drm/komeda: Remove layer_split property

Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.

Again this probably needs multiple pieces to solve this properly:

- Instead of expecting userspace to compute this (and duplicating
  modeset code), the kernel driver should compute when it's necessary
  to enable layer_split mode to make a configuration possible. I.e. in
  komeda_plane_atomic_check() first try komeda_build_layer_data_flow()
  and if that fails, try komeda_build_layer_split_data_flow(), and set
  dflow.en_split accordingly. Assuming I understand somewhat correctly
  what this does.

- If this is needed for validation then you want a debugfs file to
  force this one way or the other, or alternatively  use
  ->atomic_print_state to dump such hidden driver-private state.
  Depends upon how you do your validation ofc.

Fixes: a407a6509393 ("drm/komeda: Add layer split support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-4-daniel.vetter@ffwll.ch

drm/komeda: remove img_enhancement property

Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.

Again this probably needs multiple pieces to solve this properly:

- Instead of expecting userspace to compute this (and duplicating
  modeset code), the kernel driver should compute when it's possible
  to enable this better up/downscale mode (assuming I understood
  Liviu correctly on what this does) automatically.

- If this is needed for validation then you want a debugfs file to
  force this one way or the other, or alternatively  use
  ->atomic_print_state to dump such hidden driver-private state.
  Depends upon how you do your validation ofc.

Fixes: 42b6f118f6d1 ("drm/komeda: Add image enhancement support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-3-daniel.vetter@ffwll.ch

drm/komeda: remove slave_planes property

Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.

Again this probably needs multiple pieces to solve this properly:

- To make plane configuration less surprising to userspace you
  propably need to virtualize planes, and reorder which logical plane
  you map to which physical one dynamically. Instead of exposing a
  komeda-specific limitation to userspace and expecting them to dtrt.
  I think msm and rcar-du do that already (and others), if you need
  people to chat with or example code.

- If this is needed for validation, again ->atomic_print_state and the
  infrastructure around that is your friend.

Fixes: 3b9dfa4ef28c ("drm/komeda: Add slave pipeline support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-2-daniel.vetter@ffwll.ch

drm/komeda: Remove clock ratio property

Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.

From the discussion with Liviu the solution for these here needs
multiple pieces:

- For being able to reliably read the memory clock we need a DT
  property, plus maybe DT override snippets to fix it if it's wrong.

- For exposing plane limitations to userspace there's TEST_ONLY. There
  is a bit a gap in telling userspace better that scaling doesn't work
  due to limits (atm a good strategy is to retry again without scaling
  when adding a plane didn't work the first time around). But that
  needs a more generic solution, not exposing something extremely
  komeda specific.

- If this is needed by validation tools, you can still expose it in
  debugfs. We have an entire nice infrastructure for debug printing of
  kms objects already, see the various atomic_print_state callbacks
  and infrastructure around them.

Fixes: 1f7f9ab7900e ("drm/komeda: Add engine clock requirement check for the downscaling")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-1-daniel.vetter@ffwll.ch

drm: connector: remove bogus NULL check

mode->name is a character array in a structure, checking it's
address is pointless and causes a warning with some compilers:

drivers/gpu/drm/drm_connector.c:144:15: error: address of array 'mode->name' will always evaluate to 'true'
      [-Werror,-Wpointer-bool-conversion]
                      mode->name ? mode->name : "",
                      ~~~~~~^~~~ ~
include/drm/drm_print.h:366:29: note: expanded from macro 'DRM_DEBUG_KMS'
        drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__)
                                   ^~~~~~~~~~~

Remove the check here.

Fixes: 3aeeb13d8996 ("drm/modes: Support modes names on the command line")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ramalingam C <ramlaingam.c@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628103925.2686249-1-arnd@arndb.de

drm: panel-orientation-quirks: Add extra quirk table entry for GPD MicroPC

Newer GPD MicroPC BIOS versions have proper DMI strings, add an extra quirk
table entry for these new strings. This is good news, as this means that we
no longer have to update the BIOS dates list with every BIOS update.

Fixes: 652b8b086538("drm: panel-orientation-quirks: Add quirk for GPD MicroPC")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624154014.8557-2-hdegoede@redhat.com

drm/selftests: reduce stack usage

Putting a large drm_connector object on the stack can lead to warnings
in some configuration, such as:

drivers/gpu/drm/selftests/test-drm_cmdline_parser.c:18:12: error: stack frame size of 1040 bytes in function 'drm_cmdline_test_res' [-Werror,-Wframe-larger-than=]
static int drm_cmdline_test_res(void *ignored)

Since the object is never modified, just declare it as 'static const'
and allow this to be passed down.

Fixes: b7ced38916a9 ("drm/selftests: Add command line parser selftests")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628121712.1928142-1-arnd@arndb.de

drm/bochs: fix framebuffer setup.

