Jeff Garzik [Wed, 7 Sep 2005 06:05:59 +0000 (02:05 -0400)]
[libata sata_mv] fix build
This function will go away when pci_intx() finally makes it
into the core PCI layer.
Brett Russ [Thu, 1 Sep 2005 22:26:17 +0000 (18:26 -0400)]
[PATCH] libata: Marvell SATA support (PIO mode)
This is my libata compatible low level driver for the Marvell SATA
family. Currently it successfully runs in PIO mode on a 6081 chip.
EDMA support is in the works and should be done shortly. Review,
testing (especially on other flavors of Marvell), comments welcome.
Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Brett Russ [Fri, 2 Sep 2005 01:53:34 +0000 (21:53 -0400)]
[PATCH] libata: fix pio_mask values (take 2)
ata_get_mode_mask() uses bits 3 and 4 in the pio_mask to represent PIO
modes 3 and 4. The value read from the drive, which reports support
for PIO3 and PIO4 in bits 0 and 1, is shifted left by 3 bits and OR'd
with 0x7 (which then corresponds to PIO 2-0 in libata). Thus, the
drivers below need adjustments to comply with the way pio_mask is
used. I changed the masks from the commented values to all support
PIO4-0, since the spec mandates that PIO0-2 are supported and there's
no reason not to support PIO3 IMO.
Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Linus Torvalds [Tue, 6 Sep 2005 12:16:24 +0000 (05:16 -0700)]
Merge /pub/scm/linux/kernel/git/paulus/ppc64-2.6
Linus Torvalds [Tue, 6 Sep 2005 07:47:18 +0000 (00:47 -0700)]
Merge branch 'upstream' of /linux/kernel/git/jgarzik/netdev-2.6
Linus Torvalds [Tue, 6 Sep 2005 07:45:34 +0000 (00:45 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 6 Sep 2005 07:35:51 +0000 (00:35 -0700)]
Merge /pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Tue, 6 Sep 2005 07:32:12 +0000 (00:32 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Tue, 6 Sep 2005 07:31:02 +0000 (00:31 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6
Linus Torvalds [Tue, 6 Sep 2005 07:29:52 +0000 (00:29 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6
Olaf Hering [Sun, 10 Jul 2005 19:35:15 +0000 (19:35 +0000)]
[PATCH] remove linux/version.h include from arch/ppc64
Changing CONFIG_LOCALVERSION rebuilds too much, for no apparent reason.
Use system_utsname for progress and debug header.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
David Gibson [Tue, 6 Sep 2005 04:59:47 +0000 (14:59 +1000)]
[PATCH] Invert sense of SLB class bit
Currently, we set the class bit in kernel SLB entries, and clear it on
user SLB entries. On POWER5, ERAT entries created in real mode have
the class bit clear. So to avoid flushing kernel ERAT entries on each
context switch, this patch inverts our usage of the class bit, setting
it on user SLB entries and clearing it on kernel SLB entries.
Booted on POWER5 and G5.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Al Viro [Tue, 6 Sep 2005 06:35:41 +0000 (23:35 -0700)]
[SPARC64]: Kconfig fix (GEN_RTC dependencies)
Yet another architecture not coverd by GEN_RTC - sparc64 never picked
it until now and it doesn't have asm/rtc.h to go with it, so it
wouldn't compile anyway (or have these ioctls in the user-visible
headers, for that matter).
FWIW, I'm very tempted to introduce ARCH_HAS_GEN_RTC and have it set
in arch/*/Kconfig for architectures that know what to do with this
stuff - for something supposedly generic the list of architectures
where it doesn't work is getting too long...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Tue, 6 Sep 2005 06:35:05 +0000 (23:35 -0700)]
[SUNSU]: Compile fixes.
sunsu had been broken by ->stop_tx/->start_tx API changes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2005 06:34:13 +0000 (23:34 -0700)]
[SPARC64]: Don't include drivers/firmware/Kconfig
It's really not relevant for this platform in any
way, after all.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2005 06:33:05 +0000 (23:33 -0700)]
[RTC]: Use SA_SHIRQ in sparc specific code.
