vhost_net: fix OoB on sendmsg() failure.

commit 3c4cea8fa7f71f00c5279547043a84bc2a4d8b8c upstream.

If the sendmsg() call in vhost_tx_batch() fails, both the 'batched_xdp'
and 'done_idx' indexes are left unchanged. If such failure happens
when batched_xdp == VHOST_NET_BATCH, the next call to
vhost_net_build_xdp() will access and write memory outside the xdp
buffers area.

Since sendmsg() can only error with EBADFD, this change addresses the
issue explicitly freeing the XDP buffers batch on error.

Fixes: 0a0be13b8fe2 ("vhost_net: batch submitting XDP buffers to underlayer sockets")
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gen_compile_commands: fix missing 'sys' package

commit ec783c7cb2495c5a3b8ca10db8056d43c528f940 upstream.

We need to import the 'sys' package since the script has called
sys.exit() method.

Fixes: 6ad7cbc01527 ("Makefile: Add clang-tidy and static analyzer support to makefile")
Signed-off-by: Kortan <kortanzh@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipa: initialize all filter table slots

commit b5c102238cea985d8126b173d06b9e1de88037ee upstream.

There is an off-by-one problem in ipa_table_init_add(), when
initializing filter tables.

In that function, the number of filter table entries is determined
based on the number of set bits in the filter map.  However that
count does *not* include the extra "slot" in the filter table that
holds the filter map itself.  Meanwhile, ipa_table_addr() *does*
include the filter map in the memory it returns, but because the
count it's provided doesn't include it, it includes one too few
table entries.

Fix this by including the extra slot for the filter map in the count
computed in ipa_table_init_add().

Note: ipa_filter_reset_table() does not have this problem; it resets
filter table entries one by one, but does not overwrite the filter
bitmap.

Fixes: 2b9feef2b6c2 ("soc: qcom: ipa: filter and routing tables")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

events: Reuse value read using READ_ONCE instead of re-reading it

commit b89a05b21f46150ac10a962aa50109250b56b03b upstream.

In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.

Fixes: 375637bc52495 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: fix io_work priority inversion

commit 70f437fb4395ad4d1d16fab9a1ad9fbc9fc0579b upstream.

Dispatching requests inline with the .queue_rq() call may block while
holding the send_mutex. If the tcp io_work also happens to schedule, it
may see the req_list is non-empty, leaving "pending" true and remaining
in TASK_RUNNING. Since io_work is of higher scheduling priority, the
.queue_rq task may not get a chance to run, blocking forward progress
and leading to io timeouts.

Instead of checking for pending requests within io_work, let the queueing
restart io_work outside the send_mutex lock if there is more work to be
done.

Fixes: a0fdd1418007f ("nvme-tcp: rerun io_work if req_list is not empty")
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix potential sleeping in atomic context

commit ee27e330a953595903979ffdb84926843595a9fe upstream.

Fixes the below flow of sleeping in atomic context by releasing
the RCU lock before calling to free_match_list.

build_match_list() <- disables preempt
-> free_match_list()
   -> tree_put_node()
      -> down_write_ref_node() <- take write lock

Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: FWTrace, cancel work on alloc pd error flow

commit dfe6fd72b5f1878b16aa2c8603e031bbcd66b96d upstream.

Handle error flow on mlx5_core_alloc_pd() failure,
read_fw_strings_work must be canceled.

Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Reported-by: Pavel Machek (CIP) <pavel@denx.de>
Suggested-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf machine: Initialize srcline string member in add_location struct

commit 57f0ff059e3daa4e70a811cb1d31a49968262d20 upstream.

It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:

  # perf top --sort comm -g --ignore-callees=do_idle

terminates with:

  #0  0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
  #1  0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
  #2  0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
  #3  hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
  #4  0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
      sample_self=sample_self@entry=true) at util/hist.c:657
  #5  0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
      sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
  #6  0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
      at util/hist.c:1056
  #7  iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
  #8  0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
      at util/hist.c:1231
  #9  0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
      at builtin-top.c:842
  #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
  #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
  #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
  #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
  #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
  #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
  #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
  #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
  #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6

If you look at the frame #2, the code is:

488  if (he->srcline) {
489          he->srcline = strdup(he->srcline);
490          if (he->srcline == NULL)
491              goto err_rawdata;
492  }

If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.

Also, if you look at the commit 1fb7d06a509e, it adds the srcline property
into the struct, but not initializing it everywhere needed.

Committer notes:

Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():

2181         if (al.sym != NULL) {
2182                 if (perf_hpp_list.parent && !*parent &&
2183                     symbol__match_regex(al.sym, &parent_regex))
2184                         *parent = al.sym;
2185                 else if (have_ignore_callees && root_al &&
2186                   symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187                         /* Treat this symbol as the root,
2188                            forgetting its callees. */
2189                         *root_al = al;
2190                         callchain_cursor_reset(cursor);
2191                 }
2192         }

And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:

1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212                          int max_stack_depth, void *arg)
1213 {
1214         int err, err2;
1215         struct map *alm = NULL;
1216
1217         if (al)
1218                 alm = map__get(al->map);
1219
1220         err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221                                         iter->evsel, al, max_stack_depth);
1222         if (err) {
1223                 map__put(alm);
1224                 return err;
1225         }
1226
1227         err = iter->ops->prepare_entry(iter, al);
1228         if (err)
1229                 goto out;
1230
1231         err = iter->ops->add_single_entry(iter, al);
1232         if (err)
1233                 goto out;
1234

That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:

        iter->ops->add_single_entry(iter, al);

will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!

Signed-off-by: Michael Petlan <mpetlan@redhat.com>
CC: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 1fb7d06a509e ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com
Reported-by: Juri Lelli <jlelli@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused

commit 040b8907ccf1c78d020aca29800036565d761d73 upstream.

With the new static annotation, the compiler warns when the functions
are actually unused:

   drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
    1123 | static int cdn_dp_resume(struct device *dev)
         |            ^~~~~~~~~~~~~

Mark them __maybe_unused to suppress that warning as well.

[ Not so 'new' static annotations any more, and I removed the part of
  the patch that added __maybe_unused to cdn_dp_suspend(), because it's
  used by the shutdown/remove code.

  So only the resume function ends up possibly unused if CONFIG_PM isn't
  set     - Linus ]

Fixes: 7c49abb4c2f8 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: increase timeout in tipc_sk_enqueue()

commit f4bb62e64c88c93060c051195d3bbba804e56945 upstream.

In tipc_sk_enqueue() we use hardcoded 2 jiffies to extract
socket buffer from generic queue to particular socket.
The 2 jiffies is too short in case there are other high priority
tasks get CPU cycles for multiple jiffies update. As result, no
buffer could be enqueued to particular socket.

To solve this, we switch to use constant timeout 20msecs.
Then, the function will be expired between 2 jiffies (CONFIG_100HZ)
and 20 jiffies (CONFIG_1000HZ).

Fixes: c637c1035534 ("tipc: resolve race problem at unicast message reception")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r6040: Restore MDIO clock frequency after MAC reset

commit e3f0cc1a945fcefec0c7c9d9dfd028a51daa1846 upstream.

A number of users have reported that they were not able to get the PHY
to successfully link up, especially after commit c36757eb9dee ("net:
phy: consider AN_RESTART status when reading link status") where we
stopped reading just BMSR, but we also read BMCR to determine the link
status.

Andrius at NetBSD did a wonderful job at debugging the problem
and found out that the MDIO bus clock frequency would be incorrectly set
back to its default value which would prevent the MDIO bus controller
from reading PHY registers properly. Back when we only read BMSR, if we
read all 1s, we could falsely indicate a link status, though in general
there is a cable plugged in, so this went unnoticed. After a second read
of BMCR was added, a wrong read will lead to the inability to determine
a link UP condition which is when it started to be visibly broken, even
if it was long before that.

The fix consists in restoring the value of the MD_CSR register that was
set prior to the MAC reset.

Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494
Fixes: 90f750a81a29 ("r6040: consolidate MAC reset to its own function")
Reported-by: Andrius V <vezhlys@gmail.com>
Reported-by: Darek Strugacz <darek.strugacz@op.pl>
Tested-by: Darek Strugacz <darek.strugacz@op.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/l2tp: Fix reference count leak in l2tp_udp_recv_core

commit 9b6ff7eb666415e1558f1ba8a742f5db6a9954de upstream.

The reference count leak issue may take place in an error handling
path. If both conditions of tunnel->version == L2TP_HDR_VER_3 and the
return value of l2tp_v3_ensure_opt_in_linear is nonzero, the function
would directly jump to label invalid, without decrementing the reference
count of the l2tp_session object session increased earlier by
l2tp_tunnel_get_session(). This may result in refcount leaks.

