Wolfgang Denk [Sun, 17 Jul 2011 12:16:29 +0000 (12:16 +0000)]
ARM: remove broken "assabet" board
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: George G. Davis <gdavis@mvista.com>
Stefano Babic [Mon, 29 Aug 2011 22:49:54 +0000 (22:49 +0000)]
ARM: versatile: drop warnings
Drop warning: "passing argument 1 of 'get_ram_size'
discards qualifiers from pointer target type"
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Albert Aribaud <albert.u.boot@aribaud.net>
Stefano Babic [Fri, 26 Aug 2011 10:06:56 +0000 (12:06 +0200)]
IMX: scb9328: drop warnings
Drop warning: "passing argument 1 of 'get_ram_size'
discards qualifiers from pointer target type"
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Torsten Koschorrek <koschorrek@synertronixx.de>
Stefano Babic [Fri, 26 Aug 2011 09:54:05 +0000 (11:54 +0200)]
MX31: imx31_litekit: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Fri, 26 Aug 2011 09:44:52 +0000 (11:44 +0200)]
MX31: mx31ads: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 21:29:52 +0000 (23:29 +0200)]
MX5: mx51evk: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 09:00:32 +0000 (11:00 +0200)]
MX35: mx35pdk: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 08:59:33 +0000 (10:59 +0200)]
MX5: mx53loco: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <r64343@freescale.com>
Stefano Babic [Sun, 21 Aug 2011 08:58:22 +0000 (10:58 +0200)]
MX5: mx53evk: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <r64343@freescale.com>
Stefano Babic [Sun, 21 Aug 2011 08:57:53 +0000 (10:57 +0200)]
MX5: vision2: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 08:56:57 +0000 (10:56 +0200)]
MX5: mx53smd: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Stefano Babic [Sun, 21 Aug 2011 08:56:06 +0000 (10:56 +0200)]
MX5: mx53ard: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Stefano Babic [Sun, 21 Aug 2011 08:55:05 +0000 (10:55 +0200)]
MX25: zmx25: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Matthias Weisser <weisserm@arcor.de>
Stefano Babic [Sun, 21 Aug 2011 08:53:32 +0000 (10:53 +0200)]
MX5: efikamx: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
Stefano Babic [Sun, 21 Aug 2011 08:52:58 +0000 (10:52 +0200)]
MX31: QONG: make use of GPIO framework
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 08:52:04 +0000 (10:52 +0200)]
MX35: make use of GPIO framework for MX35 processor
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 08:51:06 +0000 (10:51 +0200)]
MX5: make use of GPIO framework for MX5 processor
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 08:50:06 +0000 (10:50 +0200)]
MX31: make use of GPIO framework for MX31 processor
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 08:48:19 +0000 (10:48 +0200)]
MX25: make use of GPIO framework for MX25 processor
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 21 Aug 2011 08:45:44 +0000 (10:45 +0200)]
IMX: uniform GPIO interface using GPIO framework
IMX processors has a slightly different interface
to access GPIOs and do not make use of the provided GPIO
framework. The patch substitutes mxc_ specific
functions and make use of the API in asm/gpio.h
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Wed, 17 Aug 2011 15:52:40 +0000 (17:52 +0200)]
MX: MX35 / MX5: uniform clock command with powerpc
There was already a command to show the processor clocks
for PowerPC (clocks). For i.MX, the "clockinfo" command
was introduce. The patch sets the same command name used on
PowerPC.
A nasty and not needed newline is also dropped in the help for
the command.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Tue, 2 Aug 2011 12:42:36 +0000 (14:42 +0200)]
MX35: MX35PDK: support additional RAM on CSD1
Modules on mx35pdk have additional 128MB
memory connected to CSD1.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Fri, 19 Aug 2011 03:28:10 +0000 (03:28 +0000)]
mx53: ddr3: Update DD3 initialization
Updated mx53 ddr3 script in order to align with the latest Freescale version from July 8, 2011:
-change ESDREF[REF_SEL]=01 (for 32KHz), from incorrect setting of 00 (64KHz)
-change DDR3 MR0 write to "setmem /32 0x63fd901c = 0x052080b0" from
"0x092080b0". This changes write recovery from 8 clocks to 6 clocks
(in line with ESDCFG1[tWR])
Signed-off-by: Lily Zhang <r58066@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
David Jander [Wed, 13 Jul 2011 21:11:53 +0000 (21:11 +0000)]
ARM: MX51: PLL errata workaround
This is a port of the official PLL errata workaround from Freescale to
mainline u-boot.
