smsx95xx: fix crimes against truesize

smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings.

This patch stops smsc95xx from changing truesize.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>

Revert "mailbox: avoid timer start from callback"

This reverts commit c7dacf5b0f32957b24ef29df1207dc2cd8307743.

The Pi 400 shutdown/poweroff mechanism relies on being able to set
a GPIO on the expander in the pm_power_off handler, something that
requires two mailbox calls - GET_GPIO_STATE and SET_GPIO_STATE. A
recent kernel change introduces a reasonable possibility that the
GET call doesn't completes, and bisecting led to a commit from
October that changes the timer usage of the mailbox.

My theory is that there is a race condition in the new code that breaks
the poll timer, but that it normally goes unnoticed because subsequent
mailbox activity wakes it up again. The power-off mailbox calls happen
at a time when other subsystems have been shut down, so if one of them
fails then there is nothing to allow it to recover.

See: https://github.com/raspberrypi/linux/issues/3941

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"

This reverts commit 83b2a8fe43bda0c11981ad6afa5dd0104d78be28.

Revert "staging: bcm2835-audio: Drop DT dependency"

This reverts commit b7491a9fca2dc2535b9dc922550a37c5baae9d3d.

Revert "rtc: pcf8523: properly handle oscillator stop bit"

This reverts commit ede44c908d44b166a5b6bd7caacd105c2ff5a70f.

See: https://github.com/raspberrypi/firmware/issues/1065

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65

* Re-expose some dmi APIs for use in VCSM

Linux 5.10.11

Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126094313.589480033@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mm: fix initialization of struct page for holes in memory layout"

commit 377bf660d07a47269510435d11f3b65d53edca20 upstream.

This reverts commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399.

Chris Wilson reports that it causes boot problems:

 "We have half a dozen or so different machines in CI that are silently
  failing to boot, that we believe is bisected to this patch"

and the CI team confirmed that a revert fixed the issues.

The cause is unknown for now, so let's revert it.

Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix initialization of struct page for holes in memory layout

commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399 upstream.

There could be struct pages that are not backed by actual physical
memory.  This can happen when the actual memory bank is not a multiple
of SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.

Such pages are currently initialized using init_unavailable_mem()
function that iterates through PFNs in holes in memblock.memory and if
there is a struct page corresponding to a PFN, the fields if this page
are set to default values and the page is marked as Reserved.

init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.

On a system that has firmware reserved holes in a zone above ZONE_DMA,
for instance in a configuration below:

# grep -A1 E820 /proc/iomem
7a17b000-7a216fff : Unknown E820 type
7a217000-7bffffff : System RAM

unset zone link in struct page will trigger

VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);

because there are pages in both ZONE_DMA32 and ZONE_DMA (unset zone link
in struct page) in the same pageblock.

Update init_unavailable_mem() to use zone constraints defined by an
architecture to properly setup the zone link and use node ID of the
adjacent range in memblock.memory to set the node link.

Link: https://lkml.kernel.org/r/20210111194017.22696-3-rppt@kernel.org
Fixes: 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 9bb48c82aced ("tty: implement write_iter") converted the tty layer to use write_iter. Fix the redirected_tty_write declaration also in n_tty and change the comparisons to use write_iter instead of write. also in n_tty and change the comparisons to use write_iter instead of write.

commit 9f12e37cae44a96132fc3031535a0b165486941a upstream.

[ Also moved the declaration of redirected_tty_write() to the proper
  location in a header file. The reason for the bug was the bogus extern
  declaration in n_tty.c silently not matching the changed definition in
  tty_io.c, and because it wasn't in a shared header file, there was no
  cross-checking of the declaration.

  Sami noticed because Clang's Control Flow Integrity checking ended up
  incidentally noticing the inconsistent declaration.    - Linus ]

Fixes: 9bb48c82aced ("tty: implement write_iter")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/pipe: allow sendfile() to pipe again

commit f8ad8187c3b536ee2b10502a8340c014204a1af0 upstream.

After commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") sendfile() could no longer send data
from a real file to a pipe, breaking for example certain cgit
setups (e.g. when running behind fcgiwrap), because in this
case cgit will try to do exactly this: sendfile() to a pipe.

Fix this by using iter_file_splice_write for the splice_write
method of pipes, as suggested by Christoph.

Cc: stable@vger.kernel.org
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: imx8mq: Use icc_sync_state

commit 67288f74d4837b82ef937170da3389b0779c17be upstream.

Add the icc_sync_state callback to notify the framework when consumers
are probed and the bandwidth doesn't have to be kept at maximum anymore.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Suggested-by: Georgi Djakov <georgi.djakov@linaro.org>
Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state")
Link: https://lore.kernel.org/r/20201210100906.18205-6-martin.kepplinger@puri.sm
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: wire up ->splice_read and ->splice_write

commit f2d6c2708bd84ca953fa6b6ca5717e79eb0140c7 upstream.

Wire up the splice_read and splice_write methods to the default
helpers using ->read_iter and ->write_iter now that those are
implemented for kernfs.  This restores support to use splice and
sendfile on kernfs files.

Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Reported-by: Siddharth Gupta <sidgup@codeaurora.org>
Tested-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-4-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: implement ->write_iter

commit cc099e0b399889c6485c88368b19824b087c9f8c upstream.

Switch kernfs to implement the write_iter method instead of plain old
write to prepare to supporting splice and sendfile again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-3-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: implement ->read_iter

commit 4eaad21a6ac9865df7f31983232ed5928450458d upstream.

Switch kernfs to implement the read_iter method instead of plain old
read to prepare to supporting splice and sendfile again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Local storage helpers should check nullness of owner ptr passed

commit 1a9c72ad4c26821e215a396167c14959cf24a7f1 upstream.

The verifier allows ARG_PTR_TO_BTF_ID helper arguments to be NULL, so
helper implementations need to check this before dereferencing them.
This was already fixed for the socket storage helpers but not for task
and inode.

The issue can be reproduced by attaching an LSM program to
inode_rename hook (called when moving files) which tries to get the
inode of the new file without checking for its nullness and then trying
to move an existing file to a new path:

  mv existing_file new_file_does_not_exist

The report including the sample program and the steps for reproducing
the bug:

  https://lore.kernel.org/bpf/CANaYP3HWkH91SN=wTNO9FL_2ztHfqcXKX38SSE-JJ2voh+vssw@mail.gmail.com

Fixes: 4cf1bc1f1045 ("bpf: Implement task local storage")
Fixes: 8ea636848aca ("bpf: Implement bpf_local_storage for inodes")
Reported-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075525.256820-3-kpsingh@kernel.org
[ just take 1/2 of this patch for 5.10.y - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/hdcp: Get conn while content_type changed

commit 8662e1119a7d1baa1b2001689b2923e9050754bd upstream.

Get DRM connector reference count while scheduling a prop work
to avoid any possible destroy of DRM connector when it is in
DRM_CONNECTOR_REGISTERED state.

Fixes: a6597faa2d59 ("drm/i915: Protect workers against disappearing connectors")
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-3-anshuman.gupta@intel.com
(cherry picked from commit b3c6661aad979ec3d4f5675cf3e6a35828607d6a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: Intel: hda: Avoid checking jack on system suspend

commit ef4d764c99f792b725d4754a3628830f094f5c58 upstream.

System takes a very long time to suspend after commit 215a22ed31a1
("ALSA: hda: Refactor codec PM to use direct-complete optimization"):
[   90.065964] PM: suspend entry (s2idle)
[   90.067337] Filesystems sync: 0.001 seconds
[   90.185758] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   90.188713] OOM killer disabled.
[   90.188714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   90.190024] printk: Suspending console(s) (use no_console_suspend to debug)
[   90.904912] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C], continue to suspend
[  321.262505] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[  328.426919] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[  329.490933] ACPI: EC: interrupt blocked

That commit keeps the codec suspended during the system suspend. However,
mute/micmute LED will clear codec's direct-complete flag by
dpm_clear_superiors_direct_complete().

This doesn't play well with SOF driver. When its runtime resume is
called for system suspend, hda_codec_jack_check() schedules
jackpoll_work which uses snd_hdac_is_power_on() to check whether codec
is suspended. Because the direct-complete path isn't taken,
pm_runtime_disable() isn't called so snd_hdac_is_power_on() returns
false and jackpoll continues to run, and snd_hda_power_up_pm() cannot
power up an already suspended codec in multiple attempts, causes the
long delay on system suspend:

if (dev->power.direct_complete) {
if (pm_runtime_status_suspended(dev)) {
pm_runtime_disable(dev);
if (pm_runtime_status_suspended(dev)) {
pm_dev_dbg(dev, state, "direct-complete ");
goto Complete;
}

pm_runtime_enable(dev);
}
dev->power.direct_complete = false;
}

When direct-complete path is taken, snd_hdac_is_power_on() returns true
and hda_jackpoll_work() is skipped by accident. So this is still not
correct.

If we were to use snd_hdac_is_power_on() in system PM path,
pm_runtime_status_suspended() should be used instead of
pm_runtime_suspended(), otherwise pm_runtime_{enable,disable}() may
change the outcome of snd_hdac_is_power_on().

