Gal Pressman [Tue, 12 May 2020 15:22:03 +0000 (18:22 +0300)]
RDMA/efa: Fix setting of wrong bit in get/set_feature commands
When using a control buffer the ctrl_data bit should be set in order to
indicate the control buffer address is valid, not ctrl_data_indirect
which is used when the control buffer itself is indirect.
Fixes:
e9c6c5373088 ("RDMA/efa: Add common command handlers")
Link: https://lore.kernel.org/r/20200512152204.93091-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Aharon Landau [Wed, 13 May 2020 09:55:50 +0000 (12:55 +0300)]
RDMA/mlx5: Add init2init as a modify command
Missing INIT2INIT entry in the list of modify commands caused DEVX
applications to be unable to modify_qp for this transition state. Add the
MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.
Fixes:
e662e14d801b ("IB/mlx5: Add DEVX support for modify and query commands")
Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lijun Ou [Fri, 8 May 2020 09:45:59 +0000 (17:45 +0800)]
RDMA/hns: Reserve one sge in order to avoid local length error
When rq/srq sge length is smaller than sq sge length, it will produce a
local length error and may cause the bus to hang. Therefore, for rq wqe
and srq wqe, one reserved sge pointing to a reserved mr is used to avoid
this error.
Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Xi Wang [Fri, 8 May 2020 09:45:58 +0000 (17:45 +0800)]
RDMA/hns: Rename macro for defining hns hardware page size
Rename the PAGE_ADDR_SHIFT as HNS_HW_PAGE_SHIFT to make code more
readable.
Link: https://lore.kernel.org/r/1588931159-56875-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Weihang Li [Fri, 8 May 2020 09:45:57 +0000 (17:45 +0800)]
RDMA/hns: Remove redundant memcpy()
srq_context is a local variables and is only used to get some fields from
buffer of mailbox. It's meaningless to copy mailbox's buffer's contents
back to it.
Link: https://lore.kernel.org/r/1588931159-56875-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lang Cheng [Fri, 8 May 2020 09:45:56 +0000 (17:45 +0800)]
RDMA/hns: Store mr len information into mr obj
The length information should be stored in the struct ib_mr object,
otherwise the length value of a valid mr object would always be 0.
Link: https://lore.kernel.org/r/1588931159-56875-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Weihang Li [Fri, 8 May 2020 09:45:55 +0000 (17:45 +0800)]
RDMA/hns: Fix error with to_hr_hem_entries_count()
For ilog2(x), if x is 0 and not a constant variable, it will return
-1. And there will be an error as below:
hns3 0000:7d:00.0 hns_0: Local work queue 0x8 catast error, sub_event type is: 2
So modify to_hr_hem_entries_shift() to return 0 if conut is 0.
Fixes:
54d6638765b0 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1588931159-56875-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Weihang Li [Fri, 8 May 2020 09:45:54 +0000 (17:45 +0800)]
RDMA/hns: Fix wrong assignment of SRQ's max_wr
srq's attribute max_wr should be 1 less than the total count of wqe.
Fixes:
ffb1308b88b6 ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1588931159-56875-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wenpeng Liang [Fri, 8 May 2020 09:45:53 +0000 (17:45 +0800)]
RDMA/hns: Fix assignment to ba_pg_sz of eqe
When allocating eq buffer, the size of base address page should be defined
by eqe_ba_pg_sz instead of srqwqe_ba_pg_sz.
Fixes:
477a0a387072 ("RDMA/hns: Optimize 0 hop addressing for EQE buffer")
Link: https://lore.kernel.org/r/1588931159-56875-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lang Cheng [Fri, 8 May 2020 09:45:52 +0000 (17:45 +0800)]
RDMA/hns: Fix cmdq parameter of querying pf timer resource
The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).
Fixes:
0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lijun Ou [Fri, 8 May 2020 09:45:51 +0000 (17:45 +0800)]
RDMA/hns: Bugfix for querying qkey
The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.
Fixes:
926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gustavo A. R. Silva [Tue, 19 May 2020 23:30:18 +0000 (18:30 -0500)]
RDMA/siw: Replace one-element array and use struct_size() helper
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct siw_pbl.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200519233018.GA6105@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Danil Kipnis [Tue, 19 May 2020 11:14:19 +0000 (13:14 +0200)]
rnbd/rtrs: Pass max segment size from blk user to the rdma library
When Block Device Layer is disabled, BLK_MAX_SEGMENT_SIZE is undefined.
The rtrs is a transport library and should compile independently of the
block layer. The desired max segment size should be passed down by the
user.
