ASoC: SOF: ipc4/intel: Add support for chained DMA

Add logic for setting up and tearing down chained DMA connections.

Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.

Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.

Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.

Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.

Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4: Add macros for chain-dma message bits

In the chained DMA mode, the firmware allocates buffers for the host
and link DMA, and takes care of copying data between host- and
link-DMA buffers in a low-latency thread. This is different to a
regular pipeline, no processing is allowed, and the connection between
host- and link DMA is handled with a dedicated IPC.

This patch exposes the macros needed to create the required IPC messages.

Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: topology: Set pipeline widget before updating IPC structures

Set up the IPC structure for scheduler widgets and set the pipeline widget
before updating the IPC structures for all widgets. This will be needed to
look up pipeline information during IPC structure set up.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Enable I2S support for RK3588/RK3588S SoCs

Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:

There are five I2S/PCM/TDM controllers and two I2S/PCM controllers embedded
in the RK3588 and RK3588S SoCs. Furthermore, RK3588 provides four additional
I2S/PCM/TDM controllers.

This patch series adds the required device tree nodes to support all the above.

Additionally, it enables analog audio support for the Rock 5B SBC, which has
been used to test both audio playback and recording.

Fix sound on ASUS Transformers

Merge series from Svyatoslav Ryhel <clamor95@gmail.com>:

- add quirk for headset detection used by some T30 devices
  (ASUS Transformers, LG Optimus 4X HD and Vu);
- add RT5631 and MAX9808x machine drivers
- update bindings

---
Changes from v1
- fm34 dropped for re-work
- quirk for headset detection and rt5631 bringup splitted
- minor adjustments in binding updates
- improvement of rt5631 rate asignment
---

David Heidelberg (1):
  dt-bindings: sound: nvidia,tegra-audio: add RT5631 CODEC

Svyatoslav Ryhel (7):
  dt-bindings: sound: nvidia,tegra-audio-common: add
    coupled-mic-hp-detect property
  ASoC: tegra: Support coupled mic-hp detection
  ARM: tegra: transformers: update sound nodes
  ASoC: tegra: Support RT5631 by machine driver
  ARM: tegra: transformers: bind RT5631 sound nodes
  dt-bindings: sound: nvidia,tegra-audio: add MAX9808x CODEC
  ASoC: tegra: Support MAX9808x by machine driver

 .../sound/nvidia,tegra-audio-common.yaml      |   4 +
 .../sound/nvidia,tegra-audio-max9808x.yaml    |  90 +++++++++++++
 .../sound/nvidia,tegra-audio-rt5631.yaml      |  85 ++++++++++++
 arch/arm/boot/dts/tegra20-asus-tf101.dts      |   7 +-
 arch/arm/boot/dts/tegra30-asus-tf201.dts      |  17 +++
 arch/arm/boot/dts/tegra30-asus-tf300t.dts     |   5 +-
 arch/arm/boot/dts/tegra30-asus-tf300tg.dts    |  17 +++
 arch/arm/boot/dts/tegra30-asus-tf700t.dts     |  17 +++
 .../dts/tegra30-asus-transformer-common.dtsi  |   9 +-
 sound/soc/tegra/Kconfig                       |  18 +++
 sound/soc/tegra/tegra_asoc_machine.c          | 125 +++++++++++++++++-
 11 files changed, 380 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml

--
2.37.2

ASoC: fsl: Specify driver name in ASoC card

Set the snd_soc_card driver name which fixes the warning:
fsl-asoc-card sound: ASoC: driver name too long 'imx-audio-tlv320aic32x4'
-> 'imx-audio-tlv32'

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230316123611.3495597-2-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: define a common DRIVER_NAME

Instead of copying the driver name manually, use a common define.
No functional change.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230316123611.3495597-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: Drop unneeded quotes

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230317233612.3967849-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: i2s: Add compatible for RK3588

The Rockchip I2S driver supports the RK3588/RK3588S SoCs, hence add the
corresponding compatible string.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230315114806.3819515-9-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rockchip: Add compatible for RK3588

Add new compatible string for the Rockchip I2S/PCM controller found on
RK3588 and RK3588S SoCs.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230315114806.3819515-8-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rockchip: i2s-tdm: Document power-domains

The binding document is missing the power-domains property. Add it.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230315114806.3819515-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rockchip: i2s-tdm: Document audio graph port

Document the 'port' property to allow the Rockchip I2S TDM controller to
be used in conjunction with the audio-graph-card.

