Maxim Mikityanskiy [Fri, 21 Jul 2023 14:54:23 +0000 (17:54 +0300)]
platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100
[ Upstream commit
ad084a6d99bc182bf109c190c808e2ea073ec57b ]
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only
(so far only MSI Wind U90/U100). There are, however, a few issues with
the implementation:
1. The initial HW state is always unblocked, regardless of the actual
state on boot, because msi_init_rfkill only sets the SW state,
regardless of ec_read_only.
2. The initial SW state corresponds to the actual state on boot, but it
can't be changed afterwards, because set_device_state returns
-EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth
unusable if it was blocked on boot, and breaking the airplane mode if
the rfkill was unblocked on boot.
Address the above issues by properly initializing the HW state on
ec_read_only laptops and by allowing the userspace to toggle the SW
state. Don't set the SW state ourselves and let the userspace fully
control it. Toggling the SW state is a no-op, however, it allows the
userspace to properly toggle the airplane mode. The actual SW radio
disablement is handled by the corresponding rtl818x_pci and btusb
drivers that have their own rfkills.
Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130.
Fixes:
0816392b97d4 ("msi-laptop: merge quirk tables to one")
Fixes:
0de6575ad0a8 ("msi-laptop: Add MSI Wind U90/U100 support")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Whitchurch [Fri, 21 Jul 2023 13:39:20 +0000 (15:39 +0200)]
net: stmmac: Apply redundant write work around on 4.xx too
[ Upstream commit
284779dbf4e98753458708783af8c35630674a21 ]
commit
a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 ("net: stmmac: work
around sporadic tx issue on link-up") worked around a problem with TX
sometimes not working after a link-up by avoiding a redundant write to
MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems
with handling multiple writes to that register in some cases.
That commit however only added the work around to dwmac_lib.c (apart
from the common code in stmmac_main.c), but my systems with version
4.21a of the IP exhibit the same problem, so add the work around to
dwmac4_lib.c too.
Fixes:
a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Ghosh [Fri, 21 Jul 2023 06:12:22 +0000 (11:42 +0530)]
octeontx2-af: Fix hash extraction enable configuration
[ Upstream commit
4e62c99d71e56817c934caa2a709a775c8cee078 ]
As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.
Fixes:
a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sunil Goutham [Wed, 1 Feb 2023 04:03:01 +0000 (09:33 +0530)]
octeontx2-af: Removed unnecessary debug messages.
[ Upstream commit
609aa68d60965f70485655def733d533f99b341b ]
NPC exact match feature is supported only on one silicon
variant, removed debug messages which print that this
feature is not available on all other silicon variants.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230201040301.1034843-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of:
4e62c99d71e5 ("octeontx2-af: Fix hash extraction enable configuration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Fri, 21 Jul 2023 04:03:56 +0000 (12:03 +0800)]
team: reset team's flags when down link is P2P device
[ Upstream commit
fa532bee17d15acf8bba4bc8e2062b7a093ba801 ]
When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.
After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes:
1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Fri, 21 Jul 2023 04:03:55 +0000 (12:03 +0800)]
bonding: reset bond's flags when down link is P2P device
[ Upstream commit
da19a2b967cf1e2c426f50d28550d1915214a81d ]
When adding a point to point downlink to the bond, we neglected to reset
the bond's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to the bonding.
To address this issue, let's reset the bond's flags for P2P interfaces.
Before fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188::
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/gre6 2006:70:10::1 brd 2006:70:10::2
inet6 fe80::200:ff:fe00:0/64 scope link
valid_lft forever preferred_lft forever
After fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9::
8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2
inet6 fe80::1/64 scope link
valid_lft forever preferred_lft forever
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes:
872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jedrzej Jagielski [Fri, 21 Jul 2023 15:58:54 +0000 (08:58 -0700)]
ice: Fix memory management in ice_ethtool_fdir.c
[ Upstream commit
a3336056504d780590ac6d6ac94fbba829994594 ]
Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.
In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).
In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.
Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes:
cac2a27cd9ab ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stewart Smith [Fri, 21 Jul 2023 22:24:10 +0000 (15:24 -0700)]
tcp: Reduce chance of collisions in inet6_hashfn().
[ Upstream commit
d11b0df7ddf1831f3e170972f43186dad520bfcc ]
For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.
The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.
We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.
While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.
In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).
In commit
dd6d2910c5e0 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing. So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.
In testing, this results in a consistently even spread across the
connection buckets. In both testing and real-world scenarios, we have
not found any measurable performance impact.
Fixes:
08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maciej Żenczykowski [Thu, 20 Jul 2023 16:00:22 +0000 (09:00 -0700)]
ipv6 addrconf: fix bug where deleting a mngtmpaddr can create a new temporary address
[ Upstream commit
69172f0bcb6a09110c5d2a6d792627f5095a9018 ]
currently on 6.4 net/main:
# ip link add dummy1 type dummy
# echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
# ip link set dummy1 up
# ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
valid_lft 604800sec preferred_lft 86172sec
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1
(can wait a few seconds if you want to, the above delete isn't [directly] the problem)
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
valid_lft 604797sec preferred_lft 86169sec
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes:
53bd67491537 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuanjun Gong [Thu, 20 Jul 2023 14:42:19 +0000 (22:42 +0800)]
ethernet: atheros: fix return value check in atl1e_tso_csum()
[ Upstream commit
69a184f7a372aac588babfb0bd681aaed9779f5b ]
in atl1e_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes:
a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuanjun Gong [Sat, 22 Jul 2023 14:25:11 +0000 (22:25 +0800)]
atheros: fix return value check in atl1_tso()
[ Upstream commit
ed96824b71ed67664390890441b229423a25317f ]
in atl1_tso(), it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes:
401c0aabec4b ("atl1: simplify tx packet descriptor")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Mogalapalli [Fri, 21 Jul 2023 09:05:55 +0000 (02:05 -0700)]
phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()
[ Upstream commit
13c088cf3657d70893d75cf116be937f1509cc0f ]
The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM.
In the for loop, 'i' is used as the index for array 'priv->ports[]'
with a check (i > INNO_PHY_PORT_NUM) which indicates that
INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop.
This > comparison needs to be changed to >=, otherwise it potentially leads
to an out of bounds write on the next iteration through the loop
Fixes:
ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230721090558.3588613-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Benc [Fri, 21 Jul 2023 14:30:47 +0000 (16:30 +0200)]
vxlan: fix GRO with VXLAN-GPE
[ Upstream commit
b0b672c4d0957e5897685667fc848132b8bd2d71 ]
In VXLAN-GPE, there may not be an Ethernet header following the VXLAN
header. But in GRO, the vxlan driver calls eth_gro_receive
unconditionally, which means the following header is incorrectly parsed
as Ethernet.
Introduce GPE specific GRO handling.
For better performance, do not check for GPE during GRO but rather
install a different set of functions at setup time.
Fixes:
e1e5314de08ba ("vxlan: implement GPE")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Benc [Fri, 21 Jul 2023 14:30:46 +0000 (16:30 +0200)]
vxlan: generalize vxlan_parse_gpe_hdr and remove unused args
[ Upstream commit
17a0a64448b568442a101de09575f81ffdc45d15 ]
The vxlan_parse_gpe_hdr function extracts the next protocol value from
the GPE header and marks GPE bits as parsed.
In order to be used in the next patch, split the function into protocol
extraction and bit marking. The bit marking is meaningful only in
vxlan_rcv; move it directly there.
Rename the function to vxlan_parse_gpe_proto to reflect what it now
does. Remove unused arguments skb and vxflags. Move the function earlier
in the file to allow it to be called from more places in the next patch.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of:
b0b672c4d095 ("vxlan: fix GRO with VXLAN-GPE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Benc [Thu, 20 Jul 2023 09:05:56 +0000 (11:05 +0200)]
vxlan: calculate correct header length for GPE
[ Upstream commit
94d166c5318c6edd1e079df8552233443e909c33 ]
VXLAN-GPE does not add an extra inner Ethernet header. Take that into
account when calculating header length.
This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is
cached.
In the collect_md mode (which is the only mode that VXLAN-GPE
supports), there's no magic auto-setting of the tunnel interface MTU.
It can't be, since the destination and thus the underlying interface
may be different for each packet.
So, the administrator is responsible for setting the correct tunnel
interface MTU. Apparently, the administrators are capable enough to
calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36).
