Evoke Zhang [Thu, 21 Jun 2018 10:05:15 +0000 (18:05 +0800)]
g12b: dts: update specified panel support for basic board [2/2]
PD#165090: g12b: dts: update specified panel support for basic board
Change-Id: Id26c312f5fabbdb8221e9cb2a0a2824cfd07c13b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
xingwei.zhou [Fri, 22 Jun 2018 08:41:34 +0000 (16:41 +0800)]
NANOQ: add nanoq reg in dts config
PD#165090: NANOQ: nanoq reg for sram and size
Change-Id: I29a9a698383c02ed527f3dc2b2cd5b03cf8dee53
Signed-off-by: xingwei.zhou <xingwei.zhou@amlogic.com>
Xingyu Chen [Wed, 20 Jun 2018 09:25:40 +0000 (17:25 +0800)]
keypad: add gpio and adc keypad support
PD#165090: keypad: add gpio and adc keypad support
Change-Id: Icf4ea20d8523eefa76abf70b8b844922ab1ca43e
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Hong Guo [Wed, 30 May 2018 02:07:33 +0000 (10:07 +0800)]
CPUFREQ: modify cpufreq driver.
PD#165090: cpufreq: modify cpufreq driver.
Change-Id: I8583acfd74a52629e40b39d5e53ea8b30a6b28e1
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Brian Zhu [Tue, 19 Jun 2018 18:57:41 +0000 (02:57 +0800)]
isp: add isp_sc dts config
PD#165090: isp: add isp_sc dts config
Change-Id: Ia03722bbbccf71c6b404395dabe4a3c89b299bf2
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Shunzhou Jiang [Mon, 11 Jun 2018 04:08:22 +0000 (12:08 +0800)]
clk: clock: compatible clk count for different platform [1/1]
PD#165090: clock: fix clk count error
Change-Id: I3b7c181e159b2a028ddc53e7c72066ec3633fd75
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Nian Jing [Tue, 12 Jun 2018 11:59:44 +0000 (19:59 +0800)]
cvbs: adjust output amplitude
PD#165090: cvbs
Change-Id: I031cbb04bb380e53bef6e5a8928244dcfbe25877
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Jiacheng Mei [Fri, 15 Jun 2018 13:00:48 +0000 (21:00 +0800)]
dts: expand isp cma and mv pinmux to dts
PD#165090: 1.expand isp cma to 256M
2.mv clk12_24_z_pins from dtsi to dts
Change-Id: I3b17ee594967ea95e28bb2edc9d8eaaf7d8349dd
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
Jiacheng Mei [Thu, 7 Jun 2018 09:06:23 +0000 (17:06 +0800)]
dts: add isp & mipi dts
PD#165090: add isp & mipi dts
Change-Id: I98a46f48ddd62db40350f8717961c047b5230410
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
Larson Jiang [Fri, 15 Jun 2018 03:17:41 +0000 (11:17 +0800)]
dts: g12b: enable wifi
PD#165090: enable wifi
Change-Id: I1f769540c40602dff3c56811a10249684792f046
Signed-off-by: Larson Jiang <larson.jiang@amlogic.com>
pengcheng chen [Mon, 11 Jun 2018 05:50:30 +0000 (13:50 +0800)]
osd: add mali-afbc decode error statistics
PD#165090: osd: add mali-afbc decode error statistics
Change-Id: Idb3c37944d3a0ac48422ab901416279fc458b00b
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Jian Hu [Wed, 6 Jun 2018 13:16:04 +0000 (21:16 +0800)]
pinctrl: add clk12_24 pin mux
PD#165090: pinctrl: add clk12_24 pin mux
Change-Id: Ia1226fd74449b0317dd57018188d50b06cfa6a69
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Larson Jiang [Wed, 13 Jun 2018 07:40:48 +0000 (15:40 +0800)]
wifi/bt: enable wifi
PD#165090: enable wifi for g12b
Change-Id: I067b4ba84e0d40d2332059adc988495072a75d84
Signed-off-by: Larson Jiang <larson.jiang@amlogic.com>
Jian Hu [Wed, 6 Jun 2018 09:23:44 +0000 (17:23 +0800)]
clk: add gpio 12m and 24m for g12a/b
PD#165090: clk: add gpio 12m and 24m for g12a/b
Change-Id: I2a3e8ed2f318eb13375415939d6216b0f30103a3
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Zongdong Jiao [Tue, 12 Jun 2018 02:34:38 +0000 (10:34 +0800)]
hdmitx: optimize hpll suspend
PD#165090: hdmitx: optimize hpll suspend
The BIT definition of RESET / ENABLE in G12A is different from
earlier chips.
