Richard Fitzgerald [Thu, 7 Jan 2021 16:48:25 +0000 (16:48 +0000)]
spi: bcm2835: Set controller max_speed_hz
Set the struct spi_controller max_speed_hz. This is based on the
reported source clock frequency during probe. The maximum bus clock
is half the source clock (as per the code in bcm2835_spi_transfer_one).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210107164825.21919-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 13 Jan 2021 15:24:18 +0000 (15:24 +0000)]
Merge series "spi: sh-msiof: Advertize bit rate limits and actual speed" from Geert Uytterhoeven <geert+renesas@glider.be>:
Hi Mark,
This patch series makes the Renesas MSIOF SPI driver fill in actual
transfer speeds and controller limits, so the SPI core can take them
into account.
This has been tested on R-Car Gen2 and Gen3.
Thanks!
Geert Uytterhoeven (2):
spi: sh-msiof: Fill in spi_transfer.effective_speed_hz
spi: sh-msiof: Fill in controller speed limits
drivers/spi/spi-sh-msiof.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--
2.25.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Mark Brown [Wed, 13 Jan 2021 15:24:17 +0000 (15:24 +0000)]
Merge series "spi: cadence-quadspi: Add QSPI controller support for Intel LGM SoC" from "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@linux.intel.com>:
Add QSPI controller support for Intel LGM SoC.
Patches to move move bindings over to
"Documentation/devicetree/bindings/spi/" directory and also added compatible
Support for Intel platform.
dt-bindings: spi: cadence-qspi: Add support for Intel lgm-qspi
(earlier patch mail thread and Ack-by)
link: "https://lore.kernel.org/lkml/
5d6d1b85.
1c69fb81.96938.0315@mx.google.com/"
Reference:
https://lkml.org/lkml/2020/6/1/50
---
v9:
- Vignesh review comments address and update
- Retain the patchv4 move the binding documentation from mtd to spi
directory.
- Add intel's compatible string over the legacy documentation
- Remove unused variable, CQSPI_SUPPORTS_MULTI_CHIPSELECT macro and check
- YAML convertion patch alone dropped
v8:
- As Mark suggested to add the dt-bindings documentation patches
end of the series , so dropped.
v7:
- Rob's review comments address and fixed dt-schema warning
- Pratyush review comments address and update
- DAC bit reset to 0 and 1 (enable/disable)
- tested QSI-NOR flash mx25l12805d on LGM soc, it's working after disable DAC
- Linus suggested to use 'num-cs' prperty instead of 'num-chipselect'
v6:
- Rob's review comments update
- add compatible string in properly aligned
- remove cadence-qspi extra comaptible string in example
v5:
- Rob's review comments update
- const with single compatible string kept
v4:
- Rob's review comments update
- remove '|' no formatting to preserve
- child node attributes follows under 'properties' under '@[0-9a-f]+$'.
v3:
- Pratyush review comments update
- CQSPI_SUPPORTS_MULTI_CHIPSELECT macro used instead of cqspi->use_direct_mode
- disable DAC support placed in end of controller_init
v2:
- Rob's review comments update for dt-bindings
- add 'oneOf' for compatible selection
- drop un-neccessary descriptions
- add the cdns,is-decoded-cs and cdns,rclk-en properties as schema
- remove 'allOf' in not required place
- add AdditionalProperties false
- add minItems/maxItems for qspi reset attributes
resend-v1:
- As per Mark's suggestion , reorder the patch series 1-3 driver
support patches, series 4-6 dt-bindings patches.
v1:
- initial version
Ramuthevar Vadivel Murugan (5):
spi: cadence-quadspi: Add QSPI support for Intel LGM SoC
spi: cadence-quadspi: Disable the DAC for Intel LGM SoC
spi: cadence-quadspi: Add multi-chipselect support for Intel LGM SoC
spi: Move cadence-quadspi.txt to Documentation/devicetree/bindings/spi
dt-bindings: spi: cadence-qspi: Add support for Intel lgm-qspi
.../bindings/{mtd => spi}/cadence-quadspi.txt | 1 +
drivers/spi/Kconfig | 2 +-
drivers/spi/spi-cadence-quadspi.c | 24 ++++++++++++++++++----
3 files changed, 22 insertions(+), 5 deletions(-)
rename Documentation/devicetree/bindings/{mtd => spi}/cadence-quadspi.txt (97%)
--
2.11.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Marek Vasut [Mon, 4 Jan 2021 12:31:14 +0000 (13:31 +0100)]
spi: stm32: Simplify stm32h7_spi_prepare_fthlv()
Simplify stm32h7_spi_prepare_fthlv() function implementation,
no functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alain Volmat <alain.volmat@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Antonio Borneo <antonio.borneo@st.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Roman Guskov <rguskov@dh-electronics.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-spi@vger.kernel.org
Link: https://lore.kernel.org/r/20210104123114.261596-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stephen Boyd [Tue, 12 Jan 2021 00:13:01 +0000 (16:13 -0800)]
spi: spi-qcom-qspi: Use irq trigger flags from firmware
We don't need to force this to be trigger high here, as the firmware
properly configures the irq flags already. Drop it to save a line.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Cc: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210112001301.687628-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Yicong Yang [Wed, 13 Jan 2021 08:31:56 +0000 (16:31 +0800)]
spi: hisi-sfc-v3xx: extend version checking compatibility
Currently we use concrete version to determine the max_cmd_dword.
New entries should be added for compatible hardwares of new version
or on new platform, otherwise the device will use 16 dwords instead
of 64 even if it supports, which will degrade the performance.
This will decrease the compatibility and the maintainability.
Drop the switch-case statement of the version checking. Only version
less than 0x351 supports maximum 16 command dwords.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1610526716-14882-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Geert Uytterhoeven [Wed, 13 Jan 2021 10:19:16 +0000 (11:19 +0100)]
spi: sh-msiof: Fill in controller speed limits
Fill in the controller speed limits, so the SPI core can use them for
validating SPI transfers, and adjust or reject transfers when needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210113101916.1147695-3-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Geert Uytterhoeven [Wed, 13 Jan 2021 10:19:15 +0000 (11:19 +0100)]
spi: sh-msiof: Fill in spi_transfer.effective_speed_hz
Fill in the effective bit rate used for transfers, so the SPI core can
calculate instead of estimate delays.
Restore "reverse Christmas tree" order of local variables while adding
new variables.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210113101916.1147695-2-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Ramuthevar Vadivel Murugan [Tue, 24 Nov 2020 04:18:40 +0000 (12:18 +0800)]
dt-bindings: spi: cadence-qspi: Add support for Intel lgm-qspi
Add new vendor specific compatible string to check Intel's Lightning
Mountain(LGM) QSPI features enablement in cadence-quadspi driver.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201124041840.31066-6-vadivel.muruganx.ramuthevar@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ramuthevar Vadivel Murugan [Tue, 24 Nov 2020 04:18:39 +0000 (12:18 +0800)]
spi: Move cadence-quadspi.txt to Documentation/devicetree/bindings/spi
Move the Documentation/devicetree/bindings/mtd/cadence-quadspi.txt to
Documentation/devicetree/bindings/spi/
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201124041840.31066-5-vadivel.muruganx.ramuthevar@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ramuthevar Vadivel Murugan [Tue, 24 Nov 2020 04:18:38 +0000 (12:18 +0800)]
spi: cadence-quadspi: Add multi-chipselect support for Intel LGM SoC
Add multiple chipselect support for Intel LGM SoCs,
currently QSPI-NOR and QSPI-NAND supported.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Link: https://lore.kernel.org/r/20201124041840.31066-4-vadivel.muruganx.ramuthevar@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ramuthevar Vadivel Murugan [Tue, 24 Nov 2020 04:18:37 +0000 (12:18 +0800)]
spi: cadence-quadspi: Disable the DAC for Intel LGM SoC
On Intel Lightning Mountain(LGM) SoCs QSPI controller do not use
Direct Access Controller(DAC).
