Dmitry V. Levin [Tue, 7 Mar 2017 20:50:50 +0000 (23:50 +0300)]
uapi: fix linux/packet_diag.h userspace compilation error
[ Upstream commit
745cb7f8a5de0805cade3de3991b7a95317c7c73 ]
Replace MAX_ADDR_LEN with its numeric value to fix the following
linux/packet_diag.h userspace compilation error:
/usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function)
__u8 pdmc_addr[MAX_ADDR_LEN];
This is not the first case in the UAPI where the numeric value
of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h
already does the same:
$ grep MAX_ADDR_LEN include/uapi/linux/if_link.h
__u8 mac[32]; /* MAX_ADDR_LEN */
There are no UAPI headers besides these two that use MAX_ADDR_LEN.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 7 Mar 2017 17:33:31 +0000 (18:33 +0100)]
net/tunnel: set inner protocol in network gro hooks
[ Upstream commit
294acf1c01bace5cea5d30b510504238bf5f7c25 ]
The gso code of several tunnels type (gre and udp tunnels)
takes for granted that the skb->inner_protocol is properly
initialized and drops the packet elsewhere.
On the forwarding path no one is initializing such field,
so gro encapsulated packets are dropped on forward.
Since commit
38720352412a ("gre: Use inner_proto to obtain
inner header protocol"), this can be reproduced when the
encapsulated packets use gre as the tunneling protocol.
The issue happens also with vxlan and geneve tunnels since
commit
8bce6d7d0d1e ("udp: Generalize skb_udp_segment"), if the
forwarding host's ingress nic has h/w offload for such tunnel
and a vxlan/geneve device is configured on top of it, regardless
of the configured peer address and vni.
To address the issue, this change initialize the inner_protocol
field for encapsulated packets in both ipv4 and ipv6 gro complete
callbacks.
Fixes:
38720352412a ("gre: Use inner_proto to obtain inner header protocol")
Fixes:
8bce6d7d0d1e ("udp: Generalize skb_udp_segment")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Mon, 6 Mar 2017 16:53:04 +0000 (08:53 -0800)]
vrf: Fix use-after-free in vrf_xmit
[ Upstream commit
f7887d40e541f74402df0684a1463c0a0bb68c68 ]
KASAN detected a use-after-free:
[ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr
ffff8800350a21c0
[ 269.467067] Read of size 4 by task ssh/1879
[ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249
[ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 269.467067] Call Trace:
[ 269.467067] dump_stack+0x81/0xb6
[ 269.467067] kasan_object_err+0x21/0x78
[ 269.467067] kasan_report+0x2f7/0x450
[ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf]
[ 269.467067] ? ip_output+0xa4/0xdb
[ 269.467067] __asan_load4+0x6b/0x6d
[ 269.467067] vrf_xmit+0x7f1/0x827 [vrf]
...
Which corresponds to the skb access after xmit handling. Fix by saving
skb->len and using the saved value to update stats.
Fixes:
193125dbd8eb2 ("net: Introduce VRF device driver")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sun, 5 Mar 2017 18:52:16 +0000 (10:52 -0800)]
dccp: fix use-after-free in dccp_feat_activate_values
[ Upstream commit
62f8f4d9066c1c6f2474845d1ca7e2891f2ae3fd ]
Dmitry reported crashes in DCCP stack [1]
Problem here is that when I got rid of listener spinlock, I missed the
fact that DCCP stores a complex state in struct dccp_request_sock,
while TCP does not.
Since multiple cpus could access it at the same time, we need to add
protection.
[1]
BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0
net/dccp/feat.c:1541 at addr
ffff88003713be68
Read of size 8 by task syz-executor2/8457
CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x292/0x398 lib/dump_stack.c:51
kasan_object_err+0x1c/0x70 mm/kasan/report.c:162
print_address_description mm/kasan/report.c:200 [inline]
kasan_report_error mm/kasan/report.c:289 [inline]
kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311
kasan_report mm/kasan/report.c:332 [inline]
__asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332
dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541
dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
NF_HOOK include/linux/netfilter.h:257 [inline]
ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
dst_input include/net/dst.h:507 [inline]
ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:257 [inline]
ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
__netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
__netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
process_backlog+0xe5/0x6c0 net/core/dev.c:4839
napi_poll net/core/dev.c:5202 [inline]
net_rx_action+0xe70/0x1900 net/core/dev.c:5267
__do_softirq+0x2fb/0xb7d kernel/softirq.c:284
do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
</IRQ>
do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
do_softirq kernel/softirq.c:176 [inline]
__local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181
local_bh_enable include/linux/bottom_half.h:31 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline]
ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123
ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148
NF_HOOK_COND include/linux/netfilter.h:246 [inline]
ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162
ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501
inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179
dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141
dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280
dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362
dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
sock_sendmsg_nosec net/socket.c:635 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:645
SYSC_sendto+0x660/0x810 net/socket.c:1687
SyS_sendto+0x40/0x50 net/socket.c:1655
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x4458b9
RSP: 002b:
00007f8ceb77bb58 EFLAGS:
00000282 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
0000000000000017 RCX:
00000000004458b9
RDX:
0000000000000023 RSI:
0000000020e60000 RDI:
0000000000000017
RBP:
00000000006e1b90 R08:
00000000200f9fe1 R09:
0000000000000020
R10:
0000000000008010 R11:
0000000000000282 R12:
00000000007080a8
R13:
0000000000000000 R14:
00007f8ceb77c9c0 R15:
00007f8ceb77c700
Object at
ffff88003713be50, in cache kmalloc-64 size: 64
Allocated:
PID = 8446
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738
kmalloc include/linux/slab.h:490 [inline]
dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467
dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487
__feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741
dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949
dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012
dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423
dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217
dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377
dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606
dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632
sk_backlog_rcv include/net/sock.h:893 [inline]
__sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479
dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742
ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
NF_HOOK include/linux/netfilter.h:257 [inline]
ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
dst_input include/net/dst.h:507 [inline]
ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:257 [inline]
ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
__netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
__netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
process_backlog+0xe5/0x6c0 net/core/dev.c:4839
napi_poll net/core/dev.c:5202 [inline]
net_rx_action+0xe70/0x1900 net/core/dev.c:5267
__do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Freed:
PID = 15
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514 [inline]
kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
slab_free_hook mm/slub.c:1355 [inline]
slab_free_freelist_hook mm/slub.c:1377 [inline]
slab_free mm/slub.c:2954 [inline]
kfree+0xe8/0x2b0 mm/slub.c:3874
dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418
dccp_feat_entry_destructor net/dccp/feat.c:416 [inline]
dccp_feat_list_pop net/dccp/feat.c:541 [inline]
dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543
dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
NF_HOOK include/linux/netfilter.h:257 [inline]
ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
dst_input include/net/dst.h:507 [inline]
ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:257 [inline]
ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
__netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
__netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
process_backlog+0xe5/0x6c0 net/core/dev.c:4839
napi_poll net/core/dev.c:5202 [inline]
net_rx_action+0xe70/0x1900 net/core/dev.c:5267
__do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Memory state around the buggy address:
ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb
^
Fixes:
079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Sun, 5 Mar 2017 00:01:55 +0000 (03:01 +0300)]
net/sched: act_skbmod: remove unneeded rcu_read_unlock in tcf_skbmod_dump
[ Upstream commit
6c4dc75c251721f517e9daeb5370ea606b5b35ce ]
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 4 Mar 2017 05:01:03 +0000 (21:01 -0800)]
net: fix socket refcounting in skb_complete_tx_timestamp()
[ Upstream commit
9ac25fc063751379cb77434fef9f3b088cd3e2f7 ]
TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.
sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc and lead to leaks or use after free.
Fixes:
62bccb8cdb69 ("net-timestamp: Make the clone operation stand-alone from phy timestamping")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 4 Mar 2017 05:01:02 +0000 (21:01 -0800)]
net: fix socket refcounting in skb_complete_wifi_ack()
[ Upstream commit
dd4f10722aeb10f4f582948839f066bebe44e5fb ]
TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.
sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc.
Fixes:
bf7fa551e0ce ("mac80211: Resolve sk_refcnt/sk_wmem_alloc issue in wifi ack path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 3 Mar 2017 22:08:21 +0000 (14:08 -0800)]
tcp: fix various issues for sockets morphing to listen state
[ Upstream commit
02b2faaf0af1d85585f6d6980e286d53612acfc2 ]
Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting
tcp_disconnect() path that was never really considered and/or used
before syzkaller ;)
I was not able to reproduce the bug, but it seems issues here are the
three possible actions that assumed they would never trigger on a
listener.
1) tcp_write_timer_handler
2) tcp_delack_timer_handler
3) MTU reduction
Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN
states from tcp_v6_mtu_reduced()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WANG Cong [Fri, 3 Mar 2017 20:21:14 +0000 (12:21 -0800)]
strparser: destroy workqueue on module exit
[ Upstream commit
f78ef7cd9a0686b979679d0de061c6dbfd8d649e ]
Fixes:
43a0c6751a32 ("strparser: Stream parser for messages")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Wed, 1 Mar 2017 19:35:07 +0000 (16:35 -0300)]
dccp: Unlock sock before calling sk_free()
[ Upstream commit
d5afb6f9b6bb2c57bd0c05e76e12489dc0d037d9 ]
The code where sk_clone() came from created a new socket and locked it,
but then, on the error path didn't unlock it.
This problem stayed there for a long while, till
b0691c8ee7c2 ("net:
Unlock sock before calling sk_free()") fixed it, but unfortunately the
callers of sk_clone() (now sk_clone_locked()) were not audited and the
one in dccp_create_openreq_child() remained.
Now in the age of the syskaller fuzzer, this was finally uncovered, as
reported by Dmitry:
---- 8< ----
I've got the following report while running syzkaller fuzzer on
86292b33d4b7 ("Merge branch 'akpm' (patches from Andrew)")
[ BUG: held lock freed! ]
4.10.0+ #234 Not tainted
-------------------------
syz-executor6/6898 is freeing memory
ffff88006286cac0-
ffff88006286d3b7, with a lock still held there!
(slock-AF_INET6){+.-...}, at: [<
ffffffff8362c2c9>] spin_lock
include/linux/spinlock.h:299 [inline]
(slock-AF_INET6){+.-...}, at: [<
ffffffff8362c2c9>]
sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504
5 locks held by syz-executor6/6898:
#0: (sk_lock-AF_INET6){+.+.+.}, at: [<
ffffffff839a34b4>] lock_sock
include/net/sock.h:1460 [inline]
#0: (sk_lock-AF_INET6){+.+.+.}, at: [<
ffffffff839a34b4>]
inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681
#1: (rcu_read_lock){......}, at: [<
ffffffff83bc1c2a>]
inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126
#2: (rcu_read_lock){......}, at: [<
ffffffff8369b424>] __skb_unlink
include/linux/skbuff.h:1767 [inline]
#2: (rcu_read_lock){......}, at: [<
ffffffff8369b424>] __skb_dequeue
include/linux/skbuff.h:1783 [inline]
#2: (rcu_read_lock){......}, at: [<
ffffffff8369b424>]
process_backlog+0x264/0x730 net/core/dev.c:4835
#3: (rcu_read_lock){......}, at: [<
ffffffff83aeb5c0>]
ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59
#4: (slock-AF_INET6){+.-...}, at: [<
ffffffff8362c2c9>] spin_lock
include/linux/spinlock.h:299 [inline]
#4: (slock-AF_INET6){+.-...}, at: [<
ffffffff8362c2c9>]
sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504
Fix it just like was done by
b0691c8ee7c2 ("net: Unlock sock before calling
sk_free()").
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170301153510.GE15145@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 1 Mar 2017 22:45:06 +0000 (14:45 -0800)]
ipv6: orphan skbs in reassembly unit
[ Upstream commit
48cac18ecf1de82f76259a54402c3adb7839ad01 ]
Andrey reported a use-after-free in IPv6 stack.
Issue here is that we free the socket while it still has skb
in TX path and in some queues.
It happens here because IPv6 reassembly unit messes skb->truesize,
breaking skb_set_owner_w() badly.
