selftests: fib_nexthops: Fix wrong mausezahn invocation

commit a5c9ca76a1c61fb5e4c35de8eb25aa925b03c9e4 upstream.

For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an
error is returned:

 # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn"
 Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address.
  Invalid command line parameters!

Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvneta: fix error message when MTU too large for XDP

commit 0d136f5cd9a7ba6ded7f8ff17e8b1ba680f37625 upstream.

The error message says that "Jumbo frames are not supported on XDP", but
the code checks for mtu > MVNETA_MAX_RX_BUF_SIZE, not mtu > 1500.

Fix this error message.

Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210105172333.21613-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dp: Track pm_qos per connector

commit 9397d66212cdf7a21c66523f1583e5d63a609e84 upstream.

Since multiple connectors may run intel_dp_aux_xfer conncurrently, a
single global pm_qos does not suffice. (One connector may disable the
dma-latency boost prematurely while the second is still depending on
it.) Instead of a single global pm_qos, track the pm_qos request for
each intel_dp.

v2: Move the pm_qos setup/teardown to intel_dp_aux_init/fini

Fixes: 9ee32fea5fe8 ("drm/i915: irq-drive the dp aux communication")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201230202309.23982-1-chris@chris-wilson.co.uk
(cherry picked from commit b3304591f14b437b6bccd8dbff06006c11837031)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: disable force link UP during port init procedure

commit 87508224485323ce2d4e7fb929ec80f51adcc238 upstream.

Force link UP can be enabled by bootloader during tftpboot
and breaks NFS support.
Force link UP disabled during port init procedure.

Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: qcom-rpmh-regulator: correct hfsmps515 definition

commit df6b92fa40050e59ea89784294bf6d04c0c47705 upstream.

According to the datasheet pm8009's HFS515 regulators have 16mV
resolution rather than declared 1.6 mV. Correct the resolution.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: cpufeature: remove non-exist CONFIG_KVM_ARM_HOST

commit 45ba7b195a369f35cb39094fdb32efe5908b34ad upstream.

Commit d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST") deletes
CONFIG_KVM_ARM_HOST option, it should use CONFIG_KVM instead.

Just remove CONFIG_KVM_ARM_HOST here.

Fixes: d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST")
Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1609760324-92271-1-git-send-email-shannon.zhao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wan: ds26522: select CONFIG_BITREVERSE

commit 69931e11288520c250152180ecf9b6ac5e6e40ed upstream.

Without this, the driver runs into a link failure

arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'

Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: debugfs: Fix a memory leak when calling regmap_attach_dev

commit cffa4b2122f5f3e53cf3d529bbc74651f95856d5 upstream.

After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again

unreferenced object 0xd8399b80 (size 64):
  comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s)
  hex dump (first 32 bytes):
64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72
dummy-iomuxc-gpr
40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69
@20e4000..R[.~Bi
  backtrace:
    [<ca384d6f>] kasprintf+0x2c/0x54
    [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc
    [<bc4181da>] __regmap_init+0xc38/0xd88
    [<1f7e0609>] of_syscon_register+0x168/0x294
    [<735e8766>] device_node_get_regmap+0x6c/0x98
    [<d96c8982>] imx6ul_init_machine+0x20/0x88
    [<0456565b>] customize_machine+0x1c/0x30
    [<d07393d8>] do_one_initcall+0x80/0x3ac
    [<7e584867>] kernel_init_freeable+0x170/0x1f0
    [<80074741>] kernel_init+0x8/0x120
    [<285d6f28>] ret_from_fork+0x14/0x20
    [<00000000>] 0x0

Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix two double free cases

commit 7a6eb072a9548492ead086f3e820e9aac71c7138 upstream.

mlx5e_create_ttc_table_groups() frees ft->g on failure of
kvzalloc(), but such failure will be caught by its caller
in mlx5e_create_ttc_table() and ft->g will be freed again
in mlx5e_destroy_flow_table(). The same issue also occurs
in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after
kfree() to avoid double free.

Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets")
Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups

commit 5b0bb12c58ac7d22e05b5bfdaa30a116c8c32e32 upstream.

When mlx5_create_flow_group() fails, ft->g should be
freed just like when kvzalloc() fails. The caller of
mlx5e_create_l2_table_groups() does not catch this
issue on failure, which leads to memleak.

Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-tcp: Fix possible race of io_work and direct send

commit 5c11f7d9f843bdd24cd29b95401938bc3f168070 upstream.

We may send a request (with or without its data) from two paths:

  1. From our I/O context nvme_tcp_io_work which is triggered from:
    - queue_rq
    - r2t reception
    - socket data_ready and write_space callbacks
  2. Directly from queue_rq if the send_list is empty (because we want to
     save the context switch associated with scheduling our io_work).

However, given that now we have the send_mutex, we may run into a race
condition where none of these contexts will send the pending payload to
the controller. Both io_work send path and queue_rq send path
opportunistically attempt to acquire the send_mutex however queue_rq only
attempts to send a single request, and if io_work context fails to
acquire the send_mutex it will complete without rescheduling itself.

The race can trigger with the following sequence:

  1. queue_rq sends request (no incapsule data) and blocks
  2. RX path receives r2t - prepares data PDU to send, adds h2cdata PDU
     to the send_list and schedules io_work
  3. io_work triggers and cannot acquire the send_mutex - because of (1),
     ends without self rescheduling
  4. queue_rq completes the send, and completes

==> no context will send the h2cdata - timeout.

Fix this by having queue_rq sending as much as it can from the send_list
such that if it still has any left, its because the socket buffer is
full and the socket write_space callback will trigger, thus guaranteeing
that a context will be scheduled to send the h2cdata PDU.

Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context")
Reported-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reported-by: Samuel Jones <sjones@kalrayinc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Fix compilation failure for net.o with older glibc

commit 6f02b540d7597f357bc6ee711346761045d4e108 upstream.

For older glibc ~2.17, #include'ing both linux/if.h and net/if.h
fails due to complaints about redefinition of interface flags:

  CC       net.o
In file included from net.c:13:0:
/usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’
  IFF_UP    = 1<<0,  /* sysfs */
  ^
/usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here
     IFF_UP = 0x1,  /* Interface is up.  */

The issue was fixed in kernel headers in [1], but since compilation
of net.c picks up system headers the problem can recur.

Dropping #include <linux/if.h> resolves the issue and it is
not needed for compilation anyhow.

[1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/

Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1609948746-15369-1-git-send-email-alan.maguire@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/intel: Fix memleak in intel_irq_remapping_alloc

commit ff2b46d7cff80d27d82f7f3252711f4ca1666129 upstream.

When irq_domain_get_irq_data() or irqd_cfg() fails
at i == 0, data allocated by kzalloc() has not been
freed before returning, which leads to memleak.

Fixes: b106ee63abcc ("irq_remapping/vt-d: Enhance Intel IR driver to support hierarchical irqdomains")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210105051837.32118-1-dinghao.liu@zju.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb()

commit 1efd17e7acb6692bffc6c58718f41f27fdfd62f5 upstream.

Use IS_ALIGNED() instead. Otherwise, an unaligned address will be ignored.

Fixes: 33cd6e642d6a ("iommu/vt-d: Flush PASID-based iotlb for iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201231005323.2178523-1-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zonefs: select CONFIG_CRC32

commit 4f8b848788f77c7f5c3bd98febce66b7aa14785f upstream.

When CRC32 is disabled, zonefs cannot be linked:

ld: fs/zonefs/super.o: in function `zonefs_fill_super':

Add a Kconfig 'select' statement for it.

Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: select CONFIG_CRC32

commit 19cd3403cb0d522dd5e10188eef85817de29e26e upstream.

Without CRC32 support, this fails to link:

arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init':
pblk-init.c:(.text+0x2654): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit':
pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le'

Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: rsxx: select CONFIG_CRC32

commit 36a106a4c1c100d55ba3d32a21ef748cfcd4fa99 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config':
config.c:(.text+0x124): undefined reference to `crc32_le'

Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: select CONFIG_CRC32

commit e186620d7bf11b274b985b839c38266d7918cc05 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow

Fixes: 151a9706503f ("wil6210: firmware download")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: dp83640: select CONFIG_CRC32

commit f9d6f94132f01d2a552dcbab54fa56496638186d upstream.

Without crc32, this driver fails to link:

arm-linux-gnueabi-ld: drivers/net/phy/dp83640.o: in function `match':
dp83640.c:(.text+0x476c): undefined reference to `crc32_le'

Fixes: 539e44d26855 ("dp83640: Include hash in timestamp/packet matching")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: select CONFIG_CRC32

commit 2860d45a589818dd8ffd90cdc4bcf77f36a5a6be upstream.

