dm zoned: check zone capacity

commit bab68499428ed934f0493ac74197ed6f36204260 upstream.

The dm-zoned target cannot support zoned block devices with zones that
have a capacity smaller than the zone size (e.g. NVMe zoned namespaces)
due to the current chunk zone mapping implementation as it is assumed
that zones and chunks have the same size with all blocks usable.
If a zoned drive is found to have zones with a capacity different from
the zone size, fail the target initialization.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer()

commit 5fae8a946ac2df879caf3f79a193d4766d00239b upstream.

commit 6f755e85c332 ("coresight: Add helper for inserting synchronization
packets") removed trailing '\0' from barrier_pkt array and updated the
call sites like etb_update_buffer() to have proper checks for barrier_pkt
size before read but missed updating tmc_update_etf_buffer() which still
reads barrier_pkt past the array size resulting in KASAN out-of-bounds
bug. Fix this by adding a check for barrier_pkt size before accessing
like it is done in etb_update_buffer().

 BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698
 Read of size 4 at addr ffffffd05b7d1030 by task perf/2629

 Call trace:
  dump_backtrace+0x0/0x27c
  show_stack+0x20/0x2c
  dump_stack+0x11c/0x188
  print_address_description+0x3c/0x4a4
  __kasan_report+0x140/0x164
  kasan_report+0x10/0x18
  __asan_report_load4_noabort+0x1c/0x24
  tmc_update_etf_buffer+0x4b8/0x698
  etm_event_stop+0x248/0x2d8
  etm_event_del+0x20/0x2c
  event_sched_out+0x214/0x6f0
  group_sched_out+0xd0/0x270
  ctx_sched_out+0x2ec/0x518
  __perf_event_task_sched_out+0x4fc/0xe6c
  __schedule+0x1094/0x16a0
  preempt_schedule_irq+0x88/0x170
  arm64_preempt_schedule_irq+0xf0/0x18c
  el1_irq+0xe8/0x180
  perf_event_exec+0x4d8/0x56c
  setup_new_exec+0x204/0x400
  load_elf_binary+0x72c/0x18c0
  search_binary_handler+0x13c/0x420
  load_script+0x500/0x6c4
  search_binary_handler+0x13c/0x420
  exec_binprm+0x118/0x654
  __do_execve_file+0x77c/0xba4
  __arm64_compat_sys_execve+0x98/0xac
  el0_svc_common+0x1f8/0x5e0
  el0_svc_compat_handler+0x84/0xb0
  el0_svc_compat+0x10/0x50

 The buggy address belongs to the variable:
  barrier_pkt+0x10/0x40

 Memory state around the buggy address:
  ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
  ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03
                                      ^
  ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa
  ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa
 ==================================================================

Link: https://lore.kernel.org/r/20210505093430.18445-1-saiprakash.ranjan@codeaurora.org
Fixes: 0c3fc4d5fa26 ("coresight: Add barrier packet for synchronisation")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210614175901.532683-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: Propagate symlink failure

commit 51dd19a7e9f8fbbb7cd92b8a357091911eae7f78 upstream.

If the symlink is unable to be created, the driver goes
ahead and continues device creation. Instead lets propagate
the failure, and fail the probe.

Link: https://lore.kernel.org/r/20210526204042.2681700-1-jeremy.linton@arm.com
Fixes: 8a7365c2d418 ("coresight: Expose device connections via sysfs")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210614175901.532683-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe

commit 9272e5d0028d45a3b45b58c9255e6e0df53f7ad9 upstream.

In the out_err_bus_register error branch of tpci200_pci_probe,
tpci200->info->cfg_regs is freed by tpci200_uninstall()->
tpci200_unregister()->pci_iounmap(..,tpci200->info->cfg_regs)
in the first time.

But later, iounmap() is called to free tpci200->info->cfg_regs
again.

My patch sets tpci200->info->cfg_regs to NULL after tpci200_uninstall()
to avoid the double free.

Fixes: cea2f7cdff2af ("Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode")
Cc: stable <stable@vger.kernel.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210524093205.8333-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT

commit 4030a6e6a6a4a42ff8c18414c9e0c93e24cc70b8 upstream.

Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that
on systems where pid_max is configured higher than PID_MAX_DEFAULT the
ftrace record-tgid option doesn't work so well. Any tasks with PIDs
higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and
don't show up in the saved_tgids file.

In particular since systemd v243 & above configure pid_max to its
highest possible 1<<22 value by default on 64 bit systems this renders
the record-tgids option of little use.

Increase the size of tgid_map to the configured pid_max instead,
allowing it to cover the full range of PIDs up to the maximum value of
PID_MAX_LIMIT if the system is configured that way.

On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the
size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in
memory overhead sounds significant 64 bit systems are presumably best
placed to accommodate it, and since tgid_map is only allocated when the
record-tgid option is actually used presumably the user would rather it
spends sufficient memory to actually record the tgids they expect.

The size of tgid_map could also increase for CONFIG_BASE_SMALL=y
configurations, but these seem unlikely to be systems upon which people
are both configuring a large pid_max and running ftrace with record-tgid
anyway.

Of note is that we only allocate tgid_map once, the first time that the
record-tgid option is enabled. Therefore its size is only set once, to
the value of pid_max at the time the record-tgid option is first
enabled. If a user increases pid_max after that point, the saved_tgids
file will not contain entries for any tasks with pids beyond the earlier
value of pid_max.

Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
[ Fixed comment coding style ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Simplify & fix saved_tgids logic

commit b81b3e959adb107cd5b36c7dc5ba1364bbd31eb2 upstream.

The tgid_map array records a mapping from pid to tgid, where the index
of an entry within the array is the pid & the value stored at that index
is the tgid.

The saved_tgids_next() function iterates over pointers into the tgid_map
array & dereferences the pointers which results in the tgid, but then it
passes that dereferenced value to trace_find_tgid() which treats it as a
pid & does a further lookup within the tgid_map array. It seems likely
that the intent here was to skip over entries in tgid_map for which the
recorded tgid is zero, but instead we end up skipping over entries for
which the thread group leader hasn't yet had its own tgid recorded in
tgid_map.

A minimal fix would be to remove the call to trace_find_tgid, turning:

  if (trace_find_tgid(*ptr))

into:

  if (*ptr)

..but it seems like this logic can be much simpler if we simply let
seq_read() iterate over the whole tgid_map array & filter out empty
entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that
approach, removing the incorrect logic here entirely.

Link: https://lkml.kernel.org/r/20210630003406.4013668-1-paulburton@google.com
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rq-qos: fix missed wake-ups in rq_qos_throttle try two

commit 11c7aa0ddea8611007768d3e6b58d45dc60a19e1 upstream.

Commit 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle")
tried to fix a problem that a process could be sleeping in rq_qos_wait()
without anyone to wake it up. However the fix is not complete and the
following can still happen:

CPU1 (waiter1) CPU2 (waiter2) CPU3 (waker)
rq_qos_wait() rq_qos_wait()
  acquire_inflight_cb() -> fails
  acquire_inflight_cb() -> fails

completes IOs, inflight
  decreased
  prepare_to_wait_exclusive()
  prepare_to_wait_exclusive()
  has_sleeper = !wq_has_single_sleeper() -> true as there are two sleepers
  has_sleeper = !wq_has_single_sleeper() -> true
  io_schedule()   io_schedule()

Deadlock as now there's nobody to wakeup the two waiters. The logic
automatically blocking when there are already sleepers is really subtle
and the only way to make it work reliably is that we check whether there
are some waiters in the queue when adding ourselves there. That way, we
are guaranteed that at least the first process to enter the wait queue
will recheck the waiting condition before going to sleep and thus
guarantee forward progress.

Fixes: 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210607112613.25344-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seq_buf: Fix overflow in seq_buf_putmem_hex()

commit d3b16034a24a112bb83aeb669ac5b9b01f744bb7 upstream.

There's two variables being increased in that loop (i and j), and i
follows the raw data, and j follows what is being written into the buffer.
We should compare 'i' to MAX_MEMHEX_BYTES or compare 'j' to HEX_CHARS.
Otherwise, if 'j' goes bigger than HEX_CHARS, it will overflow the
destination buffer.

