Jiri Kosina [Mon, 10 Jan 2022 08:55:44 +0000 (09:55 +0100)]
Merge branch 'for-5.17/hidraw' into for-linus
- locking performance improvement for hidraw code (André Almeida)
Jiri Kosina [Mon, 10 Jan 2022 08:54:31 +0000 (09:54 +0100)]
Merge branch 'for-5.17/apple' into for-linus
- Apple Magic Keyboard support improvements (José Expósito, Alex Henrie,
Benjamin Berg)
Jiri Kosina [Mon, 10 Jan 2022 08:49:13 +0000 (09:49 +0100)]
Merge branch 'for-5.17/core' into for-linus
- support for USI style pens (Tero Kristo, Mika Westerberg)
- quirk for devices that need inverted X/Y axes (Alistair Francis)
- small core code cleanups and deduplication (Benjamin Tissoires)
Lukas Bulwahn [Thu, 16 Dec 2021 09:21:57 +0000 (10:21 +0100)]
HID: address kernel-doc warnings
The command ./scripts/kernel-doc -none include/linux/hid.h reports:
include/linux/hid.h:818: warning: cannot understand function prototype: 'struct hid_ll_driver '
include/linux/hid.h:1135: warning: expecting prototype for hid_may_wakeup(). Prototype was for hid_hw_may_wakeup() instead
Address those kernel-doc warnings.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Yang Li [Thu, 16 Dec 2021 04:01:46 +0000 (12:01 +0800)]
HID: intel-ish-hid: ishtp-fw-loader: Fix a kernel-doc formatting issue
This function had kernel-doc that not used a hash to separate
the function name from the one line description.
The warning was found by running scripts/kernel-doc, which is
caused by using 'make W=1'.
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:271: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Ye Xiang [Fri, 17 Dec 2021 07:45:41 +0000 (15:45 +0800)]
HID: intel-ish-hid: ipc: Specify no cache snooping on TGL and ADL
Specify that both TGL and ADL don't support DMA cache snooping.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
José Expósito [Wed, 5 Jan 2022 17:29:15 +0000 (18:29 +0100)]
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes:
9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443763 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
José Expósito [Wed, 5 Jan 2022 17:29:14 +0000 (18:29 +0100)]
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes:
9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443804 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
José Expósito [Wed, 5 Jan 2022 17:29:13 +0000 (18:29 +0100)]
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes:
9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443827 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
José Expósito [Wed, 5 Jan 2022 17:29:12 +0000 (18:29 +0100)]
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes:
9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443831 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
José Expósito [Sun, 2 Jan 2022 17:51:13 +0000 (18:51 +0100)]
HID: apple: Add Magic Keyboard 2021 with fingerprint reader FN key mapping
Use the function key table introduced for the Magic Keyboard 2021
without fingerprint reader in the models with fingerprint reader and/or
numpad.
Tested with the ANSI variant of the keyboard with and without numpad.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Berg [Mon, 8 Nov 2021 12:50:38 +0000 (13:50 +0100)]
HID: apple: Add 2021 magic keyboard FN key mapping
The new 2021 apple models have a different FN key assignment. Add a new
translation table and use that for the 2021 magic keyboard.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
José Expósito [Sun, 12 Dec 2021 18:21:00 +0000 (19:21 +0100)]
HID: magicmouse: set Magic Trackpad 2021 name
The Apple Magic Trackpad 2021 (3rd generation) has the same product ID
as the 2nd generation. However, when connected through Bluetooth, the
version has changed from 0x107 to 0x110.
The other meaningful change is that the name has dropped the generation
number and now it is just "Apple Inc. Magic Trackpad", like the first
generation model.
Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
José Expósito [Sun, 12 Dec 2021 18:20:59 +0000 (19:20 +0100)]
HID: magicmouse: set device name when it has been personalized
If the Apple Magic Trackpad 2 has been connected to a Mac, the name
is automatically personalized showing its owner name. For example:
"José Expósito's Trackpad".
When connected through Bluetooth, the personalized name is reported,
however, when connected through USB the generic name is reported.
Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Alex Henrie [Thu, 2 Dec 2021 06:16:51 +0000 (23:16 -0700)]
HID: apple: Add 2021 Magic Keyboard with number pad
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Alex Henrie [Thu, 2 Dec 2021 06:16:50 +0000 (23:16 -0700)]
HID: apple: Add 2021 Magic Keyboard with fingerprint reader
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiasheng Jiang [Wed, 15 Dec 2021 08:36:05 +0000 (16:36 +0800)]
HID: potential dereference of null pointer
The return value of devm_kzalloc() needs to be checked.
To avoid hdev->dev->driver_data to be null in case of the failure of
alloc.
Fixes:
14c9c014babe ("HID: add vivaldi HID driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211215083605.117638-1-jiasheng@iscas.ac.cn
Benjamin Tissoires [Mon, 20 Dec 2021 09:51:20 +0000 (10:51 +0100)]
HID: holtek: fix mouse probing
An overlook from the previous commit: we don't even parse or start the
device, meaning that the device is not presented to user space.
Fixes:
93020953d0fa ("HID: check for valid USB device for many HID drivers")
Cc: stable@vger.kernel.org
Link: https://bugs.archlinux.org/task/73048
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341
Link: https://lore.kernel.org/r/e4efbf13-bd8d-0370-629b-6c80c0044b15@leemhuis.info/
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Alistair Francis [Wed, 8 Dec 2021 12:40:44 +0000 (22:40 +1000)]
HID: i2c-hid-of: Expose the touchscreen-inverted properties
Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
[bentiss: silence checkpatch warnings]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-3-alistair@alistair23.me
Alistair Francis [Wed, 8 Dec 2021 12:40:43 +0000 (22:40 +1000)]
HID: quirks: Allow inverting the absolute X/Y values
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
André Almeida [Tue, 30 Nov 2021 13:29:57 +0000 (10:29 -0300)]
HID: hidraw: Replace hidraw device table mutex with a rwsem
Currently, the table that stores information about the connected hidraw
devices has a mutex to prevent concurrent hidraw users to manipulate the
hidraw table (e.g. delete an entry) while someone is trying to use
the table (e.g. issuing an ioctl to the device), preventing the kernel
to referencing a NULL pointer. However, since that every user that wants
to access the table for both manipulating it and reading it content,
this prevents concurrent access to the table for read-only operations
for different or the same device (e.g. two hidraw ioctls can't happen at
the same time, even if they are completely unrelated).
This proves to be a bottleneck and gives performance issues when using
multiple HID devices at same time, like VR kits where one can have two
controllers, the headset and some tracking sensors.
