review.tizen.org Git - platform/kernel/linux-starfive.git/log

ext4: do not commit super on read-only bdev

Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...

To avoid this, commit the error info in the superblock only if the
block device is writable.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: avoid ENOSPC when avoiding to reuse recently deleted inodes

When ext4 is running on a filesystem without a journal, it tries not to
reuse recently deleted inodes to provide better chances for filesystem
recovery in case of crash. However this logic forbids reuse of freed
inodes for up to 5 minutes and especially for filesystems with smaller
number of inodes can lead to ENOSPC errors returned when allocating new
inodes.

Fix the problem by allowing to reuse recently deleted inode if there's
no other inode free in the scanned range.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200318121317.31941-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: unregister sysfs path before destroying jbd2 journal

Call ext4_unregister_sysfs(), before destroying jbd2 journal,
since below might cause, NULL pointer dereference issue.
This got reported with LTP tests.

ext4_put_super() cat /sys/fs/ext4/loop2/journal_task
| ext4_attr_show();
ext4_jbd2_journal_destroy(); |
| journal_task_show()
| |
| task_pid_vnr(NULL);
sbi->s_journal = NULL;

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200318061301.4320-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: check for non-zero journal inum in ext4_calculate_overhead

While calculating overhead for internal journal, also check
that j_inum shouldn't be 0. Otherwise we get below error with
xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal
and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G L --------- -t - 4.18.0-167.el8.ppc64le #1
NIP: c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4
<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0
LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0
<...>
Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

Fixes: 3c816ded78bb ("ext4: use journal inode to determine journal overhead")
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove map_from_cluster from ext4_ext_map_blocks

We can use the variable allocated_clusters rather than map_from_clusters
to control reserved block/cluster accounting in ext4_ext_map_blocks.
This eliminates a variable and associated code and improves readability
a little.

Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200311205125.25061-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: clean up ext4_ext_insert_extent() call in ext4_ext_map_blocks()

Now that the eofblocks code has been removed, we don't need to assign
0 to err before calling ext4_ext_insert_extent() since it will assign
a return value to ret anyway.  The variable free_on_err can be
eliminated and replaced by a reference to allocated_clusters which
clearly conveys the idea that newly allocated blocks should be freed
when recovering from an extent insertion failure.  The error handling
code itself should be restructured so that it errors out immediately on
an insertion failure in the case where no new blocks have been allocated
(bigalloc) rather than proceeding further into the mapping code.  The
initializer for fb_flags can also be rearranged for improved
readability.  Finally, insert a missing space in nearby code.

No known bugs are addressed by this patch - it's simply a cleanup.

Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200311205033.25013-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: mark block bitmap corrupted when found instead of BUGON

We already has similar code in ext4_mb_complex_scan_group(), but
ext4_mb_simple_scan_group() still affected.

Other reports: https://www.spinics.net/lists/linux-ext4/msg60231.html

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20200310150156.641-1-dmonakhov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use flexible-array member for xattr structs

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200309180813.GA3347@embeddedor
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use flexible-array member in struct fname

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200309154838.GA31559@embeddedor
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Documentation: correct the description of FIEMAP_EXTENT_LAST

Currently FIEMAP_EXTENT_LAST is not working consistently across
different filesystem's fiemap implementations. So add more information
about how else this flag could set in other implementation.

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/5a00e8d4283d6849e0b8f408c8365b31fbc1d153.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: move ext4_fiemap to use iomap framework

This patch moves ext4_fiemap to use iomap framework.
For xattr a new 'ext4_iomap_xattr_ops' is added.

Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/b9f45c885814fcdd0631747ff0fe08886270828c.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: make ext4_ind_map_blocks work with fiemap

For indirect block mapping if the i_block > max supported block in inode
then ext4_ind_map_blocks() returns a -EIO error. But in case of fiemap
this could be a valid query to ->iomap_begin call.
So check if the offset >= s_bitmap_maxbytes in ext4_iomap_begin_report(),
then simply skip calling ext4_map_blocks().

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/87fa0ddc5967fa707656212a3b66a7233425325c.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: move ext4 bmap to use iomap infrastructure

ext4_iomap_begin is already implemented which provides ext4_map_blocks,
so just move the API from generic_block_bmap to iomap_bmap for iomap
conversion.

Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8bbd53bd719d5ccfecafcce93f2bf1d7955a44af.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: optimize ext4_ext_precache for 0 depth

This patch avoids the memory alloc & free path when depth is 0,
since anyway there is no extra caching done in that case.
So on checking depth 0, simply return early.

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/93da0d0f073c73358e85bb9849d8a5378d1da539.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: add IOMAP_F_MERGED for non-extent based mapping

IOMAP_F_MERGED needs to be set in case of non-extent based mapping.
This is needed in later patches for conversion of ext4_fiemap to use iomap.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/a4764c91c08c16d4d4a4b36defb2a08625b0e9b3.1582880246.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix a data race at inode->i_disksize

KCSAN find inode->i_disksize could be accessed concurrently.

BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end

write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:
ext4_write_end+0x53f/0x5b0
ext4_da_write_end+0x237/0x510
generic_perform_write+0x1c4/0x2a0
ext4_buffered_write_iter+0x13a/0x210
ext4_file_write_iter+0xe2/0x9b0
new_sync_write+0x29c/0x3a0
__vfs_write+0x92/0xa0
vfs_write+0xfc/0x2a0
ksys_write+0xe8/0x140
__x64_sys_write+0x4c/0x60
do_syscall_64+0x8a/0x2a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:
ext4_mark_iloc_dirty+0x716/0x1190
ext4_mark_inode_dirty+0xc9/0x360
ext4_convert_unwritten_extents+0x1bc/0x2a0
ext4_convert_unwritten_io_end_vec+0xc5/0x150
ext4_put_io_end+0x82/0x130
ext4_writepages+0xae7/0x16f0
do_writepages+0x64/0x120
__writeback_single_inode+0x7d/0x650
writeback_sb_inodes+0x3a4/0x860
__writeback_inodes_wb+0xc4/0x150
wb_writeback+0x43f/0x510
wb_workfn+0x3b2/0x8a0
process_one_work+0x39b/0x7e0
worker_thread+0x88/0x650
kthread+0x1d4/0x1f0
ret_from_fork+0x35/0x40

The plain read is outside of inode->i_data_sem critical section
which results in a data race. Fix it by adding READ_ONCE().

Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix a data race at inode->i_blocks

inode->i_blocks could be accessed concurrently as noticed by KCSAN,

BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes

write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118:
  inode_add_bytes+0x65/0xf0
  __inode_add_bytes at fs/stat.c:689
  (inlined by) inode_add_bytes at fs/stat.c:702
  ext4_mb_new_blocks+0x418/0xca0 [ext4]
  ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4]
  ext4_map_blocks+0x1a9/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block_unwritten+0x33/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  ext4_da_write_begin+0x35f/0x8f0 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65:
  ext4_do_update_inode+0x4a0/0xf60 [ext4]
  ext4_inode_blocks_set at fs/ext4/inode.c:4815
  ext4_mark_iloc_dirty+0xaf/0x160 [ext4]
  ext4_mark_inode_dirty+0x129/0x3e0 [ext4]
  ext4_convert_unwritten_extents+0x253/0x2d0 [ext4]
  ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4]
  ext4_end_io_rsv_work+0x22c/0x350 [ext4]
  process_one_work+0x54f/0xb90
  worker_thread+0x80/0x5f0
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

4 locks held by kworker/u256:0/8:
  #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90
  #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90
  #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4]
irq event stamp: 3009267
hardirqs last  enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last  enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

Reported by Kernel Concurrency Sanitizer on:
CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4]

The plain read is outside of inode->i_lock critical section which
results in a data race. Fix it by adding READ_ONCE() there.

Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

ext4: clean up error return for convert_initialized_extent()

Although convert_initialized_extent() can potentially return an error
code with a negative value, its returned value is assigned to an
unsigned variable containing a block count in ext4_ext_map_blocks() and
then returned to that function's caller. The code currently works,
though the way this happens is obscure. The code would be more
readable if it followed the error handling convention used elsewhere
in ext4_ext_map_blocks().

