drm/amd/display: Add Functions to enable Freesync Panel Replay

Add various functions for replay, such as construct, destroy, enable
get_state, and copy_setting etc. These functions communicate with the
firmware to setup and enable panel replay

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable SDMA MGCG for SDMA 5.2.x

Now the SDMA firmware can support SDMA MGCG properly,
so let's enable it from the driver side.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Issue ras enable_feature for gfx ip only

For non-GFX IP blocks, set up ras obj if ras feature
is allowed. For GFX IP blocks, force issue ras
enable_feature command to firmware and only set up ras
obj if ras feature is allowed

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove gfx v11_0_3 ras_late_init call

amdgpu_ras_late_init will invoke ras_late_init call
per IP block

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Clean up style problems in mmhub_v2_3.c

Fixes the following:

ERROR: code indent should use tabs where possible
WARNING: Missing a blank line after declarations
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: suspect code indent for conditional statements (8, 24)
+       if (!(data & (DAGB0_CNTL_MISC2__DISABLE_WRREQ_CG_MASK |
[...]
+                       *flags |= AMD_CG_SUPPORT_MC_MGCG;

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move vram, gtt & flash defines to amdgpu_ ttm & _psp.h

As amdgpu.h is getting decomposed, move vram and gtt extern defines into
amdgpu_ttm.h & flash extern to amdgpu_psp.h

Fixes: f9acfafc3458 ("drm/amdgpu: Move externs to amdgpu.h file from amdgpu_drv.c")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/radeon: Prefer dev_* variant over printk"

Usage of container_of is wrong here.
struct acpi_device *adev = container_of(handle, struct acpi_device, handle)

This reverts commit cbd0606e6a776bf2ba10d4a6957bb7628c0da947.

References: https://gitlab.freedesktop.org/drm/amd/-/issues/2744
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Apply poison mode check to GFX IP only

For GFX IP that only supports poison consumption, GFX
RAS won't be marked as enabled. i.e., hardware doesn't
support gfx sram ecc. But driver still needs to issue
firmware to enable poison consumption mode for GFX IP.
In such case, check poison mode and treat GFX IP as
RAS capable IP block.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Only create err_count sysfs when hw_op is supported

Some IP blocks only support partial ras feature and don't
have ras counter and/or ras error status register at all.
Driver should not create err_count sysfs node for those
IP blocks.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add structs for Freesync Panel Replay

In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system

1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.

2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)
\7f
The concepts of utilizing replay is similar to PSR, but there is a benefit of:
Source and Sink remaining synchronized which allows for
         - lower latency when switching from replay to live frames
        - enable the possibility of more use cases
- easy control of the sink's refresh rate during replay

Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Sort the includes in amdgpu/amdgpu_drv.c

Sort the include files that are included in amdgpu_drv.c alphabetically.

Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Cleanup amdgpu/amdgpu_cgs.c

Fixes the below:

ERROR: switch and case should be at the same indent
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Block comments use * on subsequent lines
WARNING: Comparisons should place the constant on the right side of the test

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix style issues in amdgpu_psp.c

Fixes the following to align to linux coding style:

WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments should align the * on each line

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix style issues in amdgpu_debugfs.c

Fixes the following to align to linux coding style:

WARNING: Missing a blank line after declarations
WARNING: sizeof *rd should be sizeof(*rd)

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix pp_dpm_sclk node not displaying correctly

if GFX clock is in DS (Deep Sleep) state, the current gfx freq may less then dpm
level 0, then pp_dpm_sclk node unable show correct freq.

(align output format with other cards)

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: disable the SMU13 OD feature support temporarily

The existing OD interface cannot support the growing demand for more
OD features. We are in the transition to a new OD mechanism. So,
disable the SMU13 OD feature support temporarily. And this should be
reverted when the new OD mechanism online.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: avoid unmap dma address when svm_ranges are split

DMA address reference within svm_ranges should be unmapped only after
the memory has been released from the system. In case of range
splitting, the DMA address information should be copied to the
corresponding range after this has split. But leaving dma mapping
intact.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the pcie width for smu 13.0.0

correct the pcie width value in pp_dpm_pcie for smu 13.0.0

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't show stack trace for missing eDP

Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary.  Downgrade to debug instead.

Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dceaa51 ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix typo in enable and disable symclk_se

[Why & How]
Symclk should be based on link_enc_inst, and symclk_fe_sel should be based
on stream_enc_inst.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add symclk enable/disable during stream enable/disable

[Why & How]
Using dig_stream_mapper, program symclk_en and symclk_fe_src_sel when
enabling or disabling the corresponding stream.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: add ih 6.1.0 support

Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ih 6.1 support

Add initial support for IH 6.1.

v2: Fix copyright date (Alex)

Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ih 6.1 registers

Add new registers.

v2: updates (Alex)

Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: add smuio 14.0.0 support

Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: add hdp 6.1.0 support

Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Match against exact bootloader status

On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11

For SMU v13.0.4/11, driver does not need to stop RLC for S0i3,
the firmwares will handle that properly.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: enable sdma6 for SDMA 6.1.0

Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Disable S/G for APUs when 64GB or more host memory

Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory.  When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.

Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected.  This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens.  It's a trade-off for now.

Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma6: initialize sdma 6.1.0

Add firmware declaration.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-gt-next-2023-08-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

- Avoid infinite GPU waits by avoidin premature release of request's
  reusable memory (Chris, Janusz)
- Expose RPS thresholds in sysfs (Tvrtko)
- Apply GuC SLPC min frequency softlimit correctly (Vinay)
- Restore SLPC efficient freq earlier (Vinay)
- Consider OA buffer boundary when zeroing out reports (Umesh)
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL (Matt R)
- Fix context workarounds with non-masked regs on MTL/DG2 (Lucas)
- Enable the CCS_FLUSH bit in the pipe control and in the CS for MTL+ (Andi)
- Update MTL workarounds 14018778641, 22016122933 (Tejas, Zhanjun)
- Ensure memory quiesced before AUX CCS invalidation (Jonathan)

- Add a gsc_info debugfs (Daniele)
- Invalidate the TLBs on each GT on multi-GT device (Chris)
- Fix a VMA UAF for multi-gt platform (Nirmoy)
- Do not use stolen on MTL due to HW bug (Nirmoy)
- Check HuC and GuC version compatibility on MTL (Daniele)
- Dump perf_limit_reasons for slow GuC init debug (Vinay)
- Replace kmap() with kmap_local_page() (Sumitra, Ira)
- Add sentinel to xehp_oa_b_counters for KASAN (Andrzej)
- Add the gen12_needs_ccs_aux_inv helper (Andi)
- Fixes and updates for GSC memory allocation (Daniele)
- Fix one wrong caching mode enum usage (Tvrtko)
- Fixes for GSC wakeref (Alan)

- Static checker fixes (Harshit, Arnd, Dan, Cristophe, David, Andi)
- Rename flags with bit_group_X according to the datasheet (Andi)
- Use direct alias for i915 in requests (Andrzej)
- Replace i915->gt0 with to_gt(i915) (Andi)
- Use the i915_vma_flush_writes helper (Tvrtko)
- Selftest improvements (Alan)
- Remove dead code (Tvrtko)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMy6kDd9npweR4uy@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-intel-next-2023-08-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Removing unused declarations (Arnd, Gustavo)
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMv4RCzGyCmG/BDe@intel.com

Merge tag 'drm-misc-next-2023-08-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.6:

UAPI Changes:

 * virtio:
   * Support sync objects

Cross-subsystem Changes:

 * dt-bindings:
   * Move several panel bindings to the correct files

 * fbcon:
   * Cleanups

 * fbdev:
   * Use _IOMEM_, _SYSMEM_, _DMAMEM_ infixes for initializer macros
     and Kconfig tokens, update drivers accordingly
   * ps3fb: Build fix

 * hid/i2c:
   * Allow panels and touchscreens to power sequence together

 * host1x:
   * Fixes

 * video:
   * Fix Kconfig dependencies for boot-up logo

Core Changes:

 * Documentation updates and fixes

 * Fixes

 * MIPI-DBI:
   * Allow using same the D/C GPIO for multiple displays plus
     driver updates

 * Tests:
   * Convert to kunit actions
   * Fix NULL-deref in drm_exec tests

Driver Changes:

 * armada:
   * Fixes

 * ast:
   * Represent BMV as virtual connector
   * Report DP connection status

 * bridge:
   * dw-hdmi: Support CEC suspend/resume
   * Support debugfs for chains
   * Fixes

 * i915:
   * Fixes

 * imx:
   * Convert to dev_error_probe()
   * Cleanups

 * ipu-v3:
   * Convert to devm_platform_ioremap_resource() in several places

 * nouveau:
   * Workaround DPCD issues

 * panel:
   * Convert to of_device_get_match_data()
   * Fix Kconfig dependencies
   * simple: Set bpc value to fix warning; Set connector type for AUO T215HVN01;
     Support Innolux G156HCE-L01 plus DT bindings
   * ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
   * startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
   * sitronix-st7789v: Support Inanbo T28CP45TN89 plus DT bindings;
     Support EDT ET028013DMA plus DT bindings; Various cleanups
   * edp: Add timings for N140HCA-EAC
   * Allow panels and touchscreens to power sequence together
   * Documentation fixes

 * qaic:
   * Cleanups

 * repaper:
   * Fixes

 * ssd130x
   * Fix shadow-plane allocation
   * Cleanups

 * tegra:
   * Convert to devm_platform_ioremap_resource() in several places
   * Support bridge/connector
   * Enable PM
   * Fixes