We fixed a similar issue for IPV4 in commit
8282f27449bf ("inet: frag:
Always orphan skbs inside ip_defrag()")
Acked-by: Joe Stringer <joe@ovn.org>
==================================================================
BUG: KASAN: use-after-free in sock_wfree+0x118/0x120
Read of size 8 at addr
ffff880062da0060 by task a.out/4140
page:
ffffea00018b6800 count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw:
0100000000008100 0000000000000000 0000000000000000 0000000180130013
raw:
dead000000000100 dead000000000200 ffff88006741f140 0000000000000000
page dumped because: kasan: bad access detected
CPU: 0 PID: 4140 Comm: a.out Not tainted 4.10.0-rc3+ #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15
dump_stack+0x292/0x398 lib/dump_stack.c:51
describe_address mm/kasan/report.c:262
kasan_report_error+0x121/0x560 mm/kasan/report.c:370
kasan_report mm/kasan/report.c:392
__asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:413
sock_flag ./arch/x86/include/asm/bitops.h:324
sock_wfree+0x118/0x120 net/core/sock.c:1631
skb_release_head_state+0xfc/0x250 net/core/skbuff.c:655
skb_release_all+0x15/0x60 net/core/skbuff.c:668
__kfree_skb+0x15/0x20 net/core/skbuff.c:684
kfree_skb+0x16e/0x4e0 net/core/skbuff.c:705
inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
inet_frag_put ./include/net/inet_frag.h:133
nf_ct_frag6_gather+0x1125/0x38b0 net/ipv6/netfilter/nf_conntrack_reasm.c:617
ipv6_defrag+0x21b/0x350 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
nf_hook_entry_hookfn ./include/linux/netfilter.h:102
nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
nf_hook ./include/linux/netfilter.h:212
__ip6_local_out+0x52c/0xaf0 net/ipv6/output_core.c:160
ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
rawv6_push_pending_frames net/ipv6/raw.c:613
rawv6_sendmsg+0x2cff/0x4130 net/ipv6/raw.c:927
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
sock_sendmsg_nosec net/socket.c:635
sock_sendmsg+0xca/0x110 net/socket.c:645
sock_write_iter+0x326/0x620 net/socket.c:848
new_sync_write fs/read_write.c:499
__vfs_write+0x483/0x760 fs/read_write.c:512
vfs_write+0x187/0x530 fs/read_write.c:560
SYSC_write fs/read_write.c:607
SyS_write+0xfb/0x230 fs/read_write.c:599
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
RIP: 0033:0x7ff26e6f5b79
RSP: 002b:
00007ff268e0ed98 EFLAGS:
00000206 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
00007ff268e0f9c0 RCX:
00007ff26e6f5b79
RDX:
0000000000000010 RSI:
0000000020f50fe1 RDI:
0000000000000003
RBP:
00007ff26ebc1220 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000206 R12:
0000000000000000
R13:
00007ff268e0f9c0 R14:
00007ff26efec040 R15:
0000000000000003
The buggy address belongs to the object at
ffff880062da0000
which belongs to the cache RAWv6 of size 1504
The buggy address
ffff880062da0060 is located 96 bytes inside
of 1504-byte region [
ffff880062da0000,
ffff880062da05e0)
Freed by task 4113:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514
kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
slab_free_hook mm/slub.c:1352
slab_free_freelist_hook mm/slub.c:1374
slab_free mm/slub.c:2951
kmem_cache_free+0xb2/0x2c0 mm/slub.c:2973
sk_prot_free net/core/sock.c:1377
__sk_destruct+0x49c/0x6e0 net/core/sock.c:1452
sk_destruct+0x47/0x80 net/core/sock.c:1460
__sk_free+0x57/0x230 net/core/sock.c:1468
sk_free+0x23/0x30 net/core/sock.c:1479
sock_put ./include/net/sock.h:1638
sk_common_release+0x31e/0x4e0 net/core/sock.c:2782
rawv6_close+0x54/0x80 net/ipv6/raw.c:1214
inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
inet6_release+0x50/0x70 net/ipv6/af_inet6.c:431
sock_release+0x8d/0x1e0 net/socket.c:599
sock_close+0x16/0x20 net/socket.c:1063
__fput+0x332/0x7f0 fs/file_table.c:208
____fput+0x15/0x20 fs/file_table.c:244
task_work_run+0x19b/0x270 kernel/task_work.c:116
exit_task_work ./include/linux/task_work.h:21
do_exit+0x186b/0x2800 kernel/exit.c:839
do_group_exit+0x149/0x420 kernel/exit.c:943
SYSC_exit_group kernel/exit.c:954
SyS_exit_group+0x1d/0x20 kernel/exit.c:952
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
Allocated by task 4115:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
slab_post_alloc_hook mm/slab.h:432
slab_alloc_node mm/slub.c:2708
slab_alloc mm/slub.c:2716
kmem_cache_alloc+0x1af/0x250 mm/slub.c:2721
sk_prot_alloc+0x65/0x2a0 net/core/sock.c:1334
sk_alloc+0x105/0x1010 net/core/sock.c:1396
inet6_create+0x44d/0x1150 net/ipv6/af_inet6.c:183
__sock_create+0x4f6/0x880 net/socket.c:1199
sock_create net/socket.c:1239
SYSC_socket net/socket.c:1269
SyS_socket+0xf9/0x230 net/socket.c:1249
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
Memory state around the buggy address:
ffff880062d9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880062d9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffff880062da0000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff880062da0080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880062da0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 1 Mar 2017 22:28:39 +0000 (14:28 -0800)]
net: net_enable_timestamp() can be called from irq contexts
[ Upstream commit
13baa00ad01bb3a9f893e3a08cbc2d072fc0c15d ]
It is now very clear that silly TCP listeners might play with
enabling/disabling timestamping while new children are added
to their accept queue.
Meaning net_enable_timestamp() can be called from BH context
while current state of the static key is not enabled.
Lets play safe and allow all contexts.
The work queue is scheduled only under the problematic cases,
which are the static key enable/disable transition, to not slow down
critical paths.
This extends and improves what we did in commit
5fa8bbda38c6 ("net: use
a work queue to defer net_disable_timestamp() work")
Fixes:
b90e5794c5bd ("net: dont call jump_label_dec from irq context")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Potapenko [Wed, 1 Mar 2017 11:57:20 +0000 (12:57 +0100)]
net: don't call strlen() on the user buffer in packet_bind_spkt()
[ Upstream commit
540e2894f7905538740aaf122bd8e0548e1c34a4 ]
KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of
uninitialized memory in packet_bind_spkt():
Acked-by: Eric Dumazet <edumazet@google.com>
==================================================================
BUG: KMSAN: use of unitialized memory
CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48
ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550
0000000000000000 0000000000000092 00000000ec400911 0000000000000002
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<
ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51
[<
ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003
[<
ffffffff818a783b>] __msan_warning+0x5b/0xb0
mm/kmsan/kmsan_instr.c:424
[< inline >] strlen lib/string.c:484
[<
ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144
[<
ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230
net/packet/af_packet.c:3132
[<
ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370
[<
ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
[<
ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
chained origin:
00000000eba00911
[<
ffffffff810bb787>] save_stack_trace+0x27/0x50
arch/x86/kernel/stacktrace.c:67
[< inline >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322
[< inline >] kmsan_save_stack mm/kmsan/kmsan.c:334
[<
ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0
mm/kmsan/kmsan.c:527
[<
ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130
mm/kmsan/kmsan_instr.c:380
[<
ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356
[<
ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
[<
ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
origin description: ----address@SYSC_bind (origin=
00000000eb400911)
==================================================================
(the line numbers are relative to 4.8-rc6, but the bug persists
upstream)
, when I run the following program as root:
=====================================
#include <string.h>
#include <sys/socket.h>
#include <netpacket/packet.h>
#include <net/ethernet.h>
int main() {
struct sockaddr addr;
memset(&addr, 0xff, sizeof(addr));
addr.sa_family = AF_PACKET;
int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL));
bind(fd, &addr, sizeof(addr));
return 0;
}
=====================================
This happens because addr.sa_data copied from the userspace is not
zero-terminated, and copying it with strlcpy() in packet_bind_spkt()
results in calling strlen() on the kernel copy of that non-terminated
buffer.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Manning [Wed, 1 Mar 2017 09:55:28 +0000 (09:55 +0000)]
net: bridge: allow IPv6 when multicast flood is disabled
[ Upstream commit
8953de2f02ad7b15e4964c82f9afd60f128e4e98 ]
Even with multicast flooding turned off, IPv6 ND should still work so
that IPv6 connectivity is provided. Allow this by continuing to flood
multicast traffic originated by us.
Fixes:
b6cb5ac8331b ("net: bridge: add per-port multicast flood flag")
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Mike Manning <mmanning@brocade.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 1 Mar 2017 16:39:49 +0000 (08:39 -0800)]
tcp/dccp: block BH for SYN processing
[ Upstream commit
449809a66c1d0b1563dee84493e14bf3104d2d7e ]
SYN processing really was meant to be handled from BH.
When I got rid of BH blocking while processing socket backlog
in commit
5413d1babe8f ("net: do not block BH while processing socket
backlog"), I forgot that a malicious user could transition to TCP_LISTEN
from a state that allowed (SYN) packets to be parked in the socket
backlog while socket is owned by the thread doing the listen() call.
Sure enough syzkaller found this and reported the bug ;)
=================================
[ INFO: inconsistent lock state ]
4.10.0+ #60 Not tainted
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
syz-executor0/5090 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at:
[<
ffffffff83a6a370>] spin_lock include/linux/spinlock.h:299 [inline]
(&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at:
[<
ffffffff83a6a370>] inet_ehash_insert+0x240/0xad0
net/ipv4/inet_hashtables.c:407
{IN-SOFTIRQ-W} state was registered at:
mark_irqflags kernel/locking/lockdep.c:2923 [inline]
__lock_acquire+0xbcf/0x3270 kernel/locking/lockdep.c:3295
lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:299 [inline]
inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407
reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline]
inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764
tcp_conn_request+0x25cc/0x3310 net/ipv4/tcp_input.c:6399
tcp_v4_conn_request+0x157/0x220 net/ipv4/tcp_ipv4.c:1262
tcp_rcv_state_process+0x802/0x4130 net/ipv4/tcp_input.c:5889
tcp_v4_do_rcv+0x56b/0x940 net/ipv4/tcp_ipv4.c:1433
tcp_v4_rcv+0x2e12/0x3210 net/ipv4/tcp_ipv4.c:1711
ip_local_deliver_finish+0x4ce/0xc40 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:257 [inline]
ip_local_deliver+0x1ce/0x710 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:492 [inline]
ip_rcv_finish+0xb1d/0x2110 net/ipv4/ip_input.c:396
NF_HOOK include/linux/netfilter.h:257 [inline]
ip_rcv+0xd90/0x19c0 net/ipv4/ip_input.c:487
__netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4179
__netif_receive_skb+0x2a/0x170 net/core/dev.c:4217
netif_receive_skb_internal+0x1d6/0x430 net/core/dev.c:4245
napi_skb_finish net/core/dev.c:4602 [inline]
napi_gro_receive+0x4e6/0x680 net/core/dev.c:4636
e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4033 [inline]
e1000_clean_rx_irq+0x5e0/0x1490
drivers/net/ethernet/intel/e1000/e1000_main.c:4489
e1000_clean+0xb9a/0x2910 drivers/net/ethernet/intel/e1000/e1000_main.c:3834
napi_poll net/core/dev.c:5171 [inline]
net_rx_action+0xe70/0x1900 net/core/dev.c:5236
__do_softirq+0x2fb/0xb7d kernel/softirq.c:284
invoke_softirq kernel/softirq.c:364 [inline]
irq_exit+0x19e/0x1d0 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:658 [inline]
do_IRQ+0x81/0x1a0 arch/x86/kernel/irq.c:250
ret_from_intr+0x0/0x20
native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:53
arch_safe_halt arch/x86/include/asm/paravirt.h:98 [inline]
default_idle+0x8f/0x410 arch/x86/kernel/process.c:271
arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:262
default_idle_call+0x36/0x60 kernel/sched/idle.c:96
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x348/0x440 kernel/sched/idle.c:243
cpu_startup_entry+0x18/0x20 kernel/sched/idle.c:345
start_secondary+0x344/0x440 arch/x86/kernel/smpboot.c:272
verify_cpu+0x0/0xfc
irq event stamp: 1741
hardirqs last enabled at (1741): [<
ffffffff84d49d77>]
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160
[inline]
hardirqs last enabled at (1741): [<
ffffffff84d49d77>]
_raw_spin_unlock_irqrestore+0xf7/0x1a0 kernel/locking/spinlock.c:191
hardirqs last disabled at (1740): [<
ffffffff84d4a732>]
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (1740): [<
ffffffff84d4a732>]
_raw_spin_lock_irqsave+0xa2/0x110 kernel/locking/spinlock.c:159
softirqs last enabled at (1738): [<
ffffffff84d4deff>]
__do_softirq+0x7cf/0xb7d kernel/softirq.c:310
softirqs last disabled at (1571): [<
ffffffff84d4b92c>]
do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&hashinfo->ehash_locks[i])->rlock);
<Interrupt>
lock(&(&hashinfo->ehash_locks[i])->rlock);
*** DEADLOCK ***
1 lock held by syz-executor0/5090:
#0: (sk_lock-AF_INET6){+.+.+.}, at: [<
ffffffff83406b43>] lock_sock
include/net/sock.h:1460 [inline]
#0: (sk_lock-AF_INET6){+.+.+.}, at: [<
ffffffff83406b43>]
sock_setsockopt+0x233/0x1e40 net/core/sock.c:683
stack backtrace:
CPU: 1 PID: 5090 Comm: syz-executor0 Not tainted 4.10.0+ #60
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x292/0x398 lib/dump_stack.c:51
print_usage_bug+0x3ef/0x450 kernel/locking/lockdep.c:2387
valid_state kernel/locking/lockdep.c:2400 [inline]
mark_lock_irq kernel/locking/lockdep.c:2602 [inline]
mark_lock+0xf30/0x1410 kernel/locking/lockdep.c:3065
mark_irqflags kernel/locking/lockdep.c:2941 [inline]
__lock_acquire+0x6dc/0x3270 kernel/locking/lockdep.c:3295
lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:299 [inline]
inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407
reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline]
inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764
dccp_v6_conn_request+0xada/0x11b0 net/dccp/ipv6.c:380
dccp_rcv_state_process+0x51e/0x1660 net/dccp/input.c:606
dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632
sk_backlog_rcv include/net/sock.h:896 [inline]
__release_sock+0x127/0x3a0 net/core/sock.c:2052
release_sock+0xa5/0x2b0 net/core/sock.c:2539
sock_setsockopt+0x60f/0x1e40 net/core/sock.c:1016
SYSC_setsockopt net/socket.c:1782 [inline]
SyS_setsockopt+0x2fb/0x3a0 net/socket.c:1765
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x4458b9
RSP: 002b:
00007fe8b26c2b58 EFLAGS:
00000292 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
0000000000000006 RCX:
00000000004458b9
RDX:
000000000000001a RSI:
0000000000000001 RDI:
0000000000000006
RBP:
00000000006e2110 R08:
0000000000000010 R09:
0000000000000000
R10:
00000000208c3000 R11:
0000000000000292 R12:
0000000000708000
R13:
0000000020000000 R14:
0000000000001000 R15:
0000000000000000
Fixes:
5413d1babe8f ("net: do not block BH while processing socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel [Tue, 28 Feb 2017 07:55:40 +0000 (08:55 +0100)]
mlxsw: spectrum_router: Avoid potential packets loss
[ Upstream commit
f7df4923fa986247e93ec2cdff5ca168fff14dcf ]
When the structure of the LPM tree changes (f.e., due to the addition of
a new prefix), we unbind the old tree and then bind the new one. This
may result in temporary packet loss.
