Merge tag 'drm-misc-next-fixes-2022-03-24-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next-fixes for v5.18-rc1:
- Make audio and color plane support checking only happen
  when a CEA extension block is found.
- Fix a small regression from ttm_resource_fini()
- Small selftest fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fafe7517-fb98-4992-e059-88429ac488bc@linux.intel.com

Merge tag 'drm-intel-next-fixes-2022-03-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Reject unsupported TMDS rates on ICL+ (Ville Syrjälä)
- Treat SAGV block time 0 as SAGV disabled (Ville Syrjälä)
- Fix PSF GV point mask when SAGV is not possible (Ville Syrjälä)
- Fix renamed INTEL_INFO->media.arch/ver field (Lucas De Marchi)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YjwvgGzYNAX5rxHN@tursulin-mobl2

drm/edid: fix CEA extension byte #3 parsing

Only an EDID CEA extension has byte #3, while the CTA DisplayID Data
Block does not. Don't interpret bogus data for color formats.

For most displays it's probably an unlikely scenario you'd have a CTA
DisplayID Data Block without a CEA extension, but they do exist.

Fixes: e28ad544f462 ("drm/edid: parse CEA blocks embedded in DisplayID")
Cc: <stable@vger.kernel.org>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323100438.1757295-1-jani.nikula@intel.com

drm/edid: check basic audio support on CEA extension block

Tag code stored in bit7:5 for CTA block byte[3] is not the same as
CEA extension block definition. Only check CEA block has
basic audio support.

v3: update commit message.

Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Signed-off-by: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: e28ad544f462 ("drm/edid: parse CEA blocks embedded in DisplayID")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324061218.32739-1-shawn.c.lee@intel.com

drm/i915: Fix renamed struct field

Earlier versions of commit a5b7ef27da60 ("drm/i915: Add struct to hold
IP version") named "ver" as "arch" and then when it was renamed it
missed the rename on MEDIA_VER_FULL() since it it's currently not used.

Fixes: a5b7ef27da60 ("drm/i915: Add struct to hold IP version")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-1-lucas.demarchi@intel.com
(cherry picked from commit b4ac33b973233dc08a56c8ef9d3c2edeab7a4370)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Fix PSF GV point mask when SAGV is not possible

Don't just mask off all the PSF GV points when SAGV gets disabled.
This should in fact cause the Pcode to reject the request since
at least one PSF point must remain enabled at all times.

Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 0fed4ddd18f064d2359b430c6e83ee60dd1f49b1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Treat SAGV block time 0 as SAGV disabled

For modern platforms the spec explicitly states that a
SAGV block time of zero means that SAGV is not supported.
Let's extend that to all platforms. Supposedly there should
be no systems where this isn't true, and it'll allow us to:
- use the same code regardless of older vs. newer platform
- wm latencies already treat 0 as disabled, so this fits well
  with other related code
- make it a bit more clear when SAGV is used vs. not
- avoid overflows from adding U32_MAX with a u16 wm0 latency value
  which could cause us to miscalculate the SAGV watermarks on tgl+

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit d8f5855b31c0523ea3b171db8dfb998830e8735d)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Reject unsupported TMDS rates on ICL+

ICL+ PLLs can't genenerate certain frequencies. Running the PLL
algorithms through for all frequencies 25-594MHz we see a gap just
above 500 MHz. Specifically 500-522.8MHZ for TC PLLs, and 500-533.2
MHz for combo PHY PLLs. Reject those frequencies hdmi_port_clock_valid()
so that we properly filter out unsupported modes and/or color depths
for HDMI.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5247
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311212845.32358-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit e5086cb3f3d3f94091be29eec38cf13f8a75a778)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/selftest: plane_helper: Put test structures in static storage

Clang warns on certain 32-bit architectures:

  drivers/gpu/drm/selftests/test-drm_plane_helper.c:76:5: warning: stack frame size (1064) exceeds limit (1024) in 'igt_check_plane_state' [-Wframe-larger-than]
  int igt_check_plane_state(void *ignored)
      ^
  1 warning generated.

The structures in igt_check_plane_state() total 1008 bytes, so any small
amount of inlining will cause the stack frame to exceed the 32-bit limit
of 1024, triggering the warning.

Move these structures to static storage, which dramatically reduces the
amount of stack space in igt_check_plane_state(). There is no testing
impact, as igt_check_plane_state() is only called once in the driver.

Fixes: 943e6a8beeac ("mock a drm_plane in igt_check_plane_state to make the test more robust")
Link: https://github.com/ClangBuiltLinux/linux/issues/1600
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302235909.784935-1-nathan@kernel.org

drm/ttm: Fix a kernel oops due to an invalid read

The res is initialized here only if there's no errors so passing it to
ttm_resource_fini in the error paths results in a kernel oops. In the
error paths, instead of the unitialized res, we have to use to use
node->base on which ttm_resource_init was called.

