Yanteng Si [Wed, 7 Jun 2023 09:21:50 +0000 (17:21 +0800)]
ALSA: hda: Using polling mode for loongson controller by default
On loongson controller, RIRBSTS.RINTFL cannot be cleared,
azx_interrupt() is called all the time. We disable RIRB
interrupt, and use polling mode by default.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/d309a75424d438b958d90d797b4f1ba45468e090.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yanteng Si [Wed, 7 Jun 2023 09:21:49 +0000 (17:21 +0800)]
ALSA: hda: Add Loongson LS7A HD-Audio support
Add the new PCI ID 0x0014 0x7a07 and the new PCI ID 0x0014 0x7a37
Loongson HDA controller.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/993587483b9509796b29a416f257fcfb4b15c6ea.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 6 Jun 2023 09:40:35 +0000 (11:40 +0200)]
ALSA: control: Keep the previous numid at snd_ctl_rename_id()
We don't need to change the numid at each time snd_ctl_rename_id() is
called, as the control element size itself doesn't change. Let's keep
the previous numid value.
Along with it, add a note about calling this function only in the
card init phase.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606094035.14808-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stefan Binding [Tue, 6 Jun 2023 10:34:36 +0000 (11:34 +0100)]
ALSA: hda/realtek: Delete cs35l41 component master during free
This ensures that the driver is properly cleaned up when freed.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230606103436.455348-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stefan Binding [Tue, 6 Jun 2023 10:34:35 +0000 (11:34 +0100)]
ALSA: hda: cs35l41: Fix endian conversions
Found during static analysis, ensure variables are correct
types before endian conversion.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230606103436.455348-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stefan Binding [Tue, 6 Jun 2023 10:34:34 +0000 (11:34 +0100)]
ALSA: hda: cs35l41: Clean up Firmware Load Controls
Ensure Firmware Load control and Firmware Type control
returns 1 when the value changes.
Remove fw_mutex from firmware load control put, since it is
unnecessary, and prevents any possibility of mutex inversion.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230606103436.455348-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 5 Jun 2023 14:49:20 +0000 (16:49 +0200)]
Merge branch 'topic/midi20' into for-next
Pull fixes for a couple of minor issues spotted by bots.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 5 Jun 2023 14:47:58 +0000 (16:47 +0200)]
ALSA: seq: Avoid confusion of aligned read size
Currently the read event packet size in snd_seq_read() is defined by
client->midi_version value that is guaranteed to be zero if UMP isn't
enabled. But the static analyzer doesn't know of the fact, and it
still suspects as if it were leading to a potential overflow.
Add the more explicit check of CONFIG_SND_SEQ_UMP to determine the
aligned_size value for avoiding the confusion.
Fixes:
46397622a3fa ("ALSA: seq: Add UMP support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/
202305261415.NY0vapZK-lkp@intel.com/
Link: https://lore.kernel.org/r/20230605144758.6677-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 5 Jun 2023 14:47:57 +0000 (16:47 +0200)]
ALSA: usb-audio: Use __le16 for 16bit USB descriptor fields
Use proper notion for 16bit values for fixing the sparse warnings.
Fixes:
f8ddb0fb3289 ("ALSA: usb-audio: Define USB MIDI 2.0 specs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202305260528.wcqjXso8-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/
202305270534.odwHL9F0-lkp@intel.com/
Link: https://lore.kernel.org/r/20230605144758.6677-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Fri, 26 May 2023 10:16:59 +0000 (12:16 +0200)]
ALSA: emu10k1: vastly improve usefulness of info in /proc
- Include the FX bus map, without which the already present send routing
info would require looking up the documentation.
- Include the physical I/O channels as known to the driver
- Make the multi-channel capture map actually name the mapped input
channels rather than "FXBUS" (Audigy) or even "???" (SbLive)
- The latter two are omitted for E-MU cards, as their physical I/O is
routed through the FPGA
- While at it, make the "Card" field somewhat more useful
This includes de-duplicating the label tables between emuproc and emufx,
updating/improving the FX bus label table, and making the SB Live! 5.1
multi-track capture channel mapping hack data-driven.
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Fri, 26 May 2023 10:16:58 +0000 (12:16 +0200)]
ALSA: emu10k1: make E-MU FPGA register dump in /proc more useful
Include the routing information, which can be actually read back.
Somewhat as a drive-by, make the register dump format less obscure - the
previous one made no sense at all.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Fri, 26 May 2023 10:16:57 +0000 (12:16 +0200)]
ALSA: emu10k1: include FX send amounts in /proc output
It seems to make little sense to include the FX send routing, but not
the amounts.
This also simplifies the code somewhat, and lines up the output.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Mon, 29 May 2023 09:55:04 +0000 (11:55 +0200)]
ALSA: emu10k1: actually disassemble DSP instructions in /proc
fx8010_acode is supposed to be a human-readable representation; the
binary is already in fx8010_code.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230529095504.559054-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Fri, 26 May 2023 10:16:55 +0000 (12:16 +0200)]
ALSA: emu10k1: fix writing 1st pointer-offset register set through /proc
The limits were appropriate only for the 2nd set.
FWIW, the channel count 4 for the 2nd set is suspicious as well - at
least P17V_PLAYBACK_FIFO_PTR actually has 8 channels, and comments on
HCFG2 hint at that as well. But all bitmasks are documented only for 4
channels. Anyway, rectifying that is out of scope for this patch.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Fri, 26 May 2023 10:16:54 +0000 (12:16 +0200)]
ALSA: emu10k1: hide absent 2nd pointer-offset register set from /proc
The 2nd register set belongs to the P16V chip (or embedded P17V module),
so there is nothing to show when no such part is present. Gen2 E-MU
cards have a P17V, but it's entirely unused, so we hide it there as
well.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Uwe Kleine-König [Thu, 25 May 2023 20:36:40 +0000 (22:36 +0200)]
ALSA: Switch i2c drivers back to use .probe()
After commit
b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230525203640.677826-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 25 May 2023 08:33:11 +0000 (10:33 +0200)]
Merge branch 'topic/midi20' into for-next
Pull yet more fixes for UMP core.
