Simon Glass [Sun, 8 May 2022 10:39:21 +0000 (04:39 -0600)]
dm: core: Fix addresses in the dm static command
This command converts pointers to addresses, but the pointers being
converted are in the image's rodata region. For sandbox this means it
is not in DRAM so it does not make sense to do this conversion.
Fix this by showing a simple pointer instead. Drop the unnecessary
@ and hex prefixes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 8 May 2022 10:39:20 +0000 (04:39 -0600)]
dm: core: Sort dm subcommands
Put these in alphabetic order, both in the help and in the implementation,
as there are quite a few subcommands now. Tweak the help for 'dm tree' to
better explain what it does.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 8 May 2022 10:39:19 +0000 (04:39 -0600)]
dm: core: Rename dm_dump_all()
This is not a good name anymore as it does not dump everything. Rename it
to dm_dump_tree() to avoid confusion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sat, 30 Apr 2022 09:26:23 +0000 (11:26 +0200)]
test: fix some pylint errors in test_bind.py
* Use spaces not tabs
* Limit lines to 100 spaces
* Remove an unused import
* Sort imports correctly
* Add a module description
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sat, 30 Apr 2022 05:55:53 +0000 (07:55 +0200)]
sandbox: raise SANDBOX_RAM_SIZE_MB default to 256
The UEFI Self Certification Test (SCT) cannot run on 128 MiB.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Sean Anderson [Fri, 29 Apr 2022 14:53:34 +0000 (10:53 -0400)]
patman: Fix defaults not propagating to subparsers
On python 3.8.10 (and 3.10), subparsers are not updated with defaults. I
suspect this is related to [1]. Fix this by explicitly updating
subparsers with settings.
[1] https://github.com/python/cpython/issues/89398
Fixes:
3145b63513 ("patman: Update defaults in subparsers")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Heinrich Schuchardt [Tue, 19 Apr 2022 16:46:36 +0000 (18:46 +0200)]
dm: fix formatting of uclass dump
Insert an empty line after each uclass independent of whether it has
devices or not.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Mon, 4 Apr 2022 20:45:04 +0000 (22:45 +0200)]
sandbox: show error if the device-tree cannot be loaded
U-Boot's printf() used before setting up U-Boot's serial driver does not
create any output. Use os_printf() for error messages related to loading
the device-tree.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Mon, 4 Apr 2022 20:45:03 +0000 (22:45 +0200)]
sandbox: add function os_printf()
Before setting up the devices U-Boot's printf() function cannot be used
for console output. Provide function os_printf() to print to stderr.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Alper Nebi Yasak [Sat, 2 Apr 2022 17:06:08 +0000 (20:06 +0300)]
patman: test_util: Print test stdout/stderr within test summaries
While running tests for a python tool, the tests' outputs get printed in
whatever order they happen to run, without any indication as to which
output belongs to which test. Unittest supports capturing these outputs
and printing them as part of the test summaries, but when a failure or
error occurs it switches back to printing as the tests run. Testtools
and subunit tests can do the same as their parts inherit from unittest,
but they don't outright expose this functionality.
On the unittest side, enable output buffering for the custom test result
class. Try to avoid ugly outputs by not printing stdout/stderr before
the test summary for low verbosity levels and for successful tests.
On the subunit side, implement a custom TestProtocolClient that enables
the same underlying functionality and injects the captured streams as
additional test details. This causes them to be merged into their test's
error traceback message, which is later rebuilt into an exception and
passed to our unittest report class.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Alper Nebi Yasak [Sat, 2 Apr 2022 17:06:07 +0000 (20:06 +0300)]
patman: test_util: Customize unittest test results for more info
By default, unittest test summaries only print extended info about tests
that failed or couldn't run due to an error. Use a custom text result
class to print info about more cases: skipped tests, expected failures
and unexpected successes.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Alper Nebi Yasak [Sat, 2 Apr 2022 17:06:06 +0000 (20:06 +0300)]
patman: test_util: Use unittest text runner to print test results
The python tools' test utilities handle printing test results, but the
output is quite bare compared to an ordinary unittest run. Delegate
printing the results to a unittest text runner, which gives us niceties
like clear separation between each test's result and how long it took to
run the test suite.
Unfortunately it does not print info for skipped tests by default, but
this can be handled later by a custom test result subclass. It also does
not print the tool name; manually print a heading that includes the
toolname so that the outputs of each tool's tests are distinguishable in
the CI output.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Alper Nebi Yasak [Sat, 2 Apr 2022 17:06:05 +0000 (20:06 +0300)]
patman: test_util: Handle nonexistent tests while loading tests
It's possible to request a specific test to run when trying to run a
python tool's tests. If we request a nonexistent test, the unittest
loaders generate a fake test that reports this as an error. However, we
get these fake tests even when the test exists, because test_util can
load tests from multiple places one by one and the test we want only
exists in one.
