Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()

[ Upstream commit eb988e46da2e4eae89f5337e047ce372fe33d5b1 ]

The put_device() calls rmi_release_function() which frees "fn" so the
dereference on the next line "fn->num_of_irqs" is a use after free.
Move the put_device() to the end to fix this.

Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/706efd36-7561-42f3-adfa-dd1d0bd4f5a1@moroto.mountain
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume

[ Upstream commit e9bc4411548aaa738905d37851a0146c16b3bb21 ]

The suspend/resume functions currently utilize
clk_disable()/clk_enable() respectively which may be no-ops with certain
clock providers such as SCMI. Fix this to use clk_disable_unprepare()
and clk_prepare_enable() respectively as we should.

Fixes: 3a9f5957020f ("pwm: Add Broadcom BCM7038 PWM controller support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: sti: Reduce number of allocations and drop usage of chip_data

[ Upstream commit 2d6812b41e0d832919d72c72ebddf361df53ba1b ]

Instead of using one allocation per capture channel, use a single one. Also
store it in driver data instead of chip data.

This has several advantages:

 - driver data isn't cleared when pwm_put() is called
 - Reduces memory fragmentation

Also register the pwm chip only after the per capture channel data is
initialized as the capture callback relies on this initialization and it
might be called even before pwmchip_add() returns.

It would be still better to have struct sti_pwm_compat_data and the
per-channel data struct sti_cpt_ddata in a single memory chunk, but that's
not easily possible because the number of capture channels isn't known yet
when the driver data struct is allocated.

Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()")
Reported-by: George Stark <gnstark@sberdevices.ru>
Fixes: c97267ae831d ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20230705080650.2353391-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64

[ Upstream commit ba0fb4b48c19a2d2380fc16ca4af236a0871d279 ]

Issues were reported with commit 1cfb4d612127
("drm/amdgpu: put MQDs in VRAM") on an ADLINK Ampere
Altra Developer Platform (AVA developer platform).

Various ARM systems seem to have problems related
to PCIe and MMIO access.  In this case, I'm not sure
if this is specific to the ADLINK platform or ARM
in general.  Seems to be some coherency issue with
VRAM.  For now, just don't put MQDs in VRAM on ARM.

Link: https://lists.freedesktop.org/archives/amd-gfx/2023-October/100453.html
Fixes: 1cfb4d612127 ("drm/amdgpu: put MQDs in VRAM")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: alexey.klimov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/gfx10,11: use memcpy_to/fromio for MQDs

[ Upstream commit b3c942bb6c32a8ddc1d52ee6bc24b8cf732dddf4 ]

Since they were moved to VRAM, we need to use the IO
variants of memcpy.

Fixes: 1cfb4d612127 ("drm/amdgpu: put MQDs in VRAM")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: prevent noinc writes from clobbering cache

[ Upstream commit 984a4afdc87a1fc226fd657b1cd8255c13d3fc1a ]

Currently, noinc writes are cached as if they were standard incrementing
writes, overwriting unrelated register values in the cache. Instead, we
want to cache the last value written to the register, as is done in the
accelerated noinc handler (regmap_noinc_readwrite).

Fixes: cdf6b11daa77 ("regmap: Add regmap_noinc_write API")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20231101142926.2722603-2-ben.wolsieffer@hefring.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpupower: fix reference to nonexistent document

[ Upstream commit 6feb1a9641197ee630bf43b5c34ea1d9f8b4a0aa ]

This file was renamed from .txt to .rst and left a dangling reference.
Fix it.

Fixes: 151f4e2bdc7a ("docs: power: convert docs to ReST and rename to *.rst")
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: meson: always include meson sub-directory in Makefile

[ Upstream commit 94e27fbeca27d8c772fc2bc807730aaee5886055 ]

'meson' directory contains two separate drivers, so it should be added
to Makefile compilation hierarchy unconditionally, because otherwise the
meson-ao-cec-g12a won't be compiled if meson-ao-cec is not selected.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 4be5e8648b0c ("media: move CEC platform drivers to a separate directory")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()

[ Upstream commit 2a76e7679b594ea3e1b3b7fb6c3d67158114020d ]

Fix the build warnings that were detected by the linux-media
build scripts tool:

drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
In function 'mdp_path_config.isra':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
warning: 'ctx' may be used uninitialized [-Wmaybe-uninitialized]
      |                    out = CFG_COMP(MT8195, ctx->param, outputs[0]);
      |                                           ~~~^~~~~~~
drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h: note:
in definition of macro 'CFG_COMP'
      |         (IS_ERR_OR_NULL(comp) ? 0 : _CFG_COMP(plat, comp, mem))
      |                         ^~~~
drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c:
note: 'ctx' was declared here
      |         struct mdp_comp_ctx *ctx;
      |

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: using encoder device to alloc/free encoder memory

[ Upstream commit 56c0ac05a31a0bf525fddc300ea997356ad8146f ]

Need to use encoder device to allocate/free encoder memory when calling
mtk_vcodec_mem_alloc/mtk_vcodec_mem_free, or leading to below crash log
when test encoder with decoder device.

pc : dma_alloc_attrs+0x44/0xf4
lr : mtk_vcodec_mem_alloc+0x50/0xa4 [mtk_vcodec_common]
sp : ffffffc0209f3990
x29: ffffffc0209f39a0 x28: ffffff8024102a18 x27: 0000000000000000
x26: 0000000000000000 x25: ffffffc00c06e2d8 x24: 0000000000000001
x23: 0000000000000cc0 x22: 0000000000000010 x21: 0000000000000800
x20: ffffff8024102a18 x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000009 x16: ffffffe389736a98 x15: 0000000000000078
x14: ffffffe389704434 x13: 0000000000000007 x12: ffffffe38a2b2560
x11: 0000000000000800 x10: 0000000000000004 x9 : ffffffe331f07484
x8 : 5400e9aef2395000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000001 x4 : 0000000000000000 x3 : 0000000000000cc0
x2 : ffffff8024102a18 x1 : 0000000000000800 x0 : 0000000000000010
Call trace:
 dma_alloc_attrs+0x44/0xf4
 mtk_vcodec_mem_alloc+0x50/0xa4 [mtk_vcodec_common 2819d3d601f3cd06c1f2213ac1b9995134441421]
 h264_enc_set_param+0x27c/0x378 [mtk_vcodec_enc 772cc3d26c254e8cf54079451ef8d930d2eb4404]
 venc_if_set_param+0x4c/0x7c [mtk_vcodec_enc 772cc3d26c254e8cf54079451ef8d930d2eb4404]
 vb2ops_venc_start_streaming+0x1bc/0x328 [mtk_vcodec_enc 772cc3d26c254e8cf54079451ef8d930d2eb4404]
 vb2_start_streaming+0x64/0x12c
 vb2_core_streamon+0x114/0x158
 vb2_streamon+0x38/0x60
 v4l2_m2m_streamon+0x48/0x88
 v4l2_m2m_ioctl_streamon+0x20/0x2c
 v4l_streamon+0x2c/0x38
 __video_do_ioctl+0x2c4/0x3dc
 video_usercopy+0x404/0x934
 video_ioctl2+0x20/0x2c
 v4l2_ioctl+0x54/0x64
 v4l2_compat_ioctl32+0x90/0xa34
 __arm64_compat_sys_ioctl+0x128/0x13c
 invoke_syscall+0x4c/0x108
 el0_svc_common+0x98/0x104
 do_el0_svc_compat+0x28/0x34
 el0_svc_compat+0x2c/0x74
 el0t_32_sync_handler+0xa8/0xcc
 el0t_32_sync+0x194/0x198
Code: aa0003f6 aa0203f4 aa0103f5 f900

'Fixes: 01abf5fbb081c ("media: mediatek: vcodec: separate struct 'mtk_vcodec_ctx'")'
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx-jpeg: notify source chagne event when the first picture parsed

[ Upstream commit b833b178498dafa2156cfb6f4d3ce4581c21f1e5 ]

After gstreamer rework the dynamic resolution change handling, gstreamer
stop doing capture buffer allocation based on guesses and wait for the
source change event when available. It requires driver always notify
source change event in the initialization, even if the size parsed is
equal to the size set on capture queue. otherwise, the pipeline will be
stalled.