Instead, overwrite the old binding with the new one.
Fixes:
6b75c4807db3 ("mlxsw: spectrum_router: Add virtual router management")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub Kicinski [Fri, 24 Feb 2017 19:43:37 +0000 (11:43 -0800)]
geneve: lock RCU on TX path
[ Upstream commit
a717e3f740803cc88bd5c9a70c93504f6a368663 ]
There is no guarantees that callers of the TX path will hold
the RCU lock. Grab it explicitly.
Fixes:
fceb9c3e3825 ("geneve: avoid using stale geneve socket.")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub Kicinski [Fri, 24 Feb 2017 19:43:36 +0000 (11:43 -0800)]
vxlan: lock RCU on TX path
[ Upstream commit
56de859e9967c070464a9a9f4f18d73f9447298e ]
There is no guarantees that callers of the TX path will hold
the RCU lock. Grab it explicitly.
Fixes:
c6fcc4fc5f8b ("vxlan: avoid using stale vxlan socket.")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Fri, 20 Jan 2017 23:31:52 +0000 (15:31 -0800)]
net: phy: Avoid deadlock during phy_error()
[ Upstream commit
eab127717a6af54401ba534790c793ec143cd1fc ]
phy_error() is called in the PHY state machine workqueue context, and
calls phy_trigger_machine() which does a cancel_delayed_work_sync() of
the workqueue we execute from, causing a deadlock situation.
Augment phy_trigger_machine() machine with a sync boolean indicating
whether we should use cancel_*_sync() or just cancel_*_work().
Fixes:
3c293f4e08b5 ("net: phy: Trigger state machine on state change and not polling.")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Hüber [Sun, 26 Feb 2017 16:58:19 +0000 (17:58 +0100)]
l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
[ Upstream commit
51fb60eb162ab84c5edf2ae9c63cf0b878e5547e ]
l2tp_ip_backlog_recv may not return -1 if the packet gets dropped.
The return value is passed up to ip_local_deliver_finish, which treats
negative values as an IP protocol number for resubmission.
Signed-off-by: Paul Hüber <phueber@kernsp.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Mashak [Fri, 24 Feb 2017 16:00:32 +0000 (11:00 -0500)]
net sched actions: decrement module reference count after table flush.
[ Upstream commit
edb9d1bff4bbe19b8ae0e71b1f38732591a9eeb2 ]
When tc actions are loaded as a module and no actions have been installed,
flushing them would result in actions removed from the memory, but modules
reference count not being decremented, so that the modules would not be
unloaded.
Following is example with GACT action:
% sudo modprobe act_gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions ls action gact
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 1
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 2
% sudo rmmod act_gact
rmmod: ERROR: Module act_gact is in use
....
After the fix:
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions add action pass index 1
% sudo tc actions add action pass index 2
% sudo tc actions add action pass index 3
% lsmod
Module Size Used by
act_gact 16384 3
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
%
% sudo tc actions flush action gact
% lsmod
Module Size Used by
act_gact 16384 0
% sudo rmmod act_gact
% lsmod
Module Size Used by
%
Fixes:
f97017cdefef ("net-sched: Fix actions flushing")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Anastasov [Sun, 26 Feb 2017 15:14:35 +0000 (17:14 +0200)]
ipv4: mask tos for input route
[ Upstream commit
6e28099d38c0e50d62c1afc054e37e573adf3d21 ]
Restore the lost masking of TOS in input route code to
allow ip rules to match it properly.
Problem [1] noticed by Shmulik Ladkani <shmulik.ladkani@gmail.com>
[1] http://marc.info/?t=
137331755300040&r=1&w=2
Fixes:
89aef8921bfb ("ipv4: Delete routing cache.")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Russell [Fri, 24 Feb 2017 17:47:11 +0000 (17:47 +0000)]
vxlan: don't allow overwrite of config src addr
[ Upstream commit
1158632b5a2dcce0786c1b1b99654e81cc867981 ]
When using IPv6 transport and a default dst, a pointer to the configured
source address is passed into the route lookup. If no source address is
configured, then the value is overwritten.
IPv6 route lookup ignores egress ifindex match if the source address is set,
so if egress ifindex match is desired, the source address must be passed
as any. The overwrite breaks this for subsequent lookups.
Avoid this by copying the configured address to an existing stack variable
and pass a pointer to that instead.
Fixes:
272d96a5ab10 ("net: vxlan: lwt: Use source ip address during route lookup.")
Signed-off-by: Brian Russell <brussell@brocade.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Forster [Fri, 24 Feb 2017 14:20:32 +0000 (14:20 +0000)]
vti6: return GRE_KEY for vti6
[ Upstream commit
7dcdf941cdc96692ab99fd790c8cc68945514851 ]
Align vti6 with vti by returning GRE_KEY flag. This enables iproute2
to display tunnel keys on "ip -6 tunnel show"
Signed-off-by: David Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Schiffer [Thu, 23 Feb 2017 16:19:41 +0000 (17:19 +0100)]
vxlan: correctly validate VXLAN ID against VXLAN_N_VID
[ Upstream commit
4e37d6911f36545b286d15073f6f2222f840e81c ]
The incorrect check caused an off-by-one error: the maximum VID 0xffffff
was unusable.
Fixes:
d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tariq Toukan [Wed, 22 Feb 2017 15:20:16 +0000 (17:20 +0200)]
net/mlx5e: Fix wrong CQE decompression
[ Upstream commit
36154be40a28e4afaa0416da2681d80b7e2ca319 ]
In cqe compression with striding RQ, the decompression of the CQE field
wqe_counter was done with a wrong wraparound value.
This caused handling cqes with a wrong pointer to wqe (rx descriptor)
and creating SKBs with wrong data, pointing to wrong (and already consumed)
strides/pages.
The meaning of the CQE field wqe_counter in striding RQ holds the
stride index instead of the WQE index. Hence, when decompressing
a CQE, wqe_counter should have wrapped-around the number of strides
in a single multi-packet WQE.
We dropped this wrap-around mask at all in CQE decompression of striding
RQ. It is not needed as in such cases the CQE compression session would
break because of different value of wqe_id field, starting a new
compression session.
Tested:
ethtool -K ethxx lro off/on
ethtool --set-priv-flags ethxx rx_cqe_compress on
super_netperf 16 {ipv4,ipv6} -t TCP_STREAM -m 50 -D
verified no csum errors and no page refcount issues.
Fixes:
7219ab34f184 ("net/mlx5e: CQE compression")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Tom Herbert <tom@herbertland.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tariq Toukan [Wed, 22 Feb 2017 15:20:13 +0000 (17:20 +0200)]
net/mlx5e: Do not reduce LRO WQE size when not using build_skb
[ Upstream commit
4078e637c12f1e0a74293f1ec9563f42bff14a03 ]
When rq_type is Striding RQ, no room of SKB_RESERVE is needed
as SKB allocation is not done via build_skb.
Fixes:
e4b85508072b ("net/mlx5e: Slightly reduce hardware LRO size")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saeed Mahameed [Wed, 22 Feb 2017 15:20:12 +0000 (17:20 +0200)]
net/mlx5e: Register/unregister vport representors on interface attach/detach
[ Upstream commit
6f08a22c5fb2b9aefb8ecd8496758e7a677c1fde ]
Currently vport representors are added only on driver load and removed on
driver unload. Apparently we forgot to handle them when we added the
seamless reset flow feature. This caused to leave the representors
netdevs alive and active with open HW resources on pci shutdown and on
error reset flows.
To overcome this we move their handling to interface attach/detach, so
they would be cleaned up on shutdown and recreated on reset flows.
Fixes:
26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 18 Mar 2017 11:15:30 +0000 (19:15 +0800)]
Linux 4.9.16
Kamal Heib [Wed, 18 Jan 2017 12:10:32 +0000 (14:10 +0200)]
IB/mlx5: Verify that Q counters are supported
commit
45bded2c216da6010184ac5ebe88c27f73439009 upstream.
Make sure that the Q counters are supported by the FW before trying
to allocate/deallocte them, this will avoid driver load failure when
they aren't supported by the FW.
Fixes:
0837e86a7a34 ('IB/mlx5: Add per port counters')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 14 Feb 2017 16:31:15 +0000 (11:31 -0500)]
ext4: don't BUG when truncating encrypted inodes on the orphan list
commit
0d06863f903ac5f4f6efb0273079d27de3e53a28 upstream.
Fix a BUG when the kernel tries to mount a file system constructed as
follows:
echo foo > foo.txt
mke2fs -Fq -t ext4 -O encrypt foo.img 100
debugfs -w foo.img << EOF
write foo.txt a
set_inode_field a i_flags 0x80800
set_super_value s_last_orphan 12
quit
EOF
root@kvm-xfstests:~# mount -o loop foo.img /mnt
[ 160.238770] ------------[ cut here ]------------
[ 160.240106] kernel BUG at /usr/projects/linux/ext4/fs/ext4/inode.c:3874!
