review.tizen.org Git - platform/kernel/linux-starfive.git/log

net: phy: Manual remove LEDs to ensure correct ordering

If the core is left to remove the LEDs via devm_, it is performed too
late, after the PHY driver is removed from the PHY. This results in
dereferencing a NULL pointer when the LED core tries to turn the LED
off before destroying the LED.

Manually unregister the LEDs at a safe point in phy_remove.

Cc: stable@vger.kernel.org
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: fdp: Add MODULE_FIRMWARE macros

The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ieee802154/adf7242: Add MODULE_FIRMWARE macro

The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: use budget for TX completions

When running workloads heavy unbalanced towards TX (high TX, low RX
traffic), sfc driver can retain the CPU during too long times. Although
in many cases this is not enough to be visible, it can affect
performance and system responsiveness.

A way to reproduce it is to use a debug kernel and run some parallel
netperf TX tests. In some systems, this will lead to this message being
logged:
kernel:watchdog: BUG: soft lockup - CPU#12 stuck for 22s!

The reason is that sfc driver doesn't account any NAPI budget for the TX
completion events work. With high-TX/low-RX traffic, this makes that the
CPU is held for long time for NAPI poll.

Documentations says "drivers can process completions for any number of Tx
packets but should only process up to budget number of Rx packets".
However, many drivers do limit the amount of TX completions that they
process in a single NAPI poll.

In the same way, this patch adds a limit for the TX work in sfc. With
the patch applied, the watchdog warning never appears.

Tested with netperf in different combinations: single process / parallel
processes, TCP / UDP and different sizes of UDP messages. Repeated the
tests before and after the patch, without any noticeable difference in
network or CPU performance.

Test hardware:
Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz (4 cores, 2 threads/core)
Solarflare Communications XtremeScale X2522-25G Network Adapter

Fixes: 5227ecccea2d ("sfc: remove tx and MCDI handling from NAPI budget consideration")
Fixes: d19a53721863 ("sfc_ef100: TX path for EF100 NICs")
Reported-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230615084929.10506-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'check-if-fips-mode-is-enabled-when-running-selftests'

Magali Lemes says:

====================
Check if FIPS mode is enabled when running selftests

Some test cases from net/tls, net/fcnal-test and net/vrf-xfrm-tests
that rely on cryptographic functions to work and use non-compliant FIPS
algorithms fail in FIPS mode.

In order to allow these tests to pass in a wider set of kernels,
- for net/tls, skip the test variants that use the ChaCha20-Poly1305
and SM4 algorithms, when FIPS mode is enabled;
- for net/fcnal-test, skip the MD5 tests, when FIPS mode is enabled;
- for net/vrf-xfrm-tests, replace the algorithms that are not
FIPS-compliant with compliant ones.

v1: https://lore.kernel.org/netdev/20230607174302.19542-1-magali.lemes@canonical.com/
v2: https://lore.kernel.org/netdev/20230609164324.497813-1-magali.lemes@canonical.com/
v3: https://lore.kernel.org/netdev/20230612125107.73795-1-magali.lemes@canonical.com/
====================

Link: https://lore.kernel.org/r/20230613123222.631897-1-magali.lemes@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: fcnal-test: check if FIPS mode is enabled

There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.

Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: vrf-xfrm-tests: change authentication and encryption algos

The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.

Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: tls: check if FIPS mode is enabled

TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not
FIPS compliant. When fips=1, this set of tests fails. Add a check and only
run these tests if not in FIPS mode.

Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/harness: allow tests to be skipped during setup

Before executing each test from a fixture, FIXTURE_SETUP is run once.
When SKIP is used in FIXTURE_SETUP, the setup function returns early
but the test still proceeds to run, unless another SKIP macro is used
within the test definition, leading to some code repetition. Therefore,
allow tests to be skipped directly from the setup function.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.4-rc7' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and netfilter.

  Selftests excluded - we have 58 patches and diff of +442/-199, which
  isn't really small but perhaps with the exception of the WiFi locking
  change it's old(ish) bugs.

  We have no known problems with v6.4.

  The selftest changes are rather large as MPTCP folks try to apply
  Greg's guidance that selftest from torvalds/linux should be able to
  run against stable kernels.

  Last thing I should call out is the DCCP/UDP-lite deprecation notices.
  We are fairly sure those are dead, but if we're wrong reverting them
  back in won't be fun.

  Current release - regressions:

   - wifi:
      - cfg80211: fix double lock bug in reg_wdev_chan_valid()
      - iwlwifi: mvm: spin_lock_bh() to fix lockdep regression

  Current release - new code bugs:

   - handshake: remove fput() that causes use-after-free

  Previous releases - regressions:

   - sched: cls_u32: fix reference counter leak leading to overflow

   - sched: cls_api: fix lockup on flushing explicitly created chain

  Previous releases - always broken:

   - nf_tables: integrate pipapo into commit protocol

   - nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix
     dangling pointer on failure

   - ping6: fix send to link-local addresses with VRF

   - sched: act_pedit: parse L3 header for L4 offset, the skb may not
     have the offset saved

   - sched: act_ct: fix promotion of offloaded unreplied tuple

   - sched: refuse to destroy an ingress and clsact Qdiscs if there are
     lockless change operations in flight

   - wifi: mac80211: fix handful of bugs in multi-link operation

   - ipvlan: fix bound dev checking for IPv6 l3s mode

   - eth: enetc: correct the indexes of highest and 2nd highest TCs

   - eth: ice: fix XDP memory leak when NIC is brought up and down

  Misc:

   - add deprecation notices for UDP-lite and DCCP

   - selftests: mptcp: skip tests not supported by old kernels

   - sctp: handle invalid error codes without calling BUG()"

* tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  dccp: Print deprecation notice.
  udplite: Print deprecation notice.
  octeon_ep: Add missing check for ioremap
  selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET
  net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open
  net: tipc: resize nlattr array to correct size
  sfc: fix XDP queues mode with legacy IRQ
  net: macsec: fix double free of percpu stats
  net: lapbether: only support ethernet devices
  MAINTAINERS: add reviewers for SMC Sockets
  s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()
  net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames
  net/sched: cls_api: Fix lockup on flushing explicitly created chain
  ice: Fix ice module unload
  net/handshake: remove fput() that causes use-after-free
  selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step
  net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting
  net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs
  net/sched: act_ct: Fix promotion of offloaded unreplied tuple
  wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression
  ...

Merge tag 'loongarch-fixes-6.4-1' of git://git./linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
"Some trivial bug fixes for v6.4-rc7"

* tag 'loongarch-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix debugfs_create_dir() error checking
  LoongArch: Avoid uninitialized alignment_mask
  LoongArch: Fix perf event id calculation
  LoongArch: Fix the write_fcsr() macro
  LoongArch: Let pmd_present() return true when splitting pmd

Merge tag 'for-6.4/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Fix DM thinp discard performance regression introduced during this
   merge window where DM core was splitting large discards every 128K
   (max_sectors_kb) rather than every 64M (discard_max_bytes).

- Extend DM core LOCKFS fix, made during 6.4 merge, to also fix race
   between do_mount and dm's do_suspend (in addition to the earlier
   fix's do_mount race with dm's do_resume).

- Fix DM thin metadata operations to first check if the thin-pool is in
   "fail_io" mode; otherwise UAF can occur.

- Fix DM thinp's call to __blkdev_issue_discard to use GFP_NOIO rather
   than GFP_NOWAIT (__blkdev_issue_discard cannot handle NULL return
   from bio_alloc).

* tag 'for-6.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: use op specific max_sectors when splitting abnormal io
  dm thin: fix issue_discard to pass GFP_NOIO to __blkdev_issue_discard
  dm thin metadata: check fail_io before using data_sm
  dm: don't lock fs when the map is NULL during suspend or resume

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"This is an unusually large bunch of bug fixes for the later rc cycle,
  rxe and mlx5 both dumped a lot of things at once. rxe continues to fix
  itself, and mlx5 is fixing a bunch of "queue counters" related bugs.

  There is one highly notable bug fix regarding the qkey. This small
  security check was missed in the original 2005 implementation and it
  allows some significant issues.