All about the legacy MIDI support code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 25 May 2023 08:31:24 +0000 (10:31 +0200)]
ALSA: ump: Fix parsing of 0xFx command
The MIDI 1.0 parser retrieved the 0xFx command with a wrong bit shift,
resulting in the bogus type. Fix the bit shift size.
Fixes:
0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/
0fbc0b27-54b8-4cda-800e-
37e7a03fed39@kili.mountain
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20230525083124.15277-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 25 May 2023 08:31:23 +0000 (10:31 +0200)]
ALSA: ump: Drop redundant check of note-on with zero velocity
The check of a note-on event with zero velocity is done twice, and the
latter one is superfluous. Let's drop it.
Fixes:
0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/
4683198a-84f6-4238-9e87-
c70667d84523@kili.mountain
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20230525083124.15277-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 20:07:09 +0000 (22:07 +0200)]
ALSA: emu10k1: fix multi-channel capture config for E-MU cards
On SB cards the number of captured channels is derived from the voice
mask mixer control. But for E-MU cards this wasn't actually "wired up",
so changing the mask would simply mess up the recording.
We could fix that, but the channel routing through the FPGA makes the
masking redundant. So instead we hide the control, and let the user
specify the PCM channel count the traditional way.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 20:07:08 +0000 (22:07 +0200)]
ALSA: emu10k1: don't restrict capture channel count to powers of two
The hardware can deal with primes up to 7 and power-of-two multiples
thereof; the limitation is reflected by the possible buffer sizes.
Note that setting the voice mask will not allow more than 16 channels
even on Sound Blaster Audigy anymore, as 32 seems a bit excessive (the
code overall appears to think so, just not in this case).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 20:07:07 +0000 (22:07 +0200)]
ALSA: emu10k1: fix support for 24 kHz capture
We need to specify that the hardware supports non-standard rates, as
otherwise the sound core creates a constraint which limits the rate to
the specified standard rates. That also made the rate constraint we were
already adding meaningless.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 20:07:06 +0000 (22:07 +0200)]
ALSA: emu10k1: fix capture buffer size confusion
The buffer size register sets the size of the whole buffer, not just one
period. We actually handled it like that, except that the constraint was
set on the wrong parameter. The period size is implicitly constrained by
the buffer size and the fixed period count of 2.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 20:07:09 +0000 (22:07 +0200)]
ALSA: emu10k1: make channel count of multi-channel playback flexible
There is no reason to nail it to 16 channels.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 20:07:08 +0000 (22:07 +0200)]
ALSA: emu10k1: add synchronized start of multi-channel playback
We use independent voices for the channels, so we need to make an effort
to ensure that they are actually in sync.
The hardware doesn't provide atomicity, so we may need to retry a few
times, due to NMIs, PCI contention, and the wrong phase of the moon.
Solution inspired by kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 20:07:07 +0000 (22:07 +0200)]
ALSA: emu10k1: don't limit multi-channel playback to two periods
For unclear reasons, the extra voice was set up with half the buffer
size instead of the period size. Commit
27ae958cf6 ("emu10k1 driver -
add multichannel device hw:x,3 [2-8/8]") mentions half-loop interrupts,
so maybe this was an artifact of an earlier iteration of the patch.
While at it, also fix periods_min of the regular playback - one period
makes just no sense.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 24 May 2023 07:10:09 +0000 (09:10 +0200)]
Merge branch 'topic/midi20' into for-next
Pull a fixup for build error on big-endian archs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stephen Rothwell [Wed, 24 May 2023 03:54:48 +0000 (13:54 +1000)]
ALSA: ump: Correct snd_ump_midi1_msg_program definition
The #endif is placed obviously at a wrong position, which caused a
build error on the big endian machine.
Fixes:
0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20230524135448.3ecad334@canb.auug.org.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 12:14:41 +0000 (14:14 +0200)]
Merge branch 'topic/midi20' into for-next
This is a (largish) patch set for adding the support of MIDI 2.0
functionality, mainly targeted for USB devices. MIDI 2.0 is a
complete overhaul of the 40-years old MIDI 1.0. Unlike MIDI 1.0 byte
stream, MIDI 2.0 uses packets in 32bit words for Universal MIDI Packet
(UMP) protocol. It supports both MIDI 1.0 commands for compatibility
and the extended MIDI 2.0 commands for higher resolutions and more
functions.
For supporting the UMP, the patch set extends the existing ALSA
rawmidi and sequencer interfaces, and adds the USB MIDI 2.0 support to
the standard USB-audio driver.
The rawmidi for UMP has a different device name (/dev/snd/umpC*D*) and
it reads/writes UMP packet data in 32bit CPU-native endianness. For
the old MIDI 1.0 applications, the legacy rawmidi interface is
provided, too.
As default, USB-audio driver will take the alternate setting for MIDI
2.0 interface, and the compatibility with MIDI 1.0 is provided via the
rawmidi common layer. However, user may let the driver falling back
to the old MIDI 1.0 interface by a module option, too.
A UMP-capable rawmidi device can create the corresponding ALSA
sequencer client(s) to support the UMP Endpoint and UMP Group
connections. As a nature of ALSA sequencer, arbitrary connections
between clients/ports are allowed, and the ALSA sequencer core
performs the automatic conversions for the connections between a new
UMP sequencer client and a legacy MIDI 1.0 sequencer client. It
allows the existing application to use MIDI 2.0 devices without
changes.
