broadcom/compiler: v71 isn't affected by double-rounding of viewport X,Y coords

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: generalize check for shaders using pixel center W

V3D 4.x has pixel center W in rf0 and V3D 7.x has it in rf3. We already
account for this when we setup the c->payload_w, so use that.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: fail packing on unhandled mul pack/unpack

We are doing this for the ADD alu already and it may be helpful to
identify cases where we have QPU code with pack/unpack modifiers on
MUL opcodes that we then are not packing into the actual QPU
instructions.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: add MOV integer packing/unpacking variants

These are new in v71 and cover MOV on both the ADD and the MUL alus.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: allow instruction merges in v71

In v3d 4.x there were restrictions based on the number of raddrs used
by the combined instructions, but we don't have these restrictions in
v3d 7.x.

It should be noted that while there are no restrictions on the number
of raddrs addressed, a QPU instruction can only address a single small
immediate, so we should be careful about that when we add support for
small immediates.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: don't schedule rf0 writes right after ldvary

ldvary writes rf0 implicitly on the next cycle so they would clash.
This case is not handled correctly by our normal dependency tracking,
which doesn't know anything about delayed writes from instructions
and thinks the rf0 write happens on the same cycle ldvary is emitted.

Fixes (v71):
dEQP-VK.glsl.conversions.matrix_to_matrix.mat2x3_to_mat4x2_fragment

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: CS payload registers have changed in v71

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: don't assign rf0 to temps across implicit rf0 writes

In platforms that don't have accumulators and have implicit writes to
the register file we need to be careful and avoid assigning a physical
register to a temp that lives across an implicit write to that same
physical register.

For now, we have the case of implicit writes to rf0 from various
signals, but it should be easy to extend this to include additional
registers if needed.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: only handle accumulator classes if present

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: rename vir_writes_rX to vir_writes_rX_implicitly

Since that represents more accurately what they check..

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: make vir_write_rX return false on platforms without accums

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: implement switch rules for fmin/fmax fadd/faddnf for v71

They use the same opcodes, and switch between one and the other based
on raddr.

Note that the rule includes also if small_imm_a/b are used. That is
still not in place so that part is hardcoded. Would be updated later
when small immediates support for v71 gets implemented.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: fix packing/unpacking of fmov variants for v71

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: add new ADD opcodes for FMOV/MOV in v71

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: prevent rf2-3 usage in thread end delay slots for v71

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: add a v3d71_qpu_writes_waddr_explicitly helper

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: implement read stall check for v71

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: implement "reads/writes too soon" checks for v71

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: update register classes to not include accumulators on v71

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu_schedule: update write deps for v71

We just need to add a write dep if rf0 is written implicitly.

Note that we don't need to check if we have accumulators when checking
for r3/r4/r5, as v3d_qpu_writes_rX would return false for hw version
that doesn't have accumulators.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: payload_w is loaded on rf3 for v71

And in general rf0 is now used for other needs.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: add support for varyings on nir to vir generation for v71

Needs update as v71 doesn't have accumulators anymore, and ldvary uses
now rf0 to return the value.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: return false on qpu_writes_accumulatorXX helpers for v71

As for v71 doesn't have accumulators (devinfo->has_accumulators set to
false), those methods would always return false.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: update disasm_raddr for v71

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu_schedule: add process_raddr_deps

On v71 we don't have muxes, but more raddr. Adding a equivalent add
deps function.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: update vir_to_qpu::set_src for v71

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/vir: implement is_no_op_mov for v71

Did some refactoring/splitting.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: don't favor/select accum registers for hw not supporting it

Note that what we do is to just return false on the favor/select accum
methods. We could just avoid to call them, but as the select is called
more than once, it is just easier this way.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: phys index depends on hw version

For 7.1 there are not accumulators. So we replace the macro with a
function call.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: update node/temp translation for v71

As the offset applied needs to take into account if we have
accumulators or not.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: add pack/unpack support for v71

Note that we provide new v71 alu pack/unpack methods. As there are a
lot that it is equivalent, initially we tried to use existing methods
as template and add version checks on the existing methods. At some
early point that become just really unreadable, so it become better to
just provide new methods, even if v42 and v71 methods have a really
similar structure.

