ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD

commit 28187dc8ebd938d574edfc6d9e0f9c51c21ff3f4 upstream.

LLD does not yet support any big endian architectures. Make this config
non-selectable when using LLD until LLD is fixed.

Link: https://github.com/ClangBuiltLinux/linux/issues/965
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86/setup: don't remove E820_TYPE_RAM for pfn 0"

commit 5c279c4cf206e03995e04fd3404fa95ffd243a97 upstream.

This reverts commit bde9cfa3afe4324ec251e4af80ebf9b7afaf7afe.

Changing the first memory page type from E820_TYPE_RESERVED to
E820_TYPE_RAM makes it a part of "System RAM" resource rather than a
reserved resource and this in turn causes devmem_is_allowed() to treat
is as area that can be accessed but it is filled with zeroes instead of
the actual data as previously.

The change in /dev/mem output causes lilo to fail as was reported at
slakware users forum, and probably other legacy applications will
experience similar problems.

Link: https://www.linuxquestions.org/questions/slackware-14/slackware-current-lilo-vesa-warnings-after-recent-updates-4175689617/#post6214439
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Do not pass tagged addresses to __is_lm_address()

commit 91cb2c8b072e00632adf463b78b44f123d46a0fa upstream.

Commit 519ea6f1c82f ("arm64: Fix kernel address detection of
__is_lm_address()") fixed the incorrect validation of addresses below
PAGE_OFFSET. However, it no longer allowed tagged addresses to be passed
to virt_addr_valid().

Fix this by explicitly resetting the pointer tag prior to invoking
__is_lm_address(). This is consistent with the __lm_to_phys() macro.

Fixes: 519ea6f1c82f ("arm64: Fix kernel address detection of __is_lm_address()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210201190634.22942-2-catalin.marinas@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Fix kernel address detection of __is_lm_address()

commit 519ea6f1c82fcdc9842908155ae379de47818778 upstream.

Currently, the __is_lm_address() check just masks out the top 12 bits
of the address, but if they are 0, it still yields a true result.
This has as a side effect that virt_addr_valid() returns true even for
invalid virtual addresses (e.g. 0x0).

Fix the detection checking that it's actually a kernel address starting
at PAGE_OFFSET.

Fixes: 68dd8ef32162 ("arm64: memory: Fix virt_addr_valid() using __is_lm_address()")
Cc: <stable@vger.kernel.org> # 5.4.x
Cc: Will Deacon <will@kernel.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210126134056.45747-1-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: meson: Describe G12b GPU as coherent

commit 03544505cb10ddc73df3b6176e71cdb366834134 upstream.

According to a downstream commit I found in the Khadas vendor kernel,
the GPU on G12b is wired up for ACE-lite, so (now that Panfrost knows
how to handle this properly) we should describe it as such. Otherwise
the mismatch leads to all manner of fun with mismatched attributes and
inadvertently snooping stale data from caches, which would account for
at least some of the brokenness observed on this platform.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/765446e529e50b304af63432da7836c4d31eb8d4.1600780574.git.robin.murphy@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Support cache-coherent integrations

commit 268af50f38b1f2199a2e85e38073d7a25c20190c upstream.

When the GPU's ACE-Lite interface is fully wired up and capable of
snooping CPU caches, it may be described as "dma-coherent" in
devicetree, which will already inform the DMA layer not to perform
unnecessary cache maintenance. However, we still need to ensure that
the GPU uses the appropriate cacheable outer-shareable attributes in
order to generate the requisite snoop signals, and that CPU mappings
don't create a mismatch by using a non-cacheable type either.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7024ce18c1cb1a226e918037d49175571db0b436.1600780574.git.robin.murphy@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/io-pgtable-arm: Support coherency for Mali LPAE

commit 728da60da7c1ec1e21ae64648e376666de3c279c upstream.

Midgard GPUs have ACE-Lite master interfaces which allows systems to
integrate them in an I/O-coherent manner. It seems that from the GPU's
viewpoint, the rest of the system is its outer shareable domain, and so
even when snoop signals are wired up, they are only emitted for outer
shareable accesses. As such, setting the TTBR_SHARE_OUTER bit does
indeed get coherent pagetable walks working nicely for the coherent
T620 in the Arm Juno SoC.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8df778355378127ea7eccc9521d6427e3e48d4f2.1600780574.git.robin.murphy@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: Ensure that CRQ entry read are correctly ordered

commit e41aec79e62fa50f940cf222d1e9577f14e149dc upstream.

Ensure that received Command-Response Queue (CRQ) entries are
properly read in order by the driver. dma_rmb barrier has
been added before accessing the CRQ descriptor to ensure
the entire descriptor is read before processing.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP

commit 20776b465c0c249f5e5b5b4fe077cd24ef1cda86 upstream.

It's not true that switchdev_port_obj_notify() only inspects the
->handled field of "struct switchdev_notifier_port_obj_info" if
call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON()
triggering for a non-zero return combined with ->handled not being
true. But the real problem here is that -EOPNOTSUPP is not being
properly handled.

The wrapper functions switchdev_handle_port_obj_add() et al change a
return value of -EOPNOTSUPP to 0, and the treatment of ->handled in
switchdev_port_obj_notify() seems to be designed to change that back
to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e.,
everybody returned -EOPNOTSUPP).

Currently, as soon as some device down the stack passes the check_cb()
check, ->handled gets set to true, which means that
switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP.

This, for example, means that the detection of hardware offload
support in the MRP code is broken: switchdev_port_obj_add() used by
br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP
code thinks the generation of MRP test frames has been offloaded, no
such frames are actually put on the wire. Similarly,
br_mrp_switchdev_set_ring_role() also always returns 0, causing
mrp->ring_role_offloaded to be set to 1.

To fix this, continue to set ->handled true if any callback returns
success or any error distinct from -EOPNOTSUPP. But if all the
callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so
the logic in switchdev_port_obj_notify() can propagate that
information.

Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: put device node before return

commit cf3c46631e1637582f517a574c77cd6c05793817 upstream.

Put the device node dn before return error code on failure path.

Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum_span: Do not overwrite policer configuration

commit b6f6881aaf2344bf35a4221810737abe5fd210af upstream.

The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.

SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.

This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.

Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing

commit 7cfc4486e7ea25bd405df162d9c131ee5d4c6c93 upstream.

Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.

[   25.535095] ------------[ cut here ]------------
[   25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[   25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[   25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[   25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.11.0-rc4-intel-lts-MISMAIL5+ #5
[   25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[   25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[   25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[   25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[   25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[   25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[   25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[   25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[   25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[   25.731425] FS:  0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[   25.740481] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[   25.754900] Call Trace:
[   25.757631]  <IRQ>
[   25.759891]  ? qdisc_put_unlocked+0x30/0x30
[   25.764565]  ? qdisc_put_unlocked+0x30/0x30
[   25.769245]  call_timer_fn+0x2e/0x140
[   25.773346]  run_timer_softirq+0x1f3/0x430
[   25.777932]  ? __hrtimer_run_queues+0x12c/0x2c0
[   25.783005]  ? ktime_get+0x3e/0xa0
[   25.786812]  __do_softirq+0xa6/0x2ef
[   25.790816]  asm_call_irq_on_stack+0xf/0x20
[   25.795501]  </IRQ>
[   25.797852]  do_softirq_own_stack+0x5d/0x80
[   25.802538]  irq_exit_rcu+0x94/0xb0
[   25.806475]  sysvec_apic_timer_interrupt+0x42/0xc0
[   25.811836]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[   25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[   25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[   25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[   25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[   25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[   25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[   25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[   25.889918]  cpuidle_enter+0x29/0x40
[   25.893922]  do_idle+0x24a/0x290
[   25.897536]  cpu_startup_entry+0x19/0x20
[   25.901930]  start_secondary+0x128/0x160
[   25.906326]  secondary_startup_64_no_verify+0xb0/0xbb
[   25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[   25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.

Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: octeontx2: Make sure the buffer is 128 byte aligned

commit db2805150a0f27c00ad286a29109397a7723adad upstream.

The octeontx2 hardware needs the buffer to be 128 byte aligned.
But in the current implementation of napi_alloc_frag(), it can't
guarantee the return address is 128 byte aligned even the request size
is a multiple of 128 bytes, so we have to request an extra 128 bytes and
use the PTR_ALIGN() to make sure that the buffer is aligned correctly.

