Thiago Macieira [Mon, 26 Mar 2012 13:37:06 +0000 (10:37 -0300)]
Disable ICC diagnostic 2261 about __assume with side-effects
The warning is presented now that we use __assume in every
Q_ASSERT. It presents itself in code that calls functions, like:
tools/qbitarray.h(128): warning #2261: __assume expression with side effects discarded
{ Q_ASSERT(i >= 0 && i < size());
^
Change-Id: I5851b3c35b56c00b9c541c2489233121ef621e04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Girish Ramakrishnan [Tue, 20 Mar 2012 21:02:21 +0000 (14:02 -0700)]
device: Add -device and -device-option to configure
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Rohan McGovern [Mon, 26 Mar 2012 23:34:48 +0000 (09:34 +1000)]
Mark tst_qdialog as insignificant on mac.
This autotest gives different results on consecutive runs, and is
therefore insignificant for the purpose of detecting regressions.
Task-number: QTBUG-24977
Change-Id: I5c4dfd663ce5df6b60ae47a29d332c06e3c0585f
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Marius Storm-Olsen [Wed, 21 Mar 2012 10:09:59 +0000 (11:09 +0100)]
Sync configure with Unix version (-make/-nomake)
Move previous -make <exe> feature to -make-tool <exe>
Change-Id: I1cbc87e60e2588fd8b2a11c11178988003cac7c1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Bradley T. Hughes [Mon, 26 Mar 2012 09:58:01 +0000 (11:58 +0200)]
Cocoa: initialize QCocoaEventDispacherPrivate::lastSerial
This silences warnings from valgrind about a conditional depending on an
uninitialized value.
Change-Id: I819a44ed5dc02e163c00849811870c94f66b6651
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Thiago Macieira [Fri, 23 Mar 2012 22:16:23 +0000 (19:16 -0300)]
Remove old code that was for the MIPSpro compiler
That compiler is no longer supported
Change-Id: I6ff9003a8b986478850ad2e6e6662a44264236d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Thiago Macieira [Thu, 1 Mar 2012 16:44:34 +0000 (17:44 +0100)]
Fix annoying deprecation warning about QImageTextKeyLang
If we deprecate the entire class, then we get the warning for every use
of it with GCC, including the three operators defined inside the class.
So instead, mark as only the constructors as deprecated, which should
reduce the warnings to the places where the class was instantiated.
That should be enough to poison the code enough: to fix the warning, you
need to stop using the class there and/or stop calling one of the
deprecated functions that deal with it.
Unfortunately, we still get one more warning inside the inline code, in
QImage::textList. To remove that warning, we disable all deprecation
warnings around that code block.
Change-Id: If3c11647a9d2cab055e15810d7cfe0d8f5e7042f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Bai Jing [Mon, 26 Mar 2012 09:32:52 +0000 (11:32 +0200)]
let qtPrepareTool give right path for app_bundle
Change-Id: Ieb4979244d741c9d9d0c11a035c18ced87ea28f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Rafael Roquetto [Mon, 19 Mar 2012 16:30:28 +0000 (17:30 +0100)]
Blackberry mkspecs
Unlike QNX mkspecs, these mkspecs target more specific, BlackBerry-only
devices. So far, the only difference is the definition of Q_OS_BLACKBERRY
and linking with -lbps, but this will likely change with time. It will also
allow conditional compilation to distinguish between qnx and blackberry
devices.
Change-Id: Ia44e9b4059f720c308240e9dac7e90f7ae7920d0
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Bradley T. Hughes [Wed, 21 Mar 2012 09:30:53 +0000 (10:30 +0100)]
Cocoa: Remove unused qt_mac_is_sheet() function
The static qt_mac_is_sheet() function in qcocoafiledialoghelper.mm was
not called anywhere, remove it.
Change-Id: I88785e15aa17ae9c9ffbc33eba30433c8834b798
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Bradley T. Hughes [Wed, 21 Mar 2012 09:29:24 +0000 (10:29 +0100)]
Cocoa: silence warnings about unused variables
Silence warnings about unused function parameters and local variables
while building the Cocoa platform plugin.
Change-Id: I6aedc4cb21c5fb48d2d6e501561473d3f7112aed
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Bradley T. Hughes [Tue, 20 Mar 2012 12:30:10 +0000 (13:30 +0100)]
Cocoa: silence warnings from QCocoaBackingStore
Remove unused (and misspelled) flipedRect() function, as well as several
unused variables.
Change-Id: I48a5bf2eaad67686f60523a5c22262cad5314128
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Bradley T. Hughes [Fri, 23 Mar 2012 11:53:35 +0000 (12:53 +0100)]
Cocoa: QCocoaWindow::clearNSWindow() needs to cleanup properly
clearNSWindow() should also clear the delegate and remove the
contentView from the window, since we are no longer using that window.