Note that we have splitted the op tables, and created a two (add/mul)
for v71. As the description struct include versioning info, we could
have just used one table. But, specially with the add table, there are
a lot of differences with v71. So it is slightly tidier this
way. Also, taking into account that we do a linear search on the
tables, this can be even justified by performance.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: add qpu_writes_rf0_implicitly helper

On v71 rf0 replaces r5 as the register that gets updated implicitly
with uniform loads, and gets the C coefficient with ldvary. This
helper return if rf0 gets implicitly updated.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/commmon: add has_accumulators field on v3d_device_info

Even if we can just check for the version on the code, checking for
this field makes several places more readable. So for example, on the
register allocate code we doesn't assign an accumulator because we
don't have accumulators on that hw, instead of because hw version is a
given one.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: defining shift/mask for raddr_c/d

On V3D 7.x it replaces mul_a/b and add_a/b

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: add raddr on v3d_qpu_input

On V3D 7.x mux are not used, and raddr_a/b/c/d are used instead

This is not perfect, as for v71, the raddr_a/b defined at qpu_instr
became superfluous. But the alternative would be to define two
different structs, or even having them defined based on version
ifdefs, so this is a reasonable compromise.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: define v3d_qpu_input, use on v3d_qpu_alu_instr

At this point it just tidy up a little the alu_instr structure.

But also serves to prepare the structure for new changes, as 7.x uses
raddr instead of mux, and it is just easier to add the raddr to the
new input structure.

Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: add v71 signal map

Compared with v41, the differences are:
   * 14, 15, 29 and 30 are now about immediate a, b, c, d respectively
   * 23 is now reserved. On v42 this was for rotate signals, that are
     gone on v71.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: add small_imm a/c/d on v3d_qpu_sig

small_imm_a, small_imm_c and small_imm_d added on top of the already
existing small_imm_b, as V3D 7.1 defines 4 small immediates, tied to
the 4 raddr. Note that this is only the definition, and just a inst
validation rule to check that are not used before v71. Any real use is
still pending.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/compiler: rename small_imm to small_imm_b

Current small_imm is associated with the "B" read address.

We do this change in advance for v71 support, where we will have 4
different small_imm (a/b/c/d), so we start with a renaming.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: set V3D 7.x names for some waddr aliasing

V3D 7.x got rid of the accumulator, but still uses the values for
WADDR_R5 and WADDR_R5REP, so let's return a proper name and add some
aliases.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/qpu: add comments on waddr not used on V3D 7.x

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/common: add some common v71 helpers

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/common: retrieve V3D revision number

The subrev field from the hub ident3 register is bumped with every
hardware revision doing backwards incompatible changes so we want to
keep track of this.

Instead of modifying the 'ver' field info to acommodate subrev info,
which would require a lot of changes, simply add a new 'rev' field in
devinfo that we can use when we need to make changes based on the
revision number of a hardware release.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/cle: update the packet definitions for new generation v71

Using as reference the spec for 7.1.5. This include totally new
packets, and redefine some that already existed on v42.