The driver doesn't consider framebuffer pitch and offset, leading to a
wrong display in case offset != 0 or pitch != width * bpp.  Fix it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190627081206.23135-1-kraxel@redhat.com

Merge tag 'topic/remove-fbcon-notifiers-2019-06-26' into drm-misc-next-fixes

topic/remove-fbcon-notifiers:
- Export fbcon_update_vcs to fix sh_mobile_lcdcfb.c compilation.
- Rely on fbcon being builtin when vgaswitcheroo is builtin.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7dd06ccb-7f8d-943b-bbc0-f4e58e041a23@linux.intel.com

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next-fixes

Some fixes have been accidentally pushed to this, so I cannot fost-forward.
Required to pull in the remove-fbcon-notifiers fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

vga_switcheroo: Depend upon fbcon being built-in, if enabled

Fixes linking fail when fbcon/fbdev is modular and vgaswitcheroo is
enabled:

x86_64-linux-gnu-ld: drivers/gpu/vga/vga_switcheroo.o: in function `vga_switchto_stage2':
vga_switcheroo.c:(.text+0x997): undefined reference to `fbcon_remap_all'

Unfortunately this means that in a default allmodconfig we will disable vgaswitcheroo.

v2: I first tried to fix this with an EXPORT_SYMBOL, but vga_switcheroo is
never a module, so this doesn't work.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 1cd51b5d200d ("vgaswitcheroo: call fbcon_remap_all directly")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624092153.23375-1-daniel.vetter@ffwll.ch

drm/edid: use for_each_displayid_db where applicable

Replace the duplicated versions of the while loop with the new macro.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619183033.6922-1-andresx7@gmail.com

drm/edid: parse CEA blocks embedded in DisplayID

DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.

This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.

This change fixes audio support for the Valve Index HMD.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com

Merge tag 'drm/tegra/for-5.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v5.3-rc1

This contains a couple of small improvements and cleanups for the Tegra
DRM driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621150753.19550-1-thierry.reding@gmail.com

Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621095349.GI17204@e110455-lin.cambridge.arm.com

drm/komeda: Make Komeda interrupts shareable

Komeda interrupts may be shared with other hardware blocks.
One needs to use devm_request_irq() with IRQF_SHARED to create a shared
 interrupt handler.
As a result of not using drm_irq_install() api, one needs to set
"(struct drm_device *)->irq_enabled = true/false" to enable/disable
vblank interrupts.

Changes from v1:-
1. Squashed the following two patches into one (as the second patch is a
consequence of the first one):-
   drm/komeda: Avoid using DRIVER_IRQ_SHARED
   drm/komeda: Enable/Disable vblank interrupts
2. Fixed the commit message (as pointed by Daniel Vetter)
3. Removed calls to 'drm_irq_uninstall()' as we are no longer using
drm_irq_install()
4. Removed the struct member 'komeda_kms_driver.irq_handler' as it is not
used anywhere.

Signed-off-by: Ayan Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

drm/komeda: fix 32-bit komeda_crtc_update_clock_ratio

clang points out a bug in the clock calculation on 32-bit, that leads
to the clock_ratio always being zero:

drivers/gpu/drm/arm/display/komeda/komeda_crtc.c:31:36: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
        aclk = komeda_calc_aclk(kcrtc_st) << 32;

Move the shift into the division to make it apply on a 64-bit
variable. Also use the more expensive div64_u64() instead of div_u64()
to account for pxlclk being a 64-bit integer.

Fixes: 1f7f9ab7900e ("drm/komeda: Add engine clock requirement check for the downscaling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

Merge tag 'drm-intel-next-2019-06-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Features:
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)

Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)

Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v9x1lpdh.fsf@intel.com

Merge tag 'drm-misc-next-2019-06-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.3:

UAPI Changes:
- Give each dma-buf their own inode, add DMA_BUF_SET_NAME ioctl and a show_fdinfo handler.

Cross-subsystem Changes:
- Pull in the topic/remove-fbcon-notifiers branch:
  * remove fbdev notifier usage for fbcon, as prep work to clean up the fbcon locking
  * assorted locking checks in vt/console code
  * assorted notifier and cleanups in fbdev and backlight code

Core Changes:
- Make drm_debugfs_create_files() never fail.
- add debug print to update_vblank_count.
- Add DP_DPCD_QUIRK_NO_SINK_COUNT quirk.
- Add todo item for drm_gem_objects.
- Unexport drm_gem_(un)pin/v(un)map.
- Document struct drm_cmdline_mode.
- Rewrite the command handler for mode names, and add support to specify
  rotation, reflection and overscan. With a new selftest! :)
- Fixes to drm/client for improving rotation support, and fixing variable scope.
- Small fixes to self refresh helper.

