Matti Aaltonen [Mon, 18 Oct 2010 09:54:14 +0000 (06:54 -0300)]
[media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Matti Aaltonen [Mon, 18 Oct 2010 13:52:37 +0000 (10:52 -0300)]
[media] Documentation: v4l: Add hw_seek spacing and two TUNER_RDS_CAP flags
Add a couple of words about the spacing field in the HW seek struct,
also a few words about the new RDS tuner capability flags
V4L2_TUNER_CAP_RDS_BLOCK-IO and V4L2_TUNER_CAP_RDS_CONTROLS.
Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 17 Oct 2010 12:26:18 +0000 (09:26 -0300)]
[media] [RFC] radio-mr800: locking fixes
- serialize the suspend and resume functions using the global lock.
- do not call usb_autopm_put_interface after a disconnect.
- fix a race when disconnecting the device.
Reported-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: David Ellingsworth<david@identd.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Joe Perches [Sun, 20 Jun 2010 07:20:46 +0000 (04:20 -0300)]
[media] drivers/media/IR/imon.c: Use pr_err instead of err
Use the standard error logging mechanisms.
Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s" fmt, __func__
Remove __func__ from err calls, add '\n', rename to pr_err
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Thu, 5 Aug 2010 20:29:55 +0000 (17:29 -0300)]
[media] drivers/media/video/bt8xx: Adjust confusing if indentation
Indent the branch of an if.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@
(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
if (p1[0].column == p2[0].column):
cocci.print_main("branch",p1)
cocci.print_secs("after",p2)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Malcolm Priestley [Sat, 16 Oct 2010 19:44:43 +0000 (16:44 -0300)]
[media] lmedm04: driver for DM04/QQBOX updated to version 1.60
These include
-later kill of usb_buffer to avoid kernel crash on hot unplugging.
-DiSEqC functions.
-LNB Power switch
-Faster channel change.
-support for LG tuner on LME2510C.
-firmware switching for LG tuner.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Fri, 22 Oct 2010 07:10:57 +0000 (04:10 -0300)]
[media] s5p-fimc: dubious one-bit signed bitfields
> From: Dan Carpenter [mailto:error27@gmail.com]
>
> These are signed so instead of being 1 and 0 as intended they are -1 and
> 0. It doesn't cause a bug in the current code but Sparse warns about
> it:
>
> drivers/media/video/s5p-fimc/fimc-core.h:226:28:
> error: dubious one-bit signed bitfield
> struct fimc_scaler {
> - int scaleup_h:1;
> - int scaleup_v:1;
> - int copy_mode:1;
> - int enabled:1;
> + unsigned int scaleup_h:1;
> + unsigned int caleup_v:1;
> + unsigned int copy_mode:1;
> + unsigned int enabled:1;
In general I agree, however this patch would change scaleup_v:1
to caleup_v, so it cannot be applied in current form.
Here is the corrected patch:
Reported-by: Dan Carpenter <error27@gmail.com<
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Thu, 21 Oct 2010 19:22:43 +0000 (16:22 -0300)]
[media] s5p-fimc: add unlock on error path
There was an unlock missing if kzalloc() failed.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 13:04:06 +0000 (10:04 -0300)]
[media] cx18: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, replace the hardcoded module name passed to those
functions by NULL.
The sub-devices without a listed module name don't result in and I2C
sub-device being created, as they either are IR devices or don't have an
I2C address listed. It's thus safe to rely on modaliases only.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the cx18 driver
uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 12:58:51 +0000 (09:58 -0300)]
[media] ivtv: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, replace the hardcoded module name passed to those
functions by NULL.
The sub-devices without a listed module name don't result in and I2C
sub-device being created, as they either are IR devices or don't have an
I2C address listed. It's thus safe to rely on modaliases only.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the ivtv driver
uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 12:32:10 +0000 (09:32 -0300)]
[media] vpif_capture: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, don't use the module names hardcoded in platform
data by passing a NULL module name to those functions.