HPLL suspend workflow:
1. set RESET as 1
2. delay 50us
3. set ENABLE as 0
Resume workflow is inverse, but no need anymore, it will be set
in set_disp_mode_auto().
Change-Id: Iefc7f7f026562f566c8a40325c74a53f46465b02
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
jianxin.pan [Wed, 6 Jun 2018 12:04:56 +0000 (20:04 +0800)]
schedutil: limit up/down init rate
PD#165090: schedutil: limit up/down min rate
Change-Id: Ib3aa6653d56056298df05bdede2e2bf6aea46882
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
zhilei.wu [Thu, 7 Jun 2018 11:10:14 +0000 (19:10 +0800)]
ge2d: enhanced hsc adv num
PD#165090: ge2d: enhanced hsc adv num
Change-Id: Ib4026d6883e70ddf38ab4d093fd37827b98f6c5e
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Jiyu Yang [Wed, 6 Jun 2018 13:20:34 +0000 (21:20 +0800)]
gdc: add gdc driver
PD#165090: gdc add platform drivers base on the arm release.
TODO use v4l2 m2m device driver rewrite.
Change-Id: I1943f762041d005c17abd9b803b69ef68b08d290
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Brian Zhu [Fri, 8 Jun 2018 11:00:43 +0000 (19:00 +0800)]
vpp: enable pps last line dummy fixing for g12b
PD#165090: vpp: enable pps last line dummy fixing for g12b
Change-Id: I276d34c1864c4d5265162c6af092b63e1a92efb9
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Shunzhou Jiang [Thu, 7 Jun 2018 09:26:12 +0000 (17:26 +0800)]
G12B: clock: fix mipi_csi_phy clk parent error
PD#165090: clock: Change parent clk name
Change-Id: Ib2a3416481f828e6ddb93ffaf6dc1dd26a2f6d78
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
zhilei.wu [Wed, 6 Jun 2018 12:39:38 +0000 (20:39 +0800)]
dv: enable dolby vision driver
PD#165090: dv: enable dolby vision driver
Change-Id: If4e0f899dbf57a179180ee994af2ddaed25c71ed
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Jiacheng Mei [Wed, 6 Jun 2018 08:00:41 +0000 (16:00 +0800)]
base: add CONFIG_AMLOGIC_MODIFY for EXPORT_SYMBOL
PD#165090: EXPORT_SYMBOL for dma_alloc_from_contiguous && dma_release_from_contiguous
Change-Id: I99720292a02e3f3939bd3ad274daa82d8bc485b2
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
xingwei.zhou [Tue, 5 Jun 2018 08:15:44 +0000 (16:15 +0800)]
G12B: NANOQ: nanoq dts and clock tree modify
PD#165090: NANOQ: modify a311d platform dts and add nanoq clock tree
Change-Id: I62419ade33c2e10a03d12f1fe26f7f54a44364a4
Signed-off-by: xingwei.zhou <xingwei.zhou@amlogic.com>
Evoke Zhang [Mon, 4 Jun 2018 06:10:14 +0000 (14:10 +0800)]
vpu: udpate vpu mem_pd control for g12b
PD#165090: vpu: udpate vpu mem_pd control for g12b
Change-Id: I7ac907d8b00e2ef0884082c3a56afc6b66dd00d5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
pengcheng chen [Mon, 4 Jun 2018 10:10:25 +0000 (18:10 +0800)]
viu2: add viu2 rotate
PD#165090: viu2: add viu2 rotate
Change-Id: Ib9804f7113a8da9fd97c653fcf367b46db5af778
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Nian Jing [Mon, 28 May 2018 09:15:24 +0000 (17:15 +0800)]
cvbs: add cvbs support for g12b
PD#165090: g12b cvbs
Change-Id: I04c26993d96af570a9d3a3bbabd4211d706081b1
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Nan Li [Fri, 1 Jun 2018 03:35:21 +0000 (11:35 +0800)]
sd: optimize sd_uart support
PD#165090: optimize sd_uart pinmux dts.