Sample affected backtrace:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d8
 Mem abort info:
   ESR = 0x96000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x04: level 0 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000106ac0000
 [00000000000000d8] pgd=0000000000000000, p4d=0000000000000000
 Internal error: Oops: 96000004 [#1] SMP
 Modules linked in: bnep vsock_loopback vmw_vsock_virtio_transport_common
 vsock snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_hda_codec
 snd_hwdep >
 CPU: 0 PID: 1197 Comm: gnome-shell Tainted: G    U  5.17.0-rc2-vmwgfx #2
 Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020
 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : ttm_resource_fini+0x5c/0xac [ttm]
 lr : ttm_range_man_alloc+0x128/0x1e0 [ttm]
 sp : ffff80000d783510
 x29: ffff80000d783510 x28: 0000000000000000 x27: ffff000086514400
 x26: 0000000000000300 x25: ffff0000809f9e78 x24: 0000000000000000
 x23: ffff80000d783680 x22: ffff000086514400 x21: 00000000ffffffe4
 x20: ffff80000d7836a0 x19: ffff0000809f9e00 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
 x14: 0000000000000000 x13: 0000000000000800 x12: ffff0000f2600a00
 x11: 000000000000fc96 x10: 0000000000000000 x9 : ffff800001295c18
 x8 : 0000000000000000 x7 : 0000000000000300 x6 : 0000000000000000
 x5 : 0000000000000000 x4 : ffff0000f1034e20 x3 : ffff0000f1034600
 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000600000
 Call trace:
  ttm_resource_fini+0x5c/0xac [ttm]
  ttm_range_man_alloc+0x128/0x1e0 [ttm]
  ttm_resource_alloc+0x58/0x90 [ttm]
  ttm_bo_mem_space+0xc8/0x3e4 [ttm]
  ttm_bo_validate+0xb4/0x134 [ttm]
  vmw_bo_pin_in_start_of_vram+0xbc/0x200 [vmwgfx]
  vmw_framebuffer_pin+0xc0/0x154 [vmwgfx]
  vmw_ldu_primary_plane_atomic_update+0x8c/0x6e0 [vmwgfx]
  drm_atomic_helper_commit_planes+0x11c/0x2e0
  drm_atomic_helper_commit_tail+0x60/0xb0
  commit_tail+0x1b0/0x210
  drm_atomic_helper_commit+0x168/0x400
  drm_atomic_commit+0x64/0x74
  drm_atomic_helper_set_config+0xdc/0x11c
  drm_mode_setcrtc+0x1c4/0x780
  drm_ioctl_kernel+0xd0/0x1a0
  drm_ioctl+0x2c4/0x690
  vmw_generic_ioctl+0xe0/0x174 [vmwgfx]
  vmw_unlocked_ioctl+0x24/0x30 [vmwgfx]
  __arm64_sys_ioctl+0xb4/0x100
  invoke_syscall+0x78/0x100
  el0_svc_common.constprop.0+0x54/0x184
  do_el0_svc+0x34/0x9c
  el0_svc+0x48/0x1b0
  el0t_64_sync_handler+0xa4/0x130
  el0t_64_sync+0x1a4/0x1a8
 Code: 35000260 f9401a81 52800002 f9403a60 (f9406c23)
 ---[ end trace 0000000000000000 ]---

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: de3688e469b0 ("drm/ttm: add ttm_resource_fini v2")
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-6-zack@kde.org

Merge tag 'amd-drm-next-5.18-2022-03-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.18-2022-03-18:

amdgpu:
- Aldebaran fixes
- SMU 13.0.5 fixes
- DCN 3.1.5 fixes
- DCN 3.1.6 fixes
- Pipe split fixes
- More display FP cleanup
- DP 2.0 UHBR fix
- DC GPU reset fix
- DC deep color ratio fix
- SMU robustness fixes
- Runtime PM fix for APUs
- IGT reload fixes
- SR-IOV fix
- Misc fixes and cleanups

amdkfd:
- CRIU fixes
- SVM fixes

UAPI:
- Properly handle SDMA transfers with CRIU
  Proposed user mode change: https://github.com/checkpoint-restore/criu/pull/1709

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318203717.5833-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2022-03-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Do not re-enable PSR after it was marked as not reliable (Jose)
- Add missing boundary check in vm_access to avoid out-of-bounds access (Mastan)
- Naming fix for HPD short pulse handling for eDP (Jose)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YjLnofpe5sMHX7Pt@jlahtine-mobl.ger.corp.intel.com

drm/i915/display: Do not re-enable PSR after it was marked as not reliable

If a error happens and sink_not_reliable is set, PSR should be disabled
for good but that is not happening.
It would be disabled by the function handling the PSR error but then
on the next fastset it would be enabled again in
_intel_psr_post_plane_update().
It would only be disabled for good in the next modeset where has_psr
will be set false.

