netfilter: bitwise: improve error goto labels

[ Upstream commit 00bd435208e5201eb935d273052930bd3b272b6f ]

Replace two labels (`err1` and `err2`) with more informative ones.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_cmp: optimize comparison for 16-bytes

[ Upstream commit 23f68d462984bfda47c7bf663dca347e8e3df549 ]

Allow up to 16-byte comparisons with a new cmp fast version. Use two
64-bit words and calculate the mask representing the bits to be
compared. Make sure the comparison is 64-bit aligned and avoid
out-of-bound memory access on registers.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: consolidate rule verdict trace call

[ Upstream commit 4765473fefd4403b5eeca371637065b561522c50 ]

Add function to consolidate verdict tracing.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_tunnel: restrict it to netdev family

[ Upstream commit 01e4092d53bc4fe122a6e4b6d664adbd57528ca3 ]

Only allow to use this expression from NFPROTO_NETDEV family.

Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families

[ Upstream commit 5f3b7aae14a706d0d7da9f9e39def52ff5fc3d39 ]

As it was originally intended, restrict extension to supported families.

Fixes: b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: do not leave chain stats enabled on error

[ Upstream commit 43eb8949cfdffa764b92bc6c54b87cbe5b0003fe ]

Error might occur later in the nf_tables_addchain() codepath, enable
static key only after transaction has been created.

Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_payload: do not truncate csum_offset and csum_type

[ Upstream commit 7044ab281febae9e2fa9b0b247693d6026166293 ]

Instead report ERANGE if csum_offset is too long, and EOPNOTSUPP if type
is not support.

Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_payload: report ERANGE for too long offset and length

[ Upstream commit 94254f990c07e9ddf1634e0b727fab821c3b5bf9 ]

Instead of offset and length are truncation to u8, report ERANGE.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: make table handle allocation per-netns friendly

[ Upstream commit ab482c6b66a4a8c0a8c0b0f577a785cf9ff1c2e2 ]

mutex is per-netns, move table_netns to the pernet area.

*read-write* to 0xffffffff883a01e8 of 8 bytes by task 6542 on cpu 0:
 nf_tables_newtable+0x6dc/0xc00 net/netfilter/nf_tables_api.c:1221
 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline]
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline]
 nfnetlink_rcv+0xa6a/0x13a0 net/netfilter/nfnetlink.c:652
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x652/0x730 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x643/0x740 net/netlink/af_netlink.c:1921

Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: disallow updates of implicit chain

[ Upstream commit 5dc52d83baac30decf5f3b371d5eb41dfa1d1412 ]

Updates on existing implicit chain make no sense, disallow this.

Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: fix NQ resource accounting during vf creation on 57500 chips

[ Upstream commit 09a89cc59ad67794a11e1d3dd13c5b3172adcc51 ]

There are 2 issues:

1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs
   with the number of NQs assigned to the VFs.  The IRQs are fixed
   on each function and cannot be re-assigned.  Only the NQs are being
   assigned to the VFs.

2. vf_msix is the total number of NQs to be assigned to the VFs.  So
   we should decrement vf_msix from hw_resc->max_nqs.

Fixes: b16b68918674 ("bnxt_en: Add SR-IOV support for 57500 chips.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ebtables: reject blobs that don't provide all entry points

[ Upstream commit 7997eff82828304b780dc0a39707e1946d6f1ebf ]

Harshit Mogalapalli says:
 In ebt_do_table() function dereferencing 'private->hook_entry[hook]'
 can lead to NULL pointer dereference. [..] Kernel panic:

general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[..]
RIP: 0010:ebt_do_table+0x1dc/0x1ce0
Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88
[..]
Call Trace:
 nf_hook_slow+0xb1/0x170
 __br_forward+0x289/0x730
 maybe_deliver+0x24b/0x380
 br_flood+0xc6/0x390
 br_dev_xmit+0xa2e/0x12c0

For some reason ebtables rejects blobs that provide entry points that are
not supported by the table, but what it should instead reject is the
opposite: blobs that DO NOT provide an entry point supported by the table.

t->valid_hooks is the bitmask of hooks (input, forward ...) that will see
packets.  Providing an entry point that is not support is harmless
(never called/used), but the inverse isn't: it results in a crash
because the ebtables traverser doesn't expect a NULL blob for a location
its receiving packets for.

Instead of fixing all the individual checks, do what iptables is doing and
reject all blobs that differ from the expected hooks.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipvtap - add __init/__exit annotations to module init/exit funcs

[ Upstream commit 4b2e3a17e9f279325712b79fb01d1493f9e3e005 ]

Looks to have been left out in an oversight.

Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Sainath Grandhi <sainath.grandhi@intel.com>
Fixes: 235a9d89da97 ('ipvtap: IP-VLAN based tap driver')
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: 802.3ad: fix no transmission of LACPDUs

[ Upstream commit d745b5062ad2b5da90a5e728d7ca884fc07315fd ]

This is caused by the global variable ad_ticks_per_sec being zero as
demonstrated by the reproducer script discussed below. This causes
all timer values in __ad_timer_to_ticks to be zero, resulting
in the periodic timer to never fire.

To reproduce:
Run the script in
`tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which
puts bonding into a state where it never transmits LACPDUs.

line 44: ip link add fbond type bond mode 4 miimon 200 \
            xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 48: ip link set fbond address 52:54:00:3B:7C:A6
setting bond MAC addr
call stack:
    bond->dev->dev_addr = new_mac

line 52: ip link set fbond type bond ad_actor_sys_prio 65535
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 60: ip link set veth1-bond down master fbond
given:
    params.ad_actor_system = 0
    params.mode = BOND_MODE_8023AD
    ad.system.sys_mac_addr == bond->dev->dev_addr
call stack:
    bond_enslave
    -> bond_3ad_initialize(); because first slave
       -> if ad.system.sys_mac_addr != bond->dev->dev_addr
          return
results:
     Nothing is run in bond_3ad_initialize() because dev_addr equals
     sys_mac_addr leaving the global ad_ticks_per_sec zero as it is
     never initialized anywhere else.

The if check around the contents of bond_3ad_initialize() is no longer
needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings
changes immediately") which sets ad.system.sys_mac_addr if any one of
the bonding parameters whos set function calls
bond_3ad_update_ad_actor_settings(). This is because if
ad.system.sys_mac_addr is zero it will be set to the current bond mac
address, this causes the if check to never be true.

Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: moxa: get rid of asymmetry in DMA mapping/unmapping

[ Upstream commit 0ee7828dfc56e97d71e51e6374dc7b4eb2b6e081 ]

Since priv->rx_mapping[i] is maped in moxart_mac_open(), we
should unmap it from moxart_mac_stop(). Fixes 2 warnings.

1. During error unwinding in moxart_mac_probe(): "goto init_fail;",
then moxart_mac_free_memory() calls dma_unmap_single() with
priv->rx_mapping[i] pointers zeroed.

WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980
DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes]
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x34/0x44
 dump_stack_lvl from __warn+0xbc/0x1f0
 __warn from warn_slowpath_fmt+0x94/0xc8
 warn_slowpath_fmt from check_unmap+0x704/0x980
 check_unmap from debug_dma_unmap_page+0x8c/0x9c
 debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8
 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218
 moxart_mac_probe from platform_probe+0x48/0x88
 platform_probe from really_probe+0xc0/0x2e4

2. After commands:
 ip link set dev eth0 down
 ip link set dev eth0 up

WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec
DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported
CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x34/0x44
 dump_stack_lvl from __warn+0xbc/0x1f0
 __warn from warn_slowpath_fmt+0x94/0xc8
 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec
 add_dma_entry from dma_map_page_attrs+0x110/0x328
 dma_map_page_attrs from moxart_mac_open+0x134/0x320
 moxart_mac_open from __dev_open+0x11c/0x1ec
 __dev_open from __dev_change_flags+0x194/0x22c
 __dev_change_flags from dev_change_flags+0x14/0x44
 dev_change_flags from devinet_ioctl+0x6d4/0x93c
 devinet_ioctl from inet_ioctl+0x1ac/0x25c

v1 -> v2:
Extraneous change removed.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()

[ Upstream commit 6dbe852c379ff032a70a6b13a91914918c82cb07 ]

For some MAC drivers, they set the mac_managed_pm to true in its
->ndo_open() callback. So before the mac_managed_pm is set to true,
we still want to leverage the mdio_bus_phy_suspend()/resume() for
the phy device suspend and resume. In this case, the phy device is
in PHY_READY, and we shouldn't warn about this. It also seems that
the check of mac_managed_pm in WARN_ON is redundant since we already
check this in the entry of mdio_bus_phy_resume(), so drop it.

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: don't assume SMEM is page-aligned

[ Upstream commit b8d4380365c515d8e0351f2f46d371738dd19be1 ]

In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed)
and then its virtual address is fetched using qcom_smem_get().  The
physical address associated with that region is also fetched.

The physical address is adjusted so that it is page-aligned, and an
attempt is made to update the size of the region to compensate for
any non-zero adjustment.

But that adjustment isn't done properly.  The physical address is
aligned twice, and as a result the size is never actually adjusted.

Fix this by *not* aligning the "addr" local variable, and instead
making the "phys" local variable be the adjusted "addr" value.

Fixes: a0036bb413d5b ("net: ipa: define SMEM memory region for IPA")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220818134206.567618-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off

[ Upstream commit 550f96432e6f6770efdaee0e65239d61431062a1 ]

The cited commit reintroduced the ability to set hw-tc-offload
in switchdev mode by reusing NIC mode calls without modifying it
to support both modes, this can cause an illegal memory access
when trying to turn hw-tc-offload off.

Fix this by using the right TC_FLAG when checking if tc rules
are installed while disabling hw-tc-offload.

