review.tizen.org Git - platform/kernel/linux-rpi.git/log

perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage

commit 057ae59f5a1d924511beb1b09f395bdb316cfd03 upstream.

Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.

PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range. Fix some missing PGE
usage.

Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 839598176b0554 ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: free exchange changeset on failures

commit da5e817d9d75422eaaa05490d0b9a5e328fc1a51 upstream.

Fstests runs on my VMs have show several kmemleak reports like the following.

  unreferenced object 0xffff88811ae59080 (size 64):
    comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s)
    hex dump (first 32 bytes):
      00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00  ................
      90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff  ................
    backtrace:
      [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs]
      [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs]
      [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs]
      [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs]
      [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs]
      [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs]
      [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs]
      [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs]
      [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0
      [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700
      [<000000002567ba53>] iomap_dio_rw+0x5/0x20
      [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs]
      [<000000005eb3d845>] new_sync_write+0x106/0x180
      [<000000003fb505bf>] vfs_write+0x24d/0x2f0
      [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0
      [<000000003eba3fdf>] do_syscall_64+0x43/0x90

In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata()
fail the allocated extent_changeset will not be freed.

So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space()
free the allocated extent_changeset to get rid of the allocated memory.

The issue currently only happens in the direct IO write path, but only
after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO
write into NOCOW range"), and also at defrag_one_locked_target(). Every
other place is always calling extent_changeset_free() even if its call
to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has
failed.

CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling

commit 8289ed9f93bef2762f9184e136d994734b16d997 upstream.

I hit the BUG_ON() with generic/475 test case, and to my surprise, all
callers of btrfs_del_root_ref() are already aborting transaction, thus
there is not need for such BUG_ON(), just go to @out label and caller
will properly handle the error.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix re-dirty process of tree-log nodes

commit 84c25448929942edacba905cecc0474e91114e7a upstream.

There is a report of a transaction abort of -EAGAIN with the following
script.

  #!/bin/sh

  for d in sda sdb; do
          mkfs.btrfs -d single -m single -f /dev/\${d}
  done

  mount /dev/sda /mnt/test
  mount /dev/sdb /mnt/scratch

  for dir in test scratch; do
          echo 3 >/proc/sys/vm/drop_caches
          fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \
                  --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \
                  --group_reporting |& tee /dev/shm/fio.\${dir}
          echo 3 >/proc/sys/vm/drop_caches
  done

  for d in sda sdb; do
          umount /dev/\${d}
  done

The stack trace is shown in below.

  [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction)
  [3310.968060] BTRFS info (device sda): forced readonly
  [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction.
  [3310.968065] ------------[ cut here ]------------
  [3310.968066] BTRFS: Transaction aborted (error -11)
  [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8
  [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1
  [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021
  [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8
  [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282
  [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027
  [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00
  [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48
  [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00
  [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58
  [3310.968154] FS:  00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000
  [3310.968157] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0
  [3310.968160] PKRU: 55555554
  [3310.968161] Call Trace:
  [3310.968167]  ? dput+0xd4/0x300
  [3310.968174]  btrfs_sync_file+0x3f1/0x490
  [3310.968180]  __x64_sys_fsync+0x33/0x60
  [3310.968185]  do_syscall_64+0x3b/0x90
  [3310.968190]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [3310.968194] RIP: 0033:0x7efe6557329b
  [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
  [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b
  [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006
  [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010
  [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980
  [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000
  [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]---
  [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown

The abort occurs because of a write hole while writing out freeing tree
nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree
node to ensure btrfs can write the region and does not leave a hole on
write on a zoned device. The current code fails to re-dirty a node
when the tree-log tree's depth is greater or equal to 2. That leads to
a transaction abort with -EAGAIN.

Fix the issue by properly re-dirtying a node on walking up the tree.

Fixes: d3575156f662 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.12+
Link: https://github.com/kdave/btrfs-progs/issues/415
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: clear extent buffer uptodate when we fail to write it

commit c2e39305299f0118298c2201f6d6cc7d3485f29e upstream.

I got dmesg errors on generic/281 on our overnight fstests.  Looking at
the history this happens occasionally, with errors like this

  WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
  CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G        W         5.16.0-rc2+ #469
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Workqueue: btrfs-cache btrfs_work_helper
  RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
  RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
  RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
  RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
  RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
  R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
  R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
  FS:  0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
  Call Trace:

   extent_buffer_test_bit+0x3f/0x70
   free_space_test_bit+0xa6/0xc0
   load_free_space_tree+0x1d6/0x430
   caching_thread+0x454/0x630
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? rcu_read_lock_sched_held+0x12/0x60
   ? lock_release+0x1f0/0x2d0
   btrfs_work_helper+0xf2/0x3e0
   ? lock_release+0x1f0/0x2d0
   ? finish_task_switch.isra.0+0xf9/0x3a0
   process_one_work+0x270/0x5a0
   worker_thread+0x55/0x3c0
   ? process_one_work+0x5a0/0x5a0
   kthread+0x174/0x1a0
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we're trying to read from a extent buffer page that
is !PageUptodate.  This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.

Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.

CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Format log strings only if needed

commit 69002c8ce914ef0ae22a6ea14b43bb30b9a9a6a8 upstream.

Commit 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug
logs") introduced unconditional log string formatting to ql_dbg() even if
ql_dbg_log event is disabled. It harms performance because some strings are
formatted in fastpath and/or interrupt context.

Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com
Fixes: 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs")
Cc: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix crash on unload of cifs_arc4.ko

commit 51a08bdeca27988a17c87b87d8e64ffecbd2a172 upstream.

The exit function is wrongly placed in the __init section and this leads
to a crash when the module is unloaded. Just remove both the init and
exit functions since this module does not need them.

Fixes: 71c02863246167b3d ("cifs: fork arc4 and create a separate module...")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Handle missing errors in snd_pcm_oss_change_params*()

commit 6665bb30a6b1a4a853d52557c05482ee50e71391 upstream.

A couple of calls in snd_pcm_oss_change_params_locked() ignore the
possible errors. Catch those errors and abort the operation for
avoiding further problems.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211201073606.11660-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Limit the period size to 16MB

commit 8839c8c0f77ab8fc0463f4ab8b37fca3f70677c2 upstream.

Set the practical limit to the period size (the fragment shift in OSS)
instead of a full 31bit; a too large value could lead to the exhaust
of memory as we allocate temporary buffers of the period size, too.

As of this patch, we set to 16MB limit, which should cover all use
cases.

Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Fix negative period/buffer sizes

commit 9d2479c960875ca1239bcb899f386970c13d9cfe upstream.

The period size calculation in OSS layer may receive a negative value
as an error, but the code there assumes only the positive values and
handle them with size_t. Due to that, a too big value may be passed
to the lower layers.

This patch changes the code to handle with ssize_t and adds the proper
error checks appropriately.

Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix quirk for TongFang PHxTxX1

commit 619764cc2ec9ce1283a8bbcd89a1376a7c68293b upstream.

This fixes the SND_PCI_QUIRK(...) of the TongFang PHxTxX1 barebone. This
fixes the issue of sound not working after s3 suspend.

When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020. Setting the value manually makes the sound work again. This patch
does this automatically.

While being on it, I also fixed the comment formatting of the quirk and
shortened variable and function names.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: dd6dd6e3c791 ("ALSA: hda/realtek: Add quirk for TongFang PHxTxX1")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202165010.876431-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform

commit d7f32791a9fcf0dae8b073cdea9b79e29098c5f4 upstream.

Lenovo ALC897 platform had headset Mic.
This patch enable supported headset Mic.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/baab2c2536cb4cc18677a862c6f6d840@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ctl: Fix copy of updated id with element read/write

commit b6409dd6bdc03aa178bbff0d80db2a30d29b63ac upstream.

When control_compat.c:copy_ctl_value_to_user() is used, by
ctl_elem_read_user() & ctl_elem_write_user(), it must also copy back the
snd_ctl_elem_id value that may have been updated (filled in) by the call
to snd_ctl_elem_read/snd_ctl_elem_write().

This matches the functionality provided by snd_ctl_elem_read_user() and
snd_ctl_elem_write_user(), via snd_ctl_build_ioff().

Without this, and without making additional calls to snd_ctl_info()
which are unnecessary when using the non-compat calls, a userspace
application will not know the numid value for the element and
consequently will not be able to use the poll/read interface on the
control file to determine which elements have updates.

Signed-off-by: Alan Young <consult.awy@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202150607.543389-1-consult.awy@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: bdi: initialize bdi_min_ratio when bdi is unregistered

commit 3c376dfafbf7a8ea0dea212d095ddd83e93280bb upstream.

Initialize min_ratio if it is set during bdi unregistration. This can
prevent problems that may occur a when bdi is removed without resetting
min_ratio.

For example.
1) insert external sdcard
2) set external sdcard's min_ratio 70
3) remove external sdcard without setting min_ratio 0
4) insert external sdcard
5) set external sdcard's min_ratio 70 << error occur(can't set)

Because when an sdcard is removed, the present bdi_min_ratio value will
remain. Currently, the only way to reset bdi_min_ratio is to reboot.