Change-Id: I89b1d96dee01082d686a3517ef81d9c85e03f3c0
Signed-off-by: Nan Li <nan.li@amlogic.com>
Long Yu [Thu, 31 May 2018 08:42:49 +0000 (16:42 +0800)]
emmc: set co-phase 1 for Highspeed busmode
PD#165090: emmc: set co-phase 1 for Highspeed busmode
Change-Id: Ia2d925121ee101eb3c706b79eae6b0464a3087e4
Signed-off-by: Long Yu <long.yu@amlogic.com>
Jian Hu [Thu, 31 May 2018 08:21:03 +0000 (16:21 +0800)]
arm64: dts: g12b: enable saradc
PD#165090: arm64: dts: g12b: enable saradc
Change-Id: If480dcec3c6eea7d32a480fdeadd7140626a7ec0
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Yixun Lan [Fri, 29 Jun 2018 07:15:36 +0000 (00:15 -0700)]
Merge "base: EXPORT_SYMBOL for dma_alloc_from_contiguous && dma_release_from_contiguous" into amlogic-4.9-dev
Bo Yang [Fri, 29 Jun 2018 07:15:28 +0000 (00:15 -0700)]
Merge "arm64: dts: txlx: add the attestationkeybox of unifykey" into amlogic-4.9-dev
Jiacheng Mei [Tue, 29 May 2018 07:22:58 +0000 (15:22 +0800)]
base: EXPORT_SYMBOL for dma_alloc_from_contiguous && dma_release_from_contiguous
PD#165090: EXPORT_SYMBOL for dma_alloc_from_contiguous && dma_release_from_contiguous
Change-Id: I3809ed9a393e99fad9c63e3cbc60003de2ed8748
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
jianxin.pan [Wed, 30 May 2018 07:09:00 +0000 (15:09 +0800)]
defconfig: bypass Speculation and meltdown walkaround
PD#165090: disable UNMAP_KERNEL_AT_EL0 and HARDEN_BRANCH_PREDICTOR
Change-Id: I5107b974669bb94d727a99e65df1cbed3b7613e6
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
Chao Liu [Tue, 26 Jun 2018 02:24:05 +0000 (10:24 +0800)]
arm64: dts: txlx: add the attestationkeybox of unifykey
PD#167832: GTS AttestationRootHostTest test failed
Change-Id: Ife0e80ade487cb69a4f4871d2e83fedc8242b9ef
Signed-off-by: Chao Liu <chao.liu@amlogic.com>
Nan Li [Wed, 30 May 2018 05:41:16 +0000 (13:41 +0800)]
sd: add sd_uart support on g12b
PD#165090: add sd_uart support on g12b.
Change-Id: Iee7c7a4ec0b2e5269561179779a6eeb3296f80d7
Signed-off-by: Nan Li <nan.li@amlogic.com>
Yu Tu [Wed, 30 May 2018 02:52:17 +0000 (10:52 +0800)]
dtsi: modify xtal_tick_en of uart for g12b
PD#165090: dtsi: modify xtal_tick_en of uart
1.modify after xtal_tick_en = 2 (12MHz)
2.xtal_tick_en = 1 (8MHz)
Change-Id: I1ed4b45d367d3add8196b6d72016a4035464edc2
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
kele bai [Tue, 29 May 2018 11:30:52 +0000 (19:30 +0800)]
di: new mtn ctrl, nrds mif enable in pre ctrl
PD#165090: new mtn ctrl, nrds mif enable in pre ctrl
1) enable mtn ctrl addressed 0x170b
2) fix pre ctrl[11] for nrds mif enable
Change-Id: I1c125991520d2f4c12a5b6b473e52c752f26934d
Signed-off-by: kele bai <kele.bai@amlogic.com>
Qiufang Dai [Tue, 29 May 2018 09:20:53 +0000 (17:20 +0800)]
dts: add g12b_a311d_w400.dts
PD#165090: add g12b_a311d_w400.dts
Change-Id: I7f0c13e662abb0dea61a42f74f0db51190367ef7
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Tue, 29 May 2018 08:54:38 +0000 (16:54 +0800)]
dts: fb: fine-tune fb for 2G mem
PD#165090: fine-tune fb cma/alloc for 2G mem
Change-Id: Ibbe35435eef867b34b46f090791477663b56270d
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
jianxin.pan [Tue, 29 May 2018 04:58:57 +0000 (12:58 +0800)]
eas: update g12b sched eneryg data
PD#165090: update g12b sched energy model data
Change-Id: I27d4ef858c49098042efb97ad5e60c0256bfecdd
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
jianxin.pan [Tue, 29 May 2018 06:10:23 +0000 (14:10 +0800)]
cpufreq: add core param to limit kernel boot cpufreq
PD#165090: add freqmax0 and freqmax1 to limit kernel boot cpufreq
add freqmax0=1000000 to bootargs, and boot freq of cluster0 will be
limited to 1G.