Introduce max_segment_size parameter for the rtrs_clt_open() call.
Fixes:
f7a7a5c228d4 ("block/rnbd: client: main functionality")
Fixes:
6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Fixes:
cb80329c9434 ("RDMA/rtrs: client: private header with client structs and functions")
Fixes:
b5c27cdb094e ("RDMA/rtrs: public interface header to establish RDMA connections")
Link: https://lore.kernel.org/r/20200519111419.924170-1-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wei Yongjun [Tue, 19 May 2020 09:19:12 +0000 (09:19 +0000)]
RDMA/rtrs: server: Fix some error return code
Fix to return negative error code -ENOMEM from the some error handling
cases instead of 0, as done elsewhere in this function.
Fixes:
9cb837480424 ("RDMA/rtrs: server: main functionality")
Fixes:
91b11610af8d ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20200519091912.134358-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gustavo A. R. Silva [Tue, 19 May 2020 16:36:12 +0000 (11:36 -0500)]
RDMA/rtrs: client: Fix function return on success
Remove the if-statement and return the value contained in _err_,
unconditionally.
Link: https://lore.kernel.org/r/20200519163612.GA6043@embeddedor
Addresses-Coverity-ID: 1493753 ("Identical code for different branches")
Fixes:
6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Dan Carpenter [Tue, 19 May 2020 15:45:25 +0000 (18:45 +0300)]
RDMA/rtrs: Fix a couple off by one bugs in rtrs_srv_rdma_done()
These > comparisons should be >= to prevent accessing one element beyond
the end of the buffer.
Fixes:
9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200519154525.GA66801@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Dan Carpenter [Tue, 19 May 2020 13:32:23 +0000 (16:32 +0300)]
RDMA/rtrs: Fix some signedness bugs in error handling
The problem is that "req->sg_cnt" is an unsigned int so if "nr" is
negative, it gets type promoted to a high positive value and the condition
is false. This patch fixes it by handling negatives separately.
Fixes:
6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200519133223.GN2078@kadam
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kamal Heib [Thu, 14 May 2020 11:47:20 +0000 (14:47 +0300)]
RDMA/srpt: Fix disabling device management
Avoid disabling device management for devices that don't support
Management datagrams (MADs) by checking if the "mad_agent" pointer is
initialized before calling ib_modify_port, also fix the error flow in
srpt_refresh_port() to disable device management if
ib_register_mad_agent() fail.
Fixes:
09f8a1486dca ("RDMA/srpt: Fix handling of SR-IOV and iWARP ports")
Link: https://lore.kernel.org/r/20200514114720.141139-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Shay Drory [Wed, 13 May 2020 09:53:04 +0000 (12:53 +0300)]
RDMA/mlx5: Update mlx5_ib driver name
Current description doesn't include new devices, change it by updating to
have more generic description and remove DRIVER_NAME and DRIVER_VERSION
defines.
Link: https://lore.kernel.org/r/20200513095304.210240-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Xiongfeng Wang [Mon, 11 May 2020 07:37:09 +0000 (15:37 +0800)]
RDMA/srpt: Add a newline when printing parameter 'srpt_service_guid' by sysfs
When I cat module parameter 'srpt_service_guid', it displays as follows.
It is better to add a newline for easy reading.
[root@hulk-202 ~]# cat /sys/module/ib_srpt/parameters/srpt_service_guid
0x0205cdfffe8346b9[root@hulk-202 ~]#
Link: https://lore.kernel.org/r/1589182629-27743-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 08:24:39 +0000 (11:24 +0300)]
RDMA/core: Consolidate ib_create_srq flows
The uverbs layer largely duplicate the code in ib_create_srq(), with the
slight difference that it passes in a udata. Move all the code together
into ib_create_srq_user() and provide an inline for kernel users, similar
to other create calls.
Link: https://lore.kernel.org/r/20200506082444.14502-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas [Wed, 6 May 2020 08:24:42 +0000 (11:24 +0300)]
RDMA/uverbs: Fix create WQ to use the given user handle
Fix create WQ to use the given user handle, in addition dropped some
duplicated code from this flow.
Fixes:
fd3c7904db6e ("IB/core: Change idr objects to use the new schema")
Fixes:
f213c0527210 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/20200506082444.14502-9-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas [Wed, 6 May 2020 08:24:38 +0000 (11:24 +0300)]
RDMA/uverbs: Cleanup wq/srq context usage from uverbs layer
Both wq_context and srq_context are some leftover from the past in uverbs
layer, they are not really in use, drop them.
