Arnd Bergmann [Tue, 22 Aug 2023 01:48:48 +0000 (21:48 -0400)]
Merge tag 'socfpga_dts_updates_for_v6.6' of git://git./linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.6
- Fix dtbs_check warnings for usbphy, sram, rstmgr, memory, partitions
- Updated "stmmaceth-ocp" reset-names to "ahb" for stmmac ethernet
- Add initial support for Agilex5
* tag 'socfpga_dts_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex5: add initial support for Intel Agilex5 SoCFPGA
dt-bindings: clock: add Intel Agilex5 clock manager
dt-bindings: reset: add reset IDs for Agilex5
dt-bindings: intel: Add Intel Agilex5 compatible
arm64: dts: socfpga: change the reset-name of "stmmaceth-ocp" to "ahb"
arm64: dts: socfpga: n5x/stratix10: fix dtbs_check warning for partitions
arm64: dts: agilex/stratix10: Updated QSPI Flash layout for UBIFS
arm64: dts: agilex/stratix10/n5x: fix dtbs_check for rstmgr
arm64: dts: stratix10/agilex/n5x: fix dtbs_check warning for memory node
arm64: dts: socfpga: stratix10: fix dtbs_check warning for usbphy
arm64: dts: socfpga: agilex/stratix10: fix dtbs_check warnings for sram
Link: https://lore.kernel.org/r/20230819161418.931258-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 22 Aug 2023 01:47:47 +0000 (21:47 -0400)]
Merge tag 'riscv-dt-for-v6.6-pt2' of https://git./linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.6 Part 2
T-Head:
Add a second minimal devicetree for the second board using the th1520
SoC, the BeagleV Ahead. As with the Lichee Pi 4a, this is sufficient
only for booting to a console, with work on the mmc, clocks and ethernet
sides of things under way. A relicense to a dual licence for the
existing devicetree files is also done, for good measure.
RISC-V Devicetrees for v6.6-pt2
StarFive:
Fix the sort order of some nodes that I resolved incorrectly during a
merge conflict.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6-pt2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
riscv: dts: starfive: fix jh7110 qspi sort order
Link: https://lore.kernel.org/r/20230819-unwieldy-railing-9bba2b176aa7@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 22 Aug 2023 01:37:53 +0000 (21:37 -0400)]
Merge tag 'qcom-arm64-for-6.6' of https://git./linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
* tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits)
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen
arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration
arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins
arm64: dts: qcom: msm8998: Add DPU1 nodes
arm64: dts: qcom: msm8996: Fix dsi1 interrupts
arm64: dts: qcom: sdx75-idp: Add regulator nodes
arm64: dts: qcom: sdx75: Add rpmhpd node
arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
arm64: dts: qcom: Add pmx75 PMIC dtsi
arm64: dts: qcom: Add pm7550ba PMIC dtsi
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
arm64: dts: qcom: sdx75: Add spmi node
arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU
...
Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 22 Aug 2023 01:34:26 +0000 (21:34 -0400)]
Merge tag 'qcom-dts-for-6.6' of https://git./linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.6
GCC and LCC clock controller parent clocks are introduced on MDM9615.
The newly introduced RPM representation is introduced across multiple
platforms.
Voltage ADC channel names are corrected across multiple platforms.
APQ8064 gains a definition for GSBI4.
The XO clock for SDHCI is corrected, as is the USB node name, on
IPQ4019. USB node name is also corrected for SDX55.
The correct PMIC is included on SDX65 MTP.
The incorrect spi-max-frequency property is removed from controllers on
IPQ8064 and MSM8960.
OCMEM and the display subsystem are added to MSM8226.
Reset line is added to the PM8941 and the APQ8074 Dragonboard, while a
few properties of the Sony Xperia Z2 Tablet touchscreen are corrected.
* tag 'qcom-dts-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: add support to gsbi4 uart
ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
ARM: dts: qcom: ipq4019: correct SDHCI XO clock
ARM: dts: qcom: Use labels with generic node names for ADC channels
ARM: dts: qcom-mdm9615: specify gcc clocks
ARM: dts: qcom-mdm9615: specify clocks for the lcc device
ARM: dts: qcom: msm8974pro-castor: correct touchscreen syna,nosleep-mode
ARM: dts: qcom: msm8974pro-castor: correct touchscreen function names
ARM: dts: qcom: msm8974pro-castor: correct inverted X of touchscreen
ARM: dts: qcom: apq8064: Drop redundant /smd node
ARM: dts: qcom: Add rpm-proc node for SMD platforms
ARM: dts: qcom: apq8074-dragonboard: add resin
ARM: dts: qcom-pm8941: add resin support
ARM: dts: qcom: minor whitespace cleanup around '='
ARM: dts: qcom: msm8960: drop spi-max-frequency from controller
ARM: dts: qcom: ipq8064: drop spi-max-frequency from controller
ARM: dts: qcom: sdx55: use generic node names for USB
ARM: dts: qcom: ipq4019: use generic node names for USB
ARM: dts: qcom: msm8226: Add ocmem
ARM: dts: qcom: msm8226: Add mdss nodes
Link: https://lore.kernel.org/r/20230818024928.2485173-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 22 Aug 2023 01:33:15 +0000 (21:33 -0400)]
Merge tag 'v6.6-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into soc/dt
Basic graphics support for rv1126, some more new peripherals for it as well
and some improvements for the edgeble-neu2 board based on this soc.
* tag 'v6.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add rv1126 VOP_LITE support
ARM: dts: rockchip: Add rv1126 PD_VO entry
ARM: dts: rockchip: Add 12V main supply for edgeble-neu2
ARM: dts: rockchip: Add 3V3_SYS regulator for edgeble-neu2
ARM: dts: rockchip: Enable SFC for edgeble-neu2
ARM: dts: rockchip: Drop EMMC_RSTN for edgeble-neu2
ARM: dts: rockchip: Add rv1126 uart5m2_xfer pins
ARM: dts: rockchip: Add rv1126 FSPI pins
ARM: dts: rockchip: Add SFC node to rv1126
Link: https://lore.kernel.org/r/6299163.hdfAi7Kttb@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 22 Aug 2023 01:31:35 +0000 (21:31 -0400)]
Merge tag 'v6.6-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.
Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).
Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).
Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)
RK3399 got the PCIe endpoint node when used as a PCIe-client.
And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.
* tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support
arm64: dts: rockchip: add rk3588 PCIe2 support
arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C
arm64: dts: rockchip: Add NanoPC T6
dt-bindings: arm: rockchip: Add NanoPC T6
arm64: dts: rockchip: Enable SATA on Radxa E25
arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
arm64: dts: rockchip: switch px30-engicam to enable-gpios
arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios
arm64: dts: rockchip: add PCIe3 support for rk3588
arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b
arm64: dts: rockchip: add USB2 to rk3588s-rock5a
arm64: dts: rockchip: add USB2 to rk3588-rock5b
arm64: dts: rockchip: add USB2 to rk3588-evb1
arm64: dts: rockchip: add USB2 support for rk3588
arm64: dts: rockchip: Enable RS485 for edgeble-neu6b
arm64: dts: rockchip: Enable RS232 for edgeble-neu6b
arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b
arm64: dts: rockchip: Enable RTC for edgeble-neu6b
arm64: dts: rockchip: Enable SATA for edgeble-neu6b
...
Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Tue, 22 Aug 2023 01:23:53 +0000 (21:23 -0400)]
Merge tag 'stm32-dt-for-v6.6-1' of git://git./linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.6, round 1
Highlights:
----------
- MCU:
- Add CAN support on stm32f746.
- Add touchscreen support (edt-ft5306) on stm32f746-disco.
- Add support to Rocktech RK043FN48H display on stm32f746-disco
board.
- Add gpio-ranges for stm32f7 to fix boot issue.
- MPU:
- STM32MP13:
- Remove shmem for scmi-optee to match with OP-TEE configuration.
- Enable OP-TEE asynchronous notification by using PPI#15.
- Expose and use SCMI regulators on stm32mp135f-dk.
- STMP32MP15:
- Remove shmem for scmi-optee to match with OPTEE configuration
- Deduplicate DSI node to fix #address-cells/#size-cells issue on
boards using it.
- ST:
- Fix dts check warnings on stm32mp15-scmi boards.
- DH:
- Add missing detach mailbox for DHCOM and DHCOR SoM.
- Odyssey:
- Add missing detach mailbox for Odyssey SoM.
- OCTAVO:
- Add Linux Automation Test Automation Controller (LXA TAC) based
on Octavo Systems OSD32MP15x SiP. It contains: eMMC,
DSA-capable ETH switch (2 ports), dual CAN...
It adds two boards support: lxa-tac-gen1 and lxa-tac-gen2 based
on STM32MP157.
- PROTONIC:
- Add Power over Data Line (PoDL) Power Source Equipment (PSE)
regulator nodes on PRTT1C board. It allows power delivery and
data transmission over a single twisted pair.
* tag 'stm32-dt-for-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (29 commits)
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: st: Add gpio-ranges for stm32f769-pinctrl
ARM: dts: st: Add gpio-ranges for stm32f746-pinctrl
ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge
ARM: dts: st: stm32mp157c-emstamp: drop incorrect vref_ddr property
ARM: dts: stm32: fix dts check warnings on stm32mp15-scmi
ARM: dts: stm32: Add missing detach mailbox for DHCOR SoM
ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM
ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM
ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon
ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
ARM: dts: stm32: add touchscreen on stm32f746-disco board
ARM: dts: stm32: add pin map for i2c3 controller on stm32f7
ARM: dts: stm32: re-add CAN support on stm32f746
...
Link: https://lore.kernel.org/r/c0524a16-ab27-0cb5-8e7b-c12f7bde7e0d@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amit Pundir [Wed, 26 Jul 2023 13:27:19 +0000 (18:57 +0530)]
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
Adding a reserved memory region for the framebuffer memory
(the splash memory region set up by the bootloader).
It fixes a kernel panic (arm-smmu: Unhandled context fault
at this particular memory region) reported on DB845c running
v5.10.y.
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726132719.2117369-2-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
David Heidelberg [Mon, 14 Aug 2023 15:00:40 +0000 (17:00 +0200)]
ARM: dts: qcom: apq8064: add support to gsbi4 uart
This patch adds support to gsbi4 uart which is used in LG Mako.
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20230814150040.64133-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drew Fustini [Mon, 24 Jul 2023 18:21:29 +0000 (11:21 -0700)]
riscv: dts: change TH1520 files to dual license
Modify the SPDX-License-Identifier for dual license of GPL-2.0 OR MIT.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Acked-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Drew Fustini [Sat, 12 Aug 2023 00:47:17 +0000 (17:47 -0700)]
riscv: dts: thead: add BeagleV Ahead board device tree
The BeagleV Ahead single board computer uses the T-Head TH1520 SoC.
Add a minimal device tree to support basic uart/gpio/dmac drivers so
that a user can boot to a basic shell.
Link: https://beagleboard.org/beaglev-ahead
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Drew Fustini [Sat, 12 Aug 2023 00:47:16 +0000 (17:47 -0700)]
dt-bindings: riscv: Add BeagleV Ahead board compatibles
Document the compatible strings for the BeagleV Ahead board which uses
the T-Head TH1520 SoC.
Link: https://beagleboard.org/beaglev-ahead
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Etienne Carriere [Wed, 12 Jul 2023 14:24:31 +0000 (16:24 +0200)]
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
Since OP-TEE release tag 3.22.0, OP-TEE SCMI service for STM32MP13x
SoC family exposes PMIC voltage regulators. This change defines
them in the platform DTS file and removes the fixed regulators that
were previously defined to abstract them before OP-TEE firmware was
ready.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Etienne Carriere [Wed, 12 Jul 2023 14:24:30 +0000 (16:24 +0200)]
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
Updates STM32MP13x SoC DTSI file to define the SoC voltage regulators
exposed by OP-TEE SCMI service and remove the fixed regulator
abstraction previously used until OP-TEE OS firmware embeds the
service which it does since its release tag 3.22.0.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Etienne Carriere [Wed, 12 Jul 2023 14:24:29 +0000 (16:24 +0200)]
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
Adds SCMI regulator identifiers for STM32MP13x family.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Dario Binacchi [Wed, 16 Aug 2023 07:26:58 +0000 (09:26 +0200)]
ARM: dts: stm32: support display on stm32f746-disco board
Add support to Rocktech RK043FN48H display on stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Dario Binacchi [Mon, 14 Aug 2023 13:28:43 +0000 (15:28 +0200)]
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
In the schematics of document UM1907, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.
