mason.huo [Wed, 8 Jun 2022 01:38:33 +0000 (09:38 +0800)]
media: starfive: Remove isp1 for jh7110
For jh7110 soc, there is only one isp controller.
To avoid the system errors when config to support
dual isp, remove the all isp1 related source code
from driver.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Tue, 7 Jun 2022 02:51:31 +0000 (10:51 +0800)]
media: starfive: Fix isp line cache coherence issue
The isp app uses the mmap buffer mode which needs to
sync the cache before isp controller writes data into
the buffer.
Add L2 cache flushing before sending data to user space,
so that make sure the cache coherence.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Tue, 7 Jun 2022 03:05:52 +0000 (11:05 +0800)]
media: starfive: Change the default format of scd_y pad
liuxl0327 [Fri, 20 May 2022 02:37:55 +0000 (10:37 +0800)]
media: starfive: Add set fmt for all ISP pads
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Mon, 30 May 2022 03:12:10 +0000 (11:12 +0800)]
media: starfive: Fix the second run stuck issue
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Tue, 17 May 2022 08:23:41 +0000 (16:23 +0800)]
media: starfive: Add dual isp config
Add STF_DUAL_ISP Kconfig to config single isp
or dual isp.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Tue, 17 May 2022 05:08:24 +0000 (13:08 +0800)]
media: starfive: Sort isp1 definitions
To support isp0 & isp1 configuration, we should
sort the isp sequence firtly.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
godspeed.kuo [Thu, 7 Apr 2022 02:17:05 +0000 (10:17 +0800)]
v4l2: modified sc buffer toggle conuter.
liuxl0327 [Mon, 21 Mar 2022 10:23:46 +0000 (18:23 +0800)]
v4l2: ISP update init reg config
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 10:19:18 +0000 (18:19 +0800)]
v4l2: ISP add stream on event
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 10:17:05 +0000 (18:17 +0800)]
v4l2: ISP multi stream set format
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 09:56:39 +0000 (17:56 +0800)]
v4l2: VIN add set dummy buffer
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 09:37:32 +0000 (17:37 +0800)]
v4l2: ISP/VIN support multi stream
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 08:08:04 +0000 (16:08 +0800)]
v4l2: ISP update irq handler
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 07:20:57 +0000 (15:20 +0800)]
v4l2: Support imx219 multi stream on
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 07:20:43 +0000 (15:20 +0800)]
v4l2: starfive ISP add private ioctl
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 07:19:27 +0000 (15:19 +0800)]
v4l2: starfive DVP support multi stream on
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 06:58:27 +0000 (14:58 +0800)]
v4l2: starfive CSIPHY support multi stream on
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 06:56:22 +0000 (14:56 +0800)]
v4l2: starfive CSI support multi stream on
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 05:59:53 +0000 (13:59 +0800)]
v4l2: sc2235 support multi stream on and update reg params
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 05:58:07 +0000 (13:58 +0800)]
v4l2: ov5640 support multi stream on
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
liuxl0327 [Mon, 21 Mar 2022 05:57:12 +0000 (13:57 +0800)]
v4l2: ov4689 support multi stream on
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
andy.hu [Fri, 1 Jul 2022 06:33:50 +0000 (06:33 +0000)]
Merge branch 'CR_1460_CLOCK_TREE_pmu_Xingyu.Wu' into 'jh7110-5.15.y-devel'
clk:starfive:Update pmu Api
See merge request sdk/linux!218
xingyu.wu [Fri, 1 Jul 2022 06:24:43 +0000 (14:24 +0800)]
clk:starfive:Update pmu Api
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
