platform/kernel/u-boot.git
5 years agopico-imx6ul: Convert to CONFIG_DM_GPIO
Fabio Estevam [Thu, 14 Feb 2019 12:01:49 +0000 (10:01 -0200)]
pico-imx6ul: Convert to CONFIG_DM_GPIO

Convert to CONFIG_DM_GPIO.

Also, DM GPIO requires gpio_request() to be called explicitly before
doing any gpio operation, so do as requested.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
5 years agopico-imx6ul: Convert to DM MMC
Fabio Estevam [Thu, 14 Feb 2019 12:01:48 +0000 (10:01 -0200)]
pico-imx6ul: Convert to DM MMC

Select CONFIG_DM_MMC=y in order to support MMC driver model.

This allows the MMC board related code to be removed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
5 years agopico-imx6ul: Select CONFIG_OF_CONTROL
Fabio Estevam [Thu, 14 Feb 2019 12:01:47 +0000 (10:01 -0200)]
pico-imx6ul: Select CONFIG_OF_CONTROL

Select CONFIG_OF_CONTROL and the appropriate device tree files
in preparation for converting to driver model.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
5 years agopico-imx6ul: Import dts files from kernel
Fabio Estevam [Thu, 14 Feb 2019 12:01:46 +0000 (10:01 -0200)]
pico-imx6ul: Import dts files from kernel

Import the device tree files from kernel 5.0-rc6 in preparation
for driver model conversion.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
5 years agoimx8mq_evk_defconfig: Enable pinctrl driver
Chris Spencer [Mon, 4 Feb 2019 10:05:34 +0000 (10:05 +0000)]
imx8mq_evk_defconfig: Enable pinctrl driver

The Ethernet controller is not able to initialise correctly without the
pinctrl driver.

This config setting was enabled in the initial version of this file,
but was removed by a savedefconfig resync because the parameter did not
actually exist at that point.

Fixes: 1bac199e8c87 ("configs: Resync with savedefconfig")
Signed-off-by: Chris Spencer <christopher.spencer@sea.co.uk>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
5 years agopinctrl: add imx8m driver
Peng Fan [Mon, 28 Jan 2019 09:43:42 +0000 (09:43 +0000)]
pinctrl: add imx8m driver

Add i.mx8m pinctrl driver.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-sunxi
Tom Rini [Mon, 11 Mar 2019 19:48:57 +0000 (15:48 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sunxi

- axp818 fix
- fix warnings for ethernet clock code

5 years agoMerge git://git.denx.de/u-boot-x86
Tom Rini [Mon, 11 Mar 2019 15:24:20 +0000 (11:24 -0400)]
Merge git://git.denx.de/u-boot-x86

- ACPI changes and fixes to Intel Tangier/Edison
- i8254 beeper fixes

5 years agox86: crownbay: Enable the beeper sound driver
Bin Meng [Tue, 26 Feb 2019 09:52:22 +0000 (01:52 -0800)]
x86: crownbay: Enable the beeper sound driver

Use the i8254 sound driver to support creating simple beeps.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agox86: coreboot: Add the missing pc speaker node in the device tree
Bin Meng [Tue, 26 Feb 2019 09:52:21 +0000 (01:52 -0800)]
x86: coreboot: Add the missing pc speaker node in the device tree

This is currently missing and without it the i8254 beeper driver
won't work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agox86: Add a dtsi file for the pc speaker
Bin Meng [Tue, 26 Feb 2019 09:52:20 +0000 (01:52 -0800)]
x86: Add a dtsi file for the pc speaker

The pc speaker driven by the i8254 is generic enough to deserve
a single dtsi file to be included by boards that use it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agox86: Make sure i8254 is setup correctly before generating beeps
Bin Meng [Tue, 26 Feb 2019 09:52:19 +0000 (01:52 -0800)]
x86: Make sure i8254 is setup correctly before generating beeps

The i8254 timer control IO port (0x43) should be setup correctly
by using PIT counter 2 to generate beeps, however in U-Boot other
codes like TSC driver utilizes PIT for TSC frequency calibration
and configures the counter 2 to a different mode that does not
beep. Fix this by always ensuring the PIT counter 2 is correctly
initialized so that the i8254 beeper driver works as expected.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-socfpga
Tom Rini [Sun, 10 Mar 2019 14:16:07 +0000 (10:16 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga

- Arria10 DRAM fixes and Gen5 cache fixes

5 years agoMerge branch 'master' of git://git.denx.de/u-boot-sh
Tom Rini [Sun, 10 Mar 2019 14:15:50 +0000 (10:15 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh

- More gen2/gen3 fixes

5 years agox86: edison: Add the rest of UARTs present on board
Andy Shevchenko [Thu, 28 Feb 2019 08:10:07 +0000 (10:10 +0200)]
x86: edison: Add the rest of UARTs present on board

Intel Edison has three UART ports, i.e.
 port 0 - Bluetooth
 port 1 - auxiliary, available for general purpose use
 port 2 - debugging, usually console output is here

Enable all of them for future use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agox86: edison: Use proper number of serial interface
Andy Shevchenko [Thu, 28 Feb 2019 08:10:06 +0000 (10:10 +0200)]
x86: edison: Use proper number of serial interface

The console is actually serial #2. When we would like to enable other ports,
this would be not okay to mess up with the ordering.