Fix this issue by decrease the reference count before jumping to the
label invalid.

Fixes: 4522a70db7aa ("l2tp: fix reading optional fields of L2TPv3")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: don't duplicate ccid when cloning dccp sock

commit d9ea761fdd197351890418acd462c51f241014a7 upstream.

Commit 2677d2067731 ("dccp: don't free ccid2_hc_tx_sock ...") fixed
a UAF but reintroduced CVE-2017-6074.

When the sock is cloned, two dccps_hc_tx_ccid will reference to the
same ccid. So one can free the ccid object twice from two socks after
cloning.

This issue was found by "Hadar Manor" as well and assigned with
CVE-2020-16119, which was fixed in Ubuntu's kernel. So here I port
the patch from Ubuntu to fix it.

The patch prevents cloned socks from referencing the same ccid.

Fixes: 2677d2067731410 ("dccp: don't free ccid2_hc_tx_sock ...")
Signed-off-by: Zhenpeng Lin <zplin@psu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptp: dp83640: don't define PAGE0

commit 7366c23ff492ad260776a3ee1aaabba9fc773a8b upstream.

Building dp83640.c on arch/parisc/ produces a build warning for
PAGE0 being redefined. Since the macro is not used in the dp83640
driver, just make it a comment for documentation purposes.

In file included from ../drivers/net/phy/dp83640.c:23:
../drivers/net/phy/dp83640_reg.h:8: warning: "PAGE0" redefined
    8 | #define PAGE0                     0x0000
                 from ../drivers/net/phy/dp83640.c:11:
../arch/parisc/include/asm/page.h:187: note: this is the location of the previous definition
  187 | #define PAGE0   ((struct zeropage *)__PAGE_OFFSET)

Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210913220605.19682-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-caif: avoid user-triggerable WARN_ON(1)

commit 550ac9c1aaaaf51fd42e20d461f0b1cdbd55b3d2 upstream.

syszbot triggers this warning, which looks something
we can easily prevent.

If we initialize priv->list_field in chnl_net_init(),
then always use list_del_init(), we can remove robust_list_del()
completely.

WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 robust_list_del net/caif/chnl_net.c:67 [inline]
WARNING: CPU: 0 PID: 3233 at net/caif/chnl_net.c:67 chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Modules linked in:
CPU: 0 PID: 3233 Comm: syz-executor.3 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:robust_list_del net/caif/chnl_net.c:67 [inline]
RIP: 0010:chnl_net_uninit+0xc9/0x2e0 net/caif/chnl_net.c:375
Code: 89 eb e8 3a a3 ba f8 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 bf 01 00 00 48 81 fb 00 14 4e 8d 48 8b 2b 75 d0 e8 17 a3 ba f8 <0f> 0b 5b 5d 41 5c 41 5d e9 0a a3 ba f8 4c 89 e3 e8 02 a3 ba f8 4c
RSP: 0018:ffffc90009067248 EFLAGS: 00010202
RAX: 0000000000008780 RBX: ffffffff8d4e1400 RCX: ffffc9000fd34000
RDX: 0000000000040000 RSI: ffffffff88bb6e49 RDI: 0000000000000003
RBP: ffff88802cd9ee08 R08: 0000000000000000 R09: ffffffff8d0e6647
R10: ffffffff88bb6dc2 R11: 0000000000000000 R12: ffff88803791ae08
R13: dffffc0000000000 R14: 00000000e600ffce R15: ffff888073ed3480
FS:  00007fed10fa0700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2c322000 CR3: 00000000164a6000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 register_netdevice+0xadf/0x1500 net/core/dev.c:10347
 ipcaif_newlink+0x4c/0x260 net/caif/chnl_net.c:468
 __rtnl_newlink+0x106d/0x1750 net/core/rtnetlink.c:3458
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3506
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 __sys_sendto+0x21c/0x320 net/socket.c:2036
 __do_sys_sendto net/socket.c:2048 [inline]
 __se_sys_sendto net/socket.c:2044 [inline]
 __x64_sys_sendto+0xdd/0x1b0 net/socket.c:2044
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: cc36a070b590 ("net-caif: add CAIF netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert

commit 7c3a0a018e672a9723a79b128227272562300055 upstream.

Remove the assert from the callback priv lookup function since it does
not require RTNL lock and is already protected by flow_indr_block_lock.

This will avoid warnings from being emitted to dmesg if the driver
registers its callback after an ingress qdisc was created for a
netdevice.

The warnings started after the following patch was merged:
commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation")

Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: Fix rxnfc copy to user buffer overflow

commit 9b29a161ef38040f000dcf9ccf78e34495edfd55 upstream.

In the cited commit, copy_to_user() got called with the wrong pointer,
instead of passing the actual buffer ptr to copy from, a pointer to
the pointer got passed, which causes a buffer overflow calltrace to pop
up when executing "ethtool -x ethX".

Fix ethtool_rxnfc_copy_to_user() to use the rxnfc pointer as passed
to the function, instead of a pointer to it.

This fixes below call trace:
[   15.533533] ------------[ cut here ]------------
[   15.539007] Buffer overflow detected (8 < 192)!
[   15.544110] WARNING: CPU: 3 PID: 1801 at include/linux/thread_info.h:200 copy_overflow+0x15/0x20
[   15.549308] Modules linked in:
[   15.551449] CPU: 3 PID: 1801 Comm: ethtool Not tainted 5.14.0-rc2+ #1058
[   15.553919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[   15.558378] RIP: 0010:copy_overflow+0x15/0x20
[   15.560648] Code: e9 7c ff ff ff b8 a1 ff ff ff eb c4 66 0f 1f 84 00 00 00 00 00 55 48 89 f2 89 fe 48 c7 c7 88 55 78 8a 48 89 e5 e8 06 5c 1e 00 <0f> 0b 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55
[   15.565114] RSP: 0018:ffffad49c0523bd0 EFLAGS: 00010286
[   15.566231] RAX: 0000000000000000 RBX: 00000000000000c0 RCX: 0000000000000000
[   15.567616] RDX: 0000000000000001 RSI: ffffffff8a7912e7 RDI: 00000000ffffffff
[   15.569050] RBP: ffffad49c0523bd0 R08: ffffffff8ab2ae28 R09: 00000000ffffdfff
[   15.570534] R10: ffffffff8aa4ae40 R11: ffffffff8aa4ae40 R12: 0000000000000000
[   15.571899] R13: 00007ffd4cc2a230 R14: ffffad49c0523c00 R15: 0000000000000000
[   15.573584] FS:  00007f538112f740(0000) GS:ffff96d5bdd80000(0000) knlGS:0000000000000000
[   15.575639] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.577092] CR2: 00007f5381226d40 CR3: 0000000013542000 CR4: 00000000001506e0
[   15.578929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   15.580695] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   15.582441] Call Trace:
[   15.582970]  ethtool_rxnfc_copy_to_user+0x30/0x46
[   15.583815]  ethtool_get_rxnfc.cold+0x23/0x2b
[   15.584584]  dev_ethtool+0x29c/0x25f0
[   15.585286]  ? security_netlbl_sid_to_secattr+0x77/0xd0
[   15.586728]  ? do_set_pte+0xc4/0x110
[   15.587349]  ? _raw_spin_unlock+0x18/0x30
[   15.588118]  ? __might_sleep+0x49/0x80
[   15.588956]  dev_ioctl+0x2c1/0x490
[   15.589616]  sock_ioctl+0x18e/0x330
[   15.591143]  __x64_sys_ioctl+0x41c/0x990
[   15.591823]  ? irqentry_exit_to_user_mode+0x9/0x20
[   15.592657]  ? irqentry_exit+0x33/0x40
[   15.593308]  ? exc_page_fault+0x32f/0x770
[   15.593877]  ? exit_to_user_mode_prepare+0x3c/0x130
[   15.594775]  do_syscall_64+0x35/0x80
[   15.595397]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   15.596037] RIP: 0033:0x7f5381226d4b
[   15.596492] Code: 0f 1e fa 48 8b 05 3d b1 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d b1 0c 00 f7 d8 64 89 01 48
[   15.598743] RSP: 002b:00007ffd4cc2a1f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   15.599804] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5381226d4b
[   15.600795] RDX: 00007ffd4cc2a350 RSI: 0000000000008946 RDI: 0000000000000003
[   15.601712] RBP: 00007ffd4cc2a340 R08: 00007ffd4cc2a350 R09: 0000000000000001
[   15.602751] R10: 00007f538128a990 R11: 0000000000000246 R12: 0000000000000000
[   15.603882] R13: 00007ffd4cc2a350 R14: 00007ffd4cc2a4b0 R15: 0000000000000000
[   15.605042] ---[ end trace 325cf185e2795048 ]---

