James Zern [Wed, 10 Jun 2015 19:22:41 +0000 (19:22 +0000)]
Merge "test/android/Android.mk: fix build w/ENABLE_SHARED=0"
James Zern [Wed, 10 Jun 2015 19:18:03 +0000 (19:18 +0000)]
Merge changes I89a8440f,Ifa3926e1
* changes:
libs.mk: relocate TEST_INTRA_PRED_SPEED_OBJS init
test_intra_pred_speed: remove #if w/in another macro
Paul Wilkins [Wed, 10 Jun 2015 13:33:52 +0000 (13:33 +0000)]
Merge "Changes to active maxq calculation in two pass."
Scott LaVarnway [Wed, 10 Jun 2015 13:15:18 +0000 (13:15 +0000)]
Merge "Reducing size of MODE_INFO struct"
James Zern [Wed, 10 Jun 2015 02:30:46 +0000 (19:30 -0700)]
libs.mk: relocate TEST_INTRA_PRED_SPEED_OBJS init
allows the visual studio project to be generated
Change-Id: I89a8440fb0bcaef11ff89dd967aa37bfe200758d
James Zern [Wed, 10 Jun 2015 02:30:04 +0000 (19:30 -0700)]
test_intra_pred_speed: remove #if w/in another macro
fixes the compile under visual studio
Change-Id: Ifa3926e198af97d73250540c6d0ef692f5e354ff
James Zern [Wed, 10 Jun 2015 02:27:20 +0000 (19:27 -0700)]
test/android/Android.mk: fix build w/ENABLE_SHARED=0
add a dependency on *_rtcd.h to ensure they're generated before
attempting to build the test files
Change-Id: Ibbbd1f6ea77912bfd297129e7c83b9a80923ea12
Marco [Tue, 9 Jun 2015 23:22:28 +0000 (23:22 +0000)]
Merge "Adjust some parameters for cyclic refresh for low bitrates."
Marco [Tue, 9 Jun 2015 21:58:32 +0000 (14:58 -0700)]
Adjust some parameters for cyclic refresh for low bitrates.
Reduce motion threshold and boost factor for second segment,
for low bitrates, at low resolutions for now.
This is to reduce the rate fluctuation/frame dropping that occurs
at these low bitrates.
Change-Id: Ia66c3be41831882fca8c1e4fe104f5ea8fbe7142
Debargha Mukherjee [Tue, 9 Jun 2015 17:03:21 +0000 (17:03 +0000)]
Merge "Prevent dividing by 0 when target-bitrate is 0."
Paul Wilkins [Wed, 3 Jun 2015 23:22:11 +0000 (00:22 +0100)]
Changes to active maxq calculation in two pass.
Some initial experiments into discounting dead zone
formating bars and intra skip blocks (common in some
types of animation and graphics) in the calculation of
the active max Q for each ARF/GF group.
TODO: check for vertical formating bars and validate the
horizontal bar at the bottom edge of the image.
As expected, this change as it stands, does not make much
difference for the natural videos in the std-hd and derf sets.
However, for the yt and yt hd set there is a significant rise
in the average PSNR with overall PSNR and SSIM remaining
neutral.
The mean rise for the YT-HD test set was > 6%. This is mainly
because the change allows Q to drop further on titles and
other graphics sections where spending a small number of
extra bits gives a sharp rise in PSNR.
Change-Id: I3f878ae91fc1854312d7ecf9fa792c17bc1aa6b7
Paul Wilkins [Fri, 29 May 2015 23:56:19 +0000 (00:56 +0100)]
Enable more split modes for animated content.
For content that is identified as likely to contain some
animation or graphics content, increase the availability
of split modes for good quality speeds 1-3.
On a problem test animation clip this improves metrics
results by about 0.25 db and makes a noticeable difference
visually. It also causes a small drop in file size (~0.5%) but
a rise in encode time of about 5-6% at speed 2.
For more normal content it should have no effect.
