Brian Robbins [Fri, 12 May 2017 21:14:28 +0000 (14:14 -0700)]
Don't allow specification of needStack to EventPipeProvider when creating an event. (#11571)
dotnet bot [Fri, 12 May 2017 20:23:36 +0000 (13:23 -0700)]
Update CoreClr, CoreFx to preview2-25312-01, preview2-25312-03, respectively (#11544)
Brian Robbins [Fri, 12 May 2017 19:22:06 +0000 (12:22 -0700)]
Only call EventActivityIdControl ETW function on Windows. (#11549)
Atsushi Kanamori [Fri, 12 May 2017 15:22:52 +0000 (08:22 -0700)]
Delete non-shared version and switch over to shared version.
Jan Kotas [Fri, 12 May 2017 14:56:00 +0000 (07:56 -0700)]
Merge pull request dotnet/corert#3601 from dotnet/nmirror
Merge nmirror to master
Signed-off-by: dotnet-bot <dotnet-bot@microsoft.com>
Carol Eidt [Fri, 12 May 2017 18:04:23 +0000 (11:04 -0700)]
Merge pull request #10972 from hqueue/arm/ryujit/lsra
[Ryujit/ARM32] LSRA support for arm32 floating-point register allocation
Jarret Shook [Fri, 12 May 2017 18:00:57 +0000 (11:00 -0700)]
Merge pull request #11500 from dotnet-bot/from-tfs
Merge changes from TFS
Brian Robbins [Fri, 12 May 2017 17:51:31 +0000 (10:51 -0700)]
EventPipe Circular Buffer Support and Ability to Start/Stop Tracing (#11507)
Jarret Shook [Fri, 12 May 2017 16:40:00 +0000 (09:40 -0700)]
Merge pull request #11536 from jashook/green_arm64_ci
[Arm64] Disable new test regressions
jashook [Thu, 11 May 2017 22:54:44 +0000 (15:54 -0700)]
[Arm64] Disable new test regressions
Disable tests based on #11533, #11534.
Pat Gavlin [Fri, 12 May 2017 06:02:54 +0000 (23:02 -0700)]
Re-morph lclVar nodes after simplifying (ind (addr (lclVar))). (#11531)
Morph simplifies (ind (addr (lclVar))) if the type of the load matches
the type of the lclVar node. This simplification is not valid, however,
if the lclVar must be normalized upon load: in that case, the lclVar
node must be normalized appropriately as part of the transformation.
This change fixes the simplification to perform this normalization if
necessary by calling `fgMorphLclVar` on the result if the result is a
lclVar node.
Fixes issue #11508.
dotnet bot [Fri, 12 May 2017 03:35:41 +0000 (20:35 -0700)]
Update CoreFx to preview2-25311-04 (#11532)
Brian Sullivan [Fri, 12 May 2017 02:43:34 +0000 (19:43 -0700)]
Merge pull request #11528 from sdmaclea/PR-ARM64-Add-ldar-stlr-instrs
[Arm64] Add emitter support for ldar/stlr
Brian Sullivan [Fri, 12 May 2017 02:28:08 +0000 (19:28 -0700)]
Merge pull request #11468 from sdmaclea/PR-ARM64-3092
[Arm64] Use movn in instGen_Set_Reg_To_Imm
Morgan Brown [Fri, 12 May 2017 02:24:42 +0000 (19:24 -0700)]
Removes unneeded Serializable attributes from enums and delegates. They can be serialized without attributes and this will remove noise from future serialization changes. (#11535)
mskvortsov [Fri, 12 May 2017 01:32:11 +0000 (04:32 +0300)]
[RyuJIT/ARM32] Fix GT_NEG decomposition (#11495)
RyuJIT/ARM32: Fix GT_NEG decomposition.
Sujin Kim [Fri, 12 May 2017 01:26:23 +0000 (10:26 +0900)]
[RyuJIT/ARM32] Implement for GT_STORE_OBJ (#10721)
* Implement lowering for GT_STORE_OBJ
In #10657, I commented that the messages for NYI were printed about GT_STORE_OBJ on running the CodeGenBringUpTests.
'Lowering::LowerBlockStore(GenTreeBlk* blkNode)' method implementation is just copied.
but after lowering phase, in code generation, codegenarm.cpp, below would be used.