This patch does not address any known test failure or bug report - it's
simply a cleanup. It also addresses a nearby coding standard issue.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200218202656.21561-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

jbd2: improve comments about freeing data buffers whose page mapping is NULL

Improve comments in jbd2_journal_commit_transaction() to describe why
we don't need to clear the buffer_mapped bit for freeing file mapping
buffers whose page mapping is NULL.

Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com
Fixes: c96dceeabf76 ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer")
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use flexible-array members in struct dx_node and struct dx_root

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
int stuff;
struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200213160648.GA7054@embeddedor
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: use built-in RCU list checking in mballoc

list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled
by default.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200213152558.7070-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: delete declaration for ext4_split_extent()

There are no forward references for ext4_split_extent() in extents.c,
so delete its unnecessary declaration.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200212162141.22381-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: remove EXT4_EOFBLOCKS_FL and associated code

The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file
contains unwritten blocks past i_size.  It's set when ext4_fallocate
is called with the KEEP_SIZE flag to extend a file with an unwritten
extent.  However, this flag hasn't been useful functionally since
March, 2012, when a decision was made to remove it from ext4.

All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version
1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag
handling") at that time.  Now that enough time has passed to make
e2fsprogs versions containing this modification common, this patch now
removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as
well.

This change has two implications.  First, because pre-1.42.2 e2fsck
versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and
because that bit will never be set by newer kernels containing this
patch, old versions of e2fsck won't have a compatibility problem with
files created by newer kernels.

Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits
belonging to a file written by an older kernel.  If set, it will remain
in that state until the file is deleted.  Because e2fsck versions since
1.42.2 don't check the flag at all, no adverse effect is expected.
However, pre-1.42.2 e2fsck versions that do check the flag may report
that it is set when it ought not to be after a file has been truncated
or had its unwritten blocks written.  In this case, the old version of
e2fsck will offer to clear the flag.  No adverse effect would then
occur whether the user chooses to clear the flag or not.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: code cleanup for ext4_statfs_project()

Calling min_not_zero() to simplify complicated prjquota
limit comparison in ext4_statfs_project().

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Link: https://lore.kernel.org/r/20200210082445.2379-1-cgxu519@mykernel.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: start to support iopoll method

Since commit "b1b4705d54ab ext4: introduce direct I/O read using
iomap infrastructure", we can easily make ext4 support iopoll
method, just use iomap_dio_iopoll().

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20200207120758.2411-1-xiaoguang.wang@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: force buffer up-to-date while marking it dirty

Writeback errors can leave buffer in not up-to-date state when there
are errors during background writes. Force buffer up-to-date while
marking it dirty.

Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20191224190940.157952-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Linux 5.6-rc4

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Two more bug fixes (including a regression) for 5.6"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
jbd2: fix data races at struct journal_head

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"More bugfixes, including a few remaining "make W=1" issues such as too
  large frame sizes on some configurations.

  On the ARM side, the compiler was messing up shadow stacks between EL1
  and EL2 code, which is easily fixed with __always_inline"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: check descriptor table exits on instruction emulation
  kvm: x86: Limit the number of "kvm: disabled by bios" messages
  KVM: x86: avoid useless copy of cpufreq policy
  KVM: allow disabling -Werror
  KVM: x86: allow compiling as non-module with W=1
  KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
  KVM: Introduce pv check helpers
  KVM: let declaration of kvm_get_running_vcpus match implementation
  KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
  arm64: Ask the compiler to __always_inline functions used by KVM at HYP
  KVM: arm64: Define our own swab32() to avoid a uapi static inline
  KVM: arm64: Ask the compiler to __always_inline functions used at HYP
  kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
  KVM: arm/arm64: Fix up includes for trace.h

KVM: VMX: check descriptor table exits on instruction emulation

KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.

Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.

Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"I2C has three driver bugfixes for you. We agreed on the Mac regression
  to go in via I2C"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  macintosh: therm_windtunnel: fix regression when instantiating devices
  i2c: altera: Fix potential integer overflow
  i2c: jz4780: silence log flood on txabrt

ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()

If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash. The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728b99e ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

macintosh: therm_windtunnel: fix regression when instantiating devices

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+

jbd2: fix data races at struct journal_head

journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

LTP: starting fsync04
/dev/zero: Can't open blockdev
EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
==================================================================
BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
irq event stamp: 1407125
hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

Reported by Kernel Concurrency Sanitizer on:
CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Four small fixes.

  Three are in drivers for fairly obvious bugs. The fourth is a set of
  regressions introduced by the compat_ioctl changes because some of the
  compat updates wrongly replaced .ioctl instead of .compat_ioctl"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
  scsi: zfcp: fix wrong data and display format of SFP+ temperature
  scsi: sd_sbc: Fix sd_zbc_report_zones()
  scsi: libfc: free response frame from GPN_ID

Merge tag 'pci-v5.6-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

- Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski)

- Update MAINTAINERS for recent Cadence driver file move (Lukas
   Bulwahn)

* tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Correct Cadence PCI driver path
  PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers

Merge tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Passthrough insertion fix (Ming)

- Kill off some unused arguments (John)

- blktrace RCU fix (Jan)

- Dead fields removal for null_blk (Dongli)

- NVMe polled IO fix (Bijan)

* tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  nvme-pci: Hold cq_poll_lock while completing CQEs
  blk-mq: Remove some unused function arguments
  null_blk: remove unused fields in 'nullb_cmd'
  blktrace: Protect q->blk_trace with RCU
  blk-mq: insert passthrough request into hctx->dispatch directly

Merge tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- Fix for a race with IOPOLL used with SQPOLL (Xiaoguang)

- Only show ->fdinfo if procfs is enabled (Tobias)

- Fix for a chain with multiple personalities in the SQEs

- Fix for a missing free of personality idr on exit

- Removal of the spin-for-work optimization

- Fix for next work lookup on request completion

- Fix for non-vec read/write result progation in case of links

- Fix for a fileset references on switch

- Fix for a recvmsg/sendmsg 32-bit compatability mode

* tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  io_uring: fix 32-bit compatability with sendmsg/recvmsg
  io_uring: define and set show_fdinfo only if procfs is enabled
  io_uring: drop file set ref put/get on switch
  io_uring: import_single_range() returns 0/-ERROR
  io_uring: pick up link work on submit reference drop
  io-wq: ensure work->task_pid is cleared on init
  io-wq: remove spin-for-work optimization
  io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL
  io_uring: fix personality idr leak
  io_uring: handle multiple personalities in link chains

Merge branch 'nvme-5.6-rc4' of git://git.infradead.org/nvme into block-5.6

Pull NVMe fix from Keith.

* 'nvme-5.6-rc4' of git://git.infradead.org/nvme:
nvme-pci: Hold cq_poll_lock while completing CQEs

Merge tag 'acpi-5.6-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"Fix a couple of configuration issues in the ACPI watchdog (WDAT)
  driver (Mika Westerberg) and make it possible to disable that driver
  at boot time in case it still does not work as expected (Jean
  Delvare)"

* tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: watchdog: Set default timeout in probe
  ACPI: watchdog: Fix gas->access_width usage
  ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
  ACPI: watchdog: Allow disabling WDAT at boot

Merge tag 'pm-5.6-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"Fix a recent cpufreq initialization regression (Rafael Wysocki),
  revert a devfreq commit that made incompatible changes and broke user
  land on some systems (Orson Zhai), drop a stale reference to a
  document that has gone away recently (Jonathan Neuschäfer), and fix a
  typo in a hibernation code comment (Alexandre Belloni)"

* tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Fix policy initialization for internal governor drivers
  Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
  PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
  Documentation: power: Drop reference to interface.rst

Merge tag 'zonefs-5.6-rc4' of git://git./linux/kernel/git/dlemoal/zonefs

Pull zonefs fixes from Damien Le Moal:
"Two fixes in here:

   - Revert the initial decision to silently ignore IOCB_NOWAIT for
     asynchronous direct IOs to sequential zone files. Instead, return
     an error to the user to signal that the feature is not supported
     (from Christoph)

   - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures
     if no other file system already selected this option (from
     Johannes)"

* tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: select FS_IOMAP
  zonefs: fix IOCB_NOWAIT handling

Merge tag 'kvmarm-fixes-5.6-1' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.6, take #1

- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline

kvm: x86: Limit the number of "kvm: disabled by bios" messages

In older version of systemd(219), at boot time, udevadm is called with :
/usr/bin/udevadm trigger --type=devices --action=add"

This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent,
leading to the "kvm: disabled by bios" message in case of your Bios disabled
the virtualization extensions.