Without this, the driver fails to link:

lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump':
qed_debug.c:(.text+0x4068): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump':
qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump':
qed_debug.c:(.text+0x6000): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump':
qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow

Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA

commit 095507dc1350b3a2b8b39fdc05edba0c10859eca upstream.

Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and
!CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The
limit will default to ~0ULL, effectively spanning the whole memory,
which is too high for a configuration that expects low memory to be
capped at 4GB.

Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit
when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour
CONFIG_ZONE_DMA32, or span the entire memory when not enabled.

Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: xilinx_dma: fix mixed_enum_type coverity warning

commit 2d5efea64472469117dc1a9a39530069e95b21e9 upstream.

Typecast the fls(width -1) with (enum dmaengine_alignment) in
xilinx_dma_chan_probe function to fix the coverity warning.

Addresses-Coverity: Event mixed_enum_type.
Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()

commit faeb0731be0a31e2246b21a85fa7dabbd750101d upstream.

In xilinx_dma_child_probe function, the nr_channels variable is
passed to of_property_read_u32() which expects an u32 return value
pointer. Modify the nr_channels variable type from int to u32 to
fix the incompatible parameter coverity warning.

Addresses-Coverity: Event incompatible_param.
Fixes: 1a9e7a03c761 ("dmaengine: vdma: Add support for mulit-channel dma mode")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: xilinx_dma: check dma_async_device_register return value

commit 99974aedbd73523969afb09f33c6e3047cd0ddae upstream.

dma_async_device_register() can return non-zero error code. Add
condition to check the return value of dma_async_device_register
function and handle the error path.

Addresses-Coverity: Event check_return.
Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of the probe function

commit d645148cc82ca7fbacaa601414a552184e9c6dd3 upstream.

'disable_xdmac()' should be called in the error handling path of the
probe function to undo a previous 'enable_xdmac()' call, as already
done in the remove function.

Fixes: a6e9be055d47 ("dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platforms")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201219132800.183254-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function

commit 33cbd54dc515cc04b5a603603414222b4bb1448d upstream.

'mtk_hsdma_hw_deinit()' should be called in the error handling path of the
probe function to undo a previous 'mtk_hsdma_hw_init()' call, as already
done in the remove function.

Fixes: 548c4597e984 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201219124718.182664-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: qcom: fix rpmh link failures

commit 512d4a26abdbd11c6ffa03032740e5ab3c62c55b upstream.

When CONFIG_COMPILE_TEST is set, it is possible to build some
of the interconnect drivers into the kernel while their dependencies
are loadable modules, which is bad:

arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit':
(.text+0x1f8): undefined reference to `rpmh_invalidate'
arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init':
(.text+0x2ac): undefined reference to `cmd_db_read_addr'
arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data'

The exact dependencies are a bit complicated, so split them out into a
hidden Kconfig symbol that all drivers can in turn depend on to get it
right.

Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interconnect: imx: Add a missing of_node_put after of_device_is_available

commit c6174c0e058fc0a54e0b9787c44cb24b0a8d0217 upstream.

Add an 'of_node_put()' call when a tested device node is not available.

Fixes: f0d8048525d7 ("interconnect: Add imx core driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201206121304.29381-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET

commit 5342fd4255021ef0c4ce7be52eea1c4ebda11c63 upstream.

If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature
set, it means the cache device is created with obsoleted layout with
obso_bucket_site_hi. Now bcache does not support this feature bit, a new
BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added
for a better layout to support large bucket size.

For the legacy compatibility purpose, if a cache device created with
obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache
devices attached to this cache set should be set to read-only. Then the
dirty data can be written back to backing device before re-create the
cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit
by the latest bcache-tools.

This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit
when running a cache set and attach a bcache device to the cache set. If
this bit is set,
- When run a cache set, print an error kernel message to indicate all
  following attached bcache device will be read-only.
- When attach a bcache device, print an error kernel message to indicate
  the attached bcache device will be read-only, and ask users to update
  to latest bcache-tools.

Such change is only for cache device whose bucket size >= 32MB, this is
for the zoned SSD and almost nobody uses such large bucket size at this
moment. If you don't explicit set a large bucket size for a zoned SSD,
such change is totally transparent to your bcache device.

Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mediatek: Fix apdma and i2c hand-shake timeout

commit 05f6f7271a38c482c5021967433f7b698e102c45 upstream.

With the apdma remove hand-shake signal, it requirs special
operation timing to reset i2c manually, otherwise the interrupt
will not be triggered, i2c transmission will be timeout.

Fixes: 8426fe70cfa4("i2c: mediatek: Add apdma sync in i2c driver")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated

commit 0b3ea2a06de1f52ea30865e227e109a5fd3b6214 upstream.

gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to
it to be terminated with a zero-ed out entry.

So we need to allocate one more entry then we will use.

Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: stm32: FIFO threshold level - fix align packet size

commit a590370d918fc66c62df6620445791fbe840344a upstream.

if cur_bpw <= 8 and xfer_len < 4 then the value of fthlv will be 1 and
SPI registers content may have been lost.

* If SPI data register is accessed as a 16-bit register and DSIZE <= 8bit,
  better to select FTHLV = 2, 4, 6 etc

* If SPI data register is accessed as a 32-bit register and DSIZE > 8bit,
  better to select FTHLV = 2, 4, 6 etc, while if DSIZE <= 8bit,
  better to select FTHLV = 4, 8, 12 etc

Signed-off-by: Roman Guskov <rguskov@dh-electronics.com>
Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20201221123532.27272-1-rguskov@dh-electronics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case

commit 4aa1464acbe3697710279a4bd65cb4801ed30425 upstream.

In commit 7ba9bdcb91f6 ("spi: spi-geni-qcom: Don't keep a local state
variable") we changed handle_fifo_timeout() so that we set
"mas->cur_xfer" to NULL to make absolutely sure that we don't mess
with the buffers from the previous transfer in the timeout case.

Unfortunately, this caused the IRQ handler to dereference NULL in some
cases.  One case:

  CPU0                           CPU1
  ----                           ----
                                 setup_fifo_xfer()
                                  geni_se_setup_m_cmd()
                                 <hardware starts transfer>
                                 <transfer completes in hardware>
                                 <hardware sets M_RX_FIFO_WATERMARK_EN in m_irq>
                                 ...
                                 handle_fifo_timeout()
                                  spin_lock_irq(mas->lock)
                                  mas->cur_xfer = NULL
                                  geni_se_cancel_m_cmd()
                                  spin_unlock_irq(mas->lock)

  geni_spi_isr()
   spin_lock(mas->lock)
   if (m_irq & M_RX_FIFO_WATERMARK_EN)
    geni_spi_handle_rx()
     mas->cur_xfer NULL dereference!

tl;dr: Seriously delayed interrupts for RX/TX can lead to timeout
handling setting mas->cur_xfer to NULL.

Let's check for the NULL transfer in the TX and RX cases and reset the
watermark or clear out the fifo respectively to put the hardware back
into a sane state.

NOTE: things still could get confused if we get timeouts all the way
through handle_fifo_timeout() and then start a new transfer because
interrupts from the old transfer / cancel / abort could still be
pending.  A future patch will help this corner case.

Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201217142842.v3.1.I99ee04f0cb823415df59bd4f550d6ff5756e43d6@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get()

commit 943bdd0cecad06da8392a33093230e30e501eccc upstream.

Currently there is an unlikely case where cpufreq_cpu_get() returns a
NULL policy and this will cause a NULL pointer dereference later on.

Fix this by passing the policy to transition_frequency_fidvid() from
the caller and hence eliminating the need for the cpufreq_cpu_get()
and cpufreq_cpu_put().

Thanks to Viresh Kumar for suggesting the fix.

Addresses-Coverity: ("Dereference null return")
Fixes: b43a7ffbf33b ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending

commit 690d8b917bbe64772cb0b652311bcd50908aea6b upstream.

If we got a timeout when trying to send an abort command then it means
that we just got 3 timeouts in a row:

1. The original timeout that caused handle_fifo_timeout() to be
   called.
2. A one second timeout waiting for the cancel command to finish.
3. A one second timeout waiting for the abort command to finish.