Link: https://lore.kernel.org/lkml/20210625122453.5e2fe304@oasis.local.home/
Link: https://lkml.kernel.org/r/20210626032156.47889-1-yun.zhou@windriver.com
Cc: stable@vger.kernel.org
Fixes: 5e3ca0ec76fce ("ftrace: introduce the "hex" output method")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

extcon: intel-mrfld: Sync hardware and software state on init

commit ecb5bdff901139850fb3ca3ae2d0cccac045bc52 upstream.

extcon driver for Basin Cove PMIC shadows the switch status used for dwc3
DRD to detect a change in the switch position. This change initializes the
status at probe time.

Cc: stable@vger.kernel.org
Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/lkdtm: Fix expected text for CR4 pinning

commit c2eb472bbe25b3f360990f23b293b3fbadfa4bc0 upstream.

The error text for CR4 pinning changed. Update the test to match.

Fixes: a13b9d0b9721 ("x86/cpu: Use pinning mask for CR4 bits needing to be 0")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE

commit a15676ac8f24a9ac5fd881cf17be4be13fa0910a upstream.

When built under CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, this test is
expected to fail (i.e. not trip an exception).

Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: add a missing of_node_put

commit 63879e2964bceee2aa5bbe8b99ea58bba28bb64f upstream.

'for_each_child_of_node' performs an of_node_get on each iteration, so a
return from the middle of the loop requires an of_node_put.

Fixes: e888d445ac33 ("nvmem: resolve cells from DT at registration time")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611102321.11509-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: syscon: Free the allocated name field of struct regmap_config

commit 56a1188159cb2b87fbcb5a7a7afb38a4dd9db0c1 upstream.

The commit 529a1101212a("mfd: syscon: Don't free allocated name
for regmap_config") doesn't free the allocated name field of struct
regmap_config, but introduce a memory leak. There is another
commit 94cc89eb8fa5("regmap: debugfs: Fix handling of name string
for debugfs init delays") fixing this debugfs init issue from root
cause. With this fixing, the name field in struct regmap_debugfs_node
is removed. When initialize debugfs for syscon driver, the name
field of struct regmap_config is not used anymore. So, the allocated
name field of struct regmap_config is need to be freed directly after
regmap initialization to avoid memory leak.

Cc: stable@vger.kernel.org
Fixes: 529a1101212a("mfd: syscon: Don't free allocated name for regmap_config")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: ab8500: Fix an old bug

commit f1c74a6c07e76fcb31a4bcc1f437c4361a2674ce upstream.

Trying to get the AB8500 charging driver working I ran into a bit
of bitrot: we haven't used the driver for a while so errors in
refactorings won't be noticed.

This one is pretty self evident: use argument to the macro or we
end up with a random pointer to something else.

Cc: stable@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marcus Cooper <codekipper@gmail.com>
Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: Fix races between xattr_{set|get} and listxattr operations

commit f4e3634a3b642225a530c292fdb1e8a4007507f5 upstream.

UBIFS may occur some problems with concurrent xattr_{set|get} and
listxattr operations, such as assertion failure, memory corruption,
stale xattr value[1].

Fix it by importing a new rw-lock in @ubifs_inode to serilize write
operations on xattr, concurrent read operations are still effective,
just like ext4.

[1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com

Fixes: 1e51764a3c2ac05a23 ("UBIFS: add new flash file system")
Cc: stable@vger.kernel.org # v2.6+
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal/drivers/int340x/processor_thermal: Fix tcc setting

commit fe6a6de6692e7f7159c1ff42b07ecd737df712b4 upstream.

The following fixes are done for tcc sysfs interface:
- TCC is 6 bits only from bit 29-24
- TCC of 0 is valid
- When BIT(31) is set, this register is read only
- Check for invalid tcc value
- Error for negative values

Fixes: fdf4f2fb8e899 ("drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210628215803.75038-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi/watchdog: Stop watchdog timer when the current action is 'none'

commit 2253042d86f57d90a621ac2513a7a7a13afcf809 upstream.

When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.

For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.

The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute

commit fca41af18e10318e4de090db47d9fa7169e1bf2f upstream.

fw_cfg_showrev() is called by an indirect call in kobj_attr_show(),
which violates clang's CFI checking because fw_cfg_showrev()'s second
parameter is 'struct attribute', whereas the ->show() member of 'struct
kobj_structure' expects the second parameter to be of type 'struct
kobj_attribute'.

$ cat /sys/firmware/qemu_fw_cfg/rev
3

$ dmesg | grep "CFI failure"
[   26.016832] CFI failure (target: fw_cfg_showrev+0x0/0x8):

Fix this by converting fw_cfg_rev_attr to 'struct kobj_attribute' where
this would have been caught automatically by the incompatible pointer
types compiler warning. Update fw_cfg_showrev() accordingly.

Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Link: https://github.com/ClangBuiltLinux/linux/issues/1299
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210211194258.4137998-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: fix PTP on 5Gb links

commit 26b0ce8dd3dd704393dbace4dc416adfeffe531f upstream.

As reported by Alex Sergeev, the i40e driver is incrementing the PTP
clock at 40Gb speeds when linked at 5Gb. Fix this bug by making
sure that the right multiplier is selected when linked at 5Gb.

Fixes: 3dbdd6c2f70a ("i40e: Add support for 5Gbps cards")
Cc: stable@vger.kernel.org
Reported-by: Alex Sergeev <asergeev@carbonrobotics.com>
Suggested-by: Alex Sergeev <asergeev@carbonrobotics.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tegra: Set driver_name=tegra for all machine drivers

commit f6eb84fa596abf28959fc7e0b626f925eb1196c7 upstream.

The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise
Tegra UCMs don't match by the path/name.

All Tegra machine drivers are specifying the card's name, but it has no
effect if model name is specified in the device-tree since it overrides
the card's name. We need to set the driver_name to "tegra" in order to
get a usable lookup path for the updated ALSA UCMs. The new UCM lookup
path has a form of driver_name/card_name.

The old lookup paths that are based on driver module name continue to
work as before. Note that UCM matching never worked for Tegra ASoC drivers
if they were compiled as built-in, this is fixed by supporting the new
naming scheme.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210529154649.25936-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fpga: stratix10-soc: Add missing fpga_mgr_free() call

commit d9ec9daa20eb8de1efe6abae78c9835ec8ed86f9 upstream.

The stratix10-soc driver uses fpga_mgr_create() function and is therefore
responsible to call fpga_mgr_free() to release the class driver resources.
Add a missing call to fpga_mgr_free in the s10_remove() function.

Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Fixes: e7eef1d7633a ("fpga: add intel stratix10 soc fpga manager driver")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210614170909.232415-3-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround

commit 8b33dfe0ba1c84c1aab2456590b38195837f1e6e upstream.

Bad counter reads are experienced sometimes when bit 10 or greater rolls
over. Originally, testing showed that at least 10 lower bits would be
set to the same value during these bad reads. However, some users still
reported time skips.

Wider testing revealed that on some chips, occasionally only the lowest
9 bits would read as the anomalous value. During these reads (which
still happen only when bit 10), bit 9 would read as the correct value.

Reduce the mask by one bit to cover these cases as well.

Cc: stable@vger.kernel.org
Fixes: c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpu/hotplug: Cure the cpusets trainwreck

commit b22afcdf04c96ca58327784e280e10288cfd3303 upstream.

Alexey and Joshua tried to solve a cpusets related hotplug problem which is
user space visible and results in unexpected behaviour for some time after
a CPU has been plugged in and the corresponding uevent was delivered.

cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a
workqueue. This is done because the cpusets code has already a lock
nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or
waiting for the work to finish with cpu_hotplug_lock held can and will
deadlock because that results in the reverse lock order.

As a consequence the uevent can be delivered before cpusets have consistent
state which means that a user space invocation of sched_setaffinity() to
move a task to the plugged CPU fails up to the point where the scheduled
work has been processed.

The same is true for CPU unplug, but that does not create user observable
failure (yet).

It's still inconsistent to claim that an operation is finished before it
actually is and that's the real issue at hand. uevents just make it
reliably observable.

Obviously the problem should be fixed in cpusets/cgroups, but untangling
that is pretty much impossible because according to the changelog of the
commit which introduced this 8 years ago:

 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")

the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and
the whole code is built around that.