Currently driver may not notify source change event if the parsed format
and size are equal to those previously established, but it may stall the
gstreamer pipeline.

The link of gstreamer patch is
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437

Fixes: b4e1fb8643da ("media: imx-jpeg: Support dynamic resolution change")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Handle invalid encoder vsi

[ Upstream commit 19e2e01f30b5d2b448b5db097130486ea95af36f ]

Handle invalid encoder vsi in vpu_enc_init to ensure the encoder
vsi is valid for future use.

Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder")

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: verisilicon: Fixes clock list for rk3588 av1 decoder

[ Upstream commit 39377f84fb98561b86b645f0b7c33512eba7afaf ]

Mainlined RK3588 clock driver manage by itself the dependency between
aclk/hclk and their root clocks (aclk_vdpu_root/hclk_vdpu_root).
RK3588 av1 video decoder do not have to take care of it anymore so
remove them from the list and be compliant with yaml bindings description.

Fixes: 003afda97c65 ("media: verisilicon: Enable AV1 decoder on rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb-v2: af9035: fix missing unlock

[ Upstream commit f31b2cb85f0ee165d78e1c43f6d69f82cc3b2145 ]

Instead of returning an error, goto the mutex unlock at
the end of the function.

Fixes smatch warning:

drivers/media/usb/dvb-usb-v2/af9035.c:467 af9035_i2c_master_xfer() warn: inconsistent returns '&d->i2c_mutex'.
  Locked on  : 326,387
  Unlocked on: 465,467

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7bf744f2de0a ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cadence: csi2rx: Unregister v4l2 async notifier

[ Upstream commit b2701715301a49b53d05c7d43f3fedc3b8743bfc ]

The notifier is added to the global notifier list when registered. When
the module is removed, the struct csi2rx_priv in which the notifier is
embedded, is destroyed. As a result the notifier list has a reference to
a notifier that no longer exists. This causes invalid memory accesses
when the list is iterated over. Similar for when the probe fails.
Unregister and clean up the notifier to avoid this.

Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: imx219: Drop IMX219_REG_CSI_LANE_MODE from common regs array

[ Upstream commit ec80c606cca5f7a676febde10d63f5532f57e8e7 ]

The IMX219_REG_CSI_LANE_MODE is configured twice, once with a hardcoded
value in the imx219_common_regs registers array, and once with the value
appropriate for the system in imx219_configure_lanes(). The latter is
enough, drop the former.

Fixes: ceddfd4493b3 ("media: i2c: imx219: Support four-lane operation")
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: imx219: Replace register addresses with macros

[ Upstream commit 1c9083565a4698ff072f1209e9450ff6c305e2cc ]

Define macros for all the known registers used in the register arrays,
and use them to replace the numerical addresses. This improves
readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: ec80c606cca5 ("media: i2c: imx219: Drop IMX219_REG_CSI_LANE_MODE from common regs array")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: imx219: Convert to CCI register access helpers

[ Upstream commit 852798cc8a45362ea7667c754b8ca0575a680a45 ]

Use the new common CCI register access helpers to replace the private
register access helpers in the imx219 driver. This simplifies the driver
by reducing the amount of code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: ec80c606cca5 ("media: i2c: imx219: Drop IMX219_REG_CSI_LANE_MODE from common regs array")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cedrus: Fix clock/reset sequence

[ Upstream commit 36fe515c1a3cd5eac148e8a591a82108d92d5522 ]

According to H6 user manual, resets should always be de-asserted before
clocks are enabled. This is also consistent with vendor driver.

Fixes: d5aecd289bab ("media: cedrus: Implement runtime PM")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vidtv: mux: Add check and kfree for kstrdup

[ Upstream commit 1fd6eb12642e0c32692924ff359c07de4b781d78 ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Moreover, use kfree() in the later error handling in order to avoid
memory leak.

Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vidtv: psi: Add check for kstrdup

[ Upstream commit 76a2c5df6ca8bd8ada45e953b8c72b746f42918d ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: 7a7899f6f58e ("media: vidtv: psi: Implement an Event Information Table (EIT)")
Fixes: c2f78f0cb294 ("media: vidtv: psi: add a Network Information Table (NIT)")
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s3c-camif: Avoid inappropriate kfree()

[ Upstream commit 61334819aca018c3416ee6c330a08a49c1524fc3 ]

s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-jpegenc: Fix bug in JPEG encode quality selection

[ Upstream commit 0aeccc63f3bc4cfd49dc4893da1409402ee6b295 ]

The driver uses the upper-bound approach to decide the target JPEG
encode quality, but there's a logic bug that if the desired quality is
higher than what the driver can support, the driver falls back to using
the worst quality.

Fix the bug by assuming using the best quality in the beginning, and
with trivial refactor to avoid long lines.

Fixes: 45f13a57d813 ("media: platform: Add jpeg enc feature")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: handle firmware debug message

[ Upstream commit 6496617b2b06d7004a5cbd53d48f19567d6b018c ]

decoder firmware may notify host some debug message,
it can help analyze the state of the firmware in case of error

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: bttv: fix use after free error due to btv->timeout timer

[ Upstream commit bd5b50b329e850d467e7bcc07b2b6bde3752fbda ]

There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.

This bug is found by static analysis, it may be false positive.

Fix it by adding del_timer_sync invoking to the remove function.

cpu0                cpu1
                  bttv_probe
                    ->timer_setup
                      ->bttv_set_dma
                        ->mod_timer;
bttv_remove
  ->kfree(btv);
                  ->bttv_irq_timeout
                    ->USE btv

Fixes: 162e6376ac58 ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Fix a memory leak when ov5640_probe fails

[ Upstream commit 20290feaaeb76cc719921aad275ccb18662a7c3a ]

sensor->ctrls.handler is initialized in ov5640_init_controls(),
so when the sensor is not connected and ov5640_sensor_resume()
fails, sensor->ctrls.handler should be released, otherwise a
memory leak will be detected:

unreferenced object 0xc674ca80 (size 64):
   comm "swapper/0", pid 1, jiffies 4294938337 (age 204.880s)
   hex dump (first 32 bytes):
     80 55 75 c6 80 54 75 c6 00 55 75 c6 80 52 75 c6 .Uu..Tu..Uu..Ru.
     00 53 75 c6 00 00 00 00 00 00 00 00 00 00 00 00 .Su..........

Fixes: 85644a9b37ec ("media: ov5640: Use runtime PM")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: max9286: Fix some redundant of_node_put() calls

[ Upstream commit 0822315e46b400f611cba1193456ee6a5dc3e41d ]

This is odd to have a of_node_put() just after a for_each_child_of_node()
or a for_each_endpoint_of_node() loop. It should already be called
during the last iteration.

Remove these calls.

Fixes: 66d8c9d2422d ("media: i2c: Add MAX9286 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: fix vblank unchange issue when work at dvp mode

[ Upstream commit 8fc29e3c9f682d4ad9b0764d44ecc6c19b000051 ]

The value of V4L2_CID_VBLANK control is initialized to default vblank
value of 640x480 when driver probe. When OV5640 work at DVP mode, the
control value won't update and lead to sensor can't output data if the
resolution remain the same as last time since incorrect total vertical
size. So update it when there is a new value applied.

Fixes: bce93b827de6 ("media: ov5640: Add VBLANK control")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov13b10: Fix some error checking in probe

[ Upstream commit d66b45e1b082462c3e14528b83e18ee92362e456 ]

The "ret = " assignment was missing, so ov13b10_power_on() is not
checked for errors.  Add the assignment.

Fixes: 6e28afd15228 ("media: ov13b10: add PM control support based on power resources")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: verisilicon: Do not enable G2 postproc downscale if source is narrower than destination

[ Upstream commit 6e481d52d363218a3e6feb31694da74b38b30fad ]

In case of encoded input VP9 data width that is not multiple of macroblock
size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the
width is padded to be a multiple of macroblock size (for 1080x1920 frames,
that is 1088x1920).

