Benedict Wong [Wed, 10 May 2023 01:30:22 +0000 (01:30 +0000)]
xfrm: Ensure policies always checked on XFRM-I input path
[ Upstream commit
a287f5b0cfc6804c5b12a4be13c7c9fe27869e90 ]
This change adds methods in the XFRM-I input path that ensures that
policies are checked prior to processing of the subsequent decapsulated
packet, after which the relevant policies may no longer be resolvable
(due to changing src/dst/proto/etc).
Notably, raw ESP/AH packets did not perform policy checks inherently,
whereas all other encapsulated packets (UDP, TCP encapsulated) do policy
checks after calling xfrm_input handling in the respective encapsulation
layer.
Fixes:
b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Test: Verified with additional Android Kernel Unit tests
Test: Verified against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eyal Birger [Sat, 3 Dec 2022 08:46:56 +0000 (10:46 +0200)]
xfrm: interface: rename xfrm_interface.c to xfrm_interface_core.c
[ Upstream commit
ee9a113ab63468137802898bcd2c598998c96938 ]
This change allows adding additional files to the xfrm_interface module.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20221203084659.1837829-2-eyal.birger@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of:
a287f5b0cfc6 ("xfrm: Ensure policies always checked on XFRM-I input path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benedict Wong [Wed, 10 May 2023 01:30:21 +0000 (01:30 +0000)]
xfrm: Treat already-verified secpath entries as optional
[ Upstream commit
1f8b6df6a997a430b0c48b504638154b520781ad ]
This change allows inbound traffic through nested IPsec tunnels to
successfully match policies and templates, while retaining the secpath
stack trace as necessary for netfilter policies.
Specifically, this patch marks secpath entries that have already matched
against a relevant policy as having been verified, allowing it to be
treated as optional and skipped after a tunnel decapsulation (during
which the src/dst/proto/etc may have changed, and the correct policy
chain no long be resolvable).
This approach is taken as opposed to the iteration in
b0355dbbf13c,
where the secpath was cleared, since that breaks subsequent validations
that rely on the existence of the secpath entries (netfilter policies, or
transport-in-tunnel mode, where policies remain resolvable).
Fixes:
b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Test: Tested against Android Kernel Unit Tests
Test: Tested against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chen Aotian [Sun, 9 Apr 2023 02:20:48 +0000 (10:20 +0800)]
ieee802154: hwsim: Fix possible memory leaks
[ Upstream commit
a61675294735570daca3779bd1dbb3715f7232bd ]
After replacing e->info, it is necessary to free the old einfo.
Fixes:
f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Chen Aotian <chenaotian2@163.com>
Link: https://lore.kernel.org/r/20230409022048.61223-1-chenaotian2@163.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Sat, 17 Jun 2023 20:36:12 +0000 (23:36 +0300)]
mmc: meson-gx: fix deferred probing
[ Upstream commit
b8ada54fa1b83f3b6480d4cced71354301750153 ]
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit
ce753ad1549c ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes:
cbcaac6d7dd2 ("mmc: meson-gx-mmc: Fix platform_get_irq's error checking")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230617203622.6812-3-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roberto Sassu [Wed, 7 Jun 2023 13:24:27 +0000 (15:24 +0200)]
memfd: check for non-NULL file_seals in memfd_create() syscall
[ Upstream commit
935d44acf621aa0688fef8312dec3e5940f38f4e ]
Ensure that file_seals is non-NULL before using it in the memfd_create()
syscall. One situation in which memfd_file_seals_ptr() could return a
NULL pointer when CONFIG_SHMEM=n, oopsing the kernel.
Link: https://lkml.kernel.org/r/20230607132427.2867435-1-roberto.sassu@huaweicloud.com
Fixes:
47b9012ecdc7 ("shmem: add sealing support to hugetlb-backed memfd")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lee Jones [Wed, 14 Jun 2023 16:38:54 +0000 (17:38 +0100)]
x86/mm: Avoid using set_pgd() outside of real PGD pages
commit
d082d48737c75d2b3cc1f972b8c8674c25131534 upstream.
KPTI keeps around two PGDs: one for userspace and another for the
kernel. Among other things, set_pgd() contains infrastructure to
ensure that updates to the kernel PGD are reflected in the user PGD
as well.
One side-effect of this is that set_pgd() expects to be passed whole
pages. Unfortunately, init_trampoline_kaslr() passes in a single entry:
'trampoline_pgd_entry'.
When KPTI is on, set_pgd() will update 'trampoline_pgd_entry' (an
8-Byte globally stored [.bss] variable) and will then proceed to
replicate that value into the non-existent neighboring user page
(located +4k away), leading to the corruption of other global [.bss]
stored variables.
Fix it by directly assigning 'trampoline_pgd_entry' and avoiding
set_pgd().
[ dhansen: tweak subject and changelog ]
Fixes:
0925dda5962e ("x86/mm/KASLR: Use only one PUD entry for real mode trampoline")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20230614163859.924309-1-lee@kernel.org/g
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryusuke Konishi [Mon, 12 Jun 2023 02:14:56 +0000 (11:14 +0900)]
nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
commit
782e53d0c14420858dbf0f8f797973c150d3b6d7 upstream.
In a syzbot stress test that deliberately causes file system errors on
nilfs2 with a corrupted disk image, it has been reported that
nilfs_clear_dirty_page() called from nilfs_clear_dirty_pages() can cause a
general protection fault.
In nilfs_clear_dirty_pages(), when looking up dirty pages from the page
cache and calling nilfs_clear_dirty_page() for each dirty page/folio
retrieved, the back reference from the argument page to "mapping" may have
been changed to NULL (and possibly others). It is necessary to check this
after locking the page/folio.
So, fix this issue by not calling nilfs_clear_dirty_page() on a page/folio
after locking it in nilfs_clear_dirty_pages() if the back reference
"mapping" from the page/folio is different from the "mapping" that held
the page/folio just before.
Link: https://lkml.kernel.org/r/20230612021456.3682-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+53369d11851d8f26735c@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/
000000000000da4f6b05eb9bf593@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sun, 18 Jun 2023 01:50:24 +0000 (19:50 -0600)]
io_uring/poll: serialize poll linked timer start with poll removal
Commit
ef7dfac51d8ed961b742218f526bd589f3900a59 upstream.
We selectively grab the ctx->uring_lock for poll update/removal, but
we really should grab it from the start to fully synchronize with
linked timeouts. Normally this is indeed the case, but if requests
are forced async by the application, we don't fully cover removal
and timer disarm within the uring_lock.
Make this simpler by having consistent locking state for poll removal.
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Querijn Voet <querijnqyn@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Powers-Holmes [Thu, 1 Jun 2023 13:25:16 +0000 (15:25 +0200)]
arm64: dts: rockchip: Fix rk356x PCIe register and range mappings
commit
568a67e742dfa90b19a23305317164c5c350b71e upstream.
The register and range mappings for the PCIe controller in Rockchip's
RK356x SoCs are incorrect. Replace them with corrected values from the
vendor BSP sources, updated to match current DT schema.
These values are also used in u-boot.
Fixes:
66b51ea7d70f ("arm64: dts: rockchip: Add rk3568 PCIe2x1 controller")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20230601132516.153934-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russ Weight [Tue, 20 Jun 2023 20:28:24 +0000 (13:28 -0700)]
regmap: spi-avmm: Fix regmap_bus max_raw_write
[ Upstream commit
c8e796895e2310b6130e7577248da1d771431a77 ]
The max_raw_write member of the regmap_spi_avmm_bus structure is defined
as:
.max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
SPI_AVMM_VAL_SIZE == 4 and MAX_WRITE_CNT == 1 so this results in a
maximum write transfer size of 4 bytes which provides only enough space to
transfer the address of the target register. It provides no space for the
value to be transferred. This bug became an issue (divide-by-zero in
_regmap_raw_write()) after the following was accepted into mainline:
commit
3981514180c9 ("regmap: Account for register length when chunking")
Change max_raw_write to include space (4 additional bytes) for both the
register address and value:
.max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
Fixes:
7f9fb67358a2 ("regmap: add Intel SPI Slave to AVMM Bus Bridge support")
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230620202824.380313-1-russell.h.weight@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Teresa Remmet [Wed, 14 Jun 2023 12:52:40 +0000 (14:52 +0200)]
regulator: pca9450: Fix LDO3OUT and LDO4OUT MASK
[ Upstream commit
7257d930aadcd62d1c7971ab14f3b1126356abdc ]
L3_OUT and L4_OUT Bit fields range from Bit 0:4 and thus the
mask should be 0x1F instead of 0x0F.
Fixes:
0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20230614125240.3946519-1-t.remmet@phytec.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neil Armstrong [Thu, 15 Jun 2023 12:51:45 +0000 (14:51 +0200)]
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
[ Upstream commit
9d7054fb3ac2e8d252aae1268f20623f244e644f ]
Now spi_geni_grab_gpi_chan() errors are correctly reported, the
-EPROBE_DEFER error should be returned from probe in case the
GPI dma driver is built as module and/or not probed yet.
Fixes:
b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma")
Fixes:
6532582c353f ("spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230615-topic-sm8550-upstream-fix-spi-geni-qcom-probe-v2-1-670c3d9e8c9c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mukesh Sisodiya [Mon, 19 Jun 2023 15:02:34 +0000 (17:02 +0200)]
wifi: iwlwifi: pcie: Handle SO-F device for PCI id 0x7AF0
commit
4e9f0ec38852c18faa9689322e758575af33e5d4 upstream.
Add support for AX1690i and AX1690s devices with
PCIE id 0x7AF0.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230619150233.461290-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krister Johansen [Tue, 13 Jun 2023 00:44:40 +0000 (17:44 -0700)]
bpf: ensure main program has an extable
commit
0108a4e9f3584a7a2c026d1601b0682ff7335d95 upstream.
