review.tizen.org Git - platform/kernel/linux-starfive.git/log

mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()

The clk_disable_unprepare() should be called in the error handling
of devm_clk_bulk_get_optional, fix it by replacing devm_clk_get_optional
and clk_prepare_enable by devm_clk_get_optional_enabled.

Fixes: f5eccd94b63f ("mmc: mediatek: Add subsys clock control for MT8192 msdc")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221125090141.3626747-1-cuigaosheng1@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mmc_test: Fix removal of debugfs file

In __mmc_test_register_dbgfs_file(), we need to assign 'file', as it's
being used when removing the debugfs files when the mmc_test module is
removed.

Fixes: a04c50aaa916 ("mmc: core: no need to check return value of debugfs_create functions")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
[Ulf: Re-wrote the commit msg]
Link: https://lore.kernel.org/r/20221123095506.1965691-1-yebin@huaweicloud.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check

With the current logic the "failed to exit halt state" error would be
shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL
register, since the right hand side is always true. Fix this by using
the correct operator (bit-wise instead of logical AND) to only check for
the halt bit flag, which was obviously intended here.

Fixes: 85236d2be844 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE")
Signed-off-by: Sebastian Falbesoner <sebastian.falbesoner@gmail.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: Fix ambiguous TRIM and DISCARD arg

Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD
introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely
included DISCARD too.

Fixes: b3bf915308ca ("mmc: core: new discard feature support at eMMC v4.5")
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before amd_probe() returns. There is no problem for the 'smbus_dev ==
NULL' branch because pci_dev_put() can also handle the NULL input
parameter case.

Fixes: 659c9bc114a8 ("mmc: sdhci-pci: Build o2micro support in the same module")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout

The SD card is recognized failed sometimes when resume from suspend.
Because CD# debounce time too long then card present report wrong.
Finally, card is recognized failed.

Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221104095512.4068-1-chevron.li@bayhubtech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: properly select voltage range without power cycle

In mmc_select_voltage(), if there is no full power cycle, the voltage
range selected at the end of the function will be on a single range
(e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V),
the mask shift should be reduced by 1.

This issue was triggered by using a specific SD-card (Verbatim Premium
16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes
and there is no power cycle. And the card was failing to switch to
high-speed mode. When adding the range 3.2V/3.3V for this card with the
proposed shift change, the card can switch to high-speed mode.

Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Linux 6.1-rc5

Merge tag 'mips-fixes_6.1_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

- fix jump label branch range check

- check kmalloc failures in Loongson64 kexec

- fix builds with clang-14

- fix char/int handling in pic32

* tag 'mips-fixes_6.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: pic32: treat port as signed integer
  MIPS: jump_label: Fix compat branch range check
  mips: alchemy: gpio: Include the right header
  MIPS: Loongson64: Add WARN_ON on kexec related kmalloc failed
  MIPS: fix duplicate definitions for exported symbols
  mips: boot/compressed: use __NO_FORTIFY

Merge tag 'efi-fixes-for-v6.1-3' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
   machines, which crash in SetTime() if no virtual remapping is used

   This is the first time we've added an SMBIOS based quirk on arm64,
   but fortunately, we can just call a EFI protocol to grab the type #1
   SMBIOS record when running in the stub, so we don't need all the
   machinery we have in the kernel proper to parse SMBIOS data.

- Drop a spurious warning on misaligned runtime regions when using 16k
   or 64k pages on arm64

* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  arm64: efi: Fix handling of misaligned runtime regions and drop warning
  arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers.

  The sas one is in an unlikely error leg, the debug one is to make it
  more standards conformant and the ibmvfc one is to fix a user visible
  bug where a failover could lose all paths to the device"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
  scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
  scsi: ibmvfc: Avoid path failures during live migration

Merge tag 'sound-fix-6.1-rc5' of git://git./linux/kernel/git/tiwai/sound

Pull additional sound fix from Takashi Iwai:
"A regression fix for the latest memalloc helper change"

* tag 'sound-fix-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: memalloc: Try dma_alloc_noncontiguous() at first

ALSA: memalloc: Try dma_alloc_noncontiguous() at first

The latest fix for the non-contiguous memalloc helper changed the
allocation method for a non-IOMMU system to use only the fallback
allocator. This should have worked, but it caused a problem sometimes
when too many non-contiguous pages are allocated that can't be treated
by HD-audio controller.

As a quirk workaround, go back to the original strategy: use
dma_alloc_noncontiguous() at first, and apply the fallback only when
it fails, but only for non-IOMMU case.

We'll need a better fix in the fallback code as well, but this
workaround should paper over most cases.

Fixes: 9736a325137b ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wgSH5ubdvt76gNwa004ooZAEJL_1Q-Fyw5M2FDdqL==dg@mail.gmail.com
Link: https://lore.kernel.org/r/20221112084718.3305-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'ata-6.1-rc5' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:
"Several libata generic code fixes for rc5:

   - Add missing translation of the SYNCHRONIZE CACHE 16 scsi command as
     this command is mandatory for host-managed ZBC drives.

     The lack of support for it in libata-scsi was causing issues with
     some passthrough applications using ZBC drives (from Shin'ichiro).

   - Fix the error path of libata-transport host, port, link and device
     attributes initialization (from Yingliang).

   - Prevent issuing new commands to a drive that is in the NCQ error
     state and undergoing recovery (From Niklas).

     This bug went unnoticed for a long time as commands issued to a
     drive in error state are aborted immediately and retried by the
     scsi layer, hiding the useless abort-and-retry sequence"

* tag 'ata-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-core: do not issue non-internal commands once EH is pending
  ata: libata-transport: fix error handling in ata_tdev_add()
  ata: libata-transport: fix error handling in ata_tlink_add()
  ata: libata-transport: fix error handling in ata_tport_add()
  ata: libata-transport: fix double ata_host_put() in ata_tport_add()
  ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure

Merge tag 'mm-hotfixes-stable-2022-11-11' of git://git./linux/kernel/git/akpm/mm

Pull misc hotfixes from Andrew Morton:
"22 hotfixes.

  Eight are cc:stable and the remainder address issues which were
  introduced post-6.0 or which aren't considered serious enough to
  justify a -stable backport"

* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
  docs: kmsan: fix formatting of "Example report"
  mm/damon/dbgfs: check if rm_contexts input is for a real context
  maple_tree: don't set a new maximum on the node when not reusing nodes
  maple_tree: fix depth tracking in maple_state
  arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
  fs: fix leaked psi pressure state
  nilfs2: fix use-after-free bug of ns_writer on remount
  x86/traps: avoid KMSAN bugs originating from handle_bug()
  kmsan: make sure PREEMPT_RT is off
  Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
  x86/uaccess: instrument copy_from_user_nmi()
  kmsan: core: kmsan_in_runtime() should return true in NMI context
  mm: hugetlb_vmemmap: include missing linux/moduleparam.h
  mm/shmem: use page_mapping() to detect page cache for uffd continue
  mm/memremap.c: map FS_DAX device memory as decrypted
  Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
  nilfs2: fix deadlock in nilfs_count_free_blocks()
  mm/mmap: fix memory leak in mmap_region()
  hugetlbfs: don't delete error page from pagecache
  maple_tree: reorganize testing to restore module testing
  ...