Change-Id: I5cb44727f74c574669663887473a80f87ddf61a7
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
jianxin.pan [Mon, 28 May 2018 07:34:37 +0000 (15:34 +0800)]
sched: disable SD_WAKE_AFFINE
PD#165090: remove WAKE_AFFINE to get better balance when heavy loading
Change-Id: Id5650e9c3fd12b23be04f8f52a0f5c2e11c49199
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
shihong.zheng [Tue, 29 May 2018 08:17:11 +0000 (16:17 +0800)]
dts: g12b add ionvideo
PD#165090: add ionvideo dev
Change-Id: I58bc04485c417cc1774cc642b06e94d897d10a54
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
Evoke Zhang [Sat, 26 May 2018 08:06:16 +0000 (16:06 +0800)]
lcd: add g12b support [2/2]
PD#165090: lcd: add g12b support
Change-Id: I437dbe99cf0a1d9517e61be82e640c7a32dda42d
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Dezhi Kong [Sat, 26 May 2018 06:32:53 +0000 (14:32 +0800)]
vdin/sr: add vdin/viu/sr support for g12b
PD#165090: vdin/viu/sr: add vdin/viu/sr support for g12b
Change-Id: I74e3d879774cddba531498612d88d0642b4ac915
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Hong Guo [Tue, 29 May 2018 06:50:35 +0000 (14:50 +0800)]
PUFREQ: delete big core 1.896G.
PD#165090: cpufreq: delete big core 1.896G.
Change-Id: Ifd438722b67b22c604daabc0ded68d40893bb9a4
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
gongwei.chen [Tue, 29 May 2018 05:15:55 +0000 (13:15 +0800)]
dts: g12b: enable cec
PD#165090: dts: g12b: enable cec
Change-Id: I8c6a173b255e02de2d3d1341ad616d7f86decf6e
Signed-off-by: Gongwei Chen <gongwei.chen@amlogic.com>
Long Yu [Mon, 28 May 2018 14:18:00 +0000 (22:18 +0800)]
emmc: support emmc HS200 for G12B
PD#165090: emmc: support emmc HS200 for G12B
Change-Id: I04d63f64b99f429b3c184555124ea6cbc8761199
Signed-off-by: Long Yu <long.yu@amlogic.com>
pengcheng chen [Mon, 28 May 2018 12:25:50 +0000 (20:25 +0800)]
osd_drm: osd drm for g12b bring up
PD#165090: osd drm for g12b bring up
Change-Id: Id69a152b22ba3e408d20fa494b9475c9ad3797de
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Huan Biao [Mon, 28 May 2018 08:25:14 +0000 (16:25 +0800)]
dts: g12b: enable g12b cooldev
PD#165090: thermal: enable g12b thermal cooldev
Change-Id: I2decf4844a9eeddc9f8187d23bc989be87ef7d14
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
jiamin ma [Mon, 28 May 2018 02:39:13 +0000 (10:39 +0800)]
unifykey: add node in dts and enble it by default
PD#165090: g12b bring up
Change-Id: Iffdc15cf07ed29169a8ee2bdf1c6d6faca626279
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
Hong Guo [Mon, 28 May 2018 08:43:37 +0000 (16:43 +0800)]
CPUFREQ: add big core cpufreq dts config for g12b.
PD#165090: cpufreq: add big corecpufreq dts config for g12b.
Change-Id: I5fc15d84df79ebd1267a59269f3a1d40e2e53651
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Qiufang Dai [Sun, 27 May 2018 10:11:34 +0000 (18:11 +0800)]
clk: add media clk and fine-tune clkmsr table for g12b
PD#165090: add clock isp, mipi, vipnanoq, gate etc.