They set the tunnel interface MTU to 1464. If you run a TCP stream over
such interface, it's then segmented according to the MTU 1464, i.e.
producing 1514 bytes frames. Which is okay, this still fits the lower
MTU.
However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as
the header size and thus incorrectly calculates the frame size to be
1528. This leads to ICMP too big message being generated (locally),
PMTU of 1450 to be cached and the TCP stream to be resegmented.
The fix is to use the correct actual header size, especially for
skb_tunnel_check_pmtu calculation.
Fixes:
e1e5314de08ba ("vxlan: implement GPE")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jijie Shao [Thu, 20 Jul 2023 02:05:10 +0000 (10:05 +0800)]
net: hns3: fix wrong bw weight of disabled tc issue
[ Upstream commit
882481b1c55fc44861d7e2d54b4e0936b1b39f2c ]
In dwrr mode, the default bandwidth weight of disabled tc is set to 0.
If the bandwidth weight is 0, the mode will change to sp.
Therefore, disabled tc default bandwidth weight need changed to 1,
and 0 is returned when query the bandwidth weight of disabled tc.
In addition, driver need stop configure bandwidth weight if tc is disabled.
Fixes:
848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jijie Shao [Thu, 20 Jul 2023 02:05:09 +0000 (10:05 +0800)]
net: hns3: fix wrong tc bandwidth weight data issue
[ Upstream commit
116d9f732eef634abbd871f2c6f613a5b4677742 ]
Currently, the weight saved by the driver is used as the query result,
which may be different from the actual weight in the register.
Therefore, the register value read from the firmware is used
as the query result
Fixes:
0e32038dc856 ("net: hns3: refactor dump tc of debugfs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Lan [Thu, 20 Jul 2023 02:05:07 +0000 (10:05 +0800)]
net: hns3: fix the imp capability bit cannot exceed 32 bits issue
[ Upstream commit
b27d0232e8897f7c896dc8ad80c9907dd57fd3f3 ]
Current only the first 32 bits of the capability flag bit are considered.
When the matching capability flag bit is greater than 31 bits,
it will get an error bit.This patch use bitmap to solve this issue.
It can handle each capability bit whitout bit width limit.
Fixes:
da77aef9cc58 ("net: hns3: create common cmdq resource allocate/free/query APIs")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiawen Wu [Wed, 19 Jul 2023 09:22:33 +0000 (17:22 +0800)]
net: phy: marvell10g: fix 88x3310 power up
[ Upstream commit
c7b75bea853daeb64fc831dbf39a6bbabcc402ac ]
Clear MV_V2_PORT_CTRL_PWRDOWN bit to set power up for 88x3310 PHY,
it sometimes does not take effect immediately. And a read of this
register causes the bit not to clear. This will cause mv3310_reset()
to time out, which will fail the config initialization. So add a delay
before the next access.
Fixes:
c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Keller [Mon, 10 Jul 2023 20:41:28 +0000 (13:41 -0700)]
iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED
[ Upstream commit
91896c8acce23d33ed078cffd46a9534b1f82be5 ]
In iavf_adminq_task(), if the function can't acquire the
adapter->crit_lock, it checks if the driver is removing. If so, it simply
exits without re-enabling the interrupt. This is done to ensure that the
task stops processing as soon as possible once the driver is being removed.
However, if the IAVF_FLAG_PF_COMMS_FAILED is set, the function checks this
before attempting to acquire the lock. In this case, the function exits
early and re-enables the interrupt. This will happen even if the driver is
already removing.
Avoid this, by moving the check to after the adapter->crit_lock is
acquired. This way, if the driver is removing, we will not re-enable the
interrupt.
Fixes:
fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Keller [Mon, 10 Jul 2023 20:41:27 +0000 (13:41 -0700)]
iavf: fix potential deadlock on allocation failure
[ Upstream commit
a2f054c10bef0b54600ec9cb776508443e941343 ]
In iavf_adminq_task(), if kzalloc() fails to allocate the event.msg_buf,
the function will exit without releasing the adapter->crit_lock.
This is unlikely, but if it happens, the next access to that mutex will
deadlock.
Fix this by moving the unlock to the end of the function, and adding a new
label to allow jumping to the unlock portion of the function exit flow.
Fixes:
fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Ming [Thu, 13 Jul 2023 01:42:39 +0000 (09:42 +0800)]
i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()
[ Upstream commit
043b1f185fb0f3939b7427f634787706f45411c4 ]
The debugfs_create_dir() function returns error pointers.
It never returns NULL. Most incorrect error checks were fixed,
but the one in i40e_dbg_init() was forgotten.
Fix the remaining error check.
Fixes:
02e9c290814c ("i40e: debugfs interface")
Signed-off-by: Wang Ming <machel@vivo.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Dufresne [Thu, 25 May 2023 20:10:15 +0000 (22:10 +0200)]
media: amphion: Fix firmware path to match linux-firmware
[ Upstream commit
dcff0b56f661b6b42e828012b464d22cc2068c38 ]
The path did not match the one it was submitted into linux-firmware
which prevented generic distribution from having working CODEC.
Fixes:
9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sakari Ailus [Tue, 13 Jun 2023 16:47:53 +0000 (18:47 +0200)]
media: staging: atomisp: select V4L2_FWNODE
[ Upstream commit
bf4c985707d3168ebb7d87d15830de66949d979c ]
Select V4L2_FWNODE as the driver depends on it.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes:
aa31f6514047 ("media: atomisp: allow building the driver again")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Thu, 25 May 2023 13:38:09 +0000 (14:38 +0100)]
soundwire: qcom: update status correctly with mask
[ Upstream commit
f84d41b2a083b990cbdf70f3b24b6b108b9678ad ]
SoundWire device status can be incorrectly updated without
proper mask, fix this by adding a mask before updating the status.
Fixes:
c7d49c76d1d5 ("soundwire: qcom: add support to new interrupts")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230525133812.30841-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrien Thierry [Thu, 29 Jun 2023 14:45:39 +0000 (10:45 -0400)]
phy: qcom-snps-femto-v2: properly enable ref clock
[ Upstream commit
8a0eb8f9b9a002291a3934acfd913660b905249e ]
The driver is not enabling the ref clock, which thus gets disabled by
the clk_disable_unused() initcall. This leads to the dwc3 controller
failing to initialize if probed after clk_disable_unused() is called,
for instance when the driver is built as a module.
To fix this, switch to the clk_bulk API to handle both cfg_ahb and ref
clocks at the proper places.
Note that the cfg_ahb clock is currently not used by any device tree
instantiation of the PHY. Work needs to be done separately to fix this.
Link: https://lore.kernel.org/linux-arm-msm/ZEqvy+khHeTkC2hf@fedora/
Fixes:
51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs")
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-3-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrien Thierry [Thu, 29 Jun 2023 14:45:38 +0000 (10:45 -0400)]
phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
[ Upstream commit
45d89a344eb46db9dce851c28e14f5e3c635c251 ]
In the dwc3 core, both system and runtime suspend end up calling
dwc3_suspend_common(). From there, what happens for the PHYs depends on
the USB mode and whether the controller is entering system or runtime
suspend.
HOST mode:
(1) system suspend on a non-wakeup-capable controller
The [1] if branch is taken. dwc3_core_exit() is called, which ends up
calling phy_power_off() and phy_exit(). Those two functions decrease the
PM runtime count at some point, so they will trigger the PHY runtime
sleep (assuming the count is right).
(2) runtime suspend / system suspend on a wakeup-capable controller
The [1] branch is not taken. dwc3_suspend_common() calls
phy_pm_runtime_put_sync(). Assuming the ref count is right, the PHY
runtime suspend op is called.
DEVICE mode:
dwc3_core_exit() is called on both runtime and system sleep
unless the controller is already runtime suspended.
OTG mode:
(1) system suspend : dwc3_core_exit() is called
(2) runtime suspend : do nothing
In host mode, the code seems to make a distinction between 1) runtime
sleep / system sleep for wakeup-capable controller, and 2) system sleep
for non-wakeup-capable controller, where phy_power_off() and phy_exit()
are only called for the latter. This suggests the PHY is not supposed to
be in a fully powered-off state for runtime sleep and system sleep for
wakeup-capable controller.
Moreover, downstream, cfg_ahb_clk only gets disabled for system suspend.