```cpp
blkNode->gtBlkOpKind = GenTreeBlk::BlkOpKindUnroll;
```
```cpp
blkNode->gtBlkOpKind = GenTreeBlk::BlkOpKindHelper;
```
```cpp
void CodeGen::genCodeForStoreBlk(GenTreeBlk* blkOp)
{
if (blkOp->gtBlkOpGcUnsafe)
{
getEmitter()->emitDisableGC();
}
bool isCopyBlk = blkOp->OperIsCopyBlkOp();
switch (blkOp->gtBlkOpKind)
{
case GenTreeBlk::BlkOpKindHelper:
if (isCopyBlk)
{
genCodeForCpBlk(blkOp);
}
else
{
genCodeForInitBlk(blkOp);
}
break;
case GenTreeBlk::BlkOpKindUnroll:
if (isCopyBlk)
{
genCodeForCpBlkUnroll(blkOp);
}
else
{
genCodeForInitBlkUnroll(blkOp);
}
break;
default:
unreached();
}
if (blkOp->gtBlkOpGcUnsafe)
{
getEmitter()->emitEnableGC();
}
}
```
'genCodeForCpBlk' and 'genCodeForInitBlk' are implemented in ARM/ARM64 by MEMCPY/MEMSET
but 'genCodeForCpBlkUnroll' and 'genCodeForInitBlkUnroll' are not implemented both ARM and ARM64.
Therefore those need to implement.
* Implement NYI : GT_STORE_OBJ is needed of write barriers implementation
It was copied from ARM64 and removed codes related with gc write barrier which doesn't support on ARM.
* Implement CodeGen::genCodeForCpObj
* Refactor some codes
* Use INS_OPTS_LDST_POST_INC option for post-indexing
When structure is copied, the results of asm codes have been strange.
IN0013: 000048 ldr r3, [r1+4]
IN0014: 00004A str r3, [r0+4]
IN0015: 00004C ldr r3, [r1+4]
IN0016: 00004E str r3, [r0+4]
It needs that the index would increment or the post-indexing.
So I use INS_OPTS_LDST_POST_INC option for post-indexing when the instruction is emitted.
* Fix conflicts
* Fix conflicts and Apply #11219
I want to merge genCodeForCpObj to codegenarmarch.cpp but the function has modified in #11219.
So I decided to keep the code divided now.
In future, If modifying the function on ARM is also needed, it would be able to modify.
* Fix conflicts
* Remove NYI
* Fix genCountBits assertion
Steve MacLean [Thu, 11 May 2017 23:59:50 +0000 (19:59 -0400)]
Comment per review
Brian Robbins [Thu, 11 May 2017 01:04:24 +0000 (18:04 -0700)]
Fix build.
Signed-off-by: dotnet-bot <dotnet-bot@microsoft.com>
Sujin Kim [Thu, 11 May 2017 23:13:33 +0000 (08:13 +0900)]
[RyuJIT/ARM32] Fix assertion in 'unreached' when using emitIns_R_L (#11486)
* [RyuJIT/ARM32] Fix assertion in 'unreached'
Now, All of CodeGenBringUpTests have failed.
message : Assertion failed 'unreached' in 'DomainNeutralILStubClass:IL_STUB_PInvoke(ref)'
I found the problem was caused by #11377 that 'genCodeForTreeNode' merged to codegenarmarch.cpp.
Swaroop Sridhar [Thu, 11 May 2017 20:49:17 +0000 (13:49 -0700)]
LinkBench: Report reduction as a ratio.
Report the linker size reduction metric as a ratio
(linked filesize / unlinked filesize) instead of as a percentage.
Jarret Shook [Thu, 11 May 2017 22:26:44 +0000 (15:26 -0700)]
Merge pull request #11423 from jashook/arm64_live_tests
Windows Arm64 - Build/Run tests in CI
jashook [Fri, 5 May 2017 18:10:12 +0000 (11:10 -0700)]
Windows Arm64 - Build/Run tests in CI
Build tests with arm64 runs and upload/run them to the arm64 test
machines.