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Another fix for rodata=full. Since rodata= is not a simple boolean on
   arm64 (accepting 'full' as well), it got inadvertently broken by
   changes in the core code. If rodata=on is the default and rodata=off
   is passed on the kernel command line, rodata_full is never disabled

- Fix gcc compiler warning of shifting 0xc0 into bits 31:24 without an
   explicit conversion to u32 (triggered by the AMPERE1 MIDR definition)

- Include asm/ptrace.h in asm/syscall_wrapper.h to fix an incomplete
   struct pt_regs type causing the BPF verifier to refuse to load a
   tracing program which accesses pt_regs

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Include asm/ptrace.h in syscall_wrapper header.
  arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro
  arm64: fix rodata=full again

ata: libata-core: do not issue non-internal commands once EH is pending

While the ATA specification states that a device should return command
aborted for all commands queued after the device has entered error state,
since ATA only keeps the sense data for the latest command (in non-NCQ
case), we really don't want to send block layer commands to the device
after it has entered error state. (Only ATA EH commands should be sent,
to read the sense data etc.)

Currently, scsi_queue_rq() will check if scsi_host_in_recovery()
(state is SHOST_RECOVERY), and if so, it will _not_ issue a command via:
scsi_dispatch_cmd() -> host->hostt->queuecommand() (ata_scsi_queuecmd())
-> __ata_scsi_queuecmd() -> ata_scsi_translate() -> ata_qc_issue()

Before commit e494f6a72839 ("[SCSI] improved eh timeout handler"),
when receiving a TFES error IRQ, the call chain looked like this:
ahci_error_intr() -> ata_port_abort() -> ata_do_link_abort() ->
ata_qc_complete() -> ata_qc_schedule_eh() -> blk_abort_request() ->
blk_rq_timed_out() -> q->rq_timed_out_fn() (scsi_times_out()) ->
scsi_eh_scmd_add() -> scsi_host_set_state(shost, SHOST_RECOVERY)

Which meant that as soon as an error IRQ was serviced, SHOST_RECOVERY
would be set.

However, after commit e494f6a72839 ("[SCSI] improved eh timeout handler"),
scsi_times_out() will instead call scsi_abort_command() which will queue
delayed work, and the worker function scmd_eh_abort_handler() will call
scsi_eh_scmd_add(), which calls scsi_host_set_state(shost, SHOST_RECOVERY).

So now, after the TFES error IRQ has been serviced, we need to wait for
the SCSI workqueue to run its work before SHOST_RECOVERY gets set.

It is worth noting that, even before commit e494f6a72839 ("[SCSI] improved
eh timeout handler"), we could receive an error IRQ from the time when
scsi_queue_rq() checks scsi_host_in_recovery(), to the time when
ata_scsi_queuecmd() is actually called.

In order to handle both the delayed setting of SHOST_RECOVERY and the
window where we can receive an error IRQ, add a check against
ATA_PFLAG_EH_PENDING (which gets set when servicing the error IRQ),
inside ata_scsi_queuecmd() itself, while holding the ap->lock.
(Since the ap->lock is held while servicing IRQs.)

Fixes: e494f6a72839 ("[SCSI] improved eh timeout handler")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Merge tag 'block-6.1-2022-11-11' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- NVMe pull request via Christoph:
        - Quiet user passthrough command errors (Keith Busch)
        - Fix memory leak in nvmet_subsys_attr_model_store_locked
        - Fix a memory leak in nvmet-auth (Sagi Grimberg)

- Fix a potential NULL point deref in bfq (Yu)

- Allocate command/response buffers separately for DMA for sed-opal,
   rather than rely on embedded alignment (Serge)

* tag 'block-6.1-2022-11-11' of git://git.kernel.dk/linux:
  nvmet: fix a memory leak
  nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked
  nvme: quiet user passthrough command errors
  block: sed-opal: kmalloc the cmd/resp buffers
  block, bfq: fix null pointer dereference in bfq_bio_bfqg()

Merge tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
"Nothing major, just a few minor tweaks:

   - Tweak for the TCP zero-copy io_uring self test (Pavel)

   - Rather than use our internal cached value of number of CQ events
     available, use what the user can see (Dylan)

   - Fix a typo in a comment, added in this release (me)

   - Don't allow wrapping while adding provided buffers (me)

   - Fix a double poll race, and add a lockdep assertion for it too
     (Pavel)"

* tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux:
  io_uring/poll: lockdep annote io_poll_req_insert_locked
  io_uring/poll: fix double poll req->flags races
  io_uring: check for rollover of buffer ID when providing buffers
  io_uring: calculate CQEs from the user visible value
  io_uring: fix typo in io_uring.h comment
  selftests/net: don't tests batched TCP io_uring zc

Merge tag 's390-6.1-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Alexander Gordeev:

- fix memcpy warning about field-spanning write in zcrypt driver

- minor updates to defconfigs

- remove CONFIG_DEBUG_INFO_BTF from all defconfigs and add btf.config
   addon config file. It significantly decreases compile time and allows
   quickly enabling that option into the current kernel config

- add kasan.config addon config file which allows to easily enable
   KASAN into the current kernel config

- binutils commit 906f69cf65da ("IBM zSystems: Issue error for *DBL
   relocs on misaligned symbols") caused several link errors. Always
   build relocatable kernel to avoid this problem

- raise the minimum clang version to 15.0.0 to avoid silent generation
   of a corrupted code

* tag 's390-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390
  s390: always build relocatable kernel
  s390/configs: add kasan.config addon config file
  s390/configs: move CONFIG_DEBUG_INFO_BTF into btf.config addon config
  s390: update defconfigs
  s390/zcrypt: fix warning about field-spanning write

Merge tag 'hardening-v6.1-rc5' of git://git./linux/kernel/git/kees/linux

Pull kernel hardening fix from Kees Cook:

- Fix !SMP placement of '.data..decrypted' section (Nathan Chancellor)

* tag 'hardening-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
vmlinux.lds.h: Fix placement of '.data..decrypted' section

Merge tag 'nfsd-6.1-4' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:

- Fix an export leak

- Fix a potential tracepoint crash

* tag 'nfsd-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: put the export reference in nfsd4_verify_deleg_dentry
nfsd: fix use-after-free in nfsd_file_do_acquire tracepoint

Merge tag 'fixes_for_v6.1-rc5' of git://git./linux/kernel/git/jack/linux-fs

Pull UDF fix from Jan Kara:
"Fix a possible memory corruption with UDF"

* tag 'fixes_for_v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix a slab-out-of-bounds write bug in udf_find_entry()

Merge tag 'perf-tools-fixes-for-v6.1-2-2022-11-10' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix 'perf stat' crash with --per-node --metric-only in CSV mode, due
   to the AGGR_NODE slot in the 'aggr_header_csv' array not being set.

- Fix printing prefix in CSV output of 'perf stat' metrics in interval
   mode (-I), where an extra separator was being added to the start of
   some lines.

- Fix skipping branch stack sampling 'perf test' entry, that was using
   both --branch-any and --branch-filter, which can't be used together.