Based upon a report from Jason Wever.
Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Tue, 6 Sep 2005 06:30:15 +0000 (23:30 -0700)]
[MOXA]: Fix this driver properly.
Actually, proper fix of that breakage is embarrassingly simple - it's yet
another gratitious leftover include of asm/segment.h, so incremental to the
previos would be removal of that BROKEN and removal of bogus include from
mxser.c itself.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2005 06:19:49 +0000 (23:19 -0700)]
[IEEE80211]: Use correct size_t printf format string in ieee80211_rx.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Blanchard [Tue, 6 Sep 2005 04:59:16 +0000 (14:59 +1000)]
[PATCH] ppc64: Fix build with oprofile disabled
Fix build with oprofile disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 04:57:52 +0000 (14:57 +1000)]
[PATCH] ppc64: Move oprofile_model into cpu feature struct
Move oprofile_model into cpu feature struct.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 04:55:35 +0000 (14:55 +1000)]
[PATCH] ppc64: Move oprofile_impl.h into include/asm-ppc64
Move oprofile_impl.h into include/asm-ppc64 in preparation for moving
oprofile_model into cpu feature struct.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 04:53:57 +0000 (14:53 +1000)]
[PATCH] ppc64: Add oprofile cpu_type to cpu feature struct
Add oprofile cpu_type to cpu feature struct.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 04:52:12 +0000 (14:52 +1000)]
[PATCH] ppc64: Use num_pmcs in oprofile code
Change oprofile to use num_pmcs from the cpu feature struct.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 04:50:48 +0000 (14:50 +1000)]
[PATCH] ppc64: remove CPU_FTR_PMC8
Remove the CPU_FTR_PMC8 feature now we encode the number of PMCs
directly.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 04:47:49 +0000 (14:47 +1000)]
[PATCH] ppc64: add number of PMCs to cputable
Add a field in the cputable struct to store the number of PMCs.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
David S. Miller [Tue, 6 Sep 2005 06:08:01 +0000 (23:08 -0700)]
[IPW2200]: ipw2200.h needs linux/dma-mapping.h
Signed-off-by: David S. Miller <davem@davemloft.net>
Wim Coekaerts [Tue, 6 Sep 2005 03:22:47 +0000 (20:22 -0700)]
[PATCH] ppc64: Allow world readable /proc/ppc64/lparcfg
I would like to be able to read the lparcfg data from any user so we
can make "intelligent" decisions based on underlying attributes when
running in lpars. Yes there's software that likes to do this :) and
runs as non-root.
It's very similar to say VM where you can get CP to provide feedback
of the real hardware inside a VM guest.
Signed-off-by: Wim Coekaerts <wim.coekaerts@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Kumar Gala [Wed, 24 Aug 2005 16:56:56 +0000 (11:56 -0500)]
[PATCH] ppc64: remove use of asm/segment.h
Removed PPC64 architecture specific users of asm/segment.h.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Jon Loeliger [Thu, 1 Sep 2005 20:51:52 +0000 (15:51 -0500)]
[PATCH] ppc/ppc64: Merge more include files
This patch merges several include files from
asm-ppc and asm-ppc64 into the new asm-powerpc.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Becky Bruce [Sun, 4 Sep 2005 00:01:57 +0000 (19:01 -0500)]
[PATCH] Move 3 more headers to asm-powerpc
Merged several nearly-identical header files from asm-ppc and asm-ppc64
into asm-powerpc.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 03:05:58 +0000 (13:05 +1000)]
[PATCH] ppc64: speedup cmpxchg
cmpxchg has the following code:
__typeof__(*(ptr)) _o_ = (o);
__typeof__(*(ptr)) _n_ = (n);
Unfortunately it makes gcc 4.0 store and load the variables to the stack.