The property will be used to provide an endpoint for binding to the
other side of the audio link.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230315114806.3819515-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rockchip: Document audio graph port

The Rockchip I2S controller is currently used in conjunction with
audio-graph-card to provide an endpoint for binding with the other side
of the audio link.

This is achieved via the 'port' property, which is not allowed:

  rk3399-rockpro64.dtb: i2s@ff890000: Unevaluated properties are not allowed ('port' was unexpected)

Fix the issue by documenting the missing property.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230315114806.3819515-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: everest,es8316: Document audio graph port

The ES8316 codec is currently used in conjunction with audio-graph-card
to provide an endpoint for binding with the other side of the audio
link.

This is achieved via the 'port' property, which is not allowed:

  rk3399-rockpro64.dtb: codec@11: Unevaluated properties are not allowed ('port' was unexpected)

Fix the issue by documenting the missing property.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230315114806.3819515-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nvidia,tegra-audio: add MAX9808x CODEC

Add dt-binding for MAX9808x CODEC.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20230308073502.5421-8-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nvidia,tegra-audio: add RT5631 CODEC

Add dt-binding for RT5631 CODEC.

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20230308073502.5421-5-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: nvidia,tegra-audio-common: add coupled-mic-hp-detect property

Add nvidia,coupled-mic-hp-det property to use Mic detect GPIO only
if HP GPIO is in active state.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20230308073502.5421-2-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: Support MAX9808x by machine driver

Add Maxim MAX9808x codec support to the Tegra ASoC machine driver.
This codec is found on LG T30 devices like Optimus 4X HD and
Optimus Vu.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20230308073502.5421-9-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: Support RT5631 by machine driver

Add Realtek ALC5631/RT5631 codec support to the Tegra ASoC machine driver.
The RT5631 codec is found on devices like ASUS Transformer TF201, TF700T
and other Tegra-based Android tablets.

Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20230308073502.5421-6-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: Support coupled mic-hp detection

This quirk is used for cases when there is GPIO which detects
any type of 3.5 Jack insertion and actual type of jack is defined
by other GPIO. 3.5 Jack GPIO generates interrupt and MIC GPIO
indicates type of Jack only if 3.5 Jack GPIO is active.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20230308073502.5421-3-clamor95@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Add support for effect

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The following series will add support for IPC4 process modules as effect
widgets.  We can cover wide range of modules as a generic process or
effect module, the patches will lay down the fundation and the generic
code to handle them.

At initialization time process modules can receive additional
information on top of the base_cfg, which is defined as base_cfg_ext, an
extension for the base configuration struct.  Other parameters or blobs
for these modules are sent as a separate message via
LARGE_CONFIG message, which is handled by the existing bytes control support.

ASoC: SOF: ipc4: upport multiple configs for BE DAIs

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

Backend DAIs may support multiple audio formats. Modify pipeline setup to select
a suitable configuration based on topology and frontend DAI runtime configuration.

The prime use case is BT offload support where we need the abality to select
different configuration on the BE side.

ASoC: dt-bindings: renesas: rsnd: correct comments syntax

yamllint expect space after '#' comment mark:

  renesas,rsnd.yaml:282:4: [error] missing starting space in comment (comments)

Fixes: 7f8b5b24bbb4 ("ASoC: dt-bindings: renesas,rsnd.yaml: add R-Car Gen4 support")
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Link: https://lore.kernel.org/all/b2810924-169d-0bad-8f20-6ec2e683d170@gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230317082137.12629-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: adi,adau17x1: fix indentation and example

Fix errors in binding indentation and example:

  adi,adau17x1.yaml:8:2: [warning] wrong indentation: expected 2 but found 1 (indentation)
  adi,adau17x1.example.dts:29.3-30.1 syntax error

Fixes: 87771c940258 ("ASoC: dt-bindings: adi,adau17x1: Convert to DT schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230317092900.16770-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Initialize in_format to NULL in sof_ipc4_get_audio_fmt

If the available_fmt->num_input_formats is 0 and there is a failure during
the output format parsing then a kfree() would be called on the
uninitialized in_format pointer.

By initializing the in_format to NULL, this error can be avoided.

