ALSA: hda - Fix cancel_work_sync() stall from jackpoll work

commit 16037643969e095509cd8446a3f8e406a6dc3a2c upstream.

On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset().  This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.

As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.

This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Do not allow reexecute_instruction() when skipping MMIO instr

commit c4409905cd6eb42cfd06126e9226b0150e05a715 upstream.

Re-execution after an emulation decode failure is only intended to
handle a case where two or vCPUs race to write a shadowed page, i.e.
we should never re-execute an instruction as part of MMIO emulation.
As handle_ept_misconfig() is only used for MMIO emulation, it should
pass EMULTYPE_NO_REEXECUTE when using the emulator to skip an instr
in the fast-MMIO case where VM_EXIT_INSTRUCTION_LEN is invalid.

And because the cr2 value passed to x86_emulate_instruction() is only
destined for use when retrying or reexecuting, we can simply call
emulate_instruction().

Fixes: d391f1207067 ("x86/kvm/vmx: do not use vm-exit instruction length
                      for fast MMIO when running nested")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: vsie: copy wrapping keys to right place

commit 204c97245612b6c255edf4e21e24d417c4a0c008 upstream.

Copy the key mask to the right offset inside the shadow CRYCB

Fixes: bbeaa58b3 ("KVM: s390: vsie: support aes dea wrapping keys")
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Cc: stable@vger.kernel.org # v4.8+
Message-Id: <1535019956-23539-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix data corruption when deduplicating between different files

commit de02b9f6bb65a6a1848f346f7a3617b7a9b930c0 upstream.

If we deduplicate extents between two different files we can end up
corrupting data if the source range ends at the size of the source file,
the source file's size is not aligned to the filesystem's block size
and the destination range does not go past the size of the destination
file size.

Example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ xfs_io -f -c "pwrite -S 0x6b 0 2518890" /mnt/foo
  # The first byte with a value of 0xae starts at an offset (2518890)
  # which is not a multiple of the sector size.
  $ xfs_io -c "pwrite -S 0xae 2518890 102398" /mnt/foo

  # Confirm the file content is full of bytes with values 0x6b and 0xae.
  $ od -t x1 /mnt/foo
  0000000 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
  *
  11467540 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ae ae ae ae ae ae
  11467560 ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae
  *
  11777540 ae ae ae ae ae ae ae ae
  11777550

  # Create a second file with a length not aligned to the sector size,
  # whose bytes all have the value 0x6b, so that its extent(s) can be
  # deduplicated with the first file.
  $ xfs_io -f -c "pwrite -S 0x6b 0 557771" /mnt/bar

  # Now deduplicate the entire second file into a range of the first file
  # that also has all bytes with the value 0x6b. The destination range's
  # end offset must not be aligned to the sector size and must be less
  # then the offset of the first byte with the value 0xae (byte at offset
  # 2518890).
  $ xfs_io -c "dedupe /mnt/bar 0 1957888 557771" /mnt/foo

  # The bytes in the range starting at offset 2515659 (end of the
  # deduplication range) and ending at offset 2519040 (start offset
  # rounded up to the block size) must all have the value 0xae (and not
  # replaced with 0x00 values). In other words, we should have exactly
  # the same data we had before we asked for deduplication.
  $ od -t x1 /mnt/foo
  0000000 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
  *
  11467540 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ae ae ae ae ae ae
  11467560 ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae
  *
  11777540 ae ae ae ae ae ae ae ae
  11777550

  # Unmount the filesystem and mount it again. This guarantees any file
  # data in the page cache is dropped.
  $ umount /dev/sdb
  $ mount /dev/sdb /mnt

  $ od -t x1 /mnt/foo
  0000000 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
  *
  11461300 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 00
  11461320 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  11470000 ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae ae
  *
  11777540 ae ae ae ae ae ae ae ae
  11777550

  # The bytes in range 2515659 to 2519040 have a value of 0x00 and not a
  # value of 0xae, data corruption happened due to the deduplication
  # operation.

So fix this by rounding down, to the sector size, the length used for the
deduplication when the following conditions are met:

  1) Source file's range ends at its i_size;
  2) Source file's i_size is not aligned to the sector size;
  3) Destination range does not cross the i_size of the destination file.

Fixes: e1d227a42ea2 ("btrfs: Handle unaligned length in extent_same")
CC: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: check for and properly advertise directory lease support

commit f801568332321e2b1e7a8bd26c3e4913a312a2ec upstream.

Although servers will typically ignore unsupported features,
we should advertise the support for directory leases (as
Windows e.g. does) in the negotiate protocol capabilities we
pass to the server, and should check for the server capability
(CAP_DIRECTORY_LEASING) before sending a lease request for an
open of a directory.  This will prevent us from accidentally
sending directory leases to SMB2.1 or SMB2 server for example.

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: Backup intent flag missing for directory opens with backupuid mounts

commit 5e19697b56a64004e2d0ff1bb952ea05493c088f upstream.

When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag needs to be set
on opens of directories (and files) but was missing in some
places causing access denied trying to enumerate and backup
servers.

Fixes kernel bugzilla #200953
https://bugzilla.kernel.org/show_bug.cgi?id=200953

Reported-and-tested-by: <whh@rubrik.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: VDSO: Match data page cache colouring when D$ aliases

commit 0f02cfbc3d9e413d450d8d0fd660077c23f67eff upstream.

When a system suffers from dcache aliasing a user program may observe
stale VDSO data from an aliased cache line. Notably this can break the
expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name
suggests, monotonic.

In order to ensure that users observe updates to the VDSO data page as
intended, align the user mappings of the VDSO data page such that their
cache colouring matches that of the virtual address range which the
kernel will use to update the data page - typically its unmapped address
within kseg0.

This ensures that we don't introduce aliasing cache lines for the VDSO
data page, and therefore that userland will observe updates without
requiring cache invalidation.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Rene Nielsen <rene.nielsen@microsemi.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Patchwork: https://patchwork.linux-mips.org/patch/20344/
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

android: binder: fix the race mmap and alloc_new_buf_locked

commit da1b9564e85b1d7baf66cbfabcab27e183a1db63 upstream.

There is RaceFuzzer report like below because we have no lock to close
below the race between binder_mmap and binder_alloc_new_buf_locked.
To close the race, let's use memory barrier so that if someone see
alloc->vma is not NULL, alloc->vma_vm_mm should be never NULL.

(I didn't add stable mark intentionallybecause standard android
userspace libraries that interact with binder (libbinder & libhwbinder)
prevent the mmap/ioctl race. - from Todd)

"
Thread interleaving:
CPU0 (binder_alloc_mmap_handler)              CPU1 (binder_alloc_new_buf_locked)
=====                                         =====
// drivers/android/binder_alloc.c
// #L718 (v4.18-rc3)
alloc->vma = vma;
                                              // drivers/android/binder_alloc.c
                                              // #L346 (v4.18-rc3)
                                              if (alloc->vma == NULL) {
                                                  ...
                                                  // alloc->vma is not NULL at this point
                                                  return ERR_PTR(-ESRCH);
                                              }
                                              ...
                                              // #L438
                                              binder_update_page_range(alloc, 0,
                                                      (void *)PAGE_ALIGN((uintptr_t)buffer->data),
                                                      end_page_addr);

                                              // In binder_update_page_range() #L218
                                              // But still alloc->vma_vm_mm is NULL here
                                              if (need_mm && mmget_not_zero(alloc->vma_vm_mm))
alloc->vma_vm_mm = vma->vm_mm;

Crash Log:
==================================================================
BUG: KASAN: null-ptr-deref in __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline]
BUG: KASAN: null-ptr-deref in atomic_add_unless include/linux/atomic.h:533 [inline]
BUG: KASAN: null-ptr-deref in mmget_not_zero include/linux/sched/mm.h:75 [inline]
BUG: KASAN: null-ptr-deref in binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218
Write of size 4 at addr 0000000000000058 by task syz-executor0/11184

CPU: 1 PID: 11184 Comm: syz-executor0 Not tainted 4.18.0-rc3 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x16e/0x22c lib/dump_stack.c:113
 kasan_report_error mm/kasan/report.c:352 [inline]
 kasan_report+0x163/0x380 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x140/0x1a0 mm/kasan/kasan.c:267
 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278
 __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline]
 atomic_add_unless include/linux/atomic.h:533 [inline]
 mmget_not_zero include/linux/sched/mm.h:75 [inline]
 binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218
 binder_alloc_new_buf_locked drivers/android/binder_alloc.c:443 [inline]
 binder_alloc_new_buf+0x467/0xc30 drivers/android/binder_alloc.c:513
 binder_transaction+0x125b/0x4fb0 drivers/android/binder.c:2957
 binder_thread_write+0xc08/0x2770 drivers/android/binder.c:3528
 binder_ioctl_write_read.isra.39+0x24f/0x8e0 drivers/android/binder.c:4456
 binder_ioctl+0xa86/0xf34 drivers/android/binder.c:4596
 vfs_ioctl fs/ioctl.c:46 [inline]
 do_vfs_ioctl+0x154/0xd40 fs/ioctl.c:686
 ksys_ioctl+0x94/0xb0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:706
 do_syscall_64+0x167/0x4b0 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
"

Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: bfq: swap puts in bfqg_and_blkg_put

commit d5274b3cd6a814ccb2f56d81ee87cbbf51bd4cf7 upstream.

Fix trivial use-after-free. This could be last reference to bfqg.

