Hans de Goede [Fri, 7 May 2010 08:28:14 +0000 (10:28 +0200)]
Prep for 0.8.0 release
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 7 May 2010 06:22:32 +0000 (08:22 +0200)]
libv4l: Update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans Verkuil [Mon, 3 May 2010 14:52:26 +0000 (16:52 +0200)]
v4l2-ctl: fix copy-paste error (wrong console message).
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 2 May 2010 14:09:22 +0000 (16:09 +0200)]
v4l2-compliance: add priority tests
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 2 May 2010 13:37:51 +0000 (15:37 +0200)]
v4l2-compliance: cleanup and add tests for multiple opens.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 2 May 2010 11:23:09 +0000 (13:23 +0200)]
qv4l2: fix oops if the device has no user controls.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 2 May 2010 10:58:46 +0000 (12:58 +0200)]
v4l2-ctl: call QUERYCAP when sleep returns.
Calling VIDIOC_QUERYCAP after sleeping is a nice way to test the USB
disconnect case.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sat, 1 May 2010 13:10:20 +0000 (15:10 +0200)]
v4l2-ctl: add prio support and a sleep option.
Add --get/set-priority to test VIDIOC_G/S_PRIORITY and add a sleep
option to let v4l2-ctl sleep for a number of seconds before closing
the file handle. Useful for testing.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sat, 1 May 2010 11:40:59 +0000 (13:40 +0200)]
libv4lcontrol: fix queryctrl handling
When enumerating the controls using V4L2_CTRL_FLAG_NEXT_CTRL then queryctrl
should always remove V4L2_CTRL_FLAG_NEXT_CTRL when returning, even if no
next control was found.
So instead of using V4L2_CTRL_FLAG_NEXT_CTRL as the 'maximum' control ID
libv4lcontrol.c should use V4L2_CTRL_ID_MASK instead (which is really the
highest possible ID).
This bug caused qv4l2 to show the user controls twice.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mats Randgaard [Fri, 30 Apr 2010 12:41:15 +0000 (14:41 +0200)]
v4l2-ctl: Add support for dv preset API.
note: Custom timings are not yet implemented.
Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans de Goede [Fri, 30 Apr 2010 10:04:38 +0000 (12:04 +0200)]
libv4l: update upside-down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 30 Apr 2010 10:03:29 +0000 (12:03 +0200)]
libv4l: Properly set errno when leaving v4l2_read
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans Verkuil [Fri, 30 Apr 2010 06:38:01 +0000 (08:38 +0200)]
libv4lcontrol: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 30 Apr 2010 06:29:09 +0000 (08:29 +0200)]
libv4lprocessing: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 30 Apr 2010 06:27:44 +0000 (08:27 +0200)]
whitebalance.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 30 Apr 2010 06:26:27 +0000 (08:26 +0200)]
gamma.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 30 Apr 2010 06:25:26 +0000 (08:25 +0200)]
autogain.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 12:59:14 +0000 (14:59 +0200)]
tinyjpeg: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 12:29:33 +0000 (14:29 +0200)]
stv0680.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 07:24:55 +0000 (09:24 +0200)]
sq905c.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 07:21:33 +0000 (09:21 +0200)]
spca561-decompress.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 07:17:48 +0000 (09:17 +0200)]
spca501.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 07:16:23 +0000 (09:16 +0200)]
sn9c20x.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 07:11:04 +0000 (09:11 +0200)]
sn9c2028-decomp.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 07:08:17 +0000 (09:08 +0200)]
sn9c10x.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 07:05:41 +0000 (09:05 +0200)]
rgbyuv.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 06:59:20 +0000 (08:59 +0200)]
v4l2-ctl: add support to poll or wait for an event.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Thu, 29 Apr 2010 06:55:53 +0000 (08:55 +0200)]
videodev2.h: update to latest v4l-dvb version.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 19:08:08 +0000 (21:08 +0200)]
pac207.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 19:05:30 +0000 (21:05 +0200)]
ov518-decomp.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 18:47:52 +0000 (20:47 +0200)]
ov511-decomp.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 18:36:57 +0000 (20:36 +0200)]
mr97310a.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 18:34:05 +0000 (20:34 +0200)]