This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Dario Binacchi [Mon, 14 Aug 2023 13:28:42 +0000 (15:28 +0200)]
ARM: dts: stm32: add pin map for LTDC on stm32f7
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Dario Binacchi [Mon, 14 Aug 2023 13:28:41 +0000 (15:28 +0200)]
ARM: dts: stm32: add ltdc support on stm32f746 MCU
Add LTDC (Lcd-tft Display Controller) support.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Konrad Dybcio [Fri, 11 Aug 2023 20:48:39 +0000 (22:48 +0200)]
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
Some TLMM pins are wakeup-capable. Describe the relationship between
these two peripherals to enable this functionality.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-tlmm_wakeup-v1-6-5616a7da1fff@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 20:48:38 +0000 (22:48 +0200)]
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
Some TLMM pins are wakeup-capable. Describe the relationship between
these two peripherals to enable this functionality.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-tlmm_wakeup-v1-5-5616a7da1fff@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 20:48:37 +0000 (22:48 +0200)]
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
Some TLMM pins are wakeup-capable. Describe the relationship between
these two peripherals to enable this functionality.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-tlmm_wakeup-v1-4-5616a7da1fff@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 20:48:36 +0000 (22:48 +0200)]
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
Some TLMM pins are wakeup-capable. Describe the relationship between
these two peripherals to enable this functionality.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-tlmm_wakeup-v1-3-5616a7da1fff@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 20:48:35 +0000 (22:48 +0200)]
arm64: dts: qcom: sdm670: Add PDC
Add support for the PDC to enable deep sleep wakeup from external sources.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-tlmm_wakeup-v1-2-5616a7da1fff@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Conor Dooley [Tue, 15 Aug 2023 10:34:34 +0000 (11:34 +0100)]
riscv: dts: starfive: fix jh7110 qspi sort order
Emil pointed out that "
13010000 sorts after
12070000". Reshuffle the
entries to be in-order.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Arnd Bergmann [Mon, 14 Aug 2023 21:47:19 +0000 (23:47 +0200)]
Merge tag 'dt64-cleanup-6.6' of https://git./linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.6
Just two cleanups of missing cache properties for Nuvoton and LG.
* tag 'dt64-cleanup-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: lg: add missing cache properties
arm64: dts: nuvoton: add missing cache properties
Link: https://lore.kernel.org/r/20230814114154.26017-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 21:43:16 +0000 (23:43 +0200)]
Merge tag 'ti-k3-dt-for-v6.6' of https://git./linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.6
New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)
New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support
Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios
* tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (68 commits)
arm64: dts: ti: verdin-am62: Add DSI display support
arm64: dts: ti: Add support for the AM62P5 Starter Kit
arm64: dts: ti: Introduce AM62P5 family of SoCs
dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
arm64: dts: ti: k3-am69-sk: Add phase tags marking
arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
arm64: dts: ti: k3-j784s4: Add phase tags marking
arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
arm64: dts: ti: k3-am62-main: Add node for DSS
arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level
arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-*: fix fss node dtbs check warnings
arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
...
Link: https://lore.kernel.org/r/20230814160651.frxohyshd2evp2k4@expenses
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 21:40:17 +0000 (23:40 +0200)]
Merge tag 'imx-dt64-6.6' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree chanage for 6.6:
- New board device trees: i.MX93 based MBa93xxLA SBC, DEBIX SOM A,
Gateworks i.MX8MM and i.MX8MP Venice boards.
- Add HDMI audio and video support for i.MX8MM/N Beacon board.
- Add coresight trace support for i.MX8MQ SoC.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Add sound card support for verdin-imx8mp devices.
- A couple of change from Frank Li to add CPU frequency table and
thermal support for i.MX8QM SoC.
- Add L1 and L2 cache info for LS1028A SoC.
- A series of i.MX93 changes from Peng Fan t oadd thermal and CM33 core
support.
- A few imx8mq-librem5 updates from Martin Kepplinger and
Sebastian Krzyszkowiak.
- A series of imx8mp-phycore-som changes from Teresa Remmet to update
regulators.
- A bunch of changes from Tim Harvey to update various Gateworks boards.
- A bunch of dtschema warning fixes from Fabio Estevam, Krzysztof
Kozlowski, etc.
- Other small and random changes.
* tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (88 commits)
arm64: dts: imx8mq-librem5-devkit: Drop power-supply
arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always on
arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-names
arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-names
arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entry
arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support
arm64: dts: imx8mp-debix: remove unused fec pinctrl node
arm64: dts: imx8mp-debix-model-a: Remove invalid rtc property
arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 property
arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"
arm64: dts: imx8mp-evk: Add HDMI support
arm64: dts: freescale: verdin-imx8mp: dev: add sound card
arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card
arm64: dts: imx8mm-emcon: Fix the regulator names
arm64: dts: imx: Pass a single BD71847 clock entry
arm64: dts: ls1028a: add l1 and l2 cache info
arm64: dts: imx8mm-phyboard-polis-rdk: Remove 'fsl,spi-num-chipselects'
arm64: dts: imx8dxl-evk: Remove 'fsl,spi-num-chipselects'
arm64: dts: freescale: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm64: dts: tqma8mqnl: Add vcc supply to i2c eeproms
...
Link: https://lore.kernel.org/r/20230813133354.847010-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 21:38:26 +0000 (23:38 +0200)]
Merge tag 'imx-dt-6.6' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree change for 6.6:
- New device tree for TQ-Systems MBLS102xA board.
- A bunch of dtschema warning fixes from Fabio Estevam and
Krzysztof Kozlowski.