Thus, fix the number of default console interface to be 2.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agox86: acpi: Not every platform has serial console a first device
Andy Shevchenko [Thu, 28 Feb 2019 15:19:54 +0000 (17:19 +0200)]
x86: acpi: Not every platform has serial console a first device

We may not do an assumption that current console device is always a first
of UCLASS_SERIAL one.

For example, on properly described Intel Edison board the console UART
is a third one.

Use current serial device as described in global data.

Fixes: a61cbad78e67 ("dm: serial: Adjust serial_getinfo() to use proper API")
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agox86: acpi: Add DMA descriptors for I2C1 on Intel Tangier
Andy Shevchenko [Tue, 26 Feb 2019 11:43:15 +0000 (13:43 +0200)]
x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier

Intel Tangier SoC has a general purpose DMA which can serve to speed up
communications on SPI and I2C serial buses.

Provide DMA descriptors to utilize this capability in the future.

Note, I2C6, which is available to user, has no DMA request lines connected.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agox86: acpi: Add DMA descriptors for SPI5 on Intel Tangier
Andy Shevchenko [Tue, 26 Feb 2019 11:43:14 +0000 (13:43 +0200)]
x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier

Intel Tangier SoC has a general purpose DMA which can serve to speed up
communications on SPI and I2C serial buses.

Provide DMA descriptors to utilize this capability in the future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
5 years agoddr: socfpga: Clean up ddr_setup()
Marek Vasut [Sat, 9 Mar 2019 20:58:09 +0000 (21:58 +0100)]
ddr: socfpga: Clean up ddr_setup()

Replace the current rather convoluted code using ad-hoc polling
mechanism with a more straightforward code. Use wait_for_bit_le32()
to poll the DDRCALSTAT register instead of local reimplementation.
It makes no sense to pull for 5 seconds before giving up and trying
to restart the EMIF, so instead wait 500 mSec for the calibration to
complete and if this fails, restart the EMIF and try again. Perform
this 32 times instead of 3 times as the original code did.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoddr: socfpga: Clean up EMIF reset
Marek Vasut [Sat, 9 Mar 2019 20:57:58 +0000 (21:57 +0100)]
ddr: socfpga: Clean up EMIF reset

The EMIF reset code can well use wait_for_bit_le32() instead of all that
convoluted polling code. Reduce the timeout from 100 seconds to 1 second,
since if the EMIF fails to reset itself in 1 second, it's unlikely longer
wait would help. Make sure to clear the EMIF reset request even if the
SEQ2CORE_INT_RESP_BIT isn't asserted.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoddr: socfpga: Fix EMIF clear timeout
Marek Vasut [Fri, 8 Mar 2019 18:11:55 +0000 (19:11 +0100)]
ddr: socfpga: Fix EMIF clear timeout

The current EMIF clear timeout handling code was applying bitwise
operations to signed data types and as it was, was extremely hard
to read. Replace it with simple wait_for_bit(). Expand the error
handling to make it more readable too.

This patch also changes the timeout for emif_clear() from 14 hours
to 1 second.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoARM: socfpga: Fix A10 SoCDK Kconfig
Marek Vasut [Wed, 6 Mar 2019 19:07:55 +0000 (20:07 +0100)]
ARM: socfpga: Fix A10 SoCDK Kconfig

The Kconfig checked for SoCFPGA Arria10 as a platform, instead of
checking for specific board configuration, which works with one
single platform in tree, but not with multiple. Fix it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoARM: socfpga: Fix Arria10 SPI and NAND U-Boot offset
Marek Vasut [Tue, 8 May 2018 16:44:43 +0000 (18:44 +0200)]
ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offset

The SPL size on Gen5 is 4*64kiB, but on A10 it is 4*256kiB.
Handle the difference.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POS
Marek Vasut [Tue, 8 May 2018 16:44:00 +0000 (18:44 +0200)]
ARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POS

This is not used anywhere, so drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoARM: socfpga: Disable D cache in SPL
Marek Vasut [Tue, 8 May 2018 18:32:01 +0000 (20:32 +0200)]
ARM: socfpga: Disable D cache in SPL

The bootrom seems to leave the D-cache in messed up state, make sure
the SPL disables it so it can not interfere with operation.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoddr: socfpga: Fix newline in debug print on A10
Marek Vasut [Wed, 6 Mar 2019 16:18:22 +0000 (17:18 +0100)]
ddr: socfpga: Fix newline in debug print on A10

The debug print is missing a newline, add it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoddr: socfpga: Fix IO in Arria10 DDR driver
Marek Vasut [Tue, 5 Mar 2019 17:37:02 +0000 (18:37 +0100)]
ddr: socfpga: Fix IO in Arria10 DDR driver

The Altera Arria10 DDR driver was using constants in a few places
instead of reading registers associated with those constants, fix
this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoARM: socfpga: fix data and tag latency values for pl310 cache controller
Dinh Nguyen [Sun, 3 Mar 2019 17:02:10 +0000 (11:02 -0600)]
ARM: socfpga: fix data and tag latency values for pl310 cache controller

The values for the data and tag latency settings on the PL310 caches
controller is an (n-1). For example, the "arm,tag-latency" is specified
as <1 1 1>, so the values that should be written to register should be
0x000. And for the "arm,data-latency" specified as <2 1 1>, the register
value should be 0x010.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
5 years agoARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N
Eugeniu Rosca [Sat, 9 Mar 2019 13:04:57 +0000 (14:04 +0100)]
ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N

v2019.01 commit cbff9f80cedd ("ARM: dts: rmobile: Sync Gen3 DTs with
Linux 4.19.6") made the sdhi/usb nodes available in r8a77965.dtsi.