The MIDI-CI, which is another major extension in MIDI 2.0, isn't
covered by this patch set. It would be implemented rather in
user-space.
Roughly speaking, the first half of this patch set is for extending
the rawmidi and USB-audio, and the second half is for extending the
ALSA sequencer interface.
The patch set is based on 6.4-rc2 kernel, but all patches can be
cleanly applicable on 6.2 and 6.3 kernels, too (while 6.1 and older
kernels would need minor adjustment for uapi header changes).
The updates for alsa-lib and alsa-utils will follow shortly later.
The author thanks members of MIDI Association OS/API Working Group,
especially Andrew Mee, for great helps for the initial design and
debugging / testing the drivers.
Link: https://lore.kernel.org/r/20230523075358.9672-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 10:46:12 +0000 (12:46 +0200)]
ALSA: emu10k1: pass raw FX send config to snd_emu10k1_pcm_init_voice()
... instead of passing in a high-level mixer struct. Let the
higher-level functions handle the differences between the voice types.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523104612.198884-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 23 May 2023 10:46:11 +0000 (12:46 +0200)]
ALSA: emu10k1: introduce higher-level voice manipulation functions
This adds snd_emu10k1_pcm_init_{voices,extra_voice}() and
snd_emu10k1_playback_{un,}mute_voices() to slightly abstract by voice
function and potential stereo property.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523104612.198884-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:58 +0000 (09:53 +0200)]
ALSA: docs: Add MIDI 2.0 documentation
Add the brief document for describing the MIDI 2.0 implementation on
Linux kernel. Both rawmidi and sequencer API extensions are
described.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-38-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:57 +0000 (09:53 +0200)]
ALSA: seq: Add UMP group filter
Add a new filter bitmap for UMP groups for reducing the unnecessary
read/write when the client is connected to UMP EP seq port.
The new group_filter field contains the bitmap for the groups, i.e.
when the bit is set, the corresponding group is filtered out and
the messages to that group won't be delivered.
The filter bitmap consists of each bit of 1-based UMP Group number.
The bit 0 is reserved for the future use.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:56 +0000 (09:53 +0200)]
ALSA: seq: Print UMP Endpoint and Block information in proc outputs
This patch enhances the /proc/asound/seq/clients output to show a few
more information about the assigned UMP Endpoint and Blocks.
The "Groups" are shown in 1-based group number to align with the
sequencer client name and port number.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-36-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:55 +0000 (09:53 +0200)]
ALSA: seq: Add ioctls for client UMP info query and setup
Add new ioctls for sequencer clients to query and set the UMP endpoint
and block information.
As a sequencer client corresponds to a UMP Endpoint, one UMP Endpoint
information can be assigned at most to a single sequencer client while
multiple UMP block infos can be assigned by passing the type with the
offset of block id (i.e. type = block_id + 1).
For the kernel client, only SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO is
allowed.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-35-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:54 +0000 (09:53 +0200)]
ALSA: seq: ump: Create UMP Endpoint port for broadcast
Create a sequencer port for broadcasting the all group inputs at the
port number 0. This corresponds to a UMP Endpoint connection;
application can read all UMP events from this port no matter which
group the UMP packet belongs to.
Unlike seq ports for other UMP groups, a UMP Endpoint port has no
SND_SEQ_PORT_TYPE_MIDI_GENERIC bit, so that it won't be treated as a
normal MIDI 1.0 device from legacy applications.
The port is named as "MIDI 2.0" to align with representations on other
operation systems.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-34-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:53 +0000 (09:53 +0200)]
ALSA: seq: Bind UMP device
This patch introduces a new ALSA sequencer client for the kernel UMP
object, snd-seq-ump-client. It's a UMP version of snd-seq-midi
driver, while this driver creates a sequencer client per UMP endpoint
which contains (fixed) 16 ports.
The UMP rawmidi device is opened in APPEND mode for output, so that
multiple sequencer clients can share the same UMP endpoint, as well as
the legacy UMP rawmidi devices that are opened in APPEND mode, too.
For input, on the other hand, the incoming data is processed on the
fly in the dedicated hook, hence it doesn't open a rawmidi device.
The UMP packet group is updated upon delivery depending on the target
sequencer port (which corresponds to the actual UMP group).
Each sequencer port sets a new port type bit,
SNDRV_SEQ_PORT_TYPE_MIDI_UMP, in addition to the other standard
types for MIDI.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:52 +0000 (09:53 +0200)]
ALSA: seq: Allow suppressing UMP conversions
A sequencer client like seq_dummy rather doesn't want to convert UMP
events but receives / sends as is. Add a new event filter flag to
suppress the automatic UMP conversion and applies accordingly.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-32-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:51 +0000 (09:53 +0200)]
ALSA: seq: Automatic conversion of UMP events
This patch enables the automatic conversion of UMP events from/to the
legacy ALSA sequencer MIDI events. Also, as UMP itself has two
different modes (MIDI 1.0 and MIDI 2.0), yet another converters
between them are needed, too. Namely, we have conversions between the
legacy and UMP like:
- seq legacy event -> seq UMP MIDI 1.0 event
- seq legacy event -> seq UMP MIDI 2.0 event
- seq UMP MIDI 1.0 event -> seq legacy event
- seq UMP MIDI 2.0 event -> seq legacy event
and the conversions between UMP MIDI 1.0 and 2.0 clients like:
- seq UMP MIDI 1.0 event -> seq UMP MIDI 2.0 event
- seq UMP MIDI 2.0 event -> seq UMP MIDI 1.0 event
The translation is per best-effort; some MIDI 2.0 specific events are
ignored when translated to MIDI 1.0.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-31-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:50 +0000 (09:53 +0200)]
ALSA: seq: Add UMP group number to snd_seq_port_info
Add yet more new filed "ump_group" to snd_seq_port_info for specifying
the associated UMP Group number for each sequencer port. This will be
referred in the upcoming automatic UMP conversion in sequencer core.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:49 +0000 (09:53 +0200)]
ALSA: seq: Add port direction to snd_seq_port_info
Add a new field "direction" to snd_seq_port_info for allowing a client
to tell the expected direction of the port access. A port might still
allow subscriptions for read/write (e.g. for MIDI-CI) even if the
primary usage of the port is a single direction (either input or
output only). This new "direction" field can help to indicate such
cases.