The clocks are disabled by phy->set_suspend() [2] which is only called
in the system sleep path through dwc3_core_exit() [3].
With that in mind, don't disable the clocks during the femto PHY runtime
suspend callback. The clocks will only be disabled during system suspend
for non-wakeup-capable controllers, through dwc3_core_exit().
[1] https://elixir.bootlin.com/linux/v6.4/source/drivers/usb/dwc3/core.c#L1988
[2] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/phy/phy-msm-snps-hs.c#L524
[3] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/dwc3/core.c#L1915
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-2-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
8a0eb8f9b9a0 ("phy: qcom-snps-femto-v2: properly enable ref clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Sun, 7 May 2023 14:48:18 +0000 (16:48 +0200)]
phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
[ Upstream commit
2a881183dc5ab2474ef602e48fe7af34db460d95 ]
Update kerneldoc of struct qcom_snps_hsphy to fix:
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c:135: warning: Function parameter or member 'update_seq_cfg' not described in 'qcom_snps_hsphy'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230507144818.193039-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of:
8a0eb8f9b9a0 ("phy: qcom-snps-femto-v2: properly enable ref clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 11 Jul 2023 06:13:25 +0000 (09:13 +0300)]
phy: phy-mtk-dp: Fix an error code in probe()
[ Upstream commit
5782017cc4d0c8f3425d55b893675bb8a20c33e9 ]
Negative -EINVAL was intended instead of positive EINVAL.
Fixes:
6a23afad443a ("phy: phy-mtk-dp: Add driver for DP phy")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/3c699e00-2883-40d9-92c3-0da1dc38fdd4@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Miess [Thu, 22 Jun 2023 12:11:48 +0000 (08:11 -0400)]
drm/amd/display: Prevent vtotal from being set to 0
[ Upstream commit
2a9482e55968ed7368afaa9c2133404069117320 ]
[Why]
In dcn314 DML the destination pipe vtotal was being set
to the crtc adjustment vtotal_min value even in cases
where that value is 0.
[How]
Only set vtotal to the crtc adjustment vtotal_min value
in cases where the value is non-zero.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Miess [Tue, 25 Apr 2023 18:29:48 +0000 (14:29 -0400)]
drm/amd/display: Fix possible underflow for displays with large vblank
[ Upstream commit
1a4bcdbea4319efeb26cc4b05be859a7867e02dc ]
[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate
[How]
Simplify calculation of vblank_nom
Increase value for VBlankNomDefaultUS to 800us
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabe Teeger [Thu, 6 Apr 2023 21:03:06 +0000 (17:03 -0400)]
drm/amd/display: update extended blank for dcn314 onwards
[ Upstream commit
469a62938a45ef382c9cb7b9fec6c6c1fcd781c0 ]
[Why]
Flickering and underflow was observed when testing extended
blank on dcn314.
[What]
Vstartup is contrainted by vblank_nom, so adjusting it to include
non-adjusted vtotal in its calculation during freesync video
means that Vstartup is not changed when vtotal changes.
This fixed the flickering + underflow.
dc_extended_blank_supported function was removed
because extended blank is only relevant to when
zstate is supported. The increased vtotal during
freesync can be passed to dml regardless of whether
extended blank is supported or not, so this function is
not needed.
Updates were made recently in dml to the calculation of
min_dst_y_next_start. Dml input for dcn314 will now
always use the newer calculation for min_dst_y_next_start.
Dml input for older dcn versions remains untouched.
The variable optimized_min_dst_y_next_start
is replaced everywhere with min_dst_y_next_start,
and the updated dml allows min_dst_y_next_start to
increase to an optimized value during freesync video,
then return to default when freesync is disengaged.
Also removed registry key for controlling
extended blank feature.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Fri, 24 Mar 2023 20:29:52 +0000 (14:29 -0600)]
drm/amd/display: Add FAMS validation before trying to use it
[ Upstream commit
e3416e872f84086667df21daf166506fab97358d ]
To ensure that FAMS can be used, DC must check if there is VRR support.
This commit adds the required configuration to ensure FAMS can be executed in the target system.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Thu, 29 Dec 2022 01:00:51 +0000 (17:00 -0800)]
drm/amd/display: fix dc/core/dc.c kernel-doc
[ Upstream commit
db4107e92a817502ad19fdd30250f87dcb6f6331 ]
Fix all kernel-doc warnings in dc/core/dc.c:
dc.c:385: warning: missing initial short description on line:
* dc_stream_adjust_vmin_vmax:
dc.c:392: warning: contents before sections
dc.c:399: warning: No description found for return value of 'dc_stream_adjust_vmin_vmax'
dc.c:434: warning: Excess function parameter 'adjust' description in 'dc_stream_get_last_used_drr_vtotal'
dc.c:434: warning: No description found for return value of 'dc_stream_get_last_used_drr_vtotal'
dc.c:574: warning: No description found for return value of 'dc_stream_configure_crc'
dc.c:1746: warning: No description found for return value of 'dc_commit_state_no_check'
dc.c:4991: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4991: warning: missing initial short description on line:
* dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4723: warning: Function parameter or member 'dc' not described in 'dc_enable_dmub_outbox'
dc.c:4926: warning: Function parameter or member 'dc' not described in 'dc_process_dmub_dpia_hpd_int_enable'
dc.c:4926: warning: Function parameter or member 'hpd_int_enable' not described in 'dc_process_dmub_dpia_hpd_int_enable'
12 warnings
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Tue, 18 Oct 2022 20:27:59 +0000 (16:27 -0400)]
drm/amd/display: Rework comments on dc file
[ Upstream commit
e366f36958f60c431a7430c8c421c9db0ec6738d ]
The file dc.c has multiple comments that do not follow the kernel-doc or
are made in a distracting way. This commit alleviates part of this issue
by reorganizing some comments inside the dc file.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
2a9482e55968 ("drm/amd/display: Prevent vtotal from being set to 0")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liam R. Howlett [Wed, 12 Jul 2023 17:39:15 +0000 (13:39 -0400)]
maple_tree: fix 32 bit mas_next testing
[ Upstream commit
7a93c71a6714ca1a9c03d70432dac104b0cfb815 ]
The test setup of mas_next is dependent on node entry size to create a 2
level tree, but the tests did not account for this in the expected value
when shifting beyond the scope of the tree.
Fix this by setting up the test to succeed depending on the node entries
which is dependent on the 32/64 bit setup.
Link: https://lkml.kernel.org/r/20230712173916.168805-1-Liam.Howlett@oracle.com
Fixes:
120b116208a0 ("maple_tree: reorganize testing to restore module testing")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liam R. Howlett [Thu, 18 May 2023 14:55:28 +0000 (10:55 -0400)]
maple_tree: add __init and __exit to test module
[ Upstream commit
eaf9790d3bc6e157a2134c01c7d707a5a712fab1 ]
The test functions are not needed after the module is removed, so mark
them as such. Add __exit to the module removal function. Some other
variables have been marked as const static as well.
Link: https://lkml.kernel.org/r/20230518145544.1722059-20-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of:
7a93c71a6714 ("maple_tree: fix 32 bit mas_next testing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liam R. Howlett [Fri, 20 Jan 2023 16:26:05 +0000 (11:26 -0500)]
test_maple_tree: test modifications while iterating
[ Upstream commit
5159d64b335401fa83f18c27e2267f1eafc41bd3 ]
Add a testcase to ensure the iterator detects bad states on modifications
and does what the user expects
Link: https://lkml.kernel.org/r/20230120162650.984577-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of:
7a93c71a6714 ("maple_tree: fix 32 bit mas_next testing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu (Google) [Tue, 11 Jul 2023 14:16:07 +0000 (23:16 +0900)]
tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
[ Upstream commit
797311bce5c2ac90b8d65e357603cfd410d36ebb ]
Fix to record 0-length data to data_loc in fetch_store_string*() if it fails
to get the string data.
Currently those expect that the data_loc is updated by store_trace_args() if
it returns the error code. However, that does not work correctly if the
argument is an array of strings. In that case, store_trace_args() only clears
the first entry of the array (which may have no error) and leaves other
entries. So it should be cleared by fetch_store_string*() itself.
Also, 'dyndata' and 'maxlen' in store_trace_args() should be updated
only if it is used (ret > 0 and argument is a dynamic data.)
