drm/i915/gt: use intel_uncore_rmw when appropriate

This patch replaces all occurences of the form
intel_uncore_write(reg, intel_uncore_read(reg) OP val)
with intel_uncore_rmw.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143818.244339-2-andrzej.hajda@intel.com

drm/i915: use intel_uncore_rmw when appropriate

This patch replaces all occurences of the form
intel_uncore_write(reg, intel_uncore_read(reg) OP val)
with intel_uncore_rmw.

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019143818.244339-1-andrzej.hajda@intel.com

drm/i915/xelpg: Fix write to MTL_MCR_SELECTOR

A misplaced closing parenthesis caused the groupid/instanceid values to
be considered part of the ternary operator's condition instead of being
OR'd into the resulting value.

Fixes: f32898c94a10 ("drm/i915/xelpg: Add multicast steering")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019222437.3035182-1-matthew.d.roper@intel.com

drm/i915/selftests: Stop using kthread_stop()

Since a7c01fa93aeb ("signal: break out of wait loops on kthread_stop()")
kthread_stop() started asserting a pending signal which wreaks havoc with
a few of our selftests. Mainly because they are not fully expecting to
handle signals, but also cutting the intended test runtimes short due
signal_pending() now returning true (via __igt_timeout), which therefore
breaks both the patterns of:

  kthread_run()
  ..sleep for igt_timeout_ms to allow test to exercise stuff..
  kthread_stop()

And check for errors recorded in the thread.

And also:

    Main thread  |   Test thread
  ---------------+------------------------------
  kthread_run()  |
  kthread_stop() |  do stuff until __igt_timeout
 |  -- exits early due signal --

Where this kthread_stop() was assume would have a "join" semantics, which
it would have had if not the new signal assertion issue.

To recap, threads are now likely to catch a previously impossible
ERESTARTSYS or EINTR, marking the test as failed, or have a pointlessly
short run time.

To work around this start using kthread_work(er) API which provides
an explicit way of waiting for threads to exit. And for cases where
parent controls the test duration we add explicit signaling which threads
will now use instead of relying on kthread_should_stop().

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020130841.3845791-1-tvrtko.ursulin@linux.intel.com

drm/i915: s/HAS_BAR2_SMEM_STOLEN/HAS_LMEMBAR_SMEM_STOLEN/

The fact that LMEMBAR is BAR2 should be of no real interest
to anyone. So use the name of the BAR rather than its index.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005154159.18750-3-ville.syrjala@linux.intel.com
Acked-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Name our BARs based on the spec

We use all kinds of weird names for our base address registers.
Take the names from the spec and stick to them to avoid confusing
everyone.

The only exceptions are IOBAR and LMEMBAR since naming them
IOBAR_BAR and LMEMBAR_BAR looks too funny, and yet I think
that adding the _BAR to GTTMMADR & co. (which don't have one
in the spec name) does make it more clear what they are.
And IOBAR vs. GTTMMADR_BAR also looks a bit too inconsistent
for my taste.

v2: Fix gvt build
v3: Add GEN2_IO_BAR for completeness

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005195646.17201-1-ville.syrjala@linux.intel.com
Acked-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Extract intel_mmio_bar()

We have the same code to determine the MMIO BAR in
two places. Collect it to a single place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005154159.18750-1-ville.syrjala@linux.intel.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Refactor ttm ghost obj detection

Currently i915_ttm_to_gem() returns NULL for ttm ghost
object which makes it unclear when we should add a NULL
check for a caller of i915_ttm_to_gem() as ttm ghost
objects are expected behaviour for certain cases.

Create a separate function to detect ttm ghost object and
use that in places where we expect a ghost obj from ttm.

Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014131427.21102-1-nirmoy.das@intel.com

drm/i915/pvc: Update forcewake domain for CCS register ranges

The bspec was just updated with a correction to the forcewake domain
required when accessing registers in the CCS engine ranges (0x1a000 -
0x1ffff and 0x26000 - 0x27fff) on PVC; these ranges require a wake on
the RENDER domain, not the GT domain.

Bspec: 67609
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014233004.1053678-1-matthew.d.roper@intel.com

drm/i915/huc: bump timeout for delayed load and reduce print verbosity

We're observing sporadic HuC delayed load timeouts in CI, due to mei_pxp
binding completing later than we expected. HuC is still loaded when the
bind occurs, but in the meantime i915 has started allowing submission to
the VCS engines even if HuC is not there.
In most of the cases I've observed, the timeout was due to the
init/resume of another driver between i915 and mei hitting errors and
thus adding an extra delay, but HuC was still loaded before userspace
could submit, because the whole resume process time was increased by the
delays.

Given that there is no upper bound to the delay that can be introduced
by other drivers, I've reached the following compromise with the media
team:

1) i915 is going to bump the timeout to 5s, to reduce the probability
of reaching it. We still expect HuC to be loaded before userspace
starts submitting, so increasing the timeout should have no impact on
normal operations, but in case something weird happens we don't want to
stall video submissions for too long.

2) The media driver will cope with the failing submissions that manage
to go through between i915 init/resume complete and HuC loading, if any
ever happen. This could cause a small corruption of video playback
immediately after a resume (we should be safe on boot because the media
driver polls the HUC_STATUS ioctl before starting submissions).

Since we're accepting the timeout as a valid outcome, I'm also reducing
the print verbosity from error to notice.

v2: use separate prints for MEI GSC and MEI PXP init timeouts (John)
v3: add MISSING_CASE to the if-else chain (John)

References: https://gitlab.freedesktop.org/drm/intel/-/issues/7033
Fixes: 27536e03271d ("drm/i915/huc: track delayed HuC load with a fence")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013203245.1801788-1-daniele.ceraolospurio@intel.com

drm/i915/xelpmp: Add multicast steering for media GT

MTL's media IP (Xe_LPM+) only has a single type of steering ("OAADDRM")
which selects between media slice 0 and media slice 1.  We'll always
steer to media slice 0 unless it is fused off (which is the case when
VD0, VE0, and SFC0 are all reported as unavailable).

Bspec: 67789
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-15-matthew.d.roper@intel.com

drm/i915/xelpg: Add multicast steering

MTL's graphics IP (Xe_LPG) once again changes the multicast register
types and steering details.  Key changes from past platforms:
 * The number of instances of some MCR types (NODE, OAAL2, and GAM) vary
   according to the MTL subplatform and cannot be read from fuse
   registers.  However steering to instance #0 will always provided a
   non-terminated value, so we can lump these all into a single
   "instance0" table.
 * The MCR steering register (and its bitfields) has changed.

