ALSA: hda/hdmi: fix without unlocked before return

commit a2f647240998aa49632fb09b01388fdf2b87acfc upstream.

Fix the following coccicheck warning:
sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846

After add sanity check to pass klockwork check,
The spdif_mutex should be unlock before return true
in check_non_pcm_per_cvt().

Fixes: 960a581e22d9 ("ALSA: hda: fix some klockwork scan warnings")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID

commit 547d2c9cf4f1f72adfecacbd5b093681fb0e8b3e upstream.

The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0.

Fixes: f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter

commit ef0b3203c758b6b8abdb5dca651880347eae6b8c upstream.

This new Lenovo ThinkCenter has two front mics which can't be handled
by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change
the location for one of the mics.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200427030039.10121-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - fix the address of the last entry of S/G

commit 55b3209acbb01cb02b1ee6b1afe80d83b1aab36d upstream.

For skcipher algorithms, the input, output HW S/G tables
look like this: [IV, src][dst, IV]
Now, we can have 2 conditions here:
- there is no IV;
- src and dst are equal (in-place encryption) and scattered
and the error is an "off-by-one" in the HW S/G table.

This issue was seen with KASAN:
BUG: KASAN: slab-out-of-bounds in skcipher_edesc_alloc+0x95c/0x1018

Read of size 4 at addr ffff000022a02958 by task cryptomgr_test/321

CPU: 2 PID: 321 Comm: cryptomgr_test Not tainted
5.6.0-rc1-00165-ge4ef8383-dirty #4
Hardware name: LS1046A RDB Board (DT)
Call trace:
 dump_backtrace+0x0/0x260
 show_stack+0x14/0x20
 dump_stack+0xe8/0x144
 print_address_description.isra.11+0x64/0x348
 __kasan_report+0x11c/0x230
 kasan_report+0xc/0x18
 __asan_load4+0x90/0xb0
 skcipher_edesc_alloc+0x95c/0x1018
 skcipher_encrypt+0x84/0x150
 crypto_skcipher_encrypt+0x50/0x68
 test_skcipher_vec_cfg+0x4d4/0xc10
 test_skcipher_vec+0x178/0x1d8
 alg_test_skcipher+0xec/0x230
 alg_test.part.44+0x114/0x4a0
 alg_test+0x1c/0x60
 cryptomgr_test+0x34/0x58
 kthread+0x1b8/0x1c0
 ret_from_fork+0x10/0x18

Allocated by task 321:
 save_stack+0x24/0xb0
 __kasan_kmalloc.isra.10+0xc4/0xe0
 kasan_kmalloc+0xc/0x18
 __kmalloc+0x178/0x2b8
 skcipher_edesc_alloc+0x21c/0x1018
 skcipher_encrypt+0x84/0x150
 crypto_skcipher_encrypt+0x50/0x68
 test_skcipher_vec_cfg+0x4d4/0xc10
 test_skcipher_vec+0x178/0x1d8
 alg_test_skcipher+0xec/0x230
 alg_test.part.44+0x114/0x4a0
 alg_test+0x1c/0x60
 cryptomgr_test+0x34/0x58
 kthread+0x1b8/0x1c0
 ret_from_fork+0x10/0x18

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff000022a02800
 which belongs to the cache dma-kmalloc-512 of size 512
The buggy address is located 344 bytes inside of
 512-byte region [ffff000022a02800, ffff000022a02a00)
The buggy address belongs to the page:
page:fffffe00006a8000 refcount:1 mapcount:0 mapping:ffff00093200c400
index:0x0 compound_mapcount: 0
flags: 0xffff00000010200(slab|head)
raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00093200c400
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff000022a02800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff000022a02880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff000022a02900: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
                                                    ^
 ffff000022a02980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff000022a02a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 334d37c9e263 ("crypto: caam - update IV using HW support")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-mx-sdio: remove the broken ->card_busy() op

commit ddca1092c4324c89cf692b5efe655aa251864b51 upstream.

The recent commit 0d84c3e6a5b2 ("mmc: core: Convert to
mmc_poll_for_busy() for erase/trim/discard") makes use of the
->card_busy() op for SD cards. This uncovered that the ->card_busy() op
in the Meson SDIO driver was never working right:
while polling the busy status with ->card_busy()
meson_mx_mmc_card_busy() reads only one of the two MESON_MX_SDIO_IRQC
register values 0x1f001f10 or 0x1f003f10. This translates to "three out
of four DAT lines are HIGH" and "all four DAT lines are HIGH", which
is interpreted as "the card is busy".

It turns out that no situation can be observed where all four DAT lines
are LOW, meaning the card is not busy anymore. Upon further research the
3.10 vendor driver for this controller does not implement the
->card_busy() op.

Remove the ->card_busy() op from the meson-mx-sdio driver since it is
not working. At the time of writing this patch it is not clear what's
needed to make the ->card_busy() implementation work with this specific
controller hardware. For all use-cases which have previously worked the
MMC_CAP_WAIT_WHILE_BUSY flag is now taking over, even if we don't have
a ->card_busy() op anymore.

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200416183513.993763-3-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY

commit e53b868b3cf5beeaa2f851ec6740112bf4d6a8cb upstream.

The Meson SDIO controller uses the DAT0 lane for hardware busy
detection. Set MMC_CAP_WAIT_WHILE_BUSY accordingly. This fixes
the following error observed with Linux 5.7 (pre-rc-1):
  mmc1: Card stuck being busy! __mmc_poll_for_busy
  blk_update_request: I/O error, dev mmcblk1, sector 17111080 op
   0x3:(DISCARD) flags 0x0 phys_seg 1 prio class 0

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200416183513.993763-2-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-msm: Enable host capabilities pertains to R1b response

commit 9d8cb58691f85cef687512262acb2c7109ee4868 upstream.

MSM sd host controller is capable of HW busy detection of device busy
signaling over DAT0 line. And it requires the R1B response for commands
that have this response associated with them.

So set the below two host capabilities for qcom SDHC.
 - MMC_CAP_WAIT_WHILE_BUSY
 - MMC_CAP_NEED_RSP_BUSY

Recent development of the mmc core in regards to this, revealed this as
being a potential bug, hence the stable tag.

Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1587363626-20413-2-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers

commit 1a8eb6b373c2af6533c13d1ea11f504e5010ed9a upstream.

BIOS writers have begun the practice of setting 40 ohm eMMC driver strength
even though the eMMC may not support it, on the assumption that the kernel
will validate the value against the eMMC (Extended CSD DRIVER_STRENGTH
[offset 197]) and revert to the default 50 ohm value if 40 ohm is invalid.

This is done to avoid changing the value for different boards.

Putting aside the merits of this approach, it is clear the eMMC's mask
of supported driver strengths is more reliable than the value provided
by BIOS. Add validation accordingly.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 51ced59cc02e ("mmc: sdhci-pci: Use ACPI DSM to get driver strength for some Intel devices")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200422111629.4899-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-xenon: fix annoying 1.8V regulator warning

commit bb32e1987bc55ce1db400faf47d85891da3c9b9f upstream.

For some reason the Host Control2 register of the Xenon SDHCI controller
sometimes reports the bit representing 1.8V signaling as 0 when read
after it was written as 1. Subsequent read reports 1.

This causes the sdhci_start_signal_voltage_switch function to report
  1.8V regulator output did not become stable

When CONFIG_PM is enabled, the host is suspended and resumend many
times, and in each resume the switch to 1.8V is called, and so the
kernel log reports this message annoyingly often.

Do an empty read of the Host Control2 register in Xenon's
.voltage_switch method to circumvent this.

This patch fixes this particular problem on Turris MOX.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V...")
Cc: stable@vger.kernel.org # v4.16+
Link: https://lore.kernel.org/r/20200420080444.25242-1-marek.behun@nic.cz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop

commit b1ac62a7ac386d76968af5f374a4a7a82a35fe31 upstream.

Open-coding a timeout loop invariably leads to errors with handling
the timeout properly in one corner case or another.  In the case of
cqhci we might report "CQE stuck on" even if it wasn't stuck on.
You'd just need this sequence of events to happen in cqhci_off():

1. Call ktime_get().
2. Something happens to interrupt the CPU for > 100 us (context switch
   or interrupt).
3. Check time and; set "timed_out" to true since > 100 us.
4. Read CQHCI_CTL.
5. Both "reg & CQHCI_HALT" and "timed_out" are true, so break.
6. Since "timed_out" is true, falsely print the error message.

Rather than fixing the polling loop, use readx_poll_timeout() like
many people do.  This has been time tested to handle the corner cases.

Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200413162717.1.Idece266f5c8793193b57a1ddb1066d030c6af8e0@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info

commit fcc99734d1d4ced30167eb02e17f656735cb9928 upstream.