Change-Id: Ic4cd9a8de065af9f9402f4477a17442aebf0e439
Debargha Mukherjee [Mon, 8 Jun 2015 23:18:14 +0000 (16:18 -0700)]
Prevent dividing by 0 when target-bitrate is 0.
Change-Id: I05b7fb378b6b0c5f263e7839f96ba6830ee34fd2
Paul Wilkins [Mon, 8 Jun 2015 14:26:05 +0000 (14:26 +0000)]
Merge "Animation and dead zone detection."
James Zern [Sat, 6 Jun 2015 16:10:59 +0000 (16:10 +0000)]
Merge "vpxdec: cosmetics: break some long lines"
James Zern [Sat, 6 Jun 2015 16:10:18 +0000 (16:10 +0000)]
Merge "vpxenc: relocate vp8/vp9 only options"
James Zern [Sat, 6 Jun 2015 16:07:56 +0000 (16:07 +0000)]
Merge "disable vp8_sub_pixel_variance8x8_neon"
James Zern [Sat, 6 Jun 2015 03:24:34 +0000 (03:24 +0000)]
Merge "vs/armv7: use -oldit armasm flag"
James Zern [Sat, 6 Jun 2015 02:59:53 +0000 (19:59 -0700)]
disable vp8_sub_pixel_variance8x8_neon
fails unit tests:
[ FAILED ] NEON/VP8SubpelVarianceTest.ExtremeRef/0, where GetParam() = (3, 3, 0x14e36d, 0)
[ FAILED ] NEON/VP8SubpelVarianceTest.Ref/0, where GetParam() = (3, 3, 0x14e36d, 0)
the tests were recently enabled in:
eb88b17 Make vp9 subpixel match vp8
the functions likely haven't changed since being converted from assembly
Change-Id: I6141717b111b8f735f436c160d74270af53ef722
James Zern [Fri, 5 Jun 2015 23:18:49 +0000 (16:18 -0700)]
vpxdec: cosmetics: break some long lines
Change-Id: I95827a6f5e585d2accbb8fc09501f2d38db585e4
James Zern [Fri, 5 Jun 2015 23:07:20 +0000 (16:07 -0700)]
vpxenc: relocate vp8/vp9 only options
move them under their respective config check to avoid some unused
variable warnings when disabled
Change-Id: Ic5e5280cf1bc1f56e8349676f0bedae4acef34ea
hkuang [Wed, 6 May 2015 23:31:13 +0000 (16:31 -0700)]
Optimize the decode_partition. About 0.7% gain on N10.
Change-Id: Ia689c254bd2d4f274abcc451a9b758f62e3a2b1f
James Zern [Fri, 5 Jun 2015 22:21:10 +0000 (15:21 -0700)]
vs/armv7: use -oldit armasm flag
this quiets warnings from armv6 code [1].
from msdn [2]:
-oldit
Generate ARMv7-style IT blocks. By default, ARMv8-compatible IT blocks
are generated.
a new configuration would be needed for armv8 in any case as the neon
assembly is being built, so removing this should be harmless
[1] A4509: This form of conditional instruction is deprecated
[2] https://msdn.microsoft.com/en-us/library/hh873189.aspx
Change-Id: I4c3b838b52a87401c6daecd83d22ab148ed7c5d9
James Zern [Fri, 5 Jun 2015 21:49:13 +0000 (21:49 +0000)]
Merge "vp9_reconintra: simplify d63_predictor"
Scott LaVarnway [Fri, 5 Jun 2015 20:04:25 +0000 (20:04 +0000)]
Merge "BUG FIX: Remove counts param"
Scott LaVarnway [Fri, 5 Jun 2015 18:54:04 +0000 (11:54 -0700)]
BUG FIX: Remove counts param
member access within null pointer of type 'FRAME_COUNTS'
Change-Id: Id3bf75e0a6f2a1abf8522cf9fbb98b3a4443de38
Frank Galligan [Fri, 5 Jun 2015 18:02:08 +0000 (18:02 +0000)]
Merge "Add control to skip loop filter in VP9 decoder."