[akpm@linux-foundation.org: tweak comment and coding style]

Link: https://lkml.kernel.org/r/20211021161942.5983-1-mj0123.lee@samsung.com
Signed-off-by: Manjong Lee <mj0123.lee@samsung.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Changheun Lee <nanich.lee@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <seunghwan.hyun@samsung.com>
Cc: <sookwan7.kim@samsung.com>
Cc: <yt0928.kim@samsung.com>
Cc: <junho89.kim@samsung.com>
Cc: <jisoo2146.oh@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/slub: fix endianness bug for alloc/free_traces attributes

commit 005a79e5c254c3f60ec269a459cc41b55028c798 upstream.

On big-endian s390, the alloc/free_traces attributes produce endless
output, because of always 0 idx in slab_debugfs_show().

idx is de-referenced from *v, which points to a loff_t value, with

unsigned int idx = *(unsigned int *)v;

This will only give the upper 32 bits on big-endian, which remain 0.

Instead of only fixing this de-reference, during discussion it seemed
more appropriate to change the seq_ops so that they use an explicit
iterator in private loc_track struct.

This patch adds idx to loc_track, which will also fix the endianness
bug.

Link: https://lore.kernel.org/r/20211117193932.4049412-1-gerald.schaefer@linux.ibm.com
Link: https://lkml.kernel.org/r/20211126171848.17534-1-gerald.schaefer@linux.ibm.com
Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reported-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/core: fix fake load reports due to uninterruptible sleeps

commit 70e9274805fccfd175d0431a947bfd11ee7df40e upstream.

Because DAMON sleeps in uninterruptible mode, /proc/loadavg reports fake
load while DAMON is turned on, though it is doing nothing. This can
confuse users[1]. To avoid the case, this commit makes DAMON sleeps in
idle mode.

[1] https://lore.kernel.org/all/11868371.O9o76ZdvQC@natalenko.name/

Link: https://lkml.kernel.org/r/20211126145015.15862-3-sj@kernel.org
Fixes: 2224d8485492 ("mm: introduce Data Access MONitor (DAMON)")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: implement usleep_idle_range()

commit e4779015fd5d2fb8390c258268addff24d6077c7 upstream.

Patch series "mm/damon: Fix fake /proc/loadavg reports", v3.

This patchset fixes DAMON's fake load report issue.  The first patch
makes yet another variant of usleep_range() for this fix, and the second
patch fixes the issue of DAMON by making it using the newly introduced
function.

This patch (of 2):

Some kernel threads such as DAMON could need to repeatedly sleep in
micro seconds level.  Because usleep_range() sleeps in uninterruptible
state, however, such threads would make /proc/loadavg reports fake load.

To help such cases, this commit implements a variant of usleep_range()
called usleep_idle_range().  It is same to usleep_range() but sets the
state of the current task as TASK_IDLE while sleeping.

Link: https://lkml.kernel.org/r/20211126145015.15862-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211126145015.15862-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Wait for IPIs to be delivered when handling Hyper-V TLB flush hypercall

commit 1ebfaa11ebb5b603a3c3f54b2e84fcf1030f5a14 upstream.

Prior to commit 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use
tlb_flush_guest()"), kvm_hv_flush_tlb() was using 'KVM_REQ_TLB_FLUSH |
KVM_REQUEST_NO_WAKEUP' when making a request to flush TLBs on other vCPUs
and KVM_REQ_TLB_FLUSH is/was defined as:

(0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)

so KVM_REQUEST_WAIT was lost. Hyper-V TLFS, however, requires that
"This call guarantees that by the time control returns back to the
caller, the observable effects of all flushes on the specified virtual
processors have occurred." and without KVM_REQUEST_WAIT there's a small
chance that the vCPU making the TLB flush will resume running before
all IPIs get delivered to other vCPUs and a stale mapping can get read
there.

Fix the issue by adding KVM_REQUEST_WAIT flag to KVM_REQ_TLB_FLUSH_GUEST:
kvm_hv_flush_tlb() is the sole caller which uses it for
kvm_make_all_cpus_request()/kvm_make_vcpus_request_mask() where
KVM_REQUEST_WAIT makes a difference.

Cc: stable@kernel.org
Fixes: 0baedd792713 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211209102937.584397-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req

commit 3244867af8c065e51969f1bffe732d3ebfd9a7d2 upstream.

Do not bail early if there are no bits set in the sparse banks for a
non-sparse, a.k.a. "all CPUs", IPI request.  Per the Hyper-V spec, it is
legal to have a variable length of '0', e.g. VP_SET's BankContents in
this case, if the request can be serviced without the extra info.

  It is possible that for a given invocation of a hypercall that does
  accept variable sized input headers that all the header input fits
  entirely within the fixed size header. In such cases the variable sized
  input header is zero-sized and the corresponding bits in the hypercall
  input should be set to zero.

Bailing early results in KVM failing to send IPIs to all CPUs as expected
by the guest.

Fixes: 214ff83d4473 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211207220926.718794-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't WARN if userspace mucks with RCX during string I/O exit

commit d07898eaf39909806128caccb6ebd922ee3edd69 upstream.

Replace a WARN with a comment to call out that userspace can modify RCX
during an exit to userspace to handle string I/O. KVM doesn't actually
support changing the rep count during an exit, i.e. the scenario can be
ignored, but the WARN needs to go as it's trivial to trigger from
userspace.

Cc: stable@vger.kernel.org
Fixes: 3b27de271839 ("KVM: x86: split the two parts of emulator_pio_in")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211025201311.1881846-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: fix XDP rx queues registering

commit a50e659b2a1be14784e80f8492aab177e67c53a2 upstream.

The registration of XDP queue information is incorrect because the
RX queue id we use is invalid. When port->id == 0 it appears to works
as expected yet it's no longer the case when port->id != 0.

The problem arised while using a recent kernel version on the
MACCHIATOBin. This board has several ports:
* eth0 and eth1 are 10Gbps interfaces ; both ports has port->id == 0;
* eth2 is a 1Gbps interface with port->id != 0.

Code from xdp-tutorial (more specifically advanced03-AF_XDP) was used
to test packet capture and injection on all these interfaces. The XDP
kernel was simplified to:

SEC("xdp_sock")
int xdp_sock_prog(struct xdp_md *ctx)
{
int index = ctx->rx_queue_index;

/* A set entry here means that the correspnding queue_id
* has an active AF_XDP socket bound to it. */
if (bpf_map_lookup_elem(&xsks_map, &index))
return bpf_redirect_map(&xsks_map, index, 0);

return XDP_PASS;
}

Starting the program using:

./af_xdp_user -d DEV

Gives the following result:

* eth0 : ok
* eth1 : ok
* eth2 : no capture, no injection

Investigating the issue shows that XDP rx queues for eth2 are wrong:
XDP expects their id to be in the range [0..3] but we found them to be
in the range [32..35].

Trying to force rx queue ids using:

./af_xdp_user -d eth2 -Q 32

fails as expected (we shall not have more than 4 queues).

When we register the XDP rx queue information (using
xdp_rxq_info_reg() in function mvpp2_rxq_init()) we tell it to use
rxq->id as the queue id. This value is computed as:

rxq->id = port->id * max_rxq_count + queue_id

where max_rxq_count depends on the device version. In the MACCHIATOBin
case, this value is 32, meaning that rx queues on eth2 are numbered
from 32 to 35 - there are four of them.

Clearly, this is not the per-port queue id that XDP is expecting:
it wants a value in the range [0..3]. It shall directly use queue_id
which is stored in rxq->logic_rxq -- so let's use that value instead.

rxq->id is left untouched ; its value is indeed valid but it should
not be used in this context.

This is consistent with the remaining part of the code in
mvpp2_rxq_init().

With this change, packet capture is working as expected on all the
MACCHIATOBin ports.

Fixes: b27db2274ba8 ("mvpp2: use page_pool allocator")
Signed-off-by: Louis Amas <louis.amas@eho.link>
Signed-off-by: Emmanuel Deloget <emmanuel.deloget@eho.link>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20211207143423.916334-1-louis.amas@eho.link
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: fq_pie: prevent dismantle issue

commit 61c2402665f1e10c5742033fce18392e369931d7 upstream.

For some reason, fq_pie_destroy() did not copy
working code from pie_destroy() and other qdiscs,
thus causing elusive bug.

Before calling del_timer_sync(&q->adapt_timer),
we need to ensure timer will not rearm itself.

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579
(t=10501 jiffies g=13085 q=3989)
NMI backtrace for cpu 0
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
print_cpu_stall kernel/rcu/tree_stall.h:627 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:711 [inline]
rcu_pending kernel/rcu/tree.c:3878 [inline]
rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597
update_process_times+0x16d/0x200 kernel/time/timer.c:1785
tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:write_comp_data kernel/kcov.c:221 [inline]
RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273
Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00
RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000
RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003
RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000
pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418
fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
expire_timers kernel/time/timer.c:1466 [inline]
__run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734
__run_timers kernel/time/timer.c:1715 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913
smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>

Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Cc: Sachin D. Patil <sdp.sachin@gmail.com>
Cc: V. Saicharan <vsaicharan1998@gmail.com>
Cc: Mohit Bhasi <mohitbhasi1998@gmail.com>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Link: https://lore.kernel.org/r/20211209084937.3500020-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering

commit e8b1d7698038e76363859fb47ae0a262080646f5 upstream.

Avoid a memory leak if there is not a CPU port defined.