[BUG]
One run of btrfs/063 triggered the following lockdep warning:
  ============================================
  WARNING: possible recursive locking detected
  5.6.0-rc7-custom+ #48 Not tainted
  --------------------------------------------
  kworker/u24:0/7 is trying to acquire lock:
  ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]

  but task is already holding lock:
  ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(sb_internal#2);
    lock(sb_internal#2);

   *** DEADLOCK ***

   May be due to missing lock nesting notation

  4 locks held by kworker/u24:0/7:
   #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80
   #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80
   #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
   #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs]

  stack backtrace:
  CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
  Call Trace:
   dump_stack+0xc2/0x11a
   __lock_acquire.cold+0xce/0x214
   lock_acquire+0xe6/0x210
   __sb_start_write+0x14e/0x290
   start_transaction+0x66c/0x890 [btrfs]
   btrfs_join_transaction+0x1d/0x20 [btrfs]
   find_free_extent+0x1504/0x1a50 [btrfs]
   btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
   btrfs_alloc_tree_block+0x1ac/0x570 [btrfs]
   btrfs_copy_root+0x213/0x580 [btrfs]
   create_reloc_root+0x3bd/0x470 [btrfs]
   btrfs_init_reloc_root+0x2d2/0x310 [btrfs]
   record_root_in_trans+0x191/0x1d0 [btrfs]
   btrfs_record_root_in_trans+0x90/0xd0 [btrfs]
   start_transaction+0x16e/0x890 [btrfs]
   btrfs_join_transaction+0x1d/0x20 [btrfs]
   btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs]
   finish_ordered_fn+0x15/0x20 [btrfs]
   btrfs_work_helper+0x116/0x9a0 [btrfs]
   process_one_work+0x632/0xb80
   worker_thread+0x80/0x690
   kthread+0x1a3/0x1f0
   ret_from_fork+0x27/0x50

It's pretty hard to reproduce, only one hit so far.

[CAUSE]
This is because we're calling btrfs_join_transaction() without re-using
the current running one:

btrfs_finish_ordered_io()
|- btrfs_join_transaction() <<< Call #1
   |- btrfs_record_root_in_trans()
      |- btrfs_reserve_extent()
 |- btrfs_join_transaction() <<< Call #2

Normally such btrfs_join_transaction() call should re-use the existing
one, without trying to re-start a transaction.

But the problem is, in btrfs_join_transaction() call #1, we call
btrfs_record_root_in_trans() before initializing current::journal_info.

And in btrfs_join_transaction() call #2, we're relying on
current::journal_info to avoid such deadlock.

[FIX]
Call btrfs_record_root_in_trans() after we have initialized
current::journal_info.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix partial loss of prealloc extent past i_size after fsync

commit f135cea30de5f74d5bfb5116682073841fb4af8f upstream.

When we have an inode with a prealloc extent that starts at an offset
lower than the i_size and there is another prealloc extent that starts at
an offset beyond i_size, we can end up losing part of the first prealloc
extent (the part that starts at i_size) and have an implicit hole if we
fsync the file and then have a power failure.

Consider the following example with comments explaining how and why it
happens.

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  # Create our test file with 2 consecutive prealloc extents, each with a
  # size of 128Kb, and covering the range from 0 to 256Kb, with a file
  # size of 0.
  $ xfs_io -f -c "falloc -k 0 128K" /mnt/foo
  $ xfs_io -c "falloc -k 128K 128K" /mnt/foo

  # Fsync the file to record both extents in the log tree.
  $ xfs_io -c "fsync" /mnt/foo

  # Now do a redudant extent allocation for the range from 0 to 64Kb.
  # This will merely increase the file size from 0 to 64Kb. Instead we
  # could also do a truncate to set the file size to 64Kb.
  $ xfs_io -c "falloc 0 64K" /mnt/foo

  # Fsync the file, so we update the inode item in the log tree with the
  # new file size (64Kb). This also ends up setting the number of bytes
  # for the first prealloc extent to 64Kb. This is done by the truncation
  # at btrfs_log_prealloc_extents().
  # This means that if a power failure happens after this, a write into
  # the file range 64Kb to 128Kb will not use the prealloc extent and
  # will result in allocation of a new extent.
  $ xfs_io -c "fsync" /mnt/foo

  # Now set the file size to 256K with a truncate and then fsync the file.
  # Since no changes happened to the extents, the fsync only updates the
  # i_size in the inode item at the log tree. This results in an implicit
  # hole for the file range from 64Kb to 128Kb, something which fsck will
  # complain when not using the NO_HOLES feature if we replay the log
  # after a power failure.
  $ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo

So instead of always truncating the log to the inode's current i_size at
btrfs_log_prealloc_extents(), check first if there's a prealloc extent
that starts at an offset lower than the i_size and with a length that
crosses the i_size - if there is one, just make sure we truncate to a
size that corresponds to the end offset of that prealloc extent, so
that we don't lose the part of that extent that starts at i_size if a
power failure happens.

A test case for fstests follows soon.

Fixes: 31d11b83b96f ("Btrfs: fix duplicate extents after fsync of file with prealloc extents")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix block group leak when removing fails

commit f6033c5e333238f299c3ae03fac8cc1365b23b77 upstream.

btrfs_remove_block_group() invokes btrfs_lookup_block_group(), which
returns a local reference of the block group that contains the given
bytenr to "block_group" with increased refcount.

When btrfs_remove_block_group() returns, "block_group" becomes invalid,
so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in several exception handling paths
of btrfs_remove_block_group(). When those error scenarios occur such as
btrfs_alloc_path() returns NULL, the function forgets to decrease its
refcnt increased by btrfs_lookup_block_group() and will cause a refcnt
leak.

Fix this issue by jumping to "out_put_group" label and calling
btrfs_put_block_group() when those error scenarios occur.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix transaction leak in btrfs_recover_relocation

commit 1402d17dfd9657be0da8458b2079d03c2d61c86a upstream.

btrfs_recover_relocation() invokes btrfs_join_transaction(), which joins
a btrfs_trans_handle object into transactions and returns a reference of
it with increased refcount to "trans".

When btrfs_recover_relocation() returns, "trans" becomes invalid, so the
refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
btrfs_recover_relocation(). When read_fs_root() failed, the refcnt
increased by btrfs_join_transaction() is not decreased, causing a refcnt
leak.

Fix this issue by calling btrfs_end_transaction() on this error path
when read_fs_root() failed.

Fixes: 79787eaab461 ("btrfs: replace many BUG_ONs with proper error handling")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION

commit dff58530c4ca8ce7ee5a74db431c6e35362cf682 upstream.

Currently, if the client sends BIND_CONN_TO_SESSION with
NFS4_CDFC4_FORE_OR_BOTH but only gets NFS4_CDFS4_FORE back it ignores
that it wasn't able to enable a backchannel.

To make sure, the client sends BIND_CONN_TO_SESSION as the first
operation on the connections (ie., no other session compounds haven't
been sent before), and if the client's request to bind the backchannel
is not satisfied, then reset the connection and retry.

Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: qxl_release use after free

commit 933db73351d359f74b14f4af095808260aff11f9 upstream.

qxl_release should not be accesses after qxl_push_*_ring_release() calls:
userspace driver can process submitted command quickly, move qxl_release
into release_ring, generate interrupt and trigger garbage collector.

It can lead to crashes in qxl driver or trigger memory corruption
in some kmalloc-192 slab object

Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() +
qxl_push_{cursor,command}_ring_release() calls to close that race window.

cc: stable@vger.kernel.org
Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: qxl_release leak in qxl_hw_surface_alloc()

commit a65aa9c3676ffccb21361d52fcfedd5b5ff387d7 upstream.

Cc: stable@vger.kernel.org
Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/2e5a13ae-9ab2-5401-aa4d-03d5f5593423@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/qxl: qxl_release leak in qxl_draw_dirty_fb()

commit 85e9b88af1e6164f19ec71381efd5e2bcfc17620 upstream.

ret should be changed to release allocated struct qxl_release

Cc: stable@vger.kernel.org
Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/22cfd55f-07c8-95d0-a2f7-191b7153c3d4@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix green screen issue after suspend

commit 87b7ebc2e16c14d32a912f18206a4d6cc9abc3e8 upstream.

[why]
We have seen a green screen after resume from suspend in a Raven system
connected with two displays (HDMI and DP) on X based system. We noticed
that this issue is related to bad DCC metadata from user space which may
generate hangs and consequently an underflow on HUBP. After taking a
deep look at the code path we realized that after resume we try to
restore the commit with the DCC enabled framebuffer but the framebuffer
is no longer valid.