Fixes: 7ab6b1e8302c ("ASoC: SOF: ipc4-topology: Modify the type of available input/output formats")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230317063524.8280-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: update pipeline_params in process prepare

Some modules may modify the audio format during processing. So, update the
pipeline params based on pin 0's output format during process prepare.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: set copier output format for process module

The copier output pin 0 format is set with module instance
initialization, format for additional copier output pin
should be set before the pin is used.

If a process module is connected to additional copier output
pin, the copier output pin format should be set according to
the corresponding input pin format of the process module.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Add support for base config extension

Some processing modules need the audio formats for all their input and
output pins appended to the base config during module init. So add support
for building the base config extension using the available pin formats
from topology.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: add base module config extension structure

The modules currently supported by the SOF firmware use the base module
config containing the audio format for the input/output pin 0 for
initialization. But some processing modules with multiple input/output
pins require the audio formats to be sent with the init instance IPC
payload. Modules that require the base config extension will need to
indicate this in the module information in the firmware manifest.

Introduce a new struct sof_ipc4_base_module_cfg_ext which contains the
pin formats for the input and output pins. This will be appended to the
init instance IPC payload for modules that require it.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: add effect widget support

Add the general support of IPC4 effect widgets.

IPC4 effect widgets, known as process modules,  can be EQFIR,
EQIIR, KEYWORD_DETECT, KPB, CHAN_SELECTOR, SMART_AMP and etc.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Move the kcontrol module_id update to helper

Introduce a helper function to update the message template for a kcontrol
associated with a widget.

In this way the helper can be re-used by other components later.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230316151137.7598-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: use common helper function in copier prepare

Use the ipc4_set_fmt_mask() helper function instead of open-coding
the logic in multiple places.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316141458.13940-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-pcm: support multiple configs for BE DAIs

Backend DAIs may support multiple audio formats. Modify pipeline
setup to select a suitable configuration based on topology and
frontend DAI runtime configuration.

For sampling rate, if one of the BE DAI configurations has
a sampling rate matching that of FE DAI, configure BE DAI to
this rate.

For sample format, the current code hardcodes DAI copier sample format
to 32bit for both playback and capture pipelines. This is not always
desired, so lift the limitation and set the sample format based on
topology definitions for the copiers. For capture pipelines, we want to
set the BE DAI pipeline format based on topology instead of using the FE
DAI format. This covers the common use-case where BE DAI outputs data at
a higher sample precision and sample width is reduced later in the
pipeline. Instead of hardcoding to 32bit, use the BE DAI copier output
format defined in topology.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230316141458.13940-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: maxim,max9759: Convert to DT schema.

Convert Maxim MAX9759 Speaker Amplifier bindings to DT schema.
Add missing gpio header file into examples section

Signed-off-by: Otabek Nazrullaev <otabeknazrullaev1998@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230315173404.7215-1-otabeknazrullaev1998@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: adi,adau17x1: Convert to DT schema

Convert the binding document for adi,adau17x1 from txt to yaml
so one could validate dt-entries correctly and any future additions
can go into yaml format. Add address and size cells to example to
prevent errors regarding reg format.

Signed-off-by: Vijaya Anand <sunrockers8@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230315231055.3067-1-sunrockers8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: renesas: rsnd: Update example

Miscellaneous updates to make the example match reality:
  - Correct SSI resource region size,
  - Complete half-conversion to new-style CPG/MSSR bindings,
  - Add missing power-domains, resets, and reset-names properties,
  - Use interrupt binding definitions instead of hardcoded numbers,
  - Correct interrupt flags,
  - Drop double blank line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/ba4ec999dc152ea1f113253e497c093b8789d414.1678790879.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mt8192: Address spammy log messages

Merge series from "Nícolas F. R. A. Prado" <nfraprado@collabora.com>:

A couple commits to make the mt8192 sound driver not spam the console.

soc: fsl: cpm1: qmc: Fix test dependency

The QMC depends on (SOC_FSL && COMPILE_TEST). SOC_FSL does not exist.

Fix the dependency using the correct one: FSL_SOC.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230314082157.137176-1-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm.c: remove indirect runtime copy

substream->runtime will be attached when substream was opened
at snd_pcm_attach_substream(). When it uses DPCM,
FE substream->runtime is attached, but BE substream->runtime is not.
Thus, we are copying FE substream->runtime to BE.

