Sjoerd Simons [Mon, 21 May 2012 09:47:07 +0000 (11:47 +0200)]
pulsesrc: Listen to source output events, not sink input
Mark Nauwelaerts [Fri, 18 May 2012 10:53:44 +0000 (12:53 +0200)]
rtpmp2tpay: respect mtu and packet boundaries
See #659915.
Edward Hervey [Fri, 18 May 2012 09:10:46 +0000 (11:10 +0200)]
jpeg: Remove dead code
Conflicts:
ext/jpeg/gstjpegdec.c
Sebastian Dröge [Fri, 18 May 2012 09:05:35 +0000 (11:05 +0200)]
jpegdec: Fix compilation
Edward Hervey [Fri, 18 May 2012 09:02:52 +0000 (11:02 +0200)]
jpegdec: When dropping frames on EOS, flush out data
Cleaner way of handling stray data
Edward Hervey [Thu, 17 May 2012 07:34:03 +0000 (09:34 +0200)]
jpegdec: Remove unused variable
Conflicts:
ext/jpeg/gstjpegdec.c
Edward Hervey [Thu, 17 May 2012 07:33:18 +0000 (09:33 +0200)]
jpegdec: Only parse for SOI when we didn't see it before
Edward Hervey [Thu, 17 May 2012 07:31:41 +0000 (09:31 +0200)]
jpegdec: Remember if we saw SOI and handle stray data on EOS
Youness Alaoui [Tue, 15 May 2012 20:58:25 +0000 (20:58 +0000)]
rtpjpegpay: Allow U and V components to use different quant tables if they contain the same data
This allows some cameras (Logitech C920) that specify different quant
tables but both with the same data, to work.
Bug reported by Robert Krakora
Tim-Philipp Müller [Mon, 14 May 2012 14:51:29 +0000 (15:51 +0100)]
souphttpsrc: fix possible data corruption after seeking
Consider a downstream element that may issue seeks in very short
succession (e.g. queue2), depending on the access pattern of
the downstream element (e.g. qtdemux with audio/video chunks
interleaved so that there's always a sizeable gap between the
current chunks for each stream). In this case, queue2 will maintain
two ranges, and even when it serves a chunk from memory, it will
switch ranges and make souphttpsrc seek to the end of the available
data for that range, assuming that that's where we'll want to
continue reading from next.
This may lead to the following seek request pattern:
- source reading position A
- seek to B
- now reading position still A, requested_postion is B
- streaming thread to be restarted to continue from B
- seek to A, before streaming thread had time to do the seek
- do_seek() now sees reading position == seek position and
returns early.
- however, requested position is still B from the earlier
seek request
- streaming thread starts up, sees that a seek to B is pending
and requests data from B from the server, while the GstBaseSrc
segment has of course been updated/reset to position A, which
was the last seek request.
- we will now send data for position B and pretend that's the
data from position A (via the newsegment event, etc.)
- this causes data corruption
Reproducible doing seek-emulated fast-forward/backward on 006648.
Sebastian Dröge [Wed, 16 May 2012 07:12:55 +0000 (09:12 +0200)]
configure: Require core/base 0.11.91
Matej Knopp [Fri, 13 Jan 2012 23:09:50 +0000 (18:09 -0500)]
.gitignore: add visual studio IDE files and OS X .DS_Store files
https://bugzilla.gnome.org/show_bug.cgi?id=667899
Sebastian Dröge [Thu, 3 May 2012 07:32:50 +0000 (09:32 +0200)]
jpeg: Port to 0.11 again
Edward Hervey [Fri, 6 Apr 2012 10:13:24 +0000 (12:13 +0200)]
jpeg: Port jpegdec/jpegenc to base video classes
Conflicts:
ext/jpeg/gstjpegdec.c
ext/jpeg/gstjpegdec.h
ext/jpeg/gstjpegenc.c
ext/jpeg/gstjpegenc.h
Reverted to 0.10 versions for now, next port again.
Tim-Philipp Müller [Sun, 13 May 2012 18:21:19 +0000 (19:21 +0100)]
annodex: remove annodex plugin and CMML elements
This never really took off and is most likely completely
unused. If there is still a need for this, it should
probably be done differently, perhaps inside oggdemux/mux.