When subprograms are in use, the main program is not jit'd after the
subprograms because jit_subprogs sets a value for prog->bpf_func upon
success. Subsequent calls to the JIT are bypassed when this value is
non-NULL. This leads to a situation where the main program and its
func[0] counterpart are both in the bpf kallsyms tree, but only func[0]
has an extable. Extables are only created during JIT. Now there are
two nearly identical program ksym entries in the tree, but only one has
an extable. Depending upon how the entries are placed, there's a chance
that a fault will call search_extable on the aux with the NULL entry.
Since jit_subprogs already copies state from func[0] to the main
program, include the extable pointer in this state duplication.
Additionally, ensure that the copy of the main program in func[0] is not
added to the bpf_prog_kallsyms table. Instead, let the main program get
added later in bpf_prog_load(). This ensures there is only a single
copy of the main program in the kallsyms table, and that its tag matches
the tag observed by tooling like bpftool.
Cc: stable@vger.kernel.org
Fixes:
1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/6de9b2f4b4724ef56efbb0339daaa66c8b68b1e7.1686616663.git.kjlx@templeofstupid.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Sat, 17 Jun 2023 20:36:21 +0000 (23:36 +0300)]
mmc: sunxi: fix deferred probing
commit
c2df53c5806cfd746dae08e07bc8c4ad247c3b70 upstream.
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit
ce753ad1549c ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes:
2408a08583d2 ("mmc: sunxi-mmc: Handle return value of platform_get_irq")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230617203622.6812-12-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Sat, 17 Jun 2023 20:36:11 +0000 (23:36 +0300)]
mmc: bcm2835: fix deferred probing
commit
71150ac12558bcd9d75e6e24cf7c872c2efd80f3 upstream.
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit
ce753ad1549c ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes:
660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-2-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergey Shtylyov [Sat, 17 Jun 2023 20:36:19 +0000 (23:36 +0300)]
mmc: sdhci-spear: fix deferred probing
commit
8d0caeedcd05a721f3cc2537b0ea212ec4027307 upstream.
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit
ce753ad1549c ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes:
682798a596a6 ("mmc: sdhci-spear: Handle return value of platform_get_irq")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230617203622.6812-10-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Kerello [Tue, 13 Jun 2023 13:41:46 +0000 (15:41 +0200)]
mmc: mmci: stm32: fix max busy timeout calculation
commit
47b3ad6b7842f49d374a01b054a4b1461a621bdc upstream.
The way that the timeout is currently calculated could lead to a u64
timeout value in mmci_start_command(). This value is then cast in a u32
register that leads to mmc erase failed issue with some SD cards.
Fixes:
8266c585f489 ("mmc: mmci: add hardware busy timeout feature")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230613134146.418016-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Hundebøll [Wed, 7 Jun 2023 08:27:12 +0000 (10:27 +0200)]
mmc: meson-gx: remove redundant mmc_request_done() call from irq context
commit
3c40eb8145325b0f5b93b8a169146078cb2c49d6 upstream.
The call to mmc_request_done() can schedule, so it must not be called
from irq context. Wake the irq thread if it needs to be called, and let
its existing logic do its work.
Fixes the following kernel bug, which appears when running an RT patched
kernel on the AmLogic Meson AXG A113X SoC:
[ 11.111407] BUG: scheduling while atomic: kworker/0:1H/75/0x00010001
[ 11.111438] Modules linked in:
[ 11.111451] CPU: 0 PID: 75 Comm: kworker/0:1H Not tainted 6.4.0-rc3-rt2-rtx-00081-gfd07f41ed6b4-dirty #1
[ 11.111461] Hardware name: RTX AXG A113X Linux Platform Board (DT)
[ 11.111469] Workqueue: kblockd blk_mq_run_work_fn
[ 11.111492] Call trace:
[ 11.111497] dump_backtrace+0xac/0xe8
[ 11.111510] show_stack+0x18/0x28
[ 11.111518] dump_stack_lvl+0x48/0x60
[ 11.111530] dump_stack+0x18/0x24
[ 11.111537] __schedule_bug+0x4c/0x68
[ 11.111548] __schedule+0x80/0x574
[ 11.111558] schedule_loop+0x2c/0x50
[ 11.111567] schedule_rtlock+0x14/0x20
[ 11.111576] rtlock_slowlock_locked+0x468/0x730
[ 11.111587] rt_spin_lock+0x40/0x64
[ 11.111596] __wake_up_common_lock+0x5c/0xc4
[ 11.111610] __wake_up+0x18/0x24
[ 11.111620] mmc_blk_mq_req_done+0x68/0x138
[ 11.111633] mmc_request_done+0x104/0x118
[ 11.111644] meson_mmc_request_done+0x38/0x48
[ 11.111654] meson_mmc_irq+0x128/0x1f0
[ 11.111663] __handle_irq_event_percpu+0x70/0x114
[ 11.111674] handle_irq_event_percpu+0x18/0x4c
[ 11.111683] handle_irq_event+0x80/0xb8
[ 11.111691] handle_fasteoi_irq+0xa4/0x120
[ 11.111704] handle_irq_desc+0x20/0x38
[ 11.111712] generic_handle_domain_irq+0x1c/0x28
[ 11.111721] gic_handle_irq+0x8c/0xa8
[ 11.111735] call_on_irq_stack+0x24/0x4c
[ 11.111746] do_interrupt_handler+0x88/0x94
[ 11.111757] el1_interrupt+0x34/0x64
[ 11.111769] el1h_64_irq_handler+0x18/0x24
[ 11.111779] el1h_64_irq+0x64/0x68
[ 11.111786] __add_wait_queue+0x0/0x4c
[ 11.111795] mmc_blk_rw_wait+0x84/0x118
[ 11.111804] mmc_blk_mq_issue_rq+0x5c4/0x654
[ 11.111814] mmc_mq_queue_rq+0x194/0x214
[ 11.111822] blk_mq_dispatch_rq_list+0x3ac/0x528
[ 11.111834] __blk_mq_sched_dispatch_requests+0x340/0x4d0
[ 11.111847] blk_mq_sched_dispatch_requests+0x38/0x70
[ 11.111858] blk_mq_run_work_fn+0x3c/0x70
[ 11.111865] process_one_work+0x17c/0x1f0
[ 11.111876] worker_thread+0x1d4/0x26c
[ 11.111885] kthread+0xe4/0xf4
[ 11.111894] ret_from_fork+0x10/0x20
Fixes:
51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20230607082713.517157-1-martin@geanix.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephan Gerhold [Thu, 18 May 2023 09:39:36 +0000 (11:39 +0200)]
mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916
commit
e6f9e590b72e12bbb86b1b8be7e1981f357392ad upstream.
While SDHCI claims to support 64-bit DMA on MSM8916 it does not seem to
be properly functional. It is not immediately obvious because SDHCI is
usually used with IOMMU bypassed on this SoC, and all physical memory
has 32-bit addresses. But when trying to enable the IOMMU it quickly
fails with an error such as the following:
arm-smmu 1e00000.iommu: Unhandled context fault:
fsr=0x402, iova=0xfffff200, fsynr=0xe0000, cbfrsynra=0x140, cb=3
mmc1: ADMA error: 0x02000000
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00002e02
mmc1: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000000
mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
mmc1: sdhci: Present: 0x03f80206 | Host ctl: 0x00000019
mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000001
mmc1: sdhci: Int enab: 0x03ff900b | Sig enab: 0x03ff100b
mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps: 0x322dc8b2 | Caps_1: 0x00008007
mmc1: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000
mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x5b590000
mmc1: sdhci: Resp[2]: 0xe6487f80 | Resp[3]: 0x0a404094
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x0000000ffffff224
mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP -----------
mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x60006400 | DLL cfg2: 0x00000000
mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00000000 | DDR cfg: 0x00000000
mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88018a8 Vndr func3: 0x00000000
mmc1: sdhci: ============================================
mmc1: sdhci:
fffffffff200: DMA 0x0000ffffffffe100, LEN 0x0008, Attr=0x21
mmc1: sdhci:
fffffffff20c: DMA 0x0000000000000000, LEN 0x0000, Attr=0x03
Looking closely it's obvious that only the 32-bit part of the address
(0xfffff200) arrives at the SMMU, the higher 16-bit (0xffff...) get
lost somewhere. This might not be a limitation of the SDHCI itself but
perhaps the bus/interconnect it is connected to, or even the connection
to the SMMU.
Work around this by setting SDHCI_QUIRK2_BROKEN_64_BIT_DMA to avoid
using 64-bit addresses.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230518-msm8916-64bit-v1-1-5694b0f35211@gerhold.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jisheng Zhang [Sat, 17 Jun 2023 08:53:19 +0000 (16:53 +0800)]
mmc: litex_mmc: set PROBE_PREFER_ASYNCHRONOUS
commit
f334ad47683606b682b4166b800d8b372d315436 upstream.
mmc host drivers should have enabled the asynchronous probe option, but
it seems like we didn't set it for litex_mmc when introducing litex mmc
support, so let's set it now.
Tested with linux-on-litex-vexriscv on sipeed tang nano 20K fpga.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Fixes:
92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230617085319.2139-1-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Sun, 11 Jun 2023 13:48:12 +0000 (22:48 +0900)]
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex in freezer_css_{online,offline}()
commit
f0cc749254d12c78e93dae3b27b21dc9546843d0 upstream.
syzbot is again reporting circular locking dependency between
cpu_hotplug_lock and freezer_mutex. Do like what we did with
commit
57dcd64c7e036299 ("cgroup,freezer: hold cpu_hotplug_lock
before freezer_mutex").