The test_util helpers currently remove these fake tests when printing
test results, but that's more of a workaround than a proper solution.
Instead, don't even try to load the missing tests.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Alper Nebi Yasak [Sat, 2 Apr 2022 17:06:04 +0000 (20:06 +0300)]
patman: test_util: Fix printing results for failed tests
When printing a python tool's test results, the entire list of failed
tests and their tracebacks are reprinted for every failed test. This
makes the test output quite unreadable. Fix the loop to print failures
and tracebacks one at a time.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Wed, 30 Mar 2022 16:26:40 +0000 (12:26 -0400)]
dm: core: Use device_foreach_child where possible
We have some nice macros for iterating over devices in device.h, but they
are not used by the driver core. Convert all the users I could find.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Sean Anderson [Mon, 28 Mar 2022 22:14:37 +0000 (18:14 -0400)]
dm: core: Provide fallbacks for ofnode_conf_read_...
Because fdt_get_config_str et al. were moved/renamed to
ofnode_conf_read_str, they now depend on CONFIG_DM as well as
CONFIG_OF_CONTROL. Add some fallback implementations, preventing a
linker error when CONFIG_SPL_OF_CONTROL and CONFIG_SPL_ENV_IS_IN_MMC are
enabled and CONFIG_SPL_DM is disabled.
Fixes:
7de8bd03c3 ("treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Sean Anderson [Wed, 23 Mar 2022 22:24:38 +0000 (18:24 -0400)]
sandbox: usb: Fix out-of-bounds read when fd=-1
sandbox_flash_bulk uses priv->read_len to determine if priv->buff contains
the response data (such as from SCSI_INQUIRY). However, if priv->fd=-1 in
handle_read, then priv->read_len is not set even though we are going to
PHASE_DATA. This causes sandbox_flash_bulk to try and read len bytes from
priv->buff, which likely goes past the end of the buffer. Fix this by always
setting priv->read_len even if we aren't going to read anything.
Fixes:
f4f715360c ("dm: usb: sandbox: Add an emulator for USB flash devices")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 19 Mar 2022 00:01:50 +0000 (18:01 -0600)]
dtoc: Update fdt tests to use test_util
Use the common functions to run tests and report results. Ensure that the
result code indicates success or failure.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Simon Glass [Sun, 13 Mar 2022 22:22:48 +0000 (16:22 -0600)]
bloblist: Describe the design goals
Add a comment explaining the design goals of bloblist, to make it easier
for people to understand and comment on the structure.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Mon, 27 Jun 2022 17:39:19 +0000 (13:39 -0400)]
Merge branch '2022-06-27-add-armv8-sha1-sha256-support' into next
To quote the author:
This series adds support for the SHA-1 and SHA-256 Secure Hash Algorithm
for CPUs that have support of the ARM v8 Crypto Extensions. It Improves
speed of integrity & signature checking procedures.
Tom Rini [Thu, 23 Jun 2022 19:44:47 +0000 (15:44 -0400)]
qemu_arm64: Enable CONFIG_ARMV8_CRYPTO support
Now that we can make use of CPU features for sha1/sha256, enable in QEMU
so that we get some test coverage.
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Tom Rini <trini@konsulko.com>
Loic Poulain [Wed, 1 Jun 2022 18:26:31 +0000 (20:26 +0200)]
armv8 SHA-256 using ARMv8 Crypto Extensions
This patch adds support for the SHA-256 Secure Hash Algorithm for CPUs
that have support for the SHA-256 part of the ARM v8 Crypto Extensions.
It greatly improves sha-256 based operations, about 17x faster on iMX8M
evk board. ~12ms vs ~208ms for a 20MiB kernel sha-256 verification.
asm implementation is a simplified version of the Linux version (from
Ard Biesheuvel).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain [Wed, 1 Jun 2022 18:26:30 +0000 (20:26 +0200)]
lib: sha256: Add support for hardware specific sha256_process
Mark sha256_process as weak to allow hardware specific implementation.
Add parameter for supporting multiple blocks processing.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain [Wed, 1 Jun 2022 18:26:29 +0000 (20:26 +0200)]
armv8 SHA-1 using ARMv8 Crypto Extensions:
This patch adds support for the SHA-1 Secure Hash Algorithm for CPUs
that have support for the SHA-1 part of the ARM v8 Crypto Extensions.
It greatly improves sha-1 based operations, about 10x faster on iMX8M
evk board. ~12ms vs ~165ms for a 20MiB kernel sha-1 verification.
asm implementation is a simplified version of the Linux version (from
Ard Biesheuvel).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain [Wed, 1 Jun 2022 18:26:28 +0000 (20:26 +0200)]
sha1: Fix digest state size/type
sha1 digest size is 5*32-bit => 160-bit. Using 64-bit unsigned long
does not cause issue with the current sha1 implementation, but could
be problematic for vectorized access.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain [Wed, 1 Jun 2022 18:26:27 +0000 (20:26 +0200)]
lib: sha1: Add support for hardware specific sha1_process
Mark sha1_process as weak to allow hardware specific implementation.