Frank Galligan [Fri, 5 Jun 2015 18:01:51 +0000 (18:01 +0000)]
Merge "vpxenc: Add support for pixel aspect ratio."
Frank Galligan [Thu, 21 May 2015 18:49:11 +0000 (11:49 -0700)]
Add control to skip loop filter in VP9 decoder.
This control allows the application to skip the loop filter in the
decoder. This is an advanced control that should only be used in
extreme circumstances as it may introduce and accumulate decode
artifacts.
Change-Id: I278c65c60826f84c9141ebe06c6eeed3c2335fa8
Frank Galligan [Mon, 1 Jun 2015 17:20:58 +0000 (10:20 -0700)]
vpxenc: Add support for pixel aspect ratio.
WebM files will adjust the display width and height according to the
input pixel aspect ratio. The default pixel aspect ratio is 1:1.
BUG=https://code.google.com/p/webm/issues/detail?id=1005
Change-Id: I23e0a601b7259fa9513cb86110c41b8437769808
Johann [Fri, 5 Jun 2015 16:54:32 +0000 (16:54 +0000)]
Merge "Duplicate reference variance code"
Marco [Fri, 5 Jun 2015 00:05:11 +0000 (17:05 -0700)]
Fix to spatial svc: set reference_frame masking.
For real-time mode: keep reference_frame masking off
for spatial svc.
Change-Id: I15e123c06f67ea040172b8d4042a672f3525b9d8
Parag Salasakar [Fri, 5 Jun 2015 05:32:17 +0000 (05:32 +0000)]
Merge "mips msa vp9 loopfilter 4, 8 optimization"
Parag Salasakar [Fri, 5 Jun 2015 02:22:40 +0000 (07:52 +0530)]
mips msa vp9 loopfilter 4, 8 optimization
average improvement ~3x-4x
Change-Id: I59279293ce4b2a1e99bd10579ac97740e943643f
Marco [Fri, 5 Jun 2015 04:26:05 +0000 (04:26 +0000)]
Merge "Bugfx in setting layer framerate."
James Zern [Thu, 4 Jun 2015 03:40:32 +0000 (20:40 -0700)]
vp9_reconintra: simplify d63_predictor
calculate the averages needed for even and odd rows once; this removes a
conditional from the inner loop
the final average calculated currently relies on above[] being extended,
it could be reduced to use
above[block_size - 2] + 3 * above[block_size - 1]
Change-Id: I70f5eac8d8a2a959c7114844a95826f445c3dd4d
Parag Salasakar [Fri, 5 Jun 2015 02:15:24 +0000 (02:15 +0000)]
Merge "mips msa vp9 loopfilter 16 optimization"
James Zern [Fri, 5 Jun 2015 02:15:22 +0000 (02:15 +0000)]
Merge "vp9_reconintra: use AVG[23] consistently"
James Zern [Fri, 5 Jun 2015 01:46:38 +0000 (01:46 +0000)]
Merge "vp9_reconintra_neon_asm/tm4x4: simplify left load"
James Zern [Thu, 4 Jun 2015 22:56:42 +0000 (22:56 +0000)]
Merge "vp9_reconintra: fix d45/d63 discrepancies"
Scott LaVarnway [Thu, 4 Jun 2015 22:20:53 +0000 (22:20 +0000)]
Merge "Remove cm parameter from vp9_decode_block_tokens() part 2"
James Zern [Thu, 4 Jun 2015 20:05:29 +0000 (13:05 -0700)]
vp9_reconintra: fix d45/d63 discrepancies
the final index in rows 2, 3 differ from vp8
Change-Id: I0fcea907b4ab44e266c0f1fd77b290d2236b280a
Marco [Thu, 4 Jun 2015 20:09:44 +0000 (13:09 -0700)]
Bugfx in setting layer framerate.