Fixes: 8d5f7954b7c8 ("net: dsa: felix: break at first CPU port during init and teardown")
Addresses-Coverity-ID: 1492897 ("Resource leak")
Addresses-Coverity-ID: 1492899 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211209110538.11585-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: error handling for serdes_power functions

commit 0416e7af2369b0d12a28dea8d30b104df9a6953d upstream.

Added default case to handle undefined cmode scenario in
mv88e6393x_serdes_power() and mv88e6393x_serdes_power() methods.

Addresses-Coverity: 1494644 ("Uninitialized scalar variable")
Fixes: 21635d9203e1c (net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X)
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211209041552.9810-1-amhamza.mgc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcm4908: Handle dma_set_coherent_mask error codes

commit 128f6ec95a282b2d8bc1041e59bf65810703fa44 upstream.

The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.

Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: fix netns refcount leak in devlink_nl_cmd_reload()

commit 4dbb0dad8e63fcd0b5a117c2861d2abe7ff5f186 upstream.

While preparing my patch series adding netns refcount tracking,
I spotted bugs in devlink_nl_cmd_reload()

Some error paths forgot to release a refcount on a netns.

To fix this, we can reduce the scope of get_net()/put_net()
section around the call to devlink_reload().

Fixes: ccdf07219da6 ("devlink: Add reload action option to devlink reload command")
Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Moshe Shemesh <moshe@mellanox.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211205192822.1741045-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Correct guard on eager buffer deallocation

commit 9292f8f9a2ac42eb320bced7153aa2e63d8cc13a upstream.

The code tests the dma address which legitimately can be 0.

The code should test the kernel logical address to avoid leaking eager
buffer allocations that happen to map to a dma address of 0.

Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled")
Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: Fix reporting when setting descriptor count

commit 1a1aa356ddf3f16539f5962c01c5f702686dfc15 upstream.

iavf_set_ringparams doesn't communicate to the user that

1. The user requested descriptor count is out of range. Instead it
   just quietly sets descriptors to the "clamped" value and calls it
   done. This makes it look an invalid value was successfully set as
   the descriptor count when this isn't actually true.

2. The user provided descriptor count needs to be inflated for alignment
   reasons.

This behavior is confusing. The ice driver has already addressed this
by rejecting invalid values for descriptor count and
messaging for alignment adjustments.
Do the same thing here by adding the error and info messages.

Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: restore MSI state on reset

commit 7e4dcc13965c57869684d57a1dc6dd7be589488c upstream.

If the PF experiences an FLR, the VF's MSI and MSI-X configuration will
be conveniently and silently removed in the process. When this happens,
reset recovery will appear to complete normally but no traffic will
pass. The netdev watchdog will helpfully notify everyone of this issue.

To prevent such public embarrassment, restore MSI configuration at every
reset. For normal resets, this will do no harm, but for VF resets
resulting from a PF FLR, this will keep the VF working.

Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: annotate data-races around ct->timeout

commit 802a7dc5cf1bef06f7b290ce76d478138408d6b1 upstream.

(struct nf_conn)->timeout can be read/written locklessly,
add READ_ONCE()/WRITE_ONCE() to prevent load/store tearing.

BUG: KCSAN: data-race in __nf_conntrack_alloc / __nf_conntrack_find_get

write to 0xffff888132e78c08 of 4 bytes by task 6029 on cpu 0:
__nf_conntrack_alloc+0x158/0x280 net/netfilter/nf_conntrack_core.c:1563
init_conntrack+0x1da/0xb30 net/netfilter/nf_conntrack_core.c:1635
resolve_normal_ct+0x502/0x610 net/netfilter/nf_conntrack_core.c:1746
nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901
ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414
nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline]
nf_hook_slow+0x72/0x170 net/netfilter/core.c:619
nf_hook include/linux/netfilter.h:262 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324
inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402
tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline]
tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680
__tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864
tcp_push_pending_frames include/net/tcp.h:1897 [inline]
tcp_data_snd_check+0x62/0x2e0 net/ipv4/tcp_input.c:5452
tcp_rcv_established+0x880/0x10e0 net/ipv4/tcp_input.c:5947
tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521
sk_backlog_rcv include/net/sock.h:1030 [inline]
__release_sock+0xf2/0x270 net/core/sock.c:2768
release_sock+0x40/0x110 net/core/sock.c:3300
sk_stream_wait_memory+0x435/0x700 net/core/stream.c:145
tcp_sendmsg_locked+0xb85/0x25a0 net/ipv4/tcp.c:1402
tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1440
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:644
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
__sys_sendto+0x21e/0x2c0 net/socket.c:2036
__do_sys_sendto net/socket.c:2048 [inline]
__se_sys_sendto net/socket.c:2044 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2044
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888132e78c08 of 4 bytes by task 17446 on cpu 1:
nf_ct_is_expired include/net/netfilter/nf_conntrack.h:286 [inline]
____nf_conntrack_find net/netfilter/nf_conntrack_core.c:776 [inline]
__nf_conntrack_find_get+0x1c7/0xac0 net/netfilter/nf_conntrack_core.c:807
resolve_normal_ct+0x273/0x610 net/netfilter/nf_conntrack_core.c:1734
nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901
ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414
nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline]
nf_hook_slow+0x72/0x170 net/netfilter/core.c:619
nf_hook include/linux/netfilter.h:262 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324
inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402
__tcp_send_ack+0x1fd/0x300 net/ipv4/tcp_output.c:3956
tcp_send_ack+0x23/0x30 net/ipv4/tcp_output.c:3962
__tcp_ack_snd_check+0x2d8/0x510 net/ipv4/tcp_input.c:5478
tcp_ack_snd_check net/ipv4/tcp_input.c:5523 [inline]
tcp_rcv_established+0x8c2/0x10e0 net/ipv4/tcp_input.c:5948
tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521
sk_backlog_rcv include/net/sock.h:1030 [inline]
__release_sock+0xf2/0x270 net/core/sock.c:2768
release_sock+0x40/0x110 net/core/sock.c:3300
tcp_sendpage+0x94/0xb0 net/ipv4/tcp.c:1114
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
rds_tcp_xmit+0x376/0x5f0 net/rds/tcp_send.c:118
rds_send_xmit+0xbed/0x1500 net/rds/send.c:367
rds_send_worker+0x43/0x200 net/rds/threads.c:200
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
worker_thread+0x616/0xa70 kernel/workqueue.c:2445
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30

value changed: 0x00027cc2 -> 0x00000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17446 Comm: kworker/u4:5 Tainted: G W 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: krdsd rds_send_worker

Note: I chose an arbitrary commit for the Fixes: tag,
because I do not think we need to backport this fix to very old kernels.

Fixes: e37542ba111f ("netfilter: conntrack: avoid possible false sharing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_exthdr: break evaluation if setting TCP option fails

commit 962e5a40358787105f126ab1dc01604da3d169e9 upstream.

Break rule evaluation on malformed TCP options.

Fixes: 99d1712bc41c ("netfilter: exthdr: tcp option set support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp: using datalen to cap max gso segments

commit 158390e45612ef0fde160af0826f1740c36daf21 upstream.

The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS,
this is checked in udp_send_skb():

    if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) {
        kfree_skb(skb);
        return -EINVAL;
    }

skb->len contains network and transport header len here, we should use
only data len instead.

Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/900742e5-81fb-30dc-6e0b-375c6cdd7982@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seg6: fix the iif in the IPv6 socket control block

commit ae68d93354e5bf5191ee673982251864ea24dd5c upstream.

When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):

IPCB(skb)->iif = skb->skb_iif;

If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):

memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));

The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).

Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).

As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.

To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.

Fixes: ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: Fix memory leak in nfp_cpp_area_cache_add()

commit c56c96303e9289cc34716b1179597b6f470833de upstream.

In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a
CPP area structure. But in line 807 (#2), when the cache is allocated
failed, this CPP area structure is not freed, which will result in
memory leak.

We can fix it by freeing the CPP area when the cache is allocated
failed (#2).

792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size)
793 {
794 struct nfp_cpp_area_cache *cache;
795 struct nfp_cpp_area *area;

800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0),
801 0, size);
// #1: allocates and initializes

802 if (!area)
803 return -ENOMEM;

805 cache = kzalloc(sizeof(*cache), GFP_KERNEL);
806 if (!cache)
807 return -ENOMEM; // #2: missing free

817 return 0;
818 }

Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: make tx_rebalance_counter an atomic

commit dac8e00fb640e9569cdeefd3ce8a75639e5d0711 upstream.

KCSAN reported a data-race [1] around tx_rebalance_counter
which can be accessed from different contexts, without
the protection of a lock/mutex.

[1]
BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor

write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0:
bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613
bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949
do_set_master net/core/rtnetlink.c:2521 [inline]
__rtnl_newlink net/core/rtnetlink.c:3475 [inline]
rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1:
bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
worker_thread+0x616/0xa70 kernel/workqueue.c:2445
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30

value changed: 0x00000001 -> 0x00000064

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bond1 bond_alb_monitor

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: do not perform operations on net devices being unregistered

commit dde91ccfa25fd58f64c397d91b81a4b393100ffa upstream.

There is a short period between a net device starts to be unregistered
and when it is actually gone. In that time frame ethtool operations
could still be performed, which might end up in unwanted or undefined
behaviours[1].