Full list:
 * Add Depth Bounds Test Limits
 * Redefine Tile Binning Mode Cfg
 * Redefine Cfg Bits. There are some changes on the fields:
   * Line Rasterization is now 1 bit size
   * Depth Bounds Enable (that takes one of the bits of Line Rasterization)
   * Early-Z/Early-Z updates enable bits (16-17) figure now as reserved.
   * New Z-Clipping mode field
 * Redefine Tile Rendering Mode Cfg (Common). Changes with respect to v42:
   * New log2 tile height/width fields starting at bit 52/55
   * Due those two news, end pad is smaller
   * sub-id has now a size of 3. Bit 4 is reserved.
   * Number of render targets: this field max value is now 7 (not
     reflected on the xml).
   * Maximum BPP is removed on v71 (now bits 40-41 are reserved)
   * Depth Buffer disable: on bit 44
 * Update Store Tile Buffer General
 * Adding Cfg Render Target Part1/2/3 packets: they replace v4X "Tile
   Rendering Mode Cfg (Color)" (real name "Rendering Configuration
   (Render Targets Config)"), "Tile Rendering Mode Cfg (Clear Colors
   Part1)", "Tile Rendering Mode Cfg (Clear Colors Part2)", and "Tile
   Rendering Mode Cfg (Clear Colors Part3)". On those old versions,
   the first packet is used to configure 4 render targets. Now that 8
   are supported, invididual per-render-target are used.
 * Update ZS clear values packet.
 * Add new v71 output formats
 * Define Clear Render Targets (Replaces Clear Tile Buffers from v42)
 * Redefine GL Shader State Record. Changes copared with v42:
   * Fields removed:
     * "Coordinate shader has separate input and output VPM blocks"
       (reserved bit now)
     * "Vertex shader has separate input and output VPM blocks"
       (reserved bit now)
     * "Address of table of default attribute Values." (we needed to
       change the start position for all the following fields)
   * New field:
     * "Never defer FEP depth writes to fragment shader auto Z writes
        on scoreboard conflict"
 * Redefine clipper xy scaling: Now it uses 1/64ths of pixels, instead
   of 1/256ths
 * Update texture shader state.
   * Notice we don't use an address type for these fields in the XML
     description. This is because the addresses are 64-bit aligned
     (even though the PRM doesn't say it) which means the 6 LSB bits
     are implicitly 0, but the fields are encoded before the 6th bit
     of their starting byte, so we can't use the usual trick we do
     with address types where the first 6 bits in the byte are
     implicitly overwritten by other fields and we have to encode this
     manually as a uint field. This would mean that if we had an
     actual BO we would also need to add it manually to the job's
     list, but since we don't have one, we don't have to do anything
     about it.
   * Add new RB_Swap field for texture shader state
   * Document Cb/Cr addresses as uint fields in texture shader state
 * Fixup Blend Config description: we now support 8 RTs.
 * TMU config parameter 2 has new fields
 * Add new clipper Z without guardband packet in v71
 * Add enums for the Z clip modes accepted in v71
 * Fix texture state array stride packing for V3D 7.1.5

Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom/simulator: reset CFG7 for compute dispatch in v71

This register is new in 7.x, it doesn't seem that we need to
do anything specific for now, but let's make sure it is reset
every time.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

broadcom(cle,clif,common,simulator): add 7.1 version on the list of versions to build

This adds 7.1 to the list of available V3D_VERSION, and first changes
on the simulator needed to get it working.

Note that we needed to touch all those 4 codebases because it is
needed if we want to use V3D_DEBUG=clif with the simulator, that it is
the easier way to see which packets a vulkan program is using.

About the simulator, this commit only handle the rename of some
registers. Any additional changes needed to get a proper support for
v71 will be handled them on following commits.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25450>

blorp: Use the correct miptail start LOD for surfaces

Use the correct miptail start LOD for the surfaces involved in the
XY_BLOCK_COPY_BLT/XY_FAST_COLOR_BLT instructions.

Thanks to Lionel for pointing out the issue.

Fixes: 46f45d62d1 ("intel/isl: Start using miptails")

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25688>

rusticl/memory: fix potential use-after-free in clEnqueueSVMFree

Fixes: bfee3a8563d ("rusticl: add support for fine-grained system SVM")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25719>

docs: update etnaviv extensions

Next round of feature updates.

Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25700>

ci_run_n_monitor: dependency jobs must always be started

Fixes: 6b49b477aca7ba572b06 ("ci/ci_run_n_monitor: simplify enable/cancel logic in monitor_pipeline()")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25715>

zink/ci: remove expected failures that are skipped for RADV

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25711>

meson: add wayland-protocols from meson wrapdb

Sometimes, users don't have a recent enough version of wayland-protocols
to build Mesa. But these days, Meson's WrapDB has a wrap that's more
than new enough for our needs.

If we add the wrap-file to the subprojects folder, we'll download a more
recent wrap if the installed version is too old (or doesn't exist at
all).

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25683>

r600: drop egcm_load_index_reg

This is now handled in SFN.
v2: remove obsolte comments (Vitaliy Kuzmin)

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25475>

r600/sfn: don't remove texture sources by using the enum value

We have to query the index first, otherwise we remove the wrong value.

Fixes: 02bb506c54f998cfbc907758282a5748755c67ea
    r600/sfn: Lower tex,txl,txb and txf to backend

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25475>

zink/ci: tighten the zink-radv-vangogh timeouts

The jobs should never take longer than 30 minutes, so let's enforce it!

Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25704>

radv/ci: tighten the vkcts-navi21 timeouts

The jobs should never take longer than 30 minutes, so let's enforce it!

Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25704>

ci/etnaviv: move failure to flake

Turns out, this passes sometimes... So let's mark it as a flake
instead.

Fixes: 7368a897528 ("ci/etnaviv: update ci expectation")
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25699>

pvr: Use common physical device properties

Make use of the common vulkan properties code introduced in [1].