Sebastian Dröge [Sun, 13 May 2012 14:59:58 +0000 (16:59 +0200)]
Back to development
Sebastian Dröge [Sun, 13 May 2012 14:31:03 +0000 (16:31 +0200)]
Release 0.11.91
Sebastian Dröge [Sun, 13 May 2012 14:30:03 +0000 (16:30 +0200)]
Update .po files
Sebastian Dröge [Sun, 13 May 2012 13:56:05 +0000 (15:56 +0200)]
Automatic update of common submodule
From dc70203 to 3429ba6
Tim-Philipp Müller [Wed, 9 May 2012 14:14:55 +0000 (15:14 +0100)]
rndbuffersize: only send flush-stop if it was a flushing seek
Peter Seiderer [Wed, 9 May 2012 10:54:11 +0000 (12:54 +0200)]
v4l2src: fix v4l2_std_id logging
input.std is of type v4l2_std_id which is defined as 64-bit unsigned integer.
Casting to uint means the higher bits, wich are used for the private video
standards of the TI video capture/display driver for example, are lost.
Tim-Philipp Müller [Wed, 9 May 2012 11:24:37 +0000 (12:24 +0100)]
rndbuffersize: must send flush-stop after acquiring the stream lock
Otherwise the streaming thread might just keep on going and we
might never get the stream lock.
Tim-Philipp Müller [Wed, 9 May 2012 10:15:21 +0000 (11:15 +0100)]
rndbuffersize: port seeking code to 0.11
Tim-Philipp Müller [Tue, 8 May 2012 18:07:04 +0000 (19:07 +0100)]
rndbuffersize: add support for seeks
Useful for e.g. filesrc ! rndbuffersize ! queue2 ! ...
Tim-Philipp Müller [Tue, 8 May 2012 17:45:34 +0000 (18:45 +0100)]
rndbuffersize: send SEGMENT event before pushing buffers
Conflicts:
gst/debugutils/rndbuffersize.c
Wim Taymans [Wed, 9 May 2012 09:15:57 +0000 (11:15 +0200)]
interleave: fix compilation again
Pascal Buhler [Fri, 13 Jan 2012 09:49:43 +0000 (10:49 +0100)]
rtpsession: creation should be signaled before validation
https://bugzilla.gnome.org/show_bug.cgi?id=667850
Thiago Santos [Fri, 4 May 2012 18:20:47 +0000 (15:20 -0300)]
jpegenc: do not proxy our filter caps downstream on caps queries
Downstream likely won't accept video/x-raw and the caps query
will return EMPTY caps. Instead, create a copy of the caps that
has all structure names replaced by 'image/jpeg'
Simple pipeline that shows the problem:
gst-launch-1.0 videotestsrc num-buffers=1 ! "video/x-raw, \
width=(int)640, height=(int)480" ! videoscale ! jpegenc ! \
"image/jpeg, width=(int)800, height=(int)600" ! filesink \
location=/tmp/image.jpg
Alban Browaeys [Wed, 2 May 2012 19:17:43 +0000 (21:17 +0200)]
isomp4: set layout=interleaved on raw audio caps
This fixes a not-negotiated error at least on mov files with
twos audio with two channels and video dvcp. As playbin and gst-launch
sample coming from the qtdemux.c file uses audioconvert and the latter
require format interleaved.
https://bugzilla.gnome.org/show_bug.cgi?id=675326
Руслан Ижбулатов [Wed, 2 May 2012 17:49:56 +0000 (21:49 +0400)]
waveform: No more gstinterfaces
Fixes #675319
Руслан Ижбулатов [Wed, 2 May 2012 16:14:24 +0000 (20:14 +0400)]
directsound: No more gstinterfaces
Fixes #675319
Tim-Philipp Müller [Tue, 1 May 2012 17:58:03 +0000 (18:58 +0100)]
videomixer: change sink pad template name from sink_%d to sink_%u
Wim Taymans [Mon, 30 Apr 2012 09:00:19 +0000 (11:00 +0200)]
interleave: handle EOS on all pads
When all pads go to EOS immediately, we are not negotiated and our collected
function is called (without any available data). Handle this case gracefully.
Conflicts:
gst/interleave/interleave.c
Wim Taymans [Mon, 30 Apr 2012 08:59:31 +0000 (10:59 +0200)]
interleave: improve debugging
Sebastian Dröge [Tue, 1 May 2012 11:31:51 +0000 (13:31 +0200)]
v4l2src: Update for basesrc API changes
Tim-Philipp Müller [Mon, 30 Apr 2012 22:57:28 +0000 (23:57 +0100)]
alpha: don't set up stuff before the input and output formats are known
Fixes crash on startup.