Add parameter to support for multiple blocks processing.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tom Rini [Mon, 27 Jun 2022 14:15:50 +0000 (10:15 -0400)]
Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2022.10
cpu:
- Add driver for microblaze cpu
net:
- Add support for DM_ETH_PHY to AXI emac and emaclite
xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS
zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize
versal:
- Enable loading app at EL1
serial:
- Setup default address and clock rates for DEBUG uarts
pinctrl:
- Add support for tri state and output enable properties
relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze
microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support
timer:
- Extract axi timer driver from Microblaze to generic location
Michal Simek [Thu, 23 Jun 2022 11:08:30 +0000 (13:08 +0200)]
timer: Add SPL_REGMAP dependency for Xilinx timer
Add SPL_REGMAP dependency when SPL is enabled. This can avoid compilation
issues if timer is selected but SPL_REGMAP not.
Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/8f6c187e04cb3127bf5148ae2dbbdf55b25ea544.1655982509.git.michal.simek@amd.com
Michal Simek [Thu, 23 Jun 2022 11:04:21 +0000 (13:04 +0200)]
xilinx: Enable support for SquashFS
Enable SquashFS for all xilinx platforms.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/dbe85afda8cd90ebfc537979d382808ff9bec160.1655982259.git.michal.simek@amd.com
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:50 +0000 (18:36 +0200)]
arm64: zynqmp: Move helper functions below header includes
Move helper functions in psu_init files below header includes to avoid
forward declarations.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-15-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:49 +0000 (18:36 +0200)]
tools: zynqmp_psu_init_minimize: Move helper functions below header includes
Move helper functions below header includes to avoid forward
declarations.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-14-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:48 +0000 (18:36 +0200)]
tools: zynqmp_psu_init_minimize: Use CR instead of LF
Use carriage return instead of line feed to support mangling across
lines.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-13-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:47 +0000 (18:36 +0200)]
tools: zynqmp_psu_init_minimize: Remove low level uart settings
There is no reason to do serial initialization. Uart driver does it
already based on DT. Good effect is that it is clear which interface is
console.
The resulting change was done in past by commit
84d2bbf082fa ("arm64:
zynqmp: Remove low level UART setting").
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-12-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:46 +0000 (18:36 +0200)]
xilinx: zynqmp: make spi flash support optional
The set_dfu_alt_info function use the CONFIG_SYS_SPI_U_BOOT_OFFS define
to set the dfu_alt_info environment variable for qspi boot mode. Guard
the usage of CONFIG_SYS_SPI_U_BOOT_OFFS to make spi flash support
optional.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-11-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:45 +0000 (18:36 +0200)]
xilinx: common: Separate display cpu info function
Move the print_cpuinfo function of CONFIG_DISPLAY_CPUINFO into its own
source file to support reuse by other board vendors.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-10-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:44 +0000 (18:36 +0200)]
xilinx: cpuinfo: Print soc machine
Print the soc machine in the print_cpuinfo function.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-9-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:43 +0000 (18:36 +0200)]
soc: xilinx: zynqmp: Add machine identification support
Add machine identification support based on the
zynqmp_get_silicon_idcode_name function and use the soc_get_machine
function of the soc uclass to get silicon idcode name for the fpga init.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-8-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:42 +0000 (18:36 +0200)]
soc: xilinx: zynqmp: Remove redundant checks for zynqmp_mmio_read
Remove the redundant SPL and CurrentEL checks for the zynqmp_mmio_read
function call because the function itself runs the same checks.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-7-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:41 +0000 (18:36 +0200)]
xilinx: zynqmp: Merge device lists
Merge the svd / xck devices into to the common zynqmp device list.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-6-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:40 +0000 (18:36 +0200)]
xilinx: zynqmp: Reuse shift macros to define masks
Reuse the shift macros to define the masks.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-5-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:39 +0000 (18:36 +0200)]
xilinx: zynqmp: Add macro for device type mask
Add a macro for the device type mask of the id code.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-4-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:38 +0000 (18:36 +0200)]
xilinx: zynqmp: Replace strncat with strlcat
Replace strncat with strlcat to always produce a valid null-terminated
string.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-3-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:37 +0000 (18:36 +0200)]
firmware: zynqmp: Probe driver before use
Probe the driver before use to ensure that the driver is always
available and the global data are valid. Initialize the global data
with zero and probe the driver if the global data are still zero. This
allows a usage of the firmware functions from other drivers with
arbitrary order between the drivers.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-2-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Stefan Herbrechtsmeier [Mon, 20 Jun 2022 16:36:36 +0000 (18:36 +0200)]
firmware: zynqmp: Check if rx channel dev pointer is valid
Check if rx channel dev pointer is valid and not if the address of the
pointer is valid.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-1-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Amit Kumar Mahapatra [Wed, 15 Jun 2022 10:22:41 +0000 (12:22 +0200)]
ARM: zynq: Fix size-cells for pl353 driver
"size-cells" of the nand controller node should be 0 as the "reg"
property of the nand device node contains the chip select number and not
address information.