SPI is clocked by the controller, so nothing (aside from a hardware
fault or a totally broken sequencer) should be causing the actual
commands to fail in hardware.  However, even though the hardware
itself is not expected to fail (and it'd be hard to predict how we
should handle things if it did), it's easy to hit the timeout case by
simply blocking our interrupt handler from running for a long period
of time.  Obviously the system is in pretty bad shape if a interrupt
handler is blocked for > 2 seconds, but there are certainly bugs (even
bugs in other unrelated drivers) that can make this happen.

Let's make things a bit more robust against this case.  If we fail to
abort we'll set a flag and then we'll block all future transfers until
we have no more interrupts pending.

Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201217142842.v3.2.Ibade998ed587e070388b4bf58801f1107a40eb53@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_pciefd: select CONFIG_CRC32

commit 1d48595c786b1b9dc6be301e8d7f6fc74e9882aa upstream.

Without crc32, this driver fails to link:

arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe':
kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be'

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop()

commit c4aec381ab98c9189d47b935832541d520f1f67f upstream.

In m_can_class_register() the clock is started, but stopped on exit. When
calling m_can_class_unregister(), the clock is stopped a second time.

This patch removes the erroneous m_can_clk_stop() in  m_can_class_unregister().

Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Sriram Dash <sriram.dash@samsung.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20201215103238.524029-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver

commit aee2b3ccc8a63d1cd7da6a8a153d1f3712d40826 upstream.

According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has
the same bittiming constants as a m_can revision 3.2.x/3.3.0.

The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so
remove the tcan4x5x specific bittiming values and rely on the values in the
m_can driver, which are selected according to core revision.

Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20201215103238.524029-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Clarify build error if no vmlinux

commit 1a3449c19407a28f7019a887cdf0d6ba2444751a upstream.

If Makefile cannot find any of the vmlinux's in its VMLINUX_BTF_PATHS list,
it tries to run btftool incorrectly, with VMLINUX_BTF unset:

    bpftool btf dump file $(VMLINUX_BTF) format c

Such that the keyword 'format' is misinterpreted as the path to vmlinux.
The resulting build error message is fairly cryptic:

      GEN      vmlinux.h
    Error: failed to load BTF from format: No such file or directory

This patch makes the failure reason clearer by yielding this instead:

    Makefile:...: *** Cannot find a vmlinux for VMLINUX_BTF at any of
    "{paths}".  Stop.

Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201215182011.15755-1-kamal@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()

commit 595a334148449bd1d27cf5d6fcb3b0d718cb1b9f upstream.

If the dw_edma_alloc_burst() function fails then we free "chunk" but
it's still on the "desc->chunk->list" list so it will lead to a use
after free.  Also the "->chunks_alloc" count is incremented when it
shouldn't be.

In current kernels small allocations are guaranteed to succeed and
dw_edma_alloc_burst() can't fail so this will not actually affect
runtime.

Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/X9dTBFrUPEvvW7qc@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: sprd: use a specific timeout to avoid system hang up issue

commit 0b884fe71f9ee6a5df35e677154256ea2099ebb8 upstream.

If the i2c device SCL bus being pulled up due to some exception before
message transfer done, the system cannot receive the completing interrupt
signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT
jiffies eclipse, that would make the system seemed hang up. To avoid that
happen, this patch adds a specific timeout for message transfer.

Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Signed-off-by: Linhua Xu <linhua.xu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
[wsa: changed errno to ETIMEDOUT]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: omap_device: fix idling of devices during probe

commit ec76c2eea903947202098090bbe07a739b5246e9 upstream.

On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER
during probe of the second mmc used for wifi. Therefore
omap_device_late_idle idled the device during probing causing oopses when
accessing the registers.

It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE
in the notifier callback. Therefore set od->_driver_status also in that
case.

This came apparent after commit 21b2cec61c04 ("mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this
oops:

omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver.  Idling
8<--- cut here ---
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c
...
(omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258)
(omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0)
(mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84)
(mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0)
(omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98)
(platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4)

Fixes: 04abaf07f6d5 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer")
Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
[tony@atomide.com: left out extra parens, trimmed description stack trace]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fanotify: Fix sys_fanotify_mark() on native x86-32

commit 2ca408d9c749c32288bc28725f9f12ba30299e8f upstream.

Commit

  121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")

converted native x86-32 which take 64-bit arguments to use the
compat handlers to allow conversion to passing args via pt_regs.
sys_fanotify_mark() was however missed, as it has a general compat
handler. Add a config option that will use the syscall wrapper that
takes the split args for native 32-bit.

 [ bp: Fix typo in Kconfig help text. ]

Fixes: 121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
Reported-by: Paweł Jasiak <pawel@jasiak.xyz>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Fix memory leakage caused by kfifo_alloc

commit 37309f47e2f5674f3e86cb765312ace42cfcedf5 upstream.

As reported by syzbot below, kfifo_alloc'd memory would not be freed
if a non-zero return value is triggered in wacom_probe. This patch
creates and uses devm_kfifo_alloc to allocate and free itself.

BUG: memory leak
unreferenced object 0xffff88810dc44a00 (size 512):
  comm "kworker/1:2", pid 3674, jiffies 4294943617 (age 14.100s)
  hex dump (first 32 bytes):
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
   [<0000000023e1afac>] kmalloc_array include/linux/slab.h:592 [inline]
   [<0000000023e1afac>] __kfifo_alloc+0xad/0x100 lib/kfifo.c:43
   [<00000000c477f737>] wacom_probe+0x1a1/0x3b0 drivers/hid/wacom_sys.c:2727
   [<00000000b3109aca>] hid_device_probe+0x16b/0x210 drivers/hid/hid-core.c:2281
   [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554
   [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
   [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
   [<00000000efb7c59e>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
   [<0000000024ab1590>] __device_attach+0x122/0x250 drivers/base/dd.c:912
   [<000000004c7ac048>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
   [<00000000b93050a3>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
   [<00000000e5b46ea5>] hid_add_device+0x151/0x390 drivers/hid/hid-core.c:2437
   [<00000000c6add147>] usbhid_probe+0x412/0x560 drivers/hid/usbhid/hid-core.c:1407
   [<00000000c33acdb4>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
   [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554
   [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
   [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844

https://syzkaller.appspot.com/bug?extid=5b49c9695968d7250a26

Reported-by: syzbot+5b49c9695968d7250a26@syzkaller.appspotmail.com
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ionic: start queues before announcing link up

commit 8f56bc4dc1011be6e2a53198b615fdc588b4ef6a upstream.

Change the order of operations in the link_up handling to be
sure that the queues are up and ready before we announce that
the link is up.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix variable 'vport' set but not used in lpfc_sli4_abts_err_handler()

commit 6998ff4e21619d47ebf4f5eb4cafa65c65856221 upstream.

Remove vport variable that is assigned but not used in
lpfc_sli4_abts_err_handler().

Link: https://lore.kernel.org/r/20201119203407.121913-1-james.smart@broadcom.com
Fixes: e7dab164a9aa ("scsi: lpfc: Fix scheduling call while in softirq context in lpfc_unreg_rpi")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Check if lag is supported before creating one

[ Upstream commit abf8ef953a43e74aac3c54a94975f21bd483199b ]

This patch fixes a memleak issue by preventing to create a lag and
add PFs if lag is not supported.

comm “python3”, pid 349349, jiffies 4296985507 (age 1446.976s)
hex dump (first 32 bytes):
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  …………….
  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  …………….
 backtrace:
  [<000000005b216ae7>] mlx5_lag_add+0x1d5/0×3f0 [mlx5_core]
  [<000000000445aa55>] mlx5e_nic_enable+0x66/0×1b0 [mlx5_core]
  [<00000000c56734c3>] mlx5e_attach_netdev+0x16e/0×200 [mlx5_core]
  [<0000000030439d1f>] mlx5e_attach+0x5c/0×90 [mlx5_core]
  [<0000000018fd8615>] mlx5e_add+0x1a4/0×410 [mlx5_core]
  [<0000000068bc504b>] mlx5_add_device+0x72/0×120 [mlx5_core]
  [<000000009fce51f9>] mlx5_register_device+0x77/0xb0 [mlx5_core]
  [<00000000d0d81ff3>] mlx5_load_one+0xc58/0×1eb0 [mlx5_core]
  [<0000000045077adc>] init_one+0x3ea/0×920 [mlx5_core]
  [<0000000043287674>] pci_device_probe+0xcd/0×150
  [<00000000dafd3279>] really_probe+0x1c9/0×4b0
  [<00000000f06bdd84>] driver_probe_device+0x5d/0×140
  [<00000000e3d508b6>] device_driver_attach+0x4f/0×60
  [<0000000084fba0f0>] bind_store+0xbf/0×120
  [<00000000bf6622b3>] kernfs_fop_write+0x114/0×1b0

Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: In skb build skip setting mark in switchdev mode

[ Upstream commit e13ed0ac064dd6ee964155ba9fdc2f3c3785934c ]

sop_drop_qpn field in the cqe is used by two features, in SWITCHDEV mode
to restore the chain id in case of a miss and in LEGACY mode to support
skbedit mark action. In build RX skb, the skb mark field is set regardless
of the configured mode which cause a corruption of the mark field in case
of switchdev mode.