Link: https://lore.kernel.org/all/168908496683.123124.4761206188794205601.stgit@devnote2/
Fixes:
40b53b771806 ("tracing: probeevent: Add array type support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu (Google) [Tue, 11 Jul 2023 14:15:57 +0000 (23:15 +0900)]
Revert "tracing: Add "(fault)" name injection to kernel probes"
[ Upstream commit
4ed8f337dee32df71435689c19d22e4ee846e15a ]
This reverts commit
2e9906f84fc7c99388bb7123ade167250d50f1c0.
It was turned out that commit
2e9906f84fc7 ("tracing: Add "(fault)"
name injection to kernel probes") did not work correctly and probe
events still show just '(fault)' (instead of '"(fault)"'). Also,
current '(fault)' is more explicit that it faulted.
This also moves FAULT_STRING macro to trace.h so that synthetic
event can keep using it, and uses it in trace_probe.c too.
Link: https://lore.kernel.org/all/168908495772.123124.1250788051922100079.stgit@devnote2/
Link: https://lore.kernel.org/all/20230706230642.3793a593@rorschach.local.home/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of:
797311bce5c2 ("tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steven Rostedt (Google) [Tue, 17 Jan 2023 15:21:28 +0000 (10:21 -0500)]
tracing: Allow synthetic events to pass around stacktraces
[ Upstream commit
00cf3d672a9dd409418647e9f98784c339c3ff63 ]
Allow a stacktrace from one event to be displayed by the end event of a
synthetic event. This is very useful when looking for the longest latency
of a sleep or something blocked on I/O.
# cd /sys/kernel/tracing/
# echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events
# echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 1||prev_state == 2' > events/sched/sched_switch/trigger
# echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger
The above creates a "block_lat" synthetic event that take the stacktrace of
when a task schedules out in either the interruptible or uninterruptible
states, and on a new per process max $delta (the time it was scheduled
out), will print the process id and the stacktrace.
# echo 1 > events/synthetic/block_lat/enable
# cat trace
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
kworker/u16:0-767 [006] d..4. 560.645045: block_lat: pid=767 delta=66 stack=STACK:
=> __schedule
=> schedule
=> pipe_read
=> vfs_read
=> ksys_read
=> do_syscall_64
=> 0x966000aa
<idle>-0 [003] d..4. 561.132117: block_lat: pid=0 delta=413787 stack=STACK:
=> __schedule
=> schedule
=> schedule_hrtimeout_range_clock
=> do_sys_poll
=> __x64_sys_poll
=> do_syscall_64
=> 0x966000aa
<...>-153 [006] d..4. 562.068407: block_lat: pid=153 delta=54 stack=STACK:
=> __schedule
=> schedule
=> io_schedule
=> rq_qos_wait
=> wbt_wait
=> __rq_qos_throttle
=> blk_mq_submit_bio
=> submit_bio_noacct_nocheck
=> ext4_bio_write_page
=> mpage_submit_page
=> mpage_process_page_bufs
=> mpage_prepare_extent_to_map
=> ext4_do_writepages
=> ext4_writepages
=> do_writepages
=> __writeback_single_inode
Link: https://lkml.kernel.org/r/20230117152236.010941267@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Ching-lin Yu <chinglinyu@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of:
797311bce5c2 ("tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu (Google) [Tue, 11 Jul 2023 14:15:29 +0000 (23:15 +0900)]
tracing/probes: Fix to avoid double count of the string length on the array
[ Upstream commit
66bcf65d6cf0ca6540e2341e88ee7ef02dbdda08 ]
If an array is specified with the ustring or symstr, the length of the
strings are accumlated on both of 'ret' and 'total', which means the
length is double counted.
Just set the length to the 'ret' value for avoiding double counting.
Link: https://lore.kernel.org/all/168908492917.123124.15076463491122036025.stgit@devnote2/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/
8819b154-2ba1-43c3-98a2-
cbde20892023@moroto.mountain/
Fixes:
88903c464321 ("tracing/probe: Add ustring type for user-space string")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu (Google) [Mon, 14 Nov 2022 04:47:56 +0000 (13:47 +0900)]
tracing/probes: Add symstr type for dynamic events
[ Upstream commit
b26a124cbfa80f42bfc4e63e1d5643ca98159d66 ]
Add 'symstr' type for storing the kernel symbol as a string data
instead of the symbol address. This allows us to filter the
events by wildcard symbol name.
e.g.
# echo 'e:wqfunc workqueue.workqueue_execute_start symname=$function:symstr' >> dynamic_events
# cat events/eprobes/wqfunc/format
name: wqfunc
ID: 2110
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:__data_loc char[] symname; offset:8; size:4; signed:1;
print fmt: " symname=\"%s\"", __get_str(symname)
Note that there is already 'symbol' type which just change the
print format (so it still stores the symbol address in the tracing
ring buffer.) On the other hand, 'symstr' type stores the actual
"symbol+offset/size" data as a string.
Link: https://lore.kernel.org/all/166679930847.1528100.4124308529180235965.stgit@devnote3/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of:
66bcf65d6cf0 ("tracing/probes: Fix to avoid double count of the string length on the array")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Tue, 4 Jul 2023 20:44:34 +0000 (22:44 +0200)]
mptcp: do not rely on implicit state check in mptcp_listen()
[ Upstream commit
0226436acf2495cde4b93e7400e5a87305c26054 ]
Since the blamed commit, closing the first subflow resets the first
subflow socket state to SS_UNCONNECTED.
The current mptcp listen implementation relies only on such
state to prevent touching not-fully-disconnected sockets.
Incoming mptcp fastclose (or paired endpoint removal) unconditionally
closes the first subflow.
All the above allows an incoming fastclose followed by a listen() call
to successfully race with a blocking recvmsg(), potentially causing the
latter to hit a divide by zero bug in cleanup_rbuf/__tcp_select_window().
Address the issue explicitly checking the msk socket state in
mptcp_listen(). An alternative solution would be moving the first
subflow socket state update into mptcp_disconnect(), but in the long
term the first subflow socket should be removed: better avoid relaying
on it for internal consistency check.
Fixes:
b29fcfb54cd7 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/414
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Menglong Dong [Fri, 6 Jan 2023 18:57:20 +0000 (10:57 -0800)]
mptcp: introduce 'sk' to replace 'sock->sk' in mptcp_listen()
[ Upstream commit
cfdcfeed6449d702825d249cb85346ecf56236fc ]
'sock->sk' is used frequently in mptcp_listen(). Therefore, we can
introduce the 'sk' and replace 'sock->sk' with it.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of:
0226436acf24 ("mptcp: do not rely on implicit state check in mptcp_listen()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oliver Upton [Fri, 9 Jun 2023 22:01:02 +0000 (22:01 +0000)]
arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2
[ Upstream commit
6df696cd9bc1ceed0e92e36908f88bbd16d18255 ]
AmpereOne has an erratum in its implementation of FEAT_HAFDBS that
required disabling the feature on the design. This was done by reporting
the feature as not implemented in the ID register, although the
corresponding control bits were not actually RES0. This does not align
well with the requirements of the architecture, which mandates these
bits be RES0 if HAFDBS isn't implemented.
The kernel's use of stage-1 is unaffected, as the HA and HD bits are
only set if HAFDBS is detected in the ID register. KVM, on the other
hand, relies on the RES0 behavior at stage-2 to use the same value for
VTCR_EL2 on any cpu in the system. Mitigate the non-RES0 behavior by
leaving VTCR_EL2.HA clear on affected systems.
Cc: stable@vger.kernel.org
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Acked-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609220104.1836988-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oliver Upton [Fri, 2 Dec 2022 18:51:56 +0000 (18:51 +0000)]
KVM: arm64: Condition HW AF updates on config option
[ Upstream commit
1dfc3e905089a0bcada268fb5691a605655e0319 ]
As it currently stands, KVM makes use of FEAT_HAFDBS unconditionally.
Use of the feature in the rest of the kernel is guarded by an associated
Kconfig option.
Align KVM with the rest of the kernel and only enable VTCR_HA when
ARM64_HW_AFDBM is enabled. This can be helpful for testing changes to
the stage-2 access fault path on Armv8.1+ implementations.