[ 160.240106] invalid opcode: 0000 [#1] SMP
[ 160.240106] Modules linked in:
[ 160.240106] CPU: 0 PID: 2547 Comm: mount Tainted: G W 4.10.0-rc3-00034-gcdd33b941b67 #227
[ 160.240106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014
[ 160.240106] task:
f4518000 task.stack:
f47b6000
[ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4
[ 160.240106] EFLAGS:
00010246 CPU: 0
[ 160.240106] EAX:
00000001 EBX:
f7be4b50 ECX:
f47b7dc0 EDX:
00000007
[ 160.240106] ESI:
f43b05a8 EDI:
f43babec EBP:
f47b7dd0 ESP:
f47b7dac
[ 160.240106] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 160.240106] CR0:
80050033 CR2:
bfd85b08 CR3:
34a00680 CR4:
000006f0
[ 160.240106] Call Trace:
[ 160.240106] ext4_truncate+0x1e9/0x3e5
[ 160.240106] ext4_fill_super+0x286f/0x2b1e
[ 160.240106] ? set_blocksize+0x2e/0x7e
[ 160.240106] mount_bdev+0x114/0x15f
[ 160.240106] ext4_mount+0x15/0x17
[ 160.240106] ? ext4_calculate_overhead+0x39d/0x39d
[ 160.240106] mount_fs+0x58/0x115
[ 160.240106] vfs_kern_mount+0x4b/0xae
[ 160.240106] do_mount+0x671/0x8c3
[ 160.240106] ? _copy_from_user+0x70/0x83
[ 160.240106] ? strndup_user+0x31/0x46
[ 160.240106] SyS_mount+0x57/0x7b
[ 160.240106] do_int80_syscall_32+0x4f/0x61
[ 160.240106] entry_INT80_32+0x2f/0x2f
[ 160.240106] EIP: 0xb76b919e
[ 160.240106] EFLAGS:
00000246 CPU: 0
[ 160.240106] EAX:
ffffffda EBX:
08053838 ECX:
08052188 EDX:
080537e8
[ 160.240106] ESI:
c0ed0000 EDI:
00000000 EBP:
080537e8 ESP:
bfa13660
[ 160.240106] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[ 160.240106] Code: 59 8b 00 a8 01 0f 84 09 01 00 00 8b 07 66 25 00 f0 66 3d 00 80 75 61 89 f8 e8 3e e2 ff ff 84 c0 74 56 83 bf 48 02 00 00 00 75 02 <0f> 0b 81 7d e8 00 10 00 00 74 02 0f 0b 8b 43 04 8b 53 08 31 c9
[ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 SS:ESP: 0068:
f47b7dac
[ 160.317241] ---[ end trace
d6a773a375c810a5 ]---
The problem is that when the kernel tries to truncate an inode in
ext4_truncate(), it tries to clear any on-disk data beyond i_size.
Without the encryption key, it can't do that, and so it triggers a
BUG.
E2fsck does *not* provide this service, and in practice most file
systems have their orphan list processed by e2fsck, so to avoid
crashing, this patch skips this step if we don't have access to the
encryption key (which is the case when processing the orphan list; in
all other cases, we will have the encryption key, or the kernel
wouldn't have allowed the file to be opened).
An open question is whether the fact that e2fsck isn't clearing the
bytes beyond i_size causing problems --- and if we've lived with it
not doing it for so long, can we drop this from the kernel replay of
the orphan list in all cases (not just when we don't have the key for
encrypted inodes).
Addresses-Google-Bug: #
35209576
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Wed, 22 Feb 2017 21:48:01 +0000 (18:48 -0300)]
rc: raw decoder for keymap protocol is not loaded on register
commit
413808685dd7c9b54bbc5af79da2eaddd0fc3cb2 upstream.
When the protocol is set via the sysfs protocols attribute, the
decoder is loaded. However, when it is not when a device is first
plugged in or registered.
Fixes: acc1c3c ("[media] media: rc: load decoder modules on-demand")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Wed, 15 Feb 2017 16:26:10 +0000 (11:26 -0500)]
dm: flush queued bios when process blocks to avoid deadlock
commit
d67a5f4b5947aba4bfe9a80a2b86079c215ca755 upstream.
Commit
df2cb6daa4 ("block: Avoid deadlocks with bio allocation by
stacking drivers") created a workqueue for every bio set and code
in bio_alloc_bioset() that tries to resolve some low-memory deadlocks
by redirecting bios queued on current->bio_list to the workqueue if the
system is low on memory. However other deadlocks (see below **) may
happen, without any low memory condition, because generic_make_request
is queuing bios to current->bio_list (rather than submitting them).
** the related dm-snapshot deadlock is detailed here:
https://www.redhat.com/archives/dm-devel/2016-July/msg00065.html
Fix this deadlock by redirecting any bios on current->bio_list to the
bio_set's rescue workqueue on every schedule() call. Consequently,
when the process blocks on a mutex, the bios queued on
current->bio_list are dispatched to independent workqueus and they can
complete without waiting for the mutex to be available.
The structure blk_plug contains an entry cb_list and this list can contain
arbitrary callback functions that are called when the process blocks.
To implement this fix DM (ab)uses the onstack plug's cb_list interface
to get its flush_current_bio_list() called at schedule() time.
This fixes the snapshot deadlock - if the map method blocks,
flush_current_bio_list() will be called and it redirects bios waiting
on current->bio_list to appropriate workqueues.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1267650
Depends-on:
df2cb6daa4 ("block: Avoid deadlocks with bio allocation by stacking drivers")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jintack Lim [Mon, 6 Mar 2017 13:42:37 +0000 (05:42 -0800)]
KVM: arm/arm64: Let vcpu thread modify its own active state
commit
370a0ec1819990f8e2a93df7cc9c0146980ed45f upstream.
Currently, if a vcpu thread tries to change the active state of an
interrupt which is already on the same vcpu's AP list, it will loop
forever. Since the VGIC mmio handler is called after a vcpu has
already synced back the LR state to the struct vgic_irq, we can just
let it proceed safely.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Janosch Frank [Thu, 2 Mar 2017 14:23:42 +0000 (15:23 +0100)]
KVM: s390: Fix guest migration for huge guests resulting in panic
commit
2e4d88009f57057df7672fa69a32b5224af54d37 upstream.
While we can technically not run huge page guests right now, we can
setup a guest with huge pages. Trying to migrate it will trigger a
VM_BUG_ON and, if the kernel is not configured to panic on a BUG, it
will happily try to work on non-existing page table entries.
With this patch, we always return "dirty" if we encounter a large page
when migrating. This at least fixes the immediate problem until we
have proper handling for both kind of pages.
Fixes: 15f36eb ("KVM: s390: Add proper dirty bitmap support to S390 kvm.")
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Sat, 25 Feb 2017 16:36:44 +0000 (18:36 +0200)]
serial: samsung: Continue to work if DMA request fails
commit
f98c7bce570bdbe344b74ff5daa7dfeef3f22929 upstream.
If DMA is not available (even when configured in DeviceTree), the driver
will fail the startup procedure thus making serial console not
available.
For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210):
[ 1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@
12680000
...
[ 11.435732] samsung-uart
13800000.serial: DMA request failed
[ 72.963893] samsung-uart
13800000.serial: DMA request failed
[ 73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
DMA is not necessary for serial to work, so continue with UART startup
after emitting a warning.
Fixes:
62c37eedb74c ("serial: samsung: add dma reqest/release functions")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 6 Mar 2017 16:36:40 +0000 (17:36 +0100)]
USB: serial: io_ti: fix information leak in completion handler
commit
654b404f2a222f918af9b0cd18ad469d0c941a8e upstream.
Add missing sanity check to the bulk-in completion handler to avoid an
integer underflow that can be triggered by a malicious device.
This avoids leaking 128 kB of memory content from after the URB transfer
buffer to user space.
Fixes:
8c209e6782ca ("USB: make actual_length in struct urb field u32")
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 6 Mar 2017 16:36:37 +0000 (17:36 +0100)]
USB: serial: io_ti: fix NULL-deref in interrupt callback
commit
0b1d250afb8eb9d65afb568bac9b9f9253a82b49 upstream.
Fix a NULL-pointer dereference in the interrupt callback should a
malicious device send data containing a bad port number by adding the
missing sanity check.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 7 Mar 2017 15:11:04 +0000 (16:11 +0100)]
USB: iowarrior: fix NULL-deref in write
commit
de46e56653de7b3b54baa625bd582635008b8d05 upstream.
Make sure to verify that we have the required interrupt-out endpoint for
IOWarrior56 devices to avoid dereferencing a NULL-pointer in write
should a malicious device lack such an endpoint.
Fixes:
946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 7 Mar 2017 15:11:03 +0000 (16:11 +0100)]
USB: iowarrior: fix NULL-deref at probe
commit
b7321e81fc369abe353cf094d4f0dc2fe11ab95f upstream.
Make sure to check for the required interrupt-in endpoint to avoid
dereferencing a NULL-pointer should a malicious device lack such an
endpoint.
Note that a fairly recent change purported to fix this issue, but added
an insufficient test on the number of endpoints only, a test which can
now be removed.
Fixes:
4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors")
Fixes:
946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 6 Mar 2017 16:36:38 +0000 (17:36 +0100)]
USB: serial: omninet: fix reference leaks at open
commit
30572418b445d85fcfe6c8fe84c947d2606767d8 upstream.
This driver needlessly took another reference to the tty on open, a
reference which was then never released on close. This lead to not just
a leak of the tty, but also a driver reference leak that prevented the
driver from being unloaded after a port had once been opened.
Fixes:
4a90f09b20f4 ("tty: usb-serial krefs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 6 Mar 2017 16:36:41 +0000 (17:36 +0100)]
USB: serial: safe_serial: fix information leak in completion handler
commit
8c76d7cd520ebffc1ea9ea0850d87a224a50c7f2 upstream.
Add missing sanity check to the bulk-in completion handler to avoid an
integer underflow that could be triggered by a malicious device.
This avoids leaking up to 56 bytes from after the URB transfer buffer to
user space.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Thu, 9 Mar 2017 13:39:37 +0000 (15:39 +0200)]
usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
commit
dcc7620cad5ad1326a78f4031a7bf4f0e5b42984 upstream.
Upstream commit
98d74f9ceaef ("xhci: fix 10 second timeout on removal of
PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI
xhci controllers which can result in excessive timeouts, to the point where
the system reports a deadlock.
The same problem is seen with hot pluggable xhci controllers using the
xhci-plat driver, such as the driver used for Type-C ports on rk3399.
Similar to hot-pluggable PCI controllers, the driver for this chip
removes the xhci controller from the system when the Type-C cable is
disconnected.
The solution for PCI devices works just as well for non-PCI devices
and avoids the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Chen [Thu, 9 Mar 2017 13:39:36 +0000 (15:39 +0200)]
usb: host: xhci-dbg: HCIVERSION should be a binary number
commit
f95e60a7dbecd2de816bb3ad517b3d4fbc20b507 upstream.
According to xHCI spec, HCIVERSION containing a BCD encoding
of the xHCI specification revision number, 0100h corresponds
to xHCI version 1.0. Change "100" as "0x100".
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Fixes:
04abb6de2825 ("xhci: Read and parse new xhci 1.1 capability register")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadros [Thu, 2 Mar 2017 08:44:58 +0000 (10:44 +0200)]
Revert "usb: gadget: uvc: Add missing call for additional setup data"
commit
eb38d913c27f32f4df173791051fecf6aca34173 upstream.
This reverts commit
4fbac5206afd01b717d4bdc58793d471f3391b4b.
This commit breaks g_webcam when used with uvc-gadget [1].
The user space application (e.g. uvc-gadget) is responsible for
sending response to UVC class specific requests on control endpoint
in uvc_send_response() in uvc_v4l2.c.
The bad commit was causing a duplicate response to be sent with
incorrect response data thus causing UVC probe to fail at the host
and broken control transfer endpoint at the gadget.
[1] - git://git.ideasonboard.org/uvc-gadget.git
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Tue, 31 Jan 2017 12:54:45 +0000 (14:54 +0200)]
usb: gadget: function: f_fs: pass companion descriptor along
commit
2bfa0719ac2a9b2f3c91345873d3cdebd0296ba9 upstream.
If we're dealing with SuperSpeed endpoints, we need
to make sure to pass along the companion descriptor
and initialize fields needed by the Gadget
API. Eventually, f_fs.c should be converted to use
config_ep_by_speed() like all other functions,
though.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jelle Martijn Kok [Tue, 21 Feb 2017 11:48:18 +0000 (12:48 +0100)]
usb: ohci-at91: Do not drop unhandled USB suspend control requests
commit
85550f9148a852ed363a386577ad31b97b95dfb8 upstream.
In patch 2e2aa1bc7eff90ecm, USB suspend and wakeup control requests are
passed to SFR_OHCIICR register. If a processor does not have such a
register, this hub control request will be dropped.
If no such a SFR register is available, all USB suspend control requests
will now be processed using ohci_hub_control()
(like before patch 2e2aa1bc7eff90ecm.)
Tested on an Atmel AT91SAM9G20 with an on-board TI TUSB2046B hub chip
If the last USB device is unplugged from the USB hub, the hub goes into
sleep and will not wakeup when an USB devices is inserted.
