David Hildenbrand [Fri, 21 Oct 2022 10:11:35 +0000 (12:11 +0200)]
mm: remove VM_FAULT_WRITE
All users -- GUP and KSM -- are gone, let's just remove it.
Link: https://lkml.kernel.org/r/20221021101141.84170-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Fri, 21 Oct 2022 10:11:34 +0000 (12:11 +0200)]
mm/ksm: simplify break_ksm() to not rely on VM_FAULT_WRITE
Now that GUP no longer requires VM_FAULT_WRITE, break_ksm() is the sole
remaining user of VM_FAULT_WRITE. As we also want to stop triggering a
fake write fault and instead use FAULT_FLAG_UNSHARE -- similar to
GUP-triggered unsharing when taking a R/O pin on a shared anonymous page
(including KSM pages), let's stop relying on VM_FAULT_WRITE.
Let's rework break_ksm() to not rely on the return value of
handle_mm_fault() anymore to figure out whether COW-breaking was
successful. Simply perform another follow_page() lookup to verify the
result.
While this makes break_ksm() slightly less efficient, we can simplify
handle_mm_fault() a little and easily switch to FAULT_FLAG_UNSHARE without
introducing similar KSM-specific behavior for FAULT_FLAG_UNSHARE.
In my setup (AMD Ryzen 9 3900X), running the KSM selftest to test unmerge
performance on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in
a performance degradation of ~4% -- 5% (old: ~5250 MiB/s, new: ~5010
MiB/s).
I don't think that we particularly care about that performance drop when
unmerging. If it ever turns out to be an actual performance issue, we can
think about a better alternative for FAULT_FLAG_UNSHARE -- let's just keep
it simple for now.
Link: https://lkml.kernel.org/r/20221021101141.84170-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Fri, 21 Oct 2022 10:11:33 +0000 (12:11 +0200)]
selftests/vm: add test to measure MADV_UNMERGEABLE performance
Let's add a test to measure performance of KSM breaking not triggered via
COW, but triggered by disabling KSM on an area filled with KSM pages via
MADV_UNMERGEABLE.
Link: https://lkml.kernel.org/r/20221021101141.84170-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Fri, 21 Oct 2022 10:11:38 +0000 (12:11 +0200)]
mm/pagewalk: don't trigger test_walk() in walk_page_vma()
As Peter points out, the caller passes a single VMA and can just do that
check itself.
And in fact, no existing users rely on test_walk() getting called. So
let's just remove it and make the implementation slightly more efficient.
Link: https://lkml.kernel.org/r/20221021101141.84170-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Fri, 21 Oct 2022 10:11:36 +0000 (12:11 +0200)]
selftests/vm: add KSM unmerge tests
Patch series "mm/ksm: break_ksm() cleanups and fixes", v2.
This series cleans up and fixes break_ksm(). In summary, we no longer use
fake write faults to break COW but instead FAULT_FLAG_UNSHARE. Further,
we move away from using follow_page() --- that we can hopefully remove
completely at one point --- and use new walk_page_range_vma() instead.
Fortunately, we can get rid of VM_FAULT_WRITE and FOLL_MIGRATION in common
code now.
Extend the existing ksm tests by an unmerge benchmark, and a some new
unmerge tests.
Also, add a selftest to measure MADV_UNMERGEABLE performance. In my setup
(AMD Ryzen 9 3900X), running the KSM selftest to test unmerge performance
on 2 GiB (taskset 0x8 ./ksm_tests -D -s 2048), this results in a
performance degradation of ~6% -- 7% (old: ~5250 MiB/s, new: ~4900 MiB/s).
I don't think we particularly care for now, but it's good to be aware of
the implication.
This patch (of 9):
Let's add three unmerge tests (MADV_UNMERGEABLE unmerging all pages in the
range).
test_unmerge(): basic unmerge tests
test_unmerge_discarded(): have some pte_none() entries in the range
test_unmerge_uffd_wp(): protect the merged pages using uffd-wp
ksm_tests.c currently contains a mixture of benchmarks and tests, whereby
each test is carried out by executing the ksm_tests binary with specific
parameters. Let's add new ksm_functional_tests.c that performs multiple,
smaller functional tests all at once.
Link: https://lkml.kernel.org/r/20221021101141.84170-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221021101141.84170-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joel Savitz [Tue, 18 Oct 2022 23:12:22 +0000 (19:12 -0400)]
selftests/vm: enable running select groups of tests
Our memory management kernel CI testing at Red Hat uses the VM
selftests and we have run into two problems:
First, our LTP tests overlap with the VM selftests.
We want to avoid unhelpful redundancy in our testing practices.
Second, we have observed the current run_vmtests.sh to report overall
failure/ambiguous results in the case that a machine lacks the necessary
hardware to perform one or more of the tests. E.g. ksm tests that
require more than one numa node.
We want to be able to run the vm selftests suitable to particular hardware.
Add the ability to run one or more groups of vm tests via run_vmtests.sh
instead of simply all-or-none in order to solve these problems.
Preserve existing default behavior of running all tests when the script
is invoked with no arguments.
Documentation of test groups is included in the patch as follows:
# ./run_vmtests.sh [ -h || --help ]
usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"]
-t: specify specific categories to tests to run
-h: display this message
The default behavior is to run all tests.
Alternatively, specific groups tests can be run by passing a string
to the -t argument containing one or more of the following categories
separated by spaces:
- mmap
tests for mmap(2)
- gup_test
tests for gup using gup_test interface
- userfaultfd
tests for userfaultfd(2)
- compaction
a test for the patch "Allow compaction of unevictable pages"
- mlock
tests for mlock(2)
- mremap
tests for mremap(2)
- hugevm
tests for very large virtual address space
- vmalloc
vmalloc smoke tests
- hmm
hmm smoke tests
- madv_populate
test memadvise(2) MADV_POPULATE_{READ,WRITE} options
- memfd_secret
test memfd_secret(2)
- process_mrelease
test process_mrelease(2)
- ksm
ksm tests that do not require >=2 NUMA nodes
- ksm_numa
ksm tests that require >=2 NUMA nodes
- pkey
memory protection key tests
- soft_dirty
test soft dirty page bit semantics
- anon_cow
test anonymous copy-on-write semantics
example: ./run_vmtests.sh -t "hmm mmap ksm"
Link: https://lkml.kernel.org/r/20221018231222.1884715-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Sat, 10 Dec 2022 03:31:11 +0000 (19:31 -0800)]
Merge branch 'mm-hotfixes-stable' into mm-stable
Tejun Heo [Thu, 8 Dec 2022 02:53:15 +0000 (16:53 -1000)]
memcg: fix possible use-after-free in memcg_write_event_control()
memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call. As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file. Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.
Prior to
347c4a874710 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses. The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through. With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection. Instead, let's check the superblock
and dentry type.
Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes:
347c4a874710 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org> [3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Thu, 8 Dec 2022 11:55:48 +0000 (19:55 +0800)]
MAINTAINERS: update Muchun Song's email
I'm moving to the @linux.dev account. Map my old addresses and update it
to my new address.
Link: https://lkml.kernel.org/r/20221208115548.85244-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
John Starks [Wed, 7 Dec 2022 06:00:53 +0000 (22:00 -0800)]
mm/gup: fix gup_pud_range() for dax
For dax pud, pud_huge() returns true on x86. So the function works as long
as hugetlb is configured. However, dax doesn't depend on hugetlb.
Commit
414fd080d125 ("mm/gup: fix gup_pmd_range() for dax") fixed
devmap-backed huge PMDs, but missed devmap-backed huge PUDs. Fix this as
well.
This fixes the below kernel panic:
general protection fault, probably for non-canonical address 0x69e7c000cc478: 0000 [#1] SMP
< snip >
Call Trace:
<TASK>
get_user_pages_fast+0x1f/0x40
iov_iter_get_pages+0xc6/0x3b0
? mempool_alloc+0x5d/0x170
bio_iov_iter_get_pages+0x82/0x4e0
? bvec_alloc+0x91/0xc0
? bio_alloc_bioset+0x19a/0x2a0
blkdev_direct_IO+0x282/0x480
? __io_complete_rw_common+0xc0/0xc0
? filemap_range_has_page+0x82/0xc0
generic_file_direct_write+0x9d/0x1a0
? inode_update_time+0x24/0x30
__generic_file_write_iter+0xbd/0x1e0
blkdev_write_iter+0xb4/0x150
? io_import_iovec+0x8d/0x340
io_write+0xf9/0x300
io_issue_sqe+0x3c3/0x1d30
? sysvec_reschedule_ipi+0x6c/0x80
__io_queue_sqe+0x33/0x240
? fget+0x76/0xa0
io_submit_sqes+0xe6a/0x18d0
? __fget_light+0xd1/0x100
__x64_sys_io_uring_enter+0x199/0x880
? __context_tracking_enter+0x1f/0x70
? irqentry_exit_to_user_mode+0x24/0x30
? irqentry_exit+0x1d/0x30
? __context_tracking_exit+0xe/0x70
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fc97c11a7be
< snip >
</TASK>
---[ end trace
48b2e0e67debcaeb ]---
RIP: 0010:internal_get_user_pages_fast+0x340/0x990
< snip >
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
Link: https://lkml.kernel.org/r/1670392853-28252-1-git-send-email-ssengar@linux.microsoft.com
Fixes:
414fd080d125 ("mm/gup: fix gup_pmd_range() for dax")
Signed-off-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Mon, 5 Dec 2022 19:23:17 +0000 (19:23 +0000)]
mmap: fix do_brk_flags() modifying obviously incorrect VMAs
Add more sanity checks to the VMA that do_brk_flags() will expand. Ensure
the VMA matches basic merge requirements within the function before
calling can_vma_merge_after().