Index for ts_rate_decimator should be temporal layer (tl) index.
Change-Id: I0320b7f7ae987ef64fdfe7c45099e7978a8fef17
Yaowu Xu [Mon, 1 Jun 2015 16:13:59 +0000 (09:13 -0700)]
Make vp9 the default codec for vpxenc
Change-Id: Ic3b4f3c9a6d8f9b04efb8b5ee080880895063564
Scott LaVarnway [Tue, 2 Jun 2015 12:18:21 +0000 (05:18 -0700)]
Reducing size of MODE_INFO struct
Reduced size from 124 bytes to 104 bytes. For decode only builds,
it is reduced to 68 bytes.
Change-Id: If9e6b92285459425fa086ab5a743d0a598a69de3
Scott LaVarnway [Mon, 1 Jun 2015 15:18:27 +0000 (08:18 -0700)]
Remove cm parameter from vp9_decode_block_tokens() part 2
Change-Id: Iee24b6bb095f748333223e6036fc5c9d9e7e5f1c
Scott LaVarnway [Thu, 4 Jun 2015 13:46:41 +0000 (13:46 +0000)]
Merge "Remove counts param"
Parag Salasakar [Thu, 4 Jun 2015 06:20:41 +0000 (11:50 +0530)]
mips msa vp9 loopfilter 16 optimization
average improvement ~3x-4x
Change-Id: I8ef263da6ebcf8f20aabaefeccf25a84640ba048
Johann Koenig [Thu, 4 Jun 2015 06:16:12 +0000 (06:16 +0000)]
Merge "Make vp9 subpixel match vp8"
Parag Salasakar [Thu, 4 Jun 2015 05:44:23 +0000 (05:44 +0000)]
Merge "mips msa vp9 convolve8 avg hv optimization"
Johann [Tue, 26 May 2015 18:30:25 +0000 (11:30 -0700)]
Make vp9 subpixel match vp8
The only difference between the two was that the vp9 function allowed
for every step in the bilinear filter (16 steps) while vp8 only allowed
for half of those. Since all the call sites in vp9 (<< 1) the input, it
only ever used the same steps as vp8.
This will allow moving the subpel variance to vpx_dsp with the rest of
the variance functions.
Change-Id: I6fa2509350a2dc610c46b3e15bde98a15a084b75
hkuang [Thu, 4 Jun 2015 04:32:09 +0000 (04:32 +0000)]
Merge "Optimize the idct assembly code."
James Zern [Thu, 4 Jun 2015 02:34:37 +0000 (19:34 -0700)]
vp9_reconintra: use AVG[23] consistently
Change-Id: Iab7215f82be0c0c831cd81b6f8091afc3710dd54
Parag Salasakar [Thu, 4 Jun 2015 02:41:01 +0000 (08:11 +0530)]
mips msa vp9 convolve8 avg hv optimization
average improvement ~4x-6x
Change-Id: I7c8b4f2334491be8a859592606e568bc95d019aa
James Zern [Thu, 4 Jun 2015 01:59:09 +0000 (01:59 +0000)]
Merge "vp9_reconintra: simplify d45_predictor"
James Zern [Thu, 4 Jun 2015 01:58:26 +0000 (01:58 +0000)]
Merge changes from topic 'vp9-intra-pred'
* changes:
vp9_reconintra: specialize d135 4x4
vp9_reconintra: specialize d117 4x4
vp9_reconintra: specialize d207 4x4
vp9_reconintra: specialize d153 4x4
vp9_reconintra: specialize d63 4x4
vp9_reconintra: specialize d45 4x4
Marco [Thu, 4 Jun 2015 01:53:43 +0000 (01:53 +0000)]
Merge "Remove ABI check for 1 pass CBR SVC."