Because devices suspend in reverse order (i.e. child first), it doesn't
make much sense to resume an already suspended codec from audio
controller. So avoid the issue by making sure jackpoll isn't used in
system PM process.

Fixes: 215a22ed31a1 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-3-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix potential use-after-free due to double kfree()

commit c89dffc70b340780e5b933832d8c3e045ef3791e upstream.

Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct
request_sock and then can allocate inet_rsk(req)->ireq_opt. After that,
tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to
inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full
socket into ehash and sets NULL to ireq_opt. Otherwise,
tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full
socket.

The commit 01770a1661657 ("tcp: fix race condition when creating child
sockets from syncookies") added a new path, in which more than one cores
create full sockets for the same SYN cookie. Currently, the core which
loses the race frees the full socket without resetting inet_opt, resulting
in that both sock_put() and reqsk_put() call kfree() for the same memory:

  sock_put
    sk_free
      __sk_free
        sk_destruct
          __sk_destruct
            sk->sk_destruct/inet_sock_destruct
              kfree(rcu_dereference_protected(inet->inet_opt, 1));

  reqsk_put
    reqsk_free
      __reqsk_free
        req->rsk_ops->destructor/tcp_v4_reqsk_destructor
          kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1));

Calling kmalloc() between the double kfree() can lead to use-after-free, so
this patch fixes it by setting NULL to inet_opt before sock_put().

As a side note, this kind of issue does not happen for IPv6. This is
because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which
correspond to ireq_opt in IPv4.

Fixes: 01770a166165 ("tcp: fix race condition when creating child sockets from syncookies")
CC: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev-es: Handle string port IO to kernel memory properly

commit 7024f60d655272bd2ca1d3a4c9e0a63319b1eea1 upstream.

Don't assume dest/source buffers are userspace addresses when manually
copying data for string I/O or MOVS MMIO, as {get,put}_user() will fail
if handed a kernel address and ultimately lead to a kernel panic.

When invoking INSB/OUTSB instructions in kernel space in a
SEV-ES-enabled VM, the kernel crashes with the following message:

  "SEV-ES: Unsupported exception in #VC instruction emulation - can't continue"

Handle that case properly.

 [ bp: Massage commit message. ]

Fixes: f980f9c31a92 ("x86/sev-es: Compile early handler code into kernel image")
Signed-off-by: Hyunwook (Wooky) Baek <baekhw@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20210110071102.2576186-1-baekhw@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: systemport: free dev before on error path

commit 0c630a66bf10991b0ef13d27c93d7545e692ef5b upstream.

On the error path, it should goto the error handling label to free
allocated memory rather than directly return.

Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: fix up hung_up_tty_write() conversion

commit 17749851eb9ca2298e7c3b81aae4228961b36f28 upstream.

In commit "tty: implement write_iter", I left the write_iter conversion
of the hung up tty case alone, because I incorrectly thought it didn't
matter.

Jiri showed me the errors of my ways, and pointed out the problems with
that incomplete conversion.  Fix it all up.

Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh+-rGsa=xruEWdg_fJViFG8rN9bpLrfLz=_yBYh2tBhA@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: implement write_iter

commit 9bb48c82aced07698a2d08ee0f1475a6c4f6b266 upstream.

This makes the tty layer use the .write_iter() function instead of the
traditional .write() functionality.

That allows writev(), but more importantly also makes it possible to
enable .splice_write() for ttys, reinstating the "splice to tty"
functionality that was lost in commit 36e2c7421f02 ("fs: don't allow
splice read/write without explicit ops").

Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Reported-by: Oliver Giles <ohw.giles@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Fix nonistr violation

commit a1d5c98aac33a5a0004ecf88905dcc261c52f988 upstream.

When the compiler fails to inline, it violates nonisntr:

  vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0xc7: call to sev_es_wr_ghcb_msr() leaves .noinstr.text section

Fixes: 4ca68e023b11 ("x86/sev-es: Handle NMI State")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.532902065@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: Don't clear pending interrupts when enabling

commit cf9d052aa6005f1e8dfaf491d83bf37f368af69e upstream.

In Linux, if a driver does disable_irq() and later does enable_irq()
on its interrupt, I believe it's expecting these properties:
* If an interrupt was pending when the driver disabled then it will
  still be pending after the driver re-enables.
* If an edge-triggered interrupt comes in while an interrupt is
  disabled it should assert when the interrupt is re-enabled.

If you think that the above sounds a lot like the disable_irq() and
enable_irq() are supposed to be masking/unmasking the interrupt
instead of disabling/enabling it then you've made an astute
observation.  Specifically when talking about interrupts, "mask"
usually means to stop posting interrupts but keep tracking them and
"disable" means to fully shut off interrupt detection.  It's
unfortunate that this is so confusing, but presumably this is all the
way it is for historical reasons.

Perhaps more confusing than the above is that, even though clients of
IRQs themselves don't have a way to request mask/unmask
vs. disable/enable calls, IRQ chips themselves can implement both.
...and yet more confusing is that if an IRQ chip implements
disable/enable then they will be called when a client driver calls
disable_irq() / enable_irq().

It does feel like some of the above could be cleared up.  However,
without any other core interrupt changes it should be clear that when
an IRQ chip gets a request to "disable" an IRQ that it has to treat it
like a mask of that IRQ.

In any case, after that long interlude you can see that the "unmask
and clear" can break things.  Maulik tried to fix it so that we no
longer did "unmask and clear" in commit 71266d9d3936 ("pinctrl: qcom:
Move clearing pending IRQ to .irq_request_resources callback"), but it
only handled the PDC case and it had problems (it caused
sc7180-trogdor devices to fail to suspend).  Let's fix.

>From my understanding the source of the phantom interrupt in the
were these two things:
1. One that could have been introduced in msm_gpio_irq_set_type()
   (only for the non-PDC case).
2. Edges could have been detected when a GPIO was muxed away.

Fixing case #1 is easy.  We can just add a clear in
msm_gpio_irq_set_type().

Fixing case #2 is harder.  Let's use a concrete example.  In
sc7180-trogdor.dtsi we configure the uart3 to have two pinctrl states,
sleep and default, and mux between the two during runtime PM and
system suspend (see geni_se_resources_{on,off}() for more
details). The difference between the sleep and default state is that
the RX pin is muxed to a GPIO during sleep and muxed to the UART
otherwise.

As per Qualcomm, when we mux the pin over to the UART function the PDC
(or the non-PDC interrupt detection logic) is still watching it /
latching edges.  These edges don't cause interrupts because the
current code masks the interrupt unless we're entering suspend.
However, as soon as we enter suspend we unmask the interrupt and it's
counted as a wakeup.

Let's deal with the problem like this:
* When we mux away, we'll mask our interrupt.  This isn't necessary in
  the above case since the client already masked us, but it's a good
  idea in general.
* When we mux back will clear any interrupts and unmask.

Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Fixes: 71266d9d3936 ("pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210114191601.v7.4.I7cf3019783720feb57b958c95c2b684940264cd1@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking

commit a95881d6aa2c000e3649f27a1a7329cf356e6bb3 upstream.

In commit 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for
msm gpio") we tried to Ack interrupts during unmask.  However, that
patch forgot to check "intr_ack_high" so, presumably, it only worked
for a certain subset of SoCs.

Let's add a small accessor so we don't need to open-code the logic in
both places.

This was found by code inspection.  I don't have any access to the
hardware in question nor software that needs the Ack during unmask.

Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.3.I32d0f4e174d45363b49ab611a13c3da8f1e87d0f@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: No need to read-modify-write the interrupt status

commit 4079d35fa4fca4ee0ffd66968312fc86a5e8c290 upstream.

When the Qualcomm pinctrl driver wants to Ack an interrupt, it does a
read-modify-write on the interrupt status register.  On some SoCs it
makes sure that the status bit is 1 to "Ack" and on others it makes
sure that the bit is 0 to "Ack".  Presumably the first type of
interrupt controller is a "write 1 to clear" type register and the
second just let you directly set the interrupt status register.

As far as I can tell from scanning structure definitions, the
interrupt status bit is always in a register by itself.  Thus with
both types of interrupt controllers it is safe to "Ack" interrupts
without doing a read-modify-write.  We can do a simple write.

It should be noted that if the interrupt status bit _was_ ever in a
register with other things (like maybe status bits for other GPIOs):
a) For "write 1 clear" type controllers then read-modify-write would
   be totally wrong because we'd accidentally end up clearing
   interrupts we weren't looking at.
b) For "direct set" type controllers then read-modify-write would also
   be wrong because someone setting one of the other bits in the
   register might accidentally clear (or set) our interrupt.
I say this simply to show that the current read-modify-write doesn't
provide any sort of "future proofing" of the code.  In fact (for
"write 1 clear" controllers) the new code is slightly more "future
proof" since it would allow more than one interrupt status bits to
share a register.

NOTE: this code fixes no bugs--it simply avoids an extra register
read.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.2.I3635de080604e1feda770591c5563bd6e63dd39d@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0

commit a82e537807d5c85706cd4c16fd2de77a8495dc8d upstream.