To improve the performance, replace the table mutex with a read-write
semaphore, enabling multiple threads to issue parallel syscalls to
multiple devices at the same time while protecting the table for
concurrent modifications.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130132957.8480-2-andrealmeid@collabora.com
Mika Westerberg [Fri, 10 Dec 2021 11:11:38 +0000 (13:11 +0200)]
HID: debug: Add USI usages
Add USI defined usages to the HID debug code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-6-tero.kristo@linux.intel.com
Mika Westerberg [Fri, 10 Dec 2021 11:11:37 +0000 (13:11 +0200)]
HID: input: Make hidinput_find_field() static
This function is not called outside of hid-input.c so we can make it
static.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-5-tero.kristo@linux.intel.com
Tero Kristo [Fri, 10 Dec 2021 11:11:36 +0000 (13:11 +0200)]
HID: Add hid usages for USI style pens
Add usage codes for USI style pens, based on the USB-HID usage table:
https://usb.org/document-library/hid-usage-tables-122
See chapter 16, Digitizers Page (0x0D)
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-4-tero.kristo@linux.intel.com
Mika Westerberg [Fri, 10 Dec 2021 11:11:35 +0000 (13:11 +0200)]
HID: hid-input: Add suffix also for HID_DG_PEN
This and HID_DG_STYLUS are pretty much the same thing so add suffix for
HID_DG_PEN too. This makes the input device name look better.
While doing this, remove the suffix override from hid-multitouch, as it
is now handled by hid-input. Also, the suffix override done by
hid-multitouch was wrong, as it mapped HID_DG_PEN => "Stylus" and
HID_DG_STYLUS => "Pen".
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
[bentiss: amended to keep the same name for hid-multitouch devices]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-3-tero.kristo@linux.intel.com
Mika Westerberg [Fri, 10 Dec 2021 11:11:34 +0000 (13:11 +0200)]
HID: Add map_msc() to avoid boilerplate code
Since we are going to have more MSC events too, add map_msc() that can
be used to fill in necessary fields and avoid boilerplate code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-2-tero.kristo@linux.intel.com
Linus Torvalds [Thu, 9 Dec 2021 19:08:19 +0000 (11:08 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fixes for various drivers which assume that a HID device is on USB
transport, but that might not necessarily be the case, as the device
can be faked by uhid. (Greg, Benjamin Tissoires)
- fix for spurious wakeups on certain Lenovo notebooks (Thomas
Weißschuh)
- a few other device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for Elan touchscreen on Asus UX550VE
HID: intel-ish-hid: ipc: only enable IRQ wakeup when requested
HID: google: add eel USB id
HID: add USB_HID dependancy to hid-prodikeys
HID: add USB_HID dependancy to hid-chicony
HID: bigbenff: prevent null pointer dereference
HID: sony: fix error path in probe
HID: add USB_HID dependancy on some USB HID drivers
HID: check for valid USB device for many HID drivers
HID: wacom: fix problems when device is not a valid USB device
HID: add hid_is_usb() function to make it simpler for USB detection
HID: quirks: Add quirk for the Microsoft Surface 3 type-cover
Linus Torvalds [Thu, 9 Dec 2021 18:49:36 +0000 (10:49 -0800)]
Merge tag 'netfs-fixes-
20211207' of git://git./linux/kernel/git/dhowells/linux-fs
Pull netfslib fixes from David Howells:
- Fix a lockdep warning and potential deadlock. This is takes the
simple approach of offloading the write-to-cache done from within a
network filesystem read to a worker thread to avoid taking the
sb_writer lock from the cache backing filesystem whilst holding the
mmap lock on an inode from the network filesystem.
Jan Kara posits a scenario whereby this can cause deadlock[1], though
it's quite complex and I think requires someone in userspace to
actually do I/O on the cache files. Matthew Wilcox isn't so certain,
though[2].
An alternative way to fix this, suggested by Darrick Wong, might be
to allow cachefiles to prevent userspace from performing I/O upon the
file - something like an exclusive open - but that's beyond the scope
of a fix here if we do want to make such a facility in the future.
- In some of the error handling paths where netfs_ops->cleanup() is
called, the arguments are transposed[3]. gcc doesn't complain because
one of the parameters is void* and one of the values is void*.
Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/
Link: https://lore.kernel.org/r/Ya9eDiFCE2fO7K/S@casper.infradead.org/
Link: https://lore.kernel.org/r/20211207031449.100510-1-jefflexu@linux.alibaba.com/
* tag 'netfs-fixes-
20211207' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: fix parameter of cleanup()
netfs: Fix lockdep warning from taking sb_writers whilst holding mmap_lock
Sasha Levin [Thu, 9 Dec 2021 16:51:13 +0000 (11:51 -0500)]
tools/lib/lockdep: drop leftover liblockdep headers
Clean up remaining headers that are specific to liblockdep but lived in
the shared header directory. These are all unused after the liblockdep
code was removed in commit
7246f4dcaccc ("tools/lib/lockdep: drop
liblockdep").
Note that there are still headers that were originally created for
liblockdep, that still have liblockdep references, but they are used by
other tools/ code at this point.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hans de Goede [Tue, 7 Dec 2021 12:10:53 +0000 (13:10 +0100)]
HID: Ignore battery for Elan touchscreen on Asus UX550VE
Battery status is reported for the Asus UX550VE touchscreen even though
it does not have a battery. Prevent it from always reporting the
battery as low.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Tue, 7 Dec 2021 23:36:45 +0000 (15:36 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2021-12-07' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix SMT detection fast read path on sysfs.
- Fix memory leaks when processing feature headers in perf.data files.
- Fix 'Simple expression parser' 'perf test' on arch without CPU die
topology info, such as s/390.
- Fix building perf with BUILD_BPF_SKEL=1.
- Fix 'perf bench' by reverting "perf bench: Fix two memory leaks
detected with ASan".
- Fix itrace space allowed for new attributes in 'perf script'.
- Fix the build feature detection fast path, that was always failing on
systems with python3 development packages, speeding up the build.
- Reset shadow counts before loading, fixing metrics using
duration_time.
- Sync more kernel headers changed by the new futex_waitv syscall: s390
and powerpc.
* tag 'perf-tools-fixes-for-v5.16-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf_skel: Do not use typedef to avoid error on old clang
perf bpf: Fix building perf with BUILD_BPF_SKEL=1 by default in more distros
perf header: Fix memory leaks when processing feature headers
perf test: Reset shadow counts before loading
perf test: Fix 'Simple expression parser' test on arch without CPU die topology info
tools build: Remove needless libpython-version feature check that breaks test-all fast path
perf tools: Fix SMT detection fast read path
tools headers UAPI: Sync powerpc syscall table file changed by new futex_waitv syscall
perf inject: Fix itrace space allowed for new attributes
tools headers UAPI: Sync s390 syscall table file changed by new futex_waitv syscall
Revert "perf bench: Fix two memory leaks detected with ASan"
Linus Torvalds [Tue, 7 Dec 2021 18:10:20 +0000 (10:10 -0800)]
Merge tag 'platform-drivers-x86-v5.16-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various bug-fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: hid: add quirk to support Surface Go 3
platform/x86: amd-pmc: Fix s2idle failures on certain AMD laptops
platform/x86: touchscreen_dmi: Add TrekStor SurfTab duo W1 touchscreen info
platform/x86: lg-laptop: Recognize more models
platform/x86: thinkpad_acpi: Add lid_logo_dot to the list of safe LEDs
platform/x86: thinkpad_acpi: Restore missing hotkey_tablet_mode and hotkey_radio_sw sysfs-attr
Jeffle Xu [Tue, 7 Dec 2021 03:14:49 +0000 (11:14 +0800)]
netfs: fix parameter of cleanup()
The order of these two parameters is just reversed. gcc didn't warn on
that, probably because 'void *' can be converted from or to other
pointer types without warning.