Link: https://lore.kernel.org/r/20221202185156.696189-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stable-dep-of:
6df696cd9bc1 ("arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian König [Fri, 7 Jul 2023 09:25:00 +0000 (11:25 +0200)]
drm/ttm: never consider pinned BOs for eviction&swap
[ Upstream commit
a2848d08742c8e8494675892c02c0d22acbe3cf8 ]
There is a small window where we have already incremented the pin count
but not yet moved the bo from the lru to the pinned list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com>
Tested-by: Pelloux-Prayer, Pierre-Eric <Pierre-eric.Pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230707120826.3701-1-christian.koenig@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hui Li [Thu, 6 Apr 2023 02:44:50 +0000 (10:44 +0800)]
tty: fix hang on tty device with no_room set
[ Upstream commit
4903fde8047a28299d1fc79c1a0dcc255e928f12 ]
It is possible to hang pty devices in this case, the reader was
blocking at epoll on master side, the writer was sleeping at
wait_woken inside n_tty_write on slave side, and the write buffer
on tty_port was full, we found that the reader and writer would
never be woken again and blocked forever.
The problem was caused by a race between reader and kworker:
n_tty_read(reader): n_tty_receive_buf_common(kworker):
copy_from_read_buf()|
|room = N_TTY_BUF_SIZE - (ldata->read_head - tail)
|room <= 0
n_tty_kick_worker() |
|ldata->no_room = true
After writing to slave device, writer wakes up kworker to flush
data on tty_port to reader, and the kworker finds that reader
has no room to store data so room <= 0 is met. At this moment,
reader consumes all the data on reader buffer and calls
n_tty_kick_worker to check ldata->no_room which is false and
reader quits reading. Then kworker sets ldata->no_room=true
and quits too.
If write buffer is not full, writer will wake kworker to flush data
again after following writes, but if write buffer is full and writer
goes to sleep, kworker will never be woken again and tty device is
blocked.
This problem can be solved with a check for read buffer size inside
n_tty_receive_buf_common, if read buffer is empty and ldata->no_room
is true, a call to n_tty_kick_worker is necessary to keep flushing
data to reader.
Cc: <stable@vger.kernel.org>
Fixes:
42458f41d08f ("n_tty: Ensure reader restarts worker for next reader")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hui Li <caelli@tencent.com>
Message-ID: <
1680749090-14106-1-git-send-email-caelli@tencent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Fri, 11 Nov 2022 14:25:02 +0000 (16:25 +0200)]
n_tty: Rename tail to old_tail in n_tty_read()
[ Upstream commit
947d66b68f3c4e7cf8f3f3500807b9d2a0de28ce ]
The local tail variable in n_tty_read() is used for one purpose, it
keeps the old tail. Thus, rename it appropriately to improve code
readability.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/22b37499-ff9a-7fc1-f6e0-58411328d122@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
4903fde8047a ("tty: fix hang on tty device with no_room set")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Hellström [Mon, 26 Jun 2023 09:14:49 +0000 (11:14 +0200)]
drm/ttm: Don't leak a resource on eviction error
[ Upstream commit
e8188c461ee015ba0b9ab2fc82dbd5ebca5a5532 ]
On eviction errors other than -EMULTIHOP we were leaking a resource.
Fix.
v2:
- Avoid yet another goto (Andi Shyti)
Fixes:
403797925768 ("drm/ttm: Fix multihop assert on eviction.")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> #v1
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626091450.14757-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Hellström [Tue, 7 Mar 2023 14:46:19 +0000 (15:46 +0100)]
drm/ttm: Don't print error message if eviction was interrupted
[ Upstream commit
8ab3b0663e279ab550bc2c0b5d602960e8b94e02 ]
Avoid printing an error message if eviction was interrupted by,
for example, the user pressing CTRL-C. That may happen if eviction
is waiting for something, like for example a free batch-buffer.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307144621.10748-6-thomas.hellstrom@linux.intel.com
Stable-dep-of:
e8188c461ee0 ("drm/ttm: Don't leak a resource on eviction error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Fri, 23 Jun 2023 15:05:21 +0000 (10:05 -0500)]
drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix
[ Upstream commit
cd2e31a9ab93d13c412a36c6e26811e0f830985b ]
The same parade TCON issue can potentially happen on Phoenix, and the same
PSR resilience changes have been ported into the DMUB firmware.
Don't allow running PSR-SU unless on the newer firmware.
Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Fri, 23 Jun 2023 15:05:20 +0000 (10:05 -0500)]
drm/amd/display: Set minimum requirement for using PSR-SU on Rembrandt
[ Upstream commit
c35b6ea8f2ecfa9d775530b70d4e727869099a9c ]
A number of parade TCONs are causing system hangs when utilized with
older DMUB firmware and PSR-SU. Some changes have been introduced into
DMUB firmware to add resilience against these failures.
Don't allow running PSR-SU unless on the newer firmware.
Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
cd2e31a9ab93 ("drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cruise Hung [Fri, 12 May 2023 15:33:46 +0000 (23:33 +0800)]
drm/amd/display: Update correct DCN314 register header
[ Upstream commit
268182606f26434c5d3ebd0e86efcb0418dec487 ]
[Why]
The register header for DCN314 is not correct.
[How]
Update correct DCN314 register header.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
cd2e31a9ab93 ("drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmytro Laktyushkin [Tue, 16 May 2023 19:50:40 +0000 (15:50 -0400)]
drm/amd/display: fix dcn315 single stream crb allocation
[ Upstream commit
49f26218c344741cb3eaa740b1e44e960551a87f ]
Change to improve avoiding asymetric crb calculations for single stream
scenarios.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmytro Laktyushkin [Fri, 9 Dec 2022 20:13:18 +0000 (15:13 -0500)]
drm/amd/display: add pixel rate based CRB allocation support
[ Upstream commit
9ba90d760e9354c124fa9bbea08017d96699a82c ]
This feature is meant to unblock PSTATE for certain high end display
configs on dcn315. This is achieved by allocating CRB to detile buffer
based on display requirements to meet pstate latency hiding needs.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmytro Laktyushkin [Tue, 1 Nov 2022 21:09:11 +0000 (17:09 -0400)]
drm/amd/display: fix unbounded requesting for high pixel rate modes on dcn315
[ Upstream commit
655435df0936ce2fda0d5ced7e50101179a3acfd ]
Unbounded requesting is getting configured for odm mode calculations which
is incorrect. This change checks whether mode requires odm ahead of time.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmytro Laktyushkin [Fri, 7 Oct 2022 15:01:08 +0000 (11:01 -0400)]
drm/amd/display: use low clocks for no plane configs
[ Upstream commit
2641c7b7808191cba25ba28b82bb73ca294924cc ]
Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK
or FCLK. They also always allow pstate change.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
49f26218c344 ("drm/amd/display: fix dcn315 single stream crb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Samson Tam [Tue, 9 May 2023 20:40:19 +0000 (16:40 -0400)]
drm/amd/display: add ODM case when looking for first split pipe
[ Upstream commit
59de751e3845d699e02dc4da47322b92d83a41e2 ]
[Why]
When going from ODM 2:1 single display case to max displays, second
odm pipe needs to be repurposed for one of the new single displays.
However, acquire_first_split_pipe() only handles MPC case and not
ODM case
[How]
Add ODM conditions in acquire_first_split_pipe()
Add commit_minimal_transition_state() in commit_streams() to handle
odm 2:1 exit first, and then process new streams
Handle ODM condition in commit_minimal_transition_state()
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alvin Lee [Wed, 2 Nov 2022 16:38:12 +0000 (12:38 -0400)]
drm/amd/display: Use min transition for all SubVP plane add/remove
[ Upstream commit
e4c1b01bc35b04e15782608165aa85b9e1724f7b ]
[Description]
- Whenever disabling a phantom pipe, we must run through the
minimal transition sequence
- In the case where SetVisibility = false for the main pipe,
we also need to run through the min transtion when disabling
the phantom pipes
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Tue, 18 Oct 2022 12:28:19 +0000 (08:28 -0400)]
drm/amd/display: Include surface of unaffected streams
[ Upstream commit
f6ae69f49fcf697b6ffa93d58eb3746897f61cf8 ]
The commit stream function does not include surfaces of unaffected
streams, which may lead to some blank screens during mode change in some
edge cases. This commit adds surfaces of unaffected streams followed by
kernel-doc for documenting some of the fields that participate in this
change.