Fixes: 7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers")
Reported-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: put child node on error path

commit 0607a2cddb60f4548b55e28ac56a8d73493a45bb upstream.

Also decrement the reference count of child device on error path.

Fixes: 3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-intel-plat: remove config data on error

commit 3765d86ffcd346913c372d69cdc05dc8d56119ac upstream.

Remove the config data when rate setting fails.

Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: microchip: Adjust reset release timing to match reference reset circuit

commit 1c45ba93d34cd6af75228f34d0675200c81738b5 upstream.

KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended
circuit for interfacing with CPU/FPGA reset consisting of 10k pullup
resistor and 10uF capacitor to ground. This circuit takes ~100 ms to
rise enough to release the reset.

For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is
                    VDDIO - VIH
  t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s
                       VDDIO
so we need ~95 ms for the reset to really de-assert, and then the
original 100us for the switch itself to come out of reset. Simply
msleep() for 100 ms which fits the constraint with a bit of extra
space.

Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset timing")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.13

Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210202132957.692094111@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: fix the race conditions in multi-transport support

commit c518adafa39f37858697ac9309c6cf1805581446 upstream.

There are multiple similar bugs implicitly introduced by the
commit c0cfa2d8a788fcf4 ("vsock: add multi-transports support") and
commit 6a2c0962105ae8ce ("vsock: prevent transport modules unloading").

The bug pattern:
 [1] vsock_sock.transport pointer is copied to a local variable,
 [2] lock_sock() is called,
 [3] the local variable is used.
VSOCK multi-transport support introduced the race condition:
vsock_sock.transport value may change between [1] and [2].

Let's copy vsock_sock.transport pointer to local variables after
the lock_sock() call.

Fixes: c0cfa2d8a788fcf4 ("vsock: add multi-transports support")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN

commit 62d9f1a6945ba69c125e548e72a36d203b30596e upstream.

Upon receiving a cumulative ACK that changes the congestion state from
Disorder to Open, the TLP timer is not set. If the sender is app-limited,
it can only wait for the RTO timer to expire and retransmit.

The reason for this is that the TLP timer is set before the congestion
state changes in tcp_ack(), so we delay the time point of calling
tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and
remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer
is set.

This commit has two additional benefits:
1) Make sure to reset RTO according to RFC6298 when receiving ACK, to
avoid spurious RTO caused by RTO timer early expires.
2) Reduce the xmit timer reschedule once per ACK when the RACK reorder
timer is set.

Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: make TCP_USER_TIMEOUT accurate for zero window probes

commit 344db93ae3ee69fc137bd6ed89a8ff1bf5b0db08 upstream.

The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the
timer has backoff with a max interval of about two minutes, the
actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes.

In this patch the TCP_USER_TIMEOUT is made more accurate by taking it
into account when computing the timer value for the 0-window probes.

This patch is similar to and builds on top of the one that made
TCP_USER_TIMEOUT accurate for RTOs in commit b701a99e431d ("tcp: Add
tcp_clamp_rto_to_user_timeout() helper to improve accuracy").

Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210122191306.GA99540@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: protect features update by RCU to avoid deadlock

commit f0947d0d21b219e03940b9be6628a43445c0de7a upstream.

Function __team_compute_features() is protected by team->lock
mutex when it is called from team_compute_features() used when
features of an underlying device is changed. This causes
a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device
is fired due to change propagated from team driver (e.g. MTU
change). It's because callbacks like team_change_mtu() or
team_vlan_rx_{add,del}_vid() protect their port list traversal
by team->lock mutex.

Example (r8169 case where this driver disables TSO for certain MTU
values):
...
[ 6391.348202]  __mutex_lock.isra.6+0x2d0/0x4a0
[ 6391.358602]  team_device_event+0x9d/0x160 [team]
[ 6391.363756]  notifier_call_chain+0x47/0x70
[ 6391.368329]  netdev_update_features+0x56/0x60
[ 6391.373207]  rtl8169_change_mtu+0x14/0x50 [r8169]
[ 6391.378457]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.387022]  dev_set_mtu+0x52/0x90
[ 6391.390820]  team_change_mtu+0x64/0xf0 [team]
[ 6391.395683]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.399963]  do_setlink+0x231/0xf50
...

In fact team_compute_features() called from team_device_event()
does not need to be protected by team->lock mutex and rcu_read_lock()
is sufficient there for port list traversal.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit

commit aa2c24e7f415e9c13635cee22ff4e15a80215551 upstream.

Parameter ql2xenforce_iocb_limit is enabled by default.

Link: https://lore.kernel.org/r/20210118184922.23793-1-ematsumiya@suse.de
Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking")
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values()

commit 543466ef3571069b8eb13a8ff7c7cfc8d8a75c43 upstream.

The allocation uses sizeof(u32) when it should use sizeof(unsigned long)
so it leads to memory corruption later in the function when the data is
initialized.

Fixes: 5aebe7c7f9c2 ("ASoC: topology: fix endianness issues")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YAf+8QZoOv+ct526@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Properly unregister DAI on removal

commit fc4cb1e15f0c66f2e37314349dc4a82bd946fbb1 upstream.

DAIs need to be removed when topology unload function is called (usually
done when component is being removed). We can't do this when device is
being removed, as structures we operate on when removing DAI can already
be freed.

Fixes: 6ae4902f2f34 ("ASoC: soc-topology: use devm_snd_soc_register_dai()")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210120152846.1703655-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default

commit 5ac154443e686b06242aa49de30a12b74ea9ca98 upstream.

hdmi-codec is an optional property.  Ignore to bind TDM DAI link
if the property isn't specified.

Fixes: f2024dc55fcb ("ASoC: mediatek: mt8183: use hdmi-codec")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210120092237.1553938-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default

commit 4d36ed8eb0f749c9e781e0d3b041a7adeedcdaa9 upstream.

hdmi-codec is an optional property.  Ignore to bind TDM DAI link
if the property isn't specified.

Fixes: 5bdbe9771177 ("ASoC: mediatek: mt8183-da7219: use hdmi-codec")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210120092237.1553938-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: fix possible resource leak

commit d8f923c3ab96dbbb4e3c22d1afc1dc1d3b195cd8 upstream.

Put the device to avoid resource leak on path that the polling flag is
invalid.

Fixes: a831b9132065 ("NFC: Do not return EBUSY when stopping a poll that's already stopped")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121153745.122184-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: fix resource leak when target index is invalid

commit 3a30537cee233fb7da302491b28c832247d89bbe upstream.

Goto to the label put_dev instead of the label error to fix potential
resource leak on path that the target index is invalid.

Fixes: c4fbb6515a4d ("NFC: The core part should generate the target index")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121152748.98409-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix memory leak in rxrpc_lookup_local

commit b8323f7288abd71794cd7b11a4c0a38b8637c8b5 upstream.

Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked.

struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp)
-               peer->local = local;
+               peer->local = rxrpc_get_local(local);

rxrpc_discard_prealloc also need ref release in discarding.

syzbot report:
BUG: memory leak
unreferenced object 0xffff8881080ddc00 (size 256):
  comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff  ................
  backtrace:
    [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline]
    [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline]
    [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline]
    [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244
    [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149
    [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64
    [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126
    [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152
    [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342
    [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483
    [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110
    [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226
    [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957
    [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline]
    [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline]
    [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023
    [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: forwarding: Specify interface when invoking mausezahn

[ Upstream commit 11df27f7fdf02cc2bb354358ad482e1fdd690589 ]

Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.

Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-multipath: Early exit if no path is available

[ Upstream commit d1bcf006a9d3d63c1bcb65a993cb13756954cd9c ]

nvme_round_robin_path() should test if the return ns pointer is valid.
nvme_next_ns() will return a NULL pointer if there is no path left.

Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()

[ Upstream commit 494b3688bb11a21af12e92a344a1313486693d47 ]

An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid()
to check the address alignment. This leads to a lot of spurious kernel
warnings:

[  485.837093] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[  485.837098] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[  492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed
[  492.494147] DMAR: Invalidate non-aligned address 7f7728800000, order 11
[  492.508965] DMAR: Invalidate non-aligned address 7f7728800000, order 11

Fix it by checking the alignment in right way.