Fixes: 8f9bebc33dd7 ("block, bfq: access and cache blkg data only when safe")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: don't allow invalid blocksize settings

commit bc811f05d77f47059c197a98b6ad242eb03999cb upstream.

syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl.
We need proper validation of the input here. Not just if it's
zero, but also if the value is a power-of-2 and in a valid
range. Add that.

Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Correct MDS diag and nvmet configuration

commit 53e13ee087a80e8d4fc95436318436e5c2c1f8c2 upstream.

A recent change added some MDS processing in the lpfc_drain_txq routine
that relies on the fcp_wq being allocated. For nvmet operation the fcp_wq
is not allocated because it can only be an nvme-target.  When the original
MDS support was added LS_MDS_LOOPBACK was defined wrong, (0x16) it should
have been 0x10 (decimal value used for hex setting). This incorrect value
allowed MDS_LOOPBACK to be set simultaneously with LS_NPIV_FAB_SUPPORTED,
causing the driver to crash when it accesses the non-existent fcp_wq.

Correct the bad value setting for LS_MDS_LOOPBACK.

Fixes:  ae9e28f36a6c  ("lpfc: Add MDS Diagnostic support.")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i801: fix DNV's SMBCTRL register offset

commit 851a15114895c5bce163a6f2d57e0aa4658a1be4 upstream.

DNV's iTCO is slightly different with SMBCTRL sitting at a different
offset when compared to all other devices. Let's fix so that we can
properly use iTCO watchdog.

Fixes: 84d7f2ebd70d ("i2c: i801: Add support for Intel DNV")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: xiic: Make the start and the byte count write atomic

commit ae7304c3ea28a3ba47a7a8312c76c654ef24967e upstream.

Disable interrupts while configuring the transfer and enable them back.

We have below as the programming sequence
1. start and slave address
2. byte count and stop

In some customer platform there was a lot of interrupts between 1 and 2
and after slave address (around 7 clock cyles) if 2 is not executed
then the transaction is nacked.

To fix this case make the 2 writes atomic.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[wsa: added a newline for better readability]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.70

arm64: Handle mismatched cache type

commit 314d53d297980676011e6fd83dac60db4a01dc70 upstream.

Track mismatches in the cache type register (CTR_EL0), other
than the D/I min line sizes and trap user accesses if there are any.

Fixes: be68a8aaf925 ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Fix mismatched cache line size detection

commit 4c4a39dd5fe2d13e2d2fa5fceb8ef95d19fc389a upstream.

If there is a mismatch in the I/D min line size, we must
always use the system wide safe value both in applications
and in the kernel, while performing cache operations. However,
we have been checking more bits than just the min line sizes,
which triggers false negatives. We may need to trap the user
accesses in such cases, but not necessarily patch the kernel.

This patch fixes the check to do the right thing as advertised.
A new capability will be added to check mismatches in other
fields and ensure we trap the CTR accesses.

Fixes: be68a8aaf925 ("arm64: cpufeature: Fix CTR_EL0 field definitions")
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8994: Fix missing break in switch

commit ad0eaee6195db1db1749dd46b9e6f4466793d178 upstream.

Add missing break statement in order to prevent the code from falling
through to the default case.

Addresses-Coverity-ID: 115050 ("Missing break in switch")
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
[Gustavo: Backported to 3.16..4.18 - Remove code comment removal]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpu_errata: include required headers

commit 94a5d8790e79ab78f499d2d9f1ff2cab63849d9f upstream.

Without including psci.h and arm-smccc.h, we now get a build failure in
some configurations:

arch/arm64/kernel/cpu_errata.c: In function 'arm64_update_smccc_conduit':
arch/arm64/kernel/cpu_errata.c:278:10: error: 'psci_ops' undeclared (first use in this function); did you mean 'sysfs_ops'?

arch/arm64/kernel/cpu_errata.c: In function 'arm64_set_ssbd_mitigation':
arch/arm64/kernel/cpu_errata.c:311:3: error: implicit declaration of function 'arm_smccc_1_1_hvc' [-Werror=implicit-function-declaration]
   arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_2, state, NULL);

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: kvm: avoid unused variable warning

commit 7288bde1f9df6c1475675419bdd7725ce84dec56 upstream.

Removing one of the two accesses of the maxphyaddr variable led to
a harmless warning:

arch/x86/kvm/x86.c: In function 'kvm_set_mmio_spte_mask':
arch/x86/kvm/x86.c:6563:6: error: unused variable 'maxphyaddr' [-Werror=unused-variable]

Removing the #ifdef seems to be the nicest workaround, as it
makes the code look cleaner than adding another #ifdef.

Fixes: 28a1f3ac1d0c ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org # L1TF
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: Set highest physical address bits in non-present/reserved SPTEs

commit 28a1f3ac1d0c8558ee4453d9634dad891a6e922e upstream.

Always set the 5 upper-most supported physical address bits to 1 for SPTEs
that are marked as non-present or reserved, to make them unusable for
L1TF attacks from the guest. Currently, this just applies to MMIO SPTEs.
(We do not need to mark PTEs that are completely 0 as physical page 0
is already reserved.)

This allows mitigation of L1TF without disabling hyper-threading by using
shadow paging mode instead of EPT.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ARM: imx_v6_v7_defconfig: Select ULPI support"

This reverts commit 2059e527a659cf16d6bb709f1c8509f7a7623fc4.

This commit causes reboot to fail on imx6 wandboard, so let's
revert it.

Cc: <stable@vger.kernel.org> #4.14
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irda: Only insert new objects into the global database via setsockopt

The irda_setsockopt() function conditionally allocates memory for a new
self->ias_object or, in some cases, reuses the existing
self->ias_object. Existing objects were incorrectly reinserted into the
LM_IAS database which corrupted the doubly linked list used for the
hashbin implementation of the LM_IAS database. When combined with a
memory leak in irda_bind(), this issue could be leveraged to create a
use-after-free vulnerability in the hashbin list. This patch fixes the
issue by only inserting newly allocated objects into the database.

CVE-2018-6555

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irda: Fix memory leak caused by repeated binds of irda socket

The irda_bind() function allocates memory for self->ias_obj without
checking to see if the socket is already bound. A userspace process
could repeatedly bind the socket, have each new object added into the
LM-IAS database, and lose the reference to the old object assigned to
the socket to exhaust memory resources. This patch errors out of the
bind operation when self->ias_obj is already assigned.

CVE-2018-6554

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/lib: use expoline for all bcr instructions

commit 5eda25b10297684c1f46a14199ec00210f3c346e upstream.

The memove, memset, memcpy, __memset16, __memset32 and __memset64
function have an additional indirect return branch in form of a
"bzr" instruction. These need to use expolines as well.

Cc: <stable@vger.kernel.org> # v4.17+
Fixes: 97489e0663 ("s390/lib: use expoline for indirect branches")
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: make missing $DEPMOD a Warning instead of an Error

commit 914b087ff9e0e9a399a4927fa30793064afc0178 upstream.

When $DEPMOD is not found, only print a warning instead of exiting
with an error message and error status:

Warning: 'make modules_install' requires /sbin/depmod. Please install it.
This is probably in the kmod package.

Change the Error to a Warning because "not all build hosts for cross
compiling Linux are Linux systems and are able to provide a working
port of depmod, especially at the file patch /sbin/depmod."

I.e., "make modules_install" may be used to copy/install the
loadable modules files to a target directory on a build system and
then transferred to an embedded device where /sbin/depmod is run
instead of it being run on the build system.

Fixes: 934193a654c1 ("kbuild: verify that $DEPMOD is installed")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Maxim Zhukov <mussitantesmortem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Increase LSPCON timeout

commit 299c2a904b1e8d5096d4813df6371357d97a6cd1 upstream.

100 ms is not enough time for the LSPCON adapter on Intel NUC devices to
settle. This causes dropped display modes at boot or screen reconfiguration.
Empirical testing can reproduce the error up to a timeout of 190 ms. Basic
boot and stress testing at 200 ms has not (yet) failed.

Increase timeout to 400 ms to get some margin of error.

Changes from v1:
The initial suggestion of 1000 ms was lowered due to concerns about delaying
valid timeout cases.
Update patch metadata.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107503
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1570392
Fixes: 357c0ae9198a ("drm/i915/lspcon: Wait for expected LSPCON mode to settle")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Fredrik Schön <fredrik.schon@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180817200728.8154-1-fredrik.schon@gmail.com
(cherry picked from commit 59f1c8ab30d6f9042562949f42cbd3f3cf69de94)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Fredrik Schön <fredrik.schon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: don't write ptes directly in 32-bit PV guests

commit f7c90c2aa4004808dff777ba6ae2c7294dd06851 upstream.

In some cases 32-bit PAE PV guests still write PTEs directly instead of
using hypercalls. This is especially bad when clearing a PTE as this is
done via 32-bit writes which will produce intermediate L1TF attackable
PTEs.

Change the code to use hypercalls instead.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear

commit b2d7a075a1ccef2fb321d595802190c8e9b39004 upstream.

Using only 32-bit writes for the pte will result in an intermediate
L1TF vulnerable PTE. When running as a Xen PV guest this will at once
switch the guest to shadow mode resulting in a loss of performance.

Use arch_atomic64_xchg() instead which will perform the requested
operation atomically with all 64 bits.

