Andrew Davis [Wed, 2 Aug 2023 15:33:29 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix uart node to conform with DT binding
This node does not follow the DT binding schema, correct this.
The arm,pl011 binding requires the first clock to be named "uartclk".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:28 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix vbus_reg node to conform with DT binding
This node does not follow the DT binding schema, correct this.
All "regulator-fixed" are voltage type, so drop "regulator-type".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:27 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix sram node to conform with DT binding
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:26 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix cpu node to conform with DT binding
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:25 +0000 (10:33 -0500)]
ARM: dts: nspire: Use syscon-reboot to handle restart
Writing this bit can be handled by the syscon-reboot driver.
Add this node to DT.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:58:17 +0000 (10:58 +0200)]
Merge tag 'samsung-dt-6.6' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.6
1. Galaxy S II: correct LCD screen's physical size.
2. Add Samsung Galaxy Tab 3 8.0 boards (Exynos4212).
3. Galaxy S3 family: add USB connector and USB OTG. Full USB OTG still
seems not to work, but at least HDMI improved and dtbs_check is
happy.
4. Fix issues pointed out by dtbs_check and W=1: unit addresses, use
'gpios' suffix over 'gpio', update i2c-arb device node to newer
binding.
5. Few white-space cleanups.
* tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
ARM: dts: samsung: exynos5250-snow: switch i2c-arb to new child variant
ARM: dts: samsung: exynos5250-snow: use 'gpios' suffix for i2c-arb
ARM: dts: samsung: fix Exynos4212 Tab3 makefile entries
ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
ARM: dts: s5pv210: minor whitespace cleanup around '='
ARM: dts: exynos: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230810151250.220202-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:57:42 +0000 (10:57 +0200)]
Merge tag 'samsung-dt64-6.6' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.6
1. Add dedicated compatibles for PWM block.
2. Add PWM to ExynosAutov9 SADK board.
3. Few white-space and other cleanups.
* tag 'samsung-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: exynos5433-tm2: drop redundant status=okay
arm64: dts: exynos: add pwm node for exynosautov9-sadk
dt-bindings: pwm: samsung: add exynosautov9 compatible
arm64: dts: fsd: minor whitespace cleanup around '='
arm64: dts: exynos: minor whitespace cleanup around '='
arm64: dts: exynos: add missing space before {
Link: https://lore.kernel.org/r/20230810151250.220202-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:56:57 +0000 (10:56 +0200)]
Merge tag 'aspeed-6.6-devicetree-2' of git://git./linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.6
- New machines
* Inventec's Starscream AST2600 BMC, for a x86 server platform
* Meta's Yossemite 4 AST2600 BMC, for a multi-node server platform
- Big device tree rework for IBM's Power10 BMC platforms
- Updates for wedge400 and Mt Mitchell
- AST2600 I3C and VUART descriptions
* tag 'aspeed-6.6-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: Add AST2600 I3C control pins
ARM: dts: aspeed: everest: Move common devices up
ARM: dts: aspeed: everest: Reorganise FSI description
ARM: dts: aspeed: rainier: Reorganise FSI description
ARM: dts: aspeed: bonnell: Reorganise FSI description
ARM: dts: aspeed: Add P10 FSI descriptions
ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC
dt-bindings: arm: aspeed: add Facebook Yosemite 4 board
ARM: dts: aspeed: wedge400: Set eMMC max frequency
ARM: dts: aspeed: wedge400: Enable more ADC channels
ARM: dts: aspeed: Update spi alias in Facebook AST2500 Common dtsi
ARM: dts: aspeed: rainier: Remove TPM device
ARM: dts: aspeed: Add AST2600 VUARTs
ARM: dts: aspeed: mtmitchell: Add MCTP
ARM: dts: aspeed: mtmitchell: Update ADC sensors for Mt.Mitchell DVT systems
ARM: dts: aspeed: mtmitchell: Enable the BMC UART8 and UART9
ARM: dts: aspeed: Adding Inventec Starscream BMC
dt-bindings: arm: aspeed: add Inventec starscream-bmc
ARM: dts: aspeed: bonnell: Add DIMM SPD
Link: https://lore.kernel.org/r/CACPK8Xc76O5kLEAXRtbFXZcP=ObrKR0Kpez_er+zV2vZffZe7A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:56:09 +0000 (10:56 +0200)]
Merge tag 'omap-for-v6.6/dt-take2-signed' of git://git./linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.6
Updates for opp and pinctrl nodes to follow the devicetree bindings.
* tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: dts: ti: omap: Fix OPP table node names
arm: dts: ti: omap: am5729-beagleboneai: Drop the OPP
arm: dts: ti: omap: omap36xx: Rename opp_supply nodename
ARM: dts: ti: add missing space before {
ARM: dts: ti: split interrupts per cells
ARM: dts: Unify pinctrl-single pin group nodes for davinci
Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:53:27 +0000 (10:53 +0200)]
Merge tag 'omap-for-v6.6/dt-bindings-signed' of git://git./linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree binding changes for omaps for v6.6
Just one change to get started on SoC yaml binding changes for omaps.