v2: squash in kerneldoc warning fix (Alex)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Tue, 18 Oct 2022 12:28:18 +0000 (08:28 -0400)]
drm/amd/display: Copy DC context in the commit streams
[ Upstream commit
0e986cea0347902b2c72b09c8fe9c0f30d7decb4 ]
DC adds an instance of DML (which contains VBA) to each context, and
multiple threads might write back to the global VBA resulting in data
overwriting. To keep the consistency with other parts of the DC code,
this commit changes dc_commit_streams to copy the current DC state, and
as a result, it also changes the function signature to expect streams
instead of a context.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Tue, 18 Oct 2022 12:28:17 +0000 (08:28 -0400)]
drm/amd/display: Enable new commit sequence only for DCN32x
[ Upstream commit
7b36f4d18e3e4941d12fe027ad6ad6123c257027 ]
Change commit sequence will impact all ASICs. It is prudent to run this
update in small steps to keep issues under control and avoid any
potential regression. With this idea in mind, this commit is preparation
work for the complete transition to the new commit sequence. To maintain
this change manageable across multiple ASICs, this commit adds a new
function named dc_commit_streams which is a copy of the dc_commit_state
with some minor changes. Finally, inside the dc_commit_state, we check
if we are using DCN32x or above and enable the new sequence only for
those devices.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Tue, 18 Oct 2022 12:28:16 +0000 (08:28 -0400)]
drm/amd/display: Rework context change check
[ Upstream commit
10fdb0a11c555e0d6f7698d2874581d06e99ee71 ]
Context change is all about streams; for this reason, this commit
renames context_changed to streams_changed. Additionally, to make this
function more flexible, this commit changes the function signature to
receive the stream array and the stream count as a parameter.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Tue, 18 Oct 2022 12:28:15 +0000 (08:28 -0400)]
drm/amd/display: Check if link state is valid
[ Upstream commit
03ce7b387e8b0f4a1dc97a878545bdf7c7f23251 ]
The link state is set to false if there is no link and local sink. Even
though the stream state may not change, it is desirable to commit the
new stream when HPD goes low to high.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hamza Mahfooz [Tue, 15 Nov 2022 16:58:45 +0000 (11:58 -0500)]
drm/amd/display: add FB_DAMAGE_CLIPS support
[ Upstream commit
30ebe41582d1ea5a7de990319f9e593dad4886f7 ]
Currently, userspace doesn't have a way to communicate selective updates
to displays. So, enable support for FB_DAMAGE_CLIPS for DCN ASICs newer
than DCN301, convert DRM damage clips to dc dirty rectangles and fill
them into dirty_rects in fill_dc_dirty_rects().
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
72f1de49ffb9 ("drm/dp_mst: Clear MSG_RDY flag before sending new message")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rick Wertenbroek [Tue, 18 Apr 2023 07:46:57 +0000 (09:46 +0200)]
PCI: rockchip: Don't advertise MSI-X in PCIe capabilities
[ Upstream commit
a52587e0bee14cbeeadf48a24013828cb04b8df8 ]
The RK3399 PCIe endpoint controller cannot generate MSI-X IRQs.
This is documented in the RK3399 technical reference manual (TRM)
section 17.5.9 "Interrupt Support".
MSI-X capability should therefore not be advertised. Remove the
MSI-X capability by editing the capability linked-list. The
previous entry is the MSI capability, therefore get the next
entry from the MSI-X capability entry and set it as next entry
for the MSI capability. This in effect removes MSI-X from the list.
Linked list before : MSI cap -> MSI-X cap -> PCIe Device cap -> ...
Linked list now : MSI cap -> PCIe Device cap -> ...
Link: https://lore.kernel.org/r/20230418074700.1083505-11-rick.wertenbroek@gmail.com
Fixes:
cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rick Wertenbroek [Tue, 18 Apr 2023 07:46:55 +0000 (09:46 +0200)]
PCI: rockchip: Fix window mapping and address translation for endpoint
[ Upstream commit
dc73ed0f1b8bddd7f2bf70d123e68ffc99ad71ce ]
The RK3399 PCI endpoint core has 33 windows for PCIe space, now in the
driver up to 32 fixed size (1M) windows are used and pages are allocated
and mapped accordingly. The driver first used a single window and allocated
space inside which caused translation issues (between CPU space and PCI
space) because a window can only have a single translation at a given
time, which if multiple pages are allocated inside will cause conflicts.
Now each window is a single region of 1M which will always guarantee that
the translation is not in conflict.
Set the translation register addresses for physical function. As documented
in the technical reference manual (TRM) section 17.5.5 "PCIe Address
Translation" and section 17.6.8 "Address Translation Registers Description"
Link: https://lore.kernel.org/r/20230418074700.1083505-9-rick.wertenbroek@gmail.com
Fixes:
cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rick Wertenbroek [Tue, 18 Apr 2023 07:46:48 +0000 (09:46 +0200)]
PCI: rockchip: Remove writes to unused registers
[ Upstream commit
92a9c57c325dd51682d428ba960d961fec3c8a08 ]
Remove write accesses to registers that are marked "unused" (and
therefore read-only) in the technical reference manual (TRM)
(see RK3399 TRM 17.6.8.1)
Link: https://lore.kernel.org/r/20230418074700.1083505-2-rick.wertenbroek@gmail.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Stable-dep-of:
dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Tue, 2 May 2023 08:39:23 +0000 (11:39 +0300)]
PCI/ASPM: Avoid link retraining race
[ Upstream commit
e7e39756363ad5bd83ddeae1063193d0f13870fd ]
PCIe r6.0.1, sec 7.5.3.7, recommends setting the link control parameters,
then waiting for the Link Training bit to be clear before setting the
Retrain Link bit.
This avoids a race where the LTSSM may not use the updated parameters if it
is already in the midst of link training because of other normal link
activity.
Wait for the Link Training bit to be clear before toggling the Retrain Link
bit to ensure that the LTSSM uses the updated link control parameters.
[bhelgaas: commit log, return 0 (success)/-ETIMEDOUT instead of bool for
both pcie_wait_for_retrain() and the existing pcie_retrain_link()]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes:
7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilpo Järvinen [Tue, 20 Jun 2023 19:49:33 +0000 (14:49 -0500)]
PCI/ASPM: Factor out pcie_wait_for_retrain()
[ Upstream commit
9c7f136433d26592cb4d9cd00b4e15c33d9797c6 ]
Factor pcie_wait_for_retrain() out from pcie_retrain_link(). No functional
change intended.
[bhelgaas: split out from
https: //lore.kernel.org/r/
20230502083923.34562-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of:
e7e39756363a ("PCI/ASPM: Avoid link retraining race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Helgaas [Tue, 20 Jun 2023 19:44:55 +0000 (14:44 -0500)]
PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()
[ Upstream commit
f5297a01ee805d7fa569d288ed65fc0f9ac9b03d ]
"pcie_retrain_link" is not a question with a true/false answer, so "bool"
isn't quite the right return type. Return 0 for success or -ETIMEDOUT if
the retrain failed. No functional change intended.
[bhelgaas: based on Ilpo's patch below]
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of:
e7e39756363a ("PCI/ASPM: Avoid link retraining race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huacai Chen [Wed, 28 Jun 2023 11:08:47 +0000 (19:08 +0800)]
MIPS: Loongson: Fix build error when make modules_install
[ Upstream commit
531b3d1195d096f14e030c4b01ec3a53b80276bf ]
After commit
0e96ea5c3eb5904e5dc2f ("MIPS: Loongson64: Clean up use of
cc-ifversion") we get a build error when make modules_install:
cc1: error: '-mloongson-mmi' must be used with '-mhard-float'
The reason is when make modules_install, 'call cc-option' doesn't work
in $(KBUILD_CFLAGS) of 'CHECKFLAGS'. Then there is no -mno-loongson-mmi
applied and -march=loongson3a enable MMI instructions.
To be detail, the error message comes from the CHECKFLAGS invocation of
$(CC) but it has no impact on the final result of make modules_install,
it is purely a cosmetic issue. The error occurs because cc-option is
defined in scripts/Makefile.compiler, which is not included in Makefile
when running 'make modules_install', as install targets are not supposed
to require the compiler; see commit
805b2e1d427aab4b ("kbuild: include
Makefile.compiler only when compiler is needed"). As a result, the call
to check for '-mno-loongson-mmi' just never happens.
Fix this by partially reverting to the old logic, use 'call cc-option'
to conditionally apply -march=loongson3a and -march=mips64r2.