Michelle McDaniel [Thu, 11 May 2017 19:28:28 +0000 (12:28 -0700)]
Handle ADC in x86 unwindLazyState (#11527)
When we add PGO instrumentation to coreclr, the instrumentation injects
PUSH, MOV, ADD, ADC, POP into the prolog to mark the function entry. This
causes a crash because we do not currently handle ADC instructions in
unwindLazyState. This change adds support for ADC, which uses the normal
DecodeRM code we already have in place.
Jan Kotas [Thu, 11 May 2017 18:45:38 +0000 (11:45 -0700)]
Add back private BadImageFormatException constructor called by the VM (#11523)
Also removed rethrowing of an exception inside AssemblyName.GetAssemblyName that sometimes resulted into two identical exceptions getting nested into each other.
Fixes #11499
Sepideh Khoshnood [Thu, 11 May 2017 18:45:06 +0000 (11:45 -0700)]
Fix AssemblyName version (#11505)
* Fix AssemblyName.FullName
* Use canonicalized version instead of Version.ToString
[Arm64] Fixup stlr instrs
[Arm64] Add emitter support for ldar/stlr
[Arm64] Fix instGen_Set_Reg_To_Imm per review
Noah Falk [Thu, 11 May 2017 03:29:30 +0000 (20:29 -0700)]
Merge pull request #11437 from mjsabby/eventpipetoprofilerapi
Add dynamic method unload event to Profiler API
Swaroop Sridhar [Wed, 10 May 2017 22:25:53 +0000 (15:25 -0700)]
This change has the following improvements to LinkBench
1. Move the testing to the latest version of ILLink package
(for all benchmarks except for Roslyn, which is still on netcoreapp1.1)
2. Support for LinkBench to run individual benchmarks in the suite --
helps local testing.
3. Support for running without clean, cloning, build etc --
for local runs during continuous development.
4. Support to obtain the correct version(s) of DotNet CLI required to run
the benchmarks
5. Get-Crossgen.ps1 is required to crossgen MusicStore binaries (before/after linking).
Since it was recently dropped from JitBench repo, it is added to linkBench as an asset.
6. Add the --perf:runid parameter to generate output file names suitable
to upload the results to BenchView.
Mukul Sabharwal [Thu, 11 May 2017 01:41:13 +0000 (18:41 -0700)]
Remove eventpipe stuff left from prev commit
Mukul Sabharwal [Thu, 11 May 2017 01:39:37 +0000 (18:39 -0700)]
add prebuilt file
Mukul Sabharwal [Thu, 11 May 2017 01:37:58 +0000 (18:37 -0700)]
Remove EventPipeProfiler due to time constraints
Alex Ghiondea [Wed, 10 May 2017 23:45:01 +0000 (16:45 -0700)]
Allow multiple SetData calls on AppDomain (#11496)
* Allow multiple SetData calls on AppDomain
* Remove restriction from GetData and remove now-dead code Locate
* Remove LoaderOptimization check since it is not used on CoreCLR
Brian Robbins [Wed, 10 May 2017 22:11:28 +0000 (15:11 -0700)]
Re-Factor EventSource to Support Writing to EventPipe (#11435)
Re-Factor EventSource to Support Writing to EventPipe.