The hantro_postproc_g2_enable() checks whether the encoded data width is
equal to decoded frame width, and if not, enables down-scale mode. For a
frame where input is 1080x1920 and output is 1088x1920, this is incorrect
as no down-scale happens, the frame is only padded. Enabling the down-scale
mode in this case results in corrupted frames.

Fix this by adjusting the check to test whether encoded data width is
greater than decoded frame width, and only in that case enable the
down-scale mode.

To generate input test data to trigger this bug, use e.g.:
$ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \
                 vp9enc ! matroskamux ! filesink location=/tmp/test.vp9
To trigger the bug upon decoding (note that the NV12 must be forced, as
that assures the output data would pass the G2 postproc):
$ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \
                 v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink

Fixes: 79c987de8b35 ("media: hantro: Use post processor scaling capacities")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hantro: Check whether reset op is defined before use

[ Upstream commit 88d4b23a629ebd34f682f770cb6c2116c851f7b8 ]

The i.MX8MM/N/P does not define the .reset op since reset of the VPU is
done by genpd. Check whether the .reset op is defined before calling it
to avoid NULL pointer dereference.

Note that the Fixes tag is set to the commit which removed the reset op
from i.MX8M Hantro G2 implementation, this is because before this commit
all the implementations did define the .reset op.

Fixes: 6971efb70ac3 ("media: hantro: Allow i.MX8MQ G1 and G2 to run independently")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx-jpeg: initiate a drain of the capture queue in dynamic resolution change

[ Upstream commit 1c2786632e20c8f0fd4004fae3b3490276e5e5da ]

The last buffer from before the change must be marked,
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.

Meanwhile if V4L2_DEC_CMD_STOP is sent before
the source change triggered,
we need to restore the is_draing flag after
the draining in dynamic resolution change.

Fixes: b4e1fb8643da ("media: imx-jpeg: Support dynamic resolution change")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()

[ Upstream commit 99e1241049a92dd3e9a90a0f91e32ce390133278 ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically.
Therefore, it needs to be freed, which is done by the driver core for
us once all references to the device are gone. Therefore, move the
dev_set_name() call immediately before the call device_register(), which
either succeeds (then the freeing will be done upon subsequent remvoal),
or puts the reference in the error call. Also, it is not unusual that the
return value of dev_set_name is not checked.

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message modified]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcmcia: ds: fix refcount leak in pcmcia_device_add()

[ Upstream commit 402ab979b29126068e0b596b641422ff7490214c ]

As the comment of device_register() says, it should use put_device()
to give up the reference in the error path. Then, insofar resources
will be freed in pcmcia_release_dev(), the error path is no longer
needed. In particular, this means that the (previously missing) dropping
of the reference to &p_dev->function_config->ref is now handled by
pcmcia_release_dev().

Fixes: 360b65b95bae ("[PATCH] pcmcia: make config_t independent, add reference counting")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message rewrite]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcmcia: cs: fix possible hung task and memory leak pccardd()

[ Upstream commit e3ea1b4847e49234e691c0d66bf030bd65bb7f2b ]

If device_register() returns error in pccardd(), it leads two issues:

1. The socket_released has never been completed, it will block
   pcmcia_unregister_socket(), because of waiting for completion
   of socket_released.
2. The device name allocated by dev_set_name() is leaked.

Fix this two issues by calling put_device() when device_register() fails.
socket_released can be completed in pcmcia_release_socket(), the name can
be freed in kobject_cleanup().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/hdm: Remove broken error path

[ Upstream commit 5d09c63f11f083707b60c8ea0bb420651c47740f ]

Dan reports that cxl_decoder_commit() potentially leaks a hold of
cxl_dpa_rwsem. The potential error case is a "should not" happen
scenario, turn it into a "can not" happen scenario by adding the error
check to cxl_port_setup_targets() where other setting validation occurs.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: http://lore.kernel.org/r/63295673-5d63-4919-b851-3b06d48734c0@moroto.mountain
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/port: Fix @host confusion in cxl_dport_setup_regs()

[ Upstream commit 33d9c987bf8fb68a9292aba7cc4b1711fcb1be4d ]

commit 5d2ffbe4b81a ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")

...moved the dport component registers from a raw component_reg_phys
passed in at dport instantiation time to a 'struct cxl_register_map'
populated with both the component register data *and* the "host" device
for mapping operations.

While typical CXL switch dports are mapped by their associated 'struct
cxl_port', an RCH host bridge dport registered by cxl_acpi needs to wait
until the cxl_mem driver makes the attachment to map the registers. This
is because there are no intervening 'struct cxl_port' instances between
the root cxl_port and the endpoint port in an RCH topology.

For now just mark the host as NULL in the RCH dport case until code that
needs to map the dport registers arrives.

This patch is not flagged for -stable since nothing in the current
driver uses the dport->comp_map.

Now, I am slightly uneasy that cxl_setup_comp_regs() sets map->host to a
wrong value and then cxl_dport_setup_regs() fixes it up, but the
alternatives I came up with are more messy. For example, adding an
@logdev to 'struct cxl_register_map' that the dev_printk()s can fall
back to when @host is NULL. I settled on "post-fixup+comment" since it
is only RCH dports that have this special case where register probing is
split between a host-bridge RCRB lookup and when cxl_mem_probe() does
the association of the cxl_memdev and endpoint port.

[moved rename of @comp_map to @reg_map into next patch]

Fixes: 5d2ffbe4b81a ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-4-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/core/regs: Rename @dev to @host in struct cxl_register_map

[ Upstream commit dd22581f89537163f065e8ef7c125ce0fddf62cc ]

The primary role of @dev is to host the mappings for devm operations.
@dev is too ambiguous as a name. I.e. when does @dev refer to the
'struct device *' instance that the registers belong, and when does
@dev refer to the 'struct device *' instance hosting the mapping for
devm operations?

Clarify the role of @dev in cxl_register_map by renaming it to @host.
Also, rename local variables to 'host' where map->host is used.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 33d9c987bf8f ("cxl/port: Fix @host confusion in cxl_dport_setup_regs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/region: Fix cxl_region_rwsem lock held when returning to user space

[ Upstream commit 3531b27f1f04a6bc9c95cf00d40efe618d57aa93 ]

Fix a missed "goto out" to unlock on error to cleanup this splat:

    WARNING: lock held when returning to user space!
    6.6.0-rc3-lizhijian+ #213 Not tainted
    ------------------------------------------------
    cxl/673 is leaving the kernel with locks still held!
    1 lock held by cxl/673:
     #0: ffffffffa013b9d0 (cxl_region_rwsem){++++}-{3:3}, at: commit_store+0x7d/0x3e0 [cxl_core]

In terms of user visible impact of this bug for backports:

cxl_region_invalidate_memregion() on x86 invokes wbinvd which is a
problematic instruction for virtualized environments. So, on virtualized
x86, cxl_region_invalidate_memregion() returns an error. This failure
case got missed because CXL memory-expander device passthrough is not a
production use case, and emulation of CXL devices is typically limited
to kernel development builds with CONFIG_CXL_REGION_INVALIDATION_TEST=y,
that makes cxl_region_invalidate_memregion() succeed.

In other words, the expected exposure of this bug is limited to CXL
subsystem development environments using QEMU that neglected
CONFIG_CXL_REGION_INVALIDATION_TEST=y.

Fixes: d1257d098a5a ("cxl/region: Move cache invalidation before region teardown, and before setup")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231025085450.2514906-1-lizhijian@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/region: Use cxl_calc_interleave_pos() for auto-discovery

[ Upstream commit 0cf36a85c1408f86a967fb1db721de1b89b9e675 ]

For auto-discovered regions the driver must assign each target to
a valid position in the region interleave set based on the decoder
topology.

The current implementation fails to parse valid decode topologies,
as it does not consider the child offset into a parent port. The sort
put all targets of one port ahead of another port when an interleave
was expected, causing the region assembly to fail.

Replace the existing relative sort with cxl_calc_interleave_pos() that
finds the exact position in a region interleave for an endpoint based
on a walk up the ancestral tree from endpoint to root decoder.

cxl_calc_interleave_pos() was introduced in a prior patch, so the work
here is to use it in cxl_region_sort_targets().

Remove the obsoleted helper functions from the prior sort.