Unlike past platforms, we will be explicitly steering all types of MCR
accesses, including those for "SLICE" and "DSS" ranges; we no longer
rely on implicit steering.  On previous platforms, various
hardware/firmware agents that needed to access registers typically had
their own steering control registers, allowing them to perform multicast
steering without clobbering the CPU/kernel steering.  Starting with MTL,
more of these agents now share a single steering register (0xFD4) and it
is no longer safe for us to assume that the value will remain unchanged
from how we initialized it during startup.  There is also a slight
chance of race conditions between the driver and a hardware/firmware
agent, so the hardware provides a semaphore register that can be used to
coordinate access to the steering register.  Support for the semaphore
register will be introduced in a future patch.

v2:
 - Use Xe_LPG terminology instead of "MTL 3D" since it's the IP version
   we're matching on now rather than the platform.
 - Don't combine l3bank and mslice masks into a union.  It's not related
   to the other changes here and we might still need both of them on
   some future platform.
 - Separate debug dumping of steering settings to a separate helper
   function.  (Tvrtko)
 - Update debug dumping to include DSS ranges (and future-proof it so
   that any new ranges added on future platforms will also be dumped).
 - Restore MULTICAST bit at the end of rw_with_mcr_steering_fw() if we
   cleared it.  Also force the MULTICAST bit to true at the beginning of
   multicast writes just to be safe.  (Bala)

Bspec: 67788, 67112
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-14-matthew.d.roper@intel.com

drm/i915: Define multicast registers as a new type

Rather than treating multicast registers as 'i915_reg_t' let's define
them as a completely new type.  This will allow the compiler to help us
make sure we're using multicast-aware functions to operate on multicast
registers.

This plan does break down a bit in places where we're just maintaining
heterogeneous lists of registers (e.g., various MMIO whitelists used by
perf, GVT, etc.) rather than performing reads/writes.  We only really
care about the offset in those cases, so for now we can "cast" the
registers as non-MCR, leaving us with a list of i915_reg_t's, but we may
want to look for better ways to store mixed collections of i915_reg_t
and i915_mcr_reg_t in the future.

v2:
 - Add TLB invalidation registers
v3:
 - Make type checking of i915_mmio_reg_offset() stricter.  It will
   accept either i915_reg_t or i915_mcr_reg_t, but will now raise a
   compile error if any other type is passed, even if that type contains
   a 'reg' field.  (Jani)
 - Drop a ton of GVT changes; allowing i915_mmio_reg_offset() to take
   either an i915_reg_t or an i915_mcr_reg_t means that the huge lists
   of MMIO_D*() macros used in GVT will continue to work without
   modification.  We need only make changes to structures that have an
   explicit i915_reg_t in them now.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-13-matthew.d.roper@intel.com

drm/i915/gt: Add MCR-specific workaround initializers

Let's be more explicit about which of our workarounds are updating MCR
registers.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-12-matthew.d.roper@intel.com

drm/i915/guc: Handle save/restore of MCR registers explicitly

MCR registers can be placed on the GuC's save/restore list, but at the
moment they are always handled in a multicast manner (i.e., the GuC
reads one instance to save the value and then does a multicast write to
restore that single value to all instances).  In the future the GuC will
probably give us an alternate interface to do unicast per-instance
save/restore operations, so we should be very clear about which
registers on the list are MCR registers (and in the future which
save/restore behavior we want for them).

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-11-matthew.d.roper@intel.com

drm/i915/gt: Always use MCR functions on multicast registers

Rather than relying on the implicit behavior of intel_uncore_*()
functions, let's always use the intel_gt_mcr_*() functions to operate on
multicast/replicated registers.

v2:
 - Add TLB invalidation registers

v3:
 - Switch more uncore operations in mmio_invalidate_full() to MCR
   operations for Xe_HP.  (Bala)

Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-10-matthew.d.roper@intel.com

drm/i915: Define MCR registers explicitly

Rather than using the same _MMIO() macro to define MCR registers as
singleton registers, let's use a new MCR_REG() macro to make it clear
that these registers are special and should be handled accordingly.  For
now MCR_REG() will still generate an i915_reg_t with the given offset,
but we'll change that in future patches.

Bspec: 66673, 66696, 66534, 67609
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-9-matthew.d.roper@intel.com

drm/i915/gt: Add intel_gt_mcr_wait_for_reg_fw()

Xe_HP has some MCR registers that need to be polled for completion of
operations like TLB invalidation.  Those registers are in the GAM range,
which rolls up the status from each unit into the 'primary' instance's
value.  This makes it useful to have a dedicated 'wait for register'
function that handles this on MCR registers, similar to the
__intel_wait_for_register_fw() function we already have for regular
registers.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-8-matthew.d.roper@intel.com

drm/i915/xehp: Check for faults on primary GAM

On Xe_HP the fault registers are now in a multicast register range.
However as part of the GAM these registers follow special rules and we
need only read from the "primary" GAM's instance to get the information
we need.  So a single intel_gt_mcr_read_any() (which will automatically
steer to the primary GAM) is sufficient; we don't need to loop over each
instance of the MCR register.

v2:
 - Update more instances of fault registers.  (Bala)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-7-matthew.d.roper@intel.com

drm/i915/gt: Add intel_gt_mcr_multicast_rmw() operation

There are cases where we wish to read from any non-terminated MCR
register instance (or the primary instance in the case of GAM ranges),
clear/set some bits, and then write the value back out to the register
in a multicast manner.  Adding a "multicast RMW" will avoid the need to
open-code this.

v2:
 - Return a u32 to align with the recent change to intel_uncore_rmw.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-6-matthew.d.roper@intel.com

drm/i915/gt: Correct prefix on a few registers

We have a few registers that have existed for several hardware
generations, but are only used by the driver on Xe_HP and beyond.  In
cases where the Xe_HP version of the register is now replicated and uses
multicast behavior, but earlier generations were singleton, let's change
the register prefix to "XEHP_" to help clarify that we're using the
newer multicast form of the register.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-5-matthew.d.roper@intel.com

drm/i915/gt: Drop a few unused register definitions

Let's drop a few register definitions that are unused anywhere in the
driver today.  Since the referenced offsets are part of what is now
considered a multicast register region, the current definitions would
not be correct for use on any future platform.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-4-matthew.d.roper@intel.com

drm/i915/xehp: Create separate reg definitions for new MCR registers

Starting in Xe_HP, several registers our driver works with have been
converted from singleton registers into replicated registers with
multicast behavior.  Although the registers are still located at the
same MMIO offsets as on previous platforms, let's duplicate the register
definitions in preparation for upcoming patches that will handle
multicast registers in a special manner.

The registers that are now replicated on Xe_HP are:
 * PAT_INDEX (mslice replication)
 * FF_MODE2 (gslice replication)
 * COMMON_SLICE_CHICKEN3 (gslice replication)
 * SLICE_COMMON_ECO_CHICKEN1 (gslice replication)
 * SLICE_UNIT_LEVEL_CLKGATE (gslice replication)
 * LNCFCMOCS (lncf replication)

Note that there are a couple places in selftest_mocs.c where the
gen9 version of LNCFCMOCS is still used without regards for which
platform we're on.  Those cases are just doing an offset lookup and not
issuing any CPU reads/writes of the register, so the potentially
multicast nature of the register doesn't come into play.

v2:
 - Add commit message note about the unconditional GEN9_LNCFCMOCS usage
   in selftest_mocs.  (Bala)
 - Include some additional TLB registers.