Fixes: 288d08e780088 ("iommu/vt-d: Handle non-page aligned address")
Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Use IVHD EFR for early initialization of IOMMU features

[ Upstream commit a44092e326d403c7878018ba532369f84d31dbfa ]

IOMMU Extended Feature Register (EFR) is used to communicate
the supported features for each IOMMU to the IOMMU driver.
This is normally read from the PCI MMIO register offset 0x30,
and used by the iommu_feature() helper function.

However, there are certain scenarios where the information is needed
prior to PCI initialization, and the iommu_feature() function is used
prematurely w/o warning. This has caused incorrect initialization of IOMMU.
This is the case for the commit 6d39bdee238f ("iommu/amd: Enforce 4k
mapping for certain IOMMU data structures")

Since, the EFR is also available in the IVHD header, and is available to
the driver prior to PCI initialization. Therefore, default to using
the IVHD EFR instead.

Fixes: 6d39bdee238f ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of/device: Update dma_range_map only when dev has valid dma-ranges

[ Upstream commit 89c7cb1608ac3c7ecc19436469f35ed12da97e1d ]

The commit e0d072782c73 ("dma-mapping: introduce DMA range map,
supplanting dma_pfn_offset") always update dma_range_map even though it was
already set, like in the sunxi_mbus driver. the issue is reported at [1].
This patch avoid this(Updating it only when dev has valid dma-ranges).

Meanwhile, dma_range_map contains the devices' dma_ranges information,
This patch moves dma_range_map before of_iommu_configure. The iommu
driver may need to know the dma_address requirements of its iommu
consumer devices.

[1] https://lore.kernel.org/linux-arm-kernel/5c7946f3-b56e-da00-a750-be097c7ceb32@arm.com/

CC: Frank Rowand <frowand.list@gmail.com>
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset"),
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210119105203.15530-1-yong.wu@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/IORT: Do not blindly trust DMA masks from firmware

[ Upstream commit a1df829ead5877d4a1061e976a50e2e665a16f24 ]

Address issue observed on real world system with suboptimal IORT table
where DMA masks of PCI devices would get set to 0 as result.

iort_dma_setup() would query the root complex'/named component IORT
entry for a DMA mask, and use that over the one the device has been
configured with earlier.

Ideally we want to use the minimum mask of what the IORT contains for
the root complex and what the device was configured with.

Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: dev: prevent potential information leak in can_fill_info()

[ Upstream commit b552766c872f5b0d90323b24e4c9e8fa67486dd5 ]

The "bec" struct isn't necessarily always initialized. For example, the
mcp251xfd_get_berr_counter() function doesn't initialize anything if the
interface is down.

Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters")
Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable

[ Upstream commit e2194a1744e8594e82a861687808c1adca419b85 ]

If a non nat tuple entry is inserted just to the regular tuples
rhashtable (ct_tuples_ht) and not to natted tuples rhashtable
(ct_nat_tuples_ht). Commit bc562be9674b ("net/mlx5e: CT: Save ct entries
tuples in hashtables") mixed up the return labels and names sot that on
cleanup or failure we still try to remove for the natted tuples rhashtable.

Fix that by correctly checking if a natted tuples insertion
before removing it. While here make it more readable.

Fixes: bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset

[ Upstream commit 8355060f5ec381abda77659f91f56302203df535 ]

Sometimes, channel params are changed without recreating the channels.
It happens in two basic cases: when the channels are closed, and when
the parameter being changed doesn't affect how channels are configured.
Such changes invoke a hardware command that might fail. The whole
operation should be reverted in such cases, but the code that restores
the parameters' values in the driver was missing. This commit adds this
handling.

Fixes: 2e20a151205b ("net/mlx5e: Fail safe mtu and lro setting")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Revert parameters on errors when changing trust state without reset

[ Upstream commit 912c9b5fcca1ab65b806c19dd3b3cb12d73c6fe2 ]

Trust state may be changed without recreating the channels. It happens
when the channels are closed, and when channel parameters (min inline
mode) stay the same after changing the trust state. Changing the trust
state is a hardware command that may fail. The current code didn't
restore the channel parameters to their old values if an error happened
and the channels were closed. This commit adds handling for this case.

Fixes: 6e0504c69811 ("net/mlx5e: Change inline mode correctly when changing trust state")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Correctly handle changing the number of queues when the interface is down

[ Upstream commit 57ac4a31c48377a3e675b2a731ceacbefefcd34d ]

This commit addresses two issues related to changing the number of
queues when the channels are closed:

1. Missing call to mlx5e_num_channels_changed to update
real_num_tx_queues when the number of TCs is changed.

2. When mlx5e_num_channels_changed returns an error, the channel
parameters must be reverted.

Two Fixes: tags correspond to the first commits where these two issues
were introduced.

Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases")
Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix CT rule + encap slow path offload and deletion

[ Upstream commit 89e394675818bde8e30e135611c506455fa03fb7 ]

Currently, if a neighbour isn't valid when offloading tunnel encap rules,
we offload the original match and replace the original action with
"goto slow path" action. For this we use a temporary flow attribute based
on the original flow attribute and then change the action. Flow flags,
which among those is the CT flag, are still shared for the slow path rule
offload, so we end up parsing this flow as a CT + goto slow path rule.

Besides being unnecessary, CT action offload saves extra information in
the passed flow attribute, such as created ct_flow and mod_hdr, which
is lost onces the temporary flow attribute is freed.

When a neigh is updated and is valid, we offload the original CT rule
with original CT action, which again creates a ct_flow and mod_hdr
and saves it in the flow's original attribute. Then we delete the slow
path rule with a temporary flow attribute based on original updated
flow attribute, and we free the relevant ct_flow and mod_hdr.

Then when tc deletes this flow, we try to free the ct_flow and mod_hdr
on the flow's attribute again.

To fix the issue, skip all furture proccesing (CT/Sample/Split rules)
in offload/unoffload of slow path rules.

Call trace:
[  758.850525] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000218
[  758.952987] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[  758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O)
[  758.964225]  ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E)
[  759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G           OE     5.4.60-mlnx.52.gde81e85 #1
[  759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan  4 2021
[  759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[  759.207344] pstate: a0000005 (NzCv daif -PAN -UAO)
[  759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[  759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core]
[  759.405858] Call trace:
[  759.410804]  mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[  759.421337]  __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core]
[  759.433963]  mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core]
[  759.446942]  mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core]
[  759.457821]  mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core]
[  759.469051]  mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core]
[  759.481325]  mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core]
[  759.492901]  mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core]
[  759.504127]  mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core]
[  759.515314]  process_one_work+0x178/0x400
[  759.523350]  worker_thread+0x58/0x3e8
[  759.530685]  kthread+0x100/0x12c
[  759.537152]  ret_from_fork+0x10/0x18
[  759.544320] Code: 97ffef55 51000673 3100067f 54ffff41 (b9421ab3)
[  759.556548] ---[ end trace fab818bb1085832d ]---

Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled

[ Upstream commit 156878d0e697187c7d207ee6c22afe50b7f3678c ]

The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable
to control compilation of TC hardware offloads implementation.
When this configuration is disabled the driver is still wrongly
reports in ethtool that hw-tc-offload is supported.

Fixed by reporting hw-tc-offload is supported only when
CONFIG_MLX5_CLS_ACT is enabled.

Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Maintain separate page trees for ECPF and PF functions

[ Upstream commit 0aa128475d33d2d0095947eeab6b3e4d22dbd578 ]

Pages for the host PF and ECPF were stored in the same tree, so the ECPF
pages were being freed along with the host PF's when the host driver
unloaded.

Combine the function ID and ECPF flag to use as an index into the
x-array containing the trees to get a different tree for the host PF and
ECPF.

Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Reduce tc unsupported key print level

[ Upstream commit 48470a90a42a64dd2f70743a149894a292b356e0 ]

"Unsupported key used:" appears in kernel log when flows with
unsupported key are used, arp fields for example.

OpenVSwitch was changed to match on arp fields by default that
caused this warning to appear in kernel log for every arp rule, which
can be a lot.

Fix by lowering print level from warning to debug.

Fixes: e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: free page before return

[ Upstream commit 258ed19f075fbc834fe5d69d8b54983fc11e0d4a ]

Instead of directly return, goto the error handling label to free
allocated page.

Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: E-switch, Fix rate calculation for overflow

[ Upstream commit 1fe3e3166b35240615ab7f8276af2bbf2e51f559 ]

rate_bytes_ps is a 64-bit field. It passed as 32-bit field to
apply_police_params(). Due to this when police rate is higher
than 4Gbps, 32-bit calculation ignores the carry. This results
in incorrect rate configurationn the device.

Fix it by performing 64-bit calculation.

Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix memory leak on flow table creation error flow

[ Upstream commit 487c6ef81eb98d0a43cb08be91b1fcc9b4250626 ]

When we create the ft object we also init rhltable in ft->fgs_hash.
So in error flow before kfree of ft we need to destroy that rhltable.

Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: fix link speed advertising

[ Upstream commit 329a3678ec69962aa67c91397efbd46d36635f91 ]

Link speed advertising in igc has two problems:

- When setting the advertisement via ethtool, the link speed is converted
  to the legacy 32 bit representation for the intel PHY code.
  This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being
  beyond bit 31).  As a result, any call to `ethtool -s ...' drops the
  2500Mbit/s link speed from the PHY settings.  Only reloading the driver
  alleviates that problem.

  Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the
  Intel PHY ADVERTISE_2500_FULL bit explicitly.

- Rather than checking the actual PHY setting, the .get_link_ksettings
  function always fills link_modes.advertising with all link speeds
  the device is capable of.

  Fix this by checking the PHY autoneg_advertised settings and report
  only the actually advertised speeds up to ethtool.

Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: acquire VSI pointer only after VF is initialized

[ Upstream commit 67a3c6b3cc40bb217c3ff947a55053151a00fea0 ]

This change simplifies the VF initialization check and also minimizes
the delay between acquiring the VSI pointer and using it. As known by
the commit being fixed, there is a risk of the VSI pointer getting
changed. Therefore minimize the delay between getting and using the
pointer.

Fixes: 9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix MSI-X vector fallback logic

[ Upstream commit f3fe97f64384fa4073d9dc0278c4b351c92e295c ]

The current MSI-X enablement logic tries to enable best-case MSI-X
vectors and if that fails we only support a bare-minimum set. This
includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X
for the OICR interrupt. Unfortunately, the driver fails to load when we
don't get as many MSI-X as requested for a couple reasons.

First, the code to allocate MSI-X in the driver tries to allocate
num_online_cpus() MSI-X for LAN traffic without caring about the number
of MSI-X actually enabled/requested from the kernel for LAN traffic.
So, when calling ice_get_res() for the PF VSI, it returns failure
because the number of available vectors is less than requested. Fix
this by not allowing the PF VSI to allocation  more than
pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues.
Limiting the number of queues is done because we don't want more than
1 Tx/Rx queue per interrupt due to performance conerns.

Second, the driver assigns pf->num_lan_msix = 2, to account for LAN
traffic and the OICR. However, pf->num_lan_msix is only meant for LAN
MSI-X. This is causing a failure when the PF VSI tries to
allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has
already been reserved, so there may not be enough MSI-X vectors left.
Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the
ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for
the failure case.

Update the related defines used in ice_ena_msix_range() to align with
the above behavior and remove the unused RDMA defines because RDMA is
currently not supported. Also, remove the now incorrect comment.

Fixes: 152b978a1f90 ("ice: Rework ice_ena_msix_range")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Don't allow more channels than LAN MSI-X available

[ Upstream commit 943b881e35829403da638fcb34a959125deafef3 ]

Currently users could create more channels than LAN MSI-X available.
This is happening because there is no check against pf->num_lan_msix
when checking the max allowed channels and will cause performance issues
if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not
allowing more channels than LAN MSI-X available in pf->num_lan_msix.

Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: update dev_addr in ice_set_mac_address even if HW filter exists

[ Upstream commit 13ed5e8a9b9ccd140a79e80283f69d724c9bb2be ]

Fix the driver to copy the MAC address configured in ndo_set_mac_address
into dev_addr, even if the MAC filter already exists in HW. In some
situations (e.g. bonding) the netdev's dev_addr could have been modified
outside of the driver, with no change to the HW filter, so the driver
cannot assume that they match.

Fixes: 757976ab16be ("ice: Fix check for removing/adding mac filters")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Implement flow for IPv6 next header (extension header)

[ Upstream commit 1b0b0b581b945ee27beb70e8199270a22dd5a2f6 ]

This patch is based on a similar change to i40e by Slawomir Laba:
"i40e: Implement flow for IPv6 next header (extension header)".

When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.

The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6.
The extension header was not skipped at all.

The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.

Fixes: a4e82a81f573 ("ice: Add support for tunnel offloads")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: fix FDir IPv6 flexbyte

[ Upstream commit 29e2d9eb82647654abff150ff02fa1e07362214f ]

The packet classifier would occasionally misrecognize an IPv6 training
packet when the next protocol field was 0. The correct value for
unspecified protocol is IPPROTO_NONE.

Fixes: 165d80d6adab ("ice: Support IPv6 Flow Director filters")
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: pause TX while changing interface type

[ Upstream commit 054c9939b4800a91475d8d89905827bf9e1ad97a ]

syzbot reported a crash that happened when changing the interface
type around a lot, and while it might have been easy to fix just
the symptom there, a little deeper investigation found that really
the reason is that we allowed packets to be transmitted while in
the middle of changing the interface type.

Disallow TX by stopping the queues while changing the type.

Fixes: 34d4bc4d41d2 ("mac80211: support runtime interface type changes")
Reported-by: syzbot+d7a3b15976bf7de2238a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210122171115.b321f98f4d4f.I6997841933c17b093535c31d29355be3c0c39628@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: reschedule in long-running memory reads

[ Upstream commit 3d372c4edfd4dffb7dea71c6b096fb414782b776 ]

If we spin for a long time in memory reads that (for some reason in
hardware) take a long time, then we'll eventually get messages such
as

  watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272]

This is because the reading really does take a very long time, and
we don't schedule, so we're hogging the CPU with this task, at least
if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y.

Previously I misinterpreted the situation and thought that this was
only going to happen if we had interrupts disabled, and then fixed
this (which is good anyway, however), but that didn't always help;
looking at it again now I realized that the spin unlock will only
reschedule if CONFIG_PREEMPT is used.

In order to avoid this issue, change the code to cond_resched() if
we've been spinning for too long here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: use jiffies for memory read spin time limit

[ Upstream commit 6701317476bbfb1f341aa935ddf75eb73af784f9 ]

There's no reason to use ktime_get() since we don't need any better
precision than jiffies, and since we no longer disable interrupts
around this code (when grabbing NIC access), jiffies will work fine.
Use jiffies instead of ktime_get().

This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule
in long-running memory reads". The code gets simpler with the weird clock use
etc. removed before we add cond_resched().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: set LTR on more devices

[ Upstream commit ed0022da8bd9a3ba1c0e1497457be28d52afa7e1 ]

To avoid completion timeouts during device boot, set up the
LTR timeouts on more devices - similar to what we had before
for AX210.

This also corrects the AX210 workaround to be done only on
discrete (non-integrated) devices, otherwise the registers
have no effect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: edb625208d84 ("iwlwifi: pcie: set LTR to avoid completion timeout")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pnvm: don't try to load after failures

[ Upstream commit 82a08d0cd7b503be426fb856a0fb73c9c976aae1 ]

If loading the PNVM file failed on the first try during the
interface up, the file is unlikely to show up later, and we
already don't try to reload it if it changes, so just don't
try loading it again and again.

This also fixes some issues where we may try to load it at
resume time, which may not be possible yet.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.5ac6828a0bbe.I7d308358b21d3c0c84b1086999dbc7267f86e219@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pnvm: don't skip everything when not reloading

[ Upstream commit 1c58bed4b7f7551239b9005ad0a9a6566a3d9fbe ]

Even if we don't reload the file from disk, we still need to
trigger the PNVM load flow with the device; fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.85ef56c4ef8c.I3b853ce041a0755d45e448035bef1837995d191b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: avoid potential PNVM leaks

[ Upstream commit 34b9434cd0d425330a0467e767f8d047ef62964d ]

If we erroneously try to set the PNVM data again after it has
already been set, we could leak the old DMA memory. Avoid that
and warn, we shouldn't be doing this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.929c2d680429.I086b9490e6c005f3bcaa881b617e9f61908160f3@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup

[ Upstream commit 70041000450d0a071bf9931d634c8e2820340236 ]

The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real
DAI ID, not an index into v->dai_driver. Looking it up again seems
entirely redundant.