Drop the duplicate checks from vm_brk_flags() since they will be enforced
later.
The old code would expand file VMAs on brk(), which is functionally
wrong and also dangerous in terms of locking because the brk() path
isn't designed for file VMAs and therefore doesn't lock the file
mapping. Checking can_vma_merge_after() ensures that new anonymous
VMAs can't be merged into file VMAs.
See https://lore.kernel.org/linux-mm/CAG48ez1tJZTOjS_FjRZhvtDA-STFmdw8PEizPDwMGFd_ui0Nrw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20221205192304.1957418-1-Liam.Howlett@oracle.com
Fixes:
2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Mon, 5 Dec 2022 15:08:57 +0000 (16:08 +0100)]
mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit
We use "unsigned long" to store a PFN in the kernel and phys_addr_t to
store a physical address.
On a 64bit system, both are 64bit wide. However, on a 32bit system, the
latter might be 64bit wide. This is, for example, the case on x86 with
PAE: phys_addr_t and PTEs are 64bit wide, while "unsigned long" only spans
32bit.
The current definition of SWP_PFN_BITS without MAX_PHYSMEM_BITS misses
that case, and assumes that the maximum PFN is limited by an 32bit
phys_addr_t. This implies, that SWP_PFN_BITS will currently only be able
to cover 4 GiB - 1 on any 32bit system with 4k page size, which is wrong.
Let's rely on the number of bits in phys_addr_t instead, but make sure to
not exceed the maximum swap offset, to not make the BUILD_BUG_ON() in
is_pfn_swap_entry() unhappy. Note that swp_entry_t is effectively an
unsigned long and the maximum swap offset shares that value with the swap
type.
For example, on an 8 GiB x86 PAE system with a kernel config based on
Debian 11.5 (-> CONFIG_FLATMEM=y, CONFIG_X86_PAE=y), we will currently
fail removing migration entries (remove_migration_ptes()), because
mm/page_vma_mapped.c:check_pte() will fail to identify a PFN match as
swp_offset_pfn() wrongly masks off PFN bits. For example,
split_huge_page_to_list()->...->remap_page() will leave migration entries
in place and continue to unlock the page.
Later, when we stumble over these migration entries (e.g., via
/proc/self/pagemap), pfn_swap_entry_to_page() will BUG_ON() because these
migration entries shouldn't exist anymore and the page was unlocked.
[ 33.067591] kernel BUG at include/linux/swapops.h:497!
[ 33.067597] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 33.067602] CPU: 3 PID: 742 Comm: cow Tainted: G E 6.1.0-rc8+ #16
[ 33.067605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 33.067606] EIP: pagemap_pmd_range+0x644/0x650
[ 33.067612] Code: 00 00 00 00 66 90 89 ce b9 00 f0 ff ff e9 ff fb ff ff 89 d8 31 db e8 48 c6 52 00 e9 23 fb ff ff e8 61 83 56 00 e9 b6 fe ff ff <0f> 0b bf 00 f0 ff ff e9 38 fa ff ff 3e 8d 74 26 00 55 89 e5 57 31
[ 33.067615] EAX:
ee394000 EBX:
00000002 ECX:
ee394000 EDX:
00000000
[ 33.067617] ESI:
c1b0ded4 EDI:
00024a00 EBP:
c1b0ddb4 ESP:
c1b0dd68
[ 33.067619] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS:
00010246
[ 33.067624] CR0:
80050033 CR2:
b7a00000 CR3:
01bbbd20 CR4:
00350ef0
[ 33.067625] Call Trace:
[ 33.067628] ? madvise_free_pte_range+0x720/0x720
[ 33.067632] ? smaps_pte_range+0x4b0/0x4b0
[ 33.067634] walk_pgd_range+0x325/0x720
[ 33.067637] ? mt_find+0x1d6/0x3a0
[ 33.067641] ? mt_find+0x1d6/0x3a0
[ 33.067643] __walk_page_range+0x164/0x170
[ 33.067646] walk_page_range+0xf9/0x170
[ 33.067648] ? __kmem_cache_alloc_node+0x2a8/0x340
[ 33.067653] pagemap_read+0x124/0x280
[ 33.067658] ? default_llseek+0x101/0x160
[ 33.067662] ? smaps_account+0x1d0/0x1d0
[ 33.067664] vfs_read+0x90/0x290
[ 33.067667] ? do_madvise.part.0+0x24b/0x390
[ 33.067669] ? debug_smp_processor_id+0x12/0x20
[ 33.067673] ksys_pread64+0x58/0x90
[ 33.067675] __ia32_sys_ia32_pread64+0x1b/0x20
[ 33.067680] __do_fast_syscall_32+0x4c/0xc0
[ 33.067683] do_fast_syscall_32+0x29/0x60
[ 33.067686] do_SYSENTER_32+0x15/0x20
[ 33.067689] entry_SYSENTER_32+0x98/0xf1
Decrease the indentation level of SWP_PFN_BITS and SWP_PFN_MASK to keep it
readable and consistent.
[david@redhat.com: rely on sizeof(phys_addr_t) and min_t() instead]
Link: https://lkml.kernel.org/r/20221206105737.69478-1-david@redhat.com
[david@redhat.com: use "int" for comparison, as we're only comparing numbers < 64]
Link: https://lkml.kernel.org/r/1f157500-2676-7cef-a84e-9224ed64e540@redhat.com
Link: https://lkml.kernel.org/r/20221205150857.167583-1-david@redhat.com
Fixes:
0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugh Dickins [Mon, 5 Dec 2022 00:51:50 +0000 (16:51 -0800)]
tmpfs: fix data loss from failed fallocate
Fix tmpfs data loss when the fallocate system call is interrupted by a
signal, or fails for some other reason. The partial folio handling in
shmem_undo_range() forgot to consider this unfalloc case, and was liable
to erase or truncate out data which had already been committed earlier.
It turns out that none of the partial folio handling there is appropriate
for the unfalloc case, which just wants to proceed to removal of whole
folios: which find_get_entries() provides, even when partially covered.
Original patch by Rui Wang.
Link: https://lore.kernel.org/linux-mm/33b85d82.7764.1842e9ab207.Coremail.chenguoqic@163.com/
Link: https://lkml.kernel.org/r/a5dac112-cf4b-7af-a33-f386e347fd38@google.com
Fixes:
b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Guoqi Chen <chenguoqic@163.com>
Link: https://lore.kernel.org/all/20221101032248.819360-1-kernel@hev.cc/
Cc: Rui Wang <kernel@hev.cc>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Hocko [Fri, 2 Dec 2022 08:50:26 +0000 (09:50 +0100)]
kselftests: cgroup: update kmem test precision tolerance
1813e51eece0 ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed
the batch size while this test case has been left behind. This has led
to a test failure reported by test bot:
not ok 2 selftests: cgroup: test_kmem # exit=1
Update the tolerance for the pcp charges to reflect the
MEMCG_CHARGE_BATCH change to fix this.
[akpm@linux-foundation.org: update comments, per Roman]
Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz
Fixes:
1813e51eece0a ("memcg: increase MEMCG_CHARGE_BATCH to 64")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.com
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jason A. Donenfeld [Fri, 2 Dec 2022 16:27:24 +0000 (17:27 +0100)]
mm: do not BUG_ON missing brk mapping, because userspace can unmap it
The following program will trigger the BUG_ON that this patch removes,
because the user can munmap() mm->brk:
#include <sys/syscall.h>
#include <sys/mman.h>
#include <assert.h>
#include <unistd.h>
static void *brk_now(void)
{
return (void *)syscall(SYS_brk, 0);
}
static void brk_set(void *b)
{
assert(syscall(SYS_brk, b) != -1);
}
int main(int argc, char *argv[])
{
void *b = brk_now();
brk_set(b + 4096);
assert(munmap(b - 4096, 4096 * 2) == 0);
brk_set(b);
return 0;
}
Compile that with musl, since glibc actually uses brk(), and then
execute it, and it'll hit this splat:
kernel BUG at mm/mmap.c:229!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 12 PID: 1379 Comm: a.out Tainted: G S U 6.1.0-rc7+ #419
RIP: 0010:__do_sys_brk+0x2fc/0x340
Code: 00 00 4c 89 ef e8 04 d3 fe ff eb 9a be 01 00 00 00 4c 89 ff e8 35 e0 fe ff e9 6e ff ff ff 4d 89 a7 20>
RSP: 0018:
ffff888140bc7eb0 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
00000000007e7000 RCX:
ffff8881020fe000
RDX:
ffff8881020fe001 RSI:
ffff8881955c9b00 RDI:
ffff8881955c9b08
RBP:
0000000000000000 R08:
ffff8881955c9b00 R09:
00007ffc77844000
R10:
0000000000000000 R11:
0000000000000001 R12:
00000000007e8000
R13:
00000000007e8000 R14:
00000000007e7000 R15:
ffff8881020fe000
FS:
0000000000604298(0000) GS:
ffff88901f700000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000603fe0 CR3:
000000015ba9a005 CR4:
0000000000770ee0
PKRU:
55555554
Call Trace:
<TASK>
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x400678
Code: 10 4c 8d 41 08 4c 89 44 24 10 4c 8b 01 8b 4c 24 08 83 f9 2f 77 0a 4c 8d 4c 24 20 4c 01 c9 eb 05 48 8b>
RSP: 002b:
00007ffc77863890 EFLAGS:
00000212 ORIG_RAX:
000000000000000c
RAX:
ffffffffffffffda RBX:
000000000040031b RCX:
0000000000400678
RDX:
00000000004006a1 RSI:
00000000007e6000 RDI:
00000000007e7000
RBP:
00007ffc77863900 R08:
0000000000000000 R09:
00000000007e6000
R10:
00007ffc77863930 R11:
0000000000000212 R12:
00007ffc77863978
R13:
00007ffc77863988 R14:
0000000000000000 R15:
0000000000000000
</TASK>
Instead, just return the old brk value if the original mapping has been
removed.