[how]
This problem was only reported on Raven based system and after suspend,
for this reason, this commit adds a new parameter on
fill_plane_dcc_attributes() to give the option of disabling DCC
programmatically. In summary, for disabling DCC we first verify if is a
Raven system and if it is in suspend; if both conditions are true we
disable DCC temporarily, otherwise, it is enabled.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1099
Co-developed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: Fix off-by-one in DispID DTD pixel clock

commit 6292b8efe32e6be408af364132f09572aed14382 upstream.

The DispID DTD pixel clock is documented as:
"00 00 00 h → FF FF FF h | Pixel clock ÷ 10,000 0.01 → 167,772.16 Mega Pixels per Sec"
Which seems to imply that we to add one to the raw value.

Reality seems to agree as there are tiled displays in the wild
which currently show a 10kHz difference in the pixel clock
between the tiles (one tile gets its mode from the base EDID,
the other from the DispID block).

Cc: stable@vger.kernel.org
References: https://gitlab.freedesktop.org/drm/intel/-/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423151743.18767-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: Fix SET_NAME ioctl uapi

commit a5bff92eaac45bdf6221badf9505c26792fdf99e upstream.

The uapi is the same on 32 and 64 bit, but the number isn't. Everyone
who botched this please re-read:

https://www.kernel.org/doc/html/v5.4-preprc-cpu/ioctl/botching-up-ioctls.html

Also, the type argument for the ioctl macros is for the type the void
__user *arg pointer points at, which in this case would be the
variable-sized char[] of a 0 terminated string. So this was botched in
more than just the usual ways.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: minchan@kernel.org
Cc: surenb@google.com
Cc: jenhaochen@google.com
Cc: Martin Liu <liumartin@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Martin Liu <liumartin@google.com>
Reviewed-by: Martin Liu <liumartin@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: updated some checkpatch fixes, corrected author email]
Link: https://patchwork.freedesktop.org/patch/msgid/20200407133002.3486387-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.38

Revert "ASoC: meson: axg-card: fix codec-to-codec link setup"

This reverts commit 005aa9f0af9d600d3c8fa655a4aa48e4ec7c5b9d which is
commit 1164284270779e1865cc2046a2a01b58a1e858a9 upstream.

It should not have been backported, I only looked at the "Fixes:" tag,
not the changelog text itself, my fault.

Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.37

ASoC: stm32: spdifrx: fix regmap status check

commit a168dae5ea14283e8992d5282237bb0d6a3e1c06 upstream.

Release resources when exiting on error.

Fixes: 1a5c0b28fc56 ("ASoC: stm32: spdifrx: manage identification registers")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: soc-core: disable route checks for legacy devices

commit a22ae72b86a4f754e8d25fbf9ea5a8f77365e531 upstream.

v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes,
which results in the ASoC card probe failing.

Introduce a flag to be set in machine drivers to prevent the probe
from stopping in case of incomplete topologies or missing routes. This
flag is for backwards compatibility only and shall not be used for
newer machine drivers.

Example with an HDaudio card with a bad topology:

[ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx

[ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19

with the disable_route_checks set:

[ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx

[ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: disable_route_checks set, ignoring errors on
add_routes

Fixes: daa480bde6b3a9 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200309192744.18380-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for non-zero journal inum in ext4_calculate_overhead

commit f1eec3b0d0a849996ebee733b053efa71803dad5 upstream.

While calculating overhead for internal journal, also check
that j_inum shouldn't be 0. Otherwise we get below error with
xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal
and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G             L   --------- -t - 4.18.0-167.el8.ppc64le #1
NIP:  c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4
<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0
LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0
<...>
Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

Fixes: 3c816ded78bb ("ext4: use journal inode to determine journal overhead")
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix use after free in qed_chain_free

commit 8063f761cd7c17fc1d0018728936e0c33a25388a upstream.

The qed_chain data structure was modified in
commit 1a4a69751f4d ("qed: Chain support for external PBL") to support
receiving an external pbl (due to iWARP FW requirements).
The pages pointed to by the pbl are allocated in qed_chain_alloc
and their virtual address are stored in an virtual addresses array to
enable accessing and freeing the data. The physical addresses however
weren't stored and were accessed directly from the external-pbl
during free.

Destroy-qp flow, leads to freeing the external pbl before the chain is
freed, when the chain is freed it tries accessing the already freed
external pbl, leading to a use-after-free. Therefore we need to store
the physical addresses in additional to the virtual addresses in a
new data structure.

Fixes: 1a4a69751f4d ("qed: Chain support for external PBL")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Bason <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: use indirect call wrappers for skb_copy_datagram_iter()

commit 29f3490ba9d2399d3d1b20c4aa74592d92bd4e11 upstream.

TCP recvmsg() calls skb_copy_datagram_iter(), which
calls an indirect function (cb pointing to simple_copy_to_iter())
for every MSS (fragment) present in the skb.

CONFIG_RETPOLINE=y forces a very expensive operation
that we can avoid thanks to indirect call wrappers.

This patch gives a 13% increase of performance on
a single flow, if the bottleneck is the thread reading
the TCP socket.

Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Crypto: chelsio - Fixes a hang issue during driver registration

commit ad59ddd02de26271b89564962e74d689f1a30b49 upstream.

This issue occurs only when multiadapters are present. Hang
happens because assign_chcr_device returns u_ctx pointer of
adapter which is not yet initialized as for this adapter cxgb_up
is not been called yet.

The last_dev pointer is used to determine u_ctx pointer and it
is initialized two times in chcr_uld_add in chcr_dev_add respectively.

The fix here is don't initialize the last_dev pointer during
chcr_uld_add. Only assign to value to it when the adapter's
initialization is completed i.e in chcr_dev_add.

Fixes: fef4912b66d62 ("crypto: chelsio - Handle PCI shutdown event").

Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix race condition between scheduling and destroying the slowpath workqueue

commit 3b85720d3fd72e6ef4de252cd2f67548eb645eb4 upstream.

Calling queue_delayed_work concurrently with
destroy_workqueue might race to an unexpected outcome -
scheduled task after wq is destroyed or other resources
(like ptt_pool) are freed (yields NULL pointer dereference).
cancel_delayed_work prevents the race by cancelling
the timer triggered for scheduling a new task.

Fixes: 59ccf86fe ("qed: Add driver infrastucture for handling mfw requests")
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Basson <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

taprio: do not use BIT() in TCA_TAPRIO_ATTR_FLAG_* definitions

commit 673040c3a82a7564423e09c791e242a846591e30 upstream.

BIT() macro definition is internal to the Linux kernel and is not
to be used in UAPI headers; replace its usage with the _BITUL() macro
that is already used elsewhere in the header.

Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (jc42) Fix name to have no illegal characters

[ Upstream commit c843b382e61b5f28a3d917712c69a344f632387c ]

The jc42 driver passes I2C client's name as hwmon device name. In case
of device tree probed devices this ends up being part of the compatible
string, "jc-42.4-temp". This name contains hyphens and the hwmon core
doesn't like this:

jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix

This changes the name to "jc42" which doesn't have any illegal
characters.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget

[ Upstream commit 5fe56de799ad03e92d794c7936bf363922b571df ]

If in blk_mq_dispatch_rq_list() we find no budget, then we break of the
dispatch loop, but the request may keep the driver tag, evaulated
in 'nxt' in the previous loop iteration.

Fix by putting the driver tag for that request.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: convert BUG_ON's to WARN_ON's in mballoc.c

[ Upstream commit 907ea529fc4c3296701d2bfc8b831dd2a8121a34 ]

If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover.  In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.

Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: increase wait time needed before reuse of deleted inode numbers

[ Upstream commit a17a9d935dc4a50acefaf319d58030f1da7f115a ]

Current wait times have proven to be too short to protect against inode
reuses that lead to metadata inconsistencies.

Now that we will retry the inode allocation if we can't find any
recently deleted inodes, it's a lot safer to increase the recently
deleted time from 5 seconds to a minute.

Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu
Google-Bug-Id: 36602237
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: use matching invalidatepage in ext4_writepage

[ Upstream commit c2a559bc0e7ed5a715ad6b947025b33cb7c05ea7 ]

Run generic/388 with journal data mode sometimes may trigger the warning
in ext4_invalidatepage. Actually, we should use the matching invalidatepage
in ext4_writepage.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200226041002.13914-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Delete the space separator in __emit_inst

[ Upstream commit c9a4ef66450145a356a626c833d3d7b1668b3ded ]

In assembly, many instances of __emit_inst(x) expand to a directive. In
a few places __emit_inst(x) is used as an assembler macro argument. For
example, in arch/arm64/kvm/hyp/entry.S

  ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)

expands to the following by the C preprocessor:

  alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1

Both comma and space are separators, with an exception that content
inside a pair of parentheses/quotes is not split, so the clang
integrated assembler splits the arguments to:

   nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1

GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend
(along with many other non-x86 backends) sees:

  alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
  # .inst(...) is parsed as one argument

while its x86 backend sees:

  alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
  # The extra space before '(' makes the whole .inst (...) parsed as two arguments

The non-x86 backend's behavior is considered unintentional
(https://sourceware.org/bugzilla/show_bug.cgi?id=25750).
So drop the space separator inside `.inst (...)` to make the clang
integrated assembler work.

Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/939
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix channel switch trigger from unknown mesh peer

[ Upstream commit 93e2d04a1888668183f3fb48666e90b9b31d29e6 ]

Previously mesh channel switch happens if beacon contains
CSA IE without checking the mesh peer info. Due to that
channel switch happens even if the beacon is not from
its own mesh peer. Fixing that by checking if the CSA
originated from the same mesh network before proceeding
for channel switch.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1585403604-29274-1-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: socfpga: Allow all RGMII modes

[ Upstream commit a7a0d6269652846671312b29992143f56e2866b8 ]

Allow all the RGMII modes to be used.  (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: call runtime_allow() for all hda controllers

[ Upstream commit 9a6418487b566503c772cb6e7d3d44e652b019b0 ]

Before the pci_driver->probe() is called, the pci subsystem calls
runtime_forbid() and runtime_get_sync() on this pci dev, so only call
runtime_put_autosuspend() is not enough to enable the runtime_pm on
this device.

For controllers with vgaswitcheroo feature, the pci/quirks.c will call
runtime_allow() for this dev, then the controllers could enter
rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like
Intel hda controllers, the runtime_pm is not enabled because the
runtime_allow() is not called.

Since it is no harm calling runtime_allow() twice, here let hda
driver call runtime_allow() for all controllers. Then the runtime_pm
is enabled on all controllers after the put_autosuspend() is called.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status

[ Upstream commit 6b51fd3f65a22e3d1471b18a1d56247e246edd46 ]

xenbus_map_ring_valloc() maps a ring page and returns the status of the
used grant (0 meaning success).

There are Xen hypervisors which might return the value 1 for the status
of a failed grant mapping due to a bug. Some callers of
xenbus_map_ring_valloc() test for errors by testing the returned status
to be less than zero, resulting in no error detected and crashing later
due to a not available ring page.

Set the return value of xenbus_map_ring_valloc() to GNTST_general_error
in case the grant status reported by Xen is greater than zero.

This is part of XSA-316.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Support Clang non-section symbols in ORC dump

[ Upstream commit 8782e7cab51b6bf01a5a86471dd82228af1ac185 ]

Historically, the relocation symbols for ORC entries have only been
section symbols:

  .text+0: sp:sp+8 bp:(und) type:call end:0

However, the Clang assembler is aggressive about stripping section
symbols.  In that case we will need to use function symbols:

  freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0

In preparation for the generation of such entries in "objtool orc
generate", add support for reading them in "objtool orc dump".

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings

[ Upstream commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a ]

CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an
unreachable code path.  This includes __builtin_unreachable().  Because
the BUG() macro uses __builtin_unreachable() after it emits its own UD2,
this results in a double UD2.  In this case objtool rightfully detects
that the second UD2 is unreachable:

  init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction

We weren't able to figure out a way to get rid of the double UD2s, so
just silence the warning.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN

[ Upstream commit 066f79a5fd6d1b9a5cc57b5cd445b3e4bb68a5b2 ]

In case command ring buffer becomes inconsistent, tcmu sets device flag
TCMU_DEV_BIT_BROKEN.  If the bit is set, tcmu rejects new commands from LIO
core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes
completions from the ring.  The reset_ring attribute can be used to
completely clean up the command ring, so after reset_ring the ring no
longer is inconsistent.

Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow
normal processing.

Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.com
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: fix PR IN / READ FULL STATUS for FC

[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ]

Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars
long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is
executed a last time for the ending '\0' of the string and thus hex2bin()
reports an error.

Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Explicitly permit using autosuspend if runtime PM is supported

[ Upstream commit 3ba21113bd33d49f3c300a23fc08cf114c434995 ]

This fixes runtime PM not working after a suspend-to-RAM cycle at least for
the codec-less HDA device found on NVIDIA GPUs.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Signed-off-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Keep the controller initialization even if no codecs found

[ Upstream commit 9479e75fca370a5220784f7596bf598c4dad0b9b ]

Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe.  But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM.  More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.

This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Release resources at error in delayed probe

[ Upstream commit 2393e7555b531a534152ffe7bfd1862cacedaacb ]

snd-hda-intel driver handles the most of its probe task in the delayed
work (either via workqueue or via firmware loader).  When an error
happens in the later delayed probe, we can't deregister the device
itself because the probe callback already returned success and the
device was bound.  So, for now, we set hda->init_failed flag and make
the rest untouched until the device gets really unbound.
However, this leaves the device up running, keeping the resources
without any use that prevents other operations.

In this patch, we release the resources at first when a probe error
happens in the delayed probe stage, but keeps the top-level object, so
that the PM and other ops can still refer to the object itself.

Also for simplicity, snd_hda_intel object is allocated via devm, so
that we can get rid of the explicit kfree calls.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix partially uninitialized structure in xfs_reflink_remap_extent

[ Upstream commit c142932c29e533ee892f87b44d8abc5719edceec ]

In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized.  Specifically, br_state was not
being copied from the passed-in struct to the uirec.  This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix length of dump of bad YFSFetchStatus record

[ Upstream commit 3efe55b09a92a59ed8214db801683cf13c9742c4 ]

Fix the length of the dump of a bad YFSFetchStatus record.  The function
was copied from the AFS version, but the YFS variant contains bigger fields
and extra information, so expand the dump to match.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

signal: check sig before setting info in kill_pid_usb_asyncio

[ Upstream commit eaec2b0bd30690575c581eebffae64bfb7f684ac ]

In kill_pid_usb_asyncio, if signal is not valid, we do not need to
set info struct.

Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/f525fd08-1cf7-fb09-d20c-4359145eb940@huawei.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86: hyperv: report value of misc_features

[ Upstream commit 97d9f1c43bedd400301d6f1eff54d46e8c636e47 ]

A few kernel features depend on ms_hyperv.misc_features, but unlike its
siblings ->features and ->hints, the value was never reported during boot.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: set GPR bit on suspend by DT configuration.

[ Upstream commit da722186f6549d752ea5b5fbc18111833c81a133 ]

On some SoCs, such as the i.MX6, it is necessary to set a bit
in the SoC level GPR register before suspending for wake on lan
to work.

The fec platform callback sleep_mode_enable was intended to allow this
but the platform implementation was NAK'd back in 2015 [1]

This means that, currently, wake on lan is broken on mainline for
the i.MX6 at least.

So implement the required bit setting in the fec driver by itself
by adding a new optional DT property indicating the GPR register
and adding the offset and bit information to the driver.

[1] https://www.spinics.net/lists/netdev/msg310922.html

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Initialize *nl_pid so gcc 10 is happy

[ Upstream commit 4734b0fefbbf98f8c119eb8344efa19dac82cd2c ]

Builds of Fedora's kernel-tools package started to fail with "may be
used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and
bpf_get_link_xdp_info() on the s390 architecture.

Although libbpf_netlink_open() always returns a negative number when it
does not set *nl_pid, the compiler does not determine this and thus
believes the variable might be used uninitialized. Assuage gcc's fears
by explicitly initializing nl_pid.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781

Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200404051430.698058-1-jcline@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_B

[ Upstream commit aee194b14dd2b2bde6252b3acf57d36dccfc743a ]

This patch fixes an encoding bug in emit_stx for BPF_B when the source
register is BPF_REG_FP.

The current implementation for BPF_STX BPF_B in emit_stx saves one REX
byte when the operands can be encoded using Mod-R/M alone. The lower 8
bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using
a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers,
(e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit
equivalents (%sil, %dil, %bpl, %spl).

The current code checks if the source for BPF_STX BPF_B is BPF_REG_1
or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the
required REX prefix. However, it misses the case when the source is
BPF_REG_FP (mapped to %rbp).

The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand
will read from register %ch instead of the correct %bpl. This patch fixes
the problem by fixing and refactoring the check on which registers need
the extra REX byte. Since no BPF registers map to %rsp, there is no need
to handle %spl.

Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: clear PF_MEMALLOC before exiting xfsaild thread

commit 10a98cb16d80be3595fdb165fad898bb28b8b6d2 upstream.

Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit().  That can confuse things.  In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file.  If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.

For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should.  Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.

Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.