For IPQ806x (and SC7180 since commit 09a4f6f5d21c
("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is
now often an out-of-bounds read because the indexes in the "dai_driver"
array no longer match the actual DAI ID.

Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210125104442.135899-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies

[ Upstream commit bd9038faa9d7f162b47e1577e35ec5eac39f9d90 ]

The LKP bot reports the following issue:

WARNING: unmet direct dependencies detected for SOUNDWIRE_INTEL
  Depends on [m]: SOUNDWIRE [=m] && ACPI [=y] && SND_SOC [=y]
  Selected by [y]:
  - SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && SOUND [=y] && !UML &&
  SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] &&
  SND_SOC_SOF_INTEL_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_PCI [=y]

This comes from having tristates being configured independently, when
in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF
choices: when the SOF code is compiled as built-in, the
CONFIG_SOUNDWIRE also needs to be 'y'.

The easiest fix is to replace the 'depends' with a 'select' and have a
single user selection to activate SoundWire on Intel platforms. This
still allows regmap to be compiled independently as a module.

This is just a temporary fix, the select/depend usage will be
revisited and the SOF Kconfig re-organized, as suggested by Arnd
Bergman.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: a115ab9b8b93e ('ASoC: SOF: Intel: add build support for SoundWire')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210122005725.94163-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn

[ Upstream commit 1bcf34fdac5f8c2fcd16796495db75744612ca27 ]

When we're scheduling a layoutreturn, we need to ignore any further
incoming layouts with sequence ids that are going to be affected by the
layout return.

Fixes: 44ea8dfce021 ("NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()

[ Upstream commit 814b84971388cd5fb182f2e914265b3827758455 ]

If the server returns a new stateid that does not match the one in our
cache, then pnfs_layout_process() will leak the layout segments returned
by pnfs_mark_layout_stateid_invalid().

Fixes: 9888d837f3cf ("pNFS: Force a retry of LAYOUTGET if the stateid doesn't match our cache")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt

[ Upstream commit 4025c784c573cab7e3f84746cc82b8033923ec62 ]

When an asynchronous interrupt calls irq_exit, it checks for softirqs
that may have been created, and runs them. Running softirqs enables
local irqs, which can replay pending interrupts causing recursion in
replay_soft_interrupts. This abridged trace shows how this can occur:

! NIP replay_soft_interrupts
  LR  interrupt_exit_kernel_prepare
  Call Trace:
    interrupt_exit_kernel_prepare (unreliable)
    interrupt_return
  --- interrupt: ea0 at __rb_reserve_next
  NIP __rb_reserve_next
  LR __rb_reserve_next
  Call Trace:
    ring_buffer_lock_reserve
    trace_function
    function_trace_call
    ftrace_call
    __do_softirq
    irq_exit
    timer_interrupt
!   replay_soft_interrupts
    interrupt_exit_kernel_prepare
    interrupt_return
  --- interrupt: ea0 at arch_local_irq_restore

This can not be prevented easily, because softirqs must not block hard
irqs, so it has to be dealt with.

The recursion is bounded by design in the softirq code because softirq
replay disables softirqs and loops around again to check for new
softirqs created while it ran, so that's not a problem.

However it does mess up interrupt replay state, causing superfluous
interrupts when the second replay_soft_interrupts clears a pending
interrupt, leaving it still set in the first call in the 'happened'
local variable.

Fix this by not caching a copy of irqs_happened across interrupt
handler calls.

Fixes: 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210123061244.2076145-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete

[ Upstream commit c1c3ba1f78354a20222d291ed6fedd17b7a74fd7 ]

If dobj->control is not initialized we end up in an OOPs during
skl_tplg_complete:

[   26.553358] BUG: kernel NULL pointer dereference, address:
0000000000000078
[   26.561151] #PF: supervisor read access in kernel mode
[   26.566897] #PF: error_code(0x0000) - not-present page
[   26.572642] PGD 0 P4D 0
[   26.575479] Oops: 0000 [#1] PREEMPT SMP PTI
[   26.580158] CPU: 2 PID: 2082 Comm: udevd Tainted: G         C
5.4.81 #4
[   26.588232] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[   26.597082] RIP: 0010:skl_tplg_complete+0x70/0x144 [snd_soc_skl]

Fixes: 2d744ecf2b98 ("ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHL")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-1-ribalda@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: altera: Fix memory leak on error path

[ Upstream commit 55a8b42e8645a6dab88674a30cb6ed328e660680 ]

Release master that have been previously allocated if the number of
chipselect is invalid.

Fixes: 8e04187c1bc7 ("spi: altera: add SPI core parameters support via platform data.")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210120082635.49304-1-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field

[ Upstream commit 1e066a23e76f90c9c39c189fe0dbf7c6e3dd5044 ]

BIT_WIDTH field in I2S_CTL register is two bits wide, however
recent regmap field conversion patch trimmed it down to one bit.
Fix this by correcting the bit range!

Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210119174700.32639-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY

[ Upstream commit cd3484f7f1386071b1af159023917ed12c182d39 ]

lpass hdmi support patch totally removed support for MI2S TERTIARY
and QUATERNARY.

One of the major issue was spotted with the design of having
separate SoC specific header files for the common lpass driver.
This design is prone to break as an when new SoC header is added
as the common DAI ids of other SoCs will be overwritten by the
new ones.

Having a common header qcom,lpass.h should fix the issue and any new
DAI ids should be added to the common header.

With this change lpass also needs a new of_xlate function to resolve
dai name.

Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")
Reported-by: Jun Nie <jun.nie@linaro.org>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivasa Rao <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210119171527.32145-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Fix incorrect volatile registers

[ Upstream commit 315fbe4cef98ee5fb6085bc54c7f25eb06466c70 ]

MI2S and DMA control registers are not volatile, so remove these from volatile registers list.
Registers reset state check by reading non volatile registers makes no use,
so remove error check from cpu and platform trigger callbacks.
Initialized map variable two times in lpass platform trigger API,
so remove redundant initialization.

Fixes commit b1824968221cc ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state")

Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1608192514-29695-2-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dt-bindings: lpass: Fix and common up lpass dai ids

[ Upstream commit 09a4f6f5d21cb1f2633f4e8b893336b60eee9a01 ]

Existing header file design of having separate SoC specific header files
for the common lpass driver has mutiple issues.
This design is prone to break as an when new SoC header is added
as the common DAI ids of other SoCs will be overwritten by the
new ones.

One of them surfaced by recent patch that adds support to sc7180, this
one totally broke LPASS drivers on other Qualcomm SoCs.

Before this gets worst, fix this by having a common header qcom,lpass.h.
This should fix the issue and any new DAI ids should be added to the
common header. This will be more sustainable then the existing design!

Fixes: 12fbfc4cabec6595 ("ASoC: Add sc7180-lpass binding header hdmi define")
Reported-by: Jun Nie <jun.nie@linaro.org>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivasa Rao <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210119171527.32145-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cxgb4: Fix the reported max_recv_sge value

[ Upstream commit a372173bf314d374da4dd1155549d8ca7fc44709 ]

The max_recv_sge value is wrongly reported when calling query_qp, This is
happening due to a typo when assigning the max_recv_sge value, the value
of sq_max_sges was assigned instead of rq_max_sges.

Fixes: 3e5c02c9ef9a ("iw_cxgb4: Support query_qp() verb")
Link: https://lore.kernel.org/r/20210114191423.423529-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: imx: select SOC_BUS to fix firmware build

[ Upstream commit 82c082784e03a9a9c043345f9bc04bc8254cf6da ]

Fix build error in firmware/imx/ selecting SOC_BUS.

riscv32-linux-ld: drivers/firmware/imx/imx-scu-soc.o: in function `.L9':
imx-scu-soc.c:(.text+0x1b0): undefined reference to `soc_device_register'

Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mp: Correct the gpio ranges of gpio3

[ Upstream commit b764eb65e1c932f0500b30fcc06417cd9bc3e583 ]

On i.MX8MP, The GPIO3's secondary gpio-ranges's 'gpio controller offset'
cell value should be 26, so correct it.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Fixes: 6d9b8d20431f ("arm64: dts: freescale: Add i.MX8MP dtsi support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms

[ Upstream commit 2cc0bfc9c12784188482a8f3d751d44af45b0d97 ]

The PHY address bit 2 is configured by the LED pin. Attaching a LED
to this pin is not sufficient to guarantee this configuration pin is
correctly read. This leads to some platforms having their PHY at
address 0 and others at address 4.