 * udl:
   * Cleanups

 * v3d:
   * Fixes

 * vc4:
   * Convert tests to kunit actions

 * virtio:
   * Support sync objects

 * vkms:
   * Support gamma LUT
   * Fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmTLwPUACgkQaA3BHVML
# eiNRBwf8CTjJJpSppitI6YEDyjG5JjpJPOrw4gmyjPCLMRhIa+ddtz8c6eiAJQTX
# Q4RWz4LWF0j/aRdXzxbhCJxLmgMoSbcZYN+jDSoaNbX4Fyi1KXw9eum/HZeMODBO
# ScZQFC5iyiCeKHRXZU4+WefqIFTEkEJJll92g3JYlvy793S2TQsA9LB1RIkbwK6x
# 0R+TtKSxAq9Gtwn4H0z4ACIzBTuIACxwNQRd6FTIeT4yrd7t+JY3WiBz9M96S6dK
# npHyjvJ3Brb88rEzv2eZZUey3fxp7sO7U7DruQVOKkgi4FsltPWxs6Ze9iylXQZr
# KcKfW7sxlF2JZlJwT4u0Ur6DMl60eQ==
# =K1nU
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Aug 2023 01:00:05 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803150149.GA16884@linux-uq9g

Merge tag 'drm-next-xilinx-20230802' of git://git./linux/kernel/git/pinchartl/linux into drm-next

Miscellaneous fixes for the Xilinx zynqmp-dpsub driver

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801224454.GB335@pendragon.ideasonboard.com

Merge tag 'amd-drm-next-6.6-2023-07-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.6-2023-07-28:

amdgpu:
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SubVP fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- Add PSP 14.0 support
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes

amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes

radeon:
- Lots of checkpatch cleanups

Merge conflicts:
- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
The switch to drm eu helpers in 8a206685d36f ("drm/amdgpu: use
drm_exec for GEM and CSA handling v2") clashed with the
cosmetic cleanups from 30953c4d000b ("drm/amdgpu: Fix style
issues in amdgpu_gem.c"). I
kept the former since the cleanup up code is gone.
- drivers/gpu/drm/amd/amdgpu/atom.c.
adf64e214280 ("drm/amd: Avoid reading the VBIOS part number
twice") removed code that 992b8fe106ab ("drm/radeon: Replace
all non-returning strlcpy with strscpy") polished.

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230728214228.8102-1-alexander.deucher@amd.com
[sima: some merge conflict wrangling as noted]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

HID: i2c-hid: add more DRM dependencies

When a symbol is selected that has extra dependencies,
anything that selects it must have the same dependencies.
With the added CONFIG_DRM reference from I2C_HID_CORE,
this broke a couple of drivers that now also depend
on DRM:

WARNING: unmet direct dependencies detected for I2C_HID_CORE
  Depends on [m]: HID_SUPPORT [=y] && I2C_HID [=y] && (DRM [=m] || !DRM [=m])
  Selected by [y]:
  - I2C_HID_OF [=y] && HID_SUPPORT [=y] && I2C_HID [=y]
  - I2C_HID_ACPI [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && ACPI [=y]
  - I2C_HID_OF_GOODIX [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && OF [=y]
x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_remove':
(.text+0xfc8826): undefined reference to `drm_panel_remove_follower'
x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_probe':
(.text+0xfc8da0): undefined reference to `drm_is_panel_follower'

Add the corresponding DRM||!DRM dependencies on each one that
is affected.

Fixes: 96a37bfd232ae ("HID: i2c-hid: Support being a panel follower")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802124947.1355415-1-arnd@kernel.org

fbdev/ps3fb: Build without kernel device

Use fb_info() to print status message at the end of the probe function,
which avoids decoding the devices. fb_info() works with or without an
fbdev kernel device. Fixes the following error:

../drivers/video/fbdev/ps3fb.c: In function 'ps3fb_probe':
../drivers/video/fbdev/ps3fb.c:1172:40: error: 'struct fb_info' has no member named 'dev'
 1172 |                  dev_driver_string(info->dev), dev_name(info->dev),
      |                                        ^~
../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap'
  110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
      |                                     ^~~~~~~~~~~
../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info'
 1171 |         dev_info(info->device, "%s %s, using %u KiB of video memory\n",
      |         ^~~~~~~~
../drivers/video/fbdev/ps3fb.c:1172:61: error: 'struct fb_info' has no member named 'dev'
 1172 |                  dev_driver_string(info->dev), dev_name(info->dev),
      |                                                             ^~
../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap'
  110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
      |                                     ^~~~~~~~~~~
../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info'
 1171 |         dev_info(info->device, "%s %s, using %u KiB of video memory\n",
      |         ^~~~~~~~

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/lkml/ccc63065-2976-88ef-1211-731330bf2866@infradead.org/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 701d2054fa31 ("fbdev: Make support for userspace interfaces configurable")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://patchwork.freedesktop.org/patch/msgid/20230731175535.11345-1-tzimmermann@suse.de

drm/doc: document that PRIME import/export is always supported

Since commit 6b85aa68d9d5 ("drm: Enable PRIME import/export for all
drivers"), import/export is always supported. Document this so that
user-space knows what to expect.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712183156.191445-1-contact@emersion.fr

drm/doc: document drm_event and its types

Convert struct drm_event to a kernel doc comment. Link to the
generic DRM event types. Add a basic description of each event
type.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230717093032.600773-1-contact@emersion.fr

drm/doc: add warning about connector_type_id stability

Mention that the connector_type_id is not stable: it depends on
driver and device probe order.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230717131305.616855-1-contact@emersion.fr

drm/doc: use proper cross-references for sections

When I originally wrote these docs, I couldn't manage to insert a
cross-reference to a section. Here's how it can be done.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803095734.386761-1-contact@emersion.fr

fbcon: Make fbcon_registered_fb and fbcon_num_registered_fb static

fbcon_registered_fb and fbcon_num_registered_fb is not referred outside
drivers/video/fbdev/core/fbcon.c, so make them static.

Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803020939.491-1-guozihua@huawei.com

drm/drm_plane.h: fix grammar of the comment

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230409131547.494128-1-15330273260@189.cn
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

dt-bindings: display: bridge: tc358867: Add interrupt property

This bridge has an interrupt line for event signaling. Add the
corresponding property.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718084411.1189831-1-alexander.stein@ew.tq-group.com

drm: bridge: dw_hdmi: Add cec suspend/resume functions

CEC interrupt status/mask and logical address registers
will be reset when device enter suspend.
It will cause cec fail to work after device resume.
Add CEC suspend/resume functions, reinitialize logical address registers
and restore interrupt status/mask registers after resume.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721124415.1513223-1-Sandor.yu@nxp.com

drm/panel-simple: Add Innolux G156HCE-L01 panel entry

Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-2-marex@denx.de

dt-bindings: display: simple: Add Innolux G156HCE-L01 panel

Add entry for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-1-marex@denx.de

drm/panel: Fix todo indentation for panel prepared/enabled cleanup

In commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled
in drm_panel") the formatting for a code block was not quite
right. This caused an error when building htmldocs:

  Documentation/gpu/todo.rst:469: ERROR: Unexpected indentation.

Fix the error by using the proper syntax for a code block.

Fixes: d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20230802141724.0edce253@canb.auug.org.au
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802074727.2.Iaeb7b0f7951aee6b8c090364bbc87b1ae198a857@changeid

drm/panel: Fix kernel-doc typo for `follower_lock`

In the kernel doc for the `follower_lock` member of `struct drm_panel`
there was a typo where it was called `followers_lock`. This resulted
in a warning when making "htmldocs":

  ./include/drm/drm_panel.h:270: warning:
  Function parameter or member 'follower_lock' not described in 'drm_panel'

Fix the typo.

Fixes: de0874165b83 ("drm/panel: Add a way for other devices to follow panel state")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20230802142136.0f67b762@canb.auug.org.au
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802074727.1.I4036706ad5e7f45e80d41b777164258e52079cd8@changeid

drm/i915/guc/slpc: Restore efficient freq earlier

This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.

Specifically, this scenario-

- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn

This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.

v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf23 ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com

accel/qaic: remove redundant pointer pexec

Pointer pexec is being assigned a value however it is never read. The
assignment is redundant and can be removed. Replace sizeof(*pexec)
with sizeof the type and remove the declaration of pointer pexec.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726140626.264952-1-colin.i.king@gmail.com

drm/i915: Remove unnecessary include

The inclusion of intel_gt_defines.h was initially added to
i915_drv.h to provide the definition of I915_MAX_GT, where it was
originally defined.

However, since I915_MAX_GT is now included in
i915_gem_object_types.h, it sis no longer required in i915_drv.h.

Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-5-andi.shyti@linux.intel.com

drm/i915: Invalidate the TLBs on each GT

With multi-GT devices, the object may have been bound on each GT.
Invalidate the TLBs across all GT before releasing the pages
back to the system.

Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-4-andi.shyti@linux.intel.com

i915/drm/gt: Move the gt defines in the gt directory

Create a new intel_gt_defines.h inside the gt/ directory as a
placeholder for all the generic GT based defines.

As of now place only I915_MAX_GT.

Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-3-andi.shyti@linux.intel.com

drm/i915/gt: Move TLB invalidation to its own file

Prepare for supporting more TLB invalidation scenarios by moving
the current MMIO invalidation to its own file.

Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-2-andi.shyti@linux.intel.com

drm/tiny: panel-mipi-dbi: Allow sharing the D/C GPIO

Displays that are connected to the same SPI bus may share the D/C GPIO.
Use GPIOD_FLAGS_BIT_NONEXCLUSIVE to allow access to the same GPIO for
multiple panel-mipi-dbi instances. Exclusive access to the GPIO during
transfers is ensured by the locking in drm_mipi_dbi.c.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-3-otto.pflueger@abscue.de

drm/mipi-dbi: Lock SPI bus before setting D/C GPIO

Multiple displays may be connected to the same bus and share a D/C GPIO,
so the display driver needs exclusive access to the bus to ensure that
it can control the D/C GPIO safely.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-2-otto.pflueger@abscue.de

drm/bridge: Add debugfs print for bridge chains

DRM bridges are not visible to the userspace and it may not be
immediately clear if the chain is somehow constructed incorrectly. I
have had two separate instances of a bridge driver failing to do a
drm_bridge_attach() call, resulting in the bridge connector not being
part of the chain. In some situations this doesn't seem to cause issues,
but it will if DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is used.

