drm/amdgpu: add DMUB trace event IRQ source define

[Why & How]
We use DMCUB outbox0 interrupt to log DMCUB trace buffer events
as Linux kernel traces, so need to add some irq source related
defination in the header files;

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/swsmu: clean up user profile function

Remove unnecessary comments, enable restore mode using
'|=' operator, fixes the alignment to improve the code
readability.

v2: Move all restoration flag check to bitwise '&' operator

Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable one vf mode on sienna cichlid vf

sienna cichlid needs one vf mode which allows vf to set and get
clock status from guest vm. So now expose the required interface
and allow some smu request on VF mode. Also since this asic blocked
direct MMIO access, use KIQ to send SMU request under sriov vf.

OD use same command as getting pp table which is not allowed for
 sienna cichlid, so remove OD feature under sriov vf.

Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Monk Liu<monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update existing gpu_metrics interfaces V2

Update the gpu_metrics interface implementations to use the latest
upgraded data structures.

V2: fit the data type change of energy_accumulator

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct gpu metrics related data structures V3

To make sure they are naturally aligned. Also updating the
data type for link_speed/width for future PCIE5 support.

V2: define new structures with minor version bumped
V3: update data type of energy_accumulator as 64bit and
    drop unnecessary padding members

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/dce/dce_aux: Remove duplicate line causing 'field overwritten' issue

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:59:
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10014:58: note: (near initialization for ‘aux_shift.AUX_SW_AUTOINCREMENT_DISABLE’)
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE__SHIFT’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:177:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:181:2: note: in expansion of macro ‘DCE_AUX_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_2_sh_mask.h:10013:56: note: (near initialization for ‘aux_mask.AUX_SW_AUTOINCREMENT_DISABLE’)
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:214:16: note: in expansion of macro ‘AUX_SW_DATA__AUX_SW_AUTOINCREMENT_DISABLE_MASK’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.h:127:2: note: in expansion of macro ‘AUX_SF’

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix off by one in hdmi_14_process_transaction()

The hdcp_i2c_offsets[] array did not have an entry for
HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one
read overflow.  I added an entry and copied the 0x0 value for the offset
from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c.

I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX
entries.  This doesn't change the code, but it's just a belt and
suspenders approach to try future proof the code.

Fixes: 4c283fdac08a ("drm/amd/display: Add HDCP module")
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix copy of uninitialized variable back to userspace

Currently the ioctl command RADEON_INFO_SI_BACKEND_ENABLED_MASK can
copy back uninitialised data in value_tmp that pointer *value points
to. This can occur when rdev->family is less than CHIP_BONAIRE and
less than CHIP_TAHITI.  Fix this by adding in a missing -EINVAL
so that no invalid value is copied back to userspace.

Addresses-Coverity: ("Uninitialized scalar variable)
Cc: stable@vger.kernel.org # 3.13+
Fixes: 439a1cfffe2c ("drm/radeon: expose render backend mask to the userspace")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct DRM_ERROR for kvmalloc_array

This may avoid debug confusion.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chen Li <chenli@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use kvmalloc for CS chunks

The number of chunks/chunks_array may be passed in
by userspace and can be large.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chen Li <chenli@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2252:40-45: WARNING: conversion
to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix parameter error of RREG32_PCIE() in amdgpu_regs_pcie

the register offset isn't needed division by 4 to pass RREG32_PCIE()

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add SECURE DISPLAY TA firmware info in debugfs

add SECUREDISPLAY TA firmware info in amdgpu_fimrware_info()

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine PSP TA firmware info print in debugfs

refine PSP TA firmware info print in amdgpu_firmware_info().

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the name of one function for vangogh

This patch is to correct the name of one function for vangogh.
This function is used to print the clock levels of all kinds of IP
components.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c:298:33-38:
WARNING: conversion to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Use kvmalloc for CS chunks

The number of chunks/chunks_array may be passed in
by userspace and can be large.