James Zern [Thu, 4 Jun 2015 01:51:13 +0000 (18:51 -0700)]
vp9_reconintra_neon_asm/tm4x4: simplify left load
use vld1.8 {d0[]}, [r0] rather than ldrb+vdup; mildly faster
Change-Id: Ia5ffc736bcb0f5497b7d9e55a93bf5a5f5f6928c
Parag Salasakar [Thu, 4 Jun 2015 01:16:18 +0000 (01:16 +0000)]
Merge "mips msa vp9 convolve8 avg horiz optimization"
Marco [Tue, 2 Jun 2015 17:23:03 +0000 (10:23 -0700)]
Remove ABI check for 1 pass CBR SVC.
Remove the ABI check for the controls needed for SVC 1 pass CBR mode.
Bump up the ABI version.
Change-Id: I35b79ee010e14af83c6d1e801d574deaaa2fc7eb
hkuang [Tue, 2 Jun 2015 00:10:33 +0000 (17:10 -0700)]
Optimize the idct assembly code.
Change-Id: Ia0ff859ff1c813dbe100e2f27b1ef78167483f4e
Paul Wilkins [Wed, 27 May 2015 00:37:18 +0000 (01:37 +0100)]
Animation and dead zone detection.
Adds code to detect dead zone bars at the top and bottom
of reformatted letterbox video (note that the code only
looks at the top of the image and assumes any dead zone
is symmetrical). Use of this to adapt rate control etc.
will follow in a subsequent patch.
Also counts other blocks (excluding the dead zone) that
have no intra signal. The presence of a significant
number of such blocks can be used as a identify that the frame
may be artificial (e.g. animation, screen capture, graphics).
This patch contains plumbing only and does not use
the signal.
Change-Id: I59bc93529cd4065416cef773e405fda3ae006a20
Marco [Wed, 3 Jun 2015 20:52:44 +0000 (13:52 -0700)]
Fix to sample encoder: vpx_temporal_svc_encoder.c
vp8 uses ts_target_bitrate for layer settings.
Change-Id: Ie72477b549051396feebff87a3744fed04366bf4
Johann [Wed, 3 Jun 2015 20:23:27 +0000 (13:23 -0700)]
Duplicate reference variance code
Some places are using the unoptimized variance function. This was never
intended and does not fit into the optimization framework.
Change-Id: Id96238407aad03b0ffd4a46cd183555a026daedc
Johann [Wed, 3 Jun 2015 15:00:51 +0000 (08:00 -0700)]
Remove unused sub pixel mse
Change-Id: I7a5e4e2632c3fa69d2a85a68fa9b418631caf09c
Parag Salasakar [Wed, 3 Jun 2015 06:03:42 +0000 (11:33 +0530)]
mips msa vp9 convolve8 avg horiz optimization
average improvement ~5x-8x
Change-Id: I179a69ec620fbd69979bd128f05d18113618aab4
Parag Salasakar [Wed, 3 Jun 2015 05:58:42 +0000 (05:58 +0000)]
Merge "mips msa vp9 convolve8 avg vert optimization"
James Zern [Wed, 3 Jun 2015 05:49:42 +0000 (05:49 +0000)]
Merge "test-data.sha1: mark test data files as binary"
James Zern [Wed, 3 Jun 2015 05:47:43 +0000 (05:47 +0000)]
Merge "Support building shared libraries on OS/2"
KO Myung-Hun [Mon, 1 Jun 2015 02:35:47 +0000 (11:35 +0900)]
test-data.sha1: mark test data files as binary
Change-Id: Ie3605bf4c4fb16eb21186adbb4577c20a8027344
KO Myung-Hun [Fri, 8 Aug 2014 04:13:02 +0000 (13:13 +0900)]
Support building shared libraries on OS/2
Change-Id: I5750db0504cb69ead52f9f44bf583e693bffbb7e
Parag Salasakar [Wed, 3 Jun 2015 04:25:25 +0000 (09:55 +0530)]
mips msa vp9 convolve8 avg vert optimization
average improvement ~4x-6x
Change-Id: Ia2e6f770da46416ebec31fdcea5cc7878879a9d9
Parag Salasakar [Wed, 3 Jun 2015 04:10:14 +0000 (04:10 +0000)]
Merge "mips msa vp9 idct4x4 and iwht4x4 optimization"
Johann [Wed, 3 Jun 2015 02:03:44 +0000 (02:03 +0000)]
Merge "Unify reference variance functions"
Johann [Mon, 1 Jun 2015 20:03:30 +0000 (13:03 -0700)]
Unify reference variance functions
Use uint32_t for all output and make all functions static
Change-Id: I2c9c6f6310732dc53444607d1c1a268ac1ab83ba
Johann [Tue, 2 Jun 2015 21:44:13 +0000 (21:44 +0000)]
Merge "Disable neon bilinear 4x4"
Scott LaVarnway [Tue, 2 Jun 2015 16:06:00 +0000 (09:06 -0700)]
Remove counts param
Moved to MACROBLOCKD.