When the direction is unspecified at creating a port and the port has
either read or write capability, the corresponding direction bits are
set automatically as default.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:48 +0000 (09:53 +0200)]
ALSA: seq: Support MIDI 2.0 UMP Endpoint port
This is an extension to ALSA sequencer infrastructure to support the
MIDI 2.0 UMP Endpoint port. It's a "catch-all" port that is supposed
to be present for each UMP Endpoint. When this port is read via
subscription, it sends any events from all ports (UMP Groups) found in
the same client.
A UMP Endpoint port can be created with the new capability bit
SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT. Although the port assignment isn't
strictly defined, it should be the port number 0.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-28-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:47 +0000 (09:53 +0200)]
ALSA: seq: Add port inactive flag
This extends the ALSA sequencer port capability bit to indicate the
"inactive" flag. When this flag is set, the port is essentially
invisible, and doesn't appear in the port query ioctls, while the
direct access and the connection to this port are still allowed. The
active/inactive state can be flipped dynamically, so that it can be
visible at any time later.
This feature is introduced basically for UMP; some UMP Groups in a UMP
Block may be unassigned, hence those are practically invisible. On
ALSA sequencer, the corresponding sequencer ports will get this new
"inactive" flag to indicate the invisible state.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-27-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:46 +0000 (09:53 +0200)]
ALSA: seq: Add UMP support
Starting from this commit, we add the basic support of UMP (Universal
MIDI Packet) events on ALSA sequencer infrastructure. The biggest
change here is that, for transferring UMP packets that are up to 128
bits, we extend the data payload of ALSA sequencer event record when
the client is declared to support for the new UMP events.
A new event flag bit, SNDRV_SEQ_EVENT_UMP, is defined and it shall be
set for the UMP packet events that have the larger payload of 128
bits, defined as struct snd_seq_ump_event.
For controlling the UMP feature enablement in kernel, a new Kconfig,
CONFIG_SND_SEQ_UMP is introduced. The extended event for UMP is
available only when this Kconfig item is set. Similarly, the size of
the internal snd_seq_event_cell also increases (in 4 bytes) when the
Kconfig item is set. (But the size increase is effective only for
32bit architectures; 64bit archs already have padding there.)
Overall, when CONFIG_SND_SEQ_UMP isn't set, there is no change in the
event and cell, keeping the old sizes.
For applications that want to access the UMP packets, first of all, a
sequencer client has to declare the user-protocol to match with the
latest one via the new SNDRV_SEQ_IOCTL_USER_PVERSION; otherwise it's
treated as if a legacy client without UMP support.
Then the client can switch to the new UMP mode (MIDI 1.0 or MIDI 2.0)
with a new field, midi_version, in snd_seq_client_info. When switched
to UMP mode (midi_version = 1 or 2), the client can write the UMP
events with SNDRV_SEQ_EVENT_UMP flag. For reads, the alignment size
is changed from snd_seq_event (28 bytes) to snd_seq_ump_event (32
bytes). When a UMP sequencer event is delivered to a legacy sequencer
client, it's ignored or handled as an error.
Conceptually, ALSA sequencer client and port correspond to the UMP
Endpoint and Group, respectively; each client may have multiple ports
and each port has the fixed number (16) of channels, total up to 256
channels.
As of this commit, ALSA sequencer core just sends and receives the UMP
events as-is from/to clients. The automatic conversions between the
legacy events and the new UMP events will be implemented in a later
patch.
Along with this commit, bump the sequencer protocol version to 1.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:45 +0000 (09:53 +0200)]
ALSA: seq: Introduce SNDRV_SEQ_IOCTL_USER_PVERSION ioctl
For the future extension of ALSA sequencer ABI, introduce a new ioctl
SNDRV_SEQ_IOCTL_USER_PVERSION. This is similar like the ioctls used
in PCM and other interfaces, for an application to specify its
supporting ABI version.
The use of this ioctl will be mandatory for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:44 +0000 (09:53 +0200)]
ALSA: seq: Prohibit creating ports with special numbers
Some port numbers are special, such as 254 for subscribers and 255 for
broadcast. Return error if application tries to create such a port.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:43 +0000 (09:53 +0200)]
ALSA: seq: Check validity before creating a port object
The client type and the port info validity check should be done before
actually creating a port, instead of unnecessary create-and-scratch.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:42 +0000 (09:53 +0200)]
ALSA: seq: Check the conflicting port at port creation
We didn't check if a port with the given port number has been already
present at creating a new port. Check it and return -EBUSY properly
if the port number conflicts.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:41 +0000 (09:53 +0200)]
ALSA: seq: Drop dead code for the old broadcast support
The broadcast and multicast supports have been never enabled.
Let's drop the dead code.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:40 +0000 (09:53 +0200)]
ALSA: seq: Treat snd_seq_client object directly in client drivers
Introduce the new helpers, snd_seq_kernel_client_get() and _put() for
kernel client drivers to treat the snd_seq_client more directly.