It has been observed to cause kcalloc failures from trinity fuzzy test:

 WARNING: CPU: 0 PID: 5487 at mm/page_alloc.c:4385
 __alloc_pages_nodemask+0x2d8/0x14d0

Obviously, the required order in this case is larger than MAX_ORDER.
So, just use kvmalloc instead.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chen Li <chenli@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix an uninitialized index variable

clang points out that the new logic uses an always-uninitialized
array index:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9810:38: warning: variable 'i' is uninitialized when used here [-Wuninitialized]
                        timing  = &edid->detailed_timings[i];
                                                          ^
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9720:7: note: initialize the variable 'i' to silence this warning

My best guess is that the index should have been returned by the
parse_hdmi_amd_vsdb() function that walks an array here, so do that.

Fixes: f9b4f20c4777 ("drm/amd/display: Add Freesync HDMI support to DM")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix the return of the uninitialized value in ret

Currently if stream->signal is neither SIGNAL_TYPE_DISPLAY_PORT_MST or
SIGNAL_TYPE_DISPLAY_PORT then variable ret is uninitialized and this is
checked for > 0 at the end of the function.  Ret should be initialized,
I believe setting it to zero is a correct default.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: bd0c064c161c ("drm/amd/display: Add return code instead of boolean for future use")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable BACO runpm by default on sienna cichlid and navy flounder

It works fine and was only disabled because primary GPUs
don't enter runpm if there is a console bound to the fbdev due
to the kmap.  This will at least allow runpm on secondary cards.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Only check for S0ix if AMD_PMC is configured

The S0ix check only makes sense if the AMD PMC driver is
present.  We need to use the legacy S3 pathes when the
PMC driver is not present.

Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work

amdgpu DM handles INTERRUPT_LOW_IRQ_CONTEXT interrupt(hpd, hpd_rx) by using work
queue and uses single work_struct. If new interrupt is recevied before the
previous handler finished, new interrupts(same type) will be discarded and
driver just sends "amdgpu_dm_irq_schedule_work FAILED" message out. If some
important hpd, hpd_rx related interrupts are missed by driver the hot (un)plug
devices may cause system hang or instability, such as issues with system
resume from S3 sleep with mst device connected.

This patch dynamically allocates new amdgpu_dm_irq_handler_data for new
interrupts if previous INTERRUPT_LOW_IRQ_CONTEXT interrupt work has not been
handled. So the new interrupt works can be queued to the same workqueue_struct,
instead of discard the new interrupts. All allocated amdgpu_dm_irq_handler_data
are put into a single linked list and will be reused after.

Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix 64 bit modulus operation using div64 API

[why]
Synchronization displays with different timings feature uses
reminder of 64 bit division (modulus operator) , which is not
supported by 32 bit platforms

[how]
Use div64 API for 64 bit modulus

Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Bindu Ramamurthy<bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix 64 bit divisions on 32 bit platforms by using div64 API

[why]
Synchronization displays with different timings feature uses division
operator for 64 bit division, which is not supported by 32 bit platforms

[how]
Use div64 API for 64 bit division

Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Bindu Ramamurthy<bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add missing df counter disable write

Request to stop DF performance counters is missing the actual write to the
controller register.

Reported-by: Chris Freehill <chris.freehill@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix HSplit causing increase in DSC Slice Count

[Why?]
HSplit should not affect DSC slice count. Can cause improper timings to
be applied for certain modes.

[How?]
No longer change DSC Slice count based on HSplit.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: treat memory as a single-channel for asymmetric memory

[Why]
1. Driver use umachannelnumber to calculate watermarks for stutter.
In asymmetric memory config, the actual bandwidth is less than
dual-channel. The bandwidth should be the same as single-channel.
2. We found single rank dimm need additional delay time for stutter.

[How]
Get information from each DIMM. Treat memory config as a single-channel
for asymmetric memory in bandwidth calculating. Add additional delay
time for single rank dimm.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.125

DC version 3.2.125 brings improvements in multiple areas. In summary, we
highlight:

- DSC fixes
- Enable ASSR
- Firmware relase 0.0.54
- eDP interface refactor for multiple eDP

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.54

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement dmub trace event

[Why & How]
DMUB FW send trace event via outbox0 interrupt.  Driver will handle it.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Return invalid state if GPINT times out

[Why]
GPINT timeout is causing PSR_STATE_0 to be returned when it shouldn't.
We must guarantee that PSR is fully disabled before doing hw programming
on driver-side.