Eg in atomic_dec_and_test we get:
stw r10,112(r1)
stw r9,116(r1)
lwz r9,112(r1)
lwz r0,116(r1)
x86 is just casting the values so do that instead. Also change __xchg*
and __cmpxchg* to take unsigned values, removing a few sign extensions.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Anton Blanchard [Tue, 6 Sep 2005 02:05:26 +0000 (12:05 +1000)]
[PATCH] ppc64: poison initmem
Poison initmem after we free it so we catch use after free issues.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Jimi Xenidis [Thu, 1 Sep 2005 15:57:10 +0000 (11:57 -0400)]
[PATCH] ppc64: systemcfg is now a pointer
The following patch fixes 2 issues:
1) use PLATFORM_LPAR bit to test if running in LPAR mode
2) systemcfg pointer is assigned from static data in
arch/ppc64/kernel/pacaData.c. The file arch/ppc64/kernel/head.S
now refers to is using the GOT binding to the pointer and hence
must deref it.
Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:57:27 +0000 (11:57 +1000)]
[PATCH] ppc64: Consolidate early console and PPCDBG code
Consolidate the early console and PPCDBG code in udbg.c
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:57:00 +0000 (11:57 +1000)]
[PATCH] ppc64: Remove old includes
Trim some no longer needed includes from udbg.c and friends.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:56:42 +0000 (11:56 +1000)]
[PATCH] ppc64: Take udbg out of ppc_md
Take udbg out of ppc_md. Allows us to not overwrite early udbg inits
when assigning ppc_md.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:56:02 +0000 (11:56 +1000)]
[PATCH] ppc64: Split SCC and 15550 udbg code
Split scc and 15550 functions from udbg each into their own file.
This makes them more symetric with the lpar and btext code.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:55:38 +0000 (11:55 +1000)]
[PATCH] ppc64: Make udbg_init_uart set the ppc_md udbg methods.
make udbg_init_uart set the ppc_md udbg methods.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:55:00 +0000 (11:55 +1000)]
[PATCH] ppc64: Clean up CR handling
Make the 16550 and real mode 16550 use tail recursion like the scc code
instead of repeating the routine except for the character sent.
Gcc recoginizes the tail recursion and handles it efficently without
stack allocations. The maple real putc shrinks from 188 to 104 bytes
of instructions. udbg_putc drops from 188 to 140 bytes.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:54:42 +0000 (11:54 +1000)]
[PATCH] ppc64: Remove dummy getc routines
Now that xmon is fixed we should not need the dummy getc routines.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:54:13 +0000 (11:54 +1000)]
[PATCH] ppc64: dont bypass ppc_md.udbg* functions
udbg_getc_poll is a ppc_md function. don't call directly into udbg.c
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:50:55 +0000 (11:50 +1000)]
[PATCH] ppc64: Add missing include
inline pmac_call_feature references ppc_md so include asm/machdep.h
in asm/pmac_feature.h
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Herbert Xu [Tue, 6 Sep 2005 01:55:48 +0000 (18:55 -0700)]
[TCP]: Fix TCP_OFF() bug check introduced by previous change.
The TCP_OFF assignment at the bottom of that if block can indeed set
TCP_OFF without setting TCP_PAGE. Since there is not much to be
gained from avoiding this situation, we might as well just zap the
offset. The following patch should fix it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 6 Sep 2005 01:44:37 +0000 (18:44 -0700)]
[NET]: 2.6.13 breaks libpcap (and tcpdump)
Patrick McHardy says:
Never mind, I got it, we never fall through to the second switch
statement anymore. I think we could simply break when load_pointer
returns NULL. The switch statement will fall through to the default
case and return 0 for all cases but 0 > k >= SKF_AD_OFF.
Here's a patch to do just that.
I left BPF_MSH alone because it's really a hack to calculate the IP
header length, which makes no sense when applied to the special data.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2005 01:14:11 +0000 (18:14 -0700)]
[NET]: Do not protect sysctl_optmem_max with CONFIG_SYSCTL
The ipv4 and ipv6 protocols need to access it unconditionally.