Some performance considerations according to:

https://software.intel.com/sites/default/files/managed/ad/dc/Intel-Xeon-Scalable-Processor-throughput-latency.pdf

The main number should be the latency, as there is no tight loop around
native_ptep_get_and_clear().

"lock cmpxchg8b" has a latency of 20 cycles, while "lock xchg" (with a
memory operand) isn't mentioned in that document. "lock xadd" (with xadd
having 3 cycles less latency than xchg) has a latency of 11, so we can
assume a latency of 14 for "lock xchg".

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
[ Atomic operations gained an arch_ prefix in 8bf705d13039
("locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h") so
s/arch_atomic64_xchg/atomic64_xchg/ for backport.]
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume

commit 98112041bcca164676367e261c8c1073ef70cb51 upstream.

In order for ULPI PHYs to work, dwc3_phy_setup() and dwc3_ulpi_init()
must be doene before dwc3_core_get_phy().

commit 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys")
broke this.

The other issue is that dwc3_core_get_phy() and dwc3_ulpi_init() should
be called only once during the life cycle of the driver. However,
as dwc3_core_init() is called during system suspend/resume it will
result in multiple calls to dwc3_core_get_phy() and dwc3_ulpi_init()
which is wrong.

Fix this by moving dwc3_ulpi_init() out of dwc3_phy_setup()
into dwc3_core_ulpi_init(). Use a flag 'ulpi_ready' to ensure that
dwc3_core_ulpi_init() is called only once from dwc3_core_init().

Use another flag 'phys_ready' to call dwc3_core_get_phy() only once from
dwc3_core_init().

Fixes: 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys")
Fixes: f54edb539c11 ("usb: dwc3: core: initialize ULPI before trying to get the PHY")
Cc: linux-stable <stable@vger.kernel.org> # >= v4.13
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: add quirk for another PIXART OEM mouse used by HP

commit 01cffe9ded15c0d664e0beb33c594e00c0d57bba upstream.

This mouse keep disconnecting in runleve 3 like below, add it needs the
quirk to mute the anoying messages.

[  111.230555] usb 2-2: USB disconnect, device number 6
[  112.718156] usb 2-2: new low-speed USB device number 7 using xhci_hcd
[  112.941594] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a
[  112.984866] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  113.027731] usb 2-2: Product: HP USB Optical Mouse
[  113.069977] usb 2-2: Manufacturer: PixArt
[  113.113500] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0002/input/input14
[  113.156787] hid-generic 0003:03F0:094A.0002: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0
[  173.262642] usb 2-2: USB disconnect, device number 7
[  174.750244] usb 2-2: new low-speed USB device number 8 using xhci_hcd
[  174.935740] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a
[  174.990435] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  175.014984] usb 2-2: Product: HP USB Optical Mouse
[  175.037886] usb 2-2: Manufacturer: PixArt
[  175.061794] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0003/input/input15
[  175.084946] hid-generic 0003:03F0:094A.0003: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Fix devm_memremap_pages() collision handling

commit 77dd66a3c67c93ab401ccc15efff25578be281fd upstream.

If devm_memremap_pages() detects a collision while adding entries
to the radix-tree, we call pgmap_radix_release(). Unfortunately,
the function removes *all* entries for the range -- including the
entries that caused the collision in the first place.

Modify pgmap_radix_release() to take an additional argument to
indicate where to stop, so that only newly added entries are removed
from the tree.

Cc: <stable@vger.kernel.org>
Fixes: 9476df7d80df ("mm: introduce find_dev_pagemap()")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: pblk: free padded entries in write buffer

commit cd8ddbf7a5e206fe6995ab0aee245d597dd6a7f2 upstream.

When a REQ_FLUSH reaches pblk, the bio cannot be directly completed.
Instead, data on the write buffer is flushed and the bio is completed on
the completion pah. This might require some sectors to be padded in
order to guarantee a successful write.

This patch fixes a memory leak on the padded pages. A consequence of
this bad free was that internal bios not containing data (only a flush)
were not being completed.

Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/deadline: Fix switching to -deadline

commit 295d6d5e373607729bcc8182c25afe964655714f upstream.

Fix a bug introduced in:

  72f9f3fdc928 ("sched/deadline: Remove dl_new from struct sched_dl_entity")

After that commit, when switching to -deadline if the scheduling
deadline of a task is in the past then switched_to_dl() calls
setup_new_entity() to properly initialize the scheduling deadline
and runtime.

The problem is that the task is enqueued _before_ having its parameters
initialized by setup_new_entity(), and this can cause problems.
For example, a task with its out-of-date deadline in the past will
potentially be enqueued as the highest priority one; however, its
adjusted deadline may not be the earliest one.

This patch fixes the problem by initializing the task's parameters before
enqueuing it.

Signed-off-by: luca abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-3-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugobjects: Make stack check warning more informative

commit fc91a3c4c27acdca0bc13af6fbb68c35cfd519f2 upstream.

While debugging an issue debugobject tracking warned about an annotation
issue of an object on stack. It turned out that the issue was due to the
object in concern being on a different stack which was due to another
issue.

Thomas suggested to print the pointers and the location of the stack for
the currently running task. This helped to figure out that the object was
on the wrong stack.

As this is general useful information for debugging similar issues, make
the error message more informative by printing the pointers.

[ tglx: Massaged changelog ]

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: kernel-team@android.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: astrachan@google.com
Link: https://lkml.kernel.org/r/20180723212531.202328-1-joel@joelfernandes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name

commit 8a2336e549d385bb0b46880435b411df8d8200e8 upstream.

Since this header is in "include/uapi/linux/", apparently people want to
use it in userspace programs -- even in C++ ones.  However, the header
uses a C++ reserved keyword ("private"), so change that to "dh_private"
instead to allow the header file to be used in C++ userspace.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051
Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org
Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu:add VCN booting with firmware loaded by PSP

commit 4d77c0f676e910fb1f1870738aa4bd168f253621 upstream.

Setup psp firmware loading for VCN, and make VCN block
booting from tmr mac address.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu:add VCN support in PSP driver

commit 235ac9de625a0a586093ad81b3de6f7d7ab913ed upstream.

Add VCN support in PSP driver

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu:add new firmware id for VCN

commit c9ca989696ff28ffb015cc2b7c5577938ef2626c upstream.

Add the new firmware id for VCN into the enum

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu:add tmr mc address into amdgpu_firmware_info

commit abf412b3efb2f943d9b98a489e9aca836be21333 upstream.

amdgpu IP blocks booting need Trust Memory Region(tmr) mc address
of its firmware which is loaded by PSP

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Likun Gao <likun.gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: update tmr mc address

commit 435198f33b56d7b875a8173a0227ddf0de285aa1 upstream.

Update tmr mc address with firmware loading address
which is returned from PSP firmware

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80

commit 25da75043f8690fd083878447c91f289dfb63b87 upstream.

Another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc
instead of 8 bpc.

Apply 6 bpc quirk for the panel to fix it.

BugLink: https://bugs.launchpad.net/bugs/1788308
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180823055332.7723-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pp/Polaris12: Fix a chunk of registers missed to program

commit 2d227ec2c11c568910299e8f913bac2dda47397c upstream.

DIDTConfig_Polaris12[] table missed a big chunk of data.

Pointed by aidan.fabius <aidan.fabius@coreavi.com>

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix RLC safe mode test in gfx_v9_0_enter_rlc_safe_mode

commit 226127a67e31a9518d9516d3e4890759b379d874 upstream.

We were testing the register offset, instead of the value stored in the
register, therefore always timing out the loop.

This reduces suspend time of the system in the bug report below by ~600
ms.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/107277
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/lpe: Mark LPE audio runtime pm as "no callbacks"

commit 75eef0f1ed478284911b8723a5bdb659499a7aac upstream.

The LPE audio is a child device of i915, it is powered up and down
alongside the igfx and presents no independent runtime interface. This
aptly fulfils the description of a "No-Callback" Device, so mark it
thus.

Fixes: 183c00350ccd ("drm/i915: Fix runtime PM for LPE audio")
Testcase: igt/pm_rpm/basic-pci-d3-state
Testcase: igt/pm_rpm/basic-rte
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802140416.6062-1-chris@chris-wilson.co.uk
(cherry picked from commit 46e831abe864a6b59fa3de253a681c0f2ee1bf2f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: rockchip: Force CONFIG_PM on Rockchip systems

[ Upstream commit d1558dfd9f22c99a5b8e1354ad881ee40749da89 ]

A number of the Rockchip-specific drivers (IOMMU, display controllers)
are now assuming that CONFIG_PM is set, and may completely misbehave
if that's not the case.

Since there is hardly any reason for this configuration option not
to be selected anyway, let's require it (in the same way Tegra already
does).

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: rockchip: Force CONFIG_PM on Rockchip systems

[ Upstream commit 7db7a8f5638a2ffe0c0c0d55b5186b6191fd6af7 ]

A number of the Rockchip-specific drivers (IOMMU, display controllers)
are now assuming that CONFIG_PM is set, and may completely misbehave
if that's not the case.

Since there is hardly any reason for this configuration option not
to be selected anyway, let's require it (in the same way Tegra already
does).