Fixes: dd98d2895de6 ("ethtool: improve compat ioctl handling")
Reported-by: Shannon Nelson <snelson@pensando.io>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tested-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix an use-after-free issue in tipc_recvmsg

commit cc19862ffe454a5b632ca202e5a51bfec9f89fd2 upstream.

syzbot reported an use-after-free crash:

  BUG: KASAN: use-after-free in tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
  Call Trace:
   tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
   sock_recvmsg_nosec net/socket.c:943 [inline]
   sock_recvmsg net/socket.c:961 [inline]
   sock_recvmsg+0xca/0x110 net/socket.c:957
   tipc_conn_rcv_from_sock+0x162/0x2f0 net/tipc/topsrv.c:398
   tipc_conn_recv_work+0xeb/0x190 net/tipc/topsrv.c:421
   process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
   worker_thread+0x658/0x11f0 kernel/workqueue.c:2422

As Hoang pointed out, it was caused by skb_cb->bytes_read still accessed
after calling tsk_advance_rx_queue() to free the skb in tipc_recvmsg().

This patch is to fix it by accessing skb_cb->bytes_read earlier than
calling tsk_advance_rx_queue().

Fixes: f4919ff59c28 ("tipc: keep the skb in rcv queue until the whole data is read")
Reported-by: syzbot+e6741b97d5552f97c24d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix kern_addr_valid() to cope with existing but not present entries

commit 34b1999da935a33be6239226bfa6cd4f704c5c88 upstream.

Jiri Olsa reported a fault when running:

  # cat /proc/kallsyms | grep ksys_read
  ffffffff8136d580 T ksys_read
  # objdump -d --start-address=0xffffffff8136d580 --stop-address=0xffffffff8136d590 /proc/kcore

  /proc/kcore:     file format elf64-x86-64

  Segmentation fault

  general protection fault, probably for non-canonical address 0xf887ffcbff000: 0000 [#1] SMP PTI
  CPU: 12 PID: 1079 Comm: objdump Not tainted 5.14.0-rc5qemu+ #508
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
  RIP: 0010:kern_addr_valid
  Call Trace:
   read_kcore
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? trace_hardirqs_on
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? rcu_read_lock_sched_held
   ? lock_release
   ? _raw_spin_unlock
   ? __handle_mm_fault
   ? rcu_read_lock_sched_held
   ? lock_acquire
   ? rcu_read_lock_sched_held
   ? lock_release
   proc_reg_read
   ? vfs_read
   vfs_read
   ksys_read
   do_syscall_64
   entry_SYSCALL_64_after_hwframe

The fault happens because kern_addr_valid() dereferences existent but not
present PMD in the high kernel mappings.

Such PMDs are created when free_kernel_image_pages() frees regions larger
than 2Mb. In this case, a part of the freed memory is mapped with PMDs and
the set_memory_np_noalias() -> ... -> __change_page_attr() sequence will
mark the PMD as not present rather than wipe it completely.

Have kern_addr_valid() check whether higher level page table entries are
present before trying to dereference them to fix this issue and to avoid
similar issues in the future.

Stable backporting note:
------------------------

Note that the stable marking is for all active stable branches because
there could be cases where pagetable entries exist but are not valid -
see 9a14aefc1d28 ("x86: cpa, fix lookup_address"), for example. So make
sure to be on the safe side here and use pXY_present() accessors rather
than pXY_none() which could #GP when accessing pages in the direct map.

Also see:

  c40a56a7818c ("x86/mm/init: Remove freed kernel image areas from alias mapping")

for more info.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: <stable@vger.kernel.org> # 4.4+
Link: https://lkml.kernel.org/r/20210819132717.19358-1-rppt@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pat: Pass valid address to sanitize_phys()

commit aeef8b5089b76852bd84889f2809e69a7cfb414e upstream.

The end address passed to memtype_reserve() is handed directly to
sanitize_phys().  However, end is exclusive and sanitize_phys() expects
an inclusive address.  If end falls at the end of the physical address
space, sanitize_phys() will return 0.  This can result in drivers
failing to load, and the following warning:

 WARNING: CPU: 26 PID: 749 at arch/x86/mm/pat.c:354 reserve_memtype+0x262/0x450
 reserve_memtype failed: [mem 0x3ffffff00000-0xffffffffffffffff], req uncached-minus
 Call Trace:
  [<ffffffffa427b1f2>] reserve_memtype+0x262/0x450
  [<ffffffffa42764aa>] ioremap_nocache+0x1a/0x20
  [<ffffffffc04620a1>] mpt3sas_base_map_resources+0x151/0xa60 [mpt3sas]
  [<ffffffffc0465555>] mpt3sas_base_attach+0xf5/0xa50 [mpt3sas]
 ---[ end trace 6d6eea4438db89ef ]---
 ioremap reserve_memtype failed -22
 mpt3sas_cm0: unable to map adapter memory! or resource not found
 mpt3sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10597/_scsih_probe()!

Fix this by passing the inclusive end address to sanitize_phys().

Fixes: 510ee090abc3 ("x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses")
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/x49o8a3pu5i.fsf@segfault.boston.devel.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/sclp: fix Secure-IPL facility detection

commit d76b14f3971a0638b6cd0da289f8b48acee287d0 upstream.

Prevent out-of-range access if the returned SCLP SCCB response is smaller
in size than the address of the Secure-IPL flag.

Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: add missing MMU context put when reaping MMU mapping

commit f2faea8b64125852fa9acc6771c07fc0311a039b upstream.

When we forcefully evict a mapping from the the address space and thus the
MMU context, the MMU context is leaked, as the mapping no longer points to
it, so it doesn't get freed when the GEM object is destroyed. Add the
mssing context put to fix the leak.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: reference MMU context when setting up hardware state

commit d6408538f091fb22d47f792d4efa58143d56c3fb upstream.

Move the refcount manipulation of the MMU context to the point where the
hardware state is programmed. At that point it is also known if a previous
MMU state is still there, or the state needs to be reprogrammed with a
potentially different context.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: fix MMU context leak on GPU reset

commit f978a5302f5566480c58ffae64a16d34456801bd upstream.

After a reset the GPU is no longer using the MMU context and may be
restarted with a different context. While the mmu_state proeprly was
cleared, the context wasn't unreferenced, leading to a memory leak.

Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: exec and MMU state is lost when resetting the GPU

commit 725cbc7884c37f3b4f1777bc1aea6432cded8ca5 upstream.

When the GPU is reset both the current exec state, as well as all MMU
state is lost. Move the driver side state tracking into the reset function
to keep hardware and software state from diverging.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: keep MMU context across runtime suspend/resume

commit 8f3eea9d01d7b0f95b0fe04187c0059019ada85b upstream.

The MMU state may be kept across a runtime suspend/resume cycle, as we
avoid a full hardware reset to keep the latency of the runtime PM small.

Don't pretend that the MMU state is lost in driver state. The MMU
context is pushed out when new HW jobs with a different context are
coming in. The only exception to this is when the GPU is unbound, in
which case we need to make sure to also free the last active context.

Cc: stable@vger.kernel.org # 5.4
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: stop abusing mmu_context as FE running marker

commit 23e0f5a57d0ecec86e1fc82194acd94aede21a46 upstream.

While the DMA frontend can only be active when the MMU context is set, the
reverse isn't necessarily true, as the frontend can be stopped while the
MMU state is kept. Stop treating mmu_context being set as a indication that
the frontend is running and instead add a explicit property.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: put submit prev MMU context when it exists

commit cda7532916f7bc860b36a1806cb8352e6f63dacb upstream.

The prev context is the MMU context at the time of the job
queueing in hardware. As a job might be queued multiple times
due to recovery after a GPU hang, we need to make sure to put
the stale prev MMU context from a prior queuing, to avoid the
reference and thus the MMU context leaking.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: return context from etnaviv_iommu_context_get

commit 78edefc05e41352099ffb8f06f8d9b2d091e29cd upstream.

Being able to have the refcount manipulation in an assignment makes
it much easier to parse the code.

Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/amdgpu: Increase HWIP_MAX_INSTANCE to 10

commit 67a44e659888569a133a8f858c8230e9d7aad1d5 upstream.