The patch fixes the below compilation warning
arch/arm/dts/zynq-zc770-xm011.dtb: Warning (reg_format):
/axi/memory-controller@
e000e000/nand-controller@0,0/nand@0:reg: property
has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6e90665a2dad7fe8ade10b8f57101f8144963791.1655288559.git.michal.simek@amd.com
Ashok Reddy Soma [Wed, 15 Jun 2022 10:16:13 +0000 (12:16 +0200)]
arm64: zynqmp: Fix usb node drive strength and slew rate
As per design, all input/rx pins should have fast slew rate and 12mA
drive strength. Rest all pins should be slow slew rate and 4mA drive
strength. Fix usb nodes as per this and remove setting of slow slew rate
for all the usb gorup pins.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b245c165f05845c1f3ab41a92c82b7ec1538cee4.1655288171.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:16:32 +0000 (14:16 +0200)]
microblaze: Remove interrupt handler
The primary purpose for this code was timer. By converting it to
CONFIG_TIMER there is no code which uses this implementation that's why
remove it. If there is a need to handle interrupts this patch can be
reverted in future.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/5f2decc5a30a5678490ebde26d8c6f5a5f873cda.1654684731.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:16:32 +0000 (14:16 +0200)]
microblaze: Convert axi timer to DM driver
Move axi timer driver from Microblaze to generic location.
Origin implementation was irq based with counting down timer.
CONFIG_TIMER drivers are designed differently that timer is free running up
timer with automatic reload without any interrupt.
Information about clock rates are find out in timer_pre_probe() that's why
there is no need to get any additional information from DT in the driver
itself (only register offset).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/6c12fc86bbc1f17d05c25018862e7b7b03346b36.1654684731.git.michal.simek@amd.com
Ovidiu Panait [Tue, 31 May 2022 18:14:35 +0000 (21:14 +0300)]
cpu: add CPU driver for microblaze
Add a basic CPU driver that retrieves information about the microblaze CPU
core. cpu_ops handlers are implemented so that the "cpu" command can work
properly:
U-Boot-mONStR> cpu list
0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000
U-Boot-mONStR> cpu detail
0: cpu@0 MicroBlaze @ 50MHz, Rev: 11.0, FPGA family: zynq7000
ID = 0, freq = 50 MHz: L1 cache, MMU
Note: cpu_ver_lookup[] and family_string_lookup[] arrays were imported from
linux.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-14-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:34 +0000 (21:14 +0300)]
microblaze: add support for handling PVR data
Add helper code for PVR (Processor Version Register) data handling. It
will be used by the UCLASS_CPU driver to populate cpuinfo fields at
runtime.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-13-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:33 +0000 (21:14 +0300)]
microblaze: Kconfig: introduce XILINX_MICROBLAZE0_FPGA_FAMILY option
Provide a static Kconfig value for the target FPGA archtitecture, as it is
done in Linux. The cpu-uclass driver will cross-check it with the value
read from PVR10 register.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-12-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:32 +0000 (21:14 +0300)]
microblaze: cache: introduce flush_dcache_range()
Align microblaze with the other architectures and provide an
implementation for flush_dcache_range(). Also, remove the microblaze
exception in drivers/core/device.c.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-11-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:31 +0000 (21:14 +0300)]
microblaze: cache: introduce cpuinfo structure
Introduce a minimal cpuinfo structure to hold cache related info. The
instruction/data cache size and cache line size are initialized early in
the boot to default Kconfig values. They will be overwritten with data
from PVR/dtb if the microblaze UCLASS_CPU driver is enabled.
The cpuinfo struct was placed in global_data to allow the microblaze
UCLASS_CPU driver to also run before relocation (initialized global data
should be read-only before relocation).
gd_cpuinfo() helper macro was added to avoid volatile
"-Wdiscarded-qualifiers" warnings when using the pointer directly.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-10-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com> (s/bralid/brlid/)
Ovidiu Panait [Tue, 31 May 2022 18:14:30 +0000 (21:14 +0300)]
microblaze: cache: introduce flush_cache_all()
All flush_cache() calls in microblaze code are supposed to flush the
entire instruction and data caches, so introduce flush_cache_all()
helper to handle this.