Cc: stable@vger.kernel.org
Fixes:
3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Fixes:
e1b1240c1ff5 ("netfs: Add write_begin helper")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Link: https://lore.kernel.org/r/20211207031449.100510-1-jefflexu@linux.alibaba.com/
David Howells [Tue, 7 Dec 2021 09:53:24 +0000 (09:53 +0000)]
netfs: Fix lockdep warning from taking sb_writers whilst holding mmap_lock
Taking sb_writers whilst holding mmap_lock isn't allowed and will result in
a lockdep warning like that below. The problem comes from cachefiles
needing to take the sb_writers lock in order to do a write to the cache,
but being asked to do this by netfslib called from readpage, readahead or
write_begin[1].
Fix this by always offloading the write to the cache off to a worker
thread. The main thread doesn't need to wait for it, so deadlock can be
avoided.
This can be tested by running the quick xfstests on something like afs or
ceph with lockdep enabled.
WARNING: possible circular locking dependency detected
5.15.0-rc1-build2+ #292 Not tainted
------------------------------------------------------
holetest/65517 is trying to acquire lock:
ffff88810c81d730 (mapping.invalidate_lock#3){.+.+}-{3:3}, at: filemap_fault+0x276/0x7a5
but task is already holding lock:
ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&mm->mmap_lock#2){++++}-{3:3}:
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
__might_fault+0x87/0xb1
strncpy_from_user+0x25/0x18c
removexattr+0x7c/0xe5
__do_sys_fremovexattr+0x73/0x96
do_syscall_64+0x67/0x7a
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #1 (sb_writers#10){.+.+}-{0:0}:
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
cachefiles_write+0x2b3/0x4bb
netfs_rreq_do_write_to_cache+0x3b5/0x432
netfs_readpage+0x2de/0x39d
filemap_read_page+0x51/0x94
filemap_get_pages+0x26f/0x413
filemap_read+0x182/0x427
new_sync_read+0xf0/0x161
vfs_read+0x118/0x16e
ksys_read+0xb8/0x12e
do_syscall_64+0x67/0x7a
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (mapping.invalidate_lock#3){.+.+}-{3:3}:
check_noncircular+0xe4/0x129
check_prev_add+0x16b/0x3a4
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
down_read+0x40/0x4a
filemap_fault+0x276/0x7a5
__do_fault+0x96/0xbf
do_fault+0x262/0x35a
__handle_mm_fault+0x171/0x1b5
handle_mm_fault+0x12a/0x233
do_user_addr_fault+0x3d2/0x59c
exc_page_fault+0x85/0xa5
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
mapping.invalidate_lock#3 --> sb_writers#10 --> &mm->mmap_lock#2
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_lock#2);
lock(sb_writers#10);
lock(&mm->mmap_lock#2);
lock(mapping.invalidate_lock#3);
*** DEADLOCK ***
1 lock held by holetest/65517:
#0:
ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c
stack backtrace:
CPU: 0 PID: 65517 Comm: holetest Not tainted 5.15.0-rc1-build2+ #292
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
dump_stack_lvl+0x45/0x59
check_noncircular+0xe4/0x129
? print_circular_bug+0x207/0x207
? validate_chain+0x461/0x4a8
? add_chain_block+0x88/0xd9
? hlist_add_head_rcu+0x49/0x53
check_prev_add+0x16b/0x3a4
validate_chain+0x3c4/0x4a8
? check_prev_add+0x3a4/0x3a4
? mark_lock+0xa5/0x1c6
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
? filemap_fault+0x276/0x7a5
? rcu_read_unlock+0x59/0x59
? add_to_page_cache_lru+0x13c/0x13c
? lock_is_held_type+0x7b/0xd3
down_read+0x40/0x4a
? filemap_fault+0x276/0x7a5
filemap_fault+0x276/0x7a5
? pagecache_get_page+0x2dd/0x2dd
? __lock_acquire+0x8bc/0x949
? pte_offset_kernel.isra.0+0x6d/0xc3
__do_fault+0x96/0xbf
? do_fault+0x124/0x35a
do_fault+0x262/0x35a
? handle_pte_fault+0x1c1/0x20d
__handle_mm_fault+0x171/0x1b5
? handle_pte_fault+0x20d/0x20d
? __lock_release+0x151/0x254
? mark_held_locks+0x1f/0x78
? rcu_read_unlock+0x3a/0x59
handle_mm_fault+0x12a/0x233
do_user_addr_fault+0x3d2/0x59c
? pgtable_bad+0x70/0x70
? rcu_read_lock_bh_held+0xab/0xab
exc_page_fault+0x85/0xa5
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x40192f
Code: ff 48 89 c3 48 8b 05 50 28 00 00 48 85 ed 7e 23 31 d2 4b 8d 0c 2f eb 0a 0f 1f 00 48 8b 05 39 28 00 00 48 0f af c2 48 83 c2 01 <48> 89 1c 01 48 39 d5 7f e8 8b 0d f2 27 00 00 31 c0 85 c9 74 0e 8b
RSP: 002b:
00007f9931867eb0 EFLAGS:
00010202
RAX:
0000000000000000 RBX:
00007f9931868700 RCX:
00007f993206ac00
RDX:
0000000000000001 RSI:
0000000000000000 RDI:
00007ffc13e06ee0
RBP:
0000000000000100 R08:
0000000000000000 R09:
00007f9931868700
R10:
00007f99318689d0 R11:
0000000000000202 R12:
00007ffc13e06ee0
R13:
0000000000000c00 R14:
00007ffc13e06e00 R15:
00007f993206a000
Fixes:
726218fdc22c ("netfs: Define an interface to talk to a cache")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
cc: Jan Kara <jack@suse.cz>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/
Link: https://lore.kernel.org/r/163887597541.1596626.2668163316598972956.stgit@warthog.procyon.org.uk/
Song Liu [Fri, 3 Dec 2021 23:14:41 +0000 (15:14 -0800)]
perf bpf_skel: Do not use typedef to avoid error on old clang
When building bpf_skel with clang-10, typedef causes confusions like:
libbpf: map 'prev_readings': unexpected def kind var.