Fixes: d3cbd4254df8 ("net/mlx5e: Add ndo_set_feature for uplink representor")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix wrong application of the LRO state

[ Upstream commit 7b3707fc79044871ab8f3d5fa5e9603155bb5577 ]

Driver caches packet merge type in mlx5e_params instance which must be
in perfect sync with the netdev_feature's bit.
Prior to this patch, in certain conditions (*) LRO state was set in
mlx5e_params, while netdev_feature's bit was off. Causing the LRO to
be applied on the RQs (HW level).

(*) This can happen only on profile init (mlx5e_build_nic_params()),
when RQ expect non-linear SKB and PCI is fast enough in comparison to
link width.

Solution: remove setting of packet merge type from
mlx5e_build_nic_params() as netdev features are not updated.

Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Avoid false positive lockdep warning by adding lock_class_key

[ Upstream commit d59b73a66e5e0682442b6d7b4965364e57078b80 ]

Add a lock_class_key per mlx5 device to avoid a false positive
"possible circular locking dependency" warning by lockdep, on flows
which lock more than one mlx5 device, such as adding SF.

kernel log:
 ======================================================
 WARNING: possible circular locking dependency detected
 5.19.0-rc8+ #2 Not tainted
 ------------------------------------------------------
 kworker/u20:0/8 is trying to acquire lock:
 ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core]

 but task is already holding lock:
 ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&(&notifier->n_head)->rwsem){++++}-{3:3}:
        down_write+0x90/0x150
        blocking_notifier_chain_register+0x53/0xa0
        mlx5_sf_table_init+0x369/0x4a0 [mlx5_core]
        mlx5_init_one+0x261/0x490 [mlx5_core]
        probe_one+0x430/0x680 [mlx5_core]
        local_pci_probe+0xd6/0x170
        work_for_cpu_fn+0x4e/0xa0
        process_one_work+0x7c2/0x1340
        worker_thread+0x6f6/0xec0
        kthread+0x28f/0x330
        ret_from_fork+0x1f/0x30

 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}:
        __lock_acquire+0x2fc7/0x6720
        lock_acquire+0x1c1/0x550
        __mutex_lock+0x12c/0x14b0
        mlx5_init_one+0x2e/0x490 [mlx5_core]
        mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core]
        auxiliary_bus_probe+0x9d/0xe0
        really_probe+0x1e0/0xaa0
        __driver_probe_device+0x219/0x480
        driver_probe_device+0x49/0x130
        __device_attach_driver+0x1b8/0x280
        bus_for_each_drv+0x123/0x1a0
        __device_attach+0x1a3/0x460
        bus_probe_device+0x1a2/0x260
        device_add+0x9b1/0x1b40
        __auxiliary_device_add+0x88/0xc0
        mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core]
        blocking_notifier_call_chain+0xd5/0x130
        mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core]
        process_one_work+0x7c2/0x1340
        worker_thread+0x59d/0xec0
        kthread+0x28f/0x330
        ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&(&notifier->n_head)->rwsem);
                                lock(&dev->intf_state_mutex);
                                lock(&(&notifier->n_head)->rwsem);
   lock(&dev->intf_state_mutex);

  *** DEADLOCK ***

 4 locks held by kworker/u20:0/8:
  #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340
  #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340
  #2: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130
  #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460

 stack backtrace:
 CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core]
 Call Trace:
  <TASK>
  dump_stack_lvl+0x57/0x7d
  check_noncircular+0x278/0x300
  ? print_circular_bug+0x460/0x460
  ? lock_chain_count+0x20/0x20
  ? register_lock_class+0x1880/0x1880
  __lock_acquire+0x2fc7/0x6720
  ? register_lock_class+0x1880/0x1880
  ? register_lock_class+0x1880/0x1880
  lock_acquire+0x1c1/0x550
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? lockdep_hardirqs_on_prepare+0x400/0x400
  __mutex_lock+0x12c/0x14b0
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? _raw_read_unlock+0x1f/0x30
  ? mutex_lock_io_nested+0x1320/0x1320
  ? __ioremap_caller.constprop.0+0x306/0x490
  ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core]
  ? iounmap+0x160/0x160
  mlx5_init_one+0x2e/0x490 [mlx5_core]
  mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core]
  ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core]
  auxiliary_bus_probe+0x9d/0xe0
  really_probe+0x1e0/0xaa0
  __driver_probe_device+0x219/0x480
  ? auxiliary_match_id+0xe9/0x140
  driver_probe_device+0x49/0x130
  __device_attach_driver+0x1b8/0x280
  ? driver_allows_async_probing+0x140/0x140
  bus_for_each_drv+0x123/0x1a0
  ? bus_for_each_dev+0x1a0/0x1a0
  ? lockdep_hardirqs_on_prepare+0x286/0x400
  ? trace_hardirqs_on+0x2d/0x100
  __device_attach+0x1a3/0x460
  ? device_driver_attach+0x1e0/0x1e0
  ? kobject_uevent_env+0x22d/0xf10
  bus_probe_device+0x1a2/0x260
  device_add+0x9b1/0x1b40
  ? dev_set_name+0xab/0xe0
  ? __fw_devlink_link_to_suppliers+0x260/0x260
  ? memset+0x20/0x40
  ? lockdep_init_map_type+0x21a/0x7d0
  __auxiliary_device_add+0x88/0xc0
  ? auxiliary_device_init+0x86/0xa0
  mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core]
  blocking_notifier_call_chain+0xd5/0x130
  mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core]
  ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core]
  ? lock_downgrade+0x6e0/0x6e0
  ? lockdep_hardirqs_on_prepare+0x286/0x400
  process_one_work+0x7c2/0x1340
  ? lockdep_hardirqs_on_prepare+0x400/0x400
  ? pwq_dec_nr_in_flight+0x230/0x230
  ? rwlock_bug.part.0+0x90/0x90
  worker_thread+0x59d/0xec0
  ? process_one_work+0x1340/0x1340
  kthread+0x28f/0x330
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Fixes: 6a3273217469 ("net/mlx5: SF, Port function state change support")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Properly disable vlan strip on non-UL reps

[ Upstream commit f37044fd759b6bc40b6398a978e0b1acdf717372 ]

When querying mlx5 non-uplink representors capabilities with ethtool
rx-vlan-offload is marked as "off [fixed]". However, it is actually always
enabled because mlx5e_params->vlan_strip_disable is 0 by default when
initializing struct mlx5e_params instance. Fix the issue by explicitly
setting the vlan_strip_disable to 'true' for non-uplink representors.

Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: xsk: prohibit usage of non-balanced queue id

[ Upstream commit 5a42f112d367bb4700a8a41f5c12724fde6bfbb9 ]

Fix the following scenario:
1. ethtool -L $IFACE rx 8 tx 96
2. xdpsock -q 10 -t -z

Above refers to a case where user would like to attach XSK socket in
txonly mode at a queue id that does not have a corresponding Rx queue.
At this moment ice's XSK logic is tightly bound to act on a "queue pair",
e.g. both Tx and Rx queues at a given queue id are disabled/enabled and
both of them will get XSK pool assigned, which is broken for the presented
queue configuration. This results in the splat included at the bottom,
which is basically an OOB access to Rx ring array.

To fix this, allow using the ids only in scope of "combined" queues
reported by ethtool. However, logic should be rewritten to allow such
configurations later on, which would end up as a complete rewrite of the
control path, so let us go with this temporary fix.

[420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082
[420160.566359] #PF: supervisor read access in kernel mode
[420160.572657] #PF: error_code(0x0000) - not-present page
[420160.579002] PGD 0 P4D 0
[420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI
[420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G           OE     5.19.0-rc7+ #10
[420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice]
[420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85
[420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282
[420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8
[420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000
[420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000
[420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a
[420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828
[420160.693211] FS:  00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000
[420160.703645] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0
[420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[420160.740707] PKRU: 55555554
[420160.745960] Call Trace:
[420160.750962]  <TASK>
[420160.755597]  ? kmalloc_large_node+0x79/0x90
[420160.762703]  ? __kmalloc_node+0x3f5/0x4b0
[420160.769341]  xp_assign_dev+0xfd/0x210
[420160.775661]  ? shmem_file_read_iter+0x29a/0x420
[420160.782896]  xsk_bind+0x152/0x490
[420160.788943]  __sys_bind+0xd0/0x100
[420160.795097]  ? exit_to_user_mode_prepare+0x20/0x120
[420160.802801]  __x64_sys_bind+0x16/0x20
[420160.809298]  do_syscall_64+0x38/0x90
[420160.815741]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[420160.823731] RIP: 0033:0x7fa86a0dd2fb
[420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48
[420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb
[420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003
[420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000
[420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0
[420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000
[420160.919817]  </TASK>
[420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice]
[420160.977576] CR2: 0000000000000082
[420160.985037] ---[ end trace 0000000000000000 ]---
[420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice]
[420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85
[420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282
[420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8
[420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000
[420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000
[420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a
[420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828
[420161.201505] FS:  00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000
[420161.213628] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0
[420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[420161.257052] PKRU: 55555554

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: xsk: Force rings to be sized to power of 2

[ Upstream commit 296f13ff3854535009a185aaf8e3603266d39d94 ]

With the upcoming introduction of batching to XSK data path,
performance wise it will be the best to have the ring descriptor count
to be aligned to power of 2.

Check if ring sizes that user is going to attach the XSK socket fulfill
the condition above. For Tx side, although check is being done against
the Tx queue and in the end the socket will be attached to the XDP
queue, it is fine since XDP queues get the ring->count setting from Tx
queues.

Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220125160446.78976-3-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout

[ Upstream commit f1e941dbf80a9b8bab0bffbc4cbe41cc7f4c6fb6 ]

When the pn532 uart device is detaching, the pn532_uart_remove()
is called. But there are no functions in pn532_uart_remove() that
could delete the cmd_timeout timer, which will cause use-after-free
bugs. The process is shown below:

    (thread 1)                  |        (thread 2)
                                |  pn532_uart_send_frame
pn532_uart_remove               |    mod_timer(&pn532->cmd_timeout,...)
  ...                           |    (wait a time)
  kfree(pn532) //FREE           |    pn532_cmd_timeout
                                |      pn532_uart_send_frame
                                |        pn532->... //USE

This patch adds del_timer_sync() in pn532_uart_remove() in order to
prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc()
is well synchronized, it sets nfc_dev->shutting_down to true and there
are no syscalls could restart the cmd_timeout timer.

Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: fix the RX FIFO settings when suspending

[ Upstream commit b75d612014447e04abdf0e37ffb8f2fd8b0b49d6 ]

The RX FIFO would be changed when suspending, so the related settings
have to be modified, too. Otherwise, the flow control would work
abnormally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333
Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Fixes: cdf0b86b250f ("r8152: fix a WOL issue")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: fix the units of some registers for RTL8156A

[ Upstream commit 6dc4df12d741c0fe8f885778a43039e0619b9cd9 ]

The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes.

Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rose: check NULL rose_loopback_neigh->loopback

[ Upstream commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ]

Commit 3b3fd068c56e3fbea30090859216a368398e39bf added NULL check for
`rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to
check rose_loopback_neigh->loopback.

It thus prevents *all* rose connect.

The reason is that a special rose_neigh loopback has a NULL device.

/proc/net/rose_neigh illustrates it via rose_neigh_show() function :
[...]
seq_printf(seq, "%05d %-9s %-4s   %3d %3d  %3s     %3s %3lu %3lu",
   rose_neigh->number,
   (rose_neigh->loopback) ? "RSLOOP-0" : ax2asc(buf, &rose_neigh->callsign),
   rose_neigh->dev ? rose_neigh->dev->name : "???",
   rose_neigh->count,

/proc/net/rose_neigh displays special rose_loopback_neigh->loopback as
callsign RSLOOP-0:

addr  callsign  dev  count use mode restart  t0  tf digipeaters
00001 RSLOOP-0  ???      1   2  DCE     yes   0   0

By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called
even in case rose_loopback_neigh->dev is NULL. This repairs rose connections.

Verification with rose client application FPAC:

FPAC-Node v 4.1.3 (built Aug  5 2022) for LINUX (help = h)
F6BVP-4 (Commands = ?) : u
Users - AX.25 Level 2 sessions :
Port   Callsign     Callsign  AX.25 state  ROSE state  NetRom status
axudp  F6BVP-5   -> F6BVP-9   Connected    Connected   ---------

Fixes: 3b3fd068c56e ("rose: Fix Null pointer dereference in rose_send_frame()")
Signed-off-by: Bernard Pidoux <f6bvp@free.fr>
Suggested-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Thomas DL9SAU Osterried <thomas@osterried.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntfs: fix acl handling

[ Upstream commit 0c3bc7899e6dfb52df1c46118a5a670ae619645f ]

While looking at our current POSIX ACL handling in the context of some
overlayfs work I went through a range of other filesystems checking how they
handle them currently and encountered ntfs3.

The posic_acl_{from,to}_xattr() helpers always need to operate on the
filesystem idmapping. Since ntfs3 can only be mounted in the initial user
namespace the relevant idmapping is init_user_ns.

The posix_acl_{from,to}_xattr() helpers are concerned with translating between
the kernel internal struct posix_acl{_entry} and the uapi struct
posix_acl_xattr_{header,entry} and the kernel internal data structure is cached
filesystem wide.

Additional idmappings such as the caller's idmapping or the mount's idmapping
are handled higher up in the VFS. Individual filesystems usually do not need to
concern themselves with these.

The posix_acl_valid() helper is concerned with checking whether the values in
the kernel internal struct posix_acl can be represented in the filesystem's
idmapping. IOW, if they can be written to disk. So this helper too needs to
take the filesystem's idmapping.

Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: ntfs3@lists.linux.dev
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/smaps: don't access young/dirty bit if pte unpresent

[ Upstream commit efd4149342db2df41b1bbe68972ead853b30e444 ]

These bits should only be valid when the ptes are present.  Introducing
two booleans for it and set it to false when !pte_present() for both pte
and pmd accountings.

The bug is found during code reading and no real world issue reported, but
logically such an error can cause incorrect readings for either smaps or
smaps_rollup output on quite a few fields.

For example, it could cause over-estimate on values like Shared_Dirty,
Private_Dirty, Referenced.  Or it could also cause under-estimate on
values like LazyFree, Shared_Clean, Private_Clean.

Link: https://lkml.kernel.org/r/20220805160003.58929-1-peterx@redhat.com
Fixes: b1d4d9e0cbd0 ("proc/smaps: carefully handle migration entries")
Fixes: c94b6923fa0a ("/proc/PID/smaps: Add PMD migration entry parsing")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: RPC level errors should set task->tk_rpc_status

[ Upstream commit ed06fce0b034b2e25bd93430f5c4cbb28036cc1a ]

Fix up a case in call_encode() where we're failing to set
task->tk_rpc_status when an RPC level error occurred.

Fixes: 9c5948c24869 ("SUNRPC: task should be exit if encode return EKEYEXPIRED more times")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2 fix problems with __nfs42_ssc_open

[ Upstream commit fcfc8be1e9cf2f12b50dce8b579b3ae54443a014 ]

A destination server while doing a COPY shouldn't accept using the
passed in filehandle if its not a regular filehandle.

If alloc_file_pseudo() has failed, we need to decrement a reference
on the newly created inode, otherwise it leaks.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: ec4b092508982 ("NFS: inter ssc open")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Don't allocate nfs_fattr on the stack in __nfs42_ssc_open()

[ Upstream commit 156cd28562a4e8ca454d11b234d9f634a45d6390 ]

The preferred behaviour is always to allocate struct nfs_fattr from the
slab.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net: macsec: update SCI upon MAC address change."

[ Upstream commit e82c649e851c9c25367fb7a2a6cf3479187de467 ]

This reverts commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823.

Commit 6fc498bc8292 states:

    SCI should be updated, because it contains MAC in its first 6
    octets.

That's not entirely correct. The SCI can be based on the MAC address,
but doesn't have to be. We can also use any 64-bit number as the
SCI. When the SCI based on the MAC address, it uses a 16-bit "port
number" provided by userspace, which commit 6fc498bc8292 overwrites
with 1.

In addition, changing the SCI after macsec has been setup can just
confuse the receiver. If we configure the RXSC on the peer based on
the original SCI, we should keep the same SCI on TX.

When the macsec device is being managed by a userspace key negotiation
daemon such as wpa_supplicant, commit 6fc498bc8292 would also
overwrite the SCI defined by userspace.

Fixes: 6fc498bc8292 ("net: macsec: update SCI upon MAC address change.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: use eth_hw_addr_set() instead of ether_addr_copy()

[ Upstream commit e35b8d7dbb094c79daf920797c372911edc2d525 ]

Convert from ether_addr_copy() to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - ether_addr_copy(dev->dev_addr, np)
  + eth_hw_addr_set(dev, np)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: require CAP_SYS_ADMIN in target namespace for idmapped mounts

[ Upstream commit bf1ac16edf6770a92bc75cf2373f1f9feea398a4 ]

Idmapped mounts should not allow a user to map file ownsership into a
range of ids which is not under the control of that user. However, we
currently don't check whether the mounter is privileged wrt to the
target user namespace.

Currently no FS_USERNS_MOUNT filesystems support idmapped mounts, thus
this is not a problem as only CAP_SYS_ADMIN in init_user_ns is allowed
to set up idmapped mounts. But this could change in the future, so add a
check to refuse to create idmapped mounts when the mounter does not have
CAP_SYS_ADMIN in the target user namespace.

Fixes: bd303368b776 ("fs: support mapped mounts of mapped filesystems")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220816164752.2595240-1-sforshee@digitalocean.com
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: policy: fix metadata dst->dev xmit null pointer dereference

[ Upstream commit 17ecd4a4db4783392edd4944f5e8268205083f70 ]

When we try to transmit an skb with metadata_dst attached (i.e. dst->dev
== NULL) through xfrm interface we can hit a null pointer dereference[1]
in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a
loopback skb device when there's no policy which dereferences dst->dev
unconditionally. Not having dst->dev can be interepreted as it not being
a loopback device, so just add a check for a null dst_orig->dev.

With this fix xfrm interface's Tx error counters go up as usual.

[1] net-next calltrace captured via netconsole:
  BUG: kernel NULL pointer dereference, address: 00000000000000c0
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP
  CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
  RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60
  Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02
  RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80
  RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880
  R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
  FS:  00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0
  Call Trace:
   <TASK>
   xfrmi_xmit+0xde/0x460
   ? tcf_bpf_act+0x13d/0x2a0
   dev_hard_start_xmit+0x72/0x1e0
   __dev_queue_xmit+0x251/0xd30
   ip_finish_output2+0x140/0x550
   ip_push_pending_frames+0x56/0x80
   raw_sendmsg+0x663/0x10a0
   ? try_charge_memcg+0x3fd/0x7a0
   ? __mod_memcg_lruvec_state+0x93/0x110
   ? sock_sendmsg+0x30/0x40
   sock_sendmsg+0x30/0x40
   __sys_sendto+0xeb/0x130
   ? handle_mm_fault+0xae/0x280
   ? do_user_addr_fault+0x1e7/0x680
   ? kvm_read_and_reset_apf_flags+0x3b/0x50
   __x64_sys_sendto+0x20/0x30
   do_syscall_64+0x34/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0
  RIP: 0033:0x7ff35cac1366
  Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
  RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
  RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366
  RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003
  RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
  R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001
   </TASK>
  Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole]
  CR2: 00000000000000c0

CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_key: Do not call xfrm_probe_algs in parallel

[ Upstream commit ba953a9d89a00c078b85f4b190bc1dde66fe16b5 ]

When namespace support was added to xfrm/afkey, it caused the
previously single-threaded call to xfrm_probe_algs to become
multi-threaded.  This is buggy and needs to be fixed with a mutex.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Fixes: 283bc9f35bbb ("xfrm: Namespacify xfrm state/policy locks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: clone missing x->lastused in xfrm_do_migrate

[ Upstream commit 6aa811acdb76facca0b705f4e4c1d948ccb6af8b ]

x->lastused was not cloned in xfrm_do_migrate. Add it to clone during
migrate.

Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: fix refcount leak in __xfrm_policy_check()

[ Upstream commit 9c9cb23e00ddf45679b21b4dacc11d1ae7961ebe ]

The issue happens on an error path in __xfrm_policy_check(). When the
fetching process of the object `pols[1]` fails, the function simply
returns 0, forgetting to decrement the reference count of `pols[0]`,
which is incremented earlier by either xfrm_sk_policy_lookup() or
xfrm_policy_lookup(). This may result in memory leaks.

Fix it by decreasing the reference count of `pols[0]` in that path.

Fixes: 134b0fc544ba ("IPsec: propagate security module errors up from flow_cache_lookup")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: lib: uaccess: fix CSR_STATUS SR_SUM bit

[ Upstream commit c08b4848f596fd95543197463b5162bd7bab2442 ]

Since commit 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
and commit ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code"),
if __clear_user and __copy_user return from an fixup branch,
CSR_STATUS SR_SUM bit will be set, it is a vulnerability, so that
S-mode memory accesses to pages that are accessible by U-mode will success.
Disable S-mode access to U-mode memory should clear SR_SUM bit.

Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Fixes: ebcbd75e3962 ("riscv: Fix the bug in memory access fixup code")
Signed-off-by: Chen Lifu <chenlifu@huawei.com>
Reviewed-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20220615014714.1650349-1-chenlifu@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: lib: uaccess: fold fixups into body

[ Upstream commit 9d504f9aa5c1b76673018da9503e76b351a24b8c ]

uaccess functions such __asm_copy_to_user(),  __arch_copy_from_user()
and __clear_user() place their exception fixups in the `.fixup` section
without any clear association with themselves. If we backtrace the
fixup code, it will be symbolized as an offset from the nearest prior
symbol.

Similar as arm64 does, we must move fixups into the body of the
functions themselves, after the usual fast-path returns.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: remove unnecessary parameter delalloc_start for writepage_delalloc()

[ Upstream commit cf3075fb36c6a98ea890f4a50b4419ff2fff9a2f ]

In function __extent_writepage() we always pass page start to
@delalloc_start for writepage_delalloc().

Thus we don't really need @delalloc_start parameter as we can extract it
from @page.

Remove @delalloc_start parameter and make __extent_writepage() to
declare @page_start and @page_end as const.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: pass the dentry to btrfs_log_new_name() instead of the inode

[ Upstream commit d5f5bd546552a94eefd68c42f40f778c40a89d2c ]

In the next patch in the series, there will be the need to access the old
name, and its length, of an inode when logging the inode during a rename.
So instead of passing the inode to btrfs_log_new_name() pass the dentry,
because from the dentry we can get the inode, the name and its length.

This will avoid passing 3 new parameters to btrfs_log_new_name() in the
next patch - the name, its length and an index number. This way we end
up passing only 1 new parameter, the index number.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: put initial index value of a directory in a constant

[ Upstream commit 528ee697126fddaff448897c2d649bd756153c79 ]

At btrfs_set_inode_index_count() we refer twice to the number 2 as the
initial index value for a directory (when it's empty), with a proper
comment explaining the reason for that value. In the next patch I'll
have to use that magic value in the directory logging code, so put
the value in a #define at btrfs_inode.h, to avoid hardcoding the
magic value again at tree-log.c.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Fix dropped IKE message

[ Upstream commit c019cd656e717349ff22d0c41d6fbfc773f48c52 ]

This patch fixes IKE message being dropped due to error in processing Purex
IOCB and Continuation IOCBs.

Link: https://lore.kernel.org/r/20220713052045.10683-6-njavali@marvell.com
Fixes: fac2807946c1 ("scsi: qla2xxx: edif: Add extraction of auth_els from the wire")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix response queue handler reading stale packets

[ Upstream commit b1f707146923335849fb70237eec27d4d1ae7d62 ]

On some platforms, the current logic of relying on finding new packet
solely based on signature pattern can lead to driver reading stale
packets. Though this is a bug in those platforms, reduce such exposures by
limiting reading packets until the IN pointer.

Two module parameters are introduced:

  ql2xrspq_follow_inptr:

    When set, on newer adapters that has queue pointer shadowing, look for
    response packets only until response queue in pointer.

    When reset, response packets are read based on a signature pattern
    logic (old way).

  ql2xrspq_follow_inptr_legacy:

    Like ql2xrspq_follow_inptr, but for those adapters where there is no
    queue pointer shadowing.

Link: https://lore.kernel.org/r/20220713052045.10683-5-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist

[ Upstream commit 7ee951acd31a88f941fd6535fbdee3a1567f1d63 ]

Using bin_attributes with a 0 size causes fstat and friends to return that
0 size. This breaks userspace code that retrieves the size before reading
the file. Rather than reverting 75bd50fa841 ("drivers/base/node.c: use
bin_attribute to break the size limitation of cpumap ABI") let's put in a
size value at compile time.

For cpulist the maximum size is on the order of
NR_CPUS * (ceil(log10(NR_CPUS)) + 1)/2

which for 8192 is 20480 (8192 * 5)/2. In order to get near that you'd need
a system with every other CPU on one node. For example: (0,2,4,8, ... ).
To simplify the math and support larger NR_CPUS in the future we are using
(NR_CPUS * 7)/2. We also set it to a min of PAGE_SIZE to retain the older
behavior for smaller NR_CPUS.

The cpumap file the size works out to be NR_CPUS/4 + NR_CPUS/32 - 1
(or NR_CPUS * 9/32 - 1) including the ","s.

Add a set of macros for these values to cpumask.h so they can be used in
multiple places. Apply these to the handful of such files in
drivers/base/topology.c as well as node.c.

As an example, on an 80 cpu 4-node system (NR_CPUS == 8192):

before:

-r--r--r--. 1 root root 0 Jul 12 14:08 system/node/node0/cpulist
-r--r--r--. 1 root root 0 Jul 11 17:25 system/node/node0/cpumap

after:

-r--r--r--. 1 root root 28672 Jul 13 11:32 system/node/node0/cpulist
-r--r--r--. 1 root root  4096 Jul 13 11:31 system/node/node0/cpumap

CONFIG_NR_CPUS = 16384
-r--r--r--. 1 root root 57344 Jul 13 14:03 system/node/node0/cpulist
-r--r--r--. 1 root root  4607 Jul 13 14:02 system/node/node0/cpumap

The actual number of cpus doesn't matter for the reported size since they
are based on NR_CPUS.

Fixes: 75bd50fa841d ("drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI")
Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Yury Norov <yury.norov@gmail.com> (for include/linux/cpumask.h)
Signed-off-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220715134924.3466194-1-pauld@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - add additional TUXEDO devices to i8042 quirk tables

[ Upstream commit 436d219069628f0f0ed27f606224d4ee02a0ca17 ]

A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220708161005.1251929-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - add TUXEDO devices to i8042 quirk tables

[ Upstream commit a6a87c36165e6791eeaed88025cde270536c3198 ]

A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.

The list is quite massive as neither the TUXEDO nor the Clevo dmi strings
have been very consistent historically. I tried to keep the list as short
as possible without risking on missing an affected device.

This is revision 3. The Clevo N150CU barebone is still removed as it might
have problems with the fix and needs further investigations. The
SchenkerTechnologiesGmbH System-/Board-Vendor string variations are
added. This is now based in the quirk table refactor. This now also
includes the additional noaux flag for the NS7xMU.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220629112725.12922-5-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - merge quirk tables

[ Upstream commit ff946268a0813c35b790dfbe07c3bfaa7bfb869c ]

Merge i8042 quirk tables to reduce code duplication for devices that need
more than one quirk. Before every quirk had its own table with devices
needing that quirk. If a new quirk needed to be added a new table had to
be created. When a device needed multiple quirks, it appeared in multiple
tables. Now only one table called i8042_dmi_quirk_table exists. In it every
device has one entry and required quirks are coded in the .driver_data
field of the struct dmi_system_id used by this table. Multiple quirks for
one device can be applied by bitwise-or of the new SERIO_QUIRK_* defines.

Also align quirkable options with command line parameters and make vendor
wide quirks per device overwriteable on a per device basis. The first match
is honored while following matches are ignored. So when a vendor wide quirk
is defined in the table, a device can inserted before and therefore
ignoring the vendor wide define.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220629112725.12922-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: i8042 - move __initconst to fix code styling warning

[ Upstream commit 95a9916c909f0b1d95e24b4232b4bc38ff755415 ]

Move __intconst from before i8042_dmi_laptop_table[] to after it for
consistent code styling.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220629112725.12922-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: convert count_max_extents() to use fs_info->max_extent_size

commit 7d7672bc5d1038c745716c397d892d21e29de71c upstream

If count_max_extents() uses BTRFS_MAX_EXTENT_SIZE to calculate the number
of extents needed, btrfs release the metadata reservation too much on its
way to write out the data.

Now that BTRFS_MAX_EXTENT_SIZE is replaced with fs_info->max_extent_size,
convert count_max_extents() to use it instead, and fix the calculation of
the metadata reservation.

CC: stable@vger.kernel.org # 5.12+
Fixes: d8e3fb106f39 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size

commit f7b12a62f008a3041f42f2426983e59a6a0a3c59 upstream

On zoned filesystem, data write out is limited by max_zone_append_size,
and a large ordered extent is split according the size of a bio. OTOH,
the number of extents to be written is calculated using
BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the
metadata bytes to update and/or create the metadata items.

The metadata reservation is done at e.g, btrfs_buffered_write() and then
released according to the estimation changes. Thus, if the number of extent
increases massively, the reserved metadata can run out.