This allows us to reduce the exported symbols and APIs at each time we
need to access some field in future.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:39 +0000 (09:53 +0200)]
ALSA: seq: Add snd_seq_expand_var_event_at() helper
Create a new variant of snd_seq_expand_var_event() for expanding the
data starting from the given byte offset. It'll be used by the new
UMP sequencer code later.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:38 +0000 (09:53 +0200)]
ALSA: seq: Clear padded bytes at expanding events
There can be a small memory hole that may not be cleared at expanding
an event with the variable length type. Make sure to clear it.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:37 +0000 (09:53 +0200)]
ALSA: usb-audio: Inform inconsistent protocols in GTBs
When parsing Group Terminal Blocks, we overwrote the preferred
protocol and the protocol capabilities silently from the last parsed
GTB. This patch adds the information print indicating the unexpected
overrides instead of silent action.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:36 +0000 (09:53 +0200)]
ALSA: usb-audio: Enable the legacy raw MIDI support
Attach the legacy rawmidi devices when enabled in Kconfig accordingly.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-16-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:35 +0000 (09:53 +0200)]
ALSA: ump: Add legacy raw MIDI support
This patch extends the UMP core code to support the legacy MIDI 1.0
rawmidi devices. When the new kconfig CONFIG_SND_UMP_LEGACY_RAWMIDI
is set, the UMP core allows to attach an additional rawmidi device for
each UMP Endpoint. The rawmidi device contains 16 substreams where
each substream corresponds to a UMP Group belonging to the EP. The
device reads/writes the legacy MIDI 1.0 byte streams and translates
from/to UMP packets.
The legacy rawmidi devices are exclusive with the UMP rawmidi devices,
hence both of them can't be opened at the same time unless the UMP
rawmidi is opened in APPEND mode.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:34 +0000 (09:53 +0200)]
ALSA: ump: Redirect rawmidi substream access via own helpers
This is a code refactoring for abstracting the rawmidi access to the
UMP's own helpers. It's a preliminary work for the later code
refactoring of the UMP layer.
Until now, we access to the rawmidi substream directly from the
driver via rawmidi access helpers, but after this change, the driver
is supposed to access via the newly introduced snd_ump_ops and
receive/transmit via snd_ump_receive() and snd_ump_transmit() helpers.
As of this commit, those are merely wrappers for the rawmidi
substream, and no much function change is seen here.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:33 +0000 (09:53 +0200)]
ALSA: usb-audio: Create UMP blocks from USB MIDI GTBs
USB MIDI spec defines the Group Terminal Blocks (GTB) that associate
multiple UMP Groups. Those correspond to snd_ump_block entities in
ALSA UMP abstraction, and now we create those UMP Block objects for
each UMP Endpoint from the parsed GTB information.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:32 +0000 (09:53 +0200)]
ALSA: usb-audio: Trim superfluous "MIDI" suffix from UMP EP name
A single USB audio device may have multiple interfaces for different
purposes (e.g. audio, MIDI and HID), where the iInterface descriptor
of each interface may contain an own suffix, e.g. "MIDI" for a MIDI
interface. as such a suffix is superfluous as a rawmidi and UMP
Endpoint name, this patch trims the superfluous "MIDI" suffix from the
name string.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:31 +0000 (09:53 +0200)]
ALSA: usb-audio: Get UMP EP name string from USB interface
USB descriptor may provide a nicer name for USB interface, and we may
take it as the UMP Endpoint name. The UMP EP name is copied as the
rawmidi name, too.
Also, fill the UMP block product_id field from the iSerialNumber
string of the USB device descriptor as a recommended unique id, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:30 +0000 (09:53 +0200)]
ALSA: usb-audio: USB MIDI 2.0 UMP support
This patch provides a basic support for USB MIDI 2.0. As of this
patch, the driver creates a UMP device per MIDI I/O endpoints, which
serves as a dumb terminal to read/write UMP streams.
A new Kconfig CONFIG_SND_USB_AUDIO_MIDI_V2 manages whether to enable
or disable the MIDI 2.0 support. Also, the driver provides a new
module option, midi2_enable, to allow disabling the MIDI 2.0 at
runtime, too. When MIDI 2.0 support is disabled, the driver tries to
fall back to the already existing MIDI 1.0 device (each MIDI 2.0
device is supposed to provide the MIDI 1.0 interface at the altset
0).
For now, the driver doesn't manage any MIDI-CI or other protocol
setups by itself, but relies on the default protocol given via the
group terminal block descriptors.
The MIDI 1.0 messages on MIDI 2.0 device will be automatically
converted in ALSA sequencer in a later patch. As of this commit, the
driver accepts merely the rawmidi UMP accesses.
The driver builds up the topology in the following way:
- Create an object for each MIDI endpoint belonging to the USB
interface
- Find MIDI EP "pairs" that share the same GTB;
note that MIDI EP is unidirectional, while UMP is (normally)
bidirectional, so two MIDI EPs can form a single UMP EP
- A UMP endpoint object is created for each I/O pair
- For remaining "solo" MIDI EPs, create unidirectional UMP EPs
- Finally, parse GTBs and fill the protocol bits on each UMP
So the driver may support multiple UMP Endpoints in theory, although
most devices are supposed to have a single UMP EP that can contain up
to 16 groups -- which should be large enough.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:29 +0000 (09:53 +0200)]
ALSA: usb-audio: Define USB MIDI 2.0 specs
Define new structs and constants from USB MIDI 2.0 specification,
to be used in the upcoming MIDI 2.0 support in USB-audio driver.