* tag 'perf-tools-fixes-for-v6.1-2-2022-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Add the include/perf/ directory to .gitignore
  perf test: Fix skipping branch stack sampling test
  perf stat: Fix printing os->prefix in CSV metrics output
  perf stat: Fix crash with --per-node --metric-only in CSV mode

Merge tag 'riscv-for-linus-6.1-rc5' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A fix to add the missing PWM LEDs into the SiFive HiFive Unleashed
   device tree.

- A fix to fully clear a task's registers on creation, as they end up
   in userspace and thus leak kernel memory.

- A pair of VDSO-related build fixes that manifest on recent LLVM-based
   toolchains.

- A fix to our early init to ensure the DT is adequately processed
   before reserved memory nodes are processed.

* tag 'riscv-for-linus-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: vdso: Do not add missing symbols to version section in linker script
  riscv: fix reserved memory setup
  riscv: vdso: fix build with llvm
  riscv: process: fix kernel info leakage
  riscv: dts: sifive unleashed: Add PWM controlled LEDs

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm
"This is a pretty large diffstat for this time of the release. The main
  culprit is a reorganization of the AMD assembly trampoline, allowing
  percpu variables to be accessed early.

  This is needed for the return stack depth tracking retbleed mitigation
  that will be in 6.2, but it also makes it possible to tighten the IBRS
  restore on vmexit. The latter change is a long tail of the
  spectrev2/retbleed patches (the corresponding Intel change was simpler
  and went in already last June), which is why I am including it right
  now instead of sharing a topic branch with tip.

  Being assembly and being rich in comments makes the line count balloon
  a bit, but I am pretty confident in the change (famous last words)
  because the reorganization actually makes everything simpler and more
  understandable than before. It has also had external review and has
  been tested on the aforementioned 6.2 changes, which explode quite
  brutally without the fix.

  Apart from this, things are pretty normal.

  s390:

   - PCI fix

   - PV clock fix

  x86:

   - Fix clash between PMU MSRs and other MSRs

   - Prepare SVM assembly trampoline for 6.2 retbleed mitigation and
     for...

   - ... tightening IBRS restore on vmexit, moving it before the first
     RET or indirect branch

   - Fix log level for VMSA dump

   - Block all page faults during kvm_zap_gfn_range()

  Tools:

   - kvm_stat: fix incorrect detection of debugfs

   - kvm_stat: update vmexit definitions"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: Block all page faults during kvm_zap_gfn_range()
  KVM: x86/pmu: Limit the maximum number of supported AMD GP counters
  KVM: x86/pmu: Limit the maximum number of supported Intel GP counters
  KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet
  KVM: SVM: Only dump VMSA to klog at KERN_DEBUG level
  tools/kvm_stat: update exit reasons for vmx/svm/aarch64/userspace
  tools/kvm_stat: fix incorrect detection of debugfs
  x86, KVM: remove unnecessary argument to x86_virt_spec_ctrl and callers
  KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assembly
  KVM: SVM: restore host save area from assembly
  KVM: SVM: move guest vmsave/vmload back to assembly
  KVM: SVM: do not allocate struct svm_cpu_data dynamically
  KVM: SVM: remove dead field from struct svm_cpu_data
  KVM: SVM: remove unused field from struct vcpu_svm
  KVM: SVM: retrieve VMCB from assembly
  KVM: SVM: adjust register allocation for __svm_vcpu_run()
  KVM: SVM: replace regs argument of __svm_vcpu_run() with vcpu_svm
  KVM: x86: use a separate asm-offsets.c file
  KVM: s390: pci: Fix allocation size of aift kzdev elements
  KVM: s390: pv: don't allow userspace to set the clock under PV

Merge tag 'hyperv-fixes-signed-20221110' of git://git./linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

- Fix TSC MSR write for root partition (Anirudh Rayabharam)

- Fix definition of vector in pci-hyperv driver (Dexuan Cui)

- A few other misc patches

* tag 'hyperv-fixes-signed-20221110' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  PCI: hv: Fix the definition of vector in hv_compose_msi_msg()
  MAINTAINERS: remove sthemmin
  x86/hyperv: fix invalid writes to MSRs during root partition kexec
  clocksource/drivers/hyperv: add data structure for reference TSC MSR
  Drivers: hv: fix repeated words in comments
  x86/hyperv: Remove BUG_ON() for kmap_local_page()

Merge tag 'dmaengine-fix-6.1' of git://git./linux/kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:
"Misc minor driver fixes and a big pile of at_hdmac driver fixes. More
  work on this driver is done and sitting in next:

   - Pile of at_hdmac driver rework which fixes many long standing
     issues for this driver.

   - couple of stm32 driver fixes for clearing structure and race fix

   - idxd fixes for RO device state and batch size

   - ti driver mem leak fix

   - apple fix for grabbing channels in xlate

   - resource leak fix in mv xor"

* tag 'dmaengine-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
  dmaengine: at_hdmac: Check return code of dma_async_device_register
  dmaengine: at_hdmac: Fix impossible condition
  dmaengine: at_hdmac: Don't allow CPU to reorder channel enable
  dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errors
  dmaengine: at_hdmac: Fix descriptor handling when issuing it to hardware
  dmaengine: at_hdmac: Fix concurrency over the active list
  dmaengine: at_hdmac: Free the memset buf without holding the chan lock
  dmaengine: at_hdmac: Fix concurrency over descriptor
  dmaengine: at_hdmac: Fix concurrency problems by removing atc_complete_all()
  dmaengine: at_hdmac: Protect atchan->status with the channel lock
  dmaengine: at_hdmac: Do not call the complete callback on device_terminate_all
  dmaengine: at_hdmac: Fix premature completion of desc in issue_pending
  dmaengine: at_hdmac: Start transfer for cyclic channels in issue_pending
  dmaengine: at_hdmac: Don't start transactions at tx_submit level
  dmaengine: at_hdmac: Fix at_lli struct definition
  dmaengine: stm32-dma: fix potential race between pause and resume
  dmaengine: ti: k3-udma-glue: fix memory leak when register device fail
  dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()
  dmaengine: apple-admac: Fix grabbing of channels in of_xlate
  dmaengine: idxd: fix RO device state error after been disabled/reset
  ...

Merge tag 'spi-fix-v6.1-rc4' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A relatively large batch of fixes here but all device specific, plus
  an update to MAINTAINERS.