Add a debugfs file to print the bridge chains. For me, on this TI AM62
based platform, I get the following output:

encoder[39]
bridge[0] type: 0, ops: 0x0
bridge[1] type: 0, ops: 0x0, OF: /bus@f0000/i2c@20000000/dsi@e:toshiba,tc358778
bridge[2] type: 0, ops: 0x3, OF: /bus@f0000/i2c@20010000/hdmi@48:lontium,lt8912b
bridge[3] type: 11, ops: 0x7, OF: /hdmi-connector:hdmi-connector

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802-drm-bridge-chain-debugfs-v4-1-7e3ae3d137c0@ideasonboard.com

drm: xlnx: zynqmp_dpsub: Use devm_platform_ioremap_resource_byname()

Convert platform_get_resource_byname() + devm_ioremap_resource() to a
single call to devm_platform_ioremap_resource_byname(), as this is
exactly what this function does.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Use dev_err_probe instead of dev_err

It is possible that dma_request_chan() returns EPROBE_DEFER, in which
case the driver defers probing without printing any message. Use
dev_err_probe() to record the probe deferral cause and ease debugging.

Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm: xlnx: zynqmp_dpsub: Add missing check for dma_set_mask

Add check for dma_set_mask() and return the error if it fails.

Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/xlnx/zynqmp_dp: Fix function name zynqmp_dp_link_train() -> zynqmp_dp_train()

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/xlnx/zynqmp_dp.c:793: warning: expecting prototype for zynqmp_dp_link_train(). Prototype was for zynqmp_dp_train() instead

Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/i915/uncore: fix race around i915->params.mmio_debug

Only check the conditions for unclaimed reg debug once to avoid locking
problems when i915->params.mmio_debug changes between header and footer.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8749
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a53fb0fd84c4627398ccd4304b35db05603b89b6.1690886109.git.jani.nikula@intel.com

drm/i915/uncore: split unclaimed_reg_debug() to header and footer

Make it easier to have different logic for the two for follow-up.

Cc: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a0a93f08314f8d7e222a907d9aa5e0b89cb969e.1690886109.git.jani.nikula@intel.com

HID: i2c-hid: Do panel follower work on the system_wq

Turning on an i2c-hid device can be a slow process. This is why
i2c-hid devices use PROBE_PREFER_ASYNCHRONOUS. Unfortunately, when
we're a panel follower the i2c-hid power up sequence now blocks the
power on of the panel. Let's fix that by scheduling the work on the
system_wq.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.10.I962bb462ede779005341c49320740ed95810021d@changeid

HID: i2c-hid: Support being a panel follower

As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), we really want to keep the power states of a
touchscreen and the panel it's attached to in sync with each other. In
that spirit, add support to i2c-hid to be a panel follower. This will
let the i2c-hid driver get informed when the panel is powered on and
off. From there we can match the i2c-hid device's power state to that
of the panel.

NOTE: this patch specifically _doesn't_ use pm_runtime to keep track
of / manage the power state of the i2c-hid device, even though my
first instinct said that would be the way to go. Specific problems
with using pm_runtime():
* The initial power up couldn't happen in a runtime resume function
  since it create sub-devices and, apparently, that's not good to do
  in your resume function.
* Managing our power state with pm_runtime meant fighting to make the
  right thing happen at system suspend to prevent the system from
  trying to resume us only to suspend us again. While this might be
  able to be solved, it added complexity.
Overall the code without pm_runtime() ended up being smaller and
easier to understand.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.9.Ib1a98309c455cd7e26b931c69993d4fba33bbe15@changeid

HID: i2c-hid: Suspend i2c-hid devices in remove

In the i2c-hid remove() function we currently try to power off,
depopulate our child device, and free our resources. That's OK, but...

* If the i2c-hid device is on a power rail that can't turn off (either
  an always-on or a shared power rail) we won't try to put the device
  in a low power state during remove(). This probably doesn't matter
  for very many devices but it could be nice in some instances.

* If the i2c-hid device somehow manages to generate an interrupt after
  we tried to power off it is conceivable that the interrupt could
  arrive during or after the call to hid_destroy_device() but before
  the call to free_irq(). That could cause a crash since our IRQ
  handler isn't expecting it. One could imagine this happening in
  the case where we couldn't turn off (see the previous bullet) or,
  possibly, if the interrupt line could glitch shortly after the
  device powered off.

Let's call the suspend code during remove to avoid these issues. That
will put the device into a low power state and also disable
interrupts.

Technically, one could consider this a "fix" of commit 4a200c3b9a40
("HID: i2c-hid: introduce HID over i2c specification implementation").
However, since the above bullet points are more theoretical than
problems seen on real systems and since the remove() of an i2c-hid
touchscreen isn't terribly likely to be called in production, it's
probably not worth the bother of trying to backport it.

Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.8.Ic3ecad4a825905f4e4ce2a772b17f3c9cb2d60a2@changeid

HID: i2c-hid: Make suspend and resume into helper functions

In a future patch we'd like to be able to call the current i2c-hid
suspend and resume functions from times other than system
suspend. Move the functions higher up in the file and have them take a
"struct i2c_hid" to make this simpler. We'll then add tiny wrappers of
the functions for use with system suspend.