Do not allow ethtool operations after a net device starts its
unregistration. This patch targets the netlink part as the ioctl one
isn't affected: the reference to the net device is taken and the
operation is executed within an rtnl lock section and the net device
won't be found after unregister.

[1] For example adding Tx queues after unregister ends up in NULL
    pointer exceptions and UaFs, such as:

      BUG: KASAN: use-after-free in kobject_get+0x14/0x90
      Read of size 1 at addr ffff88801961248c by task ethtool/755

      CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014
      Call Trace:
       dump_stack_lvl+0x57/0x72
       print_address_description.constprop.0+0x1f/0x140
       kasan_report.cold+0x7f/0x11b
       kobject_get+0x14/0x90
       kobject_add_internal+0x3d1/0x450
       kobject_init_and_add+0xba/0xf0
       netdev_queue_update_kobjects+0xcf/0x200
       netif_set_real_num_tx_queues+0xb4/0x310
       veth_set_channels+0x1c3/0x550
       ethnl_set_channels+0x524/0x610

Fixes: 041b1c5d4a53 ("ethtool: helper functions for netlink interface")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20211203101318.435618-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: ignore dropped packets during init

commit 28dc1b86f8ea9fd6f4c9e0b363db73ecabf84e22 upstream.

If the hardware is constantly receiving unicast or broadcast packets
during driver load, the device previously counted many GLV_RDPC (VSI
dropped packets) events during init. This causes confusing dropped
packet statistics during driver load. The dropped packets counter
incrementing does stop once the driver finishes loading.

Avoid this problem by baselining our statistics at the end of driver
open instead of the end of probe.

Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix the off-by-two error in range markings

commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.

The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):

  // 1. Passes the verifier:
  if (data + 8 > data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

  // 2. Rejected by the verifier (should still pass):
  if (data + 7 >= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:

  // 3. Rejected by the verifier, but the check is stricter than in #1.
  if (data + 8 >= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.

Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.

commit 79364031c5b4365ca28ac0fa00acfab5bf465be1 upstream.

The initial implementation of migrate_disable() for mainline was a
wrapper around preempt_disable(). RT kernels substituted this with a
real migrate disable implementation.

Later on mainline gained true migrate disable support, but neither
documentation nor affected code were updated.

Remove stale comments claiming that migrate_disable() is PREEMPT_RT only.

Don't use __this_cpu_inc() in the !PREEMPT_RT path because preemption is
not disabled and the RMW operation can be preempted.

Fixes: 74d862b682f51 ("sched: Make migrate_disable/enable() independent of RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211127163200.10466-3-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, sockmap: Attach map progs to psock early for feature probes

commit 38207a5e81230d6ffbdd51e5fa5681be5116dcae upstream.

When a TCP socket is added to a sock map we look at the programs attached
to the map to determine what proto op hooks need to be changed. Before
the patch in the 'fixes' tag there were only two categories -- the empty
set of programs or a TX policy. In any case the base set handled the
receive case.

After the fix we have an optimized program for receive that closes a small,
but possible, race on receive. This program is loaded only when the map the
psock is being added to includes a RX policy. Otherwise, the race is not
possible so we don't need to handle the race condition.

In order for the call to sk_psock_init() to correctly evaluate the above
conditions all progs need to be set in the psock before the call. However,
in the current code this is not the case. We end up evaluating the
requirements on the old prog state. If your psock is attached to multiple
maps -- for example a tx map and rx map -- then the second update would pull
in the correct maps. But, the other pattern with a single rx enabled map
the correct receive hooks are not used. The result is the race fixed by the
patch in the fixes tag below may still be seen in this case.

To fix we simply set all psock->progs before doing the call into
sock_map_init(). With this the init() call gets the full list of programs
and chooses the correct proto ops on the first iteration instead of
requiring the second update to pull them in. This fixes the race case when
only a single map is used.

Fixes: c5d2177a72a16 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211119181418.353932-2-john.fastabend@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x86: Fix "no previous prototype" warning

commit f45b2974cc0ae959a4c503a071e38a56bd64372f upstream.

The arch_prepare_bpf_dispatcher function does not have a prototype, and
yields the following warning when W=1 is enabled for the kernel build.

  >> arch/x86/net/bpf_jit_comp.c:2188:5: warning: no previous \
  prototype for 'arch_prepare_bpf_dispatcher' [-Wmissing-prototypes]
        2188 | int arch_prepare_bpf_dispatcher(void *image, s64 *funcs, \
int num_funcs)
             |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~

Remove the warning by adding a function declaration to include/linux/bpf.h.

Fixes: 75ccbef6369e ("bpf: Introduce BPF dispatcher")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211117125708.769168-1-bjorn@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vrf: don't run conntrack on vrf with !dflt qdisc

commit d43b75fbc23f0ac1ef9c14a5a166d3ccb761a451 upstream.

After the below patch, the conntrack attached to skb is set to "notrack" in
the context of vrf device, for locally generated packets.
But this is true only when the default qdisc is set to the vrf device. When
changing the qdisc, notrack is not set anymore.
In fact, there is a shortcut in the vrf driver, when the default qdisc is
set, see commit dcdd43c41e60 ("net: vrf: performance improvements for
IPv4") for more details.

This patch ensures that the behavior is always the same, whatever the qdisc
is.

To demonstrate the difference, a new test is added in conntrack_vrf.sh.

Fixes: 8c9c296adfae ("vrf: run conntrack only in context of lower/physdev for locally generated packets")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: netfilter: add a vrf+conntrack testcase

commit 33b8aad21ac175eba9577a73eb62b0aa141c241c upstream.

Rework the reproducer for the vrf+conntrack regression reported
by Eugene into a selftest and also add a test for ip masquerading
that Lahav fixed recently.

With net or net-next tree, the first test fails and the latter
two pass.

With 09e856d54bda5f28 ("vrf: Reset skb conntrack connection on VRF rcv")
reverted first test passes but the last two fail.

A proper fix needs more work, for time being a revert seems to be
the best choice, snat/masquerade did not work before the fix.

Link: https://lore.kernel.org/netdev/378ca299-4474-7e9a-3d36-2350c8c98995@gmail.com/T/#m95358a31810df7392f541f99d187227bc75c9963
Reported-by: Eugene Crosser <crosser@average.org>
Cc: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done

commit 4cd8371a234d051f9c9557fcbb1f8c523b1c0d10 upstream.

The done() netlink callback nfc_genl_dump_ses_done() should check if
received argument is non-NULL, because its allocation could fail earlier
in dumpit() (nfc_genl_dump_ses()).

Fixes: ac22ac466a65 ("NFC: Add a GET_SE netlink API")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211209081307.57337-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: amd-pmc: Fix s2idle failures on certain AMD laptops

commit 49201b90af818654c5506a0decc18e111eadcb66 upstream.

On some AMD hardware laptops, the system fails communicating with the
PMC when entering s2idle and the machine is battery powered.

Hardware description: HP Pavilion Aero Laptop 13-be0097nr
CPU: AMD Ryzen 7 5800U with Radeon Graphics
GPU: 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices,
Inc. [AMD/ATI] Device [1002:1638] (rev c1)

Detailed description of the problem (and investigation) here:
https://gitlab.freedesktop.org/drm/amd/-/issues/1799

Patch is a single line: reduce the polling delay in half, from 100uSec
to 50uSec when waiting for a change in state from the PMC after a
write command operation.

After changing the delay, I did not see a single failure on this
machine (I have this fix for now more than one week and s2idle worked
every single time on battery power).

Cc: stable@vger.kernel.org
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Fabrizio Bertocci <fabriziobertocci@gmail.com>
Link: https://lore.kernel.org/r/CADtzkx7TdfbwtaVEXUdD6YXPey52E-nZVQNs+Z41DTx7gqMqtw@mail.gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sme: Explicitly map new EFI memmap table as encrypted

commit 1ff2fc02862d52e18fd3daabcfe840ec27e920a8 upstream.

Reserving memory using efi_mem_reserve() calls into the x86
efi_arch_mem_reserve() function. This function will insert a new EFI
memory descriptor into the EFI memory map representing the area of
memory to be reserved and marking it as EFI runtime memory. As part
of adding this new entry, a new EFI memory map is allocated and mapped.
The mapping is where a problem can occur. This new memory map is mapped
using early_memremap() and generally mapped encrypted, unless the new
memory for the mapping happens to come from an area of memory that is
marked as EFI_BOOT_SERVICES_DATA memory. In this case, the new memory will
be mapped unencrypted. However, during replacement of the old memory map,
efi_mem_type() is disabled, so the new memory map will now be long-term
mapped encrypted (in efi.memmap), resulting in the map containing invalid
data and causing the kernel boot to crash.

Since it is known that the area will be mapped encrypted going forward,
explicitly map the new memory map as encrypted using early_memremap_prot().

Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 8f716c9b5feb ("x86/mm: Add support to access boot related data in the clear")
Link: https://lore.kernel.org/all/ebf1eb2940405438a09d51d121ec0d02c8755558.1634752931.git.thomas.lendacky@amd.com/
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ardb: incorporate Kconfig fix by Arnd]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports

commit 04ec4e6250e5f58b525b08f3dca45c7d7427620e upstream.

Martyn Welch reports that his CPU port is unable to link where it has
been necessary to use one of the switch ports with an internal PHY for
the CPU port. The reason behind this is the port control register is
left forcing the link down, preventing traffic flow.