A new class-specific endpoint descriptor and group terminal block
descriptors are defined.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:28 +0000 (09:53 +0200)]
ALSA: usb-audio: Manage number of rawmidis globally
We're going to create rawmidi objects for MIDI 2.0 in a different code
from the current code for USB-MIDI 1.0. As a preliminary work, this
patch adds the number of rawmidi objects to keep globally in a
USB-audio card instance, so that it can be referred from both MIDI 1.0
and 2.0 code.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:27 +0000 (09:53 +0200)]
ALSA: ump: Additional proc output
UMP devices may have more interesting information than the traditional
rawmidi. Extend the rawmidi_global_ops to allow the optional proc
info output and show some more bits in the proc file for UMP.
Note that the "Groups" field shows the first and the last UMP Groups,
and both numbers are 1-based (i.e. the first group is 1).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:26 +0000 (09:53 +0200)]
ALSA: ump: Add ioctls to inquiry UMP EP and Block info via control API
It'd be convenient to have ioctls to inquiry the UMP Endpoint and UMP
Block information directly via the control API without opening the
rawmidi interface, just like SNDRV_CTL_IOCTL_RAWMIDI_INFO.
This patch extends the rawmidi ioctl handler to support those; new
ioctls, SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO and
SNDRV_CTL_IOCTL_UMP_BLOCK_INFO, return the snd_ump_endpoint and
snd_ump_block data that is specified by the device field,
respectively.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:25 +0000 (09:53 +0200)]
ALSA: rawmidi: Skip UMP devices at SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE
Applications may look for rawmidi devices with the ioctl
SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE. Returning a UMP device from this
ioctl may confuse the existing applications that support only the
legacy rawmidi.
This patch changes the code to skip the UMP devices from the lookup
for avoiding the confusion, and introduces a new ioctl to look for the
UMP devices instead.
Along with this change, bump the CTL protocol version to 2.0.9.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:24 +0000 (09:53 +0200)]
ALSA: rawmidi: UMP support
This patch adds the support helpers for UMP (Universal MIDI Packet) in
ALSA core.
The basic design is that a rawmidi instance is assigned to each UMP
Endpoint. A UMP Endpoint provides a UMP stream, typically
bidirectional (but can be also uni-directional, too), which may hold
up to 16 UMP Groups, where each UMP (input/output) Group corresponds
to the traditional MIDI I/O Endpoint.
Additionally, the ALSA UMP abstraction provides the multiple UMP
Blocks that can be assigned to each UMP Endpoint. A UMP Block is a
metadata to hold the UMP Group clusters, and can represent the
functions assigned to each UMP Group. A typical implementation of UMP
Block is the Group Terminal Blocks of USB MIDI 2.0 specification.
For distinguishing from the legacy byte-stream MIDI device, a new
device "umpC*D*" will be created, instead of the standard (MIDI 1.0)
devices "midiC*D*". The UMP instance can be identified by the new
rawmidi info bit SNDRV_RAWMIDI_INFO_UMP, too.
A UMP rawmidi device reads/writes only in 4-bytes words alignment,
stored in CPU native endianness.
The transmit and receive functions take care of the input/out data
alignment, and may return zero or aligned size, and the params ioctl
may return -EINVAL when the given input/output buffer size isn't
aligned.
A few new UMP-specific ioctls are added for obtaining the new UMP
endpoint and block information.
As of this commit, no ALSA sequencer instance is attached to UMP
devices yet. They will be supported by later patches.
Along with those changes, the protocol version for rawmidi is bumped
to 2.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:23 +0000 (09:53 +0200)]
ALSA: rawmidi: Add ioctl callback to snd_rawmidi_global_ops
A new callback, ioctl, is added to snd_rawmidi_global_ops for allowing
the driver to deal with the own ioctls. This is another preparation
patch for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 23 May 2023 07:53:22 +0000 (09:53 +0200)]
ALSA: rawmidi: Pass rawmidi directly to snd_rawmidi_kernel_open()
snd_rawmidi_kernel_open() is used only internally from ALSA sequencer,
so far, and parsing the card / device matching table at each open is
redundant, as each sequencer client already gets the rawmidi object
beforehand.
This patch optimizes the path by passing the rawmidi object directly
at snd_rawmidi_kernel_open(). This is also a preparation for the
upcoming UMP rawmidi I/O support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Niklas Schnelle [Mon, 22 May 2023 10:50:37 +0000 (12:50 +0200)]
ALSA: add HAS_IOPORT dependencies
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230522105049.1467313-33-schnelle@linux.ibm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gustavo A. R. Silva [Fri, 19 May 2023 20:54:46 +0000 (14:54 -0600)]
ALSA: mixart: Replace one-element arrays with simple object declarations
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. However, in this case it seems those one-element
arrays have never actually been used as fake flexible arrays.