Testing passes on pre-production hardware with BIOS defined regions
that natively trigger this autodiscovery path of the region driver.
Testing passes a CXL unit test using the dev_dbg() calculation test
(see cxl_region_attach()) across an expanded set of region configs:
1, 1, 1+1, 1+1+1, 2, 2+2, 2+2+2, 2+2+2+2, 4, 4+4, where each number
represents the count of endpoints per host bridge.

Fixes: a32320b71f08 ("cxl/region: Add region autodiscovery")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/3946cc55ddc19678733eddc9de2c317749f43f3b.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/region: Calculate a target position in a region interleave

[ Upstream commit a3e00c964fb943934af916f48f0dd43b5110c866 ]

Introduce a calculation to find a target's position in a region
interleave. Perform a self-test of the calculation on user-defined
regions.

The region driver uses the kernel sort() function to put region
targets in relative order. Positions are assigned based on each
target's index in that sorted list. That relative sort doesn't
consider the offset of a port into its parent port which causes
some auto-discovered regions to fail creation. In one failure case,
a 2 + 2 config (2 host bridges each with 2 endpoints), the sort
puts all the targets of one port ahead of another port when they
were expected to be interleaved.

In preparation for repairing the autodiscovery region assembly,
introduce a new method for discovering a target position in the
region interleave.

cxl_calc_interleave_pos() adds a method to find the target position by
ascending from an endpoint to a root decoder. The calculation starts
with the endpoint's local position and position in the parent port. It
traverses towards the root decoder and examines both position and ways
in order to allow the position to be refined all the way to the root
decoder.

This calculation: position = position * parent_ways + parent_pos;
applied iteratively yields the correct position.

Include a self-test that exercises this new position calculation against
every successfully configured user-defined region.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/0ac32c75cf81dd8b86bf07d70ff139d33c2300bc.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 0cf36a85c140 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/region: Prepare the decoder match range helper for reuse

[ Upstream commit 1110581412c7a223439bb3ecdcdd9f4432e08231 ]

match_decoder_by_range() and decoder_match_range() both determine
if an HPA range matches a decoder. The first does it for root
decoders and the second one operates on switch decoders.

Tidy these up with clear naming and make the switch helper more
like the root decoder helper in style and functionality. Make it
take the actual range, rather than an endpoint decoder from which
it extracts the range. Require an exact match on switch decoders,
because unlike a root decoder that maps an entire region, Linux
only supports 1:1 mapping of switch to endpoint decoders. Note that
root-decoders are a super-set of switch-decoders and the range they
cover is a super-set of a region, hence the use of range_contains() for
that case.

Aside from aesthetics and maintainability, this is in preparation
for reuse.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/011b1f498e1758bb8df17c5951be00bd8d489e3b.1698263080.git.alison.schofield@intel.com
[djbw: fixup root decoder vs switch decoder range checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 0cf36a85c140 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call

[ Upstream commit 2be36c09b6b07306be33519e1aa70d2e2a2161bb ]

The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.

This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.

Fixes: e5aac267a10a ("rtc: pcf85363: add alarm support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virt: sevguest: Fix passing a stack buffer as a scatterlist target

[ Upstream commit db10cb9b574675402bfd8fe1a31aafdd45b002df ]

CONFIG_DEBUG_SG highlights that get_{report,ext_report,derived_key)()}
are passing stack buffers as the @req_buf argument to
handle_guest_request(), generating a Call Trace of the following form:

    WARNING: CPU: 0 PID: 1175 at include/linux/scatterlist.h:187 enc_dec_message+0x518/0x5b0 [sev_guest]
    [..]
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
    RIP: 0010:enc_dec_message+0x518/0x5b0 [sev_guest]
    Call Trace:
     <TASK>
    [..]
     handle_guest_request+0x135/0x520 [sev_guest]
     get_ext_report+0x1ec/0x3e0 [sev_guest]
     snp_guest_ioctl+0x157/0x200 [sev_guest]

Note that the above Call Trace was with the DEBUG_SG BUG_ON()s converted
to WARN_ON()s.

This is benign as long as there are no hardware crypto accelerators
loaded for the aead cipher, and no subsequent dma_map_sg() is performed
on the scatterlist. However, sev-guest can not assume the presence of
an aead accelerator nor can it assume that CONFIG_DEBUG_SG is disabled.

Resolve this bug by allocating virt_addr_valid() memory, similar to the
other buffers am @snp_dev instance carries, to marshal requests from
user buffers to kernel buffers.

Reported-by: Peter Gonda <pgonda@google.com>
Closes: http://lore.kernel.org/r/CAMkAt6r2VPPMZ__SQfJse8qWsUyYW3AgYbOUVM0S_Vtk=KvkxQ@mail.gmail.com
Fixes: fce96cf04430 ("virt: Add SEV-SNP guest driver")
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/mem: Fix shutdown order

[ Upstream commit 88d3917f82ed4215a2154432c26de1480a61b209 ]

Ira reports that removing cxl_mock_mem causes a crash with the following
trace:

 BUG: kernel NULL pointer dereference, address: 0000000000000044
 [..]
 RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core]
 [..]
 Call Trace:
  <TASK>
  cxl_region_detach+0xe8/0x210 [cxl_core]
  cxl_decoder_kill_region+0x27/0x40 [cxl_core]
  cxld_unregister+0x29/0x40 [cxl_core]
  devres_release_all+0xb8/0x110
  device_unbind_cleanup+0xe/0x70
  device_release_driver_internal+0x1d2/0x210
  bus_remove_device+0xd7/0x150
  device_del+0x155/0x3e0
  device_unregister+0x13/0x60
  devm_release_action+0x4d/0x90
  ? __pfx_unregister_port+0x10/0x10 [cxl_core]
  delete_endpoint+0x121/0x130 [cxl_core]
  devres_release_all+0xb8/0x110
  device_unbind_cleanup+0xe/0x70
  device_release_driver_internal+0x1d2/0x210
  bus_remove_device+0xd7/0x150
  device_del+0x155/0x3e0
  ? lock_release+0x142/0x290
  cdev_device_del+0x15/0x50
  cxl_memdev_unregister+0x54/0x70 [cxl_core]

This crash is due to the clearing out the cxl_memdev's driver context
(@cxlds) before the subsystem is done with it. This is ultimately due to
the region(s), that this memdev is a member, being torn down and expecting
to be able to de-reference @cxlds, like here:

static int cxl_region_decode_reset(struct cxl_region *cxlr, int count)
...
                if (cxlds->rcd)
                        goto endpoint_reset;
...

Fix it by keeping the driver context valid until memdev-device
unregistration, and subsequently the entire stack of related
dependencies, unwinds.

Fixes: 9cc238c7a526 ("cxl/pci: Introduce cdevm_file_operations")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/memdev: Fix sanitize vs decoder setup locking

[ Upstream commit 339818380868e34ff2c482db05031bf47a67d609 ]

The sanitize operation is destructive and the expectation is that the
device is unmapped while in progress. The current implementation does a
lockless check for decoders being active, but then does nothing to
prevent decoders from racing to be committed. Introduce state tracking
to resolve this race.

This incidentally cleans up unpriveleged userspace from triggering mmio
read cycles by spinning on reading the 'security/state' attribute. Which
at a minimum is a waste since the kernel state machine can cache the
completion result.

Lastly cxl_mem_sanitize() was mistakenly marked EXPORT_SYMBOL() in the
original implementation, but an export was never required.

Fixes: 0c36b6ad436a ("cxl/mbox: Add sanitization handling machinery")
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/pci: Fix sanitize notifier setup

[ Upstream commit 5f2da19714465739da2449253b13ac06cb353a26 ]

Fix a race condition between the mailbox-background command interrupt
firing and the security-state sysfs attribute being removed.

The race is difficult to see due to the awkward placement of the
sanitize-notifier setup code and the multiple places the teardown calls
are made, cxl_memdev_security_init() and cxl_memdev_security_shutdown().

Unify setup in one place, cxl_sanitize_setup_notifier(). Arrange for
the paired cxl_sanitize_teardown_notifier() to safely quiet the notifier
and let the cxl_memdev + irq be unregistered later in the flow.