This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:

        mkfs.xfs -f /dev/vdb
        mount /vdb
        touch /vdb/file
        chattr +S /vdb/file
        accton /vdb/file
        mkfs.xfs -f /dev/vdc
        mount /vdc
        umount /vdc

It causes:
WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
[...]
Call Trace:
 write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
 do_writepages+0x41/0xe0 mm/page-writeback.c:2344
 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
 generic_write_sync include/linux/fs.h:2867 [inline]
 xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
 call_write_iter include/linux/fs.h:1901 [inline]
 new_sync_write+0x130/0x1d0 fs/read_write.c:483
 __kernel_write+0x54/0xe0 fs/read_write.c:515
 do_acct_process+0x122/0x170 kernel/acct.c:522
 slow_acct_process kernel/acct.c:581 [inline]
 acct_process+0x1d4/0x27c kernel/acct.c:607
 do_exit+0x83d/0xbc0 kernel/exit.c:791
 kthread+0xf1/0x140 kernel/kthread.c:257
 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352

This bug was originally reported by syzbot at
https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com.

Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path

commit 94b7cc01da5a3cc4f3da5e0ff492ef008bb555d6 upstream.

Syzbot reported the below lockdep splat:

    WARNING: possible irq lock inversion dependency detected
    5.6.0-rc7-syzkaller #0 Not tainted
    --------------------------------------------------------
    syz-executor.0/10317 just changed the state of lock:
    ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
    ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: shmem_mfill_atomic_pte+0x1012/0x21c0 mm/shmem.c:2407
    but this lock was taken by another, SOFTIRQ-safe lock in the past:
     (&(&xa->xa_lock)->rlock#5){..-.}

    and interrupts could create inverse lock ordering between them.

    other info that might help us debug this:
     Possible interrupt unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&(&info->lock)->rlock);
                                   local_irq_disable();
                                   lock(&(&xa->xa_lock)->rlock#5);
                                   lock(&(&info->lock)->rlock);
      <Interrupt>
        lock(&(&xa->xa_lock)->rlock#5);

     *** DEADLOCK ***

The full report is quite lengthy, please see:

  https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2004152007370.13597@eggly.anvils/T/#m813b412c5f78e25ca8c6c7734886ed4de43f241d

It is because CPU 0 held info->lock with IRQ enabled in userfaultfd_copy
path, then CPU 1 is splitting a THP which held xa_lock and info->lock in
IRQ disabled context at the same time.  If softirq comes in to acquire
xa_lock, the deadlock would be triggered.

The fix is to acquire/release info->lock with *_irq version instead of
plain spin_{lock,unlock} to make it softirq safe.

Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Reported-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Link: http://lkml.kernel.org/r/1587061357-122619-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x86_32: Fix logic error in BPF_LDX zero-extension

commit 5ca1ca01fae1e90f8d010eb1d83374f28dc11ee6 upstream.

When verifier_zext is true, we don't need to emit code
for zero-extension.

Fixes: 836256bf5f37 ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x86_32: Fix clobbering of dst for BPF_JSET

commit 50fe7ebb6475711c15b3397467e6424e20026d94 upstream.

The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.

This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.

This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.

Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension

commit 5fa9a98fb10380e48a398998cd36a85e4ef711d6 upstream.

The current JIT uses the following sequence to zero-extend into the
upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W},
when the destination register is not on the stack:

  EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);

The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte
immediate; the current code emits only 1 byte of the immediate. This
means that the first 3 bytes of the next instruction will be treated as
the rest of the immediate, breaking the stream of instructions.

This patch fixes the problem by instead emitting "xor dst_hi,dst_hi"
to clear the upper 32 bits. This fixes the problem and is more efficient
than using MOV to load a zero immediate.

This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way, and the verifier implements a zero-extension optimization. But the
JIT should avoid emitting incorrect encodings regardless.

Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/

commit 63ec90f18204f2fe072df108de8a021b28b1b173 upstream.

In this workflow:

$ make ARCH=um defconfig && make ARCH=um -j8
  [snip]
$ make ARCH=um mrproper
  [snip]
$ make ARCH=um defconfig O=./build_um && make ARCH=um -j8 O=./build_um
  [snip]
  CC      scripts/mod/empty.o
In file included from ../include/linux/types.h:6,
                 from ../include/linux/mod_devicetable.h:12,
                 from ../scripts/mod/devicetable-offsets.c:3:
../include/uapi/linux/types.h:5:10: fatal error: asm/types.h: No such file or directory
    5 | #include <asm/types.h>
      |          ^~~~~~~~~~~~~
compilation terminated.
make[2]: *** [../scripts/Makefile.build:100: scripts/mod/devicetable-offsets.s] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/home/iha/sdb/opensource/lkmp/linux-kselftest.git/Makefile:1140: prepare0] Error 2
make[1]: Leaving directory '/home/iha/sdb/opensource/lkmp/linux-kselftest.git/build_um'
make: *** [Makefile:180: sub-make] Error 2

The cause of the error was because arch/$(SUBARCH)/include/generated files
weren't properly cleaned by `make ARCH=um mrproper`.

Fixes: a788b2ed81ab ("kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build")
Reported-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://groups.google.com/forum/#!msg/kunit-dev/QmA27YEgEgI/hvS1kiz2CwAJ
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-iocost: Fix error on iocost_ioc_vrate_adj

commit d6c8e949a35d6906d6c03a50e9a9cdf4e494528a upstream.

Systemtap 4.2 is unable to correctly interpret the "u32 (*missed_ppm)[2]"
argument of the iocost_ioc_vrate_adj trace entry defined in
include/trace/events/iocost.h leading to the following error:

  /tmp/stapAcz0G0/stap_c89c58b83cea1724e26395efa9ed4939_6321_aux_6.c:78:8:
  error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
   , u32[]* __tracepoint_arg_missed_ppm

That argument type is indeed rather complex and hard to read. Looking
at block/blk-iocost.c. It is just a 2-entry u32 array. By simplifying
the argument to a simple "u32 *missed_ppm" and adjusting the trace
entry accordingly, the compilation error was gone.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: sleep: core: Switch back to async_schedule_dev()

commit 09beebd8f93b3c8bf894e342f0a203a5c612478c upstream.

Commit 8b9ec6b73277 ("PM core: Use new async_schedule_dev command")
introduced a new function for better performance.

However commit f2a424f6c613 ("PM / core: Introduce dpm_async_fn()
helper") went back to the non-optimized version, async_schedule().

So switch back to the sync_schedule_dev() to improve performance

Fixes: f2a424f6c613 ("PM / core: Introduce dpm_async_fn() helper")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nat: fix error handling upon registering inet hook

commit b4faef1739dd1f3b3981b8bf173a2266ea86b1eb upstream.

A case of warning was reported by syzbot.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 19934 at net/netfilter/nf_nat_core.c:1106
nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 19934 Comm: syz-executor.5 Not tainted 5.6.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 panic+0x2e3/0x75c kernel/panic.c:221
 __warn.cold+0x2f/0x35 kernel/panic.c:582
 report_bug+0x27b/0x2f0 lib/bug.c:195
 fixup_bug arch/x86/kernel/traps.c:175 [inline]
 fixup_bug arch/x86/kernel/traps.c:170 [inline]
 do_error_trap+0x12b/0x220 arch/x86/kernel/traps.c:267
 do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:286
 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106
Code: ff df 48 c1 ea 03 80 3c 02 00 75 75 48 8b 44 24 10 4c 89 ef 48 c7 00 00 00 00 00 e8 e8 f8 53 fb e9 4d fe ff ff e8 ee 9c 16 fb <0f> 0b e9 41 fe ff ff e8 e2 45 54 fb e9 b5 fd ff ff 48 8b 7c 24 20
RSP: 0018:ffffc90005487208 EFLAGS: 00010246
RAX: 0000000000040000 RBX: 0000000000000004 RCX: ffffc9001444a000
RDX: 0000000000040000 RSI: ffffffff865c94a2 RDI: 0000000000000005
RBP: ffff88808b5cf000 R08: ffff8880a2620140 R09: fffffbfff14bcd79
R10: ffffc90005487208 R11: fffffbfff14bcd78 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
 nf_nat_ipv6_unregister_fn net/netfilter/nf_nat_proto.c:1017 [inline]
 nf_nat_inet_register_fn net/netfilter/nf_nat_proto.c:1038 [inline]
 nf_nat_inet_register_fn+0xfc/0x140 net/netfilter/nf_nat_proto.c:1023
 nf_tables_register_hook net/netfilter/nf_tables_api.c:224 [inline]
 nf_tables_addchain.constprop.0+0x82e/0x13c0 net/netfilter/nf_tables_api.c:1981
 nf_tables_newchain+0xf68/0x16a0 net/netfilter/nf_tables_api.c:2235
 nfnetlink_rcv_batch+0x83a/0x1610 net/netfilter/nfnetlink.c:433
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:543 [inline]
 nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:561
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362
 ___sys_sendmsg+0x100/0x170 net/socket.c:2416
 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

and to quiesce it, unregister NFPROTO_IPV6 hook instead of NFPROTO_INET
in case of failing to register NFPROTO_IPV4 hook.