[akpm@linux-foundation.org: fix changelog, per Liam]
Link: https://lkml.kernel.org/r/20221202162724.2009-1-Jason@zx2c4.com
Fixes:
2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matti Vaittinen [Thu, 1 Dec 2022 16:45:40 +0000 (18:45 +0200)]
mailmap: update Matti Vaittinen's email address
The email backend used by ROHM keeps labeling patches as spam. This can
result in missing the patches.
Switch my mail address from a company mail to a personal one.
Link: https://lkml.kernel.org/r/8f4498b66fedcbded37b3b87e0c516e659f8f583.1669912977.git.mazziesaccount@gmail.com
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Anup Patel <anup@brainfault.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ma Wupeng [Fri, 25 Nov 2022 06:54:44 +0000 (14:54 +0800)]
mm/memory-failure.c: cleanup in unpoison_memory
If freeit is true, the value of ret must be zero, there is no need to
check the value of freeit after label unlock_mutex.
We can drop variable freeit to do this cleanup.
Link: https://lkml.kernel.org/r/20221125065444.3462681-1-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 25 Nov 2022 18:58:57 +0000 (13:58 -0500)]
mm/thp: re-apply mkdirty for small pages after split
We used to have
624a2c94f5b7 (Partly revert "mm/thp: carry over dirty bit
when thp splits on pmd") fixing the regression reported here by Anatoly
Pugachev on sparc64:
https://lore.kernel.org/r/
20221021160603.GA23307@u164.east.ru
Where we temporarily ignored the dirty bit for small pages.
Then, Hev also reported similar issue on loongarch:
(the original mail was private, but Anatoly copied the list here)
https://lore.kernel.org/r/CADxRZqxqb7f_WhMh=jweZP+ynf_JwGd-0VwbYgp4P+T0-AXosw@mail.gmail.com
Hev pointed out that the issue is having HW write bit set within the
pte_mkdirty() so the split pte can be written after split even if e.g.
they were shared by more than one processes, causing data corrupt.
Hev also tried to explain why loongarch set HW write bit in mkdirty:
https://lore.kernel.org/r/CAHirt9itKO_K_HPboXh5AyJtt16Zf0cD73PtHvM=na39u_ztxA@mail.gmail.com
One way to fix it is as what Huacai proposed here for loongarch (then we
can re-apply the dirty bit in thp split):
https://lore.kernel.org/r/
20221117042532.4064448-1-chenhuacai@loongson.cnn
We may need similar thing for sparc64, though.
For now since we've found the root cause of the dirty bit issue the
simpler solution (which won't lose the dirty bit for small) that will work
for both is we wr-protect after pte_mkdirty(), so the HW write bit can be
persistent after thp split.
Add a comment for wrprotect, so we will not mess up the ordering later.
With
624a2c94f5b7 (Partly revert "mm/thp: carry over dirty bit when thp
splits on pmd") this is not a fix anymore, but just brings back the dirty
bit for thp split safely, so we re-apply the optimization but in safe way.
Provide a Tested-by credit to Hev too (not the exact same patch but the
same outcome) for loongarch.
Link: https://lkml.kernel.org/r/20221125185857.3110155-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Hev <r@hev.cc> # loongarch
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xu Panda [Thu, 24 Nov 2022 11:29:01 +0000 (19:29 +0800)]
mm: vmscan: use sysfs_emit() to instead of scnprintf()
Replace open-coded snprintf() with sysfs_emit() to simplify the code.
Link: https://lkml.kernel.org/r/202211241929015476424@zte.com.cn
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Anshuman Khandual [Fri, 25 Nov 2022 03:45:02 +0000 (09:15 +0530)]
s390/mm: use pmd_pgtable_page() helper in __gmap_segment_gaddr()
In __gmap_segment_gaddr() pmd level page table page is being extracted
from the pmd pointer, similar to pmd_pgtable_page() implementation. This
reduces some redundancy by directly using pmd_pgtable_page() instead,
though first making it available.
Link: https://lkml.kernel.org/r/20221125034502.1559986-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Anshuman Khandual [Thu, 24 Nov 2022 13:16:41 +0000 (18:46 +0530)]
mm/thp: rename pmd_to_page() as pmd_pgtable_page()
Current pmd_to_page(), which derives the page table page containing the
pmd address has a very misleading name. The problem being, it sounds
similar to pmd_page() which derives page embedded in a given pmd entry
either for next level page or a mapped huge page. Rename it as
pmd_pgtable_page() instead.
Link: https://lkml.kernel.org/r/20221124131641.1523772-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Tue, 22 Nov 2022 03:30:22 +0000 (12:30 +0900)]
zswap: do not allocate from atomic pool
zswap_frontswap_load() should be called from preemptible context (we even
call mutex_lock() there) and it does not look like we need to do
GFP_ATOMIC allocaion for temp buffer. The same applies to
zswap_writeback_entry().
Use GFP_KERNEL for temporary buffer allocation in both cases.
Link: https://lkml.kernel.org/r/Y3xCTr6ikbtcUr/y@google.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Anshuman Khandual [Wed, 23 Nov 2022 05:13:19 +0000 (10:43 +0530)]
documentation/mm: update pmd_present() in arch_pgtable_helpers.rst
Although pmd_present() might seem to indicate a valid and mapped pmd
entry, in reality it returns true when pmd_page() points to a valid page
in memory , regardless whether the pmd entry is mapped or not. Andrea
Arcangeli had earlier explained [1] the required semantics for
pmd_present(). This just updates the documentation for pmd_present() as
required.
[1] https://lore.kernel.org/lkml/
20181017020930.GN30832@redhat.com/
Link: https://lkml.kernel.org/r/20221123051319.1312582-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
NARIBAYASHI Akira [Wed, 26 Oct 2022 11:24:38 +0000 (20:24 +0900)]
mm, compaction: fix fast_isolate_around() to stay within boundaries
Depending on the memory configuration, isolate_freepages_block() may scan
pages out of the target range and causes panic.
Panic can occur on systems with multiple zones in a single pageblock.
The reason it is rare is that it only happens in special
configurations. Depending on how many similar systems there are, it
may be a good idea to fix this problem for older kernels as well.
The problem is that pfn as argument of fast_isolate_around() could be out
of the target range. Therefore we should consider the case where pfn <
start_pfn, and also the case where end_pfn < pfn.
This problem should have been addressd by the commit
6e2b7044c199 ("mm,
compaction: make fast_isolate_freepages() stay within zone") but there was
an oversight.
Case1: pfn < start_pfn
<at memory compaction for node Y>
| node X's zone | node Y's zone
+-----------------+------------------------------...
pageblock ^ ^ ^
+-----------+-----------+-----------+-----------+...
^ ^ ^
^ ^ end_pfn
^ start_pfn = cc->zone->zone_start_pfn
pfn
<---------> scanned range by "Scan After"
Case2: end_pfn < pfn
<at memory compaction for node X>
| node X's zone | node Y's zone
+-----------------+------------------------------...
pageblock ^ ^ ^
+-----------+-----------+-----------+-----------+...
^ ^ ^
^ ^ pfn
^ end_pfn
start_pfn
<---------> scanned range by "Scan Before"
It seems that there is no good reason to skip nr_isolated pages just after
given pfn. So let perform simple scan from start to end instead of
dividing the scan into "Before" and "After".
Link: https://lkml.kernel.org/r/20221026112438.236336-1-a.naribayashi@fujitsu.com
Fixes:
6e2b7044c199 ("mm, compaction: make fast_isolate_freepages() stay within zone").
Signed-off-by: NARIBAYASHI Akira <a.naribayashi@fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:15 +0000 (16:52 -0800)]
mm: document /sys/class/bdi/<bdi>/min_ratio_fine knob
This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-21-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:14 +0000 (16:52 -0800)]
mm: add /sys/class/bdi/<bdi>/min_ratio_fine knob
This adds the min_ratio_fine knob. The knob specifies the values not
based on 1 of 100, but instead 1 per million.
Link: https://lkml.kernel.org/r/20221119005215.3052436-20-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:13 +0000 (16:52 -0800)]
mm: add bdi_set_min_ratio_no_scale() function
This introduces bdi_set_min_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
min_ratio_fine.
Link: https://lkml.kernel.org/r/20221119005215.3052436-19-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:12 +0000 (16:52 -0800)]
mm: document /sys/class/bdi/<bdi>/max_ratio_fine knob
This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-18-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:11 +0000 (16:52 -0800)]
mm: add /sys/class/bdi/<bdi>/max_ratio_fine knob
This adds the max_ratio_fine knob. The knob specifies the values not
based on 1 of 100, but instead 1 per million.
Link: https://lkml.kernel.org/r/20221119005215.3052436-17-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:10 +0000 (16:52 -0800)]
mm: add bdi_set_max_ratio_no_scale() function
This introduces bdi_set_max_ratio_no_scale(). It uses the max
granularity for the ratio. This function by the new sysfs knob
max_ratio_fine.
Link: https://lkml.kernel.org/r/20221119005215.3052436-16-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:09 +0000 (16:52 -0800)]
mm: document /sys/class/bdi/<bdi>/min_bytes knob
This documents the new /sys/class/bdi/<bdi>/min_bytes knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-15-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:08 +0000 (16:52 -0800)]
mm: add /sys/class/bdi/<bdi>/min_bytes knob
bdi has two existing knobs to limit the amount of dirty memory:
min_ratio and max_ratio. However the granularity of the knobs is limited
and often it is more convenient to specify limits in terms of bytes.