Brian Sullivan [Wed, 10 May 2017 20:50:19 +0000 (13:50 -0700)]
Merge pull request #11478 from sdmaclea/PR-ARM64-9711
[Arm64] Support GTF_IND_VOLATILE
Jose Perez Rodriguez [Wed, 10 May 2017 20:23:28 +0000 (13:23 -0700)]
Add version.txt to the coreclr transport package (#11497)
* Add version.txt to the coreclr transport package
* PR Feedback
Drew Scoggins [Wed, 10 May 2017 20:07:12 +0000 (13:07 -0700)]
Merge pull request #11448 from DrewScoggins/AddPriority
Launch perf process with high priority
dotnet-bot [Wed, 10 May 2017 19:43:11 +0000 (12:43 -0700)]
Renable building frankenjit
[tfs-changeset: 1657926]
Jonghyun Park [Wed, 10 May 2017 19:32:33 +0000 (12:32 -0700)]
[ARM/Linux] Enable build with FEATURE_DBGIPC=0 (#11254)
* [ARM/Linux] Enable build with FEATURE_DBGIPC=0
* Replace HAVE_ALIGNED_MALLOC with SUPPORT_LOCAL_DEBUGGING
[Arm64] Revise GTF_IND_VOLATILE per comments
Jan Vorlicek [Wed, 10 May 2017 16:32:42 +0000 (18:32 +0200)]
Fix clang version detection in src/pal/tools/gen-buildsys-clang.sh (#11398)
The version detection that was added recently for the purpose of selecting
optimization options for ARM builds was not working properly when the
clang binary doesn't have version in its name. This resulted in syntax
error being reported on OSX and some Linux distros:
/Users/janvorli/git/coreclr/src/pal/tools/gen-buildsys-clang.sh:
line 162: : /usr/bin/clang: syntax error: operand expected (error token is "/usr/bin/clang")
Tarek Mahmoud Sayed [Wed, 10 May 2017 15:38:20 +0000 (08:38 -0700)]
Update the License to MIT for coreclr repo (#11482)
Jonghyun Park [Wed, 10 May 2017 15:10:22 +0000 (08:10 -0700)]
Allow users to enable automatic NI bind fallback via command-line (#11485)
* Add FEATURE_NI_BIND_FALLBACK support
* Fix incorrect variable setup
* Negate the check condition
* Use WIN32 instead of FEATURE_PAL
* Check WIN32 first, and FEATURE_NI_BIND_FALLBACK later
Pat Gavlin [Wed, 10 May 2017 13:56:57 +0000 (06:56 -0700)]
Merge pull request #11484 from pgavlin/DisableLongRunningTests
Disable a few long-running tests.
dotnet bot [Wed, 10 May 2017 05:20:44 +0000 (22:20 -0700)]
Update CoreFx to preview2-25310-01 (#11483)
Pat Gavlin [Wed, 10 May 2017 03:41:05 +0000 (20:41 -0700)]
Disable a few long-running tests.
These tests consistently time out under GC stress or heap verification.
Each disabled test is known to complete successfully given adequate
time.
Mike McLaughlin [Wed, 10 May 2017 02:14:09 +0000 (19:14 -0700)]
Fix lldbplugin to properly build with lldb 3.9. (#11480)
Sergey Andreenko [Tue, 9 May 2017 21:11:24 +0000 (14:11 -0700)]
[x86, R2R] Exclude DevDiv_278523 because it fails in R2R
Look at #11476 for the description.
Joseph Tremoulet [Tue, 9 May 2017 23:36:14 +0000 (19:36 -0400)]
Merge pull request #11465 from JosephTremoulet/StaticHoist
Stop hoisting statics above cctors
Brian Sullivan [Tue, 9 May 2017 23:11:33 +0000 (16:11 -0700)]
Merge pull request #11351 from sdmaclea/PR-ARM64-RRSS-SSRR
[Arm64] Add emitIns_R_R_S_S & emitIns_S_S_R_R
Sergey Andreenko [Tue, 9 May 2017 20:24:37 +0000 (13:24 -0700)]
delete tabs from the exclude list
Joseph Tremoulet [Tue, 9 May 2017 02:30:04 +0000 (22:30 -0400)]
Stop hoisting statics above cctors
Extend the logic in optLoopHoist around `CLS_VAR` nodes to ensure we don't
hoist any tree that contains a `CLS_VAR` for a field with the flag
`CORINFO_FLG_FIELD_INITCLASS` set, unless we also (identify and) hoist the
corresponding static init helper call. The previous logic was
insufficient in that it blocked hoisting of singleton `CLS_VAR` nodes, but
not hoisting of trees that contain `CLS_VAR` nodes as sub-trees.
Add flag `GTF_FLD_INITCLASS`/`GTF_CLS_VAR_INITCLASS` so that optLoopHoist
can recall which fields are paired with static init helper calls, and only
block the hoisting of their trees.
Fixes #10780.
[Arm64] Support GTF_IND_VOLATILE
Addresses #9711 for arm64
Sergey Andreenko [Tue, 9 May 2017 19:07:20 +0000 (12:07 -0700)]
Replace tabs with spaces.
Sergey Andreenko [Tue, 9 May 2017 18:00:08 +0000 (11:00 -0700)]
Return DevDiv_255294 test to the exclude list for x86
Because it causes out of memory exception in crossgen mode.