  Summary:

   - Two rtrs bug fixes for error unwind bugs

   - Several rxe bug fixes:
      * Incorrect Rx packet validation
      * Using memory without a refcount
      * Syzkaller found use before initialization
      * Regression fix for missing locking with the tasklet conversion
        from this merge window

   - Have bnxt report the correct link properties to userspace, this was
     a regression in v6.3

   - Several mlx5 bug fixes:
      * Kernel crash triggerable by userspace for the RAW ethernet
        profile
      * Defend against steering refcounting issues created by userspace
      * Incorrect change of QP port affinity parameters in some LAG
        configurations

   - Fix mlx5 Q counters:
      * Do not over allocate Q counters to allow userspace to use the
        full port capacity
      * Kernel crash triggered by eswitch due to mis-use of Q counters
      * Incorrect mlx5_device for Q counters in some LAG configurations

   - Properly implement the IBA spec restricting privileged qkeys to
     root

   - Always an error when reading from a disassociated device's event
     queue

   - isert bug fixes:
      * Avoid a deadlock with the CM handler and CM ID destruction
      * Correct list corruption due to incorrect locking
      * Fix a use after free around connection tear down"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix rxe_cq_post
  IB/isert: Fix incorrect release of isert connection
  IB/isert: Fix possible list corruption in CMA handler
  IB/isert: Fix dead lock in ib_isert
  RDMA/mlx5: Fix affinity assignment
  IB/uverbs: Fix to consider event queue closing also upon non-blocking mode
  RDMA/uverbs: Restrict usage of privileged QKEYs
  RDMA/cma: Always set static rate to 0 for RoCE
  RDMA/mlx5: Fix Q-counters query in LAG mode
  RDMA/mlx5: Remove vport Q-counters dependency on normal Q-counters
  RDMA/mlx5: Fix Q-counters per vport allocation
  RDMA/mlx5: Create an indirect flow table for steering anchor
  RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions
  RDMA/rxe: Fix the use-before-initialization error of resp_pkts
  RDMA/bnxt_re: Fix reporting active_{speed,width} attributes
  RDMA/rxe: Fix ref count error in check_rkey()
  RDMA/rxe: Fix packet length checks
  RDMA/rtrs: Fix rxe_dealloc_pd warning
  RDMA/rtrs: Fix the last iu->buf leak in err path

Merge tag 'spi-fix-v6.4-rc6' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A few more driver specific fixes.

  The DesignWare fix is for an issue introduced by conversion to the
  chip select accessor functions and is pretty important but the other
  two are less severe"

* tag 'spi-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: dw: Replace incorrect spi_get_chipselect with set
  spi: fsl-dspi: avoid SCK glitches with continuous transfers
  spi: cadence-quadspi: Add missing check for dma_set_mask

Merge tag 'regulator-fix-v6.4-rc6' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
"The set of regulators described for the Qualcomm PM8550 just seems to
  have been completely wrong and would likely not have worked at all if
  anything tried to actually configure anything except for enabling and
  disabling at runtime"

* tag 'regulator-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix regulators for PM8550

Merge tag 'regmap-fix-v6.4-rc6' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
"Another fix for the maple tree cache, Takashi noticed that unlike
  other caches the maple tree cache didn't check for read only registers
  before trying to sync which would result in spurious syncs for read
  only registers where we don't have a default.

  This was due to the check being open coded in the caches, we now check
  in the shared 'does this register need sync' function so that is fixed
  for this and future caches"

* tag 'regmap-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: regcache: Don't sync read-only registers

Merge tag 'media/v6.4-6' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
"A fix for dvb-core to avoid a race condition during DVB board
registration"

* tag 'media/v6.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: dvb-core: Fix use-after-free on race condition at dvb_frontend"

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Fix two regressions in ext4, one report by syzkaller[1], and reported
  by multiple users (and tracked by regzbot[2])"

[1] https://syzkaller.appspot.com/bug?extid=4acc7d910e617b360859
[2] https://linux-regtracking.leemhuis.info/regzbot/regression/ZIauBR7YiV3rVAHL@glitch/

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: drop the call to ext4_error() from ext4_get_group_info()
  Revert "ext4: remove unnecessary check in ext4_bg_num_gdb_nometa"

Merge tag '6.4-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
"Eight, mostly small, smb3 client fixes:

   - important fix for deferred close oops (race with unmount) found
     with xfstest generic/098 to some servers

   - important reconnect fix

   - fix problem with max_credits mount option

   - two multichannel (interface related) fixes

   - one trivial removal of confusing comment

   - two small debugging improvements (to better spot crediting
     problems)"

* tag '6.4-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add a warning when the in-flight count goes negative
  cifs: fix lease break oops in xfstest generic/098
  cifs: fix max_credits implementation
  cifs: fix sockaddr comparison in iface_cmp
  smb/client: print "Unknown" instead of bogus link speed value
  cifs: print all credit counters in DebugData
  cifs: fix status checks in cifs_tree_connect
  smb: remove obsolete comment

Merge branch 'udplite-dccp-print-deprecation-notice'

Kuniyuki Iwashima says:

====================
udplite/dccp: Print deprecation notice.

UDP-Lite is assumed to have no users for 7 years, and DCCP is
orphaned for 7 years too.

Let's add deprecation notice and see if anyone responds to it.
====================

Link: https://lore.kernel.org/r/20230614194705.90673-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dccp: Print deprecation notice.

DCCP was marked as Orphan in the MAINTAINERS entry 2 years ago in commit
054c4610bd05 ("MAINTAINERS: dccp: move Gerrit Renker to CREDITS"). It says
we haven't heard from the maintainer for five years, so DCCP is not well
maintained for 7 years now.

Recently DCCP only receives updates for bugs, and major distros disable it
by default.

Removing DCCP would allow for better organisation of TCP fields to reduce
the number of cache lines hit in the fast path.

Let's add a deprecation notice when DCCP socket is created and schedule its
removal to 2025.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udplite: Print deprecation notice.

Recently syzkaller reported a 7-year-old null-ptr-deref [0] that occurs
when a UDP-Lite socket tries to allocate a buffer under memory pressure.

Someone should have stumbled on the bug much earlier if UDP-Lite had been
used in a real app. Also, we do not always need a large UDP-Lite workload
to hit the bug since UDP and UDP-Lite share the same memory accounting
limit.

Removing UDP-Lite would simplify UDP code removing a bunch of conditionals
in fast path.

Let's add a deprecation notice when UDP-Lite socket is created and schedule
its removal to 2025.

Link: https://lore.kernel.org/netdev/20230523163305.66466-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeon_ep: Add missing check for ioremap

Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().

Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230615033400.2971-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET

Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.

This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.

Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program")
Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility")
Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings")
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open

Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails.
It's also needed to free everything allocated by stmmac_setup_dma_desc
and not just the dma_conf struct.

Drop free_dma_desc_resources from __stmmac_open and correctly call
free_dma_desc_resources on each user of __stmmac_open on error.

Reported-by: Jose Abreu <Jose.Abreu@synopsys.com>
Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Link: https://lore.kernel.org/r/20230614091714.15912-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: tipc: resize nlattr array to correct size

According to nla_parse_nested_deprecated(), the tb[] is supposed to the
destination array with maxtype+1 elements. In current
tipc_nl_media_get() and __tipc_nl_media_set(), a larger array is used
which is unnecessary. This patch resize them to a proper size.

Fixes: 1e55417d8fc6 ("tipc: add media set to new netlink api")
Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20230614120604.1196377-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dm: use op specific max_sectors when splitting abnormal io

Split abnormal IO in terms of the corresponding operation specific
max_sectors (max_discard_sectors, max_secure_erase_sectors or
max_write_zeroes_sectors).

This fixes a significant dm-thinp discard performance regression that
was introduced with commit e2dd8aca2d76 ("dm bio prison v1: improve
concurrent IO performance"). Relative to discard: max_discard_sectors
is used instead of max_sectors; which fixes excessive discard splitting
(e.g. max_sectors=128K vs max_discard_sectors=64M).

Tested by discarding an 1 Petabyte dm-thin device:
lvcreate -V 1125899906842624B -T test/pool -n thin
time blkdiscard /dev/test/thin

Before this fix (splitting discards every 128K): ~116m
After this fix (splitting discards every 64M) : 0m33.460s

Reported-by: Zorro Lang <zlang@redhat.com>
Fixes: 06961c487a33 ("dm: split discards further if target sets max_discard_granularity")
Requires: 13f6facf3fae ("dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE")
Fixes: e2dd8aca2d76 ("dm bio prison v1: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm thin: fix issue_discard to pass GFP_NOIO to __blkdev_issue_discard

issue_discard() passes GFP_NOWAIT to __blkdev_issue_discard() despite
its code assuming bio_alloc() always succeeds.

Commit 3dba53a958a75 ("dm thin: use __blkdev_issue_discard for async
discard support") clearly shows where things went bad:

Before commit 3dba53a958a75, dm-thin.c's open-coded
__blkdev_issue_discard_async() properly handled using GFP_NOWAIT.
Unfortunately __blkdev_issue_discard() doesn't and it was missed
during review.

Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm thin metadata: check fail_io before using data_sm

Must check pmd->fail_io before using pmd->data_sm since
pmd->data_sm may be destroyed by other processes.

       P1(kworker)                             P2(message)
do_worker
process_prepared
  process_prepared_discard_passdown_pt2
   dm_pool_dec_data_range
                                    pool_message
                                     commit
                                      dm_pool_commit_metadata
                                        ↓
                                       // commit failed
                                      metadata_operation_failed
                                       abort_transaction
                                        dm_pool_abort_metadata
                                         __open_or_format_metadata
                                           ↓
                                          dm_sm_disk_open
                                            ↓
                                           // open failed
                                           // pmd->data_sm is NULL
    dm_sm_dec_blocks
      ↓
     // try to access pmd->data_sm --> UAF

As shown above, if dm_pool_commit_metadata() and
dm_pool_abort_metadata() fail in pool_message process, kworker may
trigger UAF.

Fixes: be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm: don't lock fs when the map is NULL during suspend or resume

As described in commit 38d11da522aa ("dm: don't lock fs when the map is
NULL in process of resume"), a deadlock may be triggered between
do_resume() and do_mount().