Driver Changes:
- Add rockchip RK3328 support.
- Assorted driver fixes to rockchip, vc4, rcar-du, vkms.
- Expose panfrost performance counters through unstable ioctl's, hidden
  behind a module parameter.
- Enumerate CRC sources list in vkms.
- Add a basic kms driver for the Ingenic JZ47xx SoC, which will be expanded
  soon with more advanced features.
- Suspend/resume fix for stm.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18e22ec1-adf3-3a75-34a3-9fe09a91eef5@linux.intel.com

Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next

- The coherent memory changes including mm changes.
- Some vmwgfx debug fixes.
- Removal of vmwgfx legacy security checks.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <VMware> <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619072531.4026-1-thomas@shipmail.org

drm/todo: Update drm_gem_object_funcs todo even more

I rushed merging this a bit too much, and Noralf pointed out that
we're a lot better already and have made great progress.

Let's try again.

v2: Fix typo spotted by Eric Engestrom.

Fixes: 8db420ac6cf2 ("drm/todo: Improve drm_gem_object funcs todo")
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618140241.19856-1-daniel.vetter@ffwll.ch

drm/stm: drv: fix suspend/resume

Without this fix, the system can not go in "suspend" mode
due to an error in drv_suspend function.

Fixes: 35ab6cfbf211 ("drm/stm: support runtime power management")

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1560755897-5002-1-git-send-email-yannick.fertre@st.com

drm/self_refresh: Fix possible NULL deref in failure path

If state allocation fails, we still try to give back the reference on
it. Also initialize ret in case the crtc is not enabled and we hit the
eject button.

Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619181951.192305-1-sean@poorly.run

drm/komeda: Correct printk format specifier for "size_t"

Warnings popup when "make ARCH=i386"

In file included from include/drm/drm_mm.h:49,
                 from include/drm/drm_vma_manager.h:26,
                 from include/drm/drm_gem.h:40,
                 from drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:9:
drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c: In function 'komeda_fb_afbc_size_check':
drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:96:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
   DRM_DEBUG_KMS("afbc size check failed, obj_size: 0x%lx. min_size 0x%x.\n",

That leads by misuse "%lx" as format speicifier for size_t, correct it
to "%zx"

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

malidp: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

komeda: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm: self_refresh: Fix a reversed condition in drm_self_refresh_helper_cleanup()

This test is flipped around so it either leads to a memory leak or a
NULL dereference.

Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619100141.GA28596@mwanda

drm/i915: Update DRIVER_DATE to 20190619

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Stop passing I915_WAIT_LOCKED to i915_request_wait()

Since commit eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on
struct_mutex"), the I915_WAIT_LOCKED flags passed to i915_request_wait()
has been defunct. Now go ahead and remove it from all callers.

References: eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-3-chris@chris-wilson.co.uk

DRM: Add KMS driver for the Ingenic JZ47xx SoCs

Add a KMS driver for the Ingenic JZ47xx family of SoCs.
This driver is meant to replace the aging jz4740-fb driver.

This driver does not make use of the simple pipe helper, for the reason
that it will soon be updated to support more advanced features like
multiple planes, IPU integration for colorspace conversion and up/down
scaling, support for DSI displays, and TV-out and HDMI outputs.

Notes:
    v2: - Remove custom handling of panel. The panel is now discovered using
          the standard API.
        - Lots of small tweaks suggested by upstream

    v3: - Use devm_drm_dev_init()
        - Update compatible strings to -lcd instead of -drm
        - Add destroy() callbacks to plane and crtc
        - The ingenic,lcd-mode is now read from the bridge's DT node

    v4: Remove ingenic,lcd-mode property completely. The various modes are now
        deduced from the connector type, the pixel format or the bus flags.

    v5: - Fix framebuffer size incorrectly calculated for 24bpp framebuffers
        - Use 32bpp framebuffer instead of 16bpp, as it'll work with both
          16-bit and 24-bit panel
        - Get rid of drm_format_plane_cpp() which has been dropped upstream
        - Avoid using drm_format_info->depth, which is deprecated.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152331.23160-2-paul@crapouillou.net

dt-bindings: Add doc for the Ingenic JZ47xx LCD controller driver

Add documentation for the devicetree bindings of the LCD controller
present in the JZ47xx family of SoCs from Ingenic.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152331.23160-1-paul@crapouillou.net

drm/i915/execlists: Detect cross-contamination with GuC

The process_csb routine from execlists_submission is incompatible with
the GuC backend. Add a warning to detect if we accidentally end up in
the wrong spot.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618110736.31155-1-chris@chris-wilson.co.uk

drm/i915: Make the semaphore saturation mask global

The idea behind keeping the saturation mask local to a context backfired
spectacularly. The premise with the local mask was that we would be more
proactive in attempting to use semaphores after each time the context
idled, and that all new contexts would attempt to use semaphores
ignoring the current state of the system. This turns out to be horribly
optimistic. If the system state is still oversaturated and the existing
workloads have all stopped using semaphores, the new workloads would
attempt to use semaphores and be deprioritised behind real work. The
new contexts would not switch off using semaphores until their initial
batch of low priority work had completed. Given sufficient backload load
of equal user priority, this would completely starve the new work of any
GPU time.