On a modern system running up to 256 CPU threads, this pollutes the Kernel logs.

This patch offers to ratelimit this message to avoid any userspace program triggering
this uevent printing this message too often.

This patch is only a workaround but greatly reduce the pollution without
breaking the current behavior of printing a message if some try to instantiate
KVM on a system that doesn't support it.

Note that recent versions of systemd (>239) do not have trigger this behavior.

This patch will be useful at least for some using older systemd with recent Kernels.

Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge branches 'pm-sleep' and 'pm-devfreq'

* pm-sleep:
  PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
  Documentation: power: Drop reference to interface.rst

* pm-devfreq:
  Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"

KVM: x86: avoid useless copy of cpufreq policy

struct cpufreq_policy is quite big and it is not a good idea
to allocate one on the stack. Just use cpufreq_cpu_get and
cpufreq_cpu_put which is even simpler.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: allow disabling -Werror

Restrict -Werror to well-tested configurations and allow disabling it
via Kconfig.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: allow compiling as non-module with W=1

Compile error with CONFIG_KVM_INTEL=y and W=1:

  CC      arch/x86/kvm/vmx/vmx.o
arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=]
   68 | static const struct x86_cpu_id vmx_cpu_id[] = {
      |                                ^~~~~~~~~~
cc1: all warnings being treated as errors

When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a
reference to the structure (or any code at all).  This makes W=1 compiles
unhappy.

Wrap both in a #ifdef to avoid the issue.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
[Do the same for CONFIG_KVM_AMD. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis

Nick Desaulniers Reported:

  When building with:
  $ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000
  The following warning is observed:
  arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in
  function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=]
  static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int
  vector)
              ^
  Debugging with:
  https://github.com/ClangBuiltLinux/frame-larger-than
  via:
  $ python3 frame_larger_than.py arch/x86/kernel/kvm.o \
    kvm_send_ipi_mask_allbutself
  points to the stack allocated `struct cpumask newmask` in
  `kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is
  potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for
  the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as
  8192, making a single instance of a `struct cpumask` 1024 B.

This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for
both pv tlb and pv ipis..

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: Introduce pv check helpers

Introduce some pv check helpers for consistency.

Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: let declaration of kvm_get_running_vcpus match implementation

Sparse notices that declaration and implementation do not match:
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: warning: incorrect type in return expression (different address spaces)
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: expected struct kvm_vcpu [noderef] <asn:3> **
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: got struct kvm_vcpu *[noderef] <asn:3> *

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter

Even if APICv is disabled at startup, the backing page and ir_list need
to be initialized in case they are needed later. The only case in
which this can be skipped is for userspace irqchip, and that must be
done because avic_init_backing_page dereferences vcpu->arch.apic
(which is NULL for userspace irqchip).

Tested-by: rmuncrief@humanavance.com
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'drm-fixes-2020-02-28' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Just some fixes for this week: amdgpu, radeon and i915.

  The main i915 one is a regression Gen7 (Ivybridge/Haswell), this moves
  them back from trying to use the full-ppgtt support to the aliasing
  version it used to use due to gpu hangs. Otherwise it's pretty quiet.

  amdgpu:
   - Drop DRIVER_USE_AGP
   - Fix memory leak in GPU reset
   - Resume fix for raven

  radeon:
   - Drop DRIVER_USE_AGP

  i915:
   - downgrade gen7 back to aliasing-ppgtt to avoid GPU hangs
   - shrinker fix
   - pmu leak and double free fixes
   - gvt user after free and virtual display reset fixes
   - randconfig build fix"

* tag 'drm-fixes-2020-02-28' of git://anongit.freedesktop.org/drm/drm:
  drm/radeon: Inline drm_get_pci_dev
  drm/amdgpu: Drop DRIVER_USE_AGP
  drm/i915: Avoid recursing onto active vma from the shrinker
  drm/i915/pmu: Avoid using globals for PMU events
  drm/i915/pmu: Avoid using globals for CPU hotplug state
  drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt
  drm/i915: fix header test with GCOV
  amdgpu/gmc_v9: save/restore sdpif regs during S3
  drm/amdgpu: fix memory leak during TDR test(v2)
  drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetime
  drm/i915/gvt: Separate display reset from ALL_ENGINES reset

Merge tag 'drm-intel-fixes-2020-02-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.6-rc4:
- downgrade gen7 back to aliasing-ppgtt to avoid GPU hangs
- shrinker fix
- pmu leak and double free fixes
- gvt user after free and virtual display reset fixes
- randconfig build fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/874kvcsh00.fsf@intel.com

Merge tag 'amd-drm-fixes-5.6-2020-02-26' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-02-26:

amdgpu:
- Drop DRIVER_USE_AGP
- Fix memory leak in GPU reset
- Resume fix for raven

radeon:
- Drop DRIVER_USE_AGP

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227034106.3912-1-alexander.deucher@amd.com

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Fix leak in nl80211 AP start where we leak the ACL memory, from
    Johannes Berg.

2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski.

3) Fix RCU stall in ipset, from Jozsef Kadlecsik.

4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna
    Bhowmik.

5) Fix race causing TX hang in ll_temac, from Esben Haabendal.

6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov.

7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha
    Nambiar.

8) Size netlink responses properly in schedule action code to take into
    consideration TCA_ACT_FLAGS. From Jiri Pirko.

9) Fix firmware paths for mscc PHY driver, from Antoine Tenart.

10) Don't register stmmac notifier multiple times, from Aaro Koskinen.

11) Various rmnet bug fixes, from Taehee Yoo.

12) Fix vsock deadlock in vsock transport release, from Stefano
    Garzarella.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  net: dsa: mv88e6xxx: Fix masking of egress port
  mlxsw: pci: Wait longer before accessing the device after reset
  sfc: fix timestamp reconstruction at 16-bit rollover points
  vsock: fix potential deadlock in transport->release()
  unix: It's CONFIG_PROC_FS not CONFIG_PROCFS
  net: rmnet: fix packet forwarding in rmnet bridge mode
  net: rmnet: fix bridge mode bugs
  net: rmnet: use upper/lower device infrastructure
  net: rmnet: do not allow to change mux id if mux id is duplicated
  net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()
  net: rmnet: fix suspicious RCU usage
  net: rmnet: fix NULL pointer dereference in rmnet_changelink()
  net: rmnet: fix NULL pointer dereference in rmnet_newlink()
  net: phy: marvell: don't interpret PHY status unless resolved
  mlx5: register lag notifier for init network namespace only
  unix: define and set show_fdinfo only if procfs is enabled
  hinic: fix a bug of rss configuration
  hinic: fix a bug of setting hw_ioctxt
  hinic: fix a irq affinity bug
  net/smc: check for valid ib_client_data
  ...

MAINTAINERS: Correct Cadence PCI driver path

de80f95ccb9c ("PCI: cadence: Move all files to per-device cadence
directory") moved files of the PCI cadence drivers, but did not update the
MAINTAINERS entry.

Since then, ./scripts/get_maintainer.pl --self-test complains:

warning: no file matches F: drivers/pci/controller/pcie-cadence*

Repair the MAINTAINERS entry.

Link: https://lore.kernel.org/r/20200221185402.4703-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

io_uring: fix 32-bit compatability with sendmsg/recvmsg

We must set MSG_CMSG_COMPAT if we're in compatability mode, otherwise
the iovec import for these commands will not do the right thing and fail
the command with -EINVAL.

Found by running the test suite compiled as 32-bit.

Cc: stable@vger.kernel.org
Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()")
Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

net: dsa: mv88e6xxx: Fix masking of egress port

Add missing ~ to the usage of the mask.