The increase of the number of extents easily occurs on zoned filesystem
if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the
following warning on a small RAM environment with disabling metadata
over-commit (in the following patch).

[75721.498492] ------------[ cut here ]------------
[75721.505624] BTRFS: block rsv 1 returned -28
[75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G        W         5.18.0-rc2-BTRFS-ZNS+ #109
[75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
[75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286
[75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000
[75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e
[75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7
[75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28
[75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a
[75721.701878] FS:  0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000
[75721.712601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0
[75721.730499] Call Trace:
[75721.735166]  <TASK>
[75721.739886]  btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs]
[75721.747545]  ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs]
[75721.756145]  ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.762852]  ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.769520]  ? push_leaf_left+0x420/0x620 [btrfs]
[75721.776431]  ? memcpy+0x4e/0x60
[75721.781931]  split_leaf+0x433/0x12d0 [btrfs]
[75721.788392]  ? btrfs_get_token_32+0x580/0x580 [btrfs]
[75721.795636]  ? push_for_double_split.isra.0+0x420/0x420 [btrfs]
[75721.803759]  ? leaf_space_used+0x15d/0x1a0 [btrfs]
[75721.811156]  btrfs_search_slot+0x1bc3/0x2790 [btrfs]
[75721.818300]  ? lock_downgrade+0x7c0/0x7c0
[75721.824411]  ? free_extent_buffer.part.0+0x107/0x200 [btrfs]
[75721.832456]  ? split_leaf+0x12d0/0x12d0 [btrfs]
[75721.839149]  ? free_extent_buffer.part.0+0x14f/0x200 [btrfs]
[75721.846945]  ? free_extent_buffer+0x13/0x20 [btrfs]
[75721.853960]  ? btrfs_release_path+0x4b/0x190 [btrfs]
[75721.861429]  btrfs_csum_file_blocks+0x85c/0x1500 [btrfs]
[75721.869313]  ? rcu_read_lock_sched_held+0x16/0x80
[75721.876085]  ? lock_release+0x552/0xf80
[75721.881957]  ? btrfs_del_csums+0x8c0/0x8c0 [btrfs]
[75721.888886]  ? __kasan_check_write+0x14/0x20
[75721.895152]  ? do_raw_read_unlock+0x44/0x80
[75721.901323]  ? _raw_write_lock_irq+0x60/0x80
[75721.907983]  ? btrfs_global_root+0xb9/0xe0 [btrfs]
[75721.915166]  ? btrfs_csum_root+0x12b/0x180 [btrfs]
[75721.921918]  ? btrfs_get_global_root+0x820/0x820 [btrfs]
[75721.929166]  ? _raw_write_unlock+0x23/0x40
[75721.935116]  ? unpin_extent_cache+0x1e3/0x390 [btrfs]
[75721.942041]  btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs]
[75721.949906]  ? try_to_wake_up+0x30/0x14a0
[75721.955700]  ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs]
[75721.962661]  ? rcu_read_lock_sched_held+0x16/0x80
[75721.969111]  ? lock_acquire+0x41b/0x4c0
[75721.974982]  finish_ordered_fn+0x15/0x20 [btrfs]
[75721.981639]  btrfs_work_helper+0x1af/0xa80 [btrfs]
[75721.988184]  ? _raw_spin_unlock_irq+0x28/0x50
[75721.994643]  process_one_work+0x815/0x1460
[75722.000444]  ? pwq_dec_nr_in_flight+0x250/0x250
[75722.006643]  ? do_raw_spin_trylock+0xbb/0x190
[75722.013086]  worker_thread+0x59a/0xeb0
[75722.018511]  kthread+0x2ac/0x360
[75722.023428]  ? process_one_work+0x1460/0x1460
[75722.029431]  ? kthread_complete_and_exit+0x30/0x30
[75722.036044]  ret_from_fork+0x22/0x30
[75722.041255]  </TASK>
[75722.045047] irq event stamp: 0
[75722.049703] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[75722.057610] hardirqs last disabled at (0): [<ffffffff8118a94a>] copy_process+0x1c1a/0x66b0
[75722.067533] softirqs last  enabled at (0): [<ffffffff8118a989>] copy_process+0x1c59/0x66b0
[75722.077423] softirqs last disabled at (0): [<0000000000000000>] 0x0
[75722.085335] ---[ end trace 0000000000000000 ]---

To fix the estimation, we need to introduce fs_info->max_extent_size to
replace BTRFS_MAX_EXTENT_SIZE, which allow setting the different size for
regular vs zoned filesystem.

Set fs_info->max_extent_size to BTRFS_MAX_EXTENT_SIZE by default. On zoned
filesystem, it is set to fs_info->max_zone_append_size.

CC: stable@vger.kernel.org # 5.12+
Fixes: d8e3fb106f39 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: revive max_zone_append_bytes

commit c2ae7b772ef4e86c5ddf3fd47bf59045ae96a414 upstream

This patch is basically a revert of commit 5a80d1c6a270 ("btrfs: zoned:
remove max_zone_append_size logic"), but without unnecessary ASSERT and
check. The max_zone_append_size will be used as a hint to estimate the
number of extents to cover delalloc/writeback region in the later commits.

The size of a ZONE APPEND bio is also limited by queue_max_segments(), so
this commit considers it to calculate max_zone_append_size. Technically, a
bio can be larger than queue_max_segments() * PAGE_SIZE if the pages are
contiguous. But, it is safe to consider "queue_max_segments() * PAGE_SIZE"
as an upper limit of an extent size to calculate the number of extents
needed to write data.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: add bdev_max_segments() helper

commit 65ea1b66482f415d51cd46515b02477257330339 upstream

Add bdev_max_segments() like other queue parameters.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: add a bdev_max_zone_append_sectors helper

commit 2aba0d19f4d8c8929b4b3b94a9cfde2aa20e6ee2 upstream

Add a helper to check the max supported sectors for zone append based on
the block_device instead of having to poke into the block layer internal
request_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Move CLD to the start of the idtentry macro

commit c64cc2802a784ecfd25d39945e57e7a147854a5b upstream.

Move it after CLAC.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220503032107.680190-5-jiangshanlai@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/sys_ni: add compat entry for fadvise64_64

commit a8faed3a02eeb75857a3b5d660fa80fe79db77a3 upstream.

When CONFIG_ADVISE_SYSCALLS is not set/enabled and CONFIG_COMPAT is
set/enabled, the riscv compat_syscall_table references
'compat_sys_fadvise64_64', which is not defined:

riscv64-linux-ld: arch/riscv/kernel/compat_syscall_table.o:(.rodata+0x6f8):
undefined reference to `compat_sys_fadvise64_64'

Add 'fadvise64_64' to kernel/sys_ni.c as a conditional COMPAT function so
that when CONFIG_ADVISE_SYSCALLS is not set, there is a fallback function
available.

Link: https://lkml.kernel.org/r/20220807220934.5689-1-rdunlap@infradead.org
Fixes: d3ac21cacc24 ("mm: Support compiling out madvise and fadvise")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix exception handler for fldw and fstw instructions

commit 7ae1f5508d9a33fd58ed3059bd2d569961e3b8bd upstream.

The exception handler is broken for unaligned memory acceses with fldw
and fstw instructions, because it trashes or uses randomly some other
floating point register than the one specified in the instruction word
on loads and stores.

The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw
instructions) encode the target register (%fr22) in the rightmost 5 bits
of the instruction word. The 7th rightmost bit of the instruction word
defines if the left or right half of %fr22 should be used.

While processing unaligned address accesses, the FR3() define is used to
extract the offset into the local floating-point register set.  But the
calculation in FR3() was buggy, so that for example instead of %fr22,
register %fr12 [((22 * 2) & 0x1f) = 12] was used.

This bug has been since forever in the parisc kernel and I wonder why it
wasn't detected earlier. Interestingly I noticed this bug just because
the libime debian package failed to build on *native* hardware, while it
successfully built in qemu.

This patch corrects the bitshift and masking calculation in FR3().

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Make CONFIG_64BIT available for ARCH=parisc64 only

commit 3dcfb729b5f4a0c9b50742865cd5e6c4dbcc80dc upstream.

With this patch the ARCH= parameter decides if the
CONFIG_64BIT option will be set or not. This means, the
ARCH= parameter will give:

ARCH=parisc -> 32-bit kernel
ARCH=parisc64 -> 64-bit kernel

This simplifies the usage of the other config options like
randconfig, allmodconfig and allyesconfig a lot and produces
the output which is expected for parisc64 (64-bit) vs. parisc (32-bit).

Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Fix race condition at rebind_subsystems()

commit 763f4fb76e24959c370cdaa889b2492ba6175580 upstream.

Root cause:
The rebind_subsystems() is no lock held when move css object from A
list to B list,then let B's head be treated as css node at
list_for_each_entry_rcu().

Solution:
Add grace period before invalidating the removed rstat_css_node.

Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Link: https://lore.kernel.org/linux-arm-kernel/d8f0bc5e2fb6ed259f9334c83279b4c011283c41.camel@mediatek.com/T/
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Fixes: a7df69b81aac ("cgroup: rstat: support cgroup1")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix potential double free on error path from fsnotify_add_inode_mark

commit ad982c3be4e60c7d39c03f782733503cbd88fd2a upstream.

Audit_alloc_mark() assign pathname to audit_mark->path, on error path
from fsnotify_add_inode_mark(), fsnotify_put_mark will free memory
of audit_mark->path, but the caller of audit_alloc_mark will free
the pathname again, so there will be double free problem.

Fix this by resetting audit_mark->path to NULL pointer on error path
from fsnotify_add_inode_mark().

Cc: stable@vger.kernel.org
Fixes: 7b1293234084d ("fsnotify: Add group pointer in fsnotify_init_mark()")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eth: sun: cassini: remove dead code

commit 32329216ca1d6ee29c41215f18b3053bb6158541 upstream.

