Jakob Haufe [Sat, 13 Apr 2013 14:03:36 +0000 (11:03 -0300)]
upstream: [media] rc: Add rc-delock-61959
This adds the keytable for the remote that comes with the Delock 61959.
NEC protocol with address 0x866b.
Signed-off-by: Jakob Haufe <sur5r@sur5r.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 20 Apr 2013 11:57:41 +0000 (08:57 -0300)]
upstream: [media] CARDLIST.bttv: add new cards
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Fri, 19 Apr 2013 08:53:30 +0000 (05:53 -0300)]
upstream: [media] media: davinci: vpif_display: move displaying of error to approppraite place
this patch moves the displaying out error case "VPIF IRQ request failed\n"
when there is actual request_irq() fail.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Fri, 19 Apr 2013 08:53:29 +0000 (05:53 -0300)]
upstream: [media] media: davinci: vpif: remove unwanted header file inclusion
this patch removes unwanted header file inclusion and sorts
header alphabetically.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ondrej Zary [Sun, 14 Apr 2013 15:39:09 +0000 (12:39 -0300)]
upstream: [media] bttv: Add noname Bt848 capture card with 14MHz xtal
Add support for noname Bt848 capture-only card (3x composite, 1x S-VHS)
with 14MHz crystal:
http://www.rainbow-software.org/images/hardware/bt848_.jpg
14MHz PLL was not supported by bttv driver until now.
[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lars-Peter Clausen [Sat, 13 Apr 2013 08:25:59 +0000 (05:25 -0300)]
upstream: [media] media:adv7180: Use dev_pm_ops
Use dev_pm_ops instead of the deprecated legacy suspend/resume callbacks.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Scott Jiang [Fri, 12 Apr 2013 22:52:57 +0000 (19:52 -0300)]
upstream: [media] blackfin: add display support in ppi driver
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 12 Apr 2013 12:30:29 +0000 (09:30 -0300)]
upstream: [media] bttv: Add Adlink MPG24 entry to the bttv cardlist
Add a proper card entry for this device, rather than abusing entries that are
not-quite-right.
Regards,
Hans
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 2 May 2013 11:29:43 +0000 (08:29 -0300)]
upstream: [media] s5k6aa: Convert to devm_gpio_request_one()
Use the devm_gpio_request_one() managed function to simplify cleanup
code paths.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 2 May 2013 13:09:07 +0000 (10:09 -0300)]
upstream: [media] tvp514x: Fix double free
The tvp514x data structure is allocated using devm_kzalloc(). Freeing it
explictly would result in a double free. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 2 May 2013 11:34:30 +0000 (08:34 -0300)]
upstream: [media] mt9v032: Free control handler in cleanup paths
The control handler must be freed in the probe error path and in the
remove handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 2 May 2013 10:57:51 +0000 (07:57 -0300)]
upstream: [media] mt9p031: Use gpio_is_valid()
Replace the manual validity checks for the reset GPIO with the
gpio_is_valid() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Thu, 18 Apr 2013 21:35:39 +0000 (18:35 -0300)]
upstream: [media] mt9p031: Power down the sensor if no supported device has been detected
The mt9p031 driver first accesses the I2C device in its .registered()
method. While doing that it first powers the device up, but if probing
fails, it doesn't power the chip back down. This patch fixes that bug.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Inha Song [Fri, 2 May 2014 02:11:37 +0000 (11:11 +0900)]
ASoC: Samsung: standardize machine driver names
The machine driver name of the existing "exynos4-wm1811" is Inappropriate.
Codec is dependent on board, not SoC.
So, Change machine dirver name from "exynos4-wm1811" to "trats2-wm1811"
to be used in trats2.
Change-Id: I06149430562514485a10eb580ab722857662aa22
Signed-off-by: Inha Song <ideal.song@samsung.com>
Chanho Park [Wed, 21 May 2014 05:40:53 +0000 (14:40 +0900)]
dts: arm: exynos4412-trats2: define address/size-cells
This patch fixes compile warning when building a exynos4412-trats2.dtb.
The two field should be defined in the parent node.
Change-Id: I8cfab92992e8ebd3fb010c6bca73575c3d189f7f
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Andrzej Hajda [Thu, 29 May 2014 14:30:21 +0000 (16:30 +0200)]
drm/panel/s6e8aa0: add backlight support
The patch adds backlight support to s6e8aa0 panel.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Change-Id: I8cf8717c84da1619ceb8a0d841935255f917030d
Liu Peiwen [Mon, 19 May 2014 03:40:35 +0000 (11:40 +0800)]
DVB : frontend: enable no_poweroff to avoid firmware reloaded in xc5000 tuner
If open and close frontend cyclicly, firmware will be loaded repeatly without
no_poweroff setting, and TV service can not tolorate the waste of time of
loading firmware.