Reported-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=
2ab700fe1829880a2ec6
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Fixes:
f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiu Jianfeng [Sat, 10 Jun 2023 09:26:43 +0000 (17:26 +0800)]
cgroup: Do not corrupt task iteration when rebinding subsystem
commit
6f363f5aa845561f7ea496d8b1175e3204470486 upstream.
We found a refcount UAF bug as follows:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 342 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x148
Workqueue: events cpuset_hotplug_workfn
Call trace:
refcount_warn_saturate+0xa0/0x148
__refcount_add.constprop.0+0x5c/0x80
css_task_iter_advance_css_set+0xd8/0x210
css_task_iter_advance+0xa8/0x120
css_task_iter_next+0x94/0x158
update_tasks_root_domain+0x58/0x98
rebuild_root_domains+0xa0/0x1b0
rebuild_sched_domains_locked+0x144/0x188
cpuset_hotplug_workfn+0x138/0x5a0
process_one_work+0x1e8/0x448
worker_thread+0x228/0x3e0
kthread+0xe0/0xf0
ret_from_fork+0x10/0x20
then a kernel panic will be triggered as below:
Unable to handle kernel paging request at virtual address
00000000c0000010
Call trace:
cgroup_apply_control_disable+0xa4/0x16c
rebind_subsystems+0x224/0x590
cgroup_destroy_root+0x64/0x2e0
css_free_rwork_fn+0x198/0x2a0
process_one_work+0x1d4/0x4bc
worker_thread+0x158/0x410
kthread+0x108/0x13c
ret_from_fork+0x10/0x18
The race that cause this bug can be shown as below:
(hotplug cpu) | (umount cpuset)
mutex_lock(&cpuset_mutex) | mutex_lock(&cgroup_mutex)
cpuset_hotplug_workfn |
rebuild_root_domains | rebind_subsystems
update_tasks_root_domain | spin_lock_irq(&css_set_lock)
css_task_iter_start | list_move_tail(&cset->e_cset_node[ss->id]
while(css_task_iter_next) | &dcgrp->e_csets[ss->id]);
css_task_iter_end | spin_unlock_irq(&css_set_lock)
mutex_unlock(&cpuset_mutex) | mutex_unlock(&cgroup_mutex)
Inside css_task_iter_start/next/end, css_set_lock is hold and then
released, so when iterating task(left side), the css_set may be moved to
another list(right side), then it->cset_head points to the old list head
and it->cset_pos->next points to the head node of new list, which can't
be used as struct css_set.
To fix this issue, switch from all css_sets to only scgrp's css_sets to
patch in-flight iterators to preserve correct iteration, and then
update it->cset_head as well.
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://www.spinics.net/lists/cgroups/msg37935.html
Suggested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/all/20230526114139.70274-1-xiujianfeng@huaweicloud.com/
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Fixes:
2d8f243a5e6e ("cgroup: implement cgroup->e_csets[]")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:21 +0000 (18:24 +0200)]
mptcp: consolidate fallback and non fallback state machine
commit
81c1d029016001f994ce1c46849c5e9900d8eab8 upstream.
An orphaned msk releases the used resources via the worker,
when the latter first see the msk in CLOSED status.
If the msk status transitions to TCP_CLOSE in the release callback
invoked by the worker's final release_sock(), such instance of the
workqueue will not take any action.
Additionally the MPTCP code prevents scheduling the worker once the
socket reaches the CLOSE status: such msk resources will be leaked.
The only code path that can trigger the above scenario is the
__mptcp_check_send_data_fin() in fallback mode.
Address the issue removing the special handling of fallback socket
in __mptcp_check_send_data_fin(), consolidating the state machine
for fallback and non fallback socket.
Since non-fallback sockets do not send and do not receive data_fin,
the mptcp code can update the msk internal status to match the next
step in the SM every time data fin (ack) should be generated or
received.
As a consequence we can remove a bunch of checks for fallback from
the fastpath.
Fixes:
6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:20 +0000 (18:24 +0200)]
mptcp: fix possible list corruption on passive MPJ
commit
56a666c48b038e91b76471289e2cf60c79d326b9 upstream.
At passive MPJ time, if the msk socket lock is held by the user,
the new subflow is appended to the msk->join_list under the msk
data lock.
In mptcp_release_cb()/__mptcp_flush_join_list(), the subflows in
that list are moved from the join_list into the conn_list under the
msk socket lock.
Append and removal could race, possibly corrupting such list.
Address the issue splicing the join list into a temporary one while
still under the msk data lock.
Found by code inspection, the race itself should be almost impossible
to trigger in practice.
Fixes:
3e5014909b56 ("mptcp: cleanup MPJ subflow list handling")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:19 +0000 (18:24 +0200)]
mptcp: fix possible divide by zero in recvmsg()
commit
0ad529d9fd2bfa3fc619552a8d2fb2f2ef0bce2e upstream.
Christoph reported a divide by zero bug in mptcp_recvmsg():
divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018
Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60
RSP: 0018:
ffffc90000a07a18 EFLAGS:
00010246
RAX:
000000000000ffd7 RBX:
000000000000ffd7 RCX:
0000000000040000
RDX:
0000000000000000 RSI:
000000000003ffff RDI:
0000000000040000
RBP:
000000000000ffd7 R08:
ffffffff820cf297 R09:
0000000000000001
R10:
0000000000000000 R11:
ffffffff8103d1a0 R12:
0000000000003f00
R13:
0000000000300000 R14:
ffff888101cf3540 R15:
0000000000180000
FS:
00007f9af4c09640(0000) GS:
ffff88813bd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000001b33824000 CR3:
000000012f241001 CR4:
0000000000170ee0
Call Trace:
<TASK>
__tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611
mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034
inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861
____sys_recvmsg+0x269/0x2b0 net/socket.c:1019
___sys_recvmsg+0xe6/0x260 net/socket.c:2764
do_recvmmsg+0x1a5/0x470 net/socket.c:2858
__do_sys_recvmmsg net/socket.c:2937 [inline]
__se_sys_recvmmsg net/socket.c:2953 [inline]
__x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f9af58fc6a9
Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48
RSP: 002b:
00007f9af4c08cd8 EFLAGS:
00000246 ORIG_RAX:
000000000000012b
RAX:
ffffffffffffffda RBX:
00000000006bc050 RCX:
00007f9af58fc6a9
RDX:
0000000000000001 RSI:
0000000020000140 RDI:
0000000000000004
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000f00 R11:
0000000000000246 R12:
00000000006bc05c
R13:
fffffffffffffea8 R14:
00000000006bc050 R15:
000000000001fe40
</TASK>
mptcp_recvmsg is allowed to release the msk socket lock when
blocking, and before re-acquiring it another thread could have
switched the sock to TCP_LISTEN status - with a prior
connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss.
Address the issue preventing the disconnect if some other process is
concurrently performing a blocking syscall on the same socket, alike
commit
4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting").
Fixes:
a6b118febbab ("mptcp: add receive buffer auto-tuning")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/404
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:18 +0000 (18:24 +0200)]
mptcp: handle correctly disconnect() failures
commit
c2b2ae3925b65070adb27d5a31a31c376f26dec7 upstream.
Currently the mptcp code has assumes that disconnect() can fail only
at mptcp_sendmsg_fastopen() time - to avoid a deadlock scenario - and
don't even bother returning an error code.
Soon mptcp_disconnect() will handle more error conditions: let's track
them explicitly.
As a bonus, explicitly annotate TCP-level disconnect as not failing:
the mptcp code never blocks for event on the subflows.
Fixes:
7d803344fdc3 ("mptcp: fix deadlock in fastopen error path")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Mon, 19 Jun 2023 15:41:05 +0000 (09:41 -0600)]
io_uring/net: disable partial retries for recvmsg with cmsg
commit
78d0d2063bab954d19a1696feae4c7706a626d48 upstream.
We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.
Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.
Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Mon, 19 Jun 2023 15:35:34 +0000 (09:35 -0600)]
io_uring/net: clear msg_controllen on partial sendmsg retry
commit
b1dc492087db0f2e5a45f1072a743d04618dd6be upstream.
If we have cmsg attached AND we transferred partial data at least, clear
msg_controllen on retry so we don't attempt to send that again.
Cc: stable@vger.kernel.org # 5.10+
Fixes:
cac9e4418f4c ("io_uring/net: save msghdr->msg_control for retries")
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Thu, 15 Jun 2023 04:44:51 +0000 (21:44 -0700)]
PCI: hv: Add a per-bus mutex state_lock
commit
067d6ec7ed5b49380688e06c1e5f883a71bef4fe upstream.
In the case of fast device addition/removal, it's possible that
hv_eject_device_work() can start to run before create_root_hv_pci_bus()
starts to run; as a result, the pci_get_domain_bus_and_slot() in
hv_eject_device_work() can return a 'pdev' of NULL, and
hv_eject_device_work() can remove the 'hpdev', and immediately send a
message PCI_EJECTION_COMPLETE to the host, and the host immediately
unassigns the PCI device from the guest; meanwhile,
create_root_hv_pci_bus() and the PCI device driver can be probing the
dead PCI device and reporting timeout errors.
Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the
mutex before powering on the PCI bus in hv_pci_enter_d0(): when
hv_eject_device_work() starts to run, it's able to find the 'pdev' and call
pci_stop_and_remove_bus_device(pdev): if the PCI device driver has
loaded, the PCI device driver's probe() function is already called in
create_root_hv_pci_bus() -> pci_bus_add_devices(), and now
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able
to call the PCI device driver's remove() function and remove the device
reliably; if the PCI device driver hasn't loaded yet, the function call
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to
remove the PCI device reliably and the PCI device driver's probe()
function won't be called; if the PCI device driver's probe() is already
running (e.g., systemd-udev is loading the PCI device driver), it must
be holding the per-device lock, and after the probe() finishes and releases
the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is
able to proceed to remove the device reliably.