Seems like newer cards can have even more instances now.
Found by UBSAN: array-index-out-of-bounds in
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29
index 8 is out of range for type 'uint32_t *[8]'

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697
Cc: stable@vger.kernel.org
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add AMD GPU multi-function power dependencies

commit 60b78ed088ebe1a872ee1320b6c5ad6ee2c4bd9a upstream.

Some AMD GPUs have built-in USB xHCI and USB Type-C UCSI controllers with
power dependencies between the GPU and the other functions as in
6d2e369f0d4c ("PCI: Add NVIDIA GPU multi-function power dependencies").

Add device link support for the AMD integrated USB xHCI and USB Type-C UCSI
controllers.

Without this, runtime power management, including GPU resume and temp and
fan sensors don't work correctly.

Reported-at: https://gitlab.freedesktop.org/drm/amd/-/issues/1704
Link: https://lore.kernel.org/r/20210903063311.3606226-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: base: power: don't try to use non-existing RTC for storing data

commit 0560204b360a332c321124dbc5cdfd3364533a74 upstream.

If there is no legacy RTC device, don't try to use it for storing trace
data across suspend/resume.

Cc: <stable@vger.kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210903084937.19392-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/sve: Use correct size when reinitialising SVE state

commit e35ac9d0b56e9efefaeeb84b635ea26c2839ea86 upstream.

When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.

This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.

Fixes: bc0ee4760364 ("arm64/sve: Core task context handling")
Cc: <stable@vger.kernel.org> # 4.15.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix enabling network interfaces without VFs

commit 52ce14c134a003fee03d8fc57442c05a55b53715 upstream.

This function is called to enable SR-IOV when available,
not enabling interfaces without VFs was a regression.

Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()")
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Reported-by: YunQiang Su <wzssyqa@gmail.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: reset legacy rtc flag for PV domU

commit f68aa100d815b5b4467fd1c3abbe3b99d65fd028 upstream.

A Xen PV guest doesn't have a legacy RTC device, so reset the legacy
RTC flag. Otherwise the following WARN splat will occur at boot:

[    1.333404] WARNING: CPU: 1 PID: 1 at /home/gross/linux/head/drivers/rtc/rtc-mc146818-lib.c:25 mc146818_get_time+0x1be/0x210
[    1.333404] Modules linked in:
[    1.333404] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.14.0-rc7-default+ #282
[    1.333404] RIP: e030:mc146818_get_time+0x1be/0x210
[    1.333404] Code: c0 64 01 c5 83 fd 45 89 6b 14 7f 06 83 c5 64 89 6b 14 41 83 ec 01 b8 02 00 00 00 44 89 63 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 30 0e ef 82 4c 89 e6 e8 71 2a 24 00 48 c7 c0 ff ff
[    1.333404] RSP: e02b:ffffc90040093df8 EFLAGS: 00010002
[    1.333404] RAX: 00000000000000ff RBX: ffffc90040093e34 RCX: 0000000000000000
[    1.333404] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000000000d
[    1.333404] RBP: ffffffff82ef0e30 R08: ffff888005013e60 R09: 0000000000000000
[    1.333404] R10: ffffffff82373e9b R11: 0000000000033080 R12: 0000000000000200
[    1.333404] R13: 0000000000000000 R14: 0000000000000002 R15: ffffffff82cdc6d4
[    1.333404] FS:  0000000000000000(0000) GS:ffff88807d440000(0000) knlGS:0000000000000000
[    1.333404] CS:  10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.333404] CR2: 0000000000000000 CR3: 000000000260a000 CR4: 0000000000050660
[    1.333404] Call Trace:
[    1.333404]  ? wakeup_sources_sysfs_init+0x30/0x30
[    1.333404]  ? rdinit_setup+0x2b/0x2b
[    1.333404]  early_resume_init+0x23/0xa4
[    1.333404]  ? cn_proc_init+0x36/0x36
[    1.333404]  do_one_initcall+0x3e/0x200
[    1.333404]  kernel_init_freeable+0x232/0x28e
[    1.333404]  ? rest_init+0xd0/0xd0
[    1.333404]  kernel_init+0x16/0x120
[    1.333404]  ret_from_fork+0x1f/0x30

Cc: <stable@vger.kernel.org>
Fixes: 8d152e7a5c7537 ("x86/rtc: Replace paravirt rtc check with platform legacy quirk")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210903084937.19392-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: ensure symmetry in handling iter types in loop_rw_iter()

commit 16c8d2df7ec0eed31b7d3b61cb13206a7fb930cc upstream.

When setting up the next segment, we check what type the iter is and
handle it accordingly. However, when incrementing and processed amount
we do not, and both iter advance and addr/len are adjusted, regardless
of type. Split the increment side just like we do on the setup side.

Fixes: 4017eb91a9e7 ("io_uring: make loop_rw_iter() use original user supplied pointers")
Cc: stable@vger.kernel.org
Reported-by: Valentina Palmiotti <vpalmiotti@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix upper limit for max_inline for page size 64K

commit 6f93e834fa7c5faa0372e46828b4b2a966ac61d7 upstream.

The mount option max_inline ranges from 0 to the sectorsize (which is
now equal to page size). But we parse the mount options too early and
before the actual sectorsize is read from the superblock. So the upper
limit of max_inline is unaware of the actual sectorsize and is limited
by the temporary sectorsize 4096, even on a system where the default
sectorsize is 64K.

Fix this by reading the superblock sectorsize before the mount option
parse.

Reported-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: lt9611: Fix handling of 4k panels

commit d1a97648ae028a44536927c87837c45ada7141c9 upstream.

4k requires two dsi pipes, so don't report MODE_OK when only a
single pipe is configured. But rather report MODE_PANEL to
signal that requirements of the panel are not being met.

Reported-by: Peter Collingbourne <pcc@google.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Anibal Limon <anibal.limon@linaro.org>
Tested-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201217140933.1133969-1-robert.foss@linaro.org
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.67

Link: https://lore.kernel.org/r/20210916155753.903069397@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fanotify: limit number of event merge attempts

commit b8cd0ee8cda68a888a317991c1e918a8cba1a568 upstream.

Event merges are expensive when event queue size is large, so limit the
linear search to 128 merge tests.

[Stable backport notes] The following statement from upstream commit is
irrelevant for backport:
-
-In combination with 128 size hash table, there is a potential to merge
-with up to 16K events in the hashed queue.
-
[Stable backport notes] The problem is as old as fanotify and described
in the linked cover letter "Performance improvement for fanotify merge".
This backported patch fixes the performance issue at the cost of merging
fewer potential events.  Fixing the performance issue is more important
than preserving the "event merge" behavior, which was not predictable in
any way that applications could rely on.

Link: https://lore.kernel.org/r/20210304104826.3993892-6-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/linux-fsdevel/20210202162010.305971-1-amir73il@gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210915163334.GD6166@quack2.suse.cz/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Clamp lock region to Bifrost minimum

commit bd7ffbc3ca12629aeb66fb9e28cf42b7f37e3e3b upstream.

When locking a region, we currently clamp to a PAGE_SIZE as the minimum
lock region. While this is valid for Midgard, it is invalid for Bifrost,
where the minimum locking size is 8x larger than the 4k page size. Add a
hardware definition for the minimum lock region size (corresponding to
KBASE_LOCK_REGION_MIN_SIZE_LOG2 in kbase) and respect it.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-4-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Use u64 for size in lock_region

commit a77b58825d7221d4a45c47881c35a47ba003aa73 upstream.

Mali virtual addresses are 48-bit. Use a u64 instead of size_t to ensure
we can express the "lock everything" condition as ~0ULL without
overflow. This code was silently broken on any platform where a size_t
is less than 48-bits; in particular, it was broken on 32-bit armv7
platforms which remain in use with panfrost. (Mainly RK3288)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-3-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Simplify lock_region calculation

commit b5fab345654c603c07525100d744498f28786929 upstream.

In lock_region, simplify the calculation of the region_width parameter.
This field is the size, but encoded as ceil(log2(size)) - 1.
ceil(log2(size)) may be computed directly as fls(size - 1). However, we
want to use the 64-bit versions as the amount to lock can exceed
32-bits.

This avoids undefined (and completely wrong) behaviour when locking all
memory (size ~0). In this case, the old code would "round up" ~0 to the
nearest page, overflowing to 0. Since fls(0) == 0, this would calculate
a region width of 10 + 0 = 10. But then the code would shift by
(region_width - 11) = -1. As shifting by a negative number is undefined,
UBSAN flags the bug. Of course, even if it were defined the behaviour is
wrong, instead of locking all memory almost none would get locked.