This change adds the min_bytes knob.
It does not store the min_bytes value, instead it converts the max_bytes
value to a ratio. The value is therefore more an approximation than an
absolute value.
It also maintains the sum over all the bdi min_ratio values stored in
the variable bdi_min_ratio.
Link: https://lkml.kernel.org/r/20221119005215.3052436-14-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:07 +0000 (16:52 -0800)]
mm: add bdi_set_min_bytes() function
This introduces the bdi_set_min_bytes() function. The min_bytes function
does not store the min_bytes value. Instead it converts the min_bytes
value into the corresponding ratio value.
Link: https://lkml.kernel.org/r/20221119005215.3052436-13-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:06 +0000 (16:52 -0800)]
mm: split off __bdi_set_min_ratio() function
This splits off the __bdi_set_min_ratio() function from the
bdi_set_min_ratio() function. The __bdi_set_min_ratio() function will
also be called from the bdi_set_min_bytes() function, which will be
introduced in the next patch.
Link: https://lkml.kernel.org/r/20221119005215.3052436-12-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:05 +0000 (16:52 -0800)]
mm: add bdi_get_min_bytes() function
This adds a function to return the specified value for min_bytes. It
converts the stored min_ratio of the bdi to the corresponding bytes
value. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The returned
value can be different than the value when the min_bytes value was set.
Link: https://lkml.kernel.org/r/20221119005215.3052436-11-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:04 +0000 (16:52 -0800)]
mm: document /sys/class/bdi/<bdi>/max_bytes knob
This documents the new /sys/class/bdi/<bdi>/max_bytes knob.
Link: https://lkml.kernel.org/r/20221119005215.3052436-10-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:03 +0000 (16:52 -0800)]
mm: add knob /sys/class/bdi/<bdi>/max_bytes
This adds the new knob max_bytes to specify a dirty memory limit for the
corresponding bdi. The specified bytes value is converted to a ratio.
Link: https://lkml.kernel.org/r/20221119005215.3052436-9-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:02 +0000 (16:52 -0800)]
mm: add bdi_set_max_bytes() function
This introduces the bdi_set_max_bytes() function. The max_bytes function
does not store the max_bytes value. Instead it converts the max_bytes
value into the corresponding ratio value.
Link: https://lkml.kernel.org/r/20221119005215.3052436-8-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:01 +0000 (16:52 -0800)]
mm: split off __bdi_set_max_ratio() function
This splits off __bdi_set_max_ratio() from bdi_set_max_ratio().
__bdi_set_max_ratio() will also be called from bdi_set_max_bytes(),
which will be introduced in the next patch.
Link: https://lkml.kernel.org/r/20221119005215.3052436-7-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:52:00 +0000 (16:52 -0800)]
mm: add bdi_get_max_bytes() function
This adds a function to return the specified value for max_bytes. It
converts the stored max_ratio of the bdi to the corresponding bytes
value. It introduces the bdi_get_bytes helper function to do the
conversion. This is an approximation as it is based on the value that is
returned by global_dirty_limits(), which can change. The helper function
will also be used by the min_bytes bdi knob.
Link: https://lkml.kernel.org/r/20221119005215.3052436-6-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:51:59 +0000 (16:51 -0800)]
mm: use part per 1000000 for bdi ratios
To get finer granularity for ratio calculations use part per million
instead of percentiles. This is especially important if we want to
automatically convert byte values to ratios. Otherwise the values that
are actually used can be quite different. This is also important for
machines with more main memory (1% of 256GB is already 2.5GB).
Link: https://lkml.kernel.org/r/20221119005215.3052436-5-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:51:58 +0000 (16:51 -0800)]
mm: document /sys/class/bdi/<bdi>/strict_limit knob
This documents the new /sys/class/bdi/<bdi>/strict_limit knob.
Link: https://lkml.kernel.org/r/20221119005215.3052436-4-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:51:57 +0000 (16:51 -0800)]
mm: add knob /sys/class/bdi/<bdi>/strict_limit
Add a new knob to /sys/class/bdi/<bdi>/strict_limit. This new knob
allows to set/unset the flag BDI_CAP_STRICTLIMIT in the bdi
capabilities.
Link: https://lkml.kernel.org/r/20221119005215.3052436-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefan Roesch [Sat, 19 Nov 2022 00:51:56 +0000 (16:51 -0800)]
mm: add bdi_set_strict_limit() function
Patch series "mm/block: add bdi sysfs knobs", v4.
At meta network block devices (nbd) are used to implement remote block
storage. In testing and during production it has been observed that these
network block devices can consume a huge portion of the dirty writeback
cache and writeback can take a considerable time.
To be able to give stricter limits, I'm proposing the following changes:
1) introduce strictlimit knob
Currently the max_ratio knob exists to limit the dirty_memory. However
this knob only applies once (dirty_ratio + dirty_background_ratio) / 2
has been reached.
With the BDI_CAP_STRICTLIMIT flag, the max_ratio can be applied without
reaching that limit. This change exposes that knob.
This knob can also be useful for NFS, fuse filesystems and USB devices.
2) Use part of 1000000 internal calculation
The max_ratio is based on percentage. With the current machine sizes
percentage values can be very high (1% of a 256GB main memory is already
2.5GB). This change uses part of 1000000 instead of percentages for the
internal calculations.
3) Introduce two new sysfs knobs: min_bytes and max_bytes.
Currently all calculations are based on ratio, but for a user it often
more convenient to specify a limit in bytes. The new knobs will not
store bytes values, instead they will translate the byte value to a
corresponding ratio. As the internal values are now part of 1000, the
ratio is closer to the specified value. However the value should be more
seen as an approximation as it can fluctuate over time.
3) Introduce two new sysfs knobs: min_ratio_fine and max_ratio_fine.
The granularity for the existing sysfs bdi knobs min_ratio and max_ratio
is based on percentage values. The new sysfs bdi knobs min_ratio_fine
and max_ratio_fine allow to specify the ratio as part of 1 million.
This patch (of 20):
This adds the bdi_set_strict_limit function to be able to set/unset the
BDI_CAP_STRICTLIMIT flag.
Link: https://lkml.kernel.org/r/20221119005215.3052436-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20221119005215.3052436-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chris Mason <clm@meta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Randy Dunlap [Sat, 19 Nov 2022 05:51:17 +0000 (21:51 -0800)]
maple_tree: allow TEST_MAPLE_TREE only when DEBUG_KERNEL is set
Prevent a kconfig warning that is caused by TEST_MAPLE_TREE by adding a
"depends on" clause for TEST_MAPLE_TREE since 'select' does not follow any
kconfig dependencies.
WARNING: unmet direct dependencies detected for DEBUG_MAPLE_TREE
Depends on [n]: DEBUG_KERNEL [=n]
Selected by [y]:
- TEST_MAPLE_TREE [=y] && RUNTIME_TESTING_MENU [=y]
Link: https://lkml.kernel.org/r/20221119055117.14094-1-rdunlap@infradead.org
Fixes:
120b116208a0 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Potapenko [Thu, 10 Nov 2022 11:35:41 +0000 (12:35 +0100)]
Revert "kmsan: unpoison @tlb in arch_tlb_gather_mmu()"
This reverts commit
ac801e7e252c5588325e3c983c7d4167fc68c024.
The patch in question was picked to -mm from the KMSAN v6 patch series
(https://lore.kernel.org/linux-mm/
20220905122452.2258262-1-glider@google.com/)
and sneaked into mainline despite its removal from the v7 series
(https://lore.kernel.org/linux-mm/
20220915150417.722975-1-glider@google.com/)
Currently KMSAN does not warn about origin chains hitting the maximum
depth, so keeping @tlb poisoned won't result in any inconveniences.
Link: https://lkml.kernel.org/r/20221110113541.1844156-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Fri, 18 Nov 2022 07:30:55 +0000 (23:30 -0800)]
folio-compat: remove try_to_release_page()
There are no more callers of try_to_release_page(), so remove it. This
saves 85 bytes of kernel text.
Link: https://lkml.kernel.org/r/20221118073055.55694-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Fri, 18 Nov 2022 07:30:54 +0000 (23:30 -0800)]
memory-failure: convert truncate_error_page() to use folio
Replace try_to_release_page() with filemap_release_folio(). This change
is in preparation for the removal of the try_to_release_page() wrapper.
Link: https://lkml.kernel.org/r/20221118073055.55694-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Fri, 18 Nov 2022 07:30:53 +0000 (23:30 -0800)]
khugepage: replace try_to_release_page() with filemap_release_folio()
Replace some calls with their folio equivalents. This change removes 4
calls to compound_head() and is in preparation for the removal of the
try_to_release_page() wrapper.
Link: https://lkml.kernel.org/r/20221118073055.55694-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vishal Moola (Oracle) [Fri, 18 Nov 2022 07:30:52 +0000 (23:30 -0800)]
ext4: convert move_extent_per_page() to use folios
Patch series "Removing the try_to_release_page() wrapper", v3.
This patchset replaces the remaining calls of try_to_release_page() with
the folio equivalent: filemap_release_folio(). This allows us to remove
the wrapper.
This patch (of 4):
Convert move_extent_per_page() to use folios. This change removes 5 calls
to compound_head() and is in preparation for the removal of the
try_to_release_page() wrapper.
Link: https://lkml.kernel.org/r/20221118073055.55694-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20221118073055.55694-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Tue, 22 Nov 2022 13:12:29 +0000 (13:12 +0000)]
mm/page_alloc: simplify locking during free_unref_page_list
While freeing a large list, the zone lock will be released and reacquired
to avoid long hold times since commit
c24ad77d962c ("mm/page_alloc.c:
avoid excessive IRQ disabled times in free_unref_page_list()"). As
suggested by Vlastimil Babka, the lockrelease/reacquire logic can be
simplified by reusing the logic that acquires a different lock when
changing zones.