Change-Id: I8a2276424a283a9d52e512e61a055c5375e6c15c
Signed-off-by: Liu Peiwen <peiwen.liu@samsung.com>
Chen Zhen [Mon, 26 May 2014 05:53:17 +0000 (13:53 +0800)]
Sound: Odroid: add DT binding document for Odroid
This patch adds binding document for the Samsung OdroidX2/U3.
Change-Id: Ifd4cb398e939c14deb717bcb34d0ebb5a4cbb70e
Signed-off-by: Chen Zhen <zhen1.chen@samsung.com>
Changbing Xiong [Fri, 9 May 2014 04:54:11 +0000 (01:54 -0300)]
au0828: Cancel stream-restart operation if frontend is disconnected
If the tuner is already disconnected, It is meaningless to go on doing the
stream-restart operation, It is better to cancel this operation.
Change-Id: Ie63854352383cd300eb3626e63143e6a73d519d8
Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Stephen Warren [Wed, 4 Dec 2013 22:19:26 +0000 (15:19 -0700)]
ASoC: max98090: add DT binding document for MAX98090 CODEC
This binding mainly serves to document the list of input and output pins
that may be used in a sound card's audio routing table.
Change-Id: I95e020b542edd908627f60f4fac9d11c2ab6d2b7
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Chen Zhen [Fri, 23 May 2014 09:59:45 +0000 (17:59 +0800)]
ASoC: samsung: set clk_id to 0 to avoid misunderstanding
it's obviously that codec driver has no routing handle for clk_id,
so just supply 0 for it.
Change-Id: I29b14ef8110b580a52502497728c049284b050a1
Signed-off-by: Chen Zhen <zhen1.chen@samsung.com>
Jacek Pielaszkiewicz [Fri, 16 May 2014 10:35:54 +0000 (12:35 +0200)]
ebtables: ebtables support enable in Tizen linux-3.10.
Change-Id: Ib9650cf5fca7139a68af88edbcfb2f90777d8227
Signed-off-by: Jacek Pielaszkiewicz <j.pielaszkie@samsung.com>
Chen Zhen [Fri, 23 May 2014 09:03:31 +0000 (17:03 +0800)]
ASoC: samsung: set format constant in the dai_link
Change-Id: I93731b6d92954be19f752a2b4283a611e7a793de
Signed-off-by: Chen Zhen <zhen1.chen@samsung.com>
Jonghwa Lee [Fri, 9 May 2014 08:00:16 +0000 (17:00 +0900)]
sii9234: Power on sii9234 only when MHL cable is connected.
Change-Id: I9a1719f3e1f366bb9328fff48b6ada73022286e2
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Jonghwa Lee [Wed, 14 May 2014 01:36:00 +0000 (10:36 +0900)]
Revert "regulator: Handle suspend and resume of regulators"
This reverts commit
bdc1383dd59ea144e4acdb97c6077c09f371df78.
I revert the commit because it is not merged to ML.
Change-Id: I8c616af1429a4c53d263c99baa05d35e379635e5
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Jonghwa Lee [Thu, 15 May 2014 09:42:34 +0000 (18:42 +0900)]
PM / devfreq : Make exynos4 busfreq driver to use PPMU not DMC internal one.
This patch modifies exynos4 busfreq driver to use global PPMU not DMC block's
internal PMU. The PPMU has different event set with DMC's and it'll be more
adaquate to profile bus utilization.
Change-Id: Ia5f6801cf6081edf5c76cad2af86978843bdf91a
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Chen Zhen [Mon, 12 May 2014 06:17:37 +0000 (14:17 +0800)]
ASoC: samsung: use codec as master instead of I2S(slave)
In order to don't change the EPLL, the reasonable way is to make the
codec as master instead of i2s.
Signed-off-by: Chen Zhen <zhen1.chen@samsung.com>
Change-Id: Ia457d7625c9a87ac6c854176c0fe03f500923825
Signed-off-by: Chen Zhen <zhen1.chen@samsung.com>
Chanwoo choi [Wed, 14 May 2014 16:34:40 +0000 (01:34 +0900)]
clk: samsung: exynos4: Add ppmu clock's identical number
This patch add ppmu clock's identical number to get clock pointer on other
device driver through DT binding.
Change-Id: Ic55036e9c90409c8385dd365e75b4fbeefc0829c
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Saravana Kannan [Fri, 28 Feb 2014 03:38:57 +0000 (19:38 -0800)]
PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs
The current devfreq_update_status() has the following bugs:
- If previous frequency doesn't have a valid level, it does an out of bounds
access into the trans_table and causes memory corruption.
- When the new frequency doesn't have a valid level, the time spent in the
new frequency is counted towards the next valid frequency switch instead of
being ignored.
- The time spent on the previous frequency is added to the new frequency's
stats instead of the previous frequency's stats.
This patch fixes all of this.