v2:
- release psr lock before continue

Fixes: 9ce5884e5139 ("drm/i915/display: Only keep PSR enabled if there is active planes")
Reported-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reported-by: Charlton Lin <charlton.lin@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-2-jose.souza@intel.com
(cherry picked from commit 15f26bdc81f7f03561aaea5a10d87bd6638e1459)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/display: Fix HPD short pulse handling for eDP

Commit 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel
powered off") completely broke short pulse handling for eDP as it is
usually generated by sink when it is displaying image and there is
some error or status that source needs to handle.

When power panel is enabled, this state is enough to power aux
transactions and VDD override is disabled, so intel_pps_have_power()
is always returning false causing short pulses to be ignored.

So here better naming this function that intends to check if aux
lines are powered to avoid the endless cycle mentioned in the commit
being fixed and fixing the check for what it is intended.

v2:
- renamed to intel_pps_have_panel_power_or_vdd()
- fixed indentation

Fixes: 13ea6db2cf24 ("drm/i915/edp: Ignore short pulse when panel powered off")
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311185149.110527-1-jose.souza@intel.com
(cherry picked from commit 8f0c1c0949b609acfad62b8d5f742a3b5e7b05ab)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/amdgpu: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Use drm_mode_copy()

struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.

Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.

Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.

@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}

@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)

@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)

@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`

Remove the boilerplate of declaring a variable and using an if else
statement by using the ternary operator.

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove pointless on stack mode copies

These on stack copies of the modes appear to be pointless.
Just look at the originals directly.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Nikola Cornij <nikola.cornij@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()

Smatch complains that the dev_err_ratelimited() is indented one tab more
than the surrounding lines.

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:174
__smu_cmn_reg_print_error() warn: inconsistent indenting

It looks like it's not a bug, just that the indenting needs to be cleaned
up.

Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.

MI25 SRIOV guest driver loading failed due to allocated memory overlaps
with firmware reserved area.
Allocate stolen reserved memory for MI25 SRIOV specifically to avoid the
memory overlap.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.

Some ASICs need reserved memory for firmware or other components,
which is not allowed to be used by driver.
amdgpu_gmc_get_reserved_allocation is to handle additional areas.
To avoid any missing calling,
merged amdgpu_gmc_get_reserved_allocation to
amdgpu_gmc_get_vbios_allocations.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: evict svm bo worker handle error

Migrate vram to ram may fail to find the vma if process is exiting
and vma is removed, evict svm bo worker sets prange->svm_bo to NULL
and warn svm_bo ref count != 1 only if migrating vram to ram
successfully.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: fix vcn ring test failure in igt reload test

[why]
On Renoir, vcn ring test failed on the second time insmod in the reload
test. After investigation, it proves that vcn only can disable dpg under
dpg unpause mode (dpg unpause mode is default for dec only, dpg pause
mode is for dec/enc).

[how]
unpause dpg in dpg stopping procedure.

Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: only allow secure submission on rings which support that

Only GFX ring, SDMA ring and VCN decode ring support secure submission
at the moment.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fixed the warnings reported by kernel test robot

The reported warnings are as follows:
  1.warning:no-previous-prototype-for-amdgpu_hdp_ras_fini.
  2.warning:no-previous-prototype-for-amdgpu_mmhub_ras_fini.

Amdgpu_hdp_ras_fini and amdgpu_mmhub_ras_fini are unused
in the code, they are the only functions in amdgpu_hdp.c
and amdgpu_mmhub.c. After removing these two functions,
both amdgpu_hdp.c and amdgpu_mmhub.c are empty, so these
two files can be deleted to fix the warning.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.177

    This version brings along following fixes:
    - Added I2C escape to support query exist
    - Functionality to get pipe from stream context
    - debugfs entry fixes
    - Block zstate when more than one plane enabled
    - Update to engine ddc
    - Reading lante status during LT fixes
    - Null point filters
    - [FW Promotion] Release 0.0.108.0

Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.108.0

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2

[why]
DCN31 has this in zstate save/restore sequence.
need for non_zstate supported ASIC

[how]
add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wait for hubp read line for Pollock

[Why]
Underflow occurred while hubp ret pipe read is idle and the
second pipe is powered up and added. Flickering and underflow
are only observed on Pollock.