Reported-by: syzbot <syzbot+33e06702fd6cffc24c40@syzkaller.appspotmail.com>
Fixes: d164385ec572 ("netfilter: nat: add inet family nat support")
Cc: Florian Westphal <fw@strlen.de>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: fix parent pid/tid in task exit events

commit f3bed55e850926614b9898fe982f66d2541a36a5 upstream.

Current logic yields the child task as the parent.

Before:
$ perf record bash -c "perf list > /dev/null"
$ perf script -D |grep 'FORK\|EXIT'
4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470)
4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472)
4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470)
                                                   ^
  Note the repeated values here -------------------/

After:
383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266)
383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266)
383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265)

Fixes: 94d5d1b2d891 ("perf_counter: Report the cloning task as parent on perf_counter_fork()")
Reported-by: KP Singh <kpsingh@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200417182842.12522-1-irogers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Fix reset-on-fork from RT with uclamp

commit eaf5a92ebde5bca3bb2565616115bd6d579486cd upstream.

uclamp_fork() resets the uclamp values to their default when the
reset-on-fork flag is set. It also checks whether the task has a RT
policy, and sets its uclamp.min to 1024 accordingly. However, during
reset-on-fork, the task's policy is lowered to SCHED_NORMAL right after,
hence leading to an erroneous uclamp.min setting for the new task if it
was forked from RT.

Fix this by removing the unnecessary check on rt_task() in
uclamp_fork() as this doesn't make sense if the reset-on-fork flag is
set.

Fixes: 1a00d999971c ("sched/uclamp: Set default clamps for RT tasks")
Reported-by: Chitti Babu Theegala <ctheegal@codeaurora.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Patrick Bellasi <patrick.bellasi@matbug.net>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20200416085956.217587-1-qperret@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix failing fw tracer allocation on s390

commit a019b36123aec9700b21ae0724710f62928a8bc1 upstream.

On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc()
allocation as done for the firmware tracer will always fail.

Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself
that copies the debug data into the trace array and there is no need for
the allocation to be contiguous in physical memory. We can therefor use
kvzalloc() instead of kzalloc() and get rid of the large contiguous
allcoation.

Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: do not set affinity for floating irqs

commit 86dbf32da150339ca81509fa2eb84c814b55258b upstream.

with the introduction of CPU directed interrupts the kernel
parameter pci=force_floating was introduced to fall back
to the previous behavior using floating irqs.

However we were still setting the affinity in that case,
both in __irq_alloc_descs() and via the irq_set_affinity
callback in struct irq_chip.

For the former only set the affinity in the directed case.

The latter is explicitly set in zpci_directed_irq_init()
so we can just leave it unset for the floating case.

Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts")
Co-developed-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabled

commit bc23d0e3f717ced21fbfacab3ab887d55e5ba367 upstream.

When the kernel is built with CONFIG_DEBUG_PER_CPU_MAPS, the cpumap code
can trigger a spurious warning if CONFIG_CPUMASK_OFFSTACK is also set. This
happens because in this configuration, NR_CPUS can be larger than
nr_cpumask_bits, so the initial check in cpu_map_alloc() is not sufficient
to guard against hitting the warning in cpumask_check().

Fix this by explicitly checking the supplied key against the
nr_cpumask_bits variable before calling cpu_possible().

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Xiumei Mu <xmu@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200416083120.453718-1-toke@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: bcm283x: Disable dsi0 node

commit 90444b958461a5f8fc299ece0fe17eab15cba1e1 upstream.

Since its inception the module was meant to be disabled by default, but
the original commit failed to add the relevant property.

Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Move Apex Edge TPU class quirk to fix BAR assignment

commit 0a8f41023e8a3c100b3dc458ed2da651bf961ead upstream.

Some Google Apex Edge TPU devices have a class code of 0
(PCI_CLASS_NOT_DEFINED).  This prevents the PCI core from assigning
resources for the Apex BARs because __dev_sort_resources() ignores
classless devices, host bridges, and IOAPICs.

On x86, firmware typically assigns those resources, so this was not a
problem.  But on some architectures, firmware does *not* assign BARs, and
since the PCI core didn't do it either, the Apex device didn't work
correctly:

  apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed
  apex 0000:01:00.0: error enabling PCI device

f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") added a
quirk to fix the class code, but it was in the apex driver, and if the
driver was built as a module, it was too late to help.

Move the quirk to the PCI core, where it will always run early enough that
the PCI core will assign resources if necessary.

Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com
Fixes: f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class")
Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
Debugged-by: Luís Mendes <luis.p.mendes@gmail.com>
Tested-by: Luis Mendes <luis.p.mendes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports

commit 299bd044a6f332b4a6c8f708575c27cad70a35c1 upstream.

Many Zhaoxin Root Ports and Switch Downstream Ports do provide ACS-like
capability but have no ACS Capability Structure.  Peer-to-Peer transactions
could be blocked between these ports, so add quirk so devices behind them
could be assigned to different IOMMU group.

Link: https://lore.kernel.org/r/20200327091148.5190-4-RaymondPang-oc@zhaoxin.com
Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add Zhaoxin Vendor ID

commit 3375590623e4a132b19a8740512f4deb95728933 upstream.

Add Zhaoxin Vendor ID to pci_ids.h

Link: https://lore.kernel.org/r/20200327091148.5190-2-RaymondPang-oc@zhaoxin.com
Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Unify ACS quirk desired vs provided checking

commit 7cf2cba43f15c74bac46dc5f0326805d25ef514d upstream.

Most of the ACS quirks have a similar pattern of:

  acs_flags &= ~( <controls provided by this device> );
  return acs_flags ? 0 : 1;

Pull this out into a helper function to simplify the quirks slightly.  The
helper function is also a convenient place for comments about what the list
of ACS controls means.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Make ACS quirk implementations more uniform

commit c8de8ed2dcaac82e5d76d467dc0b02e0ee79809b upstream.

The ACS quirks differ in needless ways, which makes them look more
different than they really are.

Reorder the ACS flags in order of definitions in the spec:

  PCI_ACS_SV   Source Validation
  PCI_ACS_TB   Translation Blocking
  PCI_ACS_RR   P2P Request Redirect
  PCI_ACS_CR   P2P Completion Redirect
  PCI_ACS_UF   Upstream Forwarding
  PCI_ACS_EC   P2P Egress Control
  PCI_ACS_DT   Direct Translated P2P

(PCIe r5.0, sec 7.7.8.2) and use similar code structure in all.  No
functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add ACS quirk for Zhaoxin multi-function devices

commit 0325837c51cb7c9a5bd3e354ac0c0cda0667d50e upstream.

Some Zhaoxin endpoints are implemented as multi-function devices without an
ACS capability, but they actually don't support peer-to-peer transactions.
Add ACS quirks to declare DMA isolation.

Link: https://lore.kernel.org/r/20200327091148.5190-3-RaymondPang-oc@zhaoxin.com
Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Avoid ASMedia XHCI USB PME# from D0 defect

commit 2880325bda8d53566dcb9725abc929eec871608e upstream.

The ASMedia USB XHCI Controller claims to support generating PME# while
in D0:

  01:00.0 USB controller: ASMedia Technology Inc. Device 2142 (prog-if 30 [XHCI])
    Subsystem: SUNIX Co., Ltd. Device 312b
    Capabilities: [78] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-

However PME# only gets asserted when plugging USB 2.0 or USB 1.1 devices,
but not for USB 3.0 devices.

Remove PCI_PM_CAP_PME_D0 to avoid using PME under D0.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205919
Link: https://lore.kernel.org/r/20191219192006.16270-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Get the latest values from counters in switchdev mode

commit dcdf4ce0ff4ba206fc362e149c8ae81d6a2f849c upstream.

In the switchdev mode, when running "cat
/sys/class/net/NIC/statistics/tx_packets", the ppcnt register is
accessed to get the latest values. But currently this command can
not get the correct values from ppcnt.

From firmware manual, before getting the 802_3 counters, the 802_3
data layout should be set to the ppcnt register.

When the command "cat /sys/class/net/NIC/statistics/tx_packets" is
run, before updating 802_3 data layout with ppcnt register, the
monitor counters are tested. The test result will decide the
802_3 data layout is updated or not.

Actually the monitor counters do not support to monitor rx/tx
stats of 802_3 in switchdev mode. So the rx/tx counters change
will not trigger monitor counters. So the 802_3 data layout will
not be updated in ppcnt register. Finally this command can not get
the latest values from ppcnt register with 802_3 data layout.