Link: https://lore.kernel.org/r/20200506082444.14502-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:31 +0000 (15:51 +0200)]
MAINTAINERS: Add maintainers for RNBD/RTRS modules
Danil and I will maintain RNBD/RTRS modules.
Link: https://lore.kernel.org/r/20200511135131.27580-26-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:30 +0000 (15:51 +0200)]
block/rnbd: a bit of documentation
README with description of major sysfs entries, sysfs documentation
are moved to ABI dir as Bart suggested.
Link: https://lore.kernel.org/r/20200511135131.27580-25-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:29 +0000 (15:51 +0200)]
block/rnbd: include client and server modules into kernel compilation
Add rnbd Makefile, Kconfig and also corresponding lines into upper block
layer files.
Link: https://lore.kernel.org/r/20200511135131.27580-24-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:28 +0000 (15:51 +0200)]
block/rnbd: server: sysfs interface functions
This is the sysfs interface to rnbd mapped devices on server side:
/sys/class/rnbd-server/ctl/devices/<device_name>/
|- block_dev
| *** link pointing to the corresponding block device sysfs entry
|
|- sessions/<session-name>/
| *** sessions directory
|
|- read_only
| *** is devices mapped as read only
|
|- mapping_path
*** relative device path provided by the client during mapping
Link: https://lore.kernel.org/r/20200511135131.27580-23-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:27 +0000 (15:51 +0200)]
block/rnbd: server: functionality for IO submitting to block dev
This provides helper functions for IO submitting to block dev.
Link: https://lore.kernel.org/r/20200511135131.27580-22-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:26 +0000 (15:51 +0200)]
block/rnbd: server: main functionality
This is main functionality of rnbd-server module, which handles RTRS
events and rnbd protocol requests, like map (open) or unmap (close)
device. Also server side is responsible for processing incoming IBTRS IO
requests and forward them to local mapped devices.
Link: https://lore.kernel.org/r/20200511135131.27580-21-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:25 +0000 (15:51 +0200)]
block/rnbd: server: private header with server structs and functions
This header describes main structs and functions used by rnbd-server
module, namely structs for managing sessions from different clients and
mapped (opened) devices.
Link: https://lore.kernel.org/r/20200511135131.27580-20-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:24 +0000 (15:51 +0200)]
block/rnbd: client: sysfs interface functions
This is the sysfs interface to rnbd block devices on client side:
/sys/class/rnbd-client/ctl/
|- map_device
| *** maps remote device
|
|- devices/
*** all mapped devices
/sys/block/rnbd<N>/rnbd/
|- unmap_device
| *** unmaps device
|
|- state
| *** device state
|
|- session
| *** session name
|
|- mapping_path
*** path of the dev that was mapped on server
Link: https://lore.kernel.org/r/20200511135131.27580-19-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:23 +0000 (15:51 +0200)]
block/rnbd: client: main functionality
This is main functionality of rnbd-client module, which provides interface
to map remote device as local block device /dev/rnbd<N> and feeds RTRS
with IO requests.
Link: https://lore.kernel.org/r/20200511135131.27580-18-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:22 +0000 (15:51 +0200)]
block/rnbd: client: private header with client structs and functions
This header describes main structs and functions used by rnbd-client
module, mainly for managing RNBD sessions and mapped block devices,
creating and destroying sysfs entries.
Link: https://lore.kernel.org/r/20200511135131.27580-17-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:21 +0000 (15:51 +0200)]
block/rnbd: private headers with rnbd protocol structs and helpers
These are common private headers with rnbd protocol structures, logging,
sysfs and other helper functions, which are used on both client and server
sides.
Link: https://lore.kernel.org/r/20200511135131.27580-16-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:20 +0000 (15:51 +0200)]
RDMA/rtrs: a bit of documentation
README with description of major sysfs entries, sysfs documentation has
been moved to ABI dir as suggested by Bart.
Link: https://lore.kernel.org/r/20200511135131.27580-15-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:19 +0000 (15:51 +0200)]
RDMA/rtrs: include client and server modules into kernel compilation
Add rtrs Makefile, Kconfig and also corresponding lines into upper layer
infiniband/ulp files.
Link: https://lore.kernel.org/r/20200511135131.27580-14-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:18 +0000 (15:51 +0200)]
RDMA/rtrs: server: sysfs interface functions
This is the sysfs interface to rtrs sessions on server side:
/sys/class/rtrs-server/<SESS-NAME>/
*** rtrs session accepted from a client peer
|
|- paths/<SRC@DST>/
*** established paths from a client in a session
|
|- disconnect
| *** disconnect path
|
|- hca_name
| *** HCA name
|
|- hca_port
| *** HCA port
|
|- stats/
*** current path statistics
|
|- rdma
Link: https://lore.kernel.org/r/20200511135131.27580-13-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:17 +0000 (15:51 +0200)]
RDMA/rtrs: server: statistics functions
This introduces set of functions used on server side to account statistics
of RDMA data sent/received.