Note: The special wrinkle of the sanitize notifier is that it interacts
with interrupts, which are enabled early in the flow, and it interacts
with memdev sysfs which is not initialized until late in the flow. Hence
why this setup routine takes an @cxlmd argument, and not just @mds.

This fix is also needed as a preparation fix for a memdev unregistration
crash.

Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20230929100316.00004546@Huawei.com
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Fixes: 0c36b6ad436a ("cxl/mbox: Add sanitization handling machinery")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/pci: Clarify devm host for memdev relative setup

[ Upstream commit f29a824b0b6710328a78b018de3c2cfa9db65876 ]

It is all too easy to get confused about @dev usage in the CXL driver
stack. Before adding a new cxl_pci_probe() setup operation that has a
devm lifetime dependent on @cxlds->dev binding, but also references
@cxlmd->dev, and prints messages, rework the devm_cxl_add_memdev() and
cxl_memdev_setup_fw_upload() function signatures to make this
distinction explicit. I.e. pass in the devm context as an @host argument
rather than infer it from other objects.

This is in preparation for adding a devm_cxl_sanitize_setup_notifier().

Note the whitespace fixup near the change of the devm_cxl_add_memdev()
signature. That uncaught typo originated in the patch that added
cxl_memdev_security_init().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/pci: Remove inconsistent usage of dev_err_probe()

[ Upstream commit 2627c995c15dc375f4b5a591d782a14b1c0e3e7d ]

If dev_err_probe() is to be used it should at least be used consistently
within the same function. It is also worth questioning whether
every potential -ENOMEM needs an explicit error message.

Remove the cxl_setup_fw_upload() error prints for what are rare /
hardware-independent failures.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/pci: Cleanup 'sanitize' to always poll

[ Upstream commit e30a106558e7d1e06d1fcfd12466dc646673d03d ]

In preparation for fixing the init/teardown of the 'sanitize' workqueue
and sysfs notification mechanism, arrange for cxl_mbox_sanitize_work()
to be the single location where the sysfs attribute is notified. With
that change there is no distinction between polled mode and interrupt
mode. All the interrupt does is accelerate the polling interval.

The change to check for "mds->security.sanitize_node" under the lock is
there to ensure that the interrupt, the work routine and the
setup/teardown code can all have a consistent view of the registered
notifier and the workqueue state. I.e. the expectation is that the
interrupt is live past the point that the sanitize sysfs attribute is
published, and it may race teardown, so it must be consulted under a
lock. Given that new locking requirement, cxl_pci_mbox_irq() is moved
from hard to thread irq context.

Lastly, some opportunistic replacements of
"queue_delayed_work(system_wq, ...)", which is just open coded
schedule_delayed_work(), are included.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/pci: Remove unnecessary device reference management in sanitize work

[ Upstream commit 76fe8713dd0a1331d84d767e8e5d3f365d959e8a ]

Given that any particular put_device() could be the final put of the
device, the fact that there are usages of cxlds->dev after
put_device(cxlds->dev) is a red flag. Drop the reference counting since
the device is pinned by being registered and will not be unregistered
without triggering the driver + workqueue to shutdown.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: brcmstb-waketimer: support level alarm_irq

[ Upstream commit e005a9b35b464be5b2e0194f717e90e7e496785d ]

Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
connected to a level interrupt controller rather than an edge
interrupt controller. In this case, the interrupt cannot be left
enabled by the irq handler while preserving the hardware wake-up
signal on wake capable devices or an interrupt storm will occur.

The alarm_expired flag is introduced to allow the disabling of
the interrupt when an alarm expires and to support balancing the
calls to disable_irq() and enable_irq() in accordance with the
existing design.

Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake alarm")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs

[ Upstream commit cab63f64887616e3c4e31cfd8103320be6ebc8d3 ]

put_device() needs to be called on failure of device_register()
to give up the reference initialized in it to avoid refcount leak.

Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230921082410.25548-1-dinghao.liu@zju.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtla: Fix uninitialized variable found

[ Upstream commit 696444a544ecd6d62c1edc89516b376cefb28929 ]

Variable found is not being initialized, in the case where the desired
mount is not found the variable contains garbage. Fix this by initializing
it to zero.

Link: https://lore.kernel.org/all/20230727150117.627730-1-colin.i.king@gmail.com/
Fixes: a957cbc02531 ("rtla: Add -C cgroup support")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/net: fix possible memory leak in p9_check_errors()

[ Upstream commit ce07087964208eee2ca2f9ee4a98f8b5d9027fe6 ]

When p9pdu_readf() is called with "s?d" attribute, it allocates a pointer
that will store a string. But when p9pdu_readf() fails while handling "d"
then this pointer will not be freed in p9_check_errors().

Fixes: 51a87c552dfd ("9p: rework client code to use new protocol support functions")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Message-ID: <20231027030302.11927-1-hbh25y@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events intel: Add broadwellde two metrics

[ Upstream commit 19a214bffdf7abb8d472895bb944d9c269ab1699 ]

Add tma_info_system_socket_clks and uncore_freq metrics that require a
broadwellx style uncore event for UNC_CLOCK.

The associated converter script fix is in:
https://github.com/intel/perfmon/pull/112

Fixes: 7d124303d620 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926205948.1399594-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events intel: Fix broadwellde tma_info_system_dram_bw_use metric

[ Upstream commit 3779416eed25a843364b940decee452620a1de4b ]

Broadwell-de has a consumer core and server uncore. The uncore_arb PMU
isn't present and the broadwellx style cbox PMU should be used
instead. Fix the tma_info_system_dram_bw_use metric to use the server
metric rather than client.

The associated converter script fix is in:
https://github.com/intel/perfmon/pull/111

Fixes: 7d124303d620 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926031034.1201145-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf hist: Add missing puts to hist__account_cycles

[ Upstream commit c1149037f65bcf0334886180ebe3d5efcf214912 ]

Caught using reference count checking on perf top with
"--call-graph=lbr". After this no memory leaks were detected.

Fixes: 57849998e2cd ("perf report: Add processing for cycle histograms")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libperf rc_check: Make implicit enabling work for GCC

[ Upstream commit 75265320d290c5f5891f16967b94883676c46705 ]

Make the implicit REFCOUNT_CHECKING robust to when building with GCC.

Fixes: 9be6ab181b7b ("libperf rc_check: Enable implicitly with sanitizers")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf machine: Avoid out of bounds LBR memory read

[ Upstream commit ab8ce150781d326c6bfbe1e09f175ffde1186f80 ]

Running perf top with address sanitizer and "--call-graph=lbr" fails
due to reading sample 0 when no samples exist. Add a guard to prevent
this.

Fixes: e2b23483eb1d ("perf machine: Factor out lbr_callchain_add_lbr_ip()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/vmcore: Add MMU information to vmcoreinfo

[ Upstream commit 36e826b568e412f61d68fedc02a67b4d8b7583cc ]

Since below commit, address mapping for vmemmap has changed for Radix
MMU, where address mapping is stored in kernel page table itself,
instead of earlier used 'vmemmap_list'.

    commit 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use
    a different vmemmap handling function")

Hence with upstream kernel, in case of Radix MMU, makedumpfile fails
to do address translation for vmemmap addresses, as it depended on
vmemmap_list, which can now be empty.

While fixing the address translation in makedumpfile, it was identified
that currently makedumpfile cannot distinguish between Hash MMU and
Radix MMU, unless VMLINUX is passed with -x flag to makedumpfile. And
hence fails to assign offsets and shifts correctly (such as in L4 to
PGDIR offset calculation in makedumpfile).

For getting the MMU, makedumpfile uses `cur_cpu_spec.mmu_features`.

Add `cur_cpu_spec` symbol and offset of `mmu_features` in the `cpu_spec`
struct, to VMCOREINFO, so that makedumpfile can assign the offsets
correctly, without needing a VMLINUX.

Also, even along with `cur_cpu_spec->mmu_features` makedumpfile has to
depend on the 'MMU_FTR_TYPE_RADIX' flag in mmu_features, implying kernel
developers need to be cautious of changes to 'MMU_FTR_*' defines.