Fine-tune clkmsr table
Change-Id: I4b15996eccac439ce91ac51365411fca7c38f320
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Sun, 27 May 2018 09:55:19 +0000 (17:55 +0800)]
dts: change g12b skt memsize to 2G
PD#165090: change g12b memsize from 1G to 2G
Change-Id: Iea14e894ad8dae87aaf32aa258de774c8e3b12f5
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
pengcheng chen [Fri, 25 May 2018 12:48:40 +0000 (20:48 +0800)]
osd: bringup for g12b
PD#165090: osd: bringup for g12b
1. add g12b version type
2. init VPP_OFIFO_SIZE
Change-Id: Ia72964ceefd28fb9a536d8362b2fc53ecbb91207
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
gongwei.chen [Sun, 27 May 2018 07:05:41 +0000 (15:05 +0800)]
dts: g12b: disable wifi temp for Android launch
PD#165090: G12B bring up
Change-Id: I031fd49bd29052c5d83508a6e63a0f5b6a97e9fa
Signed-off-by: Gongwei Chen <gongwei.chen@amlogic.com>
jianxin.pan [Sat, 26 May 2018 15:52:58 +0000 (23:52 +0800)]
cpufreq: remove 1896M for A73
PD#165090: remove 1896M for A73, it cause panic
Change-Id: Iae806a4597d5c3bb071585ace05b45b2dfa89ff6
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Long Yu [Sat, 26 May 2018 14:19:59 +0000 (22:19 +0800)]
emmc: enable emmc driver
PD#165090: emmc: enable emmc driver
Change-Id: Ifd4549e03d57c486a4f742fea68aad0aea0fa25a
Signed-off-by: Long Yu <long.yu@amlogic.com>
Jian Hu [Sat, 26 May 2018 12:55:38 +0000 (20:55 +0800)]
arm64: dts: g12b: update i2c pin mux
PD#165090: arm64: dts: g12b: update i2c pin mux
1.add default drive-strength
2.add interal pull up
Change-Id: I061491372463d6b4f499594603837a6877179847
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Hong Guo [Sat, 26 May 2018 09:34:23 +0000 (17:34 +0800)]
CPUFREQ: add cpufreq dts config for g12b.
PD#165090: cpufreq: add cpufreq dts config for g12b.
Change-Id: If03ef64bf55641c771f475884df348b52b867329
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Shuai Li [Sat, 26 May 2018 09:05:15 +0000 (17:05 +0800)]
audio: add audio support for g12b
PD#165090: audio support added.
Change-Id: Ic6a52fa69a9f6c494bbd15de5964c5aca2a90672
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
shihong.zheng [Sat, 26 May 2018 07:53:26 +0000 (15:53 +0800)]
dts: decoder enable for g12b
PD#165090: enable decoder/codec_mm/amstream in dts
Change-Id: I6d221bb98c83a0ccfd33c16cb021b0aeea7c37e3
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
Yonghui Yu [Sat, 26 May 2018 07:18:48 +0000 (15:18 +0800)]
nand: add mtd supported on g12b
PD#165090: mtd nand added.
Change-Id: Ib0bc0e8f42a5a7a54b01ef3ffa31945aed5eb944
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>
Qiufang Dai [Sat, 26 May 2018 03:51:47 +0000 (11:51 +0800)]
clk: add clkmsr for g12b
PD#165090: add clkmsr for g12b
Change-Id: I320b0759b5f3f57e8683ec5732f6660df1f0e052
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Sat, 26 May 2018 03:31:36 +0000 (11:31 +0800)]
clk: add sys1_pll/sys_pll for g12b
PD#165090: Add sys1_pll/sys_pll for g12b
These patch is compatible with g12a.
clk structur:
G12A: sys_pll(0xbd) ----> cpu_mux(0x67) ---> A53
G12B: sys1_pll(0xe0) ----> cpu_mux(0x67) ---> A53
sys_pll(0xbd) ----> cpu_mux1(0x82) ---> A73
Change-Id: I67b508f216db6124885154ea09ccb4868834e772
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
bichao.zheng [Sat, 26 May 2018 03:49:17 +0000 (11:49 +0800)]
pwm: pwm driver compatible with g12b
PD#165090: pwm: pwm driver compatible with g12b
pwm driver compatible with g12b,enable pwm controller pwm_AO_cd
pwm_ab pwm_ef for dvfs and wifi.