[How]
Check the hubp ret pipe read prior to unlock pipes.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Becle Lee <becle.lee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add null pointer filter

[Why & How]
Add null pointer filter for logical integrity.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Retry when fail reading lane status during LT

[Why]
In dp_get_lane_status_and_lane_adjust(), we call core_link_read_dpcd()
to get lane status but we ignore the return value of the function. If
there is problem with AUX and we eventually can only get partial data
from monitor, we might misuse the data to jude the link training result.
Which could have us trapped in the dc_link_dp_perform_link_training()
since we thought that we can still give a try on another link setting.

[How]
In dp_get_lane_status_and_lane_adjust(), take return value of
core_link_read_dpcd() into account. If we fail to read all requested
data, we treat lanes status as previous one and repeat LT steps again.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add new enum for EDID status

[Why]
We must support a new type of partial edid return in the future

[How]
Add interface and case hander for partial edid

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block zstate when more than one plane enabled

[Why]
Currently Z10 save/restore only covers 1 plane case. If we enter
Z10 with 2 planes enabled, 1 of the 2 planes will not be restored.
causing black screen.

[How]
Disable Zstate when more than 1 plane is enabled. Right now Z9 enable
but Z10 disable is not a supported config, so we disable both.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update engine ddc

[Why]
Crash caused by a ddc update failure

[How]
Update engine ddc before release engine.

Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix a few parts in debugfs entry

[Why & How]
1. To leverage and simplify the igt tool. Change the value of
retrain when calling preferred training settings.
Now, writing value to link settings triggers link training immediately.

2. Add dc lock when triggering link training in edp_ilr_write()

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function to get the pipe from the stream context

[Why]
We need a helper function in dc to grab the pipe from the stream
context.

[How]
Add it.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add I2C escape to support query device exist.

[How]
1. Search OEM I2C info from BIOS and compare with input parameter.
2. If BIOS doesn't record it, just try to read one byte.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move reset domain init before calling RREG32

amdgpu_detect_virtualization reads register, amdgpu_device_rreg access
adev->reset_domain->sem if kernel defined CONFIG_LOCKDEP, below is the
random boot hang backtrace on Vega10. It may get random NULL pointer
access backtrace if amdgpu_sriov_runtime is true too.

Move amdgpu_reset_create_reset_domain before calling to RREG32.

 BUG: kernel NULL pointer dereference, address:
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 Workqueue: events work_for_cpu_fn
 RIP: 0010:down_read_trylock+0x13/0xf0
 Call Trace:
  <TASK>
  amdgpu_device_skip_hw_access+0x38/0x80 [amdgpu]
  amdgpu_device_rreg+0x1b/0x170 [amdgpu]
  amdgpu_detect_virtualization+0x73/0x100 [amdgpu]
  amdgpu_device_init.cold.60+0xbe/0x16b1 [amdgpu]
  ? pci_bus_read_config_word+0x43/0x70
  amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
  amdgpu_pci_probe+0x1a1/0x3a0 [amdgpu]

Fixes: d0fb18b535679a ("drm/amdgpu: Move reset sem into reset_domain")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: fix gfx hang on renoir in IGT reload test

[why]
CP hangs in igt reloading test on renoir, more precisely, hangs on the
second time insmod.

[how]
mode2 reset can make it recover, and mode2 reset only effects gfx core,
dcn and the screen will not be impacted.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: only check for _PR3 on dGPUs

We don't support runtime pm on APUs.  They support more
dynamic power savings using clock and powergating.

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: use pm mutex to protect ecc info table

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop xmgi23 error query/reset support

xgmi_ras is only initialized when host to GPU interface
is PCIE. in such case, xgmi23 is disabled and protected
by security firmware. Host access will results to
security violation

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix aldebaran xgmi topology for vf

VFs must also distinguish whether or not the TA supports full duplex or
half duplex link records in order to report the correct xGMI topology.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: enable scatter/gather display for DCN 3.1.6

Enable scatter/gather display for DCN 3.1.6.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add pstate verification and recovery for DCN31

[Why]
To debug when p-state is being blocked and avoid PMFW hangs when
it does occur.

[How]
Re-use the DCN10 hardware sequencer by adding a new interface for
verifying p-state high on the hubbub. The interface is mostly the
same as the DCN10 interface, but the bit definitions have changed for
the debug bus.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU export dmabuf handles for GTT BOs

Export dmabuf handles for GTT BOs so that their contents can be accessed
using SDMA during checkpoint/restore.

v2: Squash in fix from David to set dmabuf handle to invalid for BOs
that cannot be accessed using SDMA during checkpoint/restore.

Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by : Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Refactor restore BO function

Refactor CRIU restore BO to reduce identation.

Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU remove sync and TLB flush on restore

When the process is getting restored, the queues are not mapped yet, so
there is no VMID assigned for this process and no TLBs to flush.

Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dp kvm can't light up

[why]
The DP KVM failed to light up, since the lttpr_mode is not reset to
default value when failed to read LTTPR capabilities, and the
variable max_link_rate retains a initial value zero, this cause variable
link_rate be assigned to an error value zero, consquently pixel_clock
get wrong value zero, and kvm can't light up.

[how]
Reset lttpr_mode to default value when failed to read LTTPR
capabilities, so that the link_rate fallbacks to the minimum rate that
supported by link encoder and sink.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Send message when resp status is 0xFC

When PMFW is really busy, it will respond with 0xFC. However, it doesn't
change the response register state when it becomes free. Driver should
retry and proceed to send message if the response status is 0xFC.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: message smu to update bad channel info

It should notice SMU to update bad channel info when detected
uncorrectable error in UMC block

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add send bad channel info function

support message SMU update bad channel info to update HBM bad channel
info in OOB table

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU code from dcn10 to dml/dcn10 folder

FPU operations in dcn10 was already moved to dml folder via calcs code.
However, dcn1_0_ip and dcn_1_0_soc with FPU componentd remains on dcn10.
Following previous changes to isolate FPU, this patch creates dcn10_fpu
files to isolate FPU-specific code and moves those structs to it.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU operations from dcn21 to dml/dcn20 folder

dml/dcn20_fpu file centralizes all DCN2x functions that require FPU access.
Therefore, this patch moves FPU-related code from dcn21 to dcn20_fpu. These
include:
- dcn21_populate_dml_pipes_from_context()
- dcn21_validate_bandwidth_fp() and related:
  - dcn21_calculate_wm(),
  - patch_bounding_box(),
  - calculate_wm_set_for_vlevel()
- renaming update_bw_bounding_box() to dcn21_update_bw_bounding_box(), move
to dcn20_fpu with related static function construct_low_pstate_lvl()

Also, make dcn21_fast_validate_bw() public in dcn21_resource as it is called
by dcn21_validate_bandwidth_fp() now in dcn20_fpu.

Reuse dcn20_fpu_adjust_dppclk() in dcn21_fast_validate_bw() as it isolates
the same FPU operation.

Include dchubbub.h as it is required in dcn21_populate_dml_pipes_from_context()

Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU-related code from dcn20 to dml folder

Move parts of dcn20 code that uses FPU to dml folder. It aims to isolate
FPU operations as described by series:

drm/amd/display: Introduce FPU directory inside DC
https://patchwork.freedesktop.org/series/93042/

This patch moves the following functions from dcn20_resource to
dml/dcn20_fpu and calls of public functions in dcn20_resource are
wrapped by DC_FP_START/END():

- void dcn20_populate_dml_writeback_from_context
- static bool is_dtbclk_required()
- static enum dcn_zstate_support_state()
- void dcn20_calculate_dlg_params()
- static void swizzle_to_dml_params()
- int dcn20_populate_dml_pipes_from_context()
- void dcn20_calculate_wm()
- void dcn20_cap_soc_clocks()
- void dcn20_update_bounding_box()
- void dcn20_patch_bounding_box()
- bool dcn20_validate_bandwidth_fp()

This movement also affects dcn21/30/31, as dcn20_calculate_dlg_params()
is used by them. For this reason, I included dcn20_fpu headers in
dcn20_resource headers to make dcn20_calculate_dlg_params() visible to
dcn21/30/31.

Three new functions are created to isolate well-delimited FPU
operations:

- void dcn20_fpu_set_wb_arb_params(): set cli_watermark,
  pstate_watermark and time_per_pixel from wb_arb_params (struct
mcif_arb_params), since those uses FPU operations on double types:
WritebackUrgentWatermark, WritebackDRAMClockChangeWatermark, '16.0'.
- void dcn20_fpu_set_wm_ranges(): set min_fill_clk_mhz and
  max_fill_clk_mhz involves FPU calcs on dram_speed_mts (double type);
- void dcn20_fpu_adjust_dppclk(): adjust operation on RequiredDPPCLK
  that is a double.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix compile error from TO_CLK_MGR_INTERNAL

[Why]

On LNX, TO_CLK_MGR_INTERNAL() only works to get clk_mgr_internal from a
given clk_mgr. In clk_mgr_dcn316 struct, the clk_mgr_internal is already
a memeber by the alias 'base'

[How]

Use &clk_mgr->base instead.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix double free during GPU reset on DC streams

[Why]
The issue only occurs during the GPU reset code path.

We first backup the current state prior to commiting 0 streams
internally from DM to DC. This state backup contains valid link
encoder assignments.

DC will clear the link encoder assignments as part of current state
(but not the backup, since it was a copied before the commit) and
free the extra stream reference it held.