Fixes:
4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-6-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Thu, 15 Jun 2023 04:44:48 +0000 (21:44 -0700)]
PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic
commit
2738d5ab7929a845b654cd171a1e275c37eb428e upstream.
When the host tries to remove a PCI device, the host first sends a
PCI_EJECT message to the guest, and the guest is supposed to gracefully
remove the PCI device and send a PCI_EJECTION_COMPLETE message to the host;
the host then sends a VMBus message CHANNELMSG_RESCIND_CHANNELOFFER to
the guest (when the guest receives this message, the device is already
unassigned from the guest) and the guest can do some final cleanup work;
if the guest fails to respond to the PCI_EJECT message within one minute,
the host sends the VMBus message CHANNELMSG_RESCIND_CHANNELOFFER and
removes the PCI device forcibly.
In the case of fast device addition/removal, it's possible that the PCI
device driver is still configuring MSI-X interrupts when the guest receives
the PCI_EJECT message; the channel callback calls hv_pci_eject_device(),
which sets hpdev->state to hv_pcichild_ejecting, and schedules a work
hv_eject_device_work(); if the PCI device driver is calling
pci_alloc_irq_vectors() -> ... -> hv_compose_msi_msg(), we can break the
while loop in hv_compose_msi_msg() due to the updated hpdev->state, and
leave data->chip_data with its default value of NULL; later, when the PCI
device driver calls request_irq() -> ... -> hv_irq_unmask(), the guest
crashes in hv_arch_irq_unmask() due to data->chip_data being NULL.
Fix the issue by not testing hpdev->state in the while loop: when the
guest receives PCI_EJECT, the device is still assigned to the guest, and
the guest has one minute to finish the device removal gracefully. We don't
really need to (and we should not) test hpdev->state in the loop.
Fixes:
de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-3-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Thu, 15 Jun 2023 04:44:49 +0000 (21:44 -0700)]
PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev
commit
add9195e69c94b32e96f78c2f9cea68f0e850b3f upstream.
The hpdev->state is never really useful. The only use in
hv_pci_eject_device() and hv_eject_device_work() is not really necessary.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-4-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Thu, 15 Jun 2023 04:44:50 +0000 (21:44 -0700)]
Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"
commit
a847234e24d03d01a9566d1d9dcce018cc018d67 upstream.
This reverts commit
d6af2ed29c7c1c311b96dac989dcb991e90ee195.
The statement "the hv_pci_bus_exit() call releases structures of all its
child devices" in commit
d6af2ed29c7c is not true: in the path
hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
child "struct hv_pci_dev *hpdev" that is created earlier in
pci_devices_present_work() -> new_pcichild_device().
The commit
d6af2ed29c7c was originally made in July 2020 for RHEL 7.7,
where the old version of hv_pci_bus_exit() was used; when the commit was
rebased and merged into the upstream, people didn't notice that it's
not really necessary. The commit itself doesn't cause any issue, but it
makes hv_pci_probe() more complicated. Revert it to facilitate some
upcoming changes to hv_pci_probe().
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Wei Hu <weh@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-5-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Thu, 15 Jun 2023 04:44:47 +0000 (21:44 -0700)]
PCI: hv: Fix a race condition bug in hv_pci_query_relations()
commit
440b5e3663271b0ffbd4908115044a6a51fb938b upstream.
Since day 1 of the driver, there has been a race between
hv_pci_query_relations() and survey_child_resources(): during fast
device hotplug, hv_pci_query_relations() may error out due to
device-remove and the stack variable 'comp' is no longer valid;
however, pci_devices_present_work() -> survey_child_resources() ->
complete() may be running on another CPU and accessing the no-longer-valid
'comp'. Fix the race by flushing the workqueue before we exit from
hv_pci_query_relations().
Fixes:
4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-2-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Kelley [Thu, 18 May 2023 15:13:52 +0000 (08:13 -0700)]
Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs
commit
320805ab61e5f1e2a5729ae266e16bec2904050c upstream.
vmbus_wait_for_unload() may be called in the panic path after other
CPUs are stopped. vmbus_wait_for_unload() currently loops through
online CPUs looking for the UNLOAD response message. But the values of
CONFIG_KEXEC_CORE and crash_kexec_post_notifiers affect the path used
to stop the other CPUs, and in one of the paths the stopped CPUs
are removed from cpu_online_mask. This removal happens in both
x86/x64 and arm64 architectures. In such a case, vmbus_wait_for_unload()
only checks the panic'ing CPU, and misses the UNLOAD response message
except when the panic'ing CPU is CPU 0. vmbus_wait_for_unload()
eventually times out, but only after waiting 100 seconds.
Fix this by looping through *present* CPUs in vmbus_wait_for_unload().
The cpu_present_mask is not modified by stopping the other CPUs in the
panic path, nor should it be.
Also, in a CoCo VM the synic_message_page is not allocated in
hv_synic_alloc(), but is set and cleared in hv_synic_enable_regs()
and hv_synic_disable_regs() such that it is set only when the CPU is
online. If not all present CPUs are online when vmbus_wait_for_unload()
is called, the synic_message_page might be NULL. Add a check for this.
Fixes:
cd95aad55793 ("Drivers: hv: vmbus: handle various crash scenarios")
Cc: stable@vger.kernel.org
Reported-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1684422832-38476-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Thu, 4 May 2023 22:41:55 +0000 (15:41 -0700)]
Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails
commit
ec97e112985c2581ee61854a4b74f080f6cdfc2c upstream.
Commit
572086325ce9 ("Drivers: hv: vmbus: Cleanup synic memory free path")
says "Any memory allocations that succeeded will be freed when the caller
cleans up by calling hv_synic_free()", but if the get_zeroed_page() in
hv_synic_alloc() fails, currently hv_synic_free() is not really called
in vmbus_bus_init(), consequently there will be a memory leak, e.g.
hv_context.hv_numa_map is not freed in the error path. Fix this by
updating the goto labels.
Cc: stable@kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes:
4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230504224155.10484-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin Shan [Thu, 15 Jun 2023 05:42:59 +0000 (15:42 +1000)]
KVM: Avoid illegal stage2 mapping on invalid memory slot
commit
2230f9e1171a2e9731422a14d1bbc313c0b719d1 upstream.
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.
The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().
CPU-A CPU-B
----- -----
ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
kvm_vm_ioctl_set_memory_region
kvm_set_memory_region
__kvm_set_memory_region
kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
kvm_invalidate_memslot
kvm_copy_memslot
kvm_replace_memslot
kvm_swap_active_memslots (A)
kvm_arch_flush_shadow_memslot (B)
same page sharing by KSM
kvm_mmu_notifier_invalidate_range_start
:
kvm_mmu_notifier_change_pte
kvm_handle_hva_range
__kvm_handle_hva_range
kvm_set_spte_gfn (C)
:
kvm_mmu_notifier_invalidate_range_end
Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.
We tried a git-bisect and the first problematic commit is
cd4c71835228 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit
d5d8184d35c9
("KVM: ARM: Memory virtualization setup").
Cc: stable@vger.kernel.org # v3.9+
Fixes:
d5d8184d35c9 ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <
20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Wed, 14 Jun 2023 15:29:21 +0000 (17:29 +0200)]
ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()
commit
22db06337f590d01d79f60f181d8dfe5a9ef9085 upstream.
The addition of might_sleep() to down_timeout() caused the latter to
enable interrupts unconditionally in some cases, which in turn broke
the ACPI S3 wakeup path in acpi_suspend_enter(), where down_timeout()
is called by acpi_disable_all_gpes() via acpi_ut_acquire_mutex().
Namely, if CONFIG_DEBUG_ATOMIC_SLEEP is set, might_sleep() causes
might_resched() to be used and if CONFIG_PREEMPT_VOLUNTARY is set,
this triggers __cond_resched() which may call preempt_schedule_common(),
so __schedule() gets invoked and it ends up with enabled interrupts (in
the prev == next case).
Now, enabling interrupts early in the S3 wakeup path causes the kernel
to crash.
Address this by modifying acpi_suspend_enter() to disable GPEs without
attempting to acquire the sleeping lock which is not needed in that code
path anyway.
Fixes:
99409b935c9a ("locking/semaphore: Add might_sleep() to down_*() family")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryusuke Konishi [Fri, 9 Jun 2023 03:57:32 +0000 (12:57 +0900)]
nilfs2: fix buffer corruption due to concurrent device reads
commit
679bd7ebdd315bf457a4740b306ae99f1d0a403d upstream.
As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.
Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.
In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write. This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.
Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.
When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others. As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.
Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB. In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying. So fix these potential
issues as well.
Link: https://lkml.kernel.org/r/20230609035732.20426-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+31837fe952932efc8fb9@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/
00000000000030000a05e981f475@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prathu Baronia [Thu, 8 Jun 2023 15:44:49 +0000 (21:14 +0530)]
scripts: fix the gfp flags header path in gfp-translate
commit
2049a7d0cbc6ac8e370e836ed68597be04a7dc49 upstream.
Since gfp flags have been shifted to gfp_types.h so update the path in
the gfp-translate script.
Link: https://lkml.kernel.org/r/20230608154450.21758-1-prathubaronia2011@gmail.com
Fixes:
cb5a065b4ea9c ("headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>")
Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael Aquini [Tue, 6 Jun 2023 23:36:13 +0000 (19:36 -0400)]
writeback: fix dereferencing NULL mapping->host on writeback_page_template
commit
54abe19e00cfcc5a72773d15cd00ed19ab763439 upstream.