This occurs because during initialisation, phylink expects the link to
be down, and DSA forces the link down by synthesising a call to the
DSA drivers phylink_mac_link_down() method, but we don't touch the
forced-link state when we later reconfigure the port.

Resolve this by also unforcing the link state when we are operating in
PHY mode and the PPU is set to poll the PHY to retrieve link status
information.

Reported-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control")
Cc: <stable@vger.kernel.org> # 5.7: 2b29cb9e3f7f: net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mvFhP-00F8Zb-Ul@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"

commit 2b29cb9e3f7f038c7f50ad2583b47caf5cb1eaf2 upstream.

This commit fixes a misunderstanding in commit 4a3e0aeddf09 ("net: dsa:
mv88e6xxx: don't use PHY_DETECT on internal PHY's").

For Marvell DSA switches with the PHY_DETECT bit (for non-6250 family
devices), controls whether the PPU polls the PHY to retrieve the link,
speed, duplex and pause status to update the port configuration. This
applies for both internal and external PHYs.

For some switches such as 88E6352 and 88E6390X, PHY_DETECT has an
additional function of enabling auto-media mode between the internal
PHY and SERDES blocks depending on which first gains link.

The original intention of commit 5d5b231da7ac (net: dsa: mv88e6xxx: use
PHY_DETECT in mac_link_up/mac_link_down) was to allow this bit to be
used to detect when this propagation is enabled, and allow software to
update the port configuration. This has found to be necessary for some
switches which do not automatically propagate status from the SERDES to
the port, which includes the 88E6390. However, commit 4a3e0aeddf09
("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's") breaks
this assumption.

Maarten Zanders has confirmed that the issue he was addressing was for
an 88E6250 switch, which does not have a PHY_DETECT bit in bit 12, but
instead a link status bit. Therefore, mv88e6xxx_port_ppu_updates() does
not report correctly.

This patch resolves the above issues by reverting Maarten's change and
instead making mv88e6xxx_port_ppu_updates() indicate whether the port
is internal for the 88E6250 family of switches.

  Yes, you're right, I'm targeting the 6250 family. And yes, your
  suggestion would solve my case and is a better implementation for
  the other devices (as far as I can see).

Fixes: 4a3e0aeddf09 ("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/E1muXm7-00EwJB-7n@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: Disable and ignore ELO interrupt

commit f58ac1adc76b5beda43c64ef359056077df4d93a upstream.

With the design of this driver, this condition is often triggered.
However, the counter that this interrupt indicates an overflow is never
read either, so overflowing is harmless.

On my system, when a CAN bus starts flapping up and down, this locks up
the whole system with lots of interrupts and printks.

Specifically, this interrupt indicates the CEL field of ECR has
overflowed. All reads of ECR mask out CEL.

Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com
Cc: stable@vger.kernel.org
Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo()

commit d737de2d7cc3efdacbf17d4e22efc75697bd76d9 upstream.

The same fix that was previously done in m_can_platform in commit
99d173fbe894 ("can: m_can: fix iomap_read_fifo() and iomap_write_fifo()")
is required in m_can_pci as well to make iomap_read_fifo() and
iomap_write_fifo() work for val_count > 1.

Fixes: 812270e5445b ("can: m_can: Batch FIFO writes during CAN transmit")
Fixes: 1aa6772f64b4 ("can: m_can: Batch FIFO reads during CAN receive")
Link: https://lore.kernel.org/all/20211118144011.10921-1-matthias.schiffer@ew.tq-group.com
Cc: stable@vger.kernel.org
Cc: Matt Kline <matt@bitbashing.io>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: pci: fix incorrect reference clock rate

commit 8c03b8bff765ac4146342ef90931bb50e788c758 upstream.

When testing the CAN controller on our Ekhart Lake hardware, we
determined that all communication was running with twice the configured
bitrate. Changing the reference clock rate from 100MHz to 200MHz fixed
this. Intel's support has confirmed to us that 200MHz is indeed the
correct clock rate.

Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
Link: https://lore.kernel.org/all/c9cf3995f45c363e432b3ae8eb1275e54f009fc8.1636967198.git.matthias.schiffer@ew.tq-group.com
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: m_can_read_fifo: fix memory leak in error branch

commit 31cb32a590d62b18f69a9a6d433f4e69c74fdd56 upstream.

In m_can_read_fifo(), if the second call to m_can_fifo_read() fails,
the function jump to the out_fail label and returns without calling
m_can_receive_skb(). This means that the skb previously allocated by
alloc_can_skb() is not freed. In other terms, this is a memory leak.

This patch adds a goto label to destroy the skb if an error occurs.

Issue was found with GCC -fanalyzer, please follow the link below for
details.

Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors")
Link: https://lore.kernel.org/all/20211107050755.70655-1-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Cc: Matt Kline <matt@bitbashing.io>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: pch_can: pch_can_rx_normal: fix use after free

commit 94cddf1e9227a171b27292509d59691819c458db upstream.

After calling netif_receive_skb(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is dereferenced
just after the call netif_receive_skb(skb).

Reordering the lines solves the issue.

Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.")
Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: sja1000: fix use after free in ems_pcmcia_add_card()

commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream.

If the last channel is not available then "dev" is freed. Fortunately,
we can just use "pdev->irq" instead.

Also we should check if at least one channel was set up.

Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Link: https://lore.kernel.org/all/20211124145041.GB13656@kili
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter

commit 36aea60fc892ce73f96d45dc7eb239c7c4c1fa69 upstream.

Check the direction bit in the error frame packet (EPACK) to determine
which net_device_stats {rx,tx}_errors counter to increase.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Link: https://lore.kernel.org/all/20211208152122.250852-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: get CAN clock frequency from device

commit fb12797ab1fef480ad8a32a30984844444eeb00d upstream.

The CAN clock frequency is used when calculating the CAN bittiming
parameters. When wrong clock frequency is used, the device may end up
with wrong bittiming parameters, depending on user requested bittiming
parameters.

To avoid this, get the CAN clock frequency from the device. Various
existing Kvaser Leaf products use different CAN clocks.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddr

commit 60a8b5a1611b4a26de4839ab9c1fc2a9cf3e17c1 upstream.

This buffer is currently allocated in hfi1_init():

if (reinit)
ret = init_after_reset(dd);
else
ret = loadtime_init(dd);
if (ret)
goto done;

/* allocate dummy tail memory for all receive contexts */
dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev,
sizeof(u64),
&dd->rcvhdrtail_dummy_dma,
GFP_KERNEL);

if (!dd->rcvhdrtail_dummy_kvaddr) {
dd_dev_err(dd, "cannot allocate dummy tail memory\n");
ret = -ENOMEM;
goto done;
}

The reinit triggered path will overwrite the old allocation and leak it.

Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation
to hfi1_free_devdata().

Link: https://lore.kernel.org/r/20211129192008.101968.91302.stgit@awfm-01.cornelisnetworks.com
Cc: stable@vger.kernel.org
Fixes: 46b010d3eeb8 ("staging/rdma/hfi1: Workaround to prevent corruption during packet delivery")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix early init panic

commit f6a3cfec3c01f9983e961c3327cef0db129a3c43 upstream.

The following trace can be observed with an init failure such as firmware
load failures:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  PGD 0 P4D 0
  Oops: 0010 [#1] SMP PTI
  CPU: 0 PID: 537 Comm: kworker/0:3 Tainted: G           OE    --------- -  - 4.18.0-240.el8.x86_64 #1
  Workqueue: events work_for_cpu_fn
  RIP: 0010:0x0
  Code: Bad RIP value.
  RSP: 0000:ffffae5f878a3c98 EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff95e48e025c00 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff95e48e025c00
  RBP: ffff95e4bf3660a4 R08: 0000000000000000 R09: ffffffff86d5e100
  R10: ffff95e49e1de600 R11: 0000000000000001 R12: ffff95e4bf366180
  R13: ffff95e48e025c00 R14: ffff95e4bf366028 R15: ffff95e4bf366000
  FS:  0000000000000000(0000) GS:ffff95e4df200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffffffffffd6 CR3: 0000000f86a0a003 CR4: 00000000001606f0
  Call Trace:
   receive_context_interrupt+0x1f/0x40 [hfi1]
   __free_irq+0x201/0x300
   free_irq+0x2e/0x60
   pci_free_irq+0x18/0x30
   msix_free_irq.part.2+0x46/0x80 [hfi1]
   msix_clean_up_interrupts+0x2b/0x70 [hfi1]
   hfi1_init_dd+0x640/0x1a90 [hfi1]
   do_init_one.isra.19+0x34d/0x680 [hfi1]
   local_pci_probe+0x41/0x90
   work_for_cpu_fn+0x16/0x20
   process_one_work+0x1a7/0x360
   worker_thread+0x1cf/0x390
   ? create_worker+0x1a0/0x1a0
   kthread+0x112/0x130
   ? kthread_flush_work_fn+0x10/0x10
   ret_from_fork+0x35/0x40

The free_irq() results in a callback to the registered interrupt handler,
and rcd->do_interrupt is NULL because the receive context data structures
are not fully initialized.

Fix by ensuring that the do_interrupt is always assigned and adding a
guards in the slow path handler to detect and handle a partially
initialized receive context and noop the receive.