This patch adds a quirk to disable the Direct Access Controller
for data transfer instead it uses indirect data transfe
DAC bit resets to 1 so there is no need to explicitly set it.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Link: https://lore.kernel.org/r/20201124041840.31066-3-vadivel.muruganx.ramuthevar@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ramuthevar Vadivel Murugan [Tue, 24 Nov 2020 04:18:36 +0000 (12:18 +0800)]
spi: cadence-quadspi: Add QSPI support for Intel LGM SoC
Add QSPI controller support for Intel LGM SoC.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Link: https://lore.kernel.org/r/20201124041840.31066-2-vadivel.muruganx.ramuthevar@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lad Prabhakar [Thu, 7 Jan 2021 14:53:29 +0000 (14:53 +0000)]
spi: rpc-if: Gaurd .pm assignment with CONFIG_PM_SLEEP #ifdef check
With CONFIG_PM_SLEEP disabled the rpcif_spi_pm_ops variable is still
referenced and thus increasing the size of kernel.
Fix this issue by adding CONFIG_PM_SLEEP #ifdef check around the .pm
assignment (image size is critical on RZ/A SoC's where the SRAM sizes
range 4~5 MiB).
Fixes:
9584fc95cadc0 ("spi: rpc-if: Remove CONFIG_PM_SLEEP ifdefery")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Suggested-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210107145329.27966-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Fri, 8 Jan 2021 18:14:57 +0000 (23:44 +0530)]
spi: cadence-quadspi: Fix build warning on 32-bit platforms
The kernel test robot reports the following warning.
drivers/spi/spi-cadence-quadspi.c:966:24: warning: comparison of distinct pointer types ('typeof (len) *' (aka 'unsigned int *') and 'typeof (500UL) *' (aka 'unsigned long *')) [-Wcompare-distinct-pointer-types]
msecs_to_jiffies(max(len, 500UL)))) {
^~~~~~~~~~~~~~~
include/linux/minmax.h:58:19: note: expanded from macro 'max'
#define max(x, y) __careful_cmp(x, y, >)
^~~~~~~~~~~~~~~~~~~~~~
include/linux/minmax.h:42:24: note: expanded from macro '__careful_cmp'
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~~~~~~~
include/linux/minmax.h:32:4: note: expanded from macro '__safe_cmp'
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~~~~~~~
include/linux/minmax.h:18:28: note: expanded from macro '__typecheck'
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
1 warning generated.
This happens because size_t is unsigned long on 64-bit platforms like
arm64 but it is unsigned int on 32-bit platforms like arm. Omitting the
"UL" would result in a warning on 64-bit platforms. Squash it by type
casting the arguments to size_t using max_t(). This way builds on both
type of platforms can be satisfied. There is no chance of any truncation
since 500 is small enough to fit into both int and long.
Fixes:
f453f293979f ("spi: cadence-quadspi: Wait at least 500 ms for direct reads")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20210108181457.30291-1-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
YANG LI [Mon, 11 Jan 2021 09:26:29 +0000 (17:26 +0800)]
spi: spi-bcm-qspi: style: Simplify bool comparison
Fix the following coccicheck warning:
./drivers/spi/spi-bcm-qspi.c:884:5-34: WARNING: Comparison to bool
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Link: https://lore.kernel.org/r/1610357189-60031-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wolfram Sang [Fri, 8 Jan 2021 10:35:22 +0000 (11:35 +0100)]
spi: renesas,sh-msiof: Add r8a779a0 support
Document R-Car V3U (R8A779A0) SoC bindings.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210108103522.2025880-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Yanteng Si [Thu, 7 Jan 2021 11:57:04 +0000 (19:57 +0800)]
spi: Fix distinct pointer types warning for ARCH=mips
Fix a new warning report by build for make ARCH=MIPS allmodconfig:
drivers/spi/spi-cadence-quadspi.c: In function 'cqspi_direct_read_execute':
./include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
18 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
./include/linux/minmax.h:32:4: note: in expansion of macro '__typecheck'
32 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
./include/linux/minmax.h:42:24: note: in expansion of macro '__safe_cmp'
42 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
./include/linux/minmax.h:58:19: note: in expansion of macro '__careful_cmp'
58 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
drivers/spi/spi-cadence-quadspi.c:1153:24: note: in expansion of macro 'max'
1153 | msecs_to_jiffies(max(len, 500UL)))) {
| ^~~
"len" is unsigned,however,"500" is unsigned long.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20210107115704.3835282-1-siyanteng@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 6 Jan 2021 14:56:43 +0000 (14:56 +0000)]
Merge series "Add Tegra Quad SPI driver" from Sowjanya Komatineni <skomatineni@nvidia.com>:
This series adds Tegra210, Tegra186, and Tegra194 Quad SPI driver and
enables Quad SPI on Jetson Nano and Jetson Xavier NX.
QSPI controller is available on Tegra210, Tegra186 and Tegra194.
Tegra186 and Tegra194 has additional feature of combined sequence mode
where command, address and data can all be transferred in a single transfer.
Combined sequence mode is useful only when using DMA mode transfer.
This series does not have combined sequence mode feature as Tegra186/Tegra194
GPCDMA driver is not upstreamed yet.
This series includes
- dt-binding document
- QSPI driver for Tegra210/Tegra186/Tegra194
- Enables QSPI on Jetson Nano and Jetson Xavier NX.
Delta between patch versions:
[v5]: Simplified implementation in Patch-0006
[v4]: Updated dummy cycles implementation based on v3 feedback
- Added dummy_data bit field int spi_transfer to indicate corresponding
transfer is dummy bytes transfer.
- Updated Tegra QSPI transfer_one_message to identify dummy transfer and
to use HW supported dummy bytes transfer when dummy cycles are with in
Tegra QSPI supported max HW dummy cycles otherwise fallsback to transfer
dummy bytes from software.
- Updated dt-bindings based on v3 feedback.
[v3]: v2 has some mixed patches sent out accidentally.
v3 sends proper patches with fixes mentioned in v2.
[v2]: below v1 feedback
- Added SPI_MASTER_USES_HW_DUMMY_CYCLES flag for controllers supporting
hardware dummy cycles and skips dummy bytes transfer from software for
these controllers.
- Updated dt-binding doc with tx/rx tap delay properties.
- Added qspi_out clock to dt-binding doc which will be used later with
ddr mode support.
- All other v1 feedback on some cleanup.