By the way, Loongson-2E/2F is also broken in commit
13ceb48bc19c563e05f4
("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") so fix it
together.
Fixes:
13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls")
Fixes:
0e96ea5c3eb5904e5dc2 ("MIPS: Loongson64: Clean up use of cc-ifversion")
Cc: stable@vger.kernel.org
Cc: Feiyang Chen <chenfeiyang@loongson.cn>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiaxun Yang [Tue, 4 Apr 2023 09:33:47 +0000 (10:33 +0100)]
MIPS: Loongson: Move arch cflags to MIPS top level Makefile
[ Upstream commit
194a835210521282ad31e8f7047556318611f596 ]
Arch cflags should be independent to Platform.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of:
531b3d1195d0 ("MIPS: Loongson: Fix build error when make modules_install")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Tue, 4 Jul 2023 19:50:28 +0000 (21:50 +0200)]
i2c: nomadik: Remove a useless call in the remove function
[ Upstream commit
05f933d5f7318b03ff2028c1704dc867ac16f2c7 ]
Since commit
235602146ec9 ("i2c-nomadik: turn the platform driver to an amba
driver"), there is no more request_mem_region() call in this driver.
So remove the release_mem_region() call from the remove function which is
likely a left over.
Fixes:
235602146ec9 ("i2c-nomadik: turn the platform driver to an amba driver")
Cc: <stable@vger.kernel.org> # v3.6+
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andi Shyti [Sun, 11 Jun 2023 01:37:00 +0000 (03:37 +0200)]
i2c: nomadik: Use devm_clk_get_enabled()
[ Upstream commit
9c7174db4cdd111e10d19eed5c36fd978a14c8a2 ]
Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of:
05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andi Shyti [Sun, 11 Jun 2023 01:36:59 +0000 (03:36 +0200)]
i2c: nomadik: Remove unnecessary goto label
[ Upstream commit
1c5d33fff0d375e4ab7c4261dc62a286babbb4c6 ]
The err_no_mem goto label doesn't do anything. Remove it.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of:
05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Markus Elfring [Fri, 2 Feb 2018 13:50:09 +0000 (14:50 +0100)]
i2c: Improve size determinations
[ Upstream commit
06e989578232da33a7fe96b04191b862af8b2cec ]
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding
size determination a bit safer according to the Linux coding style
convention.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of:
05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Markus Elfring [Fri, 2 Feb 2018 16:24:57 +0000 (17:24 +0100)]
i2c: Delete error messages for failed memory allocations
[ Upstream commit
6b3b21a8542fd2fb6ffc61bc13b9419f0c58ebad ]
These issues were detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of:
05f933d5f731 ("i2c: nomadik: Remove a useless call in the remove function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Filipe Manana [Mon, 19 Jun 2023 16:21:50 +0000 (17:21 +0100)]
btrfs: fix race between quota disable and relocation
[ Upstream commit
8a4a0b2a3eaf75ca8854f856ef29690c12b2f531 ]
If we disable quotas while we have a relocation of a metadata block group
that has extents belonging to the quota root, we can cause the relocation
to fail with -ENOENT. This is because relocation builds backref nodes for
extents of the quota root and later needs to walk the backrefs and access
the quota root - however if in between a task disables quotas, it results
in deleting the quota root from the root tree (with btrfs_del_root(),
called from btrfs_quota_disable().
This can be sporadically triggered by test case btrfs/255 from fstests:
$ ./check btrfs/255
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.4.0-rc6-btrfs-next-134+ #1 SMP PREEMPT_DYNAMIC Thu Jun 15 11:59:28 WEST 2023
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
btrfs/255 6s ... _check_dmesg: something found in dmesg (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.dmesg)
- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad)
# --- tests/btrfs/255.out 2023-03-02 21:47:53.
876609426 +0000
# +++ /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad 2023-06-16 10:20:39.
267563212 +0100
# @@ -1,2 +1,4 @@
# QA output created by 255
# +ERROR: error during balancing '/home/fdmanana/btrfs-tests/scratch_1': No such file or directory
# +There may be more info in syslog - try dmesg | tail
# Silence is golden
# ...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/255.out /home/fdmanana/git/hub/xfstests/results//btrfs/255.out.bad' to see the entire diff)
Ran: btrfs/255
Failures: btrfs/255
Failed 1 of 1 tests
To fix this make the quota disable operation take the cleaner mutex, as
relocation of a block group also takes this mutex. This is also what we
do when deleting a subvolume/snapshot, we take the cleaner mutex in the
cleaner kthread (at cleaner_kthread()) and then we call btrfs_del_root()
at btrfs_drop_snapshot() while under the protection of the cleaner mutex.
Fixes:
bed92eae26cc ("Btrfs: qgroup implementation and prototypes")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Golaszewski [Wed, 19 Jul 2023 11:41:01 +0000 (13:41 +0200)]
gpio: mvebu: fix irq domain leak
[ Upstream commit
644ee70267a934be27370f9aa618b29af7290544 ]
Uwe Kleine-König pointed out we still have one resource leak in the mvebu
driver triggered on driver detach. Let's address it with a custom devm
action.
Fixes:
812d47889a8e ("gpio/mvebu: Use irq_domain_add_linear")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Mon, 17 Jul 2023 14:27:43 +0000 (16:27 +0200)]
gpio: mvebu: Make use of devm_pwmchip_add
[ Upstream commit
1945063eb59e64d2919cb14d54d081476d9e53bb ]
This allows to get rid of a call to pwmchip_remove() in the error path. There
is no .remove function for this driver, so this change fixes a resource leak
when a gpio-mvebu device is unbound.
Fixes:
757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Thu, 17 Nov 2022 11:08:00 +0000 (13:08 +0200)]
pwm: Add a stub for devm_pwmchip_add()
commit
88da4e8113110d5f4ebdd2f8cd0899e300cd1954 upstream.
The devm_pwmchip_add() can be called by a module that optionally
instantiates PWM chip. In the case of CONFIG_PWM=n, the compilation
can't be performed. Hence, add a necessary stub.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 10 Jul 2023 12:34:25 +0000 (14:34 +0200)]
gpio: tps68470: Make tps68470_gpio_output() always set the initial value
[ Upstream commit
5a7adc6c1069ce31ef4f606ae9c05592c80a6ab5 ]
Make tps68470_gpio_output() call tps68470_gpio_set() for output-only pins
too, so that the initial value passed to gpiod_direction_output() is
honored for these pins too.
Fixes:
275b13a65547 ("gpio: Add support for TPS68470 GPIOs")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ondrej Mosnacek [Tue, 18 Jul 2023 11:56:07 +0000 (13:56 +0200)]
io_uring: don't audit the capability check in io_uring_create()
[ Upstream commit
6adc2272aaaf84f34b652cf77f770c6fcc4b8336 ]
The check being unconditional may lead to unwanted denials reported by
LSMs when a process has the capability granted by DAC, but denied by an
LSM. In the case of SELinux such denials are a problem, since they can't
be effectively filtered out via the policy and when not silenced, they
produce noise that may hide a true problem or an attack.
Since not having the capability merely means that the created io_uring
context will be accounted against the current user's RLIMIT_MEMLOCK
limit, we can disable auditing of denials for this check by using
ns_capable_noaudit() instead of capable().
Fixes:
2b188cc1bb85 ("Add io_uring IO interface")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2193317
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230718115607.65652-1-omosnace@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudio Imbrenda [Wed, 5 Jul 2023 11:19:37 +0000 (13:19 +0200)]
KVM: s390: pv: fix index value of replaced ASCE
[ Upstream commit
c2fceb59bbda16468bda82b002383bff59de89ab ]
The index field of the struct page corresponding to a guest ASCE should
be 0. When replacing the ASCE in s390_replace_asce(), the index of the
new ASCE should also be set to 0.
Having the wrong index might lead to the wrong addresses being passed
around when notifying pte invalidations, and eventually to validity
intercepts (VM crash) if the prefix gets unmapped and the notifier gets
called with the wrong address.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes:
faa2f72cb356 ("KVM: s390: pv: leak the topmost page table when destroy fails")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <
20230705111937.33472-3-imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haren Myneni [Sun, 16 Jul 2023 10:05:06 +0000 (03:05 -0700)]
powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close
[ Upstream commit
b59c9dc4d9d47b3c4572d826603fde507055b656 ]
Commit
8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().
t1: mmap() call to mmap t2: Migration event
window paste address
do_mmap2() migration_store()
ksys_mmap_pgoff() pseries_migrate_partition()
vm_mmap_pgoff() vas_migration_handler()
Acquire mmap lock reconfig_close_windows()
do_mmap() lock mmap_mutex
mmap_region() Acquire mmap lock
call_mmap() //Wait for mmap lock
coproc_mmap() unmap vma
lock mmap_mutex update window status
//wait for mmap_mutex Release mmap lock
mmap vma unlock mmap_mutex
update window status
unlock mmap_mutex
...