To compensate, remove the local tracking in favour of keeping it as
global state on the engine -- once the system is saturated and
semaphores are disabled, everyone stops attempting to use semaphores
until the system is idle again. One of the reason for preferring local
context tracking was that it worked with virtual engines, so for
switching to global state we could either do a complete check of all the
virtual siblings or simply disable semaphores for those requests. This
takes the simpler approach of disabling semaphores on virtual engines.

The downside is that the decision that the engine is saturated is a
local measure -- we are only checking whether or not this context was
scheduled in a timely fashion, it may be legitimately delayed due to user
priorities. We still have the same dilemma though, that we do not want
to employ the semaphore poll unless it will be used.

v2: Explain why we need to assume the worst wrt virtual engines.

Fixes: ca6e56f654e7 ("drm/i915: Disable semaphore busywaits on saturated systems")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-8-chris@chris-wilson.co.uk

drm/komeda: Enable writeback split support

Writeback split is also for workaround the size limitation of d71 scaler.
Like layer_split, writeback downscaling also can use two scalers to handle
the scaling half-by-half. The only differnence is writback needs a
standalone component (splitter)'s help to split the composition result.
The data pipeline of writeback split as below:

                   /-> scaler-0 ->\
 compiz -> splitter                merger -> wb_layer -> memory
                   \-> scaler-1 ->/

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

drm/komeda: Add new component komeda_splitter

Similar to Layer Split, but Splitter is used for writeback, which splits
the compiz result to two half parts and then feed them to two scalers.

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

drm/komeda: Accept null writeback configurations for writeback

User may send null writeback configurations for writeback connector like:
- Only bind the writeback connector to crtc.
- set a fb_id(0) to writeback_fb_id_property
All above configurations are meaningless for writeback, but since they are
still valid configurations, accept them.

Depends on:
- https://patchwork.freedesktop.org/series/60856/

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

drm/komeda: Refine function to_d71_input_id

Since the component_state->input[i] is only valid when it is active, the
content of input[i] is undefined if it is inactive. The user must check the
state->active_inputs with input index firstly before using state->input[i].
Refine the function to_d71_input_id and directly move such check into it.
Simplify the using and avoid problem that caller forget the valid check.

Depends on:
- https://patchwork.freedesktop.org/series/60856/

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

drm/komeda: Add slave pipeline support

One crtc can use two komeda_pipeline, and one works as master and as
slave. the slave pipeline doesn't have its own output and timing
ctrlr, but pre-composite the input layer data flow and then feed the
result to master. the pipeline configuration like:

slave-layer-0 \
...            slave->CU
slave-layer-4 /         \
                        \
master-layer-0 --------> master->CU -> ...
 ...                  /
master-layer-4 ------>

Since komeda Compiz doesn't output alpha, so the slave->CU result
only can be used as bottom input when blend it with master input data
flows.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add layer split support

Komeda supports two types of layer split:
- none-scaling split
- scaling split
Since D71 merger only support scaler as input, so for none-scaling split,
the two layer dflow will be output to compiz directly. for scaling_split,
the data flow will be merged by merger firstly, then output the merged
data flow to compiz.

Komeda handles the split in kernel completely to hide the detailed and
complicated split calcualtion to user mode, for user only need to set the
layer_split property to enable/disable it.

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add split support for scaler

To achieve same caling effect compare with none split, the texel
calculation need to use the same scaling ratio before split, so add
"total_xxx" to pipeline to describe the hsize/vsize before split.
Update pipeline and d71_scaler_update accordingly.

v2: Rebase and addressed Liviu's comments

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add component komeda_merger

Introduce a new component komeda_merger, because D71 HW supports to split
a whole image to two half parts and does the scaling independently. Merger
merges two separate results to one, and output it to compositor or wb_layer
For this patch:
- Add the definition of komeda_merger/merger_state
- Report and initialize komeda_merger according to the D71 HW.

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

dt/bindings: drm/komeda: Unify mclk/pclk/pipeline->aclk to one ACLK

Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.

But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1

So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Rename main engine clk name "mclk" to "aclk"

To avoid confusion, unify the driver main engine clk name "mclk" to
the spec name "aclk".

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Unify mclk/pclk/pipeline->aclk to one MCLK

Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.