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Don't remove block group that still has pinned down bytes

[ Upstream commit 43794446548730ac8461be30bbe47d5d027d1d16 ]

[BUG]
Under certain KVM load and LTP tests, it is possible to hit the
following calltrace if quota is enabled:

BTRFS critical (device vda2): unable to find logical 8820195328 length 4096
BTRFS critical (device vda2): unable to find logical 8820195328 length 4096

WARNING: CPU: 0 PID: 49 at ../block/blk-core.c:172 blk_status_to_errno+0x1a/0x30
CPU: 0 PID: 49 Comm: kworker/u2:1 Not tainted 4.12.14-15-default #1 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
task: ffff9f827b340bc0 task.stack: ffffb4f8c0304000
RIP: 0010:blk_status_to_errno+0x1a/0x30
Call Trace:
 submit_extent_page+0x191/0x270 [btrfs]
 ? btrfs_create_repair_bio+0x130/0x130 [btrfs]
 __do_readpage+0x2d2/0x810 [btrfs]
 ? btrfs_create_repair_bio+0x130/0x130 [btrfs]
 ? run_one_async_done+0xc0/0xc0 [btrfs]
 __extent_read_full_page+0xe7/0x100 [btrfs]
 ? run_one_async_done+0xc0/0xc0 [btrfs]
 read_extent_buffer_pages+0x1ab/0x2d0 [btrfs]
 ? run_one_async_done+0xc0/0xc0 [btrfs]
 btree_read_extent_buffer_pages+0x94/0xf0 [btrfs]
 read_tree_block+0x31/0x60 [btrfs]
 read_block_for_search.isra.35+0xf0/0x2e0 [btrfs]
 btrfs_search_slot+0x46b/0xa00 [btrfs]
 ? kmem_cache_alloc+0x1a8/0x510
 ? btrfs_get_token_32+0x5b/0x120 [btrfs]
 find_parent_nodes+0x11d/0xeb0 [btrfs]
 ? leaf_space_used+0xb8/0xd0 [btrfs]
 ? btrfs_leaf_free_space+0x49/0x90 [btrfs]
 ? btrfs_find_all_roots_safe+0x93/0x100 [btrfs]
 btrfs_find_all_roots_safe+0x93/0x100 [btrfs]
 btrfs_find_all_roots+0x45/0x60 [btrfs]
 btrfs_qgroup_trace_extent_post+0x20/0x40 [btrfs]
 btrfs_add_delayed_data_ref+0x1a3/0x1d0 [btrfs]
 btrfs_alloc_reserved_file_extent+0x38/0x40 [btrfs]
 insert_reserved_file_extent.constprop.71+0x289/0x2e0 [btrfs]
 btrfs_finish_ordered_io+0x2f4/0x7f0 [btrfs]
 ? pick_next_task_fair+0x2cd/0x530
 ? __switch_to+0x92/0x4b0
 btrfs_worker_helper+0x81/0x300 [btrfs]
 process_one_work+0x1da/0x3f0
 worker_thread+0x2b/0x3f0
 ? process_one_work+0x3f0/0x3f0
 kthread+0x11a/0x130
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x35/0x40

BTRFS critical (device vda2): unable to find logical 8820195328 length 16384
BTRFS: error (device vda2) in btrfs_finish_ordered_io:3023: errno=-5 IO failure
BTRFS info (device vda2): forced readonly
BTRFS error (device vda2): pending csums is 2887680

[CAUSE]
It's caused by race with block group auto removal:

- There is a meta block group X, which has only one tree block
  The tree block belongs to fs tree 257.
- In current transaction, some operation modified fs tree 257
  The tree block gets COWed, so the block group X is empty, and marked
  as unused, queued to be deleted.
- Some workload (like fsync) wakes up cleaner_kthread()
  Which will call btrfs_delete_unused_bgs() to remove unused block
  groups.
  So block group X along its chunk map get removed.
- Some delalloc work finished for fs tree 257
  Quota needs to get the original reference of the extent, which will
  read tree blocks of commit root of 257.
  Then since the chunk map gets removed, the above warning gets
  triggered.

[FIX]
Just let btrfs_delete_unused_bgs() skip block group which still has
pinned bytes.

However there is a minor side effect: currently we only queue empty
blocks at update_block_group(), and such empty block group with pinned
bytes won't go through update_block_group() again, such block group
won't be removed, until it gets new extent allocated and removed.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: relocation: Only remove reloc rb_trees if reloc control has been initialized

[ Upstream commit 389305b2aa68723c754f88d9dbd268a400e10664 ]

Invalid reloc tree can cause kernel NULL pointer dereference when btrfs
does some cleanup of the reloc roots.

It turns out that fs_info::reloc_ctl can be NULL in
btrfs_recover_relocation() as we allocate relocation control after all
reloc roots have been verified.
So when we hit: note, we haven't called set_reloc_control() thus
fs_info::reloc_ctl is still NULL.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199833
Reported-by: Xu Wen <wen.xu@gatech.edu>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: replace: Reset on-disk dev stats value after replace

[ Upstream commit 1e7e1f9e3aba00c9b9c323bfeeddafe69ff21ff6 ]

on-disk devs stats value is updated in btrfs_run_dev_stats(),
which is called during commit transaction, if device->dev_stats_ccnt
is not zero.

Since current replace operation does not touch dev_stats_ccnt,
on-disk dev stats value is not updated. Therefore "btrfs device stats"
may return old device's value after umount/mount
(Example: See "btrfs ins dump-t -t DEV $DEV" after btrfs/100 finish).

Fix this by just incrementing dev_stats_ccnt in
btrfs_dev_replace_finishing() when replace is succeeded and this will
update the values.

Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Exit gracefully when chunk map cannot be inserted to the tree

[ Upstream commit 64f64f43c89aca1782aa672e0586f6903c5d8979 ]

It's entirely possible that a crafted btrfs image contains overlapping
chunks.

Although we can't detect such problem by tree-checker, it's not a
catastrophic problem, current extent map can already detect such problem
and return -EEXIST.

We just only need to exit gracefully and fail the mount.

Reported-by: Xu Wen <wen.xu@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200409
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: nVMX: Fix fault vector for VMX operation at CPL > 0

[ Upstream commit 36090bf43a6b835a42f515cb515ff6fa293a25fe ]

The fault that should be raised for a privilege level violation is #GP
rather than #UD.

Fixes: 727ba748e110b4 ("kvm: nVMX: Enforce cpl=0 for VMX instructions")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: vmx: track host_state.loaded using a loaded_vmcs pointer

[ Upstream commit bd9966de4e14fb559e89a06f7f5c9aab2cc028b9 ]

Using 'struct loaded_vmcs*' to track whether the CPU registers
contain host or guest state kills two birds with one stone.

  1. The (effective) boolean host_state.loaded is poorly named.
     It does not track whether or not host state is loaded into
     the CPU registers (which most readers would expect), but
     rather tracks if host state has been saved AND guest state
     is loaded.

  2. Using a loaded_vmcs pointer provides a more robust framework
     for the optimized guest/host state switching, especially when
     consideration per-VMCS enhancements.  To that end, WARN_ONCE
     if we try to switch to host state with a different VMCS than
     was last used to save host state.

Resolve an occurrence of the new WARN by setting loaded_vmcs after
the call to vmx_vcpu_put() in vmx_switch_vmcs().

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399

[ Upstream commit 640332d1a089909df08bc9f3e42888a2019c66e2 ]

PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in
RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave
from power on and the VDD_LOG is about 0.9V. When the kernel boots
normally into the system, the PWM2 keeps outputing PWM signal.

But the kernel hangs randomly after "Starting kernel ..." line on that
board. When it happens, PWM2 outputs high level which causes VDD_LOG
drops to 0.4V below the normal operating voltage.

By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array,
PWM clock is ensured to be prepared at startup and the PWM2 output is
normal. After repeated tests, the early boot hang is gone.

This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards.

Signed-off-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Avoid using the size greater than RTAS_ERROR_LOG_MAX.

[ Upstream commit 74e96bf44f430cf7a01de19ba6cf49b361cdfd6e ]

The global mce data buffer that used to copy rtas error log is of 2048
(RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read
extended_log_length from rtas error log header, then use max of
extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied.
Ideally the platform (phyp) will never send extended error log with
size > 2048. But if that happens, then we have a risk of buffer overrun
and corruption. Fix this by using min_t instead.

Fixes: d368514c3097 ("powerpc: Fix corruption when grabbing FWNMI data")
Reported-by: Michal Suchanek <msuchanek@suse.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Make rfi_flush_fallback a little more robust

[ Upstream commit 78ee9946371f5848ddfc88ab1a43867df8f17d83 ]

Because rfi_flush_fallback runs immediately before the return to
userspace it currently runs with the user r1 (stack pointer). This
means if we oops in there we will report a bad kernel stack pointer in
the exception entry path, eg:

  Bad kernel stack pointer 7ffff7150e40 at c0000000000023b4
  Oops: Bad kernel stack pointer, sig: 6 [#1]
  LE SMP NR_CPUS=32 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 1246 Comm: klogd Not tainted 4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3 #7
  NIP:  c0000000000023b4 LR: 0000000010053e00 CTR: 0000000000000040
  REGS: c0000000fffe7d40 TRAP: 4100   Not tainted  (4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3)
  MSR:  9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE>  CR: 44000442  XER: 20000000
  CFAR: c00000000000bac8 IRQMASK: c0000000f1e66a80
  GPR00: 0000000002000000 00007ffff7150e40 00007fff93a99900 0000000000000020
  ...
  NIP [c0000000000023b4] rfi_flush_fallback+0x34/0x80
  LR [0000000010053e00] 0x10053e00

Although the NIP tells us where we were, and the TRAP number tells us
what happened, it would still be nicer if we could report the actual
exception rather than barfing about the stack pointer.

