2, members: 6 */
/* padding: 4 */
/* last cacheline: 16 bytes */
};
struct flowi4 {
// ...
/* size: 48, cachelines: 1, members: 4 */
/* padding: 4 */
/* last cacheline: 48 bytes */
};
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 1 Dec 2018 01:06:29 +0000 (17:06 -0800)]
Merge branch 'mlxsw-Add-VxLAN-support-with-VLAN-aware-bridges'
Ido Schimmel says:
====================
mlxsw: Add VxLAN support with VLAN-aware bridges
Commit
53e50a6ec24d ("Merge branch 'mlxsw-Add-VxLAN-support'") added
mlxsw support for VxLAN when the VxLAN device was enslaved to
VLAN-unaware bridges. This patchset extends mlxsw to also support VxLAN
with VLAN-aware bridges.
With VLAN-aware bridges, the VxLAN device's VNI is mapped to the VLAN
that is configured as 'pvid untagged' on the corresponding bridge port.
To prevent ambiguity, mlxsw forbids configurations in which the same
VLAN is configured as 'pvid untagged' on multiple VxLAN devices.
Patches #1-#2 add the necessary APIs in mlxsw and the bridge driver.
Patches #3-#4 perform small refactoring in order to prepare mlxsw for
VLAN-aware support.
Patch #5 finally enables the enslavement of VxLAN devices to a
VLAN-aware bridge. Among other things, it extends mlxsw to handle
switchdev notifications about VLAN add / delete on a VxLAN device
enslaved to an offloaded VLAN-aware bridge.
Patches #6-#8 add selftests to test the new functionality.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:08 +0000 (20:07 +0000)]
selftests: forwarding: Add VxLAN test with a VLAN-aware bridge
The test is very similar to its VLAN-unaware counterpart
(vxlan_bridge_1d.sh), but instead of using multiple VLAN-unaware
bridges, a single VLAN-aware bridge is used with multiple VLANs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:06 +0000 (20:07 +0000)]
selftests: mlxsw: Add a test for VxLAN configuration with a VLAN-aware bridge
Extend the existing VLAN-unaware tests with their VLAN-aware
counterparts. This includes sanitization of invalid configuration and
offload indication on the local route performing decapsulation and the
FDB entries perform encapsulation.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:05 +0000 (20:07 +0000)]
selftests: mlxsw: Consider VLAN-aware bridges as valid
Previous patches add the ability to work with VLAN-aware bridges and
VxLAN devices, so make sure such configuration no longer fails.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:04 +0000 (20:07 +0000)]
mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges
Commit
1c30d1836aeb ("mlxsw: spectrum: Enable VxLAN enslavement to
bridges") enabled the enslavement of VxLAN devices to bridges that have
mlxsw ports (or their upper) as slaves. This patch extends mlxsw to also
support VLAN-aware bridges.
The patch is similar in nature to mentioned commit, but there is one
major difference. With VLAN-aware bridges, the VxLAN device's VNI is
mapped to the VLAN that is configured as PVID and egress untagged on the
bridge port.
Therefore, the driver is extended to listen to VLAN configuration on
VxLAN devices of interest and enable / disable NVE encapsulation on the
corresponding 802.1Q FIDs.
To prevent ambiguity, the driver makes sure that a given VLAN is not
configured as PVID and egress untagged on multiple VxLAN devices. This
sanitization takes place both when a port is enslaved to a bridge with
existing VxLAN devices and when a VLAN is added to / removed from a
VxLAN device of interest.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:02 +0000 (20:07 +0000)]
mlxsw: spectrum_switchdev: Prepare function for VLAN-aware bridges
The vxlan_join() function resolves the FID on which the VNI should be
set and then sets the VNI. Currently, the FID is simply resolved
according to the ifindex of the bridge device to which the VxLAN device
is enslaved. This works because only VLAN-unaware bridges are supported.
With VLAN-aware bridges the FID would need to be resolved based on the
VLAN to which the VNI is mapped to.
Add the VLAN ID to the argument list of the function.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:01 +0000 (20:07 +0000)]
mlxsw: spectrum_switchdev: Unify VxLAN leave function
The function mlxsw_sp_bridge_vxlan_leave() is currently split between
VLAN-aware and VLAN-unaware bridges, but actually both types can use the
same function.