Make sure the QCocoaWindow::~QCocoaWindow() doesn't release the
m_contentView until after clearNSWindow(), to avoid crashes while
trying to cleanup the window and view.
Change-Id: Ia081488f629a4fd4cf10fb1053fb8183b1914d35
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Donald Carr [Fri, 23 Mar 2012 21:29:34 +0000 (21:29 +0000)]
Reunite NAS support in configure with QSound
RIP
Change-Id: I7c47052ce4962f10dbcbbb8d48f05b3158d4a69a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Bradley T. Hughes [Wed, 21 Mar 2012 08:43:45 +0000 (09:43 +0100)]
Cocoa: don't show window when calling raise()
Calling raise() on a hidden window should not show it. The setVisible()
function will ensure that the window is raised (since we use orderFront
or makeKeyAndOrderFront). This fixes the failing
tst_QDockWidget::task169808_setFloating() test as well.
Task-number: QTBUG-24774
Change-Id: If34472ebbcd615c10654efafd54c84c03d10bc8c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Lars Knoll [Thu, 22 Mar 2012 09:53:45 +0000 (10:53 +0100)]
Fix measurement system for the UK
THe UK still uses the Imperial system at least for distances
and many other things.
Change-Id: I99379de35620114328ad6a7fc9b226a46692bedd
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Pekka Vuorela [Fri, 16 Mar 2012 12:08:13 +0000 (14:08 +0200)]
Password editor mask delay stylable by platform plugin
Replaced hard coding as QT_GUI_PASSWORD_ECHO_DELAY with
a style hint.
Change-Id: I0b78ebad723dbe19d9b9496583203e31545874e2
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Laszlo Agocs [Sat, 24 Mar 2012 08:48:12 +0000 (10:48 +0200)]
Test mouse events more thoroughly in QWindow autotest
Apparently there are still issues here and there (e.g. in declarative)
with properly recognizing more complex event sequences (like triple
clicks). The behavior of qtbase is correct but we need a test case
that makes sure the functionality will not regress.
Change-Id: I08c558fcfdde0dd06e194b4f0affc6f6896573bf
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Bradley T. Hughes [Wed, 21 Mar 2012 09:49:39 +0000 (10:49 +0100)]
Cocoa: reimplement QPlatformWindow::setOpacity()
Qt and Cocoa opacity levels are compatible, so we just need to forward
the setOpacity() argument to [NSWindow setAlphaValue]
Change-Id: I5fd5678894fd6949811ad1c4b493e592561f01f6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Jiang Jiang [Thu, 22 Mar 2012 12:14:24 +0000 (13:14 +0100)]
Fix for fontconfig 2.9 behavior change
Start from 2.9, fontconfig will reset the result to FcResultNoMatch at
the beginning of FcFontSort().
According to
http://lists.freedesktop.org/archives/fontconfig/2012-March/003857.html
the result value of FcFontSort() can be ignored, checking the nfont
value of the fontset returned is sufficient.
The fix works for pre-2.9 versions as well, since those versions don't
touch the result at all.
Change-Id: Iba6c1157e314088a90867292a4bd970bb873e284
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Eskil Abrahamsen Blomfeldt [Fri, 23 Mar 2012 13:45:51 +0000 (14:45 +0100)]
Remove dummy impl. of shared graphics cache in XCB plugin
This implementation was disabled and didn't really work
properly, so it doesn't make sense to update or do
bug fixes to it. Removing it completely instead.
Change-Id: I62abe35f0f9a91bb207b87296d25c3c62d58228e
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Bradley T. Hughes [Tue, 20 Mar 2012 12:27:07 +0000 (13:27 +0100)]
Cocoa: reimplement QPlatformBackingStore::scroll()
Use qt_scrollImageInRect() from QtGui to accelerate scrolling in the
Cocoa plugin.
Change-Id: I8ad1377ed3307345f72d17c72049cec5472c97d3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Bradley T. Hughes [Thu, 22 Mar 2012 16:43:25 +0000 (17:43 +0100)]
Fix QGuiApplication::keyboardModifiers()
Make sure that the keybaord modifiers are maintained properly when
handling window system events.
Change-Id: Ie75cbe5eb509c29e3d2291694f2de509fbf3098a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Bradley T. Hughes [Thu, 22 Mar 2012 16:39:30 +0000 (17:39 +0100)]
Cocoa: send key events for modifier keys
Implement -flagsChanged: in QNSView so that we can calculate the
necessary modifier key events to send.
Change-Id: I3de89537d6e22b4a6d69ae646a71d9722dd9f82a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Bradley T. Hughes [Wed, 21 Mar 2012 09:38:32 +0000 (10:38 +0100)]
Cocoa: keep a NSWindow pointer in QCocoaWindow
The NSWindow we create could either be a QNSWindow (our NSWindow
subclass) or a QNSPanel (our NSPanel subclass).