Fix this by removing the typedef.
Fixes:
7fac83aaf2eecc9e ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/BEF5C312-4331-4A60-AEC0-AD7617CB2BC4@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Song Liu [Fri, 3 Dec 2021 19:32:34 +0000 (19:32 +0000)]
perf bpf: Fix building perf with BUILD_BPF_SKEL=1 by default in more distros
Arnaldo reported that building all his containers with BUILD_BPF_SKEL=1
to then make this the default he found problems in some distros where
the system linux/bpf.h file was being used and lacked this:
util/bpf_skel/bperf_leader.bpf.c:13:20: error: use of undeclared identifier 'BPF_F_PRESERVE_ELEMS'
__uint(map_flags, BPF_F_PRESERVE_ELEMS);
So use instead the vmlinux.h file generated by bpftool from BTF info.
This fixed these as well, getting the build back working on debian:11,
debian:experimental and ubuntu:21.10:
In file included from In file included from util/bpf_skel/bperf_leader.bpf.cutil/bpf_skel/bpf_prog_profiler.bpf.c::33:
:
In file included from In file included from /usr/include/linux/bpf.h/usr/include/linux/bpf.h::1111:
:
/usr/include/linux/types.h/usr/include/linux/types.h::55::1010:: In file included from util/bpf_skel/bperf_follower.bpf.c:3fatal errorfatal error:
: : In file included from /usr/include/linux/bpf.h:'asm/types.h' file not found11'asm/types.h' file not found:
/usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
#include <asm/types.h>#include <asm/types.h>
^~~~~~~~~~~~~ ^~~~~~~~~~~~~
#include <asm/types.h>
^~~~~~~~~~~~~
1 error generated.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/CF175681-8101-43D1-ABDB-449E644BE986@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 18 Nov 2021 20:17:30 +0000 (12:17 -0800)]
perf header: Fix memory leaks when processing feature headers
These leaks were found with leak sanitizer running "perf pipe recording
and injection test".
In pipe mode feat_fd may hold onto an events struct that needs freeing.
When string features are processed they may overwrite an already created
string, so free this before the overwrite.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118201730.2302927-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Sun, 28 Nov 2021 08:58:10 +0000 (00:58 -0800)]
perf test: Reset shadow counts before loading
Otherwise load counting is an average. Without this change
duration_time in test_memory_bandwidth will alter its value if an
earlier test contains duration_time.
This patch fixes an issue that's introduced in the proposed patch:
https://lore.kernel.org/lkml/
20211124015226.3317994-1-irogers@google.com/
in perf test "Parse and process metrics".
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211128085810.4027314-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Mon, 29 Nov 2021 11:23:39 +0000 (12:23 +0100)]
perf test: Fix 'Simple expression parser' test on arch without CPU die topology info
Some platforms do not have CPU die support, for example s390.
Commit
Cc: Ian Rogers <irogers@google.com>
Fixes:
fdf1e29b6118c18f ("perf expr: Add metric literals for topology.")
fails on s390:
# perf test -Fv 7
...
# FAILED tests/expr.c:173 #num_dies >= #num_packages
---- end ----
Simple expression parser: FAILED!
#
Investigating this issue leads to these functions:
build_cpu_topology()
+--> has_die_topology(void)
{
struct utsname uts;
if (uname(&uts) < 0)
return false;
if (strncmp(uts.machine, "x86_64", 6))
return false;
....
}
which always returns false on s390. The caller build_cpu_topology()
checks has_die_topology() return value. On false the the struct
cpu_topology::die_cpu_list is not contructed and has zero entries. This
leads to the failing comparison: #num_dies >= #num_packages. s390 of
course has a positive number of packages.
Fix this and check if the function build_cpu_topology() did build up
a die_cpus_list. The number of entries in this list should be larger
than 0. If the number of list element is zero, the die_cpus_list has
not been created and the check in function test__expr():
TEST_ASSERT_VAL("#num_dies >= #num_packages", \
num_dies >= num_packages)
always fails.
Output after:
# perf test -Fv 7
7: Simple expression parser :
--- start ---
division by zero
syntax error
---- end ----
Simple expression parser: Ok
#
Fixes:
fdf1e29b6118c18f ("perf expr: Add metric literals for topology.")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20211129112339.3003036-1-tmricht@linux.ibm.com
[ Added comment in the added 'if (num_dies)' line about architectures not having die topology ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 30 Nov 2021 13:12:41 +0000 (10:12 -0300)]
tools build: Remove needless libpython-version feature check that breaks test-all fast path
Since
66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use
the tools/build/feature/test-libpython-version.c version in any Makefile
feature check:
$ find tools/ -type f | xargs grep feature-libpython-version
$
The only place where this was used was removed in
66dfdff03d196e51:
- ifneq ($(feature-libpython-version), 1)
- $(warning Python 3 is not yet supported; please set)
- $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
- $(warning If you also have Python 2 installed, then)
- $(warning try something like:)
- $(warning $(and ,))
- $(warning $(and ,) make PYTHON=python2)
- $(warning $(and ,))
- $(warning Otherwise, disable Python support entirely:)
- $(warning $(and ,))
- $(warning $(and ,) make NO_LIBPYTHON=1)
- $(warning $(and ,))
- $(error $(and ,))
- else
- LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
- EXTLIBS += $(PYTHON_EMBED_LIBADD)
- LANG_BINDINGS += $(obj-perf)python/perf.so
- $(call detected,CONFIG_LIBPYTHON)
- endif
And nowadays we either build with PYTHON=python3 or just install the
python3 devel packages and perf will build against it.
But the leftover feature-libpython-version check made the fast path
feature detection to break in all cases except when python2 devel files
were installed:
$ rpm -qa | grep python.*devel
python3-devel-3.9.7-1.fc34.x86_64
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000)
$
As python3 is the norm these days, fix this by just removing the unused
feature-libpython-version feature check, making the test-all fast path
to work with the common case.
With this:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin |& head
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000)
$ cat /tmp/build/perf/feature/test-all.make.output
$
Reviewed-by: James Clark <james.clark@arm.com>
Fixes:
66dfdff03d196e51 ("perf tools: Add Python 3 support")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Wed, 24 Nov 2021 00:12:29 +0000 (16:12 -0800)]
perf tools: Fix SMT detection fast read path
sysfs__read_int() returns 0 on success, and so the fast read path was
always failing.