Fixes the following GCC warning:

drivers/net/ethernet/sun/cassini.c:1316:29: error: comparison between two arrays [-Werror=array-compare]
drivers/net/ethernet/sun/cassini.c:3783:34: error: comparison between two arrays [-Werror=array-compare]

Note that 2 arrays should be compared by comparing of their addresses:
note: use ‘&cas_prog_workaroundtab[0] == &cas_prog_null[0]’ to compare the addresses

Signed-off-by: Martin Liska <mliska@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: rtlwifi: remove always-true condition pointed out by GCC 12

commit ee3db469dd317e82f57b13aa3bc61be5cb60c2b4 upstream.

The .value is a two-dim array, not a pointer.

struct iqk_matrix_regs {
bool iqk_done;
        long value[1][IQK_MATRIX_REG_NUM];
};

Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.63

Link: https://lore.kernel.org/r/20220823080059.091088642@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220824065913.068916566@linuxfoundation.org
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*

[ Upstream commit 29d650f7e3ab55283b89c9f5883d0c256ce478b5 ]

Syzbot tripped over the following complaint from the kernel:

WARNING: CPU: 2 PID: 15402 at mm/util.c:597 kvmalloc_node+0x11e/0x125 mm/util.c:597

While trying to run XFS_IOC_GETBMAP against the following structure:

struct getbmap fubar = {
.bmv_count = 0x22dae649,
};

Obviously, this is a crazy huge value since the next thing that the
ioctl would do is allocate 37GB of memory.  This is enough to make
kvmalloc mad, but isn't large enough to trip the validation functions.
In other words, I'm fussing with checks that were **already sufficient**
because that's easier than dealing with 644 internal bug reports.  Yes,
that's right, six hundred and forty-four.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: revert "xfs: actually bump warning counts when we send warnings"

[ Upstream commit bc37e4fb5cac2925b2e286b1f1d4fc2b519f7d92 ]

This reverts commit 4b8628d57b725b32616965e66975fcdebe008fe7.

XFS quota has had the concept of a "quota warning limit" since
the earliest Irix implementation, but a mechanism for incrementing
the warning counter was never implemented, as documented in the
xfs_quota(8) man page. We do know from the historical archive that
it was never incremented at runtime during quota reservation
operations.

With this commit, the warning counter quickly increments for every
allocation attempt after the user has crossed a quote soft
limit threshold, and this in turn transitions the user to hard
quota failures, rendering soft quota thresholds and timers useless.
This was reported as a regression by users.

Because the intended behavior of this warning counter has never been
understood or documented, and the result of this change is a regression
in soft quota functionality, revert this commit to make soft quota
limits and timers operable again.

Fixes: 4b8628d57b72 ("xfs: actually bump warning counts when we send warnings)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix soft lockup via spinning in filestream ag selection loop

[ Upstream commit f650df7171b882dca737ddbbeb414100b31f16af ]

The filestream AG selection loop uses pagf data to aid in AG
selection, which depends on pagf initialization. If the in-core
structure is not initialized, the caller invokes the AGF read path
to do so and carries on. If another task enters the loop and finds
a pagf init already in progress, the AGF read returns -EAGAIN and
the task continues the loop. This does not increment the current ag
index, however, which means the task spins on the current AGF buffer
until unlocked.

If the AGF read I/O submitted by the initial task happens to be
delayed for whatever reason, this results in soft lockup warnings
via the spinning task. This is reproduced by xfs/170. To avoid this
problem, fix the AGF trylock failure path to properly iterate to the
next AG. If a task iterates all AGs without making progress, the
trylock behavior is dropped in favor of blocking locks and thus a
soft lockup is no longer possible.

Fixes: f48e2df8a877ca1c ("xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix overfilling of reserve pool

[ Upstream commit 82be38bcf8a2e056b4c99ce79a3827fa743df6ec ]

Due to cycling of m_sb_lock, it's possible for multiple callers of
xfs_reserve_blocks to race at changing the pool size, subtracting blocks
from fdblocks, and actually putting it in the pool.  The result of all
this is that we can overfill the reserve pool to hilarious levels.

xfs_mod_fdblocks, when called with a positive value, already knows how
to take freed blocks and either fill the reserve until it's full, or put
them in fdblocks.  Use that instead of setting m_resblks_avail directly.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: always succeed at setting the reserve pool size

[ Upstream commit 0baa2657dc4d79202148be79a3dc36c35f425060 ]

Nowadays, xfs_mod_fdblocks will always choose to fill the reserve pool
with freed blocks before adding to fdblocks.  Therefore, we can change
the behavior of xfs_reserve_blocks slightly -- setting the target size
of the pool should always succeed, since a deficiency will eventually
be made up as blocks get freed.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: remove infinite loop when reserving free block pool

[ Upstream commit 15f04fdc75aaaa1cccb0b8b3af1be290e118a7bc ]

Infinite loops in kernel code are scary.  Calls to xfs_reserve_blocks
should be rare (people should just use the defaults!) so we really don't
need to try so hard.  Simplify the logic here by removing the infinite
loop.

Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: reserve quota for target dir expansion when renaming files

[ Upstream commit 41667260bc84db4dfe566e3f6ab6da5293d60d8d ]

XFS does not reserve quota for directory expansion when renaming
children into a directory.  This means that we don't reject the
expansion with EDQUOT when we're at or near a hard limit, which means
that unprivileged userspace can use rename() to exceed quota.

Rename operations don't always expand the target directory, and we allow
a rename to proceed with no space reservation if we don't need to add a
block to the target directory to handle the addition.  Moreover, the
unlink operation on the source directory generally does not expand the
directory (you'd have to free a block and then cause a btree split) and
it's probably of little consequence to leave the corner case that
renaming a file out of a directory can increase its size.

As with link and unlink, there is a further bug in that we do not
trigger the blockgc workers to try to clear space when we're out of
quota.

Because rename is its own special tricky animal, we'll patch xfs_rename
directly to reserve quota to the rename transaction.  We'll leave
cleaning up the rest of xfs_rename for the metadata directory tree
patchset.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: reserve quota for dir expansion when linking/unlinking files

[ Upstream commit 871b9316e7a778ff97bdc34fdb2f2977f616651d ]

XFS does not reserve quota for directory expansion when linking or
unlinking children from a directory.  This means that we don't reject
the expansion with EDQUOT when we're at or near a hard limit, which
means that unprivileged userspace can use link()/unlink() to exceed
quota.

The fix for this is nuanced -- link operations don't always expand the
directory, and we allow a link to proceed with no space reservation if
we don't need to add a block to the directory to handle the addition.
Unlink operations generally do not expand the directory (you'd have to
free a block and then cause a btree split) and we can defer the
directory block freeing if there is no space reservation.

Moreover, there is a further bug in that we do not trigger the blockgc
workers to try to clear space when we're out of quota.

To fix both cases, create a new xfs_trans_alloc_dir function that
allocates the transaction, locks and joins the inodes, and reserves
quota for the directory.  If there isn't sufficient space or quota,
we'll switch the caller to reservationless mode.  This should prevent
quota usage overruns with the least restriction in functionality.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: flush inodegc workqueue tasks before cancel

[ Upstream commit 6191cf3ad59fda5901160633fef8e41b064a5246 ]

The xfs_inodegc_stop() helper performs a high level flush of pending
work on the percpu queues and then runs a cancel_work_sync() on each
of the percpu work tasks to ensure all work has completed before
returning.  While cancel_work_sync() waits for wq tasks to complete,
it does not guarantee work tasks have started. This means that the
_stop() helper can queue and instantly cancel a wq task without
having completed the associated work. This can be observed by
tracepoint inspection of a simple "rm -f <file>; fsfreeze -f <mnt>"
test:

xfs_destroy_inode: ... ino 0x83 ...
xfs_inode_set_need_inactive: ... ino 0x83 ...
xfs_inodegc_stop: ...
...
xfs_inodegc_start: ...
xfs_inodegc_worker: ...
xfs_inode_inactivating: ... ino 0x83 ...

The first few lines show that the inode is removed and need inactive
state set, but the inactivation work has not completed before the
inodegc mechanism stops. The inactivation doesn't actually occur
until the fs is unfrozen and the gc mechanism starts back up. Note
that this test requires fsfreeze to reproduce because xfs_freeze
indirectly invokes xfs_fs_statfs(), which calls xfs_inodegc_flush().

When this occurs, the workqueue try_to_grab_pending() logic first
tries to steal the pending bit, which does not succeed because the
bit has been set by queue_work_on(). Subsequently, it checks for
association of a pool workqueue from the work item under the pool
lock. This association is set at the point a work item is queued and
cleared when dequeued for processing. If the association exists, the
work item is removed from the queue and cancel_work_sync() returns
true. If the pwq association is cleared, the remove attempt assumes
the task is busy and retries (eventually returning false to the
caller after waiting for the work task to complete).

To avoid this race, we can flush each work item explicitly before
cancel. However, since the _queue_all() already schedules each
underlying work item, the workqueue level helpers are sufficient to
achieve the same ordering effect. E.g., the inodegc enabled flag
prevents scheduling any further work in the _stop() case. Use the
drain_workqueue() helper in this particular case to make the intent
a bit more self explanatory.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufs-mediatek: Fix build error and type mismatch

commit f54912b228a8df6c0133e31bc75628677bb8c6e5 upstream.

If CONFIG_PM_SLEEP is not set.

make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail:

drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’:
drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
    snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
                                             ~^   ~~~~~~
                                             %lu
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’:
drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration]
  ret = ufshcd_system_suspend(dev);
        ^~~~~~~~~~~~~~~~~~~~~
        ufs_mtk_system_suspend
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’:
drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration]
  return ufshcd_system_resume(dev);
         ^~~~~~~~~~~~~~~~~~~~
         ufs_mtk_system_resume
cc1: some warnings being treated as errors

The declaration of func "ufshcd_system_suspend()" depends on
CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should
wrapped by CONFIG_PM_SLEEP too.

Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com
Fixes: 3fd23b8dfb54 ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[only take the suspend/resume portion of the commit - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: j1939: j1939_sk_queue_activate_next_locked(): replace WARN_ON_ONCE with netdev_warn_once()

commit 8ef49f7f8244424adcf4a546dba4cbbeb0b09c09 upstream.

We should warn user-space that it is doing something wrong when trying
to activate sessions with identical parameters but WARN_ON_ONCE macro
can not be used here as it serves a different purpose.

So it would be good to replace it with netdev_warn_once() message.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20220729143655.1108297-1-pchelkin@ispras.ru
[mkl: fix indention]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0

[ Upstream commit 74de14fe05dd6b151d73cb0c73c8ec874cbdcde6 ]

When CONFIG_XPA is enabled, Clang warns:

  arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
          if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
                              ^
  arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
  # define _PAGE_NO_EXEC          (1 << _PAGE_NO_EXEC_SHIFT)
                                     ^
  arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
          if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
                                ^
  arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
  # define _PAGE_NO_EXEC          (1 << _PAGE_NO_EXEC_SHIFT)
                                     ^
  2 errors generated.

_PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the
build and runtime configuration, which is what the negation operators
are trying to convey. To silence the warning, explicitly compare against
0 so the result of the '<<' operator is not implicitly converted to a
boolean.

According to its documentation, GCC enables -Wint-in-bool-context with
-Wall but this warning is not visible when building the same
configuration with GCC. It appears GCC only warns when compiling C++,
not C, although the documentation makes no note of this:
https://godbolt.org/z/x39q3brxf

Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: i740fb: Check the argument of i740_calc_vclk()

[ Upstream commit 40bf722f8064f50200b8c4f8946cd625b441dda9 ]

Since the user can control the arguments of the ioctl() from the user
space, under special arguments that may result in a divide-by-zero bug.

If the user provides an improper 'pixclock' value that makes the argumet
of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a
divide-by-zero bug in:
    drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));

The following log can reveal it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:i740_calc_vclk drivers/video/fbdev/i740fb.c:353 [inline]
RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:646 [inline]
RIP: 0010:i740fb_set_par+0x163f/0x3b70 drivers/video/fbdev/i740fb.c:742
Call Trace:
 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034
 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189

Fix this by checking the argument of i740_calc_vclk() first.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

venus: pm_helpers: Fix warning in OPP during probe

[ Upstream commit 1d95af02f23031c2e1cca7607c514b86ce85bc6e ]

Fix the following WARN triggered during Venus driver probe on
5.19.0-rc8-next-20220728:

 WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610
 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor
  qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+)
  videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched
  snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_bus qcom_stats
  drm_display_helper qcom_pil_info soundwire_bus snd_soc_lpass_va_macro mc qcom_q6v5
  phy_qcom_snps_femto_v2 qcom_rng snd_soc_lpass_macro_common snd_soc_lpass_wsa_macro
  lpass_gfm_sm8250 slimbus qcom_sysmon qcom_common qcom_glink_smem qmi_helpers
  qcom_wdt mdt_loader socinfo icc_osm_l3 display_connector
  drm_kms_helper qnoc_sm8250 drm fuse ip_tables x_tables ipv6
 CPU: 7 PID: 339 Comm: systemd-udevd Not tainted 5.19.0-rc8-next-20220728 #4
 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : dev_pm_opp_set_config+0x49c/0x610
 lr : dev_pm_opp_set_config+0x58/0x610
 sp : ffff8000093c3710
 x29: ffff8000093c3710 x28: ffffbca3959d82b8 x27: ffff8000093c3d00
 x26: ffffbca3959d8e08 x25: ffff4396cac98118 x24: ffff4396c0e24810
 x23: ffff4396c4272c40 x22: ffff4396c0e24810 x21: ffff8000093c3810
 x20: ffff4396cac36800 x19: ffff4396cac96800 x18: 0000000000000000
 x17: 0000000000000003 x16: ffffbca3f4edf198 x15: 0000001cba64a858
 x14: 0000000000000180 x13: 000000000000017e x12: 0000000000000000
 x11: 0000000000000002 x10: 0000000000000a60 x9 : ffff8000093c35c0
 x8 : ffff4396c4273700 x7 : ffff43983efca6c0 x6 : ffff43983efca640
 x5 : 00000000410fd0d0 x4 : ffff4396c4272c40 x3 : ffffbca3f5d1e008
 x2 : 0000000000000000 x1 : ffff4396c2421600 x0 : ffff4396cac96860
 Call trace:
  dev_pm_opp_set_config+0x49c/0x610
  devm_pm_opp_set_config+0x18/0x70
  vcodec_domains_get+0xb8/0x1638 [venus_core]
  core_get_v4+0x1d8/0x218 [venus_core]
  venus_probe+0xf4/0x468 [venus_core]
  platform_probe+0x68/0xd8
  really_probe+0xbc/0x2a8
  __driver_probe_device+0x78/0xe0
  driver_probe_device+0x3c/0xf0
  __driver_attach+0x70/0x120
  bus_for_each_dev+0x70/0xc0
  driver_attach+0x24/0x30
  bus_add_driver+0x150/0x200
  driver_register+0x64/0x120
  __platform_driver_register+0x28/0x38
  qcom_venus_driver_init+0x24/0x1000 [venus_core]
  do_one_initcall+0x54/0x1c8
  do_init_module+0x44/0x1d0
  load_module+0x16c8/0x1aa0
  __do_sys_finit_module+0xbc/0x110
  __arm64_sys_finit_module+0x20/0x30
  invoke_syscall+0x44/0x108
  el0_svc_common.constprop.0+0xcc/0xf0
  do_el0_svc+0x2c/0xb8
  el0_svc+0x2c/0x88
  el0t_64_sync_handler+0xb8/0xc0
  el0t_64_sync+0x18c/0x190
  qcom-venus: probe of aa00000.video-codec failed with error -16

The fix is re-ordering the code related to OPP core. The OPP core
expects all configuration options to be provided before the OPP
table is added.

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: Init jump labels before parse_early_param()

[ Upstream commit ca829e05d3d4f728810cc5e4b468d9ebc7745eb3 ]

On 64-bit, calling jump_label_init() in setup_feature_keys() is too
late because static keys may be used in subroutines of
parse_early_param() which is again subroutine of early_init_devtree().

For example booting with "threadirqs":

  static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init()
  WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120
  ...
  NIP static_key_enable_cpuslocked+0xfc/0x120
  LR  static_key_enable_cpuslocked+0xf8/0x120
  Call Trace:
    static_key_enable_cpuslocked+0xf8/0x120 (unreliable)
    static_key_enable+0x30/0x50
    setup_forced_irqthreads+0x28/0x40
    do_early_param+0xa0/0x108
    parse_args+0x290/0x4e0
    parse_early_options+0x48/0x5c
    parse_early_param+0x58/0x84
    early_init_devtree+0xd4/0x518
    early_setup+0xb4/0x214

So call jump_label_init() just before parse_early_param() in
early_init_devtree().

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Add call trace to change log and minor wording edits.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb3: check xattr value length earlier

[ Upstream commit 5fa2cffba0b82336a2244d941322eb1627ff787b ]

Coverity complains about assigning a pointer based on
value length before checking that value length goes
beyond the end of the SMB.  Although this is even more
unlikely as value length is a single byte, and the
pointer is not dereferenced until laterm, it is clearer
to check the lengths first.

Addresses-Coverity: 1467704 ("Speculative execution data leak")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to do sanity check on segment type in build_sit_entries()

[ Upstream commit 09beadf289d6e300553e60d6e76f13c0427ecab3 ]

As Wenqing Liu <wenqingliu0120@gmail.com> reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=216285

RIP: 0010:memcpy_erms+0x6/0x10
 f2fs_update_meta_page+0x84/0x570 [f2fs]
 change_curseg.constprop.0+0x159/0xbd0 [f2fs]
 f2fs_do_replace_block+0x5c7/0x18a0 [f2fs]
 f2fs_replace_block+0xeb/0x180 [f2fs]
 recover_data+0x1abd/0x6f50 [f2fs]
 f2fs_recover_fsync_data+0x12ce/0x3250 [f2fs]
 f2fs_fill_super+0x4459/0x6190 [f2fs]
 mount_bdev+0x2cf/0x3b0
 legacy_get_tree+0xed/0x1d0
 vfs_get_tree+0x81/0x2b0
 path_mount+0x47e/0x19d0
 do_mount+0xce/0xf0
 __x64_sys_mount+0x12c/0x1a0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is segment type is invalid, so in f2fs_do_replace_block(),
f2fs accesses f2fs_sm_info::curseg_array with out-of-range segment type,
result in accessing invalid curseg->sum_blk during memcpy in
f2fs_update_meta_page(). Fix this by adding sanity check on segment type
in build_sit_entries().

Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()

[ Upstream commit 141170b759e03958f296033bb7001be62d1d363b ]

As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:

RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
 write_all_xattrs fs/f2fs/xattr.c:487 [inline]
 __f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
 f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
 f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
 __vfs_setxattr+0x115/0x180 fs/xattr.c:182
 __vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
 __vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
 vfs_setxattr+0x13f/0x330 fs/xattr.c:303
 setxattr+0x146/0x160 fs/xattr.c:611
 path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
 __do_sys_lsetxattr fs/xattr.c:653 [inline]
 __se_sys_lsetxattr fs/xattr.c:649 [inline]
 __x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it.

Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: control: Use deferred fasync helper

[ Upstream commit 4a971e84a7ae10a38d875cd2d4e487c8d1682ca3 ]

For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from the control API.  Note
that it's merely a workaround.

Another note: although we haven't received reports about the deadlock
with the control API, the deadlock is still potentially possible, and
it's better to align the behavior with other core APIs (PCM and
timer); so let's move altogether.