If there is no phy-handle specified, the FEC driver will scan the PHY
bus for a PHY and use that. Consequently, adding the DT configuration
of the PHY and the phy properties to the FEC driver broke some boards.

Fix this by removing the phy-handle property, and listing two PHY
entries for both possible PHY addresses, so that the DT configuration
for the PHY can be found by the PHY driver.

Fixes: 86b08bd5b994 ("ARM: dts: imx6-sr-som: add ethernet PHY configuration")
Reported-by: Christoph Mattheis <christoph.mattheis@arcor.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status

[ Upstream commit 70b6ff4c549a62b59b286445f66cfec6c5327ac8 ]

Fix typo so the gpio i2c busses are really disabled.

Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: imx: fix imx8m dependencies

[ Upstream commit 097530bf8cd469ef7b3d52ef00cafb64b33bacb1 ]

Selecting ARM_GIC_V3 on non-CP15 processors leads to build failures
like

arch/arm/include/asm/arch_gicv3.h: In function 'write_ICC_AP1R3_EL1':
arch/arm/include/asm/arch_gicv3.h:36:40: error: 'c12' undeclared (first use in this function)
   36 | #define __ICC_AP1Rx(x)   __ACCESS_CP15(c12, 0, c9, x)
      |                                        ^~~

Add a dependency to only enable the gic driver when building for
at an ARMv7 target, which is the closes approximation to the ARMv8
processor that is actually in this chip.

Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls1028a: fix the offset of the reset register

[ Upstream commit 1653e3d470629d25c64cd8a2f84adb20a9348b0c ]

The offset of the reset request register is 0, the absolute address is
0x1e60000. Boards without PSCI support will fail to perform a reset:

[   26.734700] reboot: Restarting system
[   27.743259] Unable to restart system
[   27.746845] Reboot failed -- System halted

Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Fix wraparound in xfrm_policy_addr_delta()

[ Upstream commit da64ae2d35d3673233f0403b035d4c6acbf71965 ]

Use three-way comparison for address components to avoid integer
wraparound in the result of xfrm_policy_addr_delta(). This ensures
that the search trees are built and traversed correctly.

Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0.
Prefix /0 has only one equivalence class.

Fixes: 9cf545ebd591d ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Visa Hankala <visa@hankala.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: xfrm: fix test return value override issue in xfrm_policy.sh

[ Upstream commit f6e9ceb7a7fc321a31a9dde93a99b7b4b016a3b3 ]

When running this xfrm_policy.sh test script, even with some cases
marked as FAIL, the overall test result will still be PASS:

$ sudo ./xfrm_policy.sh
PASS: policy before exception matches
FAIL: expected ping to .254 to fail (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
FAIL: expected ping to .254 to fail (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
FAIL: expected ping to .254 to fail (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
FAIL: expected ping to .254 to fail (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
FAIL: expected ping to .254 to fail (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
$ echo $?
0

This is because the $lret in check_xfrm() is not a local variable.
Therefore when a test failed in check_exceptions(), the non-zero $lret
will later get reset to 0 when the next test calls check_xfrm().

With this fix, the final return value will be 1. Make it easier for
testers to spot this failure.

Fixes: 39aa6928d462d0 ("xfrm: policy: fix netlink/pf_key policy lookups")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: fix disable_xfrm sysctl when used on xfrm interfaces

[ Upstream commit 9f8550e4bd9d78a8436c2061ad2530215f875376 ]

The disable_xfrm flag signals that xfrm should not be performed during
routing towards a device before reaching device xmit.

For xfrm interfaces this is usually desired as they perform the outbound
policy lookup as part of their xmit using their if_id.

Before this change enabling this flag on xfrm interfaces prevented them
from xmitting as xfrm_lookup_with_ifid() would not perform a policy lookup
in case the original dst had the DST_NOXFRM flag.

This optimization is incorrect when the lookup is done by the xfrm
interface xmit logic.

Fix by performing policy lookup when invoked by xfrmi as if_id != 0.

Similarly it's unlikely for the 'no policy exists on net' check to yield
any performance benefits when invoked from xfrmi.

Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Fix oops in xfrm_replay_advance_bmp

[ Upstream commit 56ce7c25ae1525d83cf80a880cf506ead1914250 ]

When setting xfrm replay_window to values higher than 32, a rare
page-fault occurs in xfrm_replay_advance_bmp:

  BUG: unable to handle page fault for address: ffff8af350ad7920
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD ad001067 P4D ad001067 PUD 0
  Oops: 0002 [#1] SMP PTI
  CPU: 3 PID: 30 Comm: ksoftirqd/3 Kdump: loaded Not tainted 5.4.52-050452-generic #202007160732
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
  RIP: 0010:xfrm_replay_advance_bmp+0xbb/0x130
  RSP: 0018:ffffa1304013ba40 EFLAGS: 00010206
  RAX: 000000000000010d RBX: 0000000000000002 RCX: 00000000ffffff4b
  RDX: 0000000000000018 RSI: 00000000004c234c RDI: 00000000ffb3dbff
  RBP: ffffa1304013ba50 R08: ffff8af330ad7920 R09: 0000000007fffffa
  R10: 0000000000000800 R11: 0000000000000010 R12: ffff8af29d6258c0
  R13: ffff8af28b95c700 R14: 0000000000000000 R15: ffff8af29d6258fc
  FS:  0000000000000000(0000) GS:ffff8af339ac0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff8af350ad7920 CR3: 0000000015ee4000 CR4: 00000000001406e0
  Call Trace:
   xfrm_input+0x4e5/0xa10
   xfrm4_rcv_encap+0xb5/0xe0
   xfrm4_udp_encap_rcv+0x140/0x1c0

Analysis revealed offending code is when accessing:

replay_esn->bmp[nr] |= (1U << bitnr);

with 'nr' being 0x07fffffa.

This happened in an SMP system when reordering of packets was present;
A packet arrived with a "too old" sequence number (outside the window,
i.e 'diff > replay_window'), and therefore the following calculation:

bitnr = replay_esn->replay_window - (diff - pos);

yields a negative result, but since bitnr is u32 we get a large unsigned
quantity (in crash dump above: 0xffffff4b seen in ecx).

This was supposed to be protected by xfrm_input()'s former call to:

if (x->repl->check(x, skb, seq)) {

However, the state's spinlock x->lock is *released* after '->check()'
is performed, and gets re-acquired before '->advance()' - which gives a
chance for a different core to update the xfrm state, e.g. by advancing
'replay_esn->seq' when it encounters more packets - leading to a
'diff > replay_window' situation when original core continues to
xfrm_replay_advance_bmp().

An attempt to fix this issue was suggested in commit bcf66bf54aab
("xfrm: Perform a replay check after return from async codepaths"),
by calling 'x->repl->recheck()' after lock is re-acquired, but fix
applied only to asyncronous crypto algorithms.

Augment the fix, by *always* calling 'recheck()' - irrespective if we're
using async crypto.

Fixes: 0ebea8ef3559 ("[IPSEC]: Move state lock into x->type->input")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "block: simplify set_init_blocksize" to regain lost performance

commit 8dc932d3e8afb65e12eba7495f046c83884c49bf upstream.

The cited commit introduced a serious regression with SATA write speed,
as found by bisecting. This patch reverts this commit, which restores
write speed back to the values observed before this commit.