But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1

So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.
drop pclk/pipeline->axiclk. but only keep one mclk in komeda driver.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Adds zorder support

- Creates the zpos property.
- Implement komeda_crtc_normalize_zpos to replace
drm_atomic_normalize_zpos, reasons as the following:

1. The drm_atomic_normalize_zpos allows to configure same zpos for
different planes, but komeda doesn't support such configuration.
2. For further slave pipline case, Komeda need to calculate the
max_slave_zorder, we will merge such calculation into
komed_crtc_normalize_zpos to save a separated plane_state loop.
3. For feature none-scaling layer_split, which a plane_state will be
assigned to two individual layers(left/right), which requires two
normalize_zpos for this plane, plane_st->normalize_zpos will be used
by left layer, normalize_zpos + 1 for right_layer.

This patch series depends on:
- https://patchwork.freedesktop.org/series/58710/
- https://patchwork.freedesktop.org/series/59000/
- https://patchwork.freedesktop.org/series/59002/
- https://patchwork.freedesktop.org/series/59747/
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/60083/
- https://patchwork.freedesktop.org/series/60698/

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add format support for Y0L2, P010, YUV420_8/10BIT

- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to
compatible with such block format.
- Since DRM introduced a general block information to drm_format_info,
  the format_caps->tiled_size no long needed, delete it.
- Build some fb utils functions for code sharing.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add komeda_fb_check_src_coords

Add komeda_fb_check_src_coords and check if the layer configured src
rect can meet the requirement of fb and fb format.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

dt/bindings: drm/komeda: Adds SMMU support for D71 devicetree

Updates the device-tree doc about how to enable SMMU by devicetree.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Adds SMMU support

Adds iommu_connect and disconnect for SMMU support, and configures
TBU translation once SMMU has been attached to the display device.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
[fixed checking of error code returned by dp_wait_cond() and removed
extraneous DRM_ERROR() calls]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Enable color-encoding (YUV format) support

Adds color-encoding properties if layer can support YUV format.
Updates HW YUV-RGB matrix state according to the color-encoding
properties.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Update HW up-sampling on D71

Updates HW up-sampling method according to the format type.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Adds limitation check for AFBC wide block not support Rot90

Komeda series hardware doesn't support Rot90 for AFBC wide block. So
add limitation check to reject it if such configuration has been posted.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add rotation support on Komeda driver

- Adds rotation property to plane.
- Komeda display rotation support diverges from the specific formats,
so need to check the user required rotation type with the format caps
and reject the commit if it can not be supported.
- In the layer validate flow, sets the rotation value to the layer
state. If r90 or r270, swap the width and height of the data flow
for next stage.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Clear enable bit in CU_INPUTx_CONTROL

Besides clearing the input ID to zero, D71 compiz also has input
enable bit in CU_INPUTx_CONTROL which need to be cleared.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

arm/komeda: Convert dp_wait_cond() to return an error code.

dp_wait_cond() currently returns the number of retries left over which
is hardly an useful information. Convert to returning -ETIMEDOUT when
the wait times out, or 0 (zero) when condition is met before deadline.

Also convert the users of the function to return the error value.

Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>

drm/komeda: Creates plane alpha and blend mode properties

Creates plane alpha and blend mode properties attached to plane.

This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/58665/
- https://patchwork.freedesktop.org/series/59000/
- https://patchwork.freedesktop.org/series/59002/
- https://patchwork.freedesktop.org/series/59471/

Changes since v1:
- Adds patch denpendency in the comment

Changes since v2:
- Remove [RFC] from the subject

Changes since v3:
- Rebase the code

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add image enhancement support

Besides scaling, Arm display scaler also can support image enhancement.
For support it, Add a new property "img_enhancement" to plane, then user
can turn on/off it by this property, and kernel follow user's requirement
to maitain the state and enable/disable the real HW image enhancement.

v2: Rebase and rename "needs_img_enhancement" to "en_img_enhancement"

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add engine clock requirement check for the downscaling

For downscaling there is a restriction, the downscaling needed engine
clock can not acceed the real engine clock, and the clock requirement
mostly depend on the specific HW, to solve this problem:
1. Add a pipeline func - downscaling_clk_check for CORE to query the real
   HW if downscaling can be supported.
2. Add new property clock ratio which is the ratio of:
     (mclk << 32) / pxlclk
   then User driver can use this ratio to do the clock check to avoid post
   an invalid downscaling to kernel.

v2: Rebase and Delete debug print

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add writeback scaling support

1. Add scaler to writeback pipeline to enable the writeback scaling support
2. Display HW can not do upscaling for writeback, check it when validate.