There's currently a comment in the code saying function 0 is GPIO.
Instead of hardcoding it, let's add a member where an SoC can specify
it.  No known SoCs use a number other than 0, but this just makes the
code clearer.  NOTE: no SoC code needs to be updated since we can rely
on zero-initialization.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.1.I3ad184e3423d8e479bc3e86f5b393abb1704a1d1@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: core: devlink: use right genl user_ptr when handling port param get/set

commit 7e238de8283acd32c26c2bc2a50672d0ea862ff7 upstream.

Fix incorrect user_ptr dereferencing when handling port param get/set:

    idx [0] stores the 'struct devlink' pointer;
    idx [1] stores the 'struct devlink_port' pointer;

Fixes: 637989b5d77e ("devlink: Always use user_ptr[0] for devlink and simplify post_doit")
CC: Parav Pandit <parav@mellanox.com>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mscc: ocelot: Fix multicast to the CPU port

commit 584b7cfcdc7d6d416a9d6fece9516764bd977d2e upstream.

Multicast entries in the MAC table use the high bits of the MAC
address to encode the ports that should get the packets. But this port
mask does not work for the CPU port, to receive these packets on the
CPU port the MAC_CPU_COPY flag must be set.

Because of this IPv6 was effectively not working because neighbor
solicitations were never received. This was not apparent before commit
9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb
entries) as the IPv6 entries were broken so all incoming IPv6
multicast was then treated as unknown and flooded on all ports.

To fix this problem rework the ocelot_mact_learn() to set the
MAC_CPU_COPY flag when a multicast entry that target the CPU port is
added. For this we have to read back the ports endcoded in the pseudo
MAC address by the caller. It is not a very nice design but that avoid
changing the callers and should make backporting easier.

Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Fixes: 9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries")
Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix TCP_USER_TIMEOUT with zero window

commit 9d9b1ee0b2d1c9e02b2338c4a4b0a062d2d3edac upstream.

The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.

The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():

    RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
    as long as the receiver continues to respond probes. We support
    this by default and reset icsk_probes_out with incoming ACKs.

This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.

In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.

Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall <william.mccall@gmail.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not mess with cloned skbs in tcp_add_backlog()

commit b160c28548bc0a87cbd16d5af6d3edcfd70b8c9a upstream.

Heiner Kallweit reported that some skbs were sent with
the following invalid GSO properties :
- gso_size > 0
- gso_type == 0

This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2.

Juerg Haefliger was able to reproduce a similar issue using
a lan78xx NIC and a workload mixing TCP incoming traffic
and forwarded packets.

The problem is that tcp_add_backlog() is writing
over gso_segs and gso_size even if the incoming packet will not
be coalesced to the backlog tail packet.

While skb_try_coalesce() would bail out if tail packet is cloned,
this overwriting would lead to corruptions of other packets
cooked by lan78xx, sharing a common super-packet.

The strategy used by lan78xx is to use a big skb, and split
it into all received packets using skb_clone() to avoid copies.
The drawback of this strategy is that all the small skb share a common
struct skb_shared_info.

This patch rewrites TCP gso_size/gso_segs handling to only
happen on the tail skb, since skb_try_coalesce() made sure
it was not cloned.

Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: Juerg Haefliger <juergh@canonical.com>
Tested-by: Juerg Haefliger <juergh@canonical.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423
Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: fix an off by one in checking "vlan->vid"

commit 8e4052c32d6b4b39c1e13c652c7e33748d447409 upstream.

The > comparison should be >= to prevent accessing one element beyond
the end of the dev->vlans[] array in the caller function, b53_vlan_add().
The "dev->vlans" array is allocated in the b53_switch_init() function
and it has "dev->num_vlans" elements.

Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled

commit a3eb4e9d4c9218476d05c52dfd2be3d6fdce6b91 upstream.

With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.

Fixes: 14136564c8ee ("net: Add TLS RX offload feature")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mscc: ocelot: allow offloading of bridge on top of LAG

commit 79267ae22615496655feee2db0848f6786bcf67a upstream.

The blamed commit was too aggressive, and it made ocelot_netdevice_event
react only to network interface events emitted for the ocelot switch
ports.

In fact, only the PRECHANGEUPPER should have had that check.

When we ignore all events that are not for us, we miss the fact that the
upper of the LAG changes, and the bonding interface gets enslaved to a
bridge. This is an operation we could offload under certain conditions.

Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: set multicast flag on the multicast route

commit ceed9038b2783d14e0422bdc6fd04f70580efb4c upstream.

The multicast route ff00::/8 is created with type RTN_UNICAST:

  $ ip -6 -d route
  unicast ::1 dev lo proto kernel scope global metric 256 pref medium
  unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
  unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium

Set the type to RTN_MULTICAST which is more appropriate.

Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: reject silly cell_log in qdisc_get_rtab()

commit e4bedf48aaa5552bc1f49703abd17606e7e6e82a upstream.

iproute2 probably never goes beyond 8 for the cell exponent,
but stick to the max shift exponent for signed 32bit.

UBSAN reported:
UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22
shift exponent 130 is too large for 32-bit type 'int'
CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x183/0x22e lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:148 [inline]
 __ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
 __detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389
 qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435
 cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180
 qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246
 tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662
 rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0x5a2/0x900 net/socket.c:2345
 ___sys_sendmsg net/socket.c:2399 [inline]
 __sys_sendmsg+0x319/0x400 net/socket.c:2432
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210114160637.1660597-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: avoid shift-out-of-bounds in tcindex_set_parms()

commit bcd0cf19ef8258ac31b9a20248b05c15a1f4b4b0 upstream.

tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT
attribute is not silly.

UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29
shift exponent 255 is too large for 32-bit type 'int'
CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 valid_perfect_hash net/sched/cls_tcindex.c:260 [inline]
 tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425
 tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546
 tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127
 rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2336
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2390
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2423
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114185229.1742255-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: create multicast route with RTPROT_KERNEL

commit a826b04303a40d52439aa141035fca5654ccaccd upstream.

The ff00::/8 multicast route is created without specifying the fc_protocol
field, so the default RTPROT_BOOT value is used:

  $ ip -6 -d route
  unicast ::1 dev lo proto kernel scope global metric 256 pref medium
  unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
  unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium

As the documentation says, this value identifies routes installed during
boot, but the route is created when interface is set up.
Change the value to RTPROT_KERNEL which is a better value.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: mask TOS bits in udp_v4_early_demux()

commit 8d2b51b008c25240914984208b2ced57d1dd25a5 upstream.

udp_v4_early_demux() is the only function that calls
ip_mc_validate_source() with a TOS that hasn't been masked with
IPTOS_RT_MASK.

This results in different behaviours for incoming multicast UDPv4
packets, depending on if ip_mc_validate_source() is called from the
early-demux path (udp_v4_early_demux) or from the regular input path
(ip_route_input_noref).

ECN would normally not be used with UDP multicast packets, so the
practical consequences should be limited on that side. However,
IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align
with the non-early-demux path behaviour.

Reproducer:

  Setup two netns, connected with veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10

  In ns0, add route to multicast address 224.0.2.0/24 using source
  address 198.51.100.10:
  $ ip -netns ns0 address add 198.51.100.10/32 dev lo
  $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10

  In ns1, define route to 198.51.100.10, only for packets with TOS 4:
  $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10

  Also activate rp_filter in ns1, so that incoming packets not matching
  the above route get dropped:
  $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1

  Now try to receive packets on 224.0.2.11:
  $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof -

  In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is,
  tos 6 for socat):
  $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test0" message is properly received by socat in ns1, because
  early-demux has no cached dst to use, so source address validation
  is done by ip_route_input_mc(), which receives a TOS that has the
  ECN bits masked.

  Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0):
  $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test1" message isn't received by socat in ns1, because, now,
  early-demux has a cached dst to use and calls ip_mc_validate_source()
  immediately, without masking the ECN bits.

Fixes: bc044e8db796 ("udp: perform source validation for mcast early demux")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: gen_estimator: support large ewma log

commit dd5e073381f2ada3630f36be42833c6e9c78b75e upstream.

syzbot report reminded us that very big ewma_log were supported in the past,
even if they made litle sense.

tc qdisc replace dev xxx root est 1sec 131072sec ...

While fixing the bug, also add boundary checks for ewma_log, in line
with range supported by iproute2.

UBSAN: shift-out-of-bounds in net/core/gen_estimator.c:83:38
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 est_timer.cold+0xbb/0x12d net/core/gen_estimator.c:83
 call_timer_fn+0x1a5/0x710 kernel/time/timer.c:1417
 expire_timers kernel/time/timer.c:1462 [inline]
 __run_timers.part.0+0x692/0xa80 kernel/time/timer.c:1731
 __run_timers kernel/time/timer.c:1712 [inline]
 run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1744
 __do_softirq+0x2bc/0xa77 kernel/softirq.c:343
 asm_call_irq_on_stack+0xf/0x20
 </IRQ>
 __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
 run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
 do_softirq_own_stack+0xaa/0xd0 arch/x86/kernel/irq_64.c:77
 invoke_softirq kernel/softirq.c:226 [inline]
 __irq_exit_rcu+0x17f/0x200 kernel/softirq.c:420
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:432
 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1096
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:628
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:79 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:169 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516

Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114181929.1717985-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix TCP socket rehash stats mis-accounting

commit 9c30ae8398b0813e237bde387d67a7f74ab2db2d upstream.