Fixes: 5c7e8bbb0257 ("net/mlx5e: Use monitor counters for update stats")
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overruns

commit e7e0004abdd6f83ae4be5613b29ed396beff576c upstream.

XSK wakeup function triggers NAPI by posting a NOP WQE to a special XSK
ICOSQ. When the application floods the driver with wakeup requests by
calling sendto() in a certain pattern that ends up in mlx5e_trigger_irq,
the XSK ICOSQ may overflow.

Multiple NOPs are not required and won't accelerate the process, so
avoid posting a second NOP if there is one already on the way. This way
we also avoid increasing the queue size (which might not help anyway).

Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svcrdma: Fix leak of svc_rdma_recv_ctxt objects

commit 23cf1ee1f1869966b75518c59b5cbda4c6c92450 upstream.

Utilize the xpo_release_rqst transport method to ensure that each
rqstp's svc_rdma_recv_ctxt object is released even when the server
cannot return a Reply for that rqstp.

Without this fix, each RPC whose Reply cannot be sent leaks one
svc_rdma_recv_ctxt. This is a 2.5KB structure, a 4KB DMA-mapped
Receive buffer, and any pages that might be part of the Reply
message.

The leak is infrequent unless the network fabric is unreliable or
Kerberos is in use, as GSS sequence window overruns, which result
in connection loss, are more common on fast transports.

Fixes: 3a88092ee319 ("svcrdma: Preserve Receive buffer until svc_rdma_sendto")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svcrdma: Fix trace point use-after-free race

commit e28b4fc652c1830796a4d3e09565f30c20f9a2cf upstream.

I hit this while testing nfsd-5.7 with kernel memory debugging
enabled on my server:

Mar 30 13:21:45 klimt kernel: BUG: unable to handle page fault for address: ffff8887e6c279a8
Mar 30 13:21:45 klimt kernel: #PF: supervisor read access in kernel mode
Mar 30 13:21:45 klimt kernel: #PF: error_code(0x0000) - not-present page
Mar 30 13:21:45 klimt kernel: PGD 3601067 P4D 3601067 PUD 87c519067 PMD 87c3e2067 PTE 800ffff8193d8060
Mar 30 13:21:45 klimt kernel: Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
Mar 30 13:21:45 klimt kernel: CPU: 2 PID: 1933 Comm: nfsd Not tainted 5.6.0-rc6-00040-g881e87a3c6f9 #1591
Mar 30 13:21:45 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015
Mar 30 13:21:45 klimt kernel: RIP: 0010:svc_rdma_post_chunk_ctxt+0xab/0x284 [rpcrdma]
Mar 30 13:21:45 klimt kernel: Code: c1 83 34 02 00 00 29 d0 85 c0 7e 72 48 8b bb a0 02 00 00 48 8d 54 24 08 4c 89 e6 48 8b 07 48 8b 40 20 e8 5a 5c 2b e1 41 89 c6 <8b> 45 20 89 44 24 04 8b 05 02 e9 01 00 85 c0 7e 33 e9 5e 01 00 00
Mar 30 13:21:45 klimt kernel: RSP: 0018:ffffc90000dfbdd8 EFLAGS: 00010286
Mar 30 13:21:45 klimt kernel: RAX: 0000000000000000 RBX: ffff8887db8db400 RCX: 0000000000000030
Mar 30 13:21:45 klimt kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000246
Mar 30 13:21:45 klimt kernel: RBP: ffff8887e6c27988 R08: 0000000000000000 R09: 0000000000000004
Mar 30 13:21:45 klimt kernel: R10: ffffc90000dfbdd8 R11: 00c068ef00000000 R12: ffff8887eb4e4a80
Mar 30 13:21:45 klimt kernel: R13: ffff8887db8db634 R14: 0000000000000000 R15: ffff8887fc931000
Mar 30 13:21:45 klimt kernel: FS:  0000000000000000(0000) GS:ffff88885bd00000(0000) knlGS:0000000000000000
Mar 30 13:21:45 klimt kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 CR3: 000000081b72e002 CR4: 00000000001606e0
Mar 30 13:21:45 klimt kernel: Call Trace:
Mar 30 13:21:45 klimt kernel: ? svc_rdma_vec_to_sg+0x7f/0x7f [rpcrdma]
Mar 30 13:21:45 klimt kernel: svc_rdma_send_write_chunk+0x59/0xce [rpcrdma]
Mar 30 13:21:45 klimt kernel: svc_rdma_sendto+0xf9/0x3ae [rpcrdma]
Mar 30 13:21:45 klimt kernel: ? nfsd_destroy+0x51/0x51 [nfsd]
Mar 30 13:21:45 klimt kernel: svc_send+0x105/0x1e3 [sunrpc]
Mar 30 13:21:45 klimt kernel: nfsd+0xf2/0x149 [nfsd]
Mar 30 13:21:45 klimt kernel: kthread+0xf6/0xfb
Mar 30 13:21:45 klimt kernel: ? kthread_queue_delayed_work+0x74/0x74
Mar 30 13:21:45 klimt kernel: ret_from_fork+0x3a/0x50
Mar 30 13:21:45 klimt kernel: Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue ib_umad ib_ipoib mlx4_ib sb_edac x86_pkg_temp_thermal iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel glue_helper crypto_simd cryptd pcspkr rpcrdma i2c_i801 rdma_ucm lpc_ich mfd_core ib_iser rdma_cm iw_cm ib_cm mei_me raid0 libiscsi mei sg scsi_transport_iscsi ioatdma wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter nfsd nfs_acl lockd auth_rpcgss grace sunrpc ip_tables xfs libcrc32c mlx4_en sd_mod sr_mod cdrom mlx4_core crc32c_intel igb nvme i2c_algo_bit ahci i2c_core libahci nvme_core dca libata t10_pi qedr dm_mirror dm_region_hash dm_log dm_mod dax qede qed crc8 ib_uverbs ib_core
Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8
Mar 30 13:21:45 klimt kernel: ---[ end trace 87971d2ad3429424 ]---

It's absolutely not safe to use resources pointed to by the @send_wr
argument of ib_post_send() _after_ that function returns. Those
resources are typically freed by the Send completion handler, which
can run before ib_post_send() returns.

Thus the trace points currently around ib_post_send() in the
server's RPC/RDMA transport are a hazard, even when they are
disabled. Rearrange them so that they touch the Work Request only
_before_ ib_post_send() is invoked.

Fixes: bd2abef33394 ("svcrdma: Trace key RDMA API events")
Fixes: 4201c7464753 ("svcrdma: Introduce svc_rdma_send_ctxt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: acquire superblock freeze protection on eofblocks scans

commit 4b674b9ac852937af1f8c62f730c325fb6eadcdb upstream.

The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.

Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.

Fixes: d6b636ebb1c9f ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: Paul Furtado <paulfurtado91@gmail.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/cxgb4: Check the return from t4_query_params properly

commit c799fca8baf18d1bbbbad6c3b736eefbde8bdb90 upstream.

Positive return values are also failures that don't set val,
although this probably can't happen. Fixes gcc 10 warning:

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
 3747 |  *phy_fw_ver = val;

Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix DATA Tx to disable nofrag for UDP on AF_INET6 socket

commit 0e631eee17dcea576ab922fa70e4fdbd596ee452 upstream.

Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6
socket as well as UDPv6 when trying to transmit fragmentably.

Without this, packets filled to the normal size used by the kernel AFS
client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE
immediately.  The ->sk_error_report() notification hook is called, but
rxrpc doesn't generate a trace for it.

This is a temporary fix; a more permanent solution needs to involve
changing the size of the packets being filled in accordance with the MTU,
which isn't currently done in AF_RXRPC.  The reason for not doing so was
that, barring the last packet in an rx jumbo packet, jumbos can only be
assembled out of 1412-byte packets - and the plan was to construct jumbos
on the fly at transmission time.

Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to
engage in this anyway since fragmentation is only done by the sender.  We
can then condense the switch-statement in rxrpc_send_data_packet().

Fixes: 75b54cb57ca3 ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: altera: use proper variable to hold errno

commit edb2c9dd3948738ef030c32b948543e84f4d3f81 upstream.

device_property_read_u32() returns errno or 0, so we should use the
integer variable 'ret' and not the u32 'val' to hold the retval.

Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Forbid XADD on spilled pointers for unprivileged users

commit 6e7e63cbb023976d828cdb22422606bf77baa8a9 upstream.