SYSCTL=n build failure reported by Russell King.
Signed-off-by: David S. Miller <davem@davemloft.net>
Harald Welte [Tue, 6 Sep 2005 01:09:08 +0000 (18:09 -0700)]
[NETFILTER] remove bogus hand-coded htonll() from nenetlink_queue
htonll() is nothing else than cpu_to_be64(), so we'd rather call the
latter.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Tue, 6 Sep 2005 01:08:11 +0000 (18:08 -0700)]
[IRDA]: IrDA prototype fixes
Every file should #include the header files containing the prototypes
of it's global functions.
In this case this showed that the prototype of irlan_print_filter()
was wrong which is also corrected in this patch.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Tue, 6 Sep 2005 01:07:42 +0000 (18:07 -0700)]
[SCTP]: net/sctp/sysctl.c should #include <net/sctp/sctp.h>
Every file should #include the header files containing the prototypes of
it's global functions.
sctp.h contains the prototypes of sctp_sysctl_{,un}register().
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Tue, 6 Sep 2005 01:06:45 +0000 (18:06 -0700)]
[NETFILTER]: net/netfilter/nfnetlink*: make functions static
This patch makes needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Tue, 6 Sep 2005 01:05:52 +0000 (18:05 -0700)]
[IPV4]: net/ipv4/ipconfig.c should #include <linux/nfs_fs.h>
Every file should #include the header files containing the prototypes of
it's global functions.
nfs_fs.h contains the prototype of root_nfs_parse_addr().
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Tue, 6 Sep 2005 01:04:28 +0000 (18:04 -0700)]
[ATM]: net/atm/ioctl.c should #include "common.h"
Every file should #include the header files containing the prototypes
of it's global functions.
common.h contains the prototype for vcc_ioctl().
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Sep 2005 00:56:11 +0000 (17:56 -0700)]
[TG3]: Update driver version and release date.
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Sep 2005 00:53:32 +0000 (17:53 -0700)]
[TG3]: Use status tag to check for new events
Use the status tag to determine if there are new events in
tg3_interrupt_tagged(). We discussed about this a while ago with Grant
Grundler and DaveM. This scheme makes it unnecessary to clear the
updated bit in the status block when using tagged mode, and only
a simple comparison is needed to determine if there are new events.
The tp->lock around netif_rx_complete() and tg3_restart_ints() is also
removed. It is unnecessary with DaveM's new locking scheme.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Sep 2005 00:53:19 +0000 (17:53 -0700)]
[TG3]: Remove status block access in tg3_msi() and add prefetches
Remove unnecessary status block accesses in tg3_msi(). Since MSI is
not shared, it is unnecessary to read the status block to determine if
there are any new events in the MSI handler. It is also unnecessary to
clear the updated bit in the status block.
Since the poll list is per-cpu, tg3_poll() will be scheduled to run on
the same CPU that received the MSI. Prefetches for the status block
and the next rx descriptors are added in tg3_msi() to improve their
access times when tg3_poll() runs.
In the non-MSI irq handlers, we need to check the status block because
interrupts may be shared. Only prefetches for the next rx descriptors
are added.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Sep 2005 00:53:06 +0000 (17:53 -0700)]
[TG3]: Add PHY loopback test
Improve ethtool loopback self test by adding PHY loopback to the
existing MAC loopback test.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Sep 2005 00:52:54 +0000 (17:52 -0700)]
[TG3]: Add ethtool -p support
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Sep 2005 00:52:38 +0000 (17:52 -0700)]
[TG3]: Minor 5780 and 5752 fixes
Minor SerDes bug fixes for 5780S and nvram bug fixes for 5780 and
5752.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
James Bottomley [Fri, 19 Aug 2005 13:14:01 +0000 (09:14 -0400)]
[PATCH] klist: fix klist to have the same klist_add semantics as list_head
at the moment, the list_head semantics are
list_add(node, head)
whereas current klist semantics are
klist_add(head, node)
This is bound to cause confusion, and since klist is the newcomer, it
should follow the list_head semantics.