When commit
19343b5bdd16 ("mm/page-writeback: introduce tracepoint for
wait_on_page_writeback()") repurposed the writeback_dirty_page trace event
as a template to create its new wait_on_page_writeback trace event, it
ended up opening a window to NULL pointer dereference crashes due to the
(infrequent) occurrence of a race where an access to a page in the
swap-cache happens concurrently with the moment this page is being written
to disk and the tracepoint is enabled:
BUG: kernel NULL pointer dereference, address:
0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
800000010ec0a067 P4D
800000010ec0a067 PUD
102353067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023
RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0
Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d
RSP: 0000:
ffffaad580b6fb60 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
ffff90e38035c01c RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff90e38035c044
RBP:
ffff90e38035c024 R08:
0000000000000002 R09:
0000000000000006
R10:
ffff90e38035c02e R11:
0000000000000020 R12:
ffff90e380bac000
R13:
ffffe3a7456d9200 R14:
0000000000001b81 R15:
ffffe3a7456d9200
FS:
00007f2e4e8a15c0(0000) GS:
ffff90e3fbc80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000040 CR3:
00000001150c6003 CR4:
0000000000170ee0
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x76/0x170
? kernelmode_fixup_or_oops+0x84/0x110
? exc_page_fault+0x65/0x150
? asm_exc_page_fault+0x22/0x30
? trace_event_raw_event_writeback_folio_template+0x76/0xf0
folio_wait_writeback+0x6b/0x80
shmem_swapin_folio+0x24a/0x500
? filemap_get_entry+0xe3/0x140
shmem_get_folio_gfp+0x36e/0x7c0
? find_busiest_group+0x43/0x1a0
shmem_fault+0x76/0x2a0
? __update_load_avg_cfs_rq+0x281/0x2f0
__do_fault+0x33/0x130
do_read_fault+0x118/0x160
do_pte_missing+0x1ed/0x2a0
__handle_mm_fault+0x566/0x630
handle_mm_fault+0x91/0x210
do_user_addr_fault+0x22c/0x740
exc_page_fault+0x65/0x150
asm_exc_page_fault+0x22/0x30
This problem arises from the fact that the repurposed writeback_dirty_page
trace event code was written assuming that every pointer to mapping
(struct address_space) would come from a file-mapped page-cache object,
thus mapping->host would always be populated, and that was a valid case
before commit
19343b5bdd16. The swap-cache address space
(swapper_spaces), however, doesn't populate its ->host (struct inode)
pointer, thus leading to the crashes in the corner-case aforementioned.
commit
19343b5bdd16 ended up breaking the assignment of __entry->name and
__entry->ino for the wait_on_page_writeback tracepoint -- both dependent
on mapping->host carrying a pointer to a valid inode. The assignment of
__entry->name was fixed by commit
68f23b89067f ("memcg: fix a crash in
wb_workfn when a device disappears"), and this commit fixes the remaining
case, for __entry->ino.
Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com
Fixes:
19343b5bdd16 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()")
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 22 Jun 2023 15:43:07 +0000 (17:43 +0200)]
selftests: mptcp: join: fix "userspace pm add & remove address"
It looks like this test was broken in v6.1 after the backport of commit
48d73f609dcc ("selftests: mptcp: update userspace pm addr tests").
It was not working because the commit
ad3493746ebe ("selftests: mptcp:
add test-cases for mixed v4/v6 subflows") is not in v6.1. This commit
changes how the connections are being created in mptcp_join.sh selftest:
with IPv6 support always enabled. But then in v6.1, the server still
create IPv4 only connections, so without the v4-mapped-v6 format with
the "::ffff:" prefix like we have in v6.3.
The modification here adds a support for connections created in v4 as
well so it fixes the issue in v6.1. This patch is not needed for the
selftests in v6.3 because only IPv6 listening sockets are being created.
Fixes:
8f0ba8ec18f5 ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 22 Jun 2023 10:40:01 +0000 (12:40 +0200)]
selftests: mptcp: join: skip fail tests if not supported
commit
ff8897b5189495b47895ca247b860a29dc04b36b upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the MP_FAIL / infinite mapping introduced
by commit
1e39e5a32ad7 ("mptcp: infinite mapping sending") and the
following ones.
It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Fixes:
2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 22 Jun 2023 10:39:14 +0000 (12:39 +0200)]
selftests: mptcp: join: skip userspace PM tests if not supported
commit
f2b492b04a167261e1c38eb76f78fb4294473a49 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the userspace PM introduced by commit
4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs")
and the following ones.
It is possible to look for the MPTCP pm_type's sysctl knob to know in
advance if the userspace PM is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 22 Jun 2023 10:37:54 +0000 (12:37 +0200)]
selftests: mptcp: join: skip test if iptables/tc cmds fail
commit
4a0b866a3f7d3c22033f40e93e94befc6fe51bce upstream
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 22 Jun 2023 09:17:09 +0000 (11:17 +0200)]
selftests: mptcp: sockopt: skip TCP_INQ checks if not supported
commit
b631e3a4e94c77c9007d60b577a069c203ce9594 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is TCP_INQ cmsg support introduced in commit
2c9e77659a0c
("mptcp: add TCP_INQ cmsg support").
It is possible to look for "mptcp_ioctl" in kallsyms because it was
needed to introduce the mentioned feature. We can skip these tests and
not set TCPINQ option if the feature is not supported.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
5cbd886ce2a9 ("selftests: mptcp: add TCP_INQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:47 +0000 (18:38 +0200)]
selftests: mptcp: diag: skip listen tests if not supported
commit
dc97251bf0b70549c76ba261516c01b8096771c5 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the listen diag dump support introduced by
commit
4fa39b701ce9 ("mptcp: listen diag dump support").
It looks like there is no good pre-check to do here, i.e. dedicated
function available in kallsyms. Instead, we try to get info if nothing
is returned, the test is marked as skipped.
That's not ideal because something could be wrong with the feature and
instead of reporting an error, the test could be marked as skipped. If
we know in advanced that the feature is supposed to be supported, the
tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in
this case the test will report an error instead of marking the test as
skipped if nothing is returned.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
f2ae0fa68e28 ("selftests/mptcp: add diag listen tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Mon, 13 Feb 2023 18:20:07 +0000 (11:20 -0700)]
selftests/mount_setattr: fix redefine struct mount_attr build error
commit
d8e45bf1aed2e5fddd8985b5bb1aaf774a97aba8 upstream.
Fix the following build error due to redefining struct mount_attr by
removing duplicate define from mount_setattr_test.c
gcc -g -isystem .../tools/testing/selftests/../../../usr/include -Wall -O2 -pthread mount_setattr_test.c -o .../tools/testing/selftests/mount_setattr/mount_setattr_test
mount_setattr_test.c:107:8: error: redefinition of ‘struct mount_attr’
107 | struct mount_attr {
| ^~~~~~~~~~
In file included from /usr/include/x86_64-linux-gnu/sys/mount.h:32,
from mount_setattr_test.c:10:
.../usr/include/linux/mount.h:129:8: note: originally defined here
129 | struct mount_attr {
| ^~~~~~~~~~
make: *** [../lib.mk:145: .../tools/testing/selftests/mount_setattr/mount_setattr_test] Error 1
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Hardik Garg <hargar@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:49 +0000 (18:11 +0200)]
selftests: mptcp: join: skip MPC backups tests if not supported
commit
632978f0a961b4591a05ba9e39eab24541d83e84 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit
c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:46 +0000 (18:11 +0200)]
selftests: mptcp: join: skip fullmesh flag tests if not supported
commit
9db34c4294af9999edc773d96744e2d2d4eb5060 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the fullmesh flag for the in-kernel PM
introduced by commit
2843ff6f36db ("mptcp: remote addresses fullmesh")
and commit
1a0d6136c5f0 ("mptcp: local addresses fullmesh").
It looks like there is no easy external sign we can use to predict the
expected behaviour. We could add the flag and then check if it has been
added but for that, and for each fullmesh test, we would need to setup a
new environment, do the checks, clean it and then only start the test
from yet another clean environment. To keep it simple and avoid
introducing new issues, we look for a specific kernel version. That's
not ideal but an acceptable solution for this case.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
6a0653b96f5d ("selftests: mptcp: add fullmesh setting tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:45 +0000 (18:11 +0200)]
selftests: mptcp: join: skip backup if set flag on ID not supported
commit
07216a3c5d926bf1b6b360a0073747228a1f9b7f upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Commit
bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
has simplified the way the backup flag is set on an endpoint. Instead of
doing:
./pm_nl_ctl set 10.0.2.1 flags backup
Now we do:
./pm_nl_ctl set id 1 flags backup
The new way is easier to maintain but it is also incompatible with older
kernels not supporting the implicit endpoints putting in place the
infrastructure to set flags per ID, hence the second Fixes tag.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
Cc: stable@vger.kernel.org
Fixes:
4cf86ae84c71 ("mptcp: strict local address ID selection")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:44 +0000 (18:11 +0200)]
selftests: mptcp: join: skip implicit tests if not supported
commit
36c4127ae8dd0ebac6d56d8a1b272dd483471c40 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the implicit endpoints introduced by
commit
d045b9eb95a9 ("mptcp: introduce implicit endpoints").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Note that here and in the following commits, we re-do the same check for
each sub-test of the same function for a few reasons. The main one is
not to break the ID assign to each test in order to be able to easily
compare results between different kernel versions. Also, we can still
run a specific test even if it is skipped. Another reason is that it
makes it clear during the review that a specific subtest will be skipped
or not under certain conditions. At the end, it looks OK to call the
exact same helper multiple times: it is not a critical path and it is
the same code that is executed, not really more cases to maintain.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:43 +0000 (18:11 +0200)]
selftests: mptcp: join: support RM_ADDR for used endpoints or not
commit
425ba803124b90cb9124d99f13b372a89dc151d9 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a UAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.