Hence, remove the SDHI/USB nodes from r8a77965-u-boot.dtsi. This is
equivalent to partially reverting below v2019.01 commits:
 - f529bc551b6d ("ARM: dts: rmobile: Extract USB nodes on M3N")
 - 830b94f76867 ("ARM: dts: rmobile: Extract SDHI nodes on M3N")

Duplicating the nodes from <soc>.dtsi to <soc>-u-boot.dtsi is obviously:
 - not needed if no U-boot-specific changes are needed in those nodes.
 - potentially dangerous/error-prone, since the duplicated properties
   override the properties originally defined in <soc>.dtsi. One
   possible consequence is that <soc>.dtsi is getting an update from
   Linux, while <soc>-u-boot.dtsi stays unchanged. In this situation,
   the obsolete property values from <soc>-u-boot.dtsi will take
   precedence masking some of the <soc>.dtsi updates, potentially
   leading to all kind of obscure issues.

Below is the dtdiff of r8a77965-salvator-x-u-boot.dtb (the only "user"
of r8a77965-u-boot.dtsi) before and after the patch (slightly
reformatted to avoid 'git am/apply' issues and to reduce the width).

What below output means is there is already a mismatch in some of
SDHI/USB nodes between r8a77965.dtsi and r8a77965-u-boot.dtsi. Since no
U-Boot customization is needed in SDHI/USB DT nodes, get rid of them in
r8a77965-u-boot.dtsi.

$> dtdiff before-r8a77965-salvator-x-u-boot.dtb \
           after-r8a77965-salvator-x-u-boot.dtb
 --- /dev/fd/63  2019-03-09 12:57:40.877963983 +0100
 +++ /dev/fd/62  2019-03-09 12:57:40.877963983 +0100
 @@ -1471,7 +1471,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x51 0xc 0x1>;
        clocks = <0x6 0x1 0x13a>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa5 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x4d>;
 @@ -1492,7 +1492,7 @@

      sd@ee120000 {
        clocks = <0x6 0x1 0x139>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa6 0x4>;
        max-frequency = <0xbebc200>;
        power-domains = <0x1 0x20>;
 @@ -1504,7 +1504,7 @@
      sd@ee140000 {
        bus-width = <0x8>;
        clocks = <0x6 0x1 0x138>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        fixed-emmc-driver-type = <0x1>;
        interrupts = <0x0 0xa7 0x4>;
        max-frequency = <0xbebc200>;
 @@ -1526,7 +1526,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x5a 0xf 0x1>;
        clocks = <0x6 0x1 0x137>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa8 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x56>;
 @@ -1868,14 +1868,14 @@

      usb-phy@ee0a0200 {
        #phy-cells = <0x0>;
 -      clocks = <0x6 0x1 0x2be>;
 +      clocks = <0x6 0x1 0x2bf>;
        compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy";
        phandle = <0x47>;
        pinctrl-0 = <0x4c>;
        pinctrl-names = "default";
        power-domains = <0x1 0x20>;
        reg = <0x0 0xee0a0200 0x0 0x700>;
 -      resets = <0x6 0x2be>;
 +      resets = <0x6 0x2bf>;
        status = "okay";
      };

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
5 years agoARM: rmobile: rcar-gen3: Activate bootm_size
Eugeniu Rosca [Tue, 5 Mar 2019 22:13:37 +0000 (23:13 +0100)]
ARM: rmobile: rcar-gen3: Activate bootm_size

v2019.01 commit 07a8060a1277 ("ARM: rmobile: Convert to bootm_size")
attempted converting to bootm_size of 256 MiB below targets:
 - include/configs/alt.h
 - include/configs/gose.h
 - include/configs/koelsch.h
 - include/configs/lager.h
 - include/configs/porter.h
 - include/configs/rcar-gen3-common.h
 - include/configs/silk.h
 - include/configs/stout.h

The update didn't fully work on R-Car3 due to the
CONFIG_SYS_BOOTMAPSZ=8MiB definition left by v2016.09 commit
e525d34b476e ("ARM: rmobile: Add support salvator-x board"),
which is explained in below README excerpt:

----8<----
CONFIG_SYS_BOOTMAPSZ:
                [..] If CONFIG_SYS_BOOTMAPSZ is undefined,
                then the value in "bootm_size" will be used instead.
----8<----

Allow the original commit to accomplish its purpose on R-Car3 targets
by removing the CONFIG_SYS_BOOTMAPSZ definition.