We an do that fairly simply by loading the kernel stack pointer on
entry and restoring the user value before returning. That way we see a
regular oops such as:

  Unrecoverable exception 4100 at c00000000000239c
  Oops: Unrecoverable exception, sig: 6 [#1]
  LE SMP NR_CPUS=32 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 1251 Comm: klogd Not tainted 4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty #40
  NIP:  c00000000000239c LR: 0000000010053e00 CTR: 0000000000000040
  REGS: c0000000f1e17bb0 TRAP: 4100   Not tainted  (4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty)
  MSR:  9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE>  CR: 44000442  XER: 20000000
  CFAR: c00000000000bac8 IRQMASK: 0
  ...
  NIP [c00000000000239c] rfi_flush_fallback+0x3c/0x80
  LR [0000000010053e00] 0x10053e00
  Call Trace:
  [c0000000f1e17e30] [c00000000000b9e4] system_call+0x5c/0x70 (unreliable)

Note this shouldn't make the kernel stack pointer vulnerable to a
meltdown attack, because it should be flushed from the cache before we
return to userspace. The user r1 value will be in the cache, because
we load it in the return path, but that is harmless.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/platforms/85xx: fix t1042rdb_diu.c build errors & warning

[ Upstream commit f5daf77a55ef0e695cc90c440ed6503073ac5e07 ]

Fix build errors and warnings in t1042rdb_diu.c by adding header files
and MODULE_LICENSE().

../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: data definition has no type or storage class
 early_initcall(t1042rdb_diu_init);
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: error: type defaults to 'int' in declaration of 'early_initcall' [-Werror=implicit-int]
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: parameter names (without types) in function declaration

and
WARNING: modpost: missing MODULE_LICENSE() in arch/powerpc/platforms/85xx/t1042rdb_diu.o

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Scott Wood <oss@buserror.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: Number of requests sent should be displayed for SMB3 not just CIFS

[ Upstream commit 289131e1f1e6ad8c661ec05e176b8f0915672059 ]

For SMB2/SMB3 the number of requests sent was not displayed
in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was
enabled (only number of failed requests displayed). As
with earlier dialects, we should be displaying these
counters if CONFIG_CIFS_STATS is enabled. They
are important for debugging.

e.g. when you cat /proc/fs/cifs/Stats (before the patch)
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0

0 session 0 share reconnects
Total vfs operations: 690 maximum at one time: 2

1) \\localhost\test
SMBs: 975
Negotiates: 0 sent 0 failed
SessionSetups: 0 sent 0 failed
Logoffs: 0 sent 0 failed
TreeConnects: 0 sent 0 failed
TreeDisconnects: 0 sent 0 failed
Creates: 0 sent 2 failed
Closes: 0 sent 0 failed
Flushes: 0 sent 0 failed
Reads: 0 sent 0 failed
Writes: 0 sent 0 failed
Locks: 0 sent 0 failed
IOCTLs: 0 sent 1 failed
Cancels: 0 sent 0 failed
Echos: 0 sent 0 failed
QueryDirectories: 0 sent 63 failed

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fix reset of bytes read and written stats

[ Upstream commit c281bc0c7412308c7ec0888904f7c99353da4796 ]

echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats
but there were four (see example below) that were not reset
(bytes read and witten, total vfs ops and max ops
at one time).

...
0 session 0 share reconnects
Total vfs operations: 100 maximum at one time: 2

1) \\localhost\test
SMBs: 0
Bytes read: 502092  Bytes written: 31457286
TreeConnects: 0 total 0 failed
TreeDisconnects: 0 total 0 failed
...

This patch fixes cifs_stats_proc_write to properly reset
those four.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfq: Suppress compiler warnings about comparisons

[ Upstream commit f7ecb1b109da1006a08d5675debe60990e824432 ]

This patch does not change any functionality but avoids that gcc
reports the following warnings when building with W=1:

block/cfq-iosched.c: In function ?cfq_back_seek_max_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (__data < (MIN))      \
             ^
block/cfq-iosched.c:4756:1: note: in expansion of macro ?STORE_FUNCTION?
 STORE_FUNCTION(cfq_back_seek_max_store, &cfqd->cfq_back_max, 0, UINT_MAX, 0);
 ^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_slice_idle_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (__data < (MIN))      \
             ^
block/cfq-iosched.c:4759:1: note: in expansion of macro ?STORE_FUNCTION?
 STORE_FUNCTION(cfq_slice_idle_store, &cfqd->cfq_slice_idle, 0, UINT_MAX, 1);
 ^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_group_idle_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (__data < (MIN))      \
             ^
block/cfq-iosched.c:4760:1: note: in expansion of macro ?STORE_FUNCTION?
 STORE_FUNCTION(cfq_group_idle_store, &cfqd->cfq_group_idle, 0, UINT_MAX, 1);
 ^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_low_latency_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (__data < (MIN))      \
             ^
block/cfq-iosched.c:4765:1: note: in expansion of macro ?STORE_FUNCTION?
 STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
 ^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_slice_idle_us_store?:
block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (__data < (MIN))      \
             ^
block/cfq-iosched.c:4782:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
 USEC_STORE_FUNCTION(cfq_slice_idle_us_store, &cfqd->cfq_slice_idle, 0, UINT_MAX);
 ^~~~~~~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_group_idle_us_store?:
block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (__data < (MIN))      \
             ^
block/cfq-iosched.c:4783:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
 USEC_STORE_FUNCTION(cfq_group_idle_us_store, &cfqd->cfq_group_idle, 0, UINT_MAX);
 ^~~~~~~~~~~~~~~~~~~

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDS: IB: fix 'passing zero to ERR_PTR()' warning

[ Upstream commit 5941923da29e84bc9e2a1abb2c14fffaf8d71e2f ]

Fix a static code checker warning:
 net/rds/ib_frmr.c:82 rds_ib_alloc_frmr() warn: passing zero to 'ERR_PTR'

The error path for ib_alloc_mr failure should set err to PTR_ERR.

Fixes: 1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/powerpc: Kill child processes on SIGINT

[ Upstream commit 7c27a26e1ed5a7dd709aa19685d2c98f64e1cf0c ]

There are some powerpc selftests, as tm/tm-unavailable, that run for a long
period (>120 seconds), and if it is interrupted, as pressing CRTL-C
(SIGINT), the foreground process (harness) dies but the child process and
threads continue to execute (with PPID = 1 now) in background.

In this case, you'd think the whole test exited, but there are remaining
threads and processes being executed in background. Sometimes these
zombies processes are doing annoying things, as consuming the whole CPU or
dumping things to STDOUT.

This patch fixes this problem by attaching an empty signal handler to
SIGINT in the harness process. This handler will interrupt (EINTR) the
parent process waitpid() call, letting the code to follow through the
normal flow, which will kill all the processes in the child process group.

This patch also fixes a typo.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/omap: Fix cache flushes on L2 table entries

[ Upstream commit 04c532a1cdc7e423656c07937aa4b5c1c2b064f9 ]

The base address used for DMA operations on the second-level table
did incorrectly include the offset for the table entry. The offset
was then added again which lead to incorrect behavior.

Operations on the L1 table are not affected.

The calculation of the base address is changed to point to the
beginning of the L2 table.

Fixes: bfee0cf0ee1d ("iommu/omap: Use DMA-API for performing cache flushes")
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ralf Goebel <ralf.goebel@imago-technologies.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5677: Fix initialization of rt5677_of_match.data

[ Upstream commit f861e3e28a3016a2064d9f600eaa92a530b732b4 ]

The driver expects to find the device id in rt5677_of_match.data, however
it is currently assigned to rt5677_of_match.type. Fix this.

The problem was found with the help of clang:
  sound/soc/codecs/rt5677.c:5010:36: warning: expression which evaluates to
  zero treated as a null pointer constant of type 'const void *'
  [-Wnon-literal-null-conversion]
    { .compatible = "realtek,rt5677", RT5677 },
                                      ^~~~~~

Fixes: ddc9e69b9dc2 ("ASoC: rt5677: Hide platform data in the module sources")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix subdevice flags for PFI subdevice

[ Upstream commit e083926b3e269d4064825dcf2ad50c636fddf8cf ]

The PFI subdevice flags indicate that the subdevice is readable and
writeable, but that is only true for the supported "M-series" boards,
not the older "E-series" boards.  Only set the SDF_READABLE and
SDF_WRITABLE subdevice flags for the M-series boards.  These two flags
are mainly for informational purposes.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm kcopyd: avoid softlockup in run_complete_job

[ Upstream commit 784c9a29e99eb40b842c29ecf1cc3a79e00fb629 ]

It was reported that softlockups occur when using dm-snapshot ontop of
slow (rbd) storage.  E.g.:

[ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177]
...
[ 4048.034151] Workqueue: kcopyd do_work [dm_mod]
[ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot]
...
[ 4048.034190] Call Trace:
[ 4048.034196]  ? __chunk_is_tracked+0x70/0x70 [dm_snapshot]
[ 4048.034200]  run_complete_job+0x5f/0xb0 [dm_mod]
[ 4048.034205]  process_jobs+0x91/0x220 [dm_mod]
[ 4048.034210]  ? kcopyd_put_pages+0x40/0x40 [dm_mod]
[ 4048.034214]  do_work+0x46/0xa0 [dm_mod]
[ 4048.034219]  process_one_work+0x171/0x370
[ 4048.034221]  worker_thread+0x1fc/0x3f0
[ 4048.034224]  kthread+0xf8/0x130
[ 4048.034226]  ? max_active_store+0x80/0x80
[ 4048.034227]  ? kthread_bind+0x10/0x10
[ 4048.034231]  ret_from_fork+0x35/0x40
[ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks

Fix this by calling cond_resched() after run_complete_job()'s callout to
the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above
trace).

Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: mvebu: Fix I/O space end address calculation

[ Upstream commit dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ]

pcie->realio.end should be the address of last byte of the area,
therefore using resource_size() of another resource is not correct, we
must substract 1 to get the address of the last byte.

Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: fix balloon initialization for PVH Dom0

[ Upstream commit 3596924a233e45aa918c961a902170fc4916461b ]

The current balloon code tries to calculate a delta factor for the
balloon target when running in HVM mode in order to account for memory
used by the firmware.

This workaround for memory accounting doesn't work properly on a PVH
Dom0, that has a static-max value different from the target value even
at startup. Note that this is not a problem for DomUs because guests are
started with a static-max value that matches the amount of RAM in the
memory map.

Fix this by forcefully setting target_diff for Dom0, regardless of
it's mode.

Reported-by: Gabriel Bercarug <bercarug@amazon.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: do not use WARN() in input_alloc_absinfo()

[ Upstream commit 100294cee9a98bfd4d6cb2d1c8a8aef0e959b0c4 ]

Some of fuzzers set panic_on_warn=1 so that they can handle WARN()ings
the same way they handle full-blown kernel crashes. We used WARN() in
input_alloc_absinfo() to get a better idea where memory allocation
failed, but since then kmalloc() and friends started dumping call stack on
memory allocation failures anyway, so we are not getting anything extra
from WARN().

Because of the above, let's replace WARN with dev_err(). We use dev_err()
instead of simply removing message and relying on kcalloc() to give us
stack dump so that we'd know the instance of hardware device to which we
were trying to attach input device.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix error handling in nfs4_sp4_select_mode()

[ Upstream commit 72bf75cfc00c02aa66ef6133048f37aa5d88825c ]

Error code is set in the error handling cases but never used. Fix it.

Fixes: 937e3133cd0b ("NFSv4.1: Ensure we clear the SP4_MACH_CRED flags in nfs4_sp4_select_mode()")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aic94xx: fix an error code in aic94xx_init()

[ Upstream commit 0756c57bce3d26da2592d834d8910b6887021701 ]

We accidentally return success instead of -ENOMEM on this error path.

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / scan: Initialize status to ACPI_STA_DEFAULT

[ Upstream commit 5971b0c1594d6c34e257101ed5fdffec65205c50 ]

Since commit 63347db0affa "ACPI / scan: Use acpi_bus_get_status() to
initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices
gets set to 0 by acpi_bus_type_and_status() and filled with its actual
value later when acpi_add_single_object() calls acpi_bus_get_status().

This means that any acpi_match_device_ids() calls in between will always
fail with -ENOENT.

We already have a workaround for this, which temporary forces status to
ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present()
and the next commit in this series adds another acpi_match_device_ids()
call between status being initialized as 0 and the acpi_bus_get_status()
call.

Rather then adding another workaround, this commit makes
acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is
safe to do as the only code looking at status between the initialization
and the acpi_bus_get_status() call is those acpi_match_device_ids() calls.

Note this does mean that we need to (re)set status to 0 in case the
acpi_bus_get_status() call fails.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix panic for failed online processing

[ Upstream commit 7c6553d4db03350dad0110c3224194c19df76a8f ]

Fix a panic that occurs for a device that got an error in
dasd_eckd_check_characteristics() during online processing.
For example the read configuration data command may have failed.

If this error occurs the device is not being set online and the earlier
invoked steps during online processing are rolled back. Therefore
dasd_eckd_uncheck_device() is called which needs a valid private
structure. But this pointer is not valid if
dasd_eckd_check_characteristics() has failed.

Check for a valid device->private pointer to prevent a panic.

Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix hanging offline processing due to canceled worker

[ Upstream commit 669f3765b755fd8739ab46ce3a9c6292ce8b3d2a ]

During offline processing two worker threads are canceled without
freeing the device reference which leads to a hanging offline process.

Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: bvec_nr_vecs() returns value for wrong slab

[ Upstream commit d6c02a9beb67f13d5f14f23e72fa9981e8b84477 ]

In commit ed996a52c868 ("block: simplify and cleanup bvec pool
handling"), the value of the slab index is incremented by one in
bvec_alloc() after the allocation is done to indicate an index value of
0 does not need to be later freed.

bvec_nr_vecs() was not updated accordingly, and thus returns the wrong
value.  Decrement idx before performing the lookup.

Fixes: ed996a52c868 ("block: simplify and cleanup bvec pool handling")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe powerpc: Fix trace event post-processing

[ Upstream commit 354b064b8ebc1e1ede58550ca9e08bfa81e6af43 ]

In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.

During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location.  In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.

This can be verified on a powerpc64le system as shown below.

  $ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
  ...
  c000000000414290 T __se_sys_open
  c000000000414290 T sys_open

  $ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"

  c000000000414290 <__se_sys_open>:
  c000000000414290:       19 01 4c 3c     addis   r2,r12,281
  c000000000414294:       70 c4 42 38     addi    r2,r2,-15248
  c000000000414298:       a6 02 08 7c     mflr    r0
  c00000000041429c:       e8 ff a1 fb     std     r29,-24(r1)
  c0000000004142a0:       f0 ff c1 fb     std     r30,-16(r1)
  c0000000004142a4:       f8 ff e1 fb     std     r31,-8(r1)
  c0000000004142a8:       10 00 01 f8     std     r0,16(r1)
  c0000000004142ac:       c1 ff 21 f8     stdu    r1,-64(r1)
  c0000000004142b0:       78 23 9f 7c     mr      r31,r4
  c0000000004142b4:       78 1b 7e 7c     mr      r30,r3

  For both the entry probe and the return probe, the probe location
  should be _text+4276888 (0xc000000000414298). Since another alias
  exists for 'sys_open', the post-processing code will end up adding
  the offset (8 for powerpc64le) twice and perf will attempt to add
  the probe at _text+4276896 (0xc0000000004142a0) instead.

Before:

  # perf probe -v -a sys_open

  probe-definition(0): sys_open
  symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Writing event: p:probe/sys_open _text+4276896
  Added new event:
    probe:sys_open       (on sys_open)
  ...

  # perf probe -v -a sys_open%return $retval

  probe-definition(0): sys_open%return
  symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/README write=0
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Parsing probe_events: p:probe/sys_open _text+4276896
  Group:probe Event:sys_open probe:p
  Writing event: r:probe/sys_open__return _text+4276896
  Failed to write event: Invalid argument
    Error: Failed to add events. Reason: Invalid argument (Code: -22)

After:

  # perf probe -v -a sys_open

  probe-definition(0): sys_open
  symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Writing event: p:probe/sys_open _text+4276888
  Added new event:
    probe:sys_open       (on sys_open)
  ...

  # perf probe -v -a sys_open%return $retval

  probe-definition(0): sys_open%return
  symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (8 entries long)
  Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Symbol sys_open address found : c000000000414290
  Matched function: __se_sys_open [2ad03a0]
  Probe point found: __se_sys_open+0
  Found 1 probe_trace_events.
  Opening /sys/kernel/debug/tracing/README write=0
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Parsing probe_events: p:probe/sys_open _text+4276888
  Group:probe Event:sys_open probe:p
  Writing event: r:probe/sys_open__return _text+4276888
  Added new event:
    probe:sys_open__return (on sys_open%return)
  ...

Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 99e608b5954c ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix size calculation using resource_size()

[ Upstream commit c42d3be0c06f0c1c416054022aa535c08a1f9b39 ]

The problem is the the calculation should be "end - start + 1" but the
plus one is missing in this calculation.

Fixes: 8626816e905e ("powerpc: add support for MPIC message register API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/uaccess: Enable get_user(u64, *p) on 32-bit

[ Upstream commit f7a6947cd49b7ff4e03f1b4f7e7b223003d752ca ]

Currently if you build a 32-bit powerpc kernel and use get_user() to
load a u64 value it will fail to build with eg:

  kernel/rseq.o: In function `rseq_get_rseq_cs':
  kernel/rseq.c:123: undefined reference to `__get_user_bad'

This is hitting the check in __get_user_size() that makes sure the
size we're copying doesn't exceed the size of the destination:

  #define __get_user_size(x, ptr, size, retval)
  do {
   retval = 0;
   __chk_user_ptr(ptr);
   if (size > sizeof(x))
   (x) = __get_user_bad();

Which doesn't immediately make sense because the size of the
destination is u64, but it's not really, because __get_user_check()
etc. internally create an unsigned long and copy into that:

  #define __get_user_check(x, ptr, size)
  ({
   long __gu_err = -EFAULT;
   unsigned long  __gu_val = 0;

The problem being that on 32-bit unsigned long is not big enough to
hold a u64. We can fix this with a trick from hpa in the x86 code, we
statically check the type of x and set the type of __gu_val to either
unsigned long or unsigned long long.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to clear PG_checked flag in set_page_dirty()

[ Upstream commit 66110abc4c931f879d70e83e1281f891699364bf ]

PG_checked flag will be set on data page during GC, later, we can
recognize such page by the flag and migrate page to cold segment.