Fixes:
bb629484d924118e ("perf tools: Simplify checking if SMT is active.")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211124001231.3277836-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 8 Sep 2021 19:09:08 +0000 (16:09 -0300)]
tools headers UAPI: Sync powerpc syscall table file changed by new futex_waitv syscall
To pick the changes in this cset:
a0eb2da92b715d0c ("futex: Wireup futex_waitv syscall")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible (adapted from the x86_64 test output):
# perf trace -e futex_waitv
^C#
# perf trace -v -e futex_waitv
event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
^C#
# perf trace -v -e futex* --max-events 10
event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 221 || id == 449)
mmap size 528384B
? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out)
0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0
0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
221 32 futex sys_futex_time32
221 64 futex sys_futex
221 spu futex sys_futex
422 32 futex_time64 sys_futex sys_futex
449 common futex_waitv sys_futex_waitv
$
This addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YZ%2F1OU9mJuyS2HMa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 25 Nov 2021 07:14:57 +0000 (09:14 +0200)]
perf inject: Fix itrace space allowed for new attributes
The space allowed for new attributes can be too small if existing header
information is large. That can happen, for example, if there are very
many CPUs, due to having an event ID per CPU per event being stored in the
header information.
Fix by adding the existing header.data_offset. Also increase the extra
space allowed to 8KiB and align to a 4KiB boundary for neatness.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20211125071457.2066863-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 8 Sep 2021 19:09:08 +0000 (16:09 -0300)]
tools headers UAPI: Sync s390 syscall table file changed by new futex_waitv syscall
To pick the changes in these csets:
6c122360cf2f4c5a ("s390: wire up sys_futex_waitv system call")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible (adapted from the x86_64 test output):
# perf trace -e futex_waitv
^C#
# perf trace -v -e futex_waitv
event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
^C#
# perf trace -v -e futex* --max-events 10
event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 238 || id == 449)
? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out)
0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0
0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex tools/perf/arch/s390/entry/syscalls/syscall.tbl
238 common futex sys_futex sys_futex_time32
422 32 futex_time64 - sys_futex
449 common futex_waitv sys_futex_waitv sys_futex_waitv
$
This addresses this perf build warnings:
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/lkml/YZ%2F2qRW%2FTScYTP1U@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 22 Nov 2021 13:11:05 +0000 (10:11 -0300)]
Revert "perf bench: Fix two memory leaks detected with ASan"
This: This reverts commit
92723ea0f11d92496687db8c9725248e9d1e5e1d.
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRRRRRRR Ok
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRR FAILED!
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRR Ok
# perf test 91
91: perf stat --bpf-counters test :RRRRRRRRRRRRRRR Ok
yep, it seems the perf bench is broken so the counts won't correlated if
I revert this one:
92723ea0f11d perf bench: Fix two memory leaks detected with ASan
it works for me again.. it seems to break -t option
[root@dell-r440-01 perf]# ./perf bench sched messaging -g 1 -l 100 -t
# Running 'sched/messaging' benchmark:
RRRperf: CLIENT: ready write: Bad file descriptor
Rperf: SENDER: write: Bad file descriptor
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/YZev7KClb%2Fud43Lc@krava/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Salvatore Bonaccorso [Mon, 6 Dec 2021 20:42:01 +0000 (21:42 +0100)]
Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH
Andreas reported that a specific build environment for an external
module, being a bit broken, does pass CC_IMPLICIT_FALLTHROUGH quoted as
argument to gcc, causing an error
gcc-11: error: "-Wimplicit-fallthrough=5": linker input file not found: No such file or directory
Until this is more generally fixed as outlined in [1], by fixing
scripts/link-vmlinux.sh, scripts/gen_autoksyms.sh, etc to not directly
include the include/config/auto.conf, and in a second step, change
Kconfig to generate the auto.conf without "", workaround the issue by
explicitly unquoting CC_IMPLICIT_FALLTHROUGH.
Reported-by: Andreas Beckmann <anbe@debian.org>
Link: https://bugs.debian.org/1001083
Link: https://lore.kernel.org/linux-kbuild/CAK7LNAR-VXwHFEJqCcrFDZj+_4+Xd6oynbj_0eS8N504_ydmyw@mail.gmail.com/
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Hung [Fri, 3 Dec 2021 21:28:10 +0000 (14:28 -0700)]
platform/x86/intel: hid: add quirk to support Surface Go 3
Similar to other systems Surface Go 3 requires a DMI quirk to enable
5 button array for power and volume buttons.
Buglink: https://github.com/linux-surface/linux-surface/issues/595
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Link: https://lore.kernel.org/r/20211203212810.2666508-1-alex.hung@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Mon, 6 Dec 2021 18:46:20 +0000 (10:46 -0800)]
Merge tag 'docs-5.16-3' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A few important documentation fixes, including breakage that comes
with v1.0 of the ReadTheDocs theme"
* tag 'docs-5.16-3' of git://git.lwn.net/linux:
Documentation: Add minimum pahole version
Documentation/process: fix self reference
docs: admin-guide/blockdev: Remove digraph of node-states
docs: conf.py: fix support for Readthedocs v 1.0.0
Linus Torvalds [Mon, 6 Dec 2021 18:22:12 +0000 (10:22 -0800)]
Merge tag 'spi-fix-v5.16-rc4' of git://git./linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"Just one trivial update adding a device ID to the DT bindings"
* tag 'spi-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-rockchip: Add rk3568-spi compatible
Linus Torvalds [Mon, 6 Dec 2021 18:14:12 +0000 (10:14 -0800)]
Merge tag 'regulator-fix-v5.16-rc4' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Documentation fix for v5.17.
A fix for bitrot in the documentation for protection interrupts that
crept in as the code was revised during review"
* tag 'regulator-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Update protection IRQ helper docs
Linus Torvalds [Mon, 6 Dec 2021 18:09:00 +0000 (10:09 -0800)]
Merge tag 'efi-urgent-for-v5.16' of git://git./linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Ensure that the EFI memory map resides in encrypted memory even after
it has been reallocated"
* tag 'efi-urgent-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/sme: Explicitly map new EFI memmap table as encrypted
Linus Torvalds [Sun, 5 Dec 2021 22:08:22 +0000 (14:08 -0800)]
Linux 5.16-rc4
Linus Torvalds [Sun, 5 Dec 2021 20:58:18 +0000 (12:58 -0800)]
Merge tag 'for-5.16/parisc-6' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is
now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
file name
- Fix compiler warnings by annotating parisc agp init functions with
__init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig"
* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
parisc/agp: Annotate parisc agp init functions with __init
parisc: Enable sata sil, audit and usb support on 64-bit defconfig
parisc: Fix KBUILD_IMAGE for self-extracting kernel
Linus Torvalds [Sun, 5 Dec 2021 17:34:57 +0000 (09:34 -0800)]
Merge tag 'usb-5.16-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think there's a
community distro that has not reported this problem yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and
the xhci fix has been reported by many to resolve their reported
problem"
* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
Linus Torvalds [Sun, 5 Dec 2021 17:13:20 +0000 (09:13 -0800)]
Merge tag 'tty-5.16-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes for 5.16-rc4 to
resolve a number of reported problems.