The PLL's in the i.MX51 processor can go out of lock due to a metastable
condition in an analog flip-flop when used at high frequencies.
This workaround implements an undocumented feature in the PLL (dither
mode), which causes the effect of this failure to be much lower (in terms
of frequency deviation), avoiding system failure, or at least decreasing
the likelihood of system failure.
Signed-off-by: David Jander <david@protonic.nl>
Stefano Babic [Mon, 29 Aug 2011 21:24:27 +0000 (21:24 +0000)]
ARM: versatilepb : drop warnings due to double definitions
CONFIG_ARCH_VERSATILE_PB is defined twice - drop
the define from config.h.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Aneesh V [Sun, 7 Aug 2011 20:05:45 +0000 (20:05 +0000)]
omap4: increase SRAM budget to fix build error
Signed-off-by: Aneesh V <aneesh@ti.com>
Cc: Dirk Behme <dirk.behme@googlemail.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Dirk Behme<dirk.behme@googlemail.com>
Aneesh V [Sat, 20 Aug 2011 21:40:26 +0000 (21:40 +0000)]
omap4: fix build warning due to signed unsigned comparison
Signed-off-by: Aneesh V <aneesh@ti.com>
Dirk Behme [Tue, 9 Aug 2011 07:52:57 +0000 (07:52 +0000)]
mkimage: Fix 'Unknown OMAP image type - 5'
Using mkimage with e.g.
tools/mkimage -A arm -T firmware -O u-boot -d u-boot.bin foo.img
gives a warning
"Unknown OMAP image type - 5"
while it seems that the image itself is created successfully.
This does come from the patch "mkimage: Add OMAP boot image support".
The method check_image_type in image_type_params is supposed to just
return success or failure. However, for omap it also calls fprintf:
static int omapimage_check_image_types(uint8_t type)
{
if (type == IH_TYPE_OMAPIMAGE)
return EXIT_SUCCESS;
else {
fprintf(stderr, "Unknown OMAP image type - %x", type);
return EXIT_FAILURE;
}
}
All the other image checkers and no others have this, so the fix is to
simply remove the fprintf.
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
CC: John Rigby <john.rigby@linaro.org>
CC: Aneesh V <aneesh@ti.com>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Aneesh V [Sun, 31 Jul 2011 20:30:53 +0000 (20:30 +0000)]
omap: fix gpio related build breaks
Signed-off-by: Aneesh V <aneesh@ti.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
Łukasz Majewski [Tue, 9 Aug 2011 23:18:54 +0000 (23:18 +0000)]
gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
This is a cosmetic patch, which is changing the gpio_ prefix to
s5p_gpio_.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap [Wed, 27 Jul 2011 20:36:30 +0000 (20:36 +0000)]
SMDKV310: MMC SPL: Remove unwanted dummy functions
Removed dummy functions in "mmc_spl/board/samsung/smdkv310/mmc_boot.c",
@mmc_boot.c
void do_undefined_instruction(struct pt_regs *pt_regs);
void do_software_interrupt(struct pt_regs *pt_regs);
void do_prefetch_abort(struct pt_regs *pt_regs);
void do_data_abort(struct pt_regs *pt_regs);
void do_not_used(struct pt_regs *pt_regs);
void do_fiq(struct pt_regs *pt_regs);
void do_irq(struct pt_regs *pt_regs);
not required as called conditionally in start.S
@start.S
\#ifdef CONFIG_SPL_BUILD
_undefined_instruction: .word _undefined_instruction
_software_interrupt: .word _software_interrupt
_prefetch_abort: .word _prefetch_abort
_data_abort: .word _data_abort
_not_used: .word _not_used
_irq: .word _irq
_fiq: .word _fiq
_pad: .word 0x12345678 /* now 16*4=64 */
\#else
_undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort
_data_abort: .word data_abort
_not_used: .word not_used
_irq: .word irq
_fiq: .word fiq
_pad: .word 0x12345678 /* now 16*4=64 */
\#endif
e.g.