But, we are copyig FE substream->runtime to FE dpcm->runtime first (A),
and copy it to BE dpcm->runtime (B), and copy it to
BE substream->runtime (C).

static int dpcm_fe_dai_open(...) {
...
(A) fe->dpcm[stream].runtime = fe_substream->runtime;
...
}

static int dpcm_be_connect(...) {
...
(B) be->dpcm[stream].runtime = fe->dpcm[stream].runtime;
...
}

int dpcm_be_dai_startup(...) {
...
(C) be_substream->runtime = be->dpcm[stream].runtime;
...
}

It is too roundabout and troublesome.
OTOH, it is directly copying fe_substream->runtime at dpcm_be_reparent()
without using be->dpcm[stream].runtime.

static void dpcm_be_reparent(...)
{
...
for_each_dpcm_fe(be, stream, dpcm) {
...
=> be_substream->runtime = fe_substream->runtime;
break;
}
}

This patch removes indirect copying.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8je64dh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai.c: add missing flag check at snd_soc_pcm_dai_probe()

dai->probed is used at snd_soc_pcm_dai_probe/remove(),
and used to call real remove() function only when it was probed.

int snd_soc_pcm_dai_probe(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...

if (dai->driver->probe) {
(A) int ret = dai->driver->probe(dai);

if (ret < 0)
return soc_dai_ret(dai, ret);
}

=> dai->probed = 1;
}
...
}

int snd_soc_pcm_dai_remove(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
=> if (dai->probed &&
    ...) {
...
}

=> dai->probed = 0;
}
...
}

But on probe() case, we need to check dai->probed before calling
real probe() function at (A), otherwise real probe() might be called
multi times (but real remove() will be called only once).
This patch checks it at probe().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn3u64e6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4: Add support for formats per pins

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The modules in IPC4 can have multiple 'pins' on their input and output
and these pins can receive or output audio in different formats.
Currently we assume that all pins are using the same format which is a
limitation that needs to be lifted in order to support more complex
components.

This series will extend and rework the format handling to allow
different formats on pins.

ASoC: SOF: ipc4: Add support for bytes control

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

This series will add support for bytes control and topology types.
With IPC4 only the binary payload is sent to the firmware via LARGE_CONFIG
message (which does similar multi-part message handling as the IPC3 control
message did).

The bytes payload itself is not checked by the kernel but user space expected to
wrap it in sof_abi_hdr struct in order to get the target information of the
binary data.

The SOF firmware and sof-ctl have been updated to support blobs used in IPC4
setups.

ASoC: mt8192: Move spammy messages to debug level

There are many log messages throughout the mt8192 sound drivers that
print to the info level and are triggered very frequently. Move these
messages to the debug level to avoid spamming the console.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230313212908.2282961-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mt8192: Remove function name log messages

There are some log messages in the mt8192 sound code that print the
function name, presumably to aid in tracing. However this can also be
achieved by ftrace and without spamming the console, so remove these
messages.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/167874298172.26.17917791030607314817@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: sof_rt5682: Enable Bluetooth offload on adl_rt1019_rt5682

Enable Bluetooth audio offload for drv_name "adl_rt1019_rt5682" with
following board configuration specifically:

SSP0 - rt5682 Headset
SSP1 - alc1019p speaker amp
SSP2 - Bluetooth audio

Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230310184201.1302232-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: fix coverity problems

Merge series from Trevor Wu <trevor.wu@mediatek.com>:

Coverity reports some UNINIT and CERT STR31-C problems, so we add
initialization and dai id check to resolve problems.

ASoC: codecs: zl38060: Mark OF related data as maybe unused

The driver can be compile tested with !CONFIG_OF making certain data
unused:

  sound/soc/codecs/zl38060.c:611:34: error: ‘zl38_dt_ids’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: src4xxx-i2c: Mark OF related data as maybe unused

The driver can be compile tested with !CONFIG_OF making certain data
unused:

  sound/soc/codecs/src4xxx-i2c.c:27:34: error: ‘src4xxx_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: rt1019: Mark OF related data as maybe unused

The driver can be compile tested with !CONFIG_OF making certain data
unused:

  sound/soc/codecs/rt1019.c:549:34: error: ‘rt1019_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: pcm179x-spi: Mark OF related data as maybe unused