Also, provide implementations for flush_dcache_all() and
invalidate_icache_all() so that icache and dcache u-boot commands can
work.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-9-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:29 +0000 (21:14 +0300)]
microblaze: cache: introduce Kconfig options for icache/dcache sizes
Replace XILINX_DCACHE_BYTE_SIZE macro with two Kconfig symbols for
instruction and data caches sizes, respectively:
CONFIG_XILINX_MICROBLAZE0_ICACHE_SIZE
CONFIG_XILINX_MICROBLAZE0_DCACHE_SIZE
Also, get rid of the hardcoded value in icache_disable().
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-8-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com> (s/bralid/brlid/g)
Ovidiu Panait [Tue, 31 May 2022 18:14:28 +0000 (21:14 +0300)]
microblaze: cache: split flush_cache() function
Factor out icache/dcache components from flush_cache() function. Call the
newly added __flush_icache()/__flush_dcache() functions inside
icache_disable() and dcache_disable(), respectively. There is no need to
flush both caches when disabling a particular cache type.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-7-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:27 +0000 (21:14 +0300)]
microblaze: cache: improve icache Kconfig options
Replace CONFIG_ICACHE with a Kconfig option more limited in scope -
XILINX_MICROBLAZE0_USE_WIC. It should be enabled if the processor supports
the "wic" (Write to Instruction Cache) instruction. It will be used to
guard "wic" invocations in microblaze cache code.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-6-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:26 +0000 (21:14 +0300)]
microblaze: cache: improve dcache Kconfig options
Replace CONFIG_DCACHE with a Kconfig option more limited in scope -
XILINX_MICROBLAZE0_USE_WDC. It should be enabled if the processor supports
the "wdc" (Write to Data Cache) instruction. It will be used to guard
"wdc" invocations in microblaze cache code.
Also, drop all ifdefs around flush_cache() calls and only keep one
CONFIG_IS_ENABLED() guard within flush_cache() itself.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-5-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:25 +0000 (21:14 +0300)]
microblaze: cache: replace XILINX_USE_DCACHE -> CONFIG_DCACHE
XILINX_USE_DCACHE macro was removed in
7556fa09e0e ("microblaze: Simplify
cache handling"), but it was still used in a couple of places.
Replace those occurences with CONFIG_DCACHE.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-4-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:24 +0000 (21:14 +0300)]
microblaze: start.S: remove unused code
in16/out16 routines seem to not be used anywhere in microblaze code, so
remove them.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-3-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:23 +0000 (21:14 +0300)]
cpu-uclass: relocate ops pointers for CONFIG_NEEDS_MANUAL_RELOC
Relocate cpu_ops pointers when CONFIG_NEEDS_MANUAL_RELOC is enabled.
The (gd->flags & GD_FLG_RELOC) check was added to make sure the reloc_done
logic works for drivers that use DM_FLAG_PRE_RELOC.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-2-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Ovidiu Panait [Tue, 31 May 2022 18:14:22 +0000 (21:14 +0300)]
cmd: cpu: migrate cpu command to U_BOOT_CMD_WITH_SUBCMDS()
Migrate cpu command to use U_BOOT_CMD_WITH_SUBCMDS() helper macro, to
reduce duplicated code. This also fixes the cpu command on boards that
enable CONFIG_NEEDS_MANUAL_RELOC.
Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-1-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Michal Simek [Fri, 24 Jun 2022 12:15:01 +0000 (14:15 +0200)]
microblaze: Add support for run time relocation
Microblaze is using NEEDS_MANUAL_RELOC from the beginnging. This is causing
issues with function pointer arrays which need to be updated manually after
relocation. Building code with -fPIC and linking with -pic will remove this
limitation and there is no longer need to run manual update.
By default still old option is enabled but by disabling NEEDS_MANUAL_RELOC
code will be compiled for full relocation.
The patch does couple of things which are connected to each other.
- Define STATIC_RELA dependency to call relocate-rela to fill sections.
- REMAKE_ELF was already enabled but u-boot file can't be used because
sections are empty. relocate-rela will fill them and output file is
u-boot.elf which should be used.
- Add support for full relocation (u-boot.elf)
- Add support for early relocation when u-boot.bin is loaded to different
address then CONFIG_SYS_TEXT_BASE
- Add rela.dyn and dynsym sections
Disabling NEEDS_MANUAL_RELOC U-Boot size increased by 10% of it's original
size (550kB to 608kB).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a845670b34925859b2e321875f7588a29f6655f9.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
tools: relocate-rela: Add support for 32bit Microblaze relocation
Microblaze is 32bit that's why it is using elf32 format. Relocation code
requires to get information about rela and dynsym senctions and also text
base which was used for compilation.
Code build with -fPIC and linked with -pic generates 4 relocation types.
R_MICROBLAZE_NONE is the easiest one which doesn't require any action.
R_MICROBLAZE_REL only requires write addend to r_offset address.