Fixes: 07a8060a1277 ("ARM: rmobile: Convert to bootm_size")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
5 years agoARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{,_FLASH}
Marek Vasut [Tue, 19 Feb 2019 04:07:13 +0000 (05:07 +0100)]
ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{,_FLASH}

Enable DM_SPI and DM_SPI_FLASH in U-Boot on H2 Stout, M2W Porter and E3 Silk.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agoARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
Marek Vasut [Tue, 19 Feb 2019 04:58:24 +0000 (05:58 +0100)]
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI

U-Boot currently uses Gen2 QSPI in 1-bit mode, enforce it until
we can do better using the new SPI NOR framework.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agoclk: sunxi: h3: Implement EPHY CLK and RESET
Jagan Teki [Wed, 27 Feb 2019 18:56:59 +0000 (00:26 +0530)]
clk: sunxi: h3: Implement EPHY CLK and RESET

EPHY CLK and RESET is available in Allwinner H3 EMAC
via mdio-mux node of internal PHY. Add the respective
clock and reset reg and bits.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
5 years agoclk: sunxi: Implement EMAC, GMAC clocks, resets
Jagan Teki [Wed, 27 Feb 2019 18:56:57 +0000 (00:26 +0530)]
clk: sunxi: Implement EMAC, GMAC clocks, resets

- Implement EMAC, GMAC clocks via ccu_clk_gate for
  all supported Allwinner SoCs.
- Implement EMAC, GMAC resets via ccu_reset for all
  supported Allwinner SoCs.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
5 years agoclk: sunxi: Implement A10 EMAC clocks
Jagan Teki [Wed, 27 Feb 2019 18:56:49 +0000 (00:26 +0530)]
clk: sunxi: Implement A10 EMAC clocks

Implement EMAC clocks via ccu_clk_gate for Allwinner A10 SoC.

Which would eventually used in sunxi_emac.c driver.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoMerge branch '2019-03-08-master-imports'
Tom Rini [Fri, 8 Mar 2019 23:04:13 +0000 (18:04 -0500)]
Merge branch '2019-03-08-master-imports'

- Assorted minor fixes:
  - ARM: qemu-arm: enable USB boot in distro boot with UEFI
  - image: fdt: handle coalesced reserve region
  - cmd: thordown: Fix spelling of download.
  - fdt: Fix FIT header verification in mkimage and conduct same checks
    as bootm
  - test: Update test-imagetools.sh to match new syntax

5 years agoARM: qemu-arm: enable USB boot in distro boot with UEFI
AKASHI Takahiro [Fri, 14 Dec 2018 09:53:22 +0000 (18:53 +0900)]
ARM: qemu-arm: enable USB boot in distro boot with UEFI

With this patch which adds a removable USB mass storage to a list
of bootable devices, USB boot is supported in distro boot if UEFI is
configured.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
5 years agoimage: fdt: handle coalesced reserve region
Patrick Delaunay [Wed, 6 Mar 2019 13:23:52 +0000 (14:23 +0100)]
image: fdt: handle coalesced reserve region

Handle in boot_fdt_reserve_region
any return value > 0 of lmb_reserve() function;
it occurs when coalesced region are found:
adjacent reserved region are merged.

This patch avoid the error trace:
  ERROR: reserving fdt memory region failed..
when reserved region are merged (return value = 1).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agocmd: thordown: Fix spelling of download.
Vagrant Cascadian [Wed, 6 Mar 2019 06:52:14 +0000 (22:52 -0800)]
cmd: thordown: Fix spelling of download.

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agofdt: Fix FIT header verification in mkimage and conduct same checks as bootm
Jordan Hand [Tue, 5 Mar 2019 22:47:56 +0000 (14:47 -0800)]
fdt: Fix FIT header verification in mkimage and conduct same checks as bootm

FIT header verification in mkimage was treating a return code as a boolean,
which meant that failures in validating the fit were seen as successes.

Additionally, mkimage was checking all formats to find a header which
passes validation, rather than using the image type specified to
mkimage.

checkpatch.pl checks for lines ending with '(' and alignment matching
open parentheses are ignored to keep with existing coding style.

Signed-off-by: Jordan Hand <jorhand@microsoft.com>
5 years agotest: Update test-imagetools.sh to match new syntax
Martyn Welch [Thu, 14 Feb 2019 13:11:35 +0000 (13:11 +0000)]
test: Update test-imagetools.sh to match new syntax

The syntax of dumpimage was simplified in commit 12b831879a76 ("tools:
dumpimage: Simplify arguments"), but the test
(test/image/test-imagetools.sh) was not updated and is now failing.

Update the test to use the new syntax.

Reported-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-i2c
Tom Rini [Fri, 8 Mar 2019 12:26:29 +0000 (07:26 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-i2c

This pull request contains bugfixes for rcar_i2c, rcar_ii2c and
i2c_cdns driver.

Also the commit "i2c: rcar_i2c: Add Gen3 SoC support" from Marek
is a bugfix for arm64 builds, as discussed with Marek on list.

5 years agopower: axp818: Fix typo in axp_set_dldo
Ondrej Jirman [Wed, 13 Feb 2019 17:51:05 +0000 (18:51 +0100)]
power: axp818: Fix typo in axp_set_dldo

Fix typo in axp_set_dldo() so that it correctly uses AXP818_DLDO1_CTRL
register to configure the voltage instead of setting AXP818_ELDO1_CTRL
register which is obviously incorrect.

Signed-off-by: Ondřej Jirman <megous@megous.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
5 years agoi2c: rcar_i2c: Move FSDA check to rcar_i2c_recover
Ismael Luceno Cortes [Thu, 7 Mar 2019 18:00:55 +0000 (18:00 +0000)]
i2c: rcar_i2c: Move FSDA check to rcar_i2c_recover

Cosmetic change.  Any call to the recover function would need to do the
same check afterwards, so it's sensible to make it part of the function.

Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
5 years agoi2c: rcar_i2c: Set the slave address from rcar_i2c_xfer
Ismael Luceno Cortes [Thu, 7 Mar 2019 18:00:54 +0000 (18:00 +0000)]
i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer

It needs to be done for both reads and writes, so do it at rcar_i2c_xfer
to avoid duplication.

Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer
Ismael Luceno Cortes [Thu, 7 Mar 2019 18:00:53 +0000 (18:00 +0000)]
i2c: rcar_i2c: Don't mask errors with EREMOTEIO at rcar_i2c_xfer

Fix rcar_i2c_xfer return value, previously it was always returning
-EREMOTEIO when dealing with errors from calls to the read/write
functions.

Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: rcar_i2c: Fix sending of slave addresses
Ismael Luceno Cortes [Thu, 7 Mar 2019 18:00:52 +0000 (18:00 +0000)]
i2c: rcar_i2c: Fix sending of slave addresses

Do the reset before clearing the MSR, otherwise it may result in a read
or write operation instead if the start condition is repeated.

Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: rcar_i2c: Add comments about registers & values
Ismael Luceno Cortes [Thu, 7 Mar 2019 18:00:51 +0000 (18:00 +0000)]
i2c: rcar_i2c: Add comments about registers & values

Document the meaning of macros related to registers and values to be
written to them.

Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed
Ismael Luceno Cortes [Thu, 7 Mar 2019 18:00:49 +0000 (18:00 +0000)]
i2c: rcar_i2c: Setup SCL/SDA delay at rcar_i2c_set_speed

Setting up the delay only needs to be done once; move it to
rcar_i2c_set_speed so it's done at initialization time.

Signed-off-by: Ismael Luceno <ismael.luceno@silicon-gears.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: i2c_cdns: Add support for handling arbitration lost
Siva Durga Prasad Paladugu [Thu, 7 Mar 2019 10:52:49 +0000 (11:52 +0100)]
i2c: i2c_cdns: Add support for handling arbitration lost

This patch adds support for handling arbitration lost
in case of multi master mode. When an arbitration lost
is detected, it retries for 10 times before failing.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: i2c_cdns: Fix clearing of all interrupts
Siva Durga Prasad Paladugu [Thu, 7 Mar 2019 10:52:48 +0000 (11:52 +0100)]
i2c: i2c_cdns: Fix clearing of all interrupts

The arbitration lost interrupt was not getting cleared
while clearing interrupts. This patch fixes this by adding
arbitration lost interrupt as well during clear. This patch
also removes hardcoded value and defined a macro for it.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: rcar_i2c: Add Gen3 SoC support
Marek Vasut [Sat, 2 Mar 2019 16:17:11 +0000 (17:17 +0100)]
i2c: rcar_i2c: Add Gen3 SoC support

Add support for R-Car Gen3 SoCs into the driver, which encompases
the Gen3 SoC extra timing register handling and 64bit build fixes.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoi2c: rcar_iic: Read ICSR only once
Marek Vasut [Thu, 7 Mar 2019 02:41:08 +0000 (03:41 +0100)]
i2c: rcar_iic: Read ICSR only once

Read ICSR only once to avoid missing interrupts. This happens on R8A7791
Porter during reset, when reading the PMIC register 0x13, which may fail
sometimes because of the missed DTE interrupt.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-spi
Tom Rini [Thu, 7 Mar 2019 01:25:09 +0000 (20:25 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-spi

- dw spi include file fix
- Allwinner A31 spi, been in ML in many releases.

5 years agoMerge tag 'efi-2019-04-rc4' of https://github.com/xypron2/u-boot
Tom Rini [Tue, 5 Mar 2019 13:51:48 +0000 (08:51 -0500)]
Merge tag 'efi-2019-04-rc4' of https://github.com/xypron2/u-boot

Pull request for the UEFI subsystem for v2019.04-rc4

This pull request contains only bug fixes.

The most notable bug fixed was writing to random memory addresses when
trying to add a HII package of a yet unsupported package type.

5 years agoPrepare v2019.04-rc4 v2019.04-rc3
Tom Rini [Tue, 5 Mar 2019 02:46:24 +0000 (21:46 -0500)]
Prepare v2019.04-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-sh
Tom Rini [Mon, 4 Mar 2019 21:35:40 +0000 (16:35 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-sh

- Assorted PFC fixes

5 years agoMerge tag 'u-boot-atmel-2019.04-a' of git://git.denx.de/u-boot-atmel
Tom Rini [Mon, 4 Mar 2019 18:06:22 +0000 (13:06 -0500)]
Merge tag 'u-boot-atmel-2019.04-a' of git://git.denx.de/u-boot-atmel

First set of u-boot-atmel fixes for 2019.04 cycle

5 years agoMerge git://git.denx.de/u-boot-fsl-qoriq
Tom Rini [Mon, 4 Mar 2019 18:05:53 +0000 (13:05 -0500)]
Merge git://git.denx.de/u-boot-fsl-qoriq

- Enable DHCP as boot-source in distro boot for NXP layerscape
  platforms
- fix register layout for SEC on Layerscape architectures
- fixes related to DPAA2 ethernet

5 years agospi: Rename sun4i_spi.c into spi-sunxi.c
Jagan Teki [Wed, 27 Feb 2019 14:32:13 +0000 (20:02 +0530)]
spi: Rename sun4i_spi.c into spi-sunxi.c

Now the same SPI controller driver is reusable in all Allwinner
SoC variants, so rename the existing sun4i_spi.c into spi-sunxi.c
which eventually look like a common sunxi driver.