  The summary print change to the STM32 driver is fixing an issue where
  the driver could easily end up spamming the logs with something that
  should be a debug message"

* tag 'spi-fix-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: amd: Fix SPI_SPD7 value
  spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run
  spi: meson-spicc: fix do_div build error on non-arm64
  spi: intel: Use correct mask for flash and protected regions
  spi: mediatek: Fix package division error
  spi: tegra210-quad: Don't initialise DMA if not supported
  MAINTAINERS: Update HiSilicon SFC Driver maintainer
  spi: meson-spicc: move wait completion in driver to take bursts delay in account
  spi: stm32: Print summary 'callbacks suppressed' message

Merge tag 'mmc-v6.1-rc4' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:

- Provide helper for resetting both SDHCI and CQHCI

- Fix reset for CQHCI (am654, brcmstb, esdhc-imx, of-arasan, tegra)

- Fixup support for MMC_CAP_8_BIT_DATA (esdhc-imx)

* tag 'mmc-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATA
  mmc: sdhci_am654: Fix SDHCI_RESET_ALL for CQHCI
  mmc: sdhci-tegra: Fix SDHCI_RESET_ALL for CQHCI
  mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCI
  mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI
  mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI
  mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI

Merge tag 'for-linus-2022111101' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

- fix for memory leak (on error path) in Hyper-V driver (Yang
   Yingliang)

- regression fix for handling 3rd barrel switch emulation in Wacom
   driver (Jason Gerecke)

* tag 'for-linus-2022111101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: Fix logic used for 3rd barrel switch emulation
  HID: hyperv: fix possible memory leak in mousevsc_probe()
  HID: asus: Remove unused variable in asus_report_tool_width()

io_uring/poll: lockdep annote io_poll_req_insert_locked

Add a lockdep annotation in io_poll_req_insert_locked().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8115d8e702733754d0aea119e9b5bb63d1eb8b24.1668184658.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring/poll: fix double poll req->flags races

io_poll_double_prepare()            | io_poll_wake()
                                    | poll->head = NULL
smp_load(&poll->head); /* NULL */   |
flags = req->flags;                 |
                                    | req->flags &= ~SINGLE_POLL;
req->flags = flags | DOUBLE_POLL    |

The idea behind io_poll_double_prepare() is to serialise with the
first poll entry by taking the wq lock. However, it's not safe to assume
that io_poll_wake() is not running when we can't grab the lock and so we
may race modifying req->flags.

Skip double poll setup if that happens. It's ok because the first poll
entry will only be removed when it's definitely completing, e.g.
pollfree or oneshot with a valid mask.

Fixes: 49f1c68e048f1 ("io_uring: optimise submission side poll_refs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b7fab2d502f6121a7d7b199fe4d914a43ca9cdfd.1668184658.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'sound-6.1-rc5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Things look calming down, as this contains only a few small fixes:

   - Fix for a corner-case bug with SG-buffer page allocation helper

   - A regression fix for Roland USB-audio device probe

   - A potential memory leak fix at the error path

   - Handful quirks and device-specific fixes for HD- and USB-audio"

* tag 'sound-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: fix potential memleak in 'add_widget_node'
  ALSA: memalloc: Don't fall back for SG-buffer with IOMMU
  ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue
  ALSA: hda/realtek: Add Positivo C6300 model quirk
  ALSA: usb-audio: Add DSD support for Accuphase DAC-60
  ALSA: usb-audio: Add quirk entry for M-Audio Micro
  ALSA: hda/hdmi - enable runtime pm for more AMD display audio
  ALSA: usb-audio: Remove redundant workaround for Roland quirk
  ALSA: usb-audio: Yet more regression for for the delayed card registration
  ALSA: hda/ca0132: add quirk for EVGA Z390 DARK
  ALSA: hda: clarify comments on SCF changes
  ALSA: arm: pxa: pxa2xx-ac97-lib: fix return value check of platform_get_irq()
  ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41

Merge tag 'drm-fixes-2022-11-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Weekly pull request for graphics, mostly amdgpu and i915, with a
  couple of fixes for vc4 and panfrost, panel quirks and a kconfig
  change for rcar-du. Nothing seems to be too strange at this stage.

  amdgpu:
   - Fix s/r in amdgpu_vram_mgr_new
   - SMU 13.0.4 update
   - GPUVM TLB race fix
   - DCN 3.1.4 fixes
   - DCN 3.2.x fixes
   - Vega10 fan fix
   - BACO fix for Beige Goby board
   - PSR fix
   - GPU VM PT locking fixes

  amdkfd:
   - CRIU fixes

  vc4:
   - HDMI fixes to vc4.

  panfrost:
   - Make panfrost's uapi header compile with C++.
   - Handle 1 gb boundary correctly in panfrost mmu code.

  panel:
   - Add rotation quirks for 2 panels.

  rcar-du:
   - DSI Kconfig fix

  i915:
   - Fix sg_table handling in map_dma_buf
   - Send PSR update also on invalidate
   - Do not set cache_dirty for DGFX
   - Restore userptr probe_range behaviour"

* tag 'drm-fixes-2022-11-11' of git://anongit.freedesktop.org/drm/drm: (29 commits)
  drm/amd/display: only fill dirty rectangles when PSR is enabled
  drm/amdgpu: disable BACO on special BEIGE_GOBY card
  drm/amdgpu: Drop eviction lock when allocating PT BO
  drm/amdgpu: Unlock bo_list_mutex after error handling
  Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""
  drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32
  drm/amd/display: Fix gpio port mapping issue
  drm/amd/display: Fix reg timeout in enc314_enable_fifo
  drm/amd/display: Fix FCLK deviation and tool compile issues
  drm/amd/display: Zeromem mypipe heap struct before using it
  drm/amd/display: Update SR watermarks for DCN314
  drm/amdgpu: workaround for TLB seq race
  drm/amdkfd: Fix error handling in criu_checkpoint
  drm/amdkfd: Fix error handling in kfd_criu_restore_events
  drm/amd/pm: update SMU IP v13.0.4 msg interface header
  drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSI
  drm/panfrost: Split io-pgtable requests properly
  drm/amdgpu: Fix the lpfn checking condition in drm buddy
  drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017)
  drm: panel-orientation-quirks: Add quirk for Nanote UMPC-01
  ...

MIPS: pic32: treat port as signed integer

get_port_from_cmdline() returns an int, yet is assigned to a char, which
is wrong in its own right, but also, with char becoming unsigned, this
poses problems, because -1 is used as an error value. Further
complicating things, fw_init_early_console() is only ever called with a
-1 argument. Fix this up by removing the unused argument from
fw_init_early_console() and treating port as a proper signed integer.

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: jump_label: Fix compat branch range check

Cast upper bound of branch range to long to do signed compare,
avoid negative offset trigger this warning.

Fixes: 9b6584e35f40 ("MIPS: jump_label: Use compact branches for >= r6")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: alchemy: gpio: Include the right header

The local GPIO driver in the MIPS Alchemy is including the legacy
<linux/gpio.h> header but what it wants is to implement a GPIO
driver so include <linux/gpio/driver.h> instead.

Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: Loongson64: Add WARN_ON on kexec related kmalloc failed

Add WARN_ON on kexec related kmalloc failed, avoid to pass NULL pointer
to following memcpy and loongson_kexec_prepare.

Fixes: 6ce48897ce47 ("MIPS: Loongson64: Add kexec/kdump support")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: fix duplicate definitions for exported symbols

Building with clang-14 fails with:

AS arch/mips/kernel/relocate_kernel.o
<unknown>:0: error: symbol 'kexec_args' is already defined
<unknown>:0: error: symbol 'secondary_kexec_args' is already defined
<unknown>:0: error: symbol 'kexec_start_address' is already defined
<unknown>:0: error: symbol 'kexec_indirection_page' is already defined
<unknown>:0: error: symbol 'relocate_new_kernel_size' is already defined

It turns out EXPORT defined in asm/asm.h expands to a symbol definition,
so there is no need to define these symbols again. Remove duplicated
symbol definitions.