R_MICROBLAZE_32/R_MICROBLAZE_GLOB_DAT are the most complicated. There is a
need to find out symbol value with adding symbol value and write it to
address pointed by r_offset. Calculation with addend is also added but
only 0 addend values are generated now.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9912c3d76933bdf75e1ebb6aab43726cd32cafb5.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
tools: relocate-rela: Add support for elf32 decoding
Add support for 32bit ELF format which is used by Microblaze. Also check
that code runs only for Microblaze.
Function finds information about rela.dyn and dynsym which will be used
later for relocation.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7491cc72fe04cbd48db014f1492ce463e91dfb42.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
tools: relocate-rela: Check that relocation works only for EM_AARCH64
Relocation support is only for EM_AARCH64 that's why check machine type to
make sure that the code will never run on any unsupported one.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/36f26c8752335239344b265e5ddedad10e9cac8b.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
tools: relocate-rela: Extract elf64 reloc to special function
Adding support for new type requires to change code layout that's why move
elf64 code to own function for easier maintenance.
It also solves the problem with not calling fclose in case of error.
Return value from rela_elf64 is saved to variable that's why fclose() is
called all the time.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/21763b80527521c85ca7d4ac64ad6ff4885409c8.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
microblaze: Create SYM_ADDR macro to deal with symbols
Symbol handling depends on compilation flags. Right now manual relocation
is used that's why symbols can be referenced just by name and there is no
need to find them out. But when position independent code (PIC) is used
symbols need to be described differently. That's why having one macro
change is easier than changing the whole code.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d704e9a267c8b536452fb999111dbfbc9d652be5.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
microblaze: Add comment about reset location
Better to add comment to explain why reset vector points all the time to
origin U-Boot location.
If reset happens U-Boot should start from it's origin location.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/5ca6341b7487708247fe2948d7e496ea6f7c2e02.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
microblaze: Remove _start symbol handling at U-Boot start
Right now U-Boot runs all the time from the same address where it is loaded
but going to full relocation code starting address doesn't need to be fixed
and can be simply discovered from reading PC register. That's why use r20
to get PC address and subtract offset from the beginning to get starting
address.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/044b727c33dfbe662f68512d0da0775a4805f360.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
microblaze: Remove code around r20 in relocate_code()
r20 is not used that's why remove logic around it.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1b32bab5c050d099b2f6d49bc4896322ed03d788.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
microblaze: Optimize register usage in relocate_code
There are additional operations which can be done simpler that's why
improve logic around relocation address r7 handling and _start symbol.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c8b60f72f1605c2ba6b4b7be1893d7e6ec3d8597.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
microblaze: Change stack protection address to new stack address
SLR low address is still setup to 0 that's why only high limit should be
updated. STACK_SIZE macro is present and could be possible used for
low address alignment but it is not done by this patch.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c00cb843df848703b760a65934ed3ce31fafcf19.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:15:00 +0000 (14:15 +0200)]
microblaze: Separate code end substraction
Follow up patch will convert symbol handling that's why it is necessary to
separate logic around symbols to special instruction. It adds 4B for new
instruction but it is worth to do it to have code ready for for full
relocation.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/030863fa9a9c1ca0a9b082fe498522da09189fbc.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
microblaze: Enable REMAKE_ELF
Enable u-boot.elf recreation from u-boot.bin to prepare for removing manul
relocation. Enable option for big endian configuration but it is not used
too much that's why it is completely untested.
By supporting this system there is a need to define LITTLE/BIG endian
Kconfig options to pass -EL/-EB flags.
Full command line for u-boot.elf recreation looks like this:
microblazeel-xilinx-linux-gnu-objcopy -I binary -B microblaze \
-O elf32-microblazeel u-boot.bin u-boot-elf.o
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7e242a519fcd1c693b9103c5599b515af555ca43.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
mips: Move endianness selection to arch/Kconfig
This option will be used by Microblaze that's why move it to generic
location to be able to use it.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ceb39fa615cb5657b66a7b77bab99e86ca7a3346.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
microblaze: Fix typo in exception.c
Trivial fix.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c4ede6dc738c5bd7c518f3bb2c9410b15c102e20.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
microblaze: Remove CONFIG_TEXT_BASE from code
Use symbol instead macro to find where U-Boot starts.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d5d4c201bee6171e85b47783d916387d84db0456.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
microblaze: Fix early stack allocation
CONFIG_SYS_INIT_SP_OFFSET macro place stack to TEXT_BASE - SYS_MALLOC_F_LEN
but there is no reason to do it now because board_init_f_alloc_reserve()
returns exact location where stack should be. That's why stack location is
calculated at run time and there is no need to hardcode it via macro. This
change will help with placing U-Boot to any address.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e9aee69646e022fd8a96cbee2d2a07ab81fb6e05.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
microblaze: Fix stack protection behavior
When U-Boot starts stack protection can be already enabled that's why setup
the lowest possible SLR value which is address 0. And the highest possible
stack in front of U-Boot. That's why you should never load U-Boot to the
beginning of DDR. There must be some space reserved. Code is using this
location for early malloc space, early global data and stack.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/86b9748bad12142659804d6381bc6bbf20be44f1.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
microblaze: Switch absolute branches to relative
There is no reason to use absolute branches and use just relative. This
change helps with moving binary to different location and start it from
there.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/83a5103b85c1c2220cd3ab4d5365169c6660e40a.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
tools: relocate-rela: Read rela start/end directly from ELF
There is no need to pass section information via parameters.