The new form of the calculation corrects this special case and avoids
the undefined behaviour.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-and-tested-by: Chris Morgan <macromorgan@hotmail.com>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-2-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Update bounding box states (v2)

commit a7a9d11e12fcc32160d55e8612e72e5ab51b15dc upstream.

[Why]
Drop hardcoded dispclk, dppclk, phyclk

[How]
Read the corresponding values from clock table entries already populated.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Cc: stable@vger.kernel.org
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Update number of DCN3 clock states

commit 0bbf06d888734041e813b916d7821acd4f72005a upstream.

[Why & How]
The DCN3 SoC parameter num_states was calculated but not saved into the
object.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Cc: stable@vger.kernel.org
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix BUG_ON assert

commit ea7acd7c5967542353430947f3faf699e70602e5 upstream.

With added CPU domain to placement you can have
now 3 placemnts at once.

CC: stable@kernel.org
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-5-andrey.grodzovsky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Make sure MMU context lifetime is not bound to panfrost_priv

commit 7fdc48cc63a30fa3480d18bdd8c5fff2b9b15212 upstream.

Jobs can be in-flight when the file descriptor is closed (either because
the process did not terminate properly, or because it didn't wait for
all GPU jobs to be finished), and apparently panfrost_job_close() does
not cancel already running jobs. Let's refcount the MMU context object
so it's lifetime is no longer bound to the FD lifetime and running jobs
can finish properly without generating spurious page faults.

Reported-by: Icecream95 <ixn@keemail.me>
Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621133907.1683899-2-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp_mst: Fix return code on sideband message failure

commit 92bd92c44d0d9be5dcbcda315b4be4b909ed9740 upstream.

Commit 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing +
selftests") added some debug code for sideband message tracing. But
it seems to have unintentionally changed the behavior on sideband message
failure. It catches and returns failure only if DRM_UT_DP is enabled.
Otherwise it ignores the error code and returns success. So on an MST
unplug, the caller is unaware that the clear payload message failed and
ends up waiting for 4 seconds for the response. Fixes the issue by
returning the proper error code.

Changes in V2:
-- Revise commit text as review comment
-- add Fixes text

Changes in V3:
-- remove "unlikely" optimization

Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1625585434-9562-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msi/mdp4: populate priv->kms in mdp4_kms_init

commit cb0927ab80d224c9074f53d1a55b087d12ec5a85 upstream.

Without this fix boot throws NULL ptr exception at msm_dsi_manager_setup_encoder
on devices like Nexus 7 2013 (MDP4 v4.4).

Fixes: 03436e3ec69c ("drm/msm/dsi: Move setup_encoder to modeset_init")

Cc: <stable@vger.kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210811170631.39296-1-david@ixit.cz
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mgag200: Select clock in PLL update functions

commit 147696720eca12ae48d020726208b9a61cdd80bc upstream.

Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.

The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.

v2:
* don't duplicate <MISC> update code (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lantiq_gswip: fix maximum frame length

commit 552799f8b3b0074d2617f53a63a088f9514a66e3 upstream.

Currently, outgoing packets larger than 1496 bytes are dropped when
tagged VLAN is used on a switch port.

Add the frame check sequence length to the value of the register
GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver,
which uses a value consisting of 1518 bytes for the MAC frame, plus the
lengths of special tag and VLAN tags.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/test_stackinit: Fix static initializer test

commit f9398f15605a50110bf570aaa361163a85113dd1 upstream.

The static initializer test got accidentally converted to a dynamic
initializer. Fix this and retain the giant padding hole without using
an aligned struct member.

Fixes: 50ceaa95ea09 ("lib: Introduce test_stackinit module")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210723221933.3431999-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/chrome: cros_ec_proto: Send command again when timeout occurs

commit 3abc16af57c9939724df92fcbda296b25cc95168 upstream.

Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.

Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm/pmem: Fix crash triggered when I/O in-flight during unbind

commit 32b2397c1e56f33b0b1881def965bb89bd12f448 upstream.

There is a use after free crash when the pmem driver tears down its
mapping while I/O is still inbound.

This is triggered by driver unbind, "ndctl destroy-namespace", while I/O
is in flight.

Fix the sequence of blk_cleanup_queue() vs memunmap().

The crash signature is of the form:

 BUG: unable to handle page fault for address: ffffc90080200000
 CPU: 36 PID: 9606 Comm: systemd-udevd
 Call Trace:
  ? pmem_do_bvec+0xf9/0x3a0
  ? xas_alloc+0x55/0xd0
  pmem_rw_page+0x4b/0x80
  bdev_read_page+0x86/0xb0
  do_mpage_readpage+0x5d4/0x7a0
  ? lru_cache_add+0xe/0x10
  mpage_readpages+0xf9/0x1c0
  ? bd_link_disk_holder+0x1a0/0x1a0
  blkdev_readpages+0x1d/0x20
  read_pages+0x67/0x1a0

  ndctl Call Trace in vmcore:
  PID: 23473  TASK: ffff88c4fbbe8000  CPU: 1   COMMAND: "ndctl"
  __schedule
  schedule
  blk_mq_freeze_queue_wait
  blk_freeze_queue
  blk_cleanup_queue
  pmem_release_queue
  devm_action_release
  release_nodes
  devres_release_all
  device_release_driver_internal
  device_driver_detach
  unbind_store

Cc: <stable@vger.kernel.org>
Signed-off-by: sumiyawang <sumiyawang@tencent.com>
Reviewed-by: yongduan <yongduan@tencent.com>
Link: https://lore.kernel.org/r/1629632949-14749-1-git-send-email-sumiyawang@tencent.com
Fixes: 50f44ee7248a ("mm/devm_memremap_pages: fix final page put race")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: enable accounting for pids in nested pid namespaces

commit fab827dbee8c2e06ca4ba000fa6c48bcf9054aba upstream.

Commit 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
enabled memcg accounting for pids allocated from init_pid_ns.pid_cachep,
but forgot to adjust the setting for nested pid namespaces.  As a result,
pid memory is not accounted exactly where it is really needed, inside
memcg-limited containers with their own pid namespaces.

Pid was one the first kernel objects enabled for memcg accounting.
init_pid_ns.pid_cachep marked by SLAB_ACCOUNT and we can expect that any
new pids in the system are memcg-accounted.

Though recently I've noticed that it is wrong.  nested pid namespaces
creates own slab caches for pid objects, nested pids have increased size
because contain id both for all parent and for own pid namespaces.  The
problem is that these slab caches are _NOT_ marked by SLAB_ACCOUNT, as a
result any pids allocated in nested pid namespaces are not
memcg-accounted.

Pid struct in nested pid namespace consumes up to 500 bytes memory, 100000
such objects gives us up to ~50Mb unaccounted memory, this allow container
to exceed assigned memcg limits.

Link: https://lkml.kernel.org/r/8b6de616-fd1a-02c6-cbdb-976ecdcfa604@virtuozzo.com
Fixes: 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm,vmscan: fix divide by zero in get_scan_count

commit 32d4f4b782bb8f0ceb78c6b5dc46eb577ae25bf7 upstream.

Commit f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to
proportional memory.low reclaim") introduced a divide by zero corner
case when oomd is being used in combination with cgroup memory.low
protection.

When oomd decides to kill a cgroup, it will force the cgroup memory to
be reclaimed after killing the tasks, by writing to the memory.max file
for that cgroup, forcing the remaining page cache and reclaimable slab
to be reclaimed down to zero.

Previously, on cgroups with some memory.low protection that would result
in the memory being reclaimed down to the memory.low limit, or likely
not at all, having the page cache reclaimed asynchronously later.

With f56ce412a59d the oomd write to memory.max tries to reclaim all the
way down to zero, which may race with another reclaimer, to the point of
ending up with the divide by zero below.

This patch implements the obvious fix.

Link: https://lkml.kernel.org/r/20210826220149.058089c6@imladris.surriel.com
Fixes: f56ce412a59d ("mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim")
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: initialize hugetlb_usage in mm_init

commit 13db8c50477d83ad3e3b9b0ae247e5cd833a7ae4 upstream.

After fork, the child process will get incorrect (2x) hugetlb_usage.  If
a process uses 5 2MB hugetlb pages in an anonymous mapping,

HugetlbPages:    10240 kB

and then forks, the child will show,

HugetlbPages:    20480 kB

The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child.  Child will have 2x actual usage.

Fix this by adding hugetlb_count_init in mm_init.

Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com
Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hmm: bypass devmap pte when all pfn requested flags are fulfilled

commit 4b42fb213678d2b6a9eeea92a9be200f23e49583 upstream.

Previously, we noticed the one rpma example was failed[1] since commit
36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()"), where it
will use ODP feature to do RDMA WRITE between fsdax files.