Sowjanya Komatineni (9):
dt-bindings: clock: tegra: Add clock ID TEGRA210_CLK_QSPI_PM
dt-bindings: spi: Add Tegra Quad SPI device tree binding
MAINTAINERS: Add Tegra Quad SPI driver section
spi: tegra210-quad: Add support for Tegra210 QSPI controller
spi: spi-mem: Mark dummy transfers by setting dummy_data bit
spi: tegra210-quad: Add support for hardware dummy cycles transfer
arm64: tegra: Enable QSPI on Jetson Nano
arm64: tegra: Add QSPI nodes on Tegra194
arm64: tegra: Enable QSPI on Jetson Xavier NX
.../bindings/spi/nvidia,tegra210-quad.yaml | 117 ++
MAINTAINERS | 8 +
.../dts/nvidia/tegra194-p3509-0000+p3668-0000.dts | 12 +
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 28 +
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 12 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 5 +-
drivers/spi/Kconfig | 9 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-mem.c | 1 +
drivers/spi/spi-tegra210-quad.c | 1410 ++++++++++++++++++++
include/dt-bindings/clock/tegra210-car.h | 2 +-
include/linux/spi/spi.h | 2 +
12 files changed, 1604 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
create mode 100644 drivers/spi/spi-tegra210-quad.c
--
2.7.4
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:36 +0000 (13:17 -0800)]
spi: tegra210-quad: Add support for hardware dummy cycles transfer
Tegra Quad SPI controller hardware supports sending dummy bytes based
on programmed dummy clock cycles after the actual transfer bytes.
This patch adds this support of hardware dummy bytes transfer and
skips transfer of dummy bytes from the software.
For dummy cycles more than Tegra Quad SPI hardware maximum dummy
cycles limit, driver transfers dummy bytes from the software.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-7-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:35 +0000 (13:17 -0800)]
spi: spi-mem: Mark dummy transfers by setting dummy_data bit
This patch marks dummy transfer by setting dummy_data bit to 1.
Controllers supporting dummy transfer by hardware use this bit field
to skip software transfer of dummy bytes and use hardware dummy bytes
transfer.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-6-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:34 +0000 (13:17 -0800)]
spi: tegra210-quad: Add support for Tegra210 QSPI controller
Tegra SoC has a Quad SPI controller starting from Tegra210.
This patch adds support for Tegra210 QSPI controller.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-5-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:33 +0000 (13:17 -0800)]
MAINTAINERS: Add Tegra Quad SPI driver section
Add maintainers and mailing list entries to Tegra Quad SPI driver
section.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-4-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:32 +0000 (13:17 -0800)]
dt-bindings: spi: Add Tegra Quad SPI device tree binding
This patch adds YAML based device tree binding document for Tegra
Quad SPI driver.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-3-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sowjanya Komatineni [Mon, 21 Dec 2020 21:17:31 +0000 (13:17 -0800)]
dt-bindings: clock: tegra: Add clock ID TEGRA210_CLK_QSPI_PM
Tegra210 QSPI clock output has divider DIV2_SEL which will be enabled
when using DDR interface mode.
This patch adds clock ID for this to dt-binding.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:25 +0000 (00:14 +0530)]
spi: cadence-quadspi: Add DTR support
Double Transfer Rate (DTR) mode transfers data twice per clock cycle.
Add support for parsing DTR ops and set up the registers to allow it.
Most SPI NOR flashes expect 2 byte commands. Parse the 2-byte opcode
from SPI MEM and set it up in the CQSPI_REG_OP_EXT_LOWER register.
Increment the delay needed before issuing indirect writes because larger
delay is needed for DTR mode. With the current delay some writes end up
missing.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-8-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:24 +0000 (00:14 +0530)]
spi: cadence-quadspi: Wait at least 500 ms for direct reads
When performing a direct read via DMA the timeout for completion is set
equal to the read length. This is fine for larger reads. For a small
read like the Read Status Register command, the timeout would be 1 or 2
milliseconds. This is not enough to cover the overhead needed in setting
up DMA.
Make sure the timeout is at least 500 ms to allow DMA ample time to
finish. For reads larger than 500 bytes, the timeout will continue to be
equal to the read length.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201222184425.7028-7-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:23 +0000 (00:14 +0530)]
spi: cadence-quadspi: Implement a simple supports_op hook
The default SPI MEM supports_op hook rejects DTR ops by default. Add a
simple supports_op hook that very closely imitates the SPI MEM one. It
will be extended in later commits to allow DTR ops.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-6-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:22 +0000 (00:14 +0530)]
spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1
SPI MEM deals with dummy bytes but the controller deals with dummy
cycles. Multiplying bytes by 8 is correct if the dummy phase uses 1S
mode since 1 byte will be sent in 8 cycles. But if the dummy phase uses
4S mode then 1 byte will be sent in 2 cycles.
To correctly translate dummy bytes to dummy cycles, the dummy buswidth
also needs to be taken into account. Divide 8 by the buswidth to get the
correct multiplier for getting the number of cycles.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-5-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:21 +0000 (00:14 +0530)]
spi: cadence-quadspi: Set dummy cycles from STIG commands
If a command does not have an address phase it goes via the STIG path.
The dummy cycles are not initialized for the STIG commands. As a result,
STIG commands with dummy cycles will not work.
Initialize the dummy cycle field before issuing the STIG command to make
sure it is sent correctly. Move the code to calculate dummy cycle value
to a separate function so it is not repeated twice. DTR support will add
some more logic here to it is worth it to extract it out in a function.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-4-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:20 +0000 (00:14 +0530)]
spi: cadence-quadspi: Abort read if dummy cycles required are too many
The controller can only support up to 31 dummy cycles. If the command
requires more it falls back to using 31. This command is likely to fail
because the correct number of cycles are not waited upon. Rather than
silently issuing an incorrect command, fail loudly so the caller can get
a chance to find out the command can't be supported by the controller.
Fixes:
140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-3-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pratyush Yadav [Tue, 22 Dec 2020 18:44:19 +0000 (00:14 +0530)]
spi: cadence-quadspi: Set master max_speed_hz
As of commit
9326e4f1e5dd ("spi: Limit the spi device max speed to
controller's max speed"), the SPI device max speed is set to the
controller's max speed if it is larger. The Cadence QSPI controller does
not set the controller's max speed so it is left at its initial value of
0. This means the SPI device max speed is always set to 0.
The SPI device max speed is used to calculate the baud rate divider when
performing an operation. If this speed is 0, the default divider of 32
is used. No matter what speed is specified by the device tree property
'spi-max-frequency', the device will always operate at ref_clk / 32.
Fix this by setting master->max_speed_hz to the ref clock speed so the
correct divider can be calculated.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20201222184425.7028-2-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Thomas Bogendoerfer [Tue, 5 Jan 2021 14:02:49 +0000 (15:02 +0100)]
spi: txx9: Remove driver
CPU support for TX49xx is getting removed, so remove support SPI driver
for it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20210105140305.141401-5-tsbogend@alpha.franken.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Alexandru Ardelean [Mon, 4 Jan 2021 14:31:03 +0000 (16:31 +0200)]
spi: stm32: update dev_dbg() print format for SPI params
With the introduction of the 'include/uapi/linux/spi/spi.h' header, the
type of the macros are enforced to 'unsigned long int' via the _BITUL()
macro.
This causes some -Wformat warnings in the spi-stm32 driver.
This patch adds a double-negation operator to the bit-masks. Essentially,
the important values for debugging are 0 or 1, while masking them directly
would show 0 or BIT(x) values.
This way, the type of the arguments are automatically re-cast.
Fixes:
f7005142dace ("spi: uapi: unify SPI modes into a single spi.h header")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210104143103.56510-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adam Ford [Sat, 2 Jan 2021 11:54:11 +0000 (05:54 -0600)]
spi: renesas rpc-if: Update Add RZ/G2 to Kconfig description
The SPI driver for the Renesas RPC-IF is present on the RZ/G2
Series. Add that to the description.