Fixes:
2e2aa1bc7eff90ec ("usb: ohci-at91: Forcibly suspend ports while USB suspend")
Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadros [Wed, 15 Feb 2017 11:38:22 +0000 (13:38 +0200)]
usb: dwc3-omap: Fix missing break in dwc3_omap_set_mailbox()
commit
0913750f9fb6f26bcd00c8f9dd9a8d1b8d031246 upstream.
We need to break from all cases if we want to treat
each one of them separately.
Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Fixes:
d2728fb3e01f ("usb: dwc3: omap: Pass VBUS and ID events transparently")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Tue, 31 Jan 2017 11:24:54 +0000 (13:24 +0200)]
usb: dwc3: gadget: make Set Endpoint Configuration macros safe
commit
7369090a9fb57c3fc705ce355d2e4523a5a24716 upstream.
Some gadget drivers are bad, bad boys. We notice
that ADB was passing bad Burst Size which caused top
bits of param0 to be overwritten which confused DWC3
when running this command.
In order to avoid future issues, we're going to make
sure values passed by macros are always safe for the
controller. Note that ADB still needs a fix to *not*
pass bad values.
Reported-by: Mohamed Abbas <mohamed.abbas@intel.com>
Sugested-by: Adam Andruszak <adam.andruszak@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Chen [Tue, 28 Feb 2017 06:25:45 +0000 (14:25 +0800)]
usb: gadget: dummy_hcd: clear usb_gadget region before registration
commit
5bbc852676ae08e818241cf66a3ffe4be44225c4 upstream.
When the user does device unbind and rebind test, the kernel will
show below dump due to usb_gadget memory region is dirty after unbind.
Clear usb_gadget region for every new probe.
root@imx6qdlsolo:/sys/bus/platform/drivers/dummy_udc# echo dummy_udc.0 > bind
[ 102.523312] kobject (
eddd78b0): tried to init an initialized object, something is seriously wrong.
[ 102.532447] CPU: 0 PID: 734 Comm: sh Not tainted 4.10.0-rc7-00872-g1b2b8e9 #1298
[ 102.539866] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[ 102.545717] Backtrace:
[ 102.548225] [<
c010d090>] (dump_backtrace) from [<
c010d338>] (show_stack+0x18/0x1c)
[ 102.555822] r7:
ede34000 r6:
60010013 r5:
00000000 r4:
c0f29418
[ 102.561512] [<
c010d320>] (show_stack) from [<
c040c2a4>] (dump_stack+0xb4/0xe8)
[ 102.568764] [<
c040c1f0>] (dump_stack) from [<
c040e6d4>] (kobject_init+0x80/0x9c)
[ 102.576187] r10:
0000001f r9:
eddd7000 r8:
eeaf8c10 r7:
eddd78a8 r6:
c177891c r5:
c0f3b060
[ 102.584036] r4:
eddd78b0 r3:
00000000
[ 102.587641] [<
c040e654>] (kobject_init) from [<
c05359a4>] (device_initialize+0x28/0xf8)
[ 102.595665] r5:
eebc4800 r4:
eddd78a8
[ 102.599268] [<
c053597c>] (device_initialize) from [<
c05382ac>] (device_register+0x14/0x20)
[ 102.607556] r7:
eddd78a8 r6:
00000000 r5:
eebc4800 r4:
eddd78a8
[ 102.613256] [<
c0538298>] (device_register) from [<
c0668ef4>] (usb_add_gadget_udc_release+0x8c/0x1ec)
[ 102.622410] r5:
eebc4800 r4:
eddd7860
[ 102.626015] [<
c0668e68>] (usb_add_gadget_udc_release) from [<
c0669068>] (usb_add_gadget_udc+0x14/0x18)
[ 102.635351] r10:
0000001f r9:
eddd7000 r8:
eddd788c r7:
bf003770 r6:
eddd77f8 r5:
eddd7818
[ 102.643198] r4:
eddd785c r3:
eddd7b24
[ 102.646834] [<
c0669054>] (usb_add_gadget_udc) from [<
bf003428>] (dummy_udc_probe+0x170/0x1c4 [dummy_hcd])
[ 102.656458] [<
bf0032b8>] (dummy_udc_probe [dummy_hcd]) from [<
c053d114>] (platform_drv_probe+0x54/0xb8)
[ 102.665881] r10:
00000008 r9:
c1778960 r8:
bf004128 r7:
fffffdfb r6:
bf004128 r5:
eeaf8c10
[ 102.673727] r4:
eeaf8c10
[ 102.676293] [<
c053d0c0>] (platform_drv_probe) from [<
c053b160>] (driver_probe_device+0x264/0x474)
[ 102.685186] r7:
00000000 r6:
00000000 r5:
c1778960 r4:
eeaf8c10
[ 102.690876] [<
c053aefc>] (driver_probe_device) from [<
c05397c4>] (bind_store+0xb8/0x14c)
[ 102.698994] r10:
eeb3bb4c r9:
ede34000 r8:
0000000c r7:
eeaf8c44 r6:
bf004128 r5:
c0f3b668
[ 102.706840] r4:
eeaf8c10
[ 102.709402] [<
c053970c>] (bind_store) from [<
c0538ca8>] (drv_attr_store+0x28/0x34)
[ 102.716998] r9:
ede34000 r8:
00000000 r7:
ee3863c0 r6:
ee3863c0 r5:
c0538c80 r4:
c053970c
[ 102.724776] [<
c0538c80>] (drv_attr_store) from [<
c029c930>] (sysfs_kf_write+0x50/0x54)
[ 102.732711] r5:
c0538c80 r4:
0000000c
[ 102.736313] [<
c029c8e0>] (sysfs_kf_write) from [<
c029be84>] (kernfs_fop_write+0x100/0x214)
[ 102.744599] r7:
ee3863c0 r6:
eeb3bb40 r5:
00000000 r4:
00000000
[ 102.750287] [<
c029bd84>] (kernfs_fop_write) from [<
c0222dd8>] (__vfs_write+0x34/0x120)
[ 102.758231] r10:
00000000 r9:
ede34000 r8:
c0108bc4 r7:
0000000c r6:
ede35f80 r5:
c029bd84
[ 102.766077] r4:
ee223780
[ 102.768638] [<
c0222da4>] (__vfs_write) from [<
c0224678>] (vfs_write+0xa8/0x170)
[ 102.775974] r9:
ede34000 r8:
c0108bc4 r7:
ede35f80 r6:
01861cb0 r5:
ee223780 r4:
0000000c
[ 102.783743] [<
c02245d0>] (vfs_write) from [<
c0225498>] (SyS_write+0x4c/0xa8)
[ 102.790818] r9:
ede34000 r8:
c0108bc4 r7:
0000000c r6:
01861cb0 r5:
ee223780 r4:
ee223780
[ 102.798595] [<
c022544c>] (SyS_write) from [<
c0108a20>] (ret_fast_syscall+0x0/0x1c)
[ 102.806188] r7:
00000004 r6:
b6e83d58 r5:
01861cb0 r4:
0000000c
Fixes:
90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ethan Zhao [Mon, 27 Feb 2017 08:08:44 +0000 (17:08 +0900)]
PCI: Prevent VPD access for QLogic ISP2722
commit
0d5370d1d85251e5893ab7c90a429464de2e140b upstream.
QLogic ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter has the VPD
access issue too, while read the common pci-sysfs access interface shown as
/sys/devices/pci0000:00/0000:00:03.2/0000:0b:00.0/vpd
with simple 'cat' could cause system hang and panic:
Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources:
1. Integrated Management Log (IML)
2. OA Syslog
3. OA Forward Progress Log
4. iLO Event Log
CPU: 0 PID: 15070 Comm: udevadm Not tainted 4.1.12
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015
0000000000000086 000000007f0cdf51 ffff880c4fa05d58 ffffffff817193de
ffffffffa00b42d8 0000000000000075 ffff880c4fa05dd8 ffffffff81714072
0000000000000008 ffff880c4fa05de8 ffff880c4fa05d88 000000007f0cdf51
Call Trace:
<NMI> [<
ffffffff817193de>] dump_stack+0x63/0x81
[<
ffffffff81714072>] panic+0xd0/0x20e
[<
ffffffffa00b390d>] hpwdt_pretimeout+0xdd/0xe0 [hpwdt]
[<
ffffffff81021fc9>] ? sched_clock+0x9/0x10
[<
ffffffff8101c101>] nmi_handle+0x91/0x170
[<
ffffffff8101c10c>] ? nmi_handle+0x9c/0x170
[<
ffffffff8101c5fe>] io_check_error+0x1e/0xa0
[<
ffffffff8101c719>] default_do_nmi+0x99/0x140
[<
ffffffff8101c8b4>] do_nmi+0xf4/0x170
[<
ffffffff817232c5>] end_repeat_nmi+0x1a/0x1e
[<
ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
[<
ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
[<
ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
<<EOE>> [<
ffffffff815db4b3>] raw_pci_read+0x23/0x40
[<
ffffffff815db4fc>] pci_read+0x2c/0x30
[<
ffffffff8136f612>] pci_user_read_config_word+0x72/0x110
[<
ffffffff8136f746>] pci_vpd_pci22_wait+0x96/0x130
[<
ffffffff8136ff9b>] pci_vpd_pci22_read+0xdb/0x1a0
[<
ffffffff8136ea30>] pci_read_vpd+0x20/0x30
[<
ffffffff8137d590>] read_vpd_attr+0x30/0x40
[<
ffffffff8128e037>] sysfs_kf_bin_read+0x47/0x70
[<
ffffffff8128d24e>] kernfs_fop_read+0xae/0x180
[<
ffffffff8120dd97>] __vfs_read+0x37/0x100
[<
ffffffff812ba7e4>] ? security_file_permission+0x84/0xa0
[<
ffffffff8120e366>] ? rw_verify_area+0x56/0xe0
[<
ffffffff8120e476>] vfs_read+0x86/0x140
[<
ffffffff8120f3f5>] SyS_read+0x55/0xd0
[<
ffffffff81720f2e>] system_call_fastpath+0x12/0x71
Shutting down cpus with NMI
Kernel Offset: disabled
drm_kms_helper: panic occurred, switching back to text console
So blacklist the access to its VPD.
Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Balbir Singh [Fri, 3 Mar 2017 00:58:44 +0000 (11:58 +1100)]
powerpc/xics: Work around limitations of OPAL XICS priority handling
commit
a69e2fb70350a66f91175cd2625f1e8215c5b6e9 upstream.
The CPPR (Current Processor Priority Register) of a XICS interrupt
presentation controller contains a value N, such that only interrupts
with a priority "more favoured" than N will be received by the CPU,
where "more favoured" means "less than". So if the CPPR has the value 5
then only interrupts with a priority of 0-4 inclusive will be received.
In theory the CPPR can support a value of 0 to 255 inclusive.
In practice Linux only uses values of 0, 4, 5 and 0xff. Setting the CPPR
to 0 rejects all interrupts, setting it to 0xff allows all interrupts.
The values 4 and 5 are used to differentiate IPIs from external
interrupts. Setting the CPPR to 5 allows IPIs to be received but not
external interrupts.
The CPPR emulation in the OPAL XICS implementation only directly
supports priorities 0 and 0xff. All other priorities are considered
equivalent, and mapped to a single priority value internally. This means
when using icp-opal we can not allow IPIs but not externals.
This breaks Linux's use of priority values when a CPU is hot unplugged.
After migrating IRQs away from the CPU that is being offlined, we set
the priority to 5, meaning we still want the offline CPU to receive
IPIs. But the effect of the OPAL XICS emulation's use of a single
priority value is that all interrupts are rejected by the CPU. With the
CPU offline, and not receiving IPIs, we may not be able to wake it up to
bring it back online.
The first part of the fix is in icp_opal_set_cpu_priority(). CPPR values
of 0 to 4 inclusive will correctly cause all interrupts to be rejected,
so we pass those CPPR values through to OPAL. However if we are called
with a CPPR of 5 or greater, the caller is expecting to be able to allow
IPIs but not external interrupts. We know this doesn't work, so instead
of rejecting all interrupts we choose the opposite which is to allow all
interrupts. This is still not correct behaviour, but we know for the
only existing caller (xics_migrate_irqs_away()), that it is the better
option.
The other part of the fix is in xics_migrate_irqs_away(). Instead of
setting priority (CPPR) to 0, and then back to 5 before migrating IRQs,
we migrate the IRQs before setting the priority back to 5. This should
have no effect on an ICP backend with a working set_priority(), and on
icp-opal it means we will keep all interrupts blocked until after we've
finished doing the IRQ migration. Additionally we wait for 5ms after
doing the migration to make sure there are no IRQs in flight.