[How]
Return invalid state if GPINT command times out. Let existing retry
logic send the GPINT until successful.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactored DC interfaces to support multiple eDP

[Why & How]
Some existing DC interfaces are optimized to return a single eDP
link/stream. Refactored those DC interfaces to support multiple eDP.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add max bpc debugfs

[Why]
Useful for testing when setting a max bpc value higher than the default
is required

[How]
Allow for reading/writing of the max_requested_bpc property of the
connector

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add flag for building infopacket

[why]
Add flag to build infopacket in SDP v1.3 format

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Max.Tseng <Max.Tseng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update link encoder object creation

[Why]
Currently the creation of link encoder objects is tightly coupled to the
creation of link objects. Decoupling link encoder object creation is a
preliminary step in the process of allowing link encoders to be
dynamically assigned to links.

[How]
Add "minimal" link encoder objects which are not associated with any
link until required.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Support for DMUB AUX

[WHY]
To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes.

[HOW]
1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands
   to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd
   with DCN and sends reply back in an outbox1 message triggering an
   outbox1 interrupt to driver.
2) In existing driver implementation, AUX commands are processed
   synchronously by configuring DCN reg. But in DMUB AUX, driver sends an
   inbox1 message and waits for a conditional variable (CV) which will be
   signaled by outbox1 ISR.
3) As the driver holds dal and dc locks while waiting for CV, the outbox1
   ISR is registered with noMutexWait set to true, which allows ISR to run
   and signal CV. This sets a constraint on ISR to not modify variables
   such as dc, dmub, etc.
4) Created dmub_outbox.c with dmub_enable_outbox_notification() to enable
   outbox1 mailbox.
5) New mailbox address ranges allocated for outbox1 of size DMUB_RB_SIZE.
   Created dmub functions for Outbox1: dmub_dcn20_setup_out_mailbox(),
   dmub_dcn20_get_outbox1_wptr() and dmub_dcn20_set_outbox1_rptr().
6) Added functions dc_stat_get_dmub_notification() and
   dmub_srv_stat_get_notification() to retrieve Outbox1 message.
7) Currently, DMUB doesn't opens DDC in AUX mode before issuing AUX
   transaction. A workaround is added in dce_aux_transfer_dmub_raw() to
   open in DDC in AUX mode for every AUX transaction.
8) Added dc debug option enable_dmub_aux_for_legacy_ddc enable/disable
   DMUB AUX. This debug option is checked dce_aux_transfer_with_retries()
   to select the method to process AUX transactions.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: optimize the link width/speed retrieving V2

By using the information provided by PMFW when available.

V2: put those structures shared around SMU V11 ASICs in
    smu_v11_0.h

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: bump Navi1x driver if version and related data structures V2

New changes were involved for the SmuMetrics structure.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct TA RAP firmware information print error

miss RAP TA in loop. (when i == 4)

Fix:
drm/amdgpu: add RAP TA version print in amdgpu_firmware_info

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reported-by: Candice Li <candice.li@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/dce/dmub_psr: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c:273:16-21: WARNING:
conversion to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/swsmu: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c:924:47-52:
WARNING: conversion to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unnecessary reading for epprom header

If the number of badpage records exceed the threshold, driver has
updated both epprom header and control->tbl_hdr.header before gpu reset,
therefore GPU recovery thread no need to read epprom header directly.

v2: merge amdgpu_ras_check_err_threshold into amdgpu_ras_eeprom_check_err_threshold

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: read_sensor() report failure apporpriately

report -ENOTSUPP instead of -EINVAL, so that if userspace
fails to read sensor data can figure it out the failure correctly.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct Arcturus mmTHM_BACO_CNTL register address