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210102115412.3402059-3-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lad Prabhakar [Wed, 30 Dec 2020 14:57:08 +0000 (14:57 +0000)]
spi: rpc-if: Remove CONFIG_PM_SLEEP ifdefery
Use __maybe_unused for the suspend()/resume() hooks and get rid of
the CONFIG_PM_SLEEP ifdefery to improve the code.
Suggested-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Pavel Machek <pavel@denx.de>
Link: https://lore.kernel.org/r/20201230145708.28544-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Alexandru Ardelean [Mon, 21 Dec 2020 15:29:36 +0000 (17:29 +0200)]
spi: dt-bindings: document zero value for spi-{rx,tx}-bus-width properties
Following a change to the SPI framework, providing a value of zero for
'spi-rx-bus-width' and 'spi-tx-bus-width' is now possible and will
essentially mean that no RX or TX is allowed.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201221152936.53873-3-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dragos Bogdan [Mon, 21 Dec 2020 15:29:35 +0000 (17:29 +0200)]
spi: Add SPI_NO_TX/RX support
Transmit/receive only is a valid SPI mode. For example, the MOSI/TX line
might be missing from an ADC while for a DAC the MISO/RX line may be
optional. This patch adds these two new modes: SPI_NO_TX and
SPI_NO_RX. This way, the drivers will be able to identify if any of
these two lines is missing and to adjust the transfers accordingly.
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201221152936.53873-2-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Alexandru Ardelean [Mon, 21 Dec 2020 15:29:34 +0000 (17:29 +0200)]
spi: uapi: unify SPI modes into a single spi.h header
This change moves all the SPI mode bits into a separate 'spi.h' header in
uAPI. This is meant to re-use these definitions inside the kernel as well
as export them to userspace (via uAPI).
The SPI mode definitions have usually been duplicated between between
'include/linux/spi/spi.h' and 'include/uapi/linux/spi/spidev.h', so
whenever adding a new entry, this would need to be put in both headers.
They've been moved from 'include/linux/spi/spi.h', since that seems a bit
more complete; the bits have descriptions and there is the SPI_MODE_X_MASK.
This change also does a conversion of these bitfields to _BITUL() macro.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201221152936.53873-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marcin Wojtas [Wed, 23 Dec 2020 10:38:27 +0000 (12:38 +0200)]
spi: orion: enable support for switching CS every transferred byte
Some SPI devices, require toggling the CS every transferred byte.
Enable such possibility in the spi-orion driver.
Note that in order to use it, in the driver of a secondary device
attached to this controller, the SPI bus 'mode' field must be
updated with SPI_CS_WORD flag before calling spi_setup() routine.
In addition to that include a work-around - some devices, such as
certain models of SLIC (Subscriber Line Interface Card),
may require extra delay after CS toggling, so add a minimal
timing relaxation in relevant places.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Link: https://lore.kernel.org/r/20201223103827.29721-3-kostap@marvell.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marcin Wojtas [Wed, 23 Dec 2020 10:38:26 +0000 (12:38 +0200)]
spi: orion: enable clocks before spi_setup
The spi-orion driver disables its clocks whenever it is not used.
In usual case during boot (i.e. using SPI flash) it is not a problem,
as the child device driver is present and probed along with
spi_register_master() execution.
However in case the child device driver is not ready
(e.g. when its type is module_spi_driver) the spi_setup() callback
can be called after the spi-orion probe. It may happen,
that as a result there will be an attempt to access controller's
registers with the clocks disabled.
Prevent such situations and make sure the clocks are on,
each time the spi_setup() is called.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Link: https://lore.kernel.org/r/20201223103827.29721-2-kostap@marvell.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 28 Dec 2020 12:24:35 +0000 (12:24 +0000)]
Merge existing fixes from spi/for-5.11
Linus Torvalds [Sun, 27 Dec 2020 23:30:22 +0000 (15:30 -0800)]
Linux 5.11-rc1
Linus Torvalds [Sun, 27 Dec 2020 18:56:33 +0000 (10:56 -0800)]
proc mountinfo: make splice available again
Since commit
36e2c7421f02 ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.
Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits
40be821d627c..
b24c30c67863, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.
This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 27 Dec 2020 17:22:55 +0000 (09:22 -0800)]
Merge tag 'ntb-5.11' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"Bug fix for IDT NTB and Intel NTB LTR management support"
* tag 'ntb-5.11' of git://github.com/jonmason/ntb:
ntb: intel: add Intel NTB LTR vendor support for gen4 NTB
ntb: idt: fix error check in ntb_hw_idt.c
Linus Torvalds [Sun, 27 Dec 2020 17:14:32 +0000 (09:14 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a number of autobuild failures due to missing Kconfig
dependencies"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qat - add CRYPTO_AES to Kconfig dependencies
crypto: keembay - Add dependency on HAS_IOMEM
crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
Linus Torvalds [Sun, 27 Dec 2020 17:08:23 +0000 (09:08 -0800)]
Merge tag 'objtool-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix a segfault that occurs when built with Clang"
* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix seg fault with Clang non-section symbols
Linus Torvalds [Sun, 27 Dec 2020 17:06:10 +0000 (09:06 -0800)]
Merge tag 'locking-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes/updates:
- Fix static keys usage in module __init sections
- Add separate MAINTAINERS entry for static branches/calls
- Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing"
* tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Avoid bad tracing / lockdep interaction
jump_label/static_call: Add MAINTAINERS
jump_label: Fix usage in module __init
Linus Torvalds [Sun, 27 Dec 2020 17:03:41 +0000 (09:03 -0800)]
Merge tag 'timers-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Update/fix two CPU sanity checks in the hotplug and the boot code, and
fix a typo in the Kconfig help text.
[ Context: the first two commits are the result of an ongoing
annotation+review work of (intentional) tick_do_timer_cpu() data
races reported by KCSAN, but the annotations aren't fully cooked
yet ]"
* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
tick/sched: Remove bogus boot "safety" check
tick: Remove pointless cpu valid check in hotplug code
Linus Torvalds [Sun, 27 Dec 2020 17:00:47 +0000 (09:00 -0800)]
Merge tag 'sched-urgent-2020-12-27' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a context switch performance regression"
* tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Optimize finish_lock_switch()
Linus Torvalds [Sat, 26 Dec 2020 17:19:49 +0000 (09:19 -0800)]
mfd: ab8500-debugfs: Remove extraneous seq_putc
Commit
c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: Joe Perches <joe@perches.com>
Fixes:
886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 26 Dec 2020 04:17:40 +0000 (20:17 -0800)]
Merge tag 'pci-v5.11-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a tegra enumeration regression (Rob Herring)
- Fix a designware-host check that warned on *success*, not failure
(Alexander Lobakin)
* tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dwc: Fix inverted condition of DMA mask setup warning
PCI: tegra: Fix host link initialization
Nathan Chancellor [Sat, 26 Dec 2020 01:35:49 +0000 (18:35 -0700)]
mfd: ab8500-debugfs: Remove extraneous curly brace
Clang errors:
drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type]
}
^
drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '('
return 0;
^
drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}')
}
^
3 errors generated.
The cleanup in ab8500_interrupts_show left a curly brace around, remove
it to fix the error.
Fixes:
886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Lobakin [Tue, 22 Dec 2020 15:07:43 +0000 (15:07 +0000)]
PCI: dwc: Fix inverted condition of DMA mask setup warning
Commit
660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.