Release mmap lock
Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().
Fixes:
8ef7b9e1765a ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ross Lagerwall [Fri, 14 Jul 2023 10:11:06 +0000 (11:11 +0100)]
blk-mq: Fix stall due to recursive flush plug
[ Upstream commit
70904263512a74a3b8941dd9e6e515ca6fc57821 ]
We have seen rare IO stalls as follows:
* blk_mq_plug_issue_direct() is entered with an mq_list containing two
requests.
* For the first request, it sets last == false and enters the driver's
queue_rq callback.
* The driver queue_rq callback indirectly calls schedule() which calls
blk_flush_plug(). This may happen if the driver has the
BLK_MQ_F_BLOCKING flag set and is allowed to sleep in ->queue_rq.
* blk_flush_plug() handles the remaining request in the mq_list. mq_list
is now empty.
* The original call to queue_rq resumes (with last == false).
* The loop in blk_mq_plug_issue_direct() terminates because there are no
remaining requests in mq_list.
The IO is now stalled because the last request submitted to the driver
had last == false and there was no subsequent call to commit_rqs().
Fix this by returning early in blk_mq_flush_plug_list() if rq_count is 0
which it will be in the recursive case, rather than checking if the
mq_list is empty. At the same time, adjust one of the callers to skip
the mq_list empty check as it is not necessary.
Fixes:
dc5fc361d891 ("block: attempt direct issue of plug list")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230714101106.3635611-1-ross.lagerwall@citrix.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhihao Cheng [Tue, 6 Jun 2023 13:59:26 +0000 (21:59 +0800)]
jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
[ Upstream commit
e34c8dd238d0c9368b746480f313055f5bab5040 ]
Following process,
jbd2_journal_commit_transaction
// there are several dirty buffer heads in transaction->t_checkpoint_list
P1 wb_workfn
jbd2_log_do_checkpoint
if (buffer_locked(bh)) // false
__block_write_full_page
trylock_buffer(bh)
test_clear_buffer_dirty(bh)
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
if (buffer_write_io_error(bh)) // false
>> bh IO error occurs <<
jbd2_cleanup_journal_tail
__jbd2_update_log_tail
jbd2_write_superblock
// The bh won't be replayed in next mount.
, which could corrupt the ext4 image, fetch a reproducer in [Link].
Since writeback process clears buffer dirty after locking buffer head,
we can fix it by try locking buffer and check dirtiness while buffer is
locked, the buffer head can be removed if it is neither dirty nor locked.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Fixes:
470decc613ab ("[PATCH] jbd2: initial copy of files from jbd")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Sat, 8 Jul 2023 02:26:09 +0000 (21:26 -0500)]
drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
commit
e701156ccc6c7a5f104a968dda74cd6434178712 upstream.
SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit
38e4ced80479 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Sat, 8 Jul 2023 02:26:08 +0000 (21:26 -0500)]
drm/amd: Move helper for dynamic speed switch check out of smu13
commit
188623076d0f1a500583d392b6187056bf7cc71a upstream.
This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Tue, 16 May 2023 14:16:18 +0000 (22:16 +0800)]
ovl: fix null pointer dereference in ovl_permission()
commit
1a73f5b8f079fd42a544c1600beface50c63af7c upstream.
Following process:
P1 P2
path_lookupat
link_path_walk
inode_permission
ovl_permission
ovl_i_path_real(inode, &realpath)
path->dentry = ovl_i_dentry_upper(inode)
drop_cache
__dentry_kill(ovl_dentry)
iput(ovl_inode)
ovl_destroy_inode(ovl_inode)
dput(oi->__upperdentry)
dentry_kill(upperdentry)
dentry_unlink_inode
upperdentry->d_inode = NULL
realinode = d_inode(realpath.dentry) // return NULL
inode_permission(realinode)
inode->i_sb // NULL pointer dereference
, will trigger an null pointer dereference at realinode:
[ 335.664979] BUG: kernel NULL pointer dereference,
address:
0000000000000002
[ 335.668032] CPU: 0 PID: 2592 Comm: ls Not tainted 6.3.0
[ 335.669956] RIP: 0010:inode_permission+0x33/0x2c0
[ 335.678939] Call Trace:
[ 335.679165] <TASK>
[ 335.679371] ovl_permission+0xde/0x320
[ 335.679723] inode_permission+0x15e/0x2c0
[ 335.680090] link_path_walk+0x115/0x550
[ 335.680771] path_lookupat.isra.0+0xb2/0x200
[ 335.681170] filename_lookup+0xda/0x240
[ 335.681922] vfs_statx+0xa6/0x1f0
[ 335.682233] vfs_fstatat+0x7b/0xb0
Fetch a reproducer in [Link].
Use the helper ovl_i_path_realinode() to get realinode and then do
non-nullptr checking.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217405
Fixes:
4b7791b2e958 ("ovl: handle idmappings in ovl_permission()")
Cc: <stable@vger.kernel.org> # v5.19
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Agustin Gutierrez [Tue, 21 Feb 2023 21:08:15 +0000 (16:08 -0500)]
drm/amd/display: Keep PHY active for dp config
commit
2b02d746c1818baf741f4eeeff9b97ab4b81e1cf upstream.
[Why]
Current hotplug sequence causes temporary hang at the re-entry of the
optimized power state.
[How]
Keep a PHY active when detecting DP signal + DPMS active
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shyam Sundar S K [Fri, 14 Jul 2023 14:44:34 +0000 (20:14 +0530)]
platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params
commit
839e90e75e695b3d9ee17f5a2811e7ee5aea8d4a upstream.
apmf_get_system_params() failure is not a critical event, reduce its
verbosity from dev_err to dev_dbg.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shyam Sundar S K [Fri, 14 Jul 2023 14:44:35 +0000 (20:14 +0530)]
platform/x86/amd/pmf: Notify OS power slider update
commit
33c9ab5b493a0e922b06c12fed4fdcb862212cda upstream.
APMF fn8 can notify EC about the OS slider position change. Add this
capability to the PMF driver so that it can call the APMF fn8 based on
the changes in the Platform profile events.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230714144435.1239776-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Sun, 25 Jun 2023 22:42:19 +0000 (00:42 +0200)]
netfilter: nf_tables: fix underflow in chain reference counter
commit
b389139f12f287b8ed2e2628b72df89a081f0b59 upstream.
Set element addition error path decrements reference counter on chains
twice: once on element release and again via nft_data_release().
Then,
d6b478666ffa ("netfilter: nf_tables: fix underflow in object
reference counter") incorrectly fixed this by removing the stateful
object reference count decrement.
Restore the stateful object decrement as in
b91d90368837 ("netfilter:
nf_tables: fix leaking object reference count") and let
nft_data_release() decrement the chain reference counter, so this is
done only once.
Fixes:
d6b478666ffa ("netfilter: nf_tables: fix underflow in object reference counter")
Fixes:
628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Fri, 16 Jun 2023 13:20:08 +0000 (15:20 +0200)]
netfilter: nf_tables: fix underflow in object reference counter
commit
d6b478666ffa6d2c25386d78bf1c4640d4da305e upstream.
Since ("netfilter: nf_tables: drop map element references from
preparation phase"), integration with commit protocol is better,
therefore drop the workaround that
b91d90368837 ("netfilter: nf_tables:
fix leaking object reference count") provides.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 27 Jul 2023 06:50:53 +0000 (08:50 +0200)]
Linux 6.1.42
Link: https://lore.kernel.org/r/20230725104507.756981058@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hersen Wu [Mon, 26 Jun 2023 17:40:58 +0000 (13:40 -0400)]
Revert "drm/amd/display: edp do not add non-edid timings"
commit
d6149086b45e150c170beaa4546495fd1880724c upstream.
This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.
This reverts commit
e749dd10e5f292061ad63d2b030194bf7d7d452c.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-starfive.git / log