The performance tests were done on a Helios4 NAS (2nd batch) with 4 HDDs
(WD8003FFBX) using dd (bs=1M count=2000). "Direct" is a test with a
single HDD, the rest are different RAID levels built over the first
partitions of 4 HDDs. Test results are in MB/s, R is read, W is write.

                | Direct | RAID0 | RAID10 f2 | RAID10 n2 | RAID6
----------------+--------+-------+-----------+-----------+--------
9011495c9466    | R:256  | R:313 | R:276     | R:313     | R:323
(before faulty) | W:254  | W:253 | W:195     | W:204     | W:117
----------------+--------+-------+-----------+-----------+--------
5ff9f19231a0    | R:257  | R:398 | R:312     | R:344     | R:391
(faulty commit) | W:154  | W:122 | W:67.7    | W:66.6    | W:67.2
----------------+--------+-------+-----------+-----------+--------
5.10.10         | R:256  | R:401 | R:312     | R:356     | R:375
unpatched       | W:149  | W:123 | W:64      | W:64.1    | W:61.5
----------------+--------+-------+-----------+-----------+--------
5.10.10         | R:255  | R:396 | R:312     | R:340     | R:393
patched         | W:247  | W:274 | W:220     | W:225     | W:121

Applying this patch doesn't hurt read performance, while improves the
write speed by 1.5x - 3.5x (more impact on RAID tests). The write speed
is restored back to the state before the faulty commit, and even a bit
higher in RAID tests (which aren't HDD-bound on this device) - that is
likely related to other optimizations done between the faulty commit and
5.10.10 which also improved the read speed.

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Fixes: 5ff9f19231a0 ("block: simplify set_init_blocksize")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion"

commit de641d74fb00f5b32f054ee154e31fb037e0db88 upstream.

This reverts commit fbdd0049d98d44914fc57d4b91f867f4996c787b.

Due to commit in fixes tag, netdevice events were received only in one net
namespace of mlx5_core_dev. Due to this when netdevice events arrive in
net namespace other than net namespace of mlx5_core_dev, they are missed.

This results in empty GID table due to RDMA device being detached from its
net device.

Hence, revert back to receive netdevice events in all net namespaces to
restore back RDMA functionality in non init_net net namespace. The
deadlock will have to be addressed in another patch.

Fixes: fbdd0049d98d ("RDMA/mlx5: Fix devlink deadlock on net namespace deletion")
Link: https://lore.kernel.org/r/20210117092633.10690-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_dynset: add timeout extension to template

commit 0c5b7a501e7400869ee905b4f7af3d6717802bcb upstream.

Otherwise, the newly create element shows no timeout when listing the
ruleset. If the set definition does not specify a default timeout, then
the set element only shows the expiration time, but not the timeout.
This is a problem when restoring a stateful ruleset listing since it
skips the timeout policy entirely.

Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: zImage: atags_to_fdt: Fix node names on added root nodes

commit 30596ae0547dbda469d31a2678d9072fb0a3fa27 upstream.

Commit 7536c7e03e74 ("of/fdt: Remove redundant kbasename function
call") exposed a bug creating DT nodes in the ATAGS to DT fixup code.
Non-existent nodes would mistaken get created with a leading '/'. The
problem was fdt_path_offset() takes a full path while creating a node
with fdt_add_subnode() takes just the basename.

Since this we only add root child nodes, we can just skip over the '/'.

Fixes: 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call")
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Qi Zheng <arch0.zheng@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210126023905.1631161-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx: build suspend-imx6.S with arm instruction set

commit a88afa46b86ff461c89cc33fc3a45267fff053e8 upstream.

When the kernel is configured to use the Thumb-2 instruction set
"suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL
(i.MX 6ULL) and Apalis iMX6 (i.MX 6Q).

It looks like the CPU resumes unconditionally in ARM instruction mode
and then chokes on the presented Thumb-2 code it should execute.

Fix this by using the arm instruction set for all code in
suspend-imx6.S.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Fixes: df595746fa69 ("ARM: imx: add suspend in ocram support for i.mx6q")
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: gcc-sm250: Use floor ops for sdcc clks

commit fd2383093593b23f8814a879093b746e502fe3cf upstream.

Followup to the commits 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use floor
ops for sdcc clks") and 6d37a8d19283 ("clk: qcom: gcc-sc7180: Use floor ops
for sdcc clks"). Use floor ops for sdcc clocks on sm8250.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Link: https://lore.kernel.org/r/20210109013314.3443134-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: mmp2: fix build without CONFIG_PM

commit c361c5a6c559d1e0a2717abe9162a71aa602954f upstream.

pm_clk_suspend()/pm_clk_resume() are defined as NULL pointers rather than
empty inline stubs without CONFIG_PM:

drivers/clk/mmp/clk-audio.c:402:16: error: called object type 'void *' is not a function or function pointer
        pm_clk_suspend(dev);
drivers/clk/mmp/clk-audio.c:411:15: error: called object type 'void *' is not a function or function pointer
        pm_clk_resume(dev);

I tried redefining the helper functions, but that caused additional
problems. This is the simple solution of replacing the __maybe_unused
trick with an #ifdef.

Fixes: 725262d29139 ("clk: mmp2: Add audio clock controller driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210103135503.3668784-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx: fix Kconfig warning for i.MX SCU clk

commit 73f6b7ed9835ad9f953aebd60dd720aabc487b81 upstream.

A previous patch introduced a harmless randconfig warning:

WARNING: unmet direct dependencies detected for MXC_CLK_SCU
  Depends on [n]: COMMON_CLK [=y] && ARCH_MXC [=n] && IMX_SCU [=y] && HAVE_ARM_SMCCC [=y]
  Selected by [m]:
  - CLK_IMX8QXP [=m] && COMMON_CLK [=y] && (ARCH_MXC [=n] && ARM64 [=y] || COMPILE_TEST [=y]) && IMX_SCU [=y] && HAVE_ARM_SMCCC [=y]

Since the symbol is now hidden and only selected by other symbols,
just remove the dependencies and require the other drivers to
get it right.

Fixes: 6247e31b7530 ("clk: imx: scu: fix MXC_CLK_SCU module build break")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201230155244.981757-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue

commit 2569063c7140c65a0d0ad075e95ddfbcda9ba3c0 upstream.

In case of blk_mq_is_sbitmap_shared(), we should test QUEUE_FLAG_HCTX_ACTIVE against
q->queue_flags instead of BLK_MQ_S_TAG_ACTIVE.

So fix it.

Cc: John Garry <john.garry@huawei.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Fixes: f1b49fdc1c64 ("blk-mq: Record active_queues_shared_sbitmap per tag_set for when using shared sbitmap")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: allow discard-* nodes to be optional

commit 0549cd67b01016b579047bce045b386202a8bcfc upstream.

This is inline with the specification described in blkif.h:

 * discard-granularity: should be set to the physical block size if
   node is not present.
 * discard-alignment, discard-secure: should be set to 0 if node not
   present.

This was detected as QEMU would only create the discard-granularity
node but not discard-alignment, and thus the setup done in
blkfront_setup_discard would fail.

Fix blkfront_setup_discard to not fail on missing nodes, and also fix
blkif_set_queue_limits to set the discard granularity to the physical
block size if none is specified in xenbus.

Fixes: ed30bf317c5ce ('xen-blkfront: Handle discard requests.')
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-By: Arthur Borsboom <arthurborsboom@gmail.com>
Link: https://lore.kernel.org/r/20210119105727.95173-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tee: optee: replace might_sleep with cond_resched

commit dcb3b06d9c34f33a249f65c08805461fb0c4325b upstream.

might_sleep() is a debugging aid and triggers rescheduling only for
certain kernel configurations. Replace with an explicit check and
reschedule to work for all kernel configurations. Fixes the following
trace:

  [  572.945146] rcu: INFO: rcu_sched self-detected stall on CPU
  [  572.949275] rcu:     0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974
  [  572.957964]  (t=2100 jiffies g=10393 q=21)
  [  572.962054] NMI backtrace for cpu 0
  [  572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1
  [  572.971188] Hardware name: STM32 (Device Tree Support)
  [  572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14)
  [  572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8)
  [  572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4)
  [  572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130)
  [  573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110)
  [  573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88)
  [  573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c)
  [  573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8)
  [  573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358)
  [  573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc)
  [  573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30)
  [  573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240)
  [  573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44)
  [  573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0)
  [  573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90)
  [  573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90)
  [  573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40)
  [  573.119732] fce0:                                                       ffff0004 00000000
  [  573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000
  [  573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff
  [  573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20)
  [  573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44)
  [  573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154)
  [  573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190)
  [  573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0)
  [  573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c)
  [  573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54)
  [  573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0)
  [  573.205803] ffa0:                   be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8
  [  573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8
  [  573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8

seen on STM32 DK2 with CONFIG_PREEMPT_NONE.

Fixes: 9f02b8f61f29 ("tee: optee: add might_sleep for RPC requests")
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
[jw: added fixes tag + small adjustments in the code]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Documentation: Fix spec for KVM_CAP_ENABLE_CAP_VM

commit a10f373ad3c760dd40b41e2f69a800ee7b8da15e upstream.