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.7.I5c9894789b8b02f029bf266ae9b4f43c7907a173@changeid

HID: i2c-hid: Rearrange probe() to power things up later

In a future patch, we want to change i2c-hid not to necessarily power
up the touchscreen during probe. In preparation for that, rearrange
the probe function so that we put as much stuff _before_ powering up
the device as possible.

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.6.Ifcc9b0a44895d164788966f9b9511fe094ca8cf9@changeid

HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS()

The SYSTEM_SLEEP_PM_OPS() allows us to get rid of '#ifdef
CONFIG_PM_SLEEP', as talked about in commit 1a3c7bb08826 ("PM: core:
Add new *_PM_OPS macros, deprecate old ones").

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.5.Ib2a2865bd3c0b068432259dfc7d76cebcbb512be@changeid

of: property: fw_devlink: Add a devlink for panel followers

Inform fw_devlink of the fact that a panel follower (like a
touchscreen) is effectively a consumer of the panel from the purposes
of fw_devlink.

NOTE: this patch isn't required for correctness but instead optimizes
probe order / helps avoid deferrals.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.4.Ibf8e1342b5b7906279db2365aca45e6253857bb3@changeid

drm/panel: Add a way for other devices to follow panel state

These days, it's fairly common to see panels that have touchscreens
attached to them. The panel and the touchscreen can somewhat be
thought of as totally separate devices and, historically, this is how
Linux has treated them. However, treating them as separate isn't
necessarily the best way to model the two devices, it was just that
there was no better way. Specifically, there is little practical
reason to have the touchscreen powered on when the panel is turned
off, but if we model the devices separately we have no way to keep the
two devices' power states in sync with each other.

The issue described above makes it sound as if the problem here is
just about efficiency. We're wasting power keeping the touchscreen
powered up when the screen is off. While that's true, the problem can
go deeper. Specifically, hardware designers see that there's no reason
to have the touchscreen on while the screen is off and then build
hardware assuming that software would never turn the touchscreen on
while the screen is off.

In the very simplest case of hardware designs like this, the
touchscreen and the panel share some power rails. In most cases, this
turns out not to be terrible and is, again, just a little less
efficient. Specifically if we tell Linux that the touchscreen and the
panel are using the same rails then Linux will keep the rails on when
_either_ device is turned on. That ends to work OK-ish, but now if you
turn the panel off not only will the touchscreen remain powered, but
the power rails for the panel itself won't be switched off, burning
extra power.

The above two inefficiencies are _extra_ minor when you consider the
fact that laptops rarely spend much time with the screen off. The main
use case would be when an external screen (and presumably a power
supply) is attached.

Unfortunately, it gets worse from here. On sc7180-trogdor-homestar,
for instance, the display's TCON (timing controller) sometimes crashes
if you don't power cycle it whenever you stop and restart the video
stream (like during a modeset). The touchscreen keeping the power
rails on causes real problems. One proposal in the homestar timeframe
was to move the touchscreen to an always-on rail, dedicating the main
power rail to the panel. That caused _different_ problems as talked
about in commit 557e05fa9fdd ("HID: i2c-hid: goodix: Stop tying the
reset line to the regulator"). The end result of all of this was to
add an extra regulator to the board, increasing cost.

Recently, Cong Yang posted a patch [1] where things are even worse.
The panel and touch controller on that system seem even more
intimately tied together and really can't be thought of separately.

To address this issue, let's start allowing devices to register
themselves as "panel followers". These devices will get called after a
panel has been powered on and before a panel is powered off. This
makes the panel the primary device in charge of the power state, which
matches how userspace uses it.

The panel follower API should be fairly straightforward to use. The
current code assumes that panel followers are using device tree and
have a "panel" property pointing to the panel to follow. More
flexibility and non-DT implementations could be added as needed.

Right now, panel followers can follow the prepare/unprepare functions.
There could be arguments made that, instead, they should follow
enable/disable. I've chosen prepare/unprepare for now since those
functions are guaranteed to power up/power down the panel and it seems
better to start the process earlier.

A bit of explaining about why this is a roll-your-own API instead of
using something more standard:
1. In standard APIs in Linux, parent devices are automatically powered
   on when a child needs power. Applying that here, it would mean that
   we'd force the panel on any time someone was listening to the
   touchscreen. That, unfortunately, would have broken homestar's need
   (if we hadn't changed the hardware, as per above) where the panel
   absolutely needs to be able to power cycle itself. While one could
   argue that homestar is broken hardware and we shouldn't have the
   API do backflips for it, _officially_ the eDP timing guidelines
   agree with homestar's needs and the panel power sequencing diagrams
   show power going off. It's nice to be able to support this.
2. We could, conceibably, try to add a new flag to device_link causing
   the parent to be in charge of power. Then we could at least use
   normal pm_runtime APIs. This sounds great, except that we run into
   problems with initial probe. As talked about in the later patch
   ("HID: i2c-hid: Support being a panel follower") the initial power
   on of a panel follower might need to do things (like add
   sub-devices) that aren't allowed in a runtime_resume function.

The above complexities explain why this API isn't using common
functions. That being said, this patch is very small and
self-contained, so if someone was later able to adapt it to using more
common APIs while solving the above issues then that could happen in
the future.