The only platform using the VPIF capture device (DM646x EVM) hardcodes
the module names to invalid values (tvp514x-0 and tvp514x-1). As this is
already broken, there's no risk of breaking it more.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 12:31:00 +0000 (09:31 -0300)]
[media] vpif_display: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, don't use the module names hardcoded in platform
data by passing a NULL module name to those functions.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the vpif_display
platform data uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 12:05:13 +0000 (09:05 -0300)]
[media] vpfe_capture: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, don't use the module names hardcoded in platform
data by passing a NULL module name to those functions.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the vpfe_capture
platform data uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 12:27:03 +0000 (09:27 -0300)]
[media] soc_camera: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, remove the module names hardcoded in platform data
and pass a NULL module name to those functions.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the soc_camera
platform data uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 11:45:07 +0000 (08:45 -0300)]
[media] radio-si4713: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, replace the hardcoded module name passed to those
functions by NULL.
As no board seems to use this driver, no platform data has been checked.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 11:39:19 +0000 (08:39 -0300)]
[media] sh_vou: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, remove the module names hardcoded in platform data
and pass a NULL module name to those functions.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the sh_vou
platform data uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 11:35:21 +0000 (08:35 -0300)]
[media] pvrusb2: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, replace the hardcoded module name passed to those
functions by NULL.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the pvrusb2
driver uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-By: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 11:19:18 +0000 (08:19 -0300)]
[media] zoran: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, replace the hardcoded module name passed to those
functions by NULL.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the zoran driver
uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 11:11:59 +0000 (08:11 -0300)]
[media] go7007: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, replace the hardcoded module name passed to those
functions by NULL.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the go7007
driver uses.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 11:10:06 +0000 (08:10 -0300)]
[media] go7007: Fix the TW2804 I2C type name
The TW2804 I2C sub-device type name was incorrectly set to wis_twTW2804
for the adlink mpg24 board. Rename it to wis_tw2804.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 11:09:08 +0000 (08:09 -0300)]
[media] go7007: Add MODULE_DEVICE_TABLE to the go7007 I2C modules
The device table is required to load modules based on modaliases.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 10:58:29 +0000 (07:58 -0300)]
[media] v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev*
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, replace the hardcoded module name passed to those
functions by NULL.
All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the drivers
modified here use.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 24 Sep 2010 10:37:47 +0000 (07:37 -0300)]
[media] v4l: Load I2C modules based on modalias
When creating a new sub-device, The V4L I2C subdev API has historically
required drivers to pass the name of the module that implements support
for the I2C device.
I2C modules can be loaded based on modaliases instead of the module
name. As the I2C device type name is already available to the
v4l2_i2c_new_subdev* functions, make the module name argument optional
and create a modalias based on the type name when no module name is
provided.
All in-tree drivers call those functions with a non-NULL module name
argument, this change is thus harmless.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Thu, 21 Oct 2010 19:22:14 +0000 (16:22 -0300)]
[media] cx231xx: fix double lock typo
This was supposed to be an unlock on the error path.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Cc: Palash Bandyopadhyay < palash.bandyopadhyay@conexant.com>
Cc: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 17 Oct 2010 21:25:10 +0000 (18:25 -0300)]
[media] anysee: switch to RC core
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 17 Oct 2010 19:16:13 +0000 (16:16 -0300)]
[media] Anysee remote controller
Anysee remote controller keytable. Uses NEC address 0x08.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dan Carpenter [Thu, 21 Oct 2010 19:21:45 +0000 (16:21 -0300)]
[media] cx88: uninitialized variable
Fixes a gcc warning:
drivers/media/video/cx88/cx88-video.c:772:
warning: ‘core’ may be used uninitialized in this function
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adrian Taylor [Wed, 20 Oct 2010 10:55:33 +0000 (07:55 -0300)]
[media] Support for Elgato Video Capture
This patch allows this device successfully to show video, at least from
its composite input.
I have no information about the true hardware contents of this device and so
this patch is based solely on fiddling with things until it worked. The
chip appears to be em2860, and the closest device with equivalent inputs
is the Typhoon DVD Maker. Copying the settings for that device appears
to do the trick. That's what this patch does.