I also added missing include guards to klist.h
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesper Juhl [Wed, 17 Aug 2005 20:06:34 +0000 (22:06 +0200)]
[PATCH] Driver core: small cleanup; remove check for NULL before kfree() in driver core
Remove needless checking of variable for NULL before calling kfree() on it.
Applies to 2.6.13-rc6-git9
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Shaohua Li [Thu, 11 Aug 2005 02:37:39 +0000 (10:37 +0800)]
[PATCH] Driver core: hande sysdev suspend failure
This patch adds the return value check for sysdev suspend and does
restore in failure case. Send the patch to pm-list, but seems lost, so I
resend it.
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jan Veldeman [Sun, 31 Jul 2005 11:12:10 +0000 (13:12 +0200)]
[PATCH] Driver core: Documentation: use S_IRUSR | ... in stead of 0644
Change filemode to use defines in stead of 0644,
based on suggestions by Walter Harms and Domen Puncer.
Signed-off-by: Jan Veldeman <Jan.Veldeman@advalvas.be>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jan Veldeman [Sun, 31 Jul 2005 11:12:09 +0000 (13:12 +0200)]
[PATCH] Driver core: Documentation: fix whitespace between parameters
Fix whitespace after comma between parameters.
Signed-off-by: Jan Veldeman <Jan.Veldeman@advalvas.be>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Thu, 28 Jul 2005 00:37:34 +0000 (17:37 -0700)]
[PATCH] Floppy: add cmos attribute to floppy driver tidy
Fiddle with coding style a bit.
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hannes Reinecke [Fri, 15 Jul 2005 08:09:25 +0000 (10:09 +0200)]
[PATCH] Floppy: Add cmos attribute to floppy driver
Currently only a device 'fdX' shows up in sysfs; the other possible
device for this drive (like fd0h1440 etc) must be guessed from there.
This patch corrects the floppy driver to create a platform device for
each floppy found; each platform device also has an attribute 'cmos'
which represents the cmos type for this drive. From this attribute the
other possible device types can be computed.
From: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dmitry Torokhov [Sun, 10 Jul 2005 06:21:24 +0000 (01:21 -0500)]
[PATCH] Driver core: link device and all class devices derived from it.
Driver core: link device and all class devices derived from it.
To ease the task of locating class devices derived from a certain
device create symlinks from parent device to its class devices.
Change USB host class device name from usbX to usb_hostX to avoid
conflict when creating aforementioned links.
Tweaked by Greg to have the symlink be "class_name:class_device_name" in
order to prevent duplicate links.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 18 Aug 2005 00:33:11 +0000 (17:33 -0700)]
[PATCH] Fix manual binding infinite loop
Fix for manual binding of drivers to devices. Problem is if you pass in
a valid device id, but the driver refuses to bind. Infinite loop as
write() tries to resubmit the data it just sent.
Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the
problem out.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavel Roskin [Fri, 2 Sep 2005 00:10:06 +0000 (20:10 -0400)]
[PATCH] orinoco: New driver - spectrum_cs.
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree
dee4f325520d4ea29397dd67ca657b7235bb1790 (from
c88faac230cc9775445e5c644991c352e35c72a1)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 17:46:39 2005 -0400
New driver - spectrum_cs.
Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
Symbol Wireless Networker LA4100, CompactFlash cards by Socket
Communications and Intel PRO/Wireless 2011B.
The driver implements Symbol firmware download. The rest is handled
in hermes.c and orinoco.c.
Utilities for downloading the Symbol firmware are available at
http://sourceforge.net/projects/orinoco/
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Pavel Roskin [Fri, 2 Sep 2005 00:08:56 +0000 (20:08 -0400)]
[PATCH] orinoco: New driver - orinoco_nortel.