[1] https://lore.kernel.org/r/20230519032316.3464732-1-yangcong5@huaqin.corp-partner.google.com

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.3.Icd5f96342d2242051c754364f4bee13ef2b986d4@changeid

drm/panel: Check for already prepared/enabled in drm_panel

In a whole pile of panel drivers, we have code to make the
prepare/unprepare/enable/disable callbacks behave as no-ops if they've
already been called. It's silly to have this code duplicated
everywhere. Add it to the core instead so that we can eventually
delete it from all the drivers. Note: to get some idea of the
duplicated code, try:
  git grep 'if.*>prepared' -- drivers/gpu/drm/panel
  git grep 'if.*>enabled' -- drivers/gpu/drm/panel

NOTE: arguably, the right thing to do here is actually to skip this
patch and simply remove all the extra checks from the individual
drivers. Perhaps the checks were needed at some point in time in the
past but maybe they no longer are? Certainly as we continue
transitioning over to "panel_bridge" then we expect there to be much
less variety in how these calls are made. When we're called as part of
the bridge chain, things should be pretty simple. In fact, there was
some discussion in the past about these checks [1], including a
discussion about whether the checks were needed and whether the calls
ought to be refcounted. At the time, I decided not to mess with it
because it felt too risky.

Looking closer at it now, I'm fairly certain that nothing in the
existing codebase is expecting these calls to be refcounted. The only
real question is whether someone is already doing something to ensure
prepare()/unprepare() match and enabled()/disable() match. I would say
that, even if there is something else ensuring that things match,
there's enough complexity that adding an extra bool and an extra
double-check here is a good idea. Let's add a drm_warn() to let people
know that it's considered a minor error to take advantage of
drm_panel's double-checking but we'll still make things work fine.

We'll also add an entry to the official DRM todo list to remove the
now pointless check from the panels after this patch lands and,
eventually, fixup anyone who is triggering the new warning.

[1] https://lore.kernel.org/r/20210416153909.v4.27.I502f2a92ddd36c3d28d014dd75e170c2d405a0a5@changeid

Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.2.I59b417d4c29151cc2eff053369ec4822b606f375@changeid

dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed touchscreens

As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), touchscreens that are connected to panels are
generally expected to be power sequenced together with the panel
they're attached to. Today, nothing provides information allowing you
to find out that a touchscreen is connected to a panel. Let's add a
phandle for this.

The proerty is added to the generic touchscreen bindings and then
enabled in the bindings for the i2c-hid backed devices. This can and
should be added for other touchscreens in the future, but for now
let's start small.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.1.Id68e30343bb1e11470582a9078b086176cfec46b@changeid

drm/panel-edp: Add enable timings for N140HCA-EAC panel

Add timings for InnoLux N140HCA-EAC. This panel is found on some laptops
such as Acer Aspire 1.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801-aspire1-cmn-panel-v1-1-c3d88e389805@trvn.ru

drm/panel: sitronix-st7789v: Check display ID

A very basic debugging rule when a device is connected for the first
time is to access a read-only register which contains known data in
order to ensure the communication protocol is properly working. This
driver lacked any read helper which is often a critical piece for
speeding-up bring-ups.

Add a read helper and use it to verify the communication with the panel
is working as soon as possible in order to inform the user early if this
is not the case.

As this panel may work with no MISO line, the check is discarded in this
case. Upon error, we do not fail probing but just warn the user, in case
the DT description would be lacking the Rx bus width (which is likely on
old descriptions) in order to avoid breaking existing devices.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org> # no MISO line
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-20-sre@kernel.org

drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support

This panel from Emerging Display Technologies Corporation features an
ST7789V2 LCD controller panel inside which is almost identical to what
the Sitronix panel driver supports.

In practice, the module physical size is specific, and experiments show
that the display will malfunction if any of the following situation
occurs:
* Pixel clock is above 3MHz
* Pixel clock is not inverted
I could not properly identify the reasons behind these failures, scope
captures show valid input signals.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-19-sre@kernel.org

drm/panel: sitronix-st7789v: Clarify a definition

The Sitronix datasheet explains BIT(1) of the RGBCTRL register as the
DOTCLK/PCLK edge used to sample the data lines:

    “0” The data is input on the positive edge of DOTCLK
    “1” The data is input on the negative edge of DOTCLK

IOW, this bit implies a falling edge and not a high state. Correct the
definition to ease the comparison with the datasheet.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-18-sre@kernel.org

drm/panel: sitronix-st7789v: Use 9 bits per spi word by default

The Sitronix controller expects 9-bit words, provide this as default at
probe time rather than specifying this in each and every access.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-17-sre@kernel.org

dt-bindings: display: st7789v: bound the number of Rx data lines

The ST7789V LCD controller supports regular SPI wiring, as well as no Rx
data line at all. The operating system needs to know whether it can read
registers from the device or not. Let's detail this specific design
possibility by bounding the spi-rx-bus-width property.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-16-sre@kernel.org

dt-bindings: display: st7789v: Add the edt,et028013dma panel compatible

The ST7789V LCD controller is also embedded in the ET028013DMA
panel. Add a compatible string to describe this other panel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-15-sre@kernel.org

drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support

UNI-T UTi260b has a Inanbo T28CP45TN89 v17 panel. I could not find
proper documentation for the panel apart from a technical drawing, but
according to the vendor U-Boot it is based on a Sitronix st7789v chip.
I generated the init sequence by modifying the default one until proper
graphics output has been seen on the device.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-14-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding polarity info