The function needs to resolve the FID that corresponds to the VxLAN
device and disable NVE encapsulation on it. Instead of looking up the
FID differently for VLAN-aware and VLAN-unaware bridges, we can always
use the VxLAN's device VNI.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:06:59 +0000 (20:06 +0000)]
mlxsw: spectrum_fid: Add API to lookup 802.1Q FIDs without creating them
In a similar fashion to commit
564c6d727aca ("mlxsw: spectrum_fid: Add
APIs to lookup FID without creating it"), add a corresponding API to
lookup 802.1Q FIDs.
This is a prerequisite to VxLAN support with VLAN-aware bridges and will
allow us to resolve a 802.1Q FID by its VLAN when an FDB entry is added
on the bridge port of the VxLAN device.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:06:58 +0000 (20:06 +0000)]
net: bridge: Extend br_vlan_get_pvid() for bridge ports
Currently, the function only works for the bridge device itself, but
subsequent patches will need to be able to query the PVID of a given
bridge port, so extend the function.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Nov 2018 21:45:13 +0000 (13:45 -0800)]
Merge branch 'qed-Doorbell-overflow-recovery'
Ariel Elior says:
====================
qed*: Doorbell overflow recovery
Doorbell Overflow
If sufficient CPU cores will send doorbells at a sufficiently high rate, they
can cause an overflow in the doorbell queue block message fifo. When fill level
reaches maximum, the device stops accepting all doorbells from that PF until a
recovery procedure has taken place.
Doorbell Overflow Recovery
The recovery procedure basically means resending the last doorbell for every
doorbelling entity. A doorbelling entity is anything which may send doorbells:
L2 tx ring, rdma sq/rq/cq, light l2, vf l2 tx ring, spq, etc. This relies on
the design assumption that all doorbells are aggregative, so last doorbell
carries the information of all previous doorbells.
APIs
All doorbelling entities need to register with the mechanism before sending
doorbells. The registration entails providing the doorbell address the entity
would be using, and a virtual address where last doorbell data can be found.
Typically fastpath structures already have this construct.
Executing the recovery procedure
Handling the attentions, iterating over all the registered entities and
resending their doorbells, is all handled within qed core module.
Relevance
All doorbelling entities in all protocols need to register with the mechanism,
via the new APIs. Technically this is quite simple (just call the API). Some
protocol fastpath implementation may not have the doorbell data stored anywhere
(compute it from scratch every time) and will have to add such a place.
This is rare and is also better practice (save some cycles on the fastpath).
Performance Penalty
No performance penalty should incur as a result of this feature. If anything
performance can improve by avoiding recalcualtion of doorbell data everytime
doorbell is sent (in some flows).
Add the database used to register doorbelling entities, and APIs for adding
and deleting entries, and logic for traversing the database and doorbelling
once on behalf of all entities.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:07 +0000 (18:16 +0200)]
qede: Register l2 queues with doorbell overflow recovery mechanism
All L2 queues funnel through this flow, so this would cover the
regular RSS queues, as well queues created for VFs, mqos queues,
xdp queues, etc.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:06 +0000 (18:16 +0200)]
qed: Expose the doorbell overflow recovery mechanism to the protocol drivers
Most of the doorbelling entities are outside of the core module.
L2 queues, Roce queues, iscsi and fcoe all need to register.
Make the APIs available for these drivers.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:05 +0000 (18:16 +0200)]
qed: Register light L2 queues with doorbell overflow recovery mechanism
Light L2 queues are doorbelling entities. Modify the implementation
to keep the doorbell data necessary for doorbelling in well known
location instead of recomputing every time. Register the LL2 queue
with doorbell recovery mechanism.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:04 +0000 (18:16 +0200)]
qed: Register slowpath queue doorbell with doorbell overflow recovery mechanism
Slow path queue is a doorbelling entity. Register it with the overflow mechanism.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:03 +0000 (18:16 +0200)]
qed: Use the doorbell overflow recovery mechanism in case of doorbell overflow
In case of an attention from the doorbell queue block, analyze the HW
indications. In case of a doorbell overflow, execute a doorbell recovery.
Since there can be spurious indications (race conditions between multiple PFs),
schedule a periodic task for checking whether a doorbell overflow may have been
missed. After a set time with no indications, terminate the periodic task.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:02 +0000 (18:16 +0200)]
qed: Add doorbell overflow recovery mechanism
Add the database used to register doorbelling entities, and APIs for adding
and deleting entries, and logic for traversing the database and doorbelling
once on behalf of all entities.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Nov 2018 21:33:35 +0000 (13:33 -0800)]
Merge branch 'rtnetlink-avoid-a-warning-in-rtnl_newlink'
Jakub Kicinski says:
====================
rtnetlink: avoid a warning in rtnl_newlink()
I've been hoping for some time that someone more competent would fix
the stack frame size warning in rtnl_newlink(), but looks like I'll
have to take a stab at it myself :) That's the only warning I see
in most of my builds.