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Implement D71 scaler support

1. Add scaler component and initialize it according to D71 HW.
2. Implement d71_scaler_update/disable/dump

v2:
- Correct a typo
- Constify component_funcs: d71_scaler_funcs

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add the initial scaler support for CORE

This patch add the initial and necessary logic for CORE to support scaler:
- Complete the struct komeda_scaler and komeda_scaler_state for adding
  the scaler specific features and capablities.
- Implement komeda_scaler_validate to check the scaler with the data flow
  configurations.
- Enable scaling support for plane input path (layer input data flow).

v2: Fix a typo, and rename "needs_scaling" to "en_scaling"

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Attach scaler to drm as private object

According to the komeda pipeline configuration, attach scaler to drm as
private object.

v2: Rebase

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Added AFBC support for komeda driver

For supporting AFBC:
1. Check if the user requested modifier can be supported by display HW.
2. Check the obj->size with AFBC's requirement.
3. Configure HW according to the modifier (afbc features)

This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/59000/

v2: Rebase and addressed Ayan's comments

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/komeda: Add writeback support

Komeda driver uses a individual component to describe the HW's writeback
caps, but drivers doesn't define a new structure and still uses the
existing "struct komeda_layer" to describe this new component.
The detailed changes as follow:

1. Initialize wb_layer according to HW and report it to CORE.
2. CORE exposes wb_layer as a resource to KMS by private_obj.
3. Report writeback supporting by add a wb_connector to KMS, and then
   wb_connector will take act as a component resources user,
   so the func komeda_wb_encoder_atomic_check claims komeda resources
   (scaler and wb_layer) accroding to its state configuration to the
   wb_connector. and the wb_state configuration will be validated on the
   specific component resources to see if the caps of component can
   meet the requirement of wb_connector. if not check failed.
4. Update irq_handler to notify the completion of writeback.

NOTE:
This change doesn't add scaling writeback support, that support will
be added in the future after the scaler support.

v2: Rebase
v3: Rebase and constify the d71_wb_layer_funcs
v4: Addressed Ayan's comments

Depends on:
- https://patchwork.freedesktop.org/series/59915/

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Merge branch 'topic/remove-fbcon-notifiers' into drm-misc-next

topic/remove-fbcon-notifiers:
- remove fbdev notifier usage for fbcon, as prep work to clean up the fbcon locking
- assorted locking checks in vt/console code
- assorted notifier and cleanups in fbdev and backlight code

This is the pull request that was sent out, plus the compile fix for
sh4 reported by kbuild.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

remove-fbcon-notifiers topic branch is based on rc4, so we need a fresh
backmerge of drm-next to pull it in.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/vc4: hdmi: Set default state margin at reset

Now that the TV margins are properly parsed and filled into
drm_cmdline_mode, we just need to initialise the first state at reset to
get those values and start using them.

Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44e24172e300be6a41578517021ef6a6e90ed682.1560783090.git-series.maxime.ripard@bootlin.com

drm/selftests: Add command line parser selftests

The command line parser is pretty tough to get right and very error prone,
so let's add a selftest to try to catch any regression.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/735348d3a475ce0bcc88b46e093ab149023bb202.1560783090.git-series.maxime.ripard@bootlin.com

drm/atomic: Add a function to reset connector TV properties

During the connector reset, if that connector has a TV property, it needs
to be reset to the value provided on the command line.

Provide a helper to do that.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84a7b657f09303a2850e1cc79e68f623547f3fdd.1560783090.git-series.maxime.ripard@bootlin.com

drm/modes: Parse overscan properties

Properly configuring the overscan properties might be needed for the
initial setup of the framebuffer for display that still have overscan.
Let's allow for more properties on the kernel command line to setup each
margin.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e481f1628e3768ca49226ec2115cfa4dfcbd5e4c.1560783090.git-series.maxime.ripard@bootlin.com

drm/connector: Introduce a TV margins structure

The TV margins has been defined as a structure inside the
drm_connector_state structure so far. However, we will need it in other
structures as well, so let's move that structure definition so that it can
be reused.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/38b773b03f15ec7a135cdf8f7db669e5ada20cf2.1560783090.git-series.maxime.ripard@bootlin.com

drm/modes: Allow to specify rotation and reflection on the commandline

Rotations and reflections setup are needed in some scenarios to initialise
properly the initial framebuffer. Some drivers already had a bunch of
quirks to deal with this, such as either a private kernel command line
parameter (omapdss) or on the device tree (various panels).

In order to accomodate this, let's create a video mode parameter to deal
with the rotation and reflexion.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com

drm/modes: Support modes names on the command line

The drm subsystem also uses the video= kernel parameter, and in the
documentation refers to the fbdev documentation for that parameter.

However, that documentation also says that instead of giving the mode using
its resolution we can also give a name. However, DRM doesn't handle that
case at the moment. Even though in most case it shouldn't make any
difference, it might be useful for analog modes, where different standards
might have the same resolution, but still have a few different parameters
that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example).

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18443e0c3bdbbd16cea4ec63bc7f2079b820b43b.1560783090.git-series.maxime.ripard@bootlin.com

drm/modes: Rewrite the command line parser

Rewrite the command line parser in order to get away from the state machine
parsing the video mode lines.