The driver can be compile tested with !CONFIG_OF making certain data
unused:

  sound/soc/codecs/pcm179x-spi.c:32:34: error: ‘pcm179x_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: adau1977-spi: Mark OF related data as maybe unused

The driver can be compile tested with !CONFIG_OF making certain data
unused:

  sound/soc/codecs/adau1977-spi.c:58:34: error: ‘adau1977_spi_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230310214333.274903-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SMA1303: set sma_i2c_regmap storage-class-specifier to static

smatch reports
sound/soc/codecs/sma1303.c:1594:28:
  warning: symbol 'sma_i2c_regmap' was not declared. Should it be static?

sma_i2c_regmap is only used in sma1303, so it should be static

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230309140959.2616497-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: sof-audio: add support for setting up loopback routes

During route setup, playback stream routes are setup by going through
sink path, capture stream routes are set up by going through source path.
This is not sufficient to handle loopback cases between pipelines
configured with different directions, e.g. a sidetone or an amplifier
feedback connected to a speaker protection module. So, add the logic to
handle such routes between widgets that aren't in the list of DAPM widgets
associated with the same PCM.

Link: https://github.com/thesofproject/linux/issues/4042
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313101302.20950-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt6359: fix UNINIT problem

Coverity shows decaring variable reg without initializer. When
regmap_read returns an error, reg keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to reg.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230307040938.7484-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt6358: fix UNINIT problem

Coverity shows decaring variable reg without initializer. When
regmap_read returns an error, reg keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to reg.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230307040938.7484-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt9195-mt6359: fix UNINIT problem

Coverity shows using uninitialized value monitor. When regmap_read
returns an error, monitor keeps the value left from earlier
computation. To prevent from the unexpected result in the case, assign
0 to monitor.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230307040938.7484-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8195: add dai id check before accessing array

Coverity shows "afe_priv->dai_priv[dai_id] evaluates to an address that
could be at negative offset of an array.". Add dai id check before
accessing the array element. This ensures that the offset of an array must
be a valid index.

Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230307040938.7484-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Search only pin 0 formats

Base config only contains the input/output audio formats for pin 0. So
match only the pin 0 formats during runtime format selection.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count

In preparation for handling processing modules with different
input/output pin counts, introduce two new tokens for input/output
audio format counts. Use these token values to parse all the available
audio formats from topology.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Remove the ref_audio_fmt field

Remove the field in struct sof_ipc4_available_audio_format and pass the
format list to be searched as an argument to sof_ipc4_init_audio_fmt()
directly.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Modify the signature of sof_ipc4_init_audio_fmt()

Only the copier needs to set the output format in its IPC payload. So
move the code to set the output format inside
sof_ipc4_prepare_copier_module() and modify the signature of
sof_ipc4_init_audio_fmt() to remove the out_format argument.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Modify the type of available input/output formats

Introduce a new struct sof_ipc4_pin_format which contains the pin index
and the buffer size. Replace the type of available input/output audio
formats in struct sof_ipc4_available_audio_format with this new struct
type and rename them to input_pin_fmts and output_pin_fmts.

Also, add a new token, SOF_TKN_CAVS_AUDIO_FORMAT_PIN_INDEX that will be
used to parse the pin index for the audio format from topology.
Currently we only set the audio format for Pin 0 in topology, so the
default value will be 0 for all audio formats.

Finally, parse the pin_index and the input/output buffer sizes
along with audio formats into the pin_format arrays in struct
sof_ipc4_available_audio_format. This makes the base_config array in struct
sof_ipc4_available_audio_format redundant. So remove it. This change
will allow the addition of audio formats for the non-zero pins in
topology transparent to the topology parser in the kernel.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Always parse the output formats in topology

Parse the output formats available in topology always. Whether the
output format is sent in the init instance payload or not is decided
when sof_ipc4_init_audio_fmt() is invoked.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Parse the SOF_COMP_TOKENS only once

There is no need to parse the cpc and is_pages values multiple times.
It is enough to parse the 2 tokens directly into the base_config field
in each module's init_instance IPC payload.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token

Do not parse the SOF_TKN_CAVS_AUDIO_FORMAT_DMA_BUFFER_SIZE token as the
dma_buffer_size can be derived from the input/output buffer size and the
type of widget during copier prepare. For the deep buffer case,
introduce a new token that will be used to get the deep buffer DMA size
for the host copier from topology.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Add a new field in struct sof_ipc4_available_audio_format

Add a new field, input_audio_fmts, in struct
sof_ipc4_available_audio_format and parse all the available input audio
formats into this new field and not into the base_config field. This is
preparation to remove the base_config array from the struct
sof_ipc4_available_audio_format.