After digging into the code, we found hmm_vma_handle_pte() will still
return EFAULT even though all the its requesting flags has been
fulfilled.  That's because a DAX page will be marked as (_PAGE_SPECIAL |
PAGE_DEVMAP) by pte_mkdevmap().

Link: https://github.com/pmem/rpma/issues/1142
Link: https://lkml.kernel.org/r/20210830094232.203029-1-lizhijian@cn.fujitsu.com
Fixes: 405506274922 ("mm/hmm: add missing call to hmm_pte_need_fault in HMM_PFN_SPECIAL handling")
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix hugetlb cgroup refcounting during vma split

commit 09a26e832705fdb7a9484495b71a05e0bbc65207 upstream.

Guillaume Morin reported hitting the following WARNING followed by GPF or
NULL pointer deference either in cgroups_destroy or in the kill_css path.:

    percpu ref (css_release) <= 0 (-1) after switching to atomic
    WARNING: CPU: 23 PID: 130 at lib/percpu-refcount.c:196 percpu_ref_switch_to_atomic_rcu+0x127/0x130
    CPU: 23 PID: 130 Comm: ksoftirqd/23 Kdump: loaded Tainted: G           O      5.10.60 #1
    RIP: 0010:percpu_ref_switch_to_atomic_rcu+0x127/0x130
    Call Trace:
       rcu_core+0x30f/0x530
       rcu_core_si+0xe/0x10
       __do_softirq+0x103/0x2a2
       run_ksoftirqd+0x2b/0x40
       smpboot_thread_fn+0x11a/0x170
       kthread+0x10a/0x140
       ret_from_fork+0x22/0x30

Upon further examination, it was discovered that the css structure was
associated with hugetlb reservations.

For private hugetlb mappings the vma points to a reserve map that
contains a pointer to the css.  At mmap time, reservations are set up
and a reference to the css is taken.  This reference is dropped in the
vma close operation; hugetlb_vm_op_close.  However, if a vma is split no
additional reference to the css is taken yet hugetlb_vm_op_close will be
called twice for the split vma resulting in an underflow.

Fix by taking another reference in hugetlb_vm_op_open.  Note that the
reference is only taken for the owner of the reserve map.  In the more
common fork case, the pointer to the reserve map is cleared for
non-owning vmas.

Link: https://lkml.kernel.org/r/20210830215015.155224-1-mike.kravetz@oracle.com
Fixes: e9fe92ae0cd2 ("hugetlb_cgroup: add reservation accounting for private mappings")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Guillaume Morin <guillaume@morinfr.org>
Suggested-by: Guillaume Morin <guillaume@morinfr.org>
Tested-by: Guillaume Morin <guillaume@morinfr.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pv: fix the forcing of the swiotlb

commit 93ebb6828723b8aef114415c4dc3518342f7dcad upstream.

Since commit 903cd0f315fe ("swiotlb: Use is_swiotlb_force_bounce for
swiotlb data bouncing") if code sets swiotlb_force it needs to do so
before the swiotlb is initialised. Otherwise
io_tlb_default_mem->force_bounce will not get set to true, and devices
that use (the default) swiotlb will not bounce despite switolb_force
having the value of SWIOTLB_FORCE.

Let us restore swiotlb functionality for PV by fulfilling this new
requirement.

This change addresses what turned out to be a fragility in
commit 64e1f0c531d1 ("s390/mm: force swiotlb for protected
virtualization"), which ain't exactly broken in its original context,
but could give us some more headache if people backport the broken
change and forget this fix.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 903cd0f315fe ("swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing")
Fixes: 64e1f0c531d1 ("s390/mm: force swiotlb for protected virtualization")
Cc: stable@vger.kernel.org #5.3+
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: powernv: Fix init_chip_info initialization in numa=off

commit f34ee9cb2c5ac5af426fee6fa4591a34d187e696 upstream.

In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.

Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask

Fixes: 053819e0bf84 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Sync queue idx with queue_pair_map idx

commit c8fadf019964d0eb1da410ba8b629494d3339db9 upstream.

The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.

An index of queue_pair_map also gets set to 0.

qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);

        set_bit(qpair_id, ha->qpair_qid_map);
        ha->queue_pair_map[qpair_id] = qpair;

In the alloc_queue callback driver checks the map, if queue is already
allocated:

ha->queue_pair_map[qidx]

This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.

[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G          IOE    --------- -  - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS:  0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503]  ? check_preempt_curr+0x62/0x90
[ 1572.354506]  ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509]  ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511]  ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515]  ? __switch_to_asm+0x35/0x70
[ 1572.354516]  ? __switch_to_asm+0x41/0x70
[ 1572.354518]  ? __switch_to_asm+0x35/0x70
[ 1572.354519]  ? __switch_to_asm+0x41/0x70
[ 1572.354521]  ? __switch_to_asm+0x35/0x70
[ 1572.354522]  ? __switch_to_asm+0x41/0x70
[ 1572.354523]  ? __switch_to_asm+0x35/0x70
[ 1572.354525]  ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527]  ? __switch_to_asm+0x41/0x70
[ 1572.354529]  ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531]  ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532]  ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535]  ? process_one_work+0x1a7/0x360
[ 1572.354537]  ? create_worker+0x1a0/0x1a0
[ 1572.354538]  ? worker_thread+0x30/0x390
[ 1572.354540]  ? create_worker+0x1a0/0x1a0
[ 1572.354541]  ? kthread+0x116/0x130
[ 1572.354543]  ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545]  ? ret_from_fork+0x35/0x40

Fix is to use index 0 for admin and first IO queue.

Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Changes to support kdump kernel

commit 62e0dec59c1e139dab55aff5aa442adc97804271 upstream.

Avoid allocating firmware dump and only allocate a single queue for a kexec
kernel.

Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: BusLogic: Fix missing pr_cont() use

commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.

Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled
, SCAM: Disabled

scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

back to order:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958

Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:

pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30:  1 ==>  1: 01
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
blogic_cmd(04) Status = 30:  4 ==>  4: 41 41 35 30
blogic_cmd(0B) Status = 30:  3 ==>  3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30:  1 ==>  1: 37
blogic_cmd(8B) Status = 30:  5 ==>  5: 39 35 38 20 20
blogic_cmd(85) Status = 30:  1 ==>  1: 42
blogic_cmd(86) Status = 30:  4 ==>  4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter

etc.

Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()

commit 52d5a0c6bd8a89f460243ed937856354f8f253a3 upstream.

If function ovl_instantiate() returns an error, ovl_cleanup will be called
and try to remove newdentry from wdir, but the newdentry has been moved to
udir at this time.  This will causes BUG_ON(victim->d_parent->d_inode !=
dir) in fs/namei.c:may_delete.

Signed-off-by: chenying <chenying.kernel@bytedance.com>
Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly created inode")
Link: https://lore.kernel.org/linux-unionfs/e6496a94-a161-dc04-c38a-d2544633acb4@bytedance.com/
Cc: <stable@vger.kernel.org> # v4.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix crash with signals and alloca

commit 030f653078316a9cc9ca6bd1b0234dcf858be35d upstream.

I was debugging some crashes on parisc and I found out that there is a
crash possibility if a function using alloca is interrupted by a signal.
The reason for the crash is that the gcc alloca implementation leaves
garbage in the upper 32 bits of the sp register. This normally doesn't
matter (the upper bits are ignored because the PSW W-bit is clear),
however the signal delivery routine in the kernel uses full 64 bits of sp
and it fails with -EFAULT if the upper 32 bits are not zero.

I created this program that demonstrates the problem:

#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <alloca.h>

static __attribute__((noinline,noclone)) void aa(int *size)
{
void * volatile p = alloca(-*size);
while (1) ;
}

static void handler(int sig)
{
write(1, "signal delivered\n", 17);
_exit(0);
}

int main(void)
{
int size = -0x100;
signal(SIGALRM, handler);
alarm(1);
aa(&size);
}

If you compile it with optimizations, it will crash.
The "aa" function has this disassembly:

000106a0 <aa>:
   106a0:       08 03 02 41     copy r3,r1
   106a4:       08 1e 02 43     copy sp,r3
   106a8:       6f c1 00 80     stw,ma r1,40(sp)
   106ac:       37 dc 3f c1     ldo -20(sp),ret0
   106b0:       0c 7c 12 90     stw ret0,8(r3)
   106b4:       0f 40 10 9c     ldw 0(r26),ret0 ; ret0 = 0x00000000FFFFFF00
   106b8:       97 9c 00 7e     subi 3f,ret0,ret0 ; ret0 = 0xFFFFFFFF0000013F
   106bc:       d7 80 1c 1a     depwi 0,31,6,ret0 ; ret0 = 0xFFFFFFFF00000100
   106c0:       0b 9e 0a 1e     add,l sp,ret0,sp ;   sp = 0xFFFFFFFFxxxxxxxx
   106c4:       e8 1f 1f f7     b,l,n 106c4 <aa+0x24>,r0

This patch fixes the bug by truncating the "usp" variable to 32 bits.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: remove duplicated io_size from rw

[ Upstream commit 632546c4b5a4dad8e3ac456406c65c0db9a0b570 ]

io_size and iov_count in io_read() and io_write() hold the same value,
kill the last one.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/io_uring Don't use the return value from import_iovec().