The previous commit 32efcc06d2a1 ("tcp: export count for rehash attempts")
would mis-account rehashing SNMP and socket stats:

  a. During handshake of an active open, only counts the first
     SYN timeout

  b. After handshake of passive and active open, stop updating
     after (roughly) TCP_RETRIES1 recurring RTOs

  c. After the socket aborts, over count timeout_rehash by 1

This patch fixes this by checking the rehash result from sk_rethink_txhash.

Fixes: 32efcc06d2a1 ("tcp: export count for rehash attempts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: fix incorrect arguments passing in kasan_add_zero_shadow

commit 5dabd1712cd056814f9ab15f1d68157ceb04e741 upstream.

kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.

Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow

commit a11a496ee6e2ab6ed850233c96b94caf042af0b9 upstream.

During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.

In the test case for kasan_remove_zero_shadow():

    shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000

    3-level page table:
      PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K

0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.

In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.

Fix by correcting the condition when next and addr are neither aligned.

Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too

commit 66c556025d687dbdd0f748c5e1df89c977b6c02a upstream.

Commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for
tiny skbs") ensured that skbs with data size lower than 1025 bytes
will be kmalloc'ed to avoid excessive page cache fragmentation and
memory consumption.
However, the fix adressed only __napi_alloc_skb() (primarily for
virtio_net and napi_get_frags()), but the issue can still be achieved
through __netdev_alloc_skb(), which is still used by several drivers.
Drivers often allocate a tiny skb for headers and place the rest of
the frame to frags (so-called copybreak).
Mirror the condition to __netdev_alloc_skb() to handle this case too.

Since v1 [0]:
 - fix "Fixes:" tag;
 - refine commit message (mention copybreak usecase).

[0] https://lore.kernel.org/netdev/20210114235423.232737-1-alobakin@pm.me

Fixes: a1c7fff7e18f ("net: netdev_alloc_skb() use build_skb()")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210115150354.85967-1-alobakin@pm.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: fix memory leak when submit fails

commit 97784481757fba7570121a70dd37ca74a29f50a8 upstream.

The allocated page is not released if error occurs in
nvm_submit_io_sync_raw(). __free_page() is moved ealier to avoid
possible memory leak issue.

Fixes: aff3fb18f957 ("lightnvm: move bad block and chunk state logic to core")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: Drop superfluous readpages aops NULL check

commit db58465f1121086b524be80be39d1fedbe5387f3 upstream.

After the recent actions to convert readpages aops to readahead, the
NULL checks of readpages aops in cachefiles_read_or_alloc_page() may
hit falsely.  More badly, it's an ASSERT() call, and this panics.

Drop the superfluous NULL checks for fixing this regression.

[DH: Note that cachefiles never actually used readpages, so this check was
 never actually necessary]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: fix error unwind in nvme_map_data

commit fa0732168fa1369dd089e5b06d6158a68229f7b7 upstream.

Properly unwind step by step using refactored helpers from nvme_unmap_data
to avoid a potential double dma_unmap on a mapping failure.

Fixes: 7fe07d14f71f ("nvme-pci: merge nvme_free_iod into nvme_unmap_data")
Reported-by: Marc Orr <marcorr@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-pci: refactor nvme_unmap_data

commit 9275c206f88e5c49cb3e71932c81c8561083db9e upstream.

Split out three helpers from nvme_unmap_data that will allow finer grained
unwinding from nvme_map_data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh_eth: Fix power down vs. is_opened flag ordering

commit f6a2e94b3f9d89cb40771ff746b16b5687650cbb upstream.

sh_eth_close() does a synchronous power down of the device before
marking it closed.  Revert the order, to make sure the device is never
marked opened while suspended.

While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as
there is no reason to do a synchronous power down.

Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/powerpc: Fix exit status of pkey tests

commit 92a5e1fdb286851d5bd0eb966b8d075be27cf5ee upstream.

Since main() does not return a value explicitly, the
return values from FAIL_IF() conditions are ignored
and the tests can still pass irrespective of failures.
This makes sure that we always explicitly return the
correct test exit status.

Fixes: 1addb6444791 ("selftests/powerpc: Add test for execute-disabled pkeys")
Fixes: c27f2fd1705a ("selftests/powerpc: Add test for pkey siginfo verification")
Reported-by: Eirik Fuller <efuller@redhat.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210118093145.10134-1-sandipan@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnext

commit 87fe04367d842c4d97a77303242d4dd4ac351e46 upstream.

mv88e6xxx_port_vlan_join checks whether the VTU already contains an
entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely
changes the relevant .member[] element and loads the updated entry
into the VTU.

However, at least for the mv88e6250, the on-stack struct
mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly
initialized, neither in mv88e6xxx_port_vlan_join() nor inside the
getnext implementation. So the new entry has random garbage for the
STU bits, breaking VLAN filtering.

When the VTU entry is initially created, those bits are all zero, and
we should make sure to keep them that way when the entry is updated.

Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-af: Fix missing check bugs in rvu_cgx.c

commit b7ba6cfabc42fc846eb96e33f1edcd3ea6290a27 upstream.

In rvu_mbox_handler_cgx_mac_addr_get()
and rvu_mbox_handler_cgx_mac_addr_set(),
the msg is expected only from PFs that are mapped to CGX LMACs.
It should be checked before mapping,
so we add the is_cgx_config_permitted() in the functions.

Fixes: 96be2e0da85e ("octeontx2-af: Support for MAC address filters in CGX")
Signed-off-by: Yingjie Wang <wangyingjie55@126.com>
Reviewed-by: Geetha sowjanya<gakula@marvell.com>
Link: https://lore.kernel.org/r/1610719804-35230-1-git-send-email-wangyingjie55@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: Intel: fix page fault at probe if i915 init fails

commit 9c25af250214e45f6d1c21ff6239a1ffeeedf20e upstream.

The earlier commit to fix runtime PM in case i915 init fails,
introduces a possibility to hit a page fault.

snd_hdac_ext_bus_device_exit() is designed to be called from
dev.release(). Calling it outside device reference counting, is
not safe and may lead to calling the device_exit() function
twice. Additionally, as part of ext_bus_device_init(), the device
is also registered with snd_hdac_device_register(). Thus before
calling device_exit(), the device must be removed from device
hierarchy first.

Fix the issue by rolling back init actions by calling
hdac_device_unregister() and then releasing device with put_device().
This matches with existing code in hdac-ext module.

To complete the fix, add handling for the case where
hda_codec_load_module() returns -ENODEV, and clean up the hdac_ext
resources also in this case.

In future work, hdac-ext interface should be extended to allow clients
more flexibility to handle the life-cycle of individual devices, beyond
just the current snd_hdac_ext_bus_device_remove(), which removes all
devices.

BugLink: https://github.com/thesofproject/linux/issues/2646
Reported-by: Jaroslav Kysela <perex@perex.cz>
Fixes: 6c63c954e1c5 ("ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210113150715.3992635-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/lockdep: Cure noinstr fail

commit 0afda3a888dccf12557b41ef42eee942327d122b upstream.

When the compiler doesn't feel like inlining, it causes a noinstr
fail:

  vmlinux.o: warning: objtool: lock_is_held_type()+0xb: call to lockdep_enabled() leaves .noinstr.text section

Fixes: 4d004099a668 ("lockdep: Fix lockdep recursion")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.592595176@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: Remove unused HAVE_COPY_THREAD_TLS macro

commit 19170492735be935747b0545b7eed8bb40cc1209 upstream.

Fixes:  e1cc9d8d596e ("sh: switch to copy_thread_tls()")
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: dma: fix kconfig dependency for G2_DMA

commit f477a538c14d07f8c45e554c8c5208d588514e98 upstream.

When G2_DMA is enabled and SH_DMA is disabled, it results in the following
Kbuild warning:

WARNING: unmet direct dependencies detected for SH_DMA_API
  Depends on [n]: SH_DMA [=n]
  Selected by [y]:
  - G2_DMA [=y] && SH_DREAMCAST [=y]

The reason is that G2_DMA selects SH_DMA_API without depending on or
selecting SH_DMA while SH_DMA_API depends on SH_DMA.

When G2_DMA was first introduced with commit 40f49e7ed77f
("sh: dma: Make G2 DMA configurable."), this wasn't an issue since
SH_DMA_API didn't have such dependency, and this way was the only way to
enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was
made visible and dependent on SH_DMA with commit d8902adcc1a9
("dmaengine: sh: Add Support SuperH DMA Engine driver").

Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues.

Fixes: d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/hdcp: Update CP property in update_pipe

commit b3c95d0bdb0855b1f28370629e9eebec6bceac17 upstream.

When crtc state need_modeset is true it is not necessary
it is going to be a real modeset, it can turns to be a
fastset instead of modeset.
This turns content protection property to be DESIRED and hdcp
update_pipe left with property to be in DESIRED state but
actual hdcp->value was ENABLED.