Change-Id: If65c4b5239ee0a4f4409aa85d9481645b44521e9
Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com>
Brian Zhu [Sat, 26 May 2018 06:25:07 +0000 (14:25 +0800)]
vpp: enable amvideo module for g12b
PD#165090: vpp: enable amvideo module for g12b
Change-Id: Ifef976077e2578585aa02719bc85a67bc3c19185
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Nan Li [Fri, 25 May 2018 11:59:48 +0000 (19:59 +0800)]
sd: add mmc supported on g12b
PD#165090: emmc highspeed, sd highspeed.
Change-Id: Ia3899a29a97e354ec75943e21f7b1e4077f3376e
Signed-off-by: Nan Li <nan.li@amlogic.com>
Jian Hu [Fri, 25 May 2018 11:04:11 +0000 (19:04 +0800)]
arm64: dts: g12b: add i2c devicetree
PD#165090: arm64: dts: g12b: add i2c devicetree
Change-Id: I289d5b71ae0dc1080cb6c9e56c786a1937e124d6
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Jian Hu [Fri, 25 May 2018 09:09:08 +0000 (17:09 +0800)]
i2c: add support for g12b
PD#165090: i2c: add support for g12b
Change-Id: I2240e361dff3e3d56898ffb4f43c1ad4cadd3912
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Yi Zhou [Thu, 24 May 2018 11:11:55 +0000 (19:11 +0800)]
hdmitx: bringup for g12b to g12b3
PD#165090: hdmitx: bringup for g12b to g12b3
add g12b ic_type
Change-Id: I2b6871fc228a04dfffe0c5a0131b38a4cfbf6c64
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yue Wang [Fri, 25 May 2018 06:22:33 +0000 (14:22 +0800)]
dts: add usb/pcie/ethernet/uart dts config on g12b skt
PD#165090: add usb/pcie/ethernet/uart dts config on g12b skt
Change-Id: Idba2f66ccac904564f49427269474ec27499a58e
Signed-off-by: yue wang <yue.wang@amlogic.com>
Huan Biao [Fri, 25 May 2018 08:16:15 +0000 (16:16 +0800)]
thermal: enable thermal sensor for g12b
PD#165090: thermal: enable g12b thermal sensor dts
Change-Id: Ia7dbdf0330bacbd50bc1f1c599abac439ff38985
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Qiufang Dai [Fri, 11 May 2018 09:31:59 +0000 (17:31 +0800)]
clk: add g12b.c for g12b new clocks
PD#165090: add g12b.c for new clocks, include sys1_pll
Change-Id: If9234037eab5439cf1abfbcecc70c9f4eab6c954
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Qiufang Dai [Fri, 25 May 2018 04:16:29 +0000 (12:16 +0800)]
dts: add g12b skt dts
PD#165090: add g12b skt a311d dts
Change-Id: Icdb5f8aea3d83d74731c7828986bac01da39c7bb
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Hong Guo [Wed, 23 May 2018 08:50:53 +0000 (16:50 +0800)]
CPUFREQ: add cpufreq dts config for g12b.
PD#165090: cpufreq: add cpufreq dts config for g12b.
Change-Id: I5478b967d14a574a3b435743363cdb23969b38e9
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
kele bai [Fri, 18 May 2018 10:48:20 +0000 (18:48 +0800)]
di: add madi&mcdi&nr4 for g12b
PD#165090: di: add madi&mcdi&nr4 for g12b
Change-Id: Icebb9761915e005afca90974efc9c96d0d8b0c63
Signed-off-by: kele bai <kele.bai@amlogic.com>
pengcheng chen [Sat, 12 May 2018 07:46:26 +0000 (15:46 +0800)]
osd: add mali-afbc frame reset for g12b
PD#165090: osd: add mali-afbc frame reset for g12b
Change-Id: If0176807a1a845a1eebb6c53ad05fdff2e5a1654
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Xingyu Chen [Wed, 9 May 2018 09:05:14 +0000 (17:05 +0800)]
pinctrl: add extra pin-groups for g12b
PD#165090: pinctrl: add extra pin-groups for g12b
The pins on G12B are compatible with the G12A, but it introduces
extra mux function for a few of pins.