- Add missing supply regulator for imx6qdl-mba6 and imx6qdl-tqma6x.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Disable the internal i.MX6 watchdog and rely on PMIC reboot handler
for phycore and pfla02 boards.
- Replace NO_PAD_CTL by explicit pad configuration for karo-tx25 board.
* tag 'imx-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names
ARM: dts: imx6ul: Fix nand-controller #size-cells
ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warnings
ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing property
ARM: dts: imx6q-prti6q: Fix the SDIO wifi node
ARM: dts: vfxxx: Pass 'mmc' as the esdhc node names
ARM: dts: imx53-smd: Remove invalid SPI flash entry
ARM: dts: imx50-evk: Use generic node name for SPI NOR flash
ARM: dts: imx6q-cm-fx6: Remove invalid SPI flash entry
ARM: dts: ls1021a: add TQMLS1021A flash partition layout
ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
ARM: dts: imx: Remove 'compatible' from the pfuze nodes
ARM: dts: imx: Pass #sound-dai-cells to sgtl5000
ARM: dts: nxp: mxs: split interrupts per cells
ARM: dts: imx6ul-geam: Remove invalid sgtl5000 property
ARM: dts: imx28: drop incorrect reg in fixed regulators
ARM: dts: imx27: drop incorrect reg in fixed regulators
ARM: dts: imx25: drop incorrect reg in fixed regulators
ARM: dts: imx23: drop incorrect reg in fixed regulators
ARM: dts: imx50-kobo-aura: switch to enable-gpios
...
Link: https://lore.kernel.org/r/20230813133354.847010-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 21:34:06 +0000 (23:34 +0200)]
Merge tag 'imx-bindings-6.6' of git://git./linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.6:
- Add new compatibles for various i.MX based boards: DEBIX, TQMa93xxLA,
Gateworks i.MX8M, etc.
* tag 'imx-bindings-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Polyhex DEBIX SOM A based boards
dt-bindings: arm: fsl: fix DEBIX binding
dt-bindings: arm: fsl: add TQ-Systems LS1021A board
dt-bindings: arm: Add Gateworks i.MX8M Plus gw73xx-2x board
dt-bindings: arm: Add Gateworks i.MX8M Plus gw72xx-2x board
dt-bindings: arm: Add Gateworks i.MX8M Plus gw71xx-2x board
dt-bindings: arm: Add Gateworks i.MX8M Mini GW7905-0x board
dt-bindings: arm: add TQMa93xxLA SOM
Link: https://lore.kernel.org/r/20230813133354.847010-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 21:14:12 +0000 (23:14 +0200)]
Merge tag 'sunxi-dt-for-6.6-2' of https://git./linux/kernel/git/sunxi/linux into soc/dt
- Add D1 CAN controller nodes
* tag 'sunxi-dt-for-6.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: Add CAN controller nodes
Link: https://lore.kernel.org/r/ZNjRV0kJ7v7+DAH5@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 21:08:54 +0000 (23:08 +0200)]
Merge tag 'riscv-dt-for-v6.6' of https://git./linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.6
StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
riscv: dts: starfive: jh7110: Fix GMAC configuration
riscv: dts: starfive - Add hwrng node for JH7110 SoC
riscv: dts: starfive - Add crypto and DMA node for JH7110
riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
riscv: dts: starfive: jh7110: add dma controller node
riscv: dts: starfive: Add spi node and pins configuration
riscv: dts: starfive: Add USB dts node for JH7110
riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
riscv: dts: starfive: jh7110: Add ethernet device nodes
riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
riscv: dts: starfive: jh7110: Add syscon nodes
riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
...
Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 17:08:04 +0000 (19:08 +0200)]
Merge tag 'mvebu-dt-6.6-1' of git://git./linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.6 (part 1)
Fix style issue and incorrect syntax
* tag 'mvebu-dt-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
ARM: dts: marvell: armada: drop incorrect reg in fixed regulators
ARM: dts: marvell: add missing space before {
Link: https://lore.kernel.org/r/87h6p4t0lv.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 14 Aug 2023 17:07:44 +0000 (19:07 +0200)]
Merge tag 'mvebu-dt64-6.6-1' of git://git./linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.6 (part 1)
Add the NAND Flash Controller on the AC5/AC5X SOC device tree
Fix style issue
* tag 'mvebu-dt64-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Add NAND flash controller to AC5
arm64: dts: marvell: add missing space before {
Link: https://lore.kernel.org/r/87edk8t0kl.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Niravkumar L Rabara [Tue, 1 Aug 2023 01:02:34 +0000 (09:02 +0800)]
arm64: dts: agilex5: add initial support for Intel Agilex5 SoCFPGA
Add the initial device tree files for Intel Agilex5 SoCFPGA platform.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Lin, Meng-Bo [Sat, 12 Aug 2023 07:16:56 +0000 (07:16 +0000)]
arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen
Similar to A5, E5 uses a Melfas MMS345L touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812071448.4710-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Nikita Travkin [Tue, 8 Aug 2023 10:10:13 +0000 (15:10 +0500)]
arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration
When initially submitted, the sc7180 support only targeted CROS devices
that make use of alternative TF-A firmware and not the official Qualcomm
firmware. The PSCI implementations in those firmwares differ however so
devices that use qcom firmware, like WoA laptops such as aspire1 need
different setup.
This commit adjusts the SoC dtsi to the OSI mode PSCI setup, common to
the Qualcomm firmware and introduces new sc7180-firmware-tfa.dtsi that
overrides the PSCI setup for the PC mode and uses TF-A specific
psci-suspend-param. This dtsi is added to all boards that appear to use
TF-A.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230808-sc7180-tfa-fw-v1-1-666d5d8467e5@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Sat, 5 Aug 2023 09:01:33 +0000 (11:01 +0200)]
arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
Disappointigly, the camera activity LED is implemented in software.
Hook it up as a gpio-led and (until we have camera *and* a "camera on"
LED trigger) configure it as a panic indicator.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805-topic-x13s_cam_led-v1-1-443d752158c4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Thu, 3 Aug 2023 13:05:26 +0000 (15:05 +0200)]
arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins
Pins 83-86 and 158-160 are NC, so there's no point in keeping them
reserved. Take care of that.