But previously, we don't clear this flag when invalidating data page,
after page redirtying, we will write it into wrong log.

Let's clear PG_checked flag in set_page_dirty() to avoid this.

Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/9p: fix error path of p9_virtio_probe

[ Upstream commit 92aef4675d5b1b55404e1532379e343bed0e5cf2 ]

Currently when virtio_find_single_vq fails, we go through del_vqs which
throws a warning (Trying to free already-free IRQ).  Skip del_vqs if vq
allocation failed.

Link: http://lkml.kernel.org/r/20180524101021.49880-1-jean-philippe.brucker@arm.com
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/9p/trans_fd.c: fix race by holding the lock

[ Upstream commit 9f476d7c540cb57556d3cc7e78704e6cd5100f5f ]

It may be possible to run p9_fd_cancel() with a deleted req->req_list
and incur in a double del. To fix hold the client->lock while changing
the status, so the other threads will be synchronized.

Link: http://lkml.kernel.org/r/20180723184253.6682-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+735d926e9d1317c3310c@syzkaller.appspotmail.com
To: Eric Van Hensbergen <ericvh@gmail.com>
To: Ron Minnich <rminnich@sandia.gov>
To: Latchesar Ionkov <lucho@ionkov.net>
Cc: Yiwen Jiang <jiangyiwen@huwei.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP

[ Upstream commit 0702bc4d2fe793018ad9aa0eb14bff7f526c4095 ]

When compiling bmips with SMP disabled, the build fails with:

drivers/irqchip/irq-bcm7038-l1.o: In function `bcm7038_l1_cpu_offline':
drivers/irqchip/irq-bcm7038-l1.c:242: undefined reference to `irq_set_affinity_locked'
make[5]: *** [vmlinux] Error 1

Fix this by adding and setting bcm7038_l1_cpu_offline only when actually
compiling for SMP. It wouldn't have been used anyway, as it requires
CPU_HOTPLUG, which in turn requires SMP.

Fixes: 34c535793bcb ("irqchip/bcm7038-l1: Implement irq_cpu_offline() callback")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Check for null when copying nsinfo.

[ Upstream commit 3f4417d693b43fa240ac8bde4487f67745ca23d8 ]

The argument to nsinfo__copy() was assumed to be valid, but some code paths
exist that will lead to NULL being passed.

In particular, running 'perf script -D' on a perf.data file containing an
PERF_RECORD_MMAP event associating the '[vdso]' dso with pid 0 earlier in
the event stream will lead to a segfault.

Since all calling code is already checking for a non-null return value,
just return NULL for this case as well.

Signed-off-by: Benno Evers <bevers@mesosphere.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180810133614.9925-1-bevers@mesosphere.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: Fix for phy link issue when using marvell phy driver

[ Upstream commit 60081dcc4fce385ade26d3145b2479789df0b7e5 ]

For marvell phy m88e1510, bit SUPPORTED_FIBRE of phydev->supported
is default on. Both phy_resume() and phy_suspend() will check the
SUPPORTED_FIBRE bit and write register of fibre page.

Currently in hns3 driver, the SUPPORTED_FIBRE bit will be cleared
after phy_connect_direct() finished. Because phy_resume() is called
in phy_connect_direct(), and phy_suspend() is called when disconnect
phy device, so the operation for fibre page register is not symmetrical.
It will cause phy link issue when reload hns3 driver.

This patch fixes it by disable the SUPPORTED_FIBRE before connecting
phy.

Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero

[ Upstream commit 6c39d5278e62956238a681e4cfc69fae5507fc57 ]

According to the functional specification of hardware, the first
descriptor of response from command 'lookup vlan talbe' is not valid.
Currently, the first descriptor is parsed as normal value, which will
cause an expected error.

This patch fixes this problem by skipping the first descriptor.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hns: Fix usage of bitmap allocation functions return values

[ Upstream commit a1ceeca679dccc492235f0f629d9e9f7b3d51ca8 ]

hns bitmap allocation functions return 0 on success and -1 on failure.
Callers of these functions wrongly used their return value as an errno,
fix that by making a proper conversion.

Fixes: a598c6f4c5a8 ("IB/hns: Simplify function of pd alloc and qp alloc")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp, ulp: add alias for all ulp modules

[ Upstream commit 037b0b86ecf5646f8eae777d8b52ff8b401692ec ]

Lets not turn the TCP ULP lookup into an arbitrary module loader as
we only intend to load ULP modules through this mechanism, not other
unrelated kernel modules:

  [root@bar]# cat foo.c
  #include <sys/types.h>
  #include <sys/socket.h>
  #include <linux/tcp.h>
  #include <linux/in.h>

  int main(void)
  {
      int sock = socket(PF_INET, SOCK_STREAM, 0);
      setsockopt(sock, IPPROTO_TCP, TCP_ULP, "sctp", sizeof("sctp"));
      return 0;
  }

  [root@bar]# gcc foo.c -O2 -Wall
  [root@bar]# lsmod | grep sctp
  [root@bar]# ./a.out
  [root@bar]# lsmod | grep sctp
  sctp                 1077248  4
  libcrc32c              16384  3 nf_conntrack,nf_nat,sctp
  [root@bar]#

Fix it by adding module alias to TCP ULP modules, so probing module
via request_module() will be limited to tcp-ulp-[name]. The existing
modules like kTLS will load fine given tcp-ulp-tls alias, but others
will fail to load:

  [root@bar]# lsmod | grep sctp
  [root@bar]# ./a.out
  [root@bar]# lsmod | grep sctp
  [root@bar]#

Sockmap is not affected from this since it's either built-in or not.

Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: fix memory leaks on netlink_dump_start error

[ Upstream commit 3e673b23b541b8e7f773b2d378d6eb99831741cd ]

Shaochun Chen points out we leak dumper filter state allocations
stored in dump_control->data in case there is an error before netlink sets
cb_running (after which ->done will be called at some point).

In order to fix this, add .start functions and move allocations there.

Same pattern as used in commit 90fd131afc565159c9e0ea742f082b337e10f8c6
("netfilter: nf_tables: move dumper state allocation into ->start").

Reported-by: shaochun chen <cscnull@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360

[ Upstream commit 880b29ac107d15644bf4da228376ba3cd6af6d71 ]

Add entry to WMI keymap for lid flip event on Asus UX360.

On Asus Zenbook ux360 flipping lid from/to tablet mode triggers
keyscan code 0xfa which cannot be handled and results in kernel
log message "Unknown key fa pressed".

Signed-off-by: Aleh Filipovich<aleh@appnexus.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: sm501: Set coherent_dma_mask when creating subdevices

[ Upstream commit 2f606da78230f09cf1a71fde6ee91d0c710fa2b2 ]

Instantiating the sm501 OHCI subdevice results in a kernel warning.

sm501-usb sm501-usb: SM501 OHCI
sm501-usb sm501-usb: new USB bus registered, assigned bus number 1
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516
ohci_init+0x194/0x2d8
Modules linked in:

CPU: 0 PID: 1 Comm: swapper Tainted: G        W
4.18.0-rc7-00178-g0b5b1f9a78b5 #1
PC is at ohci_init+0x194/0x2d8
PR is at ohci_init+0x168/0x2d8
PC  : 8c27844c SP  : 8f81dd94 SR  : 40008001
TEA : 29613060
R0  : 00000000 R1  : 00000000 R2  : 00000000 R3  : 00000202
R4  : 8fa98b88 R5  : 8c277e68 R6  : 00000000 R7  : 00000000
R8  : 8f965814 R9  : 8c388100 R10 : 8fa98800 R11 : 8fa98928
R12 : 8c48302c R13 : 8fa98920 R14 : 8c48302c
MACH: 00000096 MACL: 0000017c GBR : 00000000 PR  : 8c278420

Call trace:
 [<(ptrval)>] usb_add_hcd+0x1e8/0x6ec
 [<(ptrval)>] _dev_info+0x0/0x54
 [<(ptrval)>] arch_local_save_flags+0x0/0x8
 [<(ptrval)>] arch_local_irq_restore+0x0/0x24
 [<(ptrval)>] ohci_hcd_sm501_drv_probe+0x114/0x2d8
...

Initialize coherent_dma_mask when creating SM501 subdevices to fix
the problem.

Fixes: b6d6454fdb66f ("mfd: SM501 core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: fix race between ip_vs_conn_new() and ip_vs_del_dest()

[ Upstream commit a53b42c11815d2357e31a9403ae3950517525894 ]

We came across infinite loop in ipvs when using ipvs in docker
env.

When ipvs receives new packets and cannot find an ipvs connection,
it will create a new connection, then if the dest is unavailable
(i.e. IP_VS_DEST_F_AVAILABLE), the packet will be dropped sliently.

But if the dropped packet is the first packet of this connection,
the connection control timer never has a chance to start and the
ipvs connection cannot be released. This will lead to memory leak, or
infinite loop in cleanup_net() when net namespace is released like
this:

    ip_vs_conn_net_cleanup at ffffffffa0a9f31a [ip_vs]
    __ip_vs_cleanup at ffffffffa0a9f60a [ip_vs]
    ops_exit_list at ffffffff81567a49
    cleanup_net at ffffffff81568b40
    process_one_work at ffffffff810a851b
    worker_thread at ffffffff810a9356
    kthread at ffffffff810b0b6f
    ret_from_fork at ffffffff81697a18

race condition:
    CPU1                           CPU2
    ip_vs_in()
      ip_vs_conn_new()
                                   ip_vs_del_dest()
                                     __ip_vs_unlink_dest()
                                       ~IP_VS_DEST_F_AVAILABLE
      cp->dest && !IP_VS_DEST_F_AVAILABLE
      __ip_vs_conn_put
    ...
    cleanup_net  ---> infinite looping

Fix this by checking whether the timer already started.