undefined_instruction:
get_bad_stack
bad_save_user_regs
bl do_undefined_instruction
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Chander Kashyap [Mon, 25 Jul 2011 23:25:16 +0000 (23:25 +0000)]
SMDKV310: Fix undefined reference error
Fix buld error:
undefined reference to '__image_copy_end' and `save_boot_params'.
start.o: In function `_image_copy_end_ofs':
mmc_spl/board/samsung/smdkv310/start.S:44: undefined reference to `__image_copy_end'
start.o: In function `reset':
mmc_spl/board/samsung/smdkv310/start.S:137: undefined reference to `save_boot_params'
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap [Mon, 25 Jul 2011 23:04:07 +0000 (23:04 +0000)]
SMDKV310: Fix build error for smdkv310 board
Fix build error for smdkv310 board:
board/samsung/smdkv310/smdkv310.c:126: undefined reference to `gpio_set_pull'
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Łukasz Majewski [Fri, 15 Jul 2011 00:16:22 +0000 (00:16 +0000)]
gpio:samsung s5p_ suffix add for GPIO functions
This change is driven by need of general gpio_* functions,
which as their parameter are accepting the GPIO pin number, NOT
block and pin.
This makes the code alike to omap, and allows for using more
generic frameworks (e.g. software I2C).
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Anton Staaf [Thu, 30 Jun 2011 09:55:08 +0000 (09:55 +0000)]
mmc: S5P: Support DMA restarts at buffer boundaries
Currently if a DMA buffer straddles a buffer alignment boundary
(512KiB) then the DMA engine will pause and generate a DMA
interrupt. Since the DMA interrupt is not enabled it will hang
the MMC driver.
This patch adds support for restarting the DMA transfer. The
SYSTEM_ADDRESS register contains the next address that would have
been read/written when a boundary is hit. So we can read that
and write it back. The write triggers the resumption of the
transfer.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Tested-by : Jaehoon Chung <jh80.chung@samsung.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Dirk Behme [Mon, 11 Jul 2011 08:49:18 +0000 (08:49 +0000)]
SMDKV310: Fix host compilation of mkv310_image
Fix compilation of mkv310_image host tool
tools/mkv310_image.c: In function 'main':
tools/mkv310_image.c:67: error: 'S_IRUSR' undeclared (first use in this function)
tools/mkv310_image.c:67: error: (Each undeclared identifier is reported only once
tools/mkv310_image.c:67: error: for each function it appears in.)
tools/mkv310_image.c:67: error: 'S_IWUSR' undeclared (first use in this function)
tools/mkv310_image.c:67: error: 'S_IRGRP' undeclared (first use in this function)
tools/mkv310_image.c:67: error: 'S_IWGRP' undeclared (first use in this function)
tools/mkv310_image.c:67: error: 'S_IROTH' undeclared (first use in this function)
tools/mkv310_image.c:67: error: 'S_IWOTH' undeclared (first use in this function)
resulting from a 'make smdkv310_config'.
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Igor Grinberg [Tue, 16 Aug 2011 23:48:23 +0000 (23:48 +0000)]
arm: fix bd pointer dereference prior initialization
gd->bd pointer has been used prior been initialized.
Move the relevant code after the initialization.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Heiko Schocher [Thu, 2 Jun 2011 22:11:37 +0000 (22:11 +0000)]
arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Albert Aribaud <albert.u.boot@aribaud.net>
Jason Liu [Wed, 3 Aug 2011 00:05:47 +0000 (00:05 +0000)]
mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
CONFIG_L2_OFF is obsolete after the following commit:
e47f2db5371047eb9bcd115fee084e6a8a92a239
armv7: rename cache related CONFIG flags
Replace the cache related CONFIG flags with more meaningful
names. Following are the changes:
CONFIG_L2_OFF -> CONFIG_SYS_L2CACHE_OFF
Since imx5 does not provide L2 cache operations(Enable/Disable)
Simply remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc:Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Thu, 28 Jul 2011 17:28:13 +0000 (19:28 +0200)]
MX31: removed warnings due to clock.h
Signed-off-by: Stefano Babic <sbabic@denx.de>
Linus Walleij [Fri, 12 Aug 2011 00:28:57 +0000 (00:28 +0000)]
integrator: convert to new build system
This deletes the integrator split_by_variant.sh script and
defines a number of unique board types for the core modules
that are meaningful to support for the Integrator AP/CP, i.e.
the ones that did not just say "unsupported core module" in
split_by_variant.sh. If more core modules need to be supported
they are easy to add.