This simplifies the sof_ipc4_init_audio_fmt()
function as the reference audio format for matching with input params
has the same size.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Use input/output pin consistently

Currently we use input/output and sink/source pins interchangeably.
Remove the references to sink/source pins and replace with input/output
pins everywhere for consistency and clarity.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: rename a couple of tokens

Rename SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID and
SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID as
SOF_TKN_CAVS_AUDIO_FORMAT_IN_VALID_BIT_DEPTH and
SOF_TKN_CAVS_AUDIO_FORMAT_OUT_VALID_BIT_DEPTH respectively.

These are currently not used.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313124856.8140-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Merge up fixes as a dependency for future SOF work

New SOF changes require the current set of fixes.

ASoC: SOF: ipc4-control: Add support for bytes control get and put

Add support for bytes control by implementing bytes_get/put and
bytes_ext_get/put and blobs with either module init instance or
large config type.

For module init instance type the put will only update the stored
configuration blob and it is going to be taken into use next time the
module is (re-)initialized.

Large config type of blobs are sent to the firmware whenever the DSP is
powered up.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Add support for TPLG_CTL_BYTES

Add byte type support for IPC4. The bytes controls are used to transfer
configuration blobs to/from firmware via large_config messages.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-control: set_volume_data only applies to VOLSW family

Make sure sof_ipc4_set_volume_data() is only called for the
SND_SOC_TPLG_CTL_VOLSW, SND_SOC_TPLG_CTL_VOLSW_SX and
SND_SOC_TPLG_CTL_VOLSW_XR_SX info_type.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: uapi: header: Update sof_abi_hdr doc for IPC4 use

With IPC4 the sof_abit_hdr is only used between user space
(and in topology) and kernel.
The same abi header is used with small differencies like different
magic number and the type field have slightly different name, but
similar function in IPC4 (param_id).

Update the kernel documentation to highlight the differences.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: uapi: header: Convert sof_abi_hdr comments to kernel style

Replace the comments for sof_abi_hdr to kernel style.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc3-control: Merge functions to handle bytes_ext get variants

The code for bytes_ext_get and bytes_ext_volatile_get is identical with
the only difference is that in case of volatile_get we refresh the data
from the DSP before returning it to user space.

Convert the callbacks to a simple wrapper for the same function.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc3-control: Rename snd_sof_refresh_control()

Rename the snd_sof_refresh_control() to sof_ipc3_refresh_control() to
follow the function naming convention for IPC specific code.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230313110344.16644-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'v6.3-rc2' into asoc-6.4 to fix clock related boot issues

Linux 6.3-rc2

Linux 6.3-rc2

wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"

This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after
free for wext")

This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'tpm-v6.3-rc3' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Two additional bug fixes for v6.3"

* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: disable hwrng for fTPM on some AMD designs
  tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm: disable hwrng for fTPM on some AMD designs

AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS.  This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.

This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.

So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions.  As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.

It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.

Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it.  If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.

Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'xfs-6.3-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

 - Fix a crash if mount time quotacheck fails when there are inodes
   queued for garbage collection.

 - Fix an off by one error when discarding folios after writeback
   failure.

* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix off-by-one-block in xfs_discard_folio()
  xfs: quotacheck failure can race with background inode inactivation

Merge tag 'staging-6.3-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes and removal from Greg KH:
 "Here are four small staging driver fixes, and one big staging driver
  deletion for 6.3-rc2.

  The fixes are:

   - rtl8192e driver fixes for where the driver was attempting to
     execute various programs directly from the disk for unknown reasons

   - rtl8723bs driver fixes for issues found by Hans in testing

  The deleted driver is the removal of the r8188eu wireless driver as
  now in 6.3-rc1 we have a "real" wifi driver for one that includes
  support for many many more devices than this old driver did. So it's
  time to remove it as it is no longer needed. The maintainers of this
  driver all have acked its removal. Many thanks to them over the years
  for working to clean it up and keep it working while the real driver
  was being developed.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: delete driver
  staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
  staging: rtl8723bs: Fix key-store index handling
  staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
  staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script

Merge tag 'x86_urgent_for_v6.3_rc2' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:
 "A single erratum fix for AMD machines:

   - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
     impact to anything as those machines will fallback to XSAVEC which
     is equivalent there"

* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Disable XSAVES on AMD family 0x17

Merge tag 'kernel.fork.v6.3-rc2' of gitolite.pub/scm/linux/kernel/git/brauner/linux

Pull clone3 fix from Christian Brauner:
 "A simple fix for the clone3() system call.