Hopefully, this will allow to extend it more easily to support named modes
and / or properties set directly on the command line.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e32cd4009153b184103554009135c7bf7c9975d7.1560783090.git-series.maxime.ripard@bootlin.com

drm/client: Change drm_client_panel_rotation name

The drm_client_panel_rotation function has been used so far to set the
default rotation based on the panel orientation.

However, we can have more sources of information to make that decision,
starting with the command line that we will introduce later in this series.

Change the name to remove the panel mention.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8cb0f0d9569d41685bbf30a1538da6578cd2769b.1560783090.git-series.maxime.ripard@bootlin.com

drm/client: Restrict the rotation check to the rotation itself

The drm_client_rotation has a check on the rotation value, but the
reflections are also stored in the same variable, and the check doesn't
take this into account.

Therefore, even though we might have a valid rotation, if we're also using
a reflection parameter, the test will fail for no particular reason.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf4de0cdef20aac6c654b7b73c2ab3e317c46803.1560783090.git-series.maxime.ripard@bootlin.com

drm/client: Restrict the plane_state scope

The drm_client_modeset_commit_atomic function uses two times the
plane_state variable in inner blocks of code, but the variable has a scope
global to this function.

This will lead to inadvertent devs to reuse the variable in the second
block with the value left by the first, without any warning from the
compiler since value would have been initialized.

Fix this by moving the variable declaration to the proper scope.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8bd9696ea915a4ad08be6d93a4d9565e8d6aa2f3.1560783090.git-series.maxime.ripard@bootlin.com

drm/connector: Add documentation for drm_cmdline_mode

The struct drm_cmdline_mode holds the result of the command line parsers.
However, it wasn't documented so far, so let's do that.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/963c893c16c6a25fc469b53c726f493d99bdc578.1560783090.git-series.maxime.ripard@bootlin.com

Merge v5.2-rc5 into drm-next

Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

fbcon: Export fbcon_update_vcs

I failed to spot this while compile-testing. Oops.

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 9e1467002630 ("fbcon: replace FB_EVENT_MODE_CHANGE/_ALL with direct calls")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619081115.27921-1-daniel.vetter@ffwll.ch

drm/vkms: add crc sources list

Other drivers are able to list crc sources when accessing
/sys/kernel/debug/dri/.../crtc-0/crc/control

Even though VKMS now supports only 'auto' mode, it is more consistent to
have the list available to the userspace.

Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613121802.2193-3-oleg.vasilev@intel.com

drm/vkms: Move format arrays to vkms_plane.c

No need to have them multiple times.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-5-daniel.vetter@ffwll.ch

drm: Permit video-buffers writecombine mapping for MIPS

Since commit 4b050ba7a66c ("MIPS: pgtable.h: Implement the
pgprot_writecombine function for MIPS") and commit c4687b15a848 ("MIPS: Fix
definition of pgprot_writecombine()") write-combine vma mapping is
available to be used by kernel subsystems for MIPS. In particular the
uncached accelerated attribute is requested to be set by ioremap_wc()
method and by generic PCI memory pages/ranges mapping methods. The same
is done by the drm_io_prot()/ttm_io_prot() functions in case if
write-combine flag is set for vma's passed for mapping. But for some
reason the pgprot_writecombine() method calling is ifdefed to be a
platform-specific with MIPS system being marked as lacking of one. At the
very least it doesn't reflect the current MIPS platform implementation.
So in order to improve the DRM subsystem performance on MIPS with UCA
mapping enabled, we need to have pgprot_writecombine() called for buffers,
which need store operations being combined. In case if particular MIPS
chip doesn't support the UCA attribute, the mapping will fall back to
noncached.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Vadim V. Vlasov <vadim.vlasov@t-platforms.ru>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423123122.32573-1-fancer.lancer@gmail.com

drm/i915/psr: Force manual PSR exit in older gens

To do frontbuffer tracking we are depending on Display WA #0884 to
exit PSR when there is a frontbuffer modification but according to
user reports a write to CURSURFLIVE do not cause PSR to exit in older
gens so lets force a PSR exit.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110799
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Thomas Rohwer <trohwer85@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617195154.30292-1-jose.souza@intel.com

drm/i915: Don't dereference request if it may have been retired when printing

This has caught me out on countless occasions, when we retrieve a pointer
from the submission/execlists backend, it does not carry a reference to
the context or ring. Those are only pinned while the request is active,
so if we see the request is already completed, it may be in the process
of being retired and those pointers defunct.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110938
Fixes: 3a068721a973 ("drm/i915: Show ring->start for the ELSP context/request queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618161951.28820-2-chris@chris-wilson.co.uk

drm/i915/selftests: Flush live_evict

Be sure to cleanup after live_evict by flushing any residual state off
the GPU using igt_flush_test.