DC requires that the link encoder assignments remain cleared/invalid
prior to commiting. Since the backup still has valid assignments we
call the interface post reset to clear them. This routine also
releases the extra reference that the link encoder interface held -
resulting in a double free (and eventually a NULL pointer dereference).

[How]
We'll have to do a full DC commit anyway after GPU reset because
the stream count previously went to 0.

We don't need to retain the assignment that we had backed up, so
just copy off of the now clean current state assignment after the
reset has occcurred with the new link_enc_cfg_copy() interface.

Fixes: 6d63fcc2a334 ("drm/amd/display: Reset link encoder assignments for GPU reset")

Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NULL check

[Why]
Virtualization enters blue screen of death (BSoD)
due to NULL res_pool object when accessing DSC
encoder capability.

[How]
Add NULL check to avoid blue screen of death.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.176

drm/amd/display: 3.2.176

    This version brings along following fixes:
    - move FPU operations from dcn21 to dml/dcn20 folder
    - move FPU-related code from dcn20 to dml folder
    - Fix compile error from TO_CLK_MGR_INTERNAL
    - Fix double free during GPU reset on DC streams
    - Add NULL check
    - [FW Promotion] Release 0.0.107.0
    - enable dcn315/316 s0i2 support
    - handle DP2.0 RX with UHBR20 but not UHBR13.5 support
    - disable HPD SW timer for passive dongle type 1 only
    - add gamut coefficient set A and B
    - merge two duplicated clock_source_create
    - Add link dp trace support
    - move FPU associated DCN303 code to DML folder
    - Release AUX engine after failed acquire
    - Add minimal pipe split transition state
    - Clean up fixed VS PHY test w/a function
    - fix the clock source contruct for dcn315
    - cleaning up smu_if to add future flexibility
    - fix deep color ratio
    - add debug option to bypass ssinfo from bios for dcn315

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.107.0

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable dcn315/316 s0i2 support

[why]
enable the support in driver, let the control by CMOS

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: handle DP2.0 RX with UHBR20 but not UHBR13.5 support

[why]
DP2.0 defines DP2.0 RX capability using bit maps. This means there is
a corner case the DP2.0 RX can declare UHBR20 capability but not UHBR13.5 support.
In this case we should skip UHBR13.5 selection and continue to our next option
in decide liink settings.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable HPD SW timer for passive dongle type 1 only

[why]
Need to provide this workaround
only for type 1 passive dongle

[how]
Detect if dongle is type 1 or 2.
And use it to determine if w/a is needed.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add gamut coefficient set A and B

[Why]
Screen shake on DCN3 night light SDR BR3.

[How]
Change the logic to use double buffer reisgter on gamut settings.

Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: merge two duplicated clock_source_create

[why]
dcn31x could use dcn31 sepcific which contains deep_color_ratio for dmub

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add link dp trace support

[Why]
It is nice to have link training and link loss status logging in
our trace, and this patch add the all necessary accessors in dc
side.

[How]
1. Define dp_trace struct and create new file link_dp_trace.c and
link_dp_trace.h;
2. Add dp link training status update in dc_link_dp.c;

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move FPU associated DCN303 code to DML folder

[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN303 to DML, where all FPU code
should locate.

Co-authored-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Release AUX engine after failed acquire

[Why]
There is a sequence in which aux arbitration
doesn't work correctly. Driver is left with
aux access after it times out waiting for access.
In future dmub fw is never granted aux access
and is stuck in a while loop.

[How]
Cancel aux request from driver after timing out.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add minimal pipe split transition state

[WHY?] When adding/removng a plane to some configurations,
unsupported pipe programming can occur when moving to a new plane.

[HOW?]
Add a safe transistion state before programming new configuration.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up fixed VS PHY test w/a function

[Why]
Unify naming for fixed VS workarounds.

[How]
Rename function to match naming convention.
Refactor code to remove unused function.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix the clock source contruct for dcn315

[why]
Driver sends invalid deep color ratio to DMUB. Update it to the right
one by using another clock source construct.

Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: cleaning up smu_if to add future flexibility

why and how:
need to hook in new smu interfaces
cleaning up code that used old variables

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leung, Martin <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix deep color ratio

Fix enum mapping for deep color ratio

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debug option to bypass ssinfo from bios for dcn315

[Why & How]
Add debug option to bypass ssinfo from BIOS for dcn315.