Koundinya Veluri [Tue, 9 May 2017 20:56:40 +0000 (13:56 -0700)]
Fix static analysis issues (#11466)
Fix static analysis issues
Bruce Forstall [Tue, 9 May 2017 19:05:20 +0000 (12:05 -0700)]
Merge pull request #11406 from sdmaclea/PR-ARM64-ENABLE-FEATURE_TAILCALL_OPT
[Arm64] Enable FEATURE_TAILCALL_OPT
Jan Vorlicek [Tue, 9 May 2017 18:30:59 +0000 (20:30 +0200)]
Stop loading crossgen-ed binaries at preferred address on Unix (#11467)
This change removes attempt to load crossgen-ed binaries at preferred
address on Unix and uses whatever address the mmap returns instead.
Pat Gavlin [Tue, 9 May 2017 18:10:00 +0000 (11:10 -0700)]
Fix issue #11446. (#11455)
This issue was a GC hole that was caused by bad IR produced by
recursivelty promoting a struct with the following form:
```
struct S
{
struct T
{
object o;
};
T t;
}
```
In this case, the recursive promotion logic created a single lclVar to
represent `S.t` and retyped it using the type of `T.o`, but did not
rewrite IR that treated the single lclVar as a struct (e.g. instances of
`lclFld/st.lclFld Vx` where `Vx` referred to the lclVar that represented
`S.t` were not rewritten an `lclVar/st.lclVar Vx`). This IR in
turn confused the incremental liveness used during code generation,
which caused the stack slot holding `o`'s value to die too early.
This change fixes codegen's incremental liveness to handle this case.
[Arm64] Use movn in instGen_Set_Reg_To_Imm
Reduces total generated instructions
Fixes #3092
dotnet bot [Tue, 9 May 2017 14:32:46 +0000 (07:32 -0700)]
Update CoreClr, CoreFx to preview2-25309-01, preview2-25309-01, respectively (#11427)
Jan Vorlicek [Tue, 9 May 2017 09:03:32 +0000 (11:03 +0200)]
Enable build on old Linux (#11414)
This change enables building coreclr on old Linux distros that
don't have PR_SET_PTRACER and don't have _xstate struct in the
standard sigcontext.h header.
Mukul Sabharwal [Sun, 7 May 2017 10:17:39 +0000 (03:17 -0700)]
Add an event pipe that pipes to the profiler apis
Tarek Mahmoud Sayed [Tue, 9 May 2017 01:03:05 +0000 (18:03 -0700)]
Avoid throwing in the globalization managed callbacks (#11454)
* Avoid throwing in the globalization managed callbacks
* Add Assert
Viktor Hofer [Tue, 9 May 2017 00:41:06 +0000 (17:41 -0700)]
FailFast stderr logging with stacktrace (#11397)
Jarret Shook [Mon, 8 May 2017 23:18:08 +0000 (16:18 -0700)]
Merge pull request #11457 from jashook/arm64_pri1_tests
[Arm64] For arm64 jobs build pri1 tests by default
Pat Gavlin [Mon, 8 May 2017 22:56:54 +0000 (15:56 -0700)]
Merge pull request #11451 from pgavlin/gh11447
Fix issue #11447.
jashook [Mon, 8 May 2017 22:41:12 +0000 (15:41 -0700)]
[Arm64] For arm64 jobs build pri1 tests by default
This relates to coreclr #11423, enabling pri1 tests to
be built.
Alex Ghiondea [Mon, 8 May 2017 22:14:02 +0000 (15:14 -0700)]
Add assembly level attribute on CoreLib (#11449)
Drew Scoggins [Mon, 8 May 2017 18:59:23 +0000 (11:59 -0700)]
Launch perf process with high priority
This change uses the stability prefix flag that was already in
run-xunit-perf to pass flags to set the affinity of the process to a
single processor and to run the process at high priority.
Mike McLaughlin [Mon, 8 May 2017 20:34:41 +0000 (13:34 -0700)]
Add the "createdump" to the linux runtime package. (#11441)
Pat Gavlin [Mon, 8 May 2017 19:17:42 +0000 (12:17 -0700)]
Fix issue #11447.