Arcturus has a different register address from other SMU V11
ASICs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAP TA version print in amdgpu_firmware_info

add RAP TA version print in amdgpu_firmware_info.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c:243:67-72:
WARNING: conversion to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE

Fix the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1589:0-23: WARNING:
fops_ib_preempt should be defined with DEFINE_DEBUGFS_ATTRIBUTE
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1592:0-23: WARNING:
fops_sclk_set should be defined with DEFINE_DEBUGFS_ATTRIBUTE

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/swsmu/vangogh: Only use RLCPowerNotify msg for disable

Per discussions with PMFW team, the driver only needs to
notify the PMFW when the RLC is disabled.  The RLC FW will notify
the PMFW directly when it's enabled.

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: make unsupported power profile messages debug

Making them an error confuses users and the errors are harmless
as not all asics support all profiles.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/codec: drop the internal codec index

And just use the ioctl index.  They are the same.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump driver version for new video codec INFO ioctl query

So mesa can check when to query the kernel vs use hardcoded
codec bandwidth data.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add INFO ioctl support for querying video caps (v4)

We currently hardcode these in mesa, but querying them from
the kernel makes more sense since there may be board specific
limitations that the kernel driver is better suited to
determining.

Userpace patches that use this interface:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_caps
https://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps

v2: reorder the codecs to better align with mesa
v3: add max_pixels_per_frame to handle the portrait case, squash in
    memory leak fix
v4: drop extra break

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add video decode/encode cap tables and asic callbacks (v3)

For each asic family.  Will be used to populate tables
for the new INFO ioctl query.

v2: add max_pixels_per_frame to handle the portrait case
v3: fix copy paste typos

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add asic callback for querying video codec info (v3)

This will be used by a new INFO ioctl query to fetch the decode
and encode capabilities from the kernel driver rather than
hardcoding them in mesa.  This gives us more fine grained control
of capabilities using information that is only availabl in the
kernel (e.g., platform limitations or bandwidth restrictions).

v2: reorder the codecs to better align with mesa
v3: add max_pixels_per_frame to handle the portrait case

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Skip modeset for front porch change

[Why]
A seamless transition between modes can be performed if the new incoming
mode has the same timing parameters as the optimized mode on a display with a
variable vtotal min/max.

Smooth video playback usecases can be enabled with this seamless transition by
switching to a new mode which has a refresh rate matching the video.

[How]
Skip full modeset if userspace requested a compatible freesync mode which only
differs in the front porch timing from the current mode.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add freesync video modes based on preferred modes

[Why]
While possible for userspace to create and add custom mode based off the
optimized mode for the connected display which differs only in front porch
timing, this patch set adds a list of common video modes in advance.

The list of common video refresh rates is small, well known and the optimized
mode has specific requirements to be able to enable HW frame doubling and
tripling so it makes most sense to create the modes that video players will need
in advance. The optimized mode matches the preferred mode resolution but has the
highest refresh rate available to enable the largest front porch extension.

[How]
Find the optimized mode and store it on the connector so we can check it
later during our optimized modeset.

Prepopulate the mode list with a list of common video mades based on the
optimized mode (but with a longer front porch) if the panel doesn't support a
variant of the mode natively.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add module parameter for freesync video mode

[Why]
This option shall be opt-in by default since it is a temporary solution
until long term solution is agreed upon which may require userspace interface
changes. This feature give the user a seamless experience when freesync aware
programs (media players for instance) switches to a compatible freesync mode
when playing videos. Enabling this feature also have the potential side effect
of causing higher power consumption due to running a mode with lower resolution
and base clock frequency with the highest base clock supported on the monitor as
per its advertised modes. There has been precedent of manufacturing modes in the
kernel. In AMDGPU, the existing usage are for common modes and scaling modes.
Other driver have a similar approach as well.