Let's read text base and rela start/end directly from elf.
It will help with reading other information from ELF for others
architecture. Input to relocate-rela is u-boot binary and u-boot ELF.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ab7ae14a6e058722e8c608089729e98edf20a08d.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
tools: relocate-rela: Use global variables
Declare rela_start/end and text_base as global variables. It will help with
using these variables for ELF decoding.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7485b163e92f8f3f754c35f7c88c3314f2212efd.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
Makefile: Fix description for relocate-rela parameters
Numbers in comment are shifter which is visible from command which calls
them. Also relocate-rela usage is describing them.
"Usage: %s <bin file> <text base> <rela start> <rela end>"
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/bb0287b9071eb33eea0cf914a7128c2603684377.1655299267.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:59 +0000 (14:14 +0200)]
tools: relocate-rela: Open binary u-boot file later
There is no value to open u-boot binary file so early. Better to check all
values first and then open binary file.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9c2b4ebadbe83497db28af02f6af2623793ffdb6.1655299267.git.michal.simek@amd.com
Michal Simek [Wed, 15 Jun 2022 09:56:56 +0000 (11:56 +0200)]
arm64: zynqmp: Fix tps544/u3007 node description
u3007 is removed in zynqmp-m-a2197-02-revA board and on
zynqmp-m-a2197-03-revA it was renamed to v3022 at address 0x18.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f477796bcca6fce09168699a0498d792f4a54acf.1655287013.git.michal.simek@amd.com
Michal Simek [Wed, 15 Jun 2022 09:56:55 +0000 (11:56 +0200)]
arm64: zynqmp: Update tps53681 i2c address
TI manual (https://www.ti.com/lit/gpn/TPS53681) is saying that i2c address
is 7bit where c0h is 1100000 which is 0x60.
This will fix issues reported by make dtbs that 0xc0 is above 7bit regular
i2c address range.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2f50c1cd258f6b05deb2a6a9af7fa92952f3f8cb.1655287013.git.michal.simek@amd.com
Michal Simek [Wed, 15 Jun 2022 09:56:54 +0000 (11:56 +0200)]
arm64: zynqmp: Fix i2c addresses for vck190 SC
si570 is normally at 0x5d address and address is not aligned with address
in node.
8T49N240 can't be at 0xd8 that's why it is shifter by one bit.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4fa86fffa9cb8abe633fbc5a9c55bea249b5edfb.1655287013.git.michal.simek@amd.com
Ashok Reddy Soma [Wed, 15 Jun 2022 09:52:28 +0000 (11:52 +0200)]
pinctrl: zynqmp: Add support for output-enable and bias-high-impedance
Add support to handle 'output-enable' and 'bias-high-impedance'
configurations. DT property output-enable brings out the pins from
tri-state, whereas bias-high-impedance changes the pins state to
tri-state.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1a02cd41d183d397ebce23c497178281c7286692.1655286745.git.michal.simek@amd.com
Michal Simek [Fri, 24 Jun 2022 12:14:25 +0000 (14:14 +0200)]
arm64: zynqmp: Enable DP for kv260-revA board
DP is enabled for revB and should be enabled for kv260-revA too. Changes in
other boards were done by commit
8b82a3a7feb0 ("arm64: zynqmp: Enable DP
driver for SOMs").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4e273bce3a8acf4495b67b702b1704acec8d9ccb.1654779436.git.michal.simek@amd.com
Stefan Herbrechtsmeier [Tue, 7 Jun 2022 07:43:14 +0000 (09:43 +0200)]
xilinx: zynqmp: Do not use 0 as spl bss start address
Do not use 0 as address for memory because of the special meaning for
pointers (null pointer). Change the spl bss start address to the second
page.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220607074314.27125-1-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Michal Simek [Wed, 18 May 2022 10:49:26 +0000 (12:49 +0200)]
arm64: zynqmp: Add support for kr260 revA/B boards
Board is using kv260 design for couple of parts defined by spec like i2c
eeproms, ina260, uart, etc.
Board has 4 gems. One gem connected via PS SGMII(GT), another PS RGMII(MIO)
and 2 via EMIO. First two shares the same MIO lines for PHYs. PL based one
have separate EMIO lines via PL.
Also two USB 3.0 with usb hubs are present. USB phys and USB hubs should
have separate reset line. The first usb0 hub also has USB-SD controller
(usb2244) connected to port 0.