Change-Id: I9e3bb6ac6490d8f2e4bca2fd0d082f2fbd4a5b2e
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Dan Carpenter [Wed, 14 May 2014 11:50:56 +0000 (20:50 +0900)]
PM / devfreq: create_freezable_workqueue() doesn't return an ERR_PTR
The create_freezable_workqueue() function returns a NULL on error and
not an ERR_PTR.
Change-Id: If805c1068d00d3a2e6897c890475e35c780ef8c7
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Paul Bolle [Wed, 13 Mar 2013 21:10:02 +0000 (21:10 +0000)]
PM / devfreq: fix typo "CPU_EXYNOS4.12" twice
Dependencies on CPU_EXYNOS4212 and CPU_EXYNOS4412 for the "ARM
Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" were added in commit
7b4050381127ae11fcfc74a106d715a5fbbf888a ("PM/Devfreq: Add Exynos4-bus
device DVFS driver for Exynos4210/4212/4412."). The tree (at that time,
v3.3, and currently) makes clear that this should have been dependencies
on SOC_EXYNOS4212 and SOC_EXYNOS4412.
Change-Id: Ica470368f1e609199a5454d0de9d0448de2bccd2
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Wei Yongjun [Fri, 22 Feb 2013 04:33:50 +0000 (04:33 +0000)]
PM / devfreq: fix missing unlock on error in exynos4_busfreq_pm_notifier_event()
Add the missing unlock before return from function
exynos4_busfreq_pm_notifier_event() in the error
handling case.
This issue introduced by commit 8fa938
(PM / devfreq: exynos4_bus: honor RCU lock usage)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Resolved path conflicts by MyungJoo Ham]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Change-Id: I6fed109f21b18b458d7f0311961a85f5b2ba4756
MyungJoo Ham [Tue, 5 Feb 2013 09:40:17 +0000 (09:40 +0000)]
PM / devfreq: add comments and Documentation
- Added missing ABI documents
- Added comments to clarify the objectives of functions
Change-Id: Ic2206ad6671156eedb28d450046e8e2ea876b18c
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Rajagopal Venkat [Tue, 8 Jan 2013 05:50:39 +0000 (05:50 +0000)]
PM / devfreq: account suspend/resume for stats
devfreq stats is not taking device suspend and resume into
account. Fix it.
Change-Id: I224e046c15b40a384e6c548c6bd569e90a877945
Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Abhilash Kesavan [Mon, 4 Feb 2013 12:14:48 +0000 (12:14 +0000)]
PM / devfreq: Add Exynos5-bus devfreq driver for Exynos5250
Exynos5-bus device devfreq driver monitors PPMU counters and
adjusts operating frequencies and voltages with OPP. ASV should
be used to provide appropriate voltages as per the speed group
of the SoC rather than using a constant 1.025V.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
[myungjoo.ham@samsung.com: minor style update]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Jonghwan Choi <jhbird.choi@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Change-Id: I9cfb1f88fc61623425f34013d7c0f3a9bb474c55
Abhilash Kesavan [Wed, 23 Oct 2013 12:01:44 +0000 (21:01 +0900)]
PM / devfreq: Move exynos4 devfreq driver into a new sub-directory
In anticipation of the new exynos5 devfreq and ppmu driver, create
an exynos sub-directory. Move the existing exynos4 devfreq driver
into the same.
Change-Id: I4734de3aa1da881996c580145cdc2f78d8df2553
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Chen Zhen [Mon, 12 May 2014 05:51:00 +0000 (13:51 +0800)]
ASoC: Samsung: reset the BUS clock divider ratio from 2 to 10
when codec work at master mode, the CDCLK was used to MCLK for codec,
but previous CDCLK was too big for max98090,so change its divider
ratio from 2 to 10,and now the CDCLK is 19.2MHz.
Change-Id: I6246cdc85e1b33b0c2bc2128135b27bbc7c00ccb
Signed-off-by: Chen Zhen <zhen1.chen@samsung.com>
Chen Zhen [Mon, 12 May 2014 05:36:52 +0000 (13:36 +0800)]
ASoC: max98090: change the pclk value and its division factor
when codec work at master mode,its MCLK was supported by CDCLK,so it's necessary
to change pclk and its division factor according to CDCLK.
Change-Id: I9e091b532b523e8788ce1ffe84bc40452bd52a19
Signed-off-by: Chen Zhen <zhen1.chen@samsung.com>
Marek Szyprowski [Thu, 15 May 2014 07:59:06 +0000 (09:59 +0200)]
packaging: update kernel version to 3.10.39
Recent rebase updated kernel base from 3.10.33 to 3.10.39, so update kernel version in the spec file too.
Change-Id: Ifc5239ea428e2178aa70ddd3b94364fdbb7ebadc
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Changbing Xiong [Mon, 12 May 2014 03:16:22 +0000 (11:16 +0800)]
ARM: odroidx2: Fix initialization failed of WinTV-Aero-M
During the initianlization of the tuner, driver will allocate 360K bytes from
atomic DMA coherent pool, which is bigger than default size of the pool that
kernel used, So we need to expand the pool.