Change-Id: I6e5c18328bf0fd1786a042d1fddc5b3e8be17f89
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Sarah Smith [Wed, 21 Mar 2012 06:45:32 +0000 (16:45 +1000)]
Fix qtnamespace compile break on Mac.
Appears as though the QT_NAMESPACE macros are incorrect here.
In fact in qisenum.h because the #define is no respecter of a namespace
in most of these conditional compile cases they will be ignored
effectively. The QT_HEADER also - if qtypetraits.h conditional compile
occurs then it will result in adding extern "C" { twice. For the macros
invoking them will not cause the extern "C" { to be used anyway, so just
remove this altogether.
Task-number: QTBUG-24903
Change-Id: I710dc330f58357f395241a0cf3172e41a5864576
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Glenn Watson <glenn.watson@nokia.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Kurt Korbatits [Thu, 22 Mar 2012 03:12:21 +0000 (13:12 +1000)]
Fixed qthreadstorage unittest to work from install directory
- Added install of crashonexit sub program
Change-Id: I2cc3043d5c1b879665930552487b4fe54407fd25
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Thiago Macieira [Thu, 29 Dec 2011 21:53:30 +0000 (19:53 -0200)]
Remove the Q_STATIC_TEMPLATE_SPECIALIZATION macro
This was necessary only for older MS Visual Studio versions, which are
no longer supported anyway.
Change-Id: I6c96fb2340296c34b480716303c93b892419229b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Thiago Macieira [Fri, 11 Nov 2011 19:55:46 +0000 (17:55 -0200)]
Remove the use of a template qUnused function for ICC
ICC 12 does not seem to need this.
Change-Id: I98e9d530e767c4d24424f0c2b5d763f863e85fe4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Thiago Macieira [Wed, 19 Oct 2011 21:41:17 +0000 (23:41 +0200)]
Work around what apparently is a GCC 4.6.0 bug
The QFlags::operator int() isn't being called, so GCC complains that
this isn't an integer expression.
Change-Id: I537d06fd4a52ecbcddf0ef67807b298c42d3e911
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Frederik Gladhorn [Wed, 14 Mar 2012 13:01:54 +0000 (14:01 +0100)]
Improve accessibility test to handle more text events.
Change-Id: I67ece6c9bb755e84c786b32e8e3396eaf634fda1
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Thiago Macieira [Tue, 28 Feb 2012 13:55:22 +0000 (14:55 +0100)]
Use private futexes for QMutex on Linux if they're available
Futexes on Linux can be used across processes, for inter-process
synchronisation. The private flag tells the kernel that this futex is
not used with other processes, so it does not need to check for waiters
outside the current process.
This feature had been proposed in Merge Request 25, but was lost.
Change-Id: Ieafa8b8df0949bd9ae73709b3ec63f7709b0b2a6
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Samuel Rødal [Fri, 23 Mar 2012 07:00:11 +0000 (08:00 +0100)]
Use XCB_TIME_CURRENT_TIME instead of CurrentTime from X.h in xcb plugin.
The less X header dependencies the better, we might at some time in the
future be able to do without the XCB_USE_XLIB define as well.
Change-Id: Ib45986036febef70798851ee8455e054eafc9d22
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arne Petersen <jpetersen@openismus.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
David Faure [Sat, 24 Mar 2012 08:23:25 +0000 (09:23 +0100)]
Restore Qt4 compat in QDesktopServices::DataLocation
"/data/" was appended to the base directory.
Change-Id: I220f2ce74c36b795bc49c7c84106feb0709d1547
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Thiago Macieira [Sat, 31 Dec 2011 02:15:06 +0000 (00:15 -0200)]
Add macros for assuming and unreachable code
Use these macros to tell the compiler about conditions that may
happen, so it will generate better code. But do not assume that they
will do anything special.
Change-Id: I89ec4f65f48a9340ccf5ffc4ae4b8c3d8897c8b1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Thiago Macieira [Sat, 31 Dec 2011 02:14:50 +0000 (00:14 -0200)]
Update the C++11 support macros
Move them all to a central place and document each macro, so we
don't give typo names by accident
Change-Id: Ia863ac3f7ca82e4d2f8388b3e691a12c7e482283
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Thiago Macieira [Wed, 28 Dec 2011 19:00:27 +0000 (17:00 -0200)]
QPrinterInfo: remove a test that is too early
If we want to have any chance of getting the missing printers
reported, we cannot check the size beforehand.