They include:
- liteuart serial driver fixes
- 8250_pci serial driver fixes for pericom devices
- 8250 RTS line control fix while in RS-485 mode
- tegra serial driver fix
- msm_serial driver fix
- pl011 serial driver new id
- fsl_lpuart revert of broken change
- 8250_bcm7271 serial driver fix
- MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1
- vgacon fix for reported problem
All of these, except for the 8250_bcm7271 fix have been in linux-next
with no reported problem. The 8250_bcm7271 fix was added to the tree
on Friday so no chance to be linux-next yet. But it should be fine as
the affected developers submitted it"
* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_bcm7271: UART errors after resuming from S2
serial: 8250_pci: rewrite pericom_do_set_divisor()
serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
serial: 8250: Fix RTS modem control while in rs485 mode
Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
serial: liteuart: relax compile-test dependencies
serial: liteuart: fix minor-number leak on probe errors
serial: liteuart: fix use-after-free and memleak on unbind
serial: liteuart: Fix NULL pointer dereference in ->remove()
vgacon: Propagate console boot parameters before calling `vc_resize'
tty: serial: msm_serial: Deactivate RX DMA for polling support
serial: pl011: Add ACPI SBSA UART match id
serial: core: fix transmit-buffer reset and memleak
MAINTAINERS: Add rpmsg tty driver maintainer
Linus Torvalds [Sun, 5 Dec 2021 16:58:52 +0000 (08:58 -0800)]
Merge tag 'timers_urgent_for_v5.16_rc4' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
mode runs for prolonged periods with interrupts disabled and ends up
programming the next tick in the past, leading to that storm
* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/nohz: Last resort update jiffies on nohz_full IRQ entry
Linus Torvalds [Sun, 5 Dec 2021 16:53:31 +0000 (08:53 -0800)]
Merge tag 'sched_urgent_for_v5.16_rc4' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
Linus Torvalds [Sun, 5 Dec 2021 16:43:35 +0000 (08:43 -0800)]
Merge tag 'x86_urgent_for_v5.16_rc4' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix a couple of SWAPGS fencing issues in the x86 entry code
- Use the proper operand types in __{get,put}_user() to prevent
truncation in SEV-ES string io
- Make sure the kernel mappings are present in trampoline_pgd in order
to prevent any potential accesses to unmapped memory after switching
to it
- Fix a trivial list corruption in objtool's pv_ops validation
- Disable the clocksource watchdog for TSC on platforms which claim
that the TSC is constant, doesn't stop in sleep states, CPU has TSC
adjust and the number of sockets of the platform are max 2, to
prevent erroneous markings of the TSC as unstable.
- Make sure TSC adjust is always checked not only when going idle
- Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
the FPU code
- Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention
* tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
x86/entry: Use the correct fence macro after swapgs in kernel CR3
x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
x86/64/mm: Map all kernel memory into trampoline_pgd
objtool: Fix pv_ops noinstr validation
x86/tsc: Disable clocksource watchdog for TSC on qualified platorms
x86/tsc: Add a timer to make sure TSC_adjust is always checked
x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog()
x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define
Linus Torvalds [Sun, 5 Dec 2021 16:25:33 +0000 (08:25 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull more kvm fixes from Paolo Bonzini:
- Static analysis fix
- New SEV-ES protocol for communicating invalid VMGEXIT requests
- Ensure APICv is considered inactive if there is no APIC
- Fix reserved bits for AMD PerfEvtSeln register
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
KVM: x86/mmu: Retry page fault if root is invalidated by memslot update
KVM: VMX: Set failure code in prepare_vmcs02()
KVM: ensure APICv is considered inactive if there is no APIC
KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register
Tom Lendacky [Wed, 20 Oct 2021 18:02:11 +0000 (13:02 -0500)]
x86/sme: Explicitly map new EFI memmap table as encrypted
Reserving memory using efi_mem_reserve() calls into the x86
efi_arch_mem_reserve() function. This function will insert a new EFI
memory descriptor into the EFI memory map representing the area of
memory to be reserved and marking it as EFI runtime memory. As part
of adding this new entry, a new EFI memory map is allocated and mapped.
The mapping is where a problem can occur. This new memory map is mapped
using early_memremap() and generally mapped encrypted, unless the new
memory for the mapping happens to come from an area of memory that is
marked as EFI_BOOT_SERVICES_DATA memory. In this case, the new memory will
be mapped unencrypted. However, during replacement of the old memory map,
efi_mem_type() is disabled, so the new memory map will now be long-term
mapped encrypted (in efi.memmap), resulting in the map containing invalid
data and causing the kernel boot to crash.
Since it is known that the area will be mapped encrypted going forward,
explicitly map the new memory map as encrypted using early_memremap_prot().
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes:
8f716c9b5feb ("x86/mm: Add support to access boot related data in the clear")
Link: https://lore.kernel.org/all/ebf1eb2940405438a09d51d121ec0d02c8755558.1634752931.git.thomas.lendacky@amd.com/
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ardb: incorporate Kconfig fix by Arnd]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tom Lendacky [Thu, 2 Dec 2021 18:52:05 +0000 (12:52 -0600)]
KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.
The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.
The new error codes are documented in the lasest update to the GHCB
specification.
Fixes:
291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <
b57280b5562893e2616257ac9c2d4525a9aeeb42.
1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 9 Nov 2021 22:23:50 +0000 (22:23 +0000)]
KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available. The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 9 Nov 2021 22:23:49 +0000 (22:23 +0000)]
KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.
Fixes:
8f423a80d299 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sun, 5 Dec 2021 01:22:53 +0000 (17:22 -0800)]
Merge tag 'xfs-5.16-fixes-2' of git://git./fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Remove an unnecessary (and backwards) rename flags check that
duplicates a VFS level check"
* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove incorrect ASSERT in xfs_rename
Linus Torvalds [Sat, 4 Dec 2021 21:43:52 +0000 (13:43 -0800)]
Merge tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three SMB3 multichannel/fscache fixes and a DFS fix.
In testing multichannel reconnect scenarios recently various problems
with the cifs.ko implementation of fscache were found (e.g. incorrect
initialization of fscache cookies in some cases)"
* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: avoid use of dstaddr as key for fscache client cookie
cifs: add server conn_id to fscache client cookie
cifs: wait for tcon resource_id before getting fscache super
cifs: fix missed refcounting of ipc tcon
Helge Deller [Sat, 4 Dec 2021 20:21:46 +0000 (21:21 +0100)]
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
In commit
c8c3735997a3 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour. On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.
This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.