* tag 'omap-for-v6.6/dt-bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
dt-bindings: omap: Partially convert omap.txt to yaml
Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:46:57 +0000 (10:46 +0200)]
Merge tag 'sunxi-dt-for-6.6-1' of https://git./linux/kernel/git/sunxi/linux into soc/dt
- Add D1 GPADC node
- Introduce support for OrangePi Zero 3 SBC
- Enable DT overlay support for Allwinner H3 boards
* tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices
arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name
arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT
riscv: dts: allwinner: d1: Add GPADC node
Link: https://lore.kernel.org/r/20230806180546.GA127039@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Fri, 4 Aug 2023 22:58:13 +0000 (16:58 -0600)]
arm64: dts: mediatek: Fix "status" values
The defined value for "status" is "disabled", not "disable".
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230804225813.12493-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:45:30 +0000 (10:45 +0200)]
Merge tag 'amlogic-arm64-dt-for-v6.6' of https://git./linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.6:
- Add initial support for A311D2
- Add AN400 board
- Add gpio_intc, power domain for C3 SoC
- Again some DT bindings fixes & cleanups
* tag 'amlogic-arm64-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: drop cooling-[min|max]-state from pwm-fan
arm64: dts: amlogic: meson-g12-common: change aobus-pinctrl node name
arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name
arm64: dts: amlogic: drop redundant status=okay in sound nodes
arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios
arm64: dts: add support for C3 power domain controller
arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs
arm64: dts: add board AN400
dt-bindings: arm: amlogic: add board AN400
arm64: dts: amlogic: minor whitespace cleanup around '='
arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree
dt-bindings: arm: amlogic: add Amlogic A311D2 bindings
Link: https://lore.kernel.org/r/d5f95654-ebcd-bd37-02f9-840e50b17e44@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:44:45 +0000 (10:44 +0200)]
Merge tag 'juno-update-6.6' of git://git./linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP update for v6.6
Just a single minor whitespace cleanup in couple of FVP device trees.
* tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804123223.3258086-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:44:02 +0000 (10:44 +0200)]
Merge tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx into soc/dt
arm64: ZynqMP DT changes for v6.6
- Describe caches
- Fix i2c gpio recovery description
- Setting up default i2c frequency
- Describe GEM TSU clock and assigned rates for SOMs
- Reserved 1MB for internal firmware usage
- Fix dwc3 IRQ description
- Describe interrupts by using macros
* tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Describe interrupts by using macros
arm64: zynqmp: Fix dwc3 usb interrupt description
arm64: zynqmp: Add memory reserved node for k26 Kria SOM board
arm64: zynqmp: Assign TSU clock frequency for GEMs
arm64: zynqmp: Setting default i2c clock frequency to 400kHz
arm64: zynqmp: Fix open drain warning on ZynqMP
arm64: zynqmp: Add L2 cache nodes
Link: https://lore.kernel.org/r/fde6d7b4-c751-219d-3ec5-04e5bad2aa17@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:43:22 +0000 (10:43 +0200)]
Merge tag 'hisi-arm32-dt-for-6.6' of https://github.com/hisilicon/linux-hisi into soc/dt
ARM: DT: HiSilicon ARM32 DT updates for v6.6
- Fix "status" values
* tag 'hisi-arm32-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: Fix "status" values
Link: https://lore.kernel.org/r/64CC9B21.70907@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:42:44 +0000 (10:42 +0200)]
Merge tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v6.6
- Miscellaneous fixes according the DTS coding style
- Correct the clocks order of the sd0 for the hi3798cv200
* tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hi3798cv200: Fix clocks order of sd0
arm64: dts: hisilicon: add missing space before {
arm64: dts: hisilicon: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/64CC99A3.5030701@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:42:15 +0000 (10:42 +0200)]
Merge tag 'microchip-dt64-6.6' of https://git./linux/kernel/git/at91/linux into soc/dt
Microchip ARM64 device tree updates for 6.6
It contains:
- one cleanup patch that removes whitespaces around '='
* tag 'microchip-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804044132.231508-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:41:37 +0000 (10:41 +0200)]
Merge tag 'at91-dt-6.6' of https://git./linux/kernel/git/at91/linux into soc/dt
AT91 device tree updates for 6.6
It contains:
- TCB timer nodes adition for at91-sama5d3_ksz9477_evb board
- device tee cleanups
* tag 'at91-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: remove duplicated entries
ARM: dts: microchip: split interrupts per cells
ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5
ARM: dts: at91: ksz9477_evb: Add missing timer nodes
ARM: dts: at91-vinco: Fix "status" values
ARM: dts: microchip: add missing space before {
ARM: dts: microchip: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804044102.231448-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Sun, 30 Jul 2023 11:15:36 +0000 (13:15 +0200)]
ARM: dts: st: spear: split interrupts per cells
Each interrupt should be in its own cell. This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230730111536.98164-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:39:59 +0000 (10:39 +0200)]
Merge tag 'renesas-dts-for-v6.6-tag1' of git://git./linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.6
- Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC,
- Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L
SMARC EVK development boards,
- Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs,
- Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC,
- Add LED support for the Spider development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: spider-cpu: Add GP LEDs
arm64: dts: renesas: r8a779f0: Add INTC-EX node
arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3
arm64: dts: renesas: r9a07g043: Add MTU3a node
ARM dts: renesas: armadillo800eva: Switch to enable-gpios
arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0
riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node
arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3
arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3
arm64: dts: renesas: Add missing space before {
ARM: dts: renesas: Add missing space before {
arm64: dts: renesas: Minor whitespace cleanup around '='
arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: r9a09g011: Add CSI nodes
arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:39:04 +0000 (10:39 +0200)]
Merge tag 'tegra-for-6.6-arm64-dt' of git://git./linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.6-rc1
The majority of this is fixes all over the place for DT schema
validation warnings. However, there are also cleanups for some things in
DT and audio support is added on IGX Orin. Jetson Orin NX and Nano also
gain a new thermal trip point to help keep the device cool at moderate
loads.
* tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (22 commits)
arm64: tegra: Add blank lines for better readability
arm64: tegra: Remove {clock,reset}-names from VIC powergate
arm64: tegra: Drop incorrect maxim,disable-etr on Smaug
arm64: tegra: Add SPI device tree nodes for Tegra234
arm64: tegra: Enable UARTA and UARTE for Orin Nano
arm64: tegra: Add UARTE device tree node on Tegra234
arm64: tegra: Adapt to LP855X bindings changes
arm64: tegra: Add PCIe and DP 3.3V supplies
arm64: tegra: Add missing reset-names for Tegra HS UART
arm64: tegra: Remove current-speed for SBSA UART
arm64: tegra: smaug: Remove reg-shift for high-speed UART
arm64: tegra: Remove dmas and dma-names for debug UART
arm64: tegra: Add 35°C trip point for Jetson Orin NX/Nano
arm64: tegra: Remove duplicate PCI nodes
arm64: tegra: Sort PCI nodes correctly on Orin
arm64: tegra: Add audio support for IGX Orin
arm64: tegra: Update CPU OPP tables
arm64: tegra: Fix HSUART for Smaug
arm64: tegra: Fix HSUART for Jetson AGX Orin
arm64: tegra: Add missing alias for NVIDIA IGX Orin
...
Link: https://lore.kernel.org/r/20230728094129.3587109-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:38:27 +0000 (10:38 +0200)]
Merge tag 'tegra-for-6.6-arm-dt' of git://git./linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.6-rc1
This contains various fixes for DT schema validation and the Pegatron
Chagall and Nexus 7 get specific compatible strings for the panels that
they use.
* tag 'tegra-for-6.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Provide specific compatible string for Nexus 7 panel
ARM: tegra: Use Hannstar HSD101PWW2 on Pegatron Chagall
ARM: tegra: Reuse I2C3 for NVEC
ARM: tegra: Add missing reset-names for Tegra HS UART
ARM: tegra: Remove reset-names for UART devices
ARM: tegra: Remove dmas and dma-names for debug UART
Link: https://lore.kernel.org/r/20230728094129.3587109-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:37:10 +0000 (10:37 +0200)]
Merge tag 'tegra-for-6.6-dt-bindings' of git://git./linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.6-rc1
A number of Tegra-specific bindings are converted to json-schema and the
reserved-memory and BPMP bindings get support for Tegra264.
* tag 'tegra-for-6.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: firmware: Add support for tegra186-bpmp DRAM MRQ GSCs
dt-bindings: reserved-memory: Add support for DRAM MRQ GSCs
dt-bindings: thermal: tegra: Convert to json-schema
dt-bindings: arm: tegra: nvec: Convert to json-schema
dt-bindings: clock: tegra: Document Tegra132 compatible
dt-bindings: cpu: Document NVIDIA Tegra186 CCPLEX cluster
dt-bindings: serial: tegra-hsuart: Convert to json-schema
dt-bindings: arm: tegra: ahb: Convert to json-schema
dt-bindings: arm: tegra: flowctrl: Convert to json-schema
Link: https://lore.kernel.org/r/20230728094129.3587109-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Dylan Hung [Wed, 9 Aug 2023 13:44:13 +0000 (21:44 +0800)]
ARM: dts: aspeed: Add AST2600 I3C control pins
Add pinctrl support for the I3C1 and I3C2 pins.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230809134413.3614535-1-dylan_hung@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Wed, 9 Aug 2023 07:49:21 +0000 (17:19 +0930)]
ARM: dts: aspeed: everest: Move common devices up
Other systems have the SoC devices listed before the FSI description.
Move them up in order to make them similar.