See this code that dates from Linux-2.6.12-rc2 initial git repository build
(commit
1da177e4c3f4 ("Linux-2.6.12-rc2")):
sound/pci/mixart/mixart_core.h:
215 struct mixart_stream_state_req
216 {
217 u32 delayed;
218 u64 scheduler;
219 u32 reserved4np[3];
220 u32 stream_count; /* set to 1 for instance */
221 struct mixart_flow_info stream_info; /* could be an array[stream_count] */
222 } __attribute__((packed));
sound/pci/mixart/mixart.c:
388
389 memset(&stream_state_req, 0, sizeof(stream_state_req));
390 stream_state_req.stream_count = 1;
391 stream_state_req.stream_info.stream_desc.uid_pipe = stream->pipe->group_uid;
392 stream_state_req.stream_info.stream_desc.stream_idx = stream->substream->number;
393
So, taking the code above as example, replace multiple one-element
arrays with simple object declarations, and refactor the rest of the
code, accordingly.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/296
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZGfiFjcL8+r3mayq@work
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:09:47 +0000 (16:09 +0200)]
ALSA: emu10k1: revamp playback voice allocator
Instead of separate voices, we now allocate non-interleaved channels,
which may in turn contain two interleaved voices each. The higher-level
code keeps only one pointer per channel. The channels are not allocated
in one block any more, as there is no reason to do that. As a
consequence of that, and because it is cleaner regardless, we now let
the allocator store these pointers at a specified location, rather than
returning only the first one and having the calling code deduce the
remaining ones.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:09:46 +0000 (16:09 +0200)]
ALSA: emu10k1: make snd_emu10k1_voice_alloc() assign voices' epcm
The voice allocator clearly knows about the field (it resets it), so
it's more consistent (and leads to less duplicated code) to have the
constructor take it as a parameter.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Fri, 19 May 2023 18:41:22 +0000 (20:41 +0200)]
ALSA: emu10k1: centralize freeing PCM voices
This saves some code duplication; no functional change.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230519184122.3808185-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:09:44 +0000 (16:09 +0200)]
ALSA: emu10k1: make freeing untouched playback voices cheap
This allows us to drop the code that tries to preserve already allocated
voices upon repeated hw_param callback invocations. Getting it right for
multi-channel voices would otherwise get a bit hairy.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:09:43 +0000 (16:09 +0200)]
ALSA: emu10k1: improve voice status display in /proc
Eliminate the MIDI type, as there is no such thing - the MPU401 port
doesn't have anything to do with voices.
For clarity, differentiate between regular and extra voices.
Don't atomize the enum into bits in the table display.
Simplify/optimize the storage.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:09:42 +0000 (16:09 +0200)]
ALSA: emu10k1: don't forget to reset reclaimed synth voices
The subsequent allocation may still fail after freeing some voices, so
we shouldn't leave them in their programmed state.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:09:41 +0000 (16:09 +0200)]
ALSA: emu10k1: simplify freeing synth voices
snd_emu10k1_voice_free() resets the hardware itself, so doing that
in the calling function as well is redundant.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:03:39 +0000 (16:03 +0200)]
ALSA: emu10k1: enable bit-exact playback, part 4: send amounts
On Audigy, the send amounts are merely targets, presumably to avoid
sound distortion due to sudden changes, which the EMU8K docu explicitly
warns about.
However, that "soft-start" would prevent bit-for-bit reproduction, so
we now force the current send amounts to their final values at PCM
playback init.
One might want to do that for the MIDI synthesizer as well, though it
seems mostly pointless due to the attack phase each note has anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722279-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:03:38 +0000 (16:03 +0200)]
ALSA: emu10k1: enable bit-exact playback, part 3: pitch
CPF_CURRENTPITCH starts swerving towards PTRX_PITCHTARGET as soon as
that is set. In practice this means that CPF_FRACADDRESS may acquire a
non-zero value before we manage to force CPF_CURRENTPITCH to the final
value, which would prevent bit-for-bit reproduction.
To avoid that this state persists, we now reset CPF_FRACADDRESS when
setting CPF_CURRENTPITCH, and to (mostly) avoid that it progresses too
far in the first place (possibly even reaching CCCA_CURRADDR), we write
PTRX and CPF in one critical section (though NMIs, etc. still make this
unreliable).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722279-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:03:39 +0000 (16:03 +0200)]
ALSA: emu10k1: fix terminating synthesizer voices
Make terminate_voice() actually do at all what it's supposed to do:
instantly and completely shut down the note.
The bogus behavior was mostly harmless, as usually the voice is freed
right afterwards, which implicitly terminates it anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722308-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 14:03:38 +0000 (16:03 +0200)]
ALSA: emu10k1: fix synthesizer sample playback position and caching
Compensate for the cache delay, and actually populate the cache.
Without these, the playback would start with garbage (which would be
(mostly?) masqueraded by the attack phase).
Unlike for the PCM voices, this doesn't try to compensate for the
interpolator read-ahead, because it's pointless to be super-exact here.
Note that this code is probably still broken for particularly short
samples, because we ignore the loop-related parts of CCR. But I'm not
going to reverse-engineer that now ...
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722308-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tom Rix [Thu, 18 May 2023 12:38:26 +0000 (08:38 -0400)]
ALSA: emu10k1: set variables emu1010_routing_info and emu1010_pads_info storage-class-specifier to static
smatch reports
sound/pci/emu10k1/emumixer.c:519:39: warning: symbol
'emu1010_routing_info' was not declared. Should it be static?
sound/pci/emu10k1/emumixer.c:859:36: warning: symbol
'emu1010_pads_info' was not declared. Should it be static?
These variables are only used in their defining file, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518123826.925752-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 09:31:34 +0000 (11:31 +0200)]
ALSA: emu10k1: introduce and use snd_emu10k1_ptr_write_multiple()
While this nicely denoises the code, the real intent is being able to
write many registers pseudo-atomically, which will come in handy later.
Idea stolen from kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093134.3697955-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 09:30:47 +0000 (11:30 +0200)]
ALSA: emu10k1: fix handling of half-loop interrupts
We'd try to iterate the voices twice without resetting the pointer.
This went unnoticed, because the code isn't actually in use.
Amends commit
27ae958cf6 ("emu10k1 driver - add multichannel device
hw:x,3 [2-8/8]").
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 09:30:46 +0000 (11:30 +0200)]
ALSA: emu10k1: simplify interrupt handler, part 3
Handle the "timeout" (actually the retry counter) such that it's more
obvious and causes less cost in the normal case.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 09:30:45 +0000 (11:30 +0200)]
ALSA: emu10k1: simplify interrupt handler, part 2
Remove weird INTE_* clearing code. The bits were a subset of the
actually handled interrupts, which kind of contradicted the stated
purpose. I suppose it would make sense to complete the set and negate
it, but interrupts being enabled out of the blue is neither something
that happens a lot, nor should it result in just one error message, IMO.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 09:30:44 +0000 (11:30 +0200)]
ALSA: emu10k1: simplify interrupt handler, part 1
IPR_CHANNELNUMBERMASK cannot be non-zero when IPR_CHANNELLOOP is unset,
so join marking them as handled.