This commit preserves the fix from commit 38d11da522aa but moves it to
where it also serves to fix a similar deadlock between do_suspend()
and do_mount(). It does so, if the active map is NULL, by clearing
DM_SUSPEND_LOCKFS_FLAG in dm_suspend() which is called by both
do_suspend() and do_resume().

Fixes: 38d11da522aa ("dm: don't lock fs when the map is NULL in process of resume")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

sfc: fix XDP queues mode with legacy IRQ

In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated
in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not
changed to a proper default value. This was leading to the driver
thinking that it has dedicated XDP queues, when it didn't.

Fix it by setting xdp_txq_queues_mode to the correct value if the driver
fallbacks to MSI or legacy IRQ mode. The correct value is
EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues.

The issue can be easily visible if the kernel is started with pci=nomsi,
then a call trace is shown. It is not shown only with sfc's modparam
interrupt_mode=2. Call trace example:
WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc]
[...skip...]
Call Trace:
  <TASK>
  efx_set_channels+0x5c/0xc0 [sfc]
  efx_probe_nic+0x9b/0x15a [sfc]
  efx_probe_all+0x10/0x1a2 [sfc]
  efx_pci_probe_main+0x12/0x156 [sfc]
  efx_pci_probe_post_io+0x18/0x103 [sfc]
  efx_pci_probe.cold+0x154/0x257 [sfc]
  local_pci_probe+0x42/0x80

Fixes: 6215b608a8c4 ("sfc: last resort fallback for lack of xdp tx queues")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macsec: fix double free of percpu stats

Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and
macsec->stats on some of the memory allocation failure paths. However, the
net_device is already registered to that moment: in macsec_newlink(), just
before calling macsec_add_dev(). This means that during unregister process
its priv_destructor - macsec_free_netdev() - will be called and will free
the stats again.

Remove freeing percpu stats inside macsec_add_dev() because
macsec_free_netdev() will correctly free the already allocated ones. The
pointers to unallocated stats stay NULL, and free_percpu() treats that
correctly.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: only support ethernet devices

It probbaly makes no sense to support arbitrary network devices
for lapbether.

syzbot reported:

skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1
kernel BUG at net/core/skbuff.c:200 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:196 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
lr : skb_panic net/core/skbuff.c:196 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
sp : ffff8000973b7260
x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000
x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea
x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140
x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0
x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00
x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4
x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086
Call trace:
skb_panic net/core/skbuff.c:196 [inline]
skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
skb_push+0xf0/0x108 net/core/skbuff.c:2409
ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383
dev_hard_header include/linux/netdevice.h:3137 [inline]
lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149
lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251
lapb_establish_data_link+0x94/0xec
lapb_device_event+0x348/0x4e0
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
__dev_notify_flags+0x2bc/0x544
dev_change_flags+0xd0/0x15c net/core/dev.c:8643
devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150
inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979
sock_do_ioctl+0x134/0x2dc net/socket.c:1201
sock_ioctl+0x4ec/0x858 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191
el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: add reviewers for SMC Sockets

adding three people from Alibaba as reviewers for SMC.
They are currently working on improving SMC on other architectures than
s390 and help with reviewing patches on top.

Thank you D. Wythe, Tony Lu and Wen Gu for your contributions and
collaboration and welcome on board as reviewers!

Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Karcher <jaka@linux.ibm.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()

This patch prevents the system from crashing when unloading the ISM module.

How to reproduce: Attach an ISM device and execute 'rmmod ism'.

Error-Log:
- Trying to free already-free IRQ 0
- WARNING: CPU: 1 PID: 966 at kernel/irq/manage.c:1890 free_irq+0x140/0x540

After calling ism_dev_exit() for each ISM device in the exit routine,
pci_unregister_driver() will execute ism_remove() for each ISM device.
Because ism_remove() also calls ism_dev_exit(),
free_irq(pci_irq_vector(pdev, 0), ism) is called twice for each ISM
device. This results in a crash with the error
'Trying to free already-free IRQ'.

In the exit routine, it is enough to call pci_unregister_driver()
because it ensures that ism_dev_exit() is called once per
ISM device.

Cc: <stable@vger.kernel.org> # 6.3+
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

LoongArch: Fix debugfs_create_dir() error checking

The debugfs_create_dir() returns ERR_PTR in case of an error and the
correct way of checking it is using the IS_ERR_OR_NULL inline function
rather than the simple null comparision. This patch fixes the issue.

Cc: stable@vger.kernel.org
Suggested-By: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Immad Mir <mirimmad17@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Avoid uninitialized alignment_mask

The hardware monitoring points for instruction fetching and load/store
operations need to align 4 bytes and 1/2/4/8 bytes respectively.

Reported-by: Colin King <colin.i.king@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Fix perf event id calculation

LoongArch PMCFG has 10bit event id rather than 8 bit, so fix it.

Cc: stable@vger.kernel.org
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Fix the write_fcsr() macro

The "write_fcsr()" macro uses wrong the positions for val and dest in
asm. Fix it!

Reported-by: Miao HAO <haomiao19@mails.ucas.ac.cn>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch: Let pmd_present() return true when splitting pmd

When we split a pmd into ptes, pmd_present() and pmd_trans_huge() should
return true, otherwise it would be treated as a swap pmd.

This is the same as arm64 does in commit b65399f6111b ("arm64/mm: Change
THP helpers to comply with generic MM semantics"), we also add a new bit
named _PAGE_PRESENT_INVALID for LoongArch.

Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames

The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535.
Plus 2 * VLAN_HLEN (4), that is up to 65543.

The picos_per_byte variable is the largest when "speed" is lowest -
SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000.

Their product - 52434400000 - exceeds 32 bits, which is a problem,
because apparently, a multiplication between two 32-bit factors is
evaluated as 32-bit before being assigned to a 64-bit variable.
In fact it's a problem for any MTU value larger than 5368.

Cast one of the factors of the multiplication to u64 to force the
multiplication to take place on 64 bits.

Issue found by Coverity.

Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: cls_api: Fix lockup on flushing explicitly created chain

Mingshuai Ren reports:

When a new chain is added by using tc, one soft lockup alarm will be
generated after delete the prio 0 filter of the chain. To reproduce
the problem, perform the following steps:
(1) tc qdisc add dev eth0 root handle 1: htb default 1
(2) tc chain add dev eth0
(3) tc filter del dev eth0 chain 0 parent 1: prio 0
(4) tc filter add dev eth0 chain 0 parent 1:

Fix the issue by accounting for additional reference to chains that are
explicitly created by RTM_NEWCHAIN message as opposed to implicitly by
RTM_NEWTFILTER message.

Fixes: 726d061286ce ("net: sched: prevent insertion of new classifiers during chain flush")
Reported-by: Mingshuai Ren <renmingshuai@huawei.com>
Closes: https://lore.kernel.org/lkml/87legswvi3.fsf@nvidia.com/T/
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20230612093426.2867183-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Fix ice module unload

Clearing the interrupt scheme before PFR reset,
during the removal routine, could cause the hardware
errors and possibly lead to system reboot, as the PF
reset can cause the interrupt to be generated.

Place the call for PFR reset inside ice_deinit_dev(),
wait until reset and all pending transactions are done,
then call ice_clear_interrupt_scheme().

This introduces a PFR reset to multiple error paths.

Additionally, remove the call for the reset from
ice_load() - it will be a part of ice_unload() now.

Error example:
[   75.229328] ice 0000:ca:00.1: Failed to read Tx Scheduler Tree - User Selection data from flash
[   77.571315] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[   77.571418] {1}[Hardware Error]: event severity: recoverable
[   77.571459] {1}[Hardware Error]:  Error 0, type: recoverable
[   77.571500] {1}[Hardware Error]:   section_type: PCIe error
[   77.571540] {1}[Hardware Error]:   port_type: 4, root port
[   77.571580] {1}[Hardware Error]:   version: 3.0
[   77.571615] {1}[Hardware Error]:   command: 0x0547, status: 0x4010
[   77.571661] {1}[Hardware Error]:   device_id: 0000:c9:02.0
[   77.571703] {1}[Hardware Error]:   slot: 25
[   77.571736] {1}[Hardware Error]:   secondary_bus: 0xca
[   77.571773] {1}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x347a
[   77.571821] {1}[Hardware Error]:   class_code: 060400
[   77.571858] {1}[Hardware Error]:   bridge: secondary_status: 0x2800, control: 0x0013
[   77.572490] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020
[   77.572870] pcieport 0000:c9:02.0:    [21] ACSViol                (First)
[   77.573222] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID
[   77.573554] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010
[   77.691273] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[   77.691738] {2}[Hardware Error]: event severity: recoverable
[   77.691971] {2}[Hardware Error]:  Error 0, type: recoverable
[   77.692192] {2}[Hardware Error]:   section_type: PCIe error
[   77.692403] {2}[Hardware Error]:   port_type: 4, root port
[   77.692616] {2}[Hardware Error]:   version: 3.0
[   77.692825] {2}[Hardware Error]:   command: 0x0547, status: 0x4010
[   77.693032] {2}[Hardware Error]:   device_id: 0000:c9:02.0
[   77.693238] {2}[Hardware Error]:   slot: 25
[   77.693440] {2}[Hardware Error]:   secondary_bus: 0xca
[   77.693641] {2}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x347a
[   77.693853] {2}[Hardware Error]:   class_code: 060400
[   77.694054] {2}[Hardware Error]:   bridge: secondary_status: 0x0800, control: 0x0013
[   77.719115] pci 0000:ca:00.1: AER: can't recover (no error_detected callback)
[   77.719140] pcieport 0000:c9:02.0: AER: device recovery failed
[   77.719216] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020
[   77.719390] pcieport 0000:c9:02.0:    [21] ACSViol                (First)
[   77.719557] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID
[   77.719723] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010

Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230612171421.21570-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-06-12 (igc, igb)

This series contains updates to igc and igb drivers.