Fixes:
c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
Helge Deller [Sat, 4 Dec 2021 20:14:40 +0000 (21:14 +0100)]
parisc: Fix "make install" on newer debian releases
On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
Linus Torvalds [Sat, 4 Dec 2021 16:38:25 +0000 (08:38 -0800)]
Merge tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"A single fix for repeated printk spam from loop"
* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
loop: Use pr_warn_once() for loop_control_remove() warning
Linus Torvalds [Sat, 4 Dec 2021 16:34:59 +0000 (08:34 -0800)]
Merge tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a single fix preventing repeated retries of task_work based io-wq
thread creation, fixing a regression from when io-wq was made more (a
bit too much) resilient against signals"
* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
io-wq: don't retry task_work creation failure on fatal conditions
Linus Torvalds [Sat, 4 Dec 2021 16:28:42 +0000 (08:28 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
Linus Torvalds [Sat, 4 Dec 2021 16:13:20 +0000 (08:13 -0800)]
Merge tag 'gfs2-v5.16-rc4-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Since commit
486408d690e1 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
- Fix a BUG demoting weak glock holders from a remote node.
* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_create_inode rework
gfs2: gfs2_inode_lookup rework
gfs2: gfs2_inode_lookup cleanup
gfs2: Fix remote demote of weak glock holders
Qais Yousef [Thu, 2 Dec 2021 11:20:33 +0000 (11:20 +0000)]
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
Commit
d81ae8aac85c ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.
The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue
static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
enum uclamp_id clamp_id)
{
...
if (uc_se->value > READ_ONCE(uc_rq->value))
WRITE_ONCE(uc_rq->value, uc_se->value);
}
was actually resetting it. But since commit
d81ae8aac85c changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.
This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.
Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.
Fixes:
d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
Andrew Halaney [Fri, 3 Dec 2021 23:32:03 +0000 (17:32 -0600)]
preempt/dynamic: Fix setup_preempt_mode() return value
__setup() callbacks expect 1 for success and 0 for failure. Correct the
usage here to reflect that.
Fixes:
826bfeb37bb4 ("preempt/dynamic: Support dynamic preempt with preempt= boot option")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
Linus Torvalds [Fri, 3 Dec 2021 20:27:08 +0000 (12:27 -0800)]
Merge tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fix OpRegion pointer arithmetic (Zhenyu Wang)
- Fix comment format triggering kernel-doc warnings (Randy Dunlap)
* tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix OpRegion read
vfio: remove all kernel-doc notation
Linus Torvalds [Fri, 3 Dec 2021 20:22:56 +0000 (12:22 -0800)]
Merge tag 'pm-5.16-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a CPU hot-add issue in the cpufreq core, fix a comment in
the cpufreq core code and update its documentation, and disable the
DTPM (Dynamic Thermal Power Management) code for the time being to
prevent it from causing issues to appear.
Specifics:
- Disable DTPM for this cycle to prevent it from causing issues to
appear on otherwise functional systems (Daniel Lezcano)
- Fix cpufreq sysfs interface failure related to physical CPU hot-add
(Xiongfeng Wang)
- Fix comment in cpufreq core and update its documentation (Tang
Yizhou)"
* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: DTPM: Drop unused local variable from init_dtpm()
cpufreq: docs: Update core.rst
cpufreq: Fix a comment in cpufreq_policy_free
powercap/drivers/dtpm: Disable DTPM at boot time
cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
Linus Torvalds [Fri, 3 Dec 2021 19:46:20 +0000 (11:46 -0800)]
Merge tag 's390-5.16-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix potential overlap of pseudo-MMIO addresses with MIO addresses
- Fix stack unwinder test case inline assembly compile error that
happens with LLVM's integrated assembler
- Update defconfigs
* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/pci: move pseudo-MMIO to prevent MIO overlap
s390/test_unwind: use raw opcode instead of invalid instruction
Linus Torvalds [Fri, 3 Dec 2021 18:50:14 +0000 (10:50 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc4.
One of them is just a trivial documentation fix, whereas the other two
address a warning in the kexec code and a crash in ftrace on systems
implementing BTI.
The latter patch has a couple of ugly ifdefs which Mark plans to clean
up separately, but as-is the patch is straightforward for backporting
to stable kernels.
Summary:
- Add missing BTI landing instructions to the ftrace*_caller
trampolines
- Fix kexec() WARN when DEBUG_VIRTUAL is enabled
- Fix PAC documentation by removing stale references to compiler
flags"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
Linus Torvalds [Fri, 3 Dec 2021 18:44:16 +0000 (10:44 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has another set of driver bugfixes, mostly for the stm32f7 driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: Handle a spurious start completion interrupt flag
i2c: stm32f7: use proper DMAENGINE API for termination
i2c: stm32f7: stop dma transfer in case of NACK
i2c: stm32f7: recover the bus on access timeout
i2c: stm32f7: flush TX FIFO upon transfer errors
i2c: cbus-gpio: set atomic transfer callback
Linus Torvalds [Fri, 3 Dec 2021 18:38:45 +0000 (10:38 -0800)]
Merge tag 'libata-5.16-rc4' of git://git./linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two sparse warning fixes and a couple of patches to fix an issue with
sata_fsl driver module removal:
- A couple of patches to avoid sparse warnings in libata-sata and in
the pata_falcon driver (from Yang and Finn).
- A couple of sata_fsl driver patches fixing IRQ free and proc
unregister on module removal (from Baokun)"
* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: replace snprintf in show functions with sysfs_emit
sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
pata_falcon: Avoid type warnings from sparse
Shyam Prasad N [Thu, 2 Dec 2021 07:46:54 +0000 (07:46 +0000)]
cifs: avoid use of dstaddr as key for fscache client cookie
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Thu, 2 Dec 2021 07:30:00 +0000 (07:30 +0000)]
cifs: add server conn_id to fscache client cookie
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.
Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use. Also addresses minor problem found
by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Thu, 2 Dec 2021 07:14:42 +0000 (07:14 +0000)]
cifs: wait for tcon resource_id before getting fscache super
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Thu, 2 Dec 2021 18:29:35 +0000 (15:29 -0300)]
cifs: fix missed refcounting of ipc tcon
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals. We want to keep it alive as long as mount is active
and can be refreshed. For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.
Fixes:
c88f7dcd6d64 ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Lai Jiangshan [Fri, 26 Nov 2021 10:11:23 +0000 (18:11 +0800)]
x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.
In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.
This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.
And, with XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.
[ bp: Massage commit message. ]
Fixes:
7f2590a110b8 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
Lai Jiangshan [Fri, 26 Nov 2021 10:11:22 +0000 (18:11 +0800)]
x86/entry: Use the correct fence macro after swapgs in kernel CR3
The commit
c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")
removed a CR3 write in the faulting path of load_gs_index().
But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().
Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.
[ bp: Massage commit message and comment. ]
Fixes:
c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
Linus Torvalds [Wed, 1 Dec 2021 18:06:14 +0000 (10:06 -0800)]
fget: check that the fd still exists after getting a ref to it
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit
cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit
cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Fri, 26 Nov 2021 10:11:21 +0000 (18:11 +0800)]
x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
Commit
18ec54fdd6d18 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.
But
96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.
Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.