Fix by overriding the mark value back to 0 in the representor tc update
skb flow.

Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: ethtool, Fix restriction of autoneg with 56G

[ Upstream commit b1c0aca3d3ddeebeec57ada9c2df9ed647939249 ]

Prior to this patch, configuring speed to 50G with autoneg off over
devices supporting 50G per lane failed.
Support for 50G per lane introduced a new set of link-modes, on which
driver always performed a speed validation as if only legacy link-modes
were configured. Fix driver speed validation to force setting autoneg
over 56G only if in legacy link-mode.

Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address

[ Upstream commit 0f2dcade69f2af56b74bce432e48ff3957830ce2 ]

In multi-port mode, FW reports syndrome 0x2ea48 (invalid vhca_port_number)
if the port_num is not 1 or 2.

Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE

[ Upstream commit 3545454c7801e391b0d966f82c98614d45394770 ]

Exclude RMII from modes that report 1 GbE support. Reduced MII supports
up to 100 MbE.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix L2 header access in qeth_l3_osa_features_check()

[ Upstream commit f9c4845385c8f6631ebd5dddfb019ea7a285fba4 ]

ip_finish_output_gso() may call .ndo_features_check() even before the
skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt
to inspect the L2 header via vlan_eth_hdr().

Switch to vlan_get_protocol(), as already used further down in the
common qeth_features_check() path.

Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix locking for discipline setup / removal

[ Upstream commit b41b554c1ee75070a14c02a88496b1f231c7eacc ]

Due to insufficient locking, qeth_core_set_online() and
qeth_dev_layer2_store() can run in parallel, both attempting to load &
setup the discipline (and stepping on each other toes along the way).
A similar race can also occur between qeth_core_remove_device() and
qeth_dev_layer2_store().

Access to .discipline is meant to be protected by the discipline_mutex,
so add/expand the locking in qeth_core_remove_device() and
qeth_core_set_online().
Adjust the locking in qeth_l*_remove_device() accordingly, as it's now
handled by the callers in a consistent manner.

Based on an initial patch by Ursula Braun.

Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix deadlock during recovery

[ Upstream commit 0b9902c1fcc59ba75268386c0420a554f8844168 ]

When qeth_dev_layer2_store() - holding the discipline_mutex - waits
inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete,
we can hit a deadlock if qeth_do_reset() concurrently calls
qeth_set_online() and thus tries to aquire the discipline_mutex.

Move the discipline_mutex locking outside of qeth_set_online() and
qeth_set_offline(), and turn the discipline into a parameter so that
callers understand the dependency.

To fix the deadlock, we can now relax the locking:
As already established, qeth_l*_remove_device() waits for
qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk
of having card->discipline ripped out while it's running, and thus
doesn't need to take the discipline_mutex.

Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nexthop: Bounce NHA_GATEWAY in FDB nexthop groups

[ Upstream commit b19218b27f3477316d296e8bcf4446aaf017aa69 ]

The function nh_check_attr_group() is called to validate nexthop groups.
The intention of that code seems to have been to bounce all attributes
above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all
these attributes except when NHA_FDB attribute is present--then it accepts
them.

NHA_FDB validation that takes place before, in rtm_to_nh_config(), already
bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further
back, NHA_GROUPS and NHA_MASTER are bounced unconditionally.

But that still leaves NHA_GATEWAY as an attribute that would be accepted in
FDB nexthop groups (with no meaning), so long as it keeps the address
family as unspecified:

 # ip nexthop add id 1 fdb via 127.0.0.1
 # ip nexthop add id 10 fdb via default group 1

The nexthop code is still relatively new and likely not used very broadly,
and the FDB bits are newer still. Even though there is a reproducer out
there, it relies on an improbable gateway arguments "via default", "via
all" or "via any". Given all this, I believe it is OK to reformulate the
condition to do the right thing and bounce NHA_GATEWAY.

Fixes: 38428d68719c ("nexthop: support for fdb ecmp nexthops")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nexthop: Unlink nexthop group entry in error path

[ Upstream commit 7b01e53eee6dce7a8a6736e06b99b68cd0cc7a27 ]

In case of error, remove the nexthop group entry from the list to which
it was previously added.

Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nexthop: Fix off-by-one error in error path

[ Upstream commit 07e61a979ca4dddb3661f59328b3cd109f6b0070 ]

A reference was not taken for the current nexthop entry, so do not try
to put it in the error path.

Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-af: fix memory leak of lmac and lmac->name

[ Upstream commit ac7996d680d8b4a51bb99bbdcee3dc838b985498 ]

Currently the error return paths don't kfree lmac and lmac->name
leading to some memory leaks.  Fix this by adding two error return
paths that kfree these objects

Addresses-Coverity: ("Resource leak")
Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chtls: Fix chtls resources release sequence

[ Upstream commit 15ef6b0e30b354253e2c10b3836bc59767eb162b ]

CPL_ABORT_RPL is sent after releasing the resources by calling
chtls_release_resources(sk); and chtls_conn_done(sk);
eventually causing kernel panic. Fixing it by calling release
in appropriate order.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chtls: Added a check to avoid NULL pointer dereference

[ Upstream commit eade1e0a4fb31d48eeb1589d9bb859ae4dd6181d ]

In case of server removal lookup_stid() may return NULL pointer, which
is used as listen_ctx. So added a check before accessing this pointer.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chtls: Replace skb_dequeue with skb_peek

[ Upstream commit a84b2c0d5fa23da6d6c8c0d5f5c93184a2744d3e ]

The skb is unlinked twice, one in __skb_dequeue in function
chtls_reset_synq() and another in cleanup_syn_rcv_conn().
So in this patch using skb_peek() instead of __skb_dequeue(),
so that unlink will be handled only in cleanup_syn_rcv_conn().

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chtls: Avoid unnecessary freeing of oreq pointer

[ Upstream commit f8d15d29d6e6b32704c8fce9229716ca145a0de2 ]

In chtls_pass_accept_request(), removing the chtls_reqsk_free()
call to avoid oreq freeing twice. Here oreq is the pointer to
struct request_sock.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chtls: Fix panic when route to peer not configured

[ Upstream commit 5a5fac9966bb6d513198634b0b1357be7e8447d2 ]

If route to peer is not configured, we might get non tls
devices from dst_neigh_lookup() which is invalid, adding a
check to avoid it.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chtls: Remove invalid set_tcb call

[ Upstream commit 827d329105bfde6701f0077e34a09c4a86e27145 ]

At the time of SYN_RECV, connection information is not
initialized at FW, updating tcb flag over uninitialized
connection causes adapter crash. We don't need to
update the flag during SYN_RECV state, so avoid this.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

chtls: Fix hardware tid leak

[ Upstream commit 717df0f4cdc9044c415431a3522b3e9ccca5b4a3 ]

send_abort_rpl() is not calculating cpl_abort_req_rss offset and
ends up sending wrong TID with abort_rpl WR causng tid leaks.
Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is
redundant.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ip: always refragment ip defragmented packets

[ Upstream commit bb4cc1a18856a73f0ff5137df0c2a31f4c50f6cf ]

Conntrack reassembly records the largest fragment size seen in IPCB.
However, when this gets forwarded/transmitted, fragmentation will only
be forced if one of the fragmented packets had the DF bit set.

In that case, a flag in IPCB will force fragmentation even if the
MTU is large enough.

This should work fine, but this breaks with ip tunnels.
Consider client that sends a UDP datagram of size X to another host.

The client fragments the datagram, so two packets, of size y and z, are
sent. DF bit is not set on any of these packets.

Middlebox netfilter reassembles those packets back to single size-X
packet, before routing decision.

packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit
isn't set.  At output time, ip refragmentation is skipped as well
because x is still smaller than the mtu of the output device.

If ttransmit device is an ip tunnel, the packet size increases to
x+overhead.

Also, tunnel might be configured to force DF bit on outer header.

In this case, packet will be dropped (exceeds MTU) and an ICMP error is
generated back to sender.