Reviewed-by: Park, Chris <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change registers in error checking for smu 13.0.5

smu 13.0.5 use new registers for smu msg and param.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Disable baco dummy mode

On aldebaran, BACO dummy mode may be enabled during reset. Disable
it during resume.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/gem: add missing boundary check in vm_access

A missing bounds check in vm_access() can lead to an out-of-bounds read
or write in the adjacent memory area, since the len attribute is not
validated before the memcpy later in the function, potentially hitting:

[  183.637831] BUG: unable to handle page fault for address: ffffc90000c86000
[  183.637934] #PF: supervisor read access in kernel mode
[  183.637997] #PF: error_code(0x0000) - not-present page
[  183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0
[  183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI
[  183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G      D           5.17.0-rc6-ci-drm-11296+ #1
[  183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019
[  183.638430] RIP: 0010:memcpy_erms+0x6/0x10
[  183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246
[  183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc
[  183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004
[  183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000
[  183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000
[  183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000
[  183.645653] FS:  00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000
[  183.646570] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0
[  183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  183.650142] Call Trace:
[  183.650988]  <TASK>
[  183.651793]  vm_access+0x1f0/0x2a0 [i915]
[  183.652726]  __access_remote_vm+0x224/0x380
[  183.653561]  mem_rw.isra.0+0xf9/0x190
[  183.654402]  vfs_read+0x9d/0x1b0
[  183.655238]  ksys_read+0x63/0xe0
[  183.656065]  do_syscall_64+0x38/0xc0
[  183.656882]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  183.657663] RIP: 0033:0x7fe5ef725142
[  183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142
[  183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005
[  183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046
[  183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0
[  183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000

Changes since v1:
     - Updated if condition with range_overflows_t [Chris Wilson]

Fixes: 9f909e215fea ("drm/i915: Implement vm_ops->access for gdb access into mmaps")
Signed-off-by: Mastan Katragadda <mastanx.katragadda@intel.com>
Suggested-by: Adam Zabrocki <adamza@microsoft.com>
Reported-by: Jackson Cody <cody.jackson@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
[mauld: tidy up the commit message and add Cc: stable]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303060428.1668844-1-mastanx.katragadda@intel.com
(cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'drm-intel-next-fixes-2022-03-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Reduce overzealous alignment constraints for GGTT
- Add missing mdev attribute "name" for GVT
- Async flip fixes (Ville)
- Static checker fix (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YimvoLOZ8RPKrITv@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-next-5.18-2022-03-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.18-2022-03-09:

amdgpu:
- Misc code cleanups
- Misc display fixes
- PSR display fixes
- More RAS cleanup
- Hotplug fix
- Bump minor version for hotplug tests
- SR-IOV fixes
- GC 10.3.7 updates
- Remove some firmwares which are no longer used
- Mode2 reset refactor
- Aldebaran fixes
- Add VCN fwlog feature for VCN debugging
- CS code cleanup
- Fix clang warning
- Fix CS clean up rebase breakage

amdkfd:
- SVM fixes
- SMI event fixes and cleanups
- vmid_pasid mapping fix for gfx10.3

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309224439.2178877-1-alexander.deucher@amd.com

Merge tag 'drm-msm-next-2022-03-08' of https://gitlab.freedesktop.org/drm/msm into drm-next

Follow-up pull req for v5.18 to pull in some important fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwHFHEd+9df-0aBOCfmw+ULvTS3f18sJuq_cvGKLDSjw@mail.gmail.com

drm/amdgpu: fix a wrong ib reference

It should be p->job->ibs[j] instead of p->job->ibs[i] here.

Fixes: cdc7893fc93f19 ("drm/amdgpu: use job and ib structures directly in CS parsers")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: bail out early if no get_atc_vmid_pasid_mapping_info

it makes no sense to continue with an undefined vmid.

Fixes: c8b0507f40deea ("drm/amdkfd: judge get_atc_vmid_pasid_mapping_info before call")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'exynos-drm-next-v5.18' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

New feature
- Add BGR pixel format support for FIMD device. As for this,
  this patch uses undocumented register, WIN_RGB_ORDER, but
  it is safe because product kernels have been using same
  register.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304085220.324245-1-inki.dae@samsung.com

drm/i915/gtt: reduce overzealous alignment constraints for GGTT

Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.

Bspec: 45015
Fixes: 87bd701ee268 ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com
(cherry picked from commit c64fa77dd4609cb8cd53fbb73b02434ae8212c7a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/msm/gpu: Fix crash on devices without devfreq support (v2)

Avoid going down devfreq paths on devices where devfreq is not
initialized.

v2: Change has_devfreq() logic [Dmitry]

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 6aa89ae1fb04 ("drm/msm/gpu: Cancel idle/boost work on suspend")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220308184844.1121029-1-robdclark@gmail.com

drm/msm/adreno: fix cast in adreno_get_param()

These casts need to happen before the shift.  The only time it would
matter would be if "rev.core" is >= 128.  In that case the sign bit
would be extended and we do not want that.