Change-Id: If1f869db25913ce8d5b30f31130a587efbf5b9c9
Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Przemyslaw Kedzierski [Fri, 9 May 2014 10:36:21 +0000 (12:36 +0200)]
add net_cls cgroup
This patch adds net_cls cgroup.
It is needed for resourced.
Change-Id: I78ee6b2dbe34aa6ce9cacc203a0c378524d76bb6
Signed-off-by: Przemyslaw Kedzierski <p.kedzierski@samsung.com>
Marek Szyprowski [Fri, 9 May 2014 07:01:48 +0000 (09:01 +0200)]
tizen: update tizen_defconfig after usb2 phy backport
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I999a3507e29ecfa3a95f3cdd6ec746073da32a3d
Marek Szyprowski [Thu, 8 May 2014 08:06:34 +0000 (10:06 +0200)]
Tizen: update defconfig for Odroid X2 and U3 boards
New defconfig supports both Odroid X2 and U3, so renamed it
tizen_odroid_defconfig
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I19c966f05e92292ededd2f910cbf1190b5b2c45f
Marek Szyprowski [Thu, 8 May 2014 07:43:02 +0000 (09:43 +0200)]
ARM: dts: exynos4x12: refactor common Odroid defs and add OdroidU3 support
Moved most of the common definitions to exynos4412-odroid-common.dtsi
and created exynos4412-odroidu3.dts for OdroidU3 board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I30fcd329aff827e8c0e734ea6047782be03ed242
Marek Szyprowski [Wed, 7 May 2014 07:04:14 +0000 (09:04 +0200)]
usb: usb5303: add support for reference clock specified in device tree
USB3503 chip supports 8 values of reference clock. The value is
specified by REF_SEL[1:0] pins and INT_N line. This patch add support
for getting 'refclk' clock, enabling it and setting INT_N line according
to the value of the gathered clock. If no clock has been specified,
driver defaults to the old behaviour (assuming that clock has been
specified by REF_SEL pins from primary reference clock frequencies
table).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I3453e714f9a793640b8cb6c0b4ccf699661ec934
Marek Szyprowski [Thu, 8 May 2014 07:38:38 +0000 (09:38 +0200)]
ARM: dts: update exynos usb2 phy nodes to match mainline driver
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I9ac4bcd37e965b10d0add3030038635ec2d00130
Marek Szyprowski [Thu, 8 May 2014 05:45:59 +0000 (07:45 +0200)]
usb: s5p-ehci: add support for more than one usb phy
Based on 'usb: ehci-exynos: Change to use phy provided by the generic
phy framework' patch posted to usb ml.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I5f7574c0659905148f6e7af95ecd197e92e03d16
Marek Szyprowski [Wed, 7 May 2014 06:57:36 +0000 (08:57 +0200)]
drivers: phy: exynos4x12-phy: fix HSIC1 power on/off sequence
From experiments with real hardware, it seems that URSTCON bits for
HSIC0 and HSIC1 seems to be swapped, so updated macro definitions for
them. HSIC1 also requires enabling power to device phy to get properly
enabled (similar hack is already implemented for HSIC0).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Idcbe47f1a55d882394296837b9218e9f843e842c
Arnd Bergmann [Sat, 19 Apr 2014 03:21:41 +0000 (08:51 +0530)]
phy: exynos: fix building as a module
The top-level phy-samsung-usb2 driver may be configured as a
loadable module, which currently causes link errors because
of the dependency on the exynos{5250,4x12,4210}_usb2_phy_config
symbol. Solving this could be achieved by exporting these
symbols, but as the SoC-specific parts of the driver are not
currently built as modules, it seems better to just link
everything into one module and avoid the need for the export.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[backport from upstream commit
d1481832f1dbb9d10fab27269631a130fa082f03]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I07f3a7ee523c55fab023b6c03caa6fba31bdec9b
Kamil Debski [Thu, 6 Mar 2014 11:16:48 +0000 (12:16 +0100)]
phy: Add new Exynos USB 2.0 PHY driver
Add a new driver for the Exynos USB 2.0 PHY. The new driver uses the generic
PHY framework. The driver includes support for the Exynos 4x10 and 4x12
SoC families.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[backport from upstream commit
06fb01373cae0bbf9af3a2b49e29c4341a5ba311]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I1f76ba5ecc23a49eeeec3c9a834a1e7fcc844834
Marek Szyprowski [Thu, 8 May 2014 05:29:00 +0000 (07:29 +0200)]
Revert "phy: Add new Exynos USB PHY driver"
This reverts commit
9eaa4d2322f94704866fbd0cbce260ba8dcb6de2.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ib0644b766b0174cdec43cc483b5ccc7f9487f411
Marek Szyprowski [Thu, 8 May 2014 05:28:14 +0000 (07:28 +0200)]
Revert "phy: exynos-usb: Fix referenct counting"
This reverts commit
58ae84cefb54046335d9581f3d96e8a5b947a08b.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I3adfabef0633bdb8542940a506976afd12856f21
Marek Szyprowski [Thu, 8 May 2014 05:28:05 +0000 (07:28 +0200)]
Revert "phy: exynos: Change order of initialization of phy in power_on"
This reverts commit