Change-Id: I450897fe53c04aeb1a4b217bd0c1f548c455a428
Reviewed-by: John Layt <jlayt@kde.org>
Thiago Macieira [Wed, 16 Nov 2011 16:47:11 +0000 (14:47 -0200)]
Use QVector<int> instead of QList<int> for storing metatypes in QtDBus
Change I00020eed fixed a bug present in 64-bit machines because it
tried to access QList<int>'s internal array data, assuming it was a
vector of ints. That worked in 32-bit, but not 64-bit.
The fix involves a conversion between QList and QVector. Now fix it
properly by changing everything to be QVector. The benefit is that on
64-bit, they are real vectors, not the 50%-overhead pointer array that
QList is.
Change-Id: I989ad279d0d8b2c9ab262a1eed413ab2365b5461
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Thiago Macieira [Wed, 19 Oct 2011 21:42:11 +0000 (23:42 +0200)]
Fix compilation of tst_QSqlThread: no need to use QBasicAtomicInt here
Change-Id: Ib474fe62501ee1ee5e3d7008c3b561f8db79265c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Frederik Gladhorn [Tue, 13 Mar 2012 19:25:12 +0000 (20:25 +0100)]
Make sure windows send accessibility activated updates.
Both QWindow and QWidgetWindow should update with the
active state signal.
Change-Id: I0219f803aa0fb109765f0faa0aedb120c2a439f0
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Frederik Gladhorn [Mon, 13 Feb 2012 13:05:51 +0000 (14:05 +0100)]
Added QAccessibleGroupBox
Added a new accessible interface for QGroupBox, as QAccessibleDisplay
is not good enough when the QGroupBox is checkable.
AccessibleFactory was modified to return a QAccessibleGroupBox when
the accessible interface of a QGroupBox is requested.
Created tst_QAccessibility::groupBoxTest
Port to Qt5 of the patch by José Millán Soto <fid@gpul.org>
Change-Id: I6c23dcf5562b3ea269b04102e78463b65827188a
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
(cherry picked from commit
c03ceb203c65d9e3485fad848bfc0c4b6ee3e9aa)
Thiago Macieira [Fri, 30 Dec 2011 16:54:43 +0000 (14:54 -0200)]
Silence a warning about a change of sign.
GLuint is, like the name says, unsigned. To store -1 in it, a change
of sign happens. Silence the warning by casting the -1 to GLuint
first.
Change-Id: I165a32c486358a60f7c5fd0c439204ed2f9f7f16
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Tue, 28 Feb 2012 13:56:22 +0000 (14:56 +0100)]
Update the header list for the QtDBus module
qdbusintrospection_p.h was missing from the header list. And this module
has the public headers in a separate variable.
Change-Id: I9fd85a2930af71d081b7cabd04eb29d94c285382
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Thiago Macieira [Mon, 27 Feb 2012 14:02:00 +0000 (15:02 +0100)]
Remove support for Mac OS X compilers without the -Xarch flag
This was necessary in order to support Universal builds when this flag
wasn't present. This flag can be considered present in all builds
now. What's more, Apple doesn't support PowerPC builds anymore anyway,
so we won't either.
Change-Id: I79c45a450ddf7d58cd4b7da03d6bbf7d3feb0d9a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Thiago Macieira [Tue, 24 Jan 2012 15:49:26 +0000 (13:49 -0200)]
Add the missing 'itt eq' instructions to the ARM atomics.
This affected the 16- and 64-bit sizes only. Must have been a C&P failure.
Change-Id: If7b1e534a61d812226a6e4970909b53b0cc5a9a6
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Thiago Macieira [Fri, 11 Nov 2011 02:18:40 +0000 (00:18 -0200)]
Silence warnings about GCC #pragma in ICC
Change-Id: I7659ce312f3777ae68190979681656d12306d33c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Thiago Macieira [Fri, 30 Dec 2011 16:54:11 +0000 (14:54 -0200)]
Fix warnings about commas at the end of enums
It's non-standard to accept them, so remove them and silence the
warnings.
Change-Id: I51c5afe99eac408f326ab9fcf40435b60e953b54
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Thiago Macieira [Tue, 27 Dec 2011 14:30:20 +0000 (12:30 -0200)]
Fix building the XCB platform plugin
The dlxxx functions are in libdl and the xcb_shm functions are in
libxcb-shm.
Change-Id: I412e1df4dc2939b7dac4f6b244c46e23c79da630
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Thu, 1 Mar 2012 16:18:17 +0000 (17:18 +0100)]
Fix deprecation warning about QPlatformWindow::visible
The proper getter name of a boolean property is prefixed with is-.
Change-Id: Id1fae9ccd11db3e92903c51012bbe75d52726a5a
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Friedemann Kleint [Thu, 22 Mar 2012 14:01:50 +0000 (15:01 +0100)]
Fix loading of the ICU dynamic libraries on Windows.
- Account for differing library name on Windows.
- Improve error messages.