Reported-by: Kevin Benson <Kevin.Benson@zii.aero>
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Fixes: 5c74c54ce6ff ("net: dsa: mv88e6xxx: Split monitor port configuration")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: pci: Wait longer before accessing the device after reset

During initialization the driver issues a reset to the device and waits
for 100ms before checking if the firmware is ready. The waiting is
necessary because before that the device is irresponsive and the first
read can result in a completion timeout.

While 100ms is sufficient for Spectrum-1 and Spectrum-2, it is
insufficient for Spectrum-3.

Fix this by increasing the timeout to 200ms.

Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: fix timestamp reconstruction at 16-bit rollover points

We can't just use the top bits of the last sync event as they could be
off-by-one every 65,536 seconds, giving an error in reconstruction of
65,536 seconds.

This patch uses the difference in the bottom 16 bits (mod 2^16) to
calculate an offset that needs to be applied to the last sync event to
get to the current time.

Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com>
Acked-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock: fix potential deadlock in transport->release()

Some transports (hyperv, virtio) acquire the sock lock during the
.release() callback.

In the vsock_stream_connect() we call vsock_assign_transport(); if
the socket was previously assigned to another transport, the
vsk->transport->release() is called, but the sock lock is already
held in the vsock_stream_connect(), causing a deadlock reported by
syzbot:

    INFO: task syz-executor280:9768 blocked for more than 143 seconds.
      Not tainted 5.6.0-rc1-syzkaller #0
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    syz-executor280 D27912  9768   9766 0x00000000
    Call Trace:
     context_switch kernel/sched/core.c:3386 [inline]
     __schedule+0x934/0x1f90 kernel/sched/core.c:4082
     schedule+0xdc/0x2b0 kernel/sched/core.c:4156
     __lock_sock+0x165/0x290 net/core/sock.c:2413
     lock_sock_nested+0xfe/0x120 net/core/sock.c:2938
     virtio_transport_release+0xc4/0xd60 net/vmw_vsock/virtio_transport_common.c:832
     vsock_assign_transport+0xf3/0x3b0 net/vmw_vsock/af_vsock.c:454
     vsock_stream_connect+0x2b3/0xc70 net/vmw_vsock/af_vsock.c:1288
     __sys_connect_file+0x161/0x1c0 net/socket.c:1857
     __sys_connect+0x174/0x1b0 net/socket.c:1874
     __do_sys_connect net/socket.c:1885 [inline]
     __se_sys_connect net/socket.c:1882 [inline]
     __x64_sys_connect+0x73/0xb0 net/socket.c:1882
     do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

To avoid this issue, this patch remove the lock acquiring in the
.release() callback of hyperv and virtio transports, and it holds
the lock when we call vsk->transport->release() in the vsock core.

Reported-by: syzbot+731710996d79d0d58fbc@syzkaller.appspotmail.com
Fixes: 408624af4c89 ("vsock: use local transport when it is loaded")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

unix: It's CONFIG_PROC_FS not CONFIG_PROCFS

Fixes: 3a12500ed5dd ("unix: define and set show_fdinfo only if procfs is enabled")
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-rmnet-fix-several-bugs'

Taehee Yoo says:

====================
net: rmnet: fix several bugs

This patchset is to fix several bugs in RMNET module.

1. The first patch fixes NULL-ptr-deref in rmnet_newlink().
When rmnet interface is being created, it uses IFLA_LINK
without checking NULL.
So, if userspace doesn't set IFLA_LINK, panic will occur.
In this patch, checking NULL pointer code is added.

2. The second patch fixes NULL-ptr-deref in rmnet_changelink().
To get real device in rmnet_changelink(), it uses IFLA_LINK.
But, IFLA_LINK should not be used in rmnet_changelink().

3. The third patch fixes suspicious RCU usage in rmnet_get_port().
rmnet_get_port() uses rcu_dereference_rtnl().
But, rmnet_get_port() is used by datapath.
So, rcu_dereference_bh() should be used instead of rcu_dereference_rtnl().

4. The fourth patch fixes suspicious RCU usage in
rmnet_force_unassociate_device().
RCU critical section should not be scheduled.
But, unregister_netdevice_queue() in the rmnet_force_unassociate_device()
would be scheduled.
So, the RCU warning occurs.
In this patch, the rcu_read_lock() in the rmnet_force_unassociate_device()
is removed because it's unnecessary.

5. The fifth patch fixes duplicate MUX ID case.
RMNET MUX ID is unique.
So, rmnet interface isn't allowed to be created, which have
a duplicate MUX ID.
But, only rmnet_newlink() checks this condition, rmnet_changelink()
doesn't check this.
So, duplicate MUX ID case would happen.

6. The sixth patch fixes upper/lower interface relationship problems.
When IFLA_LINK is used, the upper/lower infrastructure should be used.
Because it checks the maximum depth of upper/lower interfaces and it also
checks circular interface relationship, etc.
In this patch, netdev_upper_dev_link() is used.

7. The seventh patch fixes bridge related problems.
a) ->ndo_del_slave() doesn't work.
b) It couldn't detect circular upper/lower interface relationship.
c) It couldn't prevent stack overflow because of too deep depth
of upper/lower interface
d) It doesn't check the number of lower interfaces.
e) Panics because of several reasons.
These problems are actually the same problem.
So, this patch fixes these problems.

8. The eighth patch fixes packet forwarding issue in bridge mode
Packet forwarding is not working in rmnet bridge mode.
Because when a packet is forwarded, skb_push() for an ethernet header
is needed. But it doesn't call skb_push().
So, the ethernet header will be lost.

Change log:
- update commit logs.
- drop two patches in this patchset because of wrong target branch.
   - ("net: rmnet: add missing module alias")
   - ("net: rmnet: print error message when command fails")
- remove unneessary rcu_read_lock() in the third patch.
- use rcu_dereference_bh() instead of rcu_dereference in third patch.
- do not allow to add a bridge device if rmnet interface is already
   bridge mode in the seventh patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: fix packet forwarding in rmnet bridge mode

Packet forwarding is not working in rmnet bridge mode.
Because when a packet is forwarded, skb_push() for an ethernet header
is needed. But it doesn't call skb_push().
So, the ethernet header will be lost.

Test commands:
    modprobe rmnet
    ip netns add nst
    ip netns add nst2
    ip link add veth0 type veth peer name veth1
    ip link add veth2 type veth peer name veth3
    ip link set veth1 netns nst
    ip link set veth3 netns nst2

    ip link add rmnet0 link veth0 type rmnet mux_id 1
    ip link set veth2 master rmnet0
    ip link set veth0 up
    ip link set veth2 up
    ip link set rmnet0 up
    ip a a 192.168.100.1/24 dev rmnet0

    ip netns exec nst ip link set veth1 up
    ip netns exec nst ip a a 192.168.100.2/24 dev veth1
    ip netns exec nst2 ip link set veth3 up
    ip netns exec nst2 ip a a 192.168.100.3/24 dev veth3
    ip netns exec nst2 ping 192.168.100.2

Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: fix bridge mode bugs

In order to attach a bridge interface to the rmnet interface,
"master" operation is used.
(e.g. ip link set dummy1 master rmnet0)
But, in the rmnet_add_bridge(), which is a callback of ->ndo_add_slave()
doesn't register lower interface.
So, ->ndo_del_slave() doesn't work.
There are other problems too.
1. It couldn't detect circular upper/lower interface relationship.
2. It couldn't prevent stack overflow because of too deep depth
of upper/lower interface
3. It doesn't check the number of lower interfaces.
4. Panics because of several reasons.

The root problem of these issues is actually the same.
So, in this patch, these all problems will be fixed.