We delete all the old cruft in Makefile and MAKEALL that was
working around the old way of building boards. We create a
unique config file per board to satisfy the build system, but
they are just oneliners that include the existing
integratorap.h and integratorcp.h configs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 25 Jul 2011 01:52:00 +0000 (01:52 +0000)]
integratorcp: make the board compile
This defines the requires CONFIG_SYS_* variables to make the
Integrator CP board compile.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 25 Jul 2011 01:51:37 +0000 (01:51 +0000)]
integratorap: remove hardcoded 32MB memory cmdline
The default configuration for the Integrator AP forces memory to be
32 MB on the command line to the kernel, while we have perfect
information and detection of the actual memory size in the ATAGs.
Delete the confusion.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 25 Jul 2011 01:51:08 +0000 (01:51 +0000)]
integratorap: support some rudimentary commands
This adds support for a subset of the default commands for the
Integrator, however since the card does not have Ethernet (unless
you plug in a PCI card) we can not use the default command set.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 25 Jul 2011 01:50:47 +0000 (01:50 +0000)]
integratorap: support the hush shell
Give us some kind of sane shell environment so the bootloader can
be used.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 25 Jul 2011 01:50:08 +0000 (01:50 +0000)]
integratorap: support relocation
The integrator board was apparently never converted over to support
relocation until now. After this the integrator u-boot both compiles
and boots on the Integrator AP.
This also fixes the SDRAM memory size detection.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 25 Jul 2011 01:49:36 +0000 (01:49 +0000)]
integratorap: make the compile work again
The integratorap/cp config for u-boot was outdated and would not
even compile, so fix the obvious missing bits for it to start
building. After this "make ap920t_config/make all" starts working
again.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Matthias Weisser [Sun, 22 May 2011 23:06:50 +0000 (23:06 +0000)]
arm: lib: memcpy: Do not copy to same address
In some cases (e.g. bootm with a elf payload which is already at the right
position) there is a in place copy of data to the same address. Catching this
saves some ms while booting.
Signed-off-by: Matthias Weisser <weisserm@arcor.de>
Igor Grinberg [Sun, 3 Jul 2011 23:00:21 +0000 (23:00 +0000)]
arm: omap: innovator: use common code for machine type
Innovator and H2 boards used machine_is_* macros for setting the machine
type. These macros are expanded in compile time and thus leaves
unreachable code (though gcc might optimize it).
Switch them to use common code for machine type setting.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Igor Grinberg [Sun, 3 Jul 2011 23:00:20 +0000 (23:00 +0000)]
arm: nvidia and smdk6400: use common code for machine type
NVIDIA boards and Samsung SMDK6400 already use a local variant of
CONFIG_MACH_TYPE option.
Switch to use the new common code.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Dirk Behme [Fri, 5 Aug 2011 20:48:32 +0000 (20:48 +0000)]
MAKEALL ARMv7: Use boards.cfg
Use the boards from boards.cfg for building ./MAKEALL ARMV7.