Acked-by: John Layt <jlayt@kde.org>
Change-Id: Ib567f8c79ab4b5655cdb2fe050f91013e9305263
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Jan-Arve Saether [Fri, 23 Mar 2012 10:11:53 +0000 (11:11 +0100)]
Enable IAccessible for MinGW32, keep IAccessible2 disabled for MinGW
No surprise, the files generated by midl contains code that only
the MS compiler will understand.
However, since the generated files are only needed for IA2, we
can still compile the old IAccessible/MSAA implementation for mingw
(like it was before the introduction of IA2)
I used mingw 4.6.1 to test this.
Change-Id: Iad581f2fee087bd7b796ac5a01548f2fcacbd595
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Jan-Arve Saether [Thu, 8 Mar 2012 09:18:58 +0000 (10:18 +0100)]
API cleanup: remove CoordinateType enum
The bridge can do the mapping to and from screen position.
This is now done in the windows bridge.
Change-Id: I5ca5df0fbeeb58202539f55a0f62717fb1685092
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Marc Mutz [Thu, 22 Mar 2012 16:31:57 +0000 (17:31 +0100)]
xcb: fix (negative) coordinate handling
For some reason, XCB accepts positions as unsigned
integers, even though the X protocol explicitly
allows negative values (windows overlapping the
left/top screen border).
After discussion with Samuel and Laszlo, use a
reinterpret_cast to convert from the signed
representation to the unsigned one.
I also extended the clipping of the extents to
the position. I guess if X can't handle widths
beyond XCOORD_MAX, it won't be happy with
x-coordinates exceeding that limit, either.
Change-Id: I2fa0e61f823b6cd45dad6471eaa55f38bb3c3e52
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Friedemann Kleint [Fri, 23 Mar 2012 13:39:08 +0000 (14:39 +0100)]
Compile fix for MinGW.
Change-Id: Id8099668dd1a4b137b6f9451be8617d07bc9d0c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Friedemann Kleint [Fri, 23 Mar 2012 10:34:17 +0000 (11:34 +0100)]
Fix warnings in qtbase.
Change-Id: I981e08872440e35eb9bfad32b20543cfce8439c9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Bradley T. Hughes [Fri, 23 Mar 2012 12:30:40 +0000 (13:30 +0100)]
configure: Fix x86_64 arch detection (part 2)
This is a follow-up to comit
70a88331519e6e6439ff23a9cc91b2e3f607acb6.
The regular expression for CFG_HOST_ARCH was not updated in the above
commit.
Change-Id: I2baf0b42d851f1df096c2f6ad54aeec57940e661
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Samuel Rødal [Fri, 23 Mar 2012 07:51:15 +0000 (08:51 +0100)]
Make QEglFSBackingStore use QtGui-only APIs.
We now have better replacements for QGLPaintDevice etc.
Change-Id: I3ac563f0ac26a563b3c788d16c77e0237d9d96d9
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Rafael Roquetto [Mon, 19 Mar 2012 16:13:13 +0000 (17:13 +0100)]
Initial implementation of QQnxServices
Extends platform services for QNX devices.
Change-Id: I1eb685cdb38591cd73eaaf40ffb5691db0142953
Reviewed-by: Jeff Kehres <jkehres@rim.com>
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Friedemann Kleint [Fri, 9 Mar 2012 10:38:55 +0000 (11:38 +0100)]
Implement QSystemTrayIcon for X11.
Reimplement using a QWidget. Use X
Change-Id: I7f8326598fb7210d59bc1d682cdada4526d5b6dd
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Giuseppe D'Angelo [Fri, 23 Mar 2012 05:24:09 +0000 (05:24 +0000)]
Remove #if 0 sections from QRegExp autotest
Use QEXPECT_FAIL instead (QRegExp is bugged w.r.t. the specific
test data).
Task-number: QTBUG-22466
Change-Id: Id5af01fa0d5c0536845fd4db19d4264498a8675b
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Shane Kearns [Thu, 22 Mar 2012 15:10:26 +0000 (15:10 +0000)]
Fix performance problem with NTLM auth in http POST
A combination of other fixes resulted in authentication credentials
with a blank username & password being incorrectly added to the
cache only for NTLM.
This caused authentication to be attempted with blank credentials
first (which would fail), before the authenticationRequired
signal was emitted.
It caused a performance issue because of the extra 2 requests to the
server (and possibly delays inserted by the server following a failed
login)
Change-Id: Ic588a20cfe7c24d5e60cd384caff0673a587e484
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Stephen Kelly [Thu, 22 Mar 2012 14:51:16 +0000 (15:51 +0100)]
Only create cmake files if MODULE is set.
WinMain does not set MODULE, though it uses qt_module_config and
generates incomplete cmake files in the wrong locations as a result.