Bspec: 66534
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-3-matthew.d.roper@intel.com

drm/i915/gen8: Create separate reg definitions for new MCR registers

Gen8 was the first time our hardware had multicast registers (or at
least the first time the multicast nature was exposed and MMIO accesses
could be steered).  There are some registers that transitioned from
singleton behavior to multicast during the gen7 -> gen8 transition;
let's duplicate the register definitions for those registers in
preparation for upcoming patches that will handle MCR registers in a
special manner.

The registers adjusted are:
 * MISCCPCTL
 * SAMPLER_INSTDONE
 * ROW_INSTDONE
 * ROW_CHICKEN2
 * HALF_SLICE_CHICKEN1
 * HALF_SLICE_CHICKEN3

v2:
 - Use the gen8 version of HALF_SLICE_CHICKEN3 in GVT's gen9 engine MMIO
   list.  (Bala)
 - Update to the gen8 version of MISCCPCTL in a couple new workarounds
   that were recently added for DG2/PVC.  (Bala)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-2-matthew.d.roper@intel.com

drm/i915/hwmon: Extend power/energy for XEHPSDV

Extend hwmon power/energy for XEHPSDV especially per gt level energy
usage.

v2: Update to latest HWMON spec (Ashutosh)
v3: Fix review comments (Ashutosh)
v4: Fix review comments (Anshuman)
v5: s/hwmon_device_register_with_info/
    devm_hwmon_device_register_with_info/ (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
    GEN12_RPSTAT1 is available for all Gen12+ (Andi)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-8-ashutosh.dixit@intel.com

drm/i915/hwmon: Expose power1_max_interval

Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
  - Fixed review comments (Anshuman)
  - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
    pkg_power_sku when it is valid (Ashutosh)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
    is valid the field PKG_WIN_MAX is not populated. So it is
    decided to stick to default value of PKG_WIN_MAX (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
    Fixed variable types in hwm_power1_max_interval_store (Andi)
    Documented PKG_MAX_WIN_DEFAULT (Andi)
    Removed else in hwm_attributes_visible (Andi)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-7-ashutosh.dixit@intel.com

drm/i915/hwmon: Expose card reactive critical power

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3: Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
v4: Use hwm_ prefix for static functions (Ashutosh)
v5: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v6: Change contact to intel-gfx (Rodrigo)

Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-6-ashutosh.dixit@intel.com

drm/i915/hwmon: Show device level energy usage

Use i915 HWMON to display device level energy input.

v2: Updated the date and kernel version in feature description
v3:
  - Cleaned up hwm_energy function and removed unused function
    i915_hwmon_energy_status_get (Ashutosh)
v4: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: Change contact to intel-gfx (Rodrigo)
    Change return type of hwm_energy to void (Andi)

Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-5-ashutosh.dixit@intel.com

drm/i915/hwmon: Power PL1 limit and TDP setting

Use i915 HWMON to display/modify dGfx power PL1 limit and TDP setting.

v2:
  - Fix review comments (Ashutosh)
  - Do not restore power1_max upon module unload/load sequence
    because on production systems modules are always loaded
    and not unloaded/reloaded (Ashutosh)
  - Fix review comments (Jani)
  - Remove endianness conversion (Ashutosh)
v3: Add power1_rated_max (Ashutosh)
v4:
  - Use macro HWMON_CHANNEL_INFO to define power channel (Guenter)
  - Update the date and kernel version in Documentation (Badal)
v5: Use hwm_ prefix for static functions (Ashutosh)
v6: Fix review comments (Ashutosh)
v7:
  - Define PCU_PACKAGE_POWER_SKU for DG1,DG2 and move
    PKG_PKG_TDP to intel_mchbar_regs.h (Anshuman)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v8: Change contact to intel-gfx (Rodrigo)
    Minor change to val_sku_unit init (Andi)

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-4-ashutosh.dixit@intel.com

drm/i915/hwmon: Add HWMON current voltage support

Use i915 HWMON subsystem to display current input voltage.

v2:
  - Updated date and kernel version in feature description
  - Fixed review comments (Ashutosh)
v3: Use macro HWMON_CHANNEL_INFO to define hwmon channel (Guenter)
v4:
  - Fixed review comments (Ashutosh)
  - Use hwm_ prefix for static functions (Ashutosh)
v5: Added unit of voltage as millivolts (Ashutosh)
v6: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v7: Change contact to intel-gfx (Rodrigo)
    GEN12_RPSTAT1 is available for all Gen12+ (Andi)
    Added Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
    to MAINTAINERS

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-3-ashutosh.dixit@intel.com

drm/i915/hwmon: Add HWMON infrastructure

The i915 HWMON module will be used to expose voltage, power and energy
values for dGfx. Here we set up i915 hwmon infrastructure including i915
hwmon registration, basic data structures and functions.

v2:
  - Create HWMON infra patch (Ashutosh)
  - Fixed review comments (Jani)
  - Remove "select HWMON" from i915/Kconfig (Jani)
v3: Use hwm_ prefix for static functions (Ashutosh)
v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
    doesn't work if hwmon is compiled as a module (Guenter)
v5: Fixed review comments (Jani)
v6: s/kzalloc/devm_kzalloc/ (Andi)
v7: s/hwmon_device_register_with_info/
      devm_hwmon_device_register_with_info/ (Ashutosh)

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-2-ashutosh.dixit@intel.com

drm/i915/uapi: expose GTT alignment

On some platforms we potentially have different alignment restrictions
depending on the memory type. We also now have different alignment
restrictions for the same region across different kernel versions.
Extend the region query to return the minimum required GTT alignment.

Testcase: igt@gem_create@create-ext-placement-alignment
Testcase: igt@i915_query@query-regions-sanity-check
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-2-matthew.auld@intel.com

drm/i915: enable PS64 support for DG2

It turns out that on production DG2/ATS HW we should have support for
PS64. This feature allows to provide a 64K TLB hint at the PTE level,
which is a lot more flexible than the current method of enabling 64K GTT
pages for the entire page-table, since that leads to all kinds of
annoying restrictions, as documented in:

commit caa574ffc4aaf4f29b890223878c63e2e7772f62
Author: Matthew Auld <matthew.auld@intel.com>
Date:   Sat Feb 19 00:17:49 2022 +0530

    drm/i915/uapi: document behaviour for DG2 64K support

    On discrete platforms like DG2, we need to support a minimum page size
    of 64K when dealing with device local-memory. This is quite tricky for
    various reasons, so try to document the new implicit uapi for this.