This issue is caught with DP MST setup, where we have multiple
connector in same DP_MST topology. When disabling HDCP on one of
DP MST connector leads to set the crtc state need_modeset to true
for all other crtc driving the other DP-MST topology connectors.
This turns up other DP MST connectors CP property to be DESIRED
despite the actual hdcp->value is ENABLED.
Above scenario fails the DP MST HDCP IGT test, disabling HDCP on
one MST stream should not cause to disable HDCP on another MST
stream on same DP MST topology.

v2:
- Fixed connector->base.registration_state == DRM_CONNECTOR_REGISTERED
  WARN_ON.

v3:
- Commit log improvement. [Uma]
- Added a comment before scheduling prop_work. [Uma]

Fixes: 33f9a623bfc6 ("drm/i915/hdcp: Update CP as per the kernel internal state")
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-2-anshuman.gupta@intel.com
(cherry picked from commit d276e16702e2d634094f75f69df3b493f359fe31)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: gpio: fix %llu warning in gpio-watch.c

commit 1fc7c1ef37f86f207b4db40aba57084bb2f6a69a upstream.

Some platforms, such as mips64, don't map __u64 to long long unsigned
int so using %llu produces a warning:

gpio-watch.c: In function ‘main’:
gpio-watch.c:89:30: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
   89 |    printf("line %u: %s at %llu\n",
      |                           ~~~^
      |                              |
      |                              long long unsigned int
      |                           %lu
   90 |           chg.info.offset, event, chg.timestamp_ns);
      |                                   ~~~~~~~~~~~~~~~~
      |                                      |
      |                                      __u64 {aka long unsigned int}

Replace the %llu with PRIu64 and cast the argument to uint64_t.

Fixes: 33f0c47b8fb4 ("tools: gpio: implement gpio-watch")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: gpio: fix %llu warning in gpio-event-mon.c

commit 2fe7c2f99440d52613e1cf845c96e8e463c28111 upstream.

Some platforms, such as mips64, don't map __u64 to long long unsigned
int so using %llu produces a warning:

gpio-event-mon.c:110:37: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
  110 |   fprintf(stdout, "GPIO EVENT at %llu on line %d (%d|%d) ",
      |                                  ~~~^
      |                                     |
      |                                     long long unsigned int
      |                                  %lu
  111 |    event.timestamp_ns, event.offset, event.line_seqno,
      |    ~~~~~~~~~~~~~~~~~~
      |         |
      |         __u64 {aka long unsigned int}

Replace the %llu with PRIu64 and cast the argument to uint64_t.

Fixes: 03fd11b03362 ("tools/gpio/gpio-event-mon: fix warning")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: rpfilter: mask ecn bits before fib lookup

commit 2e5a6266fbb11ae93c468dfecab169aca9c27b43 upstream.

RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.

Reproducer:

  Create two netns, connected with a veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/32 dev veth10

  Add a route to ns1 in ns0:
  $ ip -netns ns0 route add 192.0.2.11/32 dev veth01

  In ns1, only packets with TOS 4 can be routed to ns0:
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10

  Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
  is 4:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 0% packet loss ...

  Now use iptable's rpfilter module in ns1:
  $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP

  Not-ECT and ECT(1) packets still pass:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...

  But ECT(0) and ECN packets are dropped:
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 100% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 100% packet loss ...

After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.

Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cls_flower: call nla_ok() before nla_next()

commit c96adff95619178e2118925578343ad54857c80c upstream.

fl_set_enc_opt() simply checks if there are still bytes left to parse,
but this is not sufficent as syzbot seems to be able to generate
malformatted netlink messages. nla_ok() is more strict so should be
used to validate the next nlattr here.

And nla_validate_nested_deprecated() has less strict check too, it is
probably too late to switch to the strict version, but we can just
call nla_ok() too after it.

Reported-and-tested-by: syzbot+2624e3778b18fc497c92@syzkaller.appspotmail.com
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210115185024.72298-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu/amd: Set __max_die_per_package on AMD

commit 76e2fc63ca40977af893b724b00cc2f8e9ce47a4 upstream.

Set the maximum DIE per package variable on AMD using the
NodesPerProcessor topology value. This will be used by RAPL, among
others, to determine the maximum number of DIEs on the system in order
to do per-DIE manipulations.

 [ bp: Productize into a proper patch. ]

Fixes: 028c221ed190 ("x86/CPU/AMD: Save AMD NodeId as cpu_die_id")
Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Reported-by: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Tested-by: Rafael Kitover <rkitover@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210939
Link: https://lkml.kernel.org/r/20210106112106.GE5729@zn.tnic
Link: https://lkml.kernel.org/r/20210111101455.1194-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Fix noinstr fail

commit 9caa7ff509add50959a793b811cc7c9339e281cd upstream.

  vmlinux.o: warning: objtool: __do_fast_syscall_32()+0x47: call to syscall_enter_from_user_mode_work() leaves .noinstr.text section

Fixes: 4facb95b7ada ("x86/entry: Unbreak 32bit fast syscall")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.472696632@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4

commit 1c4995b0a576d24bb7ead991fb037c8b47ab6e32 upstream.

Let's not enable the 4:4:4->4:2:0 conversion bit in the DFP unless we're
actually outputting YCbCr 4:4:4. It would appear some protocol
converters blindy consult this bit even when the source is outputting
RGB, resulting in a visual mess.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2914
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111164111.13302-1-ville.syrjala@linux.intel.com
Fixes: 181567aa9f0d ("drm/i915: Do YCbCr 444->420 conversion via DP protocol converters")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 3170a21f7059c4660c469f59bf529f372a57da5f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118154355.24453-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/

commit 0e634efd858e0e9331ea037e1a142e34a446e9e3 upstream.

Rename intel_dp_sink_dpms() to intel_dp_set_power()
so one doesn't always have to convert from the DPMS
enum values to the actual DP D-states.

Also when dealing with a branch device this has nothing to
do with any sink, so the old name was nonsense anyway.
Also adjust the debug message accordingly, and pimp it
with the standard encoder id+name thing.

Trivial bits done with cocci:
@@
expression DP;
@@
(
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF)
+ intel_dp_set_power(DP, DP_SET_POWER_D3)
|
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON)
+ intel_dp_set_power(DP, DP_SET_POWER_D0)
)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Extend device_is_dependent()

commit 3d1cf435e201d1fd63e4346b141881aed086effd upstream.

If the device passed as the target (second argument) to
device_is_dependent() is not completely registered (that is, it has
been initialized, but not added yet), but the parent pointer of it
is set, it may be missing from the list of the parent's children
and device_for_each_child() called by device_is_dependent() cannot
be relied on to catch that dependency.

For this reason, modify device_is_dependent() to check the ancestors
of the target device by following its parent pointer in addition to
the device_for_each_child() walk.

Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Fix device link device name collision

commit e020ff611ba9be54e959e6b548038f8a020da1c9 upstream.

The device link device's name was of the form:
<supplier-dev-name>--<consumer-dev-name>

This can cause name collision as reported here [1] as device names are
not globally unique. Since device names have to be unique within the
bus/class, add the bus/class name as a prefix to the device names used to
construct the device link device name.

So the devuce link device's name will be of the form:
<supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name>

[1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/

Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Cc: stable@vger.kernel.org
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers core: Free dma_range_map when driver probe failed

commit d0243bbd5dd3ebbd49dafa8b56bb911d971131d0 upstream.

There will be memory leak if driver probe failed. Trace as below:
  backtrace:
    [<000000002415258f>] kmemleak_alloc+0x3c/0x50
    [<00000000f447ebe4>] __kmalloc+0x208/0x530
    [<0000000048bc7b3a>] of_dma_get_range+0xe4/0x1b0
    [<0000000041e39065>] of_dma_configure_id+0x58/0x27c
    [<000000006356866a>] platform_dma_configure+0x2c/0x40
    ......
    [<000000000afcf9b5>] ret_from_fork+0x10/0x3c

This issue is introduced by commit e0d072782c73("dma-mapping:
introduce DMA range map, supplanting dma_pfn_offset "). It doesn't
free dma_range_map when driver probe failed and cause above
memory leak. So, add code to free it in error path.

Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset ")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Link: https://lore.kernel.org/r/20210105070927.14968-1-Meng.Li@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: tegra: Delay for disabling LFPS detector

commit da7e0c3c2909a3d9bf8acfe1db3cb213bd7febfb upstream.

Occasionally, we are seeing some SuperSpeed devices resumes right after
being directed to U3. This commits add 500us delay to ensure LFPS
detector is disabled before sending ACK to firmware.

[   16.099363] tegra-xusb 70090000.usb: entering ELPG
[   16.104343] tegra-xusb 70090000.usb: 2-1 isn't suspended: 0x0c001203
[   16.114576] tegra-xusb 70090000.usb: not all ports suspended: -16
[   16.120789] tegra-xusb 70090000.usb: entering ELPG failed

The register write passes through a few flop stages of 32KHz clock domain.
NVIDIA ASIC designer reviewed RTL and suggests 500us delay.

Cc: stable@vger.kernel.org
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210115161907.2875631-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: make sure TRB is fully written before giving it to the controller

commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream.

Once the command ring doorbell is rung the xHC controller will parse all
command TRBs on the command ring that have the cycle bit set properly.

If the driver just started writing the next command TRB to the ring when
hardware finished the previous TRB, then HW might fetch an incomplete TRB
as long as its cycle bit set correctly.

A command TRB is 16 bytes (128 bits) long.
Driver writes the command TRB in four 32 bit chunks, with the chunk
containing the cycle bit last. This does however not guarantee that
chunks actually get written in that order.