Link: https://lore.kernel.org/r/20211129192003.101968.33612.stgit@awfm-01.cornelisnetworks.com
Cc: stable@vger.kernel.org
Fixes: b0ba3c18d6bf ("IB/hfi1: Move normal functions from hfi1_devdata to const array")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Insure use of smp_processor_id() is preempt disabled

commit b6d57e24ce6cc3df8a8845e1b193e88a65d501b1 upstream.

The following BUG has just surfaced with our 5.16 testing:

  BUG: using smp_processor_id() in preemptible [00000000] code: mpicheck/1581081
  caller is sdma_select_user_engine+0x72/0x210 [hfi1]
  CPU: 0 PID: 1581081 Comm: mpicheck Tainted: G S                5.16.0-rc1+ #1
  Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016
  Call Trace:
   <TASK>
   dump_stack_lvl+0x33/0x42
   check_preemption_disabled+0xbf/0xe0
   sdma_select_user_engine+0x72/0x210 [hfi1]
   ? _raw_spin_unlock_irqrestore+0x1f/0x31
   ? hfi1_mmu_rb_insert+0x6b/0x200 [hfi1]
   hfi1_user_sdma_process_request+0xa02/0x1120 [hfi1]
   ? hfi1_write_iter+0xb8/0x200 [hfi1]
   hfi1_write_iter+0xb8/0x200 [hfi1]
   do_iter_readv_writev+0x163/0x1c0
   do_iter_write+0x80/0x1c0
   vfs_writev+0x88/0x1a0
   ? recalibrate_cpu_khz+0x10/0x10
   ? ktime_get+0x3e/0xa0
   ? __fget_files+0x66/0xa0
   do_writev+0x65/0x100
   do_syscall_64+0x3a/0x80

Fix this long standing bug by moving the smp_processor_id() to after the
rcu_read_lock().

The rcu_read_lock() implicitly disables preemption.

Link: https://lore.kernel.org/r/20211129191958.101968.87329.stgit@awfm-01.cornelisnetworks.com
Cc: stable@vger.kernel.org
Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nft_set_pipapo: Fix bucket load in AVX2 lookup routine for six 8-bit groups

commit b7e945e228d7df1b1473ef6fd2cdec67433065fb upstream.

The sixth byte of packet data has to be looked up in the sixth group,
not in the seventh one, even if we load the bucket data into ymm6
(and not ymm5, for convenience of tracking stalls).

Without this fix, matching on a MAC address as first field of a set,
if 8-bit groups are selected (due to a small set size) would fail,
that is, the given MAC address would never match.

Reported-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-By: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86/intel: hid: add quirk to support Surface Go 3

commit 7d0c009043f6a970f62dbf5aecda9f8c3ccafcff upstream.

Similar to other systems Surface Go 3 requires a DMI quirk to enable
5 button array for power and volume buttons.

Buglink: https://github.com/linux-surface/linux-surface/issues/595
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Link: https://lore.kernel.org/r/20211203212810.2666508-1-alex.hung@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: Ignore battery for Elan touchscreen on Asus UX550VE

commit 14902f8961dca9c66bf190f7b1583767c97a4197 upstream.

Battery status is reported for the Asus UX550VE touchscreen even though
it does not have a battery. Prevent it from always reporting the
battery as low.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: sony: fix error path in probe

commit 7998193bccc1c6e1537c5f3880fd0d5b949ec9d1 upstream.

When the setup of the GHL fails, we are not calling hid_hw_stop().
This leads to the hidraw node not being released, meaning a crash
whenever somebody attempts to open the file.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-2-benjamin.tissoires@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: spi: Add device-tree SPI IDs

commit 5f719948b5d43eb39356e94e8d0b462568915381 upstream.

Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT
compatible") added a test to check that every SPI driver has a
spi_device_id for each DT compatiable string defined by the driver
and warns if the spi_device_id is missing. The spi_device_id is
missing for the MMC SPI driver and the following warning is now seen.

WARNING KERN SPI driver mmc_spi has no spi_device_id for mmc-spi-slot

Fix this by adding the necessary spi_device_id.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211115113813.238044-1-jonathanh@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: dataflash: Add device-tree SPI IDs

commit 27a030e8729255b2068f35c1cd609b532b263311 upstream.

Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT
compatible") added a test to check that every SPI driver has a
spi_device_id for each DT compatiable string defined by the driver
and warns if the spi_device_id is missing. The spi_device_ids are
missing for the dataflash driver and the following warnings are now
seen.

WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,at45
WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,dataflash

Fix this by adding the necessary spi_device_ids.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211130112443.107730-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: check for valid USB device for many HID drivers

commit 93020953d0fa7035fd036ad87a47ae2b7aa4ae33 upstream.

Many HID drivers assume that the HID device assigned to them is a USB
device as that was the only way HID devices used to be able to be
created in Linux. However, with the additional ways that HID devices
can be created for many different bus types, that is no longer true, so
properly check that we have a USB device associated with the HID device
before allowing a driver that makes this assumption to claim it.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Michael Zaidman <michael.zaidman@gmail.com>
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
[bentiss: amended for thrustmater.c hunk to apply]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: fix problems when device is not a valid USB device

commit 720ac467204a70308bd687927ed475afb904e11b upstream.

The wacom driver accepts devices of more than just USB types, but some
code paths can cause problems if the device being controlled is not a
USB device due to a lack of checking. Add the needed checks to ensure
that the USB device accesses are only happening on a "real" USB device,
and not one on some other bus.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: bigbenff: prevent null pointer dereference

commit 918aa1ef104d286d16b9e7ef139a463ac7a296f0 upstream.

When emulating the device through uhid, there is a chance we don't have
output reports and so report_field is null.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-3-benjamin.tissoires@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: add USB_HID dependancy on some USB HID drivers

commit f237d9028f844a86955fc9da59d7ac4a5c55d7d5 upstream.

Some HID drivers are only for USB drivers, yet did not depend on
CONFIG_USB_HID. This was hidden by the fact that the USB functions were
stubbed out in the past, but now that drivers are checking for USB
devices properly, build errors can occur with some random
configurations.

Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211202114819.2511954-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: add USB_HID dependancy to hid-chicony

commit d080811f27936f712f619f847389f403ac873b8f upstream.

The chicony HID driver only controls USB devices, yet did not have a
dependancy on USB_HID. This causes build errors on some configurations
like sparc when building due to new changes to the chicony driver.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: add USB_HID dependancy to hid-prodikeys

commit 30cb3c2ad24b66fb7639a6d1f4390c74d6e68f94 upstream.

The prodikeys HID driver only controls USB devices, yet did not have a
dependancy on USB_HID. This causes build errors on some configurations
like nios2 when building due to new changes to the prodikeys driver.

Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: add hid_is_usb() function to make it simpler for USB detection

commit f83baa0cb6cfc92ebaf7f9d3a99d7e34f2e77a8a upstream.

A number of HID drivers already call hid_is_using_ll_driver() but only
for the detection of if this is a USB device or not. Make this more
obvious by creating hid_is_usb() and calling the function that way.

Also converts the existing hid_is_using_ll_driver() functions to use the
new call.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: intel-ish-hid: ipc: only enable IRQ wakeup when requested

commit 086e81f6b90e41a07a1a885bb11e93daa6915747 upstream.

Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on
lid close.

These wakeups are generated by interrupts from the ISH on changes to the
lid status.

By disabling the wake IRQ from the ISH we inhibit these spurious
wakeups while keeping the resume from LID open through the ACPI
interrupt.

Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6
is also affected.

Fixes: ae02e5d40d5f ("HID: intel-ish-hid: ipc layer")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130060117.3026-1-linux@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: google: add eel USB id

commit caff009098e6cf59fd6ac21c3a3befcc854978b4 upstream.

Add one additional hammer-like device.

Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: quirks: Add quirk for the Microsoft Surface 3 type-cover

commit 9003fbe0f3674b972f56fa7e6bf3ac9dbfc4d0ec upstream.

Add a HID_QUIRK_NO_INIT_REPORTS quirk for the
Microsoft Surface 3 (non pro) type-cover.

Trying to init the reports seems to confuse the type-cover and
causes 2 issues:

1. Despite hid-multitouch sending the command to switch the
touchpad to multitouch mode, it keeps sending events on the
mouse emulation interface.

2. The touchpad completely stops sending events after a reboot.

Adding the HID_QUIRK_NO_INIT_REPORTS quirk fixes both issues.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: uvc: fix multiple opens

commit 72ee48ee8925446eaeda8e4ef3f2eb16b4a93d2a upstream.

Currently, the UVC function is activated when open on the corresponding
v4l2 device is called.  On another open the activation of the function
fails since the deactivation counter in `usb_function_activate` equals
0. However the error is not returned to userspace since the open of the
v4l2 device is successful.

On a close the function is deactivated (since deactivation counter still
equals 0) and the video is disabled in `uvc_v4l2_release`, although the
UVC application potentially is streaming.

Move activation of UVC function to subscription on UVC_EVENT_SETUP
because there we can guarantee for a userspace application utilizing
UVC.  Block subscription on UVC_EVENT_SETUP while another application
already is subscribed to it, indicated by `bool func_connected` in
`struct uvc_device`.  Extend the `struct uvc_file_handle` with member
`bool is_uvc_app_handle` to tag it as the handle used by the userspace
UVC application.