Link: https://lore.kernel.org/r/20230809074921.116987-6-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Eddie James [Wed, 9 Aug 2023 07:49:20 +0000 (17:19 +0930)]
ARM: dts: aspeed: everest: Reorganise FSI description
Use the P10 quad FSI CFAM description to reduce duplication and add the
I2C responders and associated engines.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809074921.116987-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Wed, 9 Aug 2023 07:49:19 +0000 (17:19 +0930)]
ARM: dts: aspeed: rainier: Reorganise FSI description
Use the P10 quad FSI CFAM description to reduce duplication.
Link: https://lore.kernel.org/r/20230809074921.116987-4-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Wed, 9 Aug 2023 07:49:18 +0000 (17:19 +0930)]
ARM: dts: aspeed: bonnell: Reorganise FSI description
Use the P10 dual FSI CFAM description to reduce duplication.
Link: https://lore.kernel.org/r/20230809074921.116987-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Eddie James [Wed, 9 Aug 2023 07:49:17 +0000 (17:19 +0930)]
ARM: dts: aspeed: Add P10 FSI descriptions
These will be used by BMCs attached to a IBM Power10 server CPU.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809074921.116987-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Delphine CC Chiu [Thu, 10 Aug 2023 07:00:30 +0000 (15:00 +0800)]
ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC
Add linux device tree entry for Yosemite 4 devices connected to BMC.
The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810070032.335161-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Delphine CC Chiu [Thu, 10 Aug 2023 07:00:29 +0000 (15:00 +0800)]
dt-bindings: arm: aspeed: add Facebook Yosemite 4 board
Document the new compatibles used on Facebook Yosemite 4.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810070032.335161-2-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tao Ren [Thu, 3 Aug 2023 23:03:24 +0000 (16:03 -0700)]
ARM: dts: aspeed: wedge400: Set eMMC max frequency
Set eMMC max frequency to 25MHz to prevent intermittent eMMC access
failures.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-4-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tao Ren [Thu, 3 Aug 2023 23:03:23 +0000 (16:03 -0700)]
ARM: dts: aspeed: wedge400: Enable more ADC channels
Enable ASPEED-ADC channels 5-8 to support voltage monitoring of all the
Wedge400 hardware revisions.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-3-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tao Ren [Thu, 3 Aug 2023 23:03:22 +0000 (16:03 -0700)]
ARM: dts: aspeed: Update spi alias in Facebook AST2500 Common dtsi
Set FMC controller to "spi0" in ast2500-facebook-netbmc-common.dtsi so
the spi bus is consistent with the flash labels defined in flash layout.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-2-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Lakshmi Yadlapati [Tue, 25 Jul 2023 14:16:06 +0000 (09:16 -0500)]
ARM: dts: aspeed: rainier: Remove TPM device
TPM is disabled in Rainier, remove TPM device.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20230725141606.1641080-2-lakshmiy@us.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Tue, 20 Jun 2023 04:22:57 +0000 (13:52 +0930)]
ARM: dts: aspeed: Add AST2600 VUARTs
The AST2600 has two more vuarts, placed between the existing two in the
memory map.
Link: https://lore.kernel.org/r/20230620042257.73665-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Chanh Nguyen [Tue, 20 Jun 2023 09:25:37 +0000 (16:25 +0700)]
ARM: dts: aspeed: mtmitchell: Add MCTP
Enable MCTP driver on I2C3 bus for MCTP transaction
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230620092537.20007-4-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Chanh Nguyen [Tue, 20 Jun 2023 09:25:36 +0000 (16:25 +0700)]
ARM: dts: aspeed: mtmitchell: Update ADC sensors for Mt.Mitchell DVT systems
Change to use I2C ADC controller (ltc2497) for Mt.Mitchell DVT and
later hardware.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230620092537.20007-3-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Chanh Nguyen [Tue, 20 Jun 2023 09:25:35 +0000 (16:25 +0700)]
ARM: dts: aspeed: mtmitchell: Enable the BMC UART8 and UART9
The BMC UART8 and UART9 were connected to the Secpro and Mpro console
of socket S1 on the Mt.Mitchell system.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230620092537.20007-2-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Krzysztof Kozlowski [Mon, 31 Jul 2023 09:08:21 +0000 (11:08 +0200)]
arm64: dts: exynos: exynos5433-tm2: drop redundant status=okay
status=okay is by default.
Link: https://lore.kernel.org/r/20230731090821.104733-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Felix Moessbauer [Tue, 27 Jun 2023 13:37:03 +0000 (21:37 +0800)]
arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices
Add the '-@' DTC option for the sun8i-h3 pi-class devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.
These devices allow various modules to be connected and this enables
users to create out-of-tree device-tree overlays for these modules.