This was detected in stress testing when canceling URBs with several
connected USB devices.
Two consecutive "Set TR Dequeue pointer" commands got queued right
after each other, and the second one was only partially written when
the controller parsed it, causing the dequeue pointer to be set
to bogus values. This was seen as error messages:

"Mismatch between completed Set TR Deq Ptr command & xHCI internal state"

Solution is to add a write memory barrier before writing the cycle bit.

Cc: <stable@vger.kernel.org>
Tested-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: imx: fix can't create core device the second time issue

commit 2ef02b846ee2526249a562a66d6dcb25fcbca9d8 upstream.

The cdns3 core device is populated by calling of_platform_populate,
the flag OF_POPULATED is set for core device node, if this flag
is not cleared, when calling of_platform_populate the second time
after loading parent module again, the OF code will not try to create
platform device for core device.

To fix it, it uses of_platform_depopulate to depopulate the core
device which the parent created, and the flag OF_POPULATED for
core device node will be cleared accordingly.

Cc: <stable@vger.kernel.org>
Fixes: 1e056efab993 ("usb: cdns3: add NXP imx8qm glue layer")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: imx: fix writing read-only memory issue

commit 92cbdb923c17544684c2dd3be9f8636617898a44 upstream.

The memory for struct clk_bulk_data should not be static which will be written
during the clk_bulk_get. It fixed below oops when loading cdns3-imx as module.

[   17.272605] Unable to handle kernel write to read-only memory at virtual address ffff8000092a5398
[   17.299730] Mem abort info:
[   17.313542] unregister ISI channel: mxc_isi.4
[   17.324076]   ESR = 0x9600004f
[   17.344658]   EC = 0x25: DABT (current EL), IL = 32 bits
[   17.402055]   SET = 0, FnV = 0
[   17.404321] mxs_phy 5b100000.usbphy: supply phy-3p0 not found, using dummy regulator
[   17.405121]   EA = 0, S1PTW = 0
[   17.405133] Data abort info:
[   17.496231]   ISV = 0, ISS = 0x0000004f
[   17.510871]   CM = 0, WnR = 1
[   17.533542] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081ea5000
[   17.545709] [ffff8000092a5398] pgd=00000008bffff003, p4d=00000008bffff003, pud=00000008bfffe003, pmd=0000000885041003, pte=006000088513b783
[   17.573521] Internal error: Oops: 9600004f [#1] PREEMPT SMP
[   17.579113] Modules linked in: usbmisc_imx phy_mxs_usb phy_cadence_salvo cdns3_imx(+) tcpci imx8_media_dev(C) caam error
[   17.590044] CPU: 2 PID: 253 Comm: systemd-udevd Tainted: G         C        5.10.0-rc4-04445-g11f3c3a29d0-dirty #19
[   17.600488] Hardware name: Freescale i.MX8QXP MEK (DT)
[   17.605633] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
[   17.611662] pc : __clk_bulk_get+0x48/0x130
[   17.615786] lr : clk_bulk_get+0x18/0x20
[   17.619634] sp : ffff80001369b880
[   17.622953] x29: ffff80001369b880 x28: 0000000000000013
[   17.628277] x27: 0000000000000100 x26: ffff00080553b100
[   17.633602] x25: ffff80001229b4d8 x24: 0000000000000000
[   17.638928] x23: ffff000800665410 x22: 0000000000000005
[   17.644275] x21: ffff8000092a5390 x20: ffff000800665400
[   17.649605] x19: ffff000804e6f980 x18: 000000005b110000
[   17.654946] x17: 0000000000000000 x16: 0000000000000000
[   17.660274] x15: ffff800011989100 x14: 0000000000000000
[   17.665599] x13: ffff800013ce1000 x12: ffff800013ca1000
[   17.670924] x11: 000000005b110000 x10: 0000000000000000
[   17.676249] x9 : ffff8000106c5a30 x8 : ffff000804e6fa00
[   17.681575] x7 : 0000000000000000 x6 : 000000000000003f
[   17.686901] x5 : 0000000000000040 x4 : ffff80001369b8b0
[   17.692228] x3 : ffff8000092a5398 x2 : ffff8000092a5390
[   17.697574] x1 : ffff8000092a53e8 x0 : 0000000000000004
[   17.702905] Call trace:
[   17.705366]  __clk_bulk_get+0x48/0x130
[   17.709125]  clk_bulk_get+0x18/0x20
[   17.712620]  devm_clk_bulk_get+0x58/0xb8
[   17.716563]  cdns_imx_probe+0x84/0x1f0 [cdns3_imx]
[   17.721363]  platform_drv_probe+0x58/0xa8
[   17.725381]  really_probe+0xec/0x4c8
[   17.728967]  driver_probe_device+0xf4/0x160
[   17.733160]  device_driver_attach+0x74/0x80
[   17.737355]  __driver_attach+0xa4/0x170
[   17.741202]  bus_for_each_dev+0x74/0xc8
[   17.745043]  driver_attach+0x28/0x30
[   17.748620]  bus_add_driver+0x144/0x228
[   17.752462]  driver_register+0x68/0x118
[   17.756308]  __platform_driver_register+0x4c/0x58
[   17.761022]  cdns_imx_driver_init+0x24/0x1000 [cdns3_imx]
[   17.766434]  do_one_initcall+0x48/0x2c0
[   17.770280]  do_init_module+0x5c/0x220
[   17.774029]  load_module+0x210c/0x2858
[   17.777784]  __do_sys_finit_module+0xb8/0x120
[   17.782148]  __arm64_sys_finit_module+0x24/0x30
[   17.786691]  el0_svc_common.constprop.0+0x70/0x168
[   17.791497]  do_el0_svc+0x28/0x88
[   17.794822]  el0_sync_handler+0x158/0x160
[   17.798833]  el0_sync+0x140/0x180
[   17.802158] Code: aa0203f5 91002043 8b205021 a90153f3 (f801047f)

Cc: <stable@vger.kernel.org>
Fixes: 1e056efab993 ("usb: cdns3: add NXP imx8qm glue layer")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: bdc: Make bdc pci driver depend on BROKEN

commit ef02684c4e67d8c35ac83083564135bc7b1d3445 upstream.

The bdc pci driver is going to be removed due to it not existing in the
wild. This patch turns off compilation of the driver so that stable
kernels can also pick up the change. This helps the out-of-tree
facetimehd webcam driver as the pci id conflicts with bdc.

Cc: Al Cooper <alcooperx@gmail.com>
Cc: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: udc: core: Use lock when write to soft_connect

commit c28095bc99073ddda65e4f31f6ae0d908d4d5cd8 upstream.

Use lock to guard against concurrent access for soft-connect/disconnect
operations when writing to soft_connect sysfs.

Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
Cc: stable@vger.kernel.org
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/338ea01fbd69b1985ef58f0f59af02c805ddf189.1610611437.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: dummy-hcd: Fix errors in port-reset handling

commit 6e6aa61d81194c01283880950df563b1b9abec46 upstream.

Commit c318840fb2a4 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds
bug") messed up the way dummy-hcd handles requests to turn on the
RESET port feature (I didn't notice that the original switch case
ended with a fallthrough).  The call to set_link_state() was
inadvertently removed, as was the code to set the USB_PORT_STAT_RESET
flag when the speed is USB2.

In addition, the original code never checked whether the port was
connected before handling the port-reset request.  There was a check
for the port being powered, but it was removed by that commit!  In
practice this doesn't matter much because the kernel doesn't try to
reset disconnected ports, but it's still bad form.

This patch fixes these problems by changing the fallthrough to break,
adding back in the missing set_link_state() call, setting the
port-reset status flag, adding a port-is-connected test, and removing
a redundant assignment statement.

Fixes: c318840fb2a4 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug")
CC: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210113194510.GA1290698@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: aspeed: fix stop dma register setting.

commit 4e0dcf62ab4cf917d0cbe751b8bf229a065248d4 upstream.

The vhub engine has two dma mode, one is descriptor list, another
is single stage DMA. Each mode has different stop register setting.
Descriptor list operation (bit2) : 0 disable reset, 1: enable reset
Single mode operation (bit0) : 0 : disable, 1: enable

Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub")
Cc: stable <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://lore.kernel.org/r/20210108081238.10199-2-ryan_chen@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ehci: fix an interrupt calltrace error

commit 643a4df7fe3f6831d14536fd692be85f92670a52 upstream.

The system that use Synopsys USB host controllers goes to suspend
when using USB audio player. This causes the USB host controller
continuous send interrupt signal to system, When the number of
interrupts exceeds 100000, the system will forcibly close the
interrupts and output a calltrace error.

When the system goes to suspend, the last interrupt is reported to
the driver. At this time, the system has set the state to suspend.
This causes the last interrupt to not be processed by the system and
not clear the interrupt flag. This uncleared interrupt flag constantly
triggers new interrupt event. This causing the driver to receive more
than 100,000 interrupts, which causes the system to forcibly close the
interrupt report and report the calltrace error.

so, when the driver goes to sleep and changes the system state to
suspend, the interrupt flag needs to be cleared.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1610416647-45774-1-git-send-email-liulongfang@huawei.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ehci: fix EHCI host controller initialization sequence

commit 280a9045bb18833db921b316a5527d2b565e9f2e upstream.