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Thomas Petazzoni [Thu, 4 Aug 2011 11:08:50 +0000 (11:08 +0000)]
atmel: Update support of board AT91SAM9M10G45-EK to new style
Based on earlier work by Alex Waterman <awaterman@dawning.com>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reinhard Meyer [Thu, 4 Aug 2011 20:56:11 +0000 (20:56 +0000)]
AT91: fix at91sam9g45.h to include USB Host defines
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Asen Dimov [Wed, 8 Jun 2011 22:01:37 +0000 (22:01 +0000)]
make pm9g45 buildable for v2011.06 release
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
changed at91_serial_hw_init to at91_seriald_hw_init
Asen Dimov [Wed, 8 Jun 2011 22:01:16 +0000 (22:01 +0000)]
make pm9263 buildable for v2011.06 release
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Thomas Petazzoni [Thu, 4 Aug 2011 08:53:29 +0000 (08:53 +0000)]
atmel: update at91sam9m10g45 SoC support to new style
Based on earlier work by Alex Waterman <awaterman@dawning.com>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Asen Dimov [Tue, 26 Jul 2011 04:48:41 +0000 (04:48 +0000)]
pm9261: compiles with the AT91 reworked scheme
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Thomas Petazzoni [Thu, 4 Aug 2011 02:48:56 +0000 (02:48 +0000)]
tny_a9260/tny_a9g20: update board to the new AT91 organization
Cc: Albin Tonnerre <tonnerrealbin@gmail.com>
CC: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Thu, 4 Aug 2011 02:22:20 +0000 (02:22 +0000)]
sbc35_a9g20: update board to the new AT91 organization
Cc: Albin Tonnerre <tonnerrealbin@gmail.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Removed SBC35 from MAKEALL
Matthias Fuchs [Tue, 19 Jul 2011 01:56:06 +0000 (01:56 +0000)]
at91: reworked support for meesc board
The meesc board support was broken. Within this opportunity, I completely
reworked the board files.
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Signed-off-by: Matthias Fuchs <Matthias.Fuchs@esd.eu>
Wolfgang Denk [Fri, 26 Aug 2011 10:27:58 +0000 (10:27 +0000)]
MPC8xx: fix build problem for ETX094 board
Commit 7616e78 "Add Ethernet hardware MAC address framework to usbnet"
increased the code size and broke building for the ETX094 board.
Adjust the linker script to make it build again.
While we are at it, remove unused u-boot.lds.debug
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 24 Jul 2011 21:39:10 +0000 (21:39 +0000)]
phy.c: make less verbose - turn printf() into debug()
The PHY driver was too verbose and corrupted the boot message display
like this:
...
Net: TSEC0 connected to Marvell 88E1111S
TSEC1 connected to Marvell 88E1111S
TSEC0, TSEC1
...
Turn printf() into debug() so we het the expected output again:
...
Net: TSEC0, TSEC1
...
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Fri, 26 Aug 2011 13:55:03 +0000 (15:55 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
* 'master' of git://git.denx.de/u-boot-sh:
sh: add calling mmc_initialize in board.c
sh: sh7757lcr: Add KEEP order to start.o section
usb: r8a66597: Fix argument mistake of inl
sh: Clean up rsk7264 board settings
sh: sh2a: Add sh2a optimize to config.mk
sh: Fix rsk7203 alignment problem
sh: Add support for SH2A freestanding build
sh: Add Renesas rsk7264 board
Wolfgang Denk [Fri, 26 Aug 2011 13:54:14 +0000 (15:54 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ubi
* 'master' of git://git.denx.de/u-boot-ubi:
ubifs: Fix bad free() sequence in ubifs_finddir()
Yoshihiro Shimoda [Tue, 5 Jul 2011 08:18:38 +0000 (17:18 +0900)]
sh: add calling mmc_initialize in board.c
Some SH have MMC controller. So, if we need it, we have to call
the mmc_initialize().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Yoshihiro Shimoda [Tue, 5 Jul 2011 08:15:16 +0000 (17:15 +0900)]
sh: sh7757lcr: Add KEEP order to start.o section
The sh7757lcr has a local u-boot.lds because the sh7757lcr is only
supported the SPI booting.
This patch refers from the commit "sh: Add KEEP order to start.o section"
(commit ID:
b52da2aed8c2c388661f369052a97d5b5c9ed00a).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Mon, 27 Jun 2011 07:07:37 +0000 (16:07 +0900)]
usb: r8a66597: Fix argument mistake of inl
Fail in build, because argument of inl used in r8a66597_read_fifo is wrong.
r8a66597.h:441:35: error: macro "inl" passed 2 arguments, but takes just 1
In file included from r8a66597-hcd.c:25:
r8a66597.h: In function ‘r8a66597_read_fifo’:
r8a66597.h:441: error: ‘inl’ undeclared (first use in this function)
r8a66597.h:441: error: (Each undeclared identifier is reported only once
r8a66597.h:441: error: for each function it appears in.)