Fixes:
32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803-topic-x13s_pin-v1-1-fae792274e89@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
AngeloGioacchino Del Regno [Sat, 5 Aug 2023 12:26:44 +0000 (14:26 +0200)]
arm64: dts: qcom: msm8998: Add DPU1 nodes
Add the required nodes to support the display hardware on msm8998.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[konrad: update the commit msg and AGdR's email, rebase]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805-topic-8998_dpu-v1-1-9d402dc1ecc0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
David Wronek [Sat, 5 Aug 2023 13:09:37 +0000 (15:09 +0200)]
arm64: dts: qcom: msm8996: Fix dsi1 interrupts
Fix IRQ flags mismatch which was keeping dsi1 from probing by changing
interrupts = <4> to interrupts = <5>.
Fixes:
2752bb7d9b58 ("arm64: dts: qcom: msm8996: add second DSI interface")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Acked-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805130936.359860-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:54 +0000 (19:08 +0530)]
arm64: dts: qcom: sdx75-idp: Add regulator nodes
Add all the regulators along with labels found on SDX75 IDP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-10-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:53 +0000 (19:08 +0530)]
arm64: dts: qcom: sdx75: Add rpmhpd node
Add rpmhpd node and opps for this node to the SDX75 dts.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-9-git-send-email-quic_rohiagar@quicinc.com
[bjorn: include qcom-rpmpd.h as well]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:51 +0000 (19:08 +0530)]
ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
Update the pmic used in sdx65 platform to pm7250b.
Fixes:
26380f298b2b (ARM: dts: qcom: sdx65-mtp: Add pmk8350b and pm8150b pmic)
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-7-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:52 +0000 (19:08 +0530)]
arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
SDX75-idp features pmk8550, pmx75 and pm7550ba pmic, so include them.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-8-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:50 +0000 (19:08 +0530)]
arm64: dts: qcom: Add pmx75 PMIC dtsi
Add dtsi for pmx75 PMIC found in Qualcomm platforms.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-6-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:49 +0000 (19:08 +0530)]
arm64: dts: qcom: Add pm7550ba PMIC dtsi
Add dtsi for pm7550ba PMIC found in Qualcomm platforms.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1691415534-31820-5-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:48 +0000 (19:08 +0530)]
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
Add pinctrl gpio dts node for pm7250b.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-4-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rohit Agarwal [Mon, 7 Aug 2023 13:38:47 +0000 (19:08 +0530)]
arm64: dts: qcom: sdx75: Add spmi node
Add SPMI node to SDX75 dtsi.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 9 Aug 2023 19:20:25 +0000 (21:20 +0200)]
arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU
The MMSS SMMU has its own power domain. Attach it so that we can drop
the "keep it always-on" hack.
Fixes:
05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-2-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 9 Aug 2023 19:20:24 +0000 (21:20 +0200)]
arm64: dts: qcom: msm8998: Drop bus clock reference from MMSS SMMU
The MMSS SMMU has been abusingly consuming the exposed RPM interconnect
clock. Drop it.
Fixes:
05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-1-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 17:35:27 +0000 (19:35 +0200)]
arm64: dts: qcom: sm8450: Add RPMh stats
SM8450 also exposes RPMh stats, hook them up for low power state
monitoring.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_stats-v1-1-f26ae3fdf2cf@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Mon, 3 Jul 2023 18:20:12 +0000 (20:20 +0200)]
arm64: dts: qcom: msm8998: Use the correct GPLL0_DIV leg for MMCC
MMCC has its own GPLL0 legs - one for 1-1 and one for div-2 output.
We've already been using the correct one in the non-div case, start
doing so for the other one as well.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-8-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Mon, 3 Jul 2023 18:20:11 +0000 (20:20 +0200)]
arm64: dts: qcom: msm8998: Use the correct GPLL0 leg for GPUCC
GPUCC has its own GPLL0 leg, switch to it to allow shutting it down
when it's unused.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-7-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bjorn Andersson [Mon, 14 Aug 2023 02:51:26 +0000 (19:51 -0700)]
Merge branch '
20230622-topic-8998clk-v2-1-
6222fbc2916b@linaro.org' into arm64-for-6.6
Merge additional MSM8998 GCC DeviceTree binding constants for use in the
MSM8998 DeviceTree source.
Konrad Dybcio [Mon, 3 Jul 2023 18:20:05 +0000 (20:20 +0200)]
dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs
GPLL0 has two separate outputs to both GPUSS and MMSS: one that's
2-divided and one that runs at the same rate as the GPLL0 itself.
Add the missing ones to the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-1-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sridharan S N [Fri, 16 Jun 2023 08:32:37 +0000 (14:02 +0530)]
arm64: dts: qcom: ipq5332: enable GPIO based LEDs and Buttons
Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230616083238.20690-2-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Fri, 11 Aug 2023 20:50:58 +0000 (22:50 +0200)]
arm64: dts: qcom: sm8450: Add PRNG
Add the Qualcomm Pseudo-Random Number Generator.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_prng-v1-3-01becceeb1ee@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Fri, 11 Aug 2023 23:47:38 +0000 (00:47 +0100)]
arm64: dts: qcom: apq8016-sbc: Enable camss for non-mezzanine cases
When we have no camera mezzanine attached it is still possible to run the
test-pattern generator of the CSID block.
As an example:
media-ctl --reset
yavta --no-query -w '0x009f0903 1' /dev/v4l-subdev2
yavta --list /dev/v4l-subdev2
media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:UYVY8_1X16/1920x1080 field:none]'
media-ctl -l '"msm_csid0":1->"msm_ispif0":0[1]'
media-ctl -d /dev/media0 -V '"msm_ispif0":0[fmt:UYVY8_1X16/1920x1080 field:none]'
media-ctl -l '"msm_ispif0":1->"msm_vfe0_rdi0":0[1]'
media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:UYVY8_1X16/1920x1080]'
media-ctl -d /dev/media0 -p
yavta -B capture-mplane --capture=5 -n 5 -I -f UYVY -s 1920x1080 --file=TPG-UYVU-1920x1080-000-#.bin /dev/video0
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-8-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Fri, 11 Aug 2023 23:47:37 +0000 (00:47 +0100)]
arm64: dts: qcom: apq8016-sbc-d3-camera-mezzanine: Move default ov5640 to a standalone dts
At the moment we define a single ov5640 sensor in the apq8016-sbc and
disable that sensor.