The documentation classifies KVM_ENABLE_CAP with KVM_CAP_ENABLE_CAP_VM
as a vcpu ioctl, which is incorrect. Fix it by specifying it as a VM
ioctl.

Fixes: e5d83c74a580 ("kvm: make KVM_CAP_ENABLE_CAP_VM architecture agnostic")
Signed-off-by: Quentin Perret <qperret@google.com>
Message-Id: <20210108165349.747359-1-qperret@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: fix big endian definition of ipv6_rpl_sr_hdr

commit 07d46d93c9acdfe0614071d73c415dd5f745cc6e upstream.

Following RFC 6554 [1], the current order of fields is wrong for big
endian definition. Indeed, here is how the header looks like:

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|  Next Header  |  Hdr Ext Len  | Routing Type  | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE |  Pad  |               Reserved                |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

This patch reorders fields so that big endian definition is now correct.

  [1] https://tools.ietf.org/html/rfc6554#section-3

Fixes: cfa933d938d8 ("include: uapi: linux: add rpl sr header definition")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/selftest: Fix potential memory leak

commit 3d480fe1befa0ef434f5c25199e7d45c26870555 upstream.

Object out is not released on path that no VMA instance found. The root
cause is jumping to an unexpected label on the error path.

Fixes: a47e788c2310 ("drm/i915/selftests: Exercise CS TLB invalidation")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122015640.16002-1-bianpan2016@163.com
(cherry picked from commit 2b015017d5cb01477a79ca184ac25c247d664568)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Check for all subplatform bits

commit 8f6d08c9af284d74276da6681348e4673f13caea upstream.

Current code is checking only 2 bits in the subplatform, but actually 3
bits are allocated for the field. Check all 3 bits.

Fixes: 805446c8347c ("drm/i915: Introduce concept of a sub-platform")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121161936.746591-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 27b695ee1af9bb36605e67055874ec081306ac28)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/dispnv50: Restore pushing of all data.

commit fd55b61ebd31449549e14c33574825d64de2b29b upstream.

Commit f844eb485eb056ad3b67e49f95cbc6c685a73db4 introduced a regression for
NV50, which lead to visual artifacts, tearing and eventual crashes.

In the changes of f844eb485eb056ad3b67e49f95cbc6c685a73db4 only the first line
was correctly translated to the new NVIDIA header macros:

- PUSH_NVSQ(push, NV827C, 0x0110, 0,
- 0x0114, 0);
+ PUSH_MTHD(push, NV827C, SET_PROCESSING,
+   NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE));

The lower part ("0x0114, 0") was probably omitted by accident.

This patch restores the push of the missing data and fixes the regression.

Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de>
Fixes: f844eb485eb05 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Correct POS1_SCL for hvs5

commit f6b57101a6b31277a4bde1d8028c46e898bd2ff2 upstream.

Fixes failure with 4096x1080 resolutions

[  284.315379] WARNING: CPU: 1 PID: 901 at drivers/gpu/drm/vc4/vc4_plane.c:981 vc4_plane_mode_set+0x1374/0x13c4
[  284.315385] Modules linked in: ir_rc5_decoder rpivid_hevc(C) bcm2835_codec(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) bcm2835_gpiomem v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc cdc_acm xpad ir_rc6_decoder rc_rc6_mce gpio_ir_recv fuse
[  284.315509] CPU: 1 PID: 901 Comm: kodi.bin Tainted: G         C        5.10.7 #1
[  284.315514] Hardware name: BCM2711
[  284.315518] Backtrace:
[  284.315533] [<c0cc5ca0>] (dump_backtrace) from [<c0cc6014>] (show_stack+0x20/0x24)
[  284.315540]  r7:ffffffff r6:00000000 r5:68000013 r4:c18ecf1c
[  284.315549] [<c0cc5ff4>] (show_stack) from [<c0cca638>] (dump_stack+0xc4/0xf0)
[  284.315558] [<c0cca574>] (dump_stack) from [<c022314c>] (__warn+0xfc/0x158)
[  284.315564]  r9:00000000 r8:00000009 r7:000003d5 r6:00000009 r5:c08cc7dc r4:c0fd09b8
[  284.315572] [<c0223050>] (__warn) from [<c0cc67ec>] (warn_slowpath_fmt+0x74/0xe4)
[  284.315577]  r7:c08cc7dc r6:000003d5 r5:c0fd09b8 r4:00000000
[  284.315584] [<c0cc677c>] (warn_slowpath_fmt) from [<c08cc7dc>] (vc4_plane_mode_set+0x1374/0x13c4)
[  284.315589]  r8:00000000 r7:00000000 r6:00001000 r5:c404c600 r4:c2e34600
[  284.315596] [<c08cb468>] (vc4_plane_mode_set) from [<c08cc984>] (vc4_plane_atomic_check+0x40/0x1c0)
[  284.315601]  r10:00000001 r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0
[  284.315605]  r4:c2e34600
[  284.315614] [<c08cc944>] (vc4_plane_atomic_check) from [<c0860504>] (drm_atomic_helper_check_planes+0xec/0x1ec)
[  284.315620]  r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0 r4:00000006
[  284.315627] [<c0860418>] (drm_atomic_helper_check_planes) from [<c0860658>] (drm_atomic_helper_check+0x54/0x9c)
[  284.315633]  r9:c2e35400 r8:00000006 r7:00000000 r6:c2ba7800 r5:c3d636c0 r4:00000000
[  284.315641] [<c0860604>] (drm_atomic_helper_check) from [<c08b7ca8>] (vc4_atomic_check+0x25c/0x454)
[  284.315645]  r7:00000000 r6:c2ba7800 r5:00000001 r4:c3d636c0
[  284.315652] [<c08b7a4c>] (vc4_atomic_check) from [<c0881278>] (drm_atomic_check_only+0x5cc/0x7e0)
[  284.315658]  r10:c404c6c8 r9:ffffffff r8:c472c480 r7:00000003 r6:c3d636c0 r5:00000000
[  284.315662]  r4:0000003c r3:c08b7a4c
[  284.315670] [<c0880cac>] (drm_atomic_check_only) from [<c089ba60>] (drm_mode_atomic_ioctl+0x758/0xa7c)
[  284.315675]  r10:c3d46000 r9:c3d636c0 r8:c2ce8a70 r7:027e3a54 r6:00000043 r5:c1fbb800
[  284.315679]  r4:0281a858
[  284.315688] [<c089b308>] (drm_mode_atomic_ioctl) from [<c086e9f8>] (drm_ioctl_kernel+0xc4/0x108)
[  284.315693]  r10:c03864bc r9:c1fbb800 r8:c3d47e64 r7:c089b308 r6:00000002 r5:c2ba7800
[  284.315697]  r4:00000000
[  284.315705] [<c086e934>] (drm_ioctl_kernel) from [<c086ee28>] (drm_ioctl+0x1e8/0x3a0)
[  284.315711]  r9:c1fbb800 r8:000000bc r7:c3d47e64 r6:00000038 r5:c0e59570 r4:00000038
[  284.315719] [<c086ec40>] (drm_ioctl) from [<c041f354>] (sys_ioctl+0x35c/0x914)
[  284.315724]  r10:c2d08200 r9:00000000 r8:c36fa300 r7:befdd870 r6:c03864bc r5:c36fa301
[  284.315728]  r4:c03864bc
[  284.315735] [<c041eff8>] (sys_ioctl) from [<c0200040>] (ret_fast_syscall+0x0/0x28)
[  284.315739] Exception stack(0xc3d47fa8 to 0xc3d47ff0)
[  284.315745] 7fa0:                   027eb750 befdd870 00000000 c03864bc befdd870 00000000
[  284.315750] 7fc0: 027eb750 befdd870 c03864bc 00000036 027e3948 0281a640 0281a850 027e3a50
[  284.315756] 7fe0: b4b64100 befdd844 b4b5ba2c b49c994c
[  284.315762]  r10:00000036 r9:c3d46000 r8:c0200204 r7:00000036 r6:c03864bc r5:befdd870
[  284.315765]  r4:027eb750

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-By: Lucas Nussbaum <lucas@debian.org>
Tested-By: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121105759.1262699-2-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>