According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever
USBCMD.RS=1.

However, it is a good practice to wait some time after setting USBCMD.RS
(approximately 100ms) until USBSTS.HCHalted become zero.

Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs
(see BugLink).

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: mvebu-uart: fix tx lost characters at power off

commit 54ca955b5a4024e2ce0f206b03adb7109bc4da26 upstream.

Commit c685af1108d7 ("serial: mvebu-uart: fix tx lost characters") fixed tx
lost characters at low baud rates but started causing tx lost characters
when kernel is going to power off or reboot.

TX_EMP tells us when transmit queue is empty therefore all characters were
transmitted. TX_RDY tells us when CPU can send a new character.

Therefore we need to use different check prior transmitting new character
and different check after all characters were sent.

This patch splits polling code into two functions: wait_for_xmitr() which
waits for TX_RDY and wait_for_xmite() which waits for TX_EMP.

When rebooting A3720 platform without this patch on UART is print only:
[   42.699�

And with this patch on UART is full output:
[   39.530216] reboot: Restarting system

Fixes: c685af1108d7 ("serial: mvebu-uart: fix tx lost characters")
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201223191931.18343-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Fix module init return on allocation failure

commit 927633a6d20af319d986f3e42c3ef9f6d7835008 upstream.

In stm_heartbeat_init(): return value gets reset after the first
iteration by stm_source_register_device(), so allocation failures
after that will, after a clean up, return success. Fix that.

Fixes: 119291853038 ("stm class: Add heartbeat stm source device")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hui <john.wanghui@huawei.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210115195917.3184-2-alexander.shishkin@linux.intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Alder Lake-P support

commit cb5c681ab9037e25fcca20689c82cf034566d610 upstream.

This adds support for the Trace Hub in Alder Lake-P.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210115195917.3184-3-alexander.shishkin@linux.intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix short read retries for non-reg files

commit 9a173346bd9e16ab19c7addb8862d95a5cea9feb upstream.

Sockets and other non-regular files may actually expect short reads to
happen, don't retry reads for them. Because non-reg files don't set
FMODE_BUF_RASYNC and so it won't do second/retry do_read, we can filter
out those cases after first do_read() attempt with ret>0.

Cc: stable@vger.kernel.org # 5.9+
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state

commit 607ec89ed18f49ca59689572659b9c0076f1991f upstream.

IORING_OP_CLOSE is special in terms of cancelation, since it has an
intermediate state where we've removed the file descriptor but hasn't
closed the file yet. For that reason, it's currently marked with
IO_WQ_WORK_NO_CANCEL to prevent cancelation. This ensures that the op
is always run even if canceled, to prevent leaving us with a live file
but an fd that is gone. However, with SQPOLL, since a cancel request
doesn't carry any resources on behalf of the request being canceled, if
we cancel before any of the close op has been run, we can end up with
io-wq not having the ->files assigned. This can result in the following
oops reported by Joseph:

BUG: kernel NULL pointer dereference, address: 00000000000000d8
PGD 800000010b76f067 P4D 800000010b76f067 PUD 10b462067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 1788 Comm: io_uring-sq Not tainted 5.11.0-rc4 #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__lock_acquire+0x19d/0x18c0
Code: 00 00 8b 1d fd 56 dd 08 85 db 0f 85 43 05 00 00 48 c7 c6 98 7b 95 82 48 c7 c7 57 96 93 82 e8 9a bc f5 ff 0f 0b e9 2b 05 00 00 <48> 81 3f c0 ca 67 8a b8 00 00 00 00 41 0f 45 c0 89 04 24 e9 81 fe
RSP: 0018:ffffc90001933828 EFLAGS: 00010002
RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000000000d8
RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff888106e8a140 R15: 00000000000000d8
FS:  0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000d8 CR3: 0000000106efa004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 lock_acquire+0x31a/0x440
 ? close_fd_get_file+0x39/0x160
 ? __lock_acquire+0x647/0x18c0
 _raw_spin_lock+0x2c/0x40
 ? close_fd_get_file+0x39/0x160
 close_fd_get_file+0x39/0x160
 io_issue_sqe+0x1334/0x14e0
 ? lock_acquire+0x31a/0x440
 ? __io_free_req+0xcf/0x2e0
 ? __io_free_req+0x175/0x2e0
 ? find_held_lock+0x28/0xb0
 ? io_wq_submit_work+0x7f/0x240
 io_wq_submit_work+0x7f/0x240
 io_wq_cancel_cb+0x161/0x580
 ? io_wqe_wake_worker+0x114/0x360
 ? io_uring_get_socket+0x40/0x40
 io_async_find_and_cancel+0x3b/0x140
 io_issue_sqe+0xbe1/0x14e0
 ? __lock_acquire+0x647/0x18c0
 ? __io_queue_sqe+0x10b/0x5f0
 __io_queue_sqe+0x10b/0x5f0
 ? io_req_prep+0xdb/0x1150
 ? mark_held_locks+0x6d/0xb0
 ? mark_held_locks+0x6d/0xb0
 ? io_queue_sqe+0x235/0x4b0
 io_queue_sqe+0x235/0x4b0
 io_submit_sqes+0xd7e/0x12a0
 ? _raw_spin_unlock_irq+0x24/0x30
 ? io_sq_thread+0x3ae/0x940
 io_sq_thread+0x207/0x940
 ? do_wait_intr_irq+0xc0/0xc0
 ? __ia32_sys_io_uring_enter+0x650/0x650
 kthread+0x134/0x180
 ? kthread_create_worker_on_cpu+0x90/0x90
 ret_from_fork+0x1f/0x30

Fix this by moving the IO_WQ_WORK_NO_CANCEL until _after_ we've modified
the fdtable. Canceling before this point is totally fine, and running
it in the io-wq context _after_ that point is also fine.

For 5.12, we'll handle this internally and get rid of the no-cancel
flag, as IORING_OP_CLOSE is the only user of it.

Cc: stable@vger.kernel.org
Fixes: b5dba59e0cf7 ("io_uring: add support for IORING_OP_CLOSE")
Reported-by: "Abaci <abaci@linux.alibaba.com>"
Reviewed-and-tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: iopoll requests should also wake task ->in_idle state

commit c93cc9e16d88e0f5ea95d2d65d58a8a4dab258bc upstream.

If we're freeing/finishing iopoll requests, ensure we check if the task
is in idling in terms of cancelation. Otherwise we could end up waiting
forever in __io_uring_task_cancel() if the task has active iopoll
requests that need cancelation.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix numa stats for thp migration

commit 5c447d274f3746fbed6e695e7b9a2d7bd8b31b71 upstream.

Currently the kernel is not correctly updating the numa stats for
NR_FILE_PAGES and NR_SHMEM on THP migration.  Fix that.

For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment
there is no need to handle THP migration as kernel still does not have
write support for file THP but to be more future proof, this patch adds
the THP support for those stats as well.

Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com
Fixes: e71769ae52609 ("mm: enable thp migration for shmem thp")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcg: fix memcg file_dirty numa stat

commit 8a8792f600abacd7e1b9bb667759dca1c153f64c upstream.

The kernel updates the per-node NR_FILE_DIRTY stats on page migration
but not the memcg numa stats.

That was not an issue until recently the commit 5f9a4f4a7096 ("mm:
memcontrol: add the missing numa_stat interface for cgroup v2") exposed
numa stats for the memcg.

So fix the file_dirty per-memcg numa stat.

Link: https://lkml.kernel.org/r/20210108155813.2914586-1-shakeelb@google.com
Fixes: 5f9a4f4a7096 ("mm: memcontrol: add the missing numa_stat interface for cgroup v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcg/slab: optimize objcg stock draining

commit 3de7d4f25a7438f09fef4e71ef111f1805cd8e7c upstream.

Imran Khan reported a 16% regression in hackbench results caused by the
commit f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects
instead of pages").  The regression is noticeable in the case of a
consequent allocation of several relatively large slab objects, e.g.
skb's.  As soon as the amount of stocked bytes exceeds PAGE_SIZE,
drain_obj_stock() and __memcg_kmem_uncharge() are called, and it leads
to a number of atomic operations in page_counter_uncharge().

The corresponding call graph is below (provided by Imran Khan):

  |__alloc_skb
  |    |
  |    |__kmalloc_reserve.isra.61
  |    |    |
  |    |    |__kmalloc_node_track_caller
  |    |    |    |
  |    |    |    |slab_pre_alloc_hook.constprop.88
  |    |    |     obj_cgroup_charge
  |    |    |    |    |
  |    |    |    |    |__memcg_kmem_charge
  |    |    |    |    |    |
  |    |    |    |    |    |page_counter_try_charge
  |    |    |    |    |
  |    |    |    |    |refill_obj_stock
  |    |    |    |    |    |
  |    |    |    |    |    |drain_obj_stock.isra.68
  |    |    |    |    |    |    |
  |    |    |    |    |    |    |__memcg_kmem_uncharge
  |    |    |    |    |    |    |    |
  |    |    |    |    |    |    |    |page_counter_uncharge
  |    |    |    |    |    |    |    |    |
  |    |    |    |    |    |    |    |    |page_counter_cancel
  |    |    |    |
  |    |    |    |
  |    |    |    |__slab_alloc
  |    |    |    |    |
  |    |    |    |    |___slab_alloc
  |    |    |    |    |
  |    |    |    |slab_post_alloc_hook

Instead of directly uncharging the accounted kernel memory, it's
possible to refill the generic page-sized per-cpu stock instead.  It's a
much faster operation, especially on a default hierarchy.  As a bonus,
__memcg_kmem_uncharge_page() will also get faster, so the freeing of
page-sized kernel allocations (e.g.  large kmallocs) will become faster.