Peter Seiderer [Mon, 30 Apr 2012 12:09:23 +0000 (14:09 +0200)]
multifilesink: don't write stream header twice for first file
Peter Seiderer [Mon, 30 Apr 2012 11:32:41 +0000 (13:32 +0200)]
multifilesink: fix buffer list size calculation in render_list
Fix uninitialized 'size' variable in call to gst_buffer_list_foreach().
Luis de Bethencourt [Mon, 30 Apr 2012 20:58:00 +0000 (21:58 +0100)]
multifile: unnecessary size check
Luis de Bethencourt [Mon, 30 Apr 2012 20:30:56 +0000 (21:30 +0100)]
avi: fix build errors
fix redundant declarations
and also style/indent issues
Vincent Penquerc'h [Thu, 26 Apr 2012 11:47:27 +0000 (12:47 +0100)]
matroska: implement forward snapping keyframe seeking
Requires an index.
Vincent Penquerc'h [Thu, 26 Apr 2012 11:46:11 +0000 (12:46 +0100)]
avi: implement forward snapping keyframe seeking
In pull mode with an index.
Tim-Philipp Müller [Sat, 28 Apr 2012 22:14:24 +0000 (23:14 +0100)]
tests: fix matroskamux unit test after media type changes
Tim-Philipp Müller [Sat, 28 Apr 2012 18:57:51 +0000 (19:57 +0100)]
matroska: update for media type changes
idc-dragon [Tue, 24 Apr 2012 14:08:47 +0000 (16:08 +0200)]
celtdepay: calculate size correctly
The summation was done wrong, causing the de-payloader to exit its loop too
early, before all frames are processed.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674472
Wim Taymans [Tue, 24 Apr 2012 13:57:19 +0000 (15:57 +0200)]
pulsesink: improve debug
Wim Taymans [Tue, 24 Apr 2012 13:34:57 +0000 (15:34 +0200)]
pulsesink: start unmuted when requested
When we explicitely set the mute property to FALSE, connect to pulseaudio with
the PA_STREAM_START_UNMUTED flag set, otherwise pulseaudio will use its
previously used value (which might start the stream muted).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=672401
Wim Taymans [Wed, 25 Apr 2012 07:41:46 +0000 (09:41 +0200)]
v4l2: improve timestamp code
Sample the pipeline clock and device clock closer to eachother to reduce jitter.
Don't subtract the frame duration from the timestamp when we can use the device
timestamps.
Assume a delay of 1 frame in read-write mode.
Wim Taymans [Tue, 24 Apr 2012 10:37:33 +0000 (12:37 +0200)]
v4l2: use driver timestamps
Use the drive timestamps for timestamping outgoing buffers.
Wim Taymans [Mon, 23 Apr 2012 16:01:31 +0000 (18:01 +0200)]
v4l2: Improve buffer management
Query the amount of available buffers when doing set_config(). This allows us to
configure the parent bufferpool with the number of buffers to preallocate.
Keep track of the provided allocator and use it when we need to allocate a
buffer in RW mode.
When we are can not allocate the requested max_buffers amount of buffers, make
sure we keep 2 buffers around in the pool and copy them into an output buffer.
This makes sure that we always have a buffer to capture into. We also need to
detect those copied buffers and unref them when they return to the pool.
Wim Taymans [Mon, 23 Apr 2012 14:51:28 +0000 (16:51 +0200)]
v4l2: free the queued buffers
Only free the queued buffers that we keep track of in our buffer array. for rw
io-mode, we do allocate buffers but we don't keep track of them in the buffer
array.
Wim Taymans [Mon, 23 Apr 2012 14:10:17 +0000 (16:10 +0200)]
v4l2: mark memory as no-share
We don't support sharing our mmapped memory so mark it as NO_SHARE.