Also update the function, variable, structure names in driver from
sun4i into sunxi.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agospi: sun4i: Driver cleanup
Jagan Teki [Wed, 27 Feb 2019 14:32:12 +0000 (20:02 +0530)]
spi: sun4i: Driver cleanup

- drop unused macros.
- use base instead of base_addr, for better code readability
- move .probe and .ofdata_to_platdata functions in required
  places to add platdata support in future.
- use sentinel sun4i_spi_ids.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agospi: sun4: Add A31 spi controller support
Jagan Teki [Wed, 27 Feb 2019 14:32:11 +0000 (20:02 +0530)]
spi: sun4: Add A31 spi controller support

The usual SPI transmission protocol in Allwinner A10 and A31
controllers share similar context with minimal changes in register
offsets along with few additional register bits on A31.

So, add A31 spi controller support in existing sun4i_spi with A31
specific register offsets and bits.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agospi: sun4i: Add CLK support
Jagan Teki [Wed, 27 Feb 2019 14:32:10 +0000 (20:02 +0530)]
spi: sun4i: Add CLK support

Add CLK support to enable AHB and MOD SPI clocks on sun4i_spi driver.

Clock disablement could be done while releasing the bus transfer, but
the existing code doesn't disable the clocks it only taken care of clock
enablement globally in probe.

So to make a proper clock handling, the clocks should enable it in claim
and disable it in release.

This patch would also do that change, by enable and disable clock in
proper order.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
5 years agospi: sun4i: Support fifo_depth via drvdata
Jagan Teki [Wed, 27 Feb 2019 14:32:09 +0000 (20:02 +0530)]
spi: sun4i: Support fifo_depth via drvdata

Support fifo_depth via drvdata instead of macro definition, this would
eventually reduce another macro definition for new SPI controller fifo
depth support addition.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
5 years agospi: sun4i: Access registers and bits via enum offsets
Jagan Teki [Wed, 27 Feb 2019 14:32:08 +0000 (20:02 +0530)]
spi: sun4i: Access registers and bits via enum offsets

Allwinner support two different SPI controllers one for A10 and
another for A31 with minimal changes in register offsets and
respective register bits, but the logic for accessing the SPI
master via SPI slave remains nearly similar.

Add enum offsets for register set and register bits, so-that
it can access both classes of SPI controllers.

Assign same control register for global, transfer and fifo control
registers to make the same code compatible with A31 SPI controller.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Stefan Mavrodiev <stefan@olimex.com> # A20-SOM204
5 years agospi: sun4i: Simplify reg writes using set/clrbits_le32
Jagan Teki [Wed, 27 Feb 2019 14:32:07 +0000 (20:02 +0530)]
spi: sun4i: Simplify reg writes using set/clrbits_le32

Update the existing register writes using setbits_le32 and
clrbits_le32 in required places.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoclk: sunxi: Implement SPI clocks, resets
Jagan Teki [Wed, 27 Feb 2019 14:32:06 +0000 (20:02 +0530)]
clk: sunxi: Implement SPI clocks, resets

- Implement SPI AHB, MOD clocks via ccu_clk_gate for all
  supported Allwinner SoCs
- Implement SPI resets via ccu_reset for all supported
  Allwinner SoCs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
5 years agospi: sun4i: Poll for rxfifo to be filled up
Jagan Teki [Wed, 27 Feb 2019 14:32:05 +0000 (20:02 +0530)]
spi: sun4i: Poll for rxfifo to be filled up

To drain rx fifo the fifo need to poll for how much data has
been filled up in rx fifo.

To achieve this, the current code is using wait_for_bit logic
on control register with exchange burst mode mask, which is not
a proper way of waiting for fifo filled up.

So, add code for polling rxfifo to be filled up using fifo
status register.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
5 years agospi: designware: Change include order
Horatiu.Vultur@microchip.com [Mon, 25 Feb 2019 10:59:54 +0000 (10:59 +0000)]
spi: designware: Change include order

With current order of include files, the file designware_spi.c
can't see that the struct global_data has the member
board_type when CONFIG_BOARD_TYPES is defined. By not seeing this
then all the members are shifted in the struct global_data.
So when the driver is trying to read from device tree blob, it
would pass the wrong address to the function 'fdtdev_get_int'.
This will make to use the default frequency 500000.

The fix consists of changing the order of include files in
designware_spi.c to include first common.h file.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
5 years agoconfigs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configs
Eugen Hristev [Fri, 8 Feb 2019 08:57:01 +0000 (10:57 +0200)]
configs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configs

SPL_GENERATE_ATMEL_PMECC_HEADER will generate a header for the SPL for NAND
information. The initial stage 1 bootloader will use this header in case the
NAND flash doesn't support commands to retrieve sector size, etc.
However this header is bad for different boot media, like MMC or SPI.
In case SD_BOOT or SPI_BOOT is used, remove the config for this.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
5 years agoconfigs: sama5d27_som1_ek: Activate misc init for uSD variant
Alexander Dahl [Wed, 6 Feb 2019 14:19:41 +0000 (15:19 +0100)]
configs: sama5d27_som1_ek: Activate misc init for uSD variant

This was already set for 'sama5d27_som1_ek_mmc_defconfig' (first SD
card, full size). Without this option set, the MAC address is not read
from the I²C EEPROM at boot, and remains unset:

    U-Boot 2019.01 (Jan 01 2019 - 00:00:00 +0000)