Please note that this change does increase the size of the resulting DTB
by ~30%. For example, with v6.4 increase in size is as follows:
22909 -> 29564 sun8i-h3-orangepi-lite.dtb
24214 -> 30935 sun8i-h3-bananapi-m2-plus.dtb
23915 -> 30664 sun8i-h3-nanopi-m1-plus.dtb
22969 -> 29537 sun8i-h3-nanopi-m1.dtb
24157 -> 30836 sun8i-h3-nanopi-duo2.dtb
24110 -> 30845 sun8i-h3-orangepi-plus2e.dtb
23472 -> 30037 sun8i-h3-orangepi-one.dtb
24600 -> 31410 sun8i-h3-orangepi-plus.dtb
23618 -> 30230 sun8i-h3-orangepi-2.dtb
22170 -> 28548 sun8i-h3-orangepi-zero-plus2.dtb
23258 -> 29795 sun8i-h3-nanopi-neo-air.dtb
23113 -> 29699 sun8i-h3-zeropi.dtb
22803 -> 29270 sun8i-h3-nanopi-neo.dtb
24674 -> 31318 sun8i-h3-nanopi-r1.dtb
23477 -> 30038 sun8i-h3-orangepi-pc.dtb
24622 -> 31380 sun8i-h3-bananapi-m2-plus-v1.2.dtb
23750 -> 30366 sun8i-h3-orangepi-pc-plus.dtb
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230627133703.355893-1-felix.moessbauer@siemens.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Fri, 4 Aug 2023 17:08:56 +0000 (18:08 +0100)]
arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC,
which seems to be just an H616 with more L2 cache. The board itself is a
slightly updated version of the Orange Pi Zero 2. It features:
- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
- 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2)
- AXP313a PMIC (more capable AXP305 on the Zero2)
- Raspberry-Pi-1 compatible GPIO header
- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports
- 1 USB 2.0 host port
- 1 USB 2.0 type C port (power supply + OTG)
- MicroSD slot
- on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2)
- 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2)
- micro-HDMI port
- (yet) unsupported Allwinner WiFi/BT chip
Add the devicetree file describing the currently supported features,
namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at
the moment, though the basic functionality works.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Fri, 4 Aug 2023 17:08:55 +0000 (18:08 +0100)]
dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name
The Orange Pi Zero 3 board is an updated version of the Zero 2 board.
It uses a SoC called H618, which just seems to be an H616 with more L2
cache.
Add the board/SoC compatible string pair to the list of known boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230804170856.1237202-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Andre Przywara [Fri, 4 Aug 2023 17:08:54 +0000 (18:08 +0100)]
arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT
The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some
DT nodes with the Zero 2, but comes with a different PMIC.
Move the common parts (except the PMIC) into a new shared file, and
include that from the existing board .dts file.
No functional change, the generated DTB is the same, except for some
phandle numbering differences.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Claudiu Beznea [Fri, 21 Jul 2023 05:39:18 +0000 (08:39 +0300)]
ARM: dts: at91: remove duplicated entries
Remove duplicated DTC_FLAGS_<board> := -@ entries which intends to enable
the building of device tree overlays.
Commit
724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
added those entries at the beginning of file w/o removing the already
available entries spread though file.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230721053918.33944-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
David Yang [Sun, 14 May 2023 12:25:33 +0000 (20:25 +0800)]
arm64: dts: hi3798cv200: Fix clocks order of sd0
"ciu" and "biu" were incorrectly swapped. Fix their order.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Krzysztof Kozlowski [Sun, 30 Jul 2023 11:15:41 +0000 (13:15 +0200)]
ARM: dts: microchip: split interrupts per cells
Each interrupt should be in its own cell. This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730111542.98238-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Neil Armstrong [Thu, 6 Jul 2023 08:00:21 +0000 (10:00 +0200)]
arm64: dts: amlogic: drop cooling-[min|max]-state from pwm-fan
Drop the invalid cooling-min-state & cooling-max-state from the
pwm-fan node defined in the bananapi dtsi and odroid-hc4 DT.
Link: https://lore.kernel.org/r/20230706-topic-amlogic-upstream-dt-fixes-take3-v1-3-63ed070eeab2@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Neil Armstrong [Thu, 6 Jul 2023 08:00:20 +0000 (10:00 +0200)]
arm64: dts: amlogic: meson-g12-common: change aobus-pinctrl node name
Bindings expects name to be "pinctrl", fix it.