Fixes: 7aa1c8f47e7e ("MIPS: kdump: Add support")
Signed-off-by: Rongwei Zhang <pudh4418@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: boot/compressed: use __NO_FORTIFY

In the mips CONFIG_SYS_SUPPORTS_ZBOOT kernel, fix the compile error
when using CONFIG_FORTIFY_SOURCE=y

LD vmlinuz
mipsel-openwrt-linux-musl-ld: arch/mips/boot/compressed/decompress.o: in
function `decompress_kernel':
./include/linux/decompress/mm.h:(.text.decompress_kernel+0x177c):
undefined reference to `warn_slowpath_fmt'

kernel test robot helped identify this as related to fortify. The error
appeared with commit 54d9469bc515 ("fortify: Add run-time WARN for
cross-field memcpy()")
Link: https://lore.kernel.org/r/202209161144.x9xSqNQZ-lkp@intel.com/
Resolve this in the same style as commit cfecea6ead5f ("lib/string:
Move helper functions out of string.c")

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

KVM: x86/mmu: Block all page faults during kvm_zap_gfn_range()

When zapping a GFN range, pass 0 => ALL_ONES for the to-be-invalidated
range to effectively block all page faults while the zap is in-progress.
The invalidation helpers take a host virtual address, whereas zapping a
GFN obviously provides a guest physical address and with the wrong unit
of measurement (frame vs. byte).

Alternatively, KVM could walk all memslots to get the associated HVAs,
but thanks to SMM, that would require multiple lookups. And practically
speaking, kvm_zap_gfn_range() usage is quite rare and not a hot path,
e.g. MTRR and CR0.CD are almost guaranteed to be done only on vCPU0
during boot, and APICv inhibits are similarly infrequent operations.

Fixes: edb298c663fc ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range")
Reported-by: Chao Peng <chao.p.peng@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221111001841.2412598-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ata: libata-transport: fix error handling in ata_tdev_add()

In ata_tdev_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.

Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x3a0
lr : device_del+0x44/0x3a0
Call trace:
device_del+0x48/0x3a0
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tdev_delete+0x24/0x50 [libata]
ata_tlink_delete+0x40/0xa0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]

Fix this by checking and handling return value of transport_add_device()
in ata_tdev_add(). In the error path, device_del() is called to delete
the device which was added earlier in this function, and ata_tdev_free()
is called to free ata_dev.

Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ata: libata-transport: fix error handling in ata_tlink_add()

In ata_tlink_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.

Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 33 PID: 13850 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #12
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tlink_delete+0x88/0xb0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]

Fix this by checking and handling return value of transport_add_device()
in ata_tlink_add().

Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ata: libata-transport: fix error handling in ata_tport_add()

In ata_tport_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.

Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 12 PID: 13605 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #8
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tport_delete+0x34/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]

Fix this by checking and handling return value of transport_add_device()
in ata_tport_add().

Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ata: libata-transport: fix double ata_host_put() in ata_tport_add()

In the error path in ata_tport_add(), when calling put_device(),
ata_tport_release() is called, it will put the refcount of 'ap->host'.

And then ata_host_put() is called again, the refcount is decreased
to 0, ata_host_release() is called, all ports are freed and set to
null.

When unbinding the device after failure, ata_host_stop() is called
to release the resources, it leads a null-ptr-deref(), because all
the ports all freed and null.

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ata_host_stop+0x3c/0x84 [libata]
lr : release_nodes+0x64/0xd0
Call trace:
ata_host_stop+0x3c/0x84 [libata]
release_nodes+0x64/0xd0
devres_release_all+0xbc/0x1b0
device_unbind_cleanup+0x20/0x70
really_probe+0x158/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__driver_attach+0xb4/0x220
bus_for_each_dev+0x78/0xdc
driver_attach+0x2c/0x40
bus_add_driver+0x184/0x240
driver_register+0x80/0x13c
__pci_register_driver+0x4c/0x60
ahci_pci_driver_init+0x30/0x1000 [ahci]

Fix this by removing redundant ata_host_put() in the error path.

Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Merge tag 'net-6.1-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.

  Current release - new code bugs:

   - can: af_can: can_exit(): add missing dev_remove_pack() of
     canxl_packet

  Previous releases - regressions:

   - bpf, sockmap: fix the sk->sk_forward_alloc warning

   - wifi: mac80211: fix general-protection-fault in
     ieee80211_subif_start_xmit()

   - can: af_can: fix NULL pointer dereference in can_rx_register()

   - can: dev: fix skb drop check, avoid o-o-b access

   - nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()

  Previous releases - always broken:

   - bpf: fix wrong reg type conversion in release_reference()

   - gso: fix panic on frag_list with mixed head alloc types

   - wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()

   - wifi: mac80211: set TWT Information Frame Disabled bit as 1

   - eth: macsec offload related fixes, make sure to clear the keys from
     memory

   - tun: fix memory leaks in the use of napi_get_frags

   - tun: call napi_schedule_prep() to ensure we own a napi

   - tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent

   - ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
     network

   - tipc: fix a msg->req tlv length check

   - sctp: clear out_curr if all frag chunks of current msg are pruned,
     avoid list corruption

   - mctp: fix an error handling path in mctp_init(), avoid leaks"

* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
  MAINTAINERS: Move Vivien to CREDITS
  net: macvlan: fix memory leaks of macvlan_common_newlink
  ethernet: tundra: free irq when alloc ring failed in tsi108_open()
  net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
  ethernet: s2io: disable napi when start nic failed in s2io_card_up()
  net: atlantic: macsec: clear encryption keys from the stack
  net: phy: mscc: macsec: clear encryption keys when freeing a flow
  stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
  stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
  stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
  cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
  mctp: Fix an error handling path in mctp_init()
  stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
  net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
  net: cpsw: disable napi in cpsw_ndo_open()
  iavf: Fix VF driver counting VLAN 0 filters
  ice: Fix spurious interrupt during removal of trusted VF
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  ...

Merge tag 'mlx5-fixes-2022-11-09' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2022-11-02

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
  net/mlx5e: Fix tc acts array not to be dependent on enum order
  net/mlx5e: Fix usage of DMA sync API
  net/mlx5e: Add missing sanity checks for max TX WQE size
  net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
  net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
  net/mlx5: Allow async trigger completion execution on single CPU systems
  net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================

Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)

This series contains updates to ice and iavf drivers.

Norbert stops disabling VF queues that are not enabled for ice driver.

Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
====================

Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

eth: sp7021: drop free_netdev() from spl2sw_init_netdev()

It's not necessary to free netdev allocated with devm_alloc_etherdev()
and using free_netdev() leads to double free.

Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221109150116.2988194-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'drm-intel-fixes-2022-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix sg_table handling in map_dma_buf (Matthew Auld)
- Send PSR update also on invalidate (Jouni Högander)
- Do not set cache_dirty for DGFX (Niranjana Vishwanathapura)
- Restore userptr probe_range behaviour (Matthew Auld)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2zCy5q85qE9W0J8@tursulin-desk

RISC-V: vdso: Do not add missing symbols to version section in linker script

Recently, ld.lld moved from '--undefined-version' to
'--no-undefined-version' as the default, which breaks the compat vDSO
build:

  ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_gettimeofday' failed: symbol not defined
  ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_gettime' failed: symbol not defined
  ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_getres' failed: symbol not defined

These symbols are not present in the compat vDSO or the regular vDSO for
32-bit but they are unconditionally included in the version section of
the linker script, which is prohibited with '--no-undefined-version'.

Fix this issue by only including the symbols that are actually exported
in the version section of the linker script.

Link: https://github.com/ClangBuiltLinux/linux/issues/1756
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221108171324.3377226-1-nathan@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: fix reserved memory setup

Currently, RISC-V sets up reserved memory using the "early" copy of the
device tree. As a result, when trying to get a reserved memory region
using of_reserved_mem_lookup(), the pointer to reserved memory regions
is using the early, pre-virtual-memory address which causes a kernel
panic when trying to use the buffer's name:

Unable to handle kernel paging request at virtual address 00000000401c31ac
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
epc : string+0x4a/0xea
  ra : vsnprintf+0x1e4/0x336
epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0
  gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000
  t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20
  s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000
  a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff
  a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff
  s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008
  s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00
  s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002
  s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617
  t5 : ffffffff812f3618 t6 : ffffffff81203d08
status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d
[<ffffffff80338936>] vsnprintf+0x1e4/0x336
[<ffffffff80055ae2>] vprintk_store+0xf6/0x344
[<ffffffff80055d86>] vprintk_emit+0x56/0x192
[<ffffffff80055ed8>] vprintk_default+0x16/0x1e
[<ffffffff800563d2>] vprintk+0x72/0x80
[<ffffffff806813b2>] _printk+0x36/0x50
[<ffffffff8068af48>] print_reserved_mem+0x1c/0x24
[<ffffffff808057ec>] paging_init+0x528/0x5bc
[<ffffffff808031ae>] setup_arch+0xd0/0x592
[<ffffffff8080070e>] start_kernel+0x82/0x73c

early_init_fdt_scan_reserved_mem() takes no arguments as it operates on
initial_boot_params, which is populated by early_init_dt_verify(). On
RISC-V, early_init_dt_verify() is called twice. Once, directly, in
setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly,
very early in the boot process, by parse_dtb() when it calls
early_init_dt_scan_nodes().

This first call uses dtb_early_va to set initial_boot_params, which is
not usable later in the boot process when
early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the
corresponding call to early_init_dt_scan_nodes() uses fixmap addresses
and doesn't suffer the same fate.

Move early_init_fdt_scan_reserved_mem() further along the boot sequence,
after the direct call to early_init_dt_verify() in setup_arch() so that
the names use the correct virtual memory addresses. The above supposed
that CONFIG_BUILTIN_DTB was not set, but should work equally in the case
where it is - unflatted_and_copy_device_tree() also updates
initial_boot_params.

Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/linux-riscv/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20221107151524.3941467-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

arm64: efi: Fix handling of misaligned runtime regions and drop warning

Currently, when mapping the EFI runtime regions in the EFI page tables,
we complain about misaligned regions in a rather noisy way, using
WARN().

Not only does this produce a lot of irrelevant clutter in the log, it is
factually incorrect, as misaligned runtime regions are actually allowed
by the EFI spec as long as they don't require conflicting memory types
within the same 64k page.

So let's drop the warning, and tweak the code so that we
- take both the start and end of the region into account when checking
for misalignment
- only revert to RWX mappings for non-code regions if misaligned code
regions are also known to exist.

Cc: <stable@vger.kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines

Ampere Altra machines are reported to misbehave when the SetTime() EFI
runtime service is called after ExitBootServices() but before calling
SetVirtualAddressMap(). Given that the latter is horrid, pointless and
explicitly documented as optional by the EFI spec, we no longer invoke
it at boot if the configured size of the VA space guarantees that the
EFI runtime memory regions can remain mapped 1:1 like they are at boot
time.

On Ampere Altra machines, this results in SetTime() calls issued by the
rtc-efi driver triggering synchronous exceptions during boot. We can
now recover from those without bringing down the system entirely, due to
commit 23715a26c8d81291 ("arm64: efi: Recover from synchronous
exceptions occurring in firmware"). However, it would be better to avoid
the issue entirely, given that the firmware appears to remain in a funny
state after this.

So attempt to identify these machines based on the 'family' field in the
type #1 SMBIOS record, and call SetVirtualAddressMap() unconditionally
in that case.

Tested-by: Alexandru Elisei <alexandru.elisei@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Merge tag 'drm-fixes-20221109' of git://linuxtv.org/pinchartl/media into drm-fixes

R-Car DSI Kconfig dependency fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2u8+uM4A006XRPh@pendragon.ideasonboard.com

riscv: vdso: fix build with llvm

Even after commit 89fd4a1df829 ("riscv: jump_label: mark arguments as
const to satisfy asm constraints"), building with CC_OPTIMIZE_FOR_SIZE
+ LLVM=1 can reproduce below build error:

  CC      arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <built-in>:4:
In file included from lib/vdso/gettimeofday.c:5:
In file included from include/vdso/datapage.h:17:
In file included from include/vdso/processor.h:10:
In file included from arch/riscv/include/asm/vdso/processor.h:7:
In file included from include/linux/jump_label.h:112:
arch/riscv/include/asm/jump_label.h:42:3: error:
invalid operand for inline asm constraint 'i'
                "       .option push                            \n\t"
                ^
1 error generated.

I think the problem is when "-Os" is passed as CFLAGS, it's removed by
"CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os" which is
introduced in commit e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday
broke dynamic ftrace"), thus no optimization at all for vgettimeofday.c
arm64 does remove "-Os" as well, but it forces "-O2" after removing
"-Os".

I compared the generated vgettimeofday.o with "-O2" and "-Os",
I think no big performance difference. So let's tell the kbuild not
to remove "-Os" rather than follow arm64 style.

vdso related performance can be improved a lot when building kernel with
CC_OPTIMIZE_FOR_SIZE after this commit, ("-Os" VS no optimization)

Fixes: e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221031182943.2453-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

MAINTAINERS: Move Vivien to CREDITS

Last patch from Vivien was nearly 3 years ago and he has not reviewed or
responded to DSA patches since then, move to CREDITS.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221109231907.621678-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

riscv: process: fix kernel info leakage

thread_struct's s[12] may contain random kernel memory content, which
may be finally leaked to userspace. This is a security hole. Fix it
by clearing the s[12] array in thread_struct when fork.

As for kthread case, it's better to clear the s[12] array as well.