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree
dce61aef99ceb57370b70222dc34d788666c0ac3 (from
ceb6695092be8dcdfe2dec6ee5097d613011489d)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 15:50:55 2005 -0400
New driver - orinoco_nortel.
This is a driver for Nortel emobility PCI adaptors, which consist of an
Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge. The
driver initializes the device and uses Orinoco core driver for actual
wireless networking.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Pavel Roskin [Fri, 2 Sep 2005 00:07:52 +0000 (20:07 -0400)]
[PATCH] orinoco: Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES.
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree
ceb6695092be8dcdfe2dec6ee5097d613011489d (from
6b39374a27eb4be7e9d82145ae270ba02ea90dc8)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 14:50:10 2005 -0400
Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES.
Those drivers have been used for a long time, and there have been very
few problem reports.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Pavel Roskin [Fri, 2 Sep 2005 00:06:06 +0000 (20:06 -0400)]
[PATCH] orinoco: Optimize orinoco_join_ap()
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree
cb289b9f9b2a0f3ae7070a008f22e383b37526ee (from
56bfcdb38b3d04c1f8c1fd705e411f4be53b663c)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 19:05:16 2005 -0400
Optimize orinoco_join_ap() - break from loop once the requested
BSSID
is found.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Pavel Roskin [Fri, 2 Sep 2005 00:05:19 +0000 (20:05 -0400)]
[PATCH] orinoco: Fix memory leak on error in processing hostscan frames.
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree
ca955293cdfd3139e150d3b4fed3922a7eb651fb (from
cb289b9f9b2a0f3ae7070a008f22e383b37526ee)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 19:08:00 2005 -0400
Fix memory leak on error in processing hostscan frames.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Pavel Roskin [Fri, 2 Sep 2005 00:04:20 +0000 (20:04 -0400)]
[PATCH] orinoco: Remove entry for Intel PRO/Wireless 2011B.
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree
c88faac230cc9775445e5c644991c352e35c72a1 (from
dce61aef99ceb57370b70222dc34d788666c0ac3)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 17:09:45 2005 -0400
Remove entry for Intel PRO/Wireless 2011B.
It is not supported by this driver because it has no firmware in
flash. spectrum_cs is needed for this device.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Pavel Roskin [Fri, 2 Sep 2005 00:02:50 +0000 (20:02 -0400)]
[PATCH] orinoco: Change orinoco_translate_scan() to return error code on error.
Signed-off-by: Pavel Roskin <proski@gnu.org>
diff-tree
8fc038ec51acf5f777fade80c5e38112b766aeee (from
ca955293cdfd3139e150d3b4fed3922a7eb651fb)
Author: Pavel Roskin <proski@gnu.org>
Date: Thu Sep 1 19:10:12 2005 -0400
Change orinoco_translate_scan() to return error code on error.
Adjust the caller to check for errors and clean up if needed.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ZenIV.linux.org.uk [Fri, 2 Sep 2005 19:13:40 +0000 (20:13 +0100)]
[PATCH] Kconfig fix (PHYLIB vs. s390)
drivers/net/phy/phy.c is broken on s390; it uses enable_irq() and friends
and these do not exist on s390. Marked as broken for now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Al Viro [Thu, 25 Aug 2005 05:24:56 +0000 (06:24 +0100)]
[PATCH] (15/22) Kconfig fix (82596)
driver is non-modular
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Dale Farnsworth [Fri, 2 Sep 2005 20:49:10 +0000 (13:49 -0700)]
[PATCH] mv643xx: add netpoll api support
Add support for the netpoll api for use by netconsole, kgdb, etc.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Dale Farnsworth [Fri, 2 Sep 2005 19:36:48 +0000 (12:36 -0700)]
[PATCH] mv643xx: Fix promiscuous mode handling
mv643xx_eth_get_config_reg() was reading the wrong register.
mv643xx_eth_set_config_reg() was or'ing instead of setting the
register. These functions are trivial and both are called only from
mv643xx_eth_set_rx_mode() when changing to/from promiscuous mode.