It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
6fa0174a7c86 ("mptcp: more careful RM_ADDR generation")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:42 +0000 (18:11 +0200)]
selftests: mptcp: join: skip Fastclose tests if not supported
commit
ae947bb2c253ff5f395bb70cb9db8700543bf398 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of MP_FASTCLOSE introduced in commit
f284c0c77321 ("mptcp: implement fastclose xmit path").
If the MIB counter is not available, the test cannot be verified and the
behaviour will not be the expected one. So we can skip the test if the
counter is missing.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
01542c9bf9ab ("selftests: mptcp: add fastclose testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:41 +0000 (18:11 +0200)]
selftests: mptcp: join: support local endpoint being tracked or not
commit
d4c81bbb8600257fd3076d0196cb08bd2e5bdf24 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a uAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.
It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms
because it was needed to introduce the mentioned feature. So we can know
in advance what the behaviour we are expecting here instead of
supporting the two behaviours.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:39 +0000 (18:11 +0200)]
selftests: mptcp: join: skip check if MIB counter not supported
commit
47867f0a7e831e24e5eab3330667ce9682d50fb1 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit
fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.
Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:38 +0000 (18:11 +0200)]
selftests: mptcp: join: helpers to skip tests
commit
cdb50525345cf5a8359ee391032ef606a7826f08 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.
While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:37 +0000 (18:11 +0200)]
selftests: mptcp: join: use 'iptables-legacy' if available
commit
0c4cd3f86a40028845ad6f8af5b37165666404cd upstream.
IPTables commands using 'iptables-nft' fail on old kernels, at least
5.15 because it doesn't see the default IPTables chains:
$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported
As a first step before switching to NFTables, we can use iptables-legacy
if available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Sat, 10 Jun 2023 16:11:36 +0000 (18:11 +0200)]
selftests: mptcp: lib: skip if not below kernel version
commit
b1a6a38ab8a633546cefae890da842f19e006c74 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.
Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.
This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:55 +0000 (18:38 +0200)]
selftests: mptcp: userspace pm: skip if not supported
commit
f90adb033891d418c5dafef34a9aa49f3c860991 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP Userspace PM introduced by commit
4638de5aefe5
("mptcp: handle local addrs announced by userspace PMs").
We can skip all these tests if the feature is not supported simply by
looking for the MPTCP pm_type's sysctl knob.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:54 +0000 (18:38 +0200)]
selftests: mptcp: userspace pm: skip if 'ip' tool is unavailable
commit
723d6b9b12338c1caf06bf6fe269962ef04e2c71 upstream.
When a required tool is missing, the return code 4 (SKIP) should be
returned instead of 1 (FAIL).
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:52 +0000 (18:38 +0200)]
selftests: mptcp: sockopt: skip getsockopt checks if not supported
commit
c6f7eccc519837ebde1d099d9610c4f1d5bd975e upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit
55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
It is possible to look for "mptcp_diag_fill_info" in kallsyms because
it is introduced by the mentioned feature. So we can know in advance if
the feature is supported and skip the sub-test if not.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:51 +0000 (18:38 +0200)]
selftests: mptcp: sockopt: relax expected returned size
commit
8dee6ca2ac1e5630a7bb6a98bc0b686916fc2000 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit
55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
We cannot guess in advance which sizes the kernel will returned: older
kernel can returned smaller sizes, e.g. recently the tcp_info structure
has been modified in commit
71fc704768f6 ("tcp: add rcv_wnd and
plb_rehash to TCP_INFO") where a new field has been added.
The userspace can also expect a smaller size if it is compiled with old
uAPI kernel headers.
So for these sizes, we can only check if they are above a certain
threshold, 0 for the moment. We can also only compared sizes with the
ones set by the kernel.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:50 +0000 (18:38 +0200)]
selftests: mptcp: pm nl: skip fullmesh flag checks if not supported
commit
f3761b50b8e4cb4807b5d41e02144c8c8a0f2512 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the fullmesh flag that can be given to the MPTCP
in-kernel path-manager and introduced in commit
2843ff6f36db ("mptcp:
remote addresses fullmesh").
If the flag is not visible in the dump after having set it, we don't
check the content. Note that if we expect to have this feature and
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always
check the content to avoid regressions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
6da1dfdd037e ("selftests: mptcp: add set_flags tests in pm_netlink.sh")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:49 +0000 (18:38 +0200)]
selftests: mptcp: pm nl: remove hardcoded default limits
commit
2177d0b08e421971e035672b70f3228d9485c650 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the checks of the default limits returned by the MPTCP
in-kernel path-manager. The default values have been modified by commit
72bcbc46a5c3 ("mptcp: increase default max additional subflows to 2").
Instead of comparing with hardcoded values, we can get the default one
and compare with them.
Note that if we expect to have the latest version, we continue to check
the hardcoded values to avoid unexpected behaviour changes.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
eedbc685321b ("selftests: add PM netlink functional tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:45 +0000 (18:38 +0200)]
selftests: mptcp: connect: skip disconnect tests if not supported
commit
4ad39a42da2e9770c8e4c37fe632ed8898419129 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the full support of disconnections from the userspace
introduced by commit
b29fcfb54cd7 ("mptcp: full disconnect
implementation").
It is possible to look for "mptcp_pm_data_reset" in kallsyms because a
preparation patch added it to ease the introduction of the mentioned
feature.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:44 +0000 (18:38 +0200)]
selftests: mptcp: connect: skip transp tests if not supported
commit
07bf49401909264a38fa3427c3cce43e8304436a upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of IP(V6)_TRANSPARENT socket option with
MPTCP connections introduced by commit
c9406a23c116 ("mptcp: sockopt:
add SOL_IP freebind & transparent options").
It is possible to look for "__ip_sock_set_tos" in kallsyms because
IP(V6)_TRANSPARENT socket option support has been added after TOS
support which came with the required infrastructure in MPTCP sockopt
code. To support TOS, the following function has been exported (T). Not
great but better than checking for a specific kernel version.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
5fb62e9cd3ad ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Thu, 8 Jun 2023 16:38:43 +0000 (18:38 +0200)]
selftests: mptcp: lib: skip if missing symbol
commit
673004821ab98c6645bd21af56a290854e88f533 upstream.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.
These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Fri, 14 Apr 2023 15:47:10 +0000 (17:47 +0200)]
selftests: mptcp: join: fix ShellCheck warnings
commit
0fcd72df8847d3a62eb34a084862157ce0564a94 upstream.
Most of the code had an issue according to ShellCheck.
That's mainly due to the fact it incorrectly believes most of the code
was unreachable because it's invoked by variable name, see how the
"tests" array is used.
Once SC2317 has been ignored, three small warnings were still visible:
- SC2155: Declare and assign separately to avoid masking return values.
- SC2046: Quote this to prevent word splitting: can be ignored because
"ip netns pids" can display more than one pid.
- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
This probably didn't fix any actual issues but it might help spotting
new interesting warnings reported by ShellCheck as just before,
ShellCheck was reporting issues for most lines making it a bit useless.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthieu Baerts [Fri, 14 Apr 2023 15:47:09 +0000 (17:47 +0200)]
selftests: mptcp: remove duplicated entries in usage
commit
0a85264e48b642d360720589fdb837a3643fb9b0 upstream.
mptcp_connect tool was printing some duplicated entries when showing how
to use it: -j -l -r
While at it, I also:
- moved the very few entries that were not sorted,
- added -R that was missing since
commit
8a4b910d005d ("mptcp: selftests: add rcvbuf set option"),
- removed the -u parameter that has been removed in
commit
f730b65c9d85 ("selftests: mptcp: try to set mptcp ulp mode in different sk states").
No need to backport this, it is just an internal tool used by our
selftests. The help menu is mainly useful for MPTCP kernel devs.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Thu, 15 Jun 2023 09:18:30 +0000 (11:18 +0200)]
tick/common: Align tick period during sched_timer setup
commit
13bb06f8dd42071cb9a49f6e21099eea05d4b856 upstream.
The tick period is aligned very early while the first clock_event_device is
registered. At that point the system runs in periodic mode and switches
later to one-shot mode if possible.
The next wake-up event is programmed based on the aligned value
(tick_next_period) but the delta value, that is used to program the
clock_event_device, is computed based on ktime_get().
With the subtracted offset, the device fires earlier than the exact time
frame. With a large enough offset the system programs the timer for the
next wake-up and the remaining time left is too small to make any boot
progress. The system hangs.
Move the alignment later to the setup of tick_sched timer. At this point
the system switches to oneshot mode and a high resolution clocksource is
available. At this point it is safe to align tick_next_period because
ktime_get() will now return accurate (not jiffies based) time.
[bigeasy: Patch description + testing].
Fixes:
e9523a0d81899 ("tick/common: Align tick period with the HZ tick.")
Reported-by: Mathias Krause <minipli@grsecurity.net>
Reported-by: "Bhatnagar, Rishabh" <risbhat@amazon.com>
Suggested-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Acked-by: SeongJae Park <sj@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/5a56290d-806e-b9a5-f37c-f21958b5a8c0@grsecurity.net
Link: https://lore.kernel.org/12c6f9a3-d087-b824-0d05-0d18c9bc1bf3@amazon.com
Link: https://lore.kernel.org/r/20230615091830.RxMV2xf_@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Thu, 15 Jun 2023 13:05:29 +0000 (22:05 +0900)]
ksmbd: validate session id and tree id in the compound request
commit
5005bcb4219156f1bf7587b185080ec1da08518e upstream.
This patch validate session id and tree id in compound request.
If first operation in the compound is SMB2 ECHO request, ksmbd bypass
session and tree validation. So work->sess and work->tcon could be NULL.
If secound request in the compound access work->sess or tcon, It cause
NULL pointer dereferecing error.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21165
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Thu, 15 Jun 2023 13:04:40 +0000 (22:04 +0900)]
ksmbd: fix out-of-bound read in smb2_write
commit
5fe7f7b78290638806211046a99f031ff26164e1 upstream.
ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If
->NextCommand is bigger than Offset + Length of smb2 write, It will
allow oversized smb2 write length. It will cause OOB read in smb2_write.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21164
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Sun, 4 Jun 2023 16:57:34 +0000 (01:57 +0900)]
ksmbd: validate command payload size
commit
2b9b8f3b68edb3d67d79962f02e26dbb5ae3808d upstream.
->StructureSize2 indicates command payload size. ksmbd should validate
this size with rfc1002 length before accessing it.
This patch remove unneeded check and add the validation for this.
[ 8.912583] BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message+0x12a/0xc50
[ 8.913051] Read of size 2 at addr
ffff88800ac7d92c by task kworker/0:0/7
...
[ 8.914967] Call Trace:
[ 8.915126] <TASK>
[ 8.915267] dump_stack_lvl+0x33/0x50
[ 8.915506] print_report+0xcc/0x620
[ 8.916558] kasan_report+0xae/0xe0
[ 8.917080] kasan_check_range+0x35/0x1b0
[ 8.917334] ksmbd_smb2_check_message+0x12a/0xc50
[ 8.917935] ksmbd_verify_smb_message+0xae/0xd0
[ 8.918223] handle_ksmbd_work+0x192/0x820
[ 8.918478] process_one_work+0x419/0x760
[ 8.918727] worker_thread+0x2a2/0x6f0
[ 8.919222] kthread+0x187/0x1d0
[ 8.919723] ret_from_fork+0x1f/0x30
[ 8.919954] </TASK>
Cc: stable@vger.kernel.org
Reported-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Garrett [Sat, 31 Dec 2022 09:14:32 +0000 (01:14 -0800)]
tpm_crb: Add support for CRB devices based on Pluton
commit
4d2732882703791ea4b670df433f88fc4b40a5cb upstream.
Pluton is an integrated security processor present in some recent Ryzen
parts. If it's enabled, it presents two devices - an MSFT0101 ACPI device
that's broadly an implementation of a Command Response Buffer TPM2, and an
MSFT0200 ACPI device whose functionality I haven't examined in detail yet.
This patch only attempts to add support for the TPM device.
There's a few things that need to be handled here. The first is that the
TPM2 ACPI table uses a previously undefined start method identifier. The
table format appears to include 16 bytes of startup data, which corresponds
to one 64-bit address for a start message and one 64-bit address for a
completion response. The second is that the ACPI tables on the Thinkpad Z13
I'm testing this on don't define any memory windows in _CRS (or, more
accurately, there are two empty memory windows). This check doesn't seem
strictly necessary, so I've skipped that.
Finally, it seems like chip needs to be explicitly asked to transition into
ready status on every command. Failing to do this means that if two
commands are sent in succession without an idle/ready transition in
between, everything will appear to work fine but the response is simply the
original command. I'm working without any docs here, so I'm not sure if
this is actually the required behaviour or if I'm missing something
somewhere else, but doing this results in the chip working reliably.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: "Limonciello, Mario" <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:35 +0000 (14:55 +0100)]
tpm, tpm_tis: Claim locality in interrupt handler
commit
0e069265bce5a40c4eee52e2364bbbd4dabee94a upstream.
Writing the TPM_INT_STATUS register in the interrupt handler to clear the
interrupts only has effect if a locality is held. Since this is not
guaranteed at the time the interrupt is fired, claim the locality
explicitly in the handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov [Mon, 10 Apr 2023 17:43:44 +0000 (19:43 +0200)]
mm: Fix copy_from_user_nofault().
commit
d319f344561de23e810515d109c7278919bff7b0 upstream.
There are several issues with copy_from_user_nofault():
- access_ok() is designed for user context only and for that reason
it has WARN_ON_IN_IRQ() which triggers when bpf, kprobe, eprobe
and perf on ppc are calling it from irq.
- it's missing nmi_uaccess_okay() which is a nop on all architectures
except x86 where it's required.
The comment in arch/x86/mm/tlb.c explains the details why it's necessary.
Calling copy_from_user_nofault() from bpf, [ke]probe without this check is not safe.
- __copy_from_user_inatomic() under CONFIG_HARDENED_USERCOPY is calling
check_object_size()->__check_object_size()->check_heap_object()->find_vmap_area()->spin_lock()
which is not safe to do from bpf, [ke]probe and perf due to potential deadlock.
Fix all three issues. At the end the copy_from_user_nofault() becomes
equivalent to copy_from_user_nmi() from safety point of view with
a difference in the return value.
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Florian Lehner <dev@der-flo.net>
Tested-by: Hsin-Wei Hung <hsinweih@uci.edu>
Tested-by: Florian Lehner <dev@der-flo.net>
Link: https://lore.kernel.org/r/20230410174345.4376-2-dev@der-flo.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Javier Honduvilla Coto <javierhonduco@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Thu, 15 Jun 2023 08:18:53 +0000 (17:18 +0900)]
ata: libata-scsi: Avoid deadlock on rescan after device resume
[ Upstream commit
6aa0365a3c8512587fffd42fe438768709ddef8e ]
When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().
However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.
Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes:
a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Hodaszi [Fri, 9 Jun 2023 12:13:34 +0000 (14:13 +0200)]
tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A
[ Upstream commit
a82c3df955f8c1c726e4976527aa6ae924a67dd9 ]
LS1028A is using DMA with LPUART. Having RX watermark set to 1, means
DMA transactions are started only after receiving the second character.
On other platforms with newer LPUART IP, Receiver Idle Empty function
initiates the DMA request after the receiver is idling for 4 characters.
But this feature is missing on LS1028A, which is causing a 1-character
delay in the RX direction on this platform.
Set RX watermark to 0 to initiate RX DMA after each character.
Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@digi.com/
Fixes:
9ad9df844754 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case")
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com>
Message-ID: <
20230609121334.1878626-1-robert.hodaszi@digi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sherry Sun [Mon, 30 Jan 2023 06:44:44 +0000 (14:44 +0800)]
tty: serial: fsl_lpuart: make rx_watermark configurable for different platforms
[ Upstream commit
34ebb26f12a84b744f43c5c4869516f122a2dfaa ]
Add rx_watermark parameter for struct lpuart_port to make the receive
watermark configurable for different platforms.
No function changed.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230130064449.9564-2-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
a82c3df955f8 ("tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Chung [Mon, 29 May 2023 10:00:09 +0000 (18:00 +0800)]
drm/amd/display: fix the system hang while disable PSR
[ Upstream commit
ea2062dd1f0384ae1b136d333ee4ced15bedae38 ]
[Why]
When the PSR enabled. If you try to adjust the timing parameters,
it may cause system hang. Because the timing mismatch with the
DMCUB settings.
[How]
Disable the PSR before adjusting timing parameters.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Thu, 23 Feb 2023 18:36:08 +0000 (11:36 -0700)]
drm/amd/display: Add wrapper to call planes and stream update
[ Upstream commit
81f743a08f3b214638aa389e252ae5e6c3592e7c ]
[Why & How]
This commit is part of a sequence of changes that replaces the commit
sequence used in the DC with a new one. As a result of this transition,
we moved some specific parts from the commit sequence and brought them
to amdgpu_dm. This commit adds a wrapper inside DM that enable our
drivers to do any necessary preparation or change before we offload the
plane/stream update to DC.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
ea2062dd1f03 ("drm/amd/display: fix the system hang while disable PSR")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Thu, 6 Oct 2022 20:40:55 +0000 (16:40 -0400)]
drm/amd/display: Use dc_update_planes_and_stream
[ Upstream commit
f7511289821ffccc07579406d6ab520aa11049f5 ]
[Why & How]
The old dc_commit_updates_for_stream lacks manipulation for many corner
cases where the DC feature requires special attention; as a result, it
starts to show its limitation (e.g., the SubVP feature is not supported
by it, among other cases). To modernize and unify our internal API, this
commit replaces the old dc_commit_updates_for_stream with
dc_update_planes_and_stream, which has more features.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
ea2062dd1f03 ("drm/amd/display: fix the system hang while disable PSR")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 21 Jun 2023 14:01:03 +0000 (16:01 +0200)]
Linux 6.1.35
Link: https://lore.kernel.org/r/20230619102154.568541872@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Desaulniers [Wed, 14 Jun 2023 18:04:38 +0000 (11:04 -0700)]
kbuild: Update assembler calls to use proper flags and language target
commit
d5c8d6e0fa61401a729e9eb6a9c7077b2d3aebb0 upstream.
as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.
Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.
Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.
Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.
[nathan: Reworded and expanded on problems in commit message
Use '-x assembler-with-cpp' in a couple more places]
Link: https://github.com/ClangBuiltLinux/linux/issues/1699
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 14 Jun 2023 18:04:37 +0000 (11:04 -0700)]
MIPS: Prefer cc-option for additions to cflags
commit
337ff6bb8960fdc128cabd264aaea3d42ca27a32 upstream.
A future change will switch as-option to use KBUILD_AFLAGS instead of
KBUILD_CFLAGS to allow clang to drop -Qunused-arguments, which may cause
issues if the flag being tested requires a flag previously added to
KBUILD_CFLAGS but not KBUILD_AFLAGS. Use cc-option for cflags additions
so that the flags are tested properly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 14 Jun 2023 18:04:36 +0000 (11:04 -0700)]
MIPS: Move '-Wa,-msoft-float' check from as-option to cc-option
This patch is for linux-6.1.y and earlier, it has no direct mainline
equivalent.
In order to backport commit
d5c8d6e0fa61 ("kbuild: Update assembler
calls to use proper flags and language target") to resolve a separate
issue regarding PowerPC, the problem noticed and fixed by
commit
80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT") needs to be addressed. Unfortunately, 6.1 and
earlier do not contain commit
e4412739472b ("Documentation: raise
minimum supported version of binutils to 2.25"), so it cannot be assumed
that all supported versions of GNU as have support for -msoft-float.