Change-Id: I5081a13a19469ab8cd01970a55684b8451bc79d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Martin Petersson [Thu, 22 Mar 2012 09:39:31 +0000 (10:39 +0100)]
QLocalSocket: remove double buffer on qlocalsocket_unix
The QLocalSocket is using a QLocalUnixSocket which is a QTcpSocket
that has buffering enabled. Because QLocalSocket is a QIODevice it
also has its own read buffer. By opening the QIODevice Unbuffered
we only use the buffer in the QLocalUnixSocket.
Change-Id: I4b9091522f73b0831b20efb4a2a00c2603fc748b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Tasuku Suzuki [Mon, 19 Mar 2012 02:04:26 +0000 (11:04 +0900)]
Check if Qt::ImEnabled is true before handling im events on Mac
Key events were not sent to items on graphics view after the change
412dbdf410c765e75c60d1f48143dd6c02a69493. This is because the change
only checks if QGuiApplication::focusObject() exists. Qt::ImEnabled
needs to be checked too.
Change-Id: I2a78af717a7a1a5d84fbc8b521253bdc25b43286
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Morten Johan Sorvig [Wed, 21 Mar 2012 13:58:20 +0000 (14:58 +0100)]
Cocoa: Add window fullscreen button on OS X Lion.
Use the heuristic that windows that are not an
NSPanel and has the MaximizedButtonHint get the
fullscreen button.
Change-Id: I9a3520b7e4cd1833421d5d2f5b73da7edbfc3e74
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Morten Johan Sorvig [Thu, 22 Mar 2012 10:21:32 +0000 (11:21 +0100)]
Add QPA readme.
Change-Id: Ibc3a95f3560af909a45d147098184c2194187932
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Bradley T. Hughes [Fri, 23 Mar 2012 06:02:47 +0000 (07:02 +0100)]
configure: Fix x86_64 detection
The regular expression should look for underscores in addition to
alphanumeric characters.
Change-Id: Idc3dbd67291ec1420f818d74fba8413b1e7cbcf1
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Thiago Macieira [Mon, 5 Mar 2012 17:45:17 +0000 (09:45 -0800)]
Fix udev building after commit
7a169fb52a2d57ec6b3b8e6196e5d4ce084e3eb0
Change-Id: I13fcc6f58376657d54d3c0efd02f5ffba2a79cca
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Pekka Vuorela [Tue, 28 Feb 2012 12:23:36 +0000 (14:23 +0200)]
Deprecate QInputMethodEvent::setTentativeCommitString()
Free form tentative commit proved to require too much fiddling on
rendered text vs. logical content. Needs simpler mechanism.
Change-Id: Ia4e341abf342d25675fd1129efb11094dde410b2
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Thiago Macieira [Thu, 22 Mar 2012 14:55:18 +0000 (11:55 -0300)]
Whitespace fix for brace in qstring.cpp
Change-Id: Ia6cf0d2babd931c9ac2a441a9cfec35f2297dddb
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Thiago Macieira [Mon, 17 Oct 2011 22:32:52 +0000 (00:32 +0200)]
Quick optimisations to QString: no const-ref for QLatin1XXX
Change-Id: I2c96adc6ae451f085024464791e53739b2d38bab
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Robin Burchell [Sat, 17 Mar 2012 22:47:22 +0000 (23:47 +0100)]
Use the same ifdef-based debugging as the other engines.
Just so I have a similar workflow all over the place.
Change-Id: I99df5042eac1b4fbf3613f339e8a4522f94ed1f5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Pekka Vuorela [Wed, 21 Mar 2012 14:23:33 +0000 (16:23 +0200)]
Fixed QLineEdit to emit selectionChanged
Was not emitted when removed by input method event.
Change-Id: Ia2c0dcb09d42826188d4612f4c1705a41874a31d
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Miikka Heikkinen [Wed, 21 Mar 2012 15:17:42 +0000 (17:17 +0200)]
Fix QPrinter test in Windows
Fixed Q_WS_WIN flagging to Q_OS_WIN in QPrinter API and related
implementation to make API match the documentation and Qt 4.8.
Also Removed the unused internal HDC related functions from the API,
that were previously behind Q_WS_WIN flag.
Some of the properties tested are documented to be valid for native
print engine only in X11 environment, so skipped testing those in
non-xcb environments.
Copy collation is also apparently not supported in Windows native print
engine, though this seems to be undocumented, so skipped that only in
Windows.
At least one of the test blocks in tst_QPrinter::valuePreservation()
failed due to default printer not getting set properly, so fixed that,
too.
Task-number: QTBUG-24191
Task-number: QTBUG-22927
Change-Id: I44a5e3d647a1279fcc7f1e99de6881f9be330246
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Donald Carr [Tue, 20 Mar 2012 11:38:59 +0000 (11:38 +0000)]
Deprecate QApplication::setGraphicsSystem
The QApplication::setGraphicsSystem() call is entirely vestigial after the
QPA rearchitecting of Qt. Deprecate it to give people a heads up that their
original intent no longer has any impact on their application.