Wim Taymans [Mon, 23 Apr 2012 14:09:55 +0000 (16:09 +0200)]
v4l2: remove old unused file
Wim Taymans [Mon, 23 Apr 2012 11:32:48 +0000 (13:32 +0200)]
v4l2: remove unused function
Bastien Nocera [Wed, 11 Apr 2012 11:42:17 +0000 (12:42 +0100)]
soup: Handle icy and icyx URI schemes
As handled by QuickTime (for icy), and Orban/Coding Technologies
AAC/aacPlus Player (for icyx). See also:
https://bugzilla.gnome.org/show_bug.cgi?id=394207
https://bugzilla.gnome.org/show_bug.cgi?id=403285
https://bugzilla.gnome.org/show_bug.cgi?id=673899
Mart Raudsepp [Mon, 23 Apr 2012 07:03:19 +0000 (10:03 +0300)]
docs: Add Since tag for new GstV4l2Src::prepare-format signal
Chris Pankow [Mon, 23 Apr 2012 08:07:12 +0000 (10:07 +0200)]
audiofxbasefirfilter: Fix time-domain convolution for multichannel input
Fixes bug #674025.
Mark Nauwelaerts [Sat, 21 Apr 2012 09:08:51 +0000 (11:08 +0200)]
po: remove some more non-existent files from the list
Руслан Ижбулатов [Sat, 21 Apr 2012 06:05:45 +0000 (10:05 +0400)]
po: Remove non-existent potfiles from the list
Fixes #674518
Mark Nauwelaerts [Fri, 20 Apr 2012 16:13:15 +0000 (18:13 +0200)]
tests: oss4: limit test scope
Mark Nauwelaerts [Fri, 20 Apr 2012 16:13:01 +0000 (18:13 +0200)]
oss4: port to 0.11
Mark Nauwelaerts [Fri, 20 Apr 2012 16:12:54 +0000 (18:12 +0200)]
oss: port to 0.11
Wim Taymans [Fri, 20 Apr 2012 14:49:56 +0000 (16:49 +0200)]
multipartdemux: first activate pad then set caps
Wim Taymans [Fri, 20 Apr 2012 11:35:15 +0000 (13:35 +0200)]
matroskamux: set caps on srcpad
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674219
Wim Taymans [Thu, 19 Apr 2012 12:16:01 +0000 (14:16 +0200)]
v4l2: update for video api change
Wim Taymans [Thu, 19 Apr 2012 10:38:58 +0000 (12:38 +0200)]
v4l2: fix compilation on older v4l2
Fix compilation on systems where the H264 format is not defined.
Sebastian Dröge [Thu, 19 Apr 2012 10:20:59 +0000 (12:20 +0200)]
video: Update for libgstvideo API changes
Youness Alaoui [Thu, 19 Apr 2012 08:27:01 +0000 (08:27 +0000)]
v4l2src: Allow mpeg-ts cameras to negociate format
This removes an ugly hack until the reason for the hack can be documented
Sebastian Dröge [Thu, 19 Apr 2012 07:50:25 +0000 (09:50 +0200)]
v4l2src: Fix merge
Sebastian Dröge [Thu, 19 Apr 2012 07:40:53 +0000 (09:40 +0200)]
v4l2src: Rename pre-set-format signal to prepare-format
Youness Alaoui [Mon, 16 Apr 2012 22:08:21 +0000 (22:08 +0000)]
v4l2src: Add H264 encoded stream support to the caps
This is not enough to properly support H264 cameras, but it will
allow an H264 stream to be generated by v4l2src using the default
settings of the camera. If used with the pre-set-format signal, the
H264 encoder can be fully configured.
Conflicts:
sys/v4l2/gstv4l2object.c
Youness Alaoui [Mon, 16 Apr 2012 22:06:21 +0000 (22:06 +0000)]
v4l2src: Adding a pre-set-format signal
In order to support UVC H264 encoding cameras, an H264 Probe&Commit
must happen before the normal v4l2 set-format. This new signal is
meant to allow an external application or bin to do it.
It also serves to expose the file descriptor used by v4l2src in case
some custom ioctls need to be called.
Conflicts:
sys/v4l2/Makefile.am
sys/v4l2/gstv4l2src.c
sys/v4l2/v4l2src_calls.c
Mark Nauwelaerts [Wed, 18 Apr 2012 15:09:45 +0000 (17:09 +0200)]
dv1394: port to 0.11
Mark Nauwelaerts [Tue, 17 Apr 2012 13:14:27 +0000 (15:14 +0200)]
collectpads2: rename to collectpads
Mark Nauwelaerts [Mon, 16 Apr 2012 14:37:49 +0000 (16:37 +0200)]
misc: chain up to collectpads event handler
Sebastian Dröge [Mon, 16 Apr 2012 07:09:11 +0000 (09:09 +0200)]
Automatic update of common submodule
From 6db25be to dc70203
Tim-Philipp Müller [Sun, 15 Apr 2012 21:49:47 +0000 (22:49 +0100)]
shout2: update for ogg media type changes
Mark Nauwelaerts [Fri, 13 Apr 2012 14:54:53 +0000 (16:54 +0200)]
smpte: use some more boilerplate
Mark Nauwelaerts [Fri, 13 Apr 2012 14:54:50 +0000 (16:54 +0200)]
flxdec: improve segment handling
... to send a proper TIME segment downstream.