  The CLONE_NEWTIME allows the creation of time namespaces. The flag
  reuses a bit from the CSIGNAL bits that are used in the legacy clone()
  system call to set the signal that gets sent to the parent after the
  child exits.

  The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
  dedicated .exit_signal field in struct clone_args. So we blocked all
  CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
  and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
  causing CLONE_NEWTIME with clone3() to be rejected. Fix this"

* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  selftests/clone3: test clone3 with CLONE_NEWTIME
  fork: allow CLONE_NEWTIME in clone3 flags

Merge tag 'vfs.misc.v6.3-rc2' of git://git./linux/kernel/git/vfs/idmapping

Pull vfs fixes from Christian Brauner:

 - When allocating pages for a watch queue failed, we didn't return an
   error causing userspace to proceed even though all subsequent
   notifcations would be lost. Make sure to return an error.

 - Fix a misformed tree entry for the idmapping maintainers entry.

 - When setting file leases from an idmapped mount via
   generic_setlease() we need to take the idmapping into account
   otherwise taking a lease would fail from an idmapped mount.

 - Remove two redundant assignments, one in splice code and the other in
   locks code, that static checkers complained about.

* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  filelocks: use mount idmapping for setlease permission check
  fs/locks: Remove redundant assignment to cmd
  splice: Remove redundant assignment to ret
  MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
  watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Bug fixes and regressions for ext4, the most serious of which is a
  potential deadlock during directory renames that was introduced during
  the merge window discovered by a combination of syzbot and lockdep"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: zero i_disksize when initializing the bootloader inode
  ext4: make sure fs error flag setted before clear journal error
  ext4: commit super block if fs record error when journal record without error
  ext4, jbd2: add an optimized bmap for the journal inode
  ext4: fix WARNING in ext4_update_inline_data
  ext4: move where set the MAY_INLINE_DATA flag is set
  ext4: Fix deadlock during directory rename
  ext4: Fix comment about the 64BIT feature
  docs: ext4: modify the group desc size to 64
  ext4: fix another off-by-one fsmap error on 1k block filesystems
  ext4: fix RENAME_WHITEOUT handling for inline directories
  ext4: make kobj_type structures constant
  ext4: fix cgroup writeback accounting with fs-layer encryption

cpumask: relax sanity checking constraints

The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().

We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range".  But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.

[ This "previous-1" behavior is also the reason we have all those
  comments about /* -1 is a legal arg here. */ and separate checks for
  that being ok.  So we could have just made "small_cpumask_bits-1"
  be a similar special "don't check this" value.

  Tetsuo Handa even suggested a patch that only does that for
  cpumask_next(), since that seems to be the only actual case that
  triggers, but that all makes it even _more_ magical and special. So
  just relax the check ]

One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.

Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'i2c-for-6.3-rc2' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "This marks the end of a transition to let I2C have the same probe
  semantics as other subsystems. Uwe took care that no drivers in the
  current tree nor in -next use the deprecated .probe call. So, it is a
  good time to switch to the new, standard semantics now.

  There is also a regression fix:

   - regression fix for the notifier handling of the I2C core

   - final coversions of drivers away from deprecated .probe

   - make .probe_new the standard probe and convert I2C core to use it

* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: dev: Fix bus callback return values
  i2c: Convert drivers to new .probe() callback
  i2c: mux: Convert all drivers to new .probe() callback
  i2c: Switch .probe() to not take an id parameter
  media: i2c: ov2685: convert to i2c's .probe_new()
  media: i2c: ov5695: convert to i2c's .probe_new()
  w1: ds2482: Convert to i2c's .probe_new()
  serial: sc16is7xx: Convert to i2c's .probe_new()
  mtd: maps: pismo: Convert to i2c's .probe_new()
  misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()

ubi: block: Fix missing blk_mq_end_request

Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished

Fixes: 91cc8fbcc8c7 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ASoC: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546413-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Use of_property_present() for testing DT property presence