    CPU: SAMA5D27 1G bits DDR2 SDRAM
    Crystal frequency:       24 MHz
    CPU clock        :      492 MHz
    Master clock     :      164 MHz
    DRAM:  128 MiB
    MMC:   sdio-host@a0000000: 0, sdio-host@b0000000: 1
    Loading Environment from FAT... OK
    In:    serial
    Out:   serial
    Err:   serial
    Net:
    Error: ethernet@f8008000 address not set.
    eth-1: ethernet@f8008000
    Hit any key to stop autoboot:  0

Signed-off-by: Alexander Dahl <ada@thorsis.com>
5 years agopinctrl: renesas: r8a77990: Reivse USB ID pin name
Hiroyuki Yokoyama [Wed, 13 Feb 2019 05:23:46 +0000 (14:23 +0900)]
pinctrl: renesas: r8a77990: Reivse USB ID pin name

Since the datasheet Rev.1.00 has an error about the USB ID pin name,
this patch revises it.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: r8a77990: Fix MOD_SEL0 bit3 when using TX0
Hiroyuki Yokoyama [Wed, 13 Feb 2019 03:41:04 +0000 (12:41 +0900)]
pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit3 when using TX0

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.50,
the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is selected,
and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is
selected.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_N
Hiroyuki Yokoyama [Wed, 13 Feb 2019 03:35:53 +0000 (12:35 +0900)]
pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_N

According to the R-Car Gen3 Hardware Manual Rev.1.50, the MOD_SEL0
bit16 is set to 0 when NFALE_A and NFRB_N_A pin functions are
selected.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: r8a77990: Fix MOD_SEL0 bit2 when using RX2,TX2 and SCK2
Hiroyuki Yokoyama [Wed, 13 Feb 2019 03:18:28 +0000 (12:18 +0900)]
pinctrl: renesas: r8a77990: Fix MOD_SEL0 bit2 when using RX2,TX2 and SCK2

According to the R-Car Gen3 Hardware Manual Rev 1.50, the MOD_SEL0
bit2 is set when RX2_{A,B}, TX2_{A,B} and SCK2_A pin functions are
selected.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: r8a77990: Fix rename RTSx_N_TANS_x to RTSx_N_x
Hiroyuki Yokoyama [Wed, 13 Feb 2019 01:37:48 +0000 (10:37 +0900)]
pinctrl: renesas: r8a77990: Fix rename RTSx_N_TANS_x to RTSx_N_x

This patch fixes the allocation name "RTSx_N_TANS_x" of IPSR /
 MOD_SEL0/1 of r8a77990 to "RTSx_N_x". This information was
confirmed in the R-Car Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: Fix r8a779{6,65} rename sel_ndfc to sel_ndf
Hiroyuki Yokoyama [Wed, 13 Feb 2019 01:22:26 +0000 (10:22 +0900)]
pinctrl: renesas: Fix r8a779{6,65} rename sel_ndfc to sel_ndf

This patch fixes the allocation name "sel_ndfc" of MOD_SEL2[22]
of r8a7796 / r8a77965 to "sel_ndf". This information was confirmed
in the R-Car Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: Remove r8a779{5,6,65} CC5_OSCOUT of IP17
Hiroyuki Yokoyama [Wed, 13 Feb 2019 01:06:22 +0000 (10:06 +0900)]
pinctrl: renesas: Remove r8a779{5,6,65} CC5_OSCOUT of IP17

This patch removes CC5_OSCOUT assignment of IP17[3:0] of r8a7795
 / r8a7796 / r8a77965. This information was confirmed in the R-Car
Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: Fix r8a779{5,6,65} rename sel_adg_ to sel_adg
Hiroyuki Yokoyama [Tue, 12 Feb 2019 11:50:01 +0000 (20:50 +0900)]
pinctrl: renesas: Fix r8a779{5,6,65} rename sel_adg_ to sel_adg

This patch fixes to the correct names, and "_" is not include after
"adg" for r8a7795/r8a7796/r8a77965. This information was confirmed
in the R-Car Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agopinctrl: renesas: Fix r8a779{5,6,65} assign to GP7_03/02 of GPSR7
Hiroyuki Yokoyama [Tue, 12 Feb 2019 10:09:13 +0000 (19:09 +0900)]
pinctrl: renesas: Fix r8a779{5,6,65} assign to GP7_03/02 of GPSR7

This patch is change the bit assignment of "HDMI1_CEC" to "GP7_03",
and "HDMI0_CEC" to "GP7_02". This information was confirmed in the
R-Car Gen3 Hardware Manual Rev.1.50.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 years agoboard: Enable DHCP distro boot for LS1012a, LS1021a
Yunfeng Ding [Tue, 19 Feb 2019 06:44:04 +0000 (14:44 +0800)]
board: Enable DHCP distro boot for LS1012a, LS1021a

Enable DHCP distro boot for Layerscape LS1012A and LS1021A.

Signed-off-by: Yunfeng Ding <yunfeng.ding@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoarmv8: fsl-layerscape: avoid DT fixup warning
Laurentiu Tudor [Tue, 26 Feb 2019 11:18:34 +0000 (13:18 +0200)]
armv8: fsl-layerscape: avoid DT fixup warning

sec_firmware reserves JR3 for it's own usage and deletes the JR3 node
from the device tree. This causes this warning to be issued when doing
the device tree fixup:

WARNING could not find node fsl,sec-v4.0-job-ring: FDT_ERR_NOTFOUND.