Link: https://lore.kernel.org/r/20200511135131.27580-12-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:16 +0000 (15:51 +0200)]
RDMA/rtrs: server: main functionality
This is main functionality of rtrs-server module, which accepts set of
RDMA connections (so called rtrs session), creates/destroys sysfs entries
associated with rtrs session and notifies upper layer
(user of RTRS API) about RDMA requests or link events.
Link: https://lore.kernel.org/r/20200511135131.27580-11-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:15 +0000 (15:51 +0200)]
RDMA/rtrs: server: private header with server structs and functions
This header describes main structs and functions used by rtrs-server
module, mainly for accepting rtrs sessions, creating/destroying sysfs
entries, accounting statistics on server side.
Link: https://lore.kernel.org/r/20200511135131.27580-10-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:14 +0000 (15:51 +0200)]
RDMA/rtrs: client: sysfs interface functions
This is the sysfs interface to rtrs sessions on client side:
/sys/class/rtrs-client/<SESS-NAME>/
*** rtrs session created by rtrs_clt_open() API call
|
|- max_reconnect_attempts
| *** number of reconnect attempts for session
|
|- add_path
| *** adds another connection path into rtrs session
|
|- paths/<SRC@DST>/
*** established paths to server in a session
|
|- disconnect
| *** disconnect path
|
|- reconnect
| *** reconnect path
|
|- remove_path
| *** remove current path
|
|- state
| *** retrieve current path state
|
|- hca_port
| *** HCA port number
|
|- hca_name
| *** HCA name
|
|- stats/
*** current path statistics
|
|- cpu_migration
|- rdma
|- reconnects
|- reset_all
Link: https://lore.kernel.org/r/20200511135131.27580-9-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:13 +0000 (15:51 +0200)]
RDMA/rtrs: client: statistics functions
This introduces set of functions used on client side to account statistics
of RDMA data sent/received, amount of IOs inflight, latency, cpu
migrations, etc. Almost all statistics are collected using percpu
variables.
Link: https://lore.kernel.org/r/20200511135131.27580-8-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:12 +0000 (15:51 +0200)]
RDMA/rtrs: client: main functionality
This is main functionality of rtrs-client module, which manages set of
RDMA connections for each rtrs session, does multipathing, load balancing
and failover of RDMA requests.
Link: https://lore.kernel.org/r/20200511135131.27580-7-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:11 +0000 (15:51 +0200)]
RDMA/rtrs: client: private header with client structs and functions
This header describes main structs and functions used by rtrs-client
module, mainly for managing rtrs sessions, creating/destroying sysfs
entries, accounting statistics on client side.
Link: https://lore.kernel.org/r/20200511135131.27580-6-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:10 +0000 (15:51 +0200)]
RDMA/rtrs: core: lib functions shared between client and server modules
This is a set of library functions existing as a rtrs-core module, used by
client and server modules.
Mainly these functions wrap IB and RDMA calls and provide a bit higher
abstraction for implementing of RTRS protocol on client or server sides.
Link: https://lore.kernel.org/r/20200511135131.27580-5-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:09 +0000 (15:51 +0200)]
RDMA/rtrs: private headers with rtrs protocol structs and helpers
These are common private headers with rtrs protocol structures, logging,
sysfs and other helper functions, which are used on both client and server
sides.
Link: https://lore.kernel.org/r/20200511135131.27580-4-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:08 +0000 (15:51 +0200)]
RDMA/rtrs: public interface header to establish RDMA connections
Introduce public header which provides set of API functions to establish
RDMA connections from client to server machine using RTRS protocol, which
manages RDMA connections for each session, does multipathing and load
balancing.
Main functions for client (active) side:
rtrs_clt_open() - Creates set of RDMA connections incapsulated
in IBTRS session and returns pointer on RTRS
session object.
rtrs_clt_close() - Closes RDMA connections associated with RTRS
session.
rtrs_clt_request() - Requests zero-copy RDMA transfer to/from
server.
Main functions for server (passive) side:
rtrs_srv_open() - Starts listening for RTRS clients on specified
port and invokes RTRS callbacks for incoming
RDMA requests or link events.
rtrs_srv_close() - Closes RTRS server context.