Test commands:
    modprobe rmnet
    ip link add dummy0 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link add dummy1 master rmnet0 type dummy
    ip link add dummy2 master rmnet0 type dummy
    ip link del rmnet0
    ip link del dummy2
    ip link del dummy1

Splat looks like:
[   41.867595][ T1164] general protection fault, probably for non-canonical address 0xdffffc0000000101I
[   41.869993][ T1164] KASAN: null-ptr-deref in range [0x0000000000000808-0x000000000000080f]
[   41.872950][ T1164] CPU: 0 PID: 1164 Comm: ip Not tainted 5.6.0-rc1+ #447
[   41.873915][ T1164] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   41.875161][ T1164] RIP: 0010:rmnet_unregister_bridge.isra.6+0x71/0xf0 [rmnet]
[   41.876178][ T1164] Code: 48 89 ef 48 89 c6 5b 5d e9 fc fe ff ff e8 f7 f3 ff ff 48 8d b8 08 08 00 00 48 ba 00 7
[   41.878925][ T1164] RSP: 0018:ffff8880c4d0f188 EFLAGS: 00010202
[   41.879774][ T1164] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000101
[   41.887689][ T1164] RDX: dffffc0000000000 RSI: ffffffffb8cf64f0 RDI: 0000000000000808
[   41.888727][ T1164] RBP: ffff8880c40e4000 R08: ffffed101b3c0e3c R09: 0000000000000001
[   41.889749][ T1164] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 1ffff110189a1e3c
[   41.890783][ T1164] R13: ffff8880c4d0f200 R14: ffffffffb8d56160 R15: ffff8880ccc2c000
[   41.891794][ T1164] FS:  00007f4300edc0c0(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[   41.892953][ T1164] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.893800][ T1164] CR2: 00007f43003bc8c0 CR3: 00000000ca53e001 CR4: 00000000000606f0
[   41.894824][ T1164] Call Trace:
[   41.895274][ T1164]  ? rcu_is_watching+0x2c/0x80
[   41.895895][ T1164]  rmnet_config_notify_cb+0x1f7/0x590 [rmnet]
[   41.896687][ T1164]  ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet]
[   41.897611][ T1164]  ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet]
[   41.898508][ T1164]  ? __module_text_address+0x13/0x140
[   41.899162][ T1164]  notifier_call_chain+0x90/0x160
[   41.899814][ T1164]  rollback_registered_many+0x660/0xcf0
[   41.900544][ T1164]  ? netif_set_real_num_tx_queues+0x780/0x780
[   41.901316][ T1164]  ? __lock_acquire+0xdfe/0x3de0
[   41.901958][ T1164]  ? memset+0x1f/0x40
[   41.902468][ T1164]  ? __nla_validate_parse+0x98/0x1ab0
[   41.903166][ T1164]  unregister_netdevice_many.part.133+0x13/0x1b0
[   41.903988][ T1164]  rtnl_delete_link+0xbc/0x100
[ ... ]

Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: use upper/lower device infrastructure

netdev_upper_dev_link() is useful to manage lower/upper interfaces.
And this function internally validates looping, maximum depth.
All or most virtual interfaces that could have a real interface
(e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure.

Test commands:
    modprobe rmnet
    ip link add dummy0 type dummy
    ip link add rmnet1 link dummy0 type rmnet mux_id 1
    for i in {2..100}
    do
        let A=$i-1
        ip link add rmnet$i link rmnet$A type rmnet mux_id $i
    done
    ip link del dummy0

The purpose of the test commands is to make stack overflow.

Splat looks like:
[   52.411438][ T1395] BUG: KASAN: slab-out-of-bounds in find_busiest_group+0x27e/0x2c00
[   52.413218][ T1395] Write of size 64 at addr ffff8880c774bde0 by task ip/1395
[   52.414841][ T1395]
[   52.430720][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447
[   52.496511][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   52.513597][ T1395] Call Trace:
[   52.546516][ T1395]
[   52.558773][ T1395] Allocated by task 3171537984:
[   52.588290][ T1395] BUG: unable to handle page fault for address: ffffffffb999e260
[   52.589311][ T1395] #PF: supervisor read access in kernel mode
[   52.590529][ T1395] #PF: error_code(0x0000) - not-present page
[   52.591374][ T1395] PGD d6818067 P4D d6818067 PUD d6819063 PMD 0
[   52.592288][ T1395] Thread overran stack, or stack corrupted
[   52.604980][ T1395] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   52.605856][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447
[   52.611764][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   52.621520][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30
[   52.622296][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0
[   52.627887][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006
[   52.628735][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000
[   52.631773][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0
[   52.649584][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403
[   52.674857][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0
[   52.678257][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000
[   52.694541][ T1395] FS:  00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[   52.764039][ T1395] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   52.815008][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0
[   52.862312][ T1395] Call Trace:
[   52.887133][ T1395] Modules linked in: dummy rmnet veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_dex
[   52.936749][ T1395] CR2: ffffffffb999e260
[   52.965695][ T1395] ---[ end trace 7e32ca99482dbb31 ]---
[   52.966556][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30
[   52.971083][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0
[   53.003650][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006
[   53.043183][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000
[   53.076480][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0
[   53.093858][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403
[   53.112795][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0
[   53.139837][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000
[   53.141500][ T1395] FS:  00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[   53.143343][ T1395] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   53.152007][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0
[   53.156459][ T1395] Kernel panic - not syncing: Fatal exception
[   54.213570][ T1395] Shutting down cpus with NMI
[   54.354112][ T1395] Kernel Offset: 0x33000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0x)
[   54.355687][ T1395] Rebooting in 5 seconds..

Fixes: b37f78f234bf ("net: qualcomm: rmnet: Fix crash on real dev unregistration")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: do not allow to change mux id if mux id is duplicated

Basically, duplicate mux id isn't be allowed.
So, the creation of rmnet will be failed if there is duplicate mux id
is existing.
But, changelink routine doesn't check duplicate mux id.

Test commands:
    modprobe rmnet
    ip link add dummy0 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link add rmnet1 link dummy0 type rmnet mux_id 2
    ip link set rmnet1 type rmnet mux_id 1

Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()

The notifier_call() of the slave interface removes rmnet interface with
unregister_netdevice_queue().
But, before calling unregister_netdevice_queue(), it acquires
rcu readlock.
In the RCU critical section, sleeping isn't be allowed.
But, unregister_netdevice_queue() internally calls synchronize_net(),
which would sleep.
So, suspicious RCU usage warning occurs.

Test commands:
    modprobe rmnet
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link set dummy1 master rmnet0
    ip link del dummy0

Splat looks like:
[   79.639245][ T1195] =============================
[   79.640134][ T1195] WARNING: suspicious RCU usage
[   79.640852][ T1195] 5.6.0-rc1+ #447 Not tainted
[   79.641657][ T1195] -----------------------------
[   79.642472][ T1195] ./include/linux/rcupdate.h:273 Illegal context switch in RCU read-side critical section!
[   79.644043][ T1195]
[   79.644043][ T1195] other info that might help us debug this:
[   79.644043][ T1195]
[   79.645682][ T1195]
[   79.645682][ T1195] rcu_scheduler_active = 2, debug_locks = 1
[   79.646980][ T1195] 2 locks held by ip/1195:
[   79.647629][ T1195]  #0: ffffffffa3cf64f0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890
[   79.649312][ T1195]  #1: ffffffffa39256c0 (rcu_read_lock){....}, at: rmnet_config_notify_cb+0xf0/0x590 [rmnet]
[   79.651717][ T1195]
[   79.651717][ T1195] stack backtrace:
[   79.652650][ T1195] CPU: 3 PID: 1195 Comm: ip Not tainted 5.6.0-rc1+ #447
[   79.653702][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   79.655037][ T1195] Call Trace:
[   79.655560][ T1195]  dump_stack+0x96/0xdb
[   79.656252][ T1195]  ___might_sleep+0x345/0x440
[   79.656994][ T1195]  synchronize_net+0x18/0x30
[   79.661132][ T1195]  netdev_rx_handler_unregister+0x40/0xb0
[   79.666266][ T1195]  rmnet_unregister_real_device+0x42/0xb0 [rmnet]
[   79.667211][ T1195]  rmnet_config_notify_cb+0x1f7/0x590 [rmnet]
[   79.668121][ T1195]  ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet]
[   79.669166][ T1195]  ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet]
[   79.670286][ T1195]  ? __module_text_address+0x13/0x140
[   79.671139][ T1195]  notifier_call_chain+0x90/0x160
[   79.671973][ T1195]  rollback_registered_many+0x660/0xcf0
[   79.672893][ T1195]  ? netif_set_real_num_tx_queues+0x780/0x780
[   79.675091][ T1195]  ? __lock_acquire+0xdfe/0x3de0
[   79.675825][ T1195]  ? memset+0x1f/0x40
[   79.676367][ T1195]  ? __nla_validate_parse+0x98/0x1ab0
[   79.677290][ T1195]  unregister_netdevice_many.part.133+0x13/0x1b0
[   79.678163][ T1195]  rtnl_delete_link+0xbc/0x100
[ ... ]

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: fix suspicious RCU usage

rmnet_get_port() internally calls rcu_dereference_rtnl(),
which checks RTNL.
But rmnet_get_port() could be called by packet path.
The packet path is not protected by RTNL.
So, the suspicious RCU usage problem occurs.