Fix it by excluding the device tree fixup for the JR reserved by
sec_firmware.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoarmv8: fsl-layerscape: fix SEC QI ICID setup
Laurentiu Tudor [Tue, 26 Feb 2019 11:18:33 +0000 (13:18 +0200)]
armv8: fsl-layerscape: fix SEC QI ICID setup

The SEC QI ICID setup in the QIIC_LS register is actually an offset
that is being added to the ICID coming from the qman portal. Setting
it with a non-zero value breaks SMMU setup as the resulting ICID is
not known. On top of that, the SEC QI ICID must match the qman portal
ICIDs in order to share the isolation context.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agofsl_sec: fix register layout on Layerscape architectures
Laurentiu Tudor [Tue, 26 Feb 2019 11:18:32 +0000 (13:18 +0200)]
fsl_sec: fix register layout on Layerscape architectures

On Layerscape architectures the SEC memory map is 1MB and the
register blocks contained in it are 64KB aligned, not 4KB as
the ccsr_sec structure currently assumes. Fix the layout of
the structure for these architectures.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1046qds: Enable PPA for secure boot
Prabhakar Kushwaha [Sun, 3 Mar 2019 16:27:54 +0000 (21:57 +0530)]
board: ls1046qds: Enable PPA for secure boot

Re-organize defconfig and enabled PPA for secure boot

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoconfigs: fsl: move DDR specific defines to Kconfig
Rajesh Bhagat [Fri, 1 Feb 2019 05:22:01 +0000 (05:22 +0000)]
configs: fsl: move DDR specific defines to Kconfig

Moves below DDR specific defines to Kconfig:

CONFIG_FSL_DDR_BIST
CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
CONFIG_FSL_DDR_INTERACTIVE
CONFIG_FSL_DDR_SYNC_REFRESH

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1043a: use default scan_dev_for_boot
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:41 +0000 (16:38 +0100)]
board: ls1043a: use default scan_dev_for_boot

Default environment variable is more complete. Also scans for efi
binaries for example.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1043a: enable dhcp boot
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:40 +0000 (16:38 +0100)]
board: ls1043a: enable dhcp boot

dhcp boot is a useful feature and works out-of-the-box on these
platforms. Enable it as a boot source.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1043a: enable EFI_LOADER_BOUNCE_BUFFER
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:39 +0000 (16:38 +0100)]
board: ls1043a: enable EFI_LOADER_BOUNCE_BUFFER

EFI applications need bounce buffers to work properly on these
platforms.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1046a: use default scan_dev_for_boot
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:38 +0000 (16:38 +0100)]
board: ls1046a: use default scan_dev_for_boot

Default environment variable is more complete. Also scans for efi
binaries for example.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1046a: enable dhcp boot
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:37 +0000 (16:38 +0100)]
board: ls1046a: enable dhcp boot

dhcp boot is a useful feature and works out-of-the-box on these
platforms. Enable it as a boot source.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1046a: enable EFI_LOADER_BOUNCE_BUFFER
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:36 +0000 (16:38 +0100)]
board: ls1046a: enable EFI_LOADER_BOUNCE_BUFFER

EFI applications need bounce buffers to work properly on these
platforms.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls2080ardb: use default scan_dev_for_boot
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:35 +0000 (16:38 +0100)]
board: ls2080ardb: use default scan_dev_for_boot

Default environment variable is more complete. Also scans for efi
binaries for example.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoRevert "ls2080ardb: remove dhcp function from env as boot source"
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:34 +0000 (16:38 +0100)]
Revert "ls2080ardb: remove dhcp function from env as boot source"

dhcp boot is a useful feature and works out-of-the-box for ls2088a
platforms. Moreover, no solid reason is given for disabling it.
Revert the patch to re-enable it.

This reverts commit aea5cd75e63c20de4c00ce24a93eeee8542f923e.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1088ardb: use default scan_dev_for_boot
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:33 +0000 (16:38 +0100)]
board: ls1088ardb: use default scan_dev_for_boot

Default environment variable is more complete. Also scans for efi
binaries for example.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoRevert "ls1088a: remove dhcp function from u-boot env as boot source"
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:32 +0000 (16:38 +0100)]
Revert "ls1088a: remove dhcp function from u-boot env as boot source"

dhcp boot is a useful feature and works out-of-the-box for ls1088a
platforms. Moreover, no solid reason is given for disabling it.
Revert the patch to re-enable it.

This reverts commit 863e42e8b1f9e97d87919e20e34a7b98089f7522.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1088a: fix fsl-mc search path
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:31 +0000 (16:38 +0100)]
board: ls1088a: fix fsl-mc search path

Path for fsl-mc node in kernel device-tree is /soc/fsl-mc whereas
in u-boot it is /fsl-mc.

Fix the incorrect search path to fix following error:
fdt_fixup_board_enet: ERROR: fsl-mc node not found in device tree
(error -1)

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoboard: ls1088a: fix dppa exit when using efi boot
Mian Yousaf Kaukab [Tue, 29 Jan 2019 15:38:30 +0000 (16:38 +0100)]
board: ls1088a: fix dppa exit when using efi boot

Same issue for ls2080a was fixed by following patch:
b7b8410a8f ls2080: Exit dpaa only right before exiting U-Boot

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
5 years agoMerge git://git.denx.de/u-boot-mpc85xx
Tom Rini [Sun, 3 Mar 2019 13:00:30 +0000 (08:00 -0500)]
Merge git://git.denx.de/u-boot-mpc85xx