Fix this by inverting the condition.
[bhelgaas: join string to make it greppable]
Fixes:
660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation")
Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Rob Herring [Fri, 18 Dec 2020 14:39:05 +0000 (08:39 -0600)]
PCI: tegra: Fix host link initialization
Commit
b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common
code") broke enumeration of downstream devices on Tegra:
In non-working case (next-
20201211):
0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)
In working case (v5.10-rc7):
0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)
The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.
Fixes:
b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code")
Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org
Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Linus Torvalds [Fri, 25 Dec 2020 23:41:13 +0000 (15:41 -0800)]
drm/amd/display: avoid uninitialized variable warning
clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.
This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.
So just initialize 'val' to zero to avoid the issue.
Fixes:
110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Dec 2020 19:07:34 +0000 (11:07 -0800)]
Merge tag 'perf-tools-2020-12-24' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use
cases in ARM machines.
- Fix memory leak when synthesizing SDT probes in 'perf probe'.
- Update kernel header copies related to KVM, epol_pwait. msr-index and
powerpc and s390 syscall tables.
* tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits)
perf probe: Fix memory leak when synthesizing SDT probes
perf stat aggregation: Add separate thread member
perf stat aggregation: Add separate core member
perf stat aggregation: Add separate die member
perf stat aggregation: Add separate socket member
perf stat aggregation: Add separate node member
perf stat aggregation: Start using cpu_aggr_id in map
perf cpumap: Drop in cpu_aggr_map struct
perf cpumap: Add new map type for aggregation
perf stat: Replace aggregation ID with a struct
perf cpumap: Add new struct for cpu aggregation
perf cpumap: Use existing allocator to avoid using malloc
perf tests: Improve topology test to check all aggregation types
perf tools: Update s390's syscall.tbl copy from the kernel sources
perf tools: Update powerpc's syscall.tbl copy from the kernel sources
perf s390: Move syscall.tbl check into check-headers.sh
perf powerpc: Move syscall.tbl check to check-headers.sh
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools kvm headers: Update KVM headers from the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
...
Linus Torvalds [Fri, 25 Dec 2020 19:05:32 +0000 (11:05 -0800)]
Merge branch 'for-5.11' of git://git./linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall.
* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: Correct usage of make coccicheck
coccinelle: update expiring email addresses
coccinnelle: Remove ptr_ret script
kbuild: do not use scripts/ld-version.sh for checking spatch version
remove boolinit.cocci
Michael Ellerman [Fri, 25 Dec 2020 11:30:58 +0000 (22:30 +1100)]
genirq: Fix export of irq_to_desc() for powerpc KVM
Commit
64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") removed
the export of irq_to_desc() unless powerpc KVM is being built, because
there is still a use of irq_to_desc() in modular code there.
However it used:
#ifdef CONFIG_KVM_BOOK3S_64_HV
Which doesn't work when that symbol is =m, leading to a build failure:
ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined!
Fix it by checking for the definedness of the correct symbol which is
CONFIG_KVM_BOOK3S_64_HV_MODULE.
Fixes:
64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Dec 2020 18:54:29 +0000 (10:54 -0800)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
Linus Torvalds [Thu, 24 Dec 2020 22:20:33 +0000 (14:20 -0800)]
Merge tag 'docs-5.11-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A small set of late-arriving, small documentation fixes"
* tag 'docs-5.11-2' of git://git.lwn.net/linux:
docs: admin-guide: Fix default value of max_map_count in sysctl/vm.rst
Documentation/submitting-patches: Document the SoB chain
Documentation: process: Correct numbering
docs: submitting-patches: Trivial - fix grammatical error
Linus Torvalds [Thu, 24 Dec 2020 22:16:02 +0000 (14:16 -0800)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4; no new features this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
ext4: remove unnecessary wbc parameter from ext4_bio_write_page
ext4: avoid s_mb_prefetch to be zero in individual scenarios
ext4: defer saving error info from atomic context
ext4: simplify ext4 error translation
ext4: move functions in super.c
ext4: make ext4_abort() use __ext4_error()
ext4: standardize error message in ext4_protect_reserved_inode()
ext4: remove redundant sb checksum recomputation
ext4: don't remount read-only with errors=continue on reboot
ext4: fix deadlock with fs freezing and EA inodes
jbd2: add a helper to find out number of fast commit blocks
ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h
ext4: fix fall-through warnings for Clang
ext4: add docs about fast commit idempotence
ext4: remove the unused EXT4_CURRENT_REV macro
ext4: fix an IS_ERR() vs NULL check
ext4: check for invalid block size early when mounting a file system
ext4: fix a memory leak of ext4_free_data
ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()
ext4: update ext4_data_block_valid related comments
...
Linus Torvalds [Thu, 24 Dec 2020 22:08:43 +0000 (14:08 -0800)]
Merge tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next
Pull smack fix from Casey Schaufler:
"Provide a fix for the incorrect handling of privilege in the face of
io_uring's use of kernel threads. That invalidated an long standing
assumption regarding the privilege of kernel threads.
The fix is simple and safe. It was provided by Jens Axboe and has been
tested"
* tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next:
Smack: Handle io_uring kernel thread privileges
Linus Torvalds [Thu, 24 Dec 2020 22:05:05 +0000 (14:05 -0800)]
Merge tag 'riscv-for-linus-5.11-rc1' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt
"Avoid trying to initialize memory regions outside the usable range"
* tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix usage of memblock_enforce_memory_limit
Linus Torvalds [Thu, 24 Dec 2020 22:02:00 +0000 (14:02 -0800)]
Merge tag 'powerpc-5.11-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Four commits fixing various things in the new C VDSO code
- One fix for a 32-bit VMAP stack bug
- Two minor build fixes
Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer.
* tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too
powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO
powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO
powerpc/vdso: Block R_PPC_REL24 relocations
powerpc/smp: Add __init to init_big_cores()
powerpc/time: Force inlining of get_tb()
powerpc/boot: Fix build of dts/fsl
Linus Torvalds [Thu, 24 Dec 2020 21:50:23 +0000 (13:50 -0800)]
Merge tag 'irq-core-2020-12-23' of git://git./linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
Linus Torvalds [Thu, 24 Dec 2020 20:40:07 +0000 (12:40 -0800)]
Merge tag 'efi_updates_for_v5.11' of git://git./linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
Linus Torvalds [Thu, 24 Dec 2020 20:35:00 +0000 (12:35 -0800)]
Merge tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"All straight fixes, or a prep patch for a fix, either bound for stable
or fixing issues from this merge window. In particular:
- Fix new shutdown op not breaking links on failure
- Hold mm->mmap_sem for mm->locked_vm manipulation
- Various cancelation fixes (me, Pavel)
- Fix error path potential double ctx free (Pavel)
- IOPOLL fixes (Xiaoguang)"
* tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work()
io_uring: fix double io_uring free
io_uring: fix ignoring xa_store errors
io_uring: end waiting before task cancel attempts
io_uring: always progress task_work on task cancel
io-wq: kill now unused io_wq_cancel_all()
io_uring: make ctx cancel on exit targeted to actual ctx
io_uring: fix 0-iov read buffer select
io_uring: close a small race gap for files cancel
io_uring: fix io_wqe->work_list corruption
io_uring: limit {io|sq}poll submit locking scope
io_uring: inline io_cqring_mark_overflow()
io_uring: consolidate CQ nr events calculation
io_uring: remove racy overflow list fast checks
io_uring: cancel reqs shouldn't kill overflow list
io_uring: hold mmap_sem for mm->locked_vm manipulation
io_uring: break links on shutdown failure
Linus Torvalds [Thu, 24 Dec 2020 20:28:35 +0000 (12:28 -0800)]
Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few stragglers in here, but mostly just straight fixes. In
particular:
- Set of rnbd fixes for issues around changes for the merge window
(Gioh, Jack, Md Haris Iqbal)
- iocost tracepoint addition (Baolin)
- Copyright/maintainers update (Christoph)
- Remove old blk-mq fast path CPU warning (Daniel)
- loop max_part fix (Josh)
- Remote IPI threaded IRQ fix (Sebastian)
- dasd stable fixes (Stefan)
- bcache merge window fixup and style fixup (Yi, Zheng)"
* tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
md/bcache: convert comma to semicolon
bcache:remove a superfluous check in register_bcache
block: update some copyrights
block: remove a pointless self-reference in block_dev.c
MAINTAINERS: add fs/block_dev.c to the block section
blk-mq: Don't complete on a remote CPU in force threaded mode
s390/dasd: fix list corruption of lcu list
s390/dasd: fix list corruption of pavgroup group list
s390/dasd: prevent inconsistent LCU device data
s390/dasd: fix hanging device offline processing
blk-iocost: Add iocg idle state tracepoint
nbd: Respect max_part for all partition scans
block/rnbd-clt: Does not request pdu to rtrs-clt
block/rnbd-clt: Dynamically allocate sglist for rnbd_iu
block/rnbd: Set write-back cache and fua same to the target device
block/rnbd: Fix typos
block/rnbd-srv: Protect dev session sysfs removal
block/rnbd-clt: Fix possible memleak
block/rnbd-clt: Get rid of warning regarding size argument in strlcpy
blk-mq: Remove 'running from the wrong CPU' warning
Linus Torvalds [Thu, 24 Dec 2020 20:18:11 +0000 (12:18 -0800)]
Merge tag 'libnvdimm-for-5.11' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Twas the day before Christmas and the only thing stirring in libnvdimm
/ device-dax land is a pile of miscellaneous fixups and cleanups.
The bulk of it has appeared in -next save the last two patches to
device-dax that have passed my build and unit tests.
- Fix a long standing block-window-namespace issue surfaced by the
ndctl change to attempt to preserve the kernel device name over
a 'reconfigure'
- Fix a few error path memory leaks in nfit and device-dax
- Silence a smatch warning in the ioctl path
- Miscellaneous cleanups"
* tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Avoid an unnecessary check in alloc_dev_dax_range()
device-dax: Fix range release
device-dax: delete a redundancy check in dev_dax_validate_align()
libnvdimm/label: Return -ENXIO for no slot in __blk_label_update
device-dax/core: Fix memory leak when rmmod dax.ko
device-dax/pmem: Convert comma to semicolon
libnvdimm: Cleanup include of badblocks.h
ACPI: NFIT: Fix input validation of bus-family
libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels
ACPI/nfit: avoid accessing uninitialized memory in acpi_nfit_ctl()
Linus Torvalds [Thu, 24 Dec 2020 20:14:29 +0000 (12:14 -0800)]
Merge tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Xmas eve pull request present.
Just some fixes that trickled in this past week: Mostly amdgpu fixes,
with a dma-buf/mips build fix and some misc komeda fixes.
dma-buf:
- fix build on mips
komeda:
- fix commit tail operation order
- NULL pointer fix
- out of bounds access fix
ttm:
- remove an unused function
amdgpu:
- Vangogh SMU fixes
- Arcturus gfx9 fixes
- Misc display fixes
- Sienna Cichlid SMU update
- Fix S3 display memory leak
- Fix regression caused by DP sub-connector support
amdkfd:
- Properly require pcie atomics for gfx10"
* tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amd/display: Fix memory leaks in S3 resume
drm/amdgpu: Fix a copy-pasta comment
drm/amdgpu: only set DP subconnector type on DP and eDP connectors
drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfw
drm/amd/display: add getter routine to retrieve mpcc mux
drm/amd/display: always program DPPDTO unless not safe to lower
drm/amd/display: [FW Promotion] Release 0.0.47
drm/amd/display: updated wm table for Renoir
drm/amd/display: Acquire DSC during split stream for ODM only if top_pipe
drm/amd/display: Multi-display underflow observed
drm/amd/display: Remove unnecessary NULL check
drm/amd/display: Update RN/VGH active display count workaround
drm/amd/display: change SMU repsonse timeout to 2s.
drm/amd/display: gradually ramp ABM intensity
drm/amd/display: To modify the condition in indicating branch device
drm/amd/display: Modify the hdcp device count check condition
drm/amd/display: Interfaces for hubp blank and soft reset
drm/amd/display: handler not correctly checked at remove_irq_handler
drm/amdgpu: check gfx pipe availability before toggling its interrupts
drm/amdgpu: remove unnecessary asic type check
...
Linus Torvalds [Thu, 24 Dec 2020 20:09:48 +0000 (12:09 -0800)]
Merge tag 'devicetree-fixes-for-5.11-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Correct the JSON pointer syntax in binding schemas
- Drop unnecessary *-supply schema constraints
- Drop redundant maxItems/items on array schemas
- Fix various yamllint warnings
- Fix various missing 'additionalProperties' properties
* tag 'devicetree-fixes-for-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Drop redundant maxItems/items
dt-bindings: net: qcom,ipa: Drop unnecessary type ref on 'memory-region'
dt-bindings: Drop unnecessary *-supply schemas properties
dt-bindings/display: abt,y030xx067a: Fix binding
dt-bindings: clock: imx8qxp-lpcg: eliminate yamllint warnings
dt-bindings: display: eliminate yamllint warnings
dt-bindings: media: nokia,smia: eliminate yamllint warnings
dt-bindings: devapc: add the required property 'additionalProperties'
dt-bindings: soc: add the required property 'additionalProperties'
dt-bindings: serial: add the required property 'additionalProperties'
dt-bindings: xlnx,vcu-settings: fix dt_binding_check warnings
media: dt-bindings: coda: Add missing 'additionalProperties'
dt-bindings: Fix JSON pointers
Linus Torvalds [Thu, 24 Dec 2020 20:06:46 +0000 (12:06 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa sim refactoring
- virtio mem: Big Block Mode support
- misc cleanus, fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits)
vdpa: Use simpler version of ida allocation
vdpa: Add missing comment for virtqueue count
uapi: virtio_ids: add missing device type IDs from OASIS spec
uapi: virtio_ids.h: consistent indentions
vhost scsi: fix error return code in vhost_scsi_set_endpoint()
virtio_ring: Fix two use after free bugs
virtio_net: Fix error code in probe()
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()
tools/virtio: add barrier for aarch64
tools/virtio: add krealloc_array
tools/virtio: include asm/bug.h
vdpa/mlx5: Use write memory barrier after updating CQ index
vdpa: split vdpasim to core and net modules
vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov
vdpa_sim: make vdpasim->buffer size configurable
vdpa_sim: use kvmalloc to allocate vdpasim->buffer
vdpa_sim: set vringh notify callback
vdpa_sim: add set_config callback in vdpasim_dev_attr
vdpa_sim: add get_config callback in vdpasim_dev_attr
vdpa_sim: make 'config' generic and usable for any device type
...