Change-Id: I21838431db1057f7f7858b4a434ae0eebd2317de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Lars Knoll [Mon, 12 Mar 2012 11:40:03 +0000 (12:40 +0100)]
Make QLocalePrivate::updateSystemLocale() reset the locale data on Unix
Reread the environment, and update the locale data on request.
Also fix a small bug where the time format wasn't inherited from
the LANG environment variable if LC_TIME wasn't set.
Change-Id: I619447603ade19d5587b427491cfd9c8fe814858
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Thiago Macieira [Wed, 31 Aug 2011 08:32:41 +0000 (10:32 +0200)]
Make QLocale not depend on being friends with the global static
Don't assume that the global static is a function. Instead, create a
class that is friends.
Change-Id: I992f4d819b367899b19d95b4983e6b243f0ed932
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Thiago Macieira [Thu, 29 Dec 2011 14:41:44 +0000 (12:41 -0200)]
Remove the workaround for GCC 3.3 on IRIX
GCC 3.3 is no longer supported. IRIX is no longer supported.
Change-Id: I1656a6fdcf2b244f0f6c812e71b0e793d37fb98b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Girish Ramakrishnan [Wed, 21 Mar 2012 04:01:20 +0000 (21:01 -0700)]
Make architecture detection more robust.
Any message/error in mkspecs or qmake feature files ends up confusing
the current arch detection logic. Instead, search for
"Project MESSAGE: .* Architecture: <arch>".
Change-Id: I308932a5b75f3a1fcbc4fe30c74faf2e83b2d752
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Thiago Macieira [Thu, 29 Dec 2011 19:59:01 +0000 (17:59 -0200)]
Fix compilation on ARM with C++11: narrowing conversion
Cannot have double-to-float conversions inside { } in C++11.
Change-Id: I13c27307efd703420b6667d919bb42c2ee82e6cc
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Fri, 6 Jan 2012 16:53:38 +0000 (14:53 -0200)]
Fix the build of qt-freetype with -system-zlib
The static library needs to link to zlib too, so that the plugins
using this library link to zlib.
At runtime this doesn't make a difference because -system-zlib means
QtCore is linked to zlib and the system zlib shared library was
loaded, so the symbols are resolved. However, since -Wl,-no-undefined
was added to the build, the plugin must link to zlib explicitly too.
Change-Id: I10d6df8814e823079fee76ae6a7d5b55057c9daf
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Fri, 6 Jan 2012 16:55:55 +0000 (14:55 -0200)]
Fix the build of -qt-freetype
The symbol must be exported from QtGui for the plugins to be able to
see it.
Also, fix the build in namespaced case: cannot use extern in
QtPlatformSupport because it's not compiled into the Qt namespace.
Change-Id: I029533f3524e3cbf6c87aed79c1f2e7b55aebb9b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Sun, 19 Feb 2012 09:02:11 +0000 (10:02 +0100)]
Fix compilation: std::min is in <algorithm>
Change-Id: I89227bb9fca0f081a232c2ede10c4d455edb2ee9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Tue, 30 Aug 2011 19:42:39 +0000 (21:42 +0200)]
Save the pkg-config settings in config.status
Change-Id: I6fc14eaf071ff56325bbcabb0ae8971fcf07b370
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Thiago Macieira [Thu, 29 Dec 2011 22:11:56 +0000 (20:11 -0200)]
Add a non-implicit virtual destructor for QDashStroker
The base class has a virtual destructor, so the destructor is already
virtual. Make it non-implicit so that the virtual table and other
virtual inline methods don't get emitted everywhere.
Change-Id: I15296c1114086ff0b1da701ccd51525bec99d76b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Fri, 10 Feb 2012 11:20:07 +0000 (12:20 +0100)]
Add qpair.h to the HEADERS list
Change-Id: I81d078a80b2fba201da9440e3550c2b73adaf668
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Tue, 27 Dec 2011 19:38:27 +0000 (17:38 -0200)]
Remove the false information that IA-64 supports SSE2
This must have been a mistake. IA-64 processors used to contain an
IA-32 core, which supported SSE2. However, the IA-64 mode supported no
such thing.
Change-Id: I731c6018166af6b897cb697c68aad4ef3ae93132
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Oswald Buddenhagen [Tue, 20 Mar 2012 18:34:41 +0000 (19:34 +0100)]
support relative Sysroot specification in qt.conf
permits relocatable qmake installations in, say, $sysroot/hosttools/.
note that it makes patently no sense to have a relative Prefix when
using a relative Sysroot.