So bite the bullet and invoke the relevant cpuset function, which waits for
the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and
only when tasks are not frozen by suspend/hibernate because that would
obviously wait forever.

Waiting there with cpu_add_remove_lock, which is protecting the present
and possible CPU maps, held is not a problem at all because neither work
queues nor cpusets/cgroups have any lockchains related to that lock.

Waiting in the hotplug machinery is not problematic either because there
are already state callbacks which wait for hardware queues to drain. It
makes the operations slightly slower, but hotplug is slow anyway.

This ensures that state is consistent before returning from a hotplug
up/down operation. It's still inconsistent during the operation, but that's
a different story.

Add a large comment which explains why this is done and why this is not a
dump ground for the hack of the day to work around half thought out locking
schemes. Document also the implications vs. hotplug operations and
serialization or the lack of it.

Thanks to Alexy and Joshua for analyzing why this temporary
sched_setaffinity() failure happened.

Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")
Reported-by: Alexey Klimov <aklimov@redhat.com>
Reported-by: Joshua Baker <jobaker@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <aklimov@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tlb: fix the TTL value of tlb_get_level

commit 52218fcd61cb42bde0d301db4acb3ffdf3463cc7 upstream.

The TTL field indicates the level of page table walk holding the *leaf*
entry for the address being invalidated. But currently, the TTL field
may be set to an incorrent value in the following stack:

pte_free_tlb
    __pte_free_tlb
        tlb_remove_table
            tlb_table_invalidate
                tlb_flush_mmu_tlbonly
                    tlb_flush

In this case, we just want to flush a PTE page, but the tlb->cleared_pmds
is set and we get tlb_level = 2 in the tlb_get_level() function. This may
cause some unexpected problems.

This patch set the TTL field to 0 if tlb->freed_tables is set. The
tlb->freed_tables indicates page table pages are freed, not the leaf
entry.

Cc: <stable@vger.kernel.org> # 5.9.x
Fixes: c4ab2cbc1d87 ("arm64: tlb: Set the TTL field in flush_tlb_range")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: ZhuRui <zhurui3@huawei.com>
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Link: https://lore.kernel.org/r/b80ead47-1f88-3a00-18e1-cacc22f54cc4@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci_sunxi: Disable DIPM

commit f6bca4d91b2ea052e917cca3f9d866b5cc1d500a upstream.

DIPM is unsupported or broken on sunxi. Trying to enable the power
management policy med_power_with_dipm on an Allwinner A20 SoC based board
leads to immediate I/O errors and the attached SATA disk disappears from
the /dev filesystem. A reset (power cycle) is required to make the SATA
controller or disk work again. The A10 and A20 SoC data sheets and manuals
don't mention DIPM at all [1], so it's fair to assume that it's simply not
supported. But even if it was, it should be considered broken and best be
disabled in the ahci_sunxi driver.

[1] https://github.com/allwinner-zh/documents/tree/master/

Fixes: c5754b5220f0 ("ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Link: https://lore.kernel.org/r/20210614072539.3307-1-public_timo.s@silentcreek.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Allow UHS-I voltage switch for SDSC cards if supported

commit 09247e110b2efce3a104e57e887c373e0a57a412 upstream.

While initializing an UHS-I SD card, the mmc core first tries to switch to
1.8V I/O voltage, before it continues to change the settings for the bus
speed mode.

However, the current behaviour in the mmc core is inconsistent and doesn't
conform to the SD spec. More precisely, an SD card that supports UHS-I must
set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register
response. When switching to 1.8V I/O the mmc core correctly checks both of
the bits, but only the SD_OCR_S18R bit when changing the settings for bus
speed mode.

Rather than actually fixing the code to confirm to the SD spec, let's
deliberately deviate from it by requiring only the SD_OCR_S18R bit for both
parts. This enables us to support UHS-I for SDSC cards (outside spec),
which is actually being supported by some existing SDSC cards. Moreover,
this fixes the inconsistent behaviour.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Link: https://lore.kernel.org/r/CWXP265MB26803AE79E0AD5ED083BF2A6C4529@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
[Ulf: Rewrote commit message and comments to clarify the changes]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: clear flags before allowing to retune

commit 77347eda64ed5c9383961d1de9165f9d0b7d8df6 upstream.

It might be that something goes wrong during tuning so the MMC core will
immediately trigger a retune. In our case it was:

 - we sent a tuning block
 - there was an error so we need to send an abort cmd to the eMMC
 - the abort cmd had a CRC error
 - retune was set by the MMC core

This lead to a vicious circle causing a performance regression of 75%.
So, clear retuning flags before we enable retuning to start with a known
cleared state.

Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210624151616.38770-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode

commit d0244847f9fc5e20df8b7483c8a4717fe0432d38 upstream.

When an eMMC device is being run in HS400 mode, any access to the
RPMB device will cause the error message "mmc1: Invalid UHS-I mode
selected". This happens as a result of tuning being disabled before
RPMB access and then re-enabled after the RPMB access is complete.
When tuning is re-enabled, the system has to switch from HS400
to HS200 to do the tuning and then back to HS400. As part of
sequence to switch from HS400 to HS200 the system is temporarily
put into HS mode. When switching to HS mode, sdhci_get_preset_value()
is called and does not have support for HS mode and prints the warning
message and returns the preset for SDR12. The fix is to add support
for MMC and SD HS modes to sdhci_get_preset_value().

This can be reproduced on any system running eMMC in HS400 mode
(not HS400ES) by using the "mmc" utility to run the following
command: "mmc rpmb read-counter /dev/mmcblk0rpmb".

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-acpi: Disable write protect detection on Toshiba Encore 2 WT8-B

commit 94ee6782e045645abd9180ab9369b01293d862bd upstream.

On the Toshiba Encore 2 WT8-B the  microSD slot always reports the card
being write-protected even though microSD cards do not have a write-protect
switch at all.

Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk entry to sdhci-acpi.c's
DMI quirk table for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210503092157.5689-1-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/display: Do not zero past infoframes.vsc

commit 07b72960d2b4a087ff2445e286159e69742069cc upstream.

intel_dp_vsc_sdp_unpack() was using a memset() size (36, struct dp_sdp)
larger than the destination (24, struct drm_dp_vsc_sdp), clobbering
fields in struct intel_crtc_state after infoframes.vsc. Use the actual
target size for the memset().

Fixes: 1b404b7dbb10 ("drm/i915/dp: Read out DP SDPs")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617213301.1824728-1-keescook@chromium.org
(cherry picked from commit c88e2647c5bb45d04dc4302018ebe6ebbf331823)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: Don't set allow_fb_modifiers explicitly

commit cee93c028288b9af02919f3bd8593ba61d1e610d upstream.

Since

commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.

Note that this fixes an inconsistency: We've set the cap everywhere,
but only nv50+ supports modifiers. Hence cc stable, but not further
back then the patch from Paul.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-6-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/arm/malidp: Always list modifiers

commit 26c3e7fd5a3499e408915dadae5d5360790aae9a upstream.

Even when all we support is linear, make that explicit. Otherwise the
uapi is rather confusing.

Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-2-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/mdp4: Fix modifier support enabling

commit 35cbb8c91e9cf310277d3dfb4d046df8edf2df33 upstream.

Setting the cap without the modifier list is very confusing to
userspace. Fix that by listing the ones we support explicitly.

Stable backport so that userspace can rely on this working in a
reasonable way, i.e. that the cap set implies IN_FORMATS is available.

Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-5-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tegra: Don't set allow_fb_modifiers explicitly

commit be4306ad928fcf736cbe2616b6dd19d91f1bc083 upstream.

Since

commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.

It was slightly inconsistently though, since planes with only linear
modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport
further than where Paul's patch got added.

Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Reject non-zero src_y and src_x for video planes

commit c6c6a712199ab355ce333fa5764a59506bb107c1 upstream.

[Why]
This hasn't been well tested and leads to complete system hangs on DCN1
based systems, possibly others.

The system hang can be reproduced by gesturing the video on the YouTube
Android app on ChromeOS into full screen.