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Phil Edworthy [Thu, 9 Jun 2011 15:22:43 +0000 (16:22 +0100)]
sh: Clean up rsk7264 board settings
Adjusted default settings so that we can boot zImages and uImages.
Removed unused settings, use default commands and where possible
calculate all other settings.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Thu, 9 Jun 2011 06:03:34 +0000 (15:03 +0900)]
sh: sh2a: Add sh2a optimize to config.mk
Only the optimization of sh2 had been supported up.
This adds the optimization of sh2a.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Phil Edworthy [Tue, 31 May 2011 08:51:42 +0000 (01:51 -0700)]
sh: Fix rsk7203 alignment problem
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Phil Edworthy [Thu, 2 Jun 2011 22:15:27 +0000 (22:15 +0000)]
sh: Add support for SH2A freestanding build
SH2A toolchains often only provide an fdpic version of libgcc. This
can't be used with bare-metal software like U-Boot, so this patch
provides the necessary functions extracted from libgcc.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Phil Edworthy [Wed, 1 Jun 2011 06:35:13 +0000 (07:35 +0100)]
sh: Add Renesas rsk7264 board
The rsk7264 (also know as rsk2+sh7264) is an SH2A based board
with 64MB NAND flash and 64MB SDRAM. It is very similar to the
rsk7203 board.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Wolfgang Denk [Thu, 28 Jul 2011 13:27:22 +0000 (15:27 +0200)]
ubifs: Fix bad free() sequence in ubifs_finddir()
Free private_data member element before freeing file structure.
This was causing malloc to crash. Also remove unnecessary variable
assigments as file structure gets free'd as well.
Signed-off-by: Rod Boyce <uboot@teamboyce.co.uk>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Jason Cooper [Sun, 31 Jul 2011 20:09:58 +0000 (20:09 +0000)]
usb: increase non-bulk timeout for slow chipsets.
If you take a look at
96820a35, you'll see the original timeout was
CONFIG_SYS_HZ. Which is 1000. After the mentioned change, non-bulk timeout
was changed to 100. This causes timeout failures on the dreamplug platform
when trying to initialize the usb microsd reader.
Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Marek Vasut [Tue, 12 Jul 2011 00:16:46 +0000 (02:16 +0200)]
USB: Move USB_PRINTF() out of ifdef in usb_scan_devices()
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Marek Vasut [Tue, 12 Jul 2011 00:16:47 +0000 (02:16 +0200)]
USB: Set portnr so USB1.1 and 1.0 devices work on EHCI controllers
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Nobuhiro Iwamatsu [Mon, 11 Jul 2011 02:03:47 +0000 (11:03 +0900)]
usb: r8a66597: Fix argument mistake of inl
Fail in build, because argument of inl used in r8a66597_read_fifo is wrong.
r8a66597.h:441:35: error: macro "inl" passed 2 arguments, but takes just 1
In file included from r8a66597-hcd.c:25:
r8a66597.h: In function ‘r8a66597_read_fifo’:
r8a66597.h:441: error: ‘inl’ undeclared (first use in this function)
r8a66597.h:441: error: (Each undeclared identifier is reported only once
r8a66597.h:441: error: for each function it appears in.)
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Simon Glass [Mon, 13 Jun 2011 23:13:12 +0000 (16:13 -0700)]
Put common autoload code into auto_load() function
This is a small clean-up patch.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
Simon Glass [Mon, 13 Jun 2011 23:13:11 +0000 (16:13 -0700)]
Add documentation for USB Host Networking
This describes what it is for, devices supported, how to enable for your
board in U-Boot, setting up the server, and notes about MAC addresses.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
Simon Glass [Mon, 13 Jun 2011 23:13:10 +0000 (16:13 -0700)]
Add Ethernet hardware MAC address framework to usbnet
Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).