First patch refactors away a somewhat surprising if (1) code block.
Reindentation will most likely cause cherry-pick problems but OTOH
rtnl_newlink() doesn't seem to be changed often, so perhaps we can
risk it in the name of cleaner code?
Second patch fixes the warning in simplest possible way. I was
pondering if there is any more clever solution, but I can't see it..
rtnl_newlink() is quite long with a lot of possible execution paths
so doing memory allocations half way through leads to very ugly
results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:32:31 +0000 (22:32 -0800)]
rtnetlink: avoid frame size warning in rtnl_newlink()
Standard kernel compilation produces the following warning:
net/core/rtnetlink.c: In function ‘rtnl_newlink’:
net/core/rtnetlink.c:3232:1: warning: the frame size of 1288 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
This should not really be an issue, as rtnl_newlink() stack is
generally quite shallow.
Fix the warning by allocating attributes with kmalloc() in a wrapper
and passing it down to rtnl_newlink(), avoiding complexities on error
paths.
Alternatively we could kmalloc() some structure within rtnl_newlink(),
slave attributes look like a good candidate. In practice it adds to
already rather high complexity and length of the function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:32:30 +0000 (22:32 -0800)]
rtnetlink: remove a level of indentation in rtnl_newlink()
rtnl_newlink() used to create VLAs based on link kind. Since
commit
ccf8dbcd062a ("rtnetlink: Remove VLA usage") statically
sized array is created on the stack, so there is no more use
for a separate code block that used to be the VLA's live range.
While at it christmas tree the variables. Note that there is
a goto-based retry so to be on the safe side the variables can
no longer be initialized in place. It doesn't seem to matter,
logically, but why make the code harder to read..
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Nov 2018 21:30:45 +0000 (13:30 -0800)]
Merge branch 'nfp-update-TX-path-to-enable-repr-offloads'
Jakub Kicinski says:
====================
nfp: update TX path to enable repr offloads
This set starts with three micro optimizations to the TX path.
The improvement is measurable, but below 1% of CPU utilization.
Patches 4 - 9 add basic TX offloads to representor devices, like
checksum offload or TSO, and remove the unnecessary TX lock and
Qdisc (our representors are software constructs on top of the PF).
The last 2 patches add more info to error messages - id of command
which failed and exact location of incorrect TLVs, very useful for
debugging.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:58 +0000 (22:24 -0800)]
nfp: report more info when reconfiguration fails
FW reconfiguration timeouts are a common indicator of FW trouble.
To make debugging easier print requested update and control word
when reconfiguration fails.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:57 +0000 (22:24 -0800)]
nfp: add offset to all TLV parsing errors
When troubleshooting incorrect FW capabilities it's useful to know
where the faulty TLV is located. Add offset to all errors messages.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:56 +0000 (22:24 -0800)]
nfp: add offloads on representors
FW/HW can generally support the standard networking offloads
on representors without any trouble. Add the ability for FW
to advertise which features should be available on representors.
Because representors are muxed on top of the vNIC we need to listen
on feature changes of their lower devices, and update their features
appropriately.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:55 +0000 (22:24 -0800)]
nfp: add locking around representor changes
Up until now we never needed to keep a networking locks around
representors accesses, we only accessed them when device was
reconfigured (under nfp pf->lock) or on fast path (under RCU).
Now we want to be able to iterate over all representors during
notifications, so make sure representor assignment is done
under RTNL lock.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:54 +0000 (22:24 -0800)]
nfp: run don't require Qdiscs on representor netdevs
Our representors are software devices built on top of the PF
vNIC, the queuing should only happen at the vNIC netdevice.
Allow representors to run qdisc-less.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:53 +0000 (22:24 -0800)]
nfp: run representor TX locklessly
Our representors are software devices built on top of the PF
vNIC, the only state they have are per-cpu stats, so make
the TX run locklessly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:52 +0000 (22:24 -0800)]
nfp: avoid oversized TSO headers with metadata prepend
In preparation for TSO over representors make sure the port id
prepend will always fit in the frame. The current max header
length is 255, which is ample, so assume worst case scenario
of 8 byte prepend and save ourselves the conditionals.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:51 +0000 (22:24 -0800)]
nfp: correct descriptor offsets in presence of metadata
The TSO-related offsets in the descriptor should not include
the length of the prepended metadata. Adjust them. Note that
this could not have caused issues in the past as we don't
support TSO with metadata prepend as of this patch.