[ Upstream commit 10fc72e43352753a08f9cf83aa5c40baec00d212 ]

This is the only code that relies on import_iovec() returning
iter.count on success.
This allows a better interface to import_iovec().

Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: clean up a type mismatch warning

[ Upstream commit e79c0e324b011b0288cd411a5b53870a7730f163 ]

abs() returns signed long, which could not convert the type
as unsigned, and it may cause a mismatch type warning from
static tools. To fix it, this patch uses an variable to save
the abs()'s result and does a explicit conversion.

Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: w5100: check return value after calling platform_get_resource()

[ Upstream commit a39ff4a47f3e1da3b036817ef436b1a9be10783a ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fix array-index-out-of-bounds in taprio_change

[ Upstream commit efe487fce3061d94222c6501d7be3aa549b3dc78 ]

syzbot report an array-index-out-of-bounds in taprio_change
index 16 is out of range for type '__u16 [16]'
that's because mqprio->num_tc is lager than TC_MAX_QUEUE,so we check
the return value of netdev_set_num_tc.

Reported-by: syzbot+2b3e5fb6c7ef285a94f6@syzkaller.appspotmail.com
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix NULL pointer reference in cipso_v4_doi_free

[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix sleeping in atomic context

[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ]

The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:

--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
   --> ath9k_hw_reset()
      --> ath9k_hw_gpio_request_in()
         --> ath9k_hw_gpio_request()
            --> ath9k_hw_gpio_cfg_soc()

Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.

Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix OOB read ar9300_eeprom_restore_internal

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]

Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.

There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.

I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>

wcn36xx: Fix missing frame timestamp for beacon/probe-resp

[ Upstream commit 8678fd31f2d3eb14f2b8b39c9bc266f16fa24b22 ]

When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)

This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629992768-23785-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix potential unreleased lock

[ Upstream commit 47bb27a20d6ea22cd092c1fc2bb4fcecac374838 ]

This lock is not released if the program
return at the patched branch.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210827074140.118671-1-cyeaa@connect.ust.hk
Signed-off-by: Sasha Levin <sashal@kernel.org>

parport: remove non-zero check on count

[ Upstream commit 0be883a0d795d9146f5325de582584147dd0dcdc ]

The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.

Note that this code is pre-git history, so I can't find a sha for
it.

Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: DR, Enable QP retransmission

[ Upstream commit ec449ed8230cd30769de3cb70ee0fce293047372 ]

Under high stress, SW steering might get stuck on polling for completion
that never comes.
For such cases QP needs to have protocol retransmission mechanism enabled.
Currently the retransmission timeout is defined as 0 (unlimited). Fix this
by defining a real timeout.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: DR, fix a potential use-after-free bug

[ Upstream commit 6cc64770fb386b10a64a1fe09328396de7bb5262 ]

In line 849 (#1), "mlx5dr_htbl_put(cur_htbl);" drops the reference to
cur_htbl and may cause cur_htbl to be freed.

However, cur_htbl is subsequently used in the next line, which may result
in an use-after-free bug.

Fix this by calling mlx5dr_err() before the cur_htbl is put.

Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Fix scan channel flags settings

[ Upstream commit 090f1be3abf3069ef856b29761f181808bf55917 ]

The iwl_mvm_scan_ch_n_aps_flag() is called with a variable
before the value of the variable is set. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: fw: correctly limit to monitor dump

[ Upstream commit e6344c060209ef4e970cac18adeac1676a2a73cd ]

In commit 79f033f6f229 ("iwlwifi: dbg: don't limit dump decisions
to all or monitor") we changed the code to pass around a bitmap,
but in the monitor_only case, one place accidentally used the bit
number, not the bit mask, resulting in CSR and FW_INFO getting
dumped instead of monitor data. Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: fix access to BSS elements

[ Upstream commit 6c608cd6962ebdf84fd3de6d42f88ed64d2f4e1b ]

BSS elements are protected using RCU, so we need to use
RCU properly to access them, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.fd8b5791ab44.Iba26800a6301078d3782fb249c476dd8ac2bf3c6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: avoid static queue number aliasing

[ Upstream commit c6ce1c74ef2923b8ffd85f7f8b486f804f343b39 ]

When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then
queue numbers are just sequentially assigned 0, 1, 2, ...
Prior to TVQM, in DQA, there were some statically allocated
queue numbers:
 * IWL_MVM_DQA_AUX_QUEUE == 1,
 * both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and
   IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and
 * IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9.

Now, these values are assigned to the members mvm->aux_queue,
mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by
default. Normally, this doesn't really matter, and if TVQM is
in fact available we override them to the real values after
allocating a queue for use there.

However, this allocation doesn't always happen. For example,
for mvm->p2p_dev_queue (== 2) it only happens when the P2P
Device interface is started, if any. If it's not started, the
value in mvm->p2p_dev_queue remains 2. This wouldn't really
matter all that much if it weren't for iwl_mvm_is_static_queue()
which checks a queue number against one of those four static
numbers.

Now, if no P2P Device or monitor interface is added then queue
2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or
mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously
returns true for it. If it then gets full, all interface queues
are stopped, instead of just backpressuring against the one TXQ
that's really the only affected one.

This clearly can lead to issues, as everything is stopped even
if just a single TXQ filled its corresponding HW queue, if it
happens to have an appropriate number (2 or 9, AUX is always
reassigned.) Due to a mac80211 bug, this also led to a situation
in which the queues remained stopped across a deauthentication
and then attempts to connect to a new AP started failing, but
that's fixed separately.

Fix all of this by simply initializing the queue numbers to
the invalid value until they're used, if TVQM is enabled, and
also setting them back to that value when the queues are later
freed again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: fix a memory leak in iwl_mvm_mac_ctxt_beacon_changed

[ Upstream commit 0f5d44ac6e55551798dd3da0ff847c8df5990822 ]

If beacon_inject_active is true, we will return without freeing
beacon.  Fid that by freeing it before returning.

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.d16206ca60fc.I9984a9b442c84814c307cee3213044e24d26f38a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: free RBs during configure

[ Upstream commit 6ac5720086c8b176794eb74c5cc09f8b79017f38 ]

When switching op-modes, or more generally when reconfiguring,
we might switch the RB size. In _iwl_pcie_rx_init() we have a
comment saying we must free all RBs since we might switch the
size, but this is actually too late: the switch has been done
and we'll free the buffers with the wrong size.

Fix this by always freeing the buffers, if any, at the start
of configure, instead of only after the size may have changed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.42d7c93279c4.I07f74e65aab0e3d965a81206fcb289dc92d74878@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: fix crash on LOCKT on reexported NFSv3

[ Upstream commit 0bcc7ca40bd823193224e9f38bafbd8325aaf566 ]

Unlike other filesystems, NFSv3 tries to use fl_file in the GETLK case.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Account for SH/SE count when setting up cu masks.

[ Upstream commit 1ec06c2dee679e9f089e78ed20cb74ee90155f61 ]

On systems with multiple SH per SE compute_static_thread_mgmt_se#
is split into independent masks, one for each SH, in the upper and
lower 16 bits.  We need to detect this and apply cu masking to each
SH.  The cu mask bits are assigned first to each SE, then to
alternate SHs, then finally to higher CU id.  This ensures that
the maximum number of SPIs are engaged as early as possible while
balancing CU assignment to each SH.

v2: Use max SH/SE rather than max SH in cu_per_sh.

v3: Fix comment blocks, ensure se_mask is initially zero filled,
    and correctly assign se.sh.cu positions to unset bits in cu_mask.

Signed-off-by: Sean Keely <Sean.Keely@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B

[ Upstream commit 1bf56843e664eef2525bdbfae6a561e98910f676 ]

- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
- DSP_B: PCM no delay mode, L data MSB during FRM LRC

Signed-off-by: Xiaotan Luo <lxt@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-3-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rockchip: i2s: Fix regmap_ops hang

[ Upstream commit 53ca9b9777b95cdd689181d7c547e38dc79adad0 ]

API 'set_fmt' maybe called when PD is off, in the situation,
any register access will hang the system. so, enable PD
before r/w register.