libv4l*-priv.h: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 06:51:50 +0000 (08:51 +0200)]
libv4lconvert.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 06:44:56 +0000 (08:44 +0200)]
jidctflt.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 06:41:47 +0000 (08:41 +0200)]
helper.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 06:40:47 +0000 (08:40 +0200)]
flip.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 06:40:05 +0000 (08:40 +0200)]
crop.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 06:38:13 +0000 (08:38 +0200)]
cpia1.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 28 Apr 2010 06:36:31 +0000 (08:36 +0200)]
bayer.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Wed, 7 Apr 2010 22:17:49 +0000 (00:17 +0200)]
qv4l2: when calling TRY_FMT set pix.field to V4L2_FIELD_ANY
Setting it to V4L2_FIELD_ANY is better than using the value from
G_FMT. If that is e.g. FIELD_TOP, then 'trying' a larger height will
clamp that down to what a single field supports. Whereas FIELD_ANY
will just try to find the best field setting for the requested format.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 10:31:09 +0000 (12:31 +0200)]
v4l2convert.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 10:29:31 +0000 (12:29 +0200)]
log.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 10:27:52 +0000 (12:27 +0200)]
libv4l2.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 10:06:24 +0000 (12:06 +0200)]
libv4l2-priv.h: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 10:04:47 +0000 (12:04 +0200)]
v4l1compat.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 10:03:10 +0000 (12:03 +0200)]
log.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 09:52:06 +0000 (11:52 +0200)]
libv4l1-priv.h: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 09:49:56 +0000 (11:49 +0200)]
libv4l1.c: run through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Tue, 27 Apr 2010 09:36:01 +0000 (11:36 +0200)]
libv4l*: run headers through checkpatch.pl
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Mon, 26 Apr 2010 07:46:43 +0000 (09:46 +0200)]
qv4l2: fix include directory
Add top-level include directory to the include list for qv4l2 and
qv4l2-qt3. Also add the thread config option for qv4l2-qt3.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans de Goede [Mon, 26 Apr 2010 07:39:13 +0000 (09:39 +0200)]
libv4l: update upside-down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans Verkuil [Sat, 24 Apr 2010 11:41:21 +0000 (13:41 +0200)]
qv4l2: when refreshing controls call queryctrl before setVal.
setVal relies on correct control flags for the setWhat() call. So
we must update the control flags before calling setVal.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mauro Carvalho Chehab [Wed, 21 Apr 2010 02:11:55 +0000 (23:11 -0300)]
ir-keytable: Add support for Sony and JVC protocols
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Tue, 20 Apr 2010 10:57:51 +0000 (12:57 +0200)]
libv4l: update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 16 Apr 2010 15:29:38 +0000 (17:29 +0200)]
libv4l: update upside-down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 16 Apr 2010 13:00:02 +0000 (15:00 +0200)]
libv4l: update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 12 Apr 2010 07:39:53 +0000 (09:39 +0200)]
libv4l: update upside down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Sun, 11 Apr 2010 04:05:13 +0000 (01:05 -0300)]
ir-keycode: Add the install target
Install will copy the ir-keycode to the binary dir, copy the keymaps
into /etc/rc_keymaps, and add an example file (rc_maps.cfg.example) at
/etc/.
Currently, it is up to the user to edit the rc_maps.cfg to adapt for his
environment, and to create an udev rule, if needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 11 Apr 2010 03:58:13 +0000 (00:58 -0300)]
keytable: Add an example for rc_maps.cfg
Mauro Carvalho Chehab [Sun, 11 Apr 2010 02:26:18 +0000 (23:26 -0300)]
ir-keycode: Add support for table autoload
This function is meant to be used by udev, to allow auto-loading a
keytable during module probing. It works in conjunction with a file
with a sintax like:
cx8800 * ./keycodes/rc5_hauppauge_new
* rc-avermedia-m135a-rm-jx ./keycodes/kworld_315u
saa7134 rc-avermedia-m135a-rm-jx ./keycodes/keycodes/nec_terratec_cinergy_xs
em28xx * ./keycodes/kworld_315u
* * ./keycodes/rc5_hauppauge_new
At the config file, the "*" means that any driver (or any table) will match
that criteria.