Link: https://lkml.kernel.org/r/20221122131229.5263-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Fri, 18 Nov 2022 10:17:14 +0000 (10:17 +0000)]
mm/page_alloc: leave IRQs enabled for per-cpu page allocations
The pcp_spin_lock_irqsave protecting the PCP lists is IRQ-safe as a task
allocating from the PCP must not re-enter the allocator from IRQ context.
In each instance where IRQ-reentrancy is possible, the lock is acquired
using pcp_spin_trylock_irqsave() even though IRQs are disabled and
re-entrancy is impossible.
Demote the lock to pcp_spin_lock avoids an IRQ disable/enable in the
common case at the cost of some IRQ allocations taking a slower path. If
the PCP lists need to be refilled, the zone lock still needs to disable
IRQs but that will only happen on PCP refill and drain. If an IRQ is
raised when a PCP allocation is in progress, the trylock will fail and
fallback to using the buddy lists directly. Note that this may not be a
universal win if an interrupt-intensive workload also allocates heavily
from interrupt context and contends heavily on the zone->lock as a result.
[mgorman@techsingularity.net: migratetype might be wrong if a PCP was locked]
Link: https://lkml.kernel.org/r/20221122131229.5263-2-mgorman@techsingularity.net
[yuzhao@google.com: reported lockdep issue on IO completion from softirq]
[hughd@google.com: fix list corruption, lock improvements, micro-optimsations]
Link: https://lkml.kernel.org/r/20221118101714.19590-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Fri, 18 Nov 2022 10:17:13 +0000 (10:17 +0000)]
mm/page_alloc: always remove pages from temporary list
Patch series "Leave IRQs enabled for per-cpu page allocations", v3.
This patch (of 2):
free_unref_page_list() has neglected to remove pages properly from the
list of pages to free since forever. It works by coincidence because
list_add happened to do the right thing adding the pages to just the PCP
lists. However, a later patch added pages to either the PCP list or the
zone list but only properly deleted the page from the list in one path
leading to list corruption and a subsequent failure. As a preparation
patch, always delete the pages from one list properly before adding to
another. On its own, this fixes nothing although it adds a fractional
amount of overhead but is critical to the next patch.
Link: https://lkml.kernel.org/r/20221118101714.19590-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20221118101714.19590-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Thu, 17 Nov 2022 21:29:15 +0000 (16:29 -0500)]
selftests/vm: use memfd for hugepage-mmap test
This test was overlooked with a hard-coded mntpoint path in test when
we're removing the hugetlb mntpoint in commit
0796c7b8be84. Fix it up so
the test can keep running.
Link: https://lkml.kernel.org/r/Y3aojfUC2nSwbCzB@x1n
Fixes:
0796c7b8be84 ("selftests/vm: drop mnt point for hugetlb in run_vmtests.sh")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Thu, 17 Nov 2022 14:13:26 +0000 (23:13 +0900)]
zram: remove unused stats fields
We don't show num_reads and num_writes since we removed corresponding
sysfs nodes in 2017. Block layer stats are exposed via
/sys/block/zramX/stat file.
However, we still increment those atomic vars and store them in zram
stats. Remove leftovers.
Link: https://lkml.kernel.org/r/20221117141326.1105181-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yang Li [Wed, 16 Nov 2022 01:23:45 +0000 (09:23 +0800)]
mm/migrate.c: stop using 0 as NULL pointer
mm/migrate.c:1198:24: warning: Using plain integer as NULL pointer
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3080
Link: https://lkml.kernel.org/r/20221116012345.84870-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yu Zhao [Wed, 16 Nov 2022 01:38:08 +0000 (18:38 -0700)]
mm: multi-gen LRU: remove NULL checks on NODE_DATA()
NODE_DATA() is preallocated for all possible nodes after commit
09f49dca570a ("mm: handle uninitialized numa nodes gracefully"). Checking
its return value against NULL is now unnecessary.
Link: https://lkml.kernel.org/r/20221116013808.3995280-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Mon, 31 Oct 2022 15:25:24 +0000 (16:25 +0100)]
mm/gup: disallow FOLL_FORCE|FOLL_WRITE on hugetlb mappings
hugetlb does not support fake write-faults (write faults without write
permissions). However, we are currently able to trigger a
FAULT_FLAG_WRITE fault on a VMA without VM_WRITE.
If we'd ever want to support FOLL_FORCE|FOLL_WRITE, we'd have to teach
hugetlb to:
(1) Leave the page mapped R/O after the fake write-fault, like
maybe_mkwrite() does.
(2) Allow writing to an exclusive anon page that's mapped R/O when
FOLL_FORCE is set, like can_follow_write_pte(). E.g.,
__follow_hugetlb_must_fault() needs adjustment.
For now, it's not clear if that added complexity is really required.
History tolds us that FOLL_FORCE is dangerous and that we better limit its
use to a bare minimum.
--------------------------------------------------------------------------
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <stdint.h>
#include <sys/mman.h>
#include <linux/mman.h>
int main(int argc, char **argv)
{
char *map;
int mem_fd;
map = mmap(NULL, 2 * 1024 * 1024u, PROT_READ,
MAP_PRIVATE|MAP_ANON|MAP_HUGETLB|MAP_HUGE_2MB, -1, 0);
if (map == MAP_FAILED) {
fprintf(stderr, "mmap() failed: %d\n", errno);
return 1;
}
mem_fd = open("/proc/self/mem", O_RDWR);
if (mem_fd < 0) {
fprintf(stderr, "open(/proc/self/mem) failed: %d\n", errno);
return 1;
}
if (pwrite(mem_fd, "0", 1, (uintptr_t) map) == 1) {
fprintf(stderr, "write() succeeded, which is unexpected\n");
return 1;
}
printf("write() failed as expected: %d\n", errno);
return 0;
}
--------------------------------------------------------------------------
Fortunately, we have a sanity check in hugetlb_wp() in place ever since
commit
1d8d14641fd9 ("mm/hugetlb: support write-faults in shared
mappings"), that bails out instead of silently mapping a page writable in
a !PROT_WRITE VMA.
Consequently, above reproducer triggers a warning, similar to the one
reported by szsbot:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 3612 at mm/hugetlb.c:5313 hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313
Modules linked in:
CPU: 1 PID: 3612 Comm: syz-executor250 Not tainted 6.1.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313
Code: ea 03 80 3c 02 00 0f 85 31 14 00 00 49 8b 5f 20 31 ff 48 89 dd 83 e5 02 48 89 ee e8 70 ab b7 ff 48 85 ed 75 5b e8 76 ae b7 ff <0f> 0b 41 bd 40 00 00 00 e8 69 ae b7 ff 48 b8 00 00 00 00 00 fc ff
RSP: 0018:
ffffc90003caf620 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
0000000008640070 RCX:
0000000000000000
RDX:
ffff88807b963a80 RSI:
ffffffff81c4ed2a RDI:
0000000000000007
RBP:
0000000000000000 R08:
0000000000000007 R09:
0000000000000000
R10:
0000000000000000 R11:
000000000008c07e R12:
ffff888023805800
R13:
0000000000000000 R14:
ffffffff91217f38 R15:
ffff88801d4b0360
FS:
0000555555bba300(0000) GS:
ffff8880b9b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fff7a47a1b8 CR3:
000000002378d000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
hugetlb_no_page mm/hugetlb.c:5755 [inline]
hugetlb_fault+0x19cc/0x2060 mm/hugetlb.c:5874
follow_hugetlb_page+0x3f3/0x1850 mm/hugetlb.c:6301
__get_user_pages+0x2cb/0xf10 mm/gup.c:1202
__get_user_pages_locked mm/gup.c:1434 [inline]
__get_user_pages_remote+0x18f/0x830 mm/gup.c:2187
get_user_pages_remote+0x84/0xc0 mm/gup.c:2260
__access_remote_vm+0x287/0x6b0 mm/memory.c:5517
ptrace_access_vm+0x181/0x1d0 kernel/ptrace.c:61
generic_ptrace_pokedata kernel/ptrace.c:1323 [inline]
ptrace_request+0xb46/0x10c0 kernel/ptrace.c:1046
arch_ptrace+0x36/0x510 arch/x86/kernel/ptrace.c:828
__do_sys_ptrace kernel/ptrace.c:1296 [inline]
__se_sys_ptrace kernel/ptrace.c:1269 [inline]
__x64_sys_ptrace+0x178/0x2a0 kernel/ptrace.c:1269
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
So let's silence that warning by teaching GUP code that FOLL_FORCE -- so
far -- does not apply to hugetlb.
Note that FOLL_FORCE for read-access seems to be working as expected. The
assumption is that this has been broken forever, only ever since above
commit, we actually detect the wrong handling and WARN_ON_ONCE().
I assume this has been broken at least since 2014, when mm/gup.c came to
life. I failed to come up with a suitable Fixes tag quickly.
Link: https://lkml.kernel.org/r/20221031152524.173644-1-david@redhat.com
Fixes:
1d8d14641fd9 ("mm/hugetlb: support write-faults in shared mappings")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: <syzbot+f0b97304ef90f0d0b1dc@syzkaller.appspotmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:58 +0000 (11:26 +0100)]
habanalabs: remove FOLL_FORCE usage
FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages
using unpin_user_pages_dirty_lock(true), the assumption is that all these
pages are writable.
FOLL_FORCE in this case seems to be due to copy-and-past from other
drivers. Let's just remove it.