This issue was caused by the code for PInvoke frame initialization reading
from the stub argument register after it had been trashed by prior
instructions. This change fixes this issue by inserting the PInvoke
frame initialization at the beginning of the scratch block into which it
is inserted rather than at the end.
Note that a more correct fix here would be to represent the stub
argument as a lclVar rather than a physical register; that work is
tracked by #11450.
Koundinya Veluri [Mon, 8 May 2017 19:16:21 +0000 (12:16 -0700)]
Make CoreCLR work properly under PaX's RANDMMAP (#11382)
Make CoreCLR work properly under PaX's RANDMMAP
Issues:
- The ExecutableMemoryAllocator is used to attempt to map native images into a memory range near libcoreclr so that its helper table can use short relative addresses for jumps to libcoreclr
- RANDMMAP typically prevents mmap calls with a specific address from reserving memory at the requested address, so the executable memory allocator fails to reserve any memory. When Server GC is enabled, the large GC heap can exacerbate the issue by taking address space near libcoreclr.
- Native images are loaded far from libcoreclr, and now jump stub space needs to be allocated near the native image, but RANDMMAP typically prevents this too
- NGenReserveForJumpStubs is intended to reserve some memory near mapped native images for jump stubs, but that reservation is done with a separate mmap call in the same way as above and RANDMMAP typically prevents this too
- The JIT needs to allocate memory for code that may need to jump/call to a native image or libcoreclr, which may require jump stubs near the code that cannot be allocated. CodeHeapReserveForJumpStubs reserves space in code heap blocks without using a separate call to mmap, so this works, but without this environment variable by default there is still a good chance of failing.
- See https://github.com/dotnet/coreclr/blob/
56d550d4f8aec2dd40b72a182205d0a2463a1bc9/Documentation/design-docs/jump-stubs.md for more details
Fixes #8480
- It would be ideal to fix all of the above properly, such that there would never be a need to attempt reserving memory within a certain range. Since we're running out of time for 2.0, I figured the following simpler, temporary solution that should cover most of the practical cases, may be appropriate for 2.0.
- Extended ExecutableMemoryAllocator to reserve address space even when it cannot do so near libcoreclr
- Had ClrVirtualAllocWithinRange use the executable memory allocator to reserve memory for jump stubs when the requested range is satisfied
- This covers a maximum of ~2 GB of executable code and should cover most of the practical cases. Once this space is exhausted, under RANDMMAP, native images loaded later will fail, and for jitted code the environment variable above can be used.
Jarret Shook [Mon, 8 May 2017 19:14:18 +0000 (12:14 -0700)]
Merge pull request #11445 from jashook/fix_build_break
Add define for FEATURE_SIMD
Drew Scoggins [Mon, 8 May 2017 18:50:45 +0000 (11:50 -0700)]
Merge pull request #11443 from DrewScoggins/CopyFix
Fix copy error in perf script
Russell C Hadley [Mon, 8 May 2017 18:08:11 +0000 (11:08 -0700)]
Merge pull request #11231 from russellhadley/UpdateEHDoc
Update EH WriteThru doc with review feedback.
Russell Hadley [Wed, 26 Apr 2017 19:24:24 +0000 (12:24 -0700)]
Update doc with review feedback.
Factor in additional exception cases from Andy and fix some wording from
Joe.
jashook [Mon, 8 May 2017 16:30:24 +0000 (09:30 -0700)]
Add define for FEATURE_SIMD
This fixs a build break in the desktop product.
Drew Scoggins [Mon, 8 May 2017 17:19:05 +0000 (10:19 -0700)]
Use profile information to differentiate files
[Arm64] Revise per comments
[Arm64] Add emitIns_R_R_S_S
[Arm64] Add emitIns_S_S_R_R
Sebastian Lauber [Mon, 8 May 2017 16:08:27 +0000 (18:08 +0200)]
Minor typo corrected (#11444)
Drew Scoggins [Mon, 8 May 2017 06:26:42 +0000 (23:26 -0700)]
Change xcopy to copy
Drew Scoggins [Mon, 8 May 2017 05:09:20 +0000 (22:09 -0700)]
Fix copy error in perf script
When I merged the PR that enabled the lean runs I added another call to
our run script. This run script had an assumption that it would only
ever be called once and as such would try and copy two files that had
the same name. This would cause it to prompt to overwrite or not and
fail the run. This change makes each copy unique based on the
collection flags that were used for collection.