This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB device taking the MAC address of a built-in device or vice versa.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
Simon Glass [Mon, 13 Jun 2011 23:13:09 +0000 (16:13 -0700)]
Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter
The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support
for this, using the USB host network framework.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Eric Bénard <eric@eukrea.com>
Albert ARIBAUD [Thu, 4 Aug 2011 16:45:45 +0000 (18:45 +0200)]
Convert ISO-8859 files to UTF-8
There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Anatolij Gustschin [Mon, 1 Aug 2011 04:16:29 +0000 (04:16 +0000)]
mpc5200: digsy_mtc: fix extension board EEPROM I2C address for rev5
On newer rev5 hardware the extension board EEPROM I2C address
has been changed to 0x54. Make this I2C address configurable
depending on CONFIG_DIGSY_REV5 so that extention board presence
detection works correctly on newer hardware.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Heiko Schocher [Mon, 1 Aug 2011 04:01:43 +0000 (04:01 +0000)]
hwmon: do not init sensors on startup
The U-Boot Design Principles[1] clearly say:
Initialize devices only when they are needed within U-Boot, i.e. don't
initialize the Ethernet interface(s) unless U-Boot performs a download
over Ethernet; don't initialize any IDE or USB devices unless U-Boot
actually tries to load files from these, etc. (and don't forget to
shut down these devices after using them - otherwise nasty things may
happen when you try to boot your OS).
So, do not initialize and read the sensors on startup.
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Holger Brunck <holger.brunck@keymile.com>
Wolfgang Denk [Thu, 4 Aug 2011 21:05:07 +0000 (23:05 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
drivers/rtc: add Marvell Integrated RTC
Armada100: Add Board Support for Marvell GuruPlug-Display
Armada100: MFP macro naming correction
arm: auto gen asm-offsets.h for mb86r0x
spear: fix build errors for spear3xx/spear600 platforms
cosmetic: arm: lib/board.c: Coding Style cleanup
ARM: versatile: fix board support
SMDKV310: Enable device tree support
SMDKV310: MMC_SPL: Fix building when using "make O="
arm: a320: enable tagged list support
arm: a320: fix multiline comment style
ARMv7: u8500_href: Add missing header to fix compiler warning
Removed unused define, CONFIG_ARMV7.
avr32: add grasshopper (ICnova AP7000) board
AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings
MAKEALL: remove AT91 boards that are in boards.cfg
AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master
AT91: Board fix for AT91SAM9261-EK
AT91: SoC fix at91sam9261_matrix.h
AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master
AT91: change common at91sam9261 files to compile with new scheme
AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
README: fix arm920t/at91 path
net/eth.c: drop obsolete at91rm9200 support
README.at91-soc: remove AT91(RM9200) joining notice
a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
MAKEALL: remove obsolete at91rm9200 soc
ARM: remove obsolete at91rm9200
omap4: clock init support for omap4460
omap4: support TPS programming
omap: reuse omap3 gpio support in omap4
omap4: sdram init changes for omap4460
omap4: add omap4460 revision detection
mkimage: Add OMAP boot image support
omap: add MMC and FAT support to SPL
omap: add basic SPL support
armv7: start.S: fixes and enhancements for SPL
omap4: automatic sdram detection
omap4: calculate EMIF register values
omap4: add sdram init support
omap4: add clock support
omap4: add OMAP4430 revision check
omap4: cleanup pin mux data
omap4: utility function to identify the context of hw init
DA8xx: fix LPSC constants
DA8xx: switch an enum to defines for consistency
DA8xx: add MMC/SD controller addresses
DaVinci EMAC: declare function for all DA8xx CPUs
DA8xx: add generic GPIO driver
DaVinci: rename gpio_defs.h to gpio.h
omap3evm: eth: Include functions only when necessary
omap3evm: Update ethernet reset sequence for Rev.G board
omap3evm: eth: split function setup_net_chip
omap3: Include array definition only when it is used
omap730p2: fix build breaks
omap2420h4: fix build breaks
omap1610inn: fix build breaks
omap1510inn: fix build breaks
omap5912osk: fix build breaks
omap1610h2: fix build breaks
Anatolij Gustschin [Sat, 16 Jul 2011 20:28:23 +0000 (22:28 +0200)]
video: mb862xx: change controller detection message
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Anatolij Gustschin [Fri, 27 May 2011 14:08:20 +0000 (16:08 +0200)]
video: mb862xx: support Coral-PA controller
Add detection of Coral-PA and configure Coral CCF an MMR parameters
using CONFIG_SYS_MB862xx_CCF and CONFIG_SYS_MB862xx_MMR macros.