[How]
Reject atomic commits with non-zero drm_plane_state.src_x or src_y values.

v2:
 - Add code comment describing the reason we're rejecting non-zero
   src_x and src_y
 - Drop gerrit Change-Id
 - Add stable CC
 - Based on amd-staging-drm-next

v3: removed trailing whitespace

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Cc: nicholas.kazlauskas@amd.com
Cc: amd-gfx@lists.freedesktop.org
Cc: alexander.deucher@amd.com
Cc: Roman.Li@amd.com
Cc: hersenxs.wu@amd.com
Cc: danny.wang@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl/amd: Add device HID for new AMD GPIO controller

commit 1ca46d3e43569186bd1decfb02a6b4c4ddb4304b upstream.

Add device HID AMDI0031 to the AMD GPIO controller driver match table.
This controller can be found on Microsoft Surface Laptop 4 devices and
seems similar enough that we can just copy the existing AMDI0030 entry.

Cc: <stable@vger.kernel.org> # 5.10+
Tested-by: Sachi King <nakato@nakato.io>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210512210316.1982416-1-luzmaximilian@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix incorrrect valid irq check

commit e38ca7e422791a4d1c01e56dbf7f9982db0ed365 upstream.

valid DAL irq should be < DAL_IRQ_SOURCES_NUMBER.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: dsi: remove extra component_del() call

commit b354498bbe65c917d521b3b56317ddc9ab217425 upstream.

commit cf6d100dd238 ("drm/rockchip: dsi: add dual mipi support") added
this devcnt field and call to component_del(). However, these both
appear to be erroneous changes left over from an earlier version of the
patch. In the version merged, nothing ever modifies devcnt, meaning
component_del() runs unconditionally and in addition to the
component_del() calls in dw_mipi_dsi_rockchip_host_detach(). The second
call fails to delete anything and produces a warning in dmesg.

If we look at the previous version of the patch[1], however, we see that
it had logic to calculate devcnt and call component_add() in certain
situations. This was removed in v6, and the fact that the deletion code
was not appears to have been an oversight.

[1] https://patchwork.kernel.org/project/dri-devel/patch/20180821140515.22246-8-heiko@sntech.de/

Fixes: cf6d100dd238 ("drm/rockchip: dsi: add dual mipi support")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/201385acb0eeb5dfb037afdc6a94bfbcdab97f99.1618797778.git.tommyhebb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp: Handle zeroed port counts in drm_dp_read_downstream_info()

commit 205bb69a90363541a634a662a599fddb95956524 upstream.

While the DP specification isn't entirely clear on if this should be
allowed or not, some branch devices report having downstream ports present
while also reporting a downstream port count of 0. So to avoid breaking
those devices, we need to handle this in drm_dp_read_downstream_info().

So, to do this we assume there's no downstream port info when the
downstream port count is 0.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3416
Fixes: 3d3721ccb18a ("drm/i915/dp: Extract drm_dp_read_downstream_info()")
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223428.10514-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: hdmi: Prevent clock unbalance

commit 5b006000423667ef0f55721fc93e477b31f22d28 upstream.

Since we fixed the hooks to disable the encoder at boot, we now have an
unbalanced clk_disable call at boot since we never enabled them in the
first place.

Let's mimic the state of the hardware and enable the clocks at boot if
the controller is enabled to get the use-count right.

Cc: <stable@vger.kernel.org> # v5.10+
Fixes: 09c438139b8f ("drm/vc4: hdmi: Implement finer-grained hooks")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-7-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: crtc: Skip the TXP

commit 47a50743031ad4138050ae6d266ddd3dfe845ead upstream.

The vc4_set_crtc_possible_masks is meant to run over all the encoders
and then set their possible_crtcs mask to their associated pixelvalve.

However, since the commit 39fcb2808376 ("drm/vc4: txp: Turn the TXP into
a CRTC of its own"), the TXP has been turned to a CRTC and encoder of
its own, and while it does indeed register an encoder, it no longer has
an associated pixelvalve. The code will thus run over the TXP encoder
and set a bogus possible_crtcs mask, overriding the one set in the TXP
bind function.

In order to fix this, let's skip any virtual encoder.

Cc: <stable@vger.kernel.org> # v5.9+
Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-3-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: txp: Properly set the possible_crtcs mask

commit bf6de8e61509f3c957d7f75f017b18d40a18a950 upstream.

The current code does a binary OR on the possible_crtcs variable of the
TXP encoder, while we want to set it to that value instead.

Cc: <stable@vger.kernel.org> # v5.9+
Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507150515.257424-2-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Call radeon_suspend_kms() in radeon_pci_shutdown() for Loongson64

commit c1bfd74bfef77bcefc88d12eaf8996c0dfd51331 upstream.

On the Loongson64 platform used with Radeon GPU, shutdown or reboot failed
when console=tty is in the boot cmdline.

radeon_suspend_kms() puts the hw in the suspend state, especially set fb
state as FBINFO_STATE_SUSPENDED:

        if (fbcon) {
                console_lock();
                radeon_fbdev_set_suspend(rdev, 1);
                console_unlock();
        }

Then avoid to do any more fb operations in the related functions:

        if (p->state != FBINFO_STATE_RUNNING)
                return;

So call radeon_suspend_kms() in radeon_pci_shutdown() for Loongson64 to fix
this issue, it looks like some kind of workaround like powerpc.

Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Add the missed drm_gem_object_put() in radeon_user_framebuffer_create()

commit 9ba85914c36c8fed9bf3e8b69c0782908c1247b7 upstream.

radeon_user_framebuffer_create() misses to call drm_gem_object_put() in
an error path. Add the missed function call to fix it.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: enable sdma0 tmz for Raven/Renoir(V2)

commit e2329e74a615cc58b25c42b7aa1477a5e3f6a435 upstream.

Without driver loaded, SDMA0_UTCL1_PAGE.TMZ_ENABLE is set to 1
by default for all asic. On Raven/Renoir, the sdma goldsetting
changes SDMA0_UTCL1_PAGE.TMZ_ENABLE to 0.
This patch restores SDMA0_UTCL1_PAGE.TMZ_ENABLE to 1.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Update NV SIMD-per-CU to 2

commit aa6158112645aae514982ad8d56df64428fcf203 upstream.

Navi series GPUs have 2 SIMDs per CU (and then 2 CUs per WGP).
The NV enum headers incorrectly listed this as 4, which later meant
we were incorrectly reporting the number of SIMDs in the HSA
topology. This could cause problems down the line for user-space
applications that want to launch a fixed amount of work to each
SIMD.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/vas: Release reference to tgid during window close

commit 91cdbb955aa94ee0841af4685be40937345d29b8 upstream.

The kernel handles the NX fault by updating CSB or sending
signal to process. In multithread applications, children can
open VAS windows and can exit without closing them. But the
parent can continue to send NX requests with these windows. To
prevent pid reuse, reference will be taken on pid and tgid
when the window is opened and release them during window close.

The current code is not releasing the tgid reference which can
cause pid leak and this patch fixes the issue.

Fixes: db1c08a740635 ("powerpc/vas: Take reference to PID and mm for user space windows")
Cc: stable@vger.kernel.org # 5.8+
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6020fc4d444864fe20f7dcdc5edfe53e67480a1c.camel@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/barrier: Avoid collision with clang's __lwsync macro

commit 015d98149b326e0f1f02e44413112ca8b4330543 upstream.

A change in clang 13 results in the __lwsync macro being defined as
__builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what
the target supports. This breaks the build because of -Werror in
arch/powerpc, along with thousands of warnings:

 In file included from arch/powerpc/kernel/pmc.c:12:
 In file included from include/linux/bug.h:5:
 In file included from arch/powerpc/include/asm/bug.h:109:
 In file included from include/asm-generic/bug.h:20:
 In file included from include/linux/kernel.h:12:
 In file included from include/linux/bitops.h:32:
 In file included from arch/powerpc/include/asm/bitops.h:62:
 arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]
 #define __lwsync()      __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
        ^
 <built-in>:308:9: note: previous definition is here
 #define __lwsync __builtin_ppc_lwsync
        ^
 1 error generated.

Undefine this macro so that the runtime patching introduced by
commit 2d1b2027626d ("powerpc: Fixup lwsync at runtime") continues to
work properly with clang and the build no longer breaks.

Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1386
Link: https://github.com/llvm/llvm-project/commit/62b5df7fe2b3fda1772befeda15598fbef96a614
Link: https://lore.kernel.org/r/20210528182752.1852002-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix lockup on kernel exec fault

commit cd5d5e602f502895e47e18cd46804d6d7014e65c upstream.

The powerpc kernel is not prepared to handle exec faults from kernel.
Especially, the function is_exec_fault() will return 'false' when an
exec fault is taken by kernel, because the check is based on reading
current->thread.regs->trap which contains the trap from user.

For instance, when provoking a LKDTM EXEC_USERSPACE test,
current->thread.regs->trap is set to SYSCALL trap (0xc00), and
the fault taken by the kernel is not seen as an exec fault by
set_access_flags_filter().

Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix
with autonuma") made it clear and handled it properly. But later on
commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute
faults") removed that handling, introducing test based on error_code.
And here is the problem, because on the 603 all upper bits of SRR1
get cleared when the TLB instruction miss handler bails out to ISI.

Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy
search_exception_tables() verification"), an exec fault from kernel
at a userspace address was indirectly caught by the lack of entry for
that address in the exception tables. But after that commit the
kernel mainly relies on KUAP or on core mm handling to catch wrong
user accesses. Here the access is not wrong, so mm handles it.
It is a minor fault because PAGE_EXEC is not set,
set_access_flags_filter() should set PAGE_EXEC and voila.
But as is_exec_fault() returns false as explained in the beginning,
set_access_flags_filter() bails out without setting PAGE_EXEC flag,
which leads to a forever minor exec fault.

As the kernel is not prepared to handle such exec faults, the thing to
do is to fire in bad_kernel_fault() for any exec fault taken by the
kernel, as it was prior to commit d3ca587404b3.

Fixes: d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/024bb05105050f704743a0083fe3548702be5706.1625138205.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: iscsi: Fix iSCSI cls conn state

commit 0dcf8febcb7b9d42bec98bc068e01d1a6ea578b8 upstream.

In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") I missed that libiscsi was now setting the iSCSI class state,
and that patch ended up resetting the state during conn stoppage and using
the wrong state value during ep_disconnect. This patch moves the setting of
the class state to the class module and then fixes the two issues above.

Link: https://lore.kernel.org/r/20210406171746.5016-1-michael.christie@oracle.com
Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Cc: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: iscsi: Fix race condition between login and sync thread

commit 9e67600ed6b8565da4b85698ec659b5879a6c1c6 upstream.

A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.

To fix this a new connection state, ISCSI_CONN_BOUND, is added:

 - Set the connection state value to ISCSI_CONN_DOWN upon
   iscsi_if_ep_disconnect() and iscsi_if_stop_conn()

 - Set the connection state to the newly created value ISCSI_CONN_BOUND
   after bind connection (transport->bind_conn())

 - In iscsi_set_param(), return -ENOTCONN if the connection state is not
   either ISCSI_CONN_BOUND or ISCSI_CONN_UP

Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: convert io_buffer_idr to XArray

commit 9e15c3a0ced5a61f320b989072c24983cb1620c1 upstream.

Like we did for the personality idr, convert the IO buffer idr to use
XArray. This avoids a use-after-free on removal of entries, since idr
doesn't like doing so from inside an iterator, and it nicely reduces
the amount of code we need to support this feature.

Fixes: 5a2e745d4d43 ("io_uring: buffer registration infrastructure")
Cc: stable@vger.kernel.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: yangerkun <yangerkun@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: Convert personality_idr to XArray

commit 61cf93700fe6359552848ed5e3becba6cd760efa upstream.

You can't call idr_remove() from within a idr_for_each() callback,
but you can call xa_erase() from an xa_for_each() loop, so switch the
entire personality_idr from the IDR to the XArray.  This manifests as a
use-after-free as idr_for_each() attempts to walk the rest of the node
after removing the last entry from it.

Fixes: 071698e13ac6 ("io_uring: allow registering credentials")
Cc: stable@vger.kernel.org # 5.6+
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[Pavel: rebased (creds load was moved into io_init_req())]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ccff36e1375f2b0ebf73d957f037b43becc0dde.1615212806.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: simplify io_remove_personalities()

commit 0bead8cd39b9c9c7c4e902018ccf129107ac50ef upstream.

The function io_remove_personalities() is very similar to
io_unregister_personality(),so implement io_remove_personalities()
calling io_unregister_personality().

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm,hwpoison: return -EBUSY when migration fails

commit 3f4b815a439adfb8f238335612c4b28bc10084d8 upstream.

Currently, we return -EIO when we fail to migrate the page.

Migrations' failures are rather transient as they can happen due to
several reasons, e.g: high page refcount bump, mapping->migrate_page
failing etc.  All meaning that at that time the page could not be
migrated, but that has nothing to do with an EIO error.

Let us return -EBUSY instead, as we do in case we failed to isolate the
page.

While are it, let us remove the "ret" print as its value does not change.

Link: https://lkml.kernel.org/r/20201209092818.30417-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: fix I/O error on fsync() in detached loop devices

commit 4ceddce55eb35d15b0f87f5dcf6f0058fd15d3a4 upstream.

There's an I/O error on fsync() in a detached loop device
if it has been previously attached.

The issue is write cache is enabled in the attach path in
loop_configure() but it isn't disabled in the detach path;
thus it remains enabled in the block device regardless of
whether it is attached or not.

Now fsync() can get an I/O request that will just be failed
later in loop_queue_rq() as device's state is not 'Lo_bound'.

So, disable write cache in the detach path.

Do so based on the queue flag, not the loop device flag for
read-only (used to enable) as the queue flag can be changed
via sysfs even on read-only loop devices (e.g., losetup -r.)

Test-case:

    # DEV=/dev/loop7

    # IMG=/tmp/image
    # truncate --size 1M $IMG

    # losetup $DEV $IMG
    # losetup -d $DEV

Before:

    # strace -e fsync parted -s $DEV print 2>&1 | grep fsync
    fsync(3)                                = -1 EIO (Input/output error)
    Warning: Error fsyncing/closing /dev/loop7: Input/output error
    [  982.529929] blk_update_request: I/O error, dev loop7, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0

After:

    # strace -e fsync parted -s $DEV print 2>&1 | grep fsync
    fsync(3)                                = 0

Co-developed-by: Eric Desrochers <eric.desrochers@canonical.com>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: Enable USB3 for rk3328 Rock64

commit bbac8bd65f5402281cb7b0452c1c5f367387b459 upstream.

Enable USB3 nodes for the rk3328-based PINE Rock64 board.

The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.

[wens@csie.org: Rebased onto v5.12]

Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
[wens@csie.org: Rewrote commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210504083616.9654-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: add rk3328 dwc3 usb controller node

commit 44dd5e2106dc2fd01697b539085818d1d1c58df0 upstream.

RK3328 SoCs have one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210209192350.7130-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath11k: unlock on error path in ath11k_mac_op_add_interface()

commit 59ec8e2fa5aaed6afd18d5362dc131aab92406e7 upstream.

These error paths need to drop the &ar->conf_mutex before returning.

Fixes: 690ace20ff79 ("ath11k: peer delete synchronization with firmware")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/X85sVGVP/0XvlrEJ@mwanda
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: MT extensions are not available on MIPS32r1

commit cad065ed8d8831df67b9754cc4437ed55d8b48c0 upstream.

MIPS MT extensions were added with the MIPS 34K processor, which was
based on the MIPS32r2 ISA.

This fixes a build error when building a generic kernel for a MIPS32r1
CPU.

Fixes: c434b9f80b09 ("MIPS: Kconfig: add MIPS_GENERIC_KERNEL symbol")
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/resctrl: Fix incorrect parsing of option "-t"

commit 1421ec684a43379b2aa3cfda20b03d38282dc990 upstream.

Resctrl test suite accepts command line argument "-t" to specify the
unit tests to run in the test list (e.g., -t mbm,mba,cmt,cat) as
documented in the help.

When calling strtok() to parse the option, the incorrect delimiters
argument ":\t" is used. As a result, passing "-t mbm,mba,cmt,cat" throws
an invalid option error.

Fix this by using delimiters argument "," instead of ":\t" for parsing
of unit tests list. At the same time, remove the unnecessary "spaces"
between the unit tests in help documentation to prevent confusion.

Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: 78941183d1b1 ("selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest")
Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Fixes: 034c7678dd2c ("selftests/resctrl: Add README for resctrl tests")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: set mips32r5 for virt extensions

[ Upstream commit c994a3ec7ecc8bd2a837b2061e8a76eb8efc082b ]

Clang's integrated assembler only accepts these instructions when the
cpu is set to mips32r5. With this change, we can assemble
malta_defconfig with Clang via `make LLVM_IAS=1`.

Link: https://github.com/ClangBuiltLinux/linux/issues/763
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops

[ Upstream commit 6817c944430d00f71ccaa9c99ff5b0096aeb7873 ]

The cause of the problem is as follows:
1. when cat /sys/devices/system/memory/memory0/valid_zones,
   test_pages_in_a_zone() will be called.
2. test_pages_in_a_zone() finds the zone according to stat_pfn = 0.
   The smallest pfn of the numa node in the mips architecture is 128,
   and the page corresponding to the previous 0~127 pfn is not
   initialized (page->flags is 0xFFFFFFFF)
3. The nid and zonenum obtained using page_zone(pfn_to_page(0)) are out
   of bounds in the corresponding array,
   &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)],
   access to the out-of-bounds zone member variables appear abnormal,
   resulting in Oops.
Therefore, it is necessary to keep the page between 0 and the minimum
pfn to prevent Oops from appearing.

Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: add size validation when walking chunks

[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]

The first chunk in a packet is ensured to be present at the beginning of
sctp_rcv(), as a packet needs to have at least 1 chunk. But the second
one, may not be completely available and ch->length can be over
uninitialized memory.

Fix here is by only trying to walk on the next chunk if there is enough to
hold at least the header, and then proceed with the ch->length validation
that is already there.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: validate from_addr_param return

[ Upstream commit 0c5dc070ff3d6246d22ddd931f23a6266249e3db ]

Ilja reported that, simply putting it, nothing was validating that
from_addr_param functions were operating on initialized memory. That is,
the parameter itself was being validated by sctp_walk_params, but it
doesn't check for types and their specific sizes and it could be a 0-length
one, causing from_addr_param to potentially work over the next parameter or
even uninitialized memory.

The fix here is to, in all calls to from_addr_param, check if enough space
is there for the wanted IP address type.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

flow_offload: action should not be NULL when it is referenced

[ Upstream commit 9ea3e52c5bc8bb4a084938dc1e3160643438927a ]

"action" should not be NULL when it is referenced.

Signed-off-by: gushengxian <13145886936@163.com>
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix false positive kmemleak report in bpf_ringbuf_area_alloc()

[ Upstream commit ccff81e1d028bbbf8573d3364a87542386c707bf ]

kmemleak scans struct page, but it does not scan the page content. If we
allocate some memory with kmalloc(), then allocate page with alloc_page(),
and if we put kmalloc pointer somewhere inside that page, kmemleak will
report kmalloc pointer as a false positive.

We can instruct kmemleak to scan the memory area by calling kmemleak_alloc()
and kmemleak_free(), but part of struct bpf_ringbuf is mmaped to user space,
and if struct bpf_ringbuf changes we would have to revisit and review size
argument in kmemleak_alloc(), because we do not want kmemleak to scan the
user space memory. Let's simplify things and use kmemleak_not_leak() here.

For posterity, also adding additional prior analysis from Andrii:

  I think either kmemleak or syzbot are misreporting this. I've added a
  bunch of printks around all allocations performed by BPF ringbuf. [...]
  On repro side I get these two warnings:

  [vmuser@archvm bpf]$ sudo ./repro
  BUG: memory leak
  unreferenced object 0xffff88810d538c00 (size 64):
    comm "repro", pid 2140, jiffies 4294692933 (age 14.540s)
    hex dump (first 32 bytes):
      00 af 19 04 00 ea ff ff c0 ae 19 04 00 ea ff ff  ................
      80 ae 19 04 00 ea ff ff c0 29 2e 04 00 ea ff ff  .........)......
    backtrace:
      [<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
      [<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
      [<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
      [<00000000f601d565>] do_syscall_64+0x2d/0x40
      [<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae

  BUG: memory leak
  unreferenced object 0xffff88810d538c80 (size 64):
    comm "repro", pid 2143, jiffies 4294699025 (age 8.448s)
    hex dump (first 32 bytes):
      80 aa 19 04 00 ea ff ff 00 ab 19 04 00 ea ff ff  ................
      c0 ab 19 04 00 ea ff ff 80 44 28 04 00 ea ff ff  .........D(.....
    backtrace:
      [<0000000077bfbfbd>] __bpf_map_area_alloc+0x31/0xc0
      [<00000000587fa522>] ringbuf_map_alloc.cold.4+0x48/0x218
      [<0000000044d49e96>] __do_sys_bpf+0x359/0x1d90
      [<00000000f601d565>] do_syscall_64+0x2d/0x40
      [<0000000043d3112a>] entry_SYSCALL_64_after_hwframe+0x44/0xae

  Note that both reported leaks (ffff88810d538c80 and ffff88810d538c00)
  correspond to pages array bpf_ringbuf is allocating and tracking properly
  internally. Note also that syzbot repro doesn't close FD of created BPF
  ringbufs, and even when ./repro itself exits with error, there are still
  two forked processes hanging around in my system. So clearly ringbuf maps
  are alive at that point. So reporting any memory leak looks weird at that
  point, because that memory is being used by active referenced BPF ringbuf.

  It's also a question why repro doesn't clean up its forks. But if I do a
  `pkill repro`, I do see that all the allocated memory is /properly/ cleaned
  up [and the] "leaks" are deallocated properly.

  BTW, if I add close() right after bpf() syscall in syzbot repro, I see that
  everything is immediately deallocated, like designed. And no memory leak
  is reported. So I don't think the problem is anywhere in bpf_ringbuf code,
  rather in the leak detection and/or repro itself.

Reported-by: syzbot+5d895828587f49e7fe9b@syzkaller.appspotmail.com
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
[ Daniel: also included analysis from Andrii to the commit log ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+5d895828587f49e7fe9b@syzkaller.appspotmail.com
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzYk+dqs+jwu6VKXP-RttcTEGFe+ySTGWT9CRNkagDiJVA@mail.gmail.com
Link: https://lore.kernel.org/lkml/YNTAqiE7CWJhOK2M@nuc10
Link: https://lore.kernel.org/lkml/20210615101515.GC26027@arm.com
Link: https://syzkaller.appspot.com/bug?extid=5d895828587f49e7fe9b
Link: https://lore.kernel.org/bpf/20210626181156.1873604-1-rkovhaev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Ensure _sum and _avg values stay consistent

[ Upstream commit 1c35b07e6d3986474e5635be566e7bc79d97c64d ]

The _sum and _avg values are in general sync together with the PELT
divider. They are however not always completely in perfect sync,
resulting in situations where _sum gets to zero while _avg stays
positive. Such situations are undesirable.

This comes from the fact that PELT will increase period_contrib, also
increasing the PELT divider, without updating _sum and _avg values to
stay in perfect sync where (_sum == _avg * divider). However, such PELT
change will never lower _sum, making it impossible to end up in a
situation where _sum is zero and _avg is not.

Therefore, we need to ensure that when subtracting load outside PELT,
that when _sum is zero, _avg is also set to zero. This occurs when
(_sum < _avg * divider), and the subtracted (_avg * divider) is bigger
or equal to the current _sum, while the subtracted _avg is smaller than
the current _avg.

Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210624111815.57937-1-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.

[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]

This is btsoc timing issue, after host start to downloading bt firmware,
ep2 need time to switch from function acl to function dfu, so host add
20ms delay as workaround.

Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: mgmt: Fix the command returns garbage parameter value

[ Upstream commit 02ce2c2c24024aade65a8d91d6a596651eaf2d0a ]

When the Get Device Flags command fails, it returns the error status
with the parameters filled with the garbage values. Although the
parameters are not used, it is better to fill with zero than the random
values.

Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add support USB ALT 3 for WBS

[ Upstream commit e848dbd364aca44c9d23c04bef964fab79e2b34f ]

Because mSBC frames do not need to be aligned to the SCO packet
boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC
data satisfy 60 Bytes avoid payload unaligned situation and fixed
some headset no voise issue.

USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: Fix invalid access on ECRED Connection response

[ Upstream commit de895b43932cb47e69480540be7eca289af24f23 ]

The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: L2CAP: Fix invalid access if ECRED Reconfigure fails

[ Upstream commit 1fa20d7d4aad02206e84b74915819fbe9f81dab3 ]

The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add a new QCA_ROME device (0cf3:e500)

[ Upstream commit 0324d19cb99804d99e42c990b8b1e191575a091b ]

This patch adds the 0cf3:e500 Bluetooth device (from a QCA9377 board) as a
QCA_ROME device.  It appears to be functionally identical to another device
ID, also from a QCA9377 board, which was previously marked as QCA_ROME in
0a03f98b98c201191e3ba15a0e33f46d8660e1fd
("Bluetooth: Add a new 04ca:3015 QCA_ROME device").

Without this patch, the WiFi side of the QCA9377 board is slow or unusable
when the Bluetooth side is in use.

See https://askubuntu.com/a/1137852 for another report of QCA_ROME fixing
this issue for this device ID.

/sys/kernel/debug/usb/devices:

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=e500 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Daniel Lenski <dlenski@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Shutdown controller after workqueues are flushed or cancelled

[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[  509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[  514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[  530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  545.660350] usb 3-10: device descriptor read/64, error -110
[  561.283530] usb 3-10: device descriptor read/64, error -110
[  561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[  568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[  578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[  586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[  596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)

Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G        W         5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS:  00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865]  ? skb_release_head_state+0x5e/0x80
[ 2048.663873]  kfree_skb+0x2f/0xb0
[ 2048.663881]  btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905]  hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954]  ? __cond_resched+0x1a/0x50
[ 2048.663962]  hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007]  rfkill_set_block+0x98/0x170
[ 2048.664016]  rfkill_fop_write+0x136/0x1e0
[ 2048.664022]  vfs_write+0xc7/0x260
[ 2048.664030]  ksys_write+0xb1/0xe0
[ 2048.664035]  ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042]  __x64_sys_write+0x1a/0x20
[ 2048.664048]  do_syscall_64+0x40/0xb0
[ 2048.664055]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff

So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix alt settings for incoming SCO with transparent coding format

[ Upstream commit 06d213d8a89a6f55b708422c3dda2b22add10748 ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  #309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 #310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  #311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               #314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix the HCI to MGMT status conversion table

[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]

0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.

Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.

[ Upstream commit 8454ed9ff9647e31e061fb5eb2e39ce79bc5e960 ]

This patch reduce in-token during download patch procedure.
Don't submit urb for polling event before sending hci command.

Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Fix rdma_resolve_route() memory leak

[ Upstream commit 74f160ead74bfe5f2b38afb4fcf86189f9ff40c9 ]

Fix a memory leak when "mda_resolve_route() is called more than once on
the same "rdma_cm_id".

This is possible if cma_query_handler() triggers the
RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and
allows rdma_resolve_route() to be called again.

Link: https://lore.kernel.org/r/f6662b7b-bdb7-2706-1e12-47c61d3474b6@oracle.com
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ip: avoid OOM kills with large UDP sends over loopback

[ Upstream commit 6d123b81ac615072a8525c13c6c41b695270a15d ]

Dave observed number of machines hitting OOM on the UDP send
path. The workload seems to be sending large UDP packets over
loopback. Since loopback has MTU of 64k kernel will try to
allocate an skb with up to 64k of head space. This has a good
chance of failing under memory pressure. What's worse if
the message length is <32k the allocation may trigger an
OOM killer.

This is entirely avoidable, we can use an skb with page frags.

af_unix solves a similar problem by limiting the head
length to SKB_MAX_ALLOC. This seems like a good and simple
approach. It means that UDP messages > 16kB will now
use fragments if underlying device supports SG, if extra
allocator pressure causes regressions in real workloads
we can switch to trying the large allocation first and
falling back.

v4: pre-calculate all the additions to alloclen so
    we can be sure it won't go over order-2

Reported-by: Dave Jones <dsj@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media, bpf: Do not copy more entries than user space requested

[ Upstream commit 647d446d66e493d23ca1047fa8492b0269674530 ]

The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to
see how many entries user space provided and return ENOSPC if there are
more programs than that. Before this patch, this is not checked and
ENOSPC is never returned.

Note that one lirc device is limited to 64 bpf programs, and user space
I'm aware of -- ir-keytable -- always gives enough space for 64 entries
already. However, we should not copy program ids than are requested.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623213754.632-1-sean@mess.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/isert: Align target max I/O size to initiator size

[ Upstream commit 109d19a5eb3ddbdb87c43bfd4bcf644f4569da64 ]

Since the Linux iser initiator default max I/O size set to 512KB and since
there is no handshake procedure for this size in iser protocol, set the
default max IO size of the target to 512KB as well.

For changing the default values, there is a module parameter for both
drivers.

Link: https://lore.kernel.org/r/20210524085215.29005-1-mgurtovoy@nvidia.com
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211_hwsim: add concurrent channels scanning support over virtio

[ Upstream commit 626c30f9e77354301ff9162c3bdddaf92d9b5cf3 ]

This fixed the crash when setting channels to 2 or more when
communicating over virtio.

Signed-off-by: Weilun Du <wdu@google.com>
Link: https://lore.kernel.org/r/20210506180530.3418576-1-wdu@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: consider per-CPU statistics if present

[ Upstream commit d656a4c6ead6c3f252b2f2532bc9735598f7e317 ]

If we have been keeping per-CPU statistics, consider them
regardless of USES_RSS, because we may not actually fill
those, for example in non-fast-RX cases when the connection
is not compatible with fast-RX. If we didn't fill them, the
additional data will be zero and not affect anything, and
if we did fill them then it's more correct to consider them.

This fixes an issue in mesh mode where some statistics are
not updated due to USES_RSS being set, but fast-RX isn't
used.

Reported-by: Thiraviyam Mariyappan <tmariyap@codeaurora.org>
Link: https://lore.kernel.org/r/20210610220814.13b35f5797c5.I511e9b33c5694e0d6cef4b6ae755c873d7c22124@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: fix default HE tx bitrate mask in 2G band

[ Upstream commit 9df66d5b9f45c39b3925d16e8947cc10009b186d ]

In 2G band, a HE sta can only supports HT and HE, but not supports VHT.
In this case, default HE tx bitrate mask isn't filled, when we use iw to
set bitrates without any parameter.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210609075944.51130-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireless: wext-spy: Fix out-of-bounds warning

[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]

Fix the following out-of-bounds warning:

net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: error code if SRIOV cannot be disabled

[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]

If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.

Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.

In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: avoid double pci_remove of VFs

[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]

If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.

Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.

2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
  least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
  echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove

Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.

Example of a log with the error:
    list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:47!
    [...trimmed...]
    RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
    [...trimmed...]
    Call Trace:
    efx_dissociate+0x1f/0x140 [sfc]
    efx_pci_remove+0x27/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    pci_stop_bus_device+0x69/0x90
    pci_stop_and_remove_bus_device+0xe/0x20
    pci_iov_remove_virtfn+0xba/0x120
    sriov_disable+0x2f/0xe0
    efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
    ? pcie_aer_is_native+0x12/0x40
    efx_ef10_sriov_fini+0x72/0x110 [sfc]
    efx_pci_remove+0x62/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    unbind_store+0xf6/0x130
    kernfs_fop_write+0x116/0x190
    vfs_write+0xa5/0x1a0
    ksys_write+0x4f/0xb0
    do_syscall_64+0x5b/0x1a0
    entry_SYSCALL_64_after_hwframe+0x65/0xca

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: fix context info freeing

[ Upstream commit 26d18c75a7496c4c52b0b6789e713dc76ebfbc87 ]

After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.

Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: free IML DMA memory allocation

[ Upstream commit 310f60f53a86eba680d9bc20a371e13b06a5f903 ]

In the case of gen3 devices with image loader (IML) support,
we were leaking the IML DMA allocation and never freeing it.
Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.07e117dbedb7.I7bb9ebbe0617656986c2a598ea5e827b533bd3b9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: fix error print when session protection ends

[ Upstream commit 976ac0af7ba2c5424bc305b926c0807d96fdcc83 ]

When the session protection ends and the Driver is not
associated or a beacon was not heard, the Driver
prints "No beacons heard...".
That's confusing for the case where not associated.
Change the print when not associated to "Not associated...".