Remove both functions and do the operations directly in
mv643xx_eth_set_rx_mode().
Also, maintain promiscuous mode setting across port resets.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Dale Farnsworth [Fri, 2 Sep 2005 19:34:35 +0000 (12:34 -0700)]
[PATCH] mv643xx: Disable per port bandwidth limits
The mv643xx chips support per port bandwith limits. This patch
disables the bandwidth limits by clearing the MTU register.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Dale Farnsworth [Fri, 2 Sep 2005 17:25:24 +0000 (10:25 -0700)]
[PATCH] mv643xx: fix outstanding tx skb counter
This patch corrects the accounting of outstanding tx skbs. It fixes
a bug that causes "Error on Queue Full" messages seen since scatter-gather
was enabled by using the hardware tcp/udp checksum generator.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Dale Farnsworth [Thu, 1 Sep 2005 16:59:23 +0000 (09:59 -0700)]
[PATCH] mv643xx: fix skb memory leak
This patch fixes an skb memory leak under heavy receive load
(whenever the more packets have been received than the NAPI budget
allows to be processed).
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Francois Romieu [Fri, 2 Sep 2005 22:57:51 +0000 (00:57 +0200)]
[PATCH] sis190: basic sis191 support
The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.
The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Francois Romieu [Fri, 2 Sep 2005 22:56:57 +0000 (00:56 +0200)]
[PATCH] sis190: RGMII Tx internal delay fiddling
Don't ask.
The patch is based on SiS's GPLed driver.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Francois Romieu [Fri, 2 Sep 2005 22:56:16 +0000 (00:56 +0200)]
[PATCH] sis190: make 10Mbps the default when handling the StationControl register
This patch does three things:
- widen the access to the StationControl register (note the SIS_W16
versus SIS_W32 change);
- default to 10Mbps half duplex when the LPA can not be evaluated
(reg31->ctl is identical for both). It can be argued that it makes
sense as the lowest common denominator when everything else failed.
Btw it works better than the current code. :o)
- remove some enums: they do not document anymore.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Francois Romieu [Fri, 2 Sep 2005 22:55:27 +0000 (00:55 +0200)]
[PATCH] sis190: recent chipsets from SiS include a RGMII
Extracted from SiS's GPLed driver. From the few pdf available at SiS's,
it seems that the 965 and the 966 south bridge include this interface
whereas the 965L (and anything below) does not. It is expected to be a
sis191 related feature and should not hurt the existing sis190 driver.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Francois Romieu [Fri, 2 Sep 2005 22:54:25 +0000 (00:54 +0200)]
[PATCH] sis190: unmask the link change events
link changes reporting does not work when the driver masks its irq event
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Peter Chubb [Sat, 3 Sep 2005 21:05:06 +0000 (14:05 -0700)]
[PATCH] 'mdio_bus_exit' in discarded section .text.exit
When building with CONFIG_PHYLIB=y on Itanium, I see:
`mdio_bus_exit' referenced in section `.init.text' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o
I believe that mdio_bus_exit should not be declared __exit, because it is
referencesd from __init sections in, say, phy_init().
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Adrian Bunk [Sat, 3 Sep 2005 21:04:55 +0000 (14:04 -0700)]
[PATCH] drivers/net/ne3210.c: cleanups
- make two needlessly global functions static
- kill an ancient version variable
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ftp.linux.org.uk [Mon, 5 Sep 2005 02:26:18 +0000 (03:26 +0100)]
[PATCH] (7/7) __user annotations (ethtool)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ftp.linux.org.uk [Mon, 5 Sep 2005 02:26:13 +0000 (03:26 +0100)]
[PATCH] (6/7) missing include (ipw2200)
added missing include of dma-mapping.h
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ftp.linux.org.uk [Mon, 5 Sep 2005 02:26:08 +0000 (03:26 +0100)]
[PATCH] (5/7) iomem annotations, NULL noise removal (ipw2100)
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ftp.linux.org.uk [Mon, 5 Sep 2005 02:26:03 +0000 (03:26 +0100)]
[PATCH] (4/7) missing include (uli526x)
added missing include of dma-mapping.h, removed bogus ptrace.h (what the
hell was it doing there, in the first place?)