[mchehab@redhat.com: update CARDLIST.em28xx accordingly, via script]
Signed-off-by: Adrian Taylor <adrian.taylor@realvnc.com>
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Oct 2010 22:50:50 +0000 (20:50 -0200)]
[media] Documentation/video4linux/CARDLIST.[cx88|saa7134]
Fix a few troubles at the card entries
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Fri, 22 Oct 2010 19:49:35 +0000 (16:49 -0300)]
[media] mceusb: hook debug print spew directly into parser routine
Provides more complete debug spew, parses individual commands and raw IR
data one chunk at a time.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Fri, 22 Oct 2010 17:42:54 +0000 (14:42 -0300)]
[media] mceusb: add symbolic names for commands
And replace usage of hex values w/symbolic names wherever possible
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Oct 2010 14:52:53 +0000 (11:52 -0300)]
[media] mceusb: Allow a per-model device name
It is better to use a per-model device name, especially on
multi-function devices like Polaris. So, allow overriding the
default name at the mceusb model table.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Oct 2010 14:51:50 +0000 (11:51 -0300)]
[media] mceusb: allow a per-model RC map
Especially when used with Polaris boards, devices may have different
types of remotes shipped. So, we need a per-model rc-map.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Oct 2010 14:50:37 +0000 (11:50 -0300)]
[media] mceusb: add a per-model structure
The previous logic needed duplicate USB table structs, one to store
the list of the devices, and 3 sets of other structs, to store the
quirks list.
With this change, devices that require expecial quirks just need to
have a .driver_info = <quirk entry>.
It also allows adding some extra quirks, like per-model RC tables.
As a bonus, this patch reduced in 10% the data segment size:
text data bss dec hex filename
15487 5008 4 20499 5013 old/mceusb.ko
15438 4496 4 19938 4de2 new/mceusb.ko
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Mauro Carvalho Chehab [Fri, 22 Oct 2010 04:35:44 +0000 (01:35 -0300)]
[media] mceusb: improve ir data buffer parser
Switch to a state machine that properly handles all incoming urb data
packets, and reads much cleaner and corrects some minor parsing errors
that were hindering decode on cx231xx/Polaris integrated IR. Also tested
with four different mceusb variants, and works perfectly with all of
them (at least for the rc6a mce remotes).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Jarod Wilson [Wed, 20 Oct 2010 18:01:59 +0000 (15:01 -0300)]
[media] lirc_it87: add another pnp id
Jochen Kühner reports lirc_it87 works with his hardware with this device
ID.
Tested-by: Jochen Kühner <jochen.kuehner@gmx.de>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Tue, 19 Oct 2010 17:26:01 +0000 (14:26 -0300)]
[media] lirc_igorplugusb: add Fit PC2 device ID
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Tue, 19 Oct 2010 17:25:29 +0000 (14:25 -0300)]
[media] lirc_igorplugusb: handle hw buffer overruns better
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Mon, 18 Oct 2010 14:57:06 +0000 (11:57 -0300)]
[media] lirc_igorplugusb: assorted fixups
Tighten up error checking, rename some functions to less generic names,
remove unnecessary cruft, add missing debug modparam wiring, and fix up
some printk output.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Tue, 19 Oct 2010 15:54:05 +0000 (12:54 -0300)]
[media] lirc_parallel: build on smp and kill dead code
Talked to Christoph Bartelmus about this a bit, and he says this driver
actually *should* work okay on CONFIG_SMP, the check was a legacy one
from the very early days of SMP support before it had stabilized (yes,
this driver is that ancient).
Also remove some completely unused code, only noticed after building
this driver for the first time in an eternity (on an SMP host now, of
course).
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Mon, 18 Oct 2010 21:39:20 +0000 (18:39 -0300)]
[media] lirc_dev: rework storage for cdev data
Fixes an oops when an lirc driver that doesn't provide its own fops is
unplugged while the lirc cdev is open. Tested with lirc_igorplugusb,
with a special thanks to Timo Boettcher for providing the test hardware.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Mon, 18 Oct 2010 20:30:20 +0000 (17:30 -0300)]
[media] lirc_dev: call cdev_del *after* irctl cleanup
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Mon, 18 Oct 2010 15:02:01 +0000 (12:02 -0300)]
[media] lirc_dev: more error-checking improvements
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Sun, 17 Oct 2010 00:36:43 +0000 (21:36 -0300)]
[media] lirc_dev: get irctl from irctls by inode again
Can't explain it (yet), but I've seen the 'get irctl via private_data'
setup fail for a number of people (ioctl called before its filled in?),
so lets go back to a variant of the old way, but one that still works
with unlocked_ioctl.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Sun, 17 Oct 2010 00:32:44 +0000 (21:32 -0300)]
[media] lirc_dev: fix pointer to owner
If an lirc device driver doesn't specify its own fops, we set set
ir->cdev.owner to THIS_MODULE. If it does specify its own fops, we
set ir->cdev.owner to ir->d.owner. Subsequent module_{get,put} calls
should be using ir->cdev.owner, not ir->d.owner.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Sun, 17 Oct 2010 00:29:50 +0000 (21:29 -0300)]
[media] lirc_dev: sanitize function and struct names a bit
Use names that clearly identify functions as lirc functions.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jarod Wilson [Wed, 20 Oct 2010 19:26:09 +0000 (16:26 -0300)]
[media] dvb: remove obsolete lgdt3304 driver
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Tue, 19 Oct 2010 07:29:10 +0000 (04:29 -0300)]
[media] gspca: Fix coding style issues
The errors were found by checkpatch.pl. Most fixes are:
- remove spaces followed by TAB(s),
- split lines greater than 80 characters,
- move most '{'s from start of line to end of previous line.