Change-Id: I36e5149acb20a885c3cd244bc9d67aa48b01a56f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Oswald Buddenhagen [Tue, 20 Mar 2012 17:55:28 +0000 (18:55 +0100)]
make unspecified/empty HostPrefix fall back to Prefix
this is needed for backwards-compatibility, and generally makes sense.
Task-number: QTBUG-24839
Change-Id: I42b008a9dfb43cc2ebe49c8baa2c29f5d6a75897
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
aavit [Wed, 21 Mar 2012 08:50:35 +0000 (09:50 +0100)]
More UTF8 fix of raster autotest
This completes 6c98fd2, for systems where default codec is not UTF8.
Change-Id: I94795785d5d172558c40c06bd3ef4ffaba1624c5
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Samuel Rødal [Thu, 22 Mar 2012 13:14:39 +0000 (14:14 +0100)]
Fixed QScreen::name() return value on xcb.
Previously the primary sceen number wasn't stripped before adding the
actual screen number, resulting in names such as ":0.0.0".
Change-Id: Ifbcf12dcf1c200fd6bc5e4b95a5d82483957e0d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
David Faure [Wed, 21 Mar 2012 17:24:38 +0000 (18:24 +0100)]
Fix assert in libdbus-1 from tst_qdbusmarshall.
Serializing an empty object path was crashing with
> arguments to dbus_message_iter_append_basic() were incorrect,
> assertion "_dbus_check_is_valid_path (*string_p)" failed in file
> dbus-message.c line 2555.
Thiago says this depends on the libdbus build settings, which is why
it didn't happen to everyone. OpenSUSE-12.1 here.
Change-Id: I657d28d5d915706a22abfd273aad88d20e2d112a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Shane Kearns [Thu, 22 Mar 2012 16:32:39 +0000 (16:32 +0000)]
Add configure bootstrap generated files to .gitignore
Change-Id: Ic538f46eabdf3de96d79c6e2f56627e47933bbab
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Shane Kearns [Thu, 15 Mar 2012 17:58:22 +0000 (17:58 +0000)]
Allow autobound UDP sockets to send to IPv4 and IPv6
When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Damir Tatalovic [Fri, 2 Mar 2012 16:43:52 +0000 (17:43 +0100)]
MIPS DSP configure detection and initial blend optimizations.
Adds new MIPS configure test and -no-mips_dsp and -no-mips_dspr2
configure options.
List of optimized implementations:
- comp_func_SourceOver
- comp_func_Source
- qt_memfill32
- qt_destFetchARGB32
- qt_destStoreARGB32
- blend [RGB32][RGB32]
- blend [ARGB32_Pre][RGB32]
- blend [RGB32][ARGB32_Pre]
- blend [ARGB32_Pre][ARGB32_Pre]
Change-Id: I35411858295b7b3f4895eb56e3b93397528903cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
David Faure [Thu, 15 Mar 2012 22:22:34 +0000 (23:22 +0100)]
QStandardPaths: implement displayName() on all platforms.
It was only implemented on Mac OSX until now (all this came from the
QDesktopServices code).
Change-Id: I7fd81d80ca77cf0ca6c213f59813a6163abe7dc5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Lars Knoll [Tue, 20 Mar 2012 19:45:27 +0000 (20:45 +0100)]
Significantly speed up insertion into QJsonObject/Array
The code was only allocating memory for the next insertion
leading to a reallocation of the whole data for every
single insertion.
The code now reserves some space and uses a decent growth
strategy to avoid repeated reallocs.
Change-Id: I48b0feab71ba8ca73e7037f8460080f198b2f009
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
Donald Carr [Wed, 21 Mar 2012 14:10:01 +0000 (14:10 +0000)]
Remove legacy font cache from 3rdparty
Change-Id: I5a02251565c0c72e8762c0b41cdf5802c7df1938
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Thiago Macieira [Thu, 22 Sep 2011 11:18:11 +0000 (13:18 +0200)]
Fix cross-compilation that uses fontconfig / freetype
config.tests/unix/freetype.pri has a !cross_compile flag, so we must
find freetype using the proper detection methods. The detection was
inside an X11 section of configure, so move that out.
And use the results of that detection, now that QMAKE_CFLAGS_X11 isn't
used (since we're not building X11 in QtPlatformSupport).
Change-Id: Ic8f5cfb7263849bfb12967756def2b5aaa244872
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Thiago Macieira [Tue, 3 Jan 2012 14:10:36 +0000 (12:10 -0200)]
Fix the bsymbolic_functions test and improve the error reporting
The bsymbolic_functions test was missing $SYSROOT_FLAG, so the linking
was always failing and the test falsely negative.
Also make the error reporting better: if the flag was requested, error
out if the check fails and report more information in -v mode.
Change-Id: Ie2615f8083e7e58d63d9ee9c23be937dc864b30d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>