With PS64, we can now drop the 2M GTT alignment restriction, and instead
only require 64K or larger when dealing with lmem. We still use the
compact-pt layout when possible, but only when we are certain that this
doesn't interfere with userspace.

Note that this is a change in uAPI behaviour, but hopefully shouldn't be
a concern (IGT is at least able to autodetect the alignment), since we
are only making the GTT alignment constraint less restrictive.

Based on a patch from CQ Tang.

v2: update the comment wrt scratch page
v3: (Nirmoy)
 - Fix the selftest to actually use the random size, plus some comment
   improvements, also drop the rem stuff.

Reported-by: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004114915.221708-1-matthew.auld@intel.com

drm/i915/trace: Remove unused frequency trace

Commit 3e7abf814193 ("drm/i915: Extract GT render power state management")
removes the "trace_intel_gpu_freq_change()" trace points but
their definition was left without users. Remove it.

Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011135940.367048-1-andi.shyti@linux.intel.com

drm/i915: Fix display problems after resume

Commit 39a2bd34c933 ("drm/i915: Use the vma resource as argument for gtt
binding / unbinding") introduced a regression that due to the vma resource
tracking of the binding state, dpt ptes were not correctly repopulated.
Fix this by clearing the vma resource state before repopulating.
The state will subsequently be restored by the bind_vma operation.

Fixes: 39a2bd34c933 ("drm/i915: Use the vma resource as argument for gtt binding / unbinding")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912121957.31310-1-thomas.hellstrom@linux.intel.com
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.18+
Reported-and-tested-by: Kevin Boulain <kevinboulain@gmail.com>
Tested-by: David de Sousa <davidesousa@gmail.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005121159.340245-1-thomas.hellstrom@linux.intel.com

drm/i915/slpc: Update the frequency debugfs

Read the values stored in the SLPC structures. Remove the
fields that are no longer valid (like RPS interrupts) as
well.

v2: Move all functionality changes to this patch (Jani)
v3: Fix compile warning and if condition (Jani)

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005155943.34747-3-vinay.belgaumkar@intel.com

drm/i915: Add a wrapper for frequency debugfs

Move it to the RPS source file.

v2: Separate out code movement and functional changes (Jani)

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005155943.34747-2-vinay.belgaumkar@intel.com

drm/i915/perf: remove redundant variable 'taken'

The assignment to variable taken is redundant and so it can be
removed as well as the variable too.

Cleans up clang-scan build warnings:
warning: Although the value stored to 'taken' is used in the enclosing
expression, the value is never actually read from 'taken'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007195345.2749911-1-colin.i.king@gmail.com

drm/i915/gem: remove redundant assignments to variable ret

The variable ret is being assigned with a value that is never read
both before and after a while-loop. The variable is being re-assigned
inside the while-loop and afterwards on the call to the function
i915_gem_object_lock_interruptible. Remove the redundants assignments.

Cleans up clang scan-build warnings:

warning: Although the value stored to 'ret' is used in the
enclosing expression, the value is never actually read
from 'ret' [deadcode.DeadStores]

warning: Value stored to 'ret' is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007194745.2749277-1-colin.i.king@gmail.com

drm/i915: restore stolen memory behaviour for DG2

Restore the previous behaviour here where we compare the
pci_resource_len() with the actual lmem_size, and not the dsm size,
since dsm here is just some subset snipped off the end of the lmem.
Otherwise we will incorrectly report an io_size > 0 on small-bar
systems.

It doesn't looks like MTL is expecting small-bar with its stolen memory,
based on:

  GEM_BUG_ON(pci_resource_len(pdev, GEN12_LMEM_BAR) != SZ_256M)
  GEM_BUG_ON((dsm_size + SZ_8M) > lmem_size)

So just move the HAS_BAR2_SMEM_STOLEN() check first, which then ignores
the small bar part, and we can go back to checking lmem_size against the
BAR size.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7007
Fixes: dbb2ffbfd708 ("drm/i915/mtl: enable local stolen memory")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005153148.758822-2-matthew.auld@intel.com

drm/i915: add back GEN12_BDSM_MASK

The mask was added in commit e5f415bfc5c2 ("drm/i915: Add missing mask
when reading GEN12_DSMBASE"), but then looks to be dropped in some
unrelated code movement in commit dbb2ffbfd708 ("drm/i915/mtl: enable
local stolen memory") without explanation. Add it back.

Fixes: dbb2ffbfd708 ("drm/i915/mtl: enable local stolen memory")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005153148.758822-1-matthew.auld@intel.com

drm/i915: check memory is mappable in read_from_page

On small-bar systems we could be given something non-mappable here,
which leads to nasty oops. Make this nicer by checking if the resource
is mappable or not, and return an error otherwise.

v2: drop GEM_BUG_ON(flags & I915_BO_ALLOC_GPU_ONLY)

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-5-matthew.auld@intel.com

drm/i915/display: consider DG2_RC_CCS_CC when migrating buffers

For these types of display buffers, we need to able to CPU access some
part of the backing memory in prepare_plane_clear_colors(). As a result
we need to ensure we always place in the mappable part of lmem, which
becomes necessary on small-bar systems.

v2(Nirmoy & Ville):
 - Add some commentary for why we need to CPU access the buffer.
 - Split out the other changes, so we just consider the display change
   here.
v3:
 - Handle this in the dpt path.
v4(Ville):
 - Drop the intel_fb_rc_ccs_cc_plane() sanity check in
   pin_and_fence_fb_obj(), since we can also trigger this on DG1 it
   seems.

Fixes: eb1c535f0d69 ("drm/i915: turn on small BAR support")
Reported-by: Jianshui Yu <jianshui.yu@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-4-matthew.auld@intel.com

drm/i915: allow control over the flags when migrating

In the next patch we want to move the object (if the current resource is
not compatible), to the mappable part of lmem for some display buffers.
Currently that requires being able to unset the I915_BO_ALLOC_GPU_ONLY
hint.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-3-matthew.auld@intel.com

drm/i915/display: handle migration for dpt

On platforms like DG2, it looks like the dpt path here is missing the
migrate-to-lmem step on discrete platforms.

v2:
  - Move the vma_pin() under the for_i915_gem_ww(), otherwise the
    object can be moved after dropping the lock and then doing the pin.

Fixes: 33e7a975103c ("drm/i915/xelpd: First stab at DPT support")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-2-matthew.auld@intel.com

drm/i915: remove the TODO in pin_and_fence_fb_obj

The copy is async (if there even is one), but when later updating the
GGTT we always sync against the binding, which will in turn sync against
any moves.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jianshui Yu <jianshui.yu@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-1-matthew.auld@intel.com

drm/i915/guc: Fix revocation of non-persistent contexts

Patch which added graceful exit for non-persistent contexts missed the
fact it is not enough to set the exiting flag on a context and let the
backend handle it from there.