(Some '{'s at start of line remain when the '}'s are on the same line)
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Németh Márton [Tue, 19 Oct 2010 06:33:47 +0000 (03:33 -0300)]
[media] gspca - sonixj: Add horizontal and vertical flip for po2030n
The PO2030N sensor chip found in hama AC-150 webcam supports horizontal
and vertical flipping the image by hardware.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Németh Márton [Mon, 18 Oct 2010 10:00:48 +0000 (07:00 -0300)]
[media] gspca - sonixj: Remove magic numbers for delay
The number 0xdd is used for marking delay init sequence steps.
Replace 0xdd values only if the meaning is delay.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Thu, 21 Oct 2010 07:09:34 +0000 (04:09 -0300)]
[media] gspca - sonixj: Fix a regression with sensor hv7131r
The bug was introduced by commit
d5aa3856fd09ad0ea04619d6cba31192dac08e84
removing the probe sequence of hv7131r with bridge sn9c120 and so, letting
the sensor inactive.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Thu, 21 Oct 2010 07:05:15 +0000 (04:05 -0300)]
[media] gspca - sonixj: Fix a regression of sensors hv7131r and mi0360
The bug was introduced by commit
23a98274cc348880ecb6803307c254448084953a
applying values of sensor sp80708 to sensors hv7131r and mi0360.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ruslan Pisarev [Wed, 20 Oct 2010 09:35:34 +0000 (06:35 -0300)]
[media] tm6000: fix macros and comments coding style issue in tm6000.h
This is a patch to the tm6000.h file that fixed up a macros and
comment error found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ruslan Pisarev [Wed, 20 Oct 2010 09:36:18 +0000 (06:36 -0300)]
[media] Staging: tm6000: Delete braces from return in tm6000-cards.c
This is a patch to the tm6000-cards.c file that fixed up
a space error found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ruslan Pisarev [Wed, 20 Oct 2010 09:35:54 +0000 (06:35 -0300)]
[media] tm6000: fix comments coding style issue in group of files
This is a patch to the
tm6000-cards.c
tm6000-core.c
tm6000-dvb.c
tm6000-i2c.c
tm6000-input.c
tm6000-regs.h
tm6000-stds.c
tm6000-usb-isoc.h
tm6000.h
files that fixed up a comments warnings found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ruslan Pisarev [Wed, 20 Oct 2010 09:35:12 +0000 (06:35 -0300)]
[media] Staging: tm6000: fix braces, tabs, comments and space coding style issue in tm6000-video.c
This is a patch to the tm6000-video.c file that fixed
up a braces, tabs, comments and space Errors and Warnings found by the checkpatch.pl tools.
[mchehab@redhat.com: some changes didn't apply as it were based to an older version, so used patch -f to apply only the changes that are OK]
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ruslan Pisarev [Wed, 20 Oct 2010 09:34:40 +0000 (06:34 -0300)]
[media] tm6000: don't initialize static var on tm6000-i2c.c
This is a patch to the tm6000-i2c.c file that fixed "ERROR: do not
initialise statics to 0 or NULL" found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Corbet [Wed, 20 Oct 2010 00:32:11 +0000 (21:32 -0300)]
[media] Add the via framebuffer camera controller driver
Add a driver for the video capture port on VIA integrated chipsets. This
version has a remaining OLPCism or two and expects to be talking to an
ov7670; those can be improved as the need arises.
This work was supported by the One Laptop Per Child project.
Thanks to Laurent Pinchart for a number of useful comments.