[How]
Adds a module parameter to enable freesync video mode modeset
optimization. Enabling this mode allows the driver to skip a full modeset when a
freesync compatible mode is requested by the userspace. This parameter will also
add some additional modes that are within the connected monitor's VRR range
corresponding to common video modes, which media players can use for a seamless
experience while making use of freesync.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove amdgpu_device arg from free_sgt api (v2)

Currently callers have to provide handle of amdgpu_device,
which is not used by the implementation. It is unlikely this
parameter will become useful in future, thus removing it

v2: squash in unused variable fix

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: move inc gpu_reset_counter after drm_sched_stop

Move gpu_reset_counter after drm_sched_stop to avoid race
condition caused by job submitted between reset_count +1 and
drm_sched_stop.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , updates to some pm functions

v3: updated to include new clocks od_vddgfx_offset, od_cclk
    Context mismatch with revision v3 to patch 0003

Modified Functions
  smu_sys_set_pp_table()        - modifed signature to match Powerplay API set_pp_table
  smu_force_performance_level() - modifed arg0 to match Powerplay API force_performance_level
  smu_od_edit_dpm_table()       - modifed arg0 to match Powerplay API odn_edit_dpm_table

Other Changes
  smu_od_edit_dpm_table()       - removed call to task(READJUST_POWER_STATE) after COMMIT_TABLE,
                                  now handled in calling function
  amdgpu_set_power_dpm_force_performance_level() - now checks thermal for swsmu systems before trying to change level
  amdgpu_set_pp_od_clk_voltage() - now attempts to set fine_grain_clock_vol before swsmu edit dpm table

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , changed 4 dpm functions to use API

v2: fix errors and warnings flagged by checkpatch
v3: Context mismatch with revision v3 to patch 0003

New Functions
  smu_get_mclk        - implementation of the Powerplay API function get_mclk
  smu_get_sclk        - implementation of the Powerplay API function get_sclk
  smu_handle_dpm_task - implementation of the Powerplay API function dispatch_tasks

Modified Functions
  smu_dpm_set_power_gate - - modifed arg0 to match Powerplay API set_powergating_by_smu

Other Changes
  removed special smu handling in dpm functions and called through Powerplay API
  call to smu_dpm_set_power_gate via Powerplay API now locks mutex for UVD and VCE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , changes to clock and profile mode functions

v3: updated to include new clocks vclk, dclk, od_vddgfx_offset, od_cclk
    Added forward declaration for function smu_force_smuclk_levels to resolve clash with other commits
    Resolved context clashes with other commits and v3 updates to patches 0003, 0004
v2: fix errors flagged by checkpatch

New Functions
  smu_bump_power_profile_mode() - changes profile mode assuming calling function already has mutex
  smu_force_ppclk_levels()      - accepts Powerplay enum pp_clock_type to specify clock to change
  smu_print_ppclk_levels()      - accepts Powerplay enum pp_clock_type to request clock levels
  amdgpu_get_pp_dpm_clock()     - accepts Powerplay enum pp_clock_type to request clock levels and allows
                                  all the amdgpu_get_pp_dpm_$CLK functions to have a single codepath
  amdgpu_set_pp_dpm_clock()     - accepts Powerplay enum pp_clock_type to set clock levels and allows
                                  all the amdgpu_set_pp_dpm_$CLK functions to have a single codepath

Modified Functions
  smu_force_smuclk_levels        - changed function name to make clear difference to smu_force_ppclk_levels
  smu_force_ppclk_levels()       - modifed signature to implement Powerplay API force_clock_level
                                 - calls smu_force_smuclk_levels
  smu_print_smuclk_levels        - changed function name to make clear difference to smu_print_ppclk_levels
  smu_print_ppclk_levels()       - modifed signature to implement Powerplay API force_clock_level
                                 - calls smu_print_smuclk_levels
  smu_sys_get_gpu_metrics        - modifed arg0 to match Powerplay API get_gpu_metrics
  smu_get_power_profile_mode     - modifed arg0 to match Powerplay API get_power_profile_mode
  smu_set_power_profile_mode     - modifed arg0 to match Powerplay API set_power_profile_mode
                                 - removed arg lock_needed, mutex always locked, internal functions
                                   can call smu_bump if they already hold lock
  smu_switch_power_profile       - now calls smu_bump as already holds mutex lock
  smu_adjust_power_state_dynamic - now calls smu_bump as already holds mutex lock
  amdgpu_get_pp_od_clk_voltage   - uses smu_print_ppclk_levels
  amdgpu_{set,get}_pp_dpm_$CLK   - replace logic with call helper function amdgpu_{set,get}_pp_dpm_clock()
                                   CLK ={sclk, mclk, socclk, fclk, dcefclk, pci, vclkd, dclk}