andy.hu [Fri, 1 Jul 2022 02:54:10 +0000 (02:54 +0000)]
Merge branch 'CR_1449_SEC_william.qiu' into 'jh7110-5.15.y-devel'
crypto:starfive:fix clk enable error
See merge request sdk/linux!214
andy.hu [Fri, 1 Jul 2022 02:53:52 +0000 (02:53 +0000)]
Merge branch 'CR_679_PMU_walker.chen' into 'jh7110-5.15.y-devel'
PMU: Power Domain Controller Driver for JH7110 SOC
See merge request sdk/linux!217
Walker Chen [Fri, 1 Jul 2022 01:49:32 +0000 (09:49 +0800)]
PMU: Power Domain Controller Driver for JH7110 SOC
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
andy.hu [Thu, 30 Jun 2022 12:24:57 +0000 (12:24 +0000)]
Merge branch 'CR_1291_PDM_PWMDAC_curry.zhang' into 'jh7110-5.15.y-devel'
[Audio: Config] enable pdm driver to solve jh7110-evb-can-pdm-pwmdac.dtb
See merge request sdk/linux!196
andy.hu [Thu, 30 Jun 2022 12:24:38 +0000 (12:24 +0000)]
Merge branch 'CR_1411_SPI_overlay_Xingyu.Wu' into 'jh7110-5.15.y-devel'
Cr 1411 spi overlay xingyu.wu
See merge request sdk/linux!197
andy.hu [Thu, 30 Jun 2022 12:23:43 +0000 (12:23 +0000)]
Merge branch 'CR_1447_7110_evb_5.15_vout_shengyang.chen' into 'jh7110-5.15.y-devel'
Cr 1447 7110 evb 5.15 vout shengyang.chen
See merge request sdk/linux!210
shengyang.chen [Thu, 30 Jun 2022 12:08:57 +0000 (20:08 +0800)]
riscv:linux:driver:drm
remove some useless comment
Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Thu, 30 Jun 2022 11:36:27 +0000 (19:36 +0800)]
arch:configs:starfive_jh7110_defconfig
add mipi display config
Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Thu, 30 Jun 2022 11:35:48 +0000 (19:35 +0800)]
riscv:linux:arch:dts:starfive
remove superfluous port
Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Thu, 30 Jun 2022 11:34:28 +0000 (19:34 +0800)]
riscv:linux:driver:drm
fix display problem of inno with mipi config opened
fix starup problem
Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
william.qiu [Thu, 30 Jun 2022 11:19:02 +0000 (19:19 +0800)]
crypto:starfive:fix clk enable error
fix clk enable error while choose CONFIG_PM
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
andy.hu [Thu, 30 Jun 2022 11:03:53 +0000 (11:03 +0000)]
Merge branch 'CR_1287_FAT_MOUNT_FAILED_samin.guo' into 'jh7110-5.15.y-devel'
riscv:defconfig:jh7110: Fix the problem of failing to mount fat-fs
See merge request sdk/linux!193
andy.hu [Thu, 30 Jun 2022 10:41:31 +0000 (10:41 +0000)]
Merge branch 'CR_1446_v4l2_syscon_changhuang.liang' into 'jh7110-5.15.y-devel'
V4L2: modify syscon interface
See merge request sdk/linux!208
andy.hu [Thu, 30 Jun 2022 08:58:52 +0000 (08:58 +0000)]
Merge branch 'CR_1429_sc2235_pinctrl_changhuang.liang' into 'jh7110-5.15.y-devel'
v4l2: sc2235 delete pinctrl configure
See merge request sdk/linux!203
andy.hu [Thu, 30 Jun 2022 08:57:06 +0000 (08:57 +0000)]
Merge branch 'CR_1440_sdio1config_jianlong' into 'jh7110-5.15.y-devel'
CR_1440 dts: starfive: Fix sdio1 config
See merge request sdk/linux!205
andy.hu [Thu, 30 Jun 2022 08:55:48 +0000 (08:55 +0000)]
Merge branch 'CR_1433_515_pwmoverlay_jianlong' into 'jh7110-5.15.y-devel'
CR_1433 dts: starfive: Fix fail to load overlay pwm
See merge request sdk/linux!201
changhuang.liang [Thu, 30 Jun 2022 08:53:08 +0000 (16:53 +0800)]
V4L2: modify syscon interface
dts/starfive: vin add syscon node
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
xingyu.wu [Thu, 23 Jun 2022 07:47:49 +0000 (15:47 +0800)]
spi:Modify pl022 driver format
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
xingyu.wu [Wed, 29 Jun 2022 08:08:24 +0000 (16:08 +0800)]
dts:overlay:Modify spi nodes about 'compatible' and 'status'
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
xingyu.wu [Tue, 28 Jun 2022 14:48:15 +0000 (22:48 +0800)]