Link: https://lore.kernel.org/r/20230706-topic-amlogic-upstream-dt-fixes-take3-v1-2-63ed070eeab2@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Neil Armstrong [Thu, 6 Jul 2023 08:00:19 +0000 (10:00 +0200)]
arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name
This fixes the following dtschema check error:
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb: pinctrl@40: bank@40: Unevaluated properties are not allowed ('hog-0' was unexpected)
Link: https://lore.kernel.org/r/20230706-topic-amlogic-upstream-dt-fixes-take3-v1-1-63ed070eeab2@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Krzysztof Kozlowski [Mon, 31 Jul 2023 09:36:15 +0000 (11:36 +0200)]
arm64: dts: amlogic: drop redundant status=okay in sound nodes
status=okay is by default.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230731093615.148949-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Krzysztof Kozlowski [Tue, 25 Jul 2023 14:27:03 +0000 (16:27 +0200)]
arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios
The recommended name for enable GPIOs property in regulator-gpio is
enable-gpios. This is also required by bindings:
meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230725142703.157547-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Xianwei Zhao [Fri, 7 Jul 2023 00:37:10 +0000 (08:37 +0800)]
arm64: dts: add support for C3 power domain controller
Enable power domain controller for Amlogic C3 SoC
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230707003710.2667989-5-xianwei.zhao@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Huqiang Qin [Thu, 20 Jul 2023 11:46:39 +0000 (19:46 +0800)]
arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs
Add gpio interrupt controller device and pinctrl device.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230720114639.833436-1-huqiang.qin@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Xianwei Zhao [Thu, 6 Jul 2023 09:19:53 +0000 (17:19 +0800)]
arm64: dts: add board AN400
Add devicetrees support for Amlogic AN400 board based T7 SoC.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20230706091954.3301224-3-xianwei.zhao@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Xianwei Zhao [Thu, 6 Jul 2023 09:19:52 +0000 (17:19 +0800)]
dt-bindings: arm: amlogic: add board AN400
Add the board AN400 tree bindings based Amloigc T7 SoC.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230706091954.3301224-2-xianwei.zhao@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Krzysztof Kozlowski [Sun, 2 Jul 2023 18:53:27 +0000 (20:53 +0200)]
arm64: dts: amlogic: minor whitespace cleanup around '='
Use space after '=' sign to match DTS coding style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230702185327.44625-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Lucas Tanure [Thu, 29 Jun 2023 07:34:19 +0000 (08:34 +0100)]
arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree
The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
family, on a board with the same form factor as the VIM3 models.
- 8GB LPDDR4X 2016MHz
- 32GB eMMC 5.1 storage
- 32MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
- HDMI 2.1 video
- HDMI Input
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot
Signed-off-by: Lucas Tanure <tanure@linux.com>
Link: https://lore.kernel.org/r/20230629073419.207886-5-tanure@linux.com
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Lucas Tanure [Thu, 29 Jun 2023 07:34:16 +0000 (08:34 +0100)]
dt-bindings: arm: amlogic: add Amlogic A311D2 bindings
Add bindings for the Khadas Vim4 board, using A311D2 Soc from Amlogic T7
family chip.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230629073419.207886-2-tanure@linux.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Nishanth Menon [Mon, 24 Jul 2023 15:39:09 +0000 (10:39 -0500)]
arm: dts: ti: omap: Fix OPP table node names
Fix the opp table node names for opps to be compliant with bindings.
Signed-off-by: Nishanth Menon <nm@ti.com>
Message-ID: <
20230724153911.1376830-4-nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Nishanth Menon [Mon, 24 Jul 2023 15:39:08 +0000 (10:39 -0500)]
arm: dts: ti: omap: am5729-beagleboneai: Drop the OPP
opp_slow is not defined in the table in dra7 or derivatives, drop the
definition.
Signed-off-by: Nishanth Menon <nm@ti.com>
Message-ID: <
20230724153911.1376830-3-nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Nishanth Menon [Mon, 24 Jul 2023 15:39:07 +0000 (10:39 -0500)]
arm: dts: ti: omap: omap36xx: Rename opp_supply nodename
Use opp-supply as the proper node name.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <
20230724153911.1376830-2-nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Krzysztof Kozlowski [Wed, 5 Jul 2023 14:57:54 +0000 (16:57 +0200)]
ARM: dts: ti: add missing space before {
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <
20230705145755.292927-1-krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Krzysztof Kozlowski [Sun, 30 Jul 2023 11:15:33 +0000 (13:15 +0200)]
ARM: dts: ti: split interrupts per cells
Each interrupt should be in its own cell. This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <
20230730111533.98136-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Tue, 23 May 2023 09:04:04 +0000 (12:04 +0300)]
ARM: dts: Unify pinctrl-single pin group nodes for davinci
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: David Lechner <david@lechnology.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Message-ID: <
20230523090406.59632-1-tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Andrew Davis [Mon, 15 May 2023 07:45:11 +0000 (09:45 +0200)]
dt-bindings: omap: Partially convert omap.txt to yaml
Convert omap.txt to yaml.
CC: linux-omap@vger.kernel.org
Signed-off-by: Andrew Davis <afd@ti.com>
[reduced to only OMAP3/4/5 and AM3, adding Epson Moverio BT-200]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <
20230515074512.66226-2-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Lukasz Majewski [Thu, 27 Jul 2023 08:06:56 +0000 (10:06 +0200)]
ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5
Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows
following device warning:
'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"'
This is not critical, as KSZ driver by itself assigns default value of
tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode).
However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps'
has been specified with the default value of 2000 ps.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20230727080656.3828397-1-lukma@denx.de
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Lukasz Majewski [Wed, 12 Jul 2023 15:21:11 +0000 (17:21 +0200)]
ARM: dts: at91: ksz9477_evb: Add missing timer nodes
Without this change the KSZ9477-EVB board hangs just after passing
execution flow from u-boot to Linux kernel.
This code has been copied from at91-sama5d3_xplained.dts.