Fixes: 7db91e57a0ac ("RISC-V: Task implementation")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221029113450.4027-1-jszhang@kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/CAJF2gTSdVyAaM12T%2B7kXAdRPGS4VyuO08X1c7paE-n4Fr8OtRA@mail.gmail.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'drm-misc-fixes-2022-11-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v6.1-rc5:
- HDMI fixes to vc4.
- Make panfrost's uapi header compile with C++.
- Add rotation quirks for 2 panels.
- Fix s/r in amdgpu_vram_mgr_new
- Handle 1 gb boundary correctly in panfrost mmu code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e02de501-4b85-28a0-3f6e-751ca13f5f9d@linux.intel.com

io_uring: check for rollover of buffer ID when providing buffers

We already check if the chosen starting offset for the buffer IDs fit
within an unsigned short, as 65535 is the maximum value for a provided
buffer. But if the caller asks to add N buffers at offset M, and M + N
would exceed the size of the unsigned short, we simply add buffers with
wrapping around the ID.

This is not necessarily a bug and could in fact be a valid use case, but
it seems confusing and inconsistent with the initial check for starting
offset. Let's check for wrap consistently, and error the addition if we
do need to wrap.

Reported-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/726
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'for-6.1-rc4-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- revert memory optimization for scrub blocks, this misses errors in
   2nd and following blocks

- add exception for ENOMEM as reason for transaction abort to not print
   stack trace, syzbot has reported many

- zoned fixes:
      - fix locking imbalance during scrub
      - initialize zones for seeding device
      - initialize zones for cloned device structures

- when looking up device, change assertion to a real check as some of
   the search parameters can be passed by ioctl, reported by syzbot

- fix error pointer check in self tests

* tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix locking imbalance on scrub
  btrfs: zoned: initialize device's zone info for seeding
  btrfs: zoned: clone zoned device info when cloning a device
  Revert "btrfs: scrub: use larger block size for data extent scrub"
  btrfs: don't print stack trace when transaction is aborted due to ENOMEM
  btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
  btrfs: fix match incorrectly in dev_args_match_device

Merge tag 'soundwire-6.1-fixes' of git://git./linux/kernel/git/vkoul/soundwire

Pull soundwire fixes from Vinod Koul:
"Two qcom driver fixes for broadcast completion reinit and check for
  outanding writes. And a lone Intel driver fix for clock stop timeout"

* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: qcom: check for outanding writes before doing a read
  soundwire: qcom: reinit broadcast completion
  soundwire: intel: Initialize clock stop timeout

Merge tag 'phy-fixes-6.1' of git://git./linux/kernel/git/phy/linux-phy

Pull phy fixes from Vinod Koul:
"A bunch of odd driver fixes and a MAINTAINER email update:

   - Update Kishon's email

   - stms32 error code fix in driver probe

   - tegra: fix for checking valid pointer

   - qcom_qmp: null deref fix

   - sunplus: error check fix

   - ralink: add missing sentinel to table"

* tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ralink: mt7621-pci: add sentinel to quirks table
  phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe
  phy: qcom-qmp-combo: fix NULL-deref on runtime resume
  phy: tegra: xusb: Fix crash during pad power on/down
  phy: stm32: fix an error code in probe
  MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK

Merge tag 'hwlock-v6.1' of git://git./linux/kernel/git/remoteproc/linux

Pull hwspinlock updates from Bjorn Andersson:
"I apparently had missed tagging and sending this set of changes out
  during the 6.1 merge window. But did get the associated dts changes
  depending on this merged. The result is a regression in 6.1-rc on the
  affected, older, Qualcomm platforms - in for form of them not booting.

  So while these weren't regression fixes originally, they are now. It's
  not introducing new beahavior, but simply extending the existing new
  Devicetree model, to cover remaining platforms:

   - extend the DeviceTree binding and implementation for the Qualcomm
     hardware spinlock on some older platforms to follow the style of
     the newer ones where the DeviceTree representation does not rely on
     an intermediate syscon node"

* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
  hwspinlock: qcom: add support for MMIO on older SoCs
  hwspinlock: qcom: correct MMIO max register for newer SoCs
  dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
  dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs

net: macvlan: fix memory leaks of macvlan_common_newlink

kmemleak reports memory leaks in macvlan_common_newlink, as follows:

ip link add link eth0 name .. type macvlan mode source macaddr add
<MAC-ADDR>

kmemleak reports:

unreferenced object 0xffff8880109bb140 (size 64):
  comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff  ..........Z.....
    80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b  ..............kk
  backtrace:
    [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
    [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
    [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
    [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
    [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
    [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
    [<ffffffff81d98278>] rtnl_newlink+0x48/0x70
    ...

In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.

Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.

Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ethernet: tundra: free irq when alloc ring failed in tsi108_open()

When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix
it.

Fixes: 5e123b844a1c ("[PATCH] Add tsi108/9 On Chip Ethernet device driver support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109044016.126866-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ALSA: hda: fix potential memleak in 'add_widget_node'

As 'kobject_add' may allocated memory for 'kobject->name' when return error.
And in this function, if call 'kobject_add' failed didn't free kobject.
So call 'kobject_put' to recycling resources.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221110144539.2989354-1-yebin@huaweicloud.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme into block-6.1

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.1

- quiet user passthrough command errors (Keith Busch)
- fix memory leak in nvmet_subsys_attr_model_store_locked
- fix a memory leak in nvmet-auth (Sagi Grimberg)"

* tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme:
  nvmet: fix a memory leak
  nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked
  nvme: quiet user passthrough command errors

ALSA: memalloc: Don't fall back for SG-buffer with IOMMU

When the non-contiguous page allocation for SG buffer allocation
fails, the memalloc helper tries to fall back to the old page
allocation methods.  This would, however, result in the bogus page
addresses when IOMMU is enabled.  Usually in such a case, the fallback
allocation should fail as well, but occasionally it succeeds and
hitting a bad access.

The fallback was thought for non-IOMMU case, and as the error from
dma_alloc_noncontiguous() with IOMMU essentially implies a fatal
memory allocation error, we should return the error straightforwardly
without fallback.  This avoids the corner case like the above.

The patch also renames the local variable "dma_ops" with snd_ prefix
for avoiding the name conflict.

Fixes: a8d302a0b770 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2211041541090.3532114@eliteleevi.tm.intel.com
Link: https://lore.kernel.org/r/20221110132216.30605-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()

When failed to init rxq or txq in mv643xx_eth_open() for opening device,
napi isn't disabled. When open mv643xx_eth device next time, it will
trigger a BUG_ON() in napi_enable(). Compile tested only.

Fixes: 2257e05c1705 ("mv643xx_eth: get rid of receive-side locking")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ethernet: s2io: disable napi when start nic failed in s2io_card_up()

When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.

Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'macsec-clear-encryption-keys-in-h-w-drivers'

Antoine Tenart says:

====================
macsec: clear encryption keys in h/w drivers

Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading but some h/w drivers did a copy of the key
which need to be zeroed as well.

The MSCC PHY driver can actually be converted not to copy the encryption
key at all, but such patch would be quite difficult to backport. I'll
send a following up patch doing this in net-next once this series lands.

Tested on the MSCC PHY but not on the atlantic NIC.
====================

Link: https://lore.kernel.org/r/20221108153459.811293-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: atlantic: macsec: clear encryption keys from the stack

Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.