Husaini clears Tx rings when interface is brought down for igc.

Vinicius disables PTM and PCI busmaster when removing igc driver.

Alex adds error check and path for NVM read error on igb.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  igb: fix nvm.ops.read() error handling
  igc: Fix possible system crash when loading module
  igc: Clean the TX buffer and TX descriptor ring
====================

Link: https://lore.kernel.org/r/20230612205208.115292-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/handshake: remove fput() that causes use-after-free

A reference underflow is found in TLS handshake subsystem that causes a
direct use-after-free. Part of the crash log is like below:

[    2.022114] ------------[ cut here ]------------
[    2.022193] refcount_t: underflow; use-after-free.
[    2.022288] WARNING: CPU: 0 PID: 60 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
[    2.022432] Modules linked in:
[    2.022848] RIP: 0010:refcount_warn_saturate+0xbe/0x110
[    2.023231] RSP: 0018:ffffc900001bfe18 EFLAGS: 00000286
[    2.023325] RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00000000ffffdfff
[    2.023438] RDX: 0000000000000000 RSI: 00000000ffffffea RDI: 0000000000000001
[    2.023555] RBP: ffff888004c20098 R08: ffffffff82b392c8 R09: 00000000ffffdfff
[    2.023693] R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888004c200d8
[    2.023813] R13: 0000000000000000 R14: ffff888004c20000 R15: ffffc90000013ca8
[    2.023930] FS:  0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[    2.024062] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.024161] CR2: ffff888003601000 CR3: 0000000002a2e000 CR4: 00000000000006f0
[    2.024275] Call Trace:
[    2.024322]  <TASK>
[    2.024367]  ? __warn+0x7f/0x130
[    2.024430]  ? refcount_warn_saturate+0xbe/0x110
[    2.024513]  ? report_bug+0x199/0x1b0
[    2.024585]  ? handle_bug+0x3c/0x70
[    2.024676]  ? exc_invalid_op+0x18/0x70
[    2.024750]  ? asm_exc_invalid_op+0x1a/0x20
[    2.024830]  ? refcount_warn_saturate+0xbe/0x110
[    2.024916]  ? refcount_warn_saturate+0xbe/0x110
[    2.024998]  __tcp_close+0x2f4/0x3d0
[    2.025065]  ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10
[    2.025168]  tcp_close+0x1f/0x70
[    2.025231]  inet_release+0x33/0x60
[    2.025297]  sock_release+0x1f/0x80
[    2.025361]  handshake_req_cancel_test2+0x100/0x2d0
[    2.025457]  kunit_try_run_case+0x4c/0xa0
[    2.025532]  kunit_generic_run_threadfn_adapter+0x15/0x20
[    2.025644]  kthread+0xe1/0x110
[    2.025708]  ? __pfx_kthread+0x10/0x10
[    2.025780]  ret_from_fork+0x2c/0x50

One can enable CONFIG_NET_HANDSHAKE_KUNIT_TEST config to reproduce above
crash.

The root cause of this bug is that the commit 1ce77c998f04
("net/handshake: Unpin sock->file if a handshake is cancelled") adds one
additional fput() function. That patch claims that the fput() is used to
enable sock->file to be freed even when user space never calls DONE.

However, it seems that the intended DONE routine will never give an
additional fput() of ths sock->file. The existing two of them are just
used to balance the reference added in sockfd_lookup().

This patch revert the mentioned commit to avoid the use-after-free. The
patched kernel could successfully pass the KUNIT test and boot to shell.

[    0.733613]     # Subtest: Handshake API tests
[    0.734029]     1..11
[    0.734255]         KTAP version 1
[    0.734542]         # Subtest: req_alloc API fuzzing
[    0.736104]         ok 1 handshake_req_alloc NULL proto
[    0.736114]         ok 2 handshake_req_alloc CLASS_NONE
[    0.736559]         ok 3 handshake_req_alloc CLASS_MAX
[    0.737020]         ok 4 handshake_req_alloc no callbacks
[    0.737488]         ok 5 handshake_req_alloc no done callback
[    0.737988]         ok 6 handshake_req_alloc excessive privsize
[    0.738529]         ok 7 handshake_req_alloc all good
[    0.739036]     # req_alloc API fuzzing: pass:7 fail:0 skip:0 total:7
[    0.739444]     ok 1 req_alloc API fuzzing
[    0.740065]     ok 2 req_submit NULL req arg
[    0.740436]     ok 3 req_submit NULL sock arg
[    0.740834]     ok 4 req_submit NULL sock->file
[    0.741236]     ok 5 req_lookup works
[    0.741621]     ok 6 req_submit max pending
[    0.741974]     ok 7 req_submit multiple
[    0.742382]     ok 8 req_cancel before accept
[    0.742764]     ok 9 req_cancel after accept
[    0.743151]     ok 10 req_cancel after done
[    0.743510]     ok 11 req_destroy works
[    0.743882] # Handshake API tests: pass:11 fail:0 skip:0 total:11
[    0.744205] # Totals: pass:17 fail:0 skip:0 total:17

Acked-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: 1ce77c998f04 ("net/handshake: Unpin sock->file if a handshake is cancelled")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230613083204.633896-1-linma@zju.edu.cn
Link: https://lore.kernel.org/r/20230614015249.987448-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2023-06-14' of git://git./linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
A couple of straggler fixes, mostly in the stack:
- fix fragmentation for multi-link related elements
- fix callback copy/paste error
- fix multi-link locking
- remove double-locking of wiphy mutex
- transmit only on active links, not all
- activate links in the correct order
- don't remove links that weren't added
- disable soft-IRQs for LQ lock in iwlwifi

* tag 'wireless-2023-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression
  wifi: mac80211: fragment per STA profile correctly
  wifi: mac80211: Use active_links instead of valid_links in Tx
  wifi: cfg80211: remove links only on AP
  wifi: mac80211: take lock before setting vif links
  wifi: cfg80211: fix link del callback to call correct handler
  wifi: mac80211: fix link activation settings order
  wifi: cfg80211: fix double lock bug in reg_wdev_chan_valid()
====================

Link: https://lore.kernel.org/r/20230614075502.11765-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ext4: drop the call to ext4_error() from ext4_get_group_info()

A recent patch added a call to ext4_error() which is problematic since
some callers of the ext4_get_group_info() function may be holding a
spinlock, whereas ext4_error() must never be called in atomic context.

This triggered a report from Syzbot: "BUG: sleeping function called from
invalid context in ext4_update_super" (see the link below).

Therefore, drop the call to ext4_error() from ext4_get_group_info(). In
the meantime use eight characters tabs instead of nine characters ones.

Reported-by: syzbot+4acc7d910e617b360859@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000070575805fdc6cdb2@google.com/
Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail")
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20230614100446.14337-1-fmdefrancesco@gmail.com

Revert "ext4: remove unnecessary check in ext4_bg_num_gdb_nometa"

This reverts commit ad3f09be6cfe332be8ff46c78e6ec0f8839107aa.

The reverted commit was intended to simpfy the code to get group
descriptor block number in non-meta block group by assuming
s_gdb_count is block number used for all non-meta block group descriptors.
However s_gdb_count is block number used for all meta *and* non-meta
group descriptors. So s_gdb_group will be > actual group descriptor block
number used for all non-meta block group which should be "total non-meta
block group" / "group descriptors per block", e.g. s_first_meta_bg.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230613225025.3859522-1-shikemeng@huaweicloud.com
Fixes: ad3f09be6cfe ("ext4: remove unnecessary check in ext4_bg_num_gdb_nometa")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Revert "media: dvb-core: Fix use-after-free on race condition at dvb_frontend"

As reported by Thomas Voegtle <tv@lio96.de>, sometimes a DVB card does
not initialize properly booting Linux 6.4-rc4. This is not always, maybe
in 3 out of 4 attempts.