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.41a5a5a894fa.I9eabb76e7a3a7f4abbed8f2ef918f1df8e825726@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: don't change band on bound PHY contexts

[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ]

When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.

This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.

Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Don't overwrite errno from ib_umem_get()

[ Upstream commit 20ec0a6d6016aa28b9b3299be18baef1a0f91cd2 ]

rxe_mr_init_user() always returns the fixed -EINVAL when ib_umem_get()
fails so it's hard for user to know which actual error happens in
ib_umem_get(). For example, ib_umem_get() will return -EOPNOTSUPP when
trying to pin pages on a DAX file.

Return actual error as mlx4/mlx5 does.

Link: https://lore.kernel.org/r/20210621071456.4259-1-ice_yangxiao@163.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vsock: notify server to shutdown when client has pending signal

[ Upstream commit c7ff9cff70601ea19245d997bb977344663434c7 ]

The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.

However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.

            client                        server

1. sk_state=TCP_SYN_SENT         |
2. call ->connect()              |
3. wait reply                    |
                                 | 4. sk_state=TCP_ESTABLISHED
                                 | 5. insert to connected list
                                 | 6. reply to the client
7. sk_state=TCP_ESTABLISHED      |
8. insert to connected list      |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE           |
client is exiting...             |
11. call ->release()             |
     virtio_transport_close
      if (!(sk->sk_state == TCP_ESTABLISHED ||
      sk->sk_state == TCP_CLOSING))
return true; *return at here, the server cannot notice the connection is corrupt*

So the client should notify the peer in this case.

Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418
Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: nicstar: register the interrupt handler in the right place

[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]

Because the error handling is sequential, the application of resources
should be carried out in the order of error handling, so the operation
of registering the interrupt handler should be put in front, so as not
to free the unregistered interrupt handler during error handling.

This log reveals it:

[    3.438724] Trying to free already-free IRQ 23
[    3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[    3.440039] Modules linked in:
[    3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.441561] RIP: 0010:free_irq+0xfb/0x480
[    3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994] FS:  0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[    3.444994] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.444994] Call Trace:
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Kernel panic - not syncing: panic_on_warn set ...
[    3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.444994] Call Trace:
[    3.444994]  dump_stack+0xba/0xf5
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  panic+0x155/0x3ed
[    3.444994]  ? __warn+0xed/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  __warn+0x103/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  report_bug+0x119/0x1c0
[    3.444994]  handle_bug+0x3b/0x80
[    3.444994]  exc_invalid_op+0x18/0x70
[    3.444994]  asm_exc_invalid_op+0x12/0x20
[    3.444994] RIP: 0010:free_irq+0xfb/0x480
[    3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994]  ? vprintk_func+0x71/0x110
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Dumping ftrace buffer:
[    3.444994]    (ftrace buffer empty)
[    3.444994] Kernel Offset: disabled
[    3.444994] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: nicstar: use 'dma_free_coherent' instead of 'kfree'

[ Upstream commit 6a1e5a4af17e440dd82a58a2c5f40ff17a82b722 ]

When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for
error handling, but the correct memory free function should be used,
otherwise it will cause an error. Since 'card->rsq.org' and
'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they
should be freed using 'dma_free_coherent'.

Fix this by using 'dma_free_coherent' instead of 'kfree'

This log reveals it:

[    3.440294] kernel BUG at mm/slub.c:4206!
[    3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[    3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[    3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.442780] RIP: 0010:kfree+0x26a/0x300
[    3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.443396] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.443396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.443396] Call Trace:
[    3.443396]  ns_init_card_error+0x12c/0x220
[    3.443396]  nicstar_init_one+0x10d2/0x1130
[    3.443396]  local_pci_probe+0x4a/0xb0
[    3.443396]  pci_device_probe+0x126/0x1d0
[    3.443396]  ? pci_device_remove+0x100/0x100
[    3.443396]  really_probe+0x27e/0x650
[    3.443396]  driver_probe_device+0x84/0x1d0
[    3.443396]  ? mutex_lock_nested+0x16/0x20
[    3.443396]  device_driver_attach+0x63/0x70
[    3.443396]  __driver_attach+0x117/0x1a0
[    3.443396]  ? device_driver_attach+0x70/0x70
[    3.443396]  bus_for_each_dev+0xb6/0x110
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  driver_attach+0x22/0x30
[    3.443396]  bus_add_driver+0x1e6/0x2a0
[    3.443396]  driver_register+0xa4/0x180
[    3.443396]  __pci_register_driver+0x77/0x80
[    3.443396]  ? uPD98402_module_init+0xd/0xd
[    3.443396]  nicstar_init+0x1f/0x75
[    3.443396]  do_one_initcall+0x7a/0x3d0
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.443396]  kernel_init_freeable+0x2a7/0x2f9
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  kernel_init+0x13/0x180
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ret_from_fork+0x1f/0x30
[    3.443396] Modules linked in:
[    3.443396] Dumping ftrace buffer:
[    3.443396]    (ftrace buffer empty)
[    3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[    3.458922] RIP: 0010:kfree+0x26a/0x300
[    3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.463368] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.463949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.465860] Kernel panic - not syncing: Fatal exception
[    3.466370] Dumping ftrace buffer:
[    3.466616]    (ftrace buffer empty)
[    3.466871] Kernel Offset: disabled
[    3.467122] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: add ndo_select_queue to fix TX bandwidth fluctuations

[ Upstream commit 52c4a1a85f4b346c39c896c0168f4a843b3385ff ]

As we know that AVB is enabled by default, and the ENET IP design is
queue 0 for best effort, queue 1&2 for AVB Class A&B. Bandwidth of each
queue 1&2 set in driver is 50%, TX bandwidth fluctuated when selecting
tx queues randomly with FEC_QUIRK_HAS_AVB quirk available.

This patch adds ndo_select_queue callback to select queues for
transmitting to fix this issue. It will always return queue 0 if this is
not a vlan packet, and return queue 1 or 2 based on priority of vlan
packet.

You may complain that in fact we only use single queue for trasmitting
if we are not targeted to VLAN. Yes, but seems we have no choice, since
AVB is enabled when the driver probed, we can't switch this feature
dynamicly. After compare multiple queues to single queue, TX throughput
almost no improvement.

One way we can implemet is to configure the driver to multiple queues
with Round-robin scheme by default. Then add ndo_setup_tc callback to
enable/disable AVB feature for users. Unfortunately, ENET AVB IP seems
not follow the standard 802.1Qav spec. We only can program
DMAnCFG[IDLE_SLOPE] field to calculate bandwidth fraction. And idle
slope is restricted to certain valus (a total of 19). It's far away from
CBS QDisc implemented in Linux TC framework. If you strongly suggest to do
this, I think we only can support limited numbers of bandwidth and reject
others, but it's really urgly and wried.

With this patch, VLAN tagged packets route to queue 0/1/2 based on vlan
priority; VLAN untagged packets route to queue 0.

Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: add PMD table accounting into MIPS'pmd_alloc_one

[ Upstream commit ed914d48b6a1040d1039d371b56273d422c0081e ]

This fixes Page Table accounting bug.

MIPS is the ONLY arch just defining __HAVE_ARCH_PMD_ALLOC_ONE alone.
Since commit b2b29d6d011944 (mm: account PMD tables like PTE tables),
"pmd_free" in asm-generic with PMD table accounting and "pmd_alloc_one"
in MIPS without PMD table accounting causes PageTable accounting number
negative, which read by global_zone_page_state(), always returns 0.

Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtl8xxxu: Fix device info for RTL8192EU devices

[ Upstream commit c240b044edefa3c3af4014a4030e017dd95b59a1 ]

Based on 2001:3319 and 2357:0109 which I used to test the fix and
0bda:818b and 2357:0108 for which I found efuse dumps online.

== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.

== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.

Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode

[ Upstream commit 2707ff4dd7b1479dbd44ebb3c74788084cc95245 ]

The value of station mode is always 0.

Fixed: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>