dbd99235197ce37b37f5e0c04fe7465a655f9c47.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I010965a1deb88f01b8a8c07e2c56910f5d73b9d2
Marek Szyprowski [Thu, 8 May 2014 05:27:55 +0000 (07:27 +0200)]
Revert "phy: exynos-usb: Remove ref counting for additional reset for Exynos4212"
This reverts commit
f600e05157a6d3d38f87260f5caa88918cac129e.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Id87eb3479a353d34f58092973e2896bdacaf9c2a
Marek Szyprowski [Thu, 8 May 2014 05:27:43 +0000 (07:27 +0200)]
Revert "phy: exynos : add delay after reset phy for usb host"
This reverts commit
507ba96c49fe6e247dcb5a79e1aca7160def7254.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I57c35ef9ba7e3255562602662a81b3a8aa90461b
Marek Szyprowski [Thu, 8 May 2014 05:27:26 +0000 (07:27 +0200)]
Revert "phy: exynos4212-usb: Use refcount to power device PHY for HSIC0"
This reverts commit
16b990c41a9f1e31f4c51f66052a1c648a3c0b2e.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I49f69bf27d8226e05a3fb48c70b15f21e3685345
Marek Szyprowski [Wed, 7 May 2014 14:38:43 +0000 (16:38 +0200)]
drivers: of: add for_each_available_child_of_node() macro
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I7713121fa18e780df480c5a5c6ebfa0972424f6f
Grygorii Strashko [Sat, 19 Apr 2014 03:21:44 +0000 (08:51 +0530)]
phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
This fixes a regression on Keystone 2 platforms caused by patch
57303488cd37da58263e842de134dc65f7c626d5
"usb: dwc3: adapt dwc3 core to use Generic PHY Framework" which adds
optional support of generic phy in DWC3 core.
On Keystone 2 platforms the USB is not working now because
CONFIG_GENERIC_PHY isn't set and, as result, Generic PHY APIs stubs
return -ENOSYS always. The log shows:
dwc3 2690000.dwc3: failed to initialize core
dwc3: probe of 2690000.dwc3 failed with error -38
Hence, fix it by making NULL a valid phy reference in Generic PHY
APIs stubs in the same way as it was done by the patch
04c2facad8fee66c981a51852806d8923336f362 "drivers: phy: Make NULL
a valid phy reference".
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[backport from upstream commit
2b97789fa289d531e767d994a77e34ec58f328c4]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Iad7bfec8716de065eb2707a0fe9f123eed691c3f
Sergei Shtylyov [Sat, 19 Apr 2014 03:21:43 +0000 (08:51 +0530)]
phy: fix kernel oops in phy_lookup()
The kernel oopses in phy_lookup() due to 'phy->init_data' being NULL if we
register PHYs from a device tree probing driver and then call phy_get() on a
device that has no representation in the device tree (e.g. a PCI device).
Checking the pointer before dereferening it and skipping an interation if
it's NULL prevents this kernel oops.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[backport from upstream commit
743bb387a1edbf1ebbba6cf77c1af3e488886c39]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Iea16343af63965d19960fc8acf89e0a65b806440
Kamil Debski [Thu, 6 Mar 2014 11:16:47 +0000 (12:16 +0100)]
phy: core: Add devm_of_phy_get to phy-core
Adding devm_of_phy_get will allow to get phys by supplying a
pointer to the struct device_node instead of struct device.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[backport from upstream commit
b5d682f4eb76c98f2ca5658926df43dd05cf2c37]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ie1d75af85ef1072457074d94ab268c5d570ed930
Kamil Debski [Thu, 6 Mar 2014 11:16:46 +0000 (12:16 +0100)]
phy: core: Add an exported of_phy_get function
Previously the of_phy_get function took a struct device * and
was declared static. It was impossible to call it from
another driver and thus it was impossible to get phy defined
for a given node. The old function was renamed to _of_phy_get
and was left for internal use. of_phy_get function was added
and it was exported. The function enables to get a phy for
a given device tree node.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[backport from upstream commit
0b3f3b2c777a2f7d20c9826a190ffd5bbd288f8f]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Id5aef3fdb574ba269f938428375cc4e88e5e59c0
Hans de Goede [Mon, 17 Feb 2014 08:59:23 +0000 (14:29 +0530)]
phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
The phy-core allows phy_init and phy_power_on to be called multiple times,
but before this patch -ENOSUPP from phy_pm_runtime_get_sync would be
propagated to the caller for the 2nd and later calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[backport from upstream commit
767a1b5d6ec4ac5335dde17100880347ed154ce2]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: If65ef9e8d070b4f3d601e139a28246fab36cb40e
Hans de Goede [Mon, 17 Feb 2014 08:59:22 +0000 (14:29 +0530)]
phy-core: phy_get: Leave error logging to the caller
In various cases errors may be expected, ie probe-deferral or a call to
phy_get from a driver where the use of a phy is optional.