[1]: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24575

Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25326>

pvr: Minor refactor of pvr_device.c

Moving a few functions further up here to prepare for the next commit;
should make the diffs a lot nicer. No (intentional) functional changes.

Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25326>

pvr: Don't pass pvr_physical_device when only device info is needed

Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25326>

Revert "ci/lima: farm is down, disable for now"

This reverts commit c7806daf43b47c463e0fc4b9d3896ee321cd17ae.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25702>

isaspec : fix isaspec build error in aosp

in Android 12 build have error "ninja:
'external/mesa/src/compiler/isaspec/README.rst', needed by
'out/target/product/s/obj/MESON_MESA3D_GEN/.timestamp', missing and
no known rule to make it" because commit:
d48d8aefdff44e8a6ece030a782dc9d152bb1d5d  (docs: Move isaspec out of
drivers/freedreno) modify isaspec.rst Location.

Signed-off-by: cheyang <cheyang@bytedance.com>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25697>

rusticl/kernel: Fix creation from programs not built for every device

OpenCL does not require that a kernel is created for every device. So we
shouldn't assume there is a build for every device.

API validation around launching kernels already takes this possibility
into account.

I did not verify if the commit below is actually the culprit and whether
this bug existed before that, but a fix for older code also would have to
look differently anyway.

Fixes: 323dcbb4b52 ("rusticl: Move NirKernelBuild to ProgramDevBuild")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/9968
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25696>

freedreno/rddecompiler: Decompile repeated IBs

Otherwise we don't reconstruct the whole cmdstream.

Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25677>

freedreno/rddecompiler: Use fd_dev_gen to pass gpu_id to ir3 disasm

Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25677>

include/dri_interface.h: restore define mistakenly removed in !25587

This file is a public API used by Xserver; removing something from it
means Xserver can't build anymore, and even if we fix Xserver, old
versions are still around and we want to keep them working to allow for
bisecting issues.

Fixes: 7301914755f5843f1095 ("dri: Remove __driDriverExtensions leftovers")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/9976
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25692>

Revert "intel/fs: limit register flag interaction of FIND_*LIVE_CHANNEL"

This reverts commit c9739e8912286a212359f3a5a4f958c6165ce2cc.

We don't have a full understanding of what is going on but reverting
definitely fixes a hang.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c9739e8912 ("intel/fs: limit register flag interaction of FIND_*LIVE_CHANNEL")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/9868
Tested-By: Valentin Geyer <trayshar@t-online.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25563>

intel: Prepare implementation of Wa_18019816803 and Wa_16013994831 for future platforms

Those workarounds are temporary for newer platforms so we can't use
INTEL_NEEDS_WA_*, luckly those already had runtime checks.
INTEL_NEEDS_WA_* was only used because it was accessing instructions
or fields of the instructions that only exists in gfx12 or gfx125.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25685>

nir/opt_algebraic: Optimize LLVM booleans

Helps OpenCL kernels.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25687>

intel/dev: Add 0x56ba-0x56bd DG2 PCI IDs

Cc: mesa-stable
Ref: https://lists.freedesktop.org/archives/intel-gfx/2023-October/337287.html
Ref: BSpec 44477
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25673>

anv/batch: Assert that extend_cb is non-NULL if the batch is out of space

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25672>

anv/batch: Check if batch already has an error in anv_queue_submit_simple_batch()

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25672>

ci/radeonsi: Drop an xfail for vangogh.

It's passed in the last 3 nightly runs.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25693>

ci/zink: Add a TGL flake that's showed up in nightlies recently.

I don't know how recently, since the nightlies were timing out for a long
time.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25693>

nir/print: Decode system values in the variable declarations.

decl_var system INTERP_MODE_NONE none vec4 #0
decl_var system INTERP_MODE_FLAT none mediump uint #1

turns into:

decl_var system INTERP_MODE_NONE none vec4 #0 (SYSTEM_VALUE_FRAG_COORD)
decl_var system INTERP_MODE_FLAT none mediump uint #1 (SYSTEM_VALUE_SUBGROUP_INVOCATION)

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25647>

zink: shrink vectors during optimization

this avoids a number of cases where a shader was reading more components
from an input than an output was providing. functionally there was never
any issue as these read components were subsequently rewritten to use
constant data, but the read itself is a spec violation

shrinking can't be done in finalize, however, as that enables the frontend
to optimize vertex states, which seems like a good thing but ends up being
a bad thing since it may or may not be consistent across frontends and I
don't wanna deal with having to reorder i/o locations in unintuitive ways