Signed-off-by: Michael Rapson <michael.rapson@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:50 +0000 (22:24 -0800)]
nfp: move queue variable init
nd_q is only used at the very end of nfp_net_tx(), there is no need
to initialize it early.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:49 +0000 (22:24 -0800)]
nfp: move temporary variables in nfp_net_tx_complete()
Move temporary variables in scope of the loop in nfp_net_tx_complete(),
and add a temp for txbuf software structure. This saves us 0.2% of CPU.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:48 +0000 (22:24 -0800)]
nfp: copy only the relevant part of the TX descriptor for frags
Chained descriptors for fragments need to duplicate all the descriptor
fields of the skb head, so we copy the descriptor and then modify the
relevant fields. This is wasteful, because the top half of the descriptor
will get overwritten entirely while the bottom half is not modified at all.
Copy only the bottom half. This saves us 0.3% of CPU in a GSO test.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 23:03:21 +0000 (15:03 -0800)]
tcp: md5: add tcp_md5_needed jump label
Most linux hosts never setup TCP MD5 keys. We can avoid a
cache line miss (accessing tp->md5ig_info) on RX and TX
using a jump label.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Nov 2018 21:26:54 +0000 (13:26 -0800)]
Merge branch 'tcp-take-a-bit-more-care-of-backlog-stress'
Eric Dumazet says:
====================
tcp: take a bit more care of backlog stress
While working on the SACK compression issue Jean-Louis Dupond
reported, we found that his linux box was suffering very hard
from tail drops on the socket backlog queue.
First patch hints the compiler about sack flows being the norm.
Second patch changes non-sack code in preparation of the ack
compression.
Third patch fixes tcp_space() to take backlog into account.
Fourth patch is attempting coalescing when a new packet must
be added to the backlog queue. Cooking bigger skbs helps
to keep backlog list smaller and speeds its handling when
user thread finally releases the socket lock.
v3: Neal/Yuchung feedback addressed :
Do not aggregate if any skb has URG bit set.
Do not aggregate if the skbs have different ECE/CWR bits
v2: added feedback from Neal : tcp: take care of compressed acks in tcp_add_reno_sack()
added : tcp: hint compiler about sack flows
added : tcp: make tcp_space() aware of socket backlog
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:03 +0000 (14:42 -0800)]
tcp: implement coalescing on backlog queue
In case GRO is not as efficient as it should be or disabled,
we might have a user thread trapped in __release_sock() while
softirq handler flood packets up to the point we have to drop.
This patch balances work done from user thread and softirq,
to give more chances to __release_sock() to complete its work
before new packets are added the the backlog.
This also helps if we receive many ACK packets, since GRO
does not aggregate them.
This patch brings ~60% throughput increase on a receiver
without GRO, but the spectacular gain is really on
1000x release_sock() latency reduction I have measured.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:02 +0000 (14:42 -0800)]
tcp: make tcp_space() aware of socket backlog
Jean-Louis Dupond reported poor iscsi TCP receive performance
that we tracked to backlog drops.
Apparently we fail to send window updates reflecting the
fact that we are under stress.
Note that we might lack a proper window increase when
backlog is fully processed, since __release_sock() clears
sk->sk_backlog.len _after_ all skbs have been processed.
This should not matter in practice. If we had a significant
load through socket backlog, we are in a dangerous
situation.
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Tested-by: Jean-Louis Dupond<jean-louis@dupond.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:01 +0000 (14:42 -0800)]
tcp: take care of compressed acks in tcp_add_reno_sack()
Neal pointed out that non sack flows might suffer from ACK compression
added in the following patch ("tcp: implement coalescing on backlog queue")
Instead of tweaking tcp_add_backlog() we can take into
account how many ACK were coalesced, this information
will be available in skb_shinfo(skb)->gso_segs
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:00 +0000 (14:42 -0800)]
tcp: hint compiler about sack flows
Tell the compiler that most TCP flows are using SACK these days.
There is no need to add the unlikely() clause in tcp_is_reno(),
the compiler is able to infer it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geneviève Bastien [Tue, 27 Nov 2018 17:52:39 +0000 (12:52 -0500)]
net: Add trace events for all receive exit points
Trace events are already present for the receive entry points, to indicate
how the reception entered the stack.
This patch adds the corresponding exit trace events that will bound the
reception such that all events occurring between the entry and the exit
can be considered as part of the reception context. This greatly helps
for dependency and root cause analyses.