After double-checking, the root cause seems to be related to the
UAF fix, which is causing a race issue:

[   26.332149] tda10071 7-0005: found a 'NXP TDA10071' in cold state, will try to load a firmware
[   26.340779] tda10071 7-0005: downloading firmware from file 'dvb-fe-tda10071.fw'
[  989.277402] INFO: task vdr:743 blocked for more than 491 seconds.
[  989.283504]       Not tainted 6.4.0-rc5-i5 #249
[  989.288036] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  989.295860] task:vdr             state:D stack:0     pid:743   ppid:711    flags:0x00004002
[  989.295865] Call Trace:
[  989.295867]  <TASK>
[  989.295869]  __schedule+0x2ea/0x12d0
[  989.295877]  ? asm_sysvec_apic_timer_interrupt+0x16/0x20
[  989.295881]  schedule+0x57/0xc0
[  989.295884]  schedule_preempt_disabled+0xc/0x20
[  989.295887]  __mutex_lock.isra.16+0x237/0x480
[  989.295891]  ? dvb_get_property.isra.10+0x1bc/0xa50
[  989.295898]  ? dvb_frontend_stop+0x36/0x180
[  989.338777]  dvb_frontend_stop+0x36/0x180
[  989.338781]  dvb_frontend_open+0x2f1/0x470
[  989.338784]  dvb_device_open+0x81/0xf0
[  989.338804]  ? exact_lock+0x20/0x20
[  989.338808]  chrdev_open+0x7f/0x1c0
[  989.338811]  ? generic_permission+0x1a2/0x230
[  989.338813]  ? link_path_walk.part.63+0x340/0x380
[  989.338815]  ? exact_lock+0x20/0x20
[  989.338817]  do_dentry_open+0x18e/0x450
[  989.374030]  path_openat+0xca5/0xe00
[  989.374031]  ? terminate_walk+0xec/0x100
[  989.374034]  ? path_lookupat+0x93/0x140
[  989.374036]  do_filp_open+0xc0/0x140
[  989.374038]  ? __call_rcu_common.constprop.91+0x92/0x240
[  989.374041]  ? __check_object_size+0x147/0x260
[  989.374043]  ? __check_object_size+0x147/0x260
[  989.374045]  ? alloc_fd+0xbb/0x180
[  989.374048]  ? do_sys_openat2+0x243/0x310
[  989.374050]  do_sys_openat2+0x243/0x310
[  989.374052]  do_sys_open+0x52/0x80
[  989.374055]  do_syscall_64+0x5b/0x80
[  989.421335]  ? __task_pid_nr_ns+0x92/0xa0
[  989.421337]  ? syscall_exit_to_user_mode+0x20/0x40
[  989.421339]  ? do_syscall_64+0x67/0x80
[  989.421341]  ? syscall_exit_to_user_mode+0x20/0x40
[  989.421343]  ? do_syscall_64+0x67/0x80
[  989.421345]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  989.421348] RIP: 0033:0x7fe895d067e3
[  989.421349] RSP: 002b:00007fff933c2ba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[  989.421351] RAX: ffffffffffffffda RBX: 00007fff933c2c10 RCX: 00007fe895d067e3
[  989.421352] RDX: 0000000000000802 RSI: 00005594acdce160 RDI: 00000000ffffff9c
[  989.421353] RBP: 0000000000000802 R08: 0000000000000000 R09: 0000000000000000
[  989.421353] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001
[  989.421354] R13: 00007fff933c2ca0 R14: 00000000ffffffff R15: 00007fff933c2c90
[  989.421355]  </TASK>

This reverts commit 6769a0b7ee0c3b31e1b22c3fadff2bfb642de23f.

Fixes: 6769a0b7ee0c ("media: dvb-core: Fix use-after-free on race condition at dvb_frontend")
Link: https://lore.kernel.org/all/da5382ad-09d6-20ac-0d53-611594b30861@lio96.de/
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

RDMA/rxe: Fix rxe_cq_post

A recent patch replaced a tasklet execution of cq->comp_handler by a
direct call. While this made sense it let changes to cq->notify state be
unprotected and assumed that the cq completion machinery and the ulp done
callbacks were reentrant. The result is that in some cases completion
events can be lost. This patch moves the cq->comp_handler call inside of
the spinlock in rxe_cq_post which solves both issues. This is compatible
with the matching code in the request notify verb.

Fixes: 78b26a335310 ("RDMA/rxe: Remove tasklet call from rxe_cq.c")
Link: https://lore.kernel.org/r/20230612155032.17036-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

cifs: add a warning when the in-flight count goes negative

We've seen the in-flight count go into negative with some
internal stress testing in Microsoft.

Adding a WARN when this happens, in hope of understanding
why this happens when it happens.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: fix lease break oops in xfstest generic/098

umount can race with lease break so need to check if
tcon->ses->server is still valid to send the lease
break response.

Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Fixes: 59a556aebc43 ("SMB3: drop reference to cfile before sending oplock break")
Signed-off-by: Steve French <stfrench@microsoft.com>

selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step

Setting the IPv6 address generation mode of a net device during its
creation never worked, but after commit b0ad3c179059 ("rtnetlink: call
validate_linkmsg in rtnl_create_link") it explicitly fails [1]. The
failure is caused by the fact that validate_linkmsg() is called before
the net device is registered, when it still does not have an 'inet6_dev'.

Likewise, raising the net device before setting the address generation
mode is meaningless, because by the time the mode is set, the address
has already been generated.

Therefore, fix the test to first create the net device, then set its
IPv6 address generation mode and finally bring it up.

[1]
# ip link add name mydev addrgenmode eui64 type dummy
RTNETLINK answers: Address family not supported by protocol

Fixes: ba95e7930957 ("selftests: forwarding: hw_stats_l3: Add a new test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/f3b05d85b2bc0c3d6168fe8f7207c6c8365703db.1686580046.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'net-sched-fix-race-conditions-in-mini_qdisc_pair_swap'

Peilin Ye says:

====================
net/sched: Fix race conditions in mini_qdisc_pair_swap()

These 2 patches fix race conditions for ingress and clsact Qdiscs as
reported [1] by syzbot, split out from another [2] series (last 2 patches
of it). Per-patch changelog omitted.

Patch 1 hasn't been touched since last version; I just included
everybody's tag.

Patch 2 bases on patch 6 v1 of [2], with comments and commit log slightly
changed. We also need rtnl_dereference() to load ->qdisc_sleeping since
commit d636fc5dd692 ("net: sched: add rcu annotations around
qdisc->qdisc_sleeping"), so I changed that; please take yet another look,
thanks!

Patch 2 has been tested with the new reproducer Pedro posted [3].

[1] https://syzkaller.appspot.com/bug?extid=b53a9c0d1ea4ad62da8b
[2] https://lore.kernel.org/r/cover.1684887977.git.peilin.ye@bytedance.com/
[3] https://lore.kernel.org/r/7879f218-c712-e9cc-57ba-665990f5f4c9@mojatatu.com/
====================

Link: https://lore.kernel.org/r/cover.1686355297.git.peilin.ye@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting

mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress.  ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap().  Similar
for clsact Qdiscs and miniq_egress.

Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:

BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901
...
Call Trace:
  <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
  print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319
  print_report mm/kasan/report.c:430 [inline]
  kasan_report+0x11c/0x130 mm/kasan/report.c:536
  mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
  tcf_chain_head_change_item net/sched/cls_api.c:495 [inline]
  tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509
  tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline]
  tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline]
  tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266
...

@old and @new should not affect each other.  In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.

Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions).  Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:

In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.

Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests.  Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.

Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".

[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:

  Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
  then adds a flower filter X to A.

  Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
  b2) to replace A, then adds a flower filter Y to B.

Thread 1               A's refcnt   Thread 2
  RTM_NEWQDISC (A, RTNL-locked)
   qdisc_create(A)               1
   qdisc_graft(A)                9

  RTM_NEWTFILTER (X, RTNL-unlocked)
   __tcf_qdisc_find(A)          10
   tcf_chain0_head_change(A)
   mini_qdisc_pair_swap(A) (1st)
            |
            |                         RTM_NEWQDISC (B, RTNL-locked)
         RCU sync                2     qdisc_graft(B)
            |                    1     notify_and_destroy(A)
            |
   tcf_block_release(A)          0    RTM_NEWTFILTER (Y, RTNL-unlocked)
   qdisc_destroy(A)                    tcf_chain0_head_change(B)
   tcf_chain0_head_change_cb_del(A)    mini_qdisc_pair_swap(B) (2nd)
   mini_qdisc_pair_swap(A) (3rd)                |
           ...                                 ...

Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1.  Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().

This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.

Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops")
Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs

Grafting ingress and clsact Qdiscs does not need a for-loop in
qdisc_graft(). Refactor it. No functional changes intended.

Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: act_ct: Fix promotion of offloaded unreplied tuple

Currently UNREPLIED and UNASSURED connections are added to the nf flow
table. This causes the following connection packets to be processed
by the flow table which then skips conntrack_in(), and thus such the
connections will remain UNREPLIED and UNASSURED even if reply traffic
is then seen. Even still, the unoffloaded reply packets are the ones
triggering hardware update from new to established state, and if
there aren't any to triger an update and/or previous update was
missed, hardware can get out of sync with sw and still mark
packets as new.

Fix the above by:
1) Not skipping conntrack_in() for UNASSURED packets, but still
   refresh for hardware, as before the cited patch.
2) Try and force a refresh by reply-direction packets that update
   the hardware rules from new to established state.
3) Remove any bidirectional flows that didn't failed to update in
   hardware for re-insertion as bidrectional once any new packet
   arrives.

Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression

Lockdep on 6.4-rc on ThinkPad X1 Carbon 5th says
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.4.0-rc5 #1 Not tainted
-----------------------------------------------------
kworker/3:1/49 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff8881066fa368 (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}, at: rs_drv_get_rate+0x46/0xe7

and this task is already holding:
ffff8881066f80a8 (&sta->rate_ctrl_lock){+.-.}-{2:2}, at: rate_control_get_rate+0xbd/0x126
which would create a new lock dependency:
(&sta->rate_ctrl_lock){+.-.}-{2:2} -> (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}

but this new dependency connects a SOFTIRQ-irq-safe lock:
(&sta->rate_ctrl_lock){+.-.}-{2:2}
etc. etc. etc.

Changing the spin_lock() in rs_drv_get_rate() to spin_lock_bh() was not
enough to pacify lockdep, but changing them all on pers.lock has worked.

Fixes: a8938bc881d2 ("wifi: iwlwifi: mvm: Add locking to the rate read flow")
Signed-off-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/79ffcc22-9775-cb6d-3ffd-1a517c40beef@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge branch 'fix-small-bugs-and-annoyances-in-tc-testing'

Vlad Buslov says:

====================
Fix small bugs and annoyances in tc-testing
====================

Link: https://lore.kernel.org/r/20230612075712.2861848-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Remove configs that no longer exist

Some qdiscs and classifiers have recently been retired from kernel.
However, tc-testing config is still cluttered with them which causes noise
when using merge_config.sh script to update existing config for tc-testing
compatibility. Remove the config settings for affected qdiscs and
classifiers.

Fixes: fb38306ceb9e ("net/sched: Retire ATM qdisc")
Fixes: 051d44209842 ("net/sched: Retire CBQ qdisc")
Fixes: bbe77c14ee61 ("net/sched: Retire dsmark qdisc")
Fixes: 265b4da82dbf ("net/sched: Retire rsvp classifier")
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Fix SFB db test

Setting very small value of db like 10ms introduces rounding errors when
converting to/from jiffies on some kernel configs. For example, on 250hz
the actual value will be set to 12ms which causes the test to fail:

# $ sudo ./tdc.py  -d eth2 -e 3410
#  -- ns/SubPlugin.__init__
# Test 3410: Create SFB with db setting
#
# All test results:
#
# 1..1
# not ok 1 3410 - Create SFB with db setting
#         Could not match regex pattern. Verify command output:
# qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p

Set the value to 100ms instead which currently seem to work on 100hz,
250hz, 300hz and 1000hz kernel configs.

Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Fix Error: failed to find target LOG

Add missing netfilter config dependency.

Fixes following example error when running tests via tdc.sh for all XT
tests:

# $ sudo ./tdc.py -d eth2 -e 2029
# Test 2029: Add xt action with log-prefix
# exit: 255
# exit: 0
#  failed to find target LOG
#
# bad action parsing
# parse_action: bad value (7:xt)!
# Illegal "action"
#
# -----> teardown stage *** Could not execute: "$TC actions flush action xt"
#
# -----> teardown stage *** Error message: "Error: Cannot flush unknown TC action.
# We have an error flushing
# "
# returncode 1; expected [0]
#
# -----> teardown stage *** Aborting test run.
#
# <_io.BufferedReader name=3> *** stdout ***
#
# <_io.BufferedReader name=5> *** stderr ***
# "-----> teardown stage" did not complete successfully
# Exception <class '__main__.PluginMgrTestFail'> ('teardown', ' failed to find target LOG\n\nbad action parsing\nparse_action: bad value (7:xt)!\nIllegal "action"\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 2029 Add xt action with log-prefix stage teardown)
# ---------------
# traceback
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner
#     res = run_one_test(pm, args, index, tidx)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test
#     prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env
#     raise PluginMgrTestFail(
# ---------------
# accumulated output for this test:
#  failed to find target LOG
#
# bad action parsing
# parse_action: bad value (7:xt)!
# Illegal "action"
#
# ---------------
#
# All test results:
#
# 1..1
# ok 1 2029 - Add xt action with log-prefix # skipped - "-----> teardown stage" did not complete successfully

Fixes: 910d504bc187 ("selftests/tc-testings: add selftests for xt action")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/tc-testing: Fix Error: Specified qdisc kind is unknown.

All TEQL tests assume that sch_teql module is loaded. Load module in tdc.sh
before running qdisc tests.

Fixes following example error when running tests via tdc.sh for all TEQL
tests:

# $ sudo ./tdc.py -d eth2 -e 84a0
#  -- ns/SubPlugin.__init__
# Test 84a0: Create TEQL with default setting
# exit: 2
# exit: 0
# Error: Specified qdisc kind is unknown.
#
# -----> teardown stage *** Could not execute: "$TC qdisc del dev $DUMMY handle 1: root"
#
# -----> teardown stage *** Error message: "Error: Invalid handle.
# "
# returncode 2; expected [0]
#
# -----> teardown stage *** Aborting test run.
#
# <_io.BufferedReader name=3> *** stdout ***
#
# <_io.BufferedReader name=5> *** stderr ***
# "-----> teardown stage" did not complete successfully
# Exception <class '__main__.PluginMgrTestFail'> ('teardown', 'Error: Specified qdisc kind is unknown.\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 84a0 Create TEQL with default setting stage teardown)
# ---------------
# traceback
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner
#     res = run_one_test(pm, args, index, tidx)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test
#     prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout)
#   File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env
#     raise PluginMgrTestFail(
# ---------------
# accumulated output for this test:
# Error: Specified qdisc kind is unknown.
#
# ---------------
#
# All test results:
#
# 1..1
# ok 1 84a0 - Create TEQL with default setting # skipped - "-----> teardown stage" did not complete successfully

Fixes: cc62fbe114c9 ("selftests/tc-testing: add selftests for teql qdisc")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ethernet: ti: am65-cpsw: Call of_node_put() on error path

This code returns directly but it should instead call of_node_put()
to drop some reference counts.

Fixes: dab2b265dd23 ("net: ethernet: ti: am65-cpsw: Add support for SERDES configuration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/e3012f0c-1621-40e6-bf7d-03c276f6e07f@kili.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nios2_fix_v6.4' of git://git./linux/kernel/git/dinguyen/linux

Pull NIOS2 dts fix from Dinh Nguyen:

- Fix tse_mac "max-frame-size" property

* tag 'nios2_fix_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: dts: Fix tse_mac "max-frame-size" property

nios2: dts: Fix tse_mac "max-frame-size" property

The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.

Fixes: 95acd4c7b69c ("nios2: Device tree support")
Fixes: 61c610ec61bb ("nios2: Add Max10 device tree")
Cc: <stable@vger.kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

spi: dw: Replace incorrect spi_get_chipselect with set

Commit 445164e8c136 ("spi: dw: Replace spi->chip_select references with
function calls") replaced direct access to spi.chip_select with
spi_*_chipselect calls but incorrectly replaced a set instance with a
get instance, replace the incorrect instance.

Fixes: 445164e8c136 ("spi: dw: Replace spi->chip_select references with function calls")
Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230613162103.569812-1-abe.kohandel@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'devicetree-fixes-for-6.4-3' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

- Fix missing of_node_put() in init_overlay_changeset()

- Fix schema for qcom,pmic-mpp "qcom,paired" property

- Fix 'additionalProperties' in silvaco,i3c-master binding

- usage-model.rst: Use documented "arm,primecell" compatible string

- Update Damien Le Moal's email address

- Fixes in Realtek Bluetooth binding

* tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: qcom,pmic-mpp: Fix schema for "qcom,paired"
  dt-bindings: i3c: silvaco,i3c-master: fix missing schema restriction
  of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset()
  docs: zh_CN/devicetree: sync usage-model fix
  docs: dt: fix documented Primecell compatible string
  dt-bindings: Change Damien Le Moal's contact email
  dt-bindings: net: realtek-bluetooth: Fix double RTL8723CS in desc
  dt-bindings: net: realtek-bluetooth: Fix RTL8821CS binding

dt-bindings: pinctrl: qcom,pmic-mpp: Fix schema for "qcom,paired"

The "qcom,paired" schema is all wrong. First, it's a list rather than an
object(dictionary). Second, it is missing a required type. The meta-schema
normally catches this, but schemas under "$defs" was not getting checked.
A fix for that is pending.

Fixes: f9a06b810951 ("dt-bindings: pinctrl: qcom,pmic-mpp: Convert qcom pmic mpp bindings to YAML")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150606.1528107-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

regmap: regcache: Don't sync read-only registers

regcache_maple_sync() tries to sync all cached values no matter
whether it's writable or not.  OTOH, regache_sync_val() does care the
wrtability and returns -EIO for a read-only register.  This results in
an error message like:
  snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x2f0009. -5
and the sync loop is aborted incompletely.

This patch adds the writable register check to regcache_sync_val() for
addressing the bug above.

Note that, although we may add the check in the caller side
(regcache_maple_sync()), here we put in regcache_sync_val(), so that a
similar case like this can be avoided in future.