Fixes:
d74361881f0d ("powerpc/xics: Add ICP OPAL backend")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Tested-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Rewrote comments and change log, change delay to 5ms]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ravi Bangoria [Tue, 14 Feb 2017 09:16:42 +0000 (14:46 +0530)]
powerpc: Emulation support for load/store instructions on LE
commit
e148bd17f48bd17fca2f4f089ec879fa6e47e34c upstream.
emulate_step() uses a number of underlying kernel functions that were
initially not enabled for LE. This has been rectified since. So, fix
emulate_step() for LE for the corresponding instructions.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qi Hou [Fri, 3 Mar 2017 07:57:11 +0000 (15:57 +0800)]
i2c: add missing of_node_put in i2c_mux_del_adapters
commit
2e1e4949f9dfb053122785cd73540bb1e61f768b upstream.
Refcount of of_node is increased with of_node_get() in i2c_mux_add_adapter().
It must be decreased with of_node_put() in i2c_mux_del_adapters().
Signed-off-by: Qi Hou <qi.hou@windriver.com>
Reviewed-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan McDowell [Wed, 15 Feb 2017 20:29:15 +0000 (18:29 -0200)]
dw2102: don't do DMA on stack
commit
606142af57dad981b78707234cfbd15f9f7b7125 upstream.
On Kernel 4.9, WARNINGs about doing DMA on stack are hit at
the dw2102 driver: one in su3000_power_ctrl() and the other in tt_s2_4600_frontend_attach().
Both were due to the use of buffers on the stack as parameters to
dvb_usb_generic_rw() and the resulting attempt to do DMA with them.
The device was non-functional as a result.
So, switch this driver over to use a buffer within the device state
structure, as has been done with other DVB-USB drivers.
Tested with TechnoTrend TT-connect S2-4600.
[mchehab@osg.samsung.com: fixed a warning at su3000_i2c_transfer() that
state var were dereferenced before check 'd']
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Wed, 1 Mar 2017 19:05:54 +0000 (19:05 +0000)]
efi/arm: Fix boot crash with CONFIG_CPUMASK_OFFSTACK=y
commit
d1eb98143c56f24fef125f5bbed49ae0b52fb7d6 upstream.
On ARM and arm64, we use a dedicated mm_struct to map the UEFI
Runtime Services regions, which allows us to map those regions
on demand, and in a way that is guaranteed to be compatible
with incoming kernels across kexec.
As it turns out, we don't fully initialize the mm_struct in the
same way as process mm_structs are initialized on fork(), which
results in the following crash on ARM if CONFIG_CPUMASK_OFFSTACK=y
is enabled:
...
EFI Variables Facility v0.08 2004-May-17
Unable to handle kernel NULL pointer dereference at virtual address
00000000
[...]
Process swapper/0 (pid: 1)
...
__memzero()
check_and_switch_context()
virt_efi_get_next_variable()
efivar_init()
efivars_sysfs_init()
do_one_initcall()
...
This is due to a missing call to mm_init_cpumask(), so add it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1488395154-29786-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Sun, 5 Mar 2017 21:03:22 +0000 (15:03 -0600)]
ucount: Remove the atomicity from ucount->count
commit
040757f738e13caaa9c5078bca79aa97e11dde88 upstream.
Always increment/decrement ucount->count under the ucounts_lock. The
increments are there already and moving the decrements there means the
locking logic of the code is simpler. This simplification in the
locking logic fixes a race between put_ucounts and get_ucounts that
could result in a use-after-free because the count could go zero then
be found by get_ucounts and then be freed by put_ucounts.
A bug presumably this one was found by a combination of syzkaller and
KASAN. JongWhan Kim reported the syzkaller failure and Dmitry Vyukov
spotted the race in the code.
Fixes:
f6b2db1a3e8d ("userns: Make the count of user namespaces per user")
Reported-by: JongHwan Kim <zzoru007@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rik van Riel [Thu, 29 Sep 2016 02:55:54 +0000 (22:55 -0400)]
tracing: Add #undef to fix compile error
commit
bf7165cfa23695c51998231c4efa080fe1d3548d upstream.
There are several trace include files that define TRACE_INCLUDE_FILE.
Include several of them in the same .c file (as I currently have in
some code I am working on), and the compile will blow up with a
"warning: "TRACE_INCLUDE_FILE" redefined #define TRACE_INCLUDE_FILE syscalls"
Every other include file in include/trace/events/ avoids that issue
by having a #undef TRACE_INCLUDE_FILE before the #define; syscalls.h
should have one, too.
Link: http://lkml.kernel.org/r/20160928225554.13bd7ac6@annuminas.surriel.com
Fixes:
b8007ef74222 ("tracing: Separate raw syscall from syscall tracer")
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 16 Jan 2017 13:20:54 +0000 (14:20 +0100)]
cpmac: remove hopeless #warning
commit
d43e6fb4ac4abfe4ef7c102833ed02330ad701e0 upstream.
The #warning was present 10 years ago when the driver first got merged.
As the platform is rather obsolete by now, it seems very unlikely that
the warning will cause anyone to fix the code properly.
kernelci.org reports the warning for every build in the meantime, so
I think it's better to just turn it into a code comment to reduce
noise.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 18 Jan 2017 14:52:53 +0000 (15:52 +0100)]
bcm63xx_enet: avoid uninitialized variable warning
commit
df384d435a5c034c735df3d9ea87a03172c59b56 upstream.
gcc-7 and probably earlier versions get confused by this function
and print a harmless warning:
drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open':
drivers/net/ethernet/broadcom/bcm63xx_enet.c:1130:3: error: 'phydev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This adds an initialization for the 'phydev' variable when it is unused
and changes the check to test for that NULL pointer to make it clear
that we always pass a valid pointer here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 17 Jan 2017 15:18:43 +0000 (16:18 +0100)]
MIPS: ralink: Remove unused rt*_wdt_reset functions
commit
886f9c69fc68f56ddea34d3de51ac1fc2ac8dfbc upstream.
All pointers to these functions were removed, so now they produce
warnings:
arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function]
This removes the functions. If we need them again, the patch can be
reverted later.
Fixes:
f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15044/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 17 Jan 2017 15:18:41 +0000 (16:18 +0100)]
MIPS: ralink: Remove unused timer functions
commit
d92240d12a9c010e0094bbc9280aae4a6be9a2d5 upstream.
The functions were originally used for the module unload path,
but are not referenced any more and just cause warnings:
arch/mips/ralink/timer.c:104:13: error: 'rt_timer_disable' defined but not used [-Werror=unused-function]
arch/mips/ralink/timer.c:74:13: error: 'rt_timer_free' defined but not used [-Werror=unused-function]
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Fixes:
62ee73d284e7 ("MIPS: ralink: Make timer explicitly non-modular")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15041/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Crispin [Tue, 20 Dec 2016 18:12:46 +0000 (19:12 +0100)]
MIPS: ralink: Cosmetic change to prom_init().
commit
9c48568b3692f1a56cbf1935e4eea835e6b185b1 upstream.
Over the years the code has been changed various times leading to
argc/argv being defined in a different function to where we actually
use the variables. Clean this up by moving them to prom_init_cmdline().
Signed-off-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14902/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 3 Feb 2017 09:49:17 +0000 (10:49 +0100)]
mtd: pmcmsp: use kstrndup instead of kmalloc+strncpy
commit
906b268477bc03daaa04f739844c120fe4dbc991 upstream.
kernelci.org reports a warning for this driver, as it copies a local
variable into a 'const char *' string:
drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
Using kstrndup() simplifies the code and avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 11 Jan 2017 14:29:49 +0000 (15:29 +0100)]
MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change
commit
b3f6046186ef45acfeebc5a59c9fb45cefc685e7 upstream.
Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in
kernelci.org:
arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT
This updates the defconfig to have the feature built-in.
Fixes:
1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15000/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 17 Jan 2017 15:18:46 +0000 (16:18 +0100)]
MIPS: ip22: Fix ip28 build for modern gcc
commit
23ca9b522383d3b9b7991d8586db30118992af4a upstream.
kernelci reports a failure of the ip28_defconfig build after upgrading its
gcc version:
arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop.
The problem apparently is that the -mr10k-cache-barrier=store option is now
rejected for CPUs other than r10k. Explicitly including the CPU in the
check fixes this and is safe because both options were introduced in
gcc-4.4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15049/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 11 Jan 2017 14:29:50 +0000 (15:29 +0100)]
MIPS: Update ip27_defconfig for SCSI_DH change
commit
ea58fca1842a5dc410cae4167b01643db971a4e2 upstream.
Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in
kernelci.org:
arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH
This updates the defconfig to have the feature built-in.
Fixes:
086b91d052eb ("scsi_dh: integrate into the core SCSI code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15001/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 3 Feb 2017 16:43:50 +0000 (17:43 +0100)]
MIPS: ip27: Disable qlge driver in defconfig
commit
b617649468390713db1515ea79fc772d2eb897a8 upstream.
One of the last remaining failures in kernelci.org is for a gcc bug:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints:
drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190
This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot
reproduce the problem here. However, it is clear that ip27_defconfig
does not actually need this driver as the platform has only PCI-X but
not PCIe, and the qlge adapter in turn is PCIe-only.
The driver was originally enabled in 2010 along with lots of other
drivers.
Fixes:
59d302b342e5 ("MIPS: IP27: Make defconfig useful again.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15197/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 17 Jan 2017 15:18:36 +0000 (16:18 +0100)]
MIPS: VDSO: avoid duplicate CAC_BASE definition
commit
1742ac265046f34223e06d5d283496f0291be259 upstream.
vdso.h includes <spaces.h> implicitly after defining CONFIG_32BITS.
This defeats the override in mach-ip27/spaces.h, leading to
a build error that shows up in kernelci.org:
In file included from arch/mips/include/asm/mach-ip27/spaces.h:29:0,
from arch/mips/include/asm/page.h:12,
from arch/mips/vdso/vdso.h:26,
from arch/mips/vdso/gettimeofday.c:11:
arch/mips/include/asm/mach-generic/spaces.h:28:0: error: "CAC_BASE" redefined [-Werror]
#define CAC_BASE _AC(0x80000000, UL)
An earlier patch tried to make the second definition conditional,
but that patch had the #ifdef in the wrong place, and would lead
to another warning:
arch/mips/include/asm/io.h: In function 'phys_to_virt':
arch/mips/include/asm/io.h:138:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
For all I can tell, there is no other reason than vdso32 to ever
include this file with CONFIG_32BITS set, and the vdso itself should
never refer to the base addresses as it is running in user space,
so adding an #ifdef here is safe.
Link: https://patchwork.kernel.org/patch/9418187/
Fixes:
3ffc17d8768b ("MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15039/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 11 Jan 2017 14:29:48 +0000 (15:29 +0100)]
MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change
commit
9ddc16ad8e0bc7742fc96d5aaabc5b8698512cd1 upstream.
In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool
symbols instead of tristate, and kernelci.org reports a bunch of
warnings for this, like:
arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
This changes all the MIPS defconfigs with these symbols to have them
built-in.
Fixes:
9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite")
Fixes:
c51d39010a1b ("netfilter: conntrack: built-in support for DCCP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14999/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 3 Feb 2017 22:33:23 +0000 (23:33 +0100)]
crypto: improve gcc optimization flags for serpent and wp512
commit
7d6e9105026788c497f0ab32fa16c82f4ab5ff61 upstream.
An ancient gcc bug (first reported in 2003) has apparently resurfaced
on MIPS, where kernelci.org reports an overly large stack frame in the
whirlpool hash algorithm:
crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=]
With some testing in different configurations, I'm seeing large
variations in stack frames size up to 1500 bytes for what should have
around 300 bytes at most. I also checked the reference implementation,
which is essentially the same code but also comes with some test and
benchmarking infrastructure.
It seems that recent compiler versions on at least arm, arm64 and powerpc
have a partial fix for this problem, but enabling "-fsched-pressure", but
even with that fix they suffer from the issue to a certain degree. Some
testing on arm64 shows that the time needed to hash a given amount of
data is roughly proportional to the stack frame size here, which makes
sense given that the wp512 implementation is doing lots of loads for
table lookups, and the problem with the overly large stack is a result
of doing a lot more loads and stores for spilled registers (as seen from
inspecting the object code).
Disabling -fschedule-insns consistently fixes the problem for wp512,
in my collection of cross-compilers, the results are consistently better
or identical when comparing the stack sizes in this function, though
some architectures (notable x86) have schedule-insns disabled by
default.