[4 Fixes tags below, all part of the same series, no need to split this]

Fixes: 9ff40a751a6f ("net: atlantic: MACSec ingress offload implementation")
Fixes: b8f8a0b7b5cb ("net: atlantic: MACSec ingress offload HW bindings")
Fixes: 27736563ce32 ("net: atlantic: MACSec egress offload implementation")
Fixes: 9d106c6dd81b ("net: atlantic: MACSec egress offload HW bindings")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phy: mscc: macsec: clear encryption keys when freeing a flow

Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.

Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'stmmac-dwmac-loongson-fixes-three-leaks'

Yang Yingliang says:

====================
stmmac: dwmac-loongson: fixes three leaks

patch #2 fixes missing pci_disable_device() in the error path in probe()
patch #1 and pach #3 fix missing pci_disable_msi() and of_node_put() in
error and remove() path.
====================

Link: https://lore.kernel.org/r/20221108114647.4144952-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

stmmac: dwmac-loongson: fix missing of_node_put() while module exiting

The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().

Fixes: 2ae34111fe4e ("stmmac: dwmac-loongson: fix invalid mdio_node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()

Add missing pci_disable_device() in the error path in loongson_dwmac_probe().

Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting

pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().

Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue

For Hamedal C20, the current rate is different from the runtime rate,
snd_usb_endpoint stop and close endpoint to resetting rate.
if snd_usb_endpoint close the endpoint, sometimes usb will
disconnect the device.

Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20221110063452.295110-1-aichao@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'amd-drm-fixes-6.1-2022-11-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.1-2022-11-09:

amdgpu:
- SMU 13.0.4 update
- GPUVM TLB race fix
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- Vega10 fan fix
- BACO fix for Beige Goby board
- PSR fix
- GPU VM PT locking fixes

amdkfd:
- CRIU fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109234554.6028-1-alexander.deucher@amd.com

ALSA: hda/realtek: Add Positivo C6300 model quirk

Positivo Master C6300 (1849:a233) require quirk for anabling headset-mic

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221109171732.5417-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()

When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied
during adapter goes up are not cleared. Fix it. Only be compiled, not be
tested.

Fixes: 18d79f721e0a ("cxgb4vf: Update port information in cxgb4vf_open()")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109012100.99132-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mctp: Fix an error handling path in mctp_init()

If mctp_neigh_init() return error, the routes resources should
be released in the error handling path. Otherwise some resources
leak.

Fixes: 4d8b9319282a ("mctp: Add neighbour implementation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221108095517.620115-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz

Current Intel platform has an output of ~976ms interval
when probed on 1 Pulse-per-Second(PPS) hardware pin.

The correct PTP clock frequency for PCH GbE should be 204.8MHz
instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.

Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com>
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()

When failed to bind qsets in cxgb_up() for opening device, napi isn't
disabled. When open cxgb3 device next time, it will trigger a BUG_ON()
in napi_enable(). Compile tested only.

Fixes: 48c4b6dbb7e2 ("cxgb3 - fix port up/down error path")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: cpsw: disable napi in cpsw_ndo_open()

When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for
opening device, napi isn't disabled. When open cpsw device next time, it
will report a invalid opcode issue. Compiled tested only.

Fixes: d354eb85d618 ("drivers: net: cpsw: dual_emac: simplify napi usage")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/amd/display: only fill dirty rectangles when PSR is enabled

Currently, we are calling fill_dc_dirty_rects() even if PSR isn't
supported by the relevant link in amdgpu_dm_commit_planes(), this is
undesirable especially because when drm.debug is enabled we are printing
messages in fill_dc_dirty_rects() that are only useful for debugging PSR
(and confusing otherwise). So, we can instead limit the filling of dirty
rectangles to only when PSR is enabled.

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable BACO on special BEIGE_GOBY card

Still avoid intermittent failure.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: Drop eviction lock when allocating PT BO

Re-take the eviction lock immediately again after the allocation is
completed, to fix circular locking warning with drm_buddy allocator.

Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are
called from multiple files.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Unlock bo_list_mutex after error handling

Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest
application.

If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as
caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the
kernel WARNING.

Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to
cleanup bo_list userptr bo.

WARNING: kfdtest/2930 still has locks held!
1 lock held by kfdtest/2930:
  (&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu]
  stack backtrace:
   dump_stack_lvl+0x44/0x57
   get_signal+0x79f/0xd00
   arch_do_signal_or_restart+0x36/0x7b0
   exit_to_user_mode_prepare+0xfd/0x1b0
   syscall_exit_to_user_mode+0x19/0x40
   do_syscall_64+0x40/0x80

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""

This reverts commit 4545ae2ed3f2f7c3f615a53399c9c8460ee5bca7.

The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine.
Test failure is caused by test case self.

Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32

[WHY?]
Data return times when using lowest memclk can be <= 60us, which can cause
underflow on high bandwidth displays with a workload.

[HOW?]
Enforce a minimum prefetch time during validation for low memclk modes.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix gpio port mapping issue

[Why]
1. Port of gpio has different mapping.

[How]
1. Add a dummy entry in mapping table.
2. Fix incorrect mask bit field access.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Steve Su <steve.su@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix reg timeout in enc314_enable_fifo

[Why]
The link enablement sequence can end up resetting the encoder while
the PHY symclk isn't yet on.

This means that waiting for symclk on will timeout, along with the reset
bit never asserting high.

This causes unnecessary delay when enabling the link and produces a
warning affecting multiple IGT tests.

[How]
Don't wait for the symclk to be on here because firmware already does.

Don't wait for reset if we know the symclk isn't on.

Split the reset into a helper function that checks the bit and decides
whether or not a delay is sufficient.

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/display: Fix FCLK deviation and tool compile issues

[Why]
Recent backports from open source do not have header inclusion pattern
that is consistent with inclusion style in the rest of the file. This
breaks the internal tool builds as well. A recent commit erronously
modified the original DML formula for calculating
ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation
from the golden values.

[How]
Change the way in which display_mode_vba.h is included so that it is
consistent with the inclusion style in rest of the file which also fixes
the tool build. Restore the DML formula to its original state to fix the
FCLK deviation.

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Zeromem mypipe heap struct before using it

[Why&How]
Bug was caused when moving variable from stack to heap because it was reusable
and garbage was left over, so we need to zero mem.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update SR watermarks for DCN314

[Why & How]
New values requested by hardware after fine-tuning.
Update for all memory types.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amdgpu: workaround for TLB seq race

It can happen that we query the sequence value before the callback
had a chance to run.

Workaround that by grabbing the fence lock and releasing it again.
Should be replaced by hw handling soon.

Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org # 5.19+
Fixes: 5255e146c99a6 ("drm/amdgpu: rework TLB flushing")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2113
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Stefan Springer <stefanspr94@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix error handling in criu_checkpoint

Checkpoint BOs last. That way we don't need to close dmabuf FDs if
something else fails later. This avoids problematic access to user mode
memory in the error handling code path.

criu_checkpoint_bos has its own error handling and cleanup that does not
depend on access to user memory.

In the private data, keep BOs before the remaining objects. This is
necessary to restore things in the correct order as restoring events
depends on the events-page BO being restored first.

Fixes: be072b06c739 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Reported-by: Jann Horn <jannh@google.com>
CC: Rajneesh Bhardwaj <Rajneesh.Bhardwaj@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org