The sensor mezzanine for this is a D3 Engineering Dual ov5640 mezzanine
card. Move the definition from the apq8016-sbc where it shouldn't be to a
standalone dts.
Enables the sensor by default, as we are adding a standalone mezzanine
structure.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-7-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Fri, 11 Aug 2023 23:47:36 +0000 (00:47 +0100)]
arm64: dts: qcom: apq8016-sbc: Rename ov5640 enable-gpios to powerdown-gpios
There are two control lines controlled by GPIO going into ov5640
- Reset
- Powerdown
The driver and yaml expect "reset-gpios" and "powerdown-gpios" there has
never been an "enable-gpios".
Fixes:
39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-6-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Fri, 11 Aug 2023 23:47:35 +0000 (00:47 +0100)]
arm64: dts: qcom: apq8016-sbc: Set ov5640 assigned-clock
The driver for the ov5640 doesn't do a set-rate, instead it expects the
clock to already be set at an appropriate rate.
Similarly the yaml for ov5640 doesn't understand clock-frequency. Convert
from clock-rate to assigned-clock and assigned-clock-rate to remediate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-5-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Fri, 11 Aug 2023 23:47:34 +0000 (00:47 +0100)]
arm64: dts: qcom: apq8016-sbc: Fix ov5640 data-lanes declaration
The yaml constraint for data-lanes is [1, 2] not [0, 2]. The driver itself
doesn't do anything with the data-lanes declaration save count the number
of specified data-lanes and calculate the link rate so, this change doesn't
have any functional side-effects.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-4-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Fri, 11 Aug 2023 23:47:33 +0000 (00:47 +0100)]
arm64: dts: qcom: apq8016-sbc: Fix ov5640 regulator supply names
The ov5640 driver expects DOVDD, AVDD and DVDD as regulator supply names.
The ov5640 has depended on these names since the driver was committed
upstream in 2017. Similarly apq8016-sbc.dtsi has had completely different
regulator names since its own initial commit in 2020.
Perhaps the regulators were left on in previous 410c bootloaders. In any
case today on 6.5 we won't switch on the ov5640 without correctly naming
the regulators.
Fixes:
39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bryan O'Donoghue [Fri, 11 Aug 2023 23:47:32 +0000 (00:47 +0100)]
arm64: dts: qcom: msm8916: Define CAMSS ports in core dtsi
Each CSIPHY in CAMMS maps to a port here in the dtsi, since the number of
CSIPHYs is fixed per SoC define the 8916 ports for both available PHYs.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Francesco Dolcini [Sat, 12 Aug 2023 19:11:23 +0000 (21:11 +0200)]
arm64: dts: ti: verdin-am62: Add DSI display support
Add MIPI-DSI support to Verdin AM62.
Verdin AM62 has a MIPI DSI interface on the edge connector, this is
provided with a Toshiba TC358778 DPI to MIPI-DSI bridge connected to the
DSS DPI port with a 18-bit width parallel bus.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230812191123.14779-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
Samin Guo [Thu, 10 Aug 2023 07:46:46 +0000 (15:46 +0800)]
riscv: dts: starfive: jh7110: Fix GMAC configuration
Fixed configuration to improve the speed of TCP RX.
Before:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47604
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec
[ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec
[ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec
[ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec
[ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec
[ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec
[ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec
[ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver
After:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47710
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec
[ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec
[ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec
[ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec
[ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec
[ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec
[ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec
[ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec
[ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec
[ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec
[ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Fixes:
1ff166c97972 ("riscv: dts: starfive: jh7110: Add ethernet device nodes")
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[conor: converted to decimal per emil's request]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
John Watts [Mon, 7 Aug 2023 19:19:52 +0000 (05:19 +1000)]
riscv: dts: allwinner: d1: Add CAN controller nodes
The Allwinner D1, T113 provide two CAN controllers that are variants
of the R40 controller.
I have tested support for these controllers on two boards:
- A Lichee Panel RV 86 Panel running a D1 chip
- A Mango Pi MQ Dual running a T113-s3 chip
Both of these fully support both CAN controllers.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20230807191952.2019208-1-contact@jookia.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Krzysztof Kozlowski [Wed, 26 Jul 2023 07:02:54 +0000 (09:02 +0200)]
ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Krzysztof Kozlowski [Wed, 26 Jul 2023 07:02:53 +0000 (09:02 +0200)]
ARM: dts: marvell: armada: drop incorrect reg in fixed regulators
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
armada-370-dlink-dns327l.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
John Clark [Thu, 10 Aug 2023 00:31:56 +0000 (00:31 +0000)]
arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support
Device tree entries for PCIe 2.5G Ethernet NICs
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20230810003156.22123-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jagan Teki [Mon, 31 Jul 2023 11:00:08 +0000 (16:30 +0530)]
ARM: dts: rockchip: Add rv1126 VOP_LITE support
RV1126 VOP_LITE supports the video output processing ofMIPI DSI,
RGB display interfaces with max output resolution of 1920x1080.
Add support for vop in rv1126.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731110012.2913742-11-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jagan Teki [Mon, 31 Jul 2023 11:00:07 +0000 (16:30 +0530)]
ARM: dts: rockchip: Add rv1126 PD_VO entry
PD_VO power-domain tree diagram in RV1126 is connected to
- BIU_VO
- VOP
- RGA
- IEP
- DSIHOST
Add PD_VO power-domain entry in RV1126.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20230731110012.2913742-10-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Sebastian Reichel [Mon, 31 Jul 2023 16:57:23 +0000 (18:57 +0200)]
arm64: dts: rockchip: add rk3588 PCIe2 support
Add all three PCIe2 IP blocks to the RK3588 DT. Note, that RK3588
also has two PCIe3 IP blocks, that will be handled separately.