Test commands:
    modprobe rmnet
    ip netns add nst
    ip link add veth0 type veth peer name veth1
    ip link set veth1 netns nst
    ip link add rmnet0 link veth0 type rmnet mux_id 1
    ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1
    ip netns exec nst ip link set veth1 up
    ip netns exec nst ip link set rmnet1 up
    ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1
    ip link set veth0 up
    ip link set rmnet0 up
    ip a a 192.168.100.1/24 dev rmnet0
    ping 192.168.100.2

Splat looks like:
[  146.630958][ T1174] WARNING: suspicious RCU usage
[  146.631735][ T1174] 5.6.0-rc1+ #447 Not tainted
[  146.632387][ T1174] -----------------------------
[  146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() !
[  146.634742][ T1174]
[  146.634742][ T1174] other info that might help us debug this:
[  146.634742][ T1174]
[  146.645992][ T1174]
[  146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1
[  146.646937][ T1174] 5 locks held by ping/1174:
[  146.647609][ T1174]  #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980
[  146.662463][ T1174]  #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150
[  146.671696][ T1174]  #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940
[  146.673064][ T1174]  #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150
[  146.690358][ T1174]  #4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020
[  146.699875][ T1174]
[  146.699875][ T1174] stack backtrace:
[  146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ #447
[  146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  146.706565][ T1174] Call Trace:
[  146.707102][ T1174]  dump_stack+0x96/0xdb
[  146.708007][ T1174]  rmnet_get_port.part.9+0x76/0x80 [rmnet]
[  146.709233][ T1174]  rmnet_egress_handler+0x107/0x420 [rmnet]
[  146.710492][ T1174]  ? sch_direct_xmit+0x1e2/0x1020
[  146.716193][ T1174]  rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet]
[  146.717012][ T1174]  dev_hard_start_xmit+0x160/0x740
[  146.717854][ T1174]  sch_direct_xmit+0x265/0x1020
[  146.718577][ T1174]  ? register_lock_class+0x14d0/0x14d0
[  146.719429][ T1174]  ? dev_watchdog+0xac0/0xac0
[  146.723738][ T1174]  ? __dev_queue_xmit+0x15fd/0x2940
[  146.724469][ T1174]  ? lock_acquire+0x164/0x3b0
[  146.725172][ T1174]  __dev_queue_xmit+0x20c7/0x2940
[ ... ]

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: fix NULL pointer dereference in rmnet_changelink()

In the rmnet_changelink(), it uses IFLA_LINK without checking
NULL pointer.
tb[IFLA_LINK] could be NULL pointer.
So, NULL-ptr-deref could occur.

rmnet already has a lower interface (real_dev).
So, after this patch, rmnet_changelink() does not use IFLA_LINK anymore.

Test commands:
    modprobe rmnet
    ip link add dummy0 type dummy
    ip link add rmnet0 link dummy0 type rmnet mux_id 1
    ip link set rmnet0 type rmnet mux_id 2

Splat looks like:
[   90.578726][ T1131] general protection fault, probably for non-canonical address 0xdffffc0000000000I
[   90.581121][ T1131] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   90.582380][ T1131] CPU: 2 PID: 1131 Comm: ip Not tainted 5.6.0-rc1+ #447
[   90.584285][ T1131] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   90.587506][ T1131] RIP: 0010:rmnet_changelink+0x5a/0x8a0 [rmnet]
[   90.588546][ T1131] Code: 83 ec 20 48 c1 ea 03 80 3c 02 00 0f 85 6f 07 00 00 48 8b 5e 28 48 b8 00 00 00 00 00 0
[   90.591447][ T1131] RSP: 0018:ffff8880ce78f1b8 EFLAGS: 00010247
[   90.592329][ T1131] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff8880ce78f8b0
[   90.593253][ T1131] RDX: 0000000000000000 RSI: ffff8880ce78f4a0 RDI: 0000000000000004
[   90.594058][ T1131] RBP: ffff8880cf543e00 R08: 0000000000000002 R09: 0000000000000002
[   90.594859][ T1131] R10: ffffffffc0586a40 R11: 0000000000000000 R12: ffff8880ca47c000
[   90.595690][ T1131] R13: ffff8880ca47c000 R14: ffff8880cf545000 R15: 0000000000000000
[   90.596553][ T1131] FS:  00007f21f6c7e0c0(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[   90.597504][ T1131] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   90.599418][ T1131] CR2: 0000556e413db458 CR3: 00000000c917a002 CR4: 00000000000606e0
[   90.600289][ T1131] Call Trace:
[   90.600631][ T1131]  __rtnl_newlink+0x922/0x1270
[   90.601194][ T1131]  ? lock_downgrade+0x6e0/0x6e0
[   90.601724][ T1131]  ? rtnl_link_unregister+0x220/0x220
[   90.602309][ T1131]  ? lock_acquire+0x164/0x3b0
[   90.602784][ T1131]  ? is_bpf_image_address+0xff/0x1d0
[   90.603331][ T1131]  ? rtnl_newlink+0x4c/0x90
[   90.603810][ T1131]  ? kernel_text_address+0x111/0x140
[   90.604419][ T1131]  ? __kernel_text_address+0xe/0x30
[   90.604981][ T1131]  ? unwind_get_return_address+0x5f/0xa0
[   90.605616][ T1131]  ? create_prof_cpu_mask+0x20/0x20
[   90.606304][ T1131]  ? arch_stack_walk+0x83/0xb0
[   90.606985][ T1131]  ? stack_trace_save+0x82/0xb0
[   90.607656][ T1131]  ? stack_trace_consume_entry+0x160/0x160
[   90.608503][ T1131]  ? deactivate_slab.isra.78+0x2c5/0x800
[   90.609336][ T1131]  ? kasan_unpoison_shadow+0x30/0x40
[   90.610096][ T1131]  ? kmem_cache_alloc_trace+0x135/0x350
[   90.610889][ T1131]  ? rtnl_newlink+0x4c/0x90
[   90.611512][ T1131]  rtnl_newlink+0x65/0x90
[ ... ]

Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rmnet: fix NULL pointer dereference in rmnet_newlink()

rmnet registers IFLA_LINK interface as a lower interface.
But, IFLA_LINK could be NULL.
In the current code, rmnet doesn't check IFLA_LINK.
So, panic would occur.