This logically reverts part of commit
f453e20d8a0 ("ALSA update
0.9.3a"), which made the inverse change with no explanation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Thu, 18 May 2023 09:22:24 +0000 (11:22 +0200)]
ALSA: emu10k1: fix PCM playback buffer size constraints
The period_bytes_min parameter and the buffer_bytes minimum constraint
made no sense at all, as they didn't reflect any hardware limitation.
Instead, apply a frame-based period_size minimum constraint, which is
derived from the cache size (it would be actually possible to go below
that, but it would require special handling, and it would be practically
impossible to keep up with the IRQ rate anyway).
Sync up the constraints of the EFX playback with those of the regular
playback, as there is no reason for them to diverge.
N.b., the maximum buffer size is actually arbitrary - the hardware could
go waay beyond 128 KiB.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518092224.3696958-9-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:56 +0000 (19:42 +0200)]
ALSA: emu10k1: refactor PCM playback address handling
Pull the special handling of extra voices out of
snd_emu10k1_pcm_init_voice(), simplify snd_emu10k1_playback_pointer(),
and make the logic overall clearer. Also, add verbose comments.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-9-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:55 +0000 (19:42 +0200)]
ALSA: emu10k1: refactor PCM playback cache filling
Rename snd_emu10k1_playback_invalidate_cache() to the more apt
snd_emu10k1_playback_fill_cache(), and factor out
snd_emu10k1_playback_prepare_voices(), which calls the former for all
channels.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:54 +0000 (19:42 +0200)]
ALSA: emu10k1: improve API of low-level voice manipulation functions
Originally, there was a 1:1 relationship between the PCM streams' and
the low-level voices' parameters. The addition of multi-channel playback
partially invalidated that, but didn't introduce proper layering, so
things kept working only by virtue of the multi-channel device never
having two channels (yet). The upcoming addition of 32-bit playback
would complete upending the relationships.
So this patch detaches the low-level parameters from the high-level
ones: we pass pre-calculated bit width and stereo flags to the low-level
manipulation functions instead of calculating them in-place from the
stream parameters.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:52 +0000 (19:42 +0200)]
ALSA: emu10k1: fix PCM playback cache and interrupt handling
The cache causes a fixed delay regardless of stream parameters.
Consequently, all that "cache invalidate size" calculation stuff was
garbage (which can be traced right back to Creative's OSS driver).
This also removes the definitions of registers CD1..CDF, because they
are accessed only relative to CD0 anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:51 +0000 (19:42 +0200)]
ALSA: emu10k1: skip pointless cache setup for extra voices
Given that the data is going to be ignored anyway, and that the cache
does not influence interrupt timing (which is the purpose of the extra
voices), it's pointless to pre-fill the cache.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:50 +0000 (19:42 +0200)]
ALSA: emu10k1: remove pointless displacement of the extra voices
The idea is to make the extra voice lag behind the "real" voices, but
moving the buffer address around doesn't contribute to that, as the CCCA
write below uses the same address. The exact address is unimportant, as
the data is discarded anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:49 +0000 (19:42 +0200)]
Revert "ALSA: emu10k1 - delay the PCM interrupts (add pcm_irq_delay parameter)"
This workaround fails to address the underlying problem, which is
actually wholly self-made. Subsequent patches will fix it.
This reverts commit
56385a12d9bb9e173751f74b6c430742018cafc0.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 17:42:48 +0000 (19:42 +0200)]
ALSA: emu10k1: pass frame instead of byte addresses
... to snd_emu10k1_pcm_init_voice(). This makes the code arguably less
convoluted.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Wed, 17 May 2023 16:48:00 +0000 (18:48 +0200)]
ALSA: emu10k1: remove runtime 64-bit divisions
32-bit platforms don't like these. As we're actually dealing with
constants, factor out the calculations and pass them in as additional
arguments. To keep the call sites clean, wrap the actual functions in
macros which generate the arguments.
Fixes:
bb5ceb43b7bf ("ALSA: emu10k1: fix non-zero mixer control defaults in highres mode")
Fixes:
1298bc978afb ("ALSA: emu10k1: enable bit-exact playback, part 1: DSP attenuation")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202305171622.jKTovBvy-lkp@intel.com/
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Closes: https://lore.kernel.org/r/CA+G9fYsShNP=LALHdMd-Btx3PBtO_CjyBNgpStr9fPGXNbRvdg@mail.gmail.com
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517164800.3650699-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 16 May 2023 09:36:12 +0000 (11:36 +0200)]
ALSA: emu10k1: make struct snd_emu1010 less wasteful
Shrink the {in,out}put_source arrays and their data type to what is
actually necessary.
To be still on the safe side, add some static asserts.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-11-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 16 May 2023 09:36:11 +0000 (11:36 +0200)]
ALSA: emu10k1: add explicit support for E-MU 0404
Unlike the other models, this is actually a distinct card, rather than
an E-MU 1010 with different "dongles". It is stereo only, and supports
no ADAT (there is no trace of ADAT in the manual, switching the output
mode to ADAT has no effect, and switching the input mode to ADAT just
breaks input (presumably ... my only ADAT source is the card's output)).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-10-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oswald Buddenhagen [Tue, 16 May 2023 09:36:10 +0000 (11:36 +0200)]
ALSA: emu10k1: improve mixer controls for E-MU 1010 rev2 card
This card has rather different inputs/outputs due to switching from the
AudioDock to the MicroDock.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-9-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>