Change-Id: I686a952b85dd014cc9de95364dd7dec4e1a53ee7
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Brian Zhu [Thu, 10 May 2018 15:19:14 +0000 (23:19 +0800)]
vpp: enable the video data path for g12b
PD#165090: vpp: enable the video data path for g12b
Change-Id: I35fd1e61d97d4d416f70f954c58217b70740e6f3
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Qiufang Dai [Mon, 7 May 2018 13:04:23 +0000 (21:04 +0800)]
media: adds the register ops for g12b
PD#165090: adds the register ops for g12b
Change-Id: Id7bb271934e5826b65fbf992dff9798fb6323e40
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
pengcheng chen [Fri, 4 May 2018 14:02:25 +0000 (22:02 +0800)]
osd: bringup for g12b
PD#165090: osd: bringup for g12b
Change-Id: Ib1f721f695482a90716273555c7802a925145227
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Evoke Zhang [Mon, 7 May 2018 03:11:34 +0000 (11:11 +0800)]
vpu: add g12b support
PD#165090: vpu: add g12b support
Change-Id: I16fcd32700a5868209cd30563435b54f27a157a5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Qiufang Dai [Mon, 7 May 2018 06:29:49 +0000 (14:29 +0800)]
clk: add sys1_pll for g12b
PD#165090: add sys1_pll for g12b
Change-Id: Icc1be3df1ca9ba2863ce49e0acf0be872e2dd411
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Qiufang Dai [Mon, 7 May 2018 03:37:14 +0000 (11:37 +0800)]
cpuver: g12b: add cpuversion api for g12b
PD#165090: add cpuversion api for g12b
Change-Id: I64a5edb8953258b2033fe6aab05e75890ff7e9ae
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Yi Zhou [Fri, 4 May 2018 07:39:05 +0000 (15:39 +0800)]
hdmitx: bringup for g12b
PD#165090: hdmitx: bringup for g12b
1. update address of RESET0_REGISTER
2. open hdmitx function
Change-Id: I4878d25109058c67046003dc349572df2bb991a2
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
jianxin.pan [Sat, 28 Apr 2018 07:24:04 +0000 (15:24 +0800)]
sched: eas support
PD#165090: EAS support on g12b
Change-Id: Ic816ddef61e80f39944251f67ca8ebb2cb36f8ae
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
Yan Wang [Mon, 23 Apr 2018 07:37:16 +0000 (15:37 +0800)]
dts: g12b: initial add g12b
PD#165090: initial add g12b
initial G12B dts for bringup.
Change-Id: If7c390b2139055f637fb17fb4e3ce0acd71a6f17
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Brian Zhu [Thu, 21 Jun 2018 18:06:16 +0000 (02:06 +0800)]
vpp: set vd & afbc's hold lines as vpp hold lines
PD#168549: vpp: set vd & afbc's hold lines as vpp hold lines
Change-Id: Ie5c1690ec57408d3650b8ad8a2538490edbd7430
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Evoke Zhang [Wed, 20 Jun 2018 07:15:45 +0000 (15:15 +0800)]
vpu: code coverity fix
PD#168737: vpu: code coverity fix
Change-Id: Icbeb972a7022531c9146559046c1bddd28f44ab3
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
yicheng shen [Thu, 21 Jun 2018 11:32:22 +0000 (19:32 +0800)]
hdmirx: fix coverity errors
PD#167692: hdmirx: fix coverity errors
Change-Id: I685ff24dc791a2bfd233c7f6db3ce23bf6744207
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Nan Li [Fri, 22 Jun 2018 05:26:04 +0000 (13:26 +0800)]
emmc: add tuning retry.
PD#167389: add tuning retry when tuning points num == clk_div.
Change-Id: I9cc68c9c69c1aad55e8cc916a5d5a4f6441e3ace
Signed-off-by: Nan Li <nan.li@amlogic.com>
Long Yu [Fri, 27 Apr 2018 09:48:15 +0000 (17:48 +0800)]
emmc: Optimized hs200 mode with the known latest data line
PD#165333: emmc: Optimized hs200 mode with the known latest data line
Change-Id: Ic1581dbfbadda8e14879beabb4f7ae4a4a30546f
Signed-off-by: Long Yu <long.yu@amlogic.com>
Jihong Sui [Fri, 15 Jun 2018 07:57:10 +0000 (15:57 +0800)]
dtv_demod: fix atsc search bug and clear coverity warning
PD#168297: fix atsc search bug
1. change j83/atsc search mechanism;
2. delet 'set_frontend' in dvb_fronten.c
3. clear coverity warning;
Change-Id: I9f9905ce88dea435a9d7ac46617ea34786a0b176
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
shuanglong.wang [Tue, 19 Jun 2018 03:23:49 +0000 (11:23 +0800)]
video: Add pulldown pattern metrics pick from bug168503
PD#168503: video: Add pulldown pattern metrics
[Problem]
The 3:2,2:2,4:1 pulldown metrics information added in
framework
does not cover the cases for 4K, secure playback and tunnel mode.