Without this, it is not possible with tracepoint instrumentation to
determine whether a sched_wakeup event following a netif_receive_skb
event is the result of the packet reception or a simple coincidence after
further processing by the thread. It is possible using other mechanisms
like kretprobes, but considering the "entry" points are already present,
it would be good to add the matching exit events.
In addition to linking packets with wakeups, the entry/exit event pair
can also be used to perform network stack latency analyses.
Signed-off-by: Geneviève Bastien <gbastien@versatic.net>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: David S. Miller <davem@davemloft.net>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> (tracing side)
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Tue, 27 Nov 2018 15:40:59 +0000 (15:40 +0000)]
net/flow_dissector: correct comments on enum flow_dissector_key_id
There are no such structs flow_dissector_key_flow_vlan or
flow_dissector_key_flow_tags, the actual structs used are struct
flow_dissector_key_vlan and struct flow_dissector_key_tags. So correct the
comments against FLOW_DISSECTOR_KEY_VLAN, FLOW_DISSECTOR_KEY_FLOW_LABEL and
FLOW_DISSECTOR_KEY_CVLAN to refer to those.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Tue, 27 Nov 2018 09:29:06 +0000 (14:59 +0530)]
cxgb4: number of VFs supported is not always 16
Total number of VFs supported by PF is used to determine the last
byte of VF's mac address. Number of VFs supported is not always
16, use the variable nvfs to get the number of VFs supported
rather than hard coding it to 16.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Nov 2018 02:15:07 +0000 (18:15 -0800)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2018-11-30
The following pull-request contains BPF updates for your *net-next* tree.
(Getting out bit earlier this time to pull in a dependency from bpf.)
The main changes are:
1) Add libbpf ABI versioning and document API naming conventions
as well as ABI versioning process, from Andrey.
2) Add a new sk_msg_pop_data() helper for sk_msg based BPF
programs that is used in conjunction with sk_msg_push_data()
for adding / removing meta data to the msg data, from John.
3) Optimize convert_bpf_ld_abs() for 0 offset and fix various
lib and testsuite build failures on 32 bit, from David.
4) Make BPF prog dump for !JIT identical to how we dump subprogs
when JIT is in use, from Yonghong.
5) Rename btf_get_from_id() to make it more conform with libbpf
API naming conventions, from Martin.
6) Add a missing BPF kselftest config item, from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Thu, 29 Nov 2018 23:31:45 +0000 (15:31 -0800)]
tools/bpf: make libbpf _GNU_SOURCE friendly
During porting libbpf to bcc, I got some warnings like below:
...
[ 2%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf.c:12:0:
warning: "_GNU_SOURCE" redefined [enabled by default]
#define _GNU_SOURCE
...
[ 3%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf_errno.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c: In function ‘libbpf_strerror’:
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c:45:7:
warning: assignment makes integer from pointer without a cast [enabled by default]
ret = strerror_r(err, buf, size);
...
bcc is built with _GNU_SOURCE defined and this caused the above warning.
This patch intends to make libpf _GNU_SOURCE friendly by
. define _GNU_SOURCE in libbpf.c unless it is not defined
. undefine _GNU_SOURCE as non-gnu version of strerror_r is expected.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Fri, 30 Nov 2018 00:01:34 +0000 (16:01 -0800)]
net: Don't default Aquantia USB driver to 'y'
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Mon, 26 Nov 2018 17:31:26 +0000 (09:31 -0800)]
net: explain __skb_checksum_complete() with comments
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 29 Nov 2018 15:56:20 +0000 (07:56 -0800)]
tcp: remove loop to compute wscale
We can remove the loop and conditional branches
and compute wscale efficiently thanks to ilog2()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Shteinbok [Thu, 29 Nov 2018 08:50:19 +0000 (10:50 +0200)]
qede - Add a statistic for a case where driver drops tx packet due to memory allocation failure.
skb_linearization can fail due to memory allocation failure.
In such a case, the driver will drop the packet. In such a case
The driver used to print an error message.
This patch replaces this error message by a dedicated statistic.
Signed-off-by: Michael Shteinbok <michael.shteinbok@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Thu, 29 Nov 2018 08:43:40 +0000 (08:43 +0000)]
dpaa2-eth: Add "fall through" comments
Add comments in the switch statement for XDP action to indicate
fallthrough is intended.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Nov 2018 18:34:46 +0000 (10:34 -0800)]
Merge branch 'ave-suspend-resume'
Kunihiko Hayashi says:
====================
Add suspend/resume support for AVE ethernet driver
This series adds support for suspend/resume to AVE ethernet driver.