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25433>

nir/opt_algebraic: Reduce int64

If we just want the bottom 32-bits we don't need a full 64-bit operation.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25625>

nir/lower_io: Use load_global_constant for OpenCL

Map __constant with a 64-bit address format to load_global_constant instead of
load_global. This notably allows nir_opt_preamble to hoist the load.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25625>

nir/print: Handle KERNEL

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25625>

nir/legalize_16bit_sampler_srcs: Use instr_pass

Fixes the pass with multiple functions.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25625>

nir/opt_phi_precision: Work with libraries

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25625>

r600/sfn: Handle load_global_constant

as an alias of load_global, for CL.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Suggested-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25625>

ci: Uprev virglrenderer

Include the latest virglrenderer version.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25561>

anv: fixup spirv cap for ImageReadWithoutFormat on Gfx12.5

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 2e2491b76c ("anv: enable shaderStorageImageReadWithoutFormat on Gfx12.5+")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25573>

ci: add a630 trace flakes

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25684>

anv: Enable transfer queue only on ACM+ platforms

On older platforms, we have the blitter engine, but it lacks compression
handling and other features we need, unfortunately, so enable the
transfer queue only on ACM+ platforms.

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25667>

radv: skip GDS allocation for NGG streamout on GFX11

Only GDS OA is needed on GFX11.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25284>

radv: mark GDS as needed for XFB queries with NGG streamout on GFX11

This doesn't fix anything because gds_needed should already be TRUE
because it's initialized at pipeline bind time, but this will be needed
for skipping GDS allocation on GFX11.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25284>

amd/llvm,aco,radv: implement NGG streamout with GDS_STRMOUT registers on GFX11

According to RadeonSI, this is required for preemption, user queues,
and we only have to wait for VS after streamout which should be more
performant.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25284>

radv: enable radv_disable_aniso_single_level=true for Zink too

This seems the default OpenGL behavior as well as DX.

Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25642>

pvr: Don't merge subpasses on framebuffer-global dependancy

When we have a framebuffer-local dependency we cannot merge
subpasses.

dEQP tests fixed:
  dEQP-VK.renderpass.suballocation.attachment_allocation
    .input_output.{15,23,35,61,80,93}
  dEQP-VK.renderpass.suballocation.attachment_allocation
    .roll.{13,31,42,47,55,59,61,98}

Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25612>

tu: Use common `vk_subpass_dependency_is_fb_local()`

Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25612>

vulkan: Add `vk_subpass_dependency_is_fb_local()` helper

Some tilers check for framebuffer local dependancy to determine if
they can rearrange or merge some sub-passes without breaking
their dependencies. Adding a helper for that.

Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25612>

radv: disable primitive restart for non-indexed draws on GFX11

Primitive restart is also applied to non-indexed draws on AMD GPUs. On
GFX11, DISABLE_FOR_AUTO_INDEX can be set but we will need a different
solution for older GPUs.

This fixes all line related flakes in CI (at least).

Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25639>

mesa/st: ignore StencilSampling if stencil not part of the format

This avoids hitting assert in debug builds and incorrect rendering
on release in case GL_DEPTH_STENCIL_TEXTURE_MODE has been set to
GL_STENCIL_INDEX with a texture that does not have stencil.

Cc: mesa-stable
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25610>

venus: enable Vulkan 1.3 for Android 13 and above

Now that ndk translation support is ready for both Intel and AMD, we can
advertise Vulkan 1.3 on Android 13.

Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25666>

ci/ci_run_n_monitor: limit repetitions on --stress

--stress options now receives the number of repetitions or -1 to behave
as before.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25473>

ci/ci_run_n_monitor: allow <user>/<project> in --project

Allow to monitor pipelines in any <user>/<project> on gitlab.fdo.

If developers want to monitor MR pipelines, they can run with
--project mesa/mesa to force it to be picked from mesa username.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25473>

ci/ci_run_n_monitor: simplify enable/cancel logic in monitor_pipeline()

leave to enable_job() and cancel_job() to do the right thing according
to the job status.

let target canceled jobs to be re-runned.

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25473>

ci/ci_run_n_monitor: merge enable_job with retry_job

Signed-off-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25473>