Other Changes
  added 5 smu Powerplay functions to swsmu_dpm_funcs
  removed special smu handling in pm functions and called through Powerplay API

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , changed 5 dpm powergating & sensor functions to use API

v2: add comment to highlight assignment that changes uint32_t value to int
    fix errors flagged by checkpatch.pl

New Functions
  smu_get_baco_capability() - Implement Powerplay API get_asic_baco_capability
  smu_baco_set_state()      - Implement Powerplay API set_asic_baco_state

Modified Functions
  smu_read_sensor() - modifed signature to match Powerplay API read_sensor

Other Changes
  added 3 above smu Powerplay functions to swsmu_dpm_funcs
  removed special smu handling in 5 dpm functions and called through Powerplay API

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , changed 9 pm power functions to use API

v2: remove check for error during swsmu amdgpu_dpm_get_pp_num_states() call to match previous powerplay behaviour
v3: removed smu implementation of powerplay get_power_limit
    Resolved context clashes with other commits

Modified Files
  smu_set_power_limit()         - modifed arg0 to match Powerplay API set_power_limit
  smu_sys_get_pp_table()        - modifed signature to match Powerplay API get_pp_table
  smu_get_power_num_states()    - modifed arg0 to match Powerplay API get_pp_num_states
  smu_get_current_power_state() - modifed arg0 to match Powerplay API get_current_power_state
  smu_sys_get_pp_feature_mask() - modifed signature to match Powerplay API get_ppfeature_status
  smu_sys_set_pp_feature_mask() - modifed arg0 to match Powerplay API set_ppfeature_status

Other Changes
  added 6 above smu Powerplay functions to swsmu_dpm_funcs
  removed special smu handling of above functions and called through Powerplay API

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , changed 6 pm hwmon fan functions to use API

v2: changed error return value of smu_get_fan_control_mode to AMD_FAN_CTRL_NONE
    fixed type in amdgpu_hwmon_get_pwm1_enable() print statement
    fixed indent flagged by checkpatch.pl

Modified Functions
  smu_set_fan_speed_rpm()     - modifed arg0 to match Powerplay API set_fan_speed_rpm
  smu_get_fan_control_mode()  - modifed signature to match Powerplay API get_fan_control_mode
  smu_set_fan_control_mode()  - modifed signature to match Powerplay API set_fan_control_mode
  smu_get_fan_speed_percent() - modifed signature to match Powerplay API get_fan_speed_percent
  smu_set_fan_speed_percent() - modifed signature to match Powerplay API set_fan_speed_percent
  smu_get_fan_speed_rpm()     - modifed arg0 to match Powerplay API get_fan_speed_rpm

Other Changes
  added 6 above smu fan Powerplay functions to swsmu_dpm_funcs
  removed special smu handling of above functions and called through Powerplay API

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , changed 6 dpm reset functions to use API

Modified Functions
  smu_set_xgmi_pstate()       - modifed arg0 to match Powerplay API set_xgmi_pstate
  smu_mode2_reset()           - modifed arg0 to match Powerplay API asic_reset_mode_2
  smu_switch_power_profile()  - modifed arg0 to match Powerplay API switch_power_profile
  smu_set_mp1_state()         - modifed arg0 to match Powerplay API set_mp1_state
  smu_set_df_cstate()         - modifed arg0 to match Powerplay API set_df_cstate
  smu_enable_mgpu_fan_boost() - modifed arg0 to match Powerplay API enable_mgpu_fan_boost

Other Changes
  added above smu reset Powerplay functions to swsmu_dpm_funcs
  removed special smu handling of above functions and called through Powerplay API