Fixes: f033c26de5a5 ("regmap: Add maple tree based register cache")
Link: https://lore.kernel.org/r/877cs7g6f1.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230613112240.3361-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'mptcp-fixes'

Matthieu Baerts says:

====================
selftests: mptcp: skip tests not supported by old kernels (part 3)

After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.

Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.

In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.

To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftest or just some sub-tests before starting them. This cannot be
applied in all cases.

Similar to the second part, this third one focuses on marking different
sub-tests as skipped if some MPTCP features are not supported. This
time, only in "mptcp_join.sh" selftest, the remaining one, is modified.
Several techniques are used here to achieve this task:

- Before starting some tests:

  - Check if a file (sysctl knob) is present: that's what patch 12/17 is
    doing for the userspace PM feature.

  - Check if a required kernel symbol is present in /proc/kallsyms:
    patches 9, 10, 14 and 15/17 are using this technique.

  - Check if it is possible to setup a particular network environment
    requiring Netfilter or TC: if the preparation step fail, the linked
    sub-test is marked as skipped. Patch 5/17 is doing that.

  - Check if a MIB counter is available: patches 7 and 13/17 do that.

  - Check if the kernel version is newer than a specific one: patch 1/17
    adds some helpers in mptcp_lib.sh to ease its use. That's not ideal
    and it is only used as last resort but as mentioned above, it is
    important to skip tests if they are not supported not to have the
    whole selftest always being marked as failed on old kernels. Patches
    11 and 17/17 are checking the kernel version. An alternative would
    be to ignore the results for some sub-tests but that's not ideal
    too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be
    set to 1 not to skip these tests if the running kernel doesn't have
    a supported version.

- After having launched the tests:

  - Adapt the expectations depending on the presence of a kernel symbol
    (patch 6/17) or a kernel version (patch 8/17).

  - Check is a MIB counter is available and skip the verification if
    not. Patch 4/17 is using this technique.

Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.

Patch 2/17 uses 'iptables-legacy' if available because it might be
needed when using an older kernel not supporting iptables-nft.

Patch 3/17 adds some helpers used in the other patches mentioned to
easily mark sub-tests as skipped.

Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code
from userspace_pm.sh but without using the "code style" and ways of
using tools and printing messages from MPTCP Join selftest.

Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================

Link: https://lore.kernel.org/r/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip mixed tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: uniform listener tests

The alignment was different from the other tests because tabs were used
instead of spaces.

While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip PM listener tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of PM listener events introduced by commit
f8c9dfbd875b ("mptcp: add pm listener events").

It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip MPC backups tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip fail tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the MP_FAIL / infinite mapping introduced
by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the
following ones.

It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Fixes: 2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip userspace PM tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the userspace PM introduced by commit
4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs")
and the following ones.

It is possible to look for the MPTCP pm_type's sysctl knob to know in
advance if the userspace PM is available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip fullmesh flag tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the fullmesh flag for the in-kernel PM
introduced by commit 2843ff6f36db ("mptcp: remote addresses fullmesh")
and commit 1a0d6136c5f0 ("mptcp: local addresses fullmesh").

It looks like there is no easy external sign we can use to predict the
expected behaviour. We could add the flag and then check if it has been
added but for that, and for each fullmesh test, we would need to setup a
new environment, do the checks, clean it and then only start the test
from yet another clean environment. To keep it simple and avoid
introducing new issues, we look for a specific kernel version. That's
not ideal but an acceptable solution for this case.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6a0653b96f5d ("selftests: mptcp: add fullmesh setting tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip backup if set flag on ID not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Commit bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
has simplified the way the backup flag is set on an endpoint. Instead of
doing:

./pm_nl_ctl set 10.0.2.1 flags backup

Now we do:

./pm_nl_ctl set id 1 flags backup

The new way is easier to maintain but it is also incompatible with older
kernels not supporting the implicit endpoints putting in place the
infrastructure to set flags per ID, hence the second Fixes tag.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
Cc: stable@vger.kernel.org
Fixes: 4cf86ae84c71 ("mptcp: strict local address ID selection")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip implicit tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of the implicit endpoints introduced by
commit d045b9eb95a9 ("mptcp: introduce implicit endpoints").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Note that here and in the following commits, we re-do the same check for
each sub-test of the same function for a few reasons. The main one is
not to break the ID assign to each test in order to be able to easily
compare results between different kernel versions. Also, we can still
run a specific test even if it is skipped. Another reason is that it
makes it clear during the review that a specific subtest will be skipped
or not under certain conditions. At the end, it looks OK to call the
exact same helper multiple times: it is not a critical path and it is
the same code that is executed, not really more cases to maintain.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: support RM_ADDR for used endpoints or not

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a UAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip Fastclose tests if not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of MP_FASTCLOSE introduced in commit
f284c0c77321 ("mptcp: implement fastclose xmit path").

If the MIB counter is not available, the test cannot be verified and the
behaviour will not be the expected one. So we can skip the test if the
counter is missing.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 01542c9bf9ab ("selftests: mptcp: add fastclose testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: support local endpoint being tracked or not

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a uAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.

It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms
because it was needed to introduce the mentioned feature. So we can know
in advance what the behaviour we are expecting here instead of
supporting the two behaviours.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip test if iptables/tc cmds fail

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: skip check if MIB counter not supported

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the MPTCP MIB counters introduced in commit fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.

If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.

Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.

This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.

Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: helpers to skip tests

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.

While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: use 'iptables-legacy' if available

IPTables commands using 'iptables-nft' fail on old kernels, at least
5.15 because it doesn't see the default IPTables chains:

$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: lib: skip if not below kernel version

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.

Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.

This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fixes-for-q-usgmii-speeds-and-autoneg'

Maxime Chevallier says:

====================
fixes for Q-USGMII speeds and autoneg

This is the second version of a small changeset for QUSGMII support,
fixing inconsistencies in reported max speed and control word parsing.

As reported here [1], there are some inconsistencies for the Q-USGMII
mode speeds and configuration. The first patch in this fixup series
makes so that we correctly report the max speed of 1Gbps for this mode.

The second patch uses a dedicated helper to decode the control word.
This is necessary as although USGMII control words are close to USXGMII,
they don't support the same speeds.

[1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/
====================

Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: use a dedicated helper to parse usgmii control word

Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds

Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phylink: report correct max speed for QUSGMII

Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.

Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git./linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
"19 hotfixes. 14 are cc:stable and the remainder address issues which
  were introduced during this development cycle or which were considered
  inappropriate for a backport"

* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  zswap: do not shrink if cgroup may not zswap
  page cache: fix page_cache_next/prev_miss off by one
  ocfs2: check new file size on fallocate call
  mailmap: add entry for John Keeping
  mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
  epoll: ep_autoremove_wake_function should use list_del_init_careful
  mm/gup_test: fix ioctl fail for compat task
  nilfs2: reject devices with insufficient block count
  ocfs2: fix use-after-free when unmounting read-only filesystem
  lib/test_vmalloc.c: avoid garbage in page array
  nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
  riscv/purgatory: remove PGO flags
  powerpc/purgatory: remove PGO flags
  x86/purgatory: remove PGO flags
  kexec: support purgatories with .text.hot sections
  mm/uffd: allow vma to merge as much as possible
  mm/uffd: fix vma operation where start addr cuts part of vma
  radix-tree: move declarations to header
  nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()

igb: fix nvm.ops.read() error handling

Add error handling into igb_set_eeprom() function, in case
nvm.ops.read() fails just quit with error code asap.

Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Fix possible system crash when loading module

Guarantee that when probe() is run again, PTM and PCI busmaster will be
in the same state as it was if the driver was never loaded.

Avoid an i225/i226 hardware issue that PTM requests can be made even
though PCI bus mastering is not enabled. These unexpected PTM requests
can crash some systems.

So, "force" disable PTM and busmastering before removing the driver,
so they can be re-enabled in the right order during probe(). This is
more like a workaround and should be applicable for i225 and i226, in
any platform.

Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Clean the TX buffer and TX descriptor ring

There could be a race condition during link down where interrupt
being generated and igc_clean_tx_irq() been called to perform the
TX completion. Properly clear the TX buffer/descriptor ring and
disable the TX Queue ring in igc_free_tx_resources() to avoid that.