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Daniel Drake [Mon, 18 Oct 2010 21:07:36 +0000 (18:07 -0300)]
[media] ov7670: fix QVGA visible area
The QVGA mode has a green horizontal line on the left hand side, and a red
(or sometimes blue) vertical line at the bottom. Tweak the visible area
to remove them.
Thanks to Mauro for explaining how to fix this.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Derek Kelly [Sat, 16 Oct 2010 19:33:53 +0000 (16:33 -0300)]
[media] av7110: Fix driver name
This patch changes the name of the av7110 driver from the
generic "dvb" to "av7110", to be descriptive of the driver.
I've included Oliver Endriss's ack from the original post, which
contained a mangled patch. The content of the patch is unchanged.
Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michel Garnier [Sat, 16 Oct 2010 17:42:01 +0000 (14:42 -0300)]
[media] em28xx: Add dvb support for Terratec Cinergy Hybrid T USB XS FR
Signed-off-by: Michel Garnier <catimimi@orange.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 20 Oct 2010 14:56:50 +0000 (11:56 -0300)]
[media] ir-raw-event: Fix a stupid error at a printk
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Oct 2010 00:18:49 +0000 (21:18 -0300)]
[media] cx231xx: Fix compilation breakage if DVB is not selected
In file included from drivers/media/video/cx231xx/cx231xx-audio.c:40:
drivers/media/video/cx231xx/cx231xx.h:559: error: field ‘frontends’ has incomplete type
make[4]: ** [drivers/media/video/cx231xx/cx231xx-audio.o] Erro 1
make[3]: ** [drivers/media/video/cx231xx] Erro 2
make[2]: ** [drivers/media/video] Erro 2
make[1]: ** [drivers/media] Erro 2
make: ** [drivers] Erro 2
Reported-by: Marcio Araujo Alves <froooozen@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 18 Oct 2010 22:28:07 +0000 (19:28 -0300)]
[media] cx231xx: Remove IR support from the driver
Polaris design uses MCE support. Instead of reinventing the wheel,
just let mceusb handle the remote controller.
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 19 Oct 2010 00:10:46 +0000 (21:10 -0300)]
[media] cx231xx: Only register USB interface 1
Interface 0 is used by IR. The current driver starts initializing
on it, finishing on interface 6. Change the logic to only handle
interface 1. This allows another driver (mceusb) to take care of
the IR interface.
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 18 Oct 2010 19:32:50 +0000 (16:32 -0300)]
[media] mceusb: add support for cx231xx-based IR (e. g. Polaris)
For now, it adds support for Conexant EVK and for Pixelview.
We should probably find a better way to specify all Conexant
Polaris devices, to avoid needing to repeat this setup on
both mceusb and cx231xx-cards.
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 11 Oct 2010 13:48:11 +0000 (10:48 -0300)]
[media] tm6000: fix resource locking
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 11 Oct 2010 12:57:34 +0000 (09:57 -0300)]
[media] tm6000: Use just one lock for devlist
This avoids a race condition
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 10 Oct 2010 00:15:33 +0000 (21:15 -0300)]
[media] tm6000-alsa: fix some locking issues
Those locking issues affect tvtime, causing a kernel oops/panic, due to
a race condition.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 9 Oct 2010 20:05:14 +0000 (17:05 -0300)]
[media] tm6000: don't use BKL at the driver
Instead, use core lock handling.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 21 Oct 2010 13:13:37 +0000 (11:13 -0200)]
[media] cx25840: Remove a now unused variable
drivers/media/video/cx25840/cx25840-core.c: In function ‘cx25840_s_frequency’:
drivers/media/video/cx25840/cx25840-core.c:1563: warning: unused variable ‘state’
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 18 Oct 2010 09:51:35 +0000 (06:51 -0300)]
[media] SR030PC30: Avoid use of uninitialized variables
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Maxim Levitsky [Sat, 16 Oct 2010 22:56:30 +0000 (19:56 -0300)]
[media] IR: ene_ir: don't upload all settings on each TX packet
This is just unnessesary, and now more logical
Also a lot of refactoring
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Maxim Levitsky [Sat, 16 Oct 2010 22:56:29 +0000 (19:56 -0300)]
[media] IR: ene_ir: add support for carrier reports
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Maxim Levitsky [Sat, 16 Oct 2010 22:56:28 +0000 (19:56 -0300)]
[media] IR: extend ir_raw_event and do refactoring
Add new event types for timeout & carrier report
Move timeout handling from ir_raw_event_store_with_filter to
ir-lirc-codec, where it is really needed.