Use CCF and MMR parameters for Coral-P Eval. Board if the appropriate
macros weren't defined.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Timur Tabi [Thu, 26 May 2011 14:02:17 +0000 (09:02 -0500)]
video: Add SHARP LQ084S3LG01 LCD support on P1022DS
The SHARP LQ084S3LG01 is a TFT LCD used on the P1022DS (revision "C") board.
This device only supports 800x600 resolution, so if that resolution is selected,
assume that this is the device. The device is attached to the LVDS port
on the P1022DS board.
The existing 800x600 entry (for the PDM360NG board) is actually 800x480,
so we fix that. To support two different 800x resolutions, the Y-resolution
is now passed to fsl_diu_init() and both values are used to pick the proper
fb_videomode structure.
The data for the 800x600 video mode is originally from Jiang Yutang.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Jiang Yutang <b14898@freescale.com>
Jason Cooper [Thu, 4 Aug 2011 15:56:16 +0000 (21:26 +0530)]
drivers/rtc: add Marvell Integrated RTC
This driver can be used for kirkwood SoCs by enabling CONFIG_RTC_MV. Tested on
Global Scale Technologies Dreamplug.
Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
Ajay Bhargav [Thu, 4 Aug 2011 15:56:02 +0000 (21:26 +0530)]
Armada100: Add Board Support for Marvell GuruPlug-Display
This patch adds basic board support with DRAM and UART functionality
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
Acked-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Ajay Bhargav [Thu, 4 Aug 2011 15:36:44 +0000 (21:06 +0530)]
Armada100: MFP macro naming correction
MFP macros for UART3 updated.
Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
Albert ARIBAUD [Thu, 4 Aug 2011 16:59:59 +0000 (18:59 +0200)]
Matthias Weisser [Mon, 1 Aug 2011 05:11:52 +0000 (05:11 +0000)]
arm: auto gen asm-offsets.h for mb86r0x
auto gen asm-offsets.h for mb86r0x
Signed-off-by: Matthias Weisser <weisserm@arcor.de>
Shiraz Hashim [Sat, 11 Jun 2011 21:32:57 +0000 (21:32 +0000)]
spear: fix build errors for spear3xx/spear600 platforms
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Vipin Kumar <vipin.kumar@st.com>
Heiko Schocher [Fri, 15 Jul 2011 19:36:36 +0000 (19:36 +0000)]
cosmetic: arm: lib/board.c: Coding Style cleanup
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
cc: Albert Aribaud <albert.u.boot@aribaud.net>
cc: <macpaul@gmail.com>
cc: Wolfgang Denk <wd@denx.de>
Stefano Babic [Fri, 24 Jun 2011 03:04:38 +0000 (03:04 +0000)]
ARM: versatile: fix board support
Versatile board is used as example to run u-boot under qemu.
The patch fixes relocation for all versatile boards and adds
a versatileqemu target to be used under qemu.
Patch tested only under qemu, not on real boards.
Tested with QEMU emulator version 0.14.50.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Alessandro Rubini <rubini-list@gnudd.com>
CC: Loïc Minier <loic.minier@linaro.org>
Thomas Abraham [Fri, 3 Jun 2011 22:52:17 +0000 (22:52 +0000)]
SMDKV310: Enable device tree support
Enable passing a flattened device tree to the kernel.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Chander Kashyap [Thu, 2 Jun 2011 18:07:32 +0000 (18:07 +0000)]
SMDKV310: MMC_SPL: Fix building when using "make O="
Fixes dependency build error with "make O=" option.
"make O=" option is used to specify output directory.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Po-Yu Chuang [Mon, 18 Jul 2011 16:56:53 +0000 (16:56 +0000)]
arm: a320: enable tagged list support
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Po-Yu Chuang [Mon, 18 Jul 2011 16:55:39 +0000 (16:55 +0000)]
arm: a320: fix multiline comment style
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>