Mark Nauwelaerts [Fri, 13 Apr 2012 14:54:46 +0000 (16:54 +0200)]
flxdec: port to 0.11
Mark Nauwelaerts [Fri, 13 Apr 2012 14:54:42 +0000 (16:54 +0200)]
videobox: adjust to deprecated GMutex setup
Mark Nauwelaerts [Fri, 13 Apr 2012 14:54:38 +0000 (16:54 +0200)]
videobox: port to 0.11
Mark Nauwelaerts [Fri, 13 Apr 2012 14:54:31 +0000 (16:54 +0200)]
alpha, smpte: adjust to removed color-matrix caps field
Víctor Manuel Jáquez Leal [Fri, 13 Apr 2012 14:27:34 +0000 (16:27 +0200)]
v4l2: ensure autogenerated files are created
The tuner marshal and enumtypes are autogenerated, and they need
to be created before the compilation of gstv4l2tuner.c
This patch adds the automake instruction for ensuring the
autogeneration of those files previous the compilation.
Sebastian Dröge [Fri, 13 Apr 2012 11:41:44 +0000 (13:41 +0200)]
configure: Modernize autotools setup a bit
Also we now only create tar.bz2 and tar.xz tarballs.
Sebastian Dröge [Fri, 13 Apr 2012 11:37:10 +0000 (13:37 +0200)]
Automatic update of common submodule
From 464fe15 to 6db25be
Sebastian Dröge [Fri, 13 Apr 2012 11:04:12 +0000 (13:04 +0200)]
Update everything for the removal of the interface library and mixer/tuner interfaces
Edward Hervey [Thu, 12 Apr 2012 13:50:16 +0000 (15:50 +0200)]
rtp: Use unchecked variant of GstByteWriter where applicable
The size was checked before
Edward Hervey [Thu, 12 Apr 2012 13:49:44 +0000 (15:49 +0200)]
matroska: Check return value of GstByteReader/Writer
Edward Hervey [Thu, 12 Apr 2012 13:48:57 +0000 (15:48 +0200)]
isomp4: Check return value of GstByteWriter
And use unchecked variant of GstByteReader where applicable
Edward Hervey [Thu, 12 Apr 2012 13:48:00 +0000 (15:48 +0200)]
flvdemux: Use unchecked variant of GstByteReader
We know there's at least 7 bytes (checked above)
Edward Hervey [Thu, 12 Apr 2012 13:47:49 +0000 (15:47 +0200)]
avi: Check return value of GstByteWriter
Edward Hervey [Thu, 12 Apr 2012 13:47:24 +0000 (15:47 +0200)]
audioparsers: Check return value of GstBitReader/GstByteReader
uraeus [Thu, 12 Apr 2012 10:57:59 +0000 (11:57 +0100)]
Add interleave plugin to spec file
Sebastian Dröge [Thu, 12 Apr 2012 09:19:01 +0000 (11:19 +0200)]
Back to development
Sebastian Dröge [Thu, 12 Apr 2012 08:27:31 +0000 (10:27 +0200)]
Release 0.11.90
Sebastian Dröge [Thu, 12 Apr 2012 08:26:52 +0000 (10:26 +0200)]
Update .po files
Руслан Ижбулатов [Tue, 10 Apr 2012 20:19:30 +0000 (00:19 +0400)]
Fix format string
Fixes #673859
Руслан Ижбулатов [Tue, 10 Apr 2012 20:19:16 +0000 (00:19 +0400)]
Remove unused variable
Fixes #673859
Mark Nauwelaerts [Tue, 10 Apr 2012 09:57:53 +0000 (11:57 +0200)]
Merge remote-tracking branch 'origin/0.10'
Conflicts:
gst/flv/gstflvdemux.c
gst/matroska/matroska-demux.c