And to avoid the error that wol state of phy hardware is enabled by default,
this sets initial wol state to disabled and add preservation the state in
suspend/resume sequence.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 29 Nov 2018 08:06:33 +0000 (17:06 +0900)]
net: ethernet: ave: Preserve wol state in suspend/resume sequence
Since the wol state forces to be initialized after reset, the state should
be preserved in suspend/resume sequence.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 29 Nov 2018 08:06:32 +0000 (17:06 +0900)]
net: ethernet: ave: Set initial wol state to disabled
If wol state of phy hardware is enabled after reset, phy_ethtool_get_wol()
returns that wol.wolopts is true.
However, since net_device.wol_enabled is zero and this doesn't apply wol
state until calling ethtool_set_wol(), so mdio_bus_phy_may_suspend()
returns true, that is, it's in a state where phy can suspend even though
wol state is enabled.
In this inconsistency, phy_suspend() returns -EBUSY, and at last,
suspend sequence fails with the following message:
dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x58 returns -16
PM: Device
65000000.ethernet-
ffffffff:01 failed to suspend: error -16
PM: Some devices failed to suspend, or early wake event detected
In order to fix the above issue, this patch forces to set initial wol state
to disabled as default.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 29 Nov 2018 08:06:31 +0000 (17:06 +0900)]
net: ethernet: ave: Add suspend/resume support
This patch introduces suspend and resume functions to ave driver.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Nov 2018 07:18:16 +0000 (23:18 -0800)]
Merge tag 'linux-can-next-for-4.21-
20181128' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
This is a pull request for net-next/master consisting of 18 patches.
The first patch is by Colin Ian King and fixes the spelling in the ucan
driver.
The next three patches target the xilinx driver. YueHaibing's patch
fixes the return type of ndo_start_xmit function. Two patches by
Shubhrajyoti Datta add support for the CAN FD 2.0 controllers.
Flavio Suligoi's patch for the sja1000 driver add support for the ASEM
CAN raw hardware.
Wolfram Sang's and Kuninori Morimoto's patches switch the rcar driver to
use SPDX license identifiers.
The remaining 111 patches improve the flexcan driver. Pankaj Bansal's
patch enables the driver in Kconfig on all architectures with IOMEM
support. The next four patches by me fix indention, add missing
parentheses and comments. Aisheng Dong's patches add self wake support
and document it in the DT bindings. The remaining patches by Pankaj
Bansal first fix the loopback support and prepare the driver for the
CAN-FD support needed for the LX2160A SoC. The actual CAN-FD support
will be added in a later patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Nov 2018 06:10:54 +0000 (22:10 -0800)]
Merge git://git./linux/kernel/git/davem/net
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Wed, 28 Nov 2018 20:56:10 +0000 (12:56 -0800)]
bpf: Fix various lib and testsuite build failures on 32-bit.
Cannot cast a u64 to a pointer on 32-bit without an intervening (long)
cast otherwise GCC warns.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Naresh Kamboju [Tue, 27 Nov 2018 15:24:44 +0000 (20:54 +0530)]
selftests/bpf: add config fragment CONFIG_FTRACE_SYSCALLS
CONFIG_FTRACE_SYSCALLS=y is required for get_cgroup_id_user test case
this test reads a file from debug trace path
/sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann [Wed, 28 Nov 2018 21:07:57 +0000 (22:07 +0100)]
Merge branch 'bpf-sk-msg-pop-data'
John Fastabend says:
====================
After being able to add metadata to messages with sk_msg_push_data we
have also found it useful to be able to "pop" this metadata off before
sending it to applications in some cases. This series adds a new helper
sk_msg_pop_data() and the associated patches to add tests and tools/lib
support.
Thanks!
v2: Daniel caught that we missed adding sk_msg_pop_data to the changes
data helper so that the verifier ensures BPF programs revalidate
data after using this helper. Also improve documentation adding a
return description and using RST syntax per Quentin's comment. And
delta calculations for DROP with pop'd data (albeit a strange set
of operations for a program to be doing) had potential to be
incorrect possibly confusing user space applications, so fix it.
====================
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
John Fastabend [Mon, 26 Nov 2018 22:16:19 +0000 (14:16 -0800)]
bpf: test_sockmap, add options for msg_pop_data() helper
Similar to msg_pull_data and msg_push_data add a set of options to
have msg_pop_data() exercised.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
John Fastabend [Mon, 26 Nov 2018 22:16:18 +0000 (14:16 -0800)]
bpf: add msg_pop_data helper to tools
Add the necessary header definitions to tools for new
msg_pop_data_helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
John Fastabend [Mon, 26 Nov 2018 22:16:17 +0000 (14:16 -0800)]
bpf: helper to pop data from messages
This adds a BPF SK_MSG program helper so that we can pop data from a
msg. We use this to pop metadata from a previous push data call.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linus Torvalds [Wed, 28 Nov 2018 20:53:48 +0000 (12:53 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) ARM64 JIT fixes for subprog handling from Daniel Borkmann.