To test compatibility with k26 you can run:
fdtoverlay -o /tmp/output.dtb -i arch/arm/dts/zynqmp-sm-k26-revA.dtb \
arch/arm/dts/zynqmp-sck-kr-g-revA.dtbo
Also add support for kr260-revB board. Based on FRU it is revision B
but schematics can be label as revA03.
Changes in revB are:
- SFP light
- GEM2/3 TX_CLK fixes
- PMOD/RPI connector fixes
- Replace si5332 with oscilators
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/dac2ee1826e73b89c8cc1e430354eb43d291f675.1652870941.git.michal.simek@amd.com
Michal Simek [Mon, 6 Jun 2022 07:44:01 +0000 (09:44 +0200)]
serial: Setup serial base and freq for zynq/zynqmp
Setup default values for debug console, base address and frequency.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ce93efd3ed67aa6390810ce0b79e0d00e7c36b4b.1652871485.git.michal.simek@amd.com
Michal Simek [Mon, 6 Jun 2022 07:37:09 +0000 (09:37 +0200)]
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params()
It is useful to get information about BL type and entry address that's why
add some debug messages.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
Ashok Reddy Soma [Fri, 6 May 2022 05:53:45 +0000 (23:53 -0600)]
arm64: versal: Add support to load an app at EL1
Add support to switch to EL1 and load an EL1 app from U-Boot which is
executing at EL2 or EL3 in aarch64 mode.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220506055345.1921-1-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
T Karthik Reddy [Tue, 10 May 2022 11:26:11 +0000 (13:26 +0200)]
xilinx: Add CONFIG_DM_ETH_PHY config
Enable CONFIG_DM_ETH_PHY to utilize shared MDIO bus support on all xilinx
platforms.
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/965981eb324d13a98aad8bd88eb8b50bc5147a7e.1652181968.git.michal.simek@amd.com
T Karthik Reddy [Tue, 10 May 2022 11:26:10 +0000 (13:26 +0200)]
net: xilinx: axi_emaclite: Use shared MDIO bus support for axi emaclite driver
CONFIG_DM_ETH_PHY enables support to utilize generic ethernet phy
framework. Though if ethernet PHY node is in other ethernet node, it
will use shared MDIO to access the PHY of other ethernet. Move ethernet
print info statement from plat function to probe function, as phyaddr is
not enumerated when CONFIG_DM_ETH_PHY is enabled.
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/93e11ccca56b6e52b2dcc283d08d5042537f828f.1652181968.git.michal.simek@amd.com
T Karthik Reddy [Tue, 10 May 2022 11:26:09 +0000 (13:26 +0200)]
net: xilinx: axi_emac: Use shared MDIO bus support for axi emac driver
CONFIG_DM_ETH_PHY enables support to utilize generic ethernet phy
framework. Though if ethernet PHY node is in other ethernet node, it
will use shared MDIO to access the PHY of other ethernet. Move ethernet
print info statement from plat function to probe function, as phyaddr is
not enumerated when CONFIG_DM_ETH_PHY is enabled.
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/ecfec78234233fefdc172c141c207b2d78ef70c5.1652181968.git.michal.simek@amd.com
Tom Rini [Thu, 23 Jun 2022 18:30:27 +0000 (14:30 -0400)]
Merge branch '2022-06-23-scmi-optee-and-smccc-updates' into next
This consists of two slightly related series. For the first, to quote
the author:
This series implements 2 features in driver/firmware/scmi.
First, a single change adds support for SCMI OP-TEE transport to
use OP-TEE native shared memory. See the 1st patch in this series:
"firmware: scmi: optee: use TEE shared memory for SCMI messages".
Then come changes for supporting multi-channel in the SCMI drivers.
I've split the implementation in 11 several small incremental changes
in the hope it helps the review. Few minor fixup commits are also
inserted in the series.
And the second series implements some smccc improvements.
Tom Rini [Thu, 23 Jun 2022 18:24:24 +0000 (14:24 -0400)]
Merge branch '2022-06-23-fuzzing-and-asan-for-sandbox' into next
To quote the author:
This series introduces ASAN and a basic fuzzing infrastructure that
works with sandbox. The example fuzz test towards the end of the series
will find something pretty quickly. That something is fixed by the
series "virtio: Harden and test vring" that needs to be applied for the
final patch in this series.
There is some refactoring to stop using '.' prefixed sections. ELF
defines sections with names that contain anything that isn't
alphanumeric or an underscore as being for system use which means
clang's ASAN instrumentation happily add redzones between the contained
objects. That's not what we want for things like linker lists where the
linker script has carefully placed the sections contiguously. By
renaming the sections, clang sees them as user sections and doesn't add
instrumentation.
ASAN is left disabled by default as there are still some tests that it
triggers on and will need some more investigation to fix. It can be
enabled with CONFIG_ASAN or passing `-a ASAN` to buildman.