Test commands:
    modprobe rmnet
    ip link add rmnet0 type rmnet mux_id 1

Splat looks like:
[   36.826109][ T1115] general protection fault, probably for non-canonical address 0xdffffc0000000000I
[   36.838817][ T1115] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   36.839908][ T1115] CPU: 1 PID: 1115 Comm: ip Not tainted 5.6.0-rc1+ #447
[   36.840569][ T1115] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   36.841408][ T1115] RIP: 0010:rmnet_newlink+0x54/0x510 [rmnet]
[   36.841986][ T1115] Code: 83 ec 18 48 c1 e9 03 80 3c 01 00 0f 85 d4 03 00 00 48 8b 6a 28 48 b8 00 00 00 00 00 c
[   36.843923][ T1115] RSP: 0018:ffff8880b7e0f1c0 EFLAGS: 00010247
[   36.844756][ T1115] RAX: dffffc0000000000 RBX: ffff8880d14cca00 RCX: 1ffff11016fc1e99
[   36.845859][ T1115] RDX: 0000000000000000 RSI: ffff8880c3d04000 RDI: 0000000000000004
[   36.846961][ T1115] RBP: 0000000000000000 R08: ffff8880b7e0f8b0 R09: ffff8880b6ac2d90
[   36.848020][ T1115] R10: ffffffffc0589a40 R11: ffffed1016d585b7 R12: ffffffff88ceaf80
[   36.848788][ T1115] R13: ffff8880c3d04000 R14: ffff8880b7e0f8b0 R15: ffff8880c3d04000
[   36.849546][ T1115] FS:  00007f50ab3360c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000
[   36.851784][ T1115] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   36.852422][ T1115] CR2: 000055871afe5ab0 CR3: 00000000ae246001 CR4: 00000000000606e0
[   36.853181][ T1115] Call Trace:
[   36.853514][ T1115]  __rtnl_newlink+0xbdb/0x1270
[   36.853967][ T1115]  ? lock_downgrade+0x6e0/0x6e0
[   36.854420][ T1115]  ? rtnl_link_unregister+0x220/0x220
[   36.854936][ T1115]  ? lock_acquire+0x164/0x3b0
[   36.855376][ T1115]  ? is_bpf_image_address+0xff/0x1d0
[   36.855884][ T1115]  ? rtnl_newlink+0x4c/0x90
[   36.856304][ T1115]  ? kernel_text_address+0x111/0x140
[   36.856857][ T1115]  ? __kernel_text_address+0xe/0x30
[   36.857440][ T1115]  ? unwind_get_return_address+0x5f/0xa0
[   36.858063][ T1115]  ? create_prof_cpu_mask+0x20/0x20
[   36.858644][ T1115]  ? arch_stack_walk+0x83/0xb0
[   36.859171][ T1115]  ? stack_trace_save+0x82/0xb0
[   36.859710][ T1115]  ? stack_trace_consume_entry+0x160/0x160
[   36.860357][ T1115]  ? deactivate_slab.isra.78+0x2c5/0x800
[   36.860928][ T1115]  ? kasan_unpoison_shadow+0x30/0x40
[   36.861520][ T1115]  ? kmem_cache_alloc_trace+0x135/0x350
[   36.862125][ T1115]  ? rtnl_newlink+0x4c/0x90
[   36.864073][ T1115]  rtnl_newlink+0x65/0x90
[ ... ]

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kbuild-fixes-v5.6-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- fix missed rebuild of DT schema check

- add some phony targets to PHONY

- fix comments and documents

* tag 'kbuild-fixes-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: get rid of trailing slash from subdir- example
  kbuild: add dt_binding_check to PHONY in a correct place
  kbuild: add dtbs_check to PHONY
  kbuild: remove unneeded semicolon at the end of cmd_dtb_check
  kbuild: fix DT binding schema rule to detect command line changes
  kbuild: remove wrong documentation about mandatory-y
  kbuild: add comment for V=2 mode

net: phy: marvell: don't interpret PHY status unless resolved

Don't attempt to interpret the PHY specific status register unless
the PHY is indicating that the resolution is valid.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx5: register lag notifier for init network namespace only

The current code causes problems when the unregistering netdevice could
be different then the registering one.

Since the check in mlx5_lag_netdev_event() does not allow any other
network namespace anyway, fix this by registerting the lag notifier
per init network namespace only.

Fixes: d48834f9d4b4 ("mlx5: Use dev_net netdevice notifier registrations")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Aya Levin <ayal@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID subsystem fixes from Jiri Kosina:

- syzkaller-reported error handling fixes in various drivers, from
   various people

- increase of HID report buffer size to 8K, which is apparently needed
   by certain modern devices

- a few new device-ID-specific fixes / quirks

- battery charging status reporting fix in logitech-hidpp, from Filipe
   Laíns

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: hid-bigbenff: fix race condition for scheduled work during removal
  HID: hid-bigbenff: call hid_hw_stop() in case of error
  HID: hid-bigbenff: fix general protection fault caused by double kfree
  HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override
  HID: alps: Fix an error handling path in 'alps_input_configured()'
  HID: hiddev: Fix race in in hiddev_disconnect()
  HID: core: increase HID report buffer size to 8KiB
  HID: core: fix off-by-one memset in hid_report_raw_event()
  HID: apple: Add support for recent firmware on Magic Keyboards
  HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
  HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active

unix: define and set show_fdinfo only if procfs is enabled

Follow the pattern used with other *_show_fdinfo functions and only
define unix_show_fdinfo and set it in proto_ops if CONFIG_PROCFS
is set.

Fixes: 3c32da19a858 ("unix: Show number of pending scm files of receive queue in fdinfo")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hinic-BugFixes'

Luo bin says:

====================
hinic: BugFixes

the bug fixed in patch #2 has been present since the first commit.
the bugs fixed in patch #1 and patch #3 have been present since the
following commits:
patch #1: 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA")
patch #3: 421e9526288b ("hinic: add rss support")
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

hinic: fix a bug of rss configuration

should use real receive queue number to configure hw rss
indirect table rather than maximal queue number

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hinic: fix a bug of setting hw_ioctxt

a reserved field is used to signify prime physical function index
in the latest firmware version, so we must assign a value to it
correctly

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hinic: fix a irq affinity bug

can not use a local variable as an input parameter of
irq_set_affinity_hint

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'docs-5.6-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
"A pair of docs-build fixes"

* tag 'docs-5.6-fixes' of git://git.lwn.net/linux:
docs: Fix empty parallelism argument
docs: remove MPX from the x86 toc

Merge tag 'audit-pr-20200226' of git://git./linux/kernel/git/pcmoore/audit

Pull audit fixes from Paul Moore:
"Two fixes for problems found by syzbot:

   - Moving audit filter structure fields into a union caused some
     problems in the code which populates that filter structure.

     We keep the union (that idea is a good one), but we are fixing the
     code so that it doesn't needlessly set fields in the union and mess
     up the error handling.

   - The audit_receive_msg() function wasn't validating user input as
     well as it should in all cases, we add the necessary checks"

* tag 'audit-pr-20200226' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: always check the netlink payload length in audit_receive_msg()
  audit: fix error handling in audit_data_to_entry()

nvme-pci: Hold cq_poll_lock while completing CQEs

Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.

Fixes: dabcefab45d3 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>

PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers

Some older compilers have no implementation for the helper for 64-bit
unsigned division/modulo, so linking pcie-brcmstb driver causes the
"undefined reference to `__aeabi_uldivmod'" error.

*rc_bar2_size is always a power of two, because it is calculated as:
"1ULL << fls64(entry->res->end - entry->res->start)", so the modulo
operation in the subsequent check can be replaced by a simple logical
AND with a proper mask.

Link: https://lore.kernel.org/r/20200227115146.24515-1-m.szyprowski@samsung.com
Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

io_uring: define and set show_fdinfo only if procfs is enabled

Follow the pattern used with other *_show_fdinfo functions and only
define and use io_uring_show_fdinfo and its helper functions if
CONFIG_PROC_FS is set.

Fixes: 87ce955b24c9 ("io_uring: add ->show_fdinfo() for the io_uring file descriptor")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'devfreq-fixes-for-5.6-rc4' of git://git./linux/kernel/git/chanwoo/linux

Pull a devfreq fix for 5.6-rc4 from Chanwoo Choi:

"Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
- This changes as devfreq(X) cause break some user space applications
such as Android HAL from Unisoc and Hikey. In result, decide to revert it
for preventing the HAL layer problem."

* tag 'devfreq-fixes-for-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"

cpufreq: Fix policy initialization for internal governor drivers

Before commit 1e4f63aecb53 ("cpufreq: Avoid creating excessively
large stack frames") the initial value of the policy field in struct
cpufreq_policy set by the driver's ->init() callback was implicitly
passed from cpufreq_init_policy() to cpufreq_set_policy() if the
default governor was neither "performance" nor "powersave". After
that commit, however, cpufreq_init_policy() must take that case into
consideration explicitly and handle it as appropriate, so make that
happen.