2) Various sparc64 JIT bug fixes (fused branch convergance, frame
pointer usage detection logic, PSEODU call argument handling).
3) Fix to use BH locking in nf_conncount, from Taehee Yoo.
4) Fix race of TX skb freeing in ipheth driver, from Bernd Eckstein.
5) Handle return value of TX NAPI completion properly in lan743x
driver, from Bryan Whitehead.
6) MAC filter deletion in i40e driver clears wrong state bit, from
Lihong Yang.
7) Fix use after free in rionet driver, from Pan Bian.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
s390/qeth: fix length check in SNMP processing
net: hisilicon: remove unexpected free_netdev
rapidio/rionet: do not free skb before reading its length
i40e: fix kerneldoc for xsk methods
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
i40e: Fix deletion of MAC filters
igb: fix uninitialized variables
netfilter: nf_tables: deactivate expressions in rule replecement routine
lan743x: Enable driver to work with LAN7431
tipc: fix lockdep warning during node delete
lan743x: fix return value for lan743x_tx_napi_poll
net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"
qed: fix spelling mistake "attnetion" -> "attention"
net: thunderx: fix NULL pointer dereference in nic_remove
sctp: increase sk_wmem_alloc when head->truesize is increased
firestream: fix spelling mistake: "Inititing" -> "Initializing"
net: phy: add workaround for issue where PHY driver doesn't bind to the device
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
sparc: Adjust bpf JIT prologue for PSEUDO calls.
bpf, doc: add entries of who looks over which jits
...
Linus Torvalds [Wed, 28 Nov 2018 20:51:10 +0000 (12:51 -0800)]
Merge tag 'xtensa-
20181128' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix kernel exception on userspace access to a currently disabled
coprocessor
- fix coprocessor data saving/restoring in configurations with multiple
coprocessors
- fix ptrace access to coprocessor data on configurations with multiple
coprocessors with high alignment requirements
* tag 'xtensa-
20181128' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix coprocessor part of ptrace_{get,set}xregs
xtensa: fix coprocessor context offset definitions
xtensa: enable coprocessors that are being flushed
David S. Miller [Wed, 28 Nov 2018 19:33:35 +0000 (11:33 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2018-11-28
This series contains fixes to igb, ixgbe and i40e.
Yunjian Wang from Huawei resolves a variable that could potentially be
NULL before it is used.
Lihong fixes an i40e issue which goes back to 4.17 kernels, where
deleting any of the MAC filters was causing the incorrect syncing for
the PF.
Josh Elsasser caught that there were missing enum values in the link
capabilities for x550 devices, which was preventing link for 1000BaseLX
SFP modules.
Jan fixes the function header comments for XSK methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 28 Nov 2018 15:20:50 +0000 (16:20 +0100)]
s390/qeth: fix length check in SNMP processing
The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.
Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 28 Nov 2018 12:31:42 +0000 (20:31 +0800)]
net: qualcomm: rmnet: remove set but not used variables 'ip_family, fc_seq, qos_id'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:26:6:
warning: variable 'ip_family' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:27:6:
warning: variable 'fc_seq' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:28:6:
warning: variable 'qos_id' set but not used [-Wunused-but-set-variable]
It never used since introduction in commit
ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 28 Nov 2018 12:29:39 +0000 (20:29 +0800)]
qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4011:5:
warning: variable 'max_hw_rings' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4013:6:
warning: variable 'cur_rings' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2996:25:
warning: variable 'tx_desc_info' set but not used [-Wunused-but-set-variable]
'cur_rings, max_hw_rings' never used since introduction in commit
34e8c406fda5 ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.")
'tx_desc_info' never used since commit
95b3890ae39f ("qlcnic: Enhance Tx timeout debugging.")
Also 'queue_type' only can be QLCNIC_RX_QUEUE/QLCNIC_TX_QUEUE,
so make a trival cleanup on if statement.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 28 Nov 2018 12:24:41 +0000 (20:24 +0800)]
net: neterion: vxge: remove set but not used variables 'max_frags' and 'txdl_priv'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/neterion/vxge/vxge-traffic.c:1698:35:
warning: variable 'txdl_priv' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-traffic.c:1699:6:
warning: variable 'max_frags' set but not used [-Wunused-but-set-variable]
It never used since introduction in
commit
113241321dcd ("Neterion: New driver: Traffic & alarm handler")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 28 Nov 2018 19:02:45 +0000 (11:02 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Disable BH while holding list spinlock in nf_conncount, from
Taehee Yoo.