A more stable approach was suggested in the below thread by contributors:
 https://lore.kernel.org/linuxppc-dev/20230920105706.853626-1-adityag@linux.ibm.com/

The suggestion was to add whether 'RADIX_MMU' is enabled in vmcoreinfo

This patch also implements the suggestion, by adding 'RADIX_MMU' in
vmcoreinfo, which makedumpfile can use to get whether the crashed system
had RADIX MMU (in which case 'NUMBER(RADIX_MMU)=1') or not (in which
case 'NUMBER(RADIX_MMU)=0')

Fixes: 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023072612.50874-1-adityag@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: xhci-plat: fix possible kernel oops while resuming

[ Upstream commit a5f928db59519a15e82ecba4ae3e7cbf5a44715a ]

If this driver enables the xHC clocks while resuming from sleep, it calls
clk_prepare_enable() without checking for errors and blithely goes on to
read/write the xHC's registers -- which, with the xHC not being clocked,
at least on ARM32 usually causes an imprecise external abort exceptions
which cause kernel oops.  Currently, the chips for which the driver does
the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based
on ARM32 CPUs, as it seems...

Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.

Fixes: 8bd954c56197 ("usb: host: xhci-plat: suspend and resume clocks")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Loosen RPM as default policy to cover for AMD xHC 1.1

[ Upstream commit 4baf1218150985ee3ab0a27220456a1f027ea0ac ]

The AMD USB host controller (1022:43f7) isn't going into PCI D3 by default
without anything connected. This is because the policy that was introduced
by commit a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all
xHC 1.2 or later devices") only covered 1.2 or later.

The 1.1 specification also has the same requirement as the 1.2
specification for D3 support. So expand the runtime PM as default policy
to all AMD 1.1 devices as well.

Fixes: a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices")
Link: https://composter.com.ua/documents/xHCI_Specification_for_USB.pdf
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events: Update PMC used in PM_RUN_INST_CMPL event for power10 platform

[ Upstream commit 3f8b6e5b11192dacb721d2d28ea4589917f5e822 ]

The CPI_STALL_RATIO metric group can be used to present the high
level CPI stall breakdown metrics in powerpc, which will show:

- DISPATCH_STALL_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completion stall cycles per insn )

Commit cf26e043c2a9 ("perf vendor events power10: Add JSON
metric events to present CPI stall cycles in powerpc)" which added
the CPI_STALL_RATIO metric group, also modified
the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5,
to avoid multiplexing of events.
But that got revert in recent changes. Fix this issue by changing
back the PMC value used in PM_RUN_INST_CMPL to PMC5.

Result with the fix:

 ./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>

 Performance counter stats for 'workload':

        68,745,426      PM_CMPL_STALL                    #     0.21 COMPLETION_STALL_CPI
         7,692,827      PM_ISSUE_STALL                   #     0.02 ISSUE_STALL_CPI
       322,638,223      PM_RUN_INST_CMPL                 #     0.05 DISPATCH_STALL_CPI
                                                  #     0.48 EXECUTION_STALL_CPI
        16,858,553      PM_DISP_STALL_CYC
       153,880,133      PM_EXEC_STALL

       0.089774592 seconds time elapsed

"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.

Fixes: 7d473f475b2a ("perf vendor events: Move JSON/events to appropriate files for power10 platform")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: maddy@linux.ibm.com
Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: fix potential memory leak in init_cpu_associativity()

[ Upstream commit 95f1a128cd728a7257d78e868f1f5a145fc43736 ]

If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.

Fixes: d62c8deeb6e6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/imc-pmu: Use the correct spinlock initializer.

[ Upstream commit 007240d59c11f87ac4f6cfc6a1d116630b6b634c ]

The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().

Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.

Fixes: 76d588dddc459 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/vas: Limit open window failure messages in log bufffer

[ Upstream commit 73b25505ce043b561028e5571d84dc82aa53c2b4 ]

The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls.  Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.

So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.

Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).

Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Use the right bpf_probe_read(_str) variant for reading user data

[ Upstream commit 5069211e2f0b47e75119805e23ae6352d871e263 ]

Perf test case 111 Check open filename arg using perf trace + vfs_getname
fails on s390. This is caused by a failing function
bpf_probe_read() in file util/bpf_skel/augmented_raw_syscalls.bpf.c.

The root cause is the lookup by address. Function bpf_probe_read()
is used. This function works only for architectures
with ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.

On s390 is not possible to determine from the address to which
address space the address belongs to (user or kernel space).

Replace bpf_probe_read() by bpf_probe_read_kernel()
and bpf_probe_read_str() by bpf_probe_read_user_str() to
explicity specify the address space the address refers to.

Output before:
 # ./perf trace -eopen,openat -- touch /tmp/111
 libbpf: prog 'sys_enter': BPF program load failed: Invalid argument
 libbpf: prog 'sys_enter': -- BEGIN PROG LOAD LOG --
 reg type unsupported for arg#0 function sys_enter#75
 0: R1=ctx(off=0,imm=0) R10=fp0
 ; int sys_enter(struct syscall_enter_args *args)
 0: (bf) r6 = r1           ; R1=ctx(off=0,imm=0) R6_w=ctx(off=0,imm=0)
 ; return bpf_get_current_pid_tgid();
 1: (85) call bpf_get_current_pid_tgid#14      ; R0_w=scalar()
 2: (63) *(u32 *)(r10 -8) = r0 ; R0_w=scalar() R10=fp0 fp-8=????mmmm
 3: (bf) r2 = r10              ; R2_w=fp0 R10=fp0
 ;
 .....
 lines deleted here
 .....
 23: (bf) r3 = r6              ; R3_w=ctx(off=0,imm=0) R6=ctx(off=0,imm=0)
 24: (85) call bpf_probe_read#4
 unknown func bpf_probe_read#4
 processed 23 insns (limit 1000000) max_states_per_insn 0 \
 total_states 2 peak_states 2 mark_read 2
 -- END PROG LOAD LOG --
 libbpf: prog 'sys_enter': failed to load: -22
 libbpf: failed to load object 'augmented_raw_syscalls_bpf'
 libbpf: failed to load BPF skeleton 'augmented_raw_syscalls_bpf': -22
 ....

Output after:
 # ./perf test -Fv 111
 111: Check open filename arg using perf trace + vfs_getname          :
 --- start ---
     1.085 ( 0.011 ms): touch/320753 openat(dfd: CWD, filename: \
"/tmp/temporary_file.SWH85", \
flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
 ---- end ----
 Check open filename arg using perf trace + vfs_getname: Ok
 #

Test with the sleep command shows:
Output before:
 # ./perf trace -e *sleep sleep 1.234567890
     0.000 (1234.681 ms): sleep/63114 clock_nanosleep(rqtp: \
         { .tv_sec: 0, .tv_nsec: 0 }, rmtp: 0x3ffe0979720) = 0
 #

Output after:
 # ./perf trace -e *sleep sleep 1.234567890
     0.000 (1234.686 ms): sleep/64277 clock_nanosleep(rqtp: \
         { .tv_sec: 1, .tv_nsec: 234567890 }, rmtp: 0x3fff3df9ea0) = 0
 #

Fixes: 14e4b9f4289a ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Co-developed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20231019082642.3286650-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Hide empty pt_regs at base of the stack

[ Upstream commit d45c4b48dafb5820e5cc267ff9a6d7784d13a43c ]

A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then may later return to userspace. While it's running in the
kernel it has a pt_regs at the base of its kernel stack, but that
pt_regs is all zeroes.

If the thread oopses in that state, it leads to an ugly stack trace with
a big block of zero GPRs, as reported by Joel:

  Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3
  Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
  Call Trace:
  [c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable)
  [c0000000036afb30] [c00000000013c524] panic+0x178/0x424
  [c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324
  [c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344
  [c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac
  [c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
  [c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
  --- interrupt: 0 at 0x0
  NIP:  0000000000000000 LR: 0000000000000000 CTR: 0000000000000000
  REGS: c0000000036afe80 TRAP: 0000   Not tainted  (6.5.0-rc7-00004-gf7757129e3de-dirty)
  MSR:  0000000000000000 <>  CR: 00000000  XER: 00000000
  CFAR: 0000000000000000 IRQMASK: 0
  GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  NIP [0000000000000000] 0x0
  LR [0000000000000000] 0x0
  --- interrupt: 0

The all-zero pt_regs looks ugly and conveys no useful information, other
than its presence. So detect that case and just show the presence of the
frame by printing the interrupt marker, eg:

  Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301
  Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
  Call Trace:
  [c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable)
  [c000000003aabb30] [c00000000014c624] panic+0x178/0x424
  [c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324
  [c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344
  [c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac
  [c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
  [c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
  --- interrupt: 0 at 0x0

To avoid ever suppressing a valid pt_regs make sure the pt_regs has a
zero MSR and TRAP value, and is located at the very base of the stack.