Link: https://lore.kernel.org/r/20200511135131.27580-3-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Wang [Mon, 11 May 2020 13:51:07 +0000 (15:51 +0200)]
sysfs: export sysfs_remove_file_self()
Function is going to be used in transport over RDMA module in subsequent
patches, so export it to GPL modules.
Link: https://lore.kernel.org/r/20200511135131.27580-2-danil.kipnis@cloud.ionos.com
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: linux-kernel@vger.kernel.org
[jwang: extend the commit message]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Wed, 13 May 2020 10:08:09 +0000 (13:08 +0300)]
RDMA/mlx5: Fix query_srq_cmd() function
The output buffer used in mlx5_cmd_exec_inout() was wrongly changed from
pre-allocated srq_out pointer to an input "out" point. That leads to
unpredictable results in the get_srqc() call later.
Fixes:
31578defe4eb ("RDMA/mlx5: Update mlx5_ib to use new cmd interface")
Link: https://lore.kernel.org/r/20200513100809.246315-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Daria Velikovsky [Mon, 4 May 2020 05:42:27 +0000 (08:42 +0300)]
RDMA/mlx5: Add support for drop action in DV steering
When drop action is used the matching packet will stop processing in
steering and will be dropped. This functionality will allow users to drop
matching packets.
Link: https://lore.kernel.org/r/20200504054227.271486-1-leon@kernel.org
Signed-off-by: Daria Velikovsky <daria@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Mon, 4 May 2020 05:30:12 +0000 (08:30 +0300)]
RDMA/mlx5: Add support in steering default miss
User can configure default miss rule in order to skip matching in the user
domain and forward the packet to the kernel steering domain. When user
requests a default miss rule, we add steering rule to forward the traffic
to the next namespace.
Link: https://lore.kernel.org/r/20200504053012.270689-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Mon, 4 May 2020 05:30:11 +0000 (08:30 +0300)]
RDMA/mlx5: Refactor DV create flow
Move part of the code that get the destinations into function so the code
will be more readable. In addition change the variables definition to be
in reversed christmas tree.
Link: https://lore.kernel.org/r/20200504053012.270689-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 13 May 2020 18:54:19 +0000 (15:54 -0300)]
Merge branch 'mellanox/mlx5-next' into rdma.git for/next
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* branch 'mellanox/mlx5-next':
net/mlx5: Add support in forward to namespace
{IB/net}/mlx5: Simplify don't trap code
net/mlx5: Replace zero-length array with flexible-array
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Mon, 4 May 2020 05:30:10 +0000 (08:30 +0300)]
net/mlx5: Add support in forward to namespace
Currently, fs_core supports rule of forward the traffic
to continue matching in the next priority, now we add support
to forward the traffic matching in the next namespace.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Maor Gottlieb [Mon, 4 May 2020 05:30:09 +0000 (08:30 +0300)]
{IB/net}/mlx5: Simplify don't trap code
The fs_core already supports creation of rules with multiple
actions/destinations. Refactor fs_core to handle the case
when don't trap rule is created with destination. Adapt the
calling code in the driver.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Gustavo A. R. Silva [Thu, 7 May 2020 18:53:42 +0000 (13:53 -0500)]
IB/rdmavt: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200507185342.GA14476@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:47:01 +0000 (10:47 +0300)]
RDMA/cm: Increment the refcount inside cm_find_listen()
All callers need the 'get', so do it in a central place before returning
the pointer.
Link: https://lore.kernel.org/r/20200506074701.9775-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:47:00 +0000 (10:47 +0300)]
RDMA/cm: Remove needless cm_id variable
Just put the expression in the only reader
Link: https://lore.kernel.org/r/20200506074701.9775-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:46:59 +0000 (10:46 +0300)]
RDMA/cm: Remove the cm_free_id() wrapper function
Just call xa_erase directly during cm_destroy_id()
Link: https://lore.kernel.org/r/20200506074701.9775-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:46:58 +0000 (10:46 +0300)]
RDMA/cm: Make find_remote_id() return a cm_id_private
The only caller doesn't care about the timewait, so acquire and return the
cm_id_private from the function.
Link: https://lore.kernel.org/r/20200506074701.9775-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:46:57 +0000 (10:46 +0300)]
RDMA/cm: Add a note explaining how the timewait is eventually freed
The way the cm_timewait_info is converted into a work and then freed
is very subtle and surprising, add a note clarifying the lifetime
here.
Link: https://lore.kernel.org/r/20200506074701.9775-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:46:56 +0000 (10:46 +0300)]
RDMA/cm: Pass the cm_id_private into cm_cleanup_timewait
Also rename it to cm_remove_remote(). This function now removes the
tracking of the remote ID/QPN in the redblack trees from a cm_id_private.