Rather then adding all sort of complicated checks for this, and/or adding
special functions like devm_phy_get_optional, simply don't log an error,
and let deciding if get_phy returning an error really should result in a
dev_err up to the caller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[backport from upstream commit
f40037fd3677ae240978f469cc4155bf3ca7c076]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Iafe801b4c0a2419abc8f20717a3f441a2d9a2ab1
Andrew Lunn [Tue, 4 Feb 2014 17:33:12 +0000 (18:33 +0100)]
drivers: phy: Add support for optional phys
Add devm_phy_optional_get and phy_optional_get, which should be used
when the phy is optional. They does not return an error when the phy
does not exist, rather they returns NULL, which is considered as a valid
phy, but results in NOPs when used with the consumer API.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
[backport from upstream commit
788a4d56ff378bff0b8e685d03a962b36903a149]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I76c9bb54d4bd11b742522c91c28f48b82ca4aa41
Matt Porter [Thu, 19 Dec 2013 14:23:02 +0000 (09:23 -0500)]
phy: add phy_get_bus_width()/phy_set_bus_width() calls
This adds a pair of APIs that allows the generic PHY subsystem to
provide information on the PHY bus width. The PHY provider driver may
use phy_set_bus_width() to set the bus width that the PHY supports.
The controller driver may then use phy_get_bus_width() to fetch the
PHY bus width in order to properly configure the controller.
Signed-off-by: Matt Porter <mporter@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[backport from upstream commit
8feed347d33bb630d426b9f2ed88cbdf9795f624]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I327ac9c7fb50d39e0351c15ea72b3748957ea03d
Andrew Lunn [Tue, 4 Feb 2014 17:33:11 +0000 (18:33 +0100)]
drivers: phy: Make NULL a valid phy reference
The common clock framework considers NULL a valid clock
reference. This makes handling optional clocks simple, in that if the
optional clock is not available, a NULL reference can be used in the
place of a real clock, simplifying the clock consumer.
Extend this concept to the phy consumer API. A NULL can be passed to
the release calls, the phy_init() and phy_exit() calls, and
phy_power_on() and phy_power_off() and a NOP is performed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
[backport from upstream commit
04c2facad8fee66c981a51852806d8923336f362]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I387a29962849f50fa8df1ab684babcbbe3227c84
Kishon Vijay Abraham I [Thu, 19 Dec 2013 14:31:44 +0000 (20:01 +0530)]
phy: phy-core.c: remove unnecessary initialization of local variables
There were a few places where variables are initialized unncessarily.
Remove those initializations.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[backport from upstream commit
d18c960430ca341e5c12a023c805ff8fd10032a6]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ib80f6930d91c01a1e2c9f70ae4e61519eadd37d1
Kishon Vijay Abraham I [Fri, 20 Dec 2013 05:06:49 +0000 (10:36 +0530)]
phy: phy-core: increment refcounting variables only on 'success'
Increment 'init_count' only if the 'init' callback succeeded and decrement
'init_count' only if the 'exit' callback succeded. Increment 'power_count'
only if 'power_on' callback succeded and if it failed disable the clocks using
phy_pm_runtime_put_sync(). Also decrement 'power_count' only if 'power_off'
callback succeded and if it failed do not disable the clocks.
Reported-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[backport from upstream commit
637d378cea0b463c466a61a6564cdd541d689af5]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I482404787fa520568d365fbc39ab81d812689f20
Felipe Balbi [Fri, 20 Dec 2013 21:00:48 +0000 (15:00 -0600)]
phy: core: properly handle failure of pm_runtime_get functions
In case pm_runtime_get*() fails, it still
increments pm usage counter, so we *must*
make sure to pm_runtime_put() even in those
cases.
This patch fixes that mistake the same way
usbcore treats those possible failures.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[backport from upstream commit
cedb7f89d1e1f631b7e5d920fe1ea7f742d07f79]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I8de0a4c76c5ad3de2d45996504f3f1aa716dc017
Dan Carpenter [Fri, 6 Dec 2013 12:21:19 +0000 (17:51 +0530)]
drivers: phy: tweaks to phy_create()
If this was called with a NULL "dev" then it lead to a NULL dereference
when we called dev_WARN(). I have changed it to WARN_ON() so that we
get a stack dump and can fix the caller.