Fixes: 6895dfc04741 ("powerpc: copy_thread fill in interrupt frame marker and back chain")
Reported-by: Joel Stanley <joel@jms.id.au>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230824064210.907266-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xive: Fix endian conversion size

[ Upstream commit ff7a60ab1e065257a0e467c13b519f4debcd7fcf ]

Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.

[1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3854

Fixes: 88ec6b93c8e7 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/40x: Remove stale PTE_ATOMIC_UPDATES macro

[ Upstream commit cc8ee288f484a2a59c01ccd4d8a417d6ed3466e3 ]

40x TLB handlers were reworked by commit 2c74e2586bb9 ("powerpc/40x:
Rework 40x PTE access and TLB miss") to not require PTE_ATOMIC_UPDATES
anymore.

Then commit 4e1df545e2fa ("powerpc/pgtable: Drop PTE_ATOMIC_UPDATES")
removed all code related to PTE_ATOMIC_UPDATES.

Remove left over PTE_ATOMIC_UPDATES macro.

Fixes: 2c74e2586bb9 ("powerpc/40x: Rework 40x PTE access and TLB miss")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f061db5857fcd748f84a6707aad01754686ce97e.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Do not ignore the default vmlinux.h

[ Upstream commit 1f36b190ad2dea68e3a7e84b7b2f24ce8c4063ea ]

The recent change made it possible to generate vmlinux.h from BTF and
to ignore the file.  But we also have a minimal vmlinux.h that will be
used by default.  It should not be ignored by GIT.

Fixes: b7a2d774c9c5 ("perf build: Add ability to build with a generated vmlinux.h")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/
Cc: oe-kbuild-all@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix ishtp MODULE_DEVICE_TABLE built on big-endian host

[ Upstream commit ac96a15a0f0c8812a3aaa587b871cd5527f6d736 ]

When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().

For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.

If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
    MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");

However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
    MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");

This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.

The guid field must not be reversed because guid_t is an array of __u8.

Fixes: fa443bc3c1e4 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix tee MODULE_DEVICE_TABLE built on big-endian host

[ Upstream commit 7f54e00e5842663c2cea501bbbdfa572c94348a3 ]

When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().

For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.

If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
    MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");

However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
    MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");

The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.

This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).

The uuid field must not be reversed because uuid_t is an array of __u8.

Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/ap: re-init AP queues on config on

[ Upstream commit 32d1d9204f8db3360be55e65bd182a1a68f93308 ]

On a state toggle from config off to config on and on the
state toggle from checkstop to not checkstop the queue's
internal states was set but the state machine was not
nudged. This did not care as on the first enqueue of a
request the state machine kick ran.

However, within an Secure Execution guest a queue is
only chosen by the scheduler when it has been bound.
But to bind a queue, it needs to run through the initial
states (reset, enable interrupts, ...). So this is like
a chicken-and-egg problem and the result was in fact
that a queue was unusable after a config off/on toggle.

With some slight rework of the handling of these states
now the new function _ap_queue_init_state() is called
which is the core of the ap_queue_init_state() function
but without locking handling. This has the benefit that
it can be called on all the places where a (re-)init
of the AP queue's state machine is needed.

Fixes: 2d72eaf036d2 ("s390/ap: implement SE AP bind, unbind and associate")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf mem-events: Avoid uninitialized read

[ Upstream commit 85f73c377b2ac9988a204b119aebb33ca5c60083 ]

pmu should be initialized to NULL before perf_pmus__scan loop. Fix and
shrink the scope of pmu at the same time. Issue detected by clang-tidy.

Fixes: 5752c20f3787 ("perf mem: Scan all PMUs instead of just core ones")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf parse-events: Fix for term values that are raw events

[ Upstream commit b20576fd7fe39554b212095c3c0d7a3dff512515 ]

Raw events can be strings like 'r0xead' but the 0x is optional so they
can also be 'read'. On IcelakeX uncore_imc_free_running has an event
called 'read' which may be programmed as:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
```
However, the PE_RAW type isn't allowed on the right of a term, even
though in this case we just want to interpret it as a string. This
leads to the following error on IcelakeX:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
                                  \___ parser error
Run 'perf list' for a list of valid events

 Usage: perf stat [<options>] [<command>]

    -e, --event <event> event selector. use 'perf list' to list available events
```
Fix this by allowing raw types on the right of terms and treat them as
strings, just as is already done for PE_LEGACY_CACHE. Make this
consistent by just entirely removing name_or_legacy and always using
name_or_raw that covers all three cases.

Fixes: 6fd1e5191591 ("perf parse-events: Support PMUs for legacy cache events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230928004431.1926969-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf build: Add missing comment about NO_LIBTRACEEVENT=1

[ Upstream commit c1783ddfb62420c44cdf4672dad2046f056c624b ]

By default perf will fail the build if the development files for
libtraceevent are not available.

To build perf without libtraceevent support, disabling several features
such as 'perf trace', one needs to add NO_LIBTRACEVENT=1 to the make
command line.

Add the missing comments about that to the tools/perf/Makefile.perf
file, just like all the other such command line toggles.

Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZR6+MhXtLnv6ow6E@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: fix error handling in qnoc_probe()

[ Upstream commit 273f74a2e7d15a5c216a4a26b84b1563c7092c9d ]

Add missing clk_disable_unprepare() and clk_bulk_disable_unprepare()
in the error path in qnoc_probe(). And when qcom_icc_qos_set() fails,
it needs remove nodes and disable clks.

Fixes: 2e2113c8a64f ("interconnect: qcom: rpm: Handle interface clocks")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230803130521.959487-1-yangyingliang@huawei.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Only define __parse_fpscr() when required

[ Upstream commit c7e0d9bb9154c6e6b2ac8746faba27b53393f25e ]

Clang 17 reports:

arch/powerpc/kernel/traps.c:1167:19: error: unused function '__parse_fpscr' [-Werror,-Wunused-function]

__parse_fpscr() is called from two sites. First call is guarded
by #ifdef CONFIG_PPC_FPU_REGS

Second call is guarded by CONFIG_MATH_EMULATION which selects
CONFIG_PPC_FPU_REGS.

So only define __parse_fpscr() when CONFIG_PPC_FPU_REGS is defined.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309210327.WkqSd5Bq-lkp@intel.com/
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5de2998c57f3983563b27b39228ea9a7229d4110.1695385984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: osm-l3: Replace custom implementation of COUNT_ARGS()

[ Upstream commit 577a3c5af1fe87b65931ea94d5515266da301f56 ]

Replace custom and non-portable implementation of COUNT_ARGS().