Dan Williams [Thu, 24 Dec 2020 18:14:04 +0000 (10:14 -0800)]
Merge branch 'for-5.11/dax' into for-5.11/libnvdimm
Pull in miscellaneous device-dax fixups and cleanups for v5.11.
Zhen Lei [Sat, 19 Dec 2020 08:18:40 +0000 (16:18 +0800)]
device-dax: Avoid an unnecessary check in alloc_dev_dax_range()
Swap the calling sequence of krealloc() and __request_region(), call the
latter first. In this way, the value of dev_dax->nr_range does not need to
be considered when __request_region() failed.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201219081840.1149-2-thunder.leizhen@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Sat, 19 Dec 2020 02:41:41 +0000 (18:41 -0800)]
device-dax: Fix range release
There are multiple locations that open-code the release of the last
range in a device-dax instance. Consolidate this into a new
dev_dax_trim_range() helper.
This also addresses a kmemleak report:
# cat /sys/kernel/debug/kmemleak
[..]
unreferenced object 0xffff976bd46f6240 (size 64):
comm "ndctl", pid 23556, jiffies
4299514316 (age 5406.733s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 20 c3 37 00 00 00 .......... .7...
ff ff ff 7f 38 00 00 00 00 00 00 00 00 00 00 00 ....8...........
backtrace:
[<
00000000064003cf>] __kmalloc_track_caller+0x136/0x379
[<
00000000d85e3c52>] krealloc+0x67/0x92
[<
00000000d7d3ba8a>] __alloc_dev_dax_range+0x73/0x25c
[<
0000000027d58626>] devm_create_dev_dax+0x27d/0x416
[<
00000000434abd43>] __dax_pmem_probe+0x1c9/0x1000 [dax_pmem_core]
[<
0000000083726c1c>] dax_pmem_probe+0x10/0x1f [dax_pmem]
[<
00000000b5f2319c>] nvdimm_bus_probe+0x9d/0x340 [libnvdimm]
[<
00000000c055e544>] really_probe+0x230/0x48d
[<
000000006cabd38e>] driver_probe_device+0x122/0x13b
[<
0000000029c7b95a>] device_driver_attach+0x5b/0x60
[<
0000000053e5659b>] bind_store+0xb7/0xc3
[<
00000000d3bdaadc>] drv_attr_store+0x27/0x31
[<
00000000949069c5>] sysfs_kf_write+0x4a/0x57
[<
000000004a8b5adf>] kernfs_fop_write+0x150/0x1e5
[<
00000000bded60f0>] __vfs_write+0x1b/0x34
[<
00000000b92900f0>] vfs_write+0xd8/0x1d1
Reported-by: Jane Chu <jane.chu@oracle.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/160834570161.1791850.14911670304441510419.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Arnaldo Carvalho de Melo [Thu, 24 Dec 2020 13:52:10 +0000 (10:52 -0300)]
perf probe: Fix memory leak when synthesizing SDT probes
The argv_split() function must be paired with argv_free(), else we must
keep a reference to the argv array received or do the freeing ourselves,
in synthesize_sdt_probe_command() we were simply leaking that argv[]
array.
Fixes:
3b1f8311f6963cd1 ("perf probe: Add sdt probes arguments into the uprobe cmd string")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201224135139.GF477817@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:28 +0000 (16:13 +0200)]
perf stat aggregation: Add separate thread member
A separate field isn't strictly required. The core field could be
re-used for thread IDs as a single field was used previously.
But separating them will avoid confusion and catch potential errors
where core IDs are read as thread IDs and vice versa.
Also remove the placeholder id field which is now no longer used.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-13-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:27 +0000 (16:13 +0200)]
perf stat aggregation: Add separate core member
Add core as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-12-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:26 +0000 (16:13 +0200)]
perf stat aggregation: Add separate die member
Add die as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-11-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:25 +0000 (16:13 +0200)]
perf stat aggregation: Add separate socket member
Add socket as a separate member so that it doesn't have to be packed
into the int value.
When the socket ID was larger than 8 bits the output appeared corrupted
or incomplete.
For example, here on ThunderX2 'perf stat' reports a socket of -1 and an
invalid die number:
./perf stat -a --per-die
The socket id number is too big.
Performance counter stats for 'system wide':
S-1-D255 128 687.99 msec cpu-clock # 57.240 CPUs utilized
...
S36-D0 128 842.34 msec cpu-clock # 70.081 CPUs utilized
...
And with --per-core there is an entry with an invalid core ID:
./perf stat record -a --per-core
The socket id number is too big.
Performance counter stats for 'system wide':
S-1-D255-C65535 128 671.04 msec cpu-clock # 54.112 CPUs utilized
...
S36-D0-C0 4 28.27 msec cpu-clock # 2.279 CPUs utilized
...
This fixes the "Session topology" self test on ThunderX2.
After this fix the output contains the correct socket and die IDs and no
longer prints a warning about the size of the socket ID:
./perf stat --per-die -a
Performance counter stats for 'system wide':
S36-D0 128 169,869.39 msec cpu-clock # 127.501 CPUs utilized
...
S3612-D0 128 169,733.05 msec cpu-clock # 127.398 CPUs utilized
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-10-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:24 +0000 (16:13 +0200)]
perf stat aggregation: Add separate node member
Add node as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-9-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:23 +0000 (16:13 +0200)]
perf stat aggregation: Start using cpu_aggr_id in map
Use the new cpu_aggr_id struct in the cpu map instead of int so that it
can store more data.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-8-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:22 +0000 (16:13 +0200)]
perf cpumap: Drop in cpu_aggr_map struct
Replace usages of perf_cpu_map with cpu_aggr map in places that are
involved with 'perf stat' aggregation.
This will then later be changed to be a map of cpu_aggr_id rather than
an int so that more data can be stored.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-7-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:21 +0000 (16:13 +0200)]
perf cpumap: Add new map type for aggregation
Currently this is a duplicate of perf_cpu_map so that it can be used as
a drop in replacement.
In a later commit it will be changed from a map of ints to use the new
cpu_aggr_id struct.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-6-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:20 +0000 (16:13 +0200)]
perf stat: Replace aggregation ID with a struct
Replace all occurences of the usage of int with the new struct
cpu_aggr_id.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:19 +0000 (16:13 +0200)]
perf cpumap: Add new struct for cpu aggregation
This struct currently has only a single int member so that it can be
used as a drop in replacement for the existing behaviour.
Comparison and constructor functions have also been added that will
replace usages of '==' and '= -1'.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:18 +0000 (16:13 +0200)]
perf cpumap: Use existing allocator to avoid using malloc
Use the existing allocator for perf_cpu_map to avoid use of raw malloc.
This could cause an issue in later commits where the size of
perf_cpu_map is changed.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 26 Nov 2020 14:13:17 +0000 (16:13 +0200)]
perf tests: Improve topology test to check all aggregation types
Improve the topology test to check all aggregation types. This is to
lock down the behaviour before 'id' is changed into a struct in later
commits.
Committer testing:
$ perf test topology
41: Session topology: Ok
$
$ perf test -v topology
41: Session topology:
--- start ---
test child forked, pid 965552
templ file: /tmp/perf-test-mO7NtI
Problems creating module maps, continuing anyway...