Link: https://lore.kernel.org/r/20220728125945.29533-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: timer: Use deferred fasync helper

[ Upstream commit 95cc637c1afd83fb7dd3d7c8a53710488f4caf9c ]

For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from PCI API.  Note that
it's merely a workaround.

Reported-by: syzbot+1ee0910eca9c94f71f25@syzkaller.appspotmail.com
Reported-by: syzbot+49b10793b867871ee26f@syzkaller.appspotmail.com
Reported-by: syzbot+8285e973a41b5aa68902@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220728125945.29533-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: core: Add async signal helpers

[ Upstream commit ef34a0ae7a2654bc9e58675e36898217fb2799d8 ]

Currently the call of kill_fasync() from an interrupt handler might
lead to potential spin deadlocks, as spotted by syzkaller.
Unfortunately, it's not so trivial to fix this lock chain as it's
involved with the tasklist_lock that is touched in allover places.

As a temporary workaround, this patch provides the way to defer the
async signal notification in a work.  The new helper functions,
snd_fasync_helper() and snd_kill_faync() are replacements for
fasync_helper() and kill_fasync(), respectively.  In addition,
snd_fasync_free() needs to be called at the destructor of the relevant
file object.

Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: warn if trusted xattr creation fails

[ Upstream commit b10b85fe5149ee8b39fbbf86095b303632dde2cd ]

When mounting overlayfs in an unprivileged user namespace, trusted xattr
creation will fail.  This will lead to failures in some file operations,
e.g. in the following situation:

  mkdir lower upper work merged
  mkdir lower/directory
  mount -toverlay -olowerdir=lower,upperdir=upper,workdir=work none merged
  rmdir merged/directory
  mkdir merged/directory

The last mkdir will fail:

  mkdir: cannot create directory 'merged/directory': Input/output error

The cause for these failures is currently extremely non-obvious and hard to
debug.  Hence, warn the user and suggest using the userxattr mount option,
if it is not already supplied and xattr creation fails during the
self-check.

Reported-by: Alois Wohlschlager <alois1@gmx-topmail.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/32: Don't always pass -mcpu=powerpc to the compiler

[ Upstream commit 446cda1b21d9a6b3697fe399c6a3a00ff4a285f5 ]

Since commit 4bf4f42a2feb ("powerpc/kbuild: Set default generic
machine type for 32-bit compile"), when building a 32 bits kernel
with a bi-arch version of GCC, or when building a book3s/32 kernel,
the option -mcpu=powerpc is passed to GCC at all time, relying on it
being eventually overriden by a subsequent -mcpu=xxxx.

But when building the same kernel with a 32 bits only version of GCC,
that is not done, relying on gcc being built with the expected default
CPU.

This logic has two problems. First, it is a bit fragile to rely on
whether the GCC version is bi-arch or not, because today we can have
bi-arch versions of GCC configured with a 32 bits default. Second,
there are some versions of GCC which don't support -mcpu=powerpc,
for instance for e500 SPE-only versions.

So, stop relying on this approximative logic and allow the user to
decide whether he/she wants to use the toolchain's default CPU or if
he/she wants to set one, and allow only possible CPUs based on the
selected target.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/32: Set an IBAT covering up to _einittext during init

[ Upstream commit 2a0fb3c155c97c75176e557d61f8e66c1bd9b735 ]

Always set an IBAT covering up to _einittext during init because when
CONFIG_MODULES is not selected there is no reason to have an exception
handler for kernel instruction TLB misses.

It implies DBAT and IBAT are now totaly independent, IBATs are set
by setibat() and DBAT by setbat().

This allows to revert commit 9bb162fa26ed ("powerpc/603: Fix
boot failure with DEBUG_PAGEALLOC and KFENCE")

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce7f04a39593934d9b1ee68c69144ccd3d4da4a1.1655202804.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: export lockup_detector_reconfigure

[ Upstream commit 7c56a8733d0a2a4be2438a7512566e5ce552fccf ]

In some circumstances it may be interesting to reconfigure the watchdog
from inside the kernel.

On PowerPC, this may helpful before and after a LPAR migration (LPM) is
initiated, because it implies some latencies, watchdog, and especially NMI
watchdog is expected to be triggered during this operation. Reconfiguring
the watchdog with a factor, would prevent it to happen too frequently
during LPM.

Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and
create a new function lockup_detector_reconfigure() calling
__lockup_detector_reconfigure() under the protection of watchdog_mutex.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Squash in build fix from Laurent, reported by Sachin]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-3-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Add fast call path of crash_kexec()

[ Upstream commit 3f1901110a89b0e2e13adb2ac8d1a7102879ea98 ]

Currently, almost all archs (x86, arm64, mips...) support fast call
of crash_kexec() when "regs && kexec_should_crash()" is true. But
RISC-V not, it can only enter crash system via panic(). However panic()
doesn't pass the regs of the real accident scene to crash_kexec(),
it caused we can't get accurate backtrace via gdb,
$ riscv64-linux-gnu-gdb vmlinux vmcore
Reading symbols from vmlinux...
[New LWP 95]
#0  console_unlock () at kernel/printk/printk.c:2557
2557                    if (do_cond_resched)
(gdb) bt
#0  console_unlock () at kernel/printk/printk.c:2557
#1  0x0000000000000000 in ?? ()

With the patch we can get the accurate backtrace,
$ riscv64-linux-gnu-gdb vmlinux vmcore
Reading symbols from vmlinux...
[New LWP 95]
#0  0xffffffe00063a4e0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81
81             *(int *)p = 0xdead;
(gdb)
(gdb) bt
#0  0xffffffe00064d5c0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81
#1  0x0000000000000000 in ?? ()

Test code to produce NULL address dereference in test_crash.c,
void *p = NULL;
*(int *)p = 0xdead;

Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220606082308.2883458-1-xianting.tian@linux.alibaba.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: mmap with PROT_WRITE but no PROT_READ is invalid

[ Upstream commit 2139619bcad7ac44cc8f6f749089120594056613 ]

As mentioned in Table 4.5 in RISC-V spec Volume 2 Section 4.3, write
but not read is "Reserved for future use.". For now, they are not valid.
In the current code, -wx is marked as invalid, but -w- is not marked
as invalid.
This patch refines that judgment.

Reported-by: xctan <xc-tan@outlook.com>
Co-developed-by: dram <dramforever@live.com>
Signed-off-by: dram <dramforever@live.com>
Co-developed-by: Ruizhe Pan <c141028@gmail.com>
Signed-off-by: Ruizhe Pan <c141028@gmail.com>
Signed-off-by: Celeste Liu <coelacanthus@outlook.com>
Link: https://lore.kernel.org/r/PH7PR14MB559464DBDD310E755F5B21E8CEDC9@PH7PR14MB5594.namprd14.prod.outlook.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: canaan: Add k210 topology information

[ Upstream commit d9d193dea8666bbf69fc21c5bdcdabaa34a466e3 ]

The k210 has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220705190435.1790466-6-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: sifive: Add fu740 topology information

[ Upstream commit bf6cd1c01c959a31002dfa6784c0d8caffed4cf1 ]

The fu740 has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220705190435.1790466-4-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rsnd: care default case on rsnd_ssiu_busif_err_irq_ctrl()

[ Upstream commit ef30911d3c39fd57884c348c29b9cbff88def155 ]

Before, ssiu.c didn't care SSI5-8, thus,
commit b1384d4c95088d0 ("ASoC: rsnd: care default case on
rsnd_ssiu_busif_err_status_clear()") cares it for status clear.

But we should care it for error irq handling, too.
This patch cares it.

Reported-by: Nguyen Bao Nguyen <nguyen.nguyen.yj@renesas.com>
Reported-by: Nishiyama Kunihiko <kunihiko.nishiyama.dn@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871quocio1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modules: Ensure natural alignment for .altinstructions and __bug_table sections

[ Upstream commit 87c482bdfa79f378297d92af49cdf265be199df5 ]

In the kernel image vmlinux.lds.S linker scripts the .altinstructions
and __bug_table sections are 4- or 8-byte aligned because they hold 32-
and/or 64-bit values.

Most architectures use altinstructions and BUG() or WARN() in modules as
well, but in the module linker script (module.lds.S) those sections are
currently missing. As consequence the linker will store their content
byte-aligned by default, which then can lead to unnecessary unaligned
memory accesses by the CPU when those tables are processed at runtime.

Usually unaligned memory accesses are unnoticed, because either the
hardware (as on x86 CPUs) or in-kernel exception handlers (e.g. on
parisc or sparc) emulate and fix them up at runtime. Nevertheless, such
unaligned accesses introduce a performance penalty and can even crash
the kernel if there is a bug in the unalignment exception handlers
(which happened once to me on the parisc architecture and which is why I
noticed that issue at all).

This patch fixes a non-critical issue and might be backported at any time.
It's trivial and shouldn't introduce any regression because it simply
tells the linker to use a different (8-byte alignment) for those
sections by default.

Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/all/Yr8%2Fgr8e8I7tVX4d@p100/
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/io-pgtable-arm-v7s: Add a quirk to allow pgtable PA up to 35bit

[ Upstream commit bfdd231374181254742c5e2faef0bef2d30c0ee4 ]

Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA and
cause pgtable PA size larger than 32bit.

Since Mediatek IOMMU hardware support at most 35bit PA in pgtable,
so add a quirk to allow the PA of pgtables support up to bit35.

Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220630092927.24925-2-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start

[ Upstream commit 7a9f743ceead60ed454c46fbc3085ee9a79cbebb ]

We should call of_node_put() for the reference 'uctl_node' returned by
of_get_parent() which will increase the refcount. Otherwise, there will
be a refcount leak bug.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio: Clear the caps->buf to NULL after free

[ Upstream commit 6641085e8d7b3f061911517f79a2a15a0a21b97b ]

On buffer resize failure, vfio_info_cap_add() will free the buffer,
report zero for the size, and return -ENOMEM.  As additional
hardening, also clear the buffer pointer to prevent any chance of a
double free.

Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220629022948.55608-1-schspa@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>