Replace a open-coded version with a call. The open coded version was
deleting only the remote_id, however at this call site the qpn can not
have been in the RB tree either, so the cm_remove_remote() will do the
same.
Link: https://lore.kernel.org/r/20200506074701.9775-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:46:55 +0000 (10:46 +0300)]
RDMA/cm: Pull duplicated code into cm_queue_work_unlock()
While unlocking a spinlock held by the caller is a disturbing pattern,
this extensively duplicated code is even worse. Pull all the duplicates
into a function and explain the purpose of the algorithm.
The on creation side call in cm_req_handler() which is different has been
micro-optimized on the basis that the work_count == -1 during creation,
remove that and just use the normal function.
Link: https://lore.kernel.org/r/20200506074701.9775-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Danit Goldberg [Wed, 6 May 2020 07:46:54 +0000 (10:46 +0300)]
RDMA/cm: Remove unused store to ret in cm_rej_handler
The 'goto out' label doesn't read ret, so don't set it.
Link: https://lore.kernel.org/r/20200506074701.9775-4-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:46:53 +0000 (10:46 +0300)]
RDMA/cm: Remove return code from add_cm_id_to_port_list
This cannot happen, all callers pass in one of the two pointers. Use
a WARN_ON guard instead.
Link: https://lore.kernel.org/r/20200506074701.9775-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 6 May 2020 07:46:52 +0000 (10:46 +0300)]
RDMA/addr: Mark addr_resolve as might_sleep()
Under one path through ib_nl_fetch_ha() this calls nlmsg_new(GFP_KERNEL)
which is a sleeping call. This is a very rare path, so mark fetch_ha() and
the module external entry point that conditionally calls through to
fetch_ha() as might_sleep().
Link: https://lore.kernel.org/r/20200506074701.9775-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lang Cheng [Tue, 5 May 2020 10:30:07 +0000 (18:30 +0800)]
RDMA/hns: Combine enable flags of qp
It's easier to understand and maintain enable flags of qp using a single
field in type of unsigned long than defining a field for every flags in
the structure hns_roce_qp, and we can add new flags for features more
conveniently in the future.
Link: https://lore.kernel.org/r/1588674607-25337-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Weihang Li [Tue, 5 May 2020 10:30:06 +0000 (18:30 +0800)]
RDMA/hns: Extend capability flags for HIP08_C
12 bits is not enough for HIP08_C, so extend a new field in length of 16
bits for it.
Link: https://lore.kernel.org/r/1588674607-25337-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Mon, 4 May 2020 13:25:41 +0000 (16:25 +0300)]
RDMA/ucma: Return stable IB device index as identifier
The librdmacm uses node_guid as identifier to correlate between IB devices
and CMA devices. However FW resets cause to such "connection" to be lost
and require from the user to restart its application.
Extend UCMA to return IB device index, which is stable identifier.
Link: https://lore.kernel.org/r/20200504132541.355710-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gustavo A. R. Silva [Thu, 7 May 2020 18:59:35 +0000 (13:59 -0500)]
net/mlx5: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Colin Ian King [Thu, 7 May 2020 15:16:10 +0000 (16:16 +0100)]
RDMA/mlx5: Remove duplicated assignment to variable rcqe_sz
The variable rcqe_sz is being unnecessarily assigned twice, fix this by
removing one of the duplicates.
Fixes:
8bde2c509e40 ("RDMA/mlx5: Update all DRIVER QP places to use QP subtype")
Link: https://lore.kernel.org/r/20200507151610.52636-1-colin.king@canonical.com
Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Bloch [Wed, 6 May 2020 07:16:02 +0000 (10:16 +0300)]
RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled
When operating in switchdev mode or using devlink to disable RoCE
only raw Ethernet QPs are allowed to be created.
When in switchdev mode this can lead to passing an invalid port number
as part of the modify qp firmware cmd and will lead to a syndrome
reported back to the user, such as:
* mlx5_cmd_check:803:(pid 50148): RST2INIT_QP(0x502) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x177405).
Internal UD QP might be used to test for write combining support (even if
externally we report RoCE as disabled) check for that specific flag and
allow is specifically.
Fixes:
b5ca15ad7e61 ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200506071602.7177-3-leon@kernel.org
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Bloch [Wed, 6 May 2020 07:16:01 +0000 (10:16 +0300)]
RDMA/mlx5: Assign profile before calling stages
Assign the profile to the IB device before executing stages. This will
allow to check which profile is being used from within a stage.