Signed-off-by: Tan Hu <tan.hu@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kdump: Fix memleak in nt_vmcoreinfo

[ Upstream commit 2d2e7075b87181ed0c675e4936e20bdadba02e1f ]

The vmcoreinfo of a crashed system is potentially fragmented. Thus the
crash kernel has an intermediate step where the vmcoreinfo is copied into a
temporary, continuous buffer in the crash kernel memory. This temporary
buffer is never freed. Free it now to prevent the memleak.

While at it replace all occurrences of "VMCOREINFO" by its corresponding
macro to prevent potential renaming issues.

Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ip6t_rpfilter: set F_IFACE for linklocal addresses

[ Upstream commit da786717e0894886301ed2536843c13f9e8fd53e ]

Roman reports that DHCPv6 client no longer sees replies from server
due to

ip6tables -t raw -A PREROUTING -m rpfilter --invert -j DROP

rule.  We need to set the F_IFACE flag for linklocal addresses, they
are scoped per-device.

Fixes: 47b7e7f82802 ("netfilter: don't set F_IFACE on ipv6 fib lookups")
Reported-by: Roman Mamedov <rm@romanrm.net>
Tested-by: Roman Mamedov <rm@romanrm.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: intel_punit_ipc: fix build errors

[ Upstream commit 340fd4cff43f18bace9358d4decdc9b6ed0715be ]

Fix build errors by #including <linux/io.h>.

../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_read_status':
../drivers/platform/x86/intel_punit_ipc.c:55:2: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration]
  return readl(ipcdev->base[type][BASE_IFACE]);
../drivers/platform/x86/intel_punit_ipc.c: In function 'ipc_write_cmd':
../drivers/platform/x86/intel_punit_ipc.c:60:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]
  writel(cmd, ipcdev->base[type][BASE_IFACE]);

Fixes: 447ae3166702 ("x86: Don't include linux/irq.h from asm/hardirq.h")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zha Qipeng <qipeng.zha@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/dcache.c: fix kmemcheck splat at take_dentry_name_snapshot()

[ Upstream commit 6cd00a01f0c1ae6a852b09c59b8dd55cc6c35d1d ]

Since only dentry->d_name.len + 1 bytes out of DNAME_INLINE_LEN bytes
are initialized at __d_alloc(), we can't copy the whole size
unconditionally.

 WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff8fa27465ac50)
 636f6e66696766732e746d70000000000010000000000000020000000188ffff
  i i i i i i i i i i i i i u u u u u u u u u u i i i i i u u u u
                                  ^
 RIP: 0010:take_dentry_name_snapshot+0x28/0x50
 RSP: 0018:ffffa83000f5bdf8 EFLAGS: 00010246
 RAX: 0000000000000020 RBX: ffff8fa274b20550 RCX: 0000000000000002
 RDX: ffffa83000f5be40 RSI: ffff8fa27465ac50 RDI: ffffa83000f5be60
 RBP: ffffa83000f5bdf8 R08: ffffa83000f5be48 R09: 0000000000000001
 R10: ffff8fa27465ac00 R11: ffff8fa27465acc0 R12: ffff8fa27465ac00
 R13: ffff8fa27465acc0 R14: 0000000000000000 R15: 0000000000000000
 FS:  00007f79737ac8c0(0000) GS:ffffffff8fc30000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffff8fa274c0b000 CR3: 0000000134aa7002 CR4: 00000000000606f0
  take_dentry_name_snapshot+0x28/0x50
  vfs_rename+0x128/0x870
  SyS_rename+0x3b2/0x3d0
  entry_SYSCALL_64_fastpath+0x1a/0xa4
  0xffffffffffffffff

Link: http://lkml.kernel.org/r/201709131912.GBG39012.QMJLOVFSFFOOtH@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/fadvise.c: fix signed overflow UBSAN complaint

[ Upstream commit a718e28f538441a3b6612da9ff226973376cdf0f ]

Signed integer overflow is undefined according to the C standard.  The
overflow in ksys_fadvise64_64() is deliberate, but since it is signed
overflow, UBSAN complains:

UBSAN: Undefined behaviour in mm/fadvise.c:76:10
signed integer overflow:
4 + 9223372036854775805 cannot be represented in type 'long long int'

Use unsigned types to do math.  Unsigned overflow is defined so UBSAN
will not complain about it.  This patch doesn't change generated code.

[akpm@linux-foundation.org: add comment explaining the casts]
Link: http://lkml.kernel.org/r/20180629184453.7614-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: <icytxw@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pwm: meson: Fix mux clock names

[ Upstream commit b96e9eb62841c519ba1db32d036628be3cdef91f ]

Current clock name looks like this:
/soc/bus@ffd00000/pwm@1b000#mux0

This is bad because CCF uses the clock to create a directory in clk debugfs.
With such name, the directory creation (silently) fails and the debugfs
entry end up being created at the debugfs root.

With this change, the clock name will now be:
ffd1b000.pwm#mux0

This matches the clock naming scheme used in the ethernet and mmc driver.
It also fixes the problem with debugfs.

Fixes: 36af66a79056 ("pwm: Convert to using %pOF instead of full_name")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Invalid NUMA node information can cause a divide by zero

[ Upstream commit c513de490f808d8480346f9a58e6a4a5f3de12e7 ]

If the system BIOS does not supply NUMA node information to the
PCI devices, the NUMA node is selected by choosing the current
node.

This can lead to the following crash:

divide error: 0000 SMP
CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G          IOE
------------   3.10.0-693.21.1.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS
SE5C610.86B.01.01.0005.101720141054 10/17/2014
Workqueue: events work_for_cpu_fn
task: ffff880174480fd0 ti: ffff880174488000 task.ti: ffff880174488000
RIP: 0010: [<ffffffffc020ac69>] hfi1_dev_affinity_init+0x129/0x6a0 [hfi1]
RSP: 0018:ffff88017448bbf8  EFLAGS: 00010246
RAX: 0000000000000011 RBX: ffff88107ffba6c0 RCX: ffff88085c22e130
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880824ad0000
RBP: ffff88017448bc48 R08: 0000000000000011 R09: 0000000000000002
R10: ffff8808582b6ca0 R11: 0000000000003151 R12: ffff8808582b6ca0
R13: ffff8808582b6518 R14: ffff8808582b6010 R15: 0000000000000012
FS:  0000000000000000(0000) GS:ffff88085ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efc707404f0 CR3: 0000000001a02000 CR4: 00000000001607f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
 hfi1_init_dd+0x14b3/0x27a0 [hfi1]
 ? pcie_capability_write_word+0x46/0x70
 ? hfi1_pcie_init+0xc0/0x200 [hfi1]
 do_init_one+0x153/0x4c0 [hfi1]
 ? sched_clock_cpu+0x85/0xc0
 init_one+0x1b5/0x260 [hfi1]
 local_pci_probe+0x4a/0xb0
 work_for_cpu_fn+0x1a/0x30
 process_one_work+0x17f/0x440
 worker_thread+0x278/0x3c0
 ? manage_workers.isra.24+0x2a0/0x2a0
 kthread+0xd1/0xe0
 ? insert_kthread_work+0x40/0x40
 ret_from_fork+0x77/0xb0
 ? insert_kthread_work+0x40/0x40

If the BIOS is not supplying NUMA information:
  - set the default table count to 1 for all possible nodes
  - select node 0 (instead of current NUMA) node to get consistent
    performance
  - generate an error indicating that the BIOS should be upgraded

Reviewed-by: Gary Leshner <gary.s.leshner@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Add notifier_block forward declaration

[ Upstream commit 704ae091b061082b37a9968621af4c290c641d50 ]

Without linux/irq.h, there is no declaration of notifier_block, leading to
a build warning:

In file included from arch/x86/kernel/cpu/mcheck/threshold.c:10:
arch/x86/include/asm/mce.h:151:46: error: 'struct notifier_block' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]

It's sufficient to declare the struct tag here, which avoids pulling in
more header files.

Fixes: 447ae3166702 ("x86: Don't include linux/irq.h from asm/hardirq.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicolai Stange <nstange@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20180817100156.3009043-1-arnd@arndb.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio: pci-legacy: Validate queue pfn

[ Upstream commit 69599206ea9a3f8f2e94d46580579cbf9d08ad6c ]

Legacy PCI over virtio uses a 32bit PFN for the queue. If the
queue pfn is too large to fit in 32bits, which we could hit on
arm64 systems with 52bit physical addresses (even with 64K page
size), we simply miss out a proper link to the other side of
the queue.

Add a check to validate the PFN, rather than silently breaking
the devices.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Cc: Peter Maydel <peter.maydell@linaro.org>
Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: modpost: check memory allocation results

[ Upstream commit 1f3aa9002dc6a0d59a4b599b4fc8f01cf43ef014 ]

Fix missing error check for memory allocation functions in
scripts/mod/modpost.c.

Fixes kernel bugzilla #200319:
https://bugzilla.kernel.org/show_bug.cgi?id=200319

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yuexing Wang <wangyxlandq@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>