[Solution]
Add the 3:2,2:2,4:1 pulldown metrics information in video
display driver from kernel space.
Change-Id: I2e09a797b1114bf9d6e2bdc07025a8f065f03635
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Huan Biao [Thu, 7 Jun 2018 11:27:44 +0000 (19:27 +0800)]
ring: ring: add osc ring efuse info get cmd for g12 [3/3]
PD#165091:
Problem:
no osc ring efuse info
Solution:
add g12 osc ring efuse info get cmd
Verify:
g12 skt
Change-Id: I5adf6efd9787a6afeea38e959105f4a273a82bad
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
pengcheng chen [Thu, 21 Jun 2018 03:20:40 +0000 (11:20 +0800)]
osd: fix dfbshow display error in none 1080p mode
PD#168740: osd: fix dfbshow display error in none 1080p mode
Change-Id: Ia196cd2635d8cee1b62abd1793c1679b9674578e
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Yixun Lan [Fri, 25 May 2018 06:42:19 +0000 (14:42 +0800)]
network: enable UDP socket monitoring
PD#167119: network: enable UDP socket monitoring
this is need by VtsKernelNetTests, otherwise some test cases will fail
Error info:
testUdp (sock_diag_test.SockDestroyPermissionTest) ... skipped 'INET_UDP_DIAG not enabled'
testClosesUdpSockets (sock_diag_test.SockDestroyUdpTest) ... skipped 'INET_UDP_DIAG not enabled'
testReadInterrupted (sock_diag_test.SockDestroyUdpTest)
Tests that read() is interrupted by SOCK_DESTROY. ... skipped 'INET_UDP_DIAG not enabled'
testSocketAddressesAfterClose (sock_diag_test.SockDestroyUdpTest) ... skipped 'INET_UDP_DIAG not enabled'
Change-Id: I732f8d654a476614308992c756d5c8a8711bbbc9
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Yixun Lan [Fri, 25 May 2018 06:20:56 +0000 (14:20 +0800)]
network: enable VTI option
PD#167119: network: enable VTI option
this is need by VtsKernelNetTests, otherwise some test cases will fail
Error info:
ERROR: testAddVti (xfrm_tunnel_test.XfrmAddDeleteVtiTest)
Test the creation of a Virtual Tunnel Interface.
Change-Id: I19b05d7684ab97245f02384c4f50cee349f76131
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Yixun Lan [Fri, 25 May 2018 05:50:50 +0000 (13:50 +0800)]
crypto: enable sha512 algorithm
PD#167119: crypto: enable sha512 algorithm
this is need by VtsKernelNetTests, the xfrm test case
will require this option to work, otherwise will fail
errors info:
testSocketPolicySimple_cbc-aes_192_hmac-sha512_512_256_IPv4_TCP (xfrm_algorithm_test.XfrmAlgorithmTest) ... ERROR
testSocketPolicySimple_cbc-aes_192_hmac-sha512_512_256_IPv4_UDP (xfrm_algorithm_test.XfrmAlgorithmTest) ... ERROR
testSocketPolicySimple_cbc-aes_192_hmac-sha512_512_256_IPv6_TCP (xfrm_algorithm_test.XfrmAlgorithmTest) ... ERROR
testSocketPolicySimple_cbc-aes_192_hmac-sha512_512_256_IPv6_UDP (xfrm_algorithm_test.XfrmAlgorithmTest) ... ERROR
testSocketPolicySimple_cbc-aes_192_hmac-sha512_512_512_IPv4_TCP (xfrm_algorithm_test.XfrmAlgorithmTest) ... ERROR
Change-Id: I7f2502c4c76c09f00fe2719aac3f26b9b0d7f772
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>