Link: https://lore.kernel.org/r/20200506071602.7177-2-leon@kernel.org
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Wed, 6 May 2020 06:55:13 +0000 (09:55 +0300)]
RDMA/mlx5: Move all WR logic from qp.c to separate file
Split qp.c by removing all WR logic to separate file.
Link: https://lore.kernel.org/r/20200506065513.4668-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Max Gurtovoy [Wed, 6 May 2020 06:55:12 +0000 (09:55 +0300)]
RDMA/mlx5: Refactor mlx5_post_send() to improve readability
Add small helpers in order to avoid code duplication and improve code
readability. Decrease the amount of code in the gigantic post_send
function and divide it to readable methods that will help in code
maintenance in the future.
Link: https://lore.kernel.org/r/20200506065513.4668-3-leon@kernel.org
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Wed, 6 May 2020 06:55:11 +0000 (09:55 +0300)]
RDMA/mlx5: Update mlx5_ib to use new cmd interface
Reuse newly introduced mlx5_cmd_exec_in() and mlx5_cmd_exec_inout() to
reduce code duplication in mlx5_ib module.
Link: https://lore.kernel.org/r/20200506065513.4668-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Wenpeng Liang [Thu, 30 Apr 2020 10:31:31 +0000 (18:31 +0800)]
RDMA/hns: Remove redundant assignment of caps
These caps are assigned in query_pf_caps() or set_default_caps(), and
should not be assigned out of these two functions.
Link: https://lore.kernel.org/r/1588242691-12913-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Weihang Li [Thu, 30 Apr 2020 10:31:30 +0000 (18:31 +0800)]
RDMA/hns: Adjust lp_pktn_ini dynamically
lp_pktn_ini means the number of loopback slice packets for long messages,
it should depend on MTU(fixed to 4096B currently) and max size of SQ
inline.
Link: https://lore.kernel.org/r/1588242691-12913-3-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Weihang Li [Thu, 30 Apr 2020 10:31:29 +0000 (18:31 +0800)]
RDMA/hns: Fix comments with non-English symbols
There is a comments with some chinese semicolons that cause encoding
issues each time hns_roc_hw_v2.h was modified from a IDE. So fix this by
using correct symbols.
Link: https://lore.kernel.org/r/1588242691-12913-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Xi Wang [Tue, 28 Apr 2020 11:03:43 +0000 (19:03 +0800)]
RDMA/hns: Optimize SRQ buffer size calculating process
Optimize the SRQ's WQE buffer parameters calculating process to make the
codes more readable by using new functions about multi-hop addressing to
calculating capabilities of SRQ.
Link: https://lore.kernel.org/r/1588071823-40200-6-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yixian Liu [Tue, 28 Apr 2020 11:03:42 +0000 (19:03 +0800)]
RDMA/hns: Move SRQ code to the reasonable place
Just move the SRQ related code to more reasonable place, and unify format
of some prints.
Link: https://lore.kernel.org/r/1588071823-40200-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Xi Wang [Tue, 28 Apr 2020 11:03:41 +0000 (19:03 +0800)]
RDMA/hns: Optimize WQE buffer size calculating process
Optimize the QP's WQE buffer parameters calculating process to make the
codes more readable mainly by merging calculation of extended sge space of
kernel and userspace. In addition, add some inline functions to simply
codes about multi-hop addressing.
Link: https://lore.kernel.org/r/1588071823-40200-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Xi Wang [Tue, 28 Apr 2020 11:03:40 +0000 (19:03 +0800)]
RDMA/hns: Remove unused MTT functions
The MTT (Memory Translate Table) interface is no longer used to configure
the buffer address to BT (Base Address Table) that requires driver
mapping. Because the MTT is not compatible with multi-hop addressing of
the hip08, it is replaced by MTR (Memory Translate Region) interface, and
all the MTT functions should be removed.
Link: https://lore.kernel.org/r/1588071823-40200-3-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Xi Wang [Tue, 28 Apr 2020 11:03:39 +0000 (19:03 +0800)]
RDMA/hns: Optimize PBL buffer allocation process
PBL table has its own implementation for multi-hop addressing currently,
but for the hardware, all table's addressing use the same logic, there is
no need to implement repeatedly. So optimize the PBL buffer allocation
process by using the mtr's interfaces.
Link: https://lore.kernel.org/r/1588071823-40200-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:35 +0000 (08:19 +0300)]
RDMA/mlx5: Set UDP source port based on the grh.flow_label
Calculate UDP source port based on the grh.flow_label. If grh.flow_label
is not valid, we will use minimal supported UDP source port.