[ bp: Massage, fix typos, remove obsolete comment while at it. ]
Fixes:
96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
Rafael J. Wysocki [Fri, 3 Dec 2021 17:09:32 +0000 (18:09 +0100)]
Merge branch 'powercap'
Merge DTPM fixes for 5.16-rc4.
* powercap:
powercap: DTPM: Drop unused local variable from init_dtpm()
powercap/drivers/dtpm: Disable DTPM at boot time
Michael Sterritt [Fri, 19 Nov 2021 23:27:57 +0000 (15:27 -0800)]
x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
Properly type the operands being passed to __put_user()/__get_user().
Otherwise, these routines truncate data for dependent instructions
(e.g., INSW) and only read/write one byte.
This has been tested by sending a string with REP OUTSW to a port and
then reading it back in with REP INSW on the same port.
Previous behavior was to only send and receive the first char of the
size. For example, word operations for "abcd" would only read/write
"ac". With change, the full string is now written and read back.
Fixes:
f980f9c31a923 (x86/sev-es: Compile early handler code into kernel image)
Signed-off-by: Michael Sterritt <sterritt@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com
Rafael J. Wysocki [Fri, 3 Dec 2021 16:51:59 +0000 (17:51 +0100)]
powercap: DTPM: Drop unused local variable from init_dtpm()
The dtpm_descr variable in init_dtpm() is not used after commit
f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time"),
so drop it.
Fixes:
f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jens Axboe [Fri, 3 Dec 2021 02:40:15 +0000 (19:40 -0700)]
io-wq: don't retry task_work creation failure on fatal conditions
We don't want to be retrying task_work creation failure if there's
an actual signal pending for the parent task. If we do, then we can
enter an infinite loop of perpetually retrying and each retry failing
with -ERESTARTNOINTR because a signal is pending.
Fixes:
3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/
Tested-by: Florian Fischer <florian.fl.fischer@fau.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Al Cooper [Wed, 1 Dec 2021 20:14:02 +0000 (15:14 -0500)]
serial: 8250_bcm7271: UART errors after resuming from S2
There is a small window in time during resume where the hardware
flow control signal RTS can be asserted (which allows a sender to
resume sending data to the UART) but the baud rate has not yet
been restored. This will cause corrupted data and FRAMING, OVERRUN
and BREAK errors. This is happening because the MCTRL register is
shadowed in uart_port struct and is later used during resume to set
the MCTRL register during both serial8250_do_startup() and
uart_resume_port(). Unfortunately, serial8250_do_startup()
happens before the UART baud rate is restored. The fix is to clear
the shadowed mctrl value at the end of suspend and restore it at the
end of resume.
Fixes:
41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhou Qingyang [Tue, 30 Nov 2021 17:27:00 +0000 (01:27 +0800)]
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring
and there is a dereference of it in cdnsp_endpoint_init(), which could
lead to a NULL pointer dereference on failure of cdnsp_ring_alloc().
Fix this bug by adding a check of pep->ring.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes:
3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@vger.kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Tue, 30 Nov 2021 15:42:39 +0000 (09:42 -0600)]
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
This issue was found at android12 MTP.
1. MTP submit many out urb request.
2. Cancel left requests (>20) when enough data get from host
3. Send ACK by IN endpoint.
4. MTP submit new out urb request.
5. 4's urb never complete.
TRACE LOG:
MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req:
00000000299e6836, req buff
000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0
MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req:
00000000299e6836, req buff
000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0
MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req:
0000000080b7bde6, req buff
000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0
MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req:
0000000080b7bde6, req buff
000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0
....
MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req:
00000000afbccb7d, req buff
0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req:
00000000afbccb7d, req buff
00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard
MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit
MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb
000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr
ffd50414
....
irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out:
01000408 ISP , ep_traddr:
ffd508ac ep_last_sid:
00000000 use_streams: 0
irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb
0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0
irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req:
00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184
Actually DMA pos already bigger than previous submit request
afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong.
The TRB link is below when irq happen.
DEQ LINK LINK LINK LINK LINK .... TRB(
afbccb7d):START DMA(EP_TRADDR).
Original code check LINK TRB, but DEQ just move one step.
LINK DEQ LINK LINK LINK LINK .... TRB(
afbccb7d):START DMA(EP_TRADDR).
This patch skip all LINK TRB and sync DEQ to trb's start.
LINK LINK LINK LINK LINK .... DEQ = TRB(
afbccb7d):START DMA(EP_TRADDR).
Acked-by: Peter Chen <peter.chen@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Badhri Jagan Sridharan [Tue, 30 Nov 2021 00:18:25 +0000 (16:18 -0800)]
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."
This change makes TCPM to wait in SNK_DEBOUNCED state until
CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
This causes TCPM to loop continuously when connected to a
faulty power source that does not present vbus. Waiting in
SNK_DEBOUNCED also ensures that TCPM is adherant to
"4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.
[ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6169.931296] disable vbus discharge ret:0
[ 6169.931301] Setting usb_comm capable false
[ 6169.932783] Setting voltage/current limit 0 mV 0 mA
[ 6169.932802] polarity 0
[ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
[ 6169.936689] cc:=0
[ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 6170.036896] Start toggling
[ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6170.693304] disable vbus discharge ret:0
[ 6170.693308] Setting usb_comm capable false
[ 6170.695193] Setting voltage/current limit 0 mV 0 mA
[ 6170.695210] polarity 0
[ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
[ 6170.701896] cc:=0
[ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
Fixes:
f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ole Ernst [Sat, 27 Nov 2021 09:05:45 +0000 (10:05 +0100)]
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71
Disable LPM to resolve the issue.
Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Fri, 26 Nov 2021 12:23:40 +0000 (14:23 +0200)]
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.
The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.
Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.
The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.
Fixes:
ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Weißschuh [Tue, 30 Nov 2021 06:01:17 +0000 (07:01 +0100)]
HID: intel-ish-hid: ipc: only enable IRQ wakeup when requested
Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on
lid close.
These wakeups are generated by interrupts from the ISH on changes to the
lid status.
By disabling the wake IRQ from the ISH we inhibit these spurious
wakeups while keeping the resume from LID open through the ACPI
interrupt.
Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6
is also affected.
Fixes:
ae02e5d40d5f ("HID: intel-ish-hid: ipc layer")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130060117.3026-1-linux@weissschuh.net
xiazhengqiao [Fri, 3 Dec 2021 03:01:19 +0000 (11:01 +0800)]
HID: google: add eel USB id
Add one additional hammer-like device.
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com
Greg Kroah-Hartman [Fri, 3 Dec 2021 08:12:31 +0000 (09:12 +0100)]
HID: add USB_HID dependancy to hid-prodikeys
The prodikeys HID driver only controls USB devices, yet did not have a
dependancy on USB_HID. This causes build errors on some configurations
like nios2 when building due to new changes to the prodikeys driver.
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org
projects / platform / kernel / linux-starfive.git / log