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144732.1546328-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ext4: zero i_disksize when initializing the bootloader inode

If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0.  However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:

 WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
 RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
 Call Trace:
  vfs_write+0x3b1/0x5c0
  ksys_write+0x77/0x160
  __x64_sys_write+0x22/0x30
  do_syscall_64+0x39/0x80

Reproducer:
 1. create corrupted image and mount it:
       mke2fs -t ext4 /tmp/foo.img 200
       debugfs -wR "sif <5> size 25700" /tmp/foo.img
       mount -t ext4 /tmp/foo.img /mnt
       cd /mnt
       echo 123 > file
 2. Run the reproducer program:
       posix_memalign(&buf, 1024, 1024)
       fd = open("file", O_RDWR | O_DIRECT);
       ioctl(fd, EXT4_IOC_SWAP_BOOT);
       write(fd, buf, 1024);

Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: make sure fs error flag setted before clear journal error

Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com

ext4: commit super block if fs record error when journal record without error

Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com

ext4, jbd2: add an optimized bmap for the journal inode

The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode.  So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.

Reported-by: syzbot+9543479984ae9e576000@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=e4aaa78795e490421c79f76ec3679006c8ff4cf0
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix WARNING in ext4_update_inline_data

Syzbot found the following issue:
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
Modules linked in:
CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246
RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000
RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248
RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220
R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40
R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c
FS:  0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __alloc_pages_node include/linux/gfp.h:237 [inline]
 alloc_pages_node include/linux/gfp.h:260 [inline]
 __kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113
 __do_kmalloc_node mm/slab_common.c:956 [inline]
 __kmalloc+0xfe/0x190 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 kzalloc include/linux/slab.h:720 [inline]
 ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346
 ext4_update_inline_dir fs/ext4/inline.c:1115 [inline]
 ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307
 ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385
 ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772
 ext4_create+0x36c/0x560 fs/ext4/namei.c:2817
 lookup_open fs/namei.c:3413 [inline]
 open_last_lookups fs/namei.c:3481 [inline]
 path_openat+0x12ac/0x2dd0 fs/namei.c:3711
 do_filp_open+0x264/0x4f0 fs/namei.c:3741
 do_sys_openat2+0x124/0x4e0 fs/open.c:1310
 do_sys_open fs/open.c:1326 [inline]
 __do_sys_openat fs/open.c:1342 [inline]
 __se_sys_openat fs/open.c:1337 [inline]
 __x64_sys_openat+0x243/0x290 fs/open.c:1337
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Above issue happens as follows:
ext4_iget
   ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
   __ext4_mark_inode_dirty
      ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
         ext4_xattr_shift_entries
 ->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
  ext4_update_inline_dir
    get_max_inline_xattr_value_size
      if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
        free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
   ext4_update_inline_data
      value = kzalloc(len, GFP_NOFS);
      -> len is unsigned int, maybe very large, then trigger warning when
         'kzalloc()'

To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'.  We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed.  Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().

Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: move where set the MAY_INLINE_DATA flag is set

The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode().  In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Twenty fixes all in drivers except the one zone storage revalidation
  fix to sd.

  The megaraid_sas fixes are more on the level of a driver update
  (enabling crash dump and increasing lun number) but I thought you
  could let this slide on -rc1 and the next most extensive update is a
  load of fixes to mpi3mr"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Fix wrong zone_write_granularity value during revalidate
  scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
  scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
  scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
  scsi: megaraid_sas: Update max supported LD IDs to 240
  scsi: mpi3mr: Bad drive in topology results kernel crash
  scsi: mpi3mr: NVMe command size greater than 8K fails
  scsi: mpi3mr: Return proper values for failures in firmware init path
  scsi: mpi3mr: Wait for diagnostic save during controller init
  scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
  scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
  scsi: lpfc: Avoid usage of list iterator variable after loop
  scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
  scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
  scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
  scsi: ufs: ufs-qcom: Remove impossible check
  scsi: ufs: core: Add soft dependency on governor_simpleondemand
  scsi: hisi_sas: Check devm_add_action() return value
  scsi: qla2xxx: Add option to disable FC2 Target support
  scsi: target: iscsi: Fix an error message in iscsi_check_key()