Test setup: Linux 6.5-rc1
Config: arch/arm/configs/sama5_defconfig
Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20230712152111.3756211-1-lukma@denx.de
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Rob Herring [Mon, 26 Jun 2023 22:10:10 +0000 (16:10 -0600)]
ARM: dts: at91-vinco: Fix "status" values
The defined value for "status" is "disabled", not "disable".
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230626221010.3946263-1-robh@kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Maksim Kiselev [Mon, 19 Jun 2023 15:42:27 +0000 (18:42 +0300)]
riscv: dts: allwinner: d1: Add GPADC node
This patch adds declaration of the general purpose ADC for D1
and T113s SoCs.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230619154252.3951913-5-bigunclemax@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Krzysztof Kozlowski [Sun, 2 Jul 2023 18:51:07 +0000 (20:51 +0200)]
arm64: dts: microchip: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230702185108.43959-1-krzysztof.kozlowski@linaro.org
[claudiu.beznea: added link]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Krzysztof Kozlowski [Wed, 5 Jul 2023 15:00:58 +0000 (17:00 +0200)]
ARM: dts: microchip: add missing space before {
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230705150058.293942-1-krzysztof.kozlowski@linaro.org
[claudiu.beznea: added link]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Krzysztof Kozlowski [Sun, 2 Jul 2023 18:51:08 +0000 (20:51 +0200)]
ARM: dts: microchip: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230702185108.43959-1-krzysztof.kozlowski@linaro.org
[claudiu.beznea: added link]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Thierry Reding [Wed, 26 Jul 2023 18:50:10 +0000 (20:50 +0200)]
ARM: tegra: Provide specific compatible string for Nexus 7 panel
panel-lvds alone is not a valid compatible string and we always need a
specific compatible string as well. Nexus 7 can come with one of (at
least) two panels, so pick one of them as the specific compatible
string.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 26 Jul 2023 18:48:57 +0000 (20:48 +0200)]
ARM: tegra: Use Hannstar HSD101PWW2 on Pegatron Chagall
The LVDS bindings require a specific compatible string in addition to
the generic "panel-lvds". Add the HannStar HSD101PWW2 which is used on
a similar device (ASUS TF201) and seems to work fine with slightly
modified timings in DT.
Suggested-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 26 Jul 2023 16:30:08 +0000 (18:30 +0200)]
ARM: tegra: Reuse I2C3 for NVEC
Instead of duplicating the I2C3 node and adding NVEC specific
properties, reuse the I2C3 node, extend it with NVEC specific properties
and drop properties that are not needed by NVEC. This results in a DTB
that is a bit cleaner and avoids accidentally using I2C3 and NVEC which
would have them fight over the same hardware resources.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 26 Jul 2023 18:25:32 +0000 (20:25 +0200)]
arm64: tegra: Add blank lines for better readability
Add a few blank lines to visually separate blocks in the Jetson AGX Orin
device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Wed, 26 Jul 2023 16:43:18 +0000 (18:43 +0200)]
arm64: tegra: Remove {clock,reset}-names from VIC powergate
According to the device tree bindings, the powergate definition nodes
don't contain clock-names and reset-names properties, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Krzysztof Kozlowski [Tue, 25 Jul 2023 14:26:38 +0000 (16:26 +0200)]
arm64: tegra: Drop incorrect maxim,disable-etr on Smaug
There is no "maxim,disable-etr" property (but there is
maxim,enable-etr), neither in the bindings nor in the Linux driver:
tegra210-smaug.dtb: regulator@1c: Unevaluated properties are not allowed ('maxim,disable-etr' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Gautham Srinivasan [Fri, 21 Jul 2023 16:10:50 +0000 (16:10 +0000)]
arm64: tegra: Add SPI device tree nodes for Tegra234
Create the device tree nodes for the SPI1, SPI2 and SPI3 controllers
found on Tegra234.
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Gautham Srinivasan [Fri, 21 Jul 2023 16:06:37 +0000 (16:06 +0000)]
arm64: tegra: Enable UARTA and UARTE for Orin Nano
Activate UARTA and UARTE functionalities for Orin Nano.
- UARTA is accessible via the 40-pin header with pin 8 and 10 (TX/RX)
- UARTE utilizes the M2.E connector
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Gautham Srinivasan [Fri, 21 Jul 2023 16:06:36 +0000 (16:06 +0000)]
arm64: tegra: Add UARTE device tree node on Tegra234
This commit adds the device tree node for UARTE on Tegra234.
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Geert Uytterhoeven [Thu, 27 Jul 2023 08:38:35 +0000 (10:38 +0200)]
arm64: dts: renesas: spider-cpu: Add GP LEDs
Describe the two General Purpose LEDs LED7 and LED8 on the Spider CPU
board, so they can be used as indicator LEDs.