Link: https://lkml.kernel.org/r/20221116102659.70287-20-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oded Gabbay <ogabbay@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:57 +0000 (11:26 +0100)]
RDMA/hw/qib/qib_user_pages: remove FOLL_FORCE usage
FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages
using unpin_user_pages_dirty_lock(true), the assumption is that all these
pages are writable.
FOLL_FORCE in this case seems to be a legacy leftover. Let's just remove
it.
Link: https://lkml.kernel.org/r/20221116102659.70287-19-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:56 +0000 (11:26 +0100)]
drm/exynos: remove FOLL_FORCE usage
FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages
using unpin_user_pages_dirty_lock(true), the assumption is that all these
pages are writable.
FOLL_FORCE in this case seems to be a legacy leftover. Let's just remove
it.
Link: https://lkml.kernel.org/r/20221116102659.70287-18-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:55 +0000 (11:26 +0100)]
mm/frame-vector: remove FOLL_FORCE usage
FOLL_FORCE is really only for ptrace access. According to commit
707947247e95 ("media: videobuf2-vmalloc: get_userptr: buffers are always
writable"), get_vaddr_frames() currently pins all pages writable as a
workaround for issues with read-only buffers.
FOLL_FORCE, however, seems to be a legacy leftover as it predates
commit
707947247e95 ("media: videobuf2-vmalloc: get_userptr: buffers are
always writable"). Let's just remove it.
Once the read-only buffer issue has been resolved, FOLL_WRITE could
again be set depending on the DMA direction.
Link: https://lkml.kernel.org/r/20221116102659.70287-17-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:54 +0000 (11:26 +0100)]
media: pci/ivtv: remove FOLL_FORCE usage
FOLL_FORCE is really only for ptrace access. R/O pinning a page is
supposed to fail if the VMA misses proper access permissions (no VM_READ).
Let's just remove FOLL_FORCE usage here; there would have to be a pretty
good reason to allow arbitrary drivers to R/O pin pages in a PROT_NONE
VMA. Most probably, FOLL_FORCE usage is just some legacy leftover.
Link: https://lkml.kernel.org/r/20221116102659.70287-16-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:53 +0000 (11:26 +0100)]
drm/etnaviv: remove FOLL_FORCE usage
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
commit
cd5297b0855f ("drm/etnaviv: Use FOLL_FORCE for userptr")
documents that FOLL_FORCE | FOLL_WRITE was really only used for reliable
R/O pinning.
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:52 +0000 (11:26 +0100)]
media: videobuf-dma-sg: remove FOLL_FORCE usage
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-14-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:51 +0000 (11:26 +0100)]
RDMA/siw: remove FOLL_FORCE usage
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:50 +0000 (11:26 +0100)]
RDMA/usnic: remove FOLL_FORCE usage
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Nelson Escobar <neescoba@cisco.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:49 +0000 (11:26 +0100)]
RDMA/umem: remove FOLL_FORCE usage
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-11-david@redhat.com
Tested-by: Leon Romanovsky <leonro@nvidia.com> [over mlx4 and mlx5]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:48 +0000 (11:26 +0100)]
mm/gup: reliable R/O long-term pinning in COW mappings
We already support reliable R/O pinning of anonymous memory. However,
assume we end up pinning (R/O long-term) a pagecache page or the shared
zeropage inside a writable private ("COW") mapping. The next write access
will trigger a write-fault and replace the pinned page by an exclusive
anonymous page in the process page tables to break COW: the pinned page no
longer corresponds to the page mapped into the process' page table.
Now that FAULT_FLAG_UNSHARE can break COW on anything mapped into a
COW mapping, let's properly break COW first before R/O long-term
pinning something that's not an exclusive anon page inside a COW
mapping. FAULT_FLAG_UNSHARE will break COW and map an exclusive anon page
instead that can get pinned safely.
With this change, we can stop using FOLL_FORCE|FOLL_WRITE for reliable
R/O long-term pinning in COW mappings.
With this change, the new R/O long-term pinning tests for non-anonymous
memory succeed:
# [RUN] R/O longterm GUP pin ... with shared zeropage
ok 151 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd
ok 152 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with tmpfile
ok 153 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with huge zeropage
ok 154 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (2048 kB)
ok 155 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (1048576 kB)
ok 156 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with shared zeropage
ok 157 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd
ok 158 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with tmpfile
ok 159 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with huge zeropage
ok 160 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (2048 kB)
ok 161 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (1048576 kB)
ok 162 Longterm R/O pin is reliable
Note 1: We don't care about short-term R/O-pinning, because they have
snapshot semantics: they are not supposed to observe modifications that
happen after pinning.
As one example, assume we start direct I/O to read from a page and store
page content into a file: modifications to page content after starting
direct I/O are not guaranteed to end up in the file. So even if we'd pin
the shared zeropage, the end result would be as expected -- getting zeroes
stored to the file.
Note 2: For shared mappings we'll now always fallback to the slow path to
lookup the VMA when R/O long-term pining. While that's the necessary price
we have to pay right now, it's actually not that bad in practice: most
FOLL_LONGTERM users already specify FOLL_WRITE, for example, along with
FOLL_FORCE because they tried dealing with COW mappings correctly ...
Note 3: For users that use FOLL_LONGTERM right now without FOLL_WRITE,
such as VFIO, we'd now no longer pin the shared zeropage. Instead, we'd
populate exclusive anon pages that we can pin. There was a concern that
this could affect the memlock limit of existing setups.
For example, a VM running with VFIO could run into the memlock limit and
fail to run. However, we essentially had the same behavior already in
commit
17839856fd58 ("gup: document and work around "COW can break either
way" issue") which got merged into some enterprise distros, and there were
not any such complaints. So most probably, we're fine.
Link: https://lkml.kernel.org/r/20221116102659.70287-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:47 +0000 (11:26 +0100)]
mm: extend FAULT_FLAG_UNSHARE support to anything in a COW mapping
Extend FAULT_FLAG_UNSHARE to break COW on anything mapped into a
COW (i.e., private writable) mapping and adjust the documentation
accordingly.
FAULT_FLAG_UNSHARE will now also break COW when encountering the shared
zeropage, a pagecache page, a PFNMAP, ... inside a COW mapping, by
properly replacing the mapped page/pfn by a private copy (an exclusive
anonymous page).
Note that only do_wp_page() needs care: hugetlb_wp() already handles
FAULT_FLAG_UNSHARE correctly. wp_huge_pmd()/wp_huge_pud() also handles it
correctly, for example, splitting the huge zeropage on FAULT_FLAG_UNSHARE
such that we can handle FAULT_FLAG_UNSHARE on the PTE level.
This change is a requirement for reliable long-term R/O pinning in
COW mappings.
Link: https://lkml.kernel.org/r/20221116102659.70287-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:46 +0000 (11:26 +0100)]
mm: don't call vm_ops->huge_fault() in wp_huge_pmd()/wp_huge_pud() for private mappings
If we already have a PMD/PUD mapped write-protected in a private mapping
and we want to break COW either due to FAULT_FLAG_WRITE or
FAULT_FLAG_UNSHARE, there is no need to inform the file system just like on
the PTE path.
Let's just split (->zap) + fallback in that case.
This is a preparation for more generic FAULT_FLAG_UNSHARE support in
COW mappings.
Link: https://lkml.kernel.org/r/20221116102659.70287-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:45 +0000 (11:26 +0100)]
mm: rework handling in do_wp_page() based on private vs. shared mappings
We want to extent FAULT_FLAG_UNSHARE support to anything mapped into a
COW mapping (pagecache page, zeropage, PFN, ...), not just anonymous pages.
Let's prepare for that by handling shared mappings first such that we can
handle private mappings last.
While at it, use folio-based functions instead of page-based functions
where we touch the code either way.
Link: https://lkml.kernel.org/r/20221116102659.70287-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:44 +0000 (11:26 +0100)]
mm: add early FAULT_FLAG_WRITE consistency checks
Let's catch abuse of FAULT_FLAG_WRITE early, such that we don't have to
care in all other handlers and might get "surprises" if we forget to do
so.
Write faults without VM_MAYWRITE don't make any sense, and our
maybe_mkwrite() logic could have hidden such abuse for now.
Write faults without VM_WRITE on something that is not a COW mapping is
similarly broken, and e.g., do_wp_page() could end up placing an
anonymous page into a shared mapping, which would be bad.
This is a preparation for reliable R/O long-term pinning of pages in
private mappings, whereby we want to make sure that we will never break
COW in a read-only private mapping.
Link: https://lkml.kernel.org/r/20221116102659.70287-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:43 +0000 (11:26 +0100)]
mm: add early FAULT_FLAG_UNSHARE consistency checks
For now, FAULT_FLAG_UNSHARE only applies to anonymous pages, which
implies a COW mapping. Let's hide FAULT_FLAG_UNSHARE early if we're not
dealing with a COW mapping, such that we treat it like a read fault as
documented and don't have to worry about the flag throughout all fault
handlers.
While at it, centralize the check for mutual exclusion of
FAULT_FLAG_UNSHARE and FAULT_FLAG_WRITE and just drop the check that
either flag is set in the WP handler.
Link: https://lkml.kernel.org/r/20221116102659.70287-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:42 +0000 (11:26 +0100)]
selftests/vm: cow: R/O long-term pinning reliability tests for non-anon pages
Let's test whether R/O long-term pinning is reliable for non-anonymous
memory: when R/O long-term pinning a page, the expectation is that we
break COW early before pinning, such that actual write access via the
page tables won't break COW later and end up replacing the R/O-pinned
page in the page table.
Consequently, R/O long-term pinning in private mappings would only target
exclusive anonymous pages.