The file is processed from the first to the last line.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 11 Apr 2010 00:55:28 +0000 (21:55 -0300)]
ir-keytable: add support for more than one protocol in a table
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 11 Apr 2010 00:46:35 +0000 (21:46 -0300)]
ir-keytable: Show enabled/current protocol(s) at read
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 11 Apr 2010 00:38:41 +0000 (21:38 -0300)]
ir-keytable: Change protocol support if required by a keytable
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 11 Apr 2010 00:16:37 +0000 (21:16 -0300)]
ir-keytable: Add the capability of changing the IR protocol
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 17:34:07 +0000 (14:34 -0300)]
ir-keytable: Don't generate segmentation fault if no devices
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 17:32:57 +0000 (14:32 -0300)]
ir-keytable: Show enabled raw decoders
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 17:21:11 +0000 (14:21 -0300)]
keytable: make functions static to avoid gcc to complain
Thanks-to: Andy Walls <awalls@md.metrocast.net> for the hint
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 15:40:03 +0000 (12:40 -0300)]
ir-keytable: Get decoder capabilities from sysfs
It will now show also the supported/current protocols, and identify
if the RC has a hardware or a software decoder:
Found /sys/class/rc/rc0/ (/dev/input/event8) with:
Driver "saa7134", raw software decoder, table "rc-avermedia-m135a-rm-jx"
Supported protocols: NEC RC-5 RC-6
Found /sys/class/rc/rc1/ (/dev/input/event9) with:
Driver "cx88xx", hardware decoder, table "rc-pixelview-mk12"
Supported protocols: other
Current protocols: NEC
Found /sys/class/rc/rc2/ (/dev/input/event10) with:
Driver "em28xx", hardware decoder, table "rc-rc5-hauppauge-new"
Supported protocols: NEC RC-5
Current protocols: RC-5
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 14:43:41 +0000 (11:43 -0300)]
ir-keytable: Put all driver values into a struct
Now, instead of a series of static vars, all device information
is stored at rc_dev struct. With this change, get_attribs will
now fill the struct with all information that were retrieved from
the device sysfs nodes.
With this change, it is now easier to get additional info from the
RC sysfs nodes, and to provide a set_attribs function to change
data, like the supported protocols.
As a bonus, the list mode now provides more info about the RC
devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 14:20:45 +0000 (11:20 -0300)]
ir-keytable: remove gcc warning noise
gcc handling on -Wmissing-prototypes is stupid. It generates this warning:
keytable.c:366: warning: no previous prototype for ‘read_sysfs_uevents’
If the prototype for read_sysfs_uevents() is not declared twice.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 14:17:13 +0000 (11:17 -0300)]
Remove unused vars from keytable and let gcc warn about that on Make.rules
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 13:52:55 +0000 (10:52 -0300)]
ir-keytable: List all RC devices if called without parameters
Now, if called without any parameters, it will list the all RC
devices and the corresponding input event interface:
Found /sys/class/rc/rc0/: /dev/input/event8
Found /sys/class/rc/rc1/: /dev/input/event9
Found /sys/class/rc/rc2/: /dev/input/event10
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 10 Apr 2010 13:38:13 +0000 (10:38 -0300)]
keytable: Improve parser to get multiple results
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 8 Apr 2010 02:32:01 +0000 (23:32 -0300)]
Rename IR devices to just rc? instead or rcrcv?
/sys/class/rc/rc? makes more sense than rcrcv?, as the same device may
share some common blocks with a IR transmitter.
As this were changed upstream, a similar patch needs to be added at the
utils.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 28 Mar 2010 03:03:03 +0000 (00:03 -0300)]
keytable: Rename Remote Controller sysfs nodes
While not too late, the sysfs name of the nodes that control Remote
Controllers were renamed to RC, to better reflect that the code can be used
not only by IR but also for other kinds of Remote Controllers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 28 Mar 2010 03:01:46 +0000 (00:01 -0300)]
keytable: Fix error handling for sysfs node seek
Avoids a segmentation fault if the node doesn't exist.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 5 Apr 2010 15:38:35 +0000 (17:38 +0200)]
qv4l2: fix memory corruption and a wrong close sequence
When allocating memory for a string control the wrong size was used.
When closing the video device (e.g. during exit) the signal mapper was
deleted after the dialog was destroyed. This caused lostFocus events to arrive
in the signal mapper's handler which then tried to access the already closed
video device. And that caused a confusing error message to appear.
This is now fixed by deleting the signal mapper first.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 4 Apr 2010 12:14:20 +0000 (14:14 +0200)]
v4l2-ctl: improve --log-status handling
Just search for 'START STATUS' instead of 'START STATUS CARD #'.