Change-Id: Icce765b334f2755f4fe2a4c39fb2ae2d7660d004
Marco [Thu, 21 May 2015 23:15:37 +0000 (16:15 -0700)]
Vidyo patch: Rate control for SVC, 1 pass CBR mode.
-Make Rate control work for SVC 1 pass CBR mode.
-Added temporal layering mode.
-Fixed bug in non-rd variance partition.
-Modified/updated the sample encoders (vp9_spatial_svc_encoder, vpx_temporal_svc_encoder).
-Added datarate unittest(s) for 1 pass CBR SVC.
Change-Id: Ie94b1b68a56ea1267b5087c625e5df04def2ee48
Parag Salasakar [Tue, 2 Jun 2015 06:46:28 +0000 (12:16 +0530)]
mips msa vp9 idct4x4 and iwht4x4 optimization
average improvement ~3x-4x
moved assert to respective files
Change-Id: I6c915059d456a00bdd76fab0dd2eede8b6c6ea58
Parag Salasakar [Tue, 2 Jun 2015 04:59:56 +0000 (10:29 +0530)]
mips msa vp9 updated convolve horiz, vert, hv, copy, avg module
Updated sources according to improved version of common MSA macros.
Enabled respective convolve MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: If5ad6ef8ea7ca47feed6d2fc9f34f0f0e8b6694d
Parag Salasakar [Tue, 2 Jun 2015 04:48:01 +0000 (04:48 +0000)]
Merge "mips msa vp9 updated idct 8x8, 16x16 and 32x32 module"
Johann [Mon, 1 Jun 2015 23:24:49 +0000 (16:24 -0700)]
Disable neon bilinear 4x4
Clang adds alignment hints when casting up the loads/stores. Although
this should be safe for most paths, it's causing some crashes. Either
the source of the misalignment needs to be determined and adjusted or
the intrinsics need to be rewritten to avoid using the cast to load the
data.
BUG=817,892
Change-Id: Ia3aa824d6a4cd97e14325ff49dc730b6f85ec7e8
Johann Koenig [Mon, 1 Jun 2015 22:36:09 +0000 (22:36 +0000)]
Merge "Adds subsecond frame rates to webm"
James Zern [Mon, 1 Jun 2015 20:03:46 +0000 (20:03 +0000)]
Merge changes from topic 'vp9-intra-pred'
* changes:
vp9_reconintra_neon/tm: improve above_left load
vp9_reconintra_neon: cosmetics: normalize fn params
James Zern [Mon, 1 Jun 2015 20:01:37 +0000 (20:01 +0000)]
Merge "vp9_reconintra_neon_asm/tm: simplify above_left load"
Johann [Mon, 1 Jun 2015 18:56:49 +0000 (18:56 +0000)]
Merge "Cast variance reference output"
paulwilkins [Mon, 1 Jun 2015 18:15:09 +0000 (18:15 +0000)]
Merge "Fast feedback of bits on undershoot."