For now, all tests fail:
# [RUN] R/O longterm GUP pin ... with shared zeropage
not ok 151 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd
not ok 152 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with tmpfile
not ok 153 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with huge zeropage
not ok 154 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (2048 kB)
not ok 155 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP pin ... with memfd hugetlb (1048576 kB)
not ok 156 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with shared zeropage
not ok 157 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd
not ok 158 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with tmpfile
not ok 159 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with huge zeropage
not ok 160 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (2048 kB)
not ok 161 Longterm R/O pin is reliable
# [RUN] R/O longterm GUP-fast pin ... with memfd hugetlb (1048576 kB)
not ok 162 Longterm R/O pin is reliable
Link: https://lkml.kernel.org/r/20221116102659.70287-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:41 +0000 (11:26 +0100)]
selftests/vm: cow: basic COW tests for non-anonymous pages
Let's add basic tests for COW with non-anonymous pages in private
mappings: write access should properly trigger COW and result in the
private changes not being visible through other page mappings.
Especially, add tests for:
* Zeropage
* Huge zeropage
* Ordinary pagecache pages via memfd and tmpfile()
* Hugetlb pages via memfd
Fortunately, all tests pass.
Link: https://lkml.kernel.org/r/20221116102659.70287-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Hildenbrand [Wed, 16 Nov 2022 10:26:40 +0000 (11:26 +0100)]
selftests/vm: anon_cow: prepare for non-anonymous COW tests
Patch series "mm/gup: remove FOLL_FORCE usage from drivers (reliable R/O
long-term pinning)".
For now, we did not support reliable R/O long-term pinning in COW
mappings. That means, if we would trigger R/O long-term pinning in
MAP_PRIVATE mapping, we could end up pinning the (R/O-mapped) shared
zeropage or a pagecache page.
The next write access would trigger a write fault and replace the pinned
page by an exclusive anonymous page in the process page table; whatever
the process would write to that private page copy would not be visible by
the owner of the previous page pin: for example, RDMA could read stale
data. The end result is essentially an unexpected and hard-to-debug
memory corruption.
Some drivers tried working around that limitation by using
"FOLL_FORCE|FOLL_WRITE|FOLL_LONGTERM" for R/O long-term pinning for now.
FOLL_WRITE would trigger a write fault, if required, and break COW before
pinning the page. FOLL_FORCE is required because the VMA might lack write
permissions, and drivers wanted to make that working as well, just like
one would expect (no write access, but still triggering a write access to
break COW).
However, that is not a practical solution, because
(1) Drivers that don't stick to that undocumented and debatable pattern
would still run into that issue. For example, VFIO only uses
FOLL_LONGTERM for R/O long-term pinning.
(2) Using FOLL_WRITE just to work around a COW mapping + page pinning
limitation is unintuitive. FOLL_WRITE would, for example, mark the
page softdirty or trigger uffd-wp, even though, there actually isn't
going to be any write access.
(3) The purpose of FOLL_FORCE is debug access, not access without lack of
VMA permissions by arbitrarty drivers.
So instead, make R/O long-term pinning work as expected, by breaking COW
in a COW mapping early, such that we can remove any FOLL_FORCE usage from
drivers and make FOLL_FORCE ptrace-specific (renaming it to FOLL_PTRACE).
More details in patch #8.
This patch (of 19):
Originally, the plan was to have a separate tests for testing COW of
non-anonymous (e.g., shared zeropage) pages.
Turns out, that we'd need a lot of similar functionality and that there
isn't a really good reason to separate it. So let's prepare for non-anon
tests by renaming to "cow".
Link: https://lkml.kernel.org/r/20221116102659.70287-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221116102659.70287-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Benvenuti <benve@cisco.com>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nelson Escobar <neescoba@cisco.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lukas Bulwahn [Wed, 16 Nov 2022 13:19:22 +0000 (14:19 +0100)]
mm: Kconfig: make config SECRETMEM visible with EXPERT
Commit
6a108a14fa35 ("kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT")
introduces CONFIG_EXPERT to carry the previous intent of CONFIG_EMBEDDED
and just gives that intent a much better name. That has been clearly a
good and long overdue renaming, and it is clearly an improvement to the
kernel build configuration that has shown to help managing the kernel
build configuration in the last decade.
However, rather than bravely and radically just deleting CONFIG_EMBEDDED,
this commit gives CONFIG_EMBEDDED a new intended semantics, but keeps it
open for future contributors to implement that intended semantics:
A new CONFIG_EMBEDDED option is added that automatically selects
CONFIG_EXPERT when enabled and can be used in the future to isolate
options that should only be considered for embedded systems (RISC
architectures, SLOB, etc).
Since then, this CONFIG_EMBEDDED implicitly had two purposes:
- It can make even more options visible beyond what CONFIG_EXPERT makes
visible. In other words, it may introduce another level of enabling the
visibility of configuration options: always visible, visible with
CONFIG_EXPERT and visible with CONFIG_EMBEDDED.
- Set certain default values of some configurations differently,
following the assumption that configuring a kernel build for an
embedded system generally starts with a different set of default values
compared to kernel builds for all other kind of systems.
Considering the second purpose, note that already probably arguing that a
kernel build for an embedded system would choose some values differently
is already tricky: the set of embedded systems with Linux kernels is
already quite diverse. Many embedded system have powerful CPUs and it
would not be clear that all embedded systems just optimize towards one
specific aspect, e.g., a smaller kernel image size. So, it is unclear if
starting with "one set of default configuration" that is induced by
CONFIG_EMBEDDED is a good offer for developers configuring their kernels.
Also, the differences of needed user-space features in an embedded system
compared to a non-embedded system are probably difficult or even
impossible to name in some generic way.
So it is not surprising that in the last decade hardly anyone has
contributed changes to make something default differently in case of
CONFIG_EMBEDDED=y.
Currently, in v6.0-rc4, SECRETMEM is the only config switched off if
CONFIG_EMBEDDED=y.
As long as that is actually the only option that currently is selected or
deselected, it is better to just make SECRETMEM configurable at build time
by experts using menuconfig instead.
Make SECRETMEM configurable when EXPERT is set and otherwise default to
yes. Further, SECRETMEM needs ARCH_HAS_SET_DIRECT_MAP.
This allows us to remove CONFIG_EMBEDDED in the close future.
Link: https://lkml.kernel.org/r/20221116131922.25533-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jason Gunthorpe [Wed, 16 Nov 2022 20:07:09 +0000 (16:07 -0400)]
mm/gup: remove the restriction on locked with FOLL_LONGTERM
This restriction was created because FOLL_LONGTERM used to scan the vma
list, so it could not tolerate becoming unlocked. That was fixed in
commit
52650c8b466b ("mm/gup: remove the vma allocation from
gup_longterm_locked()") and the restriction on !vma was removed.
However, the locked restriction remained, even though it isn't necessary
anymore.
Adjust __gup_longterm_locked() so it can handle the mmap_read_lock()
becoming unlocked while it is looping for migration. Migration does not
require the mmap_read_sem because it is only handling struct pages. If we
had to unlock then ensure the whole thing returns unlocked.
Remove __get_user_pages_remote() and __gup_longterm_unlocked(). These
cases can now just directly call other functions.
Link: https://lkml.kernel.org/r/0-v1-b9ae39aa8884+14dbb-gup_longterm_locked_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rong Tao [Sun, 13 Nov 2022 00:38:45 +0000 (08:38 +0800)]
selftests/damon: fix unnecessary compilation warnings
When testing overflow and overread, there is no need to keep unnecessary
compilation warnings, we should simply ignore them.
The motivation for this patch is to eliminate the compilation warning,
maybe one day we will compile the kernel with "-Werror -Wall", at which
point this compilation warning will turn into a compilation error, we
should fix this error in advance.
How to reproduce the problem (with gcc-11.3.1):
$ make -C tools/testing/selftests/
...
warning: `write' reading
4294967295 bytes from a region of size 1
[-Wstringop-overread]
warning: `read' writing
4294967295 bytes into a region of size 25
overflows the destination [-Wstringop-overflow=]
"-Wno-stringop-overread" is supported at least in gcc-11.1.0.
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=d14c547abd484d3540b692bb8048c4a6efe92c8b
Link: https://lkml.kernel.org/r/tencent_51C4ACA8CB3895C2D7F35178440283602107@qq.com
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Li zeming [Mon, 7 Nov 2022 01:56:59 +0000 (09:56 +0800)]
hugetlbfs: inode: remove unnecessary (void*) conversions
The ei pointer does not need to cast the type.
Link: https://lkml.kernel.org/r/20221107015659.3221-1-zeming@nfschina.com
Signed-off-by: Li zeming <zeming@nfschina.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Kara [Tue, 15 Nov 2022 12:32:55 +0000 (13:32 +0100)]
mm: make drop_caches keep reclaiming on all nodes
Currently, drop_caches are reclaiming node-by-node, looping on each node
until reclaim could not make progress. This can however leave quite some
slab entries (such as filesystem inodes) unreclaimed if objects say on
node 1 keep objects on node 0 pinned. So move the "loop until no
progress" loop to the node-by-node iteration to retry reclaim also on
other nodes if reclaim on some nodes made progress. This fixes problem
when drop_caches was not reclaiming lots of otherwise perfectly fine to
reclaim inodes.
Link: https://lkml.kernel.org/r/20221115123255.12559-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: You Zhou <you.zhou@intel.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pasha Tatashin [Tue, 15 Nov 2022 02:06:01 +0000 (02:06 +0000)]
mm: anonymous shared memory naming
Since commit
9a10064f5625 ("mm: add a field to store names for private
anonymous memory"), name for private anonymous memory, but not shared
anonymous, can be set. However, naming shared anonymous memory just as
useful for tracking purposes.
Extend the functionality to be able to set names for shared anon.