When check_xadd() verifies an XADD operation on a pointer to a stack slot
containing a spilled pointer, check_stack_read() verifies that the read,
which is part of XADD, is valid. However, since the placeholder value -1 is
passed as `value_regno`, check_stack_read() can only return a binary
decision and can't return the type of the value that was read. The intent
here is to verify whether the value read from the stack slot may be used as
a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
the type information is lost when check_stack_read() returns, this is not
enforced, and a malicious user can abuse XADD to leak spilled kernel
pointers.

Fix it by letting check_stack_read() verify that the value is usable as a
SCALAR_VALUE if no type information is passed to the caller.

To be able to use __is_pointer_value() in check_stack_read(), move it up.

Fix up the expected unprivileged error message for a BPF selftest that,
until now, assumed that unprivileged users can use XADD on stack-spilled
pointers. This also gives us a test for the behavior introduced in this
patch for free.

In theory, this could also be fixed by forbidding XADD on stack spills
entirely, since XADD is a locked operation (for operations on memory with
concurrency) and there can't be any concurrency on the BPF stack; but
Alexei has said that he wants to keep XADD on stack slots working to avoid
changes to the test suite [1].

The following BPF program demonstrates how to leak a BPF map pointer as an
unprivileged user using this bug:

    // r7 = map_pointer
    BPF_LD_MAP_FD(BPF_REG_7, small_map),
    // r8 = launder(map_pointer)
    BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
    BPF_MOV64_IMM(BPF_REG_1, 0),
    ((struct bpf_insn) {
      .code  = BPF_STX | BPF_DW | BPF_XADD,
      .dst_reg = BPF_REG_FP,
      .src_reg = BPF_REG_1,
      .off = -8
    }),
    BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),

    // store r8 into map
    BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
    BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
    BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
    BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
    BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
    BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
    BPF_EXIT_INSN(),
    BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),

    BPF_MOV64_IMM(BPF_REG_0, 0),
    BPF_EXIT_INSN()

[1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/

Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: memory corruption in nfsd4_lock()

commit e1e8399eee72e9d5246d4d1bcacd793debe34dd3 upstream.

New struct nfsd4_blocked_lock allocated in find_or_allocate_block()
does not initialized nbl_list and nbl_lru.
If conflock allocation fails rollback can call list_del_init()
access uninitialized fields and corrupt memory.

v2: just initialize nbl_list and nbl_lru right after nbl allocation.

Fixes: 76d348fadff5 ("nfsd: have nfsd4_lock use blocking locks for v4.1+ lock")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: soc: xilinx: fix firmware driver Kconfig dependency

commit d0384eedcde21276ac51f57c641f875605024b32 upstream.

The firmware driver is optional, but the power driver depends on it,
which needs to be reflected in Kconfig to avoid link errors:

aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'

The firmware driver can probably be allowed for compile-testing as
well, so it's best to drop the dependency on the ZYNQ platform
here and allow building as long as the firmware code is built-in.

Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8960: Fix wrong clock after suspend & resume

commit 1e060a453c8604311fb45ae2f84f67ed673329b4 upstream.

After suspend & resume, wm8960_hw_params may be called when
bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking
is not called. But if sample rate is changed at that time, then
the output clock rate will be not correct.

So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params
is not necessary and it causes above issue.

Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1587468525-27514-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: meson: axg-card: fix codec-to-codec link setup

commit 1164284270779e1865cc2046a2a01b58a1e858a9 upstream.

Since the addition of commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
  Internal error: Oops: 96000044 [#1] PREEMPT SMP
  CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
  pc : invalidate_paths_ep+0x30/0xe0
  lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
  Call trace:
   invalidate_paths_ep+0x30/0xe0
   snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
   dpcm_path_get+0x38/0xd0
   dpcm_fe_dai_open+0x70/0x920
   snd_pcm_open_substream+0x564/0x840
   snd_pcm_open+0xfc/0x228
   snd_pcm_capture_open+0x4c/0x78
   snd_open+0xac/0x1a8
   ...

While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.

Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.

Fixes: 0a8f1117a680 ("ASoC: meson: axg-card: add basic codec-to-codec link support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas571x: disable regulators on failed probe

commit 9df8ba7c63073508e5aa677dade48fcab6a6773e upstream.

If probe fails after enabling the regulators regulator_put is called for
each supply without having them disabled before. This produces some
warnings like

WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c
[<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14)
[<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4)
[<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4)
[<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c)
[<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38)
[<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38)
[<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c)
[<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c)
[<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c)
[<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60)
[<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc)
[<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0)
[<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0)
[<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108)
[<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88)
[<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250)
[<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244)
[<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540)
[<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8)
[<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)

Fixes: 3fd6e7d9a146 (ASoC: tas571x: New driver for TI TAS571x power amplifiers)
Signed-off-by: Philipp Puschmann <p.puschmann@pironex.de>
Link: https://lore.kernel.org/r/20200414112754.3365406-1-p.puschmann@pironex.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: q6dsp6: q6afe-dai: add missing channels to MI2S DAIs

commit 0c824ec094b5cda766c80d88c2036e28c24a4cb1 upstream.

For some reason, the MI2S DAIs do not have channels_min/max defined.
This means that snd_soc_dai_stream_valid() returns false,
i.e. the DAIs have neither valid playback nor capture stream.

It's quite surprising that this ever worked correctly,
but in 5.7-rc1 this is now failing badly: :)

Commit 0e9cf4c452ad ("ASoC: pcm: check if cpu-dai supports a given stream")
introduced a check for snd_soc_dai_stream_valid() before calling
hw_params(), which means that the q6i2s_hw_params() function
was never called, eventually resulting in:

    qcom-q6afe aprsvc:q6afe:4:4: no line is assigned

... even though "qcom,sd-lines" is set in the device tree.

Commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
now even avoids creating PCM devices if the stream is not supported,
which means that it is failing even earlier with e.g.:

    Primary MI2S: ASoC: no backend playback stream

Avoid all that trouble by adding channels_min/max for the MI2S DAIs.

Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ftrace: fix potential crashes when switching tracers

commit 8ebf6da9db1b2a20bb86cc1bee2552e894d03308 upstream.

Switching tracers include instruction patching. To prevent that a
instruction is patched while it's read the instruction patching is done
in stop_machine 'context'. This also means that any function called
during stop_machine must not be traced. Thus add 'notrace' to all
functions called within stop_machine.

Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine")
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter: 104-quad-8: Add lock guards - generic interface

commit fc069262261c43ed11d639dadcf982e79bfe652b upstream.

Add lock protection from race conditions to 104-quad-8 counter driver
generic interface code changes. Mutex calls used for protection.

Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support")

Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

propagate_one(): mnt_set_mountpoint() needs mount_lock

commit b0d3869ce9eeacbb1bbd541909beeef4126426d5 upstream.

... to protect the modification of mp->m_count done by it.  Most of
the places that modify that thing also have namespace_lock held,
but not all of them can do so, so we really need mount_lock here.
Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related
bug in pivot_root(2) (fixed unnoticed in 5.3); search for other
similar turds has caught out this one.

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:ad7797: Use correct attribute_group

commit 28535877ac5b2b84f0d394fd67a5ec71c0c48b10 upstream.

It should use ad7797_attribute_group in ad7797_info,
according to commit ("iio:ad7793: Add support for the ad7796 and ad7797").

Scale is fixed for the ad7796 and not programmable, hence
should not have the scale_available attribute.

Fixes: fd1a8b912841 ("iio:ad7793: Add support for the ad7796 and ad7797")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix to actually set AFS_SERVER_FL_HAVE_EPOCH

commit 69cf3978f3ada4e54beae4ad44868b5627864884 upstream.

AFS keeps track of the epoch value from the rxrpc protocol to note (a) when
a fileserver appears to have restarted and (b) when different endpoints of
a fileserver do not appear to be associated with the same fileserver
(ie. all probes back from a fileserver from all of its interfaces should
carry the same epoch).

However, the AFS_SERVER_FL_HAVE_EPOCH flag that indicates that we've
received the server's epoch is never set, though it is used.

Fix this to set the flag when we first receive an epoch value from a probe
sent to the filesystem client from the fileserver.

Fixes: 3bf0fb6f33dd ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Make record checking use TASK_UNINTERRUPTIBLE when appropriate

commit c4bfda16d1b40d1c5941c61b5aa336bdd2d9904a upstream.

When an operation is meant to be done uninterruptibly (such as
FS.StoreData), we should not be allowing volume and server record checking
to be interrupted.

Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: atmel: Fix vbus disconnect handling

commit 12b94da411f9c6d950beb067d913024fd5617a61 upstream.

A DMA transfer can be in progress while vbus is lost due to a cable
disconnect. For endpoints that use DMA, this condition can lead to
peripheral hang. The patch ensures that endpoints are disabled before
the clocks are stopped to prevent this issue.

Fixes: a64ef71ddc13 ("usb: gadget: atmel_usba_udc: condition clocks to vbus state")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>