spi-pl022:starfive:Add platform bus register to adapt overlay
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Jianlong Huang [Thu, 30 Jun 2022 07:03:27 +0000 (15:03 +0800)]
dts: starfive: Fix sdio1 config
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
xingyu.wu [Thu, 30 Jun 2022 07:17:45 +0000 (15:17 +0800)]
deconfig:Add spi driver for starfive
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
xingyu.wu [Thu, 30 Jun 2022 06:45:38 +0000 (14:45 +0800)]
spi-pl022:starfive:Add spi driver for StarFive SoC platform
Modified based on spi-pl022.c
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
xingyu.wu [Thu, 30 Jun 2022 06:10:50 +0000 (14:10 +0800)]
spi:pl022:revert commit
commit ID:
940582b82915ee234594afff1a0290cead49a290
2e334ea5dc9637799177f672f2dd5c04c1b567e4
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
changhuang.liang [Thu, 30 Jun 2022 01:47:30 +0000 (09:47 +0800)]
v4l2: sc2235 delete pinctrl configure
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
andy.hu [Thu, 30 Jun 2022 02:20:33 +0000 (02:20 +0000)]
Merge branch 'CR_1266_Watchdog_sysfs_Xingyu.Wu' into 'jh7110-5.15.y-devel'
deconfig:Add watchdog_sysfs
See merge request sdk/linux!199
Jianlong Huang [Thu, 30 Jun 2022 01:46:49 +0000 (09:46 +0800)]
dts: starfive: Fix fail to load overlay pwm
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
curry.zhang [Thu, 30 Jun 2022 01:12:32 +0000 (18:12 -0700)]
[Audio: Config] enable pdm driver to solve jh7110-evb-can-pdm-pwmdac.dtb
couldn't work
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
andy.hu [Wed, 29 Jun 2022 08:33:11 +0000 (08:33 +0000)]
Merge branch 'CR_1418_Input_515_mason.huo' into 'jh7110-5.15.y-devel'
riscv: defconfig: Add input event interface
See merge request sdk/linux!191
mason.huo [Wed, 29 Jun 2022 06:56:01 +0000 (14:56 +0800)]
riscv: defconfig: Add input event interface
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
andy.hu [Wed, 29 Jun 2022 06:48:50 +0000 (06:48 +0000)]
Merge branch 'CR_1403_SPDIF_curry.zhang' into 'jh7110-5.15.y-devel'
[Audio: SPDIF] Fixed spdif function driver in linux 5.15
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
See merge request sdk/linux!184
curry.zhang [Wed, 29 Jun 2022 06:48:50 +0000 (02:48 -0400)]
[Audio: SPDIF] Fixed spdif function driver in linux 5.15
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
xingyu.wu [Tue, 28 Jun 2022 16:29:14 +0000 (00:29 +0800)]
deconfig:Add watchdog_sysfs
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
andy.hu [Tue, 28 Jun 2022 10:34:16 +0000 (10:34 +0000)]
Merge branch 'CR_1404_gpioconflict_jianlong' into 'jh7110-5.15.y-devel'
CR_1404 dts: starfive: Fix overlay-rgb2hdmi gpio conflict
See merge request sdk/linux!180
andy.hu [Tue, 28 Jun 2022 10:33:03 +0000 (10:33 +0000)]
Merge branch 'CR_1401_V4L2_changhuang.liang' into 'jh7110-5.15.y-devel'
v4l2: fixed enum frame intercal error
See merge request sdk/linux!181
andy.hu [Tue, 28 Jun 2022 10:31:04 +0000 (10:31 +0000)]
Merge branch 'CR_1407_7110evb_5.10_vout_shengyang.chen' into 'jh7110-5.15.y-devel'
riscv:linux:driver:drm
See merge request sdk/linux!183
shengyang.chen [Tue, 28 Jun 2022 09:38:35 +0000 (17:38 +0800)]
riscv:linux:driver:drm
remove printk of function update_fb() in vs_dc.c
Signed-off-by:shengyang.chen<shengyang.chen@starfivetech.com>
changhuang.liang [Tue, 28 Jun 2022 09:09:53 +0000 (17:09 +0800)]
v4l2: fixed enum frame intercal error
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Jianlong Huang [Tue, 28 Jun 2022 08:30:08 +0000 (16:30 +0800)]
dts: starfive: Fix overlay-rgb2hdmi gpio conflict
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
andy.hu [Tue, 28 Jun 2022 05:47:56 +0000 (05:47 +0000)]
Merge branch 'CR_1335_DRM_inno_driver_keith.zhao' into 'jh7110-5.15.y-devel'
riscv:driver:drm:inno
See merge request sdk/linux!177
keith.zhao [Tue, 28 Jun 2022 02:44:32 +0000 (10:44 +0800)]
riscv:driver:drm:inno
delete some unnecessary comments
fix bug about Dynamic switching resolution
Signed-off-by:keith.zhao <keith.zhao@statfivetech.com>
andy.hu [Mon, 27 Jun 2022 10:34:30 +0000 (10:34 +0000)]
Merge branch 'CR_1335_DRM_inno_driver_keith.zhao' into 'jh7110-5.15.y-devel'
Cr 1335 drm inno driver keith.zhao
See merge request sdk/linux!173
andy.hu [Mon, 27 Jun 2022 08:48:57 +0000 (08:48 +0000)]
Merge branch 'CR_1387_pdm_dma_crash_walker.chen' into 'jh7110-5.15.y-devel'
[PDM] Fix the bug that dma crash when recording repeatly
See merge request sdk/linux!172
keith.zhao [Fri, 24 Jun 2022 14:16:19 +0000 (22:16 +0800)]
fix build warning
Signed-off-by:keith.zhao <keith.zhao@statfivetech.com>
keith.zhao [Fri, 24 Jun 2022 13:55:26 +0000 (21:55 +0800)]
riscv:driver:drm:DC8200
1、update dts for vout driver code
Signed-off-by:keith.zhao <keith.zhao@statfivetech.com>
keith.zhao [Fri, 24 Jun 2022 13:51:16 +0000 (21:51 +0800)]
riscv:driver:drm:DC8200
1、support 1080P 720P 480P display mode
2、replace some FW interface by using system api
Signed-off-by:keith.zhao <keith.zhao@statfivetech.com>
Walker Chen [Mon, 27 Jun 2022 08:26:55 +0000 (16:26 +0800)]
Fix the bug that dma crash when recording repeatly
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
andy.hu [Fri, 24 Jun 2022 11:04:02 +0000 (11:04 +0000)]
Merge branch 'CR_1201_overlay_inte_jianlong' into 'jh7110-5.15.y-devel'
CR_1201 dts: starfive: Add module dts and overlay dts
See merge request sdk/linux!170
Jianlong Huang [Fri, 24 Jun 2022 10:30:07 +0000 (18:30 +0800)]
dts: starfive: Add overlay dts and fix pin conflict
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
andy.hu [Fri, 24 Jun 2022 10:16:08 +0000 (10:16 +0000)]
Merge branch 'CR_1339_HIFI4_henry.qin' into 'jh7110-5.15.y-devel'
Cr 1339 hifi4 henry.qin
See merge request sdk/linux!168
andy.hu [Fri, 24 Jun 2022 09:49:05 +0000 (09:49 +0000)]
Merge branch 'CR_1334_v4l2_readme_changhuang.liang' into 'jh7110-5.15.y-devel'
Cr 1334 v4l2 readme changhuang.liang
See merge request sdk/linux!159
changhuang.liang [Fri, 24 Jun 2022 01:58:29 +0000 (09:58 +0800)]
v4l2: modify warning and readme
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
andy.hu [Fri, 24 Jun 2022 07:39:10 +0000 (07:39 +0000)]
Merge branch 'CR_1274_SEC_JIAJIE.HO' into 'jh7110-5.15.y-devel'
crypto:starfive:Fix SHA-HMAC driver
See merge request sdk/linux!163
andy.hu [Fri, 24 Jun 2022 07:36:46 +0000 (07:36 +0000)]
Merge branch 'CR_1333_USBHOST_mason.huo' into 'jh7110-5.15.y-devel'
Cr 1333 usbhost mason.huo
See merge request sdk/linux!161
henry.qin [Fri, 24 Jun 2022 07:21:28 +0000 (15:21 +0800)]
HIFI4:Add xrp stg-syscon dts.
Signed-off-by: henry.qin <henry.qin@starfivetech.com>
samin [Fri, 17 Jun 2022 06:42:12 +0000 (14:42 +0800)]
riscv:defconfig:jh7110: Fix the problem of failing to mount fat-fs
Mounting fat-fs gives the following error:
1)FAT-fs (mmcblk0p4): codepage cp437 not found
2)FAT-fs (mmcblk0p4): IO charset iso8859-1 not found
Signed-off-by: samin <samin.guo@starfivetech.com>
jiajie.ho [Fri, 24 Jun 2022 03:23:40 +0000 (11:23 +0800)]
crypto:starfive:Fix SHA-HMAC driver
Fix HMAC setkey function and interrupt handling for SHA-HMAC
Signed-off-by: jiajie.ho <jiajie.ho@starfivetech.com>
mason.huo [Thu, 23 Jun 2022 11:07:03 +0000 (19:07 +0800)]
usb: cdns3: Optimize code style
mason.huo [Thu, 23 Jun 2022 10:36:40 +0000 (18:36 +0800)]
usb: cdns3: Set the USB_125M clock explicitly
Since the USB_125M clock is divided from pll0 clock,
and the pll0 clock changes per the cpu frequency.
So, needs to set the clock explicitly.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Fri, 24 Jun 2022 01:44:36 +0000 (09:44 +0800)]
riscv: dts: Add the USB 125M clock
Add the JH7110_USB_125M clock in dt,
so that the usb controller driver can set the clock rate.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
mason.huo [Mon, 20 Jun 2022 00:08:21 +0000 (08:08 +0800)]
riscv: deconfig: Add usb camera support for JH7110
changhuang.liang [Fri, 24 Jun 2022 01:47:45 +0000 (09:47 +0800)]
v4l2: modify Readme.txt
andy.hu [Thu, 23 Jun 2022 07:20:52 +0000 (07:20 +0000)]
Merge branch 'CR_1318_wm8960_5.15_curry.zhang' into 'jh7110-5.15.y-devel'
[Audio: wm8960] Fixed wm8960 ether playing or recording
See merge request sdk/linux!150
curry.zhang [Thu, 23 Jun 2022 05:40:08 +0000 (22:40 -0700)]
[Audio: wm8960] Fixed wm8960 ether playing or recording
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
andy.hu [Wed, 22 Jun 2022 09:55:03 +0000 (09:55 +0000)]
Merge branch 'CR_1279_I2S_wm8960_Curry.zhang' into 'jh7110-5.15.y-devel'
[Audio: PWMDAC] Add pwmdac config
See merge request sdk/linux!132
andy.hu [Tue, 21 Jun 2022 12:05:47 +0000 (12:05 +0000)]
Merge branch 'CR_1280_i2s_master_walker.chen' into 'jh7110-5.15.y-devel'
Fix the conflict between with i2s and pdm while using i2srx
See merge request sdk/linux!134
Walker Chen [Tue, 21 Jun 2022 09:36:49 +0000 (17:36 +0800)]
Fix the conflict between with i2s and pdm while using i2srx
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
curry.zhang [Tue, 21 Jun 2022 08:43:25 +0000 (01:43 -0700)]
[Audio: PWMDAC] Add pwmdac config
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
andy.hu [Tue, 21 Jun 2022 02:53:27 +0000 (02:53 +0000)]
Merge branch 'CR_1240_PWM_hal.feng' into 'jh7110-5.15.y-devel'
riscv: configs: starfive_jh7110_defconfig: Enable config 'PWM_STARFIVE_PTC'
See merge request sdk/linux!115
andy.hu [Tue, 21 Jun 2022 02:52:40 +0000 (02:52 +0000)]
Merge branch 'CR_1267_DMA_hal.feng' into 'jh7110-5.15.y-devel'
riscv: configs: starfive_jh7110_defconfig: Enable config 'DMATEST'
See merge request sdk/linux!122
andy.hu [Tue, 21 Jun 2022 02:05:19 +0000 (02:05 +0000)]
Merge branch 'CR_1279_I2S_wm8960_Curry.zhang' into 'jh7110-5.15.y-devel'
[Audio: I2S & WM8960] Porting i2s to match wm8960 driver
See merge request sdk/linux!127
curry.zhang [Mon, 20 Jun 2022 16:12:55 +0000 (09:12 -0700)]
[Audio: I2S & WM8960] Porting i2s to match wm8960 driver
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
andy.hu [Mon, 20 Jun 2022 13:14:52 +0000 (13:14 +0000)]
Merge branch 'CR_1089_TDM_walker.chen' into 'jh7110-5.15.y-devel'
Implement TDM driver for JH7110 SoC
See merge request sdk/linux!126
Walker Chen [Mon, 20 Jun 2022 12:54:16 +0000 (20:54 +0800)]
Implement TDM driver for JH7110 SoC
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Hal Feng [Mon, 20 Jun 2022 09:08:44 +0000 (17:08 +0800)]
riscv: configs: starfive_jh7110_defconfig: Enable config 'DMATEST'
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Fri, 17 Jun 2022 09:43:06 +0000 (17:43 +0800)]
riscv: configs: starfive_jh7110_defconfig: Enable config 'PWM_STARFIVE_PTC'
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
projects / platform / kernel / linux-starfive.git / log