The four columns are:
default: -O2
press: -O2 -fsched-pressure
nopress: -O2 -fschedule-insns -fno-sched-pressure
nosched: -O2 -no-schedule-insns (disables sched-pressure)
default press nopress nosched
alpha-linux-gcc-4.9.3 1136 848 1136 176
am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104
arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352
cris-linux-gcc-4.9.3 272 272 272 272
frv-linux-gcc-4.9.3 1128 1000 1128 280
hppa64-linux-gcc-4.9.3 1128 336 1128 184
hppa-linux-gcc-4.9.3 644 308 644 276
i386-linux-gcc-4.9.3 352 352 352 352
m32r-linux-gcc-4.9.3 720 656 720 268
microblaze-linux-gcc-4.9.3 1108 604 1108 256
mips64-linux-gcc-4.9.3 1328 592 1328 208
mips-linux-gcc-4.9.3 1096 624 1096 240
powerpc64-linux-gcc-4.9.3 1088 432 1088 160
powerpc-linux-gcc-4.9.3 1080 584 1080 224
s390-linux-gcc-4.9.3 456 456 624 360
sh3-linux-gcc-4.9.3 292 292 292 292
sparc64-linux-gcc-4.9.3 992 240 992 208
sparc-linux-gcc-4.9.3 680 592 680 312
x86_64-linux-gcc-4.9.3 224 240 272 224
xtensa-linux-gcc-4.9.3 1152 704 1152 304
aarch64-linux-gcc-7.0.0 224 224 1104 208
arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352
mips-linux-gcc-7.0.0 1120 648 1120 272
x86_64-linux-gcc-7.0.1 240 240 304 240
arm-linux-gnueabi-gcc-4.4.7 840 392
arm-linux-gnueabi-gcc-4.5.4 784 728 784 320
arm-linux-gnueabi-gcc-4.6.4 736 728 736 304
arm-linux-gnueabi-gcc-4.7.4 944 784 944 352
arm-linux-gnueabi-gcc-4.8.5 464 464 760 352
arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352
arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336
arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344
arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352
Trying the same test for serpent-generic, the picture is a bit different,
and while -fno-schedule-insns is generally better here than the default,
-fsched-pressure wins overall, so I picked that instead.
default press nopress nosched
alpha-linux-gcc-4.9.3 1392 864 1392 960
am33_2.0-linux-gcc-4.9.3 536 524 536 528
arm-linux-gnueabi-gcc-4.9.3 552 552 776 536
cris-linux-gcc-4.9.3 528 528 528 528
frv-linux-gcc-4.9.3 536 400 536 504
hppa64-linux-gcc-4.9.3 524 208 524 480
hppa-linux-gcc-4.9.3 768 472 768 508
i386-linux-gcc-4.9.3 564 564 564 564
m32r-linux-gcc-4.9.3 712 576 712 532
microblaze-linux-gcc-4.9.3 724 392 724 512
mips64-linux-gcc-4.9.3 720 384 720 496
mips-linux-gcc-4.9.3 728 384 728 496
powerpc64-linux-gcc-4.9.3 704 304 704 480
powerpc-linux-gcc-4.9.3 704 296 704 480
s390-linux-gcc-4.9.3 560 560 592 536
sh3-linux-gcc-4.9.3 540 540 540 540
sparc64-linux-gcc-4.9.3 544 352 544 496
sparc-linux-gcc-4.9.3 544 344 544 496
x86_64-linux-gcc-4.9.3 528 536 576 528
xtensa-linux-gcc-4.9.3 752 544 752 544
aarch64-linux-gcc-7.0.0 432 432 656 480
arm-linux-gnueabi-gcc-7.0.1 616 616 808 536
mips-linux-gcc-7.0.0 720 464 720 488
x86_64-linux-gcc-7.0.1 536 528 600 536
arm-linux-gnueabi-gcc-4.4.7 592 440
arm-linux-gnueabi-gcc-4.5.4 776 448 776 544
arm-linux-gnueabi-gcc-4.6.4 776 448 776 544
arm-linux-gnueabi-gcc-4.7.4 768 448 768 544
arm-linux-gnueabi-gcc-4.8.5 488 488 776 544
arm-linux-gnueabi-gcc-4.9.3 552 552 776 536
arm-linux-gnueabi-gcc-5.3.1 552 552 776 536
arm-linux-gnueabi-gcc-6.1.1 560 560 776 536
arm-linux-gnueabi-gcc-7.0.1 616 616 808 536
I did not do any runtime tests with serpent, so it is possible that stack
frame size does not directly correlate with runtime performance here and
it actually makes things worse, but it's more likely to help here, and
the reduced stack frame size is probably enough reason to apply the patch,
especially given that the crypto code is often used in deep call chains.
Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/
Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 24 Feb 2017 18:11:28 +0000 (19:11 +0100)]
USB: serial: digi_acceleport: fix OOB-event processing
commit
2e46565cf622dd0534a9d8bffe152a577b48d7aa upstream.
A recent change claimed to fix an off-by-one error in the OOB-port
completion handler, but instead introduced such an error. This could
specifically led to modem-status changes going unnoticed, effectively
breaking TIOCMGET.
Note that the offending commit fixes a loop-condition underflow and is
marked for stable, but should not be backported without this fix.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes:
2d380889215f ("USB: serial: digi_acceleport: fix OOB data sanity
check")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 31 Jan 2017 16:17:27 +0000 (17:17 +0100)]
USB: serial: digi_acceleport: fix OOB data sanity check
commit
2d380889215fe20b8523345649dee0579821800c upstream.
Make sure to check for short transfers to avoid underflow in a loop
condition when parsing the receive buffer.
Also fix an off-by-one error in the incomplete sanity check which could
lead to invalid data being parsed.
Fixes:
8c209e6782ca ("USB: make actual_length in struct urb field u32")
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 15 Mar 2017 02:03:13 +0000 (10:03 +0800)]
Linux 4.9.15
K. Y. Srinivasan [Thu, 9 Feb 2017 01:30:56 +0000 (18:30 -0700)]
drivers: hv: Turn off write permission on the hypercall page
commit
372b1e91343e657a7cc5e2e2bcecd5140ac28119 upstream.
The hypercall page only needs to be executable but currently it is setup to
be writable as well. Fix the issue.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OGAWA Hirofumi [Fri, 10 Mar 2017 00:17:37 +0000 (16:17 -0800)]
fat: fix using uninitialized fields of fat_inode/fsinfo_inode
commit
c0d0e351285161a515396b7b1ee53ec9ffd97e3c upstream.
Recently fallocate patch was merged and it uses
MSDOS_I(inode)->mmu_private at fat_evict_inode(). However,
fat_inode/fsinfo_inode that was introduced in past didn't initialize
MSDOS_I(inode) properly.
With those combinations, it became the cause of accessing random entry
in FAT area.
Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Moreno Bartalucci <moreno.bartalucci@tecnorama.it>
Tested-by: Moreno Bartalucci <moreno.bartalucci@tecnorama.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tahsin Erdogan [Fri, 10 Mar 2017 00:17:26 +0000 (16:17 -0800)]
mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()
commit
40e952f9d687928b32db20226f085ae660a7237c upstream.
mem_cgroup_free() indirectly calls wb_domain_exit() which is not
prepared to deal with a struct wb_domain object that hasn't executed
wb_domain_init(). For instance, the following warning message is
printed by lockdep if alloc_percpu() fails in mem_cgroup_alloc():
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1950 Comm: mkdir Not tainted 4.10.0+ #151
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x67/0x99
register_lock_class+0x36d/0x540
__lock_acquire+0x7f/0x1a30
lock_acquire+0xcc/0x200
del_timer_sync+0x3c/0xc0
wb_domain_exit+0x14/0x20
mem_cgroup_free+0x14/0x40
mem_cgroup_css_alloc+0x3f9/0x620
cgroup_apply_control_enable+0x190/0x390
cgroup_mkdir+0x290/0x3d0
kernfs_iop_mkdir+0x58/0x80
vfs_mkdir+0x10e/0x1a0
SyS_mkdirat+0xa8/0xd0
SyS_mkdir+0x14/0x20
entry_SYSCALL_64_fastpath+0x18/0xad
Add __mem_cgroup_free() which skips wb_domain_exit(). This is used by
both mem_cgroup_free() and mem_cgroup_alloc() clean up.
Fixes:
0b8f73e104285 ("mm: memcontrol: clean up alloc, online, offline, free functions")
Link: http://lkml.kernel.org/r/20170306192122.24262-1-tahsin@google.com
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kirill A. Shutemov [Fri, 10 Mar 2017 00:17:23 +0000 (16:17 -0800)]
thp: fix another corner case of munlock() vs. THPs
commit
6ebb4a1b848fe75323135f93e72c78f8780fd268 upstream.
The following test case triggers BUG() in munlock_vma_pages_range():
int main(int argc, char *argv[])
{
int fd;
system("mount -t tmpfs -o huge=always none /mnt");
fd = open("/mnt/test", O_CREAT | O_RDWR);
ftruncate(fd, 4UL << 20);
mmap(NULL, 4UL << 20, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_FIXED | MAP_LOCKED, fd, 0);
mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_LOCKED, fd, 0);
munlockall();
return 0;
}
The second mmap() create PTE-mapping of the first huge page in file. It
makes kernel munlock the page as we never keep PTE-mapped page mlocked.
On munlockall() when we handle vma created by the first mmap(),
munlock_vma_page() returns page_mask == 0, as the page is not mlocked
anymore. On next iteration follow_page_mask() return tail page, but
page_mask is HPAGE_NR_PAGES - 1. It makes us skip to the first tail
page of the next huge page and step on
VM_BUG_ON_PAGE(PageMlocked(page)).
The fix is not use the page_mask from follow_page_mask() at all. It has
no use for us.
Link: http://lkml.kernel.org/r/20170302150252.34120-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Sat, 11 Mar 2017 00:31:19 +0000 (01:31 +0100)]
x86/tlb: Fix tlb flushing when lguest clears PGE
commit
2c4ea6e28dbf15ab93632c5c189f3948366b8885 upstream.
Fengguang reported random corruptions from various locations on x86-32
after commits
d2852a224050 ("arch: add ARCH_HAS_SET_MEMORY config") and
9d876e79df6a ("bpf: fix unlocking of jited image when module ronx not set")
that uses the former. While x86-32 doesn't have a JIT like x86_64, the
bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to
ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module
support built in and therefore never had the DEBUG_SET_MODULE_RONX setting
enabled.
After investigating the crashes further, it turned out that using
set_memory_ro() and set_memory_rw() didn't have the desired effect, for
example, setting the pages as read-only on x86-32 would still let
probe_kernel_write() succeed without error. This behavior would manifest
itself in situations where the vmalloc'ed buffer was accessed prior to
set_memory_*() such as in case of bpf_prog_alloc(). In cases where it
wasn't, the page attribute changes seemed to have taken effect, leading to
the conclusion that a TLB invalidate didn't happen. Moreover, it turned out
that this issue reproduced with qemu in "-cpu kvm64" mode, but not for
"-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger
a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(),
though.
There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends
on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush
(depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in
my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu
kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually
worked fine, and further investigating the cr4 one turned out that
X86_CR4_PGE bit was not set in cr4 register, meaning the
__native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same
value instead of clearing X86_CR4_PGE in the first write to trigger the
flush.
It turned out that X86_CR4_PGE was cleared from cr4 during init from
lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also
cleared from there due to concerns of using PGE in guest kernel that can
lead to hard to trace bugs (see
bff672e630a0 ("lguest: documentation V:
Host") in init()). The CPU feature bits are cleared in dynamic
boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses
static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB
flushing to use, meaning they still used the old setting of the host
kernel.
Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate
to static_cpu_has() checks is too late at this point as sections have been
patched already, so for now, it seems reasonable to switch back to
boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit
c109bf95992b
("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via
cr3 as originally intended, properly makes the new page attributes visible
and thus fixes the crashes seen by Fengguang.
Fixes:
c109bf95992b ("x86/cpufeature: Remove cpu_has_pge")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: bp@suse.de
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: lkp@01.org
Cc: Laura Abbott <labbott@redhat.com>
Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com
Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Fri, 10 Mar 2017 00:16:42 +0000 (16:16 -0800)]
x86, mm: fix gup_pte_range() vs DAX mappings
commit
ef947b2529f918d9606533eb9c32b187ed6a5ede upstream.
gup_pte_range() fails to check pte_allows_gup() before translating a DAX
pte entry, pte_devmap(), to a page. This allows writes to read-only
mappings, and bypasses the DAX cacheline dirty tracking due to missed
'mkwrite' faults. The gup_huge_pmd() path and the gup_huge_pud() path
correctly check pte_allows_gup() before checking for _devmap() entries.