Fixes: afab9d91d872 ("drm/msm/adreno: Expose speedbin to userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220307133105.GA17534@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge tag 'gvt-next-2022-03-07' of https://github.com/intel/gvt-linux into drm-intel-next-fixes

- add the missing attribute "name" in VFIO mdev hierarchy.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e38f0725-6b22-8e49-b8f6-41986b0ece06@intel.com

drm/i915: Fix the async flip wm0/ddb optimization

The current implementation of the async flip wm0/ddb optimization
does not work at all. The biggest problem is that we skip the
whole intel_pipe_update_{start,end}() dance and thus never actually
complete the commit that is trying to do the wm/ddb change.

To fix this we need to move the do_async_flip flag to the crtc
state since we handle commits per-pipe, not per-plane.

Also since all planes can now be included in the first/last
"async flip" (which gets converted to a sync flip to do the
wm/ddb mangling) we need to be more careful when checking if
the plane state is async flip comptatible. Only planes doing
the async flip should be checked and other planes are perfectly
fine not adhereing to any async flip related limitations.

However for subsequent commits which are actually going do the
async flip in hardware we want to make sure no other planes
are in the state. That should never happen assuming we did our
job correctly, so we'll toss in a WARN to make sure we catch
any bugs here.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be480 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 2e08437160d1e8f2cd3f0d56d59e74423602116e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Check async flip capability early on

Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.

And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be480 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b0b2bed2a1305c8f977c6b7d5fa162773693a212)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Don't skip ddb allocation if data_rate==0

data_rate==0 no longer means a plane is disabled, it could
also mean we want to use the minimum ddb allocation for it.
Hence we can't bail out early during ddb allocation or
else we'll simply forget to allocate any ddb for such planes.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 6a4d8cc6bbbf ("drm/i915: Don't allocate extra ddb during async flip for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 6475e106821babc0dc478a9cb3fc3973739c43fb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Avoid negative shift due to bigjoiner_pipes==0

bigjoiner_pipes==0 leads bigjoiner_master_pipe() to
do BIT(ffs(0)-1) which is undefined behaviour. The code should
actually still work fine since the only place we provoke
that is intel_crtc_bigjoiner_slave_pipes() and it'll bitwise
AND the result with 0, so doesn't really matter what we get
out of bigjoiner_master_pipe(). But best not provoke undefined
behaviour anyway.

Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: a6e7a006f5d5 ("drm/i915: Change bigjoiner state tracking to use the pipe bitmask")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit cccc71b552a1040ad3d738d7ec95570801fb0bf6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/amdkfd: Add format attribute to kfd_smi_event_add

To enable compiler type-checked against the format string in callers.

All warnings (new ones prefixed by >>):

>> warning: function 'kfd_smi_event_add' might be a candidate for
'gnu_printf' format attribute [-Wsuggest-attribute=format]

Fixes: d58b8a99cbb8 ("drm/amdkfd: Add SMI add event helper")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/gvt: add the missing mdev attribute "name"

The mdev attribute "name" is required by some middle software, e.g.
KubeVirt, an open source SW that manages VM on Kubernetes cluster uses
the mdev sysfs directory/file structure to discover mediated device in
nodes in the cluster.

v2:

- Fix the missing defination in gvt_type_attrs. (Zhenyu)

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hui Chun Ong <hui.chun.ong@intel.com>
Cc: Terrence Xu <terrence.xu@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.wang.linux@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220222150532.9090-1-zhi.a.wang@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/msm: Fix dirtyfb refcounting

refcount_t complains about 0->1 transitions, which isn't *quite* what we
wanted.  So use dirtyfb==1 to mean that the fb is not connected to any
output that requires dirtyfb flushing, so that we can keep the underflow
and overflow checking.

Fixes: 9e4dde28e9cd ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304202146.845566-1-robdclark@gmail.com

drm/msm/a6xx: Fix missing ARRAY_SIZE() check

Fixes: f6d62d091cfd ("drm/msm/a6xx: add support for Adreno 660 GPU")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220305173405.914989-1-robdclark@gmail.com

drm/msm: Add MSM_SUBMIT_FENCE_SN_IN

Add a way for userspace to specify the sequence number fence used to
track completion of the submit.  As the seqno fence is simply an
incrementing counter which is local to the submitqueue, it is easy for
userspace to know the next value.

This is useful for native userspace drivers in a vm guest, as the guest
to host roundtrip can have high latency.  Assigning the fence seqno in
the guest userspace allows the guest to continue without waiting for
response from the host.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com

drm/msm/a6xx: Zap counters across context switch

Any app controlled perfcntr collection (GL_AMD_performance_monitor, etc)
does not require counters to maintain state across context switches.  So
clear them if systemwide profiling is not active.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-5-robdclark@gmail.com