Link: https://lore.kernel.org/r/20200504051935.269708-6-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:34 +0000 (08:19 +0300)]
RDMA/cma: Initialize the flow label of CM's route path record
If flow label is not set by the user or it's not IPv4, initialize it with
the cma src/dst based on the "Kernighan and Ritchie's hash function".
Link: https://lore.kernel.org/r/20200504051935.269708-5-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:33 +0000 (08:19 +0300)]
RDMA/mlx5: Define RoCEv2 udp source port when set path
Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.
Link: https://lore.kernel.org/r/20200504051935.269708-4-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Mon, 4 May 2020 05:19:32 +0000 (08:19 +0300)]
RDMA/core: Consider flow label when building skb
Use rdma_flow_label_to_udp_sport to calculate the UDP source port of the
RoCEV2 packet.
Link: https://lore.kernel.org/r/20200504051935.269708-3-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:31 +0000 (08:19 +0300)]
RDMA/core: Add hash functions to calculate RoCEv2 flowlabel and UDP source port
Add two hash functions to distribute RoCE v2 UDP source and Flowlabel
symmetrically. These are user visible API and any change in the
implementation needs to be tested for inter-operability between old and
new variant.
Link: https://lore.kernel.org/r/20200504051935.269708-2-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 21 Apr 2020 17:24:40 +0000 (20:24 +0300)]
RDMA: Allow ib_client's to fail when add() is called
When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.
This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.
If the add() callback fails, then do not call any more client ops for the
device, even remove.
Remove all the now redundant checks for NULL client_data in ops callbacks.
Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.
Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Mon, 13 Apr 2020 13:24:08 +0000 (16:24 +0300)]
RDMA/mad: Remove snoop interface
Snoop interface is not used. Remove it.
Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gal Pressman [Mon, 20 Apr 2020 06:22:13 +0000 (09:22 +0300)]
RDMA/efa: Count admin commands errors
Add a new stat that counts admin commands failures, which might help when
debugging different issues.
Link: https://lore.kernel.org/r/20200420062213.44577-4-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gal Pressman [Mon, 20 Apr 2020 06:22:12 +0000 (09:22 +0300)]
RDMA/efa: Count mmap failures
Add a new stat that counts mmap failures, which might help when debugging
different issues.
Link: https://lore.kernel.org/r/20200420062213.44577-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gal Pressman [Mon, 20 Apr 2020 06:22:11 +0000 (09:22 +0300)]
RDMA/efa: Report create CQ error counter
Create CQ errors are already being counted, report them along all other
counters.
Link: https://lore.kernel.org/r/20200420062213.44577-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:46 +0000 (22:21 +0300)]
RDMA/mlx5: Set lag tx affinity according to slave
The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.
For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result. For connected QPs, the driver
sets the affinity of the xmit slave.
The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.
Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:45 +0000 (22:21 +0300)]
RDMA/mlx5: Refactor affinity related code
Move affinity related code in modify qp to function. It's a preparation
for next patch the extend the affinity calculation to consider the xmit
slave.
Link: https://lore.kernel.org/r/20200430192146.12863-16-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:44 +0000 (22:21 +0300)]
RDMA/core: Get xmit slave for LAG
Add a call to rdma_lag_get_ah_roce_slave() when the address handle is
created. Lower driver can use it to select the QP's affinity port.
Link: https://lore.kernel.org/r/20200430192146.12863-15-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:43 +0000 (22:21 +0300)]
RDMA/core: Add LAG functionality
Add support to get the RoCE LAG xmit slave by building skb of the RoCE
packet and call to master_get_xmit_slave. If driver wants to get the
slave assume all slaves are available, then need to set
RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags.
Link: https://lore.kernel.org/r/20200430192146.12863-14-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:42 +0000 (22:21 +0300)]
RDMA: Group create AH arguments in struct
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Sat, 2 May 2020 23:18:45 +0000 (20:18 -0300)]
Merge branch 'mellanox/mlx5-next' into rdma.git for-next
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* mellanox/mlx5-next:
net/mlx5: Add support to get lag physical port
net/mlx5: Change lag mutex lock to spin lock
bonding: Implement ndo_get_xmit_slave
bonding: Add array of all slaves
bonding: Add function to get the xmit slave in active-backup mode
bonding: Add helper function to get the xmit slave in rr mode
bonding: Add helper function to get the xmit slave based on hash
bonding/alb: Add helper functions to get the xmit slave
bonding: Rename slave_arr to usable_slaves
bonding: Export skip slave logic to function
net/core: Introduce netdev_get_xmit_slave