But sender already respects the announced MTU, all the packets that
it sent did fit the announced mtu.

Force refragmentation as per original sizes unconditionally so ip tunnel
will encapsulate the fragments instead.

The only other solution I see is to place ip refragmentation in
the ip_tunnel code to handle this case.

Fixes: d6b915e29f4ad ("ip_fragment: don't forward defragmented DF packet")
Reported-by: Christian Perle <christian.perle@secunet.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix pmtu check in nopmtudisc mode

[ Upstream commit 50c661670f6a3908c273503dfa206dfc7aa54c07 ]

For some reason ip_tunnel insist on setting the DF bit anyway when the
inner header has the DF bit set, EVEN if the tunnel was configured with
'nopmtudisc'.

This means that the script added in the previous commit
cannot be made to work by adding the 'nopmtudisc' flag to the
ip tunnel configuration. Doing so breaks connectivity even for the
without-conntrack/netfilter scenario.

When nopmtudisc is set, the tunnel will skip the mtu check, so no
icmp error is sent to client. Then, because inner header has DF set,
the outer header gets added with DF bit set as well.

IP stack then sends an error to itself because the packet exceeds
the device MTU.

Fixes: 23a3647bc4f93 ("ip_tunnels: Use skb-len to PMTU check.")
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: selftests: add test for changing routes with PTMU exceptions

[ Upstream commit 5316a7c0130acf09bfc8bb0092407006010fcccc ]

Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change.

These tests explicitly test for a recently discovered problem in the
IPv6 routing framework where PMTU exceptions were not properly released
when replacing a route via "ip route change ...".

After creating PMTU exceptions, the route from the device A to R1 will be
replaced with a new route, then device A will be deleted. If the PMTU
exceptions were properly cleaned up by the kernel, this device deletion
will succeed. Otherwise, the unregistration of the device will stall, and
messages such as the following will be logged in dmesg:

unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4

Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: fib: flush exceptions when purging route

[ Upstream commit d8f5c29653c3f6995e8979be5623d263e92f6b86 ]

Route removal is handled by two code paths. The main removal path is via
fib6_del_route() which will handle purging any PMTU exceptions from the
cache, removing all per-cpu copies of the DST entry used by the route, and
releasing the fib6_info struct.

The second removal location is during fib6_add_rt2node() during a route
replacement operation. This path also calls fib6_purge_rt() to handle
cleaning up the per-cpu copies of the DST entries and releasing the
fib6_info associated with the older route, but it does not flush any PMTU
exceptions that the older route had. Since the older route is removed from
the tree during the replacement, we lose any way of accessing it again.

As these lingering DSTs and the fib6_info struct are holding references to
the underlying netdevice struct as well, unregistering that device from the
kernel can never complete.

Fixes: 2b760fcf5cfb3 ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1609892546-11389-1-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptp: ptp_ines: prevent build when HAS_IOMEM is not set

[ Upstream commit 1f685e6adbbe3c7b1bd9053be771b898d9efa655 ]

ptp_ines.c uses devm_platform_ioremap_resource(), which is only
built/available when CONFIG_HAS_IOMEM is enabled.
CONFIG_HAS_IOMEM is not enabled for arch/s390/, so builds on S390
have a build error:

s390-linux-ld: drivers/ptp/ptp_ines.o: in function `ines_ptp_ctrl_probe':
ptp_ines.c:(.text+0x17e6): undefined reference to `devm_platform_ioremap_resource'

Prevent builds of ptp_ines.c when HAS_IOMEM is not set.

Fixes: bad1eaa6ac31 ("ptp: Add a driver for InES time stamping IP core.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202101031125.ZEFCUiKi-lkp@intel.com
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20210106042531.1351-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bareudp: add missing error handling for bareudp_link_config()

[ Upstream commit 94bcfdbff0c210b17b27615f4952cc6ece7d5f5f ]

.dellink does not get called after .newlink fails,
bareudp_newlink() must undo what bareudp_configure()
has done if bareudp_link_config() fails.

v2: call bareudp_dellink(), like bareudp_dev_create() does

Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Link: https://lore.kernel.org/r/20210105190725.1736246-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Fix some resource leaks in error handling paths

[ Upstream commit 0f7ba7bc46fa0b574ccacf5672991b321e028492 ]

A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors().

This is correctly freed in the remove function, but not in the error
handling path of the probe function. Fix this by adding the missing
dma_free_coherent() call.

While at it, rename a label in order to be slightly more informative.

Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Chris Zankel <chris@zankel.net>
References: commit 10e3cc180e64 ("net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'")
Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: vlan: avoid leaks on register_vlan_dev() failures

[ Upstream commit 55b7ab1178cbf41f979ff83236d3321ad35ed2ad ]

VLAN checks for NETREG_UNINITIALIZED to distinguish between
registration failure and unregistration in progress.

Since commit cb626bf566eb ("net-sysfs: Fix reference count leak")
registration failure may, however, result in NETREG_UNREGISTERED
as well as NETREG_UNINITIALIZED.

This fix is similer to cebb69754f37 ("rtnetlink: Fix
memory(net_device) leak when ->newlink fails")

Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-sun8i: Balance syscon (de)initialization

[ Upstream commit 9b1e39cf5dd81f33186cdb950fcf75a121f1a9a7 ]

Previously, sun8i_dwmac_set_syscon was called from a chain of functions
in several different files:
    sun8i_dwmac_probe
      stmmac_dvr_probe
        stmmac_hw_init
          stmmac_hwif_init
            sun8i_dwmac_setup
              sun8i_dwmac_set_syscon
which made the lifetime of the syscon values hard to reason about. Part
of the problem is that there is no similar platform driver callback from
stmmac_dvr_remove. As a result, the driver unset the syscon value in
sun8i_dwmac_exit, but this leaves it uninitialized after a suspend/
resume cycle. It was also unset a second time (outside sun8i_dwmac_exit)
in the probe error path.

Move the init to the earliest available place in sun8i_dwmac_probe
(after stmmac_probe_config_dt, which initializes plat_dat), and the
deinit to the corresponding position in the cleanup order.

Since priv is not filled in until stmmac_dvr_probe, this requires
changing the sun8i_dwmac_set_syscon parameters to priv's two relevant
members.

Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-sun8i: Balance internal PHY power

[ Upstream commit b8239638853e3e37b287e4bd4d57b41f14c78550 ]

sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but
sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This
caused PHY power to remain off after a suspend/resume cycle. Fix this by
recording if PHY power should be restored, and if so, restoring it.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-sun8i: Balance internal PHY resource references

[ Upstream commit 529254216773acd5039c07aa18cf06fd1f9fccdd ]

While stmmac_pltfr_remove calls sun8i_dwmac_exit, the sun8i_dwmac_init
and sun8i_dwmac_exit functions are also called by the stmmac_platform
suspend/resume callbacks. They may be called many times during the
device's lifetime and should not release resources used by the driver.

Furthermore, there was no error handling in case registering the MDIO
mux failed during probe, and the EPHY clock was never released at all.

Fix all of these issues by moving the deinitialization code to a driver
removal callback. Also ensure the EPHY is powered down before removal.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-sun8i: Fix probe error handling

[ Upstream commit 7eeecc4b1f480c7ba1932cb9a7693f8c452640f2 ]

stmmac_pltfr_remove does three things in one function, making it
inapproprate for unwinding the steps in the probe function. Currently,
a failure before the call to stmmac_dvr_probe would leak OF node
references due to missing a call to stmmac_remove_config_dt. And an
error in stmmac_dvr_probe would cause the driver to attempt to remove a
netdevice that was never added. Fix these by reordering the init and
splitting out the error handling steps.

Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Fixes: 40a1dcee2d18 ("net: ethernet: dwmac-sun8i: Use the correct function in exit path")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: fix a phy loopback fail issue

[ Upstream commit f04bbcbf1e38d192e94bbfa126731a52332c40b1 ]

When phy driver does not implement the set_loopback interface,
phy loopback test will return -EOPNOTSUPP, and the loopback test
will fail. So when phy driver does not implement the set_loopback
interface, don't do phy loopback test.

Fixes: c9765a89d142 ("net: hns3: add phy selftest function")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: fix the number of queues actually used by ARQ

[ Upstream commit 65e61e3c2a619c4d4b873885b2d5394025ed117b ]

HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number
of queues used by ARQ(Asynchronous Receive Queue), so the head
and tail pointers should also use this macro.

Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: fix incorrect handling of sctp6 rss tuple

[ Upstream commit ab6e32d2913a594bc8f822ce4a75c400190b2ecc ]

For DEVICE_VERSION_V2, the hardware only supports src-ip,
dst-ip and verification-tag for rss tuple set of sctp6
packet. For DEVICE_VERSION_V3, the hardware supports
src-port and dst-port as well.

Currently, when user queries the sctp6 rss tuples info,
some unsupported information will be showed on V2. So add
a check for hardware version when initializing and queries
sctp6 rss tuple to fix this issue.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: cdc_ncm: correct overhead in delayed_ndp_size

[ Upstream commit 7a68d725e4ea384977445e0bcaed3d7de83ab5b3 ]

Aligning to tx_ndp_modulus is not sufficient because the next align
call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus +
ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes
on a Huawei 909s-120 LTE module as follows:

- the condition marked /* if there is a remaining skb [...] */ is true
  so the swaps happen
- skb_out is set from ctx->tx_curr_skb
- skb_out->len is exactly 0x3f52
- ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac
  (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe)
- the for loop over n is executed once
- the cdc_ncm_align_tail call marked /* align beginning of next frame */
  increases skb_out->len to 0x3f56 (the sum is now 0x4002)
- the condition marked /* check if we had enough room left [...] */ is
  false so we break out of the loop
- the condition marked /* If requested, put NDP at end of frame. */ is
  true so the NDP is written into skb_out
- now skb_out->len is 0x4002, so padding_count is minus two interpreted
  as an unsigned number, which is used as the length argument to memset,
  leading to a crash with various symptoms but usually including

> Call Trace:
>  <IRQ>
>  cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm]
>  cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim]
>  usbnet_start_xmit+0x5d/0x720 [usbnet]

The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus
boundary (adding at most ctx->tx_modulus-1 bytes), then adds
ctx->tx_remainder bytes. Alternatively, the next alignment call can
occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most
ctx->tx_ndp_modulus-1 bytes are added.

A similar problem has occurred before, and the code is nontrivial to
reason about, so add a guard before the crashing call. By that time it
is too late to prevent any memory corruption (we'll have written past
the end of the buffer already) but we can at least try to get a warning
written into an on-disk log by avoiding the hard crash caused by padding
past the buffer with a huge number of zeros.

Signed-off-by: Jouni K. Seppänen <jks@iki.fi>
Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: shrink delalloc pages instead of full inodes

[ Upstream commit e076ab2a2ca70a0270232067cd49f76cd92efe64 ]

Commit 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in
shrink_delalloc") cleaned up how we do delalloc shrinking by utilizing
some infrastructure we have in place to flush inodes that we use for
device replace and snapshot.  However this introduced a pretty serious
performance regression.  To reproduce the user untarred the source
tarball of Firefox (360MiB xz compressed/1.5GiB uncompressed), and would
see it take anywhere from 5 to 20 times as long to untar in 5.10
compared to 5.9. This was observed on fast devices (SSD and better) and
not on HDD.

The root cause is because before we would generally use the normal
writeback path to reclaim delalloc space, and for this we would provide
it with the number of pages we wanted to flush.  The referenced commit
changed this to flush that many inodes, which drastically increased the
amount of space we were flushing in certain cases, which severely
affected performance.

We cannot revert this patch unfortunately because of 3d45f221ce62
("btrfs: fix deadlock when cloning inline extent and low on free
metadata space") which requires the ability to skip flushing inodes that
are being cloned in certain scenarios, which means we need to keep using
our flushing infrastructure or risk re-introducing the deadlock.

Instead to fix this problem we can go back to providing
btrfs_start_delalloc_roots with a number of pages to flush, and then set
up a writeback_control and utilize sync_inode() to handle the flushing
for us.  This gives us the same behavior we had prior to the fix, while
still allowing us to avoid the deadlock that was fixed by Filipe.  I
redid the users original test and got the following results on one of
our test machines (256GiB of ram, 56 cores, 2TiB Intel NVMe drive)

  5.9 0m54.258s
  5.10 1m26.212s
  5.10+patch 0m38.800s

5.10+patch is significantly faster than plain 5.9 because of my patch
series "Change data reservations to use the ticketing infra" which
contained the patch that introduced the regression, but generally
improved the overall ENOSPC flushing mechanisms.

Additional testing on consumer-grade SSD (8GiB ram, 8 CPU) confirm
the results:

  5.10.5            4m00s
  5.10.5+patch      1m08s
  5.11-rc2     5m14s
  5.11-rc2+patch    1m30s

Reported-by: René Rebe <rene@exactcode.de>
Fixes: 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc")
CC: stable@vger.kernel.org # 5.10
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: David Sterba <dsterba@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add my test results ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix deadlock when cloning inline extent and low on free metadata space

[ Upstream commit 3d45f221ce627d13e2e6ef3274f06750c84a6542 ]

When cloning an inline extent there are cases where we can not just copy
the inline extent from the source range to the target range (e.g. when the
target range starts at an offset greater than zero). In such cases we copy
the inline extent's data into a page of the destination inode and then
dirty that page. However, after that we will need to start a transaction
for each processed extent and, if we are ever low on available metadata
space, we may need to flush existing delalloc for all dirty inodes in an
attempt to release metadata space - if that happens we may deadlock:

* the async reclaim task queued a delalloc work to flush delalloc for
  the destination inode of the clone operation;

* the task executing that delalloc work gets blocked waiting for the
  range with the dirty page to be unlocked, which is currently locked
  by the task doing the clone operation;

* the async reclaim task blocks waiting for the delalloc work to complete;

* the cloning task is waiting on the waitqueue of its reservation ticket
  while holding the range with the dirty page locked in the inode's
  io_tree;

* if metadata space is not released by some other task (like delalloc for
  some other inode completing for example), the clone task waits forever
  and as a consequence the delalloc work and async reclaim tasks will hang
  forever as well. Releasing more space on the other hand may require
  starting a transaction, which will hang as well when trying to reserve
  metadata space, resulting in a deadlock between all these tasks.

When this happens, traces like the following show up in dmesg/syslog:

  [87452.323003] INFO: task kworker/u16:11:1810830 blocked for more than 120 seconds.
  [87452.323644]       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  [87452.324248] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [87452.324852] task:kworker/u16:11  state:D stack:    0 pid:1810830 ppid:     2 flags:0x00004000
  [87452.325520] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
  [87452.326136] Call Trace:
  [87452.326737]  __schedule+0x5d1/0xcf0
  [87452.327390]  schedule+0x45/0xe0
  [87452.328174]  lock_extent_bits+0x1e6/0x2d0 [btrfs]
  [87452.328894]  ? finish_wait+0x90/0x90
  [87452.329474]  btrfs_invalidatepage+0x32c/0x390 [btrfs]
  [87452.330133]  ? __mod_memcg_state+0x8e/0x160
  [87452.330738]  __extent_writepage+0x2d4/0x400 [btrfs]
  [87452.331405]  extent_write_cache_pages+0x2b2/0x500 [btrfs]
  [87452.332007]  ? lock_release+0x20e/0x4c0
  [87452.332557]  ? trace_hardirqs_on+0x1b/0xf0
  [87452.333127]  extent_writepages+0x43/0x90 [btrfs]
  [87452.333653]  ? lock_acquire+0x1a3/0x490
  [87452.334177]  do_writepages+0x43/0xe0
  [87452.334699]  ? __filemap_fdatawrite_range+0xa4/0x100
  [87452.335720]  __filemap_fdatawrite_range+0xc5/0x100
  [87452.336500]  btrfs_run_delalloc_work+0x17/0x40 [btrfs]
  [87452.337216]  btrfs_work_helper+0xf1/0x600 [btrfs]
  [87452.337838]  process_one_work+0x24e/0x5e0
  [87452.338437]  worker_thread+0x50/0x3b0
  [87452.339137]  ? process_one_work+0x5e0/0x5e0
  [87452.339884]  kthread+0x153/0x170
  [87452.340507]  ? kthread_mod_delayed_work+0xc0/0xc0
  [87452.341153]  ret_from_fork+0x22/0x30
  [87452.341806] INFO: task kworker/u16:1:2426217 blocked for more than 120 seconds.
  [87452.342487]       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  [87452.343274] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [87452.344049] task:kworker/u16:1   state:D stack:    0 pid:2426217 ppid:     2 flags:0x00004000
  [87452.344974] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
  [87452.345655] Call Trace:
  [87452.346305]  __schedule+0x5d1/0xcf0
  [87452.346947]  ? kvm_clock_read+0x14/0x30
  [87452.347676]  ? wait_for_completion+0x81/0x110
  [87452.348389]  schedule+0x45/0xe0
  [87452.349077]  schedule_timeout+0x30c/0x580
  [87452.349718]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [87452.350340]  ? lock_acquire+0x1a3/0x490
  [87452.351006]  ? try_to_wake_up+0x7a/0xa20
  [87452.351541]  ? lock_release+0x20e/0x4c0
  [87452.352040]  ? lock_acquired+0x199/0x490
  [87452.352517]  ? wait_for_completion+0x81/0x110
  [87452.353000]  wait_for_completion+0xab/0x110
  [87452.353490]  start_delalloc_inodes+0x2af/0x390 [btrfs]
  [87452.353973]  btrfs_start_delalloc_roots+0x12d/0x250 [btrfs]
  [87452.354455]  flush_space+0x24f/0x660 [btrfs]
  [87452.355063]  btrfs_async_reclaim_metadata_space+0x1bb/0x480 [btrfs]
  [87452.355565]  process_one_work+0x24e/0x5e0
  [87452.356024]  worker_thread+0x20f/0x3b0
  [87452.356487]  ? process_one_work+0x5e0/0x5e0
  [87452.356973]  kthread+0x153/0x170
  [87452.357434]  ? kthread_mod_delayed_work+0xc0/0xc0
  [87452.357880]  ret_from_fork+0x22/0x30
  (...)
  < stack traces of several tasks waiting for the locks of the inodes of the
    clone operation >
  (...)
  [92867.444138] RSP: 002b:00007ffc3371bbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000052
  [92867.444624] RAX: ffffffffffffffda RBX: 00007ffc3371bea0 RCX: 00007f61efe73f97
  [92867.445116] RDX: 0000000000000000 RSI: 0000560fbd5d7a40 RDI: 0000560fbd5d8960
  [92867.445595] RBP: 00007ffc3371beb0 R08: 0000000000000001 R09: 0000000000000003
  [92867.446070] R10: 00007ffc3371b996 R11: 0000000000000246 R12: 0000000000000000
  [92867.446820] R13: 000000000000001f R14: 00007ffc3371bea0 R15: 00007ffc3371beb0
  [92867.447361] task:fsstress        state:D stack:    0 pid:2508238 ppid:2508153 flags:0x00004000
  [92867.447920] Call Trace:
  [92867.448435]  __schedule+0x5d1/0xcf0
  [92867.448934]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [92867.449423]  schedule+0x45/0xe0
  [92867.449916]  __reserve_bytes+0x4a4/0xb10 [btrfs]
  [92867.450576]  ? finish_wait+0x90/0x90
  [92867.451202]  btrfs_reserve_metadata_bytes+0x29/0x190 [btrfs]
  [92867.451815]  btrfs_block_rsv_add+0x1f/0x50 [btrfs]
  [92867.452412]  start_transaction+0x2d1/0x760 [btrfs]
  [92867.453216]  clone_copy_inline_extent+0x333/0x490 [btrfs]
  [92867.453848]  ? lock_release+0x20e/0x4c0
  [92867.454539]  ? btrfs_search_slot+0x9a7/0xc30 [btrfs]
  [92867.455218]  btrfs_clone+0x569/0x7e0 [btrfs]
  [92867.455952]  btrfs_clone_files+0xf6/0x150 [btrfs]
  [92867.456588]  btrfs_remap_file_range+0x324/0x3d0 [btrfs]
  [92867.457213]  do_clone_file_range+0xd4/0x1f0
  [92867.457828]  vfs_clone_file_range+0x4d/0x230
  [92867.458355]  ? lock_release+0x20e/0x4c0
  [92867.458890]  ioctl_file_clone+0x8f/0xc0
  [92867.459377]  do_vfs_ioctl+0x342/0x750
  [92867.459913]  __x64_sys_ioctl+0x62/0xb0
  [92867.460377]  do_syscall_64+0x33/0x80
  [92867.460842]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  (...)
  < stack traces of more tasks blocked on metadata reservation like the clone
    task above, because the async reclaim task has deadlocked >
  (...)

Another thing to notice is that the worker task that is deadlocked when
trying to flush the destination inode of the clone operation is at
btrfs_invalidatepage(). This is simply because the clone operation has a
destination offset greater than the i_size and we only update the i_size
of the destination file after cloning an extent (just like we do in the
buffered write path).

Since the async reclaim path uses btrfs_start_delalloc_roots() to trigger
the flushing of delalloc for all inodes that have delalloc, add a runtime
flag to an inode to signal it should not be flushed, and for inodes with
that flag set, start_delalloc_inodes() will simply skip them. When the
cloning code needs to dirty a page to copy an inline extent, set that flag
on the inode and then clear it when the clone operation finishes.

This could be sporadically triggered with test case generic/269 from
fstests, which exercises many fsstress processes running in parallel with
several dd processes filling up the entire filesystem.

CC: stable@vger.kernel.org # 5.9+
Fixes: 05a5a7621ce6 ("Btrfs: implement full reflink support for inline extents")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: skip unnecessary searches for xattrs when logging an inode

[ Upstream commit f2f121ab500d0457cc9c6f54269d21ffdf5bd304 ]

Every time we log an inode we lookup in the fs/subvol tree for xattrs and
if we have any, log them into the log tree. However it is very common to
have inodes without any xattrs, so doing the search wastes times, but more
importantly it adds contention on the fs/subvol tree locks, either making
the logging code block and wait for tree locks or making the logging code
making other concurrent operations block and wait.

The most typical use cases where xattrs are used are when capabilities or
ACLs are defined for an inode, or when SELinux is enabled.

This change makes the logging code detect when an inode does not have
xattrs and skip the xattrs search the next time the inode is logged,
unless the inode is evicted and loaded again or a xattr is added to the
inode. Therefore skipping the search for xattrs on inodes that don't ever
have xattrs and are fsynced with some frequency.

The following script that calls dbench was used to measure the impact of
this change on a VM with 8 CPUs, 16Gb of ram, using a raw NVMe device
directly (no intermediary filesystem on the host) and using a non-debug
kernel (default configuration on Debian distributions):

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdk
  MNT=/mnt/sdk
  MOUNT_OPTIONS="-o ssd"

  mkfs.btrfs -f -m single -d single $DEV
  mount $MOUNT_OPTIONS $DEV $MNT

  dbench -D $MNT -t 200 40

  umount $MNT

The results before this change:

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    5761605     0.172   312.057
 Close        4232452     0.002    10.927
 Rename        243937     1.406   277.344
 Unlink       1163456     0.631   298.402
 Deltree          160    11.581   221.107
 Mkdir             80     0.003     0.005
 Qpathinfo    5221410     0.065   122.309
 Qfileinfo     915432     0.001     3.333
 Qfsinfo       957555     0.003     3.992
 Sfileinfo     469244     0.023    20.494
 Find         2018865     0.448   123.659
 WriteX       2874851     0.049   118.529
 ReadX        9030579     0.004    21.654
 LockX          18754     0.003     4.423
 UnlockX        18754     0.002     0.331
 Flush         403792    10.944   359.494

Throughput 908.444 MB/sec  40 clients  40 procs  max_latency=359.500 ms

The results after this change:

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    6442521     0.159   230.693
 Close        4732357     0.002    10.972
 Rename        272809     1.293   227.398
 Unlink       1301059     0.563   218.500
 Deltree          160     7.796    54.887
 Mkdir             80     0.008     0.478
 Qpathinfo    5839452     0.047   124.330
 Qfileinfo    1023199     0.001     4.996
 Qfsinfo      1070760     0.003     5.709
 Sfileinfo     524790     0.033    21.765
 Find         2257658     0.314   125.611
 WriteX       3211520     0.040   232.135
 ReadX        10098969     0.004    25.340
 LockX          20974     0.003     1.569
 UnlockX        20974     0.002     3.475
 Flush         451553    10.287   331.037

Throughput 1011.77 MB/sec  40 clients  40 procs  max_latency=331.045 ms

+10.8% throughput, -8.2% max latency

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix -Wsometimes-uninitialized warning

[ Upstream commit 4c60244dc37262023d24b167e245055c06bc0b77 ]

clang complains about a possible code path in which a variable is used
without an initialization:

drivers/scsi/ufs/ufshcd.c:7690:3: error: variable 'sdp' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
                BUG_ON(1);
                ^~~~~~~~~
include/asm-generic/bug.h:63:36: note: expanded from macro 'BUG_ON'
 #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                   ^~~~~~~~~~~~~~~~~~~

Turn the BUG_ON(1) into an unconditional BUG() that makes it clear to clang
that this code path is never hit.