Justin Van Patten [Mon, 8 May 2017 03:42:41 +0000 (20:42 -0700)]
Make Debugger class static (#11439)
* Make Debugger class static
It's static in the .NET Standard and .NET Core refs, and in CoreRT's
implementation, so make it static in the CoreCLR implementation as well.
Also, minor cleanup while making changes here.
Brian Robbins [Sat, 6 May 2017 19:36:08 +0000 (12:36 -0700)]
Log Events to EventPipe on Linux (#11433)
* Implement the EventPipe object model for providers and events.
* Plumb Runtime Events into EventPipe (#11145)
Plumb runtime ETW events into the EventPipe.
* Fix bug where all events except for SampleProfiler events were never enabled.
* Plumb EventPipeEventInstance through the EventPipe.
* Implement EventPipeFile and FastSerializer.
* Write event contents to the EventPipeFile.
* Only build EventPipe on Linux.
* Conditionally add a sentinel value marking event end.
* Send SampleProfiler events to the EventPipeFile.
* Fix provider ID printing to JSON file.
* Write the start date/time, timestamp, and clock frequency into the trace file.
* Support unloading of EventPipeProviders.
* Handle failure cases when we can't walk the stack or are shutting down.
* Fix a bug where we pass a null src pointer to memcpy.
Jan Kotas [Sat, 6 May 2017 18:03:27 +0000 (11:03 -0700)]
Delete dead code (#11431)
Jan Kotas [Sat, 6 May 2017 14:18:56 +0000 (07:18 -0700)]
Delete moved file
Jan Kotas [Sat, 6 May 2017 03:48:28 +0000 (20:48 -0700)]
Delete moved files and fix build breaks
Signed-off-by: dotnet-bot <dotnet-bot@microsoft.com>
Jan Kotas [Sat, 6 May 2017 03:32:38 +0000 (20:32 -0700)]
Move more files to shared CoreLib partition (#11429)
Justin Van Patten [Fri, 5 May 2017 23:56:49 +0000 (16:56 -0700)]
Remove ArrayList (#11426)
Also cleanup FEATURE_NONGENERIC_COLLECTIONS while on it.
Drew Scoggins [Fri, 5 May 2017 23:44:00 +0000 (08:44 +0900)]
Merge pull request #11428 from DrewScoggins/LeanRuns
Fix typo in perf.groovy
Drew Scoggins [Fri, 5 May 2017 23:07:27 +0000 (16:07 -0700)]
Fix typo in perf.groovy
Had a typo where I was passing deafult instead of default as a flag to
the collection harness. This fixes that.
Steve MacLean [Fri, 5 May 2017 23:16:37 +0000 (19:16 -0400)]
[Arm64/Unix] Enable FEATURE_USE_SOFTWARE_WRITE_WATCH_FOR_GC_HEAP (#11375)
* [Arm64/Unix] Enable FEATURE_USE_SOFTWARE_WRITE_WATCH_FOR_GC_HEAP
* [Arm64/Unix] Enable FEATURE_MANUALLY_MANAGED_CARD_BUNDLES
Sean Gillespie [Fri, 5 May 2017 22:57:25 +0000 (15:57 -0700)]
Add a GC Reliability Framework job to the CI (#11280)
* Add GC Reliability Framework CI job
* Three changes:
1) To address offline feedback, update the CI trigger phase document
and the GC testing instructions
2) Set the timeout for GC RF CI jobs to 24 hours, so they don't time
out (they will run for 15 hours by default)
3) Refactor "scenario == 'gc_reliability_framework' to its own method
so that new GC RF scenarios can easily and cleanly be added if
desired in the future
Jarret Shook [Fri, 5 May 2017 21:35:56 +0000 (14:35 -0700)]
Merge pull request #11425 from jashook/build_arm64_tests
Build tests for arm64 runs.
gbalykov [Fri, 5 May 2017 20:07:44 +0000 (23:07 +0300)]
Add compact entry points for ARM (#11109)