Fixes:
3565fce3a659 ("mm, x86: get_user_pages() for dax mappings")
Link: http://lkml.kernel.org/r/148804251312.36605.12665024794196605053.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Xiong Zhou <xzhou@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 16 Jan 2017 11:06:09 +0000 (12:06 +0100)]
libceph: use BUG() instead of BUG_ON(1)
commit
d24cdcd3e40a6825135498e11c20c7976b9bf545 upstream.
I ran into this compile warning, which is the result of BUG_ON(1)
not always leading to the compiler treating the code path as
unreachable:
include/linux/ceph/osdmap.h: In function 'ceph_can_shift_osds':
include/linux/ceph/osdmap.h:62:1: error: control reaches end of non-void function [-Werror=return-type]
Using BUG() here avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 14 Feb 2017 16:12:38 +0000 (18:12 +0200)]
drm/i915: Fix not finding the VBT when it overlaps with OPREGION_ASLE_EXT
commit
998d75730b40afc218c059d811869abe9676b305 upstream.
If there is no OPREGION_ASLE_EXT then a VBT stored in mailbox #4 may
use the ASLE_EXT parts of the opregion. Adjust the vbt_size calculation
for a vbt in mailbox #4 for this.
This fixes the driver not finding the VBT on a jumper ezpad mini3
cherrytrail tablet and on a ACER SW5_017 machine.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487088758-30050-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit
dfb65e71ea2c1d97ac373cc0587dc60b3307581a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Wed, 8 Feb 2017 17:52:54 +0000 (19:52 +0200)]
drm/i915: Avoid spurious WARNs about the wrong pipe in the PPS code
commit
aa9323dd49b23932a09023012f050556de64f118 upstream.
Until recently vlv_steal_power_sequencer() wasn't being called for
normal DP ports, and hence it could assert that it should only be
called for pipe A and B (since pipe C doesn't support eDP). However
that changed when we started to consider normal DP ports as well when
choosing a PPS. So we will now get spurious warnings when
vlv_steal_power_sequencer() does get called for pipe C. Avoid this by
moving the WARN down into vlv_detach_power_sequencer() where this
assertion should still hold.
Cc: Imre Deak <imre.deak@intel.com>
Fixes:
9f2bdb006a7e ("drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95287
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208175254.10958-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit
d158694f452252d0fef335a775aeb3eb74fe7af0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Tue, 7 Feb 2017 12:49:56 +0000 (12:49 +0000)]
drm: Cancel drm_fb_helper_resume_work on unload
commit
24f76b2c87ed68f79f9f0705b11ccbefaaa0d390 upstream.
We can not allow the worker to run after its fbdev, or even the module,
has been removed.
Fixes:
cfe63423d9be ("drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207124956.14954-2-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Tue, 7 Feb 2017 12:49:55 +0000 (12:49 +0000)]
drm: Cancel drm_fb_helper_dirty_work on unload
commit
f21b9a92ca7c29382909eaab9facc2cf46f2cc0b upstream.
We can not allow the worker to run after its fbdev, or even the module,
has been removed.
Fixes:
eaa434defaca ("drm/fb-helper: Add fb_deferred_io support")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207124956.14954-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Wed, 9 Nov 2016 10:39:05 +0000 (10:39 +0000)]
drm/i915/gvt: Disable access to stolen memory as a guest
commit
ddd09373628adcbdc3f7b9098d22328834f8d772 upstream.
Explicitly disable stolen memory when running as a guest in a virtual
machine, since the memory is not mediated between clients and reserved
entirely for the host. The actual size should be reported as zero, but
like every other quirk we want to tell the user what is happening.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99028
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161109103905.17860-1-chris@chris-wilson.co.uk
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit
04a68a35ce6d7b54749989f943993020f48fed62)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 7 Feb 2017 23:46:01 +0000 (02:46 +0300)]
drm/atomic: fix an error code in mode_fixup()
commit
f9ad86e42d0303eeb8e0d41bb208153022ebd9d2 upstream.
Having "ret" be a bool type works for everything except
ret = funcs->atomic_check(). The other functions all return zero on
error but ->atomic_check() returns negative error codes. We want to
propagate the error code but instead we return 1.
I found this bug with static analysis and I don't know if it affects
run time.
Fixes:
4cd4df8080a3 ("drm/atomic: Add ->atomic_check() to encoder helpers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207234601.GA23981@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Wed, 8 Feb 2017 12:47:49 +0000 (10:47 -0200)]
drm/imx: imx-tve: Do not set the regulator voltage
commit
fc12bccda8b6f5c38139eceec9e369ed78091b2b upstream.
Commit
deb65870b5d9d ("drm/imx: imx-tve: check the value returned by
regulator_set_voltage()") exposes the following probe issue:
63ff0000.tve supply dac not found, using dummy regulator
imx-drm display-subsystem: failed to bind
63ff0000.tve (ops imx_tve_ops): -22
When the 'dac-supply' is not passed in the device tree a dummy regulator is
used and setting its voltage is not allowed.
To fix this issue, do not set the dac-supply voltage inside the driver
and let its voltage be specified in the device tree.
Print a warning if the the 'dac-supply' voltage has a value different
from 2.75V.
Fixes:
deb65870b5d9d ("drm/imx: imx-tve: check the value returned by regulator_set_voltage()")
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nandor Han [Tue, 11 Oct 2016 11:13:41 +0000 (14:13 +0300)]
dmaengine: imx-sdma - correct the dma transfer residue calculation
commit
85f57752b33cf12f1d583f0c10b752292de00abe upstream.
The residue calculation was taking in consideration that dma
transaction status will be always retrieved in the dma callback
used to inform that dma transfer is complete. However this is not
the case for all subsystems that use dma. Some subsystems use a
timer to check the dma status periodically.
Therefore the calculation was updated and residue is calculated
accordingly by a) update the residue calculation taking in
consideration the last used buffer index by using *buf_ptail* variable
and b) chn_real_count (number of bytes transferred) is initialized to
zero, when dma channel is created, to avoid using an uninitialized
value in residue calculation when dma status is checked without
waiting dma complete event.
Signed-off-by: Nandor Han <nandor.han@ge.com>
Acked-by: Peter Senna Tschudin <peter.senna@collabora.com>
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Hellstrom [Tue, 21 Feb 2017 10:42:27 +0000 (17:42 +0700)]
drm/vmwgfx: Work around drm removal of control nodes
commit
31788ca803a0c89078f9e604e64286fbd9077926 upstream.
vmware tools has a daemon that gets layout information from the GUI and
forwards it to DRM so that the modesetting code can set preferred connector
locations and modes. This daemon was using control nodes but since control
nodes were just removed, make it possible for the daemon to use render- or
primary nodes instead. This is a bit ugly but will allow drm to proceed with
removal of the mostly unused control-node code and allow vmware to proceed
with fixing up automatic layout settings for gnome-shell/wayland.
We bump minor to inform user-space about the api change.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170221104227.2854-1-thellstrom@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michel Dänzer [Wed, 25 Jan 2017 08:21:31 +0000 (17:21 +0900)]
drm/ttm: Make sure BOs being swapped out are cacheable
commit
239ac65fa5ffab71adf66e642750f940e7241d99 upstream.
The current caching state may not be tt_cached, even though the
placement contains TTM_PL_FLAG_CACHED, because placement can contain
multiple caching flags. Trying to swap out such a BO would trip up the
BUG_ON(ttm->caching_state != tt_cached);
in ttm_tt_swapout.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomeu Vizoso [Mon, 20 Feb 2017 15:25:45 +0000 (16:25 +0100)]
drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058
commit
36fc579761b50784b63dafd0f2e796b659e0f5ee upstream.
Rotel RSX-1058 is a receiver with 4 HDMI inputs and a HDMI output, all
1.1.
When a sink that supports deep color is connected to the output, the
receiver will send EDIDs that advertise this capability, even if it
isn't possible with HDMI versions earlier than 1.3.
Currently the kernel is assuming that deep color is possible and the
sink displays an error.
This quirk will make sure that deep color isn't used with this
particular receiver.
Fixes:
7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220152545.13153-1-tomeu.vizoso@collabora.com
Cc: Matt Horan <matt@matthoran.com>
Tested-by: Matt Horan <matt@matthoran.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99869
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Y.C. Chen [Thu, 23 Feb 2017 07:52:33 +0000 (15:52 +0800)]
drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS
commit
3856081eede297b617560b85e948cfb00bb395ec upstream.
The current POST code for the AST2300/2400 family doesn't work properly
if the chip hasn't been initialized previously by either the BMC own FW
or the VBIOS. This fixes it.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Y.C. Chen <yc_chen@aspeedtech.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Y.C. Chen [Wed, 22 Feb 2017 04:14:19 +0000 (15:14 +1100)]
drm/ast: Call open_key before enable_mmio in POST code
commit
9bb92f51558f2ef5f56c257bdcea0588f31d857e upstream.
open_key enables access the registers used by enable_mmio
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Tested-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Y.C. Chen [Wed, 22 Feb 2017 04:10:50 +0000 (15:10 +1100)]
drm/ast: Fix test for VGA enabled
commit
905f21a49d388de3e99438235f3301cabf0c0ef4 upstream.
The test to see if VGA was already enabled is doing an unnecessary
second test from a register that may or may not have been initialized
to a valid value. Remove it.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Tested-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Fri, 10 Feb 2017 05:00:52 +0000 (00:00 -0500)]
drm/amdgpu: add more cases to DCE11 possible crtc mask setup
commit
4ce3bd45b351633f2a0512c587f7fcba2ce044e8 upstream.
Add cases for asics with 3 and 5 crtcs. Fixes an artificial
limitation on asics with 3 or 5 crtcs.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=99744
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Mon, 27 Feb 2017 08:38:11 +0000 (09:38 +0100)]
mac80211: use driver-indicated transmitter STA only for data frames
commit
19d19e960598161be92a7e4828eb7706c6410ce6 upstream.
When I originally introduced using the driver-indicated station as an
optimisation to avoid the hashtable lookup/iteration, of course it
wasn't intended to really functionally change anything.
I neglected, however, to take into account VLAN interfaces, which have
the property that management and data frames are handled differently:
data frames go directly to the station and the VLAN while management
frames continue to be processed over the underlying/associated AP-type
interface. As a consequence, when a driver used this optimisation for
management frames and the user enabled VLANs, my change broke things
since any management frames, particularly disassoc/deauth, were missed
by hostapd.
Fix this by restoring the original code path for non-data frames, they
aren't critical for performance to begin with.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194713.
Big thanks goes to Jarek who bisected the issue and provided a very
detailed bug report, including the crucial information that he was
using VLANs in his configuration.
Fixes:
771e846bea9e ("mac80211: allow passing transmitter station on RX")
Reported-and-tested-by: Jarek Kamiński <jarek@freeside.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Wed, 22 Feb 2017 15:16:07 +0000 (16:16 +0100)]
mac80211: don't handle filtered frames within a BA session
commit
890030d3c425f49abaa4acf60e20f288b599f980 upstream.
When running a BA session, the driver (or the hardware) already takes
care of retransmitting failed frames, since it has to keep the receiver
reorder window in sync.
Adding another layer of retransmit around that does not improve
anything. In fact, it can only lead to some strong reordering with huge
latency.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sara Sharon [Mon, 6 Feb 2017 13:28:42 +0000 (15:28 +0200)]
mac80211: don't reorder frames with SN smaller than SSN
commit
b7540d8f25c8034de7e4163fc23ac457bf057731 upstream.
When RX aggregation starts, transmitter may continue send frames
with SN smaller than SSN until the AddBA response is received.
However, the reorder buffer is already initialized at this point,
which will cause the drop of such frames as duplicates since the
head SN of the reorder buffer is set to the SSN, which is bigger.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Chen [Sat, 21 Jan 2017 18:16:58 +0000 (02:16 +0800)]
mac80211: flush delayed work when entering suspend
commit
a9e9200d8661c1a0be8c39f93deb383dc940de35 upstream.
The issue was found when entering suspend and resume.
It triggers a warning in:
mac80211/key.c: ieee80211_enable_keys()
...
WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt ||
sdata->crypto_tx_tailroom_pending_dec);
...
It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully
in a delayed_work during suspend. Add a flush_delayed_work to fix it.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>