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Powerplay API for smu , added get_performance_level

v2: updated the structure name to swsmu_pm_funcs

Modified Functions
  smu_get_performance_level() - modifed arg0 to match Powerplay API get_performance_level

Other Changes
  added a new structure swsmu_dpm_funcs to hold smu functions for Powerplay API
  removed special smu handling from amdgpu_get_power_dpm_force_performance_level

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: decline max_me for mec2_fw remove in renoir/arcturus

The value of max_me in amdgpu_gfx_rlc_setup_cp_table should reduce to 4
when mec2_fw is removed on asic renoir/arcturus. Or it will cause kernel
NULL pointer when modprobe driver.

Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:disable VCN for Navi12 SKU

Navi12 0x7360/C7 SKU has no video support, so remove it.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Asher.Song <Asher.Song@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reserve backup pages for bad page retirment

To ensure user has a constant of VRAM accessible in run-time, driver
reserves limit backup pages when init, and return ones when bad pages
retired, to keep no change of unused memory size.

v2: refine codes to calculate badpags threshold

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:79:40-45: WARNING: conversion
to bool not needed here.

./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:81:40-45: WARNING: conversion
to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: initialize the variable 'i'

>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9804:38:
>> warning: variable 'i' is uninitialized when used here
>> [-Wuninitialized]
                           timing  = &edid->detailed_timings[i];
                                                             ^
   drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9714:7:
note: initialize the variable 'i' to silence this warning
           int i;
                ^
                 = 0
   1 warning generated.

Initialize the variable 'i'.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3.0: add wptr/rptr reset/update for share memory

Because of dpg, the rptr/wptr need to be saved on fw shared memory,
and restore them back in RBC_RB_RPTR/WPTR in kernel at power up.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable ASSR in DM

This patch enables ASSR if display declares such support in DPCD.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable mec2 fw bin loading

disable mec2 fw bin loading and reference on unsupported ASIC

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix wrong executable setting for dimgrey_cavefish_reg_init.c

Remove executable configuration for the file.

Reported-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix shutdown and poweroff process failed with s0ix

In the shutdown and poweroff opt on the s0i3 system we still need
un-gate the gfx clock gating and power gating before destory amdgpu device.

Fixes: 628c36d7b238e2 ("drm/amdgpu: update amdgpu device suspend/resume sequence for s0i3 support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1499
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma5.2: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1621:40-45: WARNING: conversion
to bool not needed here.

./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1619:40-45: WARNING: conversion
to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/core/dc_link_ddc: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c:544:34-39: WARNING:
conversion to bool not needed here.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/swsmu/navi1x: Remove unnecessary conversion to bool

Fix the following coccicheck warnings:

./drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c:900:47-52: WARNING:
conversion to bool not needed here.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/swsmu: Avoid using structure_size uninitialized in smu_cmn_init_soft_gpu_metrics

Clang warns:

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:764:2: warning:
variable 'structure_size' is used uninitialized whenever switch default
is taken [-Wsometimes-uninitialized]
        default:
        ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:770:23: note:
uninitialized use occurs here
        memset(header, 0xFF, structure_size);
                             ^~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:753:25: note:
initialize the variable 'structure_size' to silence this warning
        uint16_t structure_size;
                               ^
                                = 0
1 warning generated.

Return in the default case, as the size of the header will not be known.

Fixes: de4b7cd8cb87 ("drm/amd/pm/swsmu: unify the init soft gpu metrics function")
Link: https://github.com/ClangBuiltLinux/linux/issues/1304
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow spatial dither to 10 bpc on all DCE

Spatial dithering to 10 bpc depth was disabled for all DCE's.

Testing on DCE-8.3 and DCE-11.2 did not show any obvious ill
effects, but a measureable precision improvement (via colorimeter)
when displaying a fp16 framebuffer to a 10 bpc DP or HDMI connected
HDR-10 monitor.

v2: enable it for all DCEs (Alex)

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix system hang after multiple hotplugs (v3)

[Why]
mutex_lock() was introduced in dm_disable_vblank(), which could
be called in an IRQ context. Waiting in IRQ would cause issues
like kernel lockup, etc.