Note that General Purpose LEDs LED9 to LED11 are not added, as they are
connected to GPIO block 4, which can only be accessed from the Control
Domain.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/fdaf6c700b624851039a60733c7f73a413c6d2c5.1690447094.git.geert+renesas@glider.be
Geert Uytterhoeven [Thu, 27 Jul 2023 08:38:02 +0000 (10:38 +0200)]
arm64: dts: renesas: r8a779f0: Add INTC-EX node
Add the device node for the Interrupt Controller for External Devices
(INTC-EX) on the Renesas R-Car S4-8 (R8A779F0) SoC, which serves
external IRQ pins IRQ[0-5].
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/8f5612c0353b8c90f98366978563340d93c7ae58.1690447013.git.geert+renesas@glider.be
Biju Das [Thu, 27 Jul 2023 08:18:48 +0000 (09:18 +0100)]
arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3
Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/G2UL SMARC
EVK.
The MTU3a PWM pins on PMOD0 are muxed with SPI1. Disable SPI1, when
PMOD_MTU3 macro is enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230727081848.100834-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Biju Das [Thu, 27 Jul 2023 08:18:47 +0000 (09:18 +0100)]
arm64: dts: renesas: r9a07g043: Add MTU3a node
Add MTU3a node to R9A07G043 (RZ/{G2UL,Five}) SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230727081848.100834-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Krzysztof Kozlowski [Wed, 26 Jul 2023 07:02:41 +0000 (09:02 +0200)]
ARM dts: renesas: armadillo800eva: Switch to enable-gpios
The recommended name for enable GPIOs property in regulator-gpio is
"enable-gpios". This is also required by bindings:
r8a7740-armadillo800eva.dtb: regulator-vccq-sdhi0: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230726070241.103545-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Michal Simek [Mon, 10 Jul 2023 10:52:19 +0000 (12:52 +0200)]
arm64: zynqmp: Describe interrupts by using macros
Use arm-gic.h and irq.h for interrupt description. It helps to improve
readability of device tree file.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9d5bd17f37772be186cab17b06cc21351d36ff62.1688986332.git.michal.simek@amd.com
Artur Weber [Fri, 19 May 2023 18:07:28 +0000 (20:07 +0200)]
arm64: tegra: Adapt to LP855X bindings changes
Change underscores in ROM node names to dashes, and remove deprecated
pwm-period property.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Shubhi Garg [Wed, 31 May 2023 08:50:52 +0000 (08:50 +0000)]
arm64: tegra: Add PCIe and DP 3.3V supplies
Add the 3.3V supplies for PCIe C1 controller and Display Port controller
for the NVIDIA IGX Orin platform.
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 17 Jul 2023 16:32:13 +0000 (18:32 +0200)]
arm64: tegra: Add missing reset-names for Tegra HS UART
The device tree bindings for the Tegra high-speed UART require the
reset-names property, so add it whenever the compatible string for the
serial port is overwritten.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 17 Jul 2023 16:32:12 +0000 (18:32 +0200)]
arm64: tegra: Remove current-speed for SBSA UART
The SBSA UART device tree bindings don't define a current-speed
property, so remove it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 17 Jul 2023 16:32:11 +0000 (18:32 +0200)]
arm64: tegra: smaug: Remove reg-shift for high-speed UART
The device tree bindings for the high-speed UART don't define a
reg-shift property, so delete it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 17 Jul 2023 16:32:10 +0000 (18:32 +0200)]
arm64: tegra: Remove dmas and dma-names for debug UART
The debug UART doesn't support DMA and the DT bindings prohibit the use
of the dmas and dma-names properties for it, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 17 Jul 2023 16:30:37 +0000 (18:30 +0200)]
arm64: tegra: Add 35°C trip point for Jetson Orin NX/Nano
It turns out that these devices can get quite hot to the touch with the
standard cooling configuration, so add another trip point at 35°C along
with a cooling map to help keep the system reasonably cool at very low
system load.
Reviewed-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 20 Jul 2023 16:45:49 +0000 (18:45 +0200)]
arm64: tegra: Remove duplicate PCI nodes
The PCI nodes for Jetson Orin NX are already defined at the carrier
board level, so the duplicates can be dropped at the platform level.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Thu, 20 Jul 2023 16:44:49 +0000 (18:44 +0200)]
arm64: tegra: Sort PCI nodes correctly on Orin
Recent changes to several Orin boards didn't order some device tree
nodes correctly. Resort them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mohan Kumar [Tue, 20 Jun 2023 15:58:47 +0000 (21:28 +0530)]
arm64: tegra: Add audio support for IGX Orin
Add audio support for the NVIDIA IGX Orin development kit having P3701
module with P3740 carrier board.
Move the common device-tree nodes to a new file tegra234-p3701.dtsi and
use this for Jetson AGX Orin and NVIDIA IGX Orin platforms
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
[treding@nvidia.com: properly sort nodes]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Peter De Schrijver [Mon, 29 May 2023 13:50:49 +0000 (16:50 +0300)]
dt-bindings: firmware: Add support for tegra186-bpmp DRAM MRQ GSCs
Add memory-region property to the tegra186-bpmp binding to support
DRAM MRQ GSCs.
Co-developed-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>