GuC backend cannot handle it because it runs independently in the
firmware and driver might not see the requests ever again. Patch also
missed the fact some usages of intel_context_is_banned in the GuC backend
needed replacing with newly introduced intel_context_is_schedulable.

Fix the first issue by calling into backend revoke when we know this is
the last chance to do it. Fix the second issue by replacing
intel_context_is_banned with intel_context_is_schedulable, which should
always be safe since latter is a superset of the former.

v2:
 * Just call ce->ops->revoke unconditionally. (Andrzej)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 45c64ecf97ee ("drm/i915: Improve user experience and driver robustness under SIGINT or similar")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003121630.694249-1-tvrtko.ursulin@linux.intel.com

drm/i915: Document and future-proof preemption control policy

Intel hardware allows some preemption settings to be controlled either
by the kernel-mode driver exclusively, or placed under control of the
user-mode drivers; on Linux we always select the userspace control
option.  The various registers involved in this are not documented very
clearly; let's add some clarifying comments to help explain how this all
works and provide some history on why our Linux drivers take the
approach they do (which I believe differs from the path taken by certain
other operating systems' drivers).

While we're at it, let's also remove the graphics version 12 upper bound
on this programming.  As described, we don't have any plans to move away
from UMD control of preemption settings on future platforms, and there's
currently no reason to believe that the hardware will fundamentally
change how these registers and settings work after version 12.

Bspec: 45921, 45858, 45863
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Wayne Boyer <wayne.boyer@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907212410.22623-1-matthew.d.roper@intel.com

drm/i915/ttm: implement access_memory

It looks like we need this for local-memory, if we want to use ptrace.
Something more is still needed if we want to handle non-mappable memory,
which looks quite annoying.

v2:
  - ttm_bo_kmap doesn't seem to work well here, and seems to expect
    contiguous resource.
v3(Andi):
  - s/PAGE_SIZE/bytes/ when passing in the size of the mapping.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6989
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003172819.99245-1-matthew.auld@intel.com

drm/i915/gt: Remove unused function prototype

Remove unused function prototype; intel_gt_create_kobj()

Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003170242.1246830-1-gwan-gyeong.mun@intel.com

drm/i915/huc: define gsc-compatible HuC fw for DG2

The fw name is different and we need to record the fact that the blob is
gsc-loaded, so add a new macro to help.

Note: A-step DG2 G10 does not support HuC loading via GSC and would
require a separate firmware to be loaded the legacy way, but that's
not a production stepping so we're not going to bother.

v2: rebase on new fw fetch logic

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-15-daniele.ceraolospurio@intel.com

drm/i915/huc: better define HuC status getparam possible return values.

The current HuC status getparam return values are a bit confusing in
regards to what happens in some scenarios. In particular, most of the
error cases cause the ioctl to return an error, but a couple of them,
INIT_FAIL and LOAD_FAIL, are not explicitly handled and neither is
their expected return value documented; these 2 error cases therefore
end up into the catch-all umbrella of the "HuC not loaded" case, with
this case therefore including both some error scenarios and the load
in progress one.

The updates included in this patch change the handling so that all
error cases behave the same way, i.e. return an errno code, and so
that the HuC load in progress case is unambiguous.

The patch also includes a small change to the FW init path to make sure
we always transition to an error state if something goes wrong.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-14-daniele.ceraolospurio@intel.com

drm/i915/huc: stall media submission until HuC is loaded

Wait on the fence to be signalled to avoid the submissions finding HuC
not yet loaded.

v2: use dedicaded wait_queue_entry for waiting in HuC load, as submitq
can't be re-used for it.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-13-daniele.ceraolospurio@intel.com

drm/i915/huc: track delayed HuC load with a fence

Given that HuC load is delayed on DG2, this patch adds support for a fence
that can be used to wait for load completion. No waiters are added in this
patch (they're coming up in the next one), to keep the focus of the
patch on the tracking logic.

The full HuC loading flow on boot DG2 is as follows:
1) i915 exports the GSC as an aux device;
2) the mei-gsc driver is loaded on the aux device;
3) the mei-pxp component is loaded;
4) mei-pxp calls back into i915 and we load the HuC.

Between steps 1 and 2 there can be several seconds of gap, mainly due to
the kernel doing other work during the boot.
The resume flow is slightly different, because we don't need to
re-expose or re-probe the aux device, so we go directly to step 3 once
i915 and mei-gsc have completed their resume flow.

Here's an example of the boot timing, captured with some logs added to
i915:

[   17.908307] [drm] adding GSC device
[   17.915717] [drm] i915 probe done
[   22.282917] [drm] mei-gsc bound
[   22.938153] [drm] HuC authenticated

Also to note is that if something goes wrong during GSC HW init the
mei-gsc driver will still bind, but steps 3 and 4 will not happen.

The status tracking is done by registering a bus_notifier to receive a
callback when the mei-gsc driver binds, with a large enough timeout to
account for delays. Once mei-gsc is bound, we switch to a smaller
timeout to wait for the mei-pxp component to load.
The fence is signalled on HuC load complete or if anything goes wrong in
any of the tracking steps. Timeout are enforced via hrtimer callbacks.

v2: fix includes (Jani)
v5: gsc_notifier() remove unneeded ()

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-12-daniele.ceraolospurio@intel.com

drm/i915/dg2: setup HuC loading via GSC

The GSC will perform both the load and the authentication, so we just
need to check the auth bit after the GSC has replied.
Since we require the PXP module to load the HuC, the earliest we can
trigger the load is during the pxp_bind operation.

Note that GSC-loaded HuC survives GT reset, so we need to just mark it
as ready when we re-init the GT HW.

V2: move setting of HuC fw error state to the failure path of the HuC
auth function, so it covers both the legacy and new auth flows
V4:
1. Fix typo in the commit message
2. style fix in intel_huc_wait_for_auth_complete()

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com

drm/i915/pxp: add huc authentication and loading command

Add support for loading HuC via a pxp stream command.

V4:
1. Remove unnecessary include in intel_pxp_huc.h (Jani)
2. Adjust copyright year to 2022

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-10-daniele.ceraolospurio@intel.com

drm/i915/pxp: implement function for sending tee stream command

Command to be sent via the stream interface are written to a local
memory page, whose address is then provided to the GSC.
The interface supports providing a full sg with multiple pages for both
input and output messages, but since for now we only aim to support short
and synchronous messages we can use a single page for both input and
output.

Note that the mei interface expects an sg of 4k pages, while our lmem pages
are 64k. If we ever need to support more than 4k we'll need to convert.
Added a TODO comment to the code to record this.

Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-9-daniele.ceraolospurio@intel.com

drm/i915/pxp: load the pxp module when we have a gsc-loaded huc

The mei_pxp module is required to send the command to load authenticate
the HuC to the GSC even if pxp is not in use for protected content
management.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-8-daniele.ceraolospurio@intel.com

mei: pxp: support matching with a gfx discrete card

With on-boards graphics card, both i915 and MEI
are in the same device hierarchy with the same parent,
while for discrete gfx card the MEI is its child device.
Adjust the match function for that scenario
by matching MEI parent device with i915.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-7-daniele.ceraolospurio@intel.com

mei: pxp: add command streamer API to the PXP driver

The discrete graphics card with GSC firmware
using command streamer API hence it requires to enhance
pxp module with the new gsc_command() handler.