Link: https://lore.kernel.org/r/20201203223137.1205933-1-arnd@kernel.org
Fixes: 4f3e900b6282 ("scsi: ufs: Clear UAC for FFU and RPMB LUNs")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: Fix return value from alloc_fixed_file_ref_node

[ Upstream commit 3e2224c5867fead6c0b94b84727cc676ac6353a3 ]

alloc_fixed_file_ref_node() currently returns an ERR_PTR on failure.
io_sqe_files_unregister() expects it to return NULL and since it can only
return -ENOMEM, it makes more sense to change alloc_fixed_file_ref_node()
to behave that way.

Fixes: 1ffc54220c44 ("io_uring: fix io_sqe_files_unregister() hangs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panfrost: Don't corrupt the queue mutex on open/close

[ Upstream commit a17d609e3e216c406f7c0cec2a94086a4401ac06 ]

The mutex within the panfrost_queue_state should have the lifetime of
the queue, however it was erroneously initialised/destroyed during
panfrost_job_{open,close} which is called every time a client
opens/closes the drm node.

Move the initialisation/destruction to panfrost_job_{init,fini} where it
belongs.

Fixes: 1a11a88cfd9a ("drm/panfrost: Fix job timeout handling")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029170047.30564-1-steven.price@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context

[ Upstream commit aded8c7c2b72f846a07a2c736b8e75bb8cf50a87 ]

On SM8150 it's occasionally observed that the boot hangs in between the
writing of SMEs and context banks in arm_smmu_device_reset().

The problem seems to coincide with a display refresh happening after
updating the stream mapping, but before clearing - and there by
disabling translation - the context bank picked to emulate translation
bypass.

Resolve this by explicitly disabling the bypass context already in
cfg_probe.

Fixes: f9081b8ff593 ("iommu/arm-smmu-qcom: Implement S2CR quirk")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210106005038.4152731-1-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Avoid filling sl in high 3 bits of vlan_id

[ Upstream commit 94a8c4dfcdb2b4fcb3dfafc39c1033a0b4637c86 ]

Only the low 12 bits of vlan_id is valid, and service level has been
filled in Address Vector. So there is no need to fill sl in vlan_id in
Address Vector.

Fixes: 7406c0036f85 ("RDMA/hns: Only record vlan info for HIP08")
Link: https://lore.kernel.org/r/1607650657-35992-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: patch up IOPOLL overflow_flush sync

commit 6c503150ae33ee19036255cfda0998463613352c upstream

IOPOLL skips completion locking but keeps it under uring_lock, thus
io_cqring_overflow_flush() and so io_cqring_events() need additional
locking with uring_lock in some cases for IOPOLL.

Remove __io_cqring_overflow_flush() from io_cqring_events(), introduce a
wrapper around flush doing needed synchronisation and call it by hand.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: limit {io|sq}poll submit locking scope

commit 89448c47b8452b67c146dc6cad6f737e004c5caf upstream

We don't need to take uring_lock for SQPOLL|IOPOLL to do
io_cqring_overflow_flush() when cq_overflow_list is empty, remove it
from the hot path.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: synchronise IOPOLL on task_submit fail

commit 81b6d05ccad4f3d8a9dfb091fb46ad6978ee40e4 upstream

io_req_task_submit() might be called for IOPOLL, do the fail path under
uring_lock to comply with IOPOLL synchronisation based solely on it.

Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/32s: Fix RTAS machine check with VMAP stack

[ Upstream commit 98bf2d3f4970179c702ef64db658e0553bc6ef3a ]

When we have VMAP stack, exception prolog 1 sets r1, not r11.

When it is not an RTAS machine check, don't trash r1 because it is
needed by prolog 1.

Fixes: da7bb43ab9da ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU")
Fixes: d2e006036082 ("powerpc/32: Use SPRN_SPRG_SCRATCH2 in exception prologs")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Squash in fixup for RTAS machine check from Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bc77d61d1c18940e456a2dee464f1e2eda65a3f0.1608621048.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.7

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20210111161510.602817176@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: Fix XCOPY NAA identifier lookup

commit 2896c93811e39d63a4d9b63ccf12a8fbc226e5e4 upstream.

When attempting to match EXTENDED COPY CSCD descriptors with corresponding
se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's
global devices list which includes all configured backstores.

This change ensures that only initiator-accessible backstores are
considered during CSCD descriptor lookup, according to the session's
se_node_acl LUN list.

To avoid LUN removal race conditions, device pinning is changed from being
configfs based to instead using the se_node_acl lun_ref.

Reference: CVE-2020-28374
Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rise completion at the last step of firmware callback

commit 4dfde294b9792dcf8615b55c58f093d544f472f0 upstream.

request_firmware_nowait() which schedules another work is used to load
firmware when USB is probing. If USB is unplugged before running the
firmware work, it goes disconnect ops, and then causes use-after-free.
Though we wait for completion of firmware work before freeing the hw,
firmware callback rises completion too early. So I move it to the
last step.

usb 5-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
rtlwifi: Selected firmware is not available
==================================================================
BUG: KASAN: use-after-free in rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93
Write of size 4 at addr ffff8881454cff50 by task kworker/0:6/7379

CPU: 0 PID: 7379 Comm: kworker/0:6 Not tainted 5.10.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events request_firmware_work_func
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
 __kasan_report mm/kasan/report.c:545 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
 rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93
 request_firmware_work_func+0x12c/0x230 drivers/base/firmware_loader/main.c:1079
 process_one_work+0x933/0x1520 kernel/workqueue.c:2272
 worker_thread+0x64c/0x1120 kernel/workqueue.c:2418
 kthread+0x38c/0x460 kernel/kthread.c:292
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296

The buggy address belongs to the page:
page:00000000f54435b3 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1454cf
flags: 0x200000000000000()
raw: 0200000000000000 0000000000000000 ffffea00051533c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881454cfe00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8881454cfe80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff8881454cff00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                                 ^
 ffff8881454cff80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8881454d0000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Reported-by: syzbot+65be4277f3c489293939@syzkaller.appspotmail.com
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214053106.7748-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Fix memory leak for failed bind

commit 8bee683384087a6275c9183a483435225f7bb209 upstream.

Fix a possible memory leak when a bind of an AF_XDP socket fails. When
the fill and completion rings are created, they are tied to the
socket. But when the buffer pool is later created at bind time, the
ownership of these two rings are transferred to the buffer pool as
they might be shared between sockets (and the buffer pool cannot be
created until we know what we are binding to). So, before the buffer
pool is created, these two rings are cleaned up with the socket, and
after they have been transferred they are cleaned up together with
the buffer pool.

The problem is that ownership was transferred before it was absolutely
certain that the buffer pool could be created and initialized
correctly and when one of these errors occurred, the fill and
completion rings did neither belong to the socket nor the pool and
where therefore leaked. Solve this by moving the ownership transfer
to the point where the buffer pool has been completely set up and
there is no way it can fail.

Fixes: 7361f9c3d719 ("xsk: Move fill and completion rings to buffer pool")
Reported-by: syzbot+cfa88ddd0655afa88763@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201214085127.3960-1-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix shift out of bounds reported by UBSAN

commit 2f80d502d627f30257ba7e3655e71c373b7d1a5a upstream.

Since we know that e >= s, we can reassociate the left shift,
changing the shifted number from 1 to 2 in exchange for
decreasing the right hand side by 1.

Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mtrr: Correct the range check before performing MTRR type lookups

commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream.

In mtrr_type_lookup(), if the input memory address region is not in the
MTRR, over 4GB, and not over the top of memory, a write-back attribute
is returned. These condition checks are for ensuring the input memory
address region is actually mapped to the physical memory.

However, if the end address is just aligned with the top of memory,
the condition check treats the address is over the top of memory, and
write-back attribute is not returned.

And this hits in a real use case with NVDIMM: the nd_pmem module tries
to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a
NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes
very low since it is aligned with the top of memory and its memory type
is uncached-minus.

Move the input end address change to inclusive up into
mtrr_type_lookup(), before checking for the top of memory in either
mtrr_type_lookup_{variable,fixed}() helpers.

 [ bp: Massage commit message. ]

Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()")
Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: idxd: off by one in cleanup code

commit ff58f7dd0c1352a01de3a40327895bd51e03de3a upstream.

The clean up is off by one so this will start at "i" and it should start
with "i - 1" and then it doesn't unregister the zeroeth elements in the
array.

Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/X9nFeojulsNqUSnG@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>