Fixes: 1e4f63aecb53 ("cpufreq: Avoid creating excessively large stack frames")
Link: https://lore.kernel.org/linux-pm/39fb762880c27da110086741315ca8b111d781cd.camel@gmail.com/
Reported-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

net/smc: check for valid ib_client_data

In smc_ib_remove_dev() check if the provided ib device was actually
initialized for SMC before.

Reported-by: syzbot+84484ccebdd4e5451d91@syzkaller.appspotmail.com
Fixes: a4cf0443c414 ("smc: introduce SMC as an IB-client")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix notifier registration

We cannot register the same netdev notifier multiple times when probing
stmmac devices. Register the notifier only once in module init, and also
make debugfs creation/deletion safe against simultaneous notifier call.

Fixes: 481a7d154cbb ("stmmac: debugfs entry name is not be changed when udev rename device name.")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: mscc: fix firmware paths

The firmware paths for the VSC8584 PHYs not not contain the leading
'microchip/' directory, as used in linux-firmware, resulting in an
error when probing the driver. This patch fixes it.

Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: add dummy icsk_sync_mss()

syzbot noted that the master MPTCP socket lacks the icsk_sync_mss
callback, and was able to trigger a null pointer dereference:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8e171067 P4D 8e171067 PUD 93fa2067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8984 Comm: syz-executor066 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:0x0
Code: Bad RIP value.
RSP: 0018:ffffc900020b7b80 EFLAGS: 00010246
RAX: 1ffff110124ba600 RBX: 0000000000000000 RCX: ffff88809fefa600
RDX: ffff8880994cdb18 RSI: 0000000000000000 RDI: ffff8880925d3140
RBP: ffffc900020b7bd8 R08: ffffffff870225be R09: fffffbfff140652a
R10: fffffbfff140652a R11: 0000000000000000 R12: ffff8880925d35d0
R13: ffff8880925d3140 R14: dffffc0000000000 R15: 1ffff110124ba6ba
FS: 0000000001a0b880(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000000a6d6f000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
cipso_v4_sock_setattr+0x34b/0x470 net/ipv4/cipso_ipv4.c:1888
netlbl_sock_setattr+0x2a7/0x310 net/netlabel/netlabel_kapi.c:989
smack_netlabel security/smack/smack_lsm.c:2425 [inline]
smack_inode_setsecurity+0x3da/0x4a0 security/smack/smack_lsm.c:2716
security_inode_setsecurity+0xb2/0x140 security/security.c:1364
__vfs_setxattr_noperm+0x16f/0x3e0 fs/xattr.c:197
vfs_setxattr fs/xattr.c:224 [inline]
setxattr+0x335/0x430 fs/xattr.c:451
__do_sys_fsetxattr fs/xattr.c:506 [inline]
__se_sys_fsetxattr+0x130/0x1b0 fs/xattr.c:495
__x64_sys_fsetxattr+0xbf/0xd0 fs/xattr.c:495
do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440199
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffcadc19e48 EFLAGS: 00000246 ORIG_RAX: 00000000000000be
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440199
RDX: 0000000020000200 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000003 R09: 00000000004002c8
R10: 0000000000000009 R11: 0000000000000246 R12: 0000000000401a20
R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
CR2: 0000000000000000

Address the issue adding a dummy icsk_sync_mss callback.
To properly sync the subflows mss and options list we need some
additional infrastructure, which will land to net-next.

Reported-by: syzbot+f4dfece964792d80b139@syzkaller.appspotmail.com
Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: corrected the return value for genphy_check_and_restart_aneg and genphy_c45_check_and_restart_aneg

When auto-negotiation is not required, return value should be zero.

Changes v1->v2:
- improved comments and code as Andrew Lunn and Heiner Kallweit suggestion
- fixed issue in genphy_c45_check_and_restart_aneg as Russell King
suggestion.

Fixes: 2a10ab043ac5 ("net: phy: add genphy_check_and_restart_aneg()")
Fixes: 1af9f16840e9 ("net: phy: add genphy_c45_check_and_restart_aneg()")
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

slip: not call free_netdev before rtnl_unlock in slip_open

As the description before netdev_run_todo, we cannot call free_netdev
before rtnl_unlock, fix it by reorder the code.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: restrict IPV6_ADDRFORM operation

IPV6_ADDRFORM is able to transform IPv6 socket to IPv4 one.
While this operation sounds illogical, we have to support it.

One of the things it does for TCP socket is to switch sk->sk_prot
to tcp_prot.

We now have other layers playing with sk->sk_prot, so we should make
sure to not interfere with them.

This patch makes sure sk_prot is the default pointer for TCP IPv6 socket.

syzbot reported :
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD a0113067 P4D a0113067 PUD a8771067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 10686 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:0x0
Code: Bad RIP value.
RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246
RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40
RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5
R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098
R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000
FS:  00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
inet_release+0x165/0x1c0 net/ipv4/af_inet.c:427
__sock_release net/socket.c:605 [inline]
sock_close+0xe1/0x260 net/socket.c:1283
__fput+0x2e4/0x740 fs/file_table.c:280
____fput+0x15/0x20 fs/file_table.c:313
task_work_run+0x176/0x1b0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:164 [inline]
prepare_exit_to_usermode+0x480/0x5b0 arch/x86/entry/common.c:195
syscall_return_slowpath+0x113/0x4a0 arch/x86/entry/common.c:278
do_syscall_64+0x11f/0x1c0 arch/x86/entry/common.c:304
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45c429
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f2ae75dac78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: 0000000000000000 RBX: 00007f2ae75db6d4 RCX: 000000000045c429
RDX: 0000000000000001 RSI: 000000000000011a RDI: 0000000000000004
RBP: 000000000076bf20 R08: 0000000000000038 R09: 0000000000000000
R10: 0000000020000180 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000a9d R14: 00000000004ccfb4 R15: 000000000076bf2c
Modules linked in:
CR2: 0000000000000000
---[ end trace 82567b5207e87bae ]---
RIP: 0010:0x0
Code: Bad RIP value.
RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246
RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40
RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5
R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098
R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000
FS:  00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+1938db17e275e85dc328@syzkaller.appspotmail.com
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: fix cleanup for linkgroup setup failures

If an SMC connection to a certain peer is setup the first time,
a new linkgroup is created. In case of setup failures, such a
linkgroup is unusable and should disappear. As a first step the
linkgroup is removed from the linkgroup list in smc_lgr_forget().

There are 2 problems:
smc_listen_decline() might be called before linkgroup creation
resulting in a crash due to calling smc_lgr_forget() with
parameter NULL.
If a setup failure occurs after linkgroup creation, the connection
is never unregistered from the linkgroup, preventing linkgroup
freeing.

This patch introduces an enhanced smc_lgr_cleanup_early() function
which
* contains a linkgroup check for early smc_listen_decline()
invocations
* invokes smc_conn_free() to guarantee unregistering of the
connection.
* schedules fast linkgroup removal of the unusable linkgroup

And the unused function smcd_conn_free() is removed from smc_core.h.

Fixes: 3b2dec2603d5b ("net/smc: restructure client and server code in af_smc")
Fixes: 2a0674fffb6bc ("net/smc: improve abnormal termination of link groups")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed

Outdated Raspberry Pi 4 firmware might configure the external PHY as
rgmii although the kernel currently sets it as rgmii-rxid. This makes
connections unreliable as ID_MODE_DIS is left enabled. To avoid this,
explicitly clear that bit whenever we don't need it.

Fixes: da38802211cc ("net: bcmgenet: Add RGMII_RXID support")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sched: act: count in the size of action flags bitfield

The put of the flags was added by the commit referenced in fixes tag,
however the size of the message was not extended accordingly.

Fix this by adding size of the flags bitfield to the message size.

Fixes: e38226786022 ("net: sched: update action implementations to support flags")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

kbuild: get rid of trailing slash from subdir- example

obj-* needs a trailing slash for a directory, but subdir-* does not.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

net: core: devlink.c: Use built-in RCU list checking

list_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to list_for_each_entry_rcu() to silence
false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled.

The devlink->lock is held when devlink_dpipe_table_find()
is called in non RCU read side section. Therefore, pass struct devlink
to devlink_dpipe_table_find() for lockdep checking.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>