The handler is implemented via mei_pxp_gsc_command() which is
just a thin wrapper around mei_cldev_send_gsc_command()

Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-6-daniele.ceraolospurio@intel.com

mei: bus: extend bus API to support command streamer API

Add mei bus API for sending gsc commands: mei_cldev_send_gsc_command()

The GSC commands are originated in the graphics stack
and are in form of SGL DMA buffers.
The GSC commands are synchronous, the response is received
in the same call on the out sg list buffers.
The function setups pointers for in and out sg lists in the
mei sgl extended header and sends it to the firmware.

Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-5-daniele.ceraolospurio@intel.com

mei: adjust extended header kdocs

Fix kdoc for struct mei_ext_hdr and mei_ext_begin().

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-4-daniele.ceraolospurio@intel.com

mei: bus: enable sending gsc commands

GSC command is and extended header containing a scatter gather
list and without a data buffer. Using MEI_CL_IO_SGL flag,
the caller send the GSC command as a data and the function internally
moves it to the extended header.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-3-daniele.ceraolospurio@intel.com

mei: add support to GSC extended header

GSC extend header is of variable size and data
is provided in a sgl list inside the header
and not in the data buffers, need to enable the path.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-2-daniele.ceraolospurio@intel.com

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/ehl: Update MOCS table for EHL

Add these extra EHL entries back since we have
drm-tip commit 13d29c823738
("drm/i915/ehl: unconditionally flush the pages on acquire")
introduces proper flushing to make it work as expected.

Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Fixes: 046091758b50 ("Revert "drm/i915/ehl: Update MOCS table for EHL"")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930133223.2757282-1-tejas.upadhyay@intel.com

drm/i915/gt: Fix platform prefix

Different handling for XeHP and later platforms should be using the
xehp prefix, not gen125. Rename them.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930050903.3479619-4-lucas.demarchi@intel.com

drm/i915/gt: Document function to decode register state context

It's not obvious how the encode/decode of the per platform tables is
done. Document it so while adding tables for new platforms people can be
confident they right things is being done.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930050903.3479619-3-lucas.demarchi@intel.com

drm/i915: Fix __gen125_emit_bb_start() without WA

ce->wa_bb_page is allocated only for graphics version 12. However
__gen125_emit_bb_start() is used for any graphics version >= 12.50. For
the currently supported platforms this is not an issue, but for future
ones there's a mismatch causing the jump to
`wa_offset + DG2_PREDICATE_RESULT_BB` to be invalid since wa_offset is
not correct.

As in other places in the driver, check for graphics version "greater or
equal" to future-proof the support for new platforms.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930050903.3479619-2-lucas.demarchi@intel.com

drm/i915/mtl: enable local stolen memory

As an integrated GPU, MTL does not have local memory and HAS_LMEM()
returns false.  However the platform's stolen memory is presented via
BAR2 (i.e., the BAR we traditionally consider to be the GMADR on IGFX)
and should be managed by the driver the same way that local memory is
on dgpu platforms (which includes setting the "lmem" bit on page table
entries).  We use the term "local stolen memory" to refer to this
model.

The major difference from the traditional BAR2 (GMADR) is that
the stolen area is mapped via the BAR2 while in the former BAR2 is an
aperture into the GTT VA through which access are made into stolen area.

BSPEC: 53098, 63830

v2:
1. dropped is_dsm_invalid, updated valid_stolen_size check from Lucas
(Jani, Lucas)
2. drop lmembar_is_igpu_stolen
3. revert to referring GFXMEM_BAR as GEN12_LMEM_BAR (Lucas)

v3:(Jani)
1. rename get_mtl_gms_size to mtl_get_gms_size
2. define register for MMIO address

v4:(Matt)
1. Use REG_FIELD_GET to read GMS value
2. replace the calculations with SZ_256M/SZ_8M

v5: Include more details to commit message on how it is different from
earlier platforms (Anshuman)

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Original-author: CQ Tang
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929114658.145287-1-aravind.iddamsetty@intel.com

drm/i915/mtl: Define engine context layouts

The part of the media and blitter engine contexts that we care about for
setting up an initial state on MTL are nearly similar to DG2 (and PVC).
The difference being PRT_BB_STATE being replaced with NOP.

For render/compute engines, the part of the context images are nearly
the same, although the layout had a very slight change --- one POSH
register was removed and the placement of some LRI/noops adjusted
slightly to compensate.

v2:
 - Dg2, mtl xcs offsets slightly vary. Use a separate offsets array(Bala)
 - Add missing nop in xcs offsets(Bala)
v3:
 - Fix the spacing for nop in xcs offset(MattR)
v4:
 - Fix rcs register offset(MattR)
v4.1:
 - Fix commit message(Lucas)

Bspec: 46261, 46260, 45585
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Licas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928155511.2379663-1-radhakrishna.sripada@intel.com

drm/msm: Fix build break with recent mm tree

9178e3dcb121 ("mm: discard __GFP_ATOMIC") removed __GFP_ATOMIC,
replacing it with a check for not __GFP_DIRECT_RECLAIM.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929161404.2769414-1-robdclark@gmail.com

Merge tag 'drm-intel-next-fixes-2022-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix release build bug in 'remove GuC log size module parameters' (John Harrison)
- Remove ipc_enabled from struct drm_i915_private (Jani Nikula)
- Do not cleanup obj with NULL bo->resource (Nirmoy Das)
- Fix device info for devices without display (Jani Nikula)
- Force DPLL calculation for TC ports after readout (Ville Syrjälä)
- Use i915_vm_put on ppgtt_create error paths (Chris Wilson)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YzWqtwPNxAe+r9FO@tursulin-desk

drm/i915/gt: Flush to global observation point before breadcrumb write

Add flag to pipecontrol instruction to ensure in-flight writes are
flushed to global observation point. Also split the pipecontrol
instruction like we have in gen8.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/5886
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927171313.6553-1-nirmoy.das@intel.com

drm/i915: remove excessive i915_gem_drain_freed_objects

i915_gem_drain_workqueue() call i915_gem_drain_freed_objects()
so no need to call that again.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923073515.23093-2-nirmoy.das@intel.com

drm/i915: Fix a potential UAF at device unload

i915_gem_drain_freed_objects() might not be enough to
free all the objects and RCU delayed work might get
scheduled after the i915 device struct gets freed.

Call i915_gem_drain_workqueue() to catch all RCU delayed work.

Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923073515.23093-1-nirmoy.das@intel.com

drm/i915/guc/slpc: Add SLPC selftest live_slpc_power

A fundamental assumption is that at lower frequencies,
not only do we run slower, but we save power compared to
higher frequencies.
live_slpc_power checks if running at low frequency saves power

v2: re-use code to measure power
    fixed cosmetic review comments (Vinay)

Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923110043.789178-4-riana.tauro@intel.com

drm/i915/selftests: Add helper function measure_power

move the power measurement and the triangle filter
to a different function. No functional changes.

Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923110043.789178-3-riana.tauro@intel.com

drm/i915/guc/slpc: Run SLPC selftests on all tiles

Run slpc selftests on all tiles

Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923110043.789178-2-riana.tauro@intel.com

drm/i915: Remove unwanted pointer unpacking

In await_fence_array(), unpacking syncobj pointer is not needed.
Remove it.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927181346.1187-1-niranjana.vishwanathapura@intel.com

Merge tag 'amd-drm-next-6.1-2022-09-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.1-2022-09-23:

amdgpu:
- SDMA fix
- Add new firmware types to debugfs/IOCTL version queries
- Misc spelling and grammar fixes
- Misc code cleanups
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- CS cleanup
- Gang submit support
- Clang fixes
- Non-DC audio fix
- GPUVM locking fixes
- Vega10 PWN fan speed fix

amdkgd:
- MQD manager cleanup
- Misc spelling and grammar fixes

UAPI:
- Add new firmware types to the FW version query IOCTL

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923215729.6061-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2022-09-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 6.1:

UAPI Changes:

Cross-subsystem Changes:
  - dma-buf: Improve signaling when debugging

Core Changes:
  - Backlight handling improvements
  - format-helper: Add drm_fb_build_fourcc_list()
  - fourcc: Kunit tests improvements
  - modes: Add DRM_MODE_INIT() macro
  - plane: Remove drm_plane_init(), Allocate planes with drm_universal_plane_alloc()
  - plane-helper: Add drm_plane_helper_atomic_check()
  - probe-helper: Add drm_connector_helper_get_modes_fixed() and
    drm_crtc_helper_mode_valid_fixed()
  - tests: Conversion to parametrized tests, test name consistency

Driver Changes:
  - amdgpu: Fix for a VRAM eviction issue
  - ast: Resolution handling improvements
  - mediatek: small code improvements for DP
  - omap: Refcounting fix, small improvements
  - rockchip: RK3568 support, Gamma support for RK3399
  - sun4i: Build failure fix when !OF
  - udl: Multiple fixes here and there
  - vc4: HDMI hotplug handling improvements
  - vkms: Warning fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923073943.d43tne5hni3iknlv@houat

Merge tag 'drm-msm-next-2022-09-22' of https://gitlab.freedesktop.org/drm/msm into drm-next

msm-next for v6.1

DPU:
- simplified VBIF configuration
- cleaned up CTL interfaces to accept indices rather than flush masks

DSI:
- removed unused msm_display_dsc_config struct
- switch regulator calls to new bulk API
- switched to use PANEL_BRIDGE for directly attached panels

DSI PHY:
- converted drivers to use parent_hws instead of parent_names

DP:
- cleaned up pixel_rate handling

HDMI PHY:
- turned hdmi-phy-8996 into OF clk provider

core:
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
  device nodes

gpu+gem:
- Shrinker + LRU re-work:
  - adds a shared GEM LRU+shrinker helper and moves msm over to that
  - reduces lock contention between retire and submit by avoiding the
    need to acquire obj lock in retire path (and instead using resv
    seeing obj's busyness in the shrinker
  - fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsrfrr9v1oR9S4oYfOs9jm=jbKQiwPBTrCRHrjYerJJFA@mail.gmail.com

drm/i915/guc: Enable compute scheduling on DG2

DG2 has issues. To work around one of these the GuC must schedule
apps in an exclusive manner across both RCS and CCS. That is, if a
context from app X is running on RCS then all CCS engines must sit
idle even if there are contexts from apps Y, Z, ... waiting to run. A
certain OS favours RCS to the total starvation of CCS. Linux does not.
Hence the GuC now has a scheduling policy setting to control this
abitration.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922201209.1446343-2-John.C.Harrison@Intel.com

Merge tag 'mediatek-drm-next-6.1' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 6.1

1. Drop of_gpio header
2. Remove the unneeded result

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922234804.18557-1-chunkuang.hu@kernel.org

Merge tag 'exynos-drm-next-for-v6.1' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Cleanup
- Use drm_display_info.is_hdmi instead of drm_detect_hdmi_monitor()
  for efficiency.
Fixup
- Correct return type of mixer_mode_valid and hdmi_mode_valid functions.
  This was reported by Dan Carpenter, https://github.com/ClangBuiltLinux/linux/issues/1703

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926020723.270065-1-inki.dae@samsung.com

drm/i915/gt: Bump the reset-failure timeout to 60s

If attempting to perform a GT reset takes long than 5 seconds (including
resetting the display for gen3/4), then we declare all hope lost and
discard all user work and wedge the device to prevent further
misbehaviour. 5 seconds is too short a time for such drastic action, as
we may be stuck on other timeouts and watchdogs. If we allow a little
bit longer before hitting the big red button, we should at the very
least capture other hung task indicators pointing towards the reason why
the reset was hanging; and allow more marginal cases the extra headroom
to complete the reset without further collateral damage.

Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6448
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916204823.1897089-1-ashutosh.dixit@intel.com

drm/i915/gt: Move scratch page into system memory on all platforms

The scratch page should never be accessed, and is only assigned as a
filler page to redirection invalid userspace access. It is not of a
performance concern and so we prefer to have a single consistent
configuration across all platforms, reducing the pressure on device
memory and avoiding the direct device access that would be required to
initialise the scratch page.

Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926155018.109678-1-matthew.auld@intel.com

drm/i915/gt: Use i915_vm_put on ppgtt_create error paths

Now that the scratch page and page directories have a reference back to
the i915_address_space, we cannot do an immediate free of the ppgtt upon
error as those buffer objects will perform a later i915_vm_put in their
deferred frees.

The downside is that by replacing the onion unwind along the error
paths, the ppgtt cleanup must handle a partially constructed vm. This
includes ensuring that the vm->cleanup is set prior to the error path.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6900
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Fixes: 4d8151ae5329 ("drm/i915: Don't free shared locks while shared")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926153333.102195-1-matthew.auld@intel.com
(cherry picked from commit c286558f58535cf97b717b946d6c96d774a09d17)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Force DPLL calculation for TC ports after readout

We always allocate two DPLLs (TC and TBT) for TC ports. This
is because we can't know ahead of time wherher we need to put
the PHY into DP-Alt or TBT mode.

However during readout we can obviously only read out the state
of the DPLL that the port is actually using. Thus the state after
readout will not have both DPLLs populated.