There are two ways to create anonymous shared memory, using memfd or
directly via mmap():
1. fd = memfd_create(...)
mem = mmap(..., MAP_SHARED, fd, ...)
2. mem = mmap(..., MAP_SHARED | MAP_ANONYMOUS, -1, ...)
In both cases the anonymous shared memory is created the same way by
mapping an unlinked file on tmpfs.
The memfd way allows to give a name for anonymous shared memory, but
not useful when parts of shared memory require to have distinct names.
Example use case: The VMM maps VM memory as anonymous shared memory (not
private because VMM is sandboxed and drivers are running in their own
processes). However, the VM tells back to the VMM how parts of the memory
are actually used by the guest, how each of the segments should be backed
(i.e. 4K pages, 2M pages), and some other information about the segments.
The naming allows us to monitor the effective memory footprint for each
of these segments from the host without looking inside the guest.
Sample output:
/* Create shared anonymous segmenet */
anon_shmem = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
/* Name the segment: "MY-NAME" */
rv = prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME,
anon_shmem, SIZE, "MY-NAME");
cat /proc/<pid>/maps (and smaps):
7fc8e2b4c000-
7fc8f2b4c000 rw-s
00000000 00:01 1024 [anon_shmem:MY-NAME]
If the segment is not named, the output is:
7fc8e2b4c000-
7fc8f2b4c000 rw-s
00000000 00:01 1024 /dev/zero (deleted)
Link: https://lkml.kernel.org/r/20221115020602.804224-1-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Colin Cross <ccross@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: xu xin <cgel.zte@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
T.J. Mercier [Mon, 14 Nov 2022 23:59:49 +0000 (23:59 +0000)]
mm: shrinkers: add missing includes for undeclared types
The shrinker.h header depends on a user including other headers before it
for types used by shrinker.h. Fix this by including the appropriate
headers in shrinker.h.
./include/linux/shrinker.h:13:9: error: unknown type name `gfp_t'
13 | gfp_t gfp_mask;
| ^~~~~
./include/linux/shrinker.h:71:26: error: field `list' has incomplete type
71 | struct list_head list;
| ^~~~
./include/linux/shrinker.h:82:9: error: unknown type name `atomic_long_t'
82 | atomic_long_t *nr_deferred;
|
Link: https://lkml.kernel.org/r/20221114235949.201749-1-tjmercier@google.com
Fixes:
83aeeada7c69 ("vmscan: use atomic-long for shrinker batching")
Fixes:
b0d40c92adaf ("superblock: introduce per-sb cache shrinker infrastructure")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mike Kravetz [Mon, 14 Nov 2022 23:55:07 +0000 (15:55 -0800)]
hugetlb: remove duplicate mmu notifications
The common hugetlb unmap routine __unmap_hugepage_range performs mmu
notification calls. However, in the case where __unmap_hugepage_range is
called via __unmap_hugepage_range_final, mmu notification calls are
performed earlier in other calling routines.
Remove mmu notification calls from __unmap_hugepage_range. Add
notification calls to the only other caller: unmap_hugepage_range.
unmap_hugepage_range is called for truncation and hole punch, so change
notification type from UNMAP to CLEAR as this is more appropriate.
Link: https://lkml.kernel.org/r/20221114235507.294320-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Cc: Wei Chen <harperchen1110@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Mon, 14 Nov 2022 00:04:47 +0000 (19:04 -0500)]
mm/uffd: sanity check write bit for uffd-wp protected ptes
Let's add one sanity check for CONFIG_DEBUG_VM on the write bit in
whatever chance we have when walking through the pgtables. It can bring
the error earlier even before the app notices the data was corrupted on
the snapshot. Also it helps us to identify this is a wrong pgtable setup,
so hopefully a great information to have for debugging too.
Link: https://lkml.kernel.org/r/20221114000447.1681003-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yixuan Cao [Mon, 14 Nov 2022 17:14:26 +0000 (01:14 +0800)]
mm/kmemleak.c: fix a comment
I noticed a typo in a code comment and I fixed it.
Link: https://lkml.kernel.org/r/20221114171426.91745-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jian Wen [Fri, 11 Nov 2022 03:46:39 +0000 (11:46 +0800)]
docs: admin-guide: cgroup-v1: update description of inactive_file
MADV_FREE pages have been moved into the LRU_INACTIVE_FILE list by commit
f7ad2a6cb9f7 ("mm: move MADV_FREE pages into LRU_INACTIVE_FILE list").
Link: https://lkml.kernel.org/r/20221111034639.3593380-1-wenjian1@xiaomi.com
Signed-off-by: Jian Wen <wenjian1@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaoqian Lin [Thu, 10 Nov 2022 03:07:51 +0000 (07:07 +0400)]
mm/demotion: fix NULL vs IS_ERR checking in memory_tier_init
alloc_memory_type() returns error pointers on error instead of NULL. Use
IS_ERR() to check the return value to fix this.
Link: https://lkml.kernel.org/r/20221110030751.1627266-1-linmq006@gmail.com
Fixes:
7b88bda3761b ("mm/demotion/dax/kmem: set node's abstract distance to MEMTIER_DEFAULT_DAX_ADISTANCE")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 9 Nov 2022 01:23:48 +0000 (09:23 +0800)]
migrate: convert migrate_pages() to use folios
Quite straightforward, the page functions are converted to corresponding
folio functions. Same for comments.
THP specific code are converted to be large folio.
Link: https://lkml.kernel.org/r/20221109012348.93849-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 9 Nov 2022 01:23:47 +0000 (09:23 +0800)]
migrate: convert unmap_and_move() to use folios
Patch series "migrate: convert migrate_pages()/unmap_and_move() to use
folios", v2.
The conversion is quite straightforward, just replace the page API to the
corresponding folio API. migrate_pages() and unmap_and_move() mostly work
with folios (head pages) only.
This patch (of 2):
Quite straightforward, the page functions are converted to corresponding
folio functions. Same for comments.
Link: https://lkml.kernel.org/r/20221109012348.93849-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20221109012348.93849-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Wed, 9 Nov 2022 08:40:27 +0000 (16:40 +0800)]
Revert "mm: migration: fix the FOLL_GET failure on following huge page"
Revert commit
831568214883 ("mm: migration: fix the FOLL_GET failure on
following huge page"), since after commit
1a6baaa0db73 ("s390/hugetlb:
switch to generic version of follow_huge_pud()") and commit
57a196a58421
("hugetlb: simplify hugetlb handling in follow_page_mask") were merged,
now all the following huge page routines can support FOLL_GET operation.
Link: https://lkml.kernel.org/r/496786039852aba90ffa68f10d0df3f4236a990b.1667983080.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pavankumar Kondeti [Wed, 9 Nov 2022 09:26:46 +0000 (14:56 +0530)]
mm/kfence: remove hung_task cruft
commit
fdf756f71271 ("sched: Fix more TASK_state comparisons") makes
hung_task not to monitor TASK_IDLE tasks. The special handling to
workaround hung_task warnings is not required anymore.
Link: https://lkml.kernel.org/r/1667986006-25420-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Tue, 15 Nov 2022 02:03:14 +0000 (11:03 +0900)]
Docs/ABI/zram: document zram recompress sysfs knobs
Document zram re-compression sysfs knobs.
Link: https://lkml.kernel.org/r/20221115020314.386235-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Wed, 9 Nov 2022 11:50:47 +0000 (20:50 +0900)]
zram: add incompressible flag to read_block_state()
Add a new flag to zram block state that shows if the page is
incompressible: that none of the algorithm (including secondary ones)
could compress it.
Link: https://lkml.kernel.org/r/20221109115047.2921851-14-senozhatsky@chromium.org
Suggested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Wed, 9 Nov 2022 11:50:46 +0000 (20:50 +0900)]
zram: add incompressible writeback
Add support for incompressible pages writeback:
echo incompressible > /sys/block/zramX/writeback
Link: https://lkml.kernel.org/r/20221109115047.2921851-13-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Wed, 9 Nov 2022 11:50:45 +0000 (20:50 +0900)]
documentation: add zram recompression documentation
Document user-space visible device attributes that are enabled by
ZRAM_MULTI_COMP.
Link: https://lkml.kernel.org/r/20221109115047.2921851-12-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Wed, 9 Nov 2022 11:50:44 +0000 (20:50 +0900)]
zram: add algo parameter support to zram_recompress()
Recompression iterates through all the registered secondary compression
algorithms in order of their priorities so that we have higher chances of
finding the algorithm that compresses a particular page. This, however,
may not always be best approach and sometimes we may want to limit
recompression to only one particular algorithm. For instance, when a
higher priority algorithm uses too much power and device has a relatively
low battery level we may want to limit recompression to use only a lower
priority algorithm, which uses less power.
Introduce algo= parameter support to recompression sysfs knob so that
user-sapce can request recompression with particular algorithm only:
echo "type=idle algo=zstd" > /sys/block/zramX/recompress
Link: https://lkml.kernel.org/r/20221109115047.2921851-11-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sergey Senozhatsky [Wed, 9 Nov 2022 11:50:43 +0000 (20:50 +0900)]
zram: remove redundant checks from zram_recompress()
Size class index comparison is powerful enough so we can remove object
size comparisons.
Link: https://lkml.kernel.org/r/20221109115047.2921851-10-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexey Romanov [Wed, 9 Nov 2022 11:50:42 +0000 (20:50 +0900)]
zram: add size class equals check into recompression
It makes no sense for us to recompress the object if it will be in the
same size class. We anyway don't get any memory gain. But, at the same
time, we get a CPU time overhead when inserting this object into zspage
and decompressing it afterwards.
[senozhatsky: rebased and fixed conflicts]
Link: https://lkml.kernel.org/r/20221109115047.2921851-9-senozhatsky@chromium.org
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>