Add polarity information via mode and bus flags, so that they are no
longer hardcoded and forward the information to the DRM stack. This is
required for adding panels with different settings.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-13-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding invert mode

While the default panel uses invert mode, some panels
require non-invert mode instead.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-12-sre@kernel.org

drm/panel: sitronix-st7789v: add media bus format

Add support for describing the media bus format in the
panel configuration and expose that to userspace. Since
both supported formats (RGB565 and RGB666) are using 6
bits per color also hardcode that information.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-11-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding panel size

Move the panel size information to the mode struct, so
that different panel sizes can be specified depending
on the panel type.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-10-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding mode info

Avoid hard-coding the default_mode and supply it from match data. One
additional layer of abstraction has been introduced, which will be
needed for specifying other panel information (e.g. bus flags) in the
next steps.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-9-sre@kernel.org

drm/panel: sitronix-st7789v: improve error handling

Improve error handling in the probe routine, so that probe
defer errors are captured in /sys/kernel/debug/devices_deferred

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-8-sre@kernel.org

drm/panel: sitronix-st7789v: simplify st7789v_spi_write

st7789v_spi_write initializes a message with just
a single transfer, spi_sync_transfer can be used
for that.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-7-sre@kernel.org

drm/panel: sitronix-st7789v: make reset GPIO optional

The reset pin might not be software controllable from the SoC,
so make it optional.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-6-sre@kernel.org

drm/panel: sitronix-st7789v: remove unused constants

ST7789V_COLMOD_RGB_FMT_18BITS and ST7789V_COLMOD_CTRL_FMT_18BITS
are unused in favour of MIPI_DCS_PIXEL_FMT_18BIT, remove them.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-5-sre@kernel.org

drm/panel: sitronix-st7789v: add SPI ID table

SPI device drivers should also have a SPI ID table.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-4-sre@kernel.org

dt-bindings: display: st7789v: add Inanbo T28CP45TN89

Add compatible value for Inanbo t28cp45tn89 and make reset GPIO non
mandatory, since it might not be connected to the CPU.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-3-sre@kernel.org

dt-bindings: vendor-prefixes: add Inanbo

Shenzhen INANBO Electronic Technology Co., Ltd. manufacturers TFT/OLED
LCD panels.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-2-sre@kernel.org

drm/tests: Alloc drm_device on drm_exec tests

The drm_exec tests where crashing[0] because of a null dereference. This
is caused by a new access of the `driver` attribute of `struct
drm_driver` on drm_gem_private_object_init(). Alloc the drm_device to
fix that.

[0]
[15:05:24] ================== drm_exec (6 subtests) ===================
[15:05:24] [PASSED] sanitycheck
^CERROR:root:Build interruption occurred. Cleaning console.
[15:05:50] [ERROR] Test: drm_exec: missing expected subtest!
[15:05:50] BUG: kernel NULL pointer dereference, address: 00000000000000b0
[15:05:50] #PF: supervisor read access in kernel mode
[15:05:50] #PF: error_code(0x0000) - not-present page
[15:05:50] PGD 0 P4D 0
[15:05:50] Oops: 0000 [#1] PREEMPT NOPTI
[15:05:50] CPU: 0 PID: 23 Comm: kunit_try_catch Tainted: G                 N 6.4.0-rc7-02032-ge6303f323b1a #69
[15:05:50] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
[15:05:50] RIP: 0010:drm_gem_private_object_init+0x60/0xc0

Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings")
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731182241.240556-1-arthurgrillo@riseup.net

drm/i915: Add function to clear scanout flag for vmas

Currently frontbuffer tracking code is directly iterating over object vmas
and clearing scanout flags for them. Add function to clear scanout flag for
vmas and use it from frontbuffer tracking code.

v2: describe function parameter.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727064142.751976-5-jouni.hogander@intel.com

drm/i915/display: Remove i915_gem_object_types.h from intel_frontbuffer.h

Now as we have removed all the references to internals of i915_gem_object
from the frontbuffer header we can also remove including
i915_gem_object_types.h.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727064142.751976-4-jouni.hogander@intel.com

drm/i915: Add getter/setter for i915_gem_object->frontbuffer

Add getter/setter for i915_gem_object->frontbuffer and use it instead of
directly touching i915_gem_object->frontbuffer frontbuffer pointer.

v3:
 - Fix intel_frontbuffer_get return value
 - s/front_ret/cur/
v2: Move getter/setter into i915_gem_object.h

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727064142.751976-3-jouni.hogander@intel.com

drm/i915: Add macros to get i915 device from i915_gem_object

We want to stop touching directly i915_gem_object struct members in
intel_frontbuffer code. As a part of this we add helper macro to get i915
device from i915_gem_object.

v2: operate on and return pointer in defined macros

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727064142.751976-2-jouni.hogander@intel.com