The rest of this patch is just cleanup like returning directly instead
of having do-nothing gotos. Using descriptive labels instead of
GW-BASIC style "err0" and "err1". I also flipped the order of
put_device() and ida_remove() so they are a mirror reflection of the
order they were allocated.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[backport from upstream commit
52797d293287f5a98bd686616527b102b077ac39]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I695ba238d040b484d1be1f10f7752a7dac164aab
Sachin Kamat [Fri, 6 Dec 2013 12:21:18 +0000 (17:51 +0530)]
drivers: phy: Fix memory leak
'phy' was not being freed upon error in one of the cases.
Adjust the 'goto's to fix this.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[backport from upstream commit
c1b1731d2002b93857810aa5da856b43f46bb470]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I170f5d157e97077e50f059dbecdcb0877fd1a680
Marek Szyprowski [Wed, 7 May 2014 14:45:53 +0000 (16:45 +0200)]
drivers: phy: reset to mainline
ff764963479a1b18721ab96e531404c50fefe8b1
Change-Id: Ic98c8f884f28553dd50c91d441e605b4c0283aad
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Changbing Xiong [Sun, 4 May 2014 09:46:16 +0000 (17:46 +0800)]
ARM: odroidx2: update defconfig to support Hauppauge WinTV-Aero-M
This modification will build drivers of WinTV-Aero-M into kernel,
So that odroidx2 target could support this kind of tuner.
Change-Id: I0788bda220e7151249d553274050a2b523a34e41
Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Beomho Seo [Wed, 7 May 2014 05:30:18 +0000 (14:30 +0900)]
ARM: dts: trats2: remove property from nodes of keys
This patch removed interrupt-parent and interrupts propertoes from
nodes of the keys. Because they are not part of the device tree bindings.
Change-Id: I73af25dde2308769a453a43133cc65f33dd3aef0
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Jaehoon Chung [Wed, 7 May 2014 08:26:40 +0000 (17:26 +0900)]
mmc: dw_mmc-exynos: add the MMC_CAP_ERASE capability
To use the erase command, add the MMC_CAP_ERASE capability by default.
Change-Id: Ia9c600eafb08bebb7a60b3b3147a8c8baf303cd0
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Inki Dae [Wed, 30 Apr 2014 09:20:51 +0000 (18:20 +0900)]
drm/exynos: hdmi: fix dt broken issue
This patch resolves the issue that the use of existing dtb is broken.
This patch gets existing dt nodes directly and checks if existing dtb
should be supported or not.
For this, it adds a soc_ver varable to hdmi_context structure to distinguish
SoC version because it should get dt node corresponding to SoC correctly.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Tomasz Stanislawski [Wed, 30 Apr 2014 08:26:31 +0000 (17:26 +0900)]
Revert "drm/exynos: add mout_hdmi clock in hdmi driver to change parent"
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Tue, 1 Oct 2013 05:51:37 +0000 (14:51 +0900)]
drm/exynos: release unhandled page flip events at postclose.
This patch resolves a dead lock issue that could be incurred when
exynos_drm_crtc_dpms function was called.
The exynos_drm_crtc_dpms function waits for the completion of pended
page flip events. However, preclose callback - this releases all unhandled
page flip events - is called prior to the exynos_drm_crtc_dpms function call
when drm is closed. So at this time, this will make the exynos_drm_crtc_dpms
to wait infiniately for the completion of the page flip events.
This patch releases the unhandled page flip events at postclose instead
of preclose so that exynos_drm_crtc_dpms function can be waked up.
Changelog v2:
- fix a memory leak when drm is closed.
. it has a memory leak when a requeste page flip is handled after
drm_events_release() is called and before drm_fb_release()
is called. At this time, a drm_pending_event will not be freed.
So also this chage releases the drm_pending_event at postclose().
And it calls drm_vblank_put() for pair if there is any unhandled page
flip event.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Inki Dae [Mon, 28 Apr 2014 12:32:15 +0000 (21:32 +0900)]
ARM: config: tizen: update defconfig
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Akshu Agrawal [Mon, 28 Apr 2014 12:26:39 +0000 (21:26 +0900)]
drm/exynos: fimd: clear channel before enabling iommu
If any fimd channel was already active, initializing iommu will result
in a PAGE FAULT (e.e. u-boot could have turned on the display and
not disabled it before the kernel starts). This patch checks if any
channel is active before initializing iommu and disables it.
Changelog v2:
- consider SoC without SHADOWCON register
Signed-off-by: Akshu Agrawal <akshu.a@samsung.com>
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 28 Apr 2014 11:24:52 +0000 (20:24 +0900)]
ARM: dts: universal: fix display dt bindings
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 28 Apr 2014 11:22:51 +0000 (20:22 +0900)]
ARM: dts: trats: fix display dt bindings
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 28 Apr 2014 08:43:07 +0000 (17:43 +0900)]
ARM: dts: trats2: fix display dt bindings
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 28 Apr 2014 08:42:12 +0000 (17:42 +0900)]
drm/exynos: fimd: update dt bindings
This patch removes wrong dt bindings and adds new ones.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Wed, 2 Apr 2014 07:35:27 +0000 (16:35 +0900)]
drm/panel: add S6E8AA0 driver
The patch adds MIPI-DSI based S6E8AA0 AMOLED LCD panel driver.