With this a process is able to check capabilities of the v4l2 device
without deactivating the function for the actual UVC application.

Reviewed-By: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@wolfvision.net>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20211003201355.24081-1-m.grzeschik@pengutronix.de
Cc: Dan Vacura <W36195@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.7

Link: https://lore.kernel.org/r/20211206145610.172203682@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: msghandler: Make symbol 'remove_work_wq' static

commit 5a3ba99b62d8486de0316334e72ac620d4b94fdd upstream.

The sparse tool complains as follows:

drivers/char/ipmi/ipmi_msghandler.c:194:25: warning:
symbol 'remove_work_wq' was not declared. Should it be static?

This symbol is not used outside of ipmi_msghandler.c, so
marks it static.

Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20211123083618.2366808-1-weiyongjun1@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: liteuart: fix minor-number leak on probe errors

commit dd5e90b16cca8a697cbe17b72e2a5f49291cabb2 upstream.

Make sure to release the allocated minor number before returning on
probe errors.

Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver")
Cc: stable@vger.kernel.org # 5.11
Cc: Filip Kokosinski <fkokosinski@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211117100512.5058-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: liteuart: fix use-after-free and memleak on unbind

commit 05f929b395dec8957b636ff14e66b277ed022ed9 upstream.

Deregister the port when unbinding the driver to prevent it from being
used after releasing the driver data and leaking memory allocated by
serial core.

Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver")
Cc: stable@vger.kernel.org # 5.11
Cc: Filip Kokosinski <fkokosinski@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211117100512.5058-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: liteuart: Fix NULL pointer dereference in ->remove()

commit 0f55f89d98c8b3e12b4f55f71c127a173e29557c upstream.

drvdata has to be set in _probe() - otherwise platform_get_drvdata()
causes null pointer dereference BUG in _remove().

Fixes: 1da81e5562fa ("drivers/tty/serial: add LiteUART driver")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilia Sergachev <silia@ethz.ch>
Link: https://lore.kernel.org/r/20211115224944.23f8c12b@dtkw
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: Fix RTS modem control while in rs485 mode

commit f85e04503f369b3f2be28c83fc48b74e19936ebc upstream.

Commit f45709df7731 ("serial: 8250: Don't touch RTS modem control while
in rs485 mode") sought to prevent user space from interfering with rs485
communication by ignoring a TIOCMSET ioctl() which changes RTS polarity.

It did so in serial8250_do_set_mctrl(), which turns out to be too deep
in the call stack:  When a uart_port is opened, RTS polarity is set by
the rs485-aware function uart_port_dtr_rts().  It calls down to
serial8250_do_set_mctrl() and that particular RTS polarity change should
*not* be ignored.

The user-visible result is that on 8250_omap ports which use rs485 with
inverse polarity (RTS bit in MCR register is 1 to receive, 0 to send),
a newly opened port initially sets up RTS for sending instead of
receiving.  That's because omap_8250_startup() sets the cached value
up->mcr to 0 and omap_8250_restore_regs() subsequently writes it to the
MCR register.  Due to the commit, serial8250_do_set_mctrl() preserves
that incorrect register value:

do_sys_openat2
  do_filp_open
    path_openat
      vfs_open
        do_dentry_open
  chrdev_open
    tty_open
      uart_open
        tty_port_open
  uart_port_activate
    uart_startup
      uart_port_startup
        serial8250_startup
  omap_8250_startup # up->mcr = 0
uart_change_speed
  serial8250_set_termios
    omap_8250_set_termios
      omap_8250_restore_regs
        serial8250_out_MCR # up->mcr written
  tty_port_block_til_ready
    uart_dtr_rts
      uart_port_dtr_rts
        serial8250_set_mctrl
  omap8250_set_mctrl
    serial8250_do_set_mctrl # mcr[1] = 1 ignored

Fix by intercepting RTS changes from user space in uart_tiocmset()
instead.

Link: https://lore.kernel.org/linux-serial/20211027111644.1996921-1-baocheng.su@siemens.com/
Fixes: f45709df7731 ("serial: 8250: Don't touch RTS modem control while in rs485 mode")
Cc: Chao Zeng <chao.zeng@siemens.com>
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Su Bao Cheng <baocheng.su@siemens.com>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/21170e622a1aaf842a50b32146008b5374b3dd1d.1637596432.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_pci: rewrite pericom_do_set_divisor()

commit bb1201d4b38ec67bd9a871cf86b0cc10f28b15b5 upstream.

Have pericom_do_set_divisor() use the uartclk instead of a hard coded
value to work with different speed crystals. Tested with 14.7456 and 24
MHz crystals.

Have pericom_do_set_divisor() always calculate the divisor rather than
call serial8250_do_set_divisor() for rates below baud_base.

Do not write registers or call serial8250_do_set_divisor() if valid
divisors could not be found.

Fixes: 6bf4e42f1d19 ("serial: 8250: Add support for higher baud rates to Pericom chips")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122120604.3909-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array

commit c525c5d2437f93520388920baac6d9340c65d239 upstream.

Fix error in table for PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S that caused it
and PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 to be missing their fourth port.

Fixes: 78d3820b9bd3 ("serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122120604.3909-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: core: fix transmit-buffer reset and memleak

commit 00de977f9e0aa9760d9a79d1e41ff780f74e3424 upstream.

Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use
tty_port_close") converted serial core to use tty_port_close() but
failed to notice that the transmit buffer still needs to be freed on
final close.

Not freeing the transmit buffer means that the buffer is no longer
cleared on next open so that any ioctl() waiting for the buffer to drain
might wait indefinitely (e.g. on termios changes) or that stale data can
end up being transmitted in case tx is restarted.

Furthermore, the buffer of any port that has been opened would leak on
driver unbind.

Note that the port lock is held when clearing the buffer pointer due to
the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race
between uart_put_char() and uart_shutdown()").

Also note that the tty-port shutdown() callback is not called for
console ports so it is not strictly necessary to free the buffer page
after releasing the lock (cf. d72402145ace ("tty/serial: do not free
trasnmit buffer page under port lock")).

Link: https://lore.kernel.org/r/319321886d97c456203d5c6a576a5480d07c3478.1635781688.git.baruch@tkos.co.il
Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close")
Cc: stable@vger.kernel.org # 4.9
Cc: Rob Herring <robh@kernel.org>
Reported-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211108085431.12637-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30

commit b40de7469ef135161c80af0e8c462298cc5dac00 upstream.

The current implementation uses 0 as lower limit for the baud rate
tolerance for tegra20 and tegra30 chips which causes isses on UART
initialization as soon as baud rate clock is lower than required even
when within the standard UART tolerance of +/- 4%.

This fix aligns the implementation with the initial commit description
of +/- 4% tolerance for tegra chips other than tegra186 and
tegra194.

Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Patrik John <patrik.john@u-blox.com>
Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: pl011: Add ACPI SBSA UART match id

commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream.

The document 'ACPI for Arm Components 1.0' defines the following
_HID mappings:
-'Prime cell UART (PL011)': ARMH0011
-'SBSA UART': ARMHB000

Use the sbsa-uart driver when a device is described with
the 'ARMHB000' _HID.

Note:
PL011 devices currently use the sbsa-uart driver instead of the
uart-pl011 driver. Indeed, PL011 devices are not bound to a clock
in ACPI. It is not possible to change their baudrate.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: msm_serial: Deactivate RX DMA for polling support

commit 7492ffc90fa126afb67d4392d56cb4134780194a upstream.

The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of
setup, it is often sharing a serial device with the normal system console.
This is usually no problem because the polling helpers can consume input
values directly (when in kgdb context) and the normal Linux handlers can
only consume new input values after kgdb switched back.

This is not true anymore when RX DMA is enabled for UARTDM controllers.
Single input values can no longer be received correctly. Instead following
seems to happen:

* on 1. input, some old input is read (continuously)
* on 2. input, two old inputs are read (continuously)
* on 3. input, three old input values are read (continuously)
* on 4. input, 4 previous inputs are received

This repeats then for each group of 4 input values.

This behavior changes slightly depending on what state the controller was
when the first input was received. But this makes working with kgdb
basically impossible because control messages are always corrupted when
kgdboc tries to parse them.

RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid
these kind of problems. No such problem was noticed for TX DMA.

Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/64/mm: Map all kernel memory into trampoline_pgd

commit 51523ed1c26758de1af7e58730a656875f72f783 upstream.

The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff
range of kernel memory (with 4-level paging). This range contains the
kernel's text+data+bss mappings and the module mapping space but not the
direct mapping and the vmalloc area.

This is enough to get the application processors out of real-mode, but
for code that switches back to real-mode the trampoline_pgd is missing
important parts of the address space. For example, consider this code
from arch/x86/kernel/reboot.c, function machine_real_restart() for a
64-bit kernel:

  #ifdef CONFIG_X86_32
   load_cr3(initial_page_table);
  #else
   write_cr3(real_mode_header->trampoline_pgd);

   /* Exiting long mode will fail if CR4.PCIDE is set. */
   if (boot_cpu_has(X86_FEATURE_PCID))
   cr4_clear_bits(X86_CR4_PCIDE);
  #endif

   /* Jump to the identity-mapped low memory code */
  #ifdef CONFIG_X86_32
   asm volatile("jmpl *%0" : :
        "rm" (real_mode_header->machine_real_restart_asm),
        "a" (type));
  #else
   asm volatile("ljmpl *%0" : :
        "m" (real_mode_header->machine_real_restart_asm),
        "D" (type));
  #endif

The code switches to the trampoline_pgd, which unmaps the direct mapping
and also the kernel stack. The call to cr4_clear_bits() will find no
stack and crash the machine. The real_mode_header pointer below points
into the direct mapping, and dereferencing it also causes a crash.