In order to switch from KBUILD_CFLAGS to KBUILD_AFLAGS in as-option
without consequence, move the '-Wa,-msoft-float' check to cc-option,
including '$(cflags-y)' directly to avoid the issue mentioned in
commit
80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT").
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nick Desaulniers [Wed, 14 Jun 2023 18:04:35 +0000 (11:04 -0700)]
x86/boot/compressed: prefer cc-option for CFLAGS additions
commit
994f5f7816ff963f49269cfc97f63cb2e4edb84f upstream.
as-option tests new options using KBUILD_CFLAGS, which causes problems
when using as-option to update KBUILD_AFLAGS because many compiler
options are not valid assembler options.
This will be fixed in a follow up patch. Before doing so, move the
assembler test for -Wa,-mrelax-relocations=no from using as-option to
cc-option.
Link: https://lore.kernel.org/llvm/CAK7LNATcHt7GcXZ=jMszyH=+M_LC9Qr6yeAGRCBbE6xriLxtUQ@mail.gmail.com/
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Pearson [Tue, 13 Jun 2023 14:43:00 +0000 (09:43 -0500)]
scsi: target: core: Fix error path in target_setup_session()
commit
91271699228bfc66f1bc8abc0327169dc156d854 upstream.
In the error exits in target_setup_session(), if a branch is taken to
free_sess: transport_free_session() may call to target_free_cmd_counter()
and then fall through to call target_free_cmd_counter() a second time.
This can, and does, sometimes cause seg faults since the data field in
cmd_cnt->refcnt has been freed in the first call.
Fix this problem by simply returning after the call to
transport_free_session(). The second call is redundant for those cases.
Fixes:
4edba7e4a8f3 ("scsi: target: Move cmd counter allocation")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Link: https://lore.kernel.org/r/20230613144259.12890-1-rpearsonhpe@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Wed, 8 Mar 2023 09:23:13 +0000 (11:23 +0200)]
neighbour: delete neigh_lookup_nodev as not used
commit
76b9bf965c98c9b53ef7420b3b11438dbd764f92 upstream.
neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.
Fixes:
1202cdd66531 ("Remove DECnet support from kernel")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Thu, 16 Mar 2023 03:37:53 +0000 (11:37 +0800)]
net/sched: act_api: add specific EXT_WARN_MSG for tc action
commit
2f59823fe696caa844249a90bb3f9aeda69cfe5c upstream.
In my previous commit
0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes:
0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Thu, 16 Mar 2023 03:37:52 +0000 (11:37 +0800)]
Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
commit
8de2bd02439eb839a452a853c1004c2c45ff6fef upstream.
This reverts commit
923b2e30dc9cd05931da0f64e2e23d040865c035.
This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to
TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding
TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in
TCA_ROOT_MAX as Jamal suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pedro Tammela [Fri, 24 Feb 2023 17:56:01 +0000 (14:56 -0300)]
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
commit
923b2e30dc9cd05931da0f64e2e23d040865c035 upstream.
TCA_EXT_WARN_MSG is currently sitting outside of the expected hierarchy
for the tc actions code. It should sit within TCA_ACT_TAB.
Fixes:
0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Zimmermann [Thu, 3 Nov 2022 15:14:27 +0000 (16:14 +0100)]
drm/amdgpu: Don't set struct drm_driver.output_poll_changed
commit
0e3172bac3f43759719384403fe2d1e4c61f87e0 upstream.
Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as amdgpu uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.
v2:
* fix commit description (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-5-tzimmermann@suse.de
Cc: "Gagniuc, Alexandru" <alexandru.gagniuc@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ziwei Dai [Fri, 31 Mar 2023 12:42:09 +0000 (20:42 +0800)]
rcu/kvfree: Avoid freeing new kfree_rcu() memory after old grace period
commit
5da7cb193db32da783a3f3e77d8b639989321d48 upstream.
Memory passed to kvfree_rcu() that is to be freed is tracked by a
per-CPU kfree_rcu_cpu structure, which in turn contains pointers
to kvfree_rcu_bulk_data structures that contain pointers to memory
that has not yet been handed to RCU, along with an kfree_rcu_cpu_work
structure that tracks the memory that has already been handed to RCU.
These structures track three categories of memory: (1) Memory for
kfree(), (2) Memory for kvfree(), and (3) Memory for both that arrived
during an OOM episode. The first two categories are tracked in a
cache-friendly manner involving a dynamically allocated page of pointers
(the aforementioned kvfree_rcu_bulk_data structures), while the third
uses a simple (but decidedly cache-unfriendly) linked list through the
rcu_head structures in each block of memory.
On a given CPU, these three categories are handled as a unit, with that
CPU's kfree_rcu_cpu_work structure having one pointer for each of the
three categories. Clearly, new memory for a given category cannot be
placed in the corresponding kfree_rcu_cpu_work structure until any old
memory has had its grace period elapse and thus has been removed. And
the kfree_rcu_monitor() function does in fact check for this.
Except that the kfree_rcu_monitor() function checks these pointers one
at a time. This means that if the previous kfree_rcu() memory passed
to RCU had only category 1 and the current one has only category 2, the
kfree_rcu_monitor() function will send that current category-2 memory
along immediately. This can result in memory being freed too soon,
that is, out from under unsuspecting RCU readers.
To see this, consider the following sequence of events, in which:
o Task A on CPU 0 calls rcu_read_lock(), then uses "from_cset",
then is preempted.
o CPU 1 calls kfree_rcu(cset, rcu_head) in order to free "from_cset"
after a later grace period. Except that "from_cset" is freed
right after the previous grace period ended, so that "from_cset"
is immediately freed. Task A resumes and references "from_cset"'s
member, after which nothing good happens.
In full detail:
CPU 0 CPU 1
---------------------- ----------------------
count_memcg_event_mm()
|rcu_read_lock() <---
|mem_cgroup_from_task()
|// css_set_ptr is the "from_cset" mentioned on CPU 1
|css_set_ptr = rcu_dereference((task)->cgroups)
|// Hard irq comes, current task is scheduled out.
cgroup_attach_task()
|cgroup_migrate()
|cgroup_migrate_execute()
|css_set_move_task(task, from_cset, to_cset, true)
|cgroup_move_task(task, to_cset)
|rcu_assign_pointer(.., to_cset)
|...
|cgroup_migrate_finish()
|put_css_set_locked(from_cset)
|from_cset->refcount return 0
|kfree_rcu(cset, rcu_head) // free from_cset after new gp
|add_ptr_to_bulk_krc_lock()
|schedule_delayed_work(&krcp->monitor_work, ..)
kfree_rcu_monitor()
|krcp->bulk_head[0]'s work attached to krwp->bulk_head_free[]
|queue_rcu_work(system_wq, &krwp->rcu_work)
|if rwork->rcu.work is not in WORK_STRUCT_PENDING_BIT state,
|call_rcu(&rwork->rcu, rcu_work_rcufn) <--- request new gp
// There is a perious call_rcu(.., rcu_work_rcufn)
// gp end, rcu_work_rcufn() is called.
rcu_work_rcufn()
|__queue_work(.., rwork->wq, &rwork->work);
|kfree_rcu_work()
|krwp->bulk_head_free[0] bulk is freed before new gp end!!!
|The "from_cset" is freed before new gp end.
// the task resumes some time later.
|css_set_ptr->subsys[(subsys_id) <--- Caused kernel crash, because css_set_ptr is freed.
This commit therefore causes kfree_rcu_monitor() to refrain from moving
kfree_rcu() memory to the kfree_rcu_cpu_work structure until the RCU
grace period has completed for all three categories.
v2: Use helper function instead of inserted code block at kfree_rcu_monitor().
Fixes:
34c881745549 ("rcu: Support kfree_bulk() interface in kfree_rcu()")
Fixes:
5f3c8d620447 ("rcu/tree: Maintain separate array for vmalloc ptrs")
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ziwei Dai <ziwei.dai@unisoc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Wed, 14 Jun 2023 22:00:02 +0000 (00:00 +0200)]
parisc: Delete redundant register definitions in <asm/assembly.h>
commit
b5b2a02bcaac7c287694aa0db4837a07bf178626 upstream.
We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.
20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:
arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined
Delete the duplicate definitions in <asm/assembly.h>.
Also delete the definition of gp, which isn't used anywhere.
Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 16 Jun 2023 21:39:39 +0000 (22:39 +0100)]
afs: Fix vlserver probe RTT handling
[ Upstream commit
ba00b190670809c1a89326d80de96d714f6004f2 ]
In the same spirit as commit
ca57f02295f1 ("afs: Fix fileserver probe
RTT handling"), don't rule out using a vlserver just because there
haven't been enough packets yet to calculate a real rtt. Always set the
server's probe rtt from the estimate provided by rxrpc_kernel_get_srtt,
which is capped at 1 second.
This could lead to EDESTADDRREQ errors when accessing a cell for the
first time, even though the vl servers are known and have responded to a
probe.
Fixes:
1d4adfaf6574 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2023-June/006746.html
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Thu, 15 Jun 2023 03:34:00 +0000 (11:34 +0800)]
octeon_ep: Add missing check for ioremap
[ Upstream commit
9a36e2d44d122fe73a2a76ba73f1d50a65cf8210 ]
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().
Fixes:
862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230615033400.2971-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Maftei [Thu, 15 Jun 2023 08:34:04 +0000 (09:34 +0100)]
selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET
[ Upstream commit
76a4c8b82938bc5020b67663db41f451684bf327 ]
Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.
This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.
Fixes:
568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program")
Fixes:
4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility")
Fixes:
6ab0e475f1f3 ("Documentation: fix misc. warnings")
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-starfive.git / log