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-4-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip:vhci_hcd USB port can get stuck in the disabled state

[ Upstream commit 66cce9e73ec61967ed1f97f30cee79bd9a2bb7ee ]

When a remote usb device is attached to the local Virtual USB
Host Controller Root Hub port, the bound device driver may send
a port reset command.

vhci_hcd accepts port resets only when the device doesn't have
port address assigned to it. When reset happens device is in
assigned/used state and vhci_hcd rejects it leaving the port in
a stuck state.

This problem was found when a blue-tooth or xbox wireless dongle
was passed through using usbip.

A few drivers reset the port during probe including mt76 driver
specific to this bug report. Fix the problem with a change to
honor reset requests when device is in used state (VDEV_ST_USED).

Reported-and-tested-by: Michael <msbroadf@gmail.com>
Suggested-by: Michael <msbroadf@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip: give back URBs for unsent unlink requests during cleanup

[ Upstream commit 258c81b341c8025d79073ce2d6ce19dcdc7d10d2 ]

In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are
not given back. This sometimes causes usb_kill_urb to wait indefinitely
for that urb to be given back. syzbot has reported a hung task issue [1]
for this.

To fix this, give back the urbs corresponding to unsent unlink requests
(unlink_tx list) similar to how urbs corresponding to unanswered unlink
requests (unlink_rx list) are given back.

[1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76

Reported-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Tested-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210820190122.16379-2-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: musb_dsps: request_irq() after initializing musb

[ Upstream commit 7c75bde329d7e2a93cf86a5c15c61f96f1446cdc ]

If IRQ occurs between calling  dsps_setup_optional_vbus_irq()
and  dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.

The patch puts initializing of neccesery data before registration
of the interrupt handler.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819163323.17714-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"

[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]

This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.

That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.

Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2

After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.

Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.

exit latency calculations have been revised since then

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix wrong release in sess_alloc_buffer() failed path

[ Upstream commit d72c74197b70bc3c95152f351a568007bffa3e11 ]

smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.

Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: core: Return correct emmc response in case of ioctl error

[ Upstream commit e72a55f2e5ddcfb3dce0701caf925ce435b87682 ]

When a read/write command is sent via ioctl to the kernel,
and the command fails, the actual error response of the emmc
is not sent to the user.

IOCTL read/write tests are carried out using commands
17 (Single BLock Read), 24 (Single Block Write),
18 (Multi Block Read), 25 (Multi Block Write)

The tests are carried out on a 64Gb emmc device. All of these
tests try to access an "out of range" sector address (0x09B2FFFF).

It is seen that without the patch the response received by the user
is not OUT_OF_RANGE error (R1 response 31st bit is not set) as per
JEDEC specification. After applying the patch proper response is seen.
This is because the function returns without copying the response to
the user in case of failure. This patch fixes the issue.

Hence, this memcpy is required whether we get an error response or not.
Therefor it is moved up from the current position up to immediately
after we have called mmc_wait_for_req().

The test code and the output of only the CMD17 is included in the
commit to limit the message length.

CMD17 (Test Code Snippet):
==========================
        printf("Forming CMD%d\n", opt_idx);
        /*  single block read */
        cmd.blksz = 512;
        cmd.blocks = 1;
        cmd.write_flag = 0;
        cmd.opcode = 17;
        //cmd.arg = atoi(argv[3]);
        cmd.arg = 0x09B2FFFF;
        /* Expecting response R1B */
        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;

        memset(data, 0, sizeof(__u8) * 512);
        mmc_ioc_cmd_set_data(cmd, data);

        printf("Sending CMD%d: ARG[0x%08x]\n", opt_idx, cmd.arg);
        if(ioctl(fd, MMC_IOC_CMD, &cmd))
                perror("Error");

        printf("\nResponse: %08x\n", cmd.response[0]);

CMD17 (Output without patch):
=============================
test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 0x09B2FFF]
Forming CMD17
Sending CMD17: ARG[0x09b2ffff]
Error: Connection timed out

Response: 00000000
(Incorrect response)

CMD17 (Output with patch):
==========================
test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
[sudo] password for test:
Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 09B2FFFF]
Forming CMD17
Sending CMD17: ARG[0x09b2ffff]
Error: Connection timed out

Response: 80000900
(Correct OUT_OF_ERROR response as per JEDEC specification)

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20210824191726.8296-1-nishadkamdar@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Enlarge select() timeout for test_maps

[ Upstream commit 2d82d73da35b72b53fe0d96350a2b8d929d07e42 ]

0Day robot observed that it's easily timeout on a heavy load host.
-------------------
 # selftests: bpf: test_maps
 # Fork 1024 tasks to 'test_update_delete'
 # Fork 1024 tasks to 'test_update_delete'
 # Fork 100 tasks to 'test_hashmap'
 # Fork 100 tasks to 'test_hashmap_percpu'
 # Fork 100 tasks to 'test_hashmap_sizes'
 # Fork 100 tasks to 'test_hashmap_walk'
 # Fork 100 tasks to 'test_arraymap'
 # Fork 100 tasks to 'test_arraymap_percpu'
 # Failed sockmap unexpected timeout
 not ok 3 selftests: bpf: test_maps # exit=1
 # selftests: bpf: test_lru_map
 # nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.

In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: rtsx_pci: Fix long reads when clock is prescaled

[ Upstream commit 3ac5e45291f3f0d699a721357380d4593bc2dcb3 ]

For unexplained reasons, the prescaler register for this device needs to
be cleared (set to 1) while performing a data read or else the command
will hang. This does not appear to affect the real clock rate sent out
on the bus, so I assume it's purely to work around a hardware bug.

During normal operation, the prescaler is already set to 1, so nothing
needs to be done. However, in "initial mode" (which is used for sub-MHz
clock speeds, like the core sets while enumerating cards), it's set to
128 and so we need to reset it during data reads. We currently fail to
do this for long reads.

This has no functional affect on the driver's operation currently
written, as the MMC core always sets a clock above 1MHz before
attempting any long reads. However, the core could conceivably set any
clock speed at any time and the driver should still work, so I think
this fix is worthwhile.

I personally encountered this issue while performing data recovery on an
external chip. My connections had poor signal integrity, so I modified
the core code to reduce the clock speed. Without this change, I saw the
card enumerate but was unable to actually read any data.

Writes don't seem to work in the situation described above even with
this change (and even if the workaround is extended to encompass data
write commands). I was not able to find a way to get them working.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-of-arasan: Check return value of non-void funtions

[ Upstream commit 66bad6ed2204fdb78a0a8fb89d824397106a5471 ]

At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.

Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-5-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP

[ Upstream commit c0b4e411a9b09748466ee06d2ae6772effa64dfb ]

SD standard speed timing was met only at 19MHz and not 25 MHz, that's
why changing driver to 19MHz. The reason for this is when a level shifter
is used on the board, timing was met for standard speed only at 19MHz.
Since this level shifter is commonly required for high speed modes,
the driver is modified to use standard speed of 19Mhz.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-2-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: Don't allow __of_attached_node_sysfs() without CONFIG_SYSFS

[ Upstream commit 6211e9cb2f8faf7faae0b6caf844bfe9527cc607 ]

Trying to boot without SYSFS, but with OF_DYNAMIC quickly
results in a crash:

[    0.088460] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
[...]
[    0.103927] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc3 #4179
[    0.105810] Hardware name: linux,dummy-virt (DT)
[    0.107147] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[    0.108876] pc : kernfs_find_and_get_ns+0x3c/0x7c
[    0.110244] lr : kernfs_find_and_get_ns+0x3c/0x7c
[...]
[    0.134087] Call trace:
[    0.134800]  kernfs_find_and_get_ns+0x3c/0x7c
[    0.136054]  safe_name+0x4c/0xd0
[    0.136994]  __of_attach_node_sysfs+0xf8/0x124
[    0.138287]  of_core_init+0x90/0xfc
[    0.139296]  driver_init+0x30/0x4c
[    0.140283]  kernel_init_freeable+0x160/0x1b8
[    0.141543]  kernel_init+0x30/0x140
[    0.142561]  ret_from_fork+0x10/0x18

While not having sysfs isn't a very common option these days,
it is still expected that such configuration would work.

Paper over it by bailing out from __of_attach_node_sysfs() if
CONFIG_SYSFS isn't enabled.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210820144722.169226-1-maz@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>