The reason this does not crash always is only that kernel mappings are
global and the CR3 switch does not flush those mappings. But if theses
mappings are not in the TLB already, the above code will crash before it
can jump to the real-mode stub.

Extend the trampoline_pgd to contain all kernel mappings to prevent
these crashes and to make code which runs on this page-table more
robust.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211202153226.22946-5-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/tsc: Disable clocksource watchdog for TSC on qualified platorms

commit b50db7095fe002fa3e16605546cba66bf1b68a3e upstream.

There are cases that the TSC clocksource is wrongly judged as unstable by
the clocksource watchdog mechanism which tries to validate the TSC against
HPET, PM_TIMER or jiffies. While there is hardly a general reliable way to
check the validity of a watchdog, Thomas Gleixner proposed [1]:

"I'm inclined to lift that requirement when the CPU has:

    1) X86_FEATURE_CONSTANT_TSC
    2) X86_FEATURE_NONSTOP_TSC
    3) X86_FEATURE_NONSTOP_TSC_S3
    4) X86_FEATURE_TSC_ADJUST
    5) At max. 4 sockets

After two decades of horrors we're finally at a point where TSC seems
to be halfway reliable and less abused by BIOS tinkerers. TSC_ADJUST
was really key as we can now detect even small modifications reliably
and the important point is that we can cure them as well (not pretty
but better than all other options)."

As feature #3 X86_FEATURE_NONSTOP_TSC_S3 only exists on several generations
of Atom processorz, and is always coupled with X86_FEATURE_CONSTANT_TSC
and X86_FEATURE_NONSTOP_TSC, skip checking it, and also be more defensive
to use maximal 2 sockets.

The check is done inside tsc_init() before registering 'tsc-early' and
'tsc' clocksources, as there were cases that both of them had been
wrongly judged as unreliable.

For more background of tsc/watchdog, there is a good summary in [2]

[tglx} Update vs. jiffies:

  On systems where the only remaining clocksource aside of TSC is jiffies
  there is no way to make this work because that creates a circular
  dependency. Jiffies accuracy depends on not missing a periodic timer
  interrupt, which is not guaranteed. That could be detected by TSC, but as
  TSC is not trusted this cannot be compensated. The consequence is a
  circulus vitiosus which results in shutting down TSC and falling back to
  the jiffies clocksource which is even more unreliable.

[1]. https://lore.kernel.org/lkml/87eekfk8bd.fsf@nanos.tec.linutronix.de/
[2]. https://lore.kernel.org/lkml/87a6pimt1f.ffs@nanos.tec.linutronix.de/

[ tglx: Refine comment and amend changelog ]

Fixes: 6e3cd95234dc ("x86/hpet: Use another crystalball to evaluate HPET usability")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211117023751.24190-2-feng.tang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/tsc: Add a timer to make sure TSC_adjust is always checked

commit c7719e79347803b8e3b6b50da8c6db410a3012b5 upstream.

The TSC_ADJUST register is checked every time a CPU enters idle state, but
Thomas Gleixner mentioned there is still a caveat that a system won't enter
idle [1], either because it's too busy or configured purposely to not enter
idle.

Setup a periodic timer (every 10 minutes) to make sure the check is
happening on a regular base.

[1] https://lore.kernel.org/lkml/875z286xtk.fsf@nanos.tec.linutronix.de/

Fixes: 6e3cd95234dc ("x86/hpet: Use another crystalball to evaluate HPET usability")
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211117023751.24190-1-feng.tang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()

commit 37307f7020ab38dde0892a578249bf63d00bca64 upstream.

In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring
and there is a dereference of it in cdnsp_endpoint_init(), which could
lead to a NULL pointer dereference on failure of cdnsp_ring_alloc().

Fix this bug by adding a check of pep->ring.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@vger.kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests

commit 387c2b6ba197c6df28e75359f7d892f7c8dec204 upstream.

This issue was found at android12 MTP.
1. MTP submit many out urb request.
2. Cancel left requests (>20) when enough data get from host
3. Send ACK by IN endpoint.
4. MTP submit new out urb request.
5. 4's urb never complete.

TRACE LOG:

MtpServer-2157    [000] d..3  1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0
MtpServer-2157    [000] d..3  1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0
MtpServer-2157    [000] d..3  1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0
MtpServer-2157    [000] d..3  1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0
....
MtpServer-2157    [000] d..1  1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157    [000] d..2  1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157    [000] d..2  1293.630445: cdns3_wa1: WA1: ep1out set guard
MtpServer-2157    [000] d..2  1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit
MtpServer-2157    [000] d..2  1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
MtpServer-2157    [000] d..2  1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414
....
irq/241-5b13000-2154    [000] d..1  1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0
irq/241-5b13000-2154    [000] d..1  1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0
irq/241-5b13000-2154    [000] d..1  1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184

Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong.

The TRB link is below when irq happen.

DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START  DMA(EP_TRADDR).

Original code check LINK TRB, but DEQ just move one step.

LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START  DMA(EP_TRADDR).

This patch skip all LINK TRB and sync DEQ to trb's start.

LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START  DMA(EP_TRADDR).

Acked-by: Peter Chen <peter.chen@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect

commit fbcd13df1e78eb2ba83a3c160eefe2d6f574beaf upstream.

Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."

This change makes TCPM to wait in SNK_DEBOUNCED state until
CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
This causes TCPM to loop continuously when connected to a
faulty power source that does not present vbus. Waiting in
SNK_DEBOUNCED also ensures that TCPM is adherant to
"4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.

[ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6169.931296] disable vbus discharge ret:0
[ 6169.931301] Setting usb_comm capable false
[ 6169.932783] Setting voltage/current limit 0 mV 0 mA
[ 6169.932802] polarity 0
[ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
[ 6169.936689] cc:=0
[ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 6170.036896] Start toggling
[ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6170.693304] disable vbus discharge ret:0
[ 6170.693308] Setting usb_comm capable false
[ 6170.695193] Setting voltage/current limit 0 mV 0 mA
[ 6170.695210] polarity 0
[ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
[ 6170.701896] cc:=0
[ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]

Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub

commit d2a004037c3c6afd36d40c384d2905f47cd51c57 upstream.

This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71

Disable LPM to resolve the issue.

Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix commad ring abort, write all 64 bits to CRCR register.

commit 09f736aa95476631227d2dc0e6b9aeee1ad7ed58 upstream.

Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.

The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.

Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.

The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.

Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vgacon: Propagate console boot parameters before calling `vc_resize'

commit 3dfac26e2ef29ff2abc2a75aa4cd48fce25a2c4b upstream.

Fix a division by zero in `vgacon_resize' with a backtrace like:

vgacon_resize
vc_do_resize
vgacon_init
do_bind_con_driver
do_unbind_con_driver
fbcon_fb_unbind
do_unregister_framebuffer
do_register_framebuffer
register_framebuffer
__drm_fb_helper_initial_config_and_unlock
drm_helper_hpd_irq_event
dw_hdmi_irq
irq_thread
kthread

caused by `c->vc_cell_height' not having been initialized.  This has
only started to trigger with commit 860dafa90259 ("vt: Fix character
height handling with VT_RESIZEX"), however the ultimate offender is
commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow
retaking of the console").

Said commit has added a call to `vc_resize' whenever `vgacon_init' is
called with the `init' argument set to 0, which did not happen before.
And the call is made before a key vgacon boot parameter retrieved in
`vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to
use to the console structure being worked on.  Previously the parameter
was `c->vc_font.height' and now it is `c->vc_cell_height'.

In this particular scenario the registration of fbcon has failed and vt
resorts to vgacon.  Now fbcon does have initialized `c->vc_font.height'
somehow, unlike `c->vc_cell_height', which is why this code did not
crash before, but either way the boot parameters should have been copied
to the console structure ahead of the call to `vc_resize' rather than
afterwards, so that first the call has a chance to use them and second
they do not change the console structure to something possibly different
from what was used by `vc_resize'.

Move the propagation of the vgacon boot parameters ahead of the call to
`vc_resize' then.  Adjust the comment accordingly.

Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console")
Cc: stable@vger.kernel.org # v2.6.18+
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Mark cr16 CPU clocksource unstable on all SMP machines

commit afdb4a5b1d340e4afffc65daa21cc71890d7d589 upstream.

In commit c8c3735997a3 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour. On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.

This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.

Fixes: c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix "make install" on newer debian releases

commit 0f9fee4cdebfbe695c297e5b603a275e2557c1cc upstream.

On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix KBUILD_IMAGE for self-extracting kernel

commit 1d7c29b77725d05faff6754d2f5e7c147aedcf93 upstream.

Default KBUILD_IMAGE to $(boot)/bzImage if a self-extracting
(CONFIG_PARISC_SELF_EXTRACT=y) kernel is to be built.
This fixes the bindeb-pkg make target.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>