A similar change has been done earlier for the socket memory by the
commit 475d0487a2ad ("mm: memcontrol: use per-cpu stocks for socket
memory uncharging").

Link: https://lkml.kernel.org/r/20210106042239.2860107-1-guro@fb.com
Fixes: f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects instead of pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Imran Khan <imran.f.khan@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutn <mkoutny@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc_sysctl: fix oops caused by incorrect command parameters

commit 697edcb0e4eadc41645fe88c991fe6a206b1a08d upstream.

The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val).  If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.

For example:
  "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
  triggered. The call stack is as follows:
    Kernel command line: .... hung_task_panic
    ......
    Call trace:
    __pi_strlen+0x10/0x98
    parse_args+0x278/0x344
    do_sysctl_args+0x8c/0xfc
    kernel_init+0x5c/0xf4
    ret_from_fork+0x10/0x30

To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().

Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d480e2843 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/setup: don't remove E820_TYPE_RAM for pfn 0

commit bde9cfa3afe4324ec251e4af80ebf9b7afaf7afe upstream.

Patch series "mm: fix initialization of struct page for holes in  memory layout", v3.

Commit 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions
rather that check each PFN") exposed several issues with the memory map
initialization and these patches fix those issues.

Initially there were crashes during compaction that Qian Cai reported
back in April [1].  It seemed back then that the problem was fixed, but
a few weeks ago Andrea Arcangeli hit the same bug [2] and there was an
additional discussion at [3].

[1] https://lore.kernel.org/lkml/8C537EB7-85EE-4DCF-943E-3CC0ED0DF56D@lca.pw
[2] https://lore.kernel.org/lkml/20201121194506.13464-1-aarcange@redhat.com
[3] https://lore.kernel.org/mm-commits/20201206005401.qKuAVgOXr%akpm@linux-foundation.org

This patch (of 2):

The first 4Kb of memory is a BIOS owned area and to avoid its allocation
for the kernel it was not listed in e820 tables as memory.  As the result,
pfn 0 was never recognised by the generic memory management and it is not
a part of neither node 0 nor ZONE_DMA.

If set_pfnblock_flags_mask() would be ever called for the pageblock
corresponding to the first 2Mbytes of memory, having pfn 0 outside of
ZONE_DMA would trigger

VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);

Along with reserving the first 4Kb in e820 tables, several first pages are
reserved with memblock in several places during setup_arch().  These
reservations are enough to ensure the kernel does not touch the BIOS area
and it is not necessary to remove E820_TYPE_RAM for pfn 0.

Remove the update of e820 table that changes the type of pfn 0 and move
the comment describing why it was done to trim_low_memory_range() that
reserves the beginning of the memory.

Link: https://lkml.kernel.org/r/20210111194017.22696-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mmx: Use KFPU_387 for MMX string operations

commit 67de8dca50c027ca0fa3b62a488ee5035036a0da upstream.

The default kernel_fpu_begin() doesn't work on systems that support XMM but
haven't yet enabled CR4.OSFXSR.  This causes crashes when _mmx_memcpy() is
called too early because LDMXCSR generates #UD when the aforementioned bit
is clear.

Fix it by using kernel_fpu_begin_mask(KFPU_387) explicitly.

Fixes: 7ad816762f9b ("x86/fpu: Reset MXCSR to default in kernel_fpu_begin()")
Reported-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/e7bf21855fe99e5f3baa27446e32623358f69e8d.1611205691.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/topology: Make __max_die_per_package available unconditionally

commit 1eb8f690bcb565a6600f8b6dcc78f7b239ceba17 upstream.

Move it outside of CONFIG_SMP in order to avoid ifdeffery at the usage
sites.

Fixes: 76e2fc63ca40 ("x86/cpu/amd: Set __max_die_per_package on AMD")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210114111814.5346-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state

commit e45122893a9870813f9bd7b4add4f613e6f29008 upstream.

Currently, requesting kernel FPU access doesn't distinguish which parts of
the extended ("FPU") state are needed.  This is nice for simplicity, but
there are a few cases in which it's suboptimal:

 - The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do
   not use legacy 387 state.  These users want MXCSR initialized but don't
   care about the FPU control word.  Skipping FNINIT would save time.
   (Empirically, FNINIT is several times slower than LDMXCSR.)

 - Code that wants MMX doesn't want or need MXCSR initialized.
   _mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and
   initializing MXCSR will fail because LDMXCSR generates an #UD when the
   aforementioned CR4 bit is not set.

 - Any future in-kernel users of XFD (eXtended Feature Disable)-capable
   dynamic states will need special handling.

Add a more specific API that allows callers to specify exactly what they
want.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/mips-cpu: Set IPI domain parent chip

commit 599b3063adf4bf041a87a69244ee36aded0d878f upstream.

Since commit 55567976629e ("genirq/irqdomain: Allow partial trimming of
irq_data hierarchy") the irq_data chain is valided.

The irq_domain_trim_hierarchy() function doesn't consider the irq + ipi
domain hierarchy as valid, since the ipi domain has the irq domain set
as parent, but the parent domain has no chip set. Hence the boot ends in
a kernel panic.

Set the chip for the parent domain as it is done in the mips gic irq
driver, to have a valid irq_data chain.

Fixes: 3838a547fda2 ("irqchip: mips-cpu: Introduce IPI IRQ domain support")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210107213603.1637781-1-dev@kresin.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: do not fail __smb_send_rqst if non-fatal signals are pending

commit 214a5ea081e77346e4963dd6d20c5539ff8b6ae6 upstream.

RHBZ 1848178

The original intent of returning an error in this function
in the patch:
  "CIFS: Mask off signals when sending SMB packets"
was to avoid interrupting packet send in the middle of
sending the data (and thus breaking an SMB connection),
but we also don't want to fail the request for non-fatal
signals even before we have had a chance to try to
send it (the reported problem could be reproduced e.g.
by exiting a child process when the parent process was in
the midst of calling futimens to update a file's timestamps).

In addition, since the signal may remain pending when we enter the
sending loop, we may end up not sending the whole packet before
TCP buffers become full. In this case the code returns -EINTR
but what we need here is to return -ERESTARTSYS instead to
allow system calls to be restarted.

Fixes: b30c74c73c78 ("CIFS: Mask off signals when sending SMB packets")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: fix scv entry fallback flush vs interrupt

commit 08685be7761d69914f08c3d6211c543a385a5b9c upstream.

The L1D flush fallback functions are not recoverable vs interrupts,
yet the scv entry flush runs with MSR[EE]=1. This can result in a
timer (soft-NMI) or MCE or SRESET interrupt hitting here and overwriting
the EXRFI save area, which ends up corrupting userspace registers for
scv return.

Fix this by disabling RI and EE for the scv entry fallback flush.

Fixes: f79643787e0a0 ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # 5.9+ which also have flush L1D patch backport
Reported-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210111062408.287092-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter:ti-eqep: remove floor

commit 49a9565a7a7ce168e3e6482fb24e62d12f72ab81 upstream.

The hardware doesn't support this. QPOSINIT is an initialization value
that is triggered by other things. When the counter overflows, it
always wraps around to zero.

Fixes: f213729f6796 "counter: new TI eQEP driver"
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20201214000927.1793062-1-david@lechnology.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()

commit 7e6d9788aa02333a4353058816d52b9a90aae0d3 upstream.

When the conversion was done to use devm_iio_kfifo_allocate(), a call to
iio_kfifo_free() was omitted (to be removed).
This change removes it.

Fixes: 3c5308058899 ("iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201203072650.24128-1-alexandru.ardelean@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c

commit cf5b1385d748b2f91b0c05bb301fcaf9bdbad385 upstream.

After an I2C reset command, the mlx90632 needs some time before
responding to other I2C commands. Without that delay, there is a chance
that the I2C command(s) after the reset will not be accepted.

Signed-off-by: Slaveyko Slaveykov <sis@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Fixes: e02472f74a81 ("iio:temperature:mlx90632: Adding extended calibration option")
Link: https://lore.kernel.org/r/20201216115720.12404-2-sis@melexis.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad5504: Fix setting power-down state

commit efd597b2839a9895e8a98fcb0b76d2f545802cd4 upstream.

The power-down mask of the ad5504 is actually a power-up mask. Meaning if
a bit is set the corresponding channel is powered up and if it is not set
the channel is powered down.

The driver currently has this the wrong way around, resulting in the
channel being powered up when requested to be powered down and vice versa.

Fixes: 3bbbf150ffde ("staging:iio:dac:ad5504: Use strtobool for boolean values")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201209104649.5794-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>