We run into problems if during readout the TC port is in DP-Alt
mode, but we then perform a modeset on the port without going
through the full .compute_config() machinery, and during said
modeset the port cannot be switched back into DP-Alt mode and
we need to take the TBT fallback path. Such a modeset can
happen eg. due to cdclk reprogramming.

This wasn't a problem earlier because we did all the DPLL
calculations much later in the modeset. So even if flagged
a modeset very late we'd still have gone through the DPLL
calculations. But now all the DPLL calculations happen much
earlier and so we need to deal with it, or else we'll attempt
a modeset without a DPLL.

To guarantee that we always have both DPLLs fully cal/ulated
for TC ports force a full modeset computation during the
initial commit.

v2: Avoid bitwise operation on bool (Jani)
    Call the return variable 'fastset' to convey its meaning

Reported-by: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: b000abd3b3d2 ("drm/i915: Do .crtc_compute_clock() earlier")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922191236.4194-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit eddb4afcb6c533d3f75f5f1a77e292fece27570e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: fix device info for devices without display

Commit 00c6cbfd4e8a ("drm/i915: move pipe_mask and cpu_transcoder_mask
to runtime info") moved the pipe_mask member from struct
intel_device_info to intel_runtime_info, but overlooked some of our
platforms initializing device info .display = {}. This is significant,
as pipe_mask is the single point of truth for a device having a display
or not; the platforms in question left pipe_mask to whatever was set for
the platforms they "inherit" from in the complex macro scheme we have.

Add new NO_DISPLAY macro initializing .__runtime.pipe_mask = 0, which
will cause the device info .display sub-struct to be zeroed in
intel_device_info_runtime_init(). A better solution (or simply audit of
proper use of HAS_DISPLAY() checks) is required before moving forward
with [1].

Also clear all the display related members in runtime info if there's no
display. The latter is a bit tedious, but it's for completeness at this
time, to ensure similar functionality as before.

[1] https://lore.kernel.org/r/dfda1bf67f02ceb07c280b7a13216405fd1f7a34.1660137416.git.jani.nikula@intel.com

Fixes: 00c6cbfd4e8a ("drm/i915: move pipe_mask and cpu_transcoder_mask to runtime info")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Maarten Lankhort <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082642.3451961-1-jani.nikula@intel.com
(cherry picked from commit 86570b7b126bd516aba770d1fc4c971c55c66dca)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Do not cleanup obj with NULL bo->resource

For delayed BO release i915_ttm_delete_mem_notify()
gets called twice, once with proper bo->resource and
another time with NULL. We shouldn't do anything for
the 2nd time as we already cleaned up the obj once.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6850
Fixes: ad74457a6b5a96 ("drm/i915/dgfx: Release mmap on rpm suspend")
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220920170628.3391-1-nirmoy.das@intel.com
(cherry picked from commit fb7818989976317cc2e78008aa2df7b9fe423c86)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/display: remove ipc_enabled from struct drm_i915_private

The ipc_enabled member was supposed to be moved under the display wm
sub-struct, but due to a rebase fail only the new one was added and the
old one was left behind. Finish the job.

Fixes: 70296670f672 ("drm/i915/display: move IPC under display wm sub-struct")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916113850.3712354-1-jani.nikula@intel.com
(cherry picked from commit 48176104003058e2ba540fd815ec46c350d65926)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/guc: Fix release build bug in 'remove log size module parameters'

A patch was merged to remove the GuC log size override module
parameters. That patch was broken and caused kernel error messages on
boot in non CONFIG_DEBUG_GUC|GEM builds:
[   12.085121] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log crash dump size!
[   12.092035] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log debug size!

So fit it.

Fixes: f54e515c9180 ("drm/i915/guc: Remove log size module parameters")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913010929.2734885-2-John.C.Harrison@Intel.com
(cherry picked from commit 01f0ce3e859619ea84104d668a87ace924bd12df)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Improve debug print in vm_fault_ttm

Print the error code returned by __i915_ttm_migrate()
for better debuggability.

v2: Fix kernel test robot warning.
v3: Fix dim checkpatch warning.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6889
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923143730.13498-1-nirmoy.das@intel.com

drm/i915/gt: Use i915_vm_put on ppgtt_create error paths

Now that the scratch page and page directories have a reference back to
the i915_address_space, we cannot do an immediate free of the ppgtt upon
error as those buffer objects will perform a later i915_vm_put in their
deferred frees.

The downside is that by replacing the onion unwind along the error
paths, the ppgtt cleanup must handle a partially constructed vm. This
includes ensuring that the vm->cleanup is set prior to the error path.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6900
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Fixes: 4d8151ae5329 ("drm/i915: Don't free shared locks while shared")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926153333.102195-1-matthew.auld@intel.com

drm/i915/gt: Restrict forced preemption to the active context

When we submit a new pair of contexts to ELSP for execution, we start a
timer by which point we expect the HW to have switched execution to the
pending contexts. If the promotion to the new pair of contexts has not
occurred, we declare the executing context to have hung and force the
preemption to take place by resetting the engine and resubmitting the
new contexts.

This can lead to an unfair situation where almost all of the preemption
timeout is consumed by the first context which just switches into the
second context immediately prior to the timer firing and triggering the
preemption reset (assuming that the timer interrupts before we process
the CS events for the context switch). The second context hasn't yet had
a chance to yield to the incoming ELSP (and send the ACk for the
promotion) and so ends up being blamed for the reset.

If we see that a context switch has occurred since setting the
preemption timeout, but have not yet received the ACK for the ELSP
promotion, rearm the preemption timer and check again. This is
especially significant if the first context was not schedulable and so
we used the shortest timer possible, greatly increasing the chance of
accidentally blaming the second innocent context.

Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption")
Fixes: d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921135258.1714873-1-andrzej.hajda@intel.com

drm/i915: move i915_coherent_map_type() to i915_gem_pages.c and un-inline

The inline function has no place in i915_drv.h. Move it away, un-inline,
and untangle some header dependencies while at it.

Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914163514.1837467-1-jani.nikula@intel.com

drm/exynos: Fix return type for mixer_mode_valid and hdmi_mode_valid

The field mode_valid in exynos_drm_crtc_ops is expected to be of type enum
drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,
                                   const struct drm_display_mode *mode);

Likewise for mode_valid in drm_connector_helper_funcs.

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of mixer_mode_valid and hdmi_mode_valid should be changed
from int to enum drm_mode_status.

Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://protect2.fireeye.com/v1/url?k=3e644738-5fef521d-3e65cc77-
74fe485cbff6-36ad29bf912d3c9f&q=1&e=5cc06174-77dd-4abd-ab50-
155da5711aa3&u=https%3A%2F%2Fgithub.com%2FClangBuiltLinux%2Flinux%2Fissues%2F
1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: replace drm_detect_hdmi_monitor() with drm_display_info.is_hdmi

Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi.

This driver calls drm_detect_hdmi_monitor() to receive the same
information, which is less efficient.

Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead.

Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>