[How]
Handle code that requires mutex lock on a different thread.

v2: squash in compilation fix without CONFIG_DRM_AMD_DC_DCN (Alex)
v3: squash in warning fix (Wei)

Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: 3.2.124

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.53

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: reduce scope for local var

[Why]
No reason to have uninitialized var at top of function

[How]
Move it to minimum scope where it's actuallty used

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't optimize bandwidth before disabling planes

[Why]
There is a window of time where we optimize bandwidth due to no streams
enabled will enable PSTATE changing but HUBPs are not disabled yet.
This results in underflow counter increasing in some hotplug scenarios.

[How]
Set the optimize-bandwidth flag for later processing once all the HUBPs
are properly disabled.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Synchronize displays with different timings

[why]
 Vendor based fan noise improvement

[how]
Report timing synchronizable when DP streams time frame
difference is less than 0.05 percent. Adjust DP  DTOs and
sync displays using  MASTER_UPDATE_LOCK_DB_X_Y

Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move trace buffer to uncached memory.

[Why & How]
Move dmub trace buffer to uncached memory.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check for DSC support instead of ASIC revision

[why]
This check for ASIC revision is no longer useful and causes
lightup issues after a topology change in MST DSC scenario.
In this case, DSC configs should be recalculated for the new
topology. This check prevented that from happening on certain
ASICs that do, in fact, support DSC.

[how]
Change the ASIC revision to instead check if DSC is supported.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable audio on DP seamless boot

[Why]
Some external displays with DP can use seamless boot, but their audio endpoints are
only enabled after hotplug.
On boot, these displays inherit UEFI timings without properly initializing audio.

[How]
Enable display audio when seamless booting with an external monitor over DP.

Signed-off-by: Anthony Wang <anthony1.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable seamless boot for DP MST

[Why]
Seamless boot over DP MST is not POR, but is not explicitly disabled.

[How]
Add check for DP MST and return false in
dc_validate_seamless_boot_timing.

Signed-off-by: Anthony Wang <anthony1.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor debugfs entries for all connectors

[Why]
Debugfs entries being moved from DP/eDP only to be available
on all connectors are cluttering the code.

[How]
Refactor the registration of these debugfs entries.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove Assert from dcn10_get_dig_frontend

[Why]
In some cases, this function is called when DIG BE is not
connected to DIG FE, in which case a value of zero isn't
invalid and assert should not be hit.

[How]
Remove assert and handle ENGINE_ID_UNKNOWN result in calling
function.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1

When run igt@kms_vrr in a device that uses DCN2.1 architecture, we
noticed multiple failures. Furthermore, when we tested a VRR demo, we
noticed a system hang where the mouse pointer still works, but the
entire system freezes; in this case, we don't see any dmesg warning or
failure messages kernel. This happens due to a lack of vupdate_no_lock
interrupt, making the userspace wait eternally to get the event back.
For fixing this issue, we need to add the vupdate_no_lock interrupt in
the interrupt list.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused variable from struct amdgpu_bo

Fixes: 62914a99dee5a ("drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Cleanup kfd_process if init_cwsr_apu fails

If init_cwsr_apu fails, we currently leave the kfd_process structure in
place anyway. The next kfd_open will then succeed, using the existing
kfd_process structure. Fix that by cleaning up the kfd_process after a
failure in init_cwsr_apu.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use mmu_notifier_get

We use mmu_notifier_put to free the MMU notifier. That needs to be
paired with mmu_notifier_get to work correctly. Othewrise the next patch
would cause a kernel oops.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: reuse current context instead of recreating one"

This reverts commit 8866a67ab86cc0812e65c04f1ef02bcc41e24d68.

Reason for revert: This breaks hotplug of HDMI on some systems,
resulting in a blank screen. Caused general hangs on boot/hotplugs.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1487
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1492
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211649
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify bool conversion

Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:8142:16-21: WARNING:
conversion to bool not needed here

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>