Driver uses mipi_dsi bus to communicate with panel and exposes drm_panel
interface.
v2
- added bus error handling,
- set maxmimum DSI packet size on init,
- removed unsupported brightness drm_panel callbacks,
- minor improvements
v3
- switched to gpiod framework,
- minor fixes in error handling
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Wed, 26 Mar 2014 08:17:18 +0000 (09:17 +0100)]
drm/panel: add ld9040 driver
The patch adds LD9040 parallel RGB panel driver with SPI control interface.
The driver uses drm_panel framework.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Fri, 25 Apr 2014 09:43:08 +0000 (18:43 +0900)]
drm/exynos: remove MODULE_DEVICE_TABLE definitions
This patch removes MODULE_DEVICE_TABLE definition to of_device_id
of MIPI-DSI driver.
Eyxnos drm should be built as single module so these definitions
should be removed.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Apr 2014 09:41:36 +0000 (18:41 +0900)]
drm/exynos: add DSIM driver
The patch adds driver for Exynos DSI master (DSIM). It is a platform driver
which is registered as exynos_drm_display sub-driver of exynos_drm framework
and implements DRM encoder/connector pair.
It is also MIPI-DSI host driver and provides DSI bus for panels.
It interacts with its panel(s) using drm_panel framework.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Shobhit Kumar [Fri, 25 Apr 2014 09:38:44 +0000 (18:38 +0900)]
drm: add MIPI DSI encoder and connector types
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 28 Mar 2014 11:52:36 +0000 (12:52 +0100)]
drm/mipi_dsi: add flags to DSI messages
This patch adds flags field to mipi_dsi_msg structure and two flags:
- MIPI_DSI_MSG_REQ_ACK - request ACK from peripheral for given message,
- MIPI_DSI_MSG_USE_LPM - use Low Power Mode to transmit message.
The first flag is usually helpful during DSI diagnostic, the second
flag is required by some peripherals during configuration phase.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 28 Mar 2014 11:52:38 +0000 (12:52 +0100)]
drm/exynos: disallow fbdev initialization if no device is connected
This patch adds explicit check if there is a connector with
connected status before fbdev initialization. It prevents creation
of default fbdev 1024x768 which is unusable on panels with bigger resolutions.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Lespiau, Damien [Mon, 24 Mar 2014 15:53:10 +0000 (15:53 +0000)]
drm/exynos: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()
There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Thu, 20 Mar 2014 08:09:00 +0000 (17:09 +0900)]
drm/exynos: fimd: remove unused variable
The patch removes unused vidcon0 field from fimd_context structure.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Apr 2014 07:47:37 +0000 (16:47 +0900)]
drm/exynos: restore parallel output interface support
The patch adds parallel output interface to FIMD device driver.
It also restores support for panels initialized by boot loader,
but without proper kernel driver.
Driver uses video interface bindings to find connected panel.
It uses drm_panel interface to interact with the panel.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Fri, 25 Apr 2014 09:26:26 +0000 (18:26 +0900)]
drm/exynos: select DRM_PANEL
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Fri, 25 Apr 2014 09:26:10 +0000 (18:26 +0900)]
drm/panel: fix build error
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 28 Mar 2014 11:52:37 +0000 (12:52 +0100)]
drm/mipi_dsi: create dsi devices only for nodes with reg property
MIPI DSI host node can contain child nodes which are not DSI devices.
Checking for existence of reg property can be used to distinguish such nodes.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Wed, 4 Dec 2013 15:35:12 +0000 (16:35 +0100)]
drm: Add MIPI DSI bus support
MIPI DSI bus allows to model DSI hosts and DSI peripherals using the
Linux driver model. DSI hosts are registered by the DSI host drivers.
During registration DSI peripherals will be created from the children
of the DSI host's device tree node. Support for registration from
board-setup code will be added later when needed.
DSI hosts expose operations which can be used by DSI peripheral drivers
to access associated devices.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Alexandre Courbot [Tue, 21 Jan 2014 09:57:10 +0000 (18:57 +0900)]
drm/panel: add support for LG LD070WX3-SL01 panel
This panel is used by Tegra Note 7 and supported by the simple-panel
driver.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Alexandre Courbot [Tue, 21 Jan 2014 09:57:09 +0000 (18:57 +0900)]
drm/panel: add support for LG LH500WX1-SD03 panel
This panel is used by the NVIDIA SHIELD and supported by the
simple-panel driver.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>