Tvrtko mentioned that it is probably wise to stop repeating this ad hoc
around the tests and implement a live test runner.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618161951.28820-1-chris@chris-wilson.co.uk

drm/i915: Skip shrinking already freed pages

Previously, we wanted to shrink the pages of freed objects before they
were finally RCU collected. However, by removing the struct_mutex
serialisation around the active reference, we need to acquire an extra
reference around the wait. Unfortunately this means that we have to skip
objects that are waiting RCU collection.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110937
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-2-chris@chris-wilson.co.uk

drm/i915: Update workarounds selftest for read only regs

Updates the live_workarounds selftest to handle whitelisted
registers that are flagged as read only.

Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-5-John.C.Harrison@Intel.com

drm/i915: Add whitelist workarounds for ICL

Updated whitelist table for ICL.

v2: Reduce changes to just those required for media driver until
the selftest can be updated to support the new features of the
other entries.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-4-John.C.Harrison@Intel.com

drm/i915: Support whitelist workarounds on all engines

Newer hardware requires setting up whitelists on engines other than
render. So, extend the whitelist code to support all engines.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-3-John.C.Harrison@Intel.com

drm/i915: Support flags in whitlist WAs

Newer hardware adds flags to the whitelist work-around register. These
allow per access direction privileges and ranges.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-2-John.C.Harrison@Intel.com

drm/rcar-du: Fix error check when retrieving crtc state

drm_atomic_get_crtc_state() returns an error pointer when it fails, so
the null check is doing nothing here.

Credit to 0-day/Dan Carpenter for reporting this.

Fixes: 6f3b62781bbd ("drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617181548.124134-1-sean@poorly.run

drm/i915: Drop the _INCOMPLETE for has_infoframe

We have full infoframe readout now so we can replace the
PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_infoframe) with the normal
PIPE_CONF_CHECK_BOOL(has_infoframe).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612130801.2085-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Make pipe_config_err() vs. fastset less confusing

Rename pipe_config_err() to pipe_config_mismatch(), and also print
whether we're doing the fastset check or the sw vs. hw state readout
check. Should make the logs a bit less confusing when they're not
filled with what looks like a real error.

Also rename the 'adjust' variable to 'fastset' to make it clear what
it means.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612130801.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Constify intel_pipe_config_compare()

Now that intel_pipe_config_compare() no longer clobbers the passed
in state we can make both crtc states const. And while at we simplify
the calling convention, and clean up intel_compare_link_m_n() a bit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612130801.2085-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Don't clobber M/N values during fastset check

We're now calling intel_pipe_config_compare(..., true) uncoditionally
which means we're always going clobber the calculated M/N values with
the old values if the fuzzy M/N check passes. That causes problems
because the fuzzy check allows for a huge difference in the values.

I'm actually tempted to just make the M/N checks exact, but that might
prevent fastboot from kicking in when people want it. So for now let's
overwrite the computed values with the old values only if decide to skip
the modeset.

v2: Copy has_drrs along with M/N M2/N2 values

Cc: stable@vger.kernel.org
Cc: Blubberbub@protonmail.com
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Blubberbub@protonmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110782
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110675
Fixes: d19f958db23c ("drm/i915: Enable fastset for non-boot modesets.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612172423.25231-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/panfrost: Expose performance counters through unstable ioctls

Expose performance counters through 2 driver specific ioctls: one to
enable/disable the perfcnt block, and one to dump the counter values.

There are discussions to expose global performance monitors (those
counters that can't be retrieved on a per-job basis) in a consistent
way, but this is likely to take time to settle on something that works
for various HW/users.
The ioctls are marked unstable so we can get rid of them when the time
comes. We initally went for a debugfs-based interface, but this was
making the transition to per-FD address space more complicated (we need
to specify the namespace the GPU has to use when dumping the perf
counters), hence the decision to switch back to driver specific ioctls
which are passed the FD they operate on and thus will have a dedicated
address space attached to them.

Other than that, the implementation is pretty simple: it basically dumps
all counters and copy the values to a userspace buffer. The parsing is
left to userspace which has to know the specific layout that's used
by the GPU (layout differs on a per-revision basis).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-5-boris.brezillon@collabora.com

drm/panfrost: Add an helper to check the GPU generation

All models with an ID >= 0x1000 are Bifrost GPUs for now (might change
with new gens).

Suggested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-4-boris.brezillon@collabora.com

drm/panfrost: Add a module parameter to expose unstable ioctls

We plan to expose performance counters through 2 driver specific
ioctls until there's a solution to expose them in a generic way.
In order to be able to deprecate those ioctls when this new
infrastructure is in place we add an unsafe module parameter that
will keep those ioctls hidden unless it's set to true (which also
has the effect of tainting the kernel).

All unstable ioctl handlers should use panfrost_unstable_ioctl_check()
to check whether they're supposed to handle the request or reject it
with ENOSYS.

Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-3-boris.brezillon@collabora.com

drm/panfrost: Move gpu_{write, read}() macros to panfrost_regs.h

So they can be used from other files.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-2-boris.brezillon@collabora.com