Now lirc bridge ensures proper gap handling.
Extend lirc bridge for carrier & timeout reports
Note: all new ir_raw_event variables now should be initialized
like that: DEFINE_IR_RAW_EVENT(ev);
To clean an existing event, use init_ir_raw_event(&ev);
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Derek Kelly [Sat, 16 Oct 2010 19:07:47 +0000 (16:07 -0300)]
[media] dvb-usb-gp8psk: Fix tuner timeout (against git)
This patches adjusts the tuner delay to be longer in response to
several users experiencing tuner timeouts. This change fixes that
problem and allows those users to be able to tune.
Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Derek Kelly [Sat, 16 Oct 2010 19:18:15 +0000 (16:18 -0300)]
[media] dvb-usb-gp8psk: Fix driver name
This patch updates the name of the dvb-usb-gp8psk driver
from "Genpix 8psk-to-USB2 DVB-S" to "Genpix DVB-S".
The old name doesn't reflect newer devices such as the
Skywalker line which also user this driver.
Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sven Barth [Sat, 10 Jul 2010 18:02:21 +0000 (15:02 -0300)]
[media] Add support for AUX_PLL on cx2583x chips
This adds support for the AUX_PLL in cx2583x chips which is available in
those although the audio part of the chip is not.
The AUX_PLL is used at least by Terratec in their Grabster AV400 device.
Signed-off-by: Sven Barth <pascaldragon@googlemail.com>
Acked-by: Mike Isely <isely@pobox.com>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stephen Rothwell [Tue, 19 Oct 2010 07:07:30 +0000 (18:07 +1100)]
[media] v4l-dvb: using vmalloc needs vmalloc.h in cx231xx-417.c
Fixes these build errors and warnings:
drivers/media/video/cx231xx/cx231xx-417.c: In function 'cx231xx_load_firmware':
drivers/media/video/cx231xx/cx231xx-417.c:943: error: implicit declaration of function 'vmalloc'
drivers/media/video/cx231xx/cx231xx-417.c:943: warning: cast to pointer from integer of different size
drivers/media/video/cx231xx/cx231xx-417.c:950: warning: cast to pointer from integer of different size
drivers/media/video/cx231xx/cx231xx-417.c:1039: error: implicit declaration of function 'vfree'
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Hans Verkuil [Sun, 17 Oct 2010 10:24:20 +0000 (07:24 -0300)]
[media] msp3400: fix mute audio regression
The switch to the new control framework caused a regression where the audio was
no longer unmuted after the carrier scan finished.
The original code attempted to set the volume control to its current value in
order to have the set-volume control code to be called that handles the volume
and muting. However, the framework will not call that code unless the new volume
value is different from the old.
Instead we now call msp_s_ctrl directly.
It is a bit of a hack: we really need a v4l2_ctrl_refresh_ctrl function for this
(or something along those lines).
Thanks to Andy Walls for bisecting this and to Shane Shrybman for reporting it!
Reported-by: Shane Shrybman <shrybman@teksavvy.com>
Thanks-to: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Sat, 16 Oct 2010 16:54:05 +0000 (13:54 -0300)]
[media] gspca - main: Fix a regression with the PS3 Eye webcam
When audio is present, some alternate settings were skipped.
This prevented some webcams to work, especially when bulk transfer was used.
This patch permits to use the last or only alternate setting.
Reported-by: Antonio Ospite <ospite@studenti.unina.it>
Tested-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 17 Oct 2010 20:14:15 +0000 (17:14 -0300)]
[media] Re: [git:v4l-dvb/v2.6.37] [media] Fix compilation of Siliconfile SR030PC30 VGA camera
Siliconfile SR030PC30 VGA camera fails to compile with this error:
drivers/media/video/sr030pc30.c: In function ‘sr030pc30_probe’:
drivers/media/video/sr030pc30.c:834: error: implicit declaration of function ‘kzalloc’
drivers/media/video/sr030pc30.c:834: warning: assignment makes pointer from integer without a cast
drivers/media/video/sr030pc30.c: In function ‘sr030pc30_remove’:
drivers/media/video/sr030pc30.c:858: error: implicit declaration of function ‘kfree’
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Janne Grunau [Mon, 11 Oct 2010 13:29:36 +0000 (10:29 -0300)]
[media] hdpvr: add usb product id 0x4903
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alan Young [Mon, 26 Jul 2010 11:50:32 +0000 (08:50 -0300)]
[media] hdpvr: decrease URB timeout to 90ms
Based on USB traces of the windows driver.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Janne Grunau [Tue, 27 Jul 2010 14:01:47 +0000 (11:01 -0300)]
[media] hdpvr: fix audio input setting for pre AC3 firmwares
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Janne Grunau [Tue, 27 Jul 2010 13:40:43 +0000 (10:40 -0300)]
[media] hdpvr: use AC3 as default audio codec for SPDIF
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Janne Grunau [Tue, 27 Jul 2010 14:03:35 +0000 (11:03 -0300)]
[media] hdpvr: add two known to work firmware versions
refine the firmware version test and print the version only once
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alan Young [Mon, 26 Jul 2010 11:30:06 +0000 (08:30 -0300)]
[media] hdpvr: print firmware date
Hauppauge released different firmwares using the same version number.