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ftp.linux.org.uk [Mon, 5 Sep 2005 02:25:58 +0000 (03:25 +0100)]
[PATCH] (3/7) iomem annotations (s2io)
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ftp.linux.org.uk [Mon, 5 Sep 2005 02:25:53 +0000 (03:25 +0100)]
[PATCH] (2/7) iomem annotations (e1000)
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
viro@ftp.linux.org.uk [Mon, 5 Sep 2005 02:25:48 +0000 (03:25 +0100)]
[PATCH] (1/7) chelsio sparse annotations
NULL noise removal, __iomem annotations, use of if_mii() instead of
open-coding it.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Richard Purdie [Mon, 5 Sep 2005 19:49:54 +0000 (20:49 +0100)]
[ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new hardware
Patch from Richard Purdie
This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop
devices by adding a scoop to pcmcia slot mapping structure. It adds platform
support for poodle, is known to work on spitz (which is dual slot) and
should also support collie with a minor amount of further work.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 5 Sep 2005 19:47:53 +0000 (20:47 +0100)]
[ARM] 2876/1: N30 - remove task to toggle USB D+ line
Patch from Ben Dooks
The n30 machine file is using a kernel thread to change the
state of the USB D+ pull-up resistor, which is not the proper
way to do this. Once the usb-gadget support for the 24xx is
merge, the proper access method will be added.
This patch also removes the problem of using HZ for the
msleep calls, from Nishanth Aravamudan.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jean Delvare [Sat, 3 Sep 2005 08:52:11 +0000 (10:52 +0200)]
[PATCH] I2C: Drop the I2C_ACK_TEST ioctl
Drop the I2C_ACK_TEST ioctl, which was commented out. It never really
existed (not after 1999 anyway), and there is no such thing as a ack
test on I2C/SMBus anyway.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jim Cromie [Fri, 2 Sep 2005 21:05:07 +0000 (23:05 +0200)]
[PATCH] hwmon: (3/3) pc87360 driver update
pc87360: consolidate fan helper
This patch consolidates the _set_fan_min() helper routine into the 2
line sysfs-callback wrapper that uses it.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jim Cromie [Fri, 2 Sep 2005 20:57:52 +0000 (22:57 +0200)]
[PATCH] hwmon: (2/3) pc87360 driver update
pc87360: number-skew to init
The temp, therm, fan, pwm callbacks all have an offset skew in the code
which accommodates attribute numbering conventions under
/sys/bus/i2c/devices/9191-6620/ (ie they start at 1)
This patch moves that skew into the declaration, and out of the
functions (except for therm, where we simplify from 2 skews to 1). The
declarative skew is clearer, less error-prone, and more efficient.
The use of 11+offset-4 below reflects the fact that the sysfs numbering
of these units is 4, 5, 6, but they use internal VLM units 11, 12, 13 to
measure the thermistor voltages.
There's one remaining skew factor, in *_crit callbacks below, because
there are no critical thresholds for voltages 0-10, only for those
supporting the thermistors.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jim Cromie [Fri, 2 Sep 2005 20:52:43 +0000 (22:52 +0200)]
[PATCH] hwmon: (1/3) pc87360 driver update
Use the new "dynamic sysfs callbacks", as introduced recently by Yani
Ioannou, in pc87360.
Note that this change isn't indiscriminate. Only those attributes that
would benefit from having an index (i.e., those which are
macro-repeated) have been converted.
This significantly shrinks the size of the module:
before: 49235 drivers/hwmon/pc87360.ko
after: 32532 drivers/hwmon/pc87360.ko
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>