Johann [Mon, 1 Jun 2015 17:53:46 +0000 (10:53 -0700)]
Cast variance reference output
The larger internal variables are required for the intermediates
but RoundHighBitDepth brings them down to uint32_t/unsigned int.
Fixes type warnings in visual studio.
Change-Id: I48d35284d6cbde330ccdc1f46b6215a645d5eb00
Johnny Klonaris [Mon, 1 Jun 2015 06:29:16 +0000 (23:29 -0700)]
Adds subsecond frame rates to webm
Numerator was being range checked against the
denominator - preventing any frame rate slower
than 1 fps.
I've tested this on a Mac using using ffmpeg and
results are comparable to mp4 and ogg files generated
at the same time.
Not yet tested on Windows.
Johnny Klonaris
google@jawknee.com
Change-Id: Idb358dbc2e7dc000037880ede4a1b0df248a42c8
Parag Salasakar [Mon, 1 Jun 2015 03:49:01 +0000 (09:19 +0530)]
mips msa vp9 updated idct 8x8, 16x16 and 32x32 module
Updated sources according to improved version of common MSA macros.
Enabled idct MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: I1f488ab2c741f6c622b7a855388a202168082209
James Zern [Sat, 30 May 2015 17:21:15 +0000 (10:21 -0700)]
vp9_reconintra: simplify d45_predictor
only the immediate above right pixel is needed; this removes a
conditional from the inner loop
the final average calculated currently relies on above[] being extended,
it could be reduced to use above[block_size - 2] + 3 * above_right
Change-Id: Ica4f2b8d25eec3ca1d6fa52ef0d4adc228eeea3f
James Zern [Sat, 30 May 2015 03:05:57 +0000 (20:05 -0700)]
vp9_reconintra: specialize d135 4x4
based on webp's RD4()
Change-Id: I64c8f0a1325a8f201eaad39b396fae7a2d06efff
James Zern [Sat, 30 May 2015 03:08:35 +0000 (20:08 -0700)]
vp9_reconintra: specialize d117 4x4
based on webp's VR4()
Change-Id: Ic8c0b8ed65a63772ca0a4321592880a5e8947db5
James Zern [Sat, 30 May 2015 03:11:15 +0000 (20:11 -0700)]
vp9_reconintra: specialize d207 4x4
based on webp's HU4()
Change-Id: I2401ef307cd94e70cc7904f55954af04290c8af9
James Zern [Sat, 30 May 2015 03:12:46 +0000 (20:12 -0700)]
vp9_reconintra: specialize d153 4x4
based on webp's HD4()
Change-Id: Icba1e21ec4b8f5026dc92e49741a68b059c8b9b1
James Zern [Sat, 30 May 2015 03:09:51 +0000 (20:09 -0700)]
vp9_reconintra: specialize d63 4x4
based on webp's VL4()
Change-Id: Ibab962053843eae8752b4e74b6481a53bb034ae9
James Zern [Sat, 30 May 2015 03:01:21 +0000 (20:01 -0700)]
vp9_reconintra: specialize d45 4x4
based on webp's LD4()
Change-Id: I74855d23ce73e1c6988fe08bf7c959b7a69b4abf
Parag Salasakar [Sat, 30 May 2015 02:52:25 +0000 (02:52 +0000)]
Merge "mips msa vp9 updated macros and disable all MSA functions"
James Zern [Sat, 30 May 2015 02:10:27 +0000 (19:10 -0700)]
vp9_reconintra_neon/tm: improve above_left load
use vld1?_dup_u8 over vdup?_n_u8, reduces general register use; mildly
faster
Change-Id: Ie0e4e550849a207b34b378541196b553c9f12011
James Zern [Sat, 30 May 2015 02:01:39 +0000 (19:01 -0700)]
vp9_reconintra_neon: cosmetics: normalize fn params
s/y_stride/stride/
Change-Id: Ie98c3fe241dc240b653849eda356a8862bdd52f4