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 2, socket 0
CPU 3, core 4, socket 0
CPU 4, core 5, socket 0
CPU 5, core 6, socket 0
CPU 6, core 8, socket 0
CPU 7, core 9, socket 0
CPU 8, core 10, socket 0
CPU 9, core 12, socket 0
CPU 10, core 13, socket 0
CPU 11, core 14, socket 0
CPU 12, core 0, socket 0
CPU 13, core 1, socket 0
CPU 14, core 2, socket 0
CPU 15, core 4, socket 0
CPU 16, core 5, socket 0
CPU 17, core 6, socket 0
CPU 18, core 8, socket 0
CPU 19, core 9, socket 0
CPU 20, core 10, socket 0
CPU 21, core 12, socket 0
CPU 22, core 13, socket 0
CPU 23, core 14, socket 0
test child finished with 0
---- end ----
Session topology: Ok
$
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tiezhu Yang [Wed, 23 Dec 2020 16:24:35 +0000 (13:24 -0300)]
perf tools: Update s390's syscall.tbl copy from the kernel sources
This silences the following tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
Just make them same:
cp arch/s390/kernel/syscalls/syscall.tbl tools/perf/arch/s390/entry/syscalls/syscall.tbl
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1608278364-6733-5-git-send-email-yangtiezhu@loongson.cn
[ There were updates after Tiezhu's post, so I just updated the copy ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tiezhu Yang [Wed, 23 Dec 2020 16:13:16 +0000 (13:13 -0300)]
perf tools: Update powerpc's syscall.tbl copy from the kernel sources
This silences the following tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
Just make them same:
cp arch/powerpc/kernel/syscalls/syscall.tbl tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1608278364-6733-4-git-send-email-yangtiezhu@loongson.cn
[ There were updates after Tiezhu's post, so I just updated the copy ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tiezhu Yang [Fri, 18 Dec 2020 07:59:22 +0000 (15:59 +0800)]
perf s390: Move syscall.tbl check into check-headers.sh
It is better to check syscall.tbl for s390 in check-headers.sh, it is
similar with commit
c9b51a017065 ("perf tools: Move syscall_64.tbl check
into check-headers.sh").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1608278364-6733-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tiezhu Yang [Fri, 18 Dec 2020 07:59:21 +0000 (15:59 +0800)]
perf powerpc: Move syscall.tbl check to check-headers.sh
It is better to check syscall.tbl for powerpc in check-headers.sh, it is
similar with commit
c9b51a017065 ("perf tools: Move syscall_64.tbl check
into check-headers.sh").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1608278364-6733-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 23:04:45 +0000 (20:04 -0300)]
tools headers UAPI: Synch KVM's svm.h header with the kernel
To pick up the changes from:
d1949b93c60504b3 ("KVM: SVM: Add support for CR8 write traps for an SEV-ES guest")
5b51cb13160ae0ba ("KVM: SVM: Add support for CR4 write traps for an SEV-ES guest")
f27ad38aac23263c ("KVM: SVM: Add support for CR0 write traps for an SEV-ES guest")
2985afbcdbb1957a ("KVM: SVM: Add support for EFER write traps for an SEV-ES guest")
291bd20d5d88814a ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Picking these new SVM exit reasons:
+ { SVM_EXIT_EFER_WRITE_TRAP, "write_efer_trap" }, \
+ { SVM_EXIT_CR0_WRITE_TRAP, "write_cr0_trap" }, \
+ { SVM_EXIT_CR4_WRITE_TRAP, "write_cr4_trap" }, \
+ { SVM_EXIT_CR8_WRITE_TRAP, "write_cr8_trap" }, \
+ { SVM_EXIT_VMGEXIT, "vmgexit" }, \
+ { SVM_VMGEXIT_MMIO_READ, "vmgexit_mmio_read" }, \
+ { SVM_VMGEXIT_MMIO_WRITE, "vmgexit_mmio_write" }, \
+ { SVM_VMGEXIT_NMI_COMPLETE, "vmgexit_nmi_complete" }, \
+ { SVM_VMGEXIT_AP_HLT_LOOP, "vmgexit_ap_hlt_loop" }, \
+ { SVM_VMGEXIT_AP_JUMP_TABLE, "vmgexit_ap_jump_table" }, \
And address this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 15:53:44 +0000 (12:53 -0300)]
tools kvm headers: Update KVM headers from the kernel sources
To pick the changes from:
8d14797b53f044fd ("KVM: arm64: Move 'struct kvm_arch_memory_slot' out of uapi/")
That don't causes any changes in tooling, only addresses this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 15:51:03 +0000 (12:51 -0300)]
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
To pick the changes in:
bf0cd88ce363a2de ("KVM: x86: emulate wait-for-SIPI and SIPI-VMExit")
That makes 'perf kvm-stat' aware of this new SIPI_SIGNAL exit reason,
thus addressing the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Yadong Qi <yadong.qi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 12:20:52 +0000 (09:20 -0300)]
tools headers UAPI: Sync kvm.h headers with the kernel sources
To pick the changes in:
fb04a1eddb1a65b6 ("KVM: X86: Implement ring-based dirty memory tracking")
That result in these change in tooling:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2020-12-21 11:55:45.
229737066 -0300
+++ after 2020-12-21 11:55:56.
379983393 -0300
@@ -90,6 +90,7 @@
[0xc0] = "CLEAR_DIRTY_LOG",
[0xc1] = "GET_SUPPORTED_HV_CPUID",
[0xc6] = "X86_SET_MSR_FILTER",
+ [0xc7] = "RESET_DIRTY_RINGS",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
Now one can use that string in filters when tracing ioctls, etc.
And silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 12:07:36 +0000 (09:07 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
Fixes:
69372cf01290b958 ("x86/cpu: Add VM page flush MSR availablility as a CPUID feature")
That cause these changes in tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2020-12-21 09:09:05.
593005003 -0300
+++ after 2020-12-21 09:12:48.
436994802 -0300
@@ -21,7 +21,7 @@
[0x0000004f] = "PPIN",
[0x00000060] = "LBR_CORE_TO",
[0x00000079] = "IA32_UCODE_WRITE",
- [0x0000008b] = "IA32_UCODE_REV",
+ [0x0000008b] = "AMD64_PATCH_LEVEL",
[0x0000008C] = "IA32_SGXLEPUBKEYHASH0",
[0x0000008D] = "IA32_SGXLEPUBKEYHASH1",
[0x0000008E] = "IA32_SGXLEPUBKEYHASH2",
@@ -286,6 +286,7 @@
[0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR",
[0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE",
[0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA",
+ [0xc001011e - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VM_PAGE_FLUSH",
[0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL",
[0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB",
[0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV",
$
The new MSR has a pattern that wasn't matched to avoid a clash with
IA32_UCODE_REV, change the regex to prefer the more relevant AMD_
prefixed ones to catch this new AMD64_VM_PAGE_FLUSH MSR.
Which causes these parts of tools/perf/ to be rebuilt:
CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
This addresses this perf tools build warning:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 12:04:54 +0000 (09:04 -0300)]
tools headers cpufeatures: Sync with the kernel sources
To pick the changes in:
69372cf01290b958 ("x86/cpu: Add VM page flush MSR availablility as a CPUID feature")
e1b35da5e624f8b0 ("x86: Enumerate AVX512 FP16 CPUID feature flag")
That causes only these 'perf bench' objects to rebuild:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 21 Dec 2020 12:03:04 +0000 (09:03 -0300)]
tools headers UAPI: Update epoll_pwait2 affected files
To pick the changes from:
b0a0c2615f6f199a ("epoll: wire up syscall epoll_pwait2")
That addresses these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>