Kernel trace:
[  108.237177] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLIFUI1.R00.4204.A00.2105270302 05/27/2021
[  108.237178] RIP: 0010:refcount_warn_saturate+0x55/0x110
[  108.242143] RSP: 0018:ffff9e7980003db0 EFLAGS: 00010286
[  108.245555] Code: 84 bc 00 00 00 c3 cc cc cc cc 85 f6 74 46 80 3d 20 8c 4d 01 00 75 ee 48 c7 c7 88 f4 03 ab c6 05 10 8c 4d 01 01 e8 0b 10 96 ff <0f> 0b c3 cc cc cc cc 80 3d fc 8b 4d 01 00 75 cb 48 c7 c7 b0 f4 03
[  108.250434]
[  108.250434] RSP: 0018:ffff9e798125f910 EFLAGS: 00010286
[  108.254358] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  108.259325]
[  108.259325] RAX: 0000000000000000 RBX: ffff8ddb935b8000 RCX: 0000000000000027
[  108.261868] RDX: ffff8de250a28800 RSI: ffff8de250a1c580 RDI: ffff8de250a1c580
[  108.265538] RDX: 0000000000000027 RSI: 0000000000000002 RDI: ffff8de250a9c588
[  108.265539] RBP: ffff8ddb935b8000 R08: ffffffffab2655a0 R09: ffff9e798125f898
[  108.267914] RBP: ffff8ddb8a5b8d80 R08: 0000005648eba354 R09: 0000000000000000
[  108.270196] R10: 0000000000000001 R11: 000000002d2d2d2d R12: ffff9e798125f948
[  108.270197] R13: ffff9e798125fa1c R14: ffff8ddb8a5b8d80 R15: 7fffffffffffffff
[  108.273001] R10: 000000002d2d2d2d R11: 000000002d2d2d2d R12: ffff8ddb8a5b8ed4
[  108.276410] FS:  00007f605851b740(0000) GS:ffff8de250a80000(0000) knlGS:0000000000000000
[  108.280597] R13: 00000000000002ac R14: 00000000ffffff99 R15: ffff8ddb92561b80
[  108.282966] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  108.282967] CR2: 00007f053c039248 CR3: 0000000185850003 CR4: 0000000000f70ee0
[  108.286206] FS:  0000000000000000(0000) GS:ffff8de250a00000(0000) knlGS:0000000000000000
[  108.289701] PKRU: 55555554
[  108.289702] Call Trace:
[  108.289704]  <TASK>
[  108.293977] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  108.297562]  sock_alloc_send_pskb+0x20c/0x240
[  108.301494] CR2: 00007f053c03a168 CR3: 0000000184394002 CR4: 0000000000f70ef0
[  108.301495] PKRU: 55555554
[  108.306464]  __ip_append_data.isra.0+0x96f/0x1040
[  108.309441] Call Trace:
[  108.309443]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  108.314927]  <IRQ>
[  108.314928]  sock_wfree+0x1c7/0x1d0
[  108.318078]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  108.320276]  skb_release_head_state+0x32/0x90
[  108.324812]  ip_make_skb+0xf6/0x130
[  108.327188]  skb_release_all+0x16/0x40
[  108.330775]  ? udp_sendmsg+0x9f3/0xcb0
[  108.332626]  napi_consume_skb+0x48/0xf0
[  108.334134]  ? xfrm_lookup_route+0x23/0xb0
[  108.344285]  igc_poll+0x787/0x1620 [igc]
[  108.346659]  udp_sendmsg+0x9f3/0xcb0
[  108.360010]  ? ttwu_do_activate+0x40/0x220
[  108.365237]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  108.366744]  ? try_to_wake_up+0x289/0x5e0
[  108.376987]  ? sock_sendmsg+0x81/0x90
[  108.395698]  ? __pfx_process_timeout+0x10/0x10
[  108.395701]  sock_sendmsg+0x81/0x90
[  108.409052]  __napi_poll+0x29/0x1c0
[  108.414279]  ____sys_sendmsg+0x284/0x310
[  108.419507]  net_rx_action+0x257/0x2d0
[  108.438216]  ___sys_sendmsg+0x7c/0xc0
[  108.439723]  __do_softirq+0xc1/0x2a8
[  108.444950]  ? finish_task_switch+0xb4/0x2f0
[  108.452077]  irq_exit_rcu+0xa9/0xd0
[  108.453584]  ? __schedule+0x372/0xd00
[  108.460713]  common_interrupt+0x84/0xa0
[  108.467840]  ? clockevents_program_event+0x95/0x100
[  108.474968]  </IRQ>
[  108.482096]  ? do_nanosleep+0x88/0x130
[  108.489224]  <TASK>
[  108.489225]  asm_common_interrupt+0x26/0x40
[  108.496353]  ? __rseq_handle_notify_resume+0xa9/0x4f0
[  108.503478] RIP: 0010:cpu_idle_poll+0x2c/0x100
[  108.510607]  __sys_sendmsg+0x5d/0xb0
[  108.518687] Code: 05 e1 d9 c8 00 65 8b 15 de 64 85 55 85 c0 7f 57 e8 b9 ef ff ff fb 65 48 8b 1c 25 00 cc 02 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 77 63 cd 00 85 c0 75 ed e8 ce ec ff ff
[  108.525817]  do_syscall_64+0x44/0xa0
[  108.531563] RSP: 0018:ffffffffab203e70 EFLAGS: 00000202
[  108.538693]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[  108.546775]
[  108.546777] RIP: 0033:0x7f605862b7f7
[  108.549495] RAX: 0000000000000001 RBX: ffffffffab20c940 RCX: 000000000000003b
[  108.551955] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  108.554068] RDX: 4000000000000000 RSI: 000000002da97f6a RDI: 00000000002b8ff4
[  108.559816] RSP: 002b:00007ffc99264058 EFLAGS: 00000246
[  108.564178] RBP: 0000000000000000 R08: 00000000002b8ff4 R09: ffff8ddb01554c80
[  108.571302]  ORIG_RAX: 000000000000002e
[  108.571303] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f605862b7f7
[  108.574023] R10: 000000000000015b R11: 000000000000000f R12: ffffffffab20c940
[  108.574024] R13: 0000000000000000 R14: ffff8de26fbeef40 R15: ffffffffab20c940
[  108.578727] RDX: 0000000000000000 RSI: 00007ffc992640a0 RDI: 0000000000000003
[  108.578728] RBP: 00007ffc99264110 R08: 0000000000000000 R09: 175f48ad1c3a9c00
[  108.581187]  do_idle+0x62/0x230
[  108.585890] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc992642d8
[  108.585891] R13: 00005577814ab2ba R14: 00005577814addf0 R15: 00007f605876d000
[  108.587920]  cpu_startup_entry+0x1d/0x20
[  108.591422]  </TASK>
[  108.596127]  rest_init+0xc5/0xd0
[  108.600490] ---[ end trace 0000000000000000 ]---

Test Setup:

DUT:
- Change mac address on DUT Side. Ensure NIC not having same MAC Address
- Running udp_tai on DUT side. Let udp_tai running throughout the test

Example:
./udp_tai -i enp170s0 -P 100000 -p 90 -c 1 -t 0 -u 30004

Host:
- Perform link up/down every 5 second.

Result:
Kernel panic will happen on DUT Side.

Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

zswap: do not shrink if cgroup may not zswap

Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy. If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.

However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage. This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.

As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.

More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.

This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.

[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes: f4840ccfca25 ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

page cache: fix page_cache_next/prev_miss off by one

Ackerley Tng reported an issue with hugetlbfs fallocate here[1].  The
issue showed up after the conversion of hugetlb page cache lookup code to
use page_cache_next_miss.  Code in hugetlb fallocate, userfaultfd and GUP
is now using page_cache_next_miss to determine if a page is present the
page cache.  The following statement is used.

present = page_cache_next_miss(mapping, index, 1) != index;

There are two issues with page_cache_next_miss when used in this way.
1) If the passed value for index is equal to the 'wrap-around' value,
   the same index will always be returned.  This wrap-around value is 0,
   so 0 will be returned even if page is present at index 0.
2) If there is no gap in the range passed, the last index in the range
   will be returned.  When passed a range of 1 as above, the passed
   index value will be returned even if the page is present.
The end result is the statement above will NEVER indicate a page is
present in the cache, even if it is.

As noted by Ackerley in [1], users can see this by hugetlb fallocate
incorrectly returning EEXIST if pages are already present in the file.  In
addition, hugetlb pages will not be included in core dumps if they need to
be brought in via GUP.  userfaultfd UFFDIO_COPY also uses this code and
will not notice pages already present in the cache.  It may try to
allocate a new page and potentially return ENOMEM as opposed to EEXIST.

Both page_cache_next_miss and page_cache_prev_miss have similar issues.
Fix by:
- Check for index equal to 'wrap-around' value and do not exit early.
- If no gap is found in range, return index outside range.
- Update function description to say 'wrap-around' value could be
  returned if passed as index.

[1] https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com/

Link: https://lkml.kernel.org/r/20230602225747.103865-2-mike.kravetz@oracle.com
Fixes: d0ce0e47b323 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ocfs2: check new file size on fallocate call

When changing a file size with fallocate() the new size isn't being
checked. In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes
this issue.

Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: add entry for John Keeping

Map my corporate address to my personal one, as I am leaving the
company.

Link: https://lkml.kernel.org/r/20230531144839.1157112-1-john@keeping.me.uk
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()

If 'aggr_interval' is smaller than 'sample_interval', max_nr_accesses in
damon_nr_accesses_to_accesses_bp() becomes zero which leads to divide
error, let's validate the values of them in damon_set_attrs() to fix it,
which similar to others attrs check.

Link: https://lkml.kernel.org/r/20230527032101.167788-1-wangkefeng.wang@huawei.com
Fixes: 2f5bef5a590b ("mm/damon/core: update monitoring results for new monitoring attributes")
Reported-by: syzbot+841a46899768ec7bec67@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=841a46899768ec7bec67
Link: https://lore.kernel.org/damon/00000000000055fc4e05fc975bc2@google.com/
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>