Co-developed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-neu6a, 6b
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230731165723.53069-6-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Stefan Nagy [Fri, 11 Aug 2023 20:11:18 +0000 (22:11 +0200)]
arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C
The ROCK Pi 4A, ROCK Pi 4B and ROCK Pi 4C boards contain a nor-flash chip
connected to spi1. Enable spi1 and add the device node.
This patch has been tested on ROCK Pi 4A.
Signed-off-by: Stefan Nagy <stefan.nagy@ixypsilon.net>
Link: https://lore.kernel.org/r/20230811201118.15066-1-stefan.nagy@ixypsilon.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Geert Uytterhoeven [Mon, 17 Jul 2023 13:32:13 +0000 (15:32 +0200)]
ARM: dts: nuvoton: Fix pca954x i2c-mux node names
"make dtbs_check":
arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Geert Uytterhoeven [Mon, 17 Jul 2023 13:30:55 +0000 (15:30 +0200)]
ARM: dts: aspeed: Fix pca954x i2c-mux node names
"make dtbs_check":
arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:31 +0000 (10:33 -0500)]
ARM: dts: nspire: Remove file name from the files themselves
File names inside the file does not add much and just makes it
difficult to move the files, often the file name is not updated
and becomes wrong. Remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:30 +0000 (10:33 -0500)]
ARM: dts: nspire: Use MATRIX_KEY macro for linux,keymap
This looks better and allows us to see the row and column numbers
more easily. Switch to this macro here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:29 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix uart node to conform with DT binding
This node does not follow the DT binding schema, correct this.
The arm,pl011 binding requires the first clock to be named "uartclk".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:28 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix vbus_reg node to conform with DT binding
This node does not follow the DT binding schema, correct this.
All "regulator-fixed" are voltage type, so drop "regulator-type".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:27 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix sram node to conform with DT binding
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:26 +0000 (10:33 -0500)]
ARM: dts: nspire: Fix cpu node to conform with DT binding
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Andrew Davis [Wed, 2 Aug 2023 15:33:25 +0000 (10:33 -0500)]
ARM: dts: nspire: Use syscon-reboot to handle restart
Writing this bit can be handled by the syscon-reboot driver.
Add this node to DT.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:58:17 +0000 (10:58 +0200)]
Merge tag 'samsung-dt-6.6' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.6
1. Galaxy S II: correct LCD screen's physical size.
2. Add Samsung Galaxy Tab 3 8.0 boards (Exynos4212).
3. Galaxy S3 family: add USB connector and USB OTG. Full USB OTG still
seems not to work, but at least HDMI improved and dtbs_check is
happy.
4. Fix issues pointed out by dtbs_check and W=1: unit addresses, use
'gpios' suffix over 'gpio', update i2c-arb device node to newer
binding.
5. Few white-space cleanups.
* tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
ARM: dts: samsung: exynos5250-snow: switch i2c-arb to new child variant
ARM: dts: samsung: exynos5250-snow: use 'gpios' suffix for i2c-arb
ARM: dts: samsung: fix Exynos4212 Tab3 makefile entries
ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
ARM: dts: s5pv210: minor whitespace cleanup around '='
ARM: dts: exynos: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230810151250.220202-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:57:42 +0000 (10:57 +0200)]
Merge tag 'samsung-dt64-6.6' of https://git./linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.6
1. Add dedicated compatibles for PWM block.
2. Add PWM to ExynosAutov9 SADK board.
3. Few white-space and other cleanups.
* tag 'samsung-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: exynos5433-tm2: drop redundant status=okay
arm64: dts: exynos: add pwm node for exynosautov9-sadk
dt-bindings: pwm: samsung: add exynosautov9 compatible
arm64: dts: fsd: minor whitespace cleanup around '='
arm64: dts: exynos: minor whitespace cleanup around '='
arm64: dts: exynos: add missing space before {
Link: https://lore.kernel.org/r/20230810151250.220202-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:56:57 +0000 (10:56 +0200)]
Merge tag 'aspeed-6.6-devicetree-2' of git://git./linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.6
- New machines
* Inventec's Starscream AST2600 BMC, for a x86 server platform
* Meta's Yossemite 4 AST2600 BMC, for a multi-node server platform
- Big device tree rework for IBM's Power10 BMC platforms
- Updates for wedge400 and Mt Mitchell
- AST2600 I3C and VUART descriptions
* tag 'aspeed-6.6-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: Add AST2600 I3C control pins
ARM: dts: aspeed: everest: Move common devices up
ARM: dts: aspeed: everest: Reorganise FSI description
ARM: dts: aspeed: rainier: Reorganise FSI description
ARM: dts: aspeed: bonnell: Reorganise FSI description
ARM: dts: aspeed: Add P10 FSI descriptions
ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC
dt-bindings: arm: aspeed: add Facebook Yosemite 4 board
ARM: dts: aspeed: wedge400: Set eMMC max frequency
ARM: dts: aspeed: wedge400: Enable more ADC channels
ARM: dts: aspeed: Update spi alias in Facebook AST2500 Common dtsi
ARM: dts: aspeed: rainier: Remove TPM device
ARM: dts: aspeed: Add AST2600 VUARTs
ARM: dts: aspeed: mtmitchell: Add MCTP
ARM: dts: aspeed: mtmitchell: Update ADC sensors for Mt.Mitchell DVT systems
ARM: dts: aspeed: mtmitchell: Enable the BMC UART8 and UART9
ARM: dts: aspeed: Adding Inventec Starscream BMC
dt-bindings: arm: aspeed: add Inventec starscream-bmc
ARM: dts: aspeed: bonnell: Add DIMM SPD
Link: https://lore.kernel.org/r/CACPK8Xc76O5kLEAXRtbFXZcP=ObrKR0Kpez_er+zV2vZffZe7A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:56:09 +0000 (10:56 +0200)]
Merge tag 'omap-for-v6.6/dt-take2-signed' of git://git./linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.6
Updates for opp and pinctrl nodes to follow the devicetree bindings.
* tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: dts: ti: omap: Fix OPP table node names
arm: dts: ti: omap: am5729-beagleboneai: Drop the OPP
arm: dts: ti: omap: omap36xx: Rename opp_supply nodename
ARM: dts: ti: add missing space before {
ARM: dts: ti: split interrupts per cells
ARM: dts: Unify pinctrl-single pin group nodes for davinci
Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:53:27 +0000 (10:53 +0200)]
Merge tag 'omap-for-v6.6/dt-bindings-signed' of git://git./linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree binding changes for omaps for v6.6
Just one change to get started on SoC yaml binding changes for omaps.
* tag 'omap-for-v6.6/dt-bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
dt-bindings: omap: Partially convert omap.txt to yaml
Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:46:57 +0000 (10:46 +0200)]
Merge tag 'sunxi-dt-for-6.6-1' of https://git./linux/kernel/git/sunxi/linux into soc/dt
- Add D1 GPADC node
- Introduce support for OrangePi Zero 3 SBC
- Enable DT overlay support for Allwinner H3 boards
* tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices
arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name
arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT
riscv: dts: allwinner: d1: Add GPADC node
Link: https://lore.kernel.org/r/20230806180546.GA127039@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Fri, 4 Aug 2023 22:58:13 +0000 (16:58 -0600)]
arm64: dts: mediatek: Fix "status" values
The defined value for "status" is "disabled", not "disable".
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230804225813.12493-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:45:30 +0000 (10:45 +0200)]
Merge tag 'amlogic-arm64-dt-for-v6.6' of https://git./linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.6:
- Add initial support for A311D2
- Add AN400 board
- Add gpio_intc, power domain for C3 SoC
- Again some DT bindings fixes & cleanups
* tag 'amlogic-arm64-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: drop cooling-[min|max]-state from pwm-fan
arm64: dts: amlogic: meson-g12-common: change aobus-pinctrl node name
arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name
arm64: dts: amlogic: drop redundant status=okay in sound nodes
arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios
arm64: dts: add support for C3 power domain controller
arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs
arm64: dts: add board AN400
dt-bindings: arm: amlogic: add board AN400
arm64: dts: amlogic: minor whitespace cleanup around '='
arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree
dt-bindings: arm: amlogic: add Amlogic A311D2 bindings
Link: https://lore.kernel.org/r/d5f95654-ebcd-bd37-02f9-840e50b17e44@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:44:45 +0000 (10:44 +0200)]
Merge tag 'juno-update-6.6' of git://git./linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP update for v6.6
Just a single minor whitespace cleanup in couple of FVP device trees.
* tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804123223.3258086-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:44:02 +0000 (10:44 +0200)]
Merge tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx into soc/dt
arm64: ZynqMP DT changes for v6.6
- Describe caches
- Fix i2c gpio recovery description
- Setting up default i2c frequency
- Describe GEM TSU clock and assigned rates for SOMs
- Reserved 1MB for internal firmware usage
- Fix dwc3 IRQ description
- Describe interrupts by using macros
* tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Describe interrupts by using macros
arm64: zynqmp: Fix dwc3 usb interrupt description
arm64: zynqmp: Add memory reserved node for k26 Kria SOM board
arm64: zynqmp: Assign TSU clock frequency for GEMs
arm64: zynqmp: Setting default i2c clock frequency to 400kHz
arm64: zynqmp: Fix open drain warning on ZynqMP
arm64: zynqmp: Add L2 cache nodes
Link: https://lore.kernel.org/r/fde6d7b4-c751-219d-3ec5-04e5bad2aa17@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:43:22 +0000 (10:43 +0200)]
Merge tag 'hisi-arm32-dt-for-6.6' of https://github.com/hisilicon/linux-hisi into soc/dt
ARM: DT: HiSilicon ARM32 DT updates for v6.6
- Fix "status" values
* tag 'hisi-arm32-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: Fix "status" values
Link: https://lore.kernel.org/r/64CC9B21.70907@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:42:44 +0000 (10:42 +0200)]
Merge tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v6.6
- Miscellaneous fixes according the DTS coding style
- Correct the clocks order of the sd0 for the hi3798cv200
* tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hi3798cv200: Fix clocks order of sd0
arm64: dts: hisilicon: add missing space before {
arm64: dts: hisilicon: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/64CC99A3.5030701@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:42:15 +0000 (10:42 +0200)]
Merge tag 'microchip-dt64-6.6' of https://git./linux/kernel/git/at91/linux into soc/dt
Microchip ARM64 device tree updates for 6.6
It contains:
- one cleanup patch that removes whitespaces around '='
* tag 'microchip-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804044132.231508-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:41:37 +0000 (10:41 +0200)]
Merge tag 'at91-dt-6.6' of https://git./linux/kernel/git/at91/linux into soc/dt
AT91 device tree updates for 6.6
It contains:
- TCB timer nodes adition for at91-sama5d3_ksz9477_evb board
- device tee cleanups
* tag 'at91-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: remove duplicated entries
ARM: dts: microchip: split interrupts per cells
ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5
ARM: dts: at91: ksz9477_evb: Add missing timer nodes
ARM: dts: at91-vinco: Fix "status" values
ARM: dts: microchip: add missing space before {
ARM: dts: microchip: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804044102.231448-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof Kozlowski [Sun, 30 Jul 2023 11:15:36 +0000 (13:15 +0200)]
ARM: dts: st: spear: split interrupts per cells
Each interrupt should be in its own cell. This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230730111536.98164-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 12 Aug 2023 08:39:59 +0000 (10:39 +0200)]
Merge tag 'renesas-dts-for-v6.6-tag1' of git://git./linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.6
- Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC,
- Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L
SMARC EVK development boards,
- Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs,
- Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC,
- Add LED support for the Spider development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: spider-cpu: Add GP LEDs
arm64: dts: renesas: r8a779f0: Add INTC-EX node
arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3
arm64: dts: renesas: r9a07g043: Add MTU3a node
ARM dts: renesas: armadillo800eva: Switch to enable-gpios
arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0
riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node
arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3
arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3
arm64: dts: renesas: Add missing space before {
ARM: dts: renesas: Add missing space before {
arm64: dts: renesas: Minor whitespace cleanup around '='
arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: r9a09g011: Add CSI nodes
arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
projects / platform / kernel / linux-rpi.git / log