Fixes: 5bc9900addaf ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230920154927.2090732-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8350: Set ACV enable_mask

[ Upstream commit df1b8356a80ab47a7623e08facf36fe434ea9722 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: d26a56674497 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-11-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8250: Set ACV enable_mask

[ Upstream commit 9434c6896123141ac1f8f18b3d1751abbecdd03f ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 6df5b349491e ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-10-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8150: Set ACV enable_mask

[ Upstream commit 7ed42176406e5a2c9a5767d0d75690c7d1588027 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: a09b817c8bad ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm6350: Set ACV enable_mask

[ Upstream commit fe7a3abf4111992af3de51d22383a8e8a0affe1e ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 6a6eff73a954 ("interconnect: qcom: Add SM6350 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-8-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sdm845: Set ACV enable_mask

[ Upstream commit f8fe97a9fd2098de0570387029065eef657d50ee ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sdm670: Set ACV enable_mask

[ Upstream commit 7b85ea8b9300be5c2818e1f61a274ff2c4c063ee ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 7e438e18874e ("interconnect: qcom: add sdm670 interconnects")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-6-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc8280xp: Set ACV enable_mask

[ Upstream commit 688ffb3dcf85fc4b7ea82af842493013747a9e2c ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: f29dabda7917 ("interconnect: qcom: Add SC8280XP interconnect provider")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-5-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc8180x: Set ACV enable_mask

[ Upstream commit 0fcaaed3ff4b99e5b688b799f48989f1e4bb8a8b ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 9c8c6bac1ae8 ("interconnect: qcom: Add SC8180x providers")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-4-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7280: Set ACV enable_mask

[ Upstream commit 437b8e7fcd5df792cb8b8095e9f6eccefec6c099 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 46bdcac533cc ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7180: Set ACV enable_mask

[ Upstream commit 1ad83c4792722fe134c1352591420702ff7b9091 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 2d1f95ab9feb ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: qdu1000: Set ACV enable_mask

[ Upstream commit 8517824f0e94d52ab82742106314f0b8875e03c4 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 1f51339f7dd0 ("interconnect: qcom: Add QDU1000/QRU1000 interconnect driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-1-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()

[ Upstream commit 8b07c1fb0f1ad139373c8253f2fad8bc43fab07d ]

Otherwise, it may print random physical block address in tracepoint
of f2fs_map_blocks() as below:

f2fs_map_blocks: dev = (253,16), ino = 2297, file offset = 0, start blkaddr = 0xa356c421, len = 0x0, flags = 0

Fixes: c4020b2da4c9 ("f2fs: support F2FS_IOC_PRECACHE_EXTENTS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()

[ Upstream commit 83c761f568733277ce1f7eb9dc9e890649c29a8c ]

If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().

Remove this erroneous BUG_ON().

It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')

Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: usbip: fix stub_dev hub disconnect

[ Upstream commit 97475763484245916735a1aa9a3310a01d46b008 ]

If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.

Fixes: 6080cd0e9239 ("staging: usbip: claim ports used by shared devices")
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: iio: iio_generic_buffer ensure alignment

[ Upstream commit 2d3dff577dd0ea8fe9637a13822f7603c4a881c8 ]

The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.

The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.

Add the padding bytes required to align the next sample with the scan size.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e58537ccce73 ("staging: iio: update example application.")
Link: https://lore.kernel.org/r/ZRvlm4ktNLu+qmlf@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

debugfs: Fix __rcu type comparison warning

[ Upstream commit 7360a48bd0f5e62b2d00c387d5d3f2821eb290ce ]

Sparse reports the following:

fs/debugfs/file.c:942:9: sparse: sparse: incompatible types in comparison expression (different address spaces):
fs/debugfs/file.c:942:9: sparse:    char [noderef] __rcu *
fs/debugfs/file.c:942:9: sparse:    char *

rcu_assign_pointer() expects that it's assigning to pointers annotated
with __rcu. We can't annotate the generic struct file::private_data, so
cast it instead.

Fixes: 86b5488121db ("debugfs: Add write support to debugfs_create_str()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309091933.BRWlSnCq-lkp@intel.com/
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20230922134512.5126-1-quic_mdtipton@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: st_core: Do not call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 4d08c3d12b61022501989f9f071514d2d6f77c47 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.

Fixes: 53618cc1e51e ("Staging: sources for ST core")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/perf: Update call stack check in builtin-lock.c

[ Upstream commit d7c9ae8d5d1be0c4156d1e20e4369a77b711a4cc ]

The perf test named "kernel lock contention analysis test"
fails in powerpc system with below error:

  [command]# ./perf test 81 -vv
   81: kernel lock contention analysis test                            :
   --- start ---
  test child forked, pid 2140
  Testing perf lock record and perf lock contention
  Testing perf lock contention --use-bpf
  [Skip] No BPF support
  Testing perf lock record and perf lock contention at the same time
  Testing perf lock contention --threads
  Testing perf lock contention --lock-addr
  Testing perf lock contention --type-filter (w/ spinlock)
  Testing perf lock contention --lock-filter (w/ tasklist_lock)
  Testing perf lock contention --callstack-filter (w/ unix_stream)
  [Fail] Recorded result should have a lock from unix_stream:
  test child finished with -1
   ---- end ----
  kernel lock contention analysis test: FAILED!

The test is failing because we get an address entry with 0 in
perf lock samples for powerpc, and code for lock contention
option "--callstack-filter" will not check further entries after
address 0.

Below are some of the samples from test generated perf.data file, which
have 0 address in the 2nd entry of callstack:
 --------
sched-messaging    3409 [001]  7152.904029: lock:contention_begin: 0xc00000c80904ef00 (flags=SPIN)
        c0000000001e926c __traceiter_contention_begin+0x6c ([kernel.kallsyms])
                       0 [unknown] ([unknown])
        c000000000f8a178 native_queued_spin_lock_slowpath+0x1f8 ([kernel.kallsyms])
        c000000000f89f44 _raw_spin_lock_irqsave+0x84 ([kernel.kallsyms])
        c0000000001d9fd0 prepare_to_wait+0x50 ([kernel.kallsyms])
        c000000000c80f50 sock_alloc_send_pskb+0x1b0 ([kernel.kallsyms])
        c000000000e82298 unix_stream_sendmsg+0x2b8 ([kernel.kallsyms])
        c000000000c78980 sock_sendmsg+0x80 ([kernel.kallsyms])

sched-messaging    3408 [005]  7152.904036: lock:contention_begin: 0xc00000c80904ef00 (flags=SPIN)
        c0000000001e926c __traceiter_contention_begin+0x6c ([kernel.kallsyms])
                       0 [unknown] ([unknown])
        c000000000f8a178 native_queued_spin_lock_slowpath+0x1f8 ([kernel.kallsyms])
        c000000000f89f44 _raw_spin_lock_irqsave+0x84 ([kernel.kallsyms])
        c0000000001d9fd0 prepare_to_wait+0x50 ([kernel.kallsyms])
        c000000000c80f50 sock_alloc_send_pskb+0x1b0 ([kernel.kallsyms])
        c000000000e82298 unix_stream_sendmsg+0x2b8 ([kernel.kallsyms])
        c000000000c78980 sock_sendmsg+0x80 ([kernel.kallsyms])
 --------

Based on commit 20002ded4d93 ("perf_counter: powerpc: Add callchain support"),
incase of powerpc, the callchain saved by kernel always includes first
three entries as the NIP (next instruction pointer), LR (link register), and
the contents of LR save area in the second stack frame. In certain scenarios
its possible to have invalid kernel instruction addresses in either of LR or the
second stack frame's LR. In that case, kernel will store the address as zer0.
Hence, its possible to have 2nd or 3rd callstack entry as 0.

As per the current code in match_callstack_filter function, we skip the callstack
check incase we get 0 address. And hence the test case is failing in powerpc.

Fix this issue by updating the check in match_callstack_filter function,
to not skip callstack check if the 2nd or 3rd entry have 0 address
for powerpc.

Result in powerpc after patch changes:

  [command]# ./perf test 81 -vv
   81: kernel lock contention analysis test                            :
   --- start ---
  test child forked, pid 4570
  Testing perf lock record and perf lock contention
  Testing perf lock contention --use-bpf
  [Skip] No BPF support
  Testing perf lock record and perf lock contention at the same time
  Testing perf lock contention --threads
  Testing perf lock contention --lock-addr
  Testing perf lock contention --type-filter (w/ spinlock)
  Testing perf lock contention --lock-filter (w/ tasklist_lock)
  [Skip] Could not find 'tasklist_lock'
  Testing perf lock contention --callstack-filter (w/ unix_stream)
  Testing perf lock contention --callstack-filter with task aggregation
  Testing perf lock contention CSV output
  [Skip] No BPF support
  test child finished with 0
   ---- end ----
  kernel lock contention analysis test: Ok

Fixes: ebab291641be ("perf lock contention: Support filters for different aggregation")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231003092113.252380-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: edma: handle irq_of_parse_and_map() errors

[ Upstream commit 14f6d317913f634920a640e9047aa2e66f5bdcb7 ]

Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error.  So this check for valid IRQs should only
accept values > 0.

Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>