The firmware date can be used to identify the exact driver/firmware
combination.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alan Young [Mon, 26 Jul 2010 19:27:32 +0000 (16:27 -0300)]
[media] hdpvr: remove unecessary sleep in buffer drain loop
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alan Young [Mon, 26 Jul 2010 11:17:53 +0000 (08:17 -0300)]
[media] hdpvr: remove unnecessary sleep in hdpvr_config_call
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
James M McLaren [Sun, 3 Oct 2010 22:09:18 +0000 (19:09 -0300)]
[media] hdpvr: Add missing URB_NO_TRANSFER_DMA_MAP flag
Necessary on arm.
Signed-off-by: Janne Grunau <j@jannau.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Matti Aaltonen [Thu, 7 Oct 2010 13:16:11 +0000 (10:16 -0300)]
[media] V4L2: Add seek spacing and RDS CAP bits
Add spacing field to v4l2_hw_freq_seek.
Add V4L2_TUNER_CAP_RDS_BLOCK_IO, which indicates that the tuner/
transmitter if capable of transmitting/receiving RDS blocks.
Add V4L2_TUNER_CAP_RDS_CONTROLS capability, which indicates that the
RDS data is handled as values of predefined controls like radio text,
program ID and so on.
Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Malcolm Priestley [Sun, 26 Sep 2010 18:16:20 +0000 (15:16 -0300)]
[media] DiSEqC bug fixed for stv0288 based interfaces
Fixed problem with DiSEqC communication. The message was wrongly modulated,
so the DiSEqC switch was not work.
This patch fixes DiSEqC messages, simple tone burst and tone on/off.
I verified it with osciloscope against the DiSEqC documentation.
Interface: PCI DVB-S TV tuner TeVii S420
Kernel: 2.6.32-24-generic (UBUNTU 10.4)
Signed-off-by: Josef Pavlik <josef@pavlik.it>
Tested-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Shevchenko [Sat, 11 Sep 2010 17:33:27 +0000 (14:33 -0300)]
[media] dvb: mantis: use '%pM' format to print MAC address
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Mon, 6 Sep 2010 06:53:48 +0000 (03:53 -0300)]
[media] v4l: videobuf: remove unused is_userptr variable
Remove unused is_userptr variable from videobuf-dma-contig.
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sergey Ivanov [Mon, 9 Aug 2010 13:18:32 +0000 (10:18 -0300)]
[media] Twinhan 1027 + IR Port support
Patch add support of TwinHan 1027 DVB-S card.
Refreshed version of https://patchwork.kernel.org/patch/79753/ patch.
(adapted for the new IR system), still works.
DVB-S support come from a patch originally authored by
Manu Abraham (abraham.manu@gmail.com).
IR Port support were added by Sergey.
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Sat, 16 Oct 2010 17:12:53 +0000 (14:12 -0300)]
[media] gspca - mars: Add illuminator controls
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Sat, 16 Oct 2010 17:10:59 +0000 (14:10 -0300)]
[media] gspca - mars: Propagate USB errors to higher level
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Sat, 16 Oct 2010 17:07:06 +0000 (14:07 -0300)]
[media] gspca - mars: Use the new video control mechanism
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-François Moine [Sat, 16 Oct 2010 16:59:13 +0000 (13:59 -0300)]
[media] gspca - main: Have discontinuous sequence numbers when frames are lost
This patch also sets to 0 the sequence of the first frame.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / platform / kernel / linux-amlogic.git / log