2) List corruption in nf_conncount, also from Taehee.
3) Fix race that results in leaving around an empty list node in
nf_conncount, from Taehee Yoo.
4) Proper chain handling for inactive chains from the commit path,
from Florian Westphal. This includes a selftest for this.
5) Do duplicate rule handles when replacing rules, also from Florian.
6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.
7) Possible use-after-free in nft_compat when releasing extensions.
From Florian.
8) Memory leak in xt_hashlimit, from Taehee.
9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.
10) Fix cttimeout with udplite and gre, from Florian.
11) Preserve oif for IPv6 link-local generated traffic from mangle
table, from Alin Nastac.
12) Missing error handling in masquerade notifiers, from Taehee Yoo.
13) Use mutex to protect registration/unregistration of masquerade
extensions in order to prevent a race, from Taehee.
14) Incorrect condition check in tree_nodes_free(), also from Taehee.
15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 28 Nov 2018 18:57:46 +0000 (10:57 -0800)]
Merge branch 'dpaa2-eth-Introduce-XDP-support'
Ioana Ciocoi Radulescu says:
====================
dpaa2-eth: Introduce XDP support
Add support for XDP programs. Only XDP_PASS, XDP_DROP and XDP_TX
actions are supported for now. Frame header changes are also
allowed.
v2: - count the XDP packets in the rx/tx inteface stats
- add message with the maximum supported MTU value for XDP
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:34 +0000 (16:27 +0000)]
dpaa2-eth: Add xdp counters
Add counters for xdp processed frames to the channel statistics.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:33 +0000 (16:27 +0000)]
dpaa2-eth: Cleanup channel stats
Remove unused counter. Reorder fields in channel stats structure
to match the ethtool strings order and make it easier to print them
with ethtool -S.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:33 +0000 (16:27 +0000)]
dpaa2-eth: Add support for XDP_TX
Send frames back on the same port for XDP_TX action.
Since the frame buffers have been allocated by us, we can recycle
them directly into the Rx buffer pool instead of requesting a
confirmation frame upon transmission complete.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:32 +0000 (16:27 +0000)]
dpaa2-eth: Map Rx buffers as bidirectional
In order to support enqueueing Rx FDs back to hardware, we need to
DMA map Rx buffers as bidirectional.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:31 +0000 (16:27 +0000)]
dpaa2-eth: Release buffers back to pool on XDP_DROP
Instead of freeing the RX buffers, release them back into the pool.
We wait for the maximum number of buffers supported by a single
release command to accumulate before issuing the command.
Also, don't unmap the Rx buffers at the beginning of the Rx routine
anymore, since that would require remapping them before release.
Instead, just do a DMA sync at first and only unmap if the frame is
meant for the stack.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:31 +0000 (16:27 +0000)]
dpaa2-eth: Move function
We'll use function free_bufs() on the XDP path as well, so move
it higher in order to avoid a forward declaration.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:30 +0000 (16:27 +0000)]
dpaa2-eth: Allow XDP header adjustments
Reserve XDP_PACKET_HEADROOM bytes in Rx buffers to allow XDP
programs to increase frame header size.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciocoi Radulescu [Mon, 26 Nov 2018 16:27:29 +0000 (16:27 +0000)]
dpaa2-eth: Add basic XDP support
We keep one XDP program reference per channel. The only actions
supported for now are XDP_DROP and XDP_PASS.
Until now we didn't enforce a maximum size for Rx frames based
on MTU value. Change that, since for XDP mode we must ensure no
scatter-gather frames can be received.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Wed, 28 Nov 2018 07:30:24 +0000 (15:30 +0800)]
net: hisilicon: remove unexpected free_netdev
The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Wed, 28 Nov 2018 06:53:19 +0000 (14:53 +0800)]
rapidio/rionet: do not free skb before reading its length
skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.
Fixes:
e6161d64263 ("rapidio/rionet: rework driver initialization and removal")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Sokolowski [Tue, 27 Nov 2018 17:35:35 +0000 (09:35 -0800)]
i40e: fix kerneldoc for xsk methods
One method, xsk_umem_setup, had an incorrect kernel doc
description, which has been corrected.
Also fixes small typos found in the comments.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>