It doesn't always make sense to talk about 'CARD'.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 4 Apr 2010 10:45:02 +0000 (12:45 +0200)]
qv4l2: user controls did not obey the update flag.
The GUI now refreshes user controls correctly if they set the
flag V4L2_CTRL_FLAG_UPDATE.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sat, 3 Apr 2010 13:52:23 +0000 (15:52 +0200)]
v4l2-ctl: fix handling of buttons, write-only controls and int64/string
- Don't attempt to read button controls or write-only controls
when make the control list.
- If a user or old-style private control is of type int64 or string,
then use the extended control mechanism for those control classes.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sat, 3 Apr 2010 13:37:02 +0000 (15:37 +0200)]
qv4l2: disable grabbed controls in the GUI
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sat, 3 Apr 2010 13:15:10 +0000 (15:15 +0200)]
qv4l2: add string control support
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sat, 3 Apr 2010 10:40:47 +0000 (12:40 +0200)]
qv4l2: move qv4l2-qt3 to contrib, rename qv4l2-qt4 directory to qv4l2.
qv4l2-qt3 is effectively unmaintained. Move it to contrib and rename the
executable to qv4l2-qt3. If someone needs a Qt3 tool, then they can use this.
The qv4l2-qt4 directory can now be renamed to qv4l2 and the Makefile is
modified to only build if qt4 is installed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans de Goede [Thu, 1 Apr 2010 06:37:29 +0000 (08:37 +0200)]
libv4l: update upside down device list
Hans de Goede [Mon, 29 Mar 2010 08:54:23 +0000 (10:54 +0200)]
libv4l: update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 22 Mar 2010 08:51:13 +0000 (09:51 +0100)]
libv4l: update upside-down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Sun, 21 Mar 2010 20:13:02 +0000 (17:13 -0300)]
keytable: Fix a memory allocation trouble
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 14 Mar 2010 02:21:29 +0000 (23:21 -0300)]
keytable: split each keytable operation into a separate function
This change will allow an easier handling for the new auto mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Fri, 19 Mar 2010 06:28:08 +0000 (07:28 +0100)]
libv4l: update upside down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 19 Mar 2010 06:04:21 +0000 (07:04 +0100)]
Change version to 0.7.92-test
Gregor Jasny [Tue, 16 Mar 2010 08:28:59 +0000 (09:28 +0100)]
README.lib: document how to port apps to libv4l
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans Verkuil [Sat, 13 Mar 2010 22:19:48 +0000 (23:19 +0100)]
qv4l2: fix UVC support
The workaround for drivers using videobuf broke the UVC support.
Fix this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Mauro Carvalho Chehab [Sun, 14 Mar 2010 01:52:19 +0000 (22:52 -0300)]
keytable: update all keycode tables with the most recent kernel ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 14 Mar 2010 01:48:56 +0000 (22:48 -0300)]
keytable: Adds parser for table name and type
While here, make parser less pedantic, by accepting blank
lines and comments. Also, if parsing fails, print the
number of the wrong line.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 14 Mar 2010 01:16:23 +0000 (22:16 -0300)]
keytable: Parse also the IR_TABLE macro
The IR_TABLE macro provides two useful information: the type
of the IR table, and the table name, as reported by kernel uevent,
at node /sys/class/irrcv/irrcv0/uevent. For example:
NAME="rc5_hauppauge_new"
This information can be useful to allow userspace to know that
a table needs to be replaced by another.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 14 Mar 2010 00:50:12 +0000 (21:50 -0300)]
keytable: Rename table read/write to --read and --write
While here, improve error handling and application output messages.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 13 Mar 2010 22:43:22 +0000 (19:43 -0300)]
keytable: Cosmetic CodingStyle changes
While here, fix one warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 13 Mar 2010 03:45:47 +0000 (00:45 -0300)]
keytable: retrieves uevent info from the driver
Now, with the latest ir-core patches, it will properly return
the kernel driver that implements IR, and the loaded table:
Kernel driver "em28xx", using table "rc5_hauppauge_new"
This patch prepares the addition of a new command to ir-keytable
to allow it to automatically replace a table, if called via udev.
While here, fixed some bugs on malloc/free stuff.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 13 Mar 2010 03:30:49 +0000 (